#1 Le 03/09/2015, à 11:01
- fench
Installation d'une pédale de transcription
Bonjour à tous,
J'ai une pédale de transcription : Olympus AS-2400
Je n'essaye pas d'installer le programme de transcription inclus avec. Il n'y a rien pour Linux sur le CD.
J'aimerais attribuer des fonctions multimédia (comme sur les claviers multimédia).
J'ai donc suivi ce tutoriel : http://www.laspic.eu/configurer-une-ped … ous-ubuntu
Il trouve bien la prédale :
$ lsusb
Bus 002 Device 005: ID 07b4:0218 Olympus Optical Co., Ltd
Bus 002 Device 004: ID 192f:0416 Avago Technologies, Pte. ADNS-5700 Optical Mouse Controller (3-button)
Bus 002 Device 003: ID 413c:2101 Dell Computer Corp. SmartCard Reader Keyboard
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubEnsuite je lance evtest : J'appuie sur la pédale de gauche puis je relache ensuite celle du millieu puis je relache et enfin celle de droite et je relache :
$ sudo evtest
No device specified, trying to scan all of /dev/input/event*
Available devices:
/dev/input/event0: Power Button
/dev/input/event1: Power Button
/dev/input/event2: Dell Dell Smart Card Reader Keyboard
/dev/input/event3: USB Optical Mouse
/dev/input/event4: OLYMPUS IMAGING CORP. HID FootSwitch RS Series
/dev/input/event5: Eee PC WMI hotkeys
/dev/input/event6: HDA Intel PCH Front Headphone
/dev/input/event7: HDA Intel PCH Line Out
/dev/input/event8: HDA Intel PCH Line
/dev/input/event9: HDA Intel PCH Rear Mic
/dev/input/event10: HDA Intel PCH Front Mic
/dev/input/event11: HDA ATI HDMI HDMI/DP,pcm=3
Select the device event number [0-11]: 4
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x7b4 product 0x218 version 0x111
Input device name: "OLYMPUS IMAGING CORP. HID FootSwitch RS Series"
Supported events:
Event type 0 (EV_SYN)
Event type 1 (EV_KEY)
Event code 256 (BTN_0)
Event code 257 (BTN_1)
Event code 258 (BTN_2)
Event code 259 (BTN_3)
Event code 260 (BTN_4)
Event code 261 (BTN_5)
Event code 262 (BTN_6)
Event code 263 (BTN_7)
Event code 264 (BTN_8)
Event code 265 (BTN_9)
Event code 266 (?)
Event code 267 (?)
Event code 268 (?)
Event code 269 (?)
Event code 270 (?)
Event code 271 (?)
Event code 272 (BTN_LEFT)
Event code 273 (BTN_RIGHT)
Event code 274 (BTN_MIDDLE)
Event code 275 (BTN_SIDE)
Event code 276 (BTN_EXTRA)
Event code 277 (BTN_FORWARD)
Event code 278 (BTN_BACK)
Event code 279 (BTN_TASK)
Event code 280 (?)
Event code 281 (?)
Event code 282 (?)
Event code 283 (?)
Event code 284 (?)
Event code 285 (?)
Event code 286 (?)
Event code 287 (?)
Event type 4 (EV_MSC)
Event code 4 (MSC_SCAN)
Properties:
Testing ... (interrupt to exit)
Event: time 1441269406.367390, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90011
Event: time 1441269406.367390, type 1 (EV_KEY), code 272 (BTN_LEFT), value 1
Event: time 1441269406.367390, -------------- SYN_REPORT ------------
Event: time 1441269406.479386, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90011
Event: time 1441269406.479386, type 1 (EV_KEY), code 272 (BTN_LEFT), value 0
Event: time 1441269406.479386, -------------- SYN_REPORT ------------
Event: time 1441269408.207388, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90013
Event: time 1441269408.207388, type 1 (EV_KEY), code 274 (BTN_MIDDLE), value 1
Event: time 1441269408.207388, -------------- SYN_REPORT ------------
Event: time 1441269408.327388, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90013
Event: time 1441269408.327388, type 1 (EV_KEY), code 274 (BTN_MIDDLE), value 0
Event: time 1441269408.327388, -------------- SYN_REPORT ------------
Event: time 1441269409.679388, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90012
Event: time 1441269409.679388, type 1 (EV_KEY), code 273 (BTN_RIGHT), value 1
Event: time 1441269409.679388, -------------- SYN_REPORT ------------
Event: time 1441269409.791387, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90012
Event: time 1441269409.791387, type 1 (EV_KEY), code 273 (BTN_RIGHT), value 0
Event: time 1441269409.791387, -------------- SYN_REPORT ------------Dans /etc/udev/hwdb.d/90-custom-keyboard.hwdb, j'ai écris :
keyboard:usb:v07B4p0218*
KEYBOARD_KEY_0x90013=mutePuis j'ai fais lancer le commandes suivantes pour rendre le changement effectif :
$ sudo udevadm -d hwdb --update;sudo udevadm -d control --reload
calling: hwdb
reading file '/lib/udev/hwdb.d/20-OUI.hwdb'
reading file '/lib/udev/hwdb.d/20-acpi-vendor.hwdb'
reading file '/lib/udev/hwdb.d/20-bluetooth-vendor-product.hwdb'
reading file '/lib/udev/hwdb.d/20-libgphoto2-6.hwdb'
reading file '/lib/udev/hwdb.d/20-pci-classes.hwdb'
reading file '/lib/udev/hwdb.d/20-pci-vendor-model.hwdb'
reading file '/lib/udev/hwdb.d/20-usb-classes.hwdb'
reading file '/lib/udev/hwdb.d/20-usb-vendor-model.hwdb'
reading file '/lib/udev/hwdb.d/60-keyboard.hwdb'
reading file '/etc/udev/hwdb.d/90-custom-keyboard.hwdb'
=== trie in-memory ===
nodes: 1705340 bytes ( 85267)
children arrays: 682128 bytes ( 85266)
values arrays: 540336 bytes ( 67542)
strings: 1267027 bytes
strings incoming: 3154478 bytes ( 209569)
strings dedup'ed: 1943236 bytes ( 153785)
=== trie on-disk ===
size: 5758443 bytes
header: 80 bytes
nodes: 2046408 bytes ( 85267)
child pointers: 1364256 bytes ( 85266)
value pointers: 1080672 bytes ( 67542)
string store: 1267027 bytes
strings start: 4491416
calling: controlQuand j'appuie sur le bouton du millieu, ça devrait couper mon son mais ca ne réagi pas.
Je me suis certainement trompé quelque part.
Queqlu'un pourrait m'aider à configurer ma pédale ?
Pour info : La finalité de l'installation est de l'utiliser sur l'addon Transcriber sur LibreOffice. J'ai déjà testé cette partie là avec un clavier multimedia.
Dernière modification par fench (Le 03/09/2015, à 15:23)
Desktop : Xubuntu 16.04.6 LTS
Portable : Xubuntu 18.04 LTS
Hors ligne
#2 Le 07/09/2015, à 10:08
- fench
Re : Installation d'une pédale de transcription
Up
Desktop : Xubuntu 16.04.6 LTS
Portable : Xubuntu 18.04 LTS
Hors ligne