Pages : 1
#1 Le 27/10/2015, à 15:39
- chronosremi
Problème avec lecteur LTO !
Bonjour,
J'ai acheté un vieux "Tandberg Data StorageLoader 1000 1U Ultrium LTO3".
Il se connecte a une carte SCSI qui je pense est détecter par Ubuntu car quand je tape la commande :
root@Chuck:/home/administrateur# lspci
04:00.0 SCSI storage controller: LSI Logic / Symbios Logic 53c810 (rev 12)
La carte est bien apparu alors je ne sais pas si c'est vraiment connecter je suppose que oui (sinon mon deuxième problème serai comment installer une carte scsi).
Mon problème est au niveau du lecteur LTO je ne le vois pas comment le connecter si vous pourriez m'aider à le connecter cela m'aiderai beaucoup et cela me permettrai de lancer mes sauvegardes
En vous remerciant d'avance.
Hors ligne
#2 Le 27/10/2015, à 17:08
- gl38
Re : Problème avec lecteur LTO !
Que dit la commande dmesg quand tu branches ton disque sur la carte et que tu l'allumes ?
Cordialement,
Guy
Hors ligne
#3 Le 27/10/2015, à 20:04
- chronosremi
Re : Problème avec lecteur LTO !
Merci de votre réponse voila ce que donne la commande dmesg (c'est très long ^^)
root@Chuck:/home/administrateur# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-30-generic (buildd@lgw01-13) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #34~14.04.1-Ubuntu SMP Fri Oct 2 22:09:39 UTC 2015 (Ubuntu 3.19.0-30.34~14.04.1-generic 3.19.8-ckt6)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-30-generic root=UUID=469a8957-26e6-43bb-9472-3d6ce610e4c5 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cdcdffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cdce0000-0x00000000cdce2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cdce3000-0x00000000cdceffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cdcf0000-0x00000000cdcfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001afffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. G41M-Combo/G41M-Combo, BIOS F3 06/09/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1b0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 0CE000000 mask FFE000000 uncachable
[ 0.000000] 4 base 0CDE00000 mask FFFE00000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 1C0000000 mask FC0000000 uncachable
[ 0.000000] 7 base 1B0000000 mask FF0000000 uncachable
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 2, base: 3328MB, range: 256MB, type UC
[ 0.000000] reg 3, base: 3296MB, range: 32MB, type UC
[ 0.000000] reg 4, base: 3294MB, range: 2MB, type UC
[ 0.000000] reg 5, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 6, base: 7GB, range: 1GB, type UC
[ 0.000000] reg 7, base: 6912MB, range: 256MB, type UC
[ 0.000000] total RAM covered: 6110M
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 8 lose cover RAM: 2816M
[ 0.000000] gran_size: 64K chunk_size: 128K num_reg: 8 lose cover RAM: 2816M
[ 0.000000] gran_size: 64K chunk_size: 256K num_reg: 8 lose cover RAM: 2816M
[ 0.000000] gran_size: 64K chunk_size: 512K num_reg: 8 lose cover RAM: 2816M
[ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 8 lose cover RAM: 2816M
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 8 lose cover RAM: 2816M
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 64K chunk_size: 8M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 8 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 64K chunk_size: 512M num_reg: 8 lose cover RAM: -256M
[ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 2G num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 128K num_reg: 8 lose cover RAM: 2816M
[ 0.000000] gran_size: 128K chunk_size: 256K num_reg: 8 lose cover RAM: 2816M
[ 0.000000] gran_size: 128K chunk_size: 512K num_reg: 8 lose cover RAM: 2816M
[ 0.000000] gran_size: 128K chunk_size: 1M num_reg: 8 lose cover RAM: 2816M
[ 0.000000] gran_size: 128K chunk_size: 2M num_reg: 8 lose cover RAM: 2816M
[ 0.000000] gran_size: 128K chunk_size: 4M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 128K chunk_size: 8M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 128K chunk_size: 16M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 128K chunk_size: 32M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 128K chunk_size: 64M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 128M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 256M num_reg: 8 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 128K chunk_size: 512M num_reg: 8 lose cover RAM: -256M
[ 0.000000] gran_size: 128K chunk_size: 1G num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 2G num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 256K num_reg: 8 lose cover RAM: 2816M
[ 0.000000] gran_size: 256K chunk_size: 512K num_reg: 8 lose cover RAM: 2816M
[ 0.000000] gran_size: 256K chunk_size: 1M num_reg: 8 lose cover RAM: 2816M
[ 0.000000] gran_size: 256K chunk_size: 2M num_reg: 8 lose cover RAM: 2816M
[ 0.000000] gran_size: 256K chunk_size: 4M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 256K chunk_size: 8M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 256K chunk_size: 16M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 256K chunk_size: 32M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 256K chunk_size: 64M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 128M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 256M num_reg: 8 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 256K chunk_size: 512M num_reg: 8 lose cover RAM: -256M
[ 0.000000] gran_size: 256K chunk_size: 1G num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 2G num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 512K num_reg: 8 lose cover RAM: 2816M
[ 0.000000] gran_size: 512K chunk_size: 1M num_reg: 8 lose cover RAM: 2816M
[ 0.000000] gran_size: 512K chunk_size: 2M num_reg: 8 lose cover RAM: 2816M
[ 0.000000] gran_size: 512K chunk_size: 4M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 512K chunk_size: 8M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 512K chunk_size: 16M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 512K chunk_size: 32M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 512K chunk_size: 64M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 128M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 256M num_reg: 8 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 512K chunk_size: 512M num_reg: 8 lose cover RAM: -256M
[ 0.000000] gran_size: 512K chunk_size: 1G num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 2G num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 1M num_reg: 8 lose cover RAM: 2816M
[ 0.000000] gran_size: 1M chunk_size: 2M num_reg: 8 lose cover RAM: 2816M
[ 0.000000] gran_size: 1M chunk_size: 4M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 1M chunk_size: 8M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 1M chunk_size: 16M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 1M chunk_size: 32M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 1M chunk_size: 64M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 128M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 256M num_reg: 8 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 1M chunk_size: 512M num_reg: 8 lose cover RAM: -256M
[ 0.000000] gran_size: 1M chunk_size: 1G num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 2G num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 2M chunk_size: 2M num_reg: 8 lose cover RAM: 2816M
[ 0.000000] gran_size: 2M chunk_size: 4M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 2M chunk_size: 8M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 2M chunk_size: 16M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 2M chunk_size: 32M num_reg: 8 lose cover RAM: 256M
[ 0.000000] gran_size: 2M chunk_size: 64M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 2M chunk_size: 128M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 2M chunk_size: 256M num_reg: 8 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 2M chunk_size: 512M num_reg: 8 lose cover RAM: -256M
[ 0.000000] gran_size: 2M chunk_size: 1G num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 2M chunk_size: 2G num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 4M chunk_size: 4M num_reg: 8 lose cover RAM: 770M
[ 0.000000] gran_size: 4M chunk_size: 8M num_reg: 8 lose cover RAM: 258M
[ 0.000000] gran_size: 4M chunk_size: 16M num_reg: 8 lose cover RAM: 258M
[ 0.000000] gran_size: 4M chunk_size: 32M num_reg: 8 lose cover RAM: 258M
[ 0.000000] gran_size: 4M chunk_size: 64M num_reg: 8 lose cover RAM: 2M
[ 0.000000] gran_size: 4M chunk_size: 128M num_reg: 8 lose cover RAM: 2M
[ 0.000000] gran_size: 4M chunk_size: 256M num_reg: 8 lose cover RAM: 2M
[ 0.000000] *BAD*gran_size: 4M chunk_size: 512M num_reg: 8 lose cover RAM: -254M
[ 0.000000] gran_size: 4M chunk_size: 1G num_reg: 8 lose cover RAM: 2M
[ 0.000000] gran_size: 4M chunk_size: 2G num_reg: 8 lose cover RAM: 2M
[ 0.000000] gran_size: 8M chunk_size: 8M num_reg: 8 lose cover RAM: 262M
[ 0.000000] gran_size: 8M chunk_size: 16M num_reg: 8 lose cover RAM: 262M
[ 0.000000] gran_size: 8M chunk_size: 32M num_reg: 8 lose cover RAM: 262M
[ 0.000000] gran_size: 8M chunk_size: 64M num_reg: 8 lose cover RAM: 6M
[ 0.000000] gran_size: 8M chunk_size: 128M num_reg: 8 lose cover RAM: 6M
[ 0.000000] gran_size: 8M chunk_size: 256M num_reg: 8 lose cover RAM: 6M
[ 0.000000] *BAD*gran_size: 8M chunk_size: 512M num_reg: 8 lose cover RAM: -250M
[ 0.000000] gran_size: 8M chunk_size: 1G num_reg: 8 lose cover RAM: 6M
[ 0.000000] gran_size: 8M chunk_size: 2G num_reg: 8 lose cover RAM: 6M
[ 0.000000] gran_size: 16M chunk_size: 16M num_reg: 8 lose cover RAM: 14M
[ 0.000000] gran_size: 16M chunk_size: 32M num_reg: 8 lose cover RAM: 270M
[ 0.000000] gran_size: 16M chunk_size: 64M num_reg: 8 lose cover RAM: 14M
[ 0.000000] gran_size: 16M chunk_size: 128M num_reg: 8 lose cover RAM: 14M
[ 0.000000] gran_size: 16M chunk_size: 256M num_reg: 8 lose cover RAM: 14M
[ 0.000000] *BAD*gran_size: 16M chunk_size: 512M num_reg: 8 lose cover RAM: -242M
[ 0.000000] gran_size: 16M chunk_size: 1G num_reg: 8 lose cover RAM: 14M
[ 0.000000] gran_size: 16M chunk_size: 2G num_reg: 8 lose cover RAM: 14M
[ 0.000000] gran_size: 32M chunk_size: 32M num_reg: 7 lose cover RAM: 30M
[ 0.000000] gran_size: 32M chunk_size: 64M num_reg: 7 lose cover RAM: 30M
[ 0.000000] gran_size: 32M chunk_size: 128M num_reg: 7 lose cover RAM: 30M
[ 0.000000] gran_size: 32M chunk_size: 256M num_reg: 7 lose cover RAM: 30M
[ 0.000000] gran_size: 32M chunk_size: 512M num_reg: 8 lose cover RAM: 30M
[ 0.000000] gran_size: 32M chunk_size: 1G num_reg: 7 lose cover RAM: 30M
[ 0.000000] gran_size: 32M chunk_size: 2G num_reg: 7 lose cover RAM: 30M
[ 0.000000] gran_size: 64M chunk_size: 64M num_reg: 7 lose cover RAM: 30M
[ 0.000000] gran_size: 64M chunk_size: 128M num_reg: 7 lose cover RAM: 30M
[ 0.000000] gran_size: 64M chunk_size: 256M num_reg: 7 lose cover RAM: 30M
[ 0.000000] gran_size: 64M chunk_size: 512M num_reg: 8 lose cover RAM: 30M
[ 0.000000] gran_size: 64M chunk_size: 1G num_reg: 7 lose cover RAM: 30M
[ 0.000000] gran_size: 64M chunk_size: 2G num_reg: 7 lose cover RAM: 30M
[ 0.000000] gran_size: 128M chunk_size: 128M num_reg: 6 lose cover RAM: 94M
[ 0.000000] gran_size: 128M chunk_size: 256M num_reg: 7 lose cover RAM: 94M
[ 0.000000] gran_size: 128M chunk_size: 512M num_reg: 8 lose cover RAM: 94M
[ 0.000000] gran_size: 128M chunk_size: 1G num_reg: 7 lose cover RAM: 94M
[ 0.000000] gran_size: 128M chunk_size: 2G num_reg: 7 lose cover RAM: 94M
[ 0.000000] gran_size: 256M chunk_size: 256M num_reg: 5 lose cover RAM: 222M
[ 0.000000] gran_size: 256M chunk_size: 512M num_reg: 5 lose cover RAM: 222M
[ 0.000000] gran_size: 256M chunk_size: 1G num_reg: 5 lose cover RAM: 222M
[ 0.000000] gran_size: 256M chunk_size: 2G num_reg: 5 lose cover RAM: 222M
[ 0.000000] gran_size: 512M chunk_size: 512M num_reg: 4 lose cover RAM: 478M
[ 0.000000] gran_size: 512M chunk_size: 1G num_reg: 5 lose cover RAM: 478M
[ 0.000000] gran_size: 512M chunk_size: 2G num_reg: 5 lose cover RAM: 478M
[ 0.000000] gran_size: 1G chunk_size: 1G num_reg: 3 lose cover RAM: 990M
[ 0.000000] gran_size: 1G chunk_size: 2G num_reg: 3 lose cover RAM: 990M
[ 0.000000] gran_size: 2G chunk_size: 2G num_reg: 2 lose cover RAM: 2014M
[ 0.000000] mtrr_cleanup: can not find optimal value
[ 0.000000] please specify mtrr_gran_size/mtrr_chunk_size
[ 0.000000] e820: update [mem 0xcde00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcdce0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f5320-0x000f532f] mapped at [ffff8800000f5320]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1afe00000-0x1afffffff]
[ 0.000000] [mem 0x1afe00000-0x1afffffff] page 2M
[ 0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1a0000000-0x1afdfffff]
[ 0.000000] [mem 0x1a0000000-0x1afdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x19fffffff]
[ 0.000000] [mem 0x180000000-0x19fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcdcdffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xcdbfffff] page 2M
[ 0.000000] [mem 0xcdc00000-0xcdcdffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[ 0.000000] [mem 0x100000000-0x17fffffff] page 2M
[ 0.000000] BRK [0x01fd8000, 0x01fd8fff] PGTABLE
[ 0.000000] BRK [0x01fd9000, 0x01fd9fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35a28000-0x36d0bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6D30 000014 (v00 GBT )
[ 0.000000] ACPI: RSDT 0x00000000CDCE3040 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 0x00000000CDCE30C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 0x00000000CDCE3180 004456 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 0x00000000CDCE0000 000040
[ 0.000000] ACPI: HPET 0x00000000CDCE7740 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 0x00000000CDCE77C0 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: TAMG 0x00000000CDCE7800 006352 (v01 GBT GBT B0 5455312E BG?? 00020101)
[ 0.000000] ACPI: APIC 0x00000000CDCE7640 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 0x00000000CDCEE4A0 0003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001afffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1afff7000-0x1afffbfff]
[ 0.000000] [ffffea0000000000-ffffea0006bfffff] PMD -> [ffff8801a9600000-ffff8801af5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1afffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xcdcdffff]
[ 0.000000] node 0: [mem 0x100000000-0x1afffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x1afffffff]
[ 0.000000] On node 0 totalpages: 1563774
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13108 pages used for memmap
[ 0.000000] DMA32 zone: 838880 pages, LIFO batch:31
[ 0.000000] Normal zone: 11264 pages used for memmap
[ 0.000000] Normal zone: 720896 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xce000000-0xcfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcdce0000-0xcdce2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcdce3000-0xcdceffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcdcf0000-0xcdcfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcdd00000-0xcdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce000000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff8801afc00000 s86144 r8192 d32640 u524288
[ 0.000000] pcpu-alloc: s86144 r8192 d32640 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1539317
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-30-generic root=UUID=469a8957-26e6-43bb-9472-3d6ce610e4c5 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 6054300K/6255096K available (7920K kernel code, 1174K rwdata, 3756K rodata, 1408K init, 1292K bss, 200796K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16640 nr_irqs:456 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2666.418 MHz processor
[ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.83 BogoMIPS (lpj=10665672)
[ 0.004014] pid_max: default: 32768 minimum: 301
[ 0.004023] ACPI: Core revision 20141107
[ 0.009613] ACPI: All ACPI Tables successfully acquired
[ 0.009638] Security Framework initialized
[ 0.009659] AppArmor: AppArmor initialized
[ 0.009661] Yama: becoming mindful.
[ 0.010263] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.014108] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.016037] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.016050] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.016427] Initializing cgroup subsys memory
[ 0.016436] Initializing cgroup subsys devices
[ 0.016441] Initializing cgroup subsys freezer
[ 0.016444] Initializing cgroup subsys net_cls
[ 0.016447] Initializing cgroup subsys blkio
[ 0.016450] Initializing cgroup subsys perf_event
[ 0.016453] Initializing cgroup subsys net_prio
[ 0.016456] Initializing cgroup subsys hugetlb
[ 0.016483] CPU: Physical Processor ID: 0
[ 0.016484] CPU: Processor Core ID: 0
[ 0.016486] mce: CPU supports 6 MCE banks
[ 0.016493] CPU0: Thermal monitoring enabled (TM2)
[ 0.016497] process: using mwait in idle threads
[ 0.016503] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.016503] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.016599] Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
[ 0.018952] ftrace: allocating 30022 entries in 118 pages
[ 0.028461] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068715] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz (fam: 06, model: 17, stepping: 0a)
[ 0.072000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.072000] ... version: 2
[ 0.072000] ... bit width: 40
[ 0.072000] ... generic registers: 2
[ 0.072000] ... value mask: 000000ffffffffff
[ 0.072000] ... max period: 000000007fffffff
[ 0.072000] ... fixed-purpose events: 3
[ 0.072000] ... event mask: 0000000700000003
[ 0.072000] x86: Booting SMP configuration:
[ 0.072000] .... node #0, CPUs: #1
[ 0.082274] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.082389] #2 #3
[ 0.108034] x86: Booted up 1 node, 4 CPUs
[ 0.108039] smpboot: Total of 4 processors activated (21331.34 BogoMIPS)
[ 0.110325] devtmpfs: initialized
[ 0.114591] evm: security.selinux
[ 0.114593] evm: security.SMACK64
[ 0.114594] evm: security.SMACK64EXEC
[ 0.114595] evm: security.SMACK64TRANSMUTE
[ 0.114596] evm: security.SMACK64MMAP
[ 0.114597] evm: security.ima
[ 0.114598] evm: security.capability
[ 0.114616] PM: Registering ACPI NVS region [mem 0xcdce0000-0xcdce2fff] (12288 bytes)
[ 0.114616] pinctrl core: initialized pinctrl subsystem
[ 0.114616] RTC time: 11:08:49, date: 10/27/15
[ 0.114616] NET: Registered protocol family 16
[ 0.120006] cpuidle: using governor ladder
[ 0.124006] cpuidle: using governor menu
[ 0.124064] ACPI: bus type PCI registered
[ 0.124067] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.124160] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.124163] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.124541] PCI: Using configuration type 1 for base access
[ 0.128141] ACPI: Added _OSI(Module Device)
[ 0.128143] ACPI: Added _OSI(Processor Device)
[ 0.128149] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.128150] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.130949] ACPI: Dynamic OEM Table Load:
[ 0.130955] ACPI: SSDT 0xFFFF8801A7CE8C00 00022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.131185] ACPI: Dynamic OEM Table Load:
[ 0.131189] ACPI: SSDT 0xFFFF8801A7CDFC00 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.132092] ACPI: Dynamic OEM Table Load:
[ 0.132096] ACPI: SSDT 0xFFFF8801A7CDFE00 000152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
[ 0.132318] ACPI: Dynamic OEM Table Load:
[ 0.132323] ACPI: SSDT 0xFFFF8801A7D34000 000152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
[ 0.132572] ACPI: Interpreter enabled
[ 0.132578] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.132581] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.132593] ACPI: (supports S0 S3 S4 S5)
[ 0.132595] ACPI: Using IOAPIC for interrupt routing
[ 0.132616] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.136372] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.136378] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.136382] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.136583] PCI host bridge to bus 0000:00
[ 0.136586] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.136588] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.136590] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.136592] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.136594] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.136595] pci_bus 0000:00: root bus resource [mem 0xcdd00000-0xfebfffff]
[ 0.136604] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000
[ 0.136623] DMAR: Forcing write-buffer flush capability
[ 0.136624] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.136698] pci 0000:00:01.0: [8086:2e31] type 01 class 0x060400
[ 0.136733] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.136801] pci 0000:00:02.0: [8086:2e32] type 00 class 0x030000
[ 0.136812] pci 0000:00:02.0: reg 0x10: [mem 0xfd400000-0xfd7fffff 64bit]
[ 0.136818] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.136823] pci 0000:00:02.0: reg 0x20: [io 0xff00-0xff07]
[ 0.136932] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.136946] pci 0000:00:1b.0: reg 0x10: [mem 0xfdff8000-0xfdffbfff 64bit]
[ 0.137009] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.137047] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.137093] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.137158] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.137196] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.137240] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.137305] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.137343] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.137388] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.137422] pci 0000:00:1d.0: reg 0x20: [io 0xfe00-0xfe1f]
[ 0.137472] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.137514] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.137548] pci 0000:00:1d.1: reg 0x20: [io 0xfd00-0xfd1f]
[ 0.137597] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.137640] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.137673] pci 0000:00:1d.2: reg 0x20: [io 0xfc00-0xfc1f]
[ 0.137723] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.137764] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.137798] pci 0000:00:1d.3: reg 0x20: [io 0xfb00-0xfb1f]
[ 0.137847] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.137897] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.137912] pci 0000:00:1d.7: reg 0x10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.138013] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.138061] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.138133] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.138179] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.138250] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0400-0x047f]: address conflict with ACPI CPU throttle [io 0x0410-0x0415]
[ 0.138254] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.138258] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.138261] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.138354] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018a
[ 0.138365] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.138372] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.138379] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.138386] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.138392] pci 0000:00:1f.2: reg 0x20: [io 0xf800-0xf80f]
[ 0.138406] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.138408] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.138410] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.138412] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.138431] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.138503] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.138547] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.138677] pci 0000:01:00.0: [1077:2432] type 00 class 0x0c0400
[ 0.138691] pci 0000:01:00.0: reg 0x10: [io 0xce00-0xceff]
[ 0.138703] pci 0000:01:00.0: reg 0x14: [mem 0xfdefc000-0xfdefffff 64bit]
[ 0.138732] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
[ 0.138826] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.138833] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.138835] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.138838] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.138912] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.138940] pci 0000:02:00.0: reg 0x10: [mem 0xfdcfe000-0xfdcfffff 64bit]
[ 0.139079] pci 0000:02:00.0: PME# supported from D0 D3hot
[ 0.144021] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.144027] pci 0000:00:1c.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.144112] pci 0000:03:00.0: [1969:1073] type 00 class 0x020000
[ 0.144137] pci 0000:03:00.0: reg 0x10: [mem 0xfdbc0000-0xfdbfffff 64bit]
[ 0.144155] pci 0000:03:00.0: reg 0x18: [io 0xbf00-0xbf7f]
[ 0.144258] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.152017] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.152021] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 0.152025] pci 0000:00:1c.1: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.152077] pci 0000:04:00.0: [1000:0001] type 00 class 0x010000
[ 0.152091] pci 0000:04:00.0: reg 0x10: [io 0xde00-0xdeff]
[ 0.152101] pci 0000:04:00.0: reg 0x14: [mem 0xfddff000-0xfddff0ff]
[ 0.152197] pci 0000:04:01.0: [1186:4300] type 00 class 0x020000
[ 0.152213] pci 0000:04:01.0: reg 0x10: [io 0xdc00-0xdcff]
[ 0.152222] pci 0000:04:01.0: reg 0x14: [mem 0xfddfe000-0xfddfe0ff]
[ 0.152259] pci 0000:04:01.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.152286] pci 0000:04:01.0: supports D1 D2
[ 0.152288] pci 0000:04:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.152365] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.152368] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.152372] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.152377] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.152379] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.152382] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.152384] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.152386] pci 0000:00:1e.0: bridge window [mem 0xcdd00000-0xfebfffff] (subtractive decode)
[ 0.152943] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.152991] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.153038] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[ 0.153085] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.153132] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.153179] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.153226] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.153274] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.153371] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.153458] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.153458] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.153458] vgaarb: loaded
[ 0.153458] vgaarb: bridge control possible 0000:00:02.0
[ 0.153458] SCSI subsystem initialized
[ 0.153458] libata version 3.00 loaded.
[ 0.153458] ACPI: bus type USB registered
[ 0.153458] usbcore: registered new interface driver usbfs
[ 0.153458] usbcore: registered new interface driver hub
[ 0.153458] usbcore: registered new device driver usb
[ 0.153458] PCI: Using ACPI for IRQ routing
[ 0.159139] PCI: pci_cache_line_size set to 64 bytes
[ 0.159189] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.159191] e820: reserve RAM buffer [mem 0xcdce0000-0xcfffffff]
[ 0.159317] NetLabel: Initializing
[ 0.159318] NetLabel: domain hash size = 128
[ 0.159319] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.159335] NetLabel: unlabeled traffic allowed by default
[ 0.159365] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.159365] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.159365] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.161015] Switched to clocksource hpet
[ 0.167676] AppArmor: AppArmor Filesystem Enabled
[ 0.167765] pnp: PnP ACPI init
[ 0.167937] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.167940] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.167942] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.167944] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.167946] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.167950] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.168045] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.168285] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.168479] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.168663] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.168787] system 00:05: [io 0x0400-0x04cf] could not be reserved
[ 0.168790] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.168961] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.168964] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.169119] system 00:07: [mem 0x000cc800-0x000cffff] has been reserved
[ 0.169121] system 00:07: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.169124] system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.169126] system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.169128] system 00:07: [mem 0xcdce0000-0xcdceffff] could not be reserved
[ 0.169130] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.169132] system 00:07: [mem 0x00100000-0xcdcdffff] could not be reserved
[ 0.169134] system 00:07: [mem 0xcdcf0000-0xcdcfffff] has been reserved
[ 0.169137] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.169139] system 00:07: [mem 0xfed13000-0xfed1dfff] has been reserved
[ 0.169141] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.169143] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.169145] system 00:07: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.169147] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.169149] system 00:07: [mem 0x000e0000-0x000effff] has been reserved
[ 0.169152] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.169160] pnp: PnP ACPI: found 8 devices
[ 0.177709] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.177713] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.177720] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.177730] pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
[ 0.177733] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.177735] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.177737] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.177744] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcdd00000-0xcdefffff 64bit pref]
[ 0.177749] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.177752] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.177755] pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde3ffff pref]
[ 0.177757] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.177760] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.177763] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.177767] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.177770] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.177774] pci 0000:00:1c.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.177777] pci 0000:00:1c.0: bridge window [mem 0xcdd00000-0xcdefffff 64bit pref]
[ 0.177782] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.177784] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 0.177788] pci 0000:00:1c.1: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.177792] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.177798] pci 0000:04:01.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
[ 0.177800] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.177802] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.177806] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.177813] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.177815] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.177817] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.177819] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.177821] pci_bus 0000:00: resource 8 [mem 0xcdd00000-0xfebfffff]
[ 0.177823] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.177824] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.177826] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.177828] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.177830] pci_bus 0000:02: resource 2 [mem 0xcdd00000-0xcdefffff 64bit pref]
[ 0.177832] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 0.177834] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.177836] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.177838] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.177840] pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.177841] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.177843] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.177845] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.177847] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.177849] pci_bus 0000:04: resource 8 [mem 0xcdd00000-0xfebfffff]
[ 0.177878] NET: Registered protocol family 2
[ 0.178115] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.178364] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.178693] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.178735] TCP: reno registered
[ 0.178747] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.178795] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.178920] NET: Registered protocol family 1
[ 0.178946] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.192125] pci 0000:00:1c.0: enabling device (0006 -> 0007)
[ 0.192253] PCI: CLS 4 bytes, default 64
[ 0.192334] Trying to unpack rootfs image as initramfs...
[ 0.507525] Freeing initrd memory: 19344K (ffff880035a28000 - ffff880036d0c000)
[ 0.507569] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.507572] software IO TLB [mem 0xc9ce0000-0xcdce0000] (64MB) mapped at [ffff8800c9ce0000-ffff8800cdcdffff]
[ 0.507884] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
[ 0.507899] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
[ 0.507913] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
[ 0.507930] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
[ 0.508036] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.508101] Scanning for low memory corruption every 60 seconds
[ 0.508411] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.508431] Initialise system trusted keyring
[ 0.508454] audit: initializing netlink subsys (disabled)
[ 0.508475] audit: type=2000 audit(1445944129.508:1): initialized
[ 0.508815] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.510692] zpool: loaded
[ 0.510695] zbud: loaded
[ 0.510861] VFS: Disk quotas dquot_6.5.2
[ 0.510902] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.511458] fuse init (API version 7.23)
[ 0.511611] Key type big_key registered
[ 0.512289] Key type asymmetric registered
[ 0.512292] Asymmetric key parser 'x509' registered
[ 0.512340] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.512412] io scheduler noop registered
[ 0.512415] io scheduler deadline registered (default)
[ 0.512451] io scheduler cfq registered
[ 0.512878] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.512895] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.512933] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.512934] vesafb: scrolling: redraw
[ 0.512936] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.512941] mtrr: type mismatch for d0000000,200000 old: write-back new: write-combining
[ 0.512943] mtrr: type mismatch for d0000000,100000 old: write-back new: write-combining
[ 0.512945] mtrr: type mismatch for d0000000,80000 old: write-back new: write-combining
[ 0.512947] mtrr: type mismatch for d0000000,40000 old: write-back new: write-combining
[ 0.512949] mtrr: type mismatch for d0000000,20000 old: write-back new: write-combining
[ 0.512951] mtrr: type mismatch for d0000000,10000 old: write-back new: write-combining
[ 0.512953] mtrr: type mismatch for d0000000,8000 old: write-back new: write-combining
[ 0.512955] mtrr: type mismatch for d0000000,4000 old: write-back new: write-combining
[ 0.512957] mtrr: type mismatch for d0000000,2000 old: write-back new: write-combining
[ 0.512959] mtrr: type mismatch for d0000000,1000 old: write-back new: write-combining
[ 0.512969] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010e80000, using 1216k, total 1216k
[ 0.513066] Console: switching to colour frame buffer device 80x30
[ 0.513076] fb0: VESA VGA frame buffer device
[ 0.513093] intel_idle: does not run on family 6 model 23
[ 0.513171] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.513175] ACPI: Power Button [PWRB]
[ 0.513225] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.513228] ACPI: Power Button [PWRF]
[ 0.513676] GHES: HEST is not enabled!
[ 0.513817] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.534157] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.554549] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.556218] Linux agpgart interface v0.103
[ 0.556296] agpgart-intel 0000:00:00.0: Intel G41 Chipset
[ 0.556312] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.556858] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.557003] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.558473] brd: module loaded
[ 0.559199] loop: module loaded
[ 0.559369] ata_piix 0000:00:1f.2: version 2.13
[ 0.559462] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.560225] scsi host0: ata_piix
[ 0.560414] scsi host1: ata_piix
[ 0.560458] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf800 irq 14
[ 0.560459] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf808 irq 15
[ 0.560570] libphy: Fixed MDIO Bus: probed
[ 0.560572] tun: Universal TUN/TAP device driver, 1.6
[ 0.560573] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.560654] PPP generic driver version 2.4.2
[ 0.560779] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.560786] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 0.561077] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.561080] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.561082] usb usb1: Product: xHCI Host Controller
[ 0.561084] usb usb1: Manufacturer: Linux 3.19.0-30-generic xhci-hcd
[ 0.561085] usb usb1: SerialNumber: 0000:02:00.0
[ 0.561198] hub 1-0:1.0: USB hub found
[ 0.561208] hub 1-0:1.0: 2 ports detected
[ 0.561312] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.561316] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 0.564370] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.564388] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.564391] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.564392] usb usb2: Product: xHCI Host Controller
[ 0.564394] usb usb2: Manufacturer: Linux 3.19.0-30-generic xhci-hcd
[ 0.564396] usb usb2: SerialNumber: 0000:02:00.0
[ 0.564505] hub 2-0:1.0: USB hub found
[ 0.564516] hub 2-0:1.0: 2 ports detected
[ 0.564622] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.564628] ehci-pci: EHCI PCI platform driver
[ 0.564708] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.564716] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 0.568631] ehci-pci 0000:00:1d.7: cache line size of 4 is not supported
[ 0.568643] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 0.580022] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.580063] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.580066] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.580068] usb usb3: Product: EHCI Host Controller
[ 0.580071] usb usb3: Manufacturer: Linux 3.19.0-30-generic ehci_hcd
[ 0.580073] usb usb3: SerialNumber: 0000:00:1d.7
[ 0.580213] hub 3-0:1.0: USB hub found
[ 0.580220] hub 3-0:1.0: 8 ports detected
[ 0.580404] ehci-platform: EHCI generic platform driver
[ 0.580415] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.580419] ohci-pci: OHCI PCI platform driver
[ 0.580431] ohci-platform: OHCI generic platform driver
[ 0.580439] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.580516] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.580522] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.580528] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.580544] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
[ 0.580586] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.580588] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.580590] usb usb4: Product: UHCI Host Controller
[ 0.580592] usb usb4: Manufacturer: Linux 3.19.0-30-generic uhci_hcd
[ 0.580593] usb usb4: SerialNumber: 0000:00:1d.0
[ 0.580695] hub 4-0:1.0: USB hub found
[ 0.580702] hub 4-0:1.0: 2 ports detected
[ 0.580845] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.580850] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 0.580856] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.580881] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
[ 0.580921] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.580923] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.580925] usb usb5: Product: UHCI Host Controller
[ 0.580927] usb usb5: Manufacturer: Linux 3.19.0-30-generic uhci_hcd
[ 0.580928] usb usb5: SerialNumber: 0000:00:1d.1
[ 0.581027] hub 5-0:1.0: USB hub found
[ 0.581033] hub 5-0:1.0: 2 ports detected
[ 0.581181] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.581187] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 0.581192] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.581215] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
[ 0.581254] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.581256] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.581258] usb usb6: Product: UHCI Host Controller
[ 0.581259] usb usb6: Manufacturer: Linux 3.19.0-30-generic uhci_hcd
[ 0.581261] usb usb6: SerialNumber: 0000:00:1d.2
[ 0.581360] hub 6-0:1.0: USB hub found
[ 0.581367] hub 6-0:1.0: 2 ports detected
[ 0.581514] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.581520] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7
[ 0.581525] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.581549] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
[ 0.581588] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.581590] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.581592] usb usb7: Product: UHCI Host Controller
[ 0.581594] usb usb7: Manufacturer: Linux 3.19.0-30-generic uhci_hcd
[ 0.581596] usb usb7: SerialNumber: 0000:00:1d.3
[ 0.581694] hub 7-0:1.0: USB hub found
[ 0.581700] hub 7-0:1.0: 2 ports detected
[ 0.581828] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.615479] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 0.615481] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 0.724327] ata1.00: ATA-9: WDC WD30EZRX-00SPEB0, 80.00A80, max UDMA/133
[ 0.724331] ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.732321] ata1.00: configured for UDMA/133
[ 0.732429] scsi 0:0:0:0: Direct-Access ATA WDC WD30EZRX-00S 0A80 PQ: 0 ANSI: 5
[ 0.732630] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 0.732632] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.732667] sd 0:0:0:0: [sda] Write Protect is off
[ 0.732669] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.732686] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.732688] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.733785] ata2.00: ATA-8: KINGSTON SV300S37A120G, 603ABBF0, max UDMA/133
[ 0.733788] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 0.733795] ata2.01: ATAPI: TSSTcorp CDDVDW SH-S223F, SB02, max UDMA/100
[ 0.741567] ata2.00: configured for UDMA/133
[ 0.756121] ata2.01: configured for UDMA/100
[ 0.756514] scsi 1:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[ 0.756682] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 0.756713] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 0.756759] sd 1:0:0:0: [sdb] Write Protect is off
[ 0.756761] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.757051] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.757357] scsi 1:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB02 PQ: 0 ANSI: 5
[ 0.773950] sr 1:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.773954] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.774098] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 0.774160] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 0.774333] sdb: sdb1 sdb2 < sdb5 >
[ 0.774941] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 0.802498] sda: sda1 sda2
[ 0.802727] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.864094] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.864243] mousedev: PS/2 mouse device common for all mice
[ 0.864397] rtc_cmos 00:01: RTC can wake from S4
[ 0.864508] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.864534] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.864560] i2c /dev entries driver
[ 0.864642] device-mapper: uevent: version 1.0.3
[ 0.864716] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[ 0.864735] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.864916] PCCT header not found.
[ 0.864917] ACPI PCC probe failed.
[ 0.865015] TCP: cubic registered
[ 0.865138] NET: Registered protocol family 10
[ 0.865359] NET: Registered protocol family 17
[ 0.865370] Key type dns_resolver registered
[ 0.865693] Loading compiled-in X.509 certificates
[ 0.866666] Loaded X.509 cert 'Magrathea: Glacier signing key: 53b87e38b524cd2812672fc8904371ea0fabdce5'
[ 0.866683] registered taskstats version 1
[ 0.868748] Key type trusted registered
[ 0.872103] Key type encrypted registered
[ 0.872110] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.872114] ima: No TPM chip found, activating TPM-bypass!
[ 0.872133] evm: HMAC attrs: 0x1
[ 0.872448] Magic number: 3:285:126
[ 0.872531] acpi device:01: hash matches
[ 0.872587] rtc_cmos 00:01: setting system clock to 2015-10-27 11:08:50 UTC (1445944130)
[ 0.872947] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.872949] EDD information not available.
[ 0.873005] PM: Hibernation image not present or could not be loaded.
[ 0.873474] Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
[ 0.873477] Write protecting the kernel read-only data: 12288k
[ 0.873735] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
[ 0.873894] Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000)
[ 0.886679] systemd-udevd[129]: starting version 204
[ 0.915086] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.16-k.
[ 0.915273] qla2xxx [0000:01:00.0]-001d: : Found an ISP2432 irq 16 iobase 0xffffc90010e5e000.
[ 0.916069] qla2xxx [0000:01:00.0]-0034:2: MSI-X: Unsupported ISP 2432 SSVID/SSDID (0x103C,0x7040).
[ 0.918275] sym0: <810a> rev 0x12 at pci 0000:04:00.0 irq 20
[ 0.922826] sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
[ 0.927122] sym0: SCSI BUS has been reset.
[ 0.929272] scsi host3: sym-2.2.3
[ 0.929737] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.929840] r8169 0000:04:01.0 (unnamed net_device) (uninitialized): not PCI Express
[ 0.930156] r8169 0000:04:01.0 eth0: RTL8169sb/8110sb at 0xffffc90010e62000, 84:c9:b2:37:82:ff, XID 10000000 IRQ 19
[ 0.930159] r8169 0000:04:01.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 0.936483] atl1c 0000:03:00.0: version 1.0.1.1-NAPI
[ 1.016546] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.284132] scsi host2: qla2xxx
[ 1.284502] qla2xxx [0000:01:00.0]-00fb:2: QLogic HPAE311A - PCI-Express 4Gb Fibre Channel HBA.
[ 1.284511] qla2xxx [0000:01:00.0]-00fc:2: ISP2432: PCIe (2.5GT/s x4) @ 0000:01:00.0 hdma+ host#=2 fw=7.01.00 (9496).
[ 1.504013] tsc: Refined TSC clocksource calibration: 2666.615 MHz
[ 1.583108] qla2xxx [0000:01:00.0]-500a:2: LOOP UP detected (4 Gbps).
[ 2.504082] Switched to clocksource tsc
[ 3.924024] floppy0: no floppy controllers found
[ 6.067215] random: init urandom read with 51 bits of entropy available
[ 6.100233] init: plymouth-upstart-bridge main process (191) terminated with status 1
[ 6.100244] init: plymouth-upstart-bridge main process ended, respawning
[ 6.106803] init: plymouth-upstart-bridge main process (201) terminated with status 1
[ 6.106816] init: plymouth-upstart-bridge main process ended, respawning
[ 6.111601] init: plymouth-upstart-bridge main process (204) terminated with status 1
[ 6.111612] init: plymouth-upstart-bridge main process ended, respawning
[ 6.114911] init: plymouth-upstart-bridge main process (206) terminated with status 1
[ 6.114921] init: plymouth-upstart-bridge main process ended, respawning
[ 6.217010] Adding 6253564k swap on /dev/sdb5. Priority:-1 extents:1 across:6253564k SSFS
[ 6.307810] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 6.356787] systemd-udevd[344]: starting version 204
[ 6.401235] lp: driver loaded but no devices found
[ 6.411414] ppdev: user-space parallel port driver
[ 6.415976] parport_pc 00:04: reported by Plug and Play ACPI
[ 6.416058] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 6.512389] lp0: using parport0 (interrupt-driven).
[ 6.546632] audit: type=1400 audit(1445944136.170:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=440 comm="apparmor_parser"
[ 6.546640] audit: type=1400 audit(1445944136.170:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=440 comm="apparmor_parser"
[ 6.547049] audit: type=1400 audit(1445944136.170:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=440 comm="apparmor_parser"
[ 6.548705] Bluetooth: Core ver 2.20
[ 6.548730] NET: Registered protocol family 31
[ 6.548732] Bluetooth: HCI device and connection manager initialized
[ 6.548737] Bluetooth: HCI socket layer initialized
[ 6.548741] Bluetooth: L2CAP socket layer initialized
[ 6.548749] Bluetooth: SCO socket layer initialized
[ 6.557592] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.557596] Bluetooth: BNEP filters: protocol multicast
[ 6.557602] Bluetooth: BNEP socket layer initialized
[ 6.563207] Bluetooth: RFCOMM TTY layer initialized
[ 6.563216] Bluetooth: RFCOMM socket layer initialized
[ 6.563225] Bluetooth: RFCOMM ver 1.11
[ 6.565183] init: cups main process (495) killed by HUP signal
[ 6.565195] init: cups main process ended, respawning
[ 6.585743] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.618426] intel_rng: FWH not detected
[ 6.620755] [drm] Initialized drm 1.1.0 20060810
[ 6.638977] audit: type=1400 audit(1445944136.262:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=525 comm="apparmor_parser"
[ 6.638987] audit: type=1400 audit(1445944136.262:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=525 comm="apparmor_parser"
[ 6.638991] audit: type=1400 audit(1445944136.262:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=525 comm="apparmor_parser"
[ 6.639467] audit: type=1400 audit(1445944136.262:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=525 comm="apparmor_parser"
[ 6.639475] audit: type=1400 audit(1445944136.262:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=525 comm="apparmor_parser"
[ 6.639689] audit: type=1400 audit(1445944136.262:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=525 comm="apparmor_parser"
[ 6.767162] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x000000000000042c-0x000000000000042d (\GP2C) (20141107/utaddress-258)
[ 6.767172] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.767251] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.776756] [drm] Memory usable by graphics device = 2048M
[ 6.776762] checking generic (d0000000 130000) vs hw (d0000000 10000000)
[ 6.776763] fb: switching to inteldrmfb from VESA VGA
[ 6.776798] Console: switching to colour dummy device 80x25
[ 6.776876] [drm] Replacing VGA console driver
[ 6.780532] leds_ss4200: no LED devices found
[ 6.814916] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.814920] [drm] Driver supports precise vblank timestamp query.
[ 6.815015] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.817570] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
[ 6.856365] i915 0000:00:02.0: No connectors reported connected with modes
[ 6.856371] [drm] Cannot find any crtc or sizes - going 1024x768
[ 6.857317] fbcon: inteldrmfb (fb0) is primary device
[ 6.857373] Console: switching to colour frame buffer device 128x48
[ 6.857396] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.857398] i915 0000:00:02.0: registered panic notifier
[ 6.872594] gpio_ich: GPIO from 462 to 511 on gpio_ich
[ 6.876574] init: failsafe main process (575) killed by TERM signal
[ 6.946212] sound hdaudioC0D2: autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[ 6.946216] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.946218] sound hdaudioC0D2: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 6.946220] sound hdaudioC0D2: mono: mono_out=0x0
[ 6.946222] sound hdaudioC0D2: dig-out=0x20/0x0
[ 6.946223] sound hdaudioC0D2: inputs:
[ 6.946226] sound hdaudioC0D2: Rear Mic=0x1a
[ 6.946228] sound hdaudioC0D2: Front Mic=0x1e
[ 6.946230] sound hdaudioC0D2: Line=0x1b
[ 6.946232] sound hdaudioC0D2: CD=0x1f
[ 6.954324] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[ 6.954754] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 6.955097] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 6.955373] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 6.955699] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.160245] init: samba-ad-dc main process (738) terminated with status 1
[ 7.217391] random: nonblocking pool is initialized
[ 7.236690] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 7.265747] audit: type=1400 audit(1445944136.890:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=802 comm="apparmor_parser"
[ 7.276531] r8169 0000:04:01.0 eth0: link down
[ 7.276555] r8169 0000:04:01.0 eth0: link down
[ 7.276584] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.093570] init: plymouth-upstart-bridge main process ended, respawning
[ 8.101537] init: plymouth-upstart-bridge main process (1180) terminated with status 1
[ 8.101554] init: plymouth-upstart-bridge main process ended, respawning
[ 9.628069] floppy0: no floppy controllers found
[ 10.097759] r8169 0000:04:01.0 eth0: link up
[ 10.097776] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 25.254527] show_signal_msg: 150 callbacks suppressed
[ 25.254531] signon-ui[2327]: segfault at 18 ip 00007f2f47b627e2 sp 00007ffd19d450d0 error 4 in libqxcb.so[7f2f47b33000+a7000]
[ 36.634184] audit: type=1400 audit(1445944166.257:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2389 comm="apparmor_parser"
[ 36.634196] audit: type=1400 audit(1445944166.257:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2389 comm="apparmor_parser"
[ 36.634588] audit: type=1400 audit(1445944166.257:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2389 comm="apparmor_parser"
[ 3292.316512] SRFeature[7034]: segfault at 10 ip 000000000042e2d9 sp 00007ffff4cdc230 error 4 in SRFeature[400000+50f000]
[ 3331.904362] SRFeature[7634]: segfault at 10 ip 000000000042e2d9 sp 00007ffe8fe64010 error 4 in SRFeature[400000+50f000]
[ 3379.520213] webbrowser-app[7665]: segfault at 0 ip 00007fda9cb50421 sp 00007ffc8a19a530 error 4 in libc-2.19.so[7fda9cac5000+1bb000]
[ 3618.903583] perf interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 4029.682284] SRFeature[14089]: segfault at 10 ip 000000000042e2d9 sp 00007ffcb2bca6d0 error 4 in SRFeature[400000+50f000]
[ 4144.117624] SRFeature[14585]: segfault at 10 ip 000000000042e2d9 sp 00007ffddce52070 error 4 in SRFeature[400000+50f000]
[ 7110.190871] perf interrupt took too long (5060 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[11202.231855] perf interrupt took too long (10206 > 10000), lowering kernel.perf_event_max_sample_rate to 12500Modération : bonjour chronosremy. Tu t'es juste trompé d'un cran pour poster le résultat de dmesg. Il fallait cliquer sur <> et non pas sur le symbole d'infobulle.
Dernière modification par olivi4 (Le 28/10/2015, à 11:33)
Hors ligne
#4 Le 31/10/2015, à 15:09
- chronosremi
Re : Problème avec lecteur LTO !
quelqu’un pour mon problème SVP
Hors ligne
#5 Le 01/11/2015, à 11:55
- gl38
Re : Problème avec lecteur LTO !
D'après le fil, il me semble qu'il faut installer les paquets dump et mt-st.
Ton retour de dmesg contient trop de choses. Il faudrait recommencer après avoir débranché et rebranché le lecteur, les dernières lignes de dmesg devraient noter quelque chose concernant ces actions.
En fin il devrait y avoir un /dev/st0 ou quelque chose d'approchant.
Je n'ai pas de lecteur de bandes et j'avoue que j'ai oublié comment on s'en servait.
Cordialement,
Guy
Hors ligne
#6 Le 01/11/2015, à 12:05
- credenhill
Re : Problème avec lecteur LTO !
hello
que répond la commande
mt statusHors ligne
#7 Le 02/11/2015, à 17:20
- chronosremi
Re : Problème avec lecteur LTO !
Merci pour vos réponse.
Pour la commande dsmeg ce qui apparaît a la fin après avoir débrancher et rebrancher le câble c'est :
[ 859.776709] sym0: SCSI BUS reset detected.
[ 859.780699] sym0: SCSI BUS has been reset.
[ 859.780727] sym0: SCSI BUS reset detected.
[ 859.784719] sym0: SCSI BUS has been reset.Pour la commande "mt status" voila ce qu'il m'indique :
root@Chuck:/home/administrateur# mt status
/dev/tape: No such file or directoryHors ligne
#8 Le 02/11/2015, à 17:41
- gl38
Re : Problème avec lecteur LTO !
Que donne la commande lsmod ?
D'après la page, on devrait voir un module dont le nom commence par sym dans la liste.
Est-ce qu'au branchement, le lecteur fait du bruit, allume une diode ?
Cordialement,
Guy
Hors ligne
#9 Le 02/11/2015, à 17:54
- chronosremi
Re : Problème avec lecteur LTO !
Merci pour votre réponse rapide
Voila ce que donne la commande lsmod
root@Chuck:/home/administrateur# lsmod
Module Size Used by
snd_hda_codec_via 32768 1
snd_hda_codec_generic 69632 1 snd_hda_codec_via
snd_hda_intel 36864 3
snd_hda_controller 32768 1 snd_hda_intel
coretemp 16384 0
snd_hda_codec 143360 4 snd_hda_codec_via,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
kvm_intel 151552 0
gpio_ich 16384 0
snd_hwdep 20480 1 snd_hda_codec
i915 1048576 3
kvm 479232 1 kvm_intel
snd_pcm 106496 3 snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
lpc_ich 24576 0
snd_rawmidi 32768 1 snd_seq_midi
video 20480 1 i915
snd_seq 65536 2 snd_seq_midi_event,snd_seq_midi
serio_raw 16384 0
drm_kms_helper 126976 1 i915
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 32768 2 snd_pcm,snd_seq
drm 344064 5 i915,drm_kms_helper
snd 86016 16 snd_hwdep,snd_timer,snd_hda_codec_via,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
i2c_algo_bit 16384 1 i915
soundcore 16384 2 snd,snd_hda_codec
shpchp 40960 0
8250_fintek 16384 0
mac_hid 16384 0
bnep 20480 2
rfcomm 69632 0
bluetooth 491520 10 bnep,rfcomm
parport_pc 32768 1
ppdev 20480 0
binfmt_misc 20480 1
lp 20480 0
parport 45056 3 lp,ppdev,parport_pc
r8169 81920 0
mii 16384 1 r8169
sym53c8xx 81920 0
pata_acpi 16384 0
scsi_transport_spi 32768 1 sym53c8xx
qla2xxx 638976 0
atl1c 49152 0
scsi_transport_fc 65536 1 qla2xxxAu branchement le lecteur faire bien du bruit je pense qu'il check les emplacements des différentes cartouches et l'afficheur m'indique ready après quelque secondes.
Hors ligne
#10 Le 02/11/2015, à 18:06
- gl38
Re : Problème avec lecteur LTO !
Je vois sym53c8xx qui m'a l'air d'être le bon module pour gérer la carte.
Si après avoir branché le lecteur, tu tapes
sudo rmmod sym53c8xx
sudo insmod sym53c8xxest-ce que dmesg dit clairement qu'il voit le lecteur et y a-t-il un /dev/tape ?
Cordialement,
Guy
Hors ligne
#11 Le 02/11/2015, à 18:43
- chronosremi
Re : Problème avec lecteur LTO !
non je ne voit pas de /dev/tape je vous met ce qu'il me met
[ 4849.622473] sym0: detaching ...
[ 4849.622478] sym0: resetting chip
[ 5008.946862] sym0: <810a> rev 0x12 at pci 0000:04:00.0 irq 20
[ 5008.948970] sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
[ 5008.952009] sym0: SCSI BUS has been reset.
[ 5008.955233] scsi host4: sym-2.2.3Par contre j'ai eu un probleme avec la commande
sudo insmod sym53c8xxil ne trouve pas la commande vraiment bizarre j'ai du utiliser la commande "modprobe" à la place
Cordialement.
Dernière modification par chronosremi (Le 02/11/2015, à 18:45)
Hors ligne
#12 Le 02/11/2015, à 18:57
- gl38
Re : Problème avec lecteur LTO !
Est-ce que /dev/st0 existe ?
Que donne
cat /proc/scsi/scsiCordialement,
Guy
Hors ligne
#13 Le 02/11/2015, à 19:32
- chronosremi
Re : Problème avec lecteur LTO !
Voila ce que donne la commande "cat /proc/scsi/scsi"
root@Chuck:/home/administrateur# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: WDC WD30EZRX-00S Rev: 0A80
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: KINGSTON SV300S3 Rev: BBF0
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi1 Channel: 00 Id: 01 Lun: 00
Vendor: TSSTcorp Model: CDDVDW SH-S223F Rev: SB02
Type: CD-ROM ANSI SCSI revision: 05il ne voit pas de /dev/st0
:-/
Hors ligne
#14 Le 02/11/2015, à 21:38
- gl38
Re : Problème avec lecteur LTO !
Que donne
ls -l /dev/st*S'il n'y a pas de /dev/st0 ou approchant, on peut le créer en s'inspirant de cette page
avec un
sudo mknod -m 666 /dev/st0 c 9 0alors
mt -f /dev/st0 statusdevrait donner une réponse.
Mais je trouve étonnant qu'il ne soit pas créé par le système.
Cordialement,
Guy
Hors ligne
#15 Le 03/11/2015, à 03:52
- chronosremi
Re : Problème avec lecteur LTO !
Merci de votre Réponse voila j'ai tout fait voici ce qu'il me donne
root@Chuck:/home/administrateur# ls -l /dev/st*
lrwxrwxrwx 1 root root 15 nov. 2 16:11 /dev/stderr -> /proc/self/fd/2
lrwxrwxrwx 1 root root 15 nov. 2 16:11 /dev/stdin -> /proc/self/fd/0
lrwxrwxrwx 1 root root 15 nov. 2 16:11 /dev/stdout -> /proc/self/fd/1
root@Chuck:/home/administrateur# sudo mknod -m 666 /dev/st0 c 9 0
root@Chuck:/home/administrateur# mt -f /dev/st0 status
/dev/st0: No such device or addressCordialement
Hors ligne
#16 Le 03/11/2015, à 10:23
- gl38
Re : Problème avec lecteur LTO !
Voici une autre doc
Il semble qu'il faut charger le module st.
Sous ubuntu il ne faut pas utiliser la commande rpm qui est faite pour d'autres variantes de Linux.
Cordialement,
Guy
Hors ligne
#17 Le 03/11/2015, à 15:41
- chronosremi
Re : Problème avec lecteur LTO !
Bonjour merci d'encore m'aider
j'ai fait ce qui était marquer la commande "modinfo st" me donne ça :
root@Chuck:/home/administrateur# modinfo st
filename: /lib/modules/3.19.0-30-generic/kernel/drivers/scsi/st.ko
alias: scsi:t-0x01*
alias: char-major-9-*
license: GPL
description: SCSI tape (st) driver
author: Kai Makisara
srcversion: 55AFE158DCEC28788A11BF5
depends:
intree: Y
vermagic: 3.19.0-30-generic SMP mod_unload modversions
signer: Magrathea: Glacier signing key
sig_key: 53:B8:7E:38:B5:24:CD:28:12:67:2F:C8:90:43:71:EA:0F:AB:DC:E5
sig_hashalgo: sha512
parm: buffer_kbs:Default driver buffer size for fixed block mode (KB; 32) (int)
parm: max_sg_segs:Maximum number of scatter/gather segments to use (256) (int)
parm: try_direct_io:Try direct I/O between user buffer and tape drive (1) (int)
parm: debug_flag:Enable DEBUG, same as setting debugging=1 (int)
parm: try_rdio:Try direct read i/o when possible (int)
parm: try_wdio:Try direct write i/o when possible (int)D'après le tuto c'est bien initialisé.
par contre la vérification de la communication avec le lecteur n’apparaît pas quand je consulte les log du serveur il devrais m'afficher sa
Attached scsi tape st0 at scsi0, channel 0, id 3, lun 0
st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 1048575
st: Version 20040318, fixed bufsize 32768, s/g segs 256Mais il ne le fait pas sa doit venir de la le problème a mon avis. Après comment le résoudre je ne sais pas comment faire.
J’espère que vous pourrez m'aider.
Cordialement
Hors ligne
#18 Le 03/11/2015, à 16:25
- gl38
Re : Problème avec lecteur LTO !
Est-ce qu'il y a des /dev/st??
L'annexe D du tuto dit qu'il faut tous les créer comme indiqué dans la page 16 (avec un sudo).
Et ensuite
sudo rmmod st
sudo modprobe stCordialement,
Guy
Hors ligne
#19 Le 03/11/2015, à 20:08
- chronosremi
Re : Problème avec lecteur LTO !
je viens de finir l'annexe D les /dev/st sont bien creer la commande ls -l /dev/st* me donne ça maintenant :
root@Chuck:/home/administrateur# ls -l /dev/st*
crw-rw-rw- 1 root root 9, 0 nov. 3 18:51 /dev/st0
crw-rw-rw- 1 root root 9, 96 nov. 3 18:52 /dev/st0a
crw-rw-rw- 1 root root 9, 32 nov. 3 18:51 /dev/st0l
crw-rw-rw- 1 root root 9, 64 nov. 3 18:52 /dev/st0m
crw-rw-rw- 1 root root 9, 1 nov. 3 18:51 /dev/st1
crw-rw-rw- 1 root root 9, 33 nov. 3 18:51 /dev/st1l
crw-rw-rw- 1 root root 9, 65 nov. 3 18:52 /dev/st1m
lrwxrwxrwx 1 root root 15 nov. 3 18:16 /dev/stderr -> /proc/self/fd/2
lrwxrwxrwx 1 root root 15 nov. 3 18:16 /dev/stdin -> /proc/self/fd/0
lrwxrwxrwx 1 root root 15 nov. 3 18:16 /dev/stdout -> /proc/self/fd/1Cordialement
Hors ligne
#20 Le 03/11/2015, à 22:19
- gl38
Re : Problème avec lecteur LTO !
Et quoi de neuf dans dmesg quand on débranche et rebranche le lecteur ?
Et en redémarrant l'ordinateur avec le lecteur branché ?
Cordialement,
Guy
Hors ligne
#21 Le 04/11/2015, à 14:38
- chronosremi
Re : Problème avec lecteur LTO !
bonjour,
La commande dmesg n'affiche toujours pas de St et ce qui est bizarre aussi c'est qu'en tapant la commande ls -l /dev/st* plus aucun st que j'avais rajouter hier n’apparaît après redémarrage .
Je sais pas d'ou cela peut bien venir je suis entrain de voir aussi si cela ne viendrais pas d'un driver a installer pour le lecteur LTO sur le site web du constructeur il y a un gestionnaire pour le lecteur .je vais essayer sa mais si c'est pas ça j’espère qu'on va trouver une solution .
Cordialement
Hors ligne
Pages : 1