Pages : 1
#1 Le 02/09/2015, à 19:23
- LESCAMELA
Partition
Bonjour,
J'ai installé Ubuntu14.04.3 sur mon ordi à la place de Windows 10. Je souhaite réinstaller windows en dual boot mais je n'y arrive pas. Je démarre l'ordi sur le DVD windows mais rien ne se passe. Je n'arrive pas non plus à partitionner mon disque en utilisant Gparted. Je n'ai plus de partition NTFS. Bref je nage. Quelqu'un peut-il m'aider ?
Hors ligne
#2 Le 02/09/2015, à 19:31
- malbo
Re : Partition
Je te prie de démarrer une session de ton Ubuntu installé, de faire un Boot-Info depuis cette session et de donner l'URL de ce Boot-Info dans ta réponse.
D'autre part, peux-tu donner le nom du modèle de ton ordi et son fabricant ?
Hors ligne
#3 Le 02/09/2015, à 19:39
- cqfd93
Re : Partition
Bonjour,
@LESCAMELA : j'ai supprimé ton deuxième message qui n'était qu'une citation du premier sans information supplémentaire.
Par ailleurs, le lien "Signaler aux modérateurs" ne doit pas être utilisé pour attirer l'attention sur ton problème mais seulement en cas de problème de contenu de message en infraction avec les règles du forum (spam, insultes...)
− cqfd93 −
Hors ligne
#4 Le 02/09/2015, à 22:23
- LESCAMELA
Re : Partition
Bonjour et merci de ton retour.
Voici l'URL : http://paste.ubuntu.com/12256605/
L'ordinateur n'a pas de marque ni de modèle. Il a été monté.
Hors ligne
#5 Le 02/09/2015, à 22:42
- LESCAMELA
Re : Partition
Bonjour et merci de ton retour.
Voici l'URL : http://paste.ubuntu.com/12256605/
L'ordinateur n'a pas de marque ni de modèle. Il a été monté.
Hors ligne
#6 Le 02/09/2015, à 22:47
- ikewdu
Re : Partition
Bonjour,
Je démarre l'ordi sur le DVD windows mais rien ne se passe.
Ton premier problème, c'est ça. Il n'y a pas de "raison" que le DVD ne démarre pas. Vérifie ton bios (ordre de boot), le lecteur DVD et e DVD lui-même.
Je n'arrive pas non plus à partitionner mon disque en utilisant Gparted. Je n'ai plus de partition NTFS. Bref je nage. Quelqu'un peut-il m'aider ?
Si tu tentes de le faire depuis ton Linux installé, c'est "un peu" normal. Essaie depuis le live-cd. Mais pour faire un dual-boot, inutile de formater ton Ubuntu.
Dernière modification par ikewdu (Le 02/09/2015, à 22:49)
Hors ligne
#7 Le 02/09/2015, à 23:57
- Bougron
Re : Partition
Bonsoir
Ton boot-info a un peu parlé.
Dans ce groupe, on installe souvent ubuntu après windows, Personnellement j'ai souvent installé windows après ubuntu.
Je peux te dire une chose importante: IL faut environ un espace entre 40 et 60 Go de libre (ou formaté NTFS et surtout pas EXT4 qu'il ne connait pas ) pour qu'il s'installe.
Ton boot-info, montre qu'il n'y a rien de libre. Je pense que l'installateur de windows a un bug et qu'il n'a pas prévu que ce cas pouvait lui arriver.
Je te conseille, avec gparted de lui faire un peu de place dans SDA1. Cela devrait être possible de retrécir cette partition car il y a 839G de libre.
=================== parted -l:
Model: ATA WDC WD10EADS-65L (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 987GB 987GB primary ext4 boot
2 987GB 1000GB 12.9GB extended
5 987GB 1000GB 12.9GB logical linux-swap(v1)
Cependant, je ne suis pas très sur de moi, car avec windows 10 j'étais prévenu qu'il n'y avait pas de place.
Dernière modification par Bougron (Le 03/09/2015, à 00:01)
Hors ligne
#8 Le 03/09/2015, à 05:24
- malbo
Re : Partition
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 1,928,376,319 1,928,374,272 83 Linux
/dev/sda2 1,928,378,366 1,953,523,711 25,145,346 5 Extended
/dev/sda5 1,928,378,368 1,953,523,711 25,145,344 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 28d526af-ab00-4a20-99b0-1e863241179a ext4
/dev/sda5 929c48c2-1863-4f11-9361-7731d964949f swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Sep 2 22:15 ata-TSSTcorpDVD-ROM_SH-D163B -> ../../sr1
lrwxrwxrwx 1 root root 9 Sep 2 22:15 ata-TSSTcorp_CDDVDW_SH-S223L_0X23456789DLMNOP -> ../../sr0
lrwxrwxrwx 1 root root 9 Sep 2 22:18 ata-WDC_WD10EADS-65L5B1_WD-WCAU4C062775 -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 2 22:15 ata-WDC_WD10EADS-65L5B1_WD-WCAU4C062775-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep 2 22:15 ata-WDC_WD10EADS-65L5B1_WD-WCAU4C062775-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Sep 2 22:15 ata-WDC_WD10EADS-65L5B1_WD-WCAU4C062775-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 Sep 2 22:18 wwn-0x50014ee1ac755176 -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 2 22:15 wwn-0x50014ee1ac755176-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep 2 22:15 wwn-0x50014ee1ac755176-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Sep 2 22:15 wwn-0x50014ee1ac755176-part5 -> ../../sda5
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,errors=remount-ro)
/dev/sr0 /media/claude/CDROM udf (ro,nosuid,nodev,uid=1000,gid=1000,iocharset=utf8,umask=0077,uhelper=udisks2)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 28d526af-ab00-4a20-99b0-1e863241179a
else
search --no-floppy --fs-uuid --set=root 28d526af-ab00-4a20-99b0-1e863241179a
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-28d526af-ab00-4a20-99b0-1e863241179a' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 28d526af-ab00-4a20-99b0-1e863241179a
else
search --no-floppy --fs-uuid --set=root 28d526af-ab00-4a20-99b0-1e863241179a
fi
linux /boot/vmlinuz-3.19.0-26-generic root=UUID=28d526af-ab00-4a20-99b0-1e863241179a ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.19.0-26-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-28d526af-ab00-4a20-99b0-1e863241179a' {
menuentry 'Ubuntu, with Linux 3.19.0-26-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-26-generic-advanced-28d526af-ab00-4a20-99b0-1e863241179a' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 28d526af-ab00-4a20-99b0-1e863241179a
else
search --no-floppy --fs-uuid --set=root 28d526af-ab00-4a20-99b0-1e863241179a
fi
echo 'Loading Linux 3.19.0-26-generic ...'
linux /boot/vmlinuz-3.19.0-26-generic root=UUID=28d526af-ab00-4a20-99b0-1e863241179a ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.19.0-26-generic
}
menuentry 'Ubuntu, with Linux 3.19.0-26-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-26-generic-recovery-28d526af-ab00-4a20-99b0-1e863241179a' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 28d526af-ab00-4a20-99b0-1e863241179a
else
search --no-floppy --fs-uuid --set=root 28d526af-ab00-4a20-99b0-1e863241179a
fi
echo 'Loading Linux 3.19.0-26-generic ...'
linux /boot/vmlinuz-3.19.0-26-generic root=UUID=28d526af-ab00-4a20-99b0-1e863241179a ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.19.0-26-generic
}
menuentry 'Ubuntu, with Linux 3.19.0-25-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-25-generic-advanced-28d526af-ab00-4a20-99b0-1e863241179a' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 28d526af-ab00-4a20-99b0-1e863241179a
else
search --no-floppy --fs-uuid --set=root 28d526af-ab00-4a20-99b0-1e863241179a
fi
echo 'Loading Linux 3.19.0-25-generic ...'
linux /boot/vmlinuz-3.19.0-25-generic root=UUID=28d526af-ab00-4a20-99b0-1e863241179a ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.19.0-25-generic
}
menuentry 'Ubuntu, with Linux 3.19.0-25-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-25-generic-recovery-28d526af-ab00-4a20-99b0-1e863241179a' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 28d526af-ab00-4a20-99b0-1e863241179a
else
search --no-floppy --fs-uuid --set=root 28d526af-ab00-4a20-99b0-1e863241179a
fi
echo 'Loading Linux 3.19.0-25-generic ...'
linux /boot/vmlinuz-3.19.0-25-generic root=UUID=28d526af-ab00-4a20-99b0-1e863241179a ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.19.0-25-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 28d526af-ab00-4a20-99b0-1e863241179a
else
search --no-floppy --fs-uuid --set=root 28d526af-ab00-4a20-99b0-1e863241179a
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 28d526af-ab00-4a20-99b0-1e863241179a
else
search --no-floppy --fs-uuid --set=root 28d526af-ab00-4a20-99b0-1e863241179a
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=28d526af-ab00-4a20-99b0-1e863241179a / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=929c48c2-1863-4f11-9361-7731d964949f none swap sw 0 0
--------------------------------------------------------------------------------
=============================== StdErr Messages: ===============================
cat: write error: Broken pipe
ADDITIONAL INFORMATION :
=================== log of boot-info 2015-09-02__22h18 ===================
boot-info version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-info is executed in installed-session (Ubuntu 14.04.3 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.19.0-26-generic root=UUID=28d526af-ab00-4a20-99b0-1e863241179a ro quiet splash vt.handoff=7
=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 14.04.3 LTS CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="28d526af-ab00-4a20-99b0-1e863241179a" TYPE="ext4"
/dev/sda5: UUID="929c48c2-1863-4f11-9361-7731d964949f" TYPE="swap"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Avertissement : la partition étendue ne commence pas sur une frontière de
cylindres. DOS et Linux interpréteront les contenus différemment.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 août 5 07:20 grub.d
total 76
-rwxr-xr-x 1 root root 9424 juin 26 13:16 00_header
-rwxr-xr-x 1 root root 6058 mai 13 16:51 05_debian_theme
-rwxr-xr-x 1 root root 11608 juin 26 13:16 10_linux
-rwxr-xr-x 1 root root 10412 juin 26 13:16 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 juin 26 13:16 30_os-prober
-rwxr-xr-x 1 root root 1416 juin 26 13:16 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juin 26 13:16 40_custom
-rwxr-xr-x 1 root root 216 juin 26 13:16 41_custom
-rw-r--r-- 1 root root 483 juin 26 13:16 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, .
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA WDC WD10EADS-65L (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 987GB 987GB primary ext4 boot
2 987GB 1000GB 12.9GB extended
5 987GB 1000GB 12.9GB logical linux-swap(v1)
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:512:msdos:ATA WDC WD10EADS-65L;
1:1049kB:987GB:987GB:ext4::boot;
2:987GB:1000GB:12.9GB:::;
5:987GB:1000GB:12.9GB:linux-swap(v1)::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 931,5G WDC WD10EADS
sda1 part ext4 919,5G 28d526af-ab00-4a20-99b0-1e863241179a
sda2 part 1K
sda5 part swap 12G 929c48c2-1863-4f11-9361-7731d964949f
sr0 rom 2,6G CDDVDW SH-S2
sr1 rom 1024M DVD-ROM SH-D
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /
sda2 1 0 0
sda5 1 0 0 [SWAP]
sr0 1 0 1 running /media/claude/CDROM
sr1 1 0 1 running
=================== mount:
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=claude)
/dev/sr0 on /media/claude/CDROM type udf (ro,nosuid,nodev,uid=1000,gid=1000,iocharset=utf8,umask=0077,uhelper=udisks2)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr1 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse fw0 hidraw0 hidraw1 hidraw2 hpet i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 input kmsg kvm log mapper mcelog mem memory_bandwidth net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sg0 sg1 sg2 shm snapshot snd sr0 sr1 stderr stdin stdout uhid uinput urandom vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
ls: impossible d'accéder à : Aucun fichier ou dossier de ce type
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda1 ext4 905G 21G 839G 3% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
udev devtmpfs 5.9G 12K 5.9G 1% /dev
tmpfs tmpfs 1.2G 1.5M 1.2G 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 5.9G 148K 5.9G 1% /run/shm
none tmpfs 100M 36K 100M 1% /run/user
/dev/sr0 udf 2.6G 2.6G 0 100% /media/claude/CDROM
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000b8952
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1928376319 964187136 83 Linux
/dev/sda2 1928378366 1953523711 12572673 5 Extended
/dev/sda5 1928378368 1953523711 12572672 82 Linux swap / Solaris
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04.3 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== User settings
The settings chosen by the user will not act on the boot.
Dans l'extrait suivant, on peut voir que le taux d'occupation de ta partition racine de Ubuntu est assez faible (21 Go) :
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda1 ext4 905G 21G 839G 3% /
Ce qui signifie que tu as peu de données dans cette partition. Aussi je te recommande le scénario suivant :
1) sauvegarde sur disque dur externe ou sur clé USB des données que tu peux avoir dans cette partition
2) installation de Windows 10 sans tenir compte de Ubuntu en écrasant tout ce qu'il y a sur le disque dur et vérification que Windows 10 fonctionne bien (*).
3) installation toute neuve de Ubuntu en cohabitation avec Windows 10 en faisant attention à installer Ubuntu dans le même mode que Windows 10 (voir tuto)
(*) si tu "nages" pour installer Windows 10 tout seul dans ce disque dur, demande de l'aide sur un forum Windows
Dernière modification par malbo (Le 03/09/2015, à 05:26)
Hors ligne
#9 Le 03/09/2015, à 19:03
- LESCAMELA
Re : Partition
Bonjour, encore merci pour vos réponses.
J'avais Windows 10 sur mon PC, j'ai fait un dual boot avec Mint 16, j'ai aussi installé Ubuntu et tout fonctionnait très bien. En allumant le PC je choisissais mon système d'exploit. Seulement l'ordre me génait, window s'allumait par défaut. J'ai souhaité que Ubuntu s'allume par défaut, alors j'ai viré Mint 16 et réinstallé Ubuntu mais "a la place de windows" cette fois-ci. Et là impossible de remettre Windows. Il semble que je n'ai plus de mbr ni de partition NTFS. J'ai essayé d'installer en dual boot, windows 7, Handylinux, Opensuse, Mint 17 mais ça ne marche pas. Mon PC redémarre systématiquement sur Ubuntu. Merci de votre aide.
Hors ligne
#10 Le 03/09/2015, à 19:33
- Bougron
Re : Partition
Bonsoir
Ce que tu as sur le disque n'a pas d'importance.
Il faut que tu trouves soit le cdrom/dvdrom d'installation de windows, soit la clé USB au cas ou cela serait windows10.
Il faut que tu mettes en route en allant immédiatement dans le bios.
Si tu ne sais pas faire et que la mise en route de ubuntu te propose un choix, en prenant la dernière ligne tu seras dans le bios.
Dans le bios il faut que tu mettes prioritaire le support de boot (cdrom ou clé USB) par rapport au disque.
Et cela devrait démarrer
Hors ligne
#11 Le 03/09/2015, à 20:58
- LESCAMELA
Re : Partition
Bonsoir,
Je sais faire, aller dans le bios et choisir de démarrer sur le CD/DVD. C'est de cette façon que j'ai installé Ubuntu et Mint 16. Mais ça ne marche pas quand je veux réinstaller windows. Ubuntu démarre systématiquement.
Hors ligne
#12 Le 03/09/2015, à 22:47
- ikewdu
Re : Partition
Re,
Je t'ai dit plus haut de vérifier ton lecteur de DVD... il est peut-être simplement HS. Sinon fabrique une clé usb bootable de ton W7.
Hors ligne
Pages : 1