#1 Le 13/09/2015, à 10:45
- colinjeanne
disque dur invisible après formatage
résolu
Bonjour,
J'ai effectué un formatage avec clic droit formatage. Depuis le disque dur n'est plus visible ans ma fenêtre fichier. J'ai tenté de refaire l'opération avec Gparted mais il ne veut pas se lancer: message d'erreur Avertissement de libparted Erreur de synchronisation/fermeture /dev/sdc1: Erreur d'entrée/sortie sur l'hôte cible
Si quelqu'un a une idée?
Cordialement
Dernière modification par colinjeanne (Le 29/09/2015, à 19:50)
Hors ligne
#2 Le 13/09/2015, à 11:01
- lobo
Re : disque dur invisible après formatage
Question toute bête est-ce qu'un reboot a été fait après le formatage. Des fois le démontage du disque ne se passe pas bien.
Sinon comment est vu le disque dans Gparted (comme un espace libre ? comme une partition avec le bon système de fichier ?)
"Il faut cueillir les cerises avec la queue. J'avais déjà du mal avec les mains !"- Coluche
Hors ligne
#3 Le 13/09/2015, à 14:03
- colinjeanne
Re : disque dur invisible après formatage
Je ne sais pas se qu'un reboot. Mais après le formatage je n'ai rien fait. Quand à Gparted il plante dés que je le lance avec le disque dur externe branché.
Hors ligne
#4 Le 13/09/2015, à 14:45
- lobo
Re : disque dur invisible après formatage
Un reboot est un redémarrage de l'ordinateur.
Parfois les disques sont mal démontés (des processus rattachés au dique continuent de fonctionner et empêchent de démonter/remonter une partition).
Un redémarrage permet de forcer (facilement) le démontage d'une partition. Peut-être que formatage passera mieux après coup ...
Dernière modification par lobo (Le 13/09/2015, à 14:46)
"Il faut cueillir les cerises avec la queue. J'avais déjà du mal avec les mains !"- Coluche
Hors ligne
#5 Le 13/09/2015, à 14:51
- colinjeanne
Re : disque dur invisible après formatage
Non ça ne donne rien. Lorsque je lance gparted avec le disque dur externe branche cela affiche
Erreur de synchronisation/fermeture /dev/sdc1: Erreur d'entrée/sortie sur l'hôte cible
Hors ligne
#6 Le 14/09/2015, à 12:57
- LeJediGris
Re : disque dur invisible après formatage
Bonjour,
Vérifie si il apparait sur le bureau en icone (à mon avis non), si oui clic droit et choisir [Démonter]
Débranches-le,
rebranches-le et donnes-nous le résultat de la commande:
dmesg | tail 30
A+
%NOINDEX%
Matos Asus Zenbook
"Home Made" Monstro: core i7 9700+32Go de mémoire+SSD QVO Samsung 1To +MoBo Asus Prime Z390P
+ "Terminator", core i5 3570, 16Go, SSD Intel 520 sous Mint 19.3, Freebox Revolution
Hors ligne
#7 Le 14/09/2015, à 16:51
- colinjeanne
Re : disque dur invisible après formatage
Bonjour,
Le disque dur n’apparaît pas non plus sur le bureau
Hors ligne
#8 Le 20/09/2015, à 21:05
- colinjeanne
Re : disque dur invisible après formatage
Bonjour,
Mon problème ne semble soluble à personne?
J'ai fait la manipulation à ne pas faire?
J'aimerais bien ne pas a avoir a jeter mon disque dur!
A l'aide!!!
Colin Jeanne
Hors ligne
#9 Le 20/09/2015, à 21:22
- cqfd93
Re : disque dur invisible après formatage
Bonjour,
Fais déjà ce que LeJediGris t'a demandé dans son message #6.
− cqfd93 −
Hors ligne
#10 Le 20/09/2015, à 21:25
- moko138
Re : disque dur invisible après formatage
Vérifie si il apparait sur le bureau en icone (à mon avis non), si oui clic droit et choisir [Démonter]
Débranches-le,
rebranches-le et donnes-nous le résultat de la commande:dmesg | tail 30
Ça fait six jours que LeJediGris t'a prescrit cette manip' e( t'a demandé ce retour de commande...
Qu'attends-tu ?
ps : grillé par cqfd93
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#11 Le 22/09/2015, à 17:21
- LeJediGris
Re : disque dur invisible après formatage
Bon ben... on laisse tomber ? c'est un sacerdoce ici...:D
%NOINDEX%
Matos Asus Zenbook
"Home Made" Monstro: core i7 9700+32Go de mémoire+SSD QVO Samsung 1To +MoBo Asus Prime Z390P
+ "Terminator", core i5 3570, 16Go, SSD Intel 520 sous Mint 19.3, Freebox Revolution
Hors ligne
#12 Le 22/09/2015, à 17:23
- LeJediGris
Re : disque dur invisible après formatage
Ceci dit c'est de ma faute, pas assez explicite donc:
Si NON (il n'apparait pas sur le bureau)
Fais la manip que j'ai décrite !!
Je subodores un PB connu de mauvais démontage windows...
A+
%NOINDEX%
Matos Asus Zenbook
"Home Made" Monstro: core i7 9700+32Go de mémoire+SSD QVO Samsung 1To +MoBo Asus Prime Z390P
+ "Terminator", core i5 3570, 16Go, SSD Intel 520 sous Mint 19.3, Freebox Revolution
Hors ligne
#13 Le 22/09/2015, à 18:10
- moko138
Re : disque dur invisible après formatage
colinjeanne, inscrit depuis le 10/9, n'a plus posté depuis 45 heures
Soit il/elle s'est découragé(e) trop tôt,
Soit il/elle a résolu son problème de son côté et n'a pas compris que l'usage est d'en informer ceux qui ont pris la peine de répondre à sa demande,
Soit il/elle dispose d'une connexion intermittente.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#14 Le 23/09/2015, à 17:07
- colinjeanne
Re : disque dur invisible après formatage
bonjour a tous, excusez mon retard...
LeJediGris, j'avais compris que ta manip devait être exécutée si mon disque dur apparaissait. voici ce qu'indique le terminal: tail/ impossible d'ouvrir "30" en lecture: Aucun fichier ou dossier de ce type
Effectivement vous êtes très réactifs. Je pensais que mon problème n'avait pas de solution.
Cordialement
Dernière modification par colinjeanne (Le 23/09/2015, à 17:09)
Hors ligne
#15 Le 23/09/2015, à 21:40
- moko138
Re : disque dur invisible après formatage
Fais
cd && dmesg | tail -90
et colle ici le retour entre balises-code (les < > bleus de la barre de mise en forme) comme indiqué par ljere sur ce .gif.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#16 Le 24/09/2015, à 20:11
- colinjeanne
Re : disque dur invisible après formatage
Bonjour Moko138. J'espère avoir fait la bonne manip balises code
pclf@pclf761:~$ cd && dmesg | tail -90
[ 3.992663] sound hdaudioC1D0: inputs:
[ 3.992666] sound hdaudioC1D0: Internal Mic=0x19
[ 3.992668] sound hdaudioC1D0: Mic=0x18
[ 3.995636] AVX2 version of gcm_enc/dec engaged.
[ 3.995639] AES CTR mode by8 optimization enabled
[ 3.998212] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 3.998285] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 3.999744] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input16
[ 3.999818] usbcore: registered new interface driver uvcvideo
[ 3.999820] USB Video Class driver (1.1.1)
[ 4.015473] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 4.015548] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 4.015608] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[ 4.032873] intel_rapl: Found RAPL domain package
[ 4.032877] intel_rapl: Found RAPL domain core
[ 4.032879] intel_rapl: Found RAPL domain uncore
[ 4.032880] intel_rapl: Found RAPL domain dram
[ 4.067150] cfg80211: World regulatory domain updated:
[ 4.067154] cfg80211: DFS Master region: unset
[ 4.067155] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.067157] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.067158] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.067159] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.067161] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4.067162] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 4.067164] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 4.067165] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.067166] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 4.096202] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 4.206767] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 4.424641] Adding 3998716k swap on /dev/sdb5. Priority:-1 extents:1 across:3998716k FS
[ 4.622362] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 4.640350] systemd-journald[289]: Received request to flush runtime journal from PID 1
[ 4.740106] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.777110] audit: type=1400 audit(1443120390.613:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=591 comm="apparmor_parser"
[ 4.777116] audit: type=1400 audit(1443120390.613:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=591 comm="apparmor_parser"
[ 4.778546] audit: type=1400 audit(1443120390.617:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=591 comm="apparmor_parser"
[ 4.778551] audit: type=1400 audit(1443120390.617:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=591 comm="apparmor_parser"
[ 4.778554] audit: type=1400 audit(1443120390.617:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=591 comm="apparmor_parser"
[ 4.778558] audit: type=1400 audit(1443120390.617:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=591 comm="apparmor_parser"
[ 4.785277] audit: type=1400 audit(1443120390.621:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=591 comm="apparmor_parser"
[ 4.785283] audit: type=1400 audit(1443120390.621:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=591 comm="apparmor_parser"
[ 4.785288] audit: type=1400 audit(1443120390.621:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=591 comm="apparmor_parser"
[ 4.947458] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.947462] Bluetooth: BNEP filters: protocol multicast
[ 4.947466] Bluetooth: BNEP socket layer initialized
[ 4.952488] Bluetooth: RFCOMM TTY layer initialized
[ 4.952496] Bluetooth: RFCOMM socket layer initialized
[ 4.952500] Bluetooth: RFCOMM ver 1.11
[ 4.953478] Non-volatile memory driver v1.3
[ 5.263996] r8169 0000:03:00.1 eth0: link down
[ 5.265608] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 5.265887] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 5.774036] wlan0: authenticate with 96:b2:69:fd:95:06
[ 5.776824] wlan0: send auth to 96:b2:69:fd:95:06 (try 1/3)
[ 5.780131] wlan0: authenticated
[ 5.782122] wlan0: associate with 96:b2:69:fd:95:06 (try 1/3)
[ 5.799485] wlan0: RX AssocResp from 96:b2:69:fd:95:06 (capab=0x401 status=0 aid=2)
[ 5.802489] wlan0: associated
[ 74.956415] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 75.052284] ISOFS: changing to secondary root
[ 763.509113] wlan0: deauthenticating from 96:b2:69:fd:95:06 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 763.515059] cfg80211: Calling CRDA to update world regulatory domain
[ 763.915327] cfg80211: Calling CRDA to update world regulatory domain
[ 764.047495] cfg80211: World regulatory domain updated:
[ 764.047500] cfg80211: DFS Master region: unset
[ 764.047502] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 764.047505] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 764.047507] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 764.047509] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 764.047512] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 764.047514] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 764.047516] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 764.047518] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 764.047520] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 774.538510] wlan0: authenticate with 64:7c:34:ce:f4:fc
[ 774.543443] wlan0: send auth to 64:7c:34:ce:f4:fc (try 1/3)
[ 774.545798] wlan0: authenticated
[ 774.548416] wlan0: associate with 64:7c:34:ce:f4:fc (try 1/3)
[ 774.565314] wlan0: RX AssocResp from 64:7c:34:ce:f4:fc (capab=0xc11 status=0 aid=1)
[ 774.578528] wlan0: associated
[ 774.578881] cfg80211: Calling CRDA for country: FR
[ 774.913839] cfg80211: Regulatory domain changed to country: FR
[ 774.913844] cfg80211: DFS Master region: ETSI
[ 774.913845] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 774.913848] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 774.913851] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 774.913853] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 774.913855] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 774.913857] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
pclf@pclf761:~$
Dernière modification par colinjeanne (Le 24/09/2015, à 22:31)
Hors ligne
#17 Le 25/09/2015, à 06:43
- moko138
Re : disque dur invisible après formatage
Bizarre.
On ne voit que sdb (pas de sda).
Ceci aussi :
[ 74.956415] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 75.052284] ISOFS: changing to secondary root
m'étonne.
Ton HD est-ce un DDE ou un HD interne ?
Etait-il bien branché et alimenté ?
Donne, disque branché depuis 30 secondes
sudo parted -l
dmesg | tail -35
(c'est un L minuscule).
Dernière modification par moko138 (Le 25/09/2015, à 15:55)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#18 Le 25/09/2015, à 14:39
- LeJediGris
Re : disque dur invisible après formatage
@Moko: Je ne suis pas sûr qu'elle est correctement débranché puis rebranché le Disque dur externe.
Donc:
1) Tu débranches ton disque dur externe, PC en fonctionnement ou pas
2) PC démarré et en fonctionnement, , tu rebranches ton disque dur externe
3) tu attends 10-20 secondes
4) tu démarre un terminal et fais les commandes demandées par Moko
5) Tu nous postes les resultats des commandes
Merci et bon courage !!
%NOINDEX%
Matos Asus Zenbook
"Home Made" Monstro: core i7 9700+32Go de mémoire+SSD QVO Samsung 1To +MoBo Asus Prime Z390P
+ "Terminator", core i5 3570, 16Go, SSD Intel 520 sous Mint 19.3, Freebox Revolution
Hors ligne
#19 Le 25/09/2015, à 15:49
- moko138
Re : disque dur invisible après formatage
Oui.
En plus, j'avais mal lu :
[ 4.424641] Adding 3998716k swap on /dev/sdb5. (...)
[ 4.622362] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro # racine en sda1
mais les interrogations subsistent.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#20 Le 25/09/2015, à 17:27
- colinjeanne
Re : disque dur invisible après formatage
bonjour moko 138 et LeJediGris.
Voici la réponse:
pclf@pclf761:~$ [ 74.956415] ISO 9660 Extensions: Microsoft Joliet Level 1
bash: [: « ] » manquant
pclf@pclf761:~$ [ 75.052284] ISOFS: changing to secondary root
bash: [: « ] » manquant
pclf@pclf761:~$
Je ne sais pas si ça peut aider mais mon disque dur externe était branché sur un mac (je lis microsoft dans nos commandes.
2eme commande
pclf@pclf761:~$ sudo parted -l
[sudo] password for pclf:
Modèle: ATA ADATA SP310 (scsi)
Disque /dev/sda : 32,0GB
Taille des secteurs (logiques/physiques): 512B/512B
Table de partitions : msdos
Disk Flags:
Numéro Début Fin Taille Type Système de fichiers Fanions
1 1049kB 32,0GB 32,0GB primary ext4 démarrage
Modèle: ATA HGST HTS725050A7 (scsi)
Disque /dev/sdb : 500GB
Taille des secteurs (logiques/physiques): 512B/4096B
Table de partitions : msdos
Disk Flags:
Numéro Début Fin Taille Type Système de fichiers Fanions
1 1049kB 496GB 496GB primary ext4
2 496GB 500GB 4095MB extended
5 496GB 500GB 4095MB logical linux-swap(v1)
Avertissement: Impossible d'ouvrir /dev/sr0 en lecture-écriture (Système de
fichiers accessible en lecture seulement). /dev/sr0 a été ouvert en lecture
seule.
Avertissement: Le descripteur du pilote indique une taille physique de bloc de
512 octets, mais Linux lui indique 2048 octets.
Ignorer/Ignore/Annuler/Cancel?
3 eme commande
pclf@pclf761:~$ dmesg | tail -35
[ 7.667481] audit: type=1400 audit(1443198505.506:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=596 comm="apparmor_parser"
[ 7.667488] audit: type=1400 audit(1443198505.506:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=596 comm="apparmor_parser"
[ 7.667493] audit: type=1400 audit(1443198505.506:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=596 comm="apparmor_parser"
[ 7.667499] audit: type=1400 audit(1443198505.506:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=596 comm="apparmor_parser"
[ 7.674346] audit: type=1400 audit(1443198505.510:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=596 comm="apparmor_parser"
[ 7.674355] audit: type=1400 audit(1443198505.510:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=596 comm="apparmor_parser"
[ 7.674359] audit: type=1400 audit(1443198505.510:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=596 comm="apparmor_parser"
[ 7.674364] audit: type=1400 audit(1443198505.510:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=596 comm="apparmor_parser"
[ 7.827599] Non-volatile memory driver v1.3
[ 7.845312] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.845316] Bluetooth: BNEP filters: protocol multicast
[ 7.845321] Bluetooth: BNEP socket layer initialized
[ 7.870630] Bluetooth: RFCOMM TTY layer initialized
[ 7.870638] Bluetooth: RFCOMM socket layer initialized
[ 7.870643] Bluetooth: RFCOMM ver 1.11
[ 8.205766] r8169 0000:03:00.1 eth0: link down
[ 8.206976] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 8.207238] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 8.739158] wlan0: authenticate with 64:7c:34:ce:f4:fc
[ 8.741959] wlan0: send auth to 64:7c:34:ce:f4:fc (try 1/3)
[ 8.743777] wlan0: authenticated
[ 8.747827] wlan0: associate with 64:7c:34:ce:f4:fc (try 1/3)
[ 8.751776] wlan0: RX AssocResp from 64:7c:34:ce:f4:fc (capab=0xc11 status=0 aid=1)
[ 8.753011] wlan0: associated
[ 8.753066] cfg80211: Calling CRDA for country: FR
[ 8.816023] cfg80211: Regulatory domain changed to country: FR
[ 8.816027] cfg80211: DFS Master region: ETSI
[ 8.816028] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 8.816031] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.816034] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 8.816037] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 8.816039] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 8.816041] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 30.525098] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 30.620931] ISOFS: changing to secondary root
Voila...
Dernière modification par colinjeanne (Le 25/09/2015, à 17:35)
Hors ligne
#21 Le 25/09/2015, à 20:20
- moko138
Re : disque dur invisible après formatage
Je ne vois pas trace de DDE dans dmesg ni dans parted.
D'où l'impression que c'est la connectique qui ne remplit pas son rôle, ou bien les modules usb.
colinjeanne, comment ton DDE est-il connecté ? (usb ou sata ou ?)
Donne aussi
uname -a
LeJediGris, qu'en penses-tu ?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#22 Le 25/09/2015, à 21:32
- colinjeanne
Re : disque dur invisible après formatage
Mon DDE est connecté sur un USB (USB 2.0 niveau DDE) je n'en ai pas d'autre pour changer. Mais avant que je fasse ma bidouille (clic droit formatage) il fonctionnait bien en lecture seul. De plus, lorsque je lance Gparted le fait qu'il soit branché fait planter le programme.
pclf@pclf761:~$ uname -a
Linux pclf761 3.19.0-28-generic #30-Ubuntu SMP Mon Aug 31 15:52:51 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
pclf@pclf761:~$
merci pour votre temps de méninges.
Hors ligne
#23 Le 25/09/2015, à 21:56
- moko138
Re : disque dur invisible après formatage
Donne
sudo apt-get update
puis, s'il n'y a pas eu d'erreur, enchaîne avec
sudo apt-get dist-upgrade
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#24 Le 25/09/2015, à 22:03
- colinjeanne
Re : disque dur invisible après formatage
pclf@pclf761:~$ sudo apt-get update
[sudo] password for pclf:
Ign http://ppa.launchpad.net vivid InRelease
Ign http://security.ubuntu.com vivid-security InRelease
Atteint http://ppa.launchpad.net vivid Release.gpg
Atteint http://security.ubuntu.com vivid-security Release.gpg
Atteint http://ppa.launchpad.net vivid Release
Atteint http://security.ubuntu.com vivid-security Release
Atteint http://ppa.launchpad.net vivid/main amd64 Packages
Atteint http://security.ubuntu.com vivid-security/main Sources
Ign http://fr.archive.ubuntu.com vivid InRelease
Atteint http://ppa.launchpad.net vivid/main i386 Packages
Atteint http://security.ubuntu.com vivid-security/restricted Sources
Atteint http://ppa.launchpad.net vivid/main Translation-en
Atteint http://security.ubuntu.com vivid-security/universe Sources
Ign http://fr.archive.ubuntu.com vivid-updates InRelease
Atteint http://security.ubuntu.com vivid-security/multiverse Sources
Atteint http://security.ubuntu.com vivid-security/main amd64 Packages
Atteint http://security.ubuntu.com vivid-security/restricted amd64 Packages
Ign http://fr.archive.ubuntu.com vivid-backports InRelease
Atteint http://security.ubuntu.com vivid-security/universe amd64 Packages
Atteint http://security.ubuntu.com vivid-security/multiverse amd64 Packages
Atteint http://security.ubuntu.com vivid-security/main i386 Packages
Atteint http://fr.archive.ubuntu.com vivid Release.gpg
Atteint http://security.ubuntu.com vivid-security/restricted i386 Packages
Atteint http://security.ubuntu.com vivid-security/universe i386 Packages
Atteint http://security.ubuntu.com vivid-security/multiverse i386 Packages
Atteint http://fr.archive.ubuntu.com vivid-updates Release.gpg
Atteint http://security.ubuntu.com vivid-security/main Translation-en
Atteint http://security.ubuntu.com vivid-security/multiverse Translation-en
Atteint http://security.ubuntu.com vivid-security/restricted Translation-en
Atteint http://fr.archive.ubuntu.com vivid-backports Release.gpg
Atteint http://fr.archive.ubuntu.com vivid Release
Atteint http://security.ubuntu.com vivid-security/universe Translation-en
Atteint http://fr.archive.ubuntu.com vivid-updates Release
Atteint http://fr.archive.ubuntu.com vivid-backports Release
Atteint http://fr.archive.ubuntu.com vivid/main Sources
Atteint http://fr.archive.ubuntu.com vivid/restricted Sources
Atteint http://fr.archive.ubuntu.com vivid/universe Sources
Atteint http://fr.archive.ubuntu.com vivid/multiverse Sources
Atteint http://fr.archive.ubuntu.com vivid/main amd64 Packages
Atteint http://fr.archive.ubuntu.com vivid/restricted amd64 Packages
Atteint http://fr.archive.ubuntu.com vivid/universe amd64 Packages
Atteint http://fr.archive.ubuntu.com vivid/multiverse amd64 Packages
Atteint http://fr.archive.ubuntu.com vivid/main i386 Packages
Atteint http://fr.archive.ubuntu.com vivid/restricted i386 Packages
Atteint http://fr.archive.ubuntu.com vivid/universe i386 Packages
Atteint http://fr.archive.ubuntu.com vivid/multiverse i386 Packages
Atteint http://fr.archive.ubuntu.com vivid/main Translation-fr
Atteint http://fr.archive.ubuntu.com vivid/main Translation-en
Atteint http://fr.archive.ubuntu.com vivid/multiverse Translation-fr
Atteint http://fr.archive.ubuntu.com vivid/multiverse Translation-en
Atteint http://fr.archive.ubuntu.com vivid/restricted Translation-fr
Atteint http://fr.archive.ubuntu.com vivid/restricted Translation-en
Atteint http://fr.archive.ubuntu.com vivid/universe Translation-fr
Atteint http://fr.archive.ubuntu.com vivid/universe Translation-en
Atteint http://fr.archive.ubuntu.com vivid-updates/main Sources
Atteint http://fr.archive.ubuntu.com vivid-updates/restricted Sources
Atteint http://fr.archive.ubuntu.com vivid-updates/universe Sources
Atteint http://fr.archive.ubuntu.com vivid-updates/multiverse Sources
Atteint http://fr.archive.ubuntu.com vivid-updates/main amd64 Packages
Atteint http://fr.archive.ubuntu.com vivid-updates/restricted amd64 Packages
Atteint http://fr.archive.ubuntu.com vivid-updates/universe amd64 Packages
Atteint http://fr.archive.ubuntu.com vivid-updates/multiverse amd64 Packages
Atteint http://fr.archive.ubuntu.com vivid-updates/main i386 Packages
Atteint http://fr.archive.ubuntu.com vivid-updates/restricted i386 Packages
Atteint http://fr.archive.ubuntu.com vivid-updates/universe i386 Packages
Atteint http://fr.archive.ubuntu.com vivid-updates/multiverse i386 Packages
Atteint http://fr.archive.ubuntu.com vivid-updates/main Translation-en
Atteint http://fr.archive.ubuntu.com vivid-updates/multiverse Translation-en
Atteint http://fr.archive.ubuntu.com vivid-updates/restricted Translation-en
Atteint http://fr.archive.ubuntu.com vivid-updates/universe Translation-en
Atteint http://fr.archive.ubuntu.com vivid-backports/main Sources
Atteint http://fr.archive.ubuntu.com vivid-backports/restricted Sources
Atteint http://fr.archive.ubuntu.com vivid-backports/universe Sources
Atteint http://fr.archive.ubuntu.com vivid-backports/multiverse Sources
Atteint http://fr.archive.ubuntu.com vivid-backports/main amd64 Packages
Atteint http://fr.archive.ubuntu.com vivid-backports/restricted amd64 Packages
Atteint http://fr.archive.ubuntu.com vivid-backports/universe amd64 Packages
Atteint http://fr.archive.ubuntu.com vivid-backports/multiverse amd64 Packages
Atteint http://fr.archive.ubuntu.com vivid-backports/main i386 Packages
Atteint http://fr.archive.ubuntu.com vivid-backports/restricted i386 Packages
Atteint http://fr.archive.ubuntu.com vivid-backports/universe i386 Packages
Atteint http://fr.archive.ubuntu.com vivid-backports/multiverse i386 Packages
Atteint http://fr.archive.ubuntu.com vivid-backports/main Translation-en
Atteint http://fr.archive.ubuntu.com vivid-backports/multiverse Translation-en
Atteint http://fr.archive.ubuntu.com vivid-backports/restricted Translation-en
Atteint http://fr.archive.ubuntu.com vivid-backports/universe Translation-en
Lecture des listes de paquets... Fait
pclf@pclf761:~$ sudo apt-get dist-upgrade
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Calcul de la mise à jour... Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
cabextract libmspack0 linux-headers-3.19.0-25
linux-headers-3.19.0-25-generic linux-image-3.19.0-25-generic
linux-image-extra-3.19.0-25-generic linux-tools-3.19.0-25
linux-tools-3.19.0-25-generic p7zip
Veuillez utiliser « apt-get autoremove » pour les supprimer.
Fait
Les paquets suivants seront mis à jour :
apport apport-gtk chromium-codecs-ffmpeg-extra firefox firefox-locale-fr
flashplugin-installer irqbalance libnm-glib-vpn1 libnm-glib4 libnm-util2
lshw network-manager python3-apport python3-problem-report thermald
webaccounts-extension-common xserver-common xserver-xorg-core xul-ext-ubufox
xul-ext-webaccounts
20 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 46,5 Mo dans les archives.
Après cette opération, 1 919 ko d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n]
Je laisse le terminal en attente de peur de faire une connerie!
Hors ligne
#25 Le 25/09/2015, à 22:18
- moko138
Re : disque dur invisible après formatage
Ben valide. C'est une mise à jour ordinaire !
Mais ne fais PAS sudo apt-get autoremove.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne