Pages : 1
#1 Le 04/10/2015, à 22:15
- Ubufab
Probleme installation Ubuntu 14.04.3
Bonsoir
J'ai pc msi avec auparavant win8, j'ai installé une clé boot Ubu pour un live USB et ensuite a decidé aujourdhui d'installer a partir du live USB Ubuntu 14.04.3.
J'ai essayé plusieurs fois de faire des boot-repair mais apres avoir des reparations, je réessaye d'installer et la meme erreur arrive:
"le paquet grub-efi n'a pas été installé dans /target/"
La fin d'installation prends fin et me met dans la panade car jai décidé de tourner le dos completement à windows pour rejoindre la communauté linuxienne en formatant mon pc.
Et à cause de ce petit bug je n'ai plus de OS ^^'
Voilà j'hespere que la communauté est aussi aimable que je l'ai deja vu sur les post du meme type que moi, aussi aimable comme je le pensais de base et aussi aimable qu'on m'a dit.
Je vous laisse mon rapport j'hespere vivement une reponse qui m'aidera
ps:je suis debutant sur ce OS
ps²: pas compris à quoi ça sers Ubuntu Pastebin je croyais pouvoir envoyer mon message au forum depuis.
Ahah #Noob
http://paste.ubuntu.com/12684486/plain/
http://paste.ubuntu.com/12684486/
Hors ligne
#2 Le 04/10/2015, à 22:57
- Babdu89
Re : Probleme installation Ubuntu 14.04.3
Bonjour.
Essaye de réinstaller en UEFI. En utilisant l'option installer sur tout le disque, mais sans chiffrement et sans utiliser LVM.
Une installation standard en fait.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#3 Le 05/10/2015, à 08:11
- malbo
Re : Probleme installation Ubuntu 14.04.3
Essaye de réinstaller en UEFI. En utilisant l'option installer sur tout le disque, mais sans chiffrement et sans utiliser LVM.
C'est exactement ce qu'il faut faire. Il ne faudra PAS cocher la case "Chiffrer la nouvelle installation de Ubuntu pour la sécurité" et il ne faudra PAS cocher la case "Utiliser LVM pour la nouvelle installation de Ubuntu"
D'autre part, pourrais-tu donner le nom COMPLET du modèle de ton ordi MSI ?
Dernière modification par malbo (Le 05/10/2015, à 08:16)
Hors ligne
#4 Le 07/10/2015, à 14:36
- Ubufab
Re : Probleme installation Ubuntu 14.04.3
Bonjour c'est un msi CR61
Merci pour ces reponses, jai réessayé et ça ne fonctionne toujours pas alors jai decidé de le refaire encore une fois comme vous avez dit mais en fesant une reparation avec laide de boot repair et il marrive un nouveau probleme, boot repair me dit :
"GPT detected. Please create a BIOS-Boot partition (>1MB, unformatted filesystem, bios_grub flag). This can be performed via tools such as Gparted. Then try again."
Donc jai utilisé Gparted pour creer une nouvelle partition ou pour formater mon fat32 mais au final je suis bloqué, je ne sais pas trop quoi faire, jai suivi sur un post que cette config de partition etait assez bonne:
dev/sda1 fat32 94MiB
/dev/sda2 linux-swap 9.41 GiB swap
/dev/sda3 ext 4 18.63 GiB partition /
/dev/sda4 ext 4 810.25 GiB partition /home
/dev/sda5 ext 4 93.13 GiB partition /temp
Hors moi jai ça:
/dev/sda1 fat32 512MiB
/dev/sda2 ext4 293.70 GiB
/dev/sda3 linux-swap 3.89 GiB
jai tanté de refaire des partitions tout en calculant la memoire mais je n'arrive pas a creer d'autres partitions et au final je ne sais pas si ça sera la solution a mon probleme..
En gros mon Pb: Toujours le meme message d'erreur à linstallation alors que jai fait installation standard, (sans chiffrement, ni LVM)
Et mon repair boot qui me dit de faire de nouvelles partitions alors qu'il ne ma jamais fait ça avant.
Help pls..... :'(
Hors ligne
#5 Le 07/10/2015, à 16:24
- malbo
Re : Probleme installation Ubuntu 14.04.3
Actuellement, ton "Bios" est configuré pour autoriser le fonctionnement en mode EFI. Ce serait utile que tu modifies le Boot Mode pour le passer sur "Legacy", ce qui signifie que seul le fonctionnement en mode Bios (le mode classique) sera autorisé. Après cela, tu pourras faire une installation en choisissant d'installer Ubuntu sur tout le disque (ça doit être le choix "Effacer le disque et installer Ubuntu")
Dernière modification par malbo (Le 07/10/2015, à 16:25)
Hors ligne
#6 Le 07/10/2015, à 16:34
- Babdu89
Re : Probleme installation Ubuntu 14.04.3
Bonjour.
@malbo.
Pour le hdd...Ne serait il pas utile de faire une table de partition de type MSDOS , il est actuellement en GPT. ?.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#7 Le 07/10/2015, à 16:43
- malbo
Re : Probleme installation Ubuntu 14.04.3
@Babdu89 : j'ai fait la vérification dans cette discussion : http://forum.ubuntu-fr.org/viewtopic.php?id=1766391
Tu peux y lire ma prose :
Il y a donc eu création automatique d'une nouvelle table de partition MSDOS (au lieu de GPT précédemment), le partitionnement a été fait automatiquement conformément au choix que j'ai fait à l'étape 3 puisque j'ai choisi une installation automatique
Hors ligne
#8 Le 07/10/2015, à 17:01
- Babdu89
Re : Probleme installation Ubuntu 14.04.3
Merci de me rafraîchir la mémoire...
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#9 Le 12/10/2015, à 14:46
- Ubufab
Re : Probleme installation Ubuntu 14.04.3
Merci beaucoup problème résolu, le seul problème c'est que maintenant mon disque dur n'est plus reconnu;
Sur ma barre et dans mon explorateur de fichier, il n'y a que ma clé usb qui est reconnue ^^'
Hors ligne
#10 Le 12/10/2015, à 15:25
- malbo
Re : Probleme installation Ubuntu 14.04.3
Je crois comprendre que tu as réussi l'installation de Ubuntu, aussi je te prie de démarrer une session sur ce Ubuntu installé et depuis cette session, de faire un Boot-Info. Tu donneras l'URL de ce Boot-Info dans ta réponse.
Hors ligne
#11 Le 12/10/2015, à 16:07
- Ubufab
Re : Probleme installation Ubuntu 14.04.3
Merci beaucoup d'etre aussi gentil pour m'aider cest vraiment très sympa ^^'
http://paste.ubuntu.com/12763780/
Hors ligne
#12 Le 12/10/2015, à 17:01
- Babdu89
Re : Probleme installation Ubuntu 14.04.3
Bonsoir.
Rhaaa!...
Réinstallation faite encore avec chiffrement et utilisation de LVM...
Extrais du nouveau boot info.
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/mapper/sda5_crypt zScLSm-ddwP-jn55-DBo3-0ijd-3sJm-Db7XuU LVM2_member
/dev/mapper/ubuntu--vg-root 9af3d2ec-10d6-45bd-a369-2dad7cf72aa2 ext4
/dev/mapper/ubuntu--vg-swap_1 ed4a2f9b-b5c1-4638-98b0-9798e751514d swap
/dev/sda1 1b821c94-c833-41b2-81de-33d4c2b2ea87 ext2
/dev/sda5 bce91c14-364a-49b8-8257-a5e2633b8c3f crypto_LUKS
/dev/sdb1 DC41-5DBE vfat LEXAR
@+. Babdu89 .
Dernière modification par Babdu89 (Le 12/10/2015, à 20:22)
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#13 Le 12/10/2015, à 20:09
- Ubufab
Re : Probleme installation Ubuntu 14.04.3
Bonsoir Bab
" Je me suis dit merde jai pas fait ça quand même!? "
Pris d'un doute avec l'extrait que je ne comprends pas, je remet dans mon bios usb en first et recommence une démo d'Ubuntu et ensuite réinstalle en fessant bien attention de ne pas cocher ni chiffrage ni LVM installe redemarre et me remet mon bios comme il etait programmé de base et remet le boot mod en Legacy comme disais Malbo et démarre Ubu
Le disque dur n'est toujours pas reconnu dans le perif
Hors ligne
#14 Le 12/10/2015, à 20:40
- malbo
Re : Probleme installation Ubuntu 14.04.3
Ton dernier Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub.
=> Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.03 2010-10-22 ........>..sr>.......S..:...0...~.....~...f...M.f.f....f..0~....>E}.u......
Boot sector info: Syslinux looks at sector 403456 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg /casper/vmlinuz.efi
/EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 616,988,671 616,986,624 83 Linux
/dev/sda2 616,990,718 625,141,759 8,151,042 5 Extended
/dev/sda5 616,990,720 625,141,759 8,151,040 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 2004 MB, 2004877312 bytes
129 heads, 32 sectors/track, 948 cylinders, total 3915776 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 32 3,915,775 3,915,744 b W95 FAT32
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65 ext4
/dev/sda5 7b15145a-01c5-426f-a3ab-471a9ed80626 swap
/dev/sdb1 DC41-5DBE vfat LEXAR
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Oct 12 20:54 ata-PIONEER_DVD-RW_DVRTD11RS_SLC3622513 -> ../../sr0
lrwxrwxrwx 1 root root 9 Oct 12 21:07 ata-WDC_WD3200BPVT-22JJ5T0_WD-WXF1EC1AMZAD -> ../../sda
lrwxrwxrwx 1 root root 10 Oct 12 20:54 ata-WDC_WD3200BPVT-22JJ5T0_WD-WXF1EC1AMZAD-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Oct 12 20:54 ata-WDC_WD3200BPVT-22JJ5T0_WD-WXF1EC1AMZAD-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Oct 12 20:54 ata-WDC_WD3200BPVT-22JJ5T0_WD-WXF1EC1AMZAD-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 Oct 12 21:07 usb-Lexar_USB_Flash_Drive_8UIXCQZ4G2OG205H407M-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Oct 12 20:54 usb-Lexar_USB_Flash_Drive_8UIXCQZ4G2OG205H407M-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Oct 12 21:07 wwn-0x50014ee602a72462 -> ../../sda
lrwxrwxrwx 1 root root 10 Oct 12 20:54 wwn-0x50014ee602a72462-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Oct 12 20:54 wwn-0x50014ee602a72462-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Oct 12 20:54 wwn-0x50014ee602a72462-part5 -> ../../sda5
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,errors=remount-ro)
/dev/sdb1 /media/ubulaupc/LEXAR vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65
else
search --no-floppy --fs-uuid --set=root 23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65
else
search --no-floppy --fs-uuid --set=root 23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65
fi
linux /boot/vmlinuz-3.19.0-25-generic root=UUID=23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.19.0-25-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65' {
menuentry 'Ubuntu, avec Linux 3.19.0-25-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-25-generic-advanced-23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65
else
search --no-floppy --fs-uuid --set=root 23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65
fi
echo 'Chargement de Linux 3.19.0-25-generic…'
linux /boot/vmlinuz-3.19.0-25-generic root=UUID=23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.19.0-25-generic
}
menuentry 'Ubuntu, with Linux 3.19.0-25-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-25-generic-recovery-23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65
else
search --no-floppy --fs-uuid --set=root 23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65
fi
echo 'Chargement de Linux 3.19.0-25-generic…'
linux /boot/vmlinuz-3.19.0-25-generic root=UUID=23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.19.0-25-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65
else
search --no-floppy --fs-uuid --set=root 23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65
else
search --no-floppy --fs-uuid --set=root 23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=7b15145a-01c5-426f-a3ab-471a9ed80626 none swap sw 0 0
--------------------------------------------------------------------------------
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
============================== sdb1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit
label ubnentry1
menu label ^Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
label ubnentry2
menu label ^Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
label ubnentry3
menu label ^Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --
label ubnentry4
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit
label ubnentry5
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit
label ubnentry6
menu label Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
label ubnentry7
menu label Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
label ubnentry8
menu label OEM install (for manufacturers)
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
label ubnentry9
menu label Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --
--------------------------------------------------------------------------------
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
menu.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda2
00000000 31 38 8e 48 f5 8a 8c 7c cd 4a 46 23 c3 45 9b ca |18.H...|.JF#.E..|
00000010 8a f3 77 d1 75 a3 d4 79 be de 92 e2 a0 f0 c3 1f |..w.u..y........|
00000020 34 f1 a1 e7 e7 4e 5c 1f 6d 4d 36 8d b9 9b 3c f6 |4....N\.mM6...<.|
00000030 7c 6c 74 fd 07 66 60 cd 04 99 00 ff 1c 32 9b 03 ||lt..f`......2..|
00000040 16 53 e3 24 5b 9a d4 f4 60 f0 a2 37 ce 47 77 8b |.S.$[...`..7.Gw.|
00000050 80 86 d0 f3 c7 8f 4e 15 7c d7 d1 45 62 cf 19 b4 |......N.|..Eb...|
00000060 38 f8 94 f4 3b 16 8c 50 98 b5 69 d4 4c ab e8 df |8...;..P..i.L...|
00000070 d3 0d a9 4e 63 e0 44 dd d6 9f d9 08 b1 cb 53 81 |...Nc.D.......S.|
00000080 8c b4 ce a1 ad 20 c1 b5 4a 78 4c c2 90 d3 79 d5 |..... ..JxL...y.|
00000090 7c 37 42 29 91 4d 27 54 a3 86 76 53 81 da c6 c7 ||7B).M'T..vS....|
000000a0 8b be 5f 69 db 1d 3b 43 ff 17 43 b1 ee 03 4b 93 |.._i..;C..C...K.|
000000b0 a1 e6 95 1e 58 83 26 d3 b0 60 93 33 49 1f de ea |....X.&..`.3I...|
000000c0 83 80 41 2c b9 ce ae e3 d8 eb 75 c6 4d 10 44 0b |..A,......u.M.D.|
000000d0 20 0a 48 36 46 4a 12 18 14 ac b1 ea 73 77 6a dc | .H6FJ......swj.|
000000e0 44 9d 75 25 2a 5c ca ec a9 d6 9e 79 98 37 a0 42 |D.u%*\.....y.7.B|
000000f0 c6 60 77 bb 35 a9 8f cd 8b 4e f7 be f3 15 6c 9c |.`w.5....N....l.|
00000100 9f 7d 50 1d a7 80 ad 8d b8 81 d3 b5 2c 6c b6 4d |.}P.........,l.M|
00000110 6f 5f 77 cb 5d 33 2e fa 97 de de ab 23 1d d5 c7 |o_w.]3......#...|
00000120 59 f2 1a 5e a8 89 72 bd 1b a0 b6 ee 85 62 da de |Y..^..r......b..|
00000130 f6 f0 f7 07 45 0c f0 fb c1 21 17 e6 90 2b c7 5e |....E....!...+.^|
00000140 7f ff 6d bc 14 93 37 03 a1 12 5d e7 f6 79 93 14 |..m...7...]..y..|
00000150 c4 48 b0 b6 16 65 28 79 39 50 fd 0d ad b3 48 06 |.H...e(y9P....H.|
00000160 ca 53 32 6e fa 0c 27 95 38 31 00 e6 ed 98 8a 50 |.S2n..'.81.....P|
00000170 b8 7d ac fe d0 4a 6b 1d 2f 14 8f fd f1 82 e0 14 |.}...Jk./.......|
00000180 4a 13 70 3a 73 ae 76 3d a0 fe 96 5f 14 dd f6 83 |J.p:s.v=..._....|
00000190 4c 16 00 61 09 30 16 a6 02 34 38 d3 94 0d d2 5c |L..a.0...48....\|
000001a0 40 3c e1 16 9e 06 50 23 a3 dd 17 cf 7f 97 37 90 |@<....P#......7.|
000001b0 0e 38 46 9b 71 10 e0 b2 51 76 40 29 1f 06 00 fe |.8F.q...Qv@)....|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 60 7c 00 00 00 |...........`|...|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
cat: write error: Broken pipe
ADDITIONAL INFORMATION :
=================== log of boot-info 2015-10-12__21h07 ===================
boot-info version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-info is executed in installed-session (Ubuntu 14.04.3 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.19.0-25-generic root=UUID=23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65 ro quiet splash vt.handoff=7
=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 14.04.3 LTS CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65" TYPE="ext4"
/dev/sda5: UUID="7b15145a-01c5-426f-a3ab-471a9ed80626" TYPE="swap"
/dev/sdb1: LABEL="LEXAR" UUID="DC41-5DBE" TYPE="vfat"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Avertissement : la partition étendue ne commence pas sur une frontière de
cylindres. DOS et Linux interpréteront les contenus différemment.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 août 5 07:20 grub.d
total 76
-rwxr-xr-x 1 root root 9424 juin 26 13:16 00_header
-rwxr-xr-x 1 root root 6058 mai 13 16:51 05_debian_theme
-rwxr-xr-x 1 root root 11608 juin 26 13:16 10_linux
-rwxr-xr-x 1 root root 10412 juin 26 13:16 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 juin 26 13:16 30_os-prober
-rwxr-xr-x 1 root root 1416 juin 26 13:16 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juin 26 13:16 40_custom
-rwxr-xr-x 1 root root 216 juin 26 13:16 41_custom
-rw-r--r-- 1 root root 483 juin 26 13:16 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== No kernel in /media/ubulaupc/LEXAR/boot:
grub
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, .
sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-kernel, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /media/ubulaupc/LEXAR.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, liveusb, no-os, 32 sectors * 512 bytes
=================== parted -l:
Model: ATA WDC WD3200BPVT-2 (scsi)
Disk /dev/sda: 320GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 316GB 316GB primary ext4 boot
2 316GB 320GB 4173MB extended
5 316GB 320GB 4173MB logical linux-swap(v1)
Model: Lexar USB Flash Drive (scsi)
Disk /dev/sdb: 2005MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 16.4kB 2005MB 2005MB primary fat32 boot
=================== parted -lm:
BYT;
/dev/sda:320GB:scsi:512:4096:msdos:ATA WDC WD3200BPVT-2;
1:1049kB:316GB:316GB:ext4::boot;
2:316GB:320GB:4173MB:::;
5:316GB:320GB:4173MB:linux-swap(v1)::;
BYT;
/dev/sdb:2005MB:scsi:512:512:msdos:Lexar USB Flash Drive;
1:16.4kB:2005MB:2005MB:fat32::boot;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 298,1G WDC WD3200BP
sda1 part ext4 294,2G 23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65
sda2 part 1K
sda5 part swap 3,9G 7b15145a-01c5-426f-a3ab-471a9ed80626
sdb disk 1,9G USB Flash Dr
sdb1 part vfat 1,9G LEXAR DC41-5DBE
sr0 rom 1024M DVD-RW DVRTD
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /
sda2 1 0 0
sda5 1 0 0 [SWAP]
sdb 1 0 1 running
sdb1 1 0 1 /media/ubulaupc/LEXAR
sr0 1 0 1 running
=================== mount:
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubulaupc)
/dev/sdb1 on /media/ubulaupc/LEXAR type vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hpet i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 input kmsg log mapper mcelog mei0 mem memory_bandwidth net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
ls: impossible d'accéder à : Aucun fichier ou dossier de ce type
ls sdb1/efi: /BOOT/grubx64.efi /BOOT/BOOTx64.EFI
ls sdb1: autorun.inf
boot
casper
dists
EFI
install
isolinux
ldlinux.sys
md5sum.txt
menu.c32
pics
pool
preseed
README.diskdefines
syslinux.cfg
ubnfilel.txt
ubninit
ubnkern
ubnpathl.txt
wubi.exe . Veuillez indiquer ce message à boot.repair@gmail.com
ls: impossible d'accéder à /boot/efi/efi: Aucun fichier ou dossier de ce type
ls /boot/efi/efi :
Error efitmp. Veuillez indiquer ce message à boot.repair@gmail.com
=================== hexdump -n512 -C /dev/sdb1
00000000 eb 58 90 53 59 53 4c 49 4e 55 58 00 02 08 30 02 |.X.SYSLINUX...0.|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 20 00 00 00 |........?... ...|
00000020 e0 bf 3b 00 e8 0e 00 00 00 00 00 00 02 00 00 00 |..;.............|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 be 5d 41 dc 4e 4f 20 4e 41 4d 45 20 20 |..).]A.NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 fa fc 31 c9 8e d1 | FAT32 ..1...|
00000060 bc 76 7b 52 06 57 1e 56 8e c1 b1 26 bf 78 7b f3 |.v{R.W.V...&.x{.|
00000070 a5 8e d9 bb 78 00 0f b4 37 0f a0 56 20 d2 78 1b |....x...7..V .x.|
00000080 31 c0 b1 06 89 3f 89 47 02 f3 64 a5 8a 0e 18 7c |1....?.G..d....||
00000090 88 4d bc 50 50 50 50 cd 13 eb 5c 8b 55 aa 8b 75 |.M.PPPP....U..u|
000000a0 a8 c1 ee 04 01 f2 81 fa b7 07 73 2b f6 45 b4 7f |..........s+.E..|
000000b0 75 25 38 4d b8 74 20 66 3d 21 47 50 54 75 10 80 |u%8M.t f=!GPTu..|
000000c0 7d b8 ed 75 0a 66 ff 75 ec 66 ff 75 e8 eb 0f 51 |}..u.f.u.f.u...Q|
000000d0 51 66 ff 75 bc eb 07 51 51 66 ff 36 1c 7c b4 08 |Qf.u...QQf.6.|..|
000000e0 cd 13 72 13 20 e4 75 0f c1 ea 08 42 89 16 1a 7c |..r. .u....B...||
000000f0 83 e1 3f 89 0e 18 7c fb bb aa 55 b4 41 8a 16 74 |..?...|...U.A..t|
00000100 7b cd 13 72 10 81 fb 55 aa 75 0a f6 c1 01 74 05 |{..r...U.u....t.|
00000110 c6 06 45 7d 00 66 b8 00 28 06 00 66 ba 00 00 00 |..E}.f..(..f....|
00000120 00 bb 00 7e e8 10 00 66 81 3e 24 7e d4 ff 73 72 |...~...f.>$~..sr|
00000130 75 76 ea 38 7e 00 00 66 03 06 60 7b 66 13 16 64 |uv.8~..f..`{f..d|
00000140 7b b9 10 00 eb 2b 66 52 66 50 06 53 6a 01 6a 10 |{....+fRfP.Sj.j.|
00000150 89 e6 66 60 b4 42 e8 7f 00 66 61 8d 64 10 72 01 |..f`.B...fa.d.r.|
00000160 c3 66 60 31 c0 e8 70 00 66 61 e2 da c6 06 45 7d |.f`1..p.fa....E}|
00000170 2b 66 60 66 0f b7 36 18 7c 66 0f b7 3e 1a 7c 66 |+f`f..6.|f..>.|f|
00000180 f7 f6 31 c9 87 ca 66 f7 f7 66 3d ff 03 00 00 77 |..1...f..f=....w|
00000190 17 c0 e4 06 41 08 e1 88 c5 88 d6 b8 01 02 e8 37 |....A..........7|
000001a0 00 66 61 72 01 c3 e2 c9 31 f6 8e d6 bc 68 7b 8e |.far....1....h{.|
000001b0 de 66 8f 06 78 00 be df 7d e8 09 00 31 c0 cd 16 |.f..x...}...1...|
000001c0 cd 19 f4 eb fd 66 60 ac 20 c0 74 09 b4 0e bb 07 |.....f`. .t.....|
000001d0 00 cd 10 eb f2 66 61 c3 8a 16 74 7b cd 13 c3 42 |.....fa...t{...B|
000001e0 6f 6f 74 20 65 72 72 6f 72 0d 0a 00 00 00 00 00 |oot error.......|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda1 ext4 290G 3.9G 271G 2% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
udev devtmpfs 1.9G 12K 1.9G 1% /dev
tmpfs tmpfs 384M 1.2M 383M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.9G 340K 1.9G 1% /run/shm
none tmpfs 100M 52K 100M 1% /run/user
/dev/sdb1 vfat 1.9G 1.1G 871M 55% /media/ubulaupc/LEXAR
=================== fdisk -l:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x000de809
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 616988671 308493312 83 Linux
/dev/sda2 616990718 625141759 4075521 5 Extended
Partition 2 does not start on physical sector boundary.
/dev/sda5 616990720 625141759 4075520 82 Linux swap / Solaris
Disk /dev/sdb: 2004 MB, 2004877312 bytes
129 heads, 32 sectors/track, 948 cylinders, total 3915776 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xc3072e18
Device Boot Start End Blocks Id System
/dev/sdb1 * 32 3915775 1957872 b W95 FAT32
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBRs of all disks (except USB without OS).
Grub-efi would not be selected by default because: no-win-efi
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (320GB) !
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04.3 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== User settings
The settings chosen by the user will not act on the boot.
paste.ubuntu.com ko (), using paste.debian
paste.debian.net ko (http://paste.debian.net/), using paste2
Il semble que tout soit bien installé. Je ne comprends pas pourquoi tu écris que le disque dur n'est pas reconnu : c'est quoi ce disque dur qui n'est pas reconnu ?
Hors ligne
#15 Le 12/10/2015, à 20:40
- Babdu89
Re : Probleme installation Ubuntu 14.04.3
Bonsoir.
Je ne comprends pas ton dernier message.
Bon tu as réinstallé sans chiffrage ni LVM. OK!
Tu as redémarré puis fais un boot info depuis ton Ubuntu qui marche .
Il est installé sur /dev/sda1.
On voit çà dans le dernier rapport boot info
ADDITIONAL INFORMATION :
=================== log of boot-info 2015-10-12__21h07 ===================
boot-info version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-info is executed in installed-session (Ubuntu 14.04.3 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.19.0-25-generic root=UUID=23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65 ro quiet splash vt.handoff=7=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 14.04.3 LTS CurrentSession:linux=================== blkid:
/dev/sda1: UUID="23d5a9e4-5cfc-4fbb-8984-2d3d6ca27a65" TYPE="ext4"
/dev/sda5: UUID="7b15145a-01c5-426f-a3ab-471a9ed80626" TYPE="swap"
/dev/sdb1: LABEL="LEXAR" UUID="DC41-5DBE" TYPE="vfat"1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Ce qui est en gras confirme ce que je dis.
Donc ton Ubuntu fonctionne...
Qu'est-ce que tu as bricolé ensuite?...
Edit.
Bonsoir malbo . Croisement de posts .
@+. Babdu89 .
Dernière modification par Babdu89 (Le 12/10/2015, à 20:41)
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#16 Le 12/10/2015, à 22:47
- Ubufab
Re : Probleme installation Ubuntu 14.04.3
Simplement que dans "perif" mon y voit pas mon disque dur :
http://imageshack.com/a/img909/4955/FEzxlC.png
Sur Windows (désolé... ><)
ça donne ça:
http://www.tutoriaux-excalibur.com/file … &type=full
On y voit bien les data (ex: C: , le lecteur CD ect et on y voit aussi combien de % il reste de mémoire )
Moi je n'y voit que Lexar et ordinateur et si je clique sur l'onglet ordinateur au cas ou je verrai mon disque dur affiché comme sur win avec le lecteur CD ect ça me donne ça:
http://imageshack.com/a/img912/5440/4Yq5Ue.png
Je n'arrive pas à m'exprimer de sorte que vous compreniez du coup je vais un peu imagé ^^"
En version Linux je voudrais savoir pourquoi ça m'affiche pas une sorte de ça:
http://www.01audio-video.com/Poste-Travail.jpg
Avec leur pourcentage et le lecteur CD
J'espere que vous comprenez mieux ce que je veux dire ^^'
:Un peu chiant: ahah :-p
Hors ligne
#17 Le 13/10/2015, à 04:42
- malbo
Re : Probleme installation Ubuntu 14.04.3
Tes explications du post #16 m'ont fait comprendre ce qui te gène. Effectivement, Ubuntu ne présente pas les partitions de la même façon que Windows. Si tu veux avoir quelque chose d'approchant (mais ce n'est pas Windows hein ?), tu peux passer la commande suivante dans un terminal :
df -Th
Le résultat de cette commande, je le connais déjà puisqu'on peut le voir dans ton dernier Boot-Info :
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda1 ext4 290G 3.9G 271G 2% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
udev devtmpfs 1.9G 12K 1.9G 1% /dev
tmpfs tmpfs 384M 1.2M 383M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.9G 340K 1.9G 1% /run/shm
none tmpfs 100M 52K 100M 1% /run/user
/dev/sdb1 vfat 1.9G 1.1G 871M 55% /media/ubulaupc/LEXAR
On y voit le taux d'occupation de ta partition racine (/dev/sda1) qui est de 2% et il te reste 271 Go de libre dessus.
Mais tu n'es pas obligé de taper cette commande : tu peux avoir l'information en lançant l'application "Moniteur système" et en allant dans l'onglet "Systèmes de fichiers" de ce Moniteur système.
Hors ligne
#18 Le 13/10/2015, à 05:28
- moko138
Re : Probleme installation Ubuntu 14.04.3
Pour faire apparaître dans nautilus l'espace-disque disponible,
(quand on dit "mémoire", on entend généralement la RAM)
il faut faire
Menu Affichage> Afficher la barre d'état.
(La barre d'état sera en bas de fenêtre).
Mais d'abord, pour faire apparaître les menus,
il faut, je suppose (car je n'utilise pas nautilus ni 14.04) cliquer sur l'une des deux icônes en haut à droite.
(Ou peut-être, comme dans firefox, utiliser la touche Alt).
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#19 Le 13/10/2015, à 16:58
- Ubufab
Re : Probleme installation Ubuntu 14.04.3
Merci beaucoup pour toutes ces aides et pour votre temps :D:D:D
Hors ligne
Pages : 1