Pages : 1
#1 Le 08/08/2008, à 15:37
- flo360
Wifi sur un portable neuf - compat wireless
Bonjour,
Voici les commandes demandées par le staff :
floo@floolaptop:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=8.04
DISTRIB_CODENAME=hardy
DISTRIB_DESCRIPTION="Ubuntu 8.04.1"
floo@floolaptop:~$ lsusb
Bus 008 Device 003: ID 046d:09b8 Logitech, Inc.
Bus 008 Device 001: ID 0000:0000
Bus 007 Device 001: ID 0000:0000
Bus 006 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 045e:00b9 Microsoft Corp. Wireless Optical Mouse 3.0
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
floo@floolaptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Cantiga Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Cantiga PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0649 (rev a1)
02:00.0 Network controller: Intel Corporation Unknown device 4237
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
06:00.0 FireWire (IEEE 1394): JMicron Technologies, Inc. Unknown device 2380
06:00.1 System peripheral: JMicron Technologies, Inc. Unknown device 2382
06:00.2 SD Host controller: JMicron Technologies, Inc. Unknown device 2381
06:00.3 System peripheral: JMicron Technologies, Inc. Unknown device 2383
06:00.4 System peripheral: JMicron Technologies, Inc. Unknown device 2384
floo@floolaptop:~$ sudo lshw -C network
[sudo] password for floo:
*-network UNCLAIMED
description: Network controller
product: Intel Corporation
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:02:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: latency=0
*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:05:00.0
logical name: eth0
version: 02
serial: 00:1e:ec:81:1c:3e
size: 1GB/s
capacity: 1GB/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.2LK duplex=full ip=192.168.0.2 latency=0 link=yes module=r8169 multicast=yes port=twisted pair speed=1GB/s
floo@floolaptop:~$ lsmod
Module Size Used by
ipv6 267780 12
af_packet 23812 2
rfcomm 41744 2
l2cap 25728 13 rfcomm
bluetooth 61156 4 rfcomm,l2cap
ppdev 10372 0
acpi_cpufreq 10796 1
cpufreq_ondemand 9740 1
cpufreq_stats 7104 0
cpufreq_userspace 5284 0
cpufreq_powersave 2688 0
freq_table 5536 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
cpufreq_conservative 8712 0
sbs 15112 0
container 5632 0
sbshc 7680 1 sbs
dock 11280 0
iptable_filter 3840 0
ip_tables 14820 1 iptable_filter
x_tables 16132 1 ip_tables
aes_i586 33536 0
dm_crypt 15364 0
dm_mod 62660 1 dm_crypt
sbp2 24072 0
parport_pc 36260 0
lp 12324 0
parport 37832 3 ppdev,parport_pc,lp
joydev 13120 0
uvcvideo 58116 0
compat_ioctl32 2304 1 uvcvideo
videodev 29440 1 uvcvideo
snd_hda_intel 344728 8
v4l1_compat 15492 2 uvcvideo,videodev
v4l2_common 18304 2 uvcvideo,videodev
nvidia 7825536 38
sdhci 19076 0
snd_pcm_oss 42144 0
snd_mixer_oss 17920 1 snd_pcm_oss
mmc_core 51460 1 sdhci
i2c_core 24832 1 nvidia
snd_pcm 78596 4 snd_hda_intel,snd_pcm_oss
snd_page_alloc 11400 2 snd_hda_intel,snd_pcm
snd_hwdep 10500 1 snd_hda_intel
snd_seq_dummy 4868 0
psmouse 40336 0
snd_seq_oss 35584 0
video 19856 5
output 4736 1 video
serio_raw 7940 0
snd_seq_midi 9376 0
snd_rawmidi 25760 1 snd_seq_midi
wmi_acer 9644 0
snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi
snd_seq 54224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 24836 4 snd_pcm,snd_seq
snd_seq_device 9612 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
battery 14212 0
ac 6916 0
snd 56996 23 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
pcspkr 4224 0
button 9232 0
evdev 13056 8
soundcore 8800 1 snd
intel_agp_ich9m 23700 0
agpgart 34760 2 nvidia,intel_agp_ich9m
shpchp 34452 0
pci_hotplug 30880 1 shpchp
ext3 136712 1
jbd 48404 1 ext3
mbcache 9600 1 ext3
sg 36880 0
sr_mod 17956 0
cdrom 37408 1 sr_mod
sd_mod 30720 3
usbhid 31872 0
hid 38784 1 usbhid
ahci 28420 2
ohci1394 33584 0
libata 159344 1 ahci
scsi_mod 151436 5 sbp2,sg,sr_mod,sd_mod,libata
ieee1394 93752 2 sbp2,ohci1394
r8169 32900 0
ehci_hcd 37900 0
uhci_hcd 27024 0
usbcore 146028 5 uvcvideo,usbhid,ehci_hcd,uhci_hcd
thermal 16796 0
processor 36872 4 acpi_cpufreq,thermal
fan 5636 0
fbcon 42912 0
tileblit 3456 1 fbcon
font 9472 1 fbcon
bitblit 6784 1 fbcon
softcursor 3072 1 bitblit
fuse 50708 1
floo@floolaptop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
floo@floolaptop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:1e:ec:81:1c:3e
inet adr:192.168.0.2 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: fe80::21e:ecff:fe81:1c3e/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:2842 erreurs:0 :4194783358 overruns:0 frame:0
TX packets:2478 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:3299470 (3.1 MB) Octets transmis:371129 (362.4 KB)
Interruption:216 Adresse de base:0x8000
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:2 erreurs:0 :0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:100 (100.0 B) Octets transmis:100 (100.0 B)
floo@floolaptop:~$ iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
floo@floolaptop:~$ uname -r -m
2.6.24-19-generic i686
floo@floolaptop:~$ cat /etc/network/interfaces
auto lo
iface lo inet loopback
address 127.0.0.1
netmask 255.0.0.0Voilà je viens d'acheter un hp pavilion dv7-1035em et il me pose des problèmes celui-là ! D'une je suis pas un habitué de linux, à dire vrai je n'ai jamais vraiment installé de distrib de façon permanente. J'ai fait plusieurs essais, toujours sur ubuntu/kubuntu pour tester des logs incompatibles win ou simplement pour découvrir de nouvelles maj.
Ceci dit, j'en viens à la source du problème: il intègre une carte wifi N de marque intel wifi link 5100 d'après ce que j'ai pu glané. De plus, j'ai appris que des maj importantes vont apparaître avec la prochaine version d'ubuntu qui devrait sortir en octobre/novembre elle contiendrait des améliorations liées au nouveau kernel 2.6.26 qui comprend des drivers wifi visiblement compatibles avec ma carte.
Donc, n'ayant pas froid aux yeux je me suis lancé dans une compilation d'un 2.6.26.2 (drôle non ?) totalement insensible aux kernel panic et autres menuconfig je m'en suis plutôt bien sorti pour un newbie de level 1... mais le noyau bug au splash avec un bip 
.
J'ai abandonné cette solution, je n'ai pas de notions de debugger et à moins de refaire un config et de trouver d'où vient l'erreur... si quelqu'un se sent le courage de m'aider là-dessus je l'attends 
Il y a 20 minutes je suis tombé sur un topic de hfr parlant de compat-wireless. J'ai trouvé ça intéressant et je suis allé sur http://wireless.kernel.org/. J'ai téléchargé le bz2, commencé le tuto mais je bloque là 
tar jxvf compat-wireless-$(date -I).tar.bz2
cd compat-wireless-$(date -I)
make <--- ??? réponse de ma console :
floo@floolaptop:~/Documents/wireless$ make
make: *** Pas de cibles. Arrêt.Une bête erreur de make vous me direz 
ben oui, rien à rajouter !
Pour aider : http://wireless.kernel.org/en/users/Dow … essdrivers
J'attends une aide charitable avec impatience
Merci
#2 Le 08/08/2008, à 16:34
- slasher_fun
Re : Wifi sur un portable neuf - compat wireless
Tu peux faire un
sudo update-pciidset reposter le résultat de lspci ?
Hors ligne
#3 Le 08/08/2008, à 17:54
- flo360
Re : Wifi sur un portable neuf - compat wireless
Après maj :
floo@floolaptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0649 (rev a1)
02:00.0 Network controller: Intel Corporation Unknown device 4237
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
06:00.0 FireWire (IEEE 1394): JMicron Technologies, Inc. Unknown device 2380
06:00.1 System peripheral: JMicron Technologies, Inc. Unknown device 2382
06:00.2 SD Host controller: JMicron Technologies, Inc. Unknown device 2381
06:00.3 System peripheral: JMicron Technologies, Inc. Unknown device 2383
06:00.4 System peripheral: JMicron Technologies, Inc. Unknown device 2384#4 Le 08/08/2008, à 18:04
- Flo360
Re : Wifi sur un portable neuf - compat wireless
Ah aussi à préciser ma carte son ou du moins le driver déconne, à première vue j'ai pas de son mais quand je lance amarok ou autre soit j'ai un freeze du son (un son qui se répéte sans arrêt) soit il me dit que les codecs (mp3 en l'occurence) ne sont pas installés alors qu'ils le sont.
Bref je pencherai pour un bug du driver (alsa) mais qu'est-ce que je peux faire ?
#5 Le 08/08/2008, à 18:16
- slasher_fun
Re : Wifi sur un portable neuf - compat wireless
Pour le WiFi, si ta console répond
floo@floolaptop:~/Documents/wireless$ makec'est que tu n'es pas dans le bon répertoire, puisque tu es censé être dans compat-wireless-2008-08-08...
Hors ligne
#6 Le 08/08/2008, à 18:20
- kitaboubadabi
Re : Wifi sur un portable neuf - compat wireless
A faire muni d\'une connexion
sudo apt-get update && sudo apt-get install build-essential
wget http://wireless.kernel.org/download/compat-wireless-2.6/compat-wireless-2.6.tar.bz2****************************************************************************************
Compilation et installation
1. Décompression de l\'archive dans votre dossier /home/\'utilisateur\'
cd
tar jxvf compat-wireless-2.6.tar.bz22. Compilation du module et installation
2.1 Compilation
cd compat-wireless-$(date -I)
make
sudo make installPour les desinstaller
sudo make uninstall----------------------------------------------
pour pouvoir utiliser ces driver
(les driver natif du votre noyau ne sont pas remplacer)
Attention si vous avez une clé wifi branché sur un port usb, il est préférable de la retirer sous peine de risquer un gel du pc,
dans ce cas faites Alt+SysReq+b
sudo make loadpour réutiliser les driver natif de votre noyau
sudo make unload#7 Le 08/08/2008, à 18:39
- Flo360
Re : Wifi sur un portable neuf - compat wireless
Okay, le problème du make est réglé. C'était tout bête mais la commande d'extraction a mal fonctionné et ne m'a extrait qu'un répertoire.
Par ordre : make, make install, make load.
Voilà, et maintenant ? J'ai pas l'impression que ça ait changé quelque chose
#8 Le 08/08/2008, à 18:43
- slasher_fun
Re : Wifi sur un portable neuf - compat wireless
Que renvoie un "iwconfig" après un "sudo /etc/init.d/networking restart" ?
Hors ligne
#9 Le 08/08/2008, à 18:50
- Flo360
Re : Wifi sur un portable neuf - compat wireless
root@floolaptop:/home/floo/Documents/compat-wireless-2008-08-06# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
Je m'y attendais
#10 Le 08/08/2008, à 18:57
- slasher_fun
Re : Wifi sur un portable neuf - compat wireless
Et dmesg ?
Hors ligne
#11 Le 08/08/2008, à 19:07
- Flo360
Re : Wifi sur un portable neuf - compat wireless
root@floolaptop:/home/floo/Documents/compat-wireless-2008-08-06# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC 2008 (Ubuntu 2.6.24-19.36-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfda7000 (usable)
[ 0.000000] BIOS-e820: 00000000bfda7000 - 00000000bfdbf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfdbf000 - 00000000bfe83000 (usable)
[ 0.000000] BIOS-e820: 00000000bfe83000 - 00000000bfebf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfebf000 - 00000000bfeea000 (usable)
[ 0.000000] BIOS-e820: 00000000bfeea000 - 00000000bfeff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfeff000 - 00000000bff00000 (usable)
[ 0.000000] BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 2175MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 786176) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 786176
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 786176
[ 0.000000] On node 0 totalpages: 786176
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4350 pages used for memmap
[ 0.000000] HighMem zone: 552450 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FE020 checksum 0
[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 HP )
[ 0.000000] ACPI: XSDT BFEFE120, 0064 (r1 HPQOEM SLIC-MPC 1 1000013)
[ 0.000000] ACPI: FACP BFEFC000, 00F4 (r4 HP VADER 1 MSFT 1000013)
[ 0.000000] ACPI: DSDT BFEEC000, BFDE (r1 HP VADER 1 MSFT 1000013)
[ 0.000000] ACPI: FACS BFE8C000, 0040
[ 0.000000] ACPI: SSDT BFEFD000, 0655 (r1 PmRef CpuPm 3000 INTL 20060912)
[ 0.000000] ACPI: HPET BFEFB000, 0038 (r1 HPQOEM SLIC-MPC 1 MSFT 1000013)
[ 0.000000] ACPI: APIC BFEFA000, 006C (r2 HPQOEM SLIC-MPC 1 MSFT 1000013)
[ 0.000000] ACPI: MCFG BFEF9000, 003C (r1 HPQOEM SLIC-MPC 1 MSFT 1000013)
[ 0.000000] ACPI: ASF! BFEF8000, 00A5 (r32 HPQOEM SLIC-MPC 1 MSFT 1000013)
[ 0.000000] ACPI: SLIC BFEEB000, 0176 (r1 HPQOEM SLIC-MPC 1 LOHR 0)
[ 0.000000] ACPI: BOOT BFEEA000, 0028 (r1 HPQOEM SLIC-MPC 1 MSFT 1000013)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 7:7 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 7:7 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:38000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780034
[ 0.000000] Kernel command line: root=UUID=0cc1fd2d-b778-4134-850c-45e40803650b ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1995.081 MHz processor.
[ 30.674644] Console: colour VGA+ 80x25
[ 30.674664] console [tty0] enabled
[ 30.675054] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 30.675559] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 30.982435] Memory: 3105664k/3144704k available (2177k kernel code, 37328k reserved, 1006k data, 368k init, 2226780k highmem)
[ 30.982442] virtual kernel memory layout:
[ 30.982442] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 30.982461] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 30.982462] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 30.982463] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 30.982464] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 30.982465] .data : 0xc0320474 - 0xc041bdc4 (1006 kB)
[ 30.982465] .text : 0xc0100000 - 0xc0320474 (2177 kB)
[ 30.982468] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 30.982536] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 30.982696] hpet clockevent registered
[ 31.062671] Calibrating delay using timer specific routine.. 3992.86 BogoMIPS (lpj=7985731)
[ 31.062705] Security Framework initialized
[ 31.062729] SELinux: Disabled at boot.
[ 31.062759] AppArmor: AppArmor initialized
[ 31.062762] Failure registering capabilities with primary security module.
[ 31.062769] Mount-cache hash table entries: 512
[ 31.062991] Initializing cgroup subsys ns
[ 31.063013] Initializing cgroup subsys cpuacct
[ 31.063022] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e39d 00000000 00000001 00000000
[ 31.063046] monitor/mwait feature present.
[ 31.063047] using mwait in idle threads.
[ 31.063051] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 31.063052] CPU: L2 cache: 3072K
[ 31.063055] CPU: Physical Processor ID: 0
[ 31.063056] CPU: Processor Core ID: 0
[ 31.063058] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0008e39d 00000000 00000001 00000000
[ 31.063082] Compat vDSO mapped to ffffe000.
[ 31.063111] Checking 'hlt' instruction... OK.
[ 31.079498] SMP alternatives: switching to UP code
[ 31.083006] Early unpacking initramfs... done
[ 31.778842] ACPI: Core revision 20070126
[ 31.779004] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 31.828295] CPU0: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06
[ 31.828309] SMP alternatives: switching to SMP code
[ 31.829010] Booting processor 1/1 eip 3000
[ 31.839361] Initializing CPU#1
[ 31.918172] Calibrating delay using timer specific routine.. 3989.99 BogoMIPS (lpj=7979984)
[ 31.918178] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e39d 00000000 00000001 00000000
[ 31.918182] monitor/mwait feature present.
[ 31.918184] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 31.918186] CPU: L2 cache: 3072K
[ 31.918187] CPU: Physical Processor ID: 0
[ 31.918188] CPU: Processor Core ID: 1
[ 31.918190] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0008e39d 00000000 00000001 00000000
[ 31.918889] CPU1: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06
[ 31.918907] Total of 2 processors activated (7982.85 BogoMIPS).
[ 31.919075] ENABLING IO-APIC IRQs
[ 31.919257] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 32.066189] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 32.086194] Brought up 2 CPUs
[ 32.086215] CPU0 attaching sched-domain:
[ 32.086218] domain 0: span 03
[ 32.086219] groups: 01 02
[ 32.086221] CPU1 attaching sched-domain:
[ 32.086223] domain 0: span 03
[ 32.086224] groups: 02 01
[ 32.086402] net_namespace: 64 bytes
[ 32.086411] Booting paravirtualized kernel on bare hardware
[ 32.086789] Time: 17:48:32 Date: 08/08/08
[ 32.086811] NET: Registered protocol family 16
[ 32.086962] EISA bus registered
[ 32.086966] ACPI: bus type pci registered
[ 32.088590] PCI: Using configuration type 1
[ 32.088603] Setting up standard PCI resources
[ 32.096605] ACPI: EC: Look up EC in DSDT
[ 32.144538] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 32.150392] ACPI: Interpreter enabled
[ 32.150395] ACPI: (supports S0 S3 S4 S5)
[ 32.150413] ACPI: Using IOAPIC for interrupt routing
[ 32.152940] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 32.399488] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 32.399490] ACPI: EC: driver started in interrupt mode
[ 32.399538] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 32.402327] PCI: Transparent bridge - 0000:00:1e.0
[ 32.402391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 32.402778] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 32.402964] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 32.403125] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 32.403281] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 32.403437] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 32.403597] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 32.403772] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
[ 32.410020] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 32.410149] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 32.410276] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 32.410402] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 32.410528] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[ 32.410653] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[ 32.410778] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 32.410904] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 32.414818] ACPI: Power Resource [FN00] (on)
[ 32.414864] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 32.414888] pnp: PnP ACPI init
[ 32.414893] ACPI: bus type pnp registered
[ 32.528076] pnp: PnP ACPI: found 11 devices
[ 32.528078] ACPI: ACPI bus type pnp unregistered
[ 32.528081] PnPBIOS: Disabled by ACPI PNP
[ 32.528251] PCI: Using ACPI for IRQ routing
[ 32.528253] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 32.537846] NET: Registered protocol family 8
[ 32.537848] NET: Registered protocol family 20
[ 32.537875] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 32.537879] hpet0: 4 64-bit timers, 14318180 Hz
[ 32.538908] AppArmor: AppArmor Filesystem Enabled
[ 32.541828] Time: tsc clocksource has been installed.
[ 32.541834] Switched to high resolution mode on CPU 0
[ 32.541930] Switched to high resolution mode on CPU 1
[ 32.553768] system 00:01: ioport range 0x164e-0x164f has been reserved
[ 32.553770] system 00:01: ioport range 0x600-0x60f has been reserved
[ 32.553773] system 00:01: ioport range 0x610-0x610 has been reserved
[ 32.553775] system 00:01: ioport range 0x800-0x80f has been reserved
[ 32.553777] system 00:01: ioport range 0x810-0x817 has been reserved
[ 32.553779] system 00:01: ioport range 0x820-0x823 has been reserved
[ 32.553781] system 00:01: ioport range 0x400-0x47f has been reserved
[ 32.553783] system 00:01: ioport range 0x500-0x53f has been reserved
[ 32.553786] system 00:01: iomem range 0xf8000000-0xfbffffff could not be reserved
[ 32.553789] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 32.553791] system 00:01: iomem range 0xfed10000-0xfed13fff could not be reserved
[ 32.553794] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 32.553796] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 32.553798] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 32.553801] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 32.553803] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 32.584134] PCI: Failed to allocate mem resource #6:80000@d0000000 for 0000:01:00.0
[ 32.584136] PCI: Bridge: 0000:00:01.0
[ 32.584138] IO window: 8000-8fff
[ 32.584141] MEM window: d0000000-d2ffffff
[ 32.584144] PREFETCH window: c0000000-cfffffff
[ 32.584147] PCI: Bridge: 0000:00:1c.0
[ 32.584149] IO window: 7000-7fff
[ 32.584154] MEM window: de200000-df2fffff
[ 32.584158] PREFETCH window: d3000000-d3ffffff
[ 32.584164] PCI: Bridge: 0000:00:1c.1
[ 32.584166] IO window: 6000-6fff
[ 32.584172] MEM window: dd200000-de1fffff
[ 32.584175] PREFETCH window: d4000000-d4ffffff
[ 32.584181] PCI: Bridge: 0000:00:1c.2
[ 32.584183] IO window: 5000-5fff
[ 32.584189] MEM window: dc200000-dd1fffff
[ 32.584193] PREFETCH window: d5000000-d5ffffff
[ 32.584199] PCI: Bridge: 0000:00:1c.3
[ 32.584201] IO window: 3000-4fff
[ 32.584206] MEM window: db200000-dc1fffff
[ 32.584210] PREFETCH window: d6000000-d70fffff
[ 32.584216] PCI: Bridge: 0000:00:1c.4
[ 32.584219] IO window: 2000-2fff
[ 32.584224] MEM window: da100000-db1fffff
[ 32.584228] PREFETCH window: d7100000-d80fffff
[ 32.584233] PCI: Bridge: 0000:00:1c.5
[ 32.584236] IO window: 1000-1fff
[ 32.584241] MEM window: d9100000-da0fffff
[ 32.584245] PREFETCH window: d8100000-d90fffff
[ 32.584251] PCI: Bridge: 0000:00:1e.0
[ 32.584252] IO window: disabled.
[ 32.584257] MEM window: disabled.
[ 32.584260] PREFETCH window: disabled.
[ 32.584275] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 32.584280] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 32.584301] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 32.584306] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 32.584328] PCI: Enabling device 0000:00:1c.1 (0000 -> 0003)
[ 32.584332] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 17
[ 32.584338] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 32.584360] PCI: Enabling device 0000:00:1c.2 (0000 -> 0003)
[ 32.584364] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 32.584370] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 32.584393] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 32.584398] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 32.584419] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[ 32.584425] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 32.584446] PCI: Enabling device 0000:00:1c.5 (0000 -> 0003)
[ 32.584449] ACPI: PCI Interrupt 0000:00:1c.5[b] -> GSI 17 (level, low) -> IRQ 17
[ 32.584456] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 32.584469] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 32.584478] NET: Registered protocol family 2
[ 32.621750] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 32.621919] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 32.622321] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 32.622519] TCP: Hash tables configured (established 131072 bind 65536)
[ 32.622521] TCP reno registered
[ 32.633797] checking if image is initramfs... it is
[ 33.236363] Freeing initrd memory: 7730k freed
[ 33.236490] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 33.236492] Simple Boot Flag at 0x44 set to 0x1
[ 33.236996] audit: initializing netlink socket (disabled)
[ 33.237008] audit(1218217713.092:1): initialized
[ 33.237207] highmem bounce pool size: 64 pages
[ 33.238773] VFS: Disk quotas dquot_6.5.1
[ 33.238829] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 33.238935] io scheduler noop registered
[ 33.238937] io scheduler anticipatory registered
[ 33.238939] io scheduler deadline registered
[ 33.238948] io scheduler cfq registered (default)
[ 33.239324] Boot video device is 0000:01:00.0
[ 33.239415] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 33.239445] assign_interrupt_mode Found MSI capability
[ 33.239469] Allocate Port Service[0000:00:01.0:pcie00]
[ 33.239496] Allocate Port Service[0000:00:01.0:pcie02]
[ 33.239561] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 33.239615] assign_interrupt_mode Found MSI capability
[ 33.239658] Allocate Port Service[0000:00:1c.0:pcie00]
[ 33.239683] Allocate Port Service[0000:00:1c.0:pcie02]
[ 33.239772] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 33.239826] assign_interrupt_mode Found MSI capability
[ 33.239869] Allocate Port Service[0000:00:1c.1:pcie00]
[ 33.239893] Allocate Port Service[0000:00:1c.1:pcie02]
[ 33.239984] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 33.240039] assign_interrupt_mode Found MSI capability
[ 33.240082] Allocate Port Service[0000:00:1c.2:pcie00]
[ 33.240107] Allocate Port Service[0000:00:1c.2:pcie02]
[ 33.240197] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 33.240251] assign_interrupt_mode Found MSI capability
[ 33.240294] Allocate Port Service[0000:00:1c.3:pcie00]
[ 33.240320] Allocate Port Service[0000:00:1c.3:pcie02]
[ 33.240411] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 33.240466] assign_interrupt_mode Found MSI capability
[ 33.240509] Allocate Port Service[0000:00:1c.4:pcie00]
[ 33.240536] Allocate Port Service[0000:00:1c.4:pcie02]
[ 33.240626] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 33.240680] assign_interrupt_mode Found MSI capability
[ 33.240722] Allocate Port Service[0000:00:1c.5:pcie00]
[ 33.240747] Allocate Port Service[0000:00:1c.5:pcie02]
[ 33.240962] isapnp: Scanning for PnP cards...
[ 33.596618] isapnp: No Plug & Play device found
[ 33.616742] Real Time Clock Driver v1.12ac
[ 33.616941] hpet_resources: 0xfed00000 is busy
[ 33.616981] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 33.617974] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 33.618026] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 33.618105] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 33.670821] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 33.670825] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 33.690175] mice: PS/2 mouse device common for all mice
[ 33.690266] EISA: Probing bus 0 at eisa.0
[ 33.690271] Cannot allocate resource for EISA slot 1
[ 33.690273] Cannot allocate resource for EISA slot 2
[ 33.690275] Cannot allocate resource for EISA slot 3
[ 33.690276] Cannot allocate resource for EISA slot 4
[ 33.690278] Cannot allocate resource for EISA slot 5
[ 33.690279] Cannot allocate resource for EISA slot 6
[ 33.690281] Cannot allocate resource for EISA slot 7
[ 33.690283] Cannot allocate resource for EISA slot 8
[ 33.690284] EISA: Detected 0 cards.
[ 33.690286] cpuidle: using governor ladder
[ 33.690288] cpuidle: using governor menu
[ 33.690352] NET: Registered protocol family 1
[ 33.690374] Using IPI No-Shortcut mode
[ 33.690395] registered taskstats version 1
[ 33.690502] Magic number: 4:204:845
[ 33.690527] hash matches device ptyre
[ 33.690545] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 33.690547] EDD information not available.
[ 33.690684] Freeing unused kernel memory: 368k freed
[ 33.726164] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 34.875281] fuse init (API version 7.9)
[ 34.909991] ACPI: Fan [FAN] (on)
[ 34.914759] ACPI: SSDT BFDB3C98, 0223 (r1 PmRef Cpu0Ist 3000 INTL 20060912)
[ 34.915016] ACPI: SSDT BFDB1598, 0535 (r1 PmRef Cpu0Cst 3001 INTL 20060912)
[ 34.915397] Monitor-Mwait will be used to enter C-1 state
[ 34.915399] Monitor-Mwait will be used to enter C-2 state
[ 34.915401] Monitor-Mwait will be used to enter C-3 state
[ 34.915502] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 34.915506] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 34.915832] ACPI: SSDT BFDB2E18, 01CF (r1 PmRef ApIst 3000 INTL 20060912)
[ 34.916131] ACPI: SSDT BFDB3F18, 008D (r1 PmRef ApCst 3000 INTL 20060912)
[ 34.916713] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 34.916717] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 34.916728] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 34.916737] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 34.936496] ACPI: Thermal Zone [THRM] (36 C)
[ 35.395413] usbcore: registered new interface driver usbfs
[ 35.395433] usbcore: registered new interface driver hub
[ 35.412633] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 35.412663] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 35.412685] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 35.412946] eth0: RTL8168c/8111c at 0xf8854000, 00:1e:ec:81:1c:3e, XID 3c4000c0 IRQ 216
[ 35.452164] usbcore: registered new device driver usb
[ 35.480993] USB Universal Host Controller Interface driver v3.0
[ 35.481040] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 35.481051] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 35.481054] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 35.481323] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 35.481355] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000090e0
[ 35.481469] usb usb1: configuration #1 chosen from 1 choice
[ 35.481490] hub 1-0:1.0: USB hub found
[ 35.481495] hub 1-0:1.0: 2 ports detected
[ 35.537159] SCSI subsystem initialized
[ 35.576058] libata version 3.00 loaded.
[ 35.584147] ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 17 (level, low) -> IRQ 17
[ 35.584157] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 35.584161] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 35.584181] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 35.584212] uhci_hcd 0000:00:1a.1: irq 17, io base 0x000090c0
[ 35.584315] usb usb2: configuration #1 chosen from 1 choice
[ 35.584336] hub 2-0:1.0: USB hub found
[ 35.584341] hub 2-0:1.0: 2 ports detected
[ 35.816859] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 35.816872] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 35.816876] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 35.816897] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 35.816927] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000090a0
[ 35.817028] usb usb3: configuration #1 chosen from 1 choice
[ 35.817048] hub 3-0:1.0: USB hub found
[ 35.817052] hub 3-0:1.0: 2 ports detected
[ 35.919954] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 22 (level, low) -> IRQ 21
[ 35.919964] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 35.919968] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 35.919987] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 35.920016] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00009080
[ 35.920112] usb usb4: configuration #1 chosen from 1 choice
[ 35.920131] hub 4-0:1.0: USB hub found
[ 35.920135] hub 4-0:1.0: 2 ports detected
[ 36.023905] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 36.023915] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 36.023919] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 36.023945] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 36.023975] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009060
[ 36.024059] usb usb5: configuration #1 chosen from 1 choice
[ 36.024079] hub 5-0:1.0: USB hub found
[ 36.024082] hub 5-0:1.0: 2 ports detected
[ 36.128183] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 36.128190] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 36.128194] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 36.128211] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 6
[ 36.128239] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00009040
[ 36.128327] usb usb6: configuration #1 chosen from 1 choice
[ 36.128345] hub 6-0:1.0: USB hub found
[ 36.128348] hub 6-0:1.0: 2 ports detected
[ 36.139757] Clocksource tsc unstable (delta = -3578608269 ns)
[ 36.143752] Time: hpet clocksource has been installed.
[ 36.148708] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 36.215737] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 36.215748] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 36.215751] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 36.215775] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 36.219675] ehci_hcd 0000:00:1a.7: debug port 1
[ 36.219681] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 36.219686] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xdf304c00
[ 36.271516] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 36.271614] usb usb7: configuration #1 chosen from 1 choice
[ 36.271635] hub 7-0:1.0: USB hub found
[ 36.271640] hub 7-0:1.0: 4 ports detected
[ 36.291232] usb 3-1: configuration #1 chosen from 1 choice
[ 36.304897] usbcore: registered new interface driver hiddev
[ 36.317499] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[ 36.317511] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 36.317515] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 36.317540] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 36.321459] ehci_hcd 0000:00:1d.7: debug port 1
[ 36.321465] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 36.321470] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdf304800
[ 36.323840] input: Microsoft Microsoft USB Wireless Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input2
[ 36.329849] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 36.329927] usb usb8: configuration #1 chosen from 1 choice
[ 36.329946] hub 8-0:1.0: USB hub found
[ 36.329950] hub 8-0:1.0: 8 ports detected
[ 36.331411] input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft USB Wireless Mouse] on usb-0000:00:1d.0-1
[ 36.331422] usbcore: registered new interface driver usbhid
[ 36.331425] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 36.363192] usb 3-1: USB disconnect, address 2
[ 36.367972] ahci 0000:00:1f.2: version 3.0
[ 36.368000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 21 (level, low) -> IRQ 22
[ 36.474335] usb 8-5: new high speed USB device using ehci_hcd and address 3
[ 36.633862] usb 8-5: configuration #1 chosen from 1 choice
[ 36.787653] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 36.787657] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 36.787662] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 36.787908] scsi0 : ahci
[ 36.788058] scsi1 : ahci
[ 36.788195] scsi2 : ahci
[ 36.788332] scsi3 : ahci
[ 36.788472] scsi4 : ahci
[ 36.788615] scsi5 : ahci
[ 36.788691] ata1: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304100 irq 215
[ 36.788694] ata2: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304180 irq 215
[ 36.788696] ata3: DUMMY
[ 36.788697] ata4: DUMMY
[ 36.788699] ata5: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304300 irq 215
[ 36.788702] ata6: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304380 irq 215
[ 36.799076] usb 3-1: new low speed USB device using uhci_hcd and address 3
[ 36.831558] usb 3-1: configuration #1 chosen from 1 choice
[ 36.856600] input: Microsoft Microsoft USB Wireless Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input3
[ 36.867010] input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft USB Wireless Mouse] on usb-0000:00:1d.0-1
[ 37.072243] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 37.072409] ata1.00: ATA-8: WDC WD2500BEVS-60UST0, 01.01A01, max UDMA/100
[ 37.072412] ata1.00: 488397168 sectors, multi 0: LBA48
[ 37.072955] ata1.00: configured for UDMA/100
[ 37.117671] ata2: SATA link down (SStatus 0 SControl 300)
[ 37.354224] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 37.375253] ata5.00: ATAPI: TSSTcorp CDDVDW TS-L633L, 0400, max UDMA/100
[ 37.405174] ata5.00: configured for UDMA/100
[ 37.455688] ata6: SATA link down (SStatus 0 SControl 300)
[ 37.455901] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVS-6 01.0 PQ: 0 ANSI: 5
[ 37.457026] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633L 0400 PQ: 0 ANSI: 5
[ 37.457958] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 37.457968] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 37.509651] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[da100000-da1007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 37.516387] Driver 'sr' needs updating - please use bus_type methods
[ 37.526284] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 37.526287] Uniform CD-ROM driver Revision: 3.20
[ 37.526324] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 37.530009] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 37.530028] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 37.539670] Driver 'sd' needs updating - please use bus_type methods
[ 37.539723] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 37.539733] sd 0:0:0:0: [sda] Write Protect is off
[ 37.539735] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 37.539748] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 37.539785] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 37.539793] sd 0:0:0:0: [sda] Write Protect is off
[ 37.539795] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 37.539808] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 37.539811] sda: sda1 sda2 sda3 < sda5 > sda4
[ 37.601013] sd 0:0:0:0: [sda] Attached SCSI disk
[ 37.738013] Attempting manual resume
[ 37.738015] swsusp: Resume From Partition 8:5
[ 37.738017] PM: Checking swsusp image.
[ 37.738136] PM: Resume from disk failed.
[ 37.752314] kjournald starting. Commit interval 5 seconds
[ 37.752340] EXT3-fs: mounted filesystem with ordered data mode.
[ 37.876384] ieee1394: Host added: ID:BUS[0-00:1023] GUID[873f0200a31b40d9]
[ 41.183046] Linux agpgart interface v0.102
[ 41.254604] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 41.286610] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 41.402601] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 41.545994] input: Power Button (FF) as /devices/virtual/input/input5
[ 41.594409] ACPI: Power Button (FF) [PWRF]
[ 41.594470] input: Power Button (CM) as /devices/virtual/input/input6
[ 41.650346] ACPI: Power Button (CM) [PWRB]
[ 41.650399] input: Lid Switch as /devices/virtual/input/input7
[ 41.682421] ACPI: Lid Switch [LID0]
[ 41.682469] input: Sleep Button (CM) as /devices/virtual/input/input8
[ 41.730313] ACPI: Sleep Button (CM) [SLPB]
[ 41.862313] ACPI: AC Adapter [AC] (on-line)
[ 41.978199] ACPI: Battery Slot [BAT0] (battery absent)
[ 41.978286] ACPI: WMI-Acer: Mapper loaded
[ 42.199146] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 42.250006] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 42.262121] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input10
[ 42.316944] ACPI: Video Device [EVGA] (multi-head: yes rom: no post: no)
[ 42.692829] ACPI: PCI Interrupt 0000:00:1b.0[b] -> GSI 22 (level, low) -> IRQ 21
[ 42.692852] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 42.813408] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04751/0xa00000
[ 42.895975] sdhci: Secure Digital Host Controller Interface driver
[ 42.895978] sdhci: Copyright(c) Pierre Ossman
[ 42.942513] nvidia: module license 'NVIDIA' taints kernel.
[ 42.945129] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 43.344356] Linux video capture interface: v2.00
[ 43.396371] uvcvideo: Found UVC 1.00 device HP Webcam (046d:09b8)
[ 43.401441] usbcore: registered new interface driver uvcvideo
[ 43.401444] USB Video Class driver (v0.1.0)
[ 43.725059] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:593: hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
[ 43.808521] sdhci: SDHCI controller found at 0000:06:00.2 [197b:2381] (rev 0)
[ 43.808553] ACPI: PCI Interrupt 0000:06:00.2[A] -> GSI 16 (level, low) -> IRQ 16
[ 43.808579] PCI: Setting latency timer of device 0000:06:00.2 to 64
[ 43.808616] mmc0: SDHCI at 0xda100a00 irq 16 DMA
[ 43.808683] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 43.808702] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 43.808798] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
[ 44.103353] lp: driver loaded but no devices found
[ 44.232373] Adding 971892k swap on /dev/sda5. Priority:-1 extents:1 across:971892k
[ 45.002567] EXT3 FS on sda4, internal journal
[ 45.163349] device-mapper: uevent: version 1.0.3
[ 45.163372] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 46.574205] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 46.956469] No dock devices found.
[ 49.382959] apm: BIOS not found.
[ 49.646179] ppdev: user-space parallel port driver
[ 49.959942] audit(1218210541.959:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5561 profile="/usr/sbin/cupsd" namespace="default"
[ 54.911291] r8169: eth0: link up
[ 54.911306] r8169: eth0: link up
[ 55.019211] Bluetooth: Core ver 2.11
[ 55.019575] NET: Registered protocol family 31
[ 55.019581] Bluetooth: HCI device and connection manager initialized
[ 55.019587] Bluetooth: HCI socket layer initialized
[ 55.063351] Bluetooth: L2CAP ver 2.9
[ 55.063359] Bluetooth: L2CAP socket layer initialized
[ 55.152390] Bluetooth: RFCOMM socket layer initialized
[ 55.152412] Bluetooth: RFCOMM TTY layer initialized
[ 55.152415] Bluetooth: RFCOMM ver 1.8
[ 58.242649] NET: Registered protocol family 17
[ 63.445605] NET: Registered protocol family 10
[ 63.446256] lo: Disabled Privacy Extensions
[ 73.505314] eth0: no IPv6 routers present
[ 2640.426097] ieee80211_crypt: registered algorithm 'NULL'
[ 2640.428973] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 2640.428977] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 2640.431245] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[ 2640.431249] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[ 2640.452878] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 2640.452883] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 2640.498696] usbcore: registered new interface driver usb8xxx
[ 2640.545673] usbcore: registered new interface driver prism54usb
[ 2640.583842] usbcore: registered new interface driver zd1211rw
[ 2640.621662] usbcore: registered new interface driver rtl8187
[ 2640.676617] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26k
[ 2640.676622] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[ 2640.706913] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.3.27k
[ 2640.706918] iwl4965: Copyright(c) 2003-2008 Intel Corporation
[ 2640.878057] usbcore: registered new interface driver rt2500usb
[ 2640.897433] usbcore: registered new interface driver rt73usb
[ 2640.918662] usbcore: registered new interface driver cdc_ether
[ 2640.920272] usbcore: registered new interface driver rndis_host
[ 2640.921974] usbcore: registered new interface driver rndis_wlan
[ 2640.941224] Atmel at76x USB Wireless LAN Driver 0.17 loading
[ 2640.941254] usbcore: registered new interface driver at76_usb
[ 2642.926035] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
[ 2642.946683] Broadcom 43xx-legacy driver loaded [ Features: PID, Firmware-ID: FW10 ]#12 Le 08/08/2008, à 19:10
- slasher_fun
Re : Wifi sur un portable neuf - compat wireless
Mwé, va falloir attendre Intrepid je pense... Tu peux essayer la version alpha 3 ?
Hors ligne
#13 Le 08/08/2008, à 19:15
- Flo360
Re : Wifi sur un portable neuf - compat wireless
Je ne trouve pas de version alpha de compat ?
#14 Le 08/08/2008, à 19:25
- slasher_fun
Re : Wifi sur un portable neuf - compat wireless
d'Intrepid Ibex
Hors ligne
#15 Le 08/08/2008, à 19:34
- Flo360
Re : Wifi sur un portable neuf - compat wireless
Ah okay tu veux que j'installe l'alpha d'intrepid
Ben pourquoi pas, j'essayerai ça tout à l'heure.
Et pour le son, une idée non ?
En tout cas merci quand même, quoi qu'on en dise linux c'est pas de la tarte xD
#16 Le 08/08/2008, à 19:40
- slasher_fun
Re : Wifi sur un portable neuf - compat wireless
Bah oui, mais matos récent
Le son, bah même cause même tentative de solution
Encore mieux que l'alpha 3 : la daily. Comme ça c'est encore plus à jour : http://cdimage.ubuntu.com/daily-live/current/intrepid-desktop-i386.iso
Hors ligne
#17 Le 08/08/2008, à 19:48
- Flo360
Re : Wifi sur un portable neuf - compat wireless
Okay, je télécharge ça tout de suite.
#18 Le 09/08/2008, à 09:29
- t6sdt7
Re : Wifi sur un portable neuf - compat wireless
Bonjour,
Je viens d'essayer Intrepid (version "daily") et malheureusement toujours pas de wifi sur mon Vaio équipé d'un chipset Intel Wifi Link 5100 (comme Flo360). Pourtant le noyau 2.6.26 était censé résoudre le problème (?) enfin mieux vaut attendre la version finale évidemment.
#19 Le 09/08/2008, à 12:27
- slasher_fun
Re : Wifi sur un portable neuf - compat wireless
Yep, va falloir attendre un peu j'ai bien peur... Ou essayer "crade" avec ndiswrapper en attendant.
Hors ligne
#20 Le 09/08/2008, à 15:09
- t6sdt7
Re : Wifi sur un portable neuf - compat wireless
slasher-fun a écrit :
Yep, va falloir attendre un peu j'ai bien peur... Ou essayer "crade" avec ndiswrapper en attendant.
Marche pas non plus avec ndiswrapper ... c'est la première chose que j'ai essayé.
#21 Le 10/08/2008, à 01:55
- Flo360
Re : Wifi sur un portable neuf - compat wireless
Eh bien tu me rassures là t6sdt7 !
Perso j'ai pas eu le temps de tester, ce fameux noyau n'a pas voulu m'écouter et booter comme il faut .
Et la cerise : une réinstal complète parce que le grub était éronné naturellement (pourtant je me suis renseigné là dessus avant de le faire mais pas assez... J'ai voulu utiliser gparted et formater avec en pensant qu'il détecterait automatiquement un multiboot existant et qu'il arrangerait les choses mais il n'a pas semblé vouloir...).
Enfin, il ne reste plus qu'à attendre la fin de l'année pour la finale et t6sdt7 tiens moi au courant (par mail) si tu trouves quelque chose
Merci aussi à slasher-fun pour son aide
#22 Le 10/08/2008, à 02:02
- @(`↓´)@
Re : Wifi sur un portable neuf - compat wireless
avez vous essayé les drivers de XP et non vista??
#23 Le 10/08/2008, à 13:15
- t6sdt7
Re : Wifi sur un portable neuf - compat wireless
@(`↓´)@ a écrit :
avez vous essayé les drivers de XP et non vista??
Oui, sans grand succès non plus. Visiblement ce chipset est parfaitement non fonctionnel sous ubuntu pour l'instant :
http://ubuntuforums.org/showthread.php?t=879134
http://forum.ubuntu-fr.org/viewtopic.php?id=236551
#24 Le 10/09/2008, à 09:26
- Kalash
Re : Wifi sur un portable neuf - compat wireless
Pour ton son, j'ai eu les mêmes soucis et maintenant ça marche niquel!
cherche : /boot/grub/menu.lst et à la fin de la ligne kernel tu rajoutes pci=noacpi
Au cas où tu veuilles que le son switch quand tu branches quelque chose sur ta prise jack de sortir son (genre un casque ou des enceintes) il faut que tu créer un fichier : ~/.asoundrc
avec comme contenu :
pcm.intel8x0 {
type hw
card 0
}
ctl.intel8x0 {
type hw
card 0
}En passant par là, j'ai le même soucis pour ce qui est du wifi, sans avoir trouvé de pistes de solution, alors si quelqu'un a du nouveau je suis plus que preneur en tant que possesseur d'un dv7 1070!
Bonne continuation!
Hors ligne
#25 Le 10/09/2008, à 12:14
- Kalash
Re : Wifi sur un portable neuf - compat wireless
Pour ce qui est du wifi, j'ai trouvé la solution sur le fofo anglais!
http://ubuntuforums.org/showpost.php?p=5754065&postcount=62
Hors ligne
Pages : 1