Pages : 1
#1 Le 07/11/2015, à 08:47
- Oni_Shadow
trackpad capricieux
Bonjour,
Sur mon ordinateur, j'ai un soucis de tracpas : à l'allumage celui ci fonction ou pas, et s'il à décidé de ne pas fonctionner, je suis obligé de mettre mon ordinateur en veil et d'en sortif afin de l'activé.
J'ai lu de la doc et le problème semblait être du à l'incapacité des précédents noyeaux, mais étant à jour
$ uname -r
4.2.0-16-generic
Je ne comprend pas bien.
Pour les anglophone, voici le post résumant le mieux mon soucis
This won't help, but only to provide some info about what's happening.
The latest "Precision touch pad" (PTP) devices, which were developed according to Microsoft's PTP spec for Windows 8, are i2c devices. But, they also have a required fallback to PS/2 mode, which allows them to work with non-i2c-aware OSes.
In PTP mode (i2c), the device simply reports three to five individual X/Y coordinates for touch. No relative mouse data is reported. Windows 8 (and other driver-supported OSes) use these points to either compute a relative mouse delta (single point) or gestures.
In PS/2 mode, obviously, it works like a normal touchpad.
The problem here is that Linux is i2c-aware, but does not have the proper driver to get the HID report descriptor and other necessary data to work with the PTP device. The attempt to work with the i2c device fails, but the device is stuck in i2c mode and won't respond to the Synaptics PS/2 driver.
I have this same laptop, and am going to attempt to install Linux Mint 17 (after I finish imaging the stock install with G4L) I will attempt the 'blacklist i2c-hid' solution/workaround described here:
http://trustdarkness.com/wordpress/dell … buntumint/
...and see what happens...
[UPDATE]
The touchpad is working with the blacklist entry (and the touch screen continues to work as well). This is not an ideal solution, because a PTP touchpad running over an i2c bus is capable of so much more than a simple PS/2 touchpad. But, I'm hopeful we'll get a proper driver for i2c and be able to use the full capabilities in Linux soon.
[UPDATE 2]
Doing more research, I found out that the clickpad is part of Synaptics' RMI4 line of products, and the latest kernels have driver support. So, I followed this guide to downloading, building and installing the latest Linux kernel:
http://forums.linuxmint.com/viewtopic.php?f=42&t=131433
After installing, and before rebooting, remove the blacklist entry you created for the clickpad. Reboot, and... now it works better.
The acceleration and speed settings will need to be readjusted, but I've found that tapping and two-finger scrolling works MUCH better in i2c mode than PS/2.
On a side note, the newer kernel/driver for the Intel wireless module in this laptop also seems to provide better performance than what I had in place before.
Source ici
Mon ordinateur est un dell inspiron 13 7000 series.
Blacklister i2c-hid devrait fonctionner, mais si je pouvais éviter, je préfèrerais... i2c apportant quand meme du mieux
pour finir, un petit
$ sudo xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=12 [slave pointer (2)]
⎜ ↳ ELAN Touchscreen Pen id=15 [slave pointer (2)]
⎜ ↳ ELAN Touchscreen id=16 [slave pointer (2)]
⎜ ↳ DLL0675:00 06CB:75DB UNKNOWN id=17 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ Integrated_Webcam_HD id=10 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)]
↳ Dell WMI hotkeys id=13 [slave keyboard (3)]
↳ DELL Wireless hotkeys id=14 [slave keyboard (3)]
Modération
Bonjour,
Si c'est le Dell de ta signature, c'est la version en développement (16.04), on n'en assure pas encore le support dans les sections générales.
Dernière modification par cqfd93 (Le 07/11/2015, à 13:31)
Rouillé
Hors ligne
Pages : 1