Ubuntu-fr

eln

Problème winmodem : hsf-hfc-smartlink ?

Bonjour.
Je suis passé à ubuntu récemment sur un dell inspiron 8500 et pour l'instant tout fonctionne bien sauf mon modem interne, celui-ci n'étant pas reconnu.

Après plusieurs lectures et essais infructueux j'aurai besoin d'aide avant d'être obligé d'investir dans un vrai modèle.

j'ai essayé la "methode smartlink", la "méthode hsfmodem" sans aucun résultat.

Ci-dessous le fichier ModemData.txt suite à un scanModem.

DO use the following line as the email Subject Line, to alert cogent experts:
      scanModem, Ubuntu 5.10 "Breezy Badger"  kernel 2.6.12-9-686
Occassionally reponses are blocked by an Internet Provider mail filters.
So do in a day also check the Archived responses at DISCUSS@linmodems.org
Code updated on:  2006_Feb_14
------------ --------------  System information ------------------------
Ubuntu 5.10 "Breezy Badger"
on System with processor: i686
currently under kernel:   2.6.12-9-686
USB modem not detected.

The kernel was assembled with compiler:  3.4.5
with current System compiler GCC=4.0.2

Found make utility.

Checking for kernel-headers needed for compiling.
Kernel-headers supporting compiling are resident:

Modem candidates are at PCI_buses:  0000:00:1f.6
   
Providing detail for device at  0000:00:1f.6
  with vendor-ID:device-ID
        ----:----
Class 0703: 8086:24c6   Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
  SubSystem 134d:4c21  PCTel Inc: Unknown device 4c21
    Flags: medium devsel, IRQ 5
Checking for IRQ 5 sharing with modem.
      XT-PIC  Intel 82801DB-ICH4
      XT-PIC  ide1

 
                  -----PCI_IDs-------                    --CompilerVer-
    Feature List:  Primary  Subsystem Distr  KernelVer   kernel default  CPU
./scanModem test 8086:24c6 134d:4c21 ubuntu 2.6.12-9-686  3.4.5 4.0.2    i686
     
Information on several modem chipset providers is provided below,
because ambiguities remain on the correct choice of supporting software.
           
== Checking PCI IDs through modem chip suppliers ==

Vendor=8086 is Intel, Inc. producing HaM and 536ep host controller free (HCF) modems, 537 soft modem
http://developer.intel.com/design/modems/ .  Also produced are
AC97 and MC97 controllers managing a varierty of non-Intel soft modem Subsystems.
These subSystems often have PCI_IDs assigned by the modem assembler, rather than the chip provider.
Download Intel-537ep drivers through:  http://developer.intel.com/design/modems/support/drivers.htm 
Also check at: http://linmodems.technion.ac.il/packages/Intel/537/ 
for beta releases and perhaps Already compiled drivers for some Linux distributions
A very detailed installation report cogent to 537 type modems is at:
                  http://linmodems.technion.ac.il/archive-fifth/msg00541.html

Setup call id with:
    Type 1 : When the phone line is not in use                    at+vcid=1
    Type 2 : When the phone line is already in use on a call      at+pcw=0
---------------------

  ======= PCI_ID checking completed ======
Update=2006_Feb_14

Analyzing information for PCMCIA device at PCI Bus 02:01.0
0000:02:01.0 CardBus bridge: Texas Instruments PCI4510 PC card Cardbus Controller (rev 02)
    Subsystem: Dell: Unknown device 013e
    Flags: bus master, medium devsel, latency 168, IRQ 11
GREPping for an inserted PCMCIA modem with filter:        ommunication
If a PCMCIA modem is currently inserted and the sockets activated by
    /etc/init.d/pcmcia start
then the PCMCIA bridge is NOT transparent.

If the modem is known to have a Lucent digital signal processing chipset,
then PCMCIA.tar.gz variant assembled by Joern Wustenfeld is necessary,
rather than the standard ltmodem-8.31a10.tar.gz at  http://ltmodem.heby.de/
drwxr-xr-x  2 root root 0 2006-02-18 22:12 /dev/.udevdb

There is an active UDEV file system, creating device nodes in volatile RAM.
For SmartLink modems using the slamr.ko or slusb.ko drivers an /etc/init.d/ script
will be necessary to create /dev/slamr0 or /dev/slusb0 ports, or manually by:
#  mknod -m 600 /dev/slamr0 c 242 0
#  mknod -m 600 /dev/slusb0 c 243 0
upon each bootup.

For information on modem port creation under the UDEV device file system see:
   http://linmodems.technion.ac.il/archive-fourth/msg03299.html  for Conexnant modems
   http://linmodems.technion.ac.il/archive-fifth/msg01177.html  for Lucent/Agere DSP modems
   
Checking for modem symbolic link support lines within /etc/udev/ files

Checking the /etc/apt/sources.list
deb cdrom:[Ubuntu 5.10 _Breezy Badger_ - Release i386 (20051012)]/ breezy main restricted

## Uncomment the following two lines to fetch updated software from the network
# deb http://fr.archive.ubuntu.com/ubuntu breezy main restricted
# deb-src http://fr.archive.ubuntu.com/ubuntu breezy main restricted

## Uncomment the following two lines to fetch major bug fix updates produced
## after the final release of the distribution.
# deb http://fr.archive.ubuntu.com/ubuntu breezy-updates main restricted
# deb-src http://fr.archive.ubuntu.com/ubuntu breezy-updates main restricted

## Uncomment the following two lines to add software from the 'universe'
## repository.
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## universe WILL NOT receive any review or updates from the Ubuntu security
## team.
# deb http://fr.archive.ubuntu.com/ubuntu breezy universe
# deb-src http://fr.archive.ubuntu.com/ubuntu breezy universe

## Uncomment the following two lines to add software from the 'backports'
## repository.
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
# deb http://fr.archive.ubuntu.com/ubuntu breezy-backports main restricted universe multiverse
# deb-src http://fr.archive.ubuntu.com/ubuntu breezy-backports main restricted universe multiverse

# deb http://security.ubuntu.com/ubuntu breezy-security main restricted
# deb-src http://security.ubuntu.com/ubuntu breezy-security main restricted

# deb http://security.ubuntu.com/ubuntu breezy-security universe
# deb-src http://security.ubuntu.com/ubuntu breezy-security universe

A package kernel-kbuild-2.6-3 or later version must be installed to support compiling

    /usr/bin/gcc -> gcc-4.0
     
The Major.Minor versions differ in the designated compiler 4.0.2 and the 3.4.5 used in kernel assembly!!"
But there must be a match on the target for driver installation,
of gcc Major.Minor versions or kernel and drivers!!
Otherwise the drivers will fail to load with warning:
  Invalid module format!!"
See http://linmodems.technion.ac.il/archive-fifth/msg04252.html

Modem symbolic link is:  /dev/modem -> ttySHSF0

The following information blocks just query some ppp support items.

====================================================
   grep -rs ppp /etc/modprobe.*
-------------------------------------
/etc/modprobe.d/aliases:alias net-pf-24 pppoe
/etc/modprobe.d/aliases:alias ppp-compress-18 ppp_mppe_mppc
-------------------------------------
Resident PPP support modules are properly uncompressed .
COMM services are not active
Be sure to read the section about ppp related modules and aliases in Modem/YourModem.txt

  The current modem symbolic link is: /dev/modem -> ttySHSF0
  The ports /dev/ttyS0 or 1,2,3 are for standard Controller chip modems

No devfsd.conf file found, indicated absense of the devfsd daemon package
for device file system (devfs) symbolic link support.

DEVFSD=
---- dmesg queries -------
[4294668.405000] audit: initializing netlink socket (disabled)
[4294668.784000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[4294702.342000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
[4294702.342000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
[4294702.657000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
[4294702.657000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
[4294707.426000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[4294714.588000] ibm_acpi: ec object not found
[4294727.553000] apm: BIOS not found.
  ubuntu is not yet providing pre-compiled drivers for WinModems

D'avance merci pour la marche à suivre

eln

Re : Problème winmodem : hsf-hfc-smartlink ?

Bonjour à tous
Je vois que mon post n'a pas beaucoup évolué

j'ai de bonnes nouvelles, j'ai réussi à trouver un pilote correspondant à mon modem et cela marche, me permettant de me connecter sur internet par ubuntu, mais j'ai encore quelques problèmes et si quelqu'un pouvait m'aider

1°étape

j'ai récupérer le fichier slmodem-breezy.tar.gz
dézipper
lu le slmodem-breezy.txt
       
Marvin Stodolsky    
to Eduard, Badar, Linmodems, Jacques.Goldbe.
     More options      2:27 am (16 minutes ago)
Eduard.

  See the Attached sl_daemon.diff . Though soon there will be another
update exposing unsupported Conexant modems.  Just a courtesy now, as
I'm sending the current state to Badar.  On his System slamr doesn't
load without a prelimnary
# modprobe ungrab-winmodem
This driver should be included in your sl-modem-modules package. Get
Sasha's tarball for it at
http://phep2.technion.ac.il/linmodems/packages/smartlink/

Badar,

RE:  Have to do all the steps again to make the dial-up work.

While online do
$ sudo apt-get update

Then you will be able to:
$ sudo apt-get install gcc-3.4
which you will need to compile your own drivers after kernel updates

For the modem automation get Eduard's package:
$ apt-cache search sl-modem
$ apt-cache show sl-modem-daemon
for info
$ sudo apt-get install sl-modem-daemon

The necessary files will also be in a
slmodem-breezy.tar.gz  package that will follow. They are among:
-----------
debconf_1.4.56ubuntu2_all.deb          slmodem-alsa
sl-modem-daemon_2.9.11-20050816_i386.deb
sl-modem-daemon  unloading
----------
Install the *.deb if necessary with
$ sudo dpkg -i *.deb

$ sudo mkdir /lib/modules/2.6.12-9-386/extra
$ sudo cp slamr.ko ungrab-winmodem.ko  /lib/modules/2.6.12-9-386/extra/
$ sudo depmod -a
Now the System will know how to find the drivers.

The sl-modem-daemon.deb  places a slmodemd that is older than the one
I sent earliern  So:
$ sudo rm /usr/sbin/slmodemd
and copy in the newer one
$ sudo cp slmodemd  /usr/sbin/slmodemd

The sl-modem-daemon.deb also install places a script
/etc/init.d/sl-modem-daemon  , which is WITHOUT ungrab-winmodem
support.  Copy my updated  sl-modem-daemon
$ sudo rm  /etc/init.d/sl-modem-daemon
$ sudo cp sl-modem-daemon    /etc/init.d/sl-modem-daemon
over it.

Run
$ sudo /etc/init.d/sl-modem-daemon start
(which should report)
ungrab-winmodem driver loaded, to gaurantee modem access by slamr
slamr driver loaded
Starting SmartLink slmodemd support for: slamr0.
Creating /dev/modem symlink, pointing to: /dev/ttySL0.
lrwxrwxrwx  /dev/modem --> /dev/ttySL0
lrwxrwxrwx  1 root root 10 2006-01-15 01:29 /dev/ttySL0 -> /dev/pts/0
-----
This will run automatically on each bootup in the future.
So you will only have to start the dialout.

2°étape

$ sudo dpkg -i *.deb (à ce stade mon modem est reconnu)

$ sudo mkdir /lib/modules/2.6.12-9-686/extra (j'ai remplacé 386 par 686)

$ sudo cp slamr.ko ungrab-winmodem.ko  /lib/modules/2.6.12-9-386/extra/
et la cela se complique :

cp: ne peut évaluer `slamr.ko': Aucun fichier ou répertoire de ce type
cp: ne peut évaluer `ungrab-winmodem.ko': Aucun fichier ou répertoire de ce type

Quelqu'un peut-il m'aider?