Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 21/09/2015, à 06:45

siorac

Impossible de lancer ubuntu : busybox

Bonjour,

Suite à un problème de disque dur, je suis en live usb depuis deux mois. Tout allait pour le mieux jusqu'à ce matin, impossible de démarrer ubuntu.

Voici ce qui s'affiche sur mon écran :

 ACPI PCC probe failed

Ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
Ata1: irq_stat 0x00000048, connection status changed 
Ata1 SError :{ CommWake DevExch }  

Mes compétences techniques sont proches de zéro, je ne comprends pas quel est le problème...

Toute aide est la bienvenue, merci!

Hors ligne

#2 Le 21/09/2015, à 07:43

malbo

Re : Impossible de lancer ubuntu : busybox

Prends une autre clé USB et refais-toi une LiveUSB toute neuve avec cette autre clé USB. Quand ce sera fait, ta vieille LiveUSB restant connectée, démarre ton ordi en session live sur cette nouvelle LiveUSB (choix Essayer Ubuntu), fais un Boot-Info et donne l'URL de ce Boot-Info dans ta réponse. On pourra voir si ta vieille LiveUSB est toujours vivante (moi je crois qu'elle est morte et que le message que tu vois à l'écran, c'est parce que ton ordi démarre sur ton disque dur qui a un problème)

Dernière modification par malbo (Le 21/09/2015, à 07:44)

Hors ligne

#3 Le 21/09/2015, à 09:21

siorac

Re : Impossible de lancer ubuntu : busybox

Bonjour, et merci pour ton aide. Malheureusement, sans pc, impossible de faire une nouvelle live usb... est ce qu'il est toujours possible de se faire envoyer un cv?

Hors ligne

#4 Le 21/09/2015, à 09:43

siorac

Re : Impossible de lancer ubuntu : busybox

cd pardon

Hors ligne

#5 Le 21/09/2015, à 09:57

fench

Re : Impossible de lancer ubuntu : busybox

Bonjour,

Tu as la patience d'attendre un CD ?
Oui, tu peux te faire envoyer un CD mais ce n'est plus gratuit comme avant.

Si tu écris sur ce forum, c'est que tu as bien un PC à disposition je pense. Ou alors, tu écris avec ton smartphone smile Dans ce cas, emprunte le PC de quelqu'un.
Si c'est un PC sous Windows, tu peux aussi créer un LiveUSB sous Windows https://doc.ubuntu-fr.org/live_usb#crea … is_windows


Desktop : Xubuntu 16.04.6 LTS
Portable : Xubuntu 18.04 LTS

Hors ligne

#6 Le 21/09/2015, à 15:17

siorac

Re : Impossible de lancer ubuntu : busybox

Je n'ai pas windows sur le pc... je vais voir s'il me reste pas une live usb d'une ancienne version, sait-on jamais!

Hors ligne

#7 Le 21/09/2015, à 18:57

siorac

Re : Impossible de lancer ubuntu : busybox

J'ai trouvé une live usb! voici le lien http://paste.ubuntu.com/12515396

Dernière modification par siorac (Le 21/09/2015, à 18:58)

Hors ligne

#8 Le 22/09/2015, à 07:32

malbo

Re : Impossible de lancer ubuntu : busybox

Ton Boot-Info est là :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 9Feb2015]


============================= Boot Info Summary: ===============================

 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sde.
 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdf.

sde1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.05 20140113
    Boot sector info:  Syslinux looks at sector 2053744 of /dev/sde1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux/syslinux.cfg 
                       /casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys

sdf1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.05 20140113
    Boot sector info:  Syslinux looks at sector 2089900 of /dev/sdf1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux/syslinux.cfg 
                       /casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sde _____________________________________________________________________

Disk /dev/sde: 4004 MB, 4004511744 bytes
116 heads, 51 sectors/track, 1322 cylinders, total 7821312 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sde1    *             32     7,821,311     7,821,280   c W95 FAT32 (LBA)


Drive: sdf _____________________________________________________________________

Disk /dev/sdf: 8004 MB, 8004304896 bytes
35 heads, 21 sectors/track, 21269 cylinders, total 15633408 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdf1    *             63    15,633,407    15,633,345   c W95 FAT32 (LBA)


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sde1        42D9-D8AE                              vfat       
/dev/sdf1        26C8-A956                              vfat       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Sep 21 16:48 ata-ATAPI_iHAS124_E_3524665_278409500297 -> ../../sr0
lrwxrwxrwx 1 root root  9 Sep 21 16:48 usb-Generic_USB_CF_Reader_2004888-0:1 -> ../../sdb
lrwxrwxrwx 1 root root  9 Sep 21 16:48 usb-Generic_USB_MS_Reader_2004888-0:3 -> ../../sdd
lrwxrwxrwx 1 root root  9 Sep 21 16:48 usb-Generic_USB_SD_Reader_2004888-0:0 -> ../../sda
lrwxrwxrwx 1 root root  9 Sep 21 16:48 usb-Generic_USB_SM_Reader_2004888-0:2 -> ../../sdc
lrwxrwxrwx 1 root root  9 Sep 21 16:53 usb-SanDisk_Cruzer_Blade_4C530301520325101292-0:0 -> ../../sde
lrwxrwxrwx 1 root root 10 Sep 21 16:48 usb-SanDisk_Cruzer_Blade_4C530301520325101292-0:0-part1 -> ../../sde1
lrwxrwxrwx 1 root root  9 Sep 21 16:52 usb-SanDisk_Cruzer_Pop_4C532000051003121100-0:0 -> ../../sdf
lrwxrwxrwx 1 root root 10 Sep 21 16:52 usb-SanDisk_Cruzer_Pop_4C532000051003121100-0:0-part1 -> ../../sdf1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sde1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sdf1        /media/ubuntu/26C8-A956  vfat       (ro,nosuid,nodev,uid=999,gid=999,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)


=========================== sde1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  boot=casper integrity-check quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

========================= sde1/syslinux/syslinux.cfg: ==========================

--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------

============== sde1: Version of COM32(R) files used by Syslinux: ===============

 syslinux/chain.c32                 :  COM32R module (v4.xx)
 syslinux/gfxboot.c32               :  COM32R module (v4.xx)
 syslinux/vesamenu.c32              :  COM32R module (v4.xx)

=========================== sdf1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  boot=casper integrity-check quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

========================= sdf1/syslinux/syslinux.cfg: ==========================

--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------

============== sdf1: Version of COM32(R) files used by Syslinux: ===============

 syslinux/chain.c32                 :  COM32R module (v4.xx)
 syslinux/gfxboot.c32               :  COM32R module (v4.xx)
 syslinux/vesamenu.c32              :  COM32R module (v4.xx)

========= Devices which don't seem to have a corresponding hard drive: =========

sda sdb sdc sdd 

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/6573/mounts) leaked on lvs invocation. Parent PID 11496: bash
File descriptor 63 (pipe:[52969]) leaked on lvs invocation. Parent PID 11496: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-info 2015-09-21__16h53 ===================
boot-info version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-info is executed in live-session (Ubuntu 14.04.2 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
ls: cannot access /home/usr/.config: No such file or directory

=================== os-prober:


=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sde1: UUID="42D9-D8AE" TYPE="vfat"
/dev/sdf1: UUID="26C8-A956" TYPE="vfat"

=================== No kernel in /media/ubuntu/26C8-A956/boot:
grub



=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.


=================== PARTITIONS & DISKS:
sdf1	: sdf,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-kernel,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/media/ubuntu/26C8-A956.

sdf	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	liveusb,	no-os,	63 sectors * 512 bytes


=================== parted -l:

Model: SanDisk Cruzer Blade (scsi)
Disk /dev/sde: 4005MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      16.4kB  4005MB  4004MB  primary  fat32        boot, lba


Warning: Unable to open /dev/sdf read-write (Read-only file system).  /dev/sdf has been opened read-only.
Model: SanDisk Cruzer Pop (scsi)
Disk /dev/sdf: 8004MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      32.3kB  8004MB  8004MB  primary  fat32        boot, lba

=================== parted -lm:

BYT;
/dev/sde:4005MB:scsi:512:512:msdos:SanDisk Cruzer Blade;
1:16.4kB:4005MB:4004MB:fat32::boot, lba;

Warning: Unable to open /dev/sdf read-write (Read-only file system).  /dev/sdf has been opened read-only.
BYT;
/dev/sdf:8004MB:scsi:512:512:msdos:SanDisk Cruzer Pop;
1:32.3kB:8004MB:8004MB:fat32::boot, lba;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL MODEL      UUID
sde   disk            3.7G       Cruzer Bla
sde1  part vfat       3.7G                  42D9-D8AE
sdf   disk            7.5G       Cruzer Pop
sdf1  part vfat       7.5G                  26C8-A956
sr0   rom            1024M       iHAS124
loop0 loop squashfs   953M

KNAME ROTA RO RM STATE   MOUNTPOINT
sde      1  0  1 running
sde1     1  0  1         /cdrom
sdf      1  1  1 running
sdf1     1  1  1         /media/ubuntu/26C8-A956
sr0      1  0  1 running
loop0    1  1  0         /rofs


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sde1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sdf1 on /media/ubuntu/26C8-A956 type vfat (ro,nosuid,nodev,uid=999,gid=999,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdd (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sde (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sde1 size slaves stat subsystem trace uevent
/sys/block/sdf (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdf1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sdb sdc sdd sde sde1 sdf sdf1 sg0 sg1 sg2 sg3 sg4 sg5 sg6 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper:  control
ls sdf1/efi: /BOOT/grubx64.efi /BOOT/BOOTx64.EFI
ls sdf1: autorun.inf
boot
casper
casper-rw
dists
EFI
install
ldlinux.sys
md5sum.txt
pics
pool
preseed
README.diskdefines
syslinux
wubi.exe  . Please report this message to boot.repair@gmail.com

=================== hexdump -n512 -C /dev/sdf1
00000000  eb 58 90 53 59 53 4c 49  4e 55 58 00 02 08 20 00  |.X.SYSLINUX... .|
00000010  02 00 00 00 00 f8 00 00  3e 00 f7 00 3f 00 00 00  |........>...?...|
00000020  c1 8b ee 00 86 3b 00 00  00 00 00 00 02 00 00 00  |.....;..........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 56 a9 c8 26 20  20 20 20 20 20 20 20 20  |..)V..&         |
00000050  20 20 46 41 54 33 32 20  20 20 fa fc 31 c9 8e d1  |  FAT32   ..1...|
00000060  bc 76 7b 52 06 57 1e 56  8e c1 b1 26 bf 78 7b f3  |.v{R.W.V...&.x{.|
00000070  a5 8e d9 bb 78 00 0f b4  37 0f a0 56 20 d2 78 1b  |....x...7..V .x.|
00000080  31 c0 b1 06 89 3f 89 47  02 f3 64 a5 8a 0e 18 7c  |1....?.G..d....||
00000090  88 4d f8 50 50 50 50 cd  13 eb 62 8b 55 aa 8b 75  |.M.PPPP...b.U..u|
000000a0  a8 c1 ee 04 01 f2 83 fa  4f 76 31 81 fa b2 07 73  |........Ov1....s|
000000b0  2b f6 45 b4 7f 75 25 38  4d b8 74 20 66 3d 21 47  |+.E..u%8M.t f=!G|
000000c0  50 54 75 10 80 7d b8 ed  75 0a 66 ff 75 ec 66 ff  |PTu..}..u.f.u.f.|
000000d0  75 e8 eb 0f 51 51 66 ff  75 bc eb 07 51 51 66 ff  |u...QQf.u...QQf.|
000000e0  36 1c 7c b4 08 e8 e9 00  72 13 20 e4 75 0f c1 ea  |6.|.....r. .u...|
000000f0  08 42 89 16 1a 7c 83 e1  3f 89 0e 18 7c fb bb aa  |.B...|..?...|...|
00000100  55 b4 41 e8 cb 00 72 10  81 fb 55 aa 75 0a f6 c1  |U.A...r...U.u...|
00000110  01 74 05 c6 06 46 7d 00  66 b8 ac e3 1f 00 66 ba  |.t...F}.f.....f.|
00000120  00 00 00 00 bb 00 80 e8  0e 00 66 81 3e 1c 80 8a  |..........f.>...|
00000130  99 61 6c 75 74 e9 f8 02  66 03 06 60 7b 66 13 16  |.alut...f..`{f..|
00000140  64 7b b9 10 00 eb 2b 66  52 66 50 06 53 6a 01 6a  |d{....+fRfP.Sj.j|
00000150  10 89 e6 66 60 b4 42 e8  77 00 66 61 8d 64 10 72  |...f`.B.w.fa.d.r|
00000160  01 c3 66 60 31 c0 e8 68  00 66 61 e2 da c6 06 46  |..f`1..h.fa....F|
00000170  7d 2b 66 60 66 0f b7 36  18 7c 66 0f b7 3e 1a 7c  |}+f`f..6.|f..>.||
00000180  66 f7 f6 31 c9 87 ca 66  f7 f7 66 3d ff 03 00 00  |f..1...f..f=....|
00000190  77 17 c0 e4 06 41 08 e1  88 c5 88 d6 b8 01 02 e8  |w....A..........|
000001a0  2f 00 66 61 72 01 c3 e2  c9 31 f6 8e d6 bc 68 7b  |/.far....1....h{|
000001b0  8e de 66 8f 06 78 00 be  da 7d ac 20 c0 74 09 b4  |..f..x...}. .t..|
000001c0  0e bb 07 00 cd 10 eb f2  31 c0 cd 16 cd 19 f4 eb  |........1.......|
000001d0  fd 8a 16 74 7b 06 cd 13  07 c3 42 6f 6f 74 20 65  |...t{.....Boot e|
000001e0  72 72 6f 72 0d 0a 00 00  00 00 00 00 00 00 00 00  |rror............|
000001f0  00 00 00 00 00 00 00 00  fe 02 b2 3e 18 37 55 aa  |...........>.7U.|
00000200

=================== df -Th:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs  1.9G  123M  1.8G   7% /
udev           devtmpfs   1.9G   12K  1.9G   1% /dev
tmpfs          tmpfs      383M  1.4M  382M   1% /run
/dev/sde1      vfat       3.8G  996M  2.8G  27% /cdrom
/dev/loop0     squashfs   953M  953M     0 100% /rofs
none           tmpfs      4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs      1.9G  1.2M  1.9G   1% /tmp
none           tmpfs      5.0M  4.0K  5.0M   1% /run/lock
none           tmpfs      1.9G   76K  1.9G   1% /run/shm
none           tmpfs      100M   68K  100M   1% /run/user
/dev/sdf1      vfat       7.5G  5.0G  2.5G  67% /media/ubuntu/26C8-A956

=================== fdisk -l:

Disk /dev/sde: 4004 MB, 4004511744 bytes
116 heads, 51 sectors/track, 1322 cylinders, total 7821312 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x195f3efb

Device Boot      Start         End      Blocks   Id  System
/dev/sde1   *          32     7821311     3910640    c  W95 FAT32 (LBA)

Disk /dev/sdf: 8004 MB, 8004304896 bytes
35 heads, 21 sectors/track, 21269 cylinders, total 15633408 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000e227a

Device Boot      Start         End      Blocks   Id  System
/dev/sdf1   *          63    15633407     7816672+   c  W95 FAT32 (LBA)


No OS or WinEFI system
gui-tab-other.sh: line 94: _checkbutton_repairfilesystems: command not found


=================== Suggested repair
The default repair of the Boot-Repair utility would not act on the MBR.
Additional repair would be performed:  repair-filesystems


=================== User settings
The settings chosen by the user will not act on the boot.

Je vois ceci :

Warning: Unable to open /dev/sdf read-write (Read-only file system).  /dev/sdf has been opened read-only.
Model: SanDisk Cruzer Pop (scsi)
Disk /dev/sdf: 8004MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      32.3kB  8004MB  8004MB  primary  fat32        boot, lba

Le Warning indique que l'accès en écriture à ta LiveUSB SanDisk Cruzer Pop (8 Go) est bloqué. Je ne sais pas si c'est un indice que cette clé est malade mais ça ne me parait pas trop normal qu'elle ne soit pas accessible en écriture. A part cela, je ne vois pas d'autre anomalie mais on ne peut pas tout voir avec Boot-Info.

Hors ligne

#9 Le 22/09/2015, à 07:49

siorac

Re : Impossible de lancer ubuntu : busybox

Bonjour, merci pour ton aide smile

Je vais peut être dire une énormité, mais est-ce que je peux tenter de la formater, puis la repréparer pour un live usb? Ou bien je laisse tomber et j'achète directement une nouvelle clé?

Hors ligne

#10 Le 22/09/2015, à 08:18

malbo

Re : Impossible de lancer ubuntu : busybox

Ce n'est pas du tout une énormité. Mais avant de tout modifier, ce serait bien que tu complètes l'analyse du problème en faisant quelques essais depuis une session Windows pour confirmer que c'est impossible d'écrire sur cette clé USB. Depuis Windows, essaie de créer un nouveau dossier dans cette clé malade et si ça ne veut pas c'est que l'écriture est impossible. Essaie de faire de même avec ta nouvelle LiveUSB, c'est à dire essaie de créer un nouveau dossier dedans depuis une session Windows pour t'assurer que tu peux le faire.

Hors ligne