#1 Le 08/12/2015, à 18:50
- Jitsumi
[Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
---------------------------------------------------------------------------------------------------------------------------------
EDIT2:
Nouvelles infos!
Le nouveau bios que l'on peut trouver ici:
https://www.asus.com/us/ROG-Republic-Of … _Download/
résout le problème. (Faites gaffe à pas faire n'mporte quoi quand vous updatez un bios..)
---------------------------------------------------------------------------------------------------------------------------------
EDIT: pour ceux qui ont le même problème et qui n'ont pas envie de se lire tout le post, j'ai écrit à la fin de ce message ce qui a marchait pour moi. Merci à malbo!
Salut à tous!
Je viens d'acheter un portable asus GL752VW-T4005T, et j'aimerais y installer ubuntu (et plus tard avoir un dualboot avec windows, mais déjà installer ubuntu, ça sera pas mal).
J'ai pas mal cherché pour trouver quelqu'un avec un problème similaire, mais je n'ai pas trouvé..
En gros, mon problème c'est que je ne peux pas lancer l'installation d'ubuntu. Ca freeze juste après la sélection du menu grub (essayer ubuntu, installer ubuntu, etc...). Des fois, ça freeze direct (écran noir), des fois, ça freeze pendant le chargement d'ubuntu, des fois ça freeze à la sélection des langues au début de l'installation.
J'ai, je pense, tout essayer ("essayer ubuntu", "installer ubuntu", live CD, live USB, en UEFI ou en legacy, avec ou sans fast boot, j'ai désactivé le fast boot dans windows 10 qui est encore installé, j'ai essayer une image minimal d'ubuntu en mode console mais ça freeze aussi au choix des langues ou avant, et j'ai essayer l'option nomodeset pour booter le kernel dans grub)
Rien ne marche, ça m'éneve car si je ne peux pas utiliser ubuntu sur cet ordi, je vais devoir le rendre...
Des supposition?
Mercie d'avance pour votre aide!
Jitsumi
EDIT:
Marche a suivre pour faire fonctionner ubuntu 15.10 avec un Asus GL752VW
(Fonctionne avec un GL752VW-T4005T)
Ceci fonctionne pour moi. Ne venez pas vous plaindre si votre PC explose après avoir suivi ce guide!!!
Préliminaire
Désactivez le fast boot dans votre bios (et dans windows si vous conservez windows, faites une recherche google pour savoir comment faire)
Boot
Bootez sur votre liveCD ou liveUSB (pour moi je suis resté en UEFI, et ça a fonctionné)
Positionnez vous sur le choix "try ubuntu" et appuyé sur la touche "e" pour éditer les options de boot
Positionnez vous entre "splash" et "---" et ajoutez l'option "idle=nomwait", sans les guillemets (vous devriez vous retrouver avec quelque chose comme "splash idle=nomwait ---)
Appuyez sur "F10" pour booter
Installation
Une fois que vous êtes dans ubuntu, lancez l'installation comme vous le feriez d'habitude (personnellement, j'ai installé ubuntu dans le HDD et j'ai laissé windows tout seul dans le SDD, si vous gardez windows et le UEFI, il faut réutiliser la partition UEFI de windows, normalement l'installateur le fait automatiquement si vous choisissez le SSD (sda) pour installer le système de boot)
Une fois installé, redémarrez
Correction du boot
Quand vous redémarrez, une fois dans grub, positionnez vous sur le choix "Ubuntu" et appuyez sur "e" (il faut de nouveau ajouter l'option "idle=nomwait")
Cherchez "quiet splash" (sans guillemet), positionnez vous juste après et ajouter l'option "idle=nomwait" sans les guillemets
Appuyez sur "F10" pour booter
Une fois loggué dans ubuntu, ouvrez un terminal (ctrl+T) et tappez "sudo gedit /etc/default/grub"
Trouvez la ligne qui commence par "GRUB_CMDLINE_LINUX_DEFAULT" et après "quiet splash" ajoutez "idle=nomwait". Après modification, la ligne devrait ressembler à quelque chose comme ça:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash idle=nomwait"
Enregstrez le fichier et quitter
Ensuite toujours dans le terminal, lancez la commande "sudo update-grub" pour mettre à jour grub avec cette option
Complément d'information
Ubuntu 14.04.3 s'installe sans problème. Si vous voulez attendre un fix de la part d'ubuntu, c'est peut-être une bonne solution. Par contre il faut désactivé le secure boot pour l'installer, et le touch pad ne fonctionne pas.
J'ai essayé d'upgrader ubuntu 14.04.3 vers 15.10, mais ça m'a tout "détruit", je ne pense pas possible de corriger en ajoutant l'option dans le boot. Il vaut mieux réinstaller ubuntu 15.10 "par dessus" ubuntu 14.04.3 je pense.
Il y a une autre option qui permet de booter (l'option "nolapic") mais un seul coeur (du processeur) fonctionne avec cette option, donc à éviter.
Je ne suis pas sûr des conséquences de "idle=nomwait", tout à l'air de fonctionner. C'est une option qui touche à l'attente passive. Si un expert pouvez me donnez plus d'indications, ça serait cool.
Dernière modification par Jitsumi (Le 25/01/2016, à 11:41)
Hors ligne
#2 Le 08/12/2015, à 19:32
- manon123
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Salut,
J'ai un asus aussi et j'ai eu le même problème.
On l'a résolu après une longue conversation : La voici.
Distro: Manjaro 20.1-2
Hors ligne
#3 Le 08/12/2015, à 19:47
- Jitsumi
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Salut,
J'ai un asus aussi et j'ai eu le même problème.
On l'a résolu après une longue conversation : La voici.
Ok merci beaucoup!
J'ai lu le post, mais je n'ai pas trop compris ce que tu as fait pour faire fonctionner l'installation.
Si tu peux me dire ce que t'as fait exactement? C'est en désactivant les techno intel rapid???
Hors ligne
#4 Le 08/12/2015, à 20:12
- manon123
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Dans ton bios, il faut que tu mettes le Fast boot sur disabled ainsi que toujours dans le bios, avancé essaye de trouver Anti Surge support et le mettre sur disabled aussi.
C'était la dernière, l'anti Surge support qui m'enpêchait de terminer l'installation. Le bios supposait que le système n'avait plus assez de puissance en alimentation et interrompait l'installation.
Mais veiile bien à ce que ces deux instances soient mises sur disabled.
Dernière modification par manon123 (Le 08/12/2015, à 20:19)
Distro: Manjaro 20.1-2
Hors ligne
#5 Le 08/12/2015, à 21:49
- Jitsumi
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Ok, je viens de regarder, et je n'ai pas d'option "anti surge support".
Par contre, j'avais bien désactivé le Fast boot
Hors ligne
#6 Le 08/12/2015, à 22:05
- manon123
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Je peux avoir le modèle de ta carte mère ?
Donne le retour de :
$ sudo -s
votre_password
# dmidecode -t 2
Si tu le trouves pas, il y a plusieurs méthodes ici : ASUS
Dernière modification par manon123 (Le 08/12/2015, à 22:30)
Distro: Manjaro 20.1-2
Hors ligne
#7 Le 08/12/2015, à 22:41
- Jitsumi
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
J'ai pas pu utiliser les commandes vu que je ne peux pas booter sur linux, par contre dans Windows j'ai trouvé ça:
ASUSTeK COMPUTER INC. GL752VW 1.0
Numéro de série (carte mère): BSN12345678901234567
SKU Number: ASUS-NotebookSKU
Version du bios: GL752VW.205
Date: 15/09/2015
Hors ligne
#8 Le 08/12/2015, à 22:50
- manon123
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Non malheureusement, il ne donne que le nom du bios (GL752VW) et T4005T n'est pas une référence existante pour carte mère asus.
Sous windows, télécharge ce logiciel gratuit, il devrait te donner les renseignements requis : PC-WIZARD
Distro: Manjaro 20.1-2
Hors ligne
#9 Le 08/12/2015, à 22:58
- manon123
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
J'ai pas pu utiliser les commandes vu que je ne peux pas booter sur linux, par contre dans Windows j'ai trouvé ça:
ASUSTeK COMPUTER INC. GL752VW 1.0 Numéro de série (carte mère): BSN12345678901234567 SKU Number: ASUS-NotebookSKU Version du bios: GL752VW.205 Date: 15/09/2015
Et tu as essayé la commande en live ?
Distro: Manjaro 20.1-2
Hors ligne
#10 Le 09/12/2015, à 11:27
- malbo
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Bonjour,
Avec ton modèle d'ordi ultra-moderne ( asus GL752VW-T4005T ) , il est impératif d'utiliser un LiveDVD ou une LiveUSB(*) de Ubuntu 15.10 64 bits. Mais même avec ça, je crois qu'il est nécessaire de prendre en compte ce qui est expliqué dans ce doc. Pas la peine de le lire en détail (le truc à retenir, c'est qu'il faut ajouter l'option i915.preliminary_hw_support=1 au noyau), je vais t'indiquer directement la procédure : tu suis ce qui est expliqué là sauf qu'au lieu d'ajouter nomodeset, tu vas ajouter i915.preliminary_hw_support=1
(*) ma recette pour en faire une depuis Windows : http://forum.ubuntu-fr.org/viewtopic.ph … #p20735601
EDIT : je viens de parcourir cette discussion au sujet du ASUS ROG GL752VW : https://rog.asus.com/forum/showthread.p … OG-GL752VW
J'y ai vu que seul le mode RAID (post #30 du fil) est possible et qu'il n'y a pas possibilité de le changer. On dirait que ça commence à sentir le pâté cette histoire : déjà tu n'arrives même pas à démarrer en session Live et si même tu y parviens, qu'est-ce que ça va donner pour installer Ubuntu là-dedans ?
Dernière modification par malbo (Le 09/12/2015, à 14:08)
Hors ligne
#11 Le 09/12/2015, à 14:57
- Bougron
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Bonjour
As-tu pensé a déactiver sous windows toutes les cochonneries que INTEL installe pour permettre à la messagerie de windows d'être à jour dès que le micro boote... toute la panoplie IRST....
ce qui est la cause de l'installation en RAID. http://forum.hardware.fr/hfr/Ordinateur … 0020_1.htm
===> dans ce document, la partie messagerie n'est pas évoquée, donc c'est ici . http://www.intel.com/support/fr/service … 33108.htmt
http://www.intel.com/support/fr/service … 033108.htm
Dernière modification par Bougron (Le 09/12/2015, à 15:08)
Hors ligne
#12 Le 18/12/2015, à 22:33
- kaerick
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Bonjour tout le monde,
Je vais faire mon faignant mais je n'ai malheureusement pas de temps en ce moment. Je viens de recevoir mon ordinateur Asus ROG GL752VW-T4161T. Normalement, je suis sous Ubuntu sur mes ordinateurs perso. J'utilise des logiciels qui se retrouvent sur les principaux systèmes d'exploitation. Ma question est donc : est-il aisément faisable, sans bidouiller de partout, d'installer Ubuntu sur cet ordinateur, ou faut-il attendre encore un peu ?
En vous remerciant,
Pingouin dans le champ, hiver méchant !
Hors ligne
#13 Le 22/12/2015, à 13:35
- Jitsumi
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Ok, merci beaucoup pour vos réponse.
Et tu as essayé la commande en live ?
Non, car je ne peux pas booter.
Bonjour,
Avec ton modèle d'ordi ultra-moderne ( asus GL752VW-T4005T ) , il est impératif d'utiliser un LiveDVD ou une LiveUSB(*) de Ubuntu 15.10 64 bits. Mais même avec ça, je crois qu'il est nécessaire de prendre en compte ce qui est expliqué dans ce doc. Pas la peine de le lire en détail (le truc à retenir, c'est qu'il faut ajouter l'option i915.preliminary_hw_support=1 au noyau), je vais t'indiquer directement la procédure : tu suis ce qui est expliqué là sauf qu'au lieu d'ajouter nomodeset, tu vas ajouter i915.preliminary_hw_support=1(*) ma recette pour en faire une depuis Windows : http://forum.ubuntu-fr.org/viewtopic.ph … #p20735601
EDIT : je viens de parcourir cette discussion au sujet du ASUS ROG GL752VW : https://rog.asus.com/forum/showthread.p … OG-GL752VW
J'y ai vu que seul le mode RAID (post #30 du fil) est possible et qu'il n'y a pas possibilité de le changer. On dirait que ça commence à sentir le pâté cette histoire : déjà tu n'arrives même pas à démarrer en session Live et si même tu y parviens, qu'est-ce que ça va donner pour installer Ubuntu là-dedans ?
J'ai essayé avec l'option "i915.preliminary_hw_support=1" et ça ne change rien.
Bonjour
As-tu pensé a déactiver sous windows toutes les cochonneries que INTEL installe pour permettre à la messagerie de windows d'être à jour dès que le micro boote... toute la panoplie IRST....
ce qui est la cause de l'installation en RAID. http://forum.hardware.fr/hfr/Ordinateur … 0020_1.htm
===> dans ce document, la partie messagerie n'est pas évoquée, donc c'est ici . http://www.intel.com/support/fr/service … 33108.htmt
http://www.intel.com/support/fr/service … 033108.htm
Je ne suis pas sûr d'avoir ça d'installé, mais je vais voir.
Hors ligne
#14 Le 22/12/2015, à 14:49
- Jitsumi
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Bon, j'arrive a booter sur Linux Mint 17.3 cinnamon.
Ca ne me dérange pas d'utiliser mint, mais je préfèrerai rester sur ubuntu, du coup, quelqu'un sait c'est quoi la différence entre ubuntu et mint qui fait que ça fonctionne ou pas sur ma machine? ^^'
Hors ligne
#15 Le 22/12/2015, à 19:58
- malbo
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Linux Mint 17.3 est basé sur Ubuntu 14.04.3 comme on peut voir ici : https://fr.wikipedia.org/wiki/Linux_Min … s_versions
La raison pour laquelle cet ersatz de Ubuntu 14.04.3 fonctionne mieux dans ta machine que Ubuntu 15.10 (que je t'ai conseillé plus haut), je ne la connais pas. C'est un peu surprenant mais c'est possible.
Hors ligne
#16 Le 22/12/2015, à 22:59
- Bougron
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Bonsoir
L'explication est peut-être à trouver dans ces phrases
La philosophie du projet Mint est compatible avec l'utilisation de logiciels propriétaires (Ubuntu aussi, mais en utilise moins, tout en permettant facilement leur installation ultérieure). Sous Mint, la commodité d'usage pratique est préférée aux questions plus abstraites de libertés, droits, licences, ou éthique du libre. La plupart des versions de Mint sont donc livrées avec des codecs propriétaires, comme le plugin Adobe Flash Player
Dernière modification par Bougron (Le 22/12/2015, à 23:00)
Hors ligne
#17 Le 23/12/2015, à 03:38
- Jitsumi
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Bonsoir
Oui j'ai vu aussi que mint 17.3 était basé sur ubuntu 14.04, du coup j'ai essayé avec ubuntu 14.04.3. Et là, ça boote "mieux", cad, ça boote pour toujours (logo d'ubuntu avec les 5 petits ronds).
J'ai désactivé le secure boot, et là, ça marche, j'ai même réussi a l'installer en dual boot!
Là j'essaye de faire une mise à jour vers ubuntu 15.10 pour voir ce que ça donne.
Bonsoir
L'explication est peut-être à trouver dans ces phraseshttps://fr.wikipedia.org/wiki/Linux_Mint a écrit :La philosophie du projet Mint est compatible avec l'utilisation de logiciels propriétaires (Ubuntu aussi, mais en utilise moins, tout en permettant facilement leur installation ultérieure). Sous Mint, la commodité d'usage pratique est préférée aux questions plus abstraites de libertés, droits, licences, ou éthique du libre. La plupart des versions de Mint sont donc livrées avec des codecs propriétaires, comme le plugin Adobe Flash Player
Je ne pense pas qu'ils utilisent beaucoup de logiciel proprio dans le processus de boot, et maintenant je sais que ça fonctionne avec ubuntu 14.04.3. A la limite, ça pourrait expliquer pourquoi j'ai du désactiver le secure boot pour ubuntu et pas pour mint (ils ont peut-être récupéré une clé uefi pour le secure boot qui n'est pas libre ou un truc comme ça)
Hors ligne
#18 Le 24/12/2015, à 09:14
- malbo
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Pourrais-tu faire un Boot-Info depuis une session de ton Ubuntu installé et donner l'URL de ce Boot-Info dans ta réponse ? j'aimerais bien voir comment tout ça est "vu" par le Boot-Info (en particulier, comment est détecté le SSD)
Hors ligne
#19 Le 25/12/2015, à 21:56
- Jitsumi
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Voilà le résultat de boot-info
(Joyeux Noël!)
Hors ligne
#20 Le 25/12/2015, à 21:57
- Jitsumi
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Ha et j'ai essayé de mettre à niveau (de 14.04 à 15.10), et ça m'a exploser mes dépots apt
Hors ligne
#21 Le 26/12/2015, à 09:44
- malbo
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Ton Boot-Info dont tu as donné le lien dans le post #19 est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/Boot/bootx64.efi /EFI/ubuntu/MokManager.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootmgr.efi
/EFI/Microsoft/Boot/memtest.efi
sda2: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb2: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sdb4: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 128.0 GB, 128035676160 bytes
256 heads, 63 sectors/track, 15505 cylinders, total 250069680 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 4,294,967,295 4,294,967,295 ee GPT
/dev/sda1 ends after the last sector of /dev/sda
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 534,527 532,480 EFI System partition
/dev/sda2 534,528 567,295 32,768 Microsoft Reserved Partition (Windows)
/dev/sda3 567,296 249,047,039 248,479,744 Data partition (Windows/Linux)
/dev/sda4 249,047,040 250,068,991 1,021,952 Windows Recovery Environment (Windows)
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sdb1 2,048 629,147,647 629,145,600 Data partition (Windows/Linux)
/dev/sdb2 629,147,648 645,924,863 16,777,216 Swap partition (Linux)
/dev/sdb3 645,924,864 750,782,463 104,857,600 Data partition (Linux)
/dev/sdb4 750,782,464 1,953,523,711 1,202,741,248 Data partition (Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 8277-6DBA vfat SYSTEM
/dev/sda3 DE067B41067B19AB ntfs OS
/dev/sda4 A000BD8A00BD67C4 ntfs RECOVERY
/dev/sdb1 58E28F0FE28EF094 ntfs DATA
/dev/sdb2 02daa242-0a9c-4ee6-8c30-0ec19e7f9053 swap
/dev/sdb3 a4e4fc44-dca0-4592-9845-2afb62d96ca9 ext4
/dev/sdb4 8f734087-2ee2-4945-919f-2262077ff9fa ext4
/dev/sr0 iso9660 Ubuntu 15.10 amd64
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Dec 25 20:35 ata-HGST_HTS721010A9E630_JR100X6P3EJHWE -> ../../sdb
lrwxrwxrwx 1 root root 10 Dec 25 20:35 ata-HGST_HTS721010A9E630_JR100X6P3EJHWE-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Dec 25 12:46 ata-HGST_HTS721010A9E630_JR100X6P3EJHWE-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Dec 25 12:46 ata-HGST_HTS721010A9E630_JR100X6P3EJHWE-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 10 Dec 25 12:46 ata-HGST_HTS721010A9E630_JR100X6P3EJHWE-part4 -> ../../sdb4
lrwxrwxrwx 1 root root 9 Dec 25 12:46 ata-MATSHITA_DVD-RAM_UJ8HC_5HUPA099836 -> ../../sr0
lrwxrwxrwx 1 root root 9 Dec 25 20:35 ata-SAMSUNG_MZNLF128HCHP-00004_S2DNNXAG606983 -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 25 12:46 ata-SAMSUNG_MZNLF128HCHP-00004_S2DNNXAG606983-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 25 12:46 ata-SAMSUNG_MZNLF128HCHP-00004_S2DNNXAG606983-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 25 20:35 ata-SAMSUNG_MZNLF128HCHP-00004_S2DNNXAG606983-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Dec 25 20:35 ata-SAMSUNG_MZNLF128HCHP-00004_S2DNNXAG606983-part4 -> ../../sda4
lrwxrwxrwx 1 root root 9 Dec 25 20:35 wwn-0x5000cca7dcf06d52 -> ../../sdb
lrwxrwxrwx 1 root root 10 Dec 25 20:35 wwn-0x5000cca7dcf06d52-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Dec 25 12:46 wwn-0x5000cca7dcf06d52-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Dec 25 12:46 wwn-0x5000cca7dcf06d52-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 10 Dec 25 12:46 wwn-0x5000cca7dcf06d52-part4 -> ../../sdb4
lrwxrwxrwx 1 root root 9 Dec 25 20:35 wwn-0x5002538740026681 -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 25 12:46 wwn-0x5002538740026681-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 25 12:46 wwn-0x5002538740026681-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 25 20:35 wwn-0x5002538740026681-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Dec 25 20:35 wwn-0x5002538740026681-part4 -> ../../sda4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /boot/efi vfat (rw)
/dev/sdb3 / ext4 (rw,errors=remount-ro)
/dev/sdb4 /home ext4 (rw)
/dev/sr0 /media/jeremie/Ubuntu 15.10 amd64 iso9660 (ro,nosuid,nodev,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500,uhelper=udisks2)
=========================== sdb3/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd1,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3 a4e4fc44-dca0-4592-9845-2afb62d96ca9
else
search --no-floppy --fs-uuid --set=root a4e4fc44-dca0-4592-9845-2afb62d96ca9
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-a4e4fc44-dca0-4592-9845-2afb62d96ca9' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3 a4e4fc44-dca0-4592-9845-2afb62d96ca9
else
search --no-floppy --fs-uuid --set=root a4e4fc44-dca0-4592-9845-2afb62d96ca9
fi
linux /boot/vmlinuz-3.19.0-42-generic.efi.signed root=UUID=a4e4fc44-dca0-4592-9845-2afb62d96ca9 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.19.0-42-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-a4e4fc44-dca0-4592-9845-2afb62d96ca9' {
menuentry 'Ubuntu, avec Linux 3.19.0-42-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-42-generic-advanced-a4e4fc44-dca0-4592-9845-2afb62d96ca9' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3 a4e4fc44-dca0-4592-9845-2afb62d96ca9
else
search --no-floppy --fs-uuid --set=root a4e4fc44-dca0-4592-9845-2afb62d96ca9
fi
echo 'Chargement de Linux 3.19.0-42-generic…'
linux /boot/vmlinuz-3.19.0-42-generic.efi.signed root=UUID=a4e4fc44-dca0-4592-9845-2afb62d96ca9 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.19.0-42-generic
}
menuentry 'Ubuntu, with Linux 3.19.0-42-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-42-generic-recovery-a4e4fc44-dca0-4592-9845-2afb62d96ca9' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3 a4e4fc44-dca0-4592-9845-2afb62d96ca9
else
search --no-floppy --fs-uuid --set=root a4e4fc44-dca0-4592-9845-2afb62d96ca9
fi
echo 'Chargement de Linux 3.19.0-42-generic…'
linux /boot/vmlinuz-3.19.0-42-generic.efi.signed root=UUID=a4e4fc44-dca0-4592-9845-2afb62d96ca9 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.19.0-42-generic
}
menuentry 'Ubuntu, avec Linux 3.19.0-25-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-25-generic-advanced-a4e4fc44-dca0-4592-9845-2afb62d96ca9' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3 a4e4fc44-dca0-4592-9845-2afb62d96ca9
else
search --no-floppy --fs-uuid --set=root a4e4fc44-dca0-4592-9845-2afb62d96ca9
fi
echo 'Chargement de Linux 3.19.0-25-generic…'
linux /boot/vmlinuz-3.19.0-25-generic root=UUID=a4e4fc44-dca0-4592-9845-2afb62d96ca9 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.19.0-25-generic
}
menuentry 'Ubuntu, with Linux 3.19.0-25-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-25-generic-recovery-a4e4fc44-dca0-4592-9845-2afb62d96ca9' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3 a4e4fc44-dca0-4592-9845-2afb62d96ca9
else
search --no-floppy --fs-uuid --set=root a4e4fc44-dca0-4592-9845-2afb62d96ca9
fi
echo 'Chargement de Linux 3.19.0-25-generic…'
linux /boot/vmlinuz-3.19.0-25-generic root=UUID=a4e4fc44-dca0-4592-9845-2afb62d96ca9 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.19.0-25-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-efi-8277-6DBA' {
insmod part_gpt
insmod fat
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 8277-6DBA
else
search --no-floppy --fs-uuid --set=root 8277-6DBA
fi
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb3/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb3 during installation
UUID=a4e4fc44-dca0-4592-9845-2afb62d96ca9 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=8277-6DBA /boot/efi vfat defaults 0 1
# /home was on /dev/sdb4 during installation
UUID=8f734087-2ee2-4945-919f-2262077ff9fa /home ext4 defaults 0 2
# swap was on /dev/sdb2 during installation
UUID=02daa242-0a9c-4ee6-8c30-0ec19e7f9053 none swap sw 0 0
--------------------------------------------------------------------------------
ADDITIONAL INFORMATION :
=================== log of boot-info 2015-12-25__20h35 ===================
boot-info version : 4ppa35
boot-sav version : 4ppa35
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa35
boot-info is executed in installed-session (Ubuntu 14.04.3 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.19.0-42-generic.efi.signed root=UUID=a4e4fc44-dca0-4592-9845-2afb62d96ca9 ro quiet splash vt.handoff=7
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/disk/by-uuid/a4e4fc44-dca0-4592-9845-2afb62d96ca9:L'OS actuellement utilisé - Ubuntu 14.04.3 LTS CurrentSession:linux
/dev/sda1@/EFI/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
=================== blkid:
/dev/sr0: LABEL="Ubuntu 15.10 amd64" TYPE="iso9660"
/dev/sda1: LABEL="SYSTEM" UUID="8277-6DBA" TYPE="vfat"
/dev/sda3: LABEL="OS" UUID="DE067B41067B19AB" TYPE="ntfs"
/dev/sda4: LABEL="RECOVERY" UUID="A000BD8A00BD67C4" TYPE="ntfs"
/dev/sdb1: LABEL="DATA" UUID="58E28F0FE28EF094" TYPE="ntfs"
/dev/sdb2: UUID="02daa242-0a9c-4ee6-8c30-0ec19e7f9053" TYPE="swap"
/dev/sdb3: UUID="a4e4fc44-dca0-4592-9845-2afb62d96ca9" TYPE="ext4"
/dev/sdb4: UUID="8f734087-2ee2-4945-919f-2262077ff9fa" TYPE="ext4"
disk/by-uuid/a4e4fc44-dca0-4592-9845-2afb62d96ca9 (sda) has unknown type. Veuillez indiquer ce message à boot.repair@gmail.com
1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Windows not detected by os-prober on sda3.
Linux not detected by os-prober on sdb3. Veuillez indiquer ce message à boot.repair@gmail.com
Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda ». L'utilitaire sfdisk ne prend pas GPT en charge. Utilisez GNU Parted.
Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sdb ». L'utilitaire sfdisk ne prend pas GPT en charge. Utilisez GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bootx64.efi
=================== //etc/grub.d/ :
drwxr-xr-x 2 root root 4096 déc. 23 20:02 grub.d
total 76
-rwxr-xr-x 1 root root 9424 juin 26 13:16 00_header
-rwxr-xr-x 1 root root 6058 mai 13 2015 05_debian_theme
-rwxr-xr-x 1 root root 11608 juin 26 13:16 10_linux
-rwxr-xr-x 1 root root 10412 juin 26 13:16 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 juin 26 13:16 30_os-prober
-rwxr-xr-x 1 root root 1416 juin 26 13:16 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juin 26 13:16 40_custom
-rwxr-xr-x 1 root root 216 juin 26 13:16 41_custom
-rw-r--r-- 1 root root 483 juin 26 13:16 README
=================== //etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sdb3: UUID=8277-6DBA (sda1)
=================== efibootmgr -v
BootCurrent: 0002
Timeout: 2 seconds
BootOrder: 0002,0001,0004,0008,0009,0003,0000
Boot0000* Windows Boot Manager Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* Windows Boot Manager HD(1,800,82000,3d8fe414-ccc5-4262-b91e-b582c9325747)File(EFIMICROSOFTBOOTBOOTMGFW.EFI)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0002* ubuntu HD(1,800,82000,3d8fe414-ccc5-4262-b91e-b582c9325747)File(EFIUBUNTUSHIMX64.EFI)
Boot0003* usb Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)
Boot0004* UEFI: MATSHITA DVD-RAM UJ8HC ACPI(a0341d0,0)PCI(17,0)03120a000100ffff0000CD-ROM(1,8b21b,11c0)..BO
Boot0008* ubuntu HD(1,800,82000,3d8fe414-ccc5-4262-b91e-b582c9325747)File(EFIUBUNTUGRUBX64.EFI)..BO
Boot0009* UEFI: JetFlashTranscend 8GB 1100, Partition 1 ACPI(a0341d0,0)PCI(14,0)USB(4,0)HD(1,20,f17fe0,c3072e18)..BO
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /boot/efi.
sda3 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda3.
sda4 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda4.
sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sdb1.
sdb3 : sdb, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /.
sdb4 : sdb, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /home.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
sdb : GPT, no-BIOS_boot, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA SAMSUNG MZNLF128 (scsi)
Disk /dev/sda: 128GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 274MB 273MB fat32 EFI system partition boot
2 274MB 290MB 16.8MB Microsoft reserved partition msftres
3 290MB 128GB 127GB ntfs Basic data partition msftdata
4 128GB 128GB 523MB ntfs Basic data partition hidden, diag
Model: ATA HGST HTS721010A9 (scsi)
Disk /dev/sdb: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 322GB 322GB ntfs Basic data partition msftdata
2 322GB 331GB 8590MB linux-swap(v1)
3 331GB 384GB 53.7GB ext4
4 384GB 1000GB 616GB ext4
Model: MATSHITA DVD-RAM UJ8HC (scsi)
Disk /dev/sr0: 4700MB
Sector size (logical/physical): 2048B/2048B
Partition Table: mac
Number Start End Size File system Name Flags
1 8192B 24.6kB 16.4kB Apple
2 4668MB 4678MB 9306kB EFI
=================== parted -lm:
BYT;
/dev/sda:128GB:scsi:512:512:gpt:ATA SAMSUNG MZNLF128;
1:1049kB:274MB:273MB:fat32:EFI system partition:boot;
2:274MB:290MB:16.8MB::Microsoft reserved partition:msftres;
3:290MB:128GB:127GB:ntfs:Basic data partition:msftdata;
4:128GB:128GB:523MB:ntfs:Basic data partition:hidden, diag;
BYT;
/dev/sdb:1000GB:scsi:512:4096:gpt:ATA HGST HTS721010A9;
1:1049kB:322GB:322GB:ntfs:Basic data partition:msftdata;
2:322GB:331GB:8590MB:linux-swap(v1)::;
3:331GB:384GB:53.7GB:ext4::;
4:384GB:1000GB:616GB:ext4::;
BYT;
/dev/sr0:4700MB:scsi:2048:2048:mac:MATSHITA DVD-RAM UJ8HC;
1:8192B:24.6kB:16.4kB::Apple:;
2:4668MB:4678MB:9306kB::EFI:;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 119,2G
sda1 part vfat 260M SYSTEM
sda2 part 16M
sda3 part ntfs 118,5G OS
sda4 part ntfs 499M RECOVERY
sdb disk 931,5G
sdb1 part ntfs 300G DATA
sdb2 part swap 8G
sdb3 part ext4 50G
sdb4 part ext4 573,5G
sr0 rom iso9660 4,4G Ubuntu 15.10 amd64
KNAME ROTA RO RM STATE MOUNTPOINT
sda 0 0 0 running
sda1 0 0 0 /boot/efi
sda2 0 0 0
sda3 0 0 0 /mnt/boot-sav/sda3
sda4 0 0 0 /mnt/boot-sav/sda4
sdb 1 0 0 running
sdb1 1 0 0 /mnt/boot-sav/sdb1
sdb2 1 0 0 [SWAP]
sdb3 1 0 0 /
sdb4 1 0 0 /home
sr0 1 0 1 running /media/jeremie/Ubuntu 15.10 amd64
=================== mount:
/dev/sdb3 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda1 on /boot/efi type vfat (rw)
/dev/sdb4 on /home type ext4 (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=jeremie)
/dev/sr0 on /media/jeremie/Ubuntu 15.10 amd64 type iso9660 (ro,nosuid,nodev,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500,uhelper=udisks2)
/dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdb1 on /mnt/boot-sav/sdb1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 sdb3 sdb4 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hpet i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 input kmsg kvm log mapper mcelog media0 mem memory_bandwidth net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sdb sdb1 sdb2 sdb3 sdb4 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 08 fe 1b |.X.MSDOS5.0.....|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 20 08 00 01 02 00 00 00 00 00 00 02 00 00 00 |. ..............|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 ba 6d 77 82 4e 4f 20 4e 41 4d 45 20 20 |..).mw.NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 56 40 88 4e 02 8a 56 |{......|.V@.N..V|
00000070 40 b4 41 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a |@.A..U..r...U.u.|
00000080 f6 c1 01 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd |...t..F..-.V@...|
00000090 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 |.s......f...@f..|
000000a0 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 |...?.......Af...|
000000b0 66 f7 e1 66 89 46 f8 83 7e 16 00 75 39 83 7e 2a |f..f.F..~..u9.~*|
000000c0 00 77 33 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 |.w3f.F.f........|
000000d0 00 e8 2c 00 e9 a8 03 a1 f8 7d 80 c4 7c 8b f0 ac |..,......}..|...|
000000e0 84 c0 74 17 3c ff 74 09 b4 0e bb 07 00 cd 10 eb |..t.<.t.........|
000000f0 ee a1 fa 7d eb e4 a1 7d 80 eb df 98 cd 16 cd 19 |...}...}........|
00000100 66 60 80 7e 02 00 0f 84 20 00 66 6a 00 66 50 06 |f`.~.... .fj.fP.|
00000110 53 66 68 10 00 01 00 b4 42 8a 56 40 8b f4 cd 13 |Sfh.....B.V@....|
00000120 66 58 66 58 66 58 66 58 eb 33 66 3b 46 f8 72 03 |fXfXfXfX.3f;F.r.|
00000130 f9 eb 2a 66 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 |..*f3.f..N.f....|
00000140 8a ca 66 8b d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 |..f..f....v....V|
00000150 40 8a e8 c0 e4 06 0a cc b8 01 02 cd 13 66 61 0f |@............fa.|
00000160 82 74 ff 81 c3 00 02 66 40 49 75 94 c3 42 4f 4f |.t.....f@Iu..BOO|
00000170 54 4d 47 52 20 20 20 20 00 00 00 00 00 00 00 00 |TMGR ........|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 44 69 |..............Di|
000001b0 73 6b 20 65 72 72 6f 72 ff 0d 0a 50 72 65 73 73 |sk error...Press|
000001c0 20 61 6e 79 20 6b 65 79 20 74 6f 20 72 65 73 74 | any key to rest|
000001d0 61 72 74 0d 0a 00 00 00 00 00 00 00 00 00 00 00 |art.............|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 ac 01 b9 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda3
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 a8 08 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 7f cf 0e 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 ab 19 7b 06 41 7b 06 de |..........{.A{..|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda4
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 28 d8 0e |........?....(..|
00000020 00 00 00 00 80 00 80 00 ff 97 0f 00 00 00 00 00 |................|
00000030 55 a6 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |U...............|
00000040 f6 00 00 00 01 00 00 00 c4 67 bd 00 8a bd 00 a0 |.........g......|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdb1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 f8 ff 7f 25 00 00 00 00 |...........%....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 94 f0 8e e2 0f 8f e2 58 |...............X|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.9G 12K 3.9G 1% /dev
tmpfs tmpfs 789M 1.5M 787M 1% /run
/dev/sdb3 ext4 50G 4.7G 42G 11% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 3.9G 632K 3.9G 1% /run/shm
none tmpfs 100M 44K 100M 1% /run/user
/dev/sda1 vfat 256M 31M 226M 13% /boot/efi
/dev/sdb4 ext4 565G 7.3G 529G 2% /home
/dev/sr0 iso9660 1.1G 1.1G 0 100% /media/jeremie/Ubuntu 15.10 amd64
/dev/sda3 fuseblk 119G 75G 45G 63% /mnt/boot-sav/sda3
/dev/sda4 fuseblk 499M 327M 172M 66% /mnt/boot-sav/sda4
/dev/sdb1 fuseblk 300G 44G 257G 15% /mnt/boot-sav/sdb1
=================== fdisk -l:
Disk /dev/sda: 128.0 GB, 128035676160 bytes
256 heads, 63 sectors/track, 15505 cylinders, total 250069680 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x2d5bcd49
Device Boot Start End Blocks Id System
/dev/sda1 1 4294967295 2147483647+ ee GPT
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x3cdf9188
Device Boot Start End Blocks Id System
/dev/sdb1 1 1953525167 976762583+ ee GPT
Partition 1 does not start on physical sector boundary.
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sdb3, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
=================== Blockers in case of suggested repair
Veuillez utiliser ce logiciel dans une session-live (live-CD ou live-USB). Cela vous permettra d'utiliser cette fonctionnalité.
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sdb (1000GB) !
Les fichiers de démarrage de [Linux] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
Si votre ordinateur redémarre directement sur Windows, essayez de changer l'ordre de démarrage dans votre BIOS.
Si votre BIOS ne permet pas de changer l'ordre de démarrage, changez l'entrée de démarrage par défaut de l'amorceur Windows.
Par exemple, vous pouvez démarrer Windows, puis saisir la commande suivante dans une invite de commande en mode administrateur :
bcdedit /set {bootmgr} path \EFI\...\grub*.efi
=================== User settings
The settings chosen by the user will not act on the boot.
On y voit bien la référence de ton SSD dans cette partie :
=================== parted -l:
Model: ATA SAMSUNG MZNLF128 (scsi)
Disk /dev/sda: 128GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 274MB 273MB fat32 EFI system partition boot
2 274MB 290MB 16.8MB Microsoft reserved partition msftres
3 290MB 128GB 127GB ntfs Basic data partition msftdata
4 128GB 128GB 523MB ntfs Basic data partition hidden, diag
Il s'agit bien du MZNLF128HCHP dont on peut voir la doc ici : http://www.samsung.com/semiconductor/pr … CHP?ia=831
Le point à noter, c'est : "Interface : SATA". A comparer avec le modèle MZVLV128HCGR qui équipe le modèle Asus ROG G752VT de scarabdore (ici) pour lequel l'interface est "PCI Express Gen3 x4" (doc) et qui n'est même pas détecté par Ubuntu (*). Toi tu as la chance que ton SSD soit convenablement géré par Ubuntu.
Mes commentaires généraux sur ton installation : tu as laissé intact le partitionnement de ce SSD. Windows reste installé tout seul là-dedans. Il y a seulement la présence des fichiers de démarrage de Ubuntu dans la partition EFI du SSD. Ubuntu 14.04.3 64 bits est installé en mode EFI dans le disque dur Hitachi HGST HTS721010A9 de 1 To. Tu as désactivé "Secure Boot" comme on peut voir là :
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
La partie "efibootmgr -v" du Boot-Info indique que le démarrage par défaut se fait sur le menu Grub. En principe, tu dois pouvoir démarrer sur Windows en sélectionnant l'entrée "Windows Boot Manager (sur /dev/sda1)" dans ce menu Grub. Peux-tu confirmer ?
(*) Batlax est en galère aussi avec son Asus ROG G752VY-GC118T équipé du MZVLV128 (voir ici)
Dernière modification par malbo (Le 26/12/2015, à 10:28)
Hors ligne
#22 Le 26/12/2015, à 11:59
- Jitsumi
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Mes commentaires généraux sur ton installation : tu as laissé intact le partitionnement de ce SSD. Windows reste installé tout seul là-dedans. Il y a seulement la présence des fichiers de démarrage de Ubuntu dans la partition EFI du SSD. Ubuntu 14.04.3 64 bits est installé en mode EFI dans le disque dur Hitachi HGST HTS721010A9 de 1 To. Tu as désactivé "Secure Boot" comme on peut voir là :
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)La partie "efibootmgr -v" du Boot-Info indique que le démarrage par défaut se fait sur le menu Grub. En principe, tu dois pouvoir démarrer sur Windows en sélectionnant l'entrée "Windows Boot Manager (sur /dev/sda1)" dans ce menu Grub. Peux-tu confirmer ?
Oui je confirme, j'ai laissé windows dans son coin pour être à peu prêt sur d'avoir quelque chose sûr quoi booter (je n'ai pas eu de CD de windows ni de clé avec mon ordi... j'ai extrait tout ça mais bon... je ne préfère pas prendre de risque). Et j'ai du désactivé le secure boot, sinon ubuntu 14.04.03 ne booté pas (il chargait à l'infini, mais il ne freezait pas).
Hors ligne
#23 Le 26/12/2015, à 12:41
- malbo
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Merci pour ce complément d'info. Par ailleurs, as-tu des choses à signaler (des fonctionnalités merdiques - ou carrément absentes - sous Ubuntu alors que ça marche bien sous Windows) ou des conseils à donner à ceux qui ont le même modèle que toi et qui souhaiteraient installer Ubuntu en dual-boot ?
Dernière modification par malbo (Le 26/12/2015, à 12:42)
Hors ligne
#24 Le 26/12/2015, à 12:45
- Jitsumi
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Le seul truc que j'ai remarqué, c'est que le touchpad ne fonctionne pas.
Sinon, tout à l'air de bien marché (les drivers nvidia s'installent bien, et j'utilise bien la carte nvidia, pas eu de problème à ce niveau là)
Et je n'ai pas essayé d'utiliser le SSD sous ubuntu.
Bien sûr, j'aimerais pouvoir utiliser les version plus récentes d'ubuntu, vu que ubuntu 14.04.03 fonctionne, je pense que c'est plutôt du côté de ubuntu qu'il y a un problème, donc je vais reporter un bug.
Hors ligne
#25 Le 27/12/2015, à 07:13
- malbo
Re : [Résolu]Installer Ubuntu - Asus GL752VW-T4005T - (live CD freeze)
Je viens d'ajouter ton modèle GL752VW-T4005T dans la Liste des portables « Asus » et j'ai donné le lien vers la présente discussion. Comme ça tu pourras poster ici dans le cas où tu aurais un autre conseil à donner ou une observation à faire.
Pour mémoire ton modèle est équipé d'un processeur Intel Core i7-6700HQ et d'un chipset graphique NVIDIA GeForce GTX 960M
EDIT : pour l'heure, il semble que tu ne puisses pas installer la version 15.10 mais sache qu'en février 2016, la version 14.04.4 de Ubuntu va sortir (voir doc) et une mise à niveau vers cette version te sera proposée par le gestionnaire de mises à jour (tu pourras aussi faire cette mise à niveau en "manuel" en suivant les instructions qui seront données dans la doc). Cette version 14.04.4 te donnera le même noyau et la même gestion de l'affichage que la version 15.10.
Il faut savoir que depuis la version 15.04, Ubuntu utilise le système d'initialisation systemd (c'est mentionné ici) alors que toutes les versions de Trusty jusqu'à la future 14.04.5 continueront d'utiliser Upstart, l'ancien système d'initialisation. Pour moi, c'est une différence importante.
Dernière modification par malbo (Le 27/12/2015, à 09:51)
Hors ligne