Pages : 1
#1 Le 18/11/2015, à 15:12
- valino
instal ubuntu 14.04.3 sur HP pavilion 23
bonjour
j'essaie d'installer la version 14.04.3 sur un HP Pavilion 23-G350NF (acheté l'an dernier)
ordinateur tout en un, initialement sous W8, puis maj en W10
ayant installé avec succes ubuntu 14.04 LTS sur de vieux portables Acer et Toshiba il y a 2 ans, j'ai fait directement une installation totale avec supression de windows (et sans aucun moyen de revenir en arrière ...:(
hier : tentatives avortées d'installer une version 12.04 et une 14.04 (francophone) le disque dur n'est pas reconnu (erreur de periphérique d'amorçage introuvable...) seule l'installation live cd donne quelque chose
aujourd'hui :
j'ai gravé sur dvd la version internationale a priori censée éviter les soucis avec l'UEFI
donc 14.04.3_desktop_amd64.iso
dans le BIOS j'ai juste désactivé l'amorçage rapide
je retombe sur les mêmes soucis :
Périphérique d'amorçage introuvable
Veuillez installer un système d'exploitation sur votre disque dur.
Disque dur - (3F0)
F2 diagnostics du système
Pour en savoir plus veuillez consulter http://www.hp.com/go/techcenter/startup
Pour info, mon rapport Boot_Info : http://paste.ubuntu.com/13331049/
la solution est elle dans de fil (au #13) ?
https://forum.ubuntu-fr.org/viewtopic.php?id=1590381 ??
merci de votre aide
Dernière modification par valino (Le 18/11/2015, à 18:14)
Hors ligne
#2 Le 19/11/2015, à 09:55
- malbo
Re : instal ubuntu 14.04.3 sur HP pavilion 23
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 1,945,358,335 1,944,307,712 Data partition (Linux)
/dev/sda3 1,945,358,336 1,953,523,711 8,165,376 Swap partition (Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 5DDB-A70A vfat
/dev/sda2 d5f47e0a-9bd4-44be-aba3-3217be6225bb ext4
/dev/sda3 8c41a5d5-c08f-4138-a581-9d780d6c29de swap
/dev/sr0 iso9660 Ubuntu 14.04.3 LTS amd64
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Nov 18 15:38 ata-ST1000DM003-1CH162_Z1DAAMCA -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 18 14:18 ata-ST1000DM003-1CH162_Z1DAAMCA-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Nov 18 14:18 ata-ST1000DM003-1CH162_Z1DAAMCA-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Nov 18 14:18 ata-ST1000DM003-1CH162_Z1DAAMCA-part3 -> ../../sda3
lrwxrwxrwx 1 root root 9 Nov 18 14:18 ata-hp_CDDVDW_SN-208FB_S11N6YAF3000L6 -> ../../sr0
lrwxrwxrwx 1 root root 9 Nov 18 15:38 wwn-0x5000c50066571ba6 -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 18 14:18 wwn-0x5000c50066571ba6-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Nov 18 14:18 wwn-0x5000c50066571ba6-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Nov 18 14:18 wwn-0x5000c50066571ba6-part3 -> ../../sda3
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sr0 /cdrom iso9660 (ro,noatime)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 d5f47e0a-9bd4-44be-aba3-3217be6225bb
else
search --no-floppy --fs-uuid --set=root d5f47e0a-9bd4-44be-aba3-3217be6225bb
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d5f47e0a-9bd4-44be-aba3-3217be6225bb' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 d5f47e0a-9bd4-44be-aba3-3217be6225bb
else
search --no-floppy --fs-uuid --set=root d5f47e0a-9bd4-44be-aba3-3217be6225bb
fi
linux /boot/vmlinuz-3.19.0-33-generic.efi.signed root=UUID=d5f47e0a-9bd4-44be-aba3-3217be6225bb ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.19.0-33-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-d5f47e0a-9bd4-44be-aba3-3217be6225bb' {
menuentry 'Ubuntu, avec Linux 3.19.0-33-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-33-generic-advanced-d5f47e0a-9bd4-44be-aba3-3217be6225bb' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 d5f47e0a-9bd4-44be-aba3-3217be6225bb
else
search --no-floppy --fs-uuid --set=root d5f47e0a-9bd4-44be-aba3-3217be6225bb
fi
echo 'Chargement de Linux 3.19.0-33-generic…'
linux /boot/vmlinuz-3.19.0-33-generic.efi.signed root=UUID=d5f47e0a-9bd4-44be-aba3-3217be6225bb ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.19.0-33-generic
}
menuentry 'Ubuntu, with Linux 3.19.0-33-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-33-generic-recovery-d5f47e0a-9bd4-44be-aba3-3217be6225bb' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 d5f47e0a-9bd4-44be-aba3-3217be6225bb
else
search --no-floppy --fs-uuid --set=root d5f47e0a-9bd4-44be-aba3-3217be6225bb
fi
echo 'Chargement de Linux 3.19.0-33-generic…'
linux /boot/vmlinuz-3.19.0-33-generic.efi.signed root=UUID=d5f47e0a-9bd4-44be-aba3-3217be6225bb ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.19.0-33-generic
}
menuentry 'Ubuntu, avec Linux 3.19.0-25-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-25-generic-advanced-d5f47e0a-9bd4-44be-aba3-3217be6225bb' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 d5f47e0a-9bd4-44be-aba3-3217be6225bb
else
search --no-floppy --fs-uuid --set=root d5f47e0a-9bd4-44be-aba3-3217be6225bb
fi
echo 'Chargement de Linux 3.19.0-25-generic…'
linux /boot/vmlinuz-3.19.0-25-generic root=UUID=d5f47e0a-9bd4-44be-aba3-3217be6225bb ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.19.0-25-generic
}
menuentry 'Ubuntu, with Linux 3.19.0-25-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-25-generic-recovery-d5f47e0a-9bd4-44be-aba3-3217be6225bb' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 d5f47e0a-9bd4-44be-aba3-3217be6225bb
else
search --no-floppy --fs-uuid --set=root d5f47e0a-9bd4-44be-aba3-3217be6225bb
fi
echo 'Chargement de Linux 3.19.0-25-generic…'
linux /boot/vmlinuz-3.19.0-25-generic root=UUID=d5f47e0a-9bd4-44be-aba3-3217be6225bb ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.19.0-25-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=d5f47e0a-9bd4-44be-aba3-3217be6225bb / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=5DDB-A70A /boot/efi vfat defaults 0 1
# swap was on /dev/sda3 during installation
UUID=8c41a5d5-c08f-4138-a581-9d780d6c29de none swap sw 0 0
--------------------------------------------------------------------------------
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/4192/mounts) leaked on lvs invocation. Parent PID 10298: bash
File descriptor 63 (pipe:[47583]) leaked on lvs invocation. Parent PID 10298: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-info 2015-11-18__15h38 ===================
boot-info version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-info is executed in live-session (Ubuntu 14.04.3 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
ls: cannot access /home/usr/.config: No such file or directory
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda2:Ubuntu 14.04.3 LTS (14.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="5DDB-A70A" TYPE="vfat"
/dev/sda2: UUID="d5f47e0a-9bd4-44be-aba3-3217be6225bb" TYPE="ext4"
/dev/sda3: UUID="8c41a5d5-c08f-4138-a581-9d780d6c29de" TYPE="swap"
/dev/sr0: LABEL="Ubuntu 14.04.3 LTS amd64" TYPE="iso9660"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== sda2/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Nov 18 08:41 grub.d
total 76
-rwxr-xr-x 1 root root 9424 Jun 26 11:16 00_header
-rwxr-xr-x 1 root root 6058 May 13 2015 05_debian_theme
-rwxr-xr-x 1 root root 11608 Jun 26 11:16 10_linux
-rwxr-xr-x 1 root root 10412 Jun 26 11:16 20_linux_xen
-rwxr-xr-x 1 root root 1992 Mar 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 Jun 26 11:16 30_os-prober
-rwxr-xr-x 1 root root 1416 Jun 26 11:16 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Jun 26 11:16 40_custom
-rwxr-xr-x 1 root root 216 Jun 26 11:16 41_custom
-rw-r--r-- 1 root root 483 Jun 26 11:16 README
=================== sda2/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=5DDB-A70A (sda1)
=================== efibootmgr -v
BootCurrent: 0008
Timeout: 0 seconds
BootOrder: 0001,0002,0003,0008,0004,0005,0006,0007,0000
Boot0000* ubuntu Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)
Boot0001* USB Floppy/CD Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)..BO
Boot0002* USB Hard Drive Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)..BO
Boot0003* ATAPI CD-ROM Drive Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0300000001)..BO
Boot0004* CD/DVD Drive BIOS(3,0,00)..GO..NO........O.h.p. . . . . . . .C.D.D.V.D.W. .S.N.-.2.0.8.F.B.................>..Gd-.;.A..MQ..L.1.S.N.1.Y.6.F.A.0.3.0.0.6.L. . . . . . ........BO
Boot0005* USB Floppy/CD Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000000)..BO
Boot0006* Hard Drive BIOS(2,0,00)..GO..NO........O.S.T.1.0.0.0.D.M.0.0.3.-.1.C.H.1.6.2.................>..Gd-.;.A..MQ..L.1.Z.A.D.M.A.A.C. . . . . . . . . . . . ........BO
Boot0007* Realtek PXE B05 D00 BIOS(6,0,00)..BO
Boot0008* UEFI: hp CDDVDW SN-208FB ACPI(a0341d0,0)PCI(1f,2)03120a000100ffff0000CD-ROM(1,7c6fa,11c0)..BO
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA ST1000DM003-1CH1 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB fat32 boot
2 538MB 996GB 995GB ext4
3 996GB 1000GB 4181MB linux-swap(v1)
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
Error: Can't have a partition outside the disk!
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA ST1000DM003-1CH1;
1:1049kB:538MB:537MB:fat32::boot;
2:538MB:996GB:995GB:ext4::;
3:996GB:1000GB:4181MB:linux-swap(v1)::;
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
Error: Can't have a partition outside the disk!
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 931.5G ST1000DM
sda1 part vfat 512M 5DDB-A70A
sda2 part ext4 927.1G d5f47e0a-9bd4-44be-aba3-3217be6225bb
sda3 part swap 3.9G 8c41a5d5-c08f-4138-a581-9d780d6c29de
sr0 rom iso9660 1006M Ubuntu 14.04.3 LTS amd64
CDDVDW S
loop0 loop squashfs 962.1M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0 /mnt/boot-sav/sda2
sda3 1 0 0 [SWAP]
sr0 1 0 1 running /cdrom
loop0 1 1 0 /rofs
=================== mount:
/cow on / type overlay (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 input kmsg log mapper mcelog media0 mei0 mem memory_bandwidth net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 fe 03 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 0a a7 db 5d 4e 4f 20 4e 41 4d 45 20 20 |..)...]NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlay 1.9G 84M 1.8G 5% /
udev devtmpfs 1.9G 12K 1.9G 1% /dev
tmpfs tmpfs 385M 1.3M 384M 1% /run
/dev/sr0 iso9660 1006M 1006M 0 100% /cdrom
/dev/loop0 squashfs 963M 963M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 1.9G 1.4M 1.9G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.9G 76K 1.9G 1% /run/shm
none tmpfs 100M 56K 100M 1% /run/user
/dev/sda1 vfat 511M 3.4M 508M 1% /mnt/boot-sav/sda1
/dev/sda2 ext4 913G 4.5G 862G 1% /mnt/boot-sav/sda2
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x5285dfe0
Device Boot Start End Blocks Id System
/dev/sda1 1 1953525167 976762583+ ee GPT
Partition 1 does not start on physical sector boundary.
Partition outside the disk detected.
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file rename-ms-efi
=================== User settings
The settings chosen by the user will not act on the boot.
Tout est parfait : Ubuntu est bien installé, le Boot-Info a été fait depuis une session démarrée en mode EFI, c'est génial. Alors pourquoi ça ne marche pas ? Parce que HP verrouille le démarrage de ses ordis sur Windows. Et quand on supprime Windows, le système UEFI en barreaux de prison utilisé par HP déclare qu'il n'y a pas de périphérique d'amorçage. Elle est pas belle la vie ?
La solution consiste à abandonner le mode de démarrage EFI bridé par HP au profit du mode non-EFI qui n'est pas bridé. Cette solution est décrite dans "EDIT" en bas de ce post : http://forum.ubuntu-fr.org/viewtopic.ph … #p19002741
Je la colle ici :
EDIT : la procédure peut se formaliser ainsi :
1) dans l'UEFI (dans le nouveau "Bios"), désactiver "Fast Boot" (le cas échéant), désactiver "Secure Boot" et passer le "Boot Mode" sur "Legacy" au lieu de "UEFI" (chez certains fabricants, il faut activer "Launch CSM" qui est l'équivalent de "Legacy")
2) lancer l'installation de Ubuntu. A l'étape "Type d'installation", sélectionner le mode automatique qui écrase tout ce qui existe sur le disque dur pour installer Ubuntu. Pitié, ne PAS cocher la case "Chiffrer la nouvelle installation de Ubuntu pour la sécurité et ne PAS cocher la case "Utiliser LVM pour la nouvelle installation de Ubuntu" : ce sont des fonctionnalités merdiques.
Dernière modification par malbo (Le 19/11/2015, à 10:09)
Hors ligne
#3 Le 19/11/2015, à 10:54
- valino
Re : instal ubuntu 14.04.3 sur HP pavilion 23
merci , ça commence à devenir plus clair . pour le moment ma femme a préferré tenter de faire réinstaller w7 chez un informaticien . Si ça n'est pas concluant, je testerai la procédure de bootage en non EFI
D'apres mes quelques investigations dans le bios de cet ordi, je ne me souviens pas d'avoir eu accès à autant de rubriques dans les menus et sous menus. En tout cas pas de quoi désactiver l'EFI mais sans doute ai je mal regardé...
je vous tiendrai au courant asap
Hors ligne
#4 Le 19/11/2015, à 11:11
- malbo
Re : instal ubuntu 14.04.3 sur HP pavilion 23
pour le moment ma femme a préféré tenter de faire réinstaller w7 chez un informaticien
Il faudrait que cet informaticien sache comment faire pour installer Windows 7 en mode non-EFI dans un ordi préinstallé Windows 8 : ce n'est pas gagné. La procédure est la suivante :
1) passer le "Boot Mode" en non-EFI (c'est ce que j'explique à la fin de mon post précédent)
2) Depuis une session live de Ubuntu, s'assurer que la session est bien démarrée en mode non-EFI (méthode d'identification) (*) puis lancer Gparted pour créer une nouvelle table de partition du type MSDOS (au lieu du type GPT actuel) : tout ce qu'il y a actuellement sur le disque sera évidemment écrasé. Il est possible de faire cela depuis le DVD d'installation de Windows mais c'est plus compliqué à mon goût.
3) installer Windows 7 en mode automatique (c'est l'installateur qui créera les partitions sur le disque dur) : il s'installera forcément en mode non-EFI - du fait que le "Boot Mode" a été passé en non-EFI - et c'est ce qui convient.
(*) il y a aussi la méthode du § 2.4 qui convient pour s'assurer que la session est bien démarrée en mode non-EFI. S'il s'avère que la session est EFI, ce n'est pas la peine de continuer plus loin parce que l'installation de Windows 7 sera faite en mode EFI et ça ne convient pas du tout. Il faudra que tu te débrouilles pour paramétrer ton système UEFI pour parvenir à obtenir effectivement le Boot Mode en non-EFI.
Dernière modification par malbo (Le 19/11/2015, à 11:25)
Hors ligne
#5 Le 20/11/2015, à 01:21
- Bougron
Re : instal ubuntu 14.04.3 sur HP pavilion 23
Bonsoir
Je ne te comprend absolument pas.
Tu as windows sur ta machine EFI, tu fais une mise à jour windows 10
Je n'arrive pas à comprendre que tu supprimes tout pour installer ubuntu14.04
Puis comme cela ne marche pas, tu regardes distraitement dans le forum.
et tu décides d'installer ubuntu 12
comme cela ne marche pas tu décides de faire installer windows 7 qui sera bien entendu en legacy.
C'est ton droit, Mais jamais tu ne repasseras facilement windows 10.
Pourtant, Si tu ne veux pas de windows, tu aurais pu très facilement dire que ubuntu est windows.
La solution a été expliquée dans le post que tu signales dont je rappelle la conclusion https://forum.ubuntu-fr.org/viewtopic.p … #p17068401
De plus si tu veux un dual boot EFI, c'est bricolable en continuant de dire que UBUNTU c'est WINDOWS et windows c'est un pirate.
http://forum.ubuntu-fr.org/viewtopic.ph … #p17109561 ou https://forum.ubuntu-fr.org/viewtopic.p … #p20893581
Il est vrai que dans ce cas, être legacy est plus simple.
Dernière modification par Bougron (Le 20/11/2015, à 01:35)
Hors ligne
#6 Le 23/11/2015, à 01:35
- valino
Re : instal ubuntu 14.04.3 sur HP pavilion 23
bon j'ai récupéré le PC réinstallé en W7 et qui fonctionne parfaitement bien, le réparateur a galéré pour trouver un pilote wifi dans cette config. Je souffle pour le moment avant de retenter éventuellement une install ubuntu, dans ce cas je testerais la procédure indiquée par Bougron.
@Brougron, oui c'est pas tres lisible ma démarche... en fait je voulais au départ me débarasser de w10 (ou w8) et passer sous ubuntu ce HP comme mes 2 vieux portables. Mais le w7 qui a été réinstallé me convient pour le moment, c'est de plus le dernier windows que je savais a peu près contrôler. Je ne souhaite absolument pas revenir en w8 ou w10.
Hors ligne
#7 Le 23/11/2015, à 01:56
- Bougron
Re : instal ubuntu 14.04.3 sur HP pavilion 23
Bonsoir
Je comprends ta démarche. Tu devrais refaire un boot-info car il est probable sinon certain que windows7 a été installé en LEGACY et ce que j'expliquais était basé sur un windows 10 en EFI donc ce n'est plus pareil.
Je pense que de disposer d'un windows est un plus et qu'il ne faut pas s'en séparer. Si on décide de l'utiliser de moins en moins, on peux diminuer sa taille de plus en plus de façon à ce qu'il devienne plus petit que ubuntu qui devient de plus en plus gros (Mais avec windows7 c'est plus difficile). Tu as donc intérêt à diminuer immédiatement sa taille au maxima et a créer une nouvelle partition pour commencer à mettre les données que tu partageras plus tard avec ubuntu.
Tu peux déjà mettre en pratique les paragraphes A B C D de ce document https://forum.ubuntu-fr.org/viewtopic.php?pid=20644401 (surtout pas le E sans prendre un maxima de précautions)
Dernière modification par Bougron (Le 23/11/2015, à 02:12)
Hors ligne