Pages : 1
#1 Le 24/09/2015, à 10:00
- superwanus
probleme NVIDIA GT640 et port HDMI
Bonjour,
je viens de rajeunir un poil ma config, en ajoutant, entre autre, une carte graphique NVIDIA GT640 à celle-ci.
j'en ai profité pour instaler la dernière version d'ubuntu, pour repartir à neuf (14.04.3LTS)
Le truc marrant, c'est que j'ai mon écran branché sur le port VGA, qui fonctionne à ravir, mais que mon vidéoprojecteur, branché sur le port hdmi, ne fonctionne pas.
Bon j'ai quand même fait pas mal de trucs, je suis allé voir les réglages des écrans, mon vidéoprojecteur apparaît, est allumé mais aucun signal n'arrive à celui-ci.
Du coup j'ai regardé la doc, ai installé le pilote propriétaire correspondant, toujours rien sur l'autre écran (le vidéoproj).
J'ai fais plein d'autres trucs, ça fait 1 semaine que je galère, je me rappelle plus de tout, à part que ça m'a amené à réinstaller l'OS un bon paquet de fois...
Du coup j'appelle à l'aide, j'arrive pas à m'en sortir seul...
merci par avance!
/etc/X11/xorg.conf n'existe pas
/var/log/Xorg.0.log donne:
[ 15.374]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 15.374] X Protocol Version 11, Revision 0
[ 15.374] Build Operating System: Linux 3.2.0-77-generic x86_64 Ubuntu
[ 15.374] Current Operating System: Linux evarwan-fixe 3.19.0-28-generic #30~14.04.1-Ubuntu SMP Tue Sep 1 09:32:55 UTC 2015 x86_64
[ 15.374] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-28-generic.efi.signed root=UUID=447dcf98-2df1-4c27-9671-4f31a6785a1d ro quiet splash vt.handoff=7
[ 15.374] Build Date: 13 May 2015 04:35:05AM
[ 15.374] xorg-server 2:1.17.1-0ubuntu3~trusty1 (For technical support please see http://www.ubuntu.com/support)
[ 15.374] Current version of pixman: 0.30.2
[ 15.374] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.374] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.374] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 24 09:38:20 2015
[ 15.375] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 15.375] (==) No Layout section. Using the first Screen section.
[ 15.375] (==) No screen section available. Using defaults.
[ 15.375] (**) |-->Screen "Default Screen Section" (0)
[ 15.375] (**) | |-->Monitor "<default monitor>"
[ 15.375] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 15.375] (==) Automatically adding devices
[ 15.375] (==) Automatically enabling devices
[ 15.375] (==) Automatically adding GPU devices
[ 15.375] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 15.375] Entry deleted from font path.
[ 15.375] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 15.375] Entry deleted from font path.
[ 15.375] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 15.375] Entry deleted from font path.
[ 15.375] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 15.375] Entry deleted from font path.
[ 15.375] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 15.375] Entry deleted from font path.
[ 15.375] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 15.375] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 15.375] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 15.375] (II) Loader magic: 0x7f7267104c60
[ 15.375] (II) Module ABI versions:
[ 15.375] X.Org ANSI C Emulation: 0.4
[ 15.375] X.Org Video Driver: 19.0
[ 15.375] X.Org XInput driver : 21.0
[ 15.375] X.Org Server Extension : 9.0
[ 15.376] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 15.377] (--) PCI:*(0:1:0:0) 10de:0fc1:1462:8a92 rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 15.377] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[ 15.377] (II) "glx" will be loaded by default.
[ 15.377] (II) LoadModule: "glx"
[ 15.377] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 15.469] (II) Module glx: vendor="NVIDIA Corporation"
[ 15.469] compiled for 4.0.2, module version = 1.0.0
[ 15.469] Module class: X.Org Server Extension
[ 15.469] (II) NVIDIA GLX Module 304.125 Mon Dec 1 20:22:48 PST 2014
[ 15.469] (==) Matched nvidia as autoconfigured driver 0
[ 15.469] (==) Matched nouveau as autoconfigured driver 1
[ 15.469] (==) Matched nvidia as autoconfigured driver 2
[ 15.469] (==) Matched nouveau as autoconfigured driver 3
[ 15.469] (==) Matched modesetting as autoconfigured driver 4
[ 15.469] (==) Matched fbdev as autoconfigured driver 5
[ 15.469] (==) Matched vesa as autoconfigured driver 6
[ 15.469] (==) Assigned the driver to the xf86ConfigLayout
[ 15.469] (II) LoadModule: "nvidia"
[ 15.470] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 15.470] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 15.470] compiled for 4.0.2, module version = 1.0.0
[ 15.470] Module class: X.Org Video Driver
[ 15.470] (II) LoadModule: "nouveau"
[ 15.470] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 15.471] (II) Module nouveau: vendor="X.Org Foundation"
[ 15.471] compiled for 1.17.1, module version = 1.0.11
[ 15.471] Module class: X.Org Video Driver
[ 15.471] ABI class: X.Org Video Driver, version 19.0
[ 15.471] (II) LoadModule: "modesetting"
[ 15.471] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 15.472] (II) Module modesetting: vendor="X.Org Foundation"
[ 15.472] compiled for 1.17.1, module version = 1.17.1
[ 15.472] Module class: X.Org Video Driver
[ 15.472] ABI class: X.Org Video Driver, version 19.0
[ 15.472] (II) LoadModule: "fbdev"
[ 15.472] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 15.472] (II) Module fbdev: vendor="X.Org Foundation"
[ 15.472] compiled for 1.17.1, module version = 0.4.4
[ 15.472] Module class: X.Org Video Driver
[ 15.472] ABI class: X.Org Video Driver, version 19.0
[ 15.472] (II) LoadModule: "vesa"
[ 15.472] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 15.472] (II) Module vesa: vendor="X.Org Foundation"
[ 15.472] compiled for 1.17.1, module version = 2.3.3
[ 15.472] Module class: X.Org Video Driver
[ 15.472] ABI class: X.Org Video Driver, version 19.0
[ 15.472] (II) NVIDIA dlloader X Driver 304.125 Mon Dec 1 20:00:30 PST 2014
[ 15.472] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 15.472] (II) NOUVEAU driver Date: Thu Aug 28 03:57:48 2014 +0200
[ 15.472] (II) NOUVEAU driver for NVIDIA chipset families :
[ 15.472] RIVA TNT (NV04)
[ 15.472] RIVA TNT2 (NV05)
[ 15.472] GeForce 256 (NV10)
[ 15.472] GeForce 2 (NV11, NV15)
[ 15.472] GeForce 4MX (NV17, NV18)
[ 15.472] GeForce 3 (NV20)
[ 15.472] GeForce 4Ti (NV25, NV28)
[ 15.472] GeForce FX (NV3x)
[ 15.472] GeForce 6 (NV4x)
[ 15.472] GeForce 7 (G7x)
[ 15.472] GeForce 8 (G8x)
[ 15.472] GeForce GTX 200 (NVA0)
[ 15.472] GeForce GTX 400 (NVC0)
[ 15.472] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 15.472] (II) FBDEV: driver for framebuffer: fbdev
[ 15.472] (II) VESA: driver for VESA chipsets: vesa
[ 15.472] (++) using VT number 7
[ 15.473] (II) Loading sub module "fb"
[ 15.473] (II) LoadModule: "fb"
[ 15.473] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 15.473] (II) Module fb: vendor="X.Org Foundation"
[ 15.473] compiled for 1.17.1, module version = 1.0.0
[ 15.473] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.473] (II) Loading sub module "wfb"
[ 15.473] (II) LoadModule: "wfb"
[ 15.473] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 15.473] (II) Module wfb: vendor="X.Org Foundation"
[ 15.473] compiled for 1.17.1, module version = 1.0.0
[ 15.473] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.473] (II) Loading sub module "ramdac"
[ 15.473] (II) LoadModule: "ramdac"
[ 15.473] (II) Module "ramdac" already built-in
[ 15.473] (WW) Falling back to old probe method for modesetting
[ 15.473] (WW) Falling back to old probe method for fbdev
[ 15.473] (II) Loading sub module "fbdevhw"
[ 15.473] (II) LoadModule: "fbdevhw"
[ 15.473] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 15.473] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 15.473] compiled for 1.17.1, module version = 0.0.2
[ 15.473] ABI class: X.Org Video Driver, version 19.0
[ 15.473] (WW) Falling back to old probe method for vesa
[ 15.473] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 15.473] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 15.473] (==) NVIDIA(0): RGB weight 888
[ 15.473] (==) NVIDIA(0): Default visual is TrueColor
[ 15.473] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 15.473] (**) NVIDIA(0): Enabling 2D acceleration
[ 16.093] (II) NVIDIA(GPU-0): Display (Philips 247E4 (CRT-0)) does not support NVIDIA 3D
[ 16.093] (II) NVIDIA(GPU-0): Vision stereo.
[ 16.104] (II) NVIDIA(GPU-0): Display (OTM Optoma 1080P (DFP-1)) does not support NVIDIA 3D
[ 16.104] (II) NVIDIA(GPU-0): Vision stereo.
[ 16.106] (II) NVIDIA(0): NVIDIA GPU GeForce GT 640 (GK107) at PCI:1:0:0 (GPU-0)
[ 16.106] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 16.106] (--) NVIDIA(0): VideoBIOS: 80.07.26.00.3e
[ 16.106] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 16.106] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 16.107] (--) NVIDIA(0): Valid display device(s) on GeForce GT 640 at PCI:1:0:0
[ 16.107] (--) NVIDIA(0): Philips 247E4 (CRT-0) (connected)
[ 16.107] (--) NVIDIA(0): DFP-0
[ 16.107] (--) NVIDIA(0): OTM Optoma 1080P (DFP-1) (connected)
[ 16.107] (--) NVIDIA(0): DFP-2
[ 16.107] (--) NVIDIA(0): Philips 247E4 (CRT-0): 480.0 MHz maximum pixel clock
[ 16.107] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 16.107] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 16.107] (--) NVIDIA(0): OTM Optoma 1080P (DFP-1): 165.0 MHz maximum pixel clock
[ 16.107] (--) NVIDIA(0): OTM Optoma 1080P (DFP-1): Internal Single Link TMDS
[ 16.107] (--) NVIDIA(0): DFP-2: 330.0 MHz maximum pixel clock
[ 16.107] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[ 16.107] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 16.107] (**) NVIDIA(0): device Philips 247E4 (CRT-0) (Using EDID frequencies has
[ 16.107] (**) NVIDIA(0): been enabled on all display devices.)
[ 16.108] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 16.108] (**) NVIDIA(0): device OTM Optoma 1080P (DFP-1) (Using EDID frequencies
[ 16.108] (**) NVIDIA(0): has been enabled on all display devices.)
[ 16.111] (==) NVIDIA(0):
[ 16.111] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 16.111] (==) NVIDIA(0): will be used as the requested mode.
[ 16.111] (==) NVIDIA(0):
[ 16.111] (II) NVIDIA(0): Validated MetaModes:
[ 16.111] (II) NVIDIA(0): "CRT-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
[ 16.111] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080
[ 16.139] (--) NVIDIA(0): DPI set to (93, 94); computed from "UseEdidDpi" X config
[ 16.139] (--) NVIDIA(0): option
[ 16.139] (II) UnloadModule: "nouveau"
[ 16.139] (II) Unloading nouveau
[ 16.139] (II) UnloadModule: "modesetting"
[ 16.139] (II) Unloading modesetting
[ 16.139] (II) UnloadModule: "fbdev"
[ 16.139] (II) Unloading fbdev
[ 16.139] (II) UnloadSubModule: "fbdevhw"
[ 16.139] (II) Unloading fbdevhw
[ 16.139] (II) UnloadModule: "vesa"
[ 16.139] (II) Unloading vesa
[ 16.139] (--) Depth 24 pixmap format is 32 bpp
[ 16.139] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 16.139] (II) NVIDIA: access.
[ 16.142] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
[ 16.320] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 16.320] (==) NVIDIA(0): Backing store enabled
[ 16.320] (==) NVIDIA(0): Silken mouse enabled
[ 16.320] (==) NVIDIA(0): DPMS enabled
[ 16.321] (II) Loading sub module "dri2"
[ 16.321] (II) LoadModule: "dri2"
[ 16.321] (II) Module "dri2" already built-in
[ 16.321] (II) NVIDIA(0): [DRI2] Setup complete
[ 16.321] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 16.321] (--) RandR disabled
[ 16.325] (II) Initializing extension GLX
[ 16.325] (II) Indirect GLX disabled.(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 16.339] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 16.340] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.340] (II) LoadModule: "evdev"
[ 16.340] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.342] (II) Module evdev: vendor="X.Org Foundation"
[ 16.342] compiled for 1.17.1, module version = 2.9.0
[ 16.342] Module class: X.Org XInput Driver
[ 16.342] ABI class: X.Org XInput driver, version 21.0
[ 16.342] (II) Using input driver 'evdev' for 'Power Button'
[ 16.342] (**) Power Button: always reports core events
[ 16.342] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 16.342] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.342] (--) evdev: Power Button: Found keys
[ 16.342] (II) evdev: Power Button: Configuring as keyboard
[ 16.342] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 16.342] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.342] (**) Option "xkb_rules" "evdev"
[ 16.342] (**) Option "xkb_model" "pc105"
[ 16.342] (**) Option "xkb_layout" "fr"
[ 16.342] (**) Option "xkb_variant" "latin9"
[ 16.344] (II) XKB: reuse xkmfile /var/lib/xkb/server-816A055A5FF7D63897839A4BDEDC3908551E49DA.xkm
[ 16.345] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 16.345] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.345] (II) Using input driver 'evdev' for 'Power Button'
[ 16.345] (**) Power Button: always reports core events
[ 16.345] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 16.345] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.345] (--) evdev: Power Button: Found keys
[ 16.345] (II) evdev: Power Button: Configuring as keyboard
[ 16.345] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 16.345] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 16.345] (**) Option "xkb_rules" "evdev"
[ 16.345] (**) Option "xkb_model" "pc105"
[ 16.345] (**) Option "xkb_layout" "fr"
[ 16.345] (**) Option "xkb_variant" "latin9"
[ 16.346] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10)
[ 16.346] (II) No input driver specified, ignoring this device.
[ 16.346] (II) This device may have been added with another device file.
[ 16.346] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event11)
[ 16.346] (II) No input driver specified, ignoring this device.
[ 16.346] (II) This device may have been added with another device file.
[ 16.346] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
[ 16.346] (II) No input driver specified, ignoring this device.
[ 16.346] (II) This device may have been added with another device file.
[ 16.346] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event2)
[ 16.346] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[ 16.346] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[ 16.346] (**) USB USB Keykoard: always reports core events
[ 16.346] (**) evdev: USB USB Keykoard: Device: "/dev/input/event2"
[ 16.346] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x21
[ 16.346] (--) evdev: USB USB Keykoard: Found keys
[ 16.346] (II) evdev: USB USB Keykoard: Configuring as keyboard
[ 16.346] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/0003:1A2C:0021.0001/input/input5/event2"
[ 16.346] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 8)
[ 16.346] (**) Option "xkb_rules" "evdev"
[ 16.346] (**) Option "xkb_model" "pc105"
[ 16.346] (**) Option "xkb_layout" "fr"
[ 16.346] (**) Option "xkb_variant" "latin9"
[ 16.347] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event4)
[ 16.347] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[ 16.347] (II) Using input driver 'evdev' for 'USB USB Keykoard'
[ 16.347] (**) USB USB Keykoard: always reports core events
[ 16.347] (**) evdev: USB USB Keykoard: Device: "/dev/input/event4"
[ 16.347] (--) evdev: USB USB Keykoard: Vendor 0x1a2c Product 0x21
[ 16.347] (--) evdev: USB USB Keykoard: Found 1 mouse buttons
[ 16.347] (--) evdev: USB USB Keykoard: Found scroll wheel(s)
[ 16.347] (--) evdev: USB USB Keykoard: Found relative axes
[ 16.347] (II) evdev: USB USB Keykoard: Forcing relative x/y axes to exist.
[ 16.347] (--) evdev: USB USB Keykoard: Found absolute axes
[ 16.347] (II) evdev: USB USB Keykoard: Forcing absolute x/y axes to exist.
[ 16.347] (--) evdev: USB USB Keykoard: Found keys
[ 16.347] (II) evdev: USB USB Keykoard: Configuring as mouse
[ 16.347] (II) evdev: USB USB Keykoard: Configuring as keyboard
[ 16.347] (II) evdev: USB USB Keykoard: Adding scrollwheel support
[ 16.347] (**) evdev: USB USB Keykoard: YAxisMapping: buttons 4 and 5
[ 16.347] (**) evdev: USB USB Keykoard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.347] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/0003:1A2C:0021.0002/input/input7/event4"
[ 16.347] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD, id 9)
[ 16.347] (**) Option "xkb_rules" "evdev"
[ 16.347] (**) Option "xkb_model" "pc105"
[ 16.347] (**) Option "xkb_layout" "fr"
[ 16.347] (**) Option "xkb_variant" "latin9"
[ 16.347] (II) evdev: USB USB Keykoard: initialized for relative axes.
[ 16.347] (WW) evdev: USB USB Keykoard: ignoring absolute axes.
[ 16.348] (**) USB USB Keykoard: (accel) keeping acceleration scheme 1
[ 16.348] (**) USB USB Keykoard: (accel) acceleration profile 0
[ 16.348] (**) USB USB Keykoard: (accel) acceleration factor: 2.000
[ 16.348] (**) USB USB Keykoard: (accel) acceleration threshold: 4
[ 16.348] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event3)
[ 16.348] (**) PixArt USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 16.348] (II) Using input driver 'evdev' for 'PixArt USB Optical Mouse'
[ 16.348] (**) PixArt USB Optical Mouse: always reports core events
[ 16.348] (**) evdev: PixArt USB Optical Mouse: Device: "/dev/input/event3"
[ 16.404] (--) evdev: PixArt USB Optical Mouse: Vendor 0x93a Product 0x2510
[ 16.404] (--) evdev: PixArt USB Optical Mouse: Found 3 mouse buttons
[ 16.404] (--) evdev: PixArt USB Optical Mouse: Found scroll wheel(s)
[ 16.404] (--) evdev: PixArt USB Optical Mouse: Found relative axes
[ 16.404] (--) evdev: PixArt USB Optical Mouse: Found x and y relative axes
[ 16.404] (II) evdev: PixArt USB Optical Mouse: Configuring as mouse
[ 16.404] (II) evdev: PixArt USB Optical Mouse: Adding scrollwheel support
[ 16.404] (**) evdev: PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 16.404] (**) evdev: PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.404] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/0003:093A:2510.0003/input/input6/event3"
[ 16.404] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 10)
[ 16.404] (II) evdev: PixArt USB Optical Mouse: initialized for relative axes.
[ 16.404] (**) PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 16.404] (**) PixArt USB Optical Mouse: (accel) acceleration profile 0
[ 16.404] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[ 16.404] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[ 16.404] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse0)
[ 16.404] (II) No input driver specified, ignoring this device.
[ 16.404] (II) This device may have been added with another device file.
[ 16.405] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event7)
[ 16.405] (II) No input driver specified, ignoring this device.
[ 16.405] (II) This device may have been added with another device file.
[ 16.405] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event8)
[ 16.405] (II) No input driver specified, ignoring this device.
[ 16.405] (II) This device may have been added with another device file.
[ 16.405] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event9)
[ 16.405] (II) No input driver specified, ignoring this device.
[ 16.405] (II) This device may have been added with another device file.
[ 16.405] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event5)
[ 16.405] (II) No input driver specified, ignoring this device.
[ 16.405] (II) This device may have been added with another device file.
[ 16.405] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event6)
[ 16.405] (II) No input driver specified, ignoring this device.
[ 16.405] (II) This device may have been added with another device file.
[ 17.012] (II) NVIDIA(GPU-0): Display (Philips 247E4 (CRT-0)) does not support NVIDIA 3D
[ 17.012] (II) NVIDIA(GPU-0): Vision stereo.
[ 17.012] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17.012] (**) NVIDIA(0): device Philips 247E4 (CRT-0) (Using EDID frequencies has
[ 17.012] (**) NVIDIA(0): been enabled on all display devices.)
[ 17.044] (II) NVIDIA(GPU-0): Display (OTM Optoma 1080P (DFP-1)) does not support NVIDIA 3D
[ 17.044] (II) NVIDIA(GPU-0): Vision stereo.
[ 17.044] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17.044] (**) NVIDIA(0): device OTM Optoma 1080P (DFP-1) (Using EDID frequencies
[ 17.044] (**) NVIDIA(0): has been enabled on all display devices.)
[ 17.642] (II) NVIDIA(GPU-0): Display (Philips 247E4 (CRT-0)) does not support NVIDIA 3D
[ 17.642] (II) NVIDIA(GPU-0): Vision stereo.
[ 17.642] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17.642] (**) NVIDIA(0): device Philips 247E4 (CRT-0) (Using EDID frequencies has
[ 17.642] (**) NVIDIA(0): been enabled on all display devices.)
[ 17.665] (II) NVIDIA(GPU-0): Display (OTM Optoma 1080P (DFP-1)) does not support NVIDIA 3D
[ 17.665] (II) NVIDIA(GPU-0): Vision stereo.
[ 17.665] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17.665] (**) NVIDIA(0): device OTM Optoma 1080P (DFP-1) (Using EDID frequencies
[ 17.665] (**) NVIDIA(0): has been enabled on all display devices.)
[ 17.810] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 18.767] (II) NVIDIA(GPU-0): Display (Philips 247E4 (CRT-0)) does not support NVIDIA 3D
[ 18.767] (II) NVIDIA(GPU-0): Vision stereo.
[ 18.767] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18.767] (**) NVIDIA(0): device Philips 247E4 (CRT-0) (Using EDID frequencies has
[ 18.767] (**) NVIDIA(0): been enabled on all display devices.)
[ 18.779] (II) NVIDIA(GPU-0): Display (OTM Optoma 1080P (DFP-1)) does not support NVIDIA 3D
[ 18.779] (II) NVIDIA(GPU-0): Vision stereo.
[ 18.779] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18.779] (**) NVIDIA(0): device OTM Optoma 1080P (DFP-1) (Using EDID frequencies
[ 18.779] (**) NVIDIA(0): has been enabled on all display devices.)
[ 18.842] (II) XKB: reuse xkmfile /var/lib/xkb/server-FCE784E457E827DE63A60012DC8F25390069A73C.xkm
[ 18.881] (II) XKB: reuse xkmfile /var/lib/xkb/server-FCE784E457E827DE63A60012DC8F25390069A73C.xkm
[ 18.986] (II) NVIDIA(GPU-0): Display (Philips 247E4 (CRT-0)) does not support NVIDIA 3D
[ 18.986] (II) NVIDIA(GPU-0): Vision stereo.
[ 18.986] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18.986] (**) NVIDIA(0): device Philips 247E4 (CRT-0) (Using EDID frequencies has
[ 18.986] (**) NVIDIA(0): been enabled on all display devices.)
[ 19.001] (II) NVIDIA(GPU-0): Display (OTM Optoma 1080P (DFP-1)) does not support NVIDIA 3D
[ 19.001] (II) NVIDIA(GPU-0): Vision stereo.
[ 19.001] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 19.001] (**) NVIDIA(0): device OTM Optoma 1080P (DFP-1) (Using EDID frequencies
[ 19.001] (**) NVIDIA(0): has been enabled on all display devices.)
[ 20.101] (II) XKB: reuse xkmfile /var/lib/xkb/server-1BB3DE285E70FB9185F4D20DA8259C6A5B347C21.xkm
[ 34.299] (II) NVIDIA(GPU-0): Display (Philips 247E4 (CRT-0)) does not support NVIDIA 3D
[ 34.299] (II) NVIDIA(GPU-0): Vision stereo.
[ 34.299] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 34.299] (**) NVIDIA(0): device Philips 247E4 (CRT-0) (Using EDID frequencies has
[ 34.299] (**) NVIDIA(0): been enabled on all display devices.)
[ 34.311] (II) NVIDIA(GPU-0): Display (OTM Optoma 1080P (DFP-1)) does not support NVIDIA 3D
[ 34.311] (II) NVIDIA(GPU-0): Vision stereo.
[ 34.311] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 34.311] (**) NVIDIA(0): device OTM Optoma 1080P (DFP-1) (Using EDID frequencies
[ 34.311] (**) NVIDIA(0): has been enabled on all display devices.)
[ 34.333] (II) NVIDIA(GPU-0): Display (Philips 247E4 (CRT-0)) does not support NVIDIA 3D
[ 34.333] (II) NVIDIA(GPU-0): Vision stereo.
[ 34.333] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 34.333] (**) NVIDIA(0): device Philips 247E4 (CRT-0) (Using EDID frequencies has
[ 34.333] (**) NVIDIA(0): been enabled on all display devices.)
[ 34.345] (II) NVIDIA(GPU-0): Display (OTM Optoma 1080P (DFP-1)) does not support NVIDIA 3D
[ 34.345] (II) NVIDIA(GPU-0): Vision stereo.
[ 34.345] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 34.345] (**) NVIDIA(0): device OTM Optoma 1080P (DFP-1) (Using EDID frequencies
[ 34.345] (**) NVIDIA(0): has been enabled on all display devices.)
[ 64.765] (II) NVIDIA(GPU-0): Display (Philips 247E4 (CRT-0)) does not support NVIDIA 3D
[ 64.765] (II) NVIDIA(GPU-0): Vision stereo.
[ 64.765] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 64.765] (**) NVIDIA(0): device Philips 247E4 (CRT-0) (Using EDID frequencies has
[ 64.765] (**) NVIDIA(0): been enabled on all display devices.)
[ 64.777] (II) NVIDIA(GPU-0): Display (OTM Optoma 1080P (DFP-1)) does not support NVIDIA 3D
[ 64.777] (II) NVIDIA(GPU-0): Vision stereo.
[ 64.777] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 64.777] (**) NVIDIA(0): device OTM Optoma 1080P (DFP-1) (Using EDID frequencies
[ 64.777] (**) NVIDIA(0): has been enabled on all display devices.)Hors ligne
#2 Le 24/09/2015, à 18:20
- didli
Re : probleme NVIDIA GT640 et port HDMI
Salut !
Ca n'a peut-être aucuns rapports avec ton souci (encore que), il me semblait qu'il n'était pas raisonnable d'avoir le driver Nouveau et les pilotes proprétaires en même temps, ce qui a l'air d'être le cas sur ta config. A vérifier sur la doc.ubuntu.fr, mais il me semble que tu es censé désactiver le pilote libre (Mea Culpa si c'est déjà le cas, et que j'ai mal lu ton log.
Peux-tu lancer nvidia-settings en root ? Est-ce que ton proc a une CG intégrée (comme la plupart des core i7) ?
Plan B : réessayer le Plan A jusqu'à ce qu'il fonctionne.
http://www.mediaklan.com/
Hors ligne
#3 Le 24/09/2015, à 20:39
- superwanus
Re : probleme NVIDIA GT640 et port HDMI
salut!
Alors en ce qui concerne le pilote libre, je t'avoue que je ne sais pas... je dois faire quoi? le désactiver depuis le gestionnaire de pilotes?
en ce qui concerne nvidia-settings, je peux le lancer en mode root, pas de p.
et oui, mon proc a une cg intégrée, javais juste envie d'avoir une meilleur qualité et plus de fluidité, c'est pourquoi j'ai rajouté cette cg. Avec celle intégrée, ça fonctionnait nikel (et avec la version précédente d'ubuntu)...
Hors ligne
#4 Le 24/09/2015, à 20:57
- didli
Re : probleme NVIDIA GT640 et port HDMI
Si tu es passé par le gestionnaire de pilotes (continue, c'est mieux comme ça), alors à priori tu n'as rien à faire, c'est OK.
Dans les nvidia-settings, dans la section "X Server Display Configuration", as-tu mention de tes écrans connectés dans le layout ? Si ce n'est pas le cas, je suis dans ton cas (à vrai dire, même avec un seul écran, je n'ai pas de layout du tout). Je sais juste que c'est lié à la présence des 2 cartes graphiques et qu'il y a un paquet de gens avec ce souci. Tu peux p'être t'en sortir avec le Xinerama et les configs bi-écrans, mais là je te renvoie à nouveau sur la doc parce que j'ai un peu oublié tout ça. De même, à voir s'il n'y a pas une option dans ton bios pour désactiver purement et simplement la CG intégrée, et voir si cela arrange les choses dans ton cas.
Mais là, il faudra demander à des personnes plus compétentes que ma personne pour t'orienter ^^
Plan B : réessayer le Plan A jusqu'à ce qu'il fonctionne.
http://www.mediaklan.com/
Hors ligne
#5 Le 24/09/2015, à 21:08
- superwanus
Re : probleme NVIDIA GT640 et port HDMI
En fait pour installer le pilote j'ai suivi ce tuto: tuto install pilote CG .
Et oui, j'ai mes 2 écrans mentionnés... je vais voir cette histoire de xinérama, effectivement je retombe dessus fréquement, je voulais juste voir si c'était pas un petit paramètre à ajuster avant de me lancer dedans...
Hors ligne
#6 Le 29/09/2015, à 11:35
- superwanus
Re : probleme NVIDIA GT640 et port HDMI
bon je fais un petit up des fois que quelqu'un aurait une idée...
Hors ligne
#7 Le 06/12/2015, à 16:17
- superwanus
Re : probleme NVIDIA GT640 et port HDMI
Bonjour!
bon c'est encore moi. Mon videoprojecteur s'était mis à fonctionner miraculeusement, mais depuis ce matin, retour à la case départ. Hier j'ai fait les mises à jour, et mon vdeoproj ne recoit encore aucun signal. pu**** de m****!!!! j'y comprend rien de rien, je sais pas ce qui se passe à part que c'est hyper agacant! je vais plus mettre à jour mon ordi je pense.
bref c'est hyper flou, je sais pas quoi faire, si quelqu'un a une idee.
Hors ligne
#8 Le 06/12/2015, à 20:59
- didli
Re : probleme NVIDIA GT640 et port HDMI
Je te confirme qu'en ce qui me concerne j'ai effectivement résolu le souci en désactivant la CG intégrée dans le bios de mon thinkpad T530 (un portable donc). Ca veut dire aussi que je ne peux plus utiliser le switch entre la carte intel et ma CG Nvidia. Mon videoprojecteur fonctionne (pas de hdmi pour moi, c'est du DVI) sans rien ajouter au xorg.conf, juste avec les pilotes propriétaires, avec une config remise à zéro par la commande :
sudo nvidia-xconfigNote par contre que le vidéoprojecteur ne s'allume QUE lorsque je joue avec la section layout des settings NVidia (en clair, seulement quand je lui demande de m'afficher un second écran, d'étendre le bureau etc etc).
Tu pourrais nous poster ton xorg.conf stp ?
gedit /etc/X11/xorg.confPlan B : réessayer le Plan A jusqu'à ce qu'il fonctionne.
http://www.mediaklan.com/
Hors ligne
#9 Le 06/12/2015, à 22:07
- superwanus
Re : probleme NVIDIA GT640 et port HDMI
bon en fait je me suis arraché les cheveux tout l'aprem et j'ai réussi à modifier mon xorg.conf manuellement, c'est à dire que j'ai ajouté mon videoproj comme 2eme ecran.
donc tout va bien mais c'est juste que je ne comprends pas pourquoi les mises à jour ont réinitialisé mon xorg?
bref, je vais réfléchir à 2 fois avant de mettre à jour un systeme qui fonctionne nikel.
Hors ligne
#10 Le 07/12/2015, à 01:57
- didli
Re : probleme NVIDIA GT640 et port HDMI
Cela peut arriver, me-semble-t-il, lorsque l'on a justement 2 CG, et que le système peut switcher entre les 2 : dans certains cas un simple redémarrage suffit à faire perdre ce qu'on avait indiqué manuellement dans le xorg.conf (ex. : https://bugs.launchpad.net/ubuntu/+sour … g/1310489). Je ne sais pas par rapport à une MAJ, mais c'est peut-être un souci similaire.
Est-ce que tu as bumblebee ou nvidia-prime installé ?
Plan B : réessayer le Plan A jusqu'à ce qu'il fonctionne.
http://www.mediaklan.com/
Hors ligne
#11 Le 07/12/2015, à 09:29
- superwanus
Re : probleme NVIDIA GT640 et port HDMI
didli a écrit :
Est-ce que tu as bumblebee ou nvidia-prime installé ?
hmmm... bonne question. je ne crois pas. comment vérifier?
Hors ligne
#12 Le 07/12/2015, à 10:38
- didli
Re : probleme NVIDIA GT640 et port HDMI
Par synaptic, ou le software center ou :
dpkg -s bumblebeedpkg -s nvidia-primePlan B : réessayer le Plan A jusqu'à ce qu'il fonctionne.
http://www.mediaklan.com/
Hors ligne
#13 Le 07/12/2015, à 16:39
- superwanus
Re : probleme NVIDIA GT640 et port HDMI
ah oui tout bete...
donc non aucun des 2 n'est installé.
bon et sinon maintenant tout va bien... jusqu'à la prochaine fois!
Dernière modification par superwanus (Le 07/12/2015, à 16:41)
Hors ligne
#14 Le 07/12/2015, à 17:04
- didli
Re : probleme NVIDIA GT640 et port HDMI
Bien, ne les installe pas alors ^^. Je veux bien le retour de :
sudo lshwlspci -vvHistoire de connaître un peu mieux ta machine. Pense à faire un backup de ton xorg.conf tant qu'il fonctionne :
sudo cp /etc/X11/xorg.conf /etc/X11/xorg.bak ('suffira d'inverser les 2 noms de fichiers dans cette commande pour restaurer ton xorg.conf, même si je pense que tu connais déjà ça).
Je ne sais pas pour la doc fr Ubuntu, mais peut-être que le wiki officiel en anglais peut t'aider sur les config bi-écrans récentes. De même pour les wiki d'autres distributions (archlinux par exemple) en restant prudent toutefois avant d'éxécuter des commandes qui ne passeront peut-être pas sur Ubuntu...
Enfin, vérifie dans ton bios si tu as la possibilité d'utiliser (et choisir) la carte graphique principale (c'est pas toujours le cas).
Dans mon cas, cela apparaît dans ce genre-là : "Display : <choix 1> auto / <choix 2> discrete". En choisissant "discrete" (la carte Nvidia), je peux voir le nom et le layout de l'écran du portable dans les nvidia-settings (ce qui n'est pas le cas si je laisse en auto). Je n'ai pas vraiment essayé mais je suppose qu'avoir deux cartes graphiques actives quand on essaie de faire du bi-écran, c'est peut-être pas gagné - -'.
Plan B : réessayer le Plan A jusqu'à ce qu'il fonctionne.
http://www.mediaklan.com/
Hors ligne
#15 Le 07/12/2015, à 17:51
- superwanus
Re : probleme NVIDIA GT640 et port HDMI
sudo lshw :
configuration: boot=normal chassis=desktop family=To be filled by O.E.M. sku=To be filled by O.E.M. uuid=00000000-0000-0000-0000-D43D7EBF9B55
*-core
description: Carte mère
produit: FM2-A55M-E33 (MS-7721)
fabriquant: MSI
identifiant matériel: 0
version: 2.0
numéro de série: To be filled by O.E.M.
emplacement: To be filled by O.E.M.
*-firmware
description: BIOS
fabriquant: American Megatrends Inc.
identifiant matériel: 0
version: V11.1
date: 05/02/2013
taille: 64KiB
capacité: 8128KiB
fonctionnalités: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification uefi
*-cache:0
description: L1 cache
identifiant matériel: 23
emplacement: L1 CACHE
taille: 96KiB
capacité: 96KiB
horloge: 1GHz (1.0ns)
fonctionnalités: pipeline-burst internal write-back unified
*-cache:1
description: L2 cache
identifiant matériel: 24
emplacement: L2 CACHE
taille: 1MiB
capacité: 1MiB
horloge: 1GHz (1.0ns)
fonctionnalités: pipeline-burst internal write-back unified
*-memory
description: Mémoire Système
identifiant matériel: 32
emplacement: Carte mère
taille: 8GiB
*-bank:0
description: SODIMM DDR3 [vide]
produit: A1_PartNum0
fabriquant: A1_Manufacturer0
identifiant matériel: 0
numéro de série: A1_SerialNum0
emplacement: DIMM 0
bits: 64 bits
*-bank:1
description: DIMM DDR3 Synchrone 1333 MHz (0,8 ns)
produit: CMV4GX3M1A1333C9
identifiant matériel: 1
numéro de série: 00000000
emplacement: DIMM 1
taille: 4GiB
bits: 64 bits
horloge: 1333MHz (0.8ns)
*-bank:2
description: SODIMM DDR3 [vide]
produit: A1_PartNum2
fabriquant: A1_Manufacturer2
identifiant matériel: 2
numéro de série: A1_SerialNum2
emplacement: DIMM 0
bits: 64 bits
*-bank:3
description: DIMM DDR3 Synchrone 1333 MHz (0,8 ns)
produit: CMV4GX3M1A1333C9
identifiant matériel: 3
numéro de série: 00000000
emplacement: DIMM 1
taille: 4GiB
bits: 64 bits
horloge: 1333MHz (0.8ns)
*-cpu
description: CPU
produit: AMD A4-5300 APU with Radeon(tm) HD Graphics
fabriquant: Advanced Micro Devices [AMD]
identifiant matériel: 3e
information bus: cpu@0
version: AMD A4-5300 APU with Radeon(tm) HD Graphics
emplacement: P0
taille: 1400MHz
capacité: 3400MHz
bits: 64 bits
horloge: 100MHz
fonctionnalités: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core perfctr_nb arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold vmmcall bmi1 cpufreq
configuration: cores=2 enabledcores=2 threads=2
*-pci:0
description: Host bridge
produit: Family 15h (Models 10h-1fh) Processor Root Complex
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: 00
bits: 32 bits
horloge: 66MHz
*-generic NON-RÉCLAMÉ
description: IOMMU
produit: Family 15h (Models 10h-1fh) I/O Memory Management Unit
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 0.2
information bus: pci@0000:00:00.2
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: msi ht cap_list
configuration: latency=0
*-pci:0
description: PCI bridge
produit: Family 15h (Models 10h-1fh) Processor Root Port
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 2
information bus: pci@0000:00:02.0
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:18 portE/S:e000(taille=4096) mémoire:fd000000-fe0fffff portE/S:c0000000(taille=301989888)
*-display
description: VGA compatible controller
produit: GK107 [GeForce GT 640]
fabriquant: NVIDIA Corporation
identifiant matériel: 0
information bus: pci@0000:01:00.0
version: a1
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nvidia latency=0
ressources: irq:18 mémoire:fd000000-fdffffff mémoire:c0000000-cfffffff mémoire:d0000000-d1ffffff portE/S:e000(taille=128) mémoire:fe000000-fe07ffff
*-multimedia
description: Audio device
produit: GK107 HDMI Audio Controller
fabriquant: NVIDIA Corporation
identifiant matériel: 0.1
information bus: pci@0000:01:00.1
version: a1
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
ressources: irq:19 mémoire:fe080000-fe083fff
*-pci:1
description: PCI bridge
produit: Family 15h (Models 10h-1fh) Processor Root Port
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 4
information bus: pci@0000:00:04.0
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:16 portE/S:d000(taille=4096) portE/S:d2100000(taille=1048576)
*-network
description: Ethernet interface
produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
fabriquant: Realtek Semiconductor Co., Ltd.
identifiant matériel: 0
information bus: pci@0000:02:00.0
nom logique: eth0
version: 06
numéro de série: d4:3d:7e:bf:9b:55
taille: 100Mbit/s
capacité: 1Gbit/s
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.0.10 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
ressources: irq:33 portE/S:d000(taille=256) mémoire:d2104000-d2104fff mémoire:d2100000-d2103fff
*-storage
description: SATA controller
produit: FCH SATA Controller [AHCI mode]
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 11
information bus: pci@0000:00:11.0
version: 40
bits: 32 bits
horloge: 66MHz
fonctionnalités: storage msi ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=32
ressources: irq:25 portE/S:f040(taille=8) portE/S:f030(taille=4) portE/S:f020(taille=8) portE/S:f010(taille=4) portE/S:f000(taille=16) mémoire:fe10b000-fe10b7ff
*-usb:0
description: USB controller
produit: FCH USB OHCI Controller
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 12
information bus: pci@0000:00:12.0
version: 11
bits: 32 bits
horloge: 66MHz
fonctionnalités: ohci bus_master
configuration: driver=ohci-pci latency=32
ressources: irq:18 mémoire:fe10a000-fe10afff
*-usb:1
description: USB controller
produit: FCH USB EHCI Controller
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 12.2
information bus: pci@0000:00:12.2
version: 11
bits: 32 bits
horloge: 66MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=32
ressources: irq:17 mémoire:fe109000-fe1090ff
*-usb:2
description: USB controller
produit: FCH USB OHCI Controller
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 13
information bus: pci@0000:00:13.0
version: 11
bits: 32 bits
horloge: 66MHz
fonctionnalités: ohci bus_master
configuration: driver=ohci-pci latency=32
ressources: irq:18 mémoire:fe108000-fe108fff
*-usb:3
description: USB controller
produit: FCH USB EHCI Controller
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 13.2
information bus: pci@0000:00:13.2
version: 11
bits: 32 bits
horloge: 66MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=32
ressources: irq:17 mémoire:fe107000-fe1070ff
*-serial
description: SMBus
produit: FCH SMBus Controller
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 14
information bus: pci@0000:00:14.0
version: 14
bits: 32 bits
horloge: 66MHz
configuration: driver=piix4_smbus latency=0
ressources: irq:0
*-multimedia
description: Audio device
produit: FCH Azalia Controller
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 14.2
information bus: pci@0000:00:14.2
version: 01
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration: driver=snd_hda_intel latency=32
ressources: irq:16 mémoire:fe100000-fe103fff
*-isa
description: ISA bridge
produit: FCH LPC Bridge
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 14.3
information bus: pci@0000:00:14.3
version: 11
bits: 32 bits
horloge: 66MHz
fonctionnalités: isa bus_master
configuration: latency=0
*-pci:2
description: PCI bridge
produit: FCH PCI Bridge
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 14.4
information bus: pci@0000:00:14.4
version: 40
bits: 32 bits
horloge: 66MHz
fonctionnalités: pci subtractive_decode bus_master vga_palette
*-usb:4
description: USB controller
produit: FCH USB OHCI Controller
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 14.5
information bus: pci@0000:00:14.5
version: 11
bits: 32 bits
horloge: 66MHz
fonctionnalités: ohci bus_master
configuration: driver=ohci-pci latency=32
ressources: irq:18 mémoire:fe106000-fe106fff
*-usb:5
description: USB controller
produit: FCH USB OHCI Controller
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 16
information bus: pci@0000:00:16.0
version: 11
bits: 32 bits
horloge: 66MHz
fonctionnalités: ohci bus_master
configuration: driver=ohci-pci latency=32
ressources: irq:18 mémoire:fe105000-fe105fff
*-usb:6
description: USB controller
produit: FCH USB EHCI Controller
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 16.2
information bus: pci@0000:00:16.2
version: 11
bits: 32 bits
horloge: 66MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=32
ressources: irq:17 mémoire:fe104000-fe1040ff
*-pci:1
description: Host bridge
produit: Family 15h (Models 10h-1fh) Processor Function 0
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 101
information bus: pci@0000:00:18.0
version: 00
bits: 32 bits
horloge: 33MHz
*-pci:2
description: Host bridge
produit: Family 15h (Models 10h-1fh) Processor Function 1
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 102
information bus: pci@0000:00:18.1
version: 00
bits: 32 bits
horloge: 33MHz
*-pci:3
description: Host bridge
produit: Family 15h (Models 10h-1fh) Processor Function 2
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 103
information bus: pci@0000:00:18.2
version: 00
bits: 32 bits
horloge: 33MHz
*-pci:4
description: Host bridge
produit: Family 15h (Models 10h-1fh) Processor Function 3
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 104
information bus: pci@0000:00:18.3
version: 00
bits: 32 bits
horloge: 33MHz
configuration: driver=k10temp
ressources: irq:0
*-pci:5
description: Host bridge
produit: Family 15h (Models 10h-1fh) Processor Function 4
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 105
information bus: pci@0000:00:18.4
version: 00
bits: 32 bits
horloge: 33MHz
*-pci:6
description: Host bridge
produit: Family 15h (Models 10h-1fh) Processor Function 5
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 106
information bus: pci@0000:00:18.5
version: 00
bits: 32 bits
horloge: 33MHz
*-scsi:0
identifiant matériel: 1
nom logique: scsi1
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: SAMSUNG HD103UJ
identifiant matériel: 0.0.0
information bus: scsi@1:0.0.0
nom logique: /dev/sda
version: 1118
numéro de série: S13PJ90S725513
taille: 931GiB (1TB)
fonctionnalités: gpt-1.00 partitioned partitioned:gpt
configuration: ansiversion=5 guid=8bb44573-4467-41d2-8649-d94d456900dd sectorsize=512
*-volume
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 1
information bus: scsi@1:0.0.0,1
nom logique: /dev/sda1
nom logique: /media/evarwan/sauvegardes inte
version: 1.0
numéro de série: 1ea56a65-ce78-47aa-8b3a-ca58eee4dc3b
taille: 931GiB
capacité: 931GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration: created=2015-09-19 04:40:11 filesystem=ext4 label=sauvegardes inte lastmountpoint=/media/evarwan/sauvegardes inte modified=2015-12-07 07:58:19 mount.fstype=ext4 mount.options=rw,nosuid,nodev,relatime,data=ordered mounted=2015-12-07 07:58:19 state=mounted
*-scsi:1
identifiant matériel: 2
nom logique: scsi2
fonctionnalités: emulated
*-cdrom
description: DVD-RAM writer
produit: DVD A DH16A6L-C
fabriquant: ATAPI
identifiant matériel: 0.0.0
information bus: scsi@2:0.0.0
nom logique: /dev/cdrom
nom logique: /dev/sr0
version: ZHCG
fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=nodisc
*-scsi:2
identifiant matériel: 3
nom logique: scsi3
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: Samsung SSD 650
identifiant matériel: 0.0.0
information bus: scsi@3:0.0.0
nom logique: /dev/sdb
version: 1B0Q
numéro de série: S2DKNXAG702428B
taille: 111GiB (120GB)
fonctionnalités: gpt-1.00 partitioned partitioned:gpt
configuration: ansiversion=5 guid=04657551-3b14-4b98-8fc0-28ec71505724 sectorsize=512
*-volume:0
description: Windows FAT volume
fabriquant: mkfs.fat
identifiant matériel: 1
information bus: scsi@3:0.0.0,1
nom logique: /dev/sdb1
nom logique: /boot/efi
version: FAT32
numéro de série: a631-f278
taille: 510MiB
capacité: 511MiB
fonctionnalités: boot fat initialized
configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro state=mounted
*-volume:1
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 2
information bus: scsi@3:0.0.0,2
nom logique: /dev/sdb2
nom logique: /
version: 1.0
numéro de série: 447dcf98-2df1-4c27-9671-4f31a6785a1d
taille: 103GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration: created=2015-09-24 09:13:02 filesystem=ext4 lastmountpoint=/ modified=2015-12-07 07:57:43 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2015-12-07 07:57:43 state=mounted
*-volume:2
description: Linux swap volume
fabriquant: Linux
identifiant matériel: 3
information bus: scsi@3:0.0.0,3
nom logique: /dev/sdb3
version: 1
numéro de série: 2e9c5ed5-f51e-4ea4-8678-dc6a3d0f3133
taille: 8143MiB
capacité: 8144MiB
fonctionnalités: nofs swap initialized
configuration: filesystem=swap pagesize=4095
*-scsi:3
identifiant matériel: 4
information bus: usb@2:1
nom logique: scsi6
fonctionnalités: emulated scsi-host
configuration: driver=usb-storage
*-disk
description: SCSI Disk
identifiant matériel: 0.0.0
information bus: scsi@6:0.0.0
nom logique: /dev/sdc
configuration: sectorsize=512
evarwan@evarwan-fixe:~$ ^C
evarwan@evarwan-fixe:~$ et lspci -vv:
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex
Subsystem: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) I/O Memory Management Unit
Subsystem: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) I/O Memory Management Unit
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 24
Capabilities: <access denied>
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fd000000-fe0fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Prefetchable memory behind bridge: 00000000d2100000-00000000d21fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7721
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 32
Interrupt: pin A routed to IRQ 25
Region 0: I/O ports at f040 [size=8]
Region 1: I/O ports at f030 [size=4]
Region 2: I/O ports at f020 [size=8]
Region 3: I/O ports at f010 [size=4]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at fe10b000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7721
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe10a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7721
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe109000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7721
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe108000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7721
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe107000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7721
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device d721
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7721
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7721
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe106000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7721
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe105000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7721
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe104000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller: NVIDIA Corporation GK107 [GeForce GT 640] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 8a92
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at e000 [size=128]
[virtual] Expansion ROM at fe000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
01:00.1 Audio device: NVIDIA Corporation GK107 HDMI Audio Controller (rev a1)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 8a92
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7721
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 33
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at d2104000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d2100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169 et merci pour les conseils, je vais voir ça ...
Dernière modification par superwanus (Le 07/12/2015, à 17:55)
Hors ligne
#16 Le 07/12/2015, à 22:35
- Gregis95
Re : probleme NVIDIA GT640 et port HDMI
désolé mais je peux pas t'aider sur ce coup là, y a un ami à moi qui est tres pro pour ce genre de truc, je peux te donner son contact si tu veux
merci d'éviter de citer inutilement le message précédent, de plus ce genre de pratique n'est pas en adéquation avec le forum,
surtout que c'est votre unique message, ça ressemble plus à du phishing qu'autre chose.
Cordialement,
ljere
Dernière modification par ljere (Le 12/12/2015, à 11:39)
Hors ligne
#17 Le 08/12/2015, à 12:33
- superwanus
Re : probleme NVIDIA GT640 et port HDMI
et bien pourquoi pas. merci beaucoup d'avance!
voici mon adresse mail: [ Modéré - évite de donner ton adresse email en clair sur un forum ! ]
Dernière modification par cqfd93 (Le 08/12/2015, à 17:08)
Hors ligne