Pages : 1
#1 Le 03/11/2015, à 14:14
- Massuelles
tni non reconnu
Bonjour,
Je suis instit et ai converti toute l'école à Ubuntu (plus de 200 enfants), mais je me heurte à un problème avec le tni (ce qui met un frein à ma linuxisation de l'école) qui n'est pas reconnu par l'ordinateur.
J'ai installé open sankoré mais il ne fonctionne pas avec le stylo sur le tableau numérique. Le tni est de marque Sanyo, j'ai trouvé son adresse ip: 169.254.100.100.
Lorsqu'on branche le tni sur l'ordi via port USB il ne se passe rien.
Merci de bien vouloir m'aider et arriver à prouver que Linux c'est mieux que Windows!
Hors ligne
#2 Le 03/11/2015, à 14:32
- cyberesprit
Re : tni non reconnu
Salut,
Super pour la migration de l'école envers le libre ;-)
Par contre, c'est normal qu'il ne se passe rien quand tu le branche en usb, mais tu peux au moins vérifier avec ces commandes qu'il est bien vu :
lspciet
dmesgCette dernière à faire un petit peu après la connexion, tu devrais voir apparaître des messages le concernant si tout va bien.
Après, ce doit probablement être à une application comme OpenSankoré de le gérer (que ce soit usb ou réseau).
Si il n'y a personne qui n'a déjà eu affaire à un TNI ici (c'est mon cas), tu devrais peut-être, si ce n'est déjà fait, faire une demande d'assistance sur un forum spécialisé TNI ou OpenSankoré, voir aussi sur la liste de diffusion EDUC de l'April.
Par contre si tu pouvais aussi donner plus d'information sur le TNI, comme le modèle par exemple pour commencer, ce serait plus facile pour d'éventuelles recherches.
Librement
Dernière modification par cyberesprit (Le 03/11/2015, à 14:34)
Cyberesprit, libriste militant
Hors ligne
#3 Le 04/11/2015, à 09:36
- Massuelles
Re : tni non reconnu
Ah merci pour l'aide c'est cool!
Bon voilà ce que je trouve quand je tape lspci ( c'est du chinois pour moi):
e4@e4-Presario-CQ61-Notebook-PC:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge
00:01.0 PCI bridge: Hewlett-Packard Company Device 9602
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1)
00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3c)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS880M [Mobility Radeon HD 4225/4250]
01:05.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RS880 HDMI Audio [Radeon HD 4200 Series]
02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
e4@e4-Presario-CQ61-Notebook-PC:~$ lspciAAModération : merci à l'avenir d'utiliser les balises code (explications ici).
Dernière modification par cqfd93 (Le 04/11/2015, à 09:50)
Hors ligne
#4 Le 04/11/2015, à 09:39
- Massuelles
Re : tni non reconnu
et ce que je trouve quand je tape dmesg:
[ 0.257471] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.257473] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.257475] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.257477] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.257479] pci_bus 0000:04: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.257482] pci_bus 0000:04: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.257484] pci_bus 0000:04: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.257486] pci_bus 0000:04: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.257488] pci_bus 0000:04: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.257490] pci_bus 0000:04: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.257492] pci_bus 0000:04: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.257494] pci_bus 0000:04: resource 17 [mem 0x000ec000-0x000effff]
[ 0.257496] pci_bus 0000:04: resource 18 [mem 0x80000000-0xf6ffffff]
[ 0.257499] pci_bus 0000:04: resource 19 [mem 0xf8000000-0xffffffff]
[ 0.257535] NET: Registered protocol family 2
[ 0.257790] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.257851] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.257927] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.257970] TCP: reno registered
[ 0.257976] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.257993] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.258066] NET: Registered protocol family 1
[ 0.258083] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.619293] pci 0000:01:05.0: Video device with shadowed ROM
[ 0.619306] PCI: CLS 64 bytes, default 64
[ 0.619382] Trying to unpack rootfs image as initramfs...
[ 1.008865] Freeing initrd memory: 19336K (ffff880035a2c000 - ffff880036d0e000)
[ 1.009259] Simple Boot Flag at 0x44 set to 0x1
[ 1.009355] microcode: CPU0: patch_level=0x01000098
[ 1.009409] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.009414] LVT offset 1 assigned for vector 0x400
[ 1.009418] IBS: LVT offset 1 assigned
[ 1.009429] perf: AMD IBS detected (0x0000001f)
[ 1.009455] Scanning for low memory corruption every 60 seconds
[ 1.009757] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.009774] Initialise system trusted keyring
[ 1.009799] audit: initializing netlink subsys (disabled)
[ 1.009819] audit: type=2000 audit(1446622043.908:1): initialized
[ 1.010211] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.011954] zpool: loaded
[ 1.011957] zbud: loaded
[ 1.012205] VFS: Disk quotas dquot_6.5.2
[ 1.012249] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.012834] fuse init (API version 7.23)
[ 1.012983] Key type big_key registered
[ 1.013288] Key type asymmetric registered
[ 1.013292] Asymmetric key parser 'x509' registered
[ 1.013338] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.013405] io scheduler noop registered
[ 1.013409] io scheduler deadline registered (default)
[ 1.013446] io scheduler cfq registered
[ 1.013918] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.013937] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.013976] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 1.013977] vesafb: scrolling: redraw
[ 1.013979] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.014130] vesafb: framebuffer at 0x80000000, mapped to 0xffffc90001400000, using 3072k, total 3072k
[ 1.014264] Console: switching to colour frame buffer device 128x48
[ 1.014286] fb0: VESA VGA frame buffer device
[ 1.015087] ACPI: AC Adapter [ACAD] (off-line)
[ 1.015150] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.015154] ACPI: Power Button [PWRB]
[ 1.015195] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.015198] ACPI: Sleep Button [SLPB]
[ 1.015335] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 1.016186] ACPI: Lid Switch [LID]
[ 1.016230] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.016233] ACPI: Power Button [PWRF]
[ 1.016317] ACPI: acpi_idle registered with cpuidle
[ 1.016904] [Firmware Bug]: Invalid critical threshold (0)
[ 1.018621] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.018623] ACPI: Thermal Zone [THRM] (38 C)
[ 1.018657] GHES: HEST is not enabled!
[ 1.018858] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.020858] Linux agpgart interface v0.103
[ 1.022314] brd: module loaded
[ 1.022963] loop: module loaded
[ 1.023298] libphy: Fixed MDIO Bus: probed
[ 1.023302] tun: Universal TUN/TAP device driver, 1.6
[ 1.023304] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.023353] PPP generic driver version 2.4.2
[ 1.023434] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.023441] ehci-pci: EHCI PCI platform driver
[ 1.023686] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.023694] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.023699] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.023711] ehci-pci 0000:00:12.2: debug port 1
[ 1.023758] ehci-pci 0000:00:12.2: irq 17, io mem 0x90408500
[ 1.035248] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.035318] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.035321] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.035323] usb usb1: Product: EHCI Host Controller
[ 1.035325] usb usb1: Manufacturer: Linux 3.19.0-25-generic ehci_hcd
[ 1.035327] usb usb1: SerialNumber: 0000:00:12.2
[ 1.035497] hub 1-0:1.0: USB hub found
[ 1.035505] hub 1-0:1.0: 6 ports detected
[ 1.036011] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.036020] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.036024] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.036037] ehci-pci 0000:00:13.2: debug port 1
[ 1.036076] ehci-pci 0000:00:13.2: irq 19, io mem 0x90408400
[ 1.037514] ACPI: Battery Slot [BAT0] (battery present)
[ 1.047284] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.047326] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.047328] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.047330] usb usb2: Product: EHCI Host Controller
[ 1.047332] usb usb2: Manufacturer: Linux 3.19.0-25-generic ehci_hcd
[ 1.047334] usb usb2: SerialNumber: 0000:00:13.2
[ 1.047462] hub 2-0:1.0: USB hub found
[ 1.047469] hub 2-0:1.0: 6 ports detected
[ 1.047707] ehci-platform: EHCI generic platform driver
[ 1.047725] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.047731] ohci-pci: OHCI PCI platform driver
[ 1.047954] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.047960] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.047989] ohci-pci 0000:00:12.0: irq 16, io mem 0x90407000
[ 1.107337] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.107339] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.107341] usb usb3: Product: OHCI PCI host controller
[ 1.107343] usb usb3: Manufacturer: Linux 3.19.0-25-generic ohci_hcd
[ 1.107345] usb usb3: SerialNumber: 0000:00:12.0
[ 1.107463] hub 3-0:1.0: USB hub found
[ 1.107505] hub 3-0:1.0: 3 ports detected
[ 1.107774] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 1.107780] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.107803] ohci-pci 0000:00:12.1: irq 16, io mem 0x90406000
[ 1.167345] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.167347] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.167349] usb usb4: Product: OHCI PCI host controller
[ 1.167351] usb usb4: Manufacturer: Linux 3.19.0-25-generic ohci_hcd
[ 1.167353] usb usb4: SerialNumber: 0000:00:12.1
[ 1.167466] hub 4-0:1.0: USB hub found
[ 1.167508] hub 4-0:1.0: 3 ports detected
[ 1.167776] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.167782] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.167812] ohci-pci 0000:00:13.0: irq 18, io mem 0x90405000
[ 1.227362] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.227364] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.227366] usb usb5: Product: OHCI PCI host controller
[ 1.227368] usb usb5: Manufacturer: Linux 3.19.0-25-generic ohci_hcd
[ 1.227370] usb usb5: SerialNumber: 0000:00:13.0
[ 1.227482] hub 5-0:1.0: USB hub found
[ 1.227524] hub 5-0:1.0: 3 ports detected
[ 1.227790] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 1.227796] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.227815] ohci-pci 0000:00:13.1: irq 18, io mem 0x90404000
[ 1.287379] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.287382] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.287384] usb usb6: Product: OHCI PCI host controller
[ 1.287386] usb usb6: Manufacturer: Linux 3.19.0-25-generic ohci_hcd
[ 1.287388] usb usb6: SerialNumber: 0000:00:13.1
[ 1.287516] hub 6-0:1.0: USB hub found
[ 1.287558] hub 6-0:1.0: 3 ports detected
[ 1.287705] ohci-platform: OHCI generic platform driver
[ 1.287724] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.287833] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.307358] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.307363] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.307446] mousedev: PS/2 mouse device common for all mice
[ 1.307650] rtc_cmos 00:01: RTC can wake from S4
[ 1.307764] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.307792] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.307812] i2c /dev entries driver
[ 1.307893] device-mapper: uevent: version 1.0.3
[ 1.307960] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[ 1.307979] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.308839] PCCT header not found.
[ 1.308841] ACPI PCC probe failed.
[ 1.308960] TCP: cubic registered
[ 1.309081] NET: Registered protocol family 10
[ 1.309350] NET: Registered protocol family 17
[ 1.309361] Key type dns_resolver registered
[ 1.309681] Loading compiled-in X.509 certificates
[ 1.310979] Loaded X.509 cert 'Magrathea: Glacier signing key: 6aaa11d18c2d3a40b1b4dbe5bf8ad656ddf51838'
[ 1.310995] registered taskstats version 1
[ 1.313273] Key type trusted registered
[ 1.317377] Key type encrypted registered
[ 1.317390] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.317395] ima: No TPM chip found, activating TPM-bypass!
[ 1.317428] evm: HMAC attrs: 0x1
[ 1.317792] Magic number: 7:995:469
[ 1.317926] rtc_cmos 00:01: setting system clock to 2015-11-04 07:27:24 UTC (1446622044)
[ 1.318006] acpi-cpufreq: overriding BIOS provided _PSD data
[ 1.318049] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.318050] EDD information not available.
[ 1.318144] PM: Hibernation image not present or could not be loaded.
[ 1.318695] Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
[ 1.318699] Write protecting the kernel read-only data: 12288k
[ 1.318959] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
[ 1.319114] Freeing unused kernel memory: 344K (ffff880001baa000 - ffff880001c00000)
[ 1.327587] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.343567] systemd-udevd[95]: starting version 204
[ 1.363469] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 1.405860] ahci 0000:00:11.0: version 3.0
[ 1.406155] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.406160] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.408597] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.408611] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.409025] r8169 0000:03:00.0 eth0: RTL8102e at 0xffffc900013ea000, c8:0a:a9:bd:c8:53, XID 04c00000 IRQ 26
[ 1.414003] scsi host0: ahci
[ 1.422824] scsi host1: ahci
[ 1.422942] ata1: SATA max UDMA/133 abar m1024@0x90408000 port 0x90408100 irq 22
[ 1.422946] ata2: SATA max UDMA/133 abar m1024@0x90408000 port 0x90408180 irq 22
[ 1.532620] usb 1-3: New USB device found, idVendor=04f2, idProduct=b153
[ 1.532626] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.532629] usb 1-3: Product: CNF8060
[ 1.532631] usb 1-3: Manufacturer: Chicony Electronics Co., Ltd.
[ 1.532633] usb 1-3: SerialNumber: SN0001
[ 1.911549] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.912391] ata1.00: ATA-8: Hitachi HTS725025A9A364, PC2OC72E, max UDMA/100
[ 1.912393] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.913449] ata1.00: configured for UDMA/100
[ 1.913586] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72502 C72E PQ: 0 ANSI: 5
[ 1.914013] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.914063] sd 0:0:0:0: [sda] Write Protect is off
[ 1.914066] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.914086] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.914678] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.915558] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.934663] ata2.00: ATAPI: hp CDDVDW TS-L633N, 0300, max UDMA/100
[ 1.954409] ata2.00: configured for UDMA/100
[ 1.957006] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-L633N 0300 PQ: 0 ANSI: 5
[ 1.958940] sda: sda1 sda2 < sda5 >
[ 1.959371] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.978222] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.978225] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.978665] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.978783] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.008542] tsc: Refined TSC clocksource calibration: 2094.681 MHz
[ 2.254251] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.357111] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0, board id: 0, fw id: 428212
[ 2.426746] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 2.818331] random: init urandom read with 89 bits of entropy available
[ 3.007885] Switched to clocksource tsc
[ 3.347595] random: nonblocking pool is initialized
[ 11.173188] Adding 1829884k swap on /dev/sda5. Priority:-1 extents:1 across:1829884k FS
[ 11.398412] systemd-udevd[264]: starting version 204
[ 11.600009] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.605464] lp: driver loaded but no devices found
[ 11.622147] ppdev: user-space parallel port driver
[ 11.654027] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 11.733924] wmi: Mapper loaded
[ 11.775333] acpi device:03: registered as cooling_device1
[ 11.783908] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input8
[ 11.815502] [drm] Initialized drm 1.1.0 20060810
[ 11.825926] cfg80211: Calling CRDA to update world regulatory domain
[ 11.831211] audit: type=1400 audit(1446622055.007:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=318 comm="apparmor_parser"
[ 11.831220] audit: type=1400 audit(1446622055.007:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=318 comm="apparmor_parser"
[ 11.831226] audit: type=1400 audit(1446622055.007:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=318 comm="apparmor_parser"
[ 11.831832] audit: type=1400 audit(1446622055.007:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=318 comm="apparmor_parser"
[ 11.831839] audit: type=1400 audit(1446622055.007:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=318 comm="apparmor_parser"
[ 11.832163] audit: type=1400 audit(1446622055.007:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=318 comm="apparmor_parser"
[ 11.908006] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\_SB_.PCI0.SMBS.SMBI) (20141107/utaddress-258)
[ 11.908016] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.973999] MCE: In-kernel MCE decoding enabled.
[ 11.985883] EDAC MC: Ver: 3.0.0
[ 12.012928] AMD64 EDAC driver v3.4.0
[ 12.012973] EDAC amd64: DRAM ECC disabled.
[ 12.012977] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 12.012977] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 12.012977] (Note that use of the override may cause unknown side effects.)
[ 12.166863] ath: phy0: Enable LNA combining
[ 12.211090] ath: phy0: ASPM enabled: 0x43
[ 12.211096] ath: EEPROM regdomain: 0x60
[ 12.211098] ath: EEPROM indicates we should expect a direct regpair map
[ 12.211101] ath: Country alpha2 being used: 00
[ 12.211102] ath: Regpair used: 0x60
[ 12.341676] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input9
[ 12.342824] sound hdaudioC0D0: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 12.342839] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.342842] sound hdaudioC0D0: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[ 12.342844] sound hdaudioC0D0: mono: mono_out=0x0
[ 12.342846] sound hdaudioC0D0: inputs:
[ 12.342848] sound hdaudioC0D0: Internal Mic=0xc
[ 12.342850] sound hdaudioC0D0: Mic=0xb
[ 12.349882] [drm] radeon kernel modesetting enabled.
[ 12.357553] kvm: disabled by bios
[ 12.359292] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 12.359413] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 12.364194] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.364851] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90001720000, irq=17
[ 12.369323] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 12.369328] AMD IOMMUv2 functionality not available on this system
[ 12.379179] CRAT table not found
[ 12.379184] Finished initializing topology ret=0
[ 12.384852] kfd kfd: Initialized module
[ 12.385470] checking generic (80000000 300000) vs hw (80000000 10000000)
[ 12.385474] fb: switching to radeondrmfb from VESA VGA
[ 12.385500] Console: switching to colour dummy device 80x25
[ 12.386786] [drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x103C:0x363F).
[ 12.386806] [drm] register mmio base: 0x90300000
[ 12.386808] [drm] register mmio size: 65536
[ 12.387537] ATOM BIOS: HP_RavLas20
[ 12.387560] radeon 0000:01:05.0: VRAM: 336M 0x00000000C0000000 - 0x00000000D4FFFFFF (336M used)
[ 12.387563] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 12.387567] [drm] Detected VRAM RAM=336M, BAR=256M
[ 12.387569] [drm] RAM width 32bits DDR
[ 12.394614] [TTM] Zone kernel: Available graphics memory: 893806 kiB
[ 12.394618] [TTM] Initializing pool allocator
[ 12.394625] [TTM] Initializing DMA pool allocator
[ 12.394655] [drm] radeon: 336M of VRAM memory ready
[ 12.394656] [drm] radeon: 512M of GTT memory ready.
[ 12.394678] [drm] Loading RS780 Microcode
[ 12.413887] media: Linux media interface: v0.10
[ 12.498787] Linux video capture interface: v2.00
[ 12.726779] [drm] radeon: power management initialized
[ 12.752694] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 12.777811] [drm] PCIE GART of 512M enabled (table at 0x00000000C0258000).
[ 12.825011] radeon 0000:01:05.0: WB enabled
[ 12.825020] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff880069b62c00
[ 12.830629] radeon 0000:01:05.0: fence driver on ring 5 use gpu addr 0x00000000c0056038 and cpu addr 0xffffc90001496038
[ 12.879421] uvcvideo: Found UVC 1.00 device CNF8060 (04f2:b153)
[ 12.883285] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.883290] [drm] Driver supports precise vblank timestamp query.
[ 12.883296] radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[ 12.883312] [drm] radeon: irq initialized.
[ 12.933131] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 12.939599] input: CNF8060 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input13
[ 12.941089] usbcore: registered new interface driver uvcvideo
[ 12.941094] USB Video Class driver (1.1.1)
[ 12.960880] [drm] ring test on 0 succeeded in 1 usecs
[ 13.354981] input: HP WMI hotkeys as /devices/virtual/input/input12
[ 13.421197] cfg80211: World regulatory domain updated:
[ 13.421203] cfg80211: DFS Master region: unset
[ 13.421205] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 13.421208] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 13.421211] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 13.421213] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 13.421215] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 13.421217] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 13.659480] [drm] ring test on 5 succeeded in 1 usecs
[ 13.659489] [drm] UVD initialized successfully.
[ 13.659643] [drm] ib test on ring 0 succeeded in 0 usecs
[ 13.840722] init: failsafe main process (533) killed by TERM signal
[ 14.319140] [drm] ib test on ring 5 succeeded
[ 14.327485] [drm] radeon atom DIG backlight initialized
[ 14.327490] [drm] Radeon Display Connectors
[ 14.327492] [drm] Connector 0:
[ 14.327494] [drm] VGA-1
[ 14.327497] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 14.327498] [drm] Encoders:
[ 14.327499] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 14.327500] [drm] Connector 1:
[ 14.327501] [drm] LVDS-1
[ 14.327503] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 14.327504] [drm] Encoders:
[ 14.327506] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 14.327507] [drm] Connector 2:
[ 14.327508] [drm] HDMI-A-1
[ 14.327509] [drm] HPD1
[ 14.327511] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 14.327512] [drm] Encoders:
[ 14.327513] [drm] DFP1: INTERNAL_UNIPHY
[ 14.367702] Bluetooth: Core ver 2.20
[ 14.367758] NET: Registered protocol family 31
[ 14.367760] Bluetooth: HCI device and connection manager initialized
[ 14.368115] Bluetooth: HCI socket layer initialized
[ 14.368120] Bluetooth: L2CAP socket layer initialized
[ 14.368128] Bluetooth: SCO socket layer initialized
[ 14.379964] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.379970] Bluetooth: BNEP filters: protocol multicast
[ 14.379977] Bluetooth: BNEP socket layer initialized
[ 14.458804] audit: type=1400 audit(1446622057.631:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=621 comm="apparmor_parser"
[ 14.458815] audit: type=1400 audit(1446622057.631:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=621 comm="apparmor_parser"
[ 14.463313] Bluetooth: RFCOMM TTY layer initialized
[ 14.463325] Bluetooth: RFCOMM socket layer initialized
[ 14.463335] Bluetooth: RFCOMM ver 1.11
[ 14.465575] audit: type=1400 audit(1446622057.639:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=621 comm="apparmor_parser"
[ 14.652080] init: cups main process (624) killed by HUP signal
[ 14.652095] init: cups main process ended, respawning
[ 14.918342] audit: type=1400 audit(1446622058.091:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=686 comm="apparmor_parser"
[ 15.202246] [drm] fb mappable at 0x80359000
[ 15.202251] [drm] vram apper at 0x80000000
[ 15.202253] [drm] size 4325376
[ 15.202254] [drm] fb depth is 24
[ 15.202255] [drm] pitch is 5632
[ 15.202491] fbcon: radeondrmfb (fb0) is primary device
[ 15.202569] Console: switching to colour frame buffer device 170x48
[ 15.202601] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 15.202604] radeon 0000:01:05.0: registered panic notifier
[ 15.202623] [drm] Initialized radeon 2.40.0 20080528 for 0000:01:05.0 on minor 0
[ 15.399943] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.428636] r8169 0000:03:00.0 eth0: link down
[ 15.438542] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.069434] init: plymouth-upstart-bridge main process ended, respawning
[ 19.098211] init: plymouth-upstart-bridge main process ended, respawning
[ 22.328037] init: anacron main process (831) killed by TERM signal
[ 41.567108] usb 5-3: new full-speed USB device number 2 using ohci-pci
[ 41.734226] usb 5-3: New USB device found, idVendor=0b8c, idProduct=0069
[ 41.734232] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 41.734235] usb 5-3: Product: Touchscreen
[ 41.734237] usb 5-3: Manufacturer: NextWindow
[ 41.787986] hidraw: raw HID events driver (C) Jiri Kosina
[ 41.798528] usbcore: registered new interface driver usbhid
[ 41.798534] usbhid: USB HID core driver
[ 41.812807] hid-generic 0003:0B8C:0069.0001: hiddev0,hidraw0: USB HID v1.11 Device [NextWindow Touchscreen] on usb-0000:00:13.0-3/input1
[ 44.605250] audit_printk_skb: 159 callbacks suppressed
[ 44.605255] audit: type=1400 audit(1446622087.771:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1854 comm="apparmor_parser"
[ 44.605267] audit: type=1400 audit(1446622087.771:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1854 comm="apparmor_parser"
[ 44.605850] audit: type=1400 audit(1446622087.771:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1854 comm="apparmor_parser"
[ 343.688532] r8169 0000:03:00.0 eth0: link up
[ 343.688555] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 560.856005] audit: type=1400 audit(1446622603.766:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2862 comm="apparmor_parser"
[ 560.856019] audit: type=1400 audit(1446622603.766:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2862 comm="apparmor_parser"
[ 560.864279] audit: type=1400 audit(1446622603.778:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2862 comm="apparmor_parser"
e4@e4-Presario-CQ61-Notebook-PC:~$ Merci pour l'aide!!!!
Modération : merci à l'avenir d'utiliser les balises code (explications ici).
Dernière modification par cqfd93 (Le 04/11/2015, à 09:51)
Hors ligne
#5 Le 04/11/2015, à 10:13
- Compte supprimé
Re : tni non reconnu
Bonjour,
cyberesprit a écrit :
Par contre si tu pouvais aussi donner plus d'information sur le TNI, comme le modèle par exemple pour commencer, ce serait plus facile pour d'éventuelles recherches.
#6 Le 04/11/2015, à 10:18
- cyberesprit
Re : tni non reconnu
Ha pardon, question d'habitude, c'était « lsusb » qui nous interpelle ici, pardon pour cette erreur ;-(
Pour dmesg, à priori (si je me trompe pas mais il me faut la réponse à lsusb pour le vérifier) ces lignes seraient concernées :
[ 41.567108] usb 5-3: new full-speed USB device number 2 using ohci-pci
[ 41.734226] usb 5-3: New USB device found, idVendor=0b8c, idProduct=0069
[ 41.734232] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 41.734235] usb 5-3: Product: Touchscreen
[ 41.734237] usb 5-3: Manufacturer: NextWindow
[ 41.787986] hidraw: raw HID events driver (C) Jiri Kosina
[ 41.798528] usbcore: registered new interface driver usbhid
[ 41.798534] usbhid: USB HID core driverPour m'aider, à quoi sont censé servir :
- le port ethernet ?
- le port usb ?
Là je vois que ça parle de « touchscreen », donc de tactile, est-ce que le port usb doit servir à ça ?
Et donc le stylo en question n'a aucune importance technique, c'est comme utiliser un doigt (et ça c'est tant mieux).
Comment on affiche sur ce TNI ? Il y a également un ou plusieurs ports vidéos (vga, dvi ou hdmi) ?
Merci pour ces précisions.
Dernière modification par cyberesprit (Le 04/11/2015, à 10:24)
Cyberesprit, libriste militant
Hors ligne
#7 Le 05/11/2015, à 09:44
- Massuelles
Re : tni non reconnu
Je n'arrive pas vraiment à avoir des infos sur le tni , il y a écrit smart board DVTI. Le rétro projecteur est un Sanyo mais je suppose que ce n'est pas ce qui est important.
Hors ligne
#8 Le 05/11/2015, à 09:46
- Compte supprimé
Re : tni non reconnu
#9 Le 05/11/2015, à 11:05
- cyberesprit
Re : tni non reconnu
Ok donc le problème n'est pas d’afficher à l'écran du TNI mais seulement que la partie tactile n'est pas fonctionnelle, c'est bien ça ? (vu que ce n'est pas précisé dans la question)
Cyberesprit, libriste militant
Hors ligne
#10 Le 05/11/2015, à 18:15
- Massuelles
Re : tni non reconnu
Oui Tamarou ca ressemble vraiment à celui la!
Oui cyberesprit, le problème est effectivement que la fonction tactile ne marche pas, on peut effectivement voir l'écran open sankore mais pas agir... Je me suis effectivement mal exprimé.
Merci pour l'aide, ca fait plaisir, c'est vraiment sympa.
Hors ligne
#11 Le 05/11/2015, à 20:05
- Compte supprimé
Re : tni non reconnu
Pour compléter il faudrait répondre aussi à la question de cyberesprit : quel est le retour de la commande ci-dessous quand le tableau est branché.
lsusbon peut effectivement voir l'écran open sankore
C'est l'écran du PC projeté par le videoprojecteur ?
Par contre si tu écris avec ton doigt sur le tableau, rien ne s'affiche ?
La doc Ubuntu a écrit :
Sur la gauche de l'écran, une palette outils Dessin/gomme/crayon/zoom/galerie qui permet de rapidement modifier le comportement du curseur sous le stylo numérique, et donc d'écrire comme sur un tableau noir, dessiner, effacer, déplacer…
https://doc.ubuntu-fr.org/sankore
Voir si la bonne palette est activée.
Dernière modification par Compte supprimé (Le 05/11/2015, à 20:15)
#12 Le 06/11/2015, à 09:43
- Massuelles
Re : tni non reconnu
Avec la souris ca marche mais pas avec le crayon du tni ou le doigt ...
Dernière modification par Massuelles (Le 06/11/2015, à 09:44)
Hors ligne
#13 Le 06/11/2015, à 10:04
- Compte supprimé
Re : tni non reconnu
Pour compléter il faudrait répondre aussi à la question de cyberesprit : quel est le retour de la commande ci-dessous quand le tableau est branché.
lsusb#14 Le 06/11/2015, à 13:38
- moko138
Re : tni non reconnu
Et ça fait 3 fois, et 2 jours, qu'on te le demande !
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
Pages : 1