Pages : 1
#1 Le 02/10/2015, à 07:45
- kersaweol
zones dont l'allumage vacille
Bonjour,
Depuis peu j'ai des scintillements sur mon écran (ordi de bureau)... Je ne sais pas trop comment expliquer : par exemple, présentement en train d'écrire, j'ai le haut de page ubuntu dont l'allumage vacille / clignote... Il y a quelques minutes, c'était tout le côté gauche de cette même page qui clignotait...
Ce n'est pas lié à firefox car ça le fait avec tout (lecture photos etc) ;
Ce n'est pas un problème de carte graphique (NVidia GT610) ou d'écran puisque je viens d'essayer avec le DVD d'installation de la 14.04 et pas de problème...
C'est donc lié à ma 14.04 installée mais je ne sais que faire...
[ 19.243]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 19.243] X Protocol Version 11, Revision 0
[ 19.243] Build Operating System: Linux 3.2.0-75-generic i686 Ubuntu
[ 19.243] Current Operating System: Linux phil-bureau 3.13.0-65-generic #105-Ubuntu SMP Mon Sep 21 18:51:54 UTC 2015 i686
[ 19.243] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-65-generic root=UUID=250bf7ae-36fb-4013-9f98-cb1fab2c8981 ro quiet splash
[ 19.243] Build Date: 12 February 2015 02:49:46PM
[ 19.243] xorg-server 2:1.15.1-0ubuntu2.7 (For technical support please see http://www.ubuntu.com/support)
[ 19.243] Current version of pixman: 0.30.2
[ 19.243] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.243] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.244] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 4 08:25:03 2015
[ 19.264] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 19.273] (==) No Layout section. Using the first Screen section.
[ 19.273] (==) No screen section available. Using defaults.
[ 19.273] (**) |-->Screen "Default Screen Section" (0)
[ 19.273] (**) | |-->Monitor "<default monitor>"
[ 19.273] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 19.273] (==) Automatically adding devices
[ 19.273] (==) Automatically enabling devices
[ 19.273] (==) Automatically adding GPU devices
[ 19.273] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 19.273] Entry deleted from font path.
[ 19.273] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 19.273] Entry deleted from font path.
[ 19.273] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 19.273] Entry deleted from font path.
[ 19.274] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 19.274] Entry deleted from font path.
[ 19.274] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 19.274] Entry deleted from font path.
[ 19.274] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 19.274] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 19.274] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 19.274] (II) Loader magic: 0xb77a66c0
[ 19.274] (II) Module ABI versions:
[ 19.274] X.Org ANSI C Emulation: 0.4
[ 19.274] X.Org Video Driver: 15.0
[ 19.274] X.Org XInput driver : 20.0
[ 19.274] X.Org Server Extension : 8.0
[ 19.274] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 19.275] (--) PCI:*(0:1:0:0) 10de:104a:1043:840d rev 161, Mem @ 0xf4000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000b000/128, BIOS @ 0x????????/524288
[ 19.275] Initializing built-in extension Generic Event Extension
[ 19.275] Initializing built-in extension SHAPE
[ 19.276] Initializing built-in extension MIT-SHM
[ 19.276] Initializing built-in extension XInputExtension
[ 19.276] Initializing built-in extension XTEST
[ 19.276] Initializing built-in extension BIG-REQUESTS
[ 19.276] Initializing built-in extension SYNC
[ 19.276] Initializing built-in extension XKEYBOARD
[ 19.276] Initializing built-in extension XC-MISC
[ 19.276] Initializing built-in extension SECURITY
[ 19.276] Initializing built-in extension XINERAMA
[ 19.276] Initializing built-in extension XFIXES
[ 19.276] Initializing built-in extension RENDER
[ 19.276] Initializing built-in extension RANDR
[ 19.276] Initializing built-in extension COMPOSITE
[ 19.276] Initializing built-in extension DAMAGE
[ 19.276] Initializing built-in extension MIT-SCREEN-SAVER
[ 19.276] Initializing built-in extension DOUBLE-BUFFER
[ 19.276] Initializing built-in extension RECORD
[ 19.276] Initializing built-in extension DPMS
[ 19.276] Initializing built-in extension Present
[ 19.276] Initializing built-in extension DRI3
[ 19.276] Initializing built-in extension X-Resource
[ 19.276] Initializing built-in extension XVideo
[ 19.276] Initializing built-in extension XVideo-MotionCompensation
[ 19.276] Initializing built-in extension SELinux
[ 19.276] Initializing built-in extension XFree86-VidModeExtension
[ 19.276] Initializing built-in extension XFree86-DGA
[ 19.276] Initializing built-in extension XFree86-DRI
[ 19.276] Initializing built-in extension DRI2
[ 19.276] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[ 19.276] (II) "glx" will be loaded by default.
[ 19.276] (WW) "xmir" is not to be loaded by default. Skipping.
[ 19.276] (II) LoadModule: "glx"
[ 19.286] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/libglx.so
[ 19.324] (II) Module glx: vendor="NVIDIA Corporation"
[ 19.324] compiled for 4.0.2, module version = 1.0.0
[ 19.324] Module class: X.Org Server Extension
[ 19.324] (II) NVIDIA GLX Module 346.96 Sun Aug 23 21:54:48 PDT 2015
[ 19.325] Loading extension GLX
[ 19.325] (==) Matched nvidia as autoconfigured driver 0
[ 19.325] (==) Matched nouveau as autoconfigured driver 1
[ 19.325] (==) Matched nvidia as autoconfigured driver 2
[ 19.325] (==) Matched nouveau as autoconfigured driver 3
[ 19.325] (==) Matched modesetting as autoconfigured driver 4
[ 19.325] (==) Matched fbdev as autoconfigured driver 5
[ 19.325] (==) Matched vesa as autoconfigured driver 6
[ 19.325] (==) Assigned the driver to the xf86ConfigLayout
[ 19.325] (II) LoadModule: "nvidia"
[ 19.325] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 19.326] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 19.326] compiled for 4.0.2, module version = 1.0.0
[ 19.326] Module class: X.Org Video Driver
[ 19.326] (II) LoadModule: "nouveau"
[ 19.338] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 19.356] (II) Module nouveau: vendor="X.Org Foundation"
[ 19.356] compiled for 1.15.0, module version = 1.0.10
[ 19.356] Module class: X.Org Video Driver
[ 19.356] ABI class: X.Org Video Driver, version 15.0
[ 19.356] (II) LoadModule: "modesetting"
[ 19.357] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 19.357] (II) Module modesetting: vendor="X.Org Foundation"
[ 19.357] compiled for 1.15.0, module version = 0.8.1
[ 19.357] Module class: X.Org Video Driver
[ 19.357] ABI class: X.Org Video Driver, version 15.0
[ 19.357] (II) LoadModule: "fbdev"
[ 19.357] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 19.357] (II) Module fbdev: vendor="X.Org Foundation"
[ 19.357] compiled for 1.15.0, module version = 0.4.4
[ 19.357] Module class: X.Org Video Driver
[ 19.357] ABI class: X.Org Video Driver, version 15.0
[ 19.357] (II) LoadModule: "vesa"
[ 19.357] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 19.358] (II) Module vesa: vendor="X.Org Foundation"
[ 19.358] compiled for 1.15.0, module version = 2.3.3
[ 19.358] Module class: X.Org Video Driver
[ 19.358] ABI class: X.Org Video Driver, version 15.0
[ 19.358] (II) NVIDIA dlloader X Driver 346.96 Sun Aug 23 21:30:03 PDT 2015
[ 19.358] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 19.358] (II) NOUVEAU driver Date: Thu Nov 7 14:56:48 2013 +1000
[ 19.358] (II) NOUVEAU driver for NVIDIA chipset families :
[ 19.358] RIVA TNT (NV04)
[ 19.358] RIVA TNT2 (NV05)
[ 19.358] GeForce 256 (NV10)
[ 19.358] GeForce 2 (NV11, NV15)
[ 19.358] GeForce 4MX (NV17, NV18)
[ 19.358] GeForce 3 (NV20)
[ 19.358] GeForce 4Ti (NV25, NV28)
[ 19.358] GeForce FX (NV3x)
[ 19.358] GeForce 6 (NV4x)
[ 19.358] GeForce 7 (G7x)
[ 19.358] GeForce 8 (G8x)
[ 19.358] GeForce GTX 200 (NVA0)
[ 19.358] GeForce GTX 400 (NVC0)
[ 19.358] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 19.358] (II) FBDEV: driver for framebuffer: fbdev
[ 19.358] (II) VESA: driver for VESA chipsets: vesa
[ 19.358] (++) using VT number 7
[ 19.360] (II) Loading sub module "fb"
[ 19.360] (II) LoadModule: "fb"
[ 19.361] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 19.361] (II) Module fb: vendor="X.Org Foundation"
[ 19.361] compiled for 1.15.1, module version = 1.0.0
[ 19.361] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.361] (II) Loading sub module "wfb"
[ 19.361] (II) LoadModule: "wfb"
[ 19.361] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 19.361] (II) Module wfb: vendor="X.Org Foundation"
[ 19.361] compiled for 1.15.1, module version = 1.0.0
[ 19.361] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.361] (II) Loading sub module "ramdac"
[ 19.361] (II) LoadModule: "ramdac"
[ 19.361] (II) Module "ramdac" already built-in
[ 19.361] (WW) Falling back to old probe method for modesetting
[ 19.362] (WW) Falling back to old probe method for fbdev
[ 19.362] (II) Loading sub module "fbdevhw"
[ 19.362] (II) LoadModule: "fbdevhw"
[ 19.362] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 19.362] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 19.362] compiled for 1.15.1, module version = 0.0.2
[ 19.362] ABI class: X.Org Video Driver, version 15.0
[ 19.362] (EE) open /dev/fb0: No such file or directory
[ 19.362] (WW) Falling back to old probe method for vesa
[ 19.362] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 19.362] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 19.362] (==) NVIDIA(0): RGB weight 888
[ 19.362] (==) NVIDIA(0): Default visual is TrueColor
[ 19.362] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 19.362] (**) NVIDIA(0): Enabling 2D acceleration
[ 20.169] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 20.171] (II) NVIDIA(0): NVIDIA GPU GeForce GT 610 (GF119) at PCI:1:0:0 (GPU-0)
[ 20.171] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 20.171] (--) NVIDIA(0): VideoBIOS: 75.19.55.00.02
[ 20.171] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 20.180] (--) NVIDIA(0): Valid display device(s) on GeForce GT 610 at PCI:1:0:0
[ 20.180] (--) NVIDIA(0): CRT-0
[ 20.180] (--) NVIDIA(0): CRT-1
[ 20.180] (--) NVIDIA(0): Samsung SyncMaster (DFP-0) (boot, connected)
[ 20.180] (--) NVIDIA(0): DFP-1
[ 20.180] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 20.180] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[ 20.180] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal TMDS
[ 20.180] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[ 20.180] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 20.180] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 20.180] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 20.180] (**) NVIDIA(0): device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[ 20.180] (**) NVIDIA(0): has been enabled on all display devices.)
[ 20.181] (==) NVIDIA(0):
[ 20.181] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 20.181] (==) NVIDIA(0): will be used as the requested mode.
[ 20.181] (==) NVIDIA(0):
[ 20.181] (II) NVIDIA(0): Validated MetaModes:
[ 20.181] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 20.181] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 20.214] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 20.214] (--) NVIDIA(0): option
[ 20.214] (II) UnloadModule: "nouveau"
[ 20.214] (II) Unloading nouveau
[ 20.214] (II) UnloadModule: "modesetting"
[ 20.214] (II) Unloading modesetting
[ 20.214] (II) UnloadModule: "fbdev"
[ 20.214] (II) Unloading fbdev
[ 20.214] (II) UnloadSubModule: "fbdevhw"
[ 20.214] (II) Unloading fbdevhw
[ 20.214] (II) UnloadModule: "vesa"
[ 20.214] (II) Unloading vesa
[ 20.214] (--) Depth 24 pixmap format is 32 bpp
[ 20.214] (II) NVIDIA: Using 1024.00 MB of virtual memory for indirect memory
[ 20.214] (II) NVIDIA: access.
[ 20.225] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 20.289] Loading extension NV-GLX
[ 20.300] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 20.300] (==) NVIDIA(0): Backing store enabled
[ 20.300] (==) NVIDIA(0): Silken mouse enabled
[ 20.300] (==) NVIDIA(0): DPMS enabled
[ 20.300] Loading extension NV-CONTROL
[ 20.300] Loading extension XINERAMA
[ 20.300] (II) Loading sub module "dri2"
[ 20.300] (II) LoadModule: "dri2"
[ 20.300] (II) Module "dri2" already built-in
[ 20.300] (II) NVIDIA(0): [DRI2] Setup complete
[ 20.300] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 20.300] (--) RandR disabled
[ 20.312] (II) SELinux: Disabled on system
[ 20.313] (II) Initializing extension GLX
[ 20.355] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 20.364] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 20.364] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 20.364] (II) LoadModule: "evdev"
[ 20.364] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.379] (II) Module evdev: vendor="X.Org Foundation"
[ 20.379] compiled for 1.15.0, module version = 2.8.2
[ 20.379] Module class: X.Org XInput Driver
[ 20.379] ABI class: X.Org XInput driver, version 20.0
[ 20.380] (II) Using input driver 'evdev' for 'Power Button'
[ 20.380] (**) Power Button: always reports core events
[ 20.380] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 20.380] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 20.380] (--) evdev: Power Button: Found keys
[ 20.380] (II) evdev: Power Button: Configuring as keyboard
[ 20.380] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 20.380] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 20.380] (**) Option "xkb_rules" "evdev"
[ 20.380] (**) Option "xkb_model" "pc105"
[ 20.380] (**) Option "xkb_layout" "fr"
[ 20.380] (**) Option "xkb_variant" "latin9"
[ 20.382] (II) XKB: reuse xkmfile /var/lib/xkb/server-816A055A5FF7D63897839A4BDEDC3908551E49DA.xkm
[ 20.383] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 20.383] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 20.383] (II) Using input driver 'evdev' for 'Power Button'
[ 20.383] (**) Power Button: always reports core events
[ 20.383] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 20.383] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 20.383] (--) evdev: Power Button: Found keys
[ 20.383] (II) evdev: Power Button: Configuring as keyboard
[ 20.383] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 20.383] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 20.383] (**) Option "xkb_rules" "evdev"
[ 20.383] (**) Option "xkb_model" "pc105"
[ 20.383] (**) Option "xkb_layout" "fr"
[ 20.383] (**) Option "xkb_variant" "latin9"
[ 20.384] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 20.384] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 20.384] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)
[ 20.384] (II) No input driver specified, ignoring this device.
[ 20.384] (II) This device may have been added with another device file.
[ 20.398] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event12)
[ 20.398] (II) No input driver specified, ignoring this device.
[ 20.398] (II) This device may have been added with another device file.
[ 20.399] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event8)
[ 20.399] (II) No input driver specified, ignoring this device.
[ 20.399] (II) This device may have been added with another device file.
[ 20.399] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event7)
[ 20.399] (II) No input driver specified, ignoring this device.
[ 20.399] (II) This device may have been added with another device file.
[ 20.399] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event6)
[ 20.399] (II) No input driver specified, ignoring this device.
[ 20.399] (II) This device may have been added with another device file.
[ 20.400] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event5)
[ 20.400] (II) No input driver specified, ignoring this device.
[ 20.400] (II) This device may have been added with another device file.
[ 20.400] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event4)
[ 20.400] (II) No input driver specified, ignoring this device.
[ 20.400] (II) This device may have been added with another device file.
[ 20.400] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event11)
[ 20.400] (II) No input driver specified, ignoring this device.
[ 20.400] (II) This device may have been added with another device file.
[ 20.400] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event10)
[ 20.400] (II) No input driver specified, ignoring this device.
[ 20.400] (II) This device may have been added with another device file.
[ 20.401] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event9)
[ 20.401] (II) No input driver specified, ignoring this device.
[ 20.401] (II) This device may have been added with another device file.
[ 20.401] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 20.401] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 20.401] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 20.401] (**) Logitech USB Receiver: always reports core events
[ 20.401] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[ 20.401] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[ 20.401] (--) evdev: Logitech USB Receiver: Found keys
[ 20.401] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 20.401] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input5/event2"
[ 20.401] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 8)
[ 20.401] (**) Option "xkb_rules" "evdev"
[ 20.401] (**) Option "xkb_model" "pc105"
[ 20.401] (**) Option "xkb_layout" "fr"
[ 20.401] (**) Option "xkb_variant" "latin9"
[ 20.402] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[ 20.402] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 20.402] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 20.402] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 20.402] (**) Logitech USB Receiver: always reports core events
[ 20.402] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[ 20.402] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[ 20.402] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 20.402] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 20.402] (--) evdev: Logitech USB Receiver: Found relative axes
[ 20.402] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 20.402] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 20.402] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 20.402] (--) evdev: Logitech USB Receiver: Found keys
[ 20.402] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 20.402] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 20.402] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 20.402] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 20.402] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 20.402] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input6/event3"
[ 20.402] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 20.402] (**) Option "xkb_rules" "evdev"
[ 20.402] (**) Option "xkb_model" "pc105"
[ 20.402] (**) Option "xkb_layout" "fr"
[ 20.402] (**) Option "xkb_variant" "latin9"
[ 20.403] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 20.403] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 20.403] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 20.403] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 20.403] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 20.403] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 20.403] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 20.403] (II) No input driver specified, ignoring this device.
[ 20.403] (II) This device may have been added with another device file.
[ 23.051] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 23.051] (**) NVIDIA(0): device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[ 23.051] (**) NVIDIA(0): has been enabled on all display devices.)
[ 23.766] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 23.766] (**) NVIDIA(0): device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[ 23.766] (**) NVIDIA(0): has been enabled on all display devices.)
[ 33.890] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 33.890] (**) NVIDIA(0): device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[ 33.890] (**) NVIDIA(0): has been enabled on all display devices.)
[ 35.225] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 35.942] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 35.942] (**) NVIDIA(0): device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[ 35.942] (**) NVIDIA(0): has been enabled on all display devices.)
[ 36.125] (II) XKB: reuse xkmfile /var/lib/xkb/server-79DA8A0BAEB4CF1B2497C5C301111BA2CA0B8D85.xkm
[ 36.248] (II) XKB: reuse xkmfile /var/lib/xkb/server-79DA8A0BAEB4CF1B2497C5C301111BA2CA0B8D85.xkm
[ 37.295] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 37.295] (**) NVIDIA(0): device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[ 37.295] (**) NVIDIA(0): has been enabled on all display devices.)
[ 38.382] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 38.382] (**) NVIDIA(0): device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[ 38.382] (**) NVIDIA(0): has been enabled on all display devices.)
[ 50.576] (II) XKB: reuse xkmfile /var/lib/xkb/server-1580E94F9C282AE2A0B7C28D11147BD2670E600F.xkm
[ 54.717] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 54.717] (**) NVIDIA(0): device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[ 54.717] (**) NVIDIA(0): has been enabled on all display devices.)Merci par avance.
Dernière modification par kersaweol (Le 04/10/2015, à 08:54)
Hors ligne
Pages : 1