#1 Le 28/12/2015, à 13:16
- Robin10
[Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
Bonjour à tous,
Je voudrais installer ubuntu sur mon ordinateur qui marche pour l'instant sous windows, j'ai donc suivi ce tutoriel https://openclassrooms.com/courses/repr … -de-linux/.
Cependant, au moment de réfléchir sur les partitions, j'ai vu que j'en avait déjà 3 de base sur mon ordinateur. Sachant que d'après ce tutoriel, il faut deux partitions pour Linux (swap et /) et qu'on ne peut dépasser les 4 partitions, m'est-il impossible d'installer Linux avec cette configuration ?
Si j'opte pour une installation simple, sans faire les partitions moi-même ("Ubuntu va se faire automatiquement de la place sur votre disque dur et créer les partitions pour vous" d'après ce tutoriel), est ce que cela résous le problème ou au contraire y-a-t-il un danger qu'il écrase une partition ou s'installe mal ?
Enfin, a quel point une installation depuis Windows est-elle moins performante ? Cela pourrait être une solution à mon problème de partition, mais étant donné que j'installe Linux surtout pour faire utiliser des logiciels de "calcul" (bionformatique donc comparaisons de séquences, etc), j'ai pensé qu'il serait mieux d'installer Linux depuis le CD comme proposé dans le tutoriel, mais je dois admettre n'y connais pas grand chose.
J'espère que mes questions ne sont pas trop triviales, je débute avec Linux !
Merci d'avance et joyeuses fêtes à tous :)
Robin
Dernière modification par Robin10 (Le 30/12/2015, à 15:20)
Hors ligne
#2 Le 28/12/2015, à 14:19
- Babdu89
Re : [Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
Bonjour.
Stp, veux tu bien répondre à cette demande?
https://doc.ubuntu-fr.org/tutoriel/boot-info
Faire çà avec la méthode standard. 1. Et poster dans ta répons l'URL donnée en fin de manip.
Plutôt que de te demander de donner des réponse à de multiples commandes. Au moins on aura pratiquement toutes les information sur ta config, sauf bien le nom de la marque de ta machine et son modèle complet. Renseignements que tu voudras bien donner dans ta réponse. Merci.
Cependant, au moment de réfléchir sur les partitions, j'ai vu que j'en avait déjà 3 de base sur mon ordinateur.
Si c'est depuis Windows, ce n'est pas impossible qu'il ne montre pas les partitions cachées si il y en a. Le boot info les montrera lui .
Joyeuses fêtes à toi aussi.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#3 Le 28/12/2015, à 15:47
- Robin10
Re : [Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
Bonjour,
Effectivement, pour voir les partitions que j'avais de base j'ai utilisé windows.
Voilà ce que j'obtiens avec le scan sous linux : http://paste.ubuntu.com/14240938/.
Concernant ma machine, il s'agit d'un HP notebook 14-ac107nf.
Merci beaucoup pour ton aide,
Robin
Hors ligne
#4 Le 28/12/2015, à 15:56
- Robin10
Re : [Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
D'ailleurs, je viens de voir que je ne pourrais pas installer Wubi puisque j'ai un ordinateur avec windows 8 préinstallé, du coup ma seule chance pour avoir accès à Linux sera de résoudre mon problème de partitionnement. En tout cas, ma dernière question sur les performances de Wubi n'a pas d'intérêt.
Hors ligne
#5 Le 28/12/2015, à 16:19
- Nasman
Re : [Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
Je pense que ta table des partitions est de type GPT et de ce fait n'a pas la limitation des 4 partitions principales.
PC fixe sous Bionic 64 bits et portable avec Focal 64 bits
Hors ligne
#6 Le 28/12/2015, à 16:21
- Babdu89
Re : [Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
Merci, je lis le boot info.
À première vue, ton Windows est installé en mode UEFI. Donc le disque a une table de partitions de type GPT, il n'y a pas la contrainte d'avoir 4 partitions primaire. Ou 3 partitions primaire maxi + une partition étendue où l'on met des partitions logiques comme avec un partitionnement de type MSDOS.
En GPT, toutes les partitions sont des partitions primaire.
Le souci va quand même être, qu'il faudra faire de la place à Ubuntu par la réduction de partitions Windows.
Je lis complètement le boot info, et je reposte ensuite.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#7 Le 28/12/2015, à 16:30
- Babdu89
Re : [Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
Voici un tuto que je te conseille de lire et relire.
Il devrait t'aider efficacement à préparer et installer ton Ubuntu en mode UEFI en dual boot avec Windows.
http://libreaquimperle.blogspot.fr/p/ef … nfant.html
Si il y a des choses que tu veux approfondir, demande de l'aide ici.
Stp, veux tu bien en modifiant ton premier post, ajouter la mention UEFI dans le titre de ton sujet.
Çà aura pour effet d'attirer l'attention des spécialistes (que je ne suis pas encore) des installations en mode UEFI, pour te venir en aide.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#8 Le 28/12/2015, à 16:38
- Bougron
Re : [Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
...
Çà aura pour effet d'attirer l'attention des spécialistes (que je ne suis pas encore) des installations en mode UEFI, pour te venir en aide.
@+. Babdu89 .
Bonjour Babdu89.
Ton diplôme devrait être disponible dès le 31 de ce mois......
Hors ligne
#9 Le 28/12/2015, à 17:10
- Babdu89
Re : [Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
@ Bougron.
Non non!!!.
Il ne faut pas précipiter les choses.
Si je me débrouille bien à la lecture, des rapports boot info d'installations en UEFI, je n'ai pas la capacité comme toi , malbo et d'autres de me permettre de faire modifier le contenu de certain fichiers efi (dont efibootmgr -v par exemple).
Non, çà permet de "dégrossir" un peut le travail, et de faire patienter l'utilisateur auprès duquel j'interviens. Mais pas de vraiment pouvoir dépanner. J'ai encore beaucoup à apprendre. Qu'on se le dise... Et toujours pas de machine UEFI/BIOS a disposition à la maison pour le faire. Mes vieilles machines résistent...
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#10 Le 28/12/2015, à 17:59
- malbo
Re : [Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
Pour revenir au post #1 et au tutoriel que Robin10 s’apprêtait à mettre en pratique : Reprenez le contrôle à l'aide de Linux !
Quel tuto pourri ! Pas une seule fois il est mentionné UEFI là-dedans. Il a dû être créé il y a 3 ans ce tuto, et pas mis à jour pour seulement évoquer l’existence de UEFI.
Dernière modification par malbo (Le 28/12/2015, à 18:00)
Hors ligne
#11 Le 28/12/2015, à 18:19
- Robin10
Re : [Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
Merci beaucoup à tous pour vos réponses ! j'ai changé le titre, comme suggéré.
J'ai commencé à regarder ce tuto, je vais essayer de m'en sortir avec lui. Si vous pensez que le fait que j'ai déjà 3 partitions de base ne pose pas de problèmes, ca devrait le faire. Si j'ai des questions je vous demanderais, mais j'espère que je n'en n'aurais pas besoin ! En tout cas merci encore de votre gentilesse.
Robin
Hors ligne
#12 Le 28/12/2015, à 18:24
- Babdu89
Re : [Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
@Robin10.
Tu vois le résultat de l'ajout UEFI dans ton titre...
Le spécialistes se manifestent pour venir en aide...
@ malbo, le tuto ....quimperlé... est encore la bonne suggestion ?.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#13 Le 28/12/2015, à 18:27
- Robin10
Re : [Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
Ceci dit, je viens de réaliser (je suis un peu lent à l'allumage) que j'ai windows 10 et pas windows 8 comme sur le tuto, il n'y a pas de problème d'incompatibilité reporté windows 10 / ubuntu en dual boot ?
Hors ligne
#14 Le 28/12/2015, à 18:52
- malbo
Re : [Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
Babdu89, Robin10,
Le tuto "EFI un jeu d'enfant" du site "Libre à Quimperlé" est utilisable pour une installation en dual-boot avec Windows 10 à mon avis. Il y a peut-être quelques petites choses qui sont inadaptées à Windows 10 mais ça doit être peu important. Ceux à qui je l'ai conseillé pour un dual-boot avec Windows 10 n'ont pas signalé de problèmes.
Dernière modification par malbo (Le 28/12/2015, à 18:54)
Hors ligne
#15 Le 28/12/2015, à 19:04
- Robin10
Re : [Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
Super, merci beaucoup de l'info malbo ! Je vais essayer de m'en sortir.
Hors ligne
#16 Le 29/12/2015, à 02:22
- Robin10
Re : [Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
Rebonjour,
J'ai essayé l'installation avec cet méthode, mais malheureusement je n'obtient pas la page de démarrage qui doit me donner le choix entre Ubuntu et Windows, windows se lance automatiquement comme d'habitude.
J'ai essayé de désactiver le safe boot, mais on dirait que ca n'a pas changé grand chose à ce niveau.
L'installation c'est plutôt bien passé, j'ai eu le message d'Ubuntu qui me disait que c'est fini et que je n'avais plus qu'à relancer la machine.
Le seul problème dont j'ai eu conscience est qu’après avoir éteint l'ordinateur, comme j'ai installé à partir d'un DVD, j'ai eu comme d'habitude l'écran qui me disait d'enlever le DVD, de refermer le lecteur et de presser entrée, mais le faire ne m'a pas permis d'éteindre la machine. Du coup, j'ai attendu ~45min puis j'ai éteint à la bourrin avec le bouton de la machine, après avoir essayé d'ouvrir/fermer le lecteur puis entrée plusieurs fois.
Me voilà donc un peu décu et désemparé... Toute aide serait encore la bienvenue ! (n'hésitez pas à me demander des détails)
Robin
Hors ligne
#17 Le 29/12/2015, à 07:31
- malbo
Re : [Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
Je te prie de faire un Boot-Info comme tu l'as déjà fait dans le post #3 (depuis une session live) et de donner l'URL de ce Boot-Info dans ta réponse.
Hors ligne
#18 Le 29/12/2015, à 13:03
- Robin10
Re : [Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
Voilà le rapport boot-info : http://paste.ubuntu.com/14257901/
Merci pour ton aide, j'espère ne pas avoir fait trop de bêtises !
Hors ligne
#19 Le 29/12/2015, à 14:02
- Babdu89
Re : [Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
Bonjour.
@Bougron et malbo.
Pour parfaire mon apprentissage...
En considérant ce que je dis post#9
Dans le boot info fichier efibootmgr -v
Pour moi la machine tente de démarrer sur le lecteur CD/DVD.
Puis démarre ensuite sur Windows Boot Manager HD(1,800,82000,c81fa112-9a98-4a70-
=================== efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 2002,0001,0002,2001,2004
Boot0000* Internal CD/DVD ROM Drive (UEFI) ACPI(a0341d0,0)PCI(1f,2)03120a00010000000000CD-ROM(1,7c6fa,11c0)RC
Boot0001* Windows Boot Manager HD(1,800,82000,c81fa112-9a98-4a70-acb1-b65667a62a82)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0002* ubuntu HD(1,800,82000,c81fa112-9a98-4a70-acb1-b65667a62a82)File(EFIubuntushimx64.efi)
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot3001* Internal Hard Disk or Solid State Disk RC
Mais bon, si le diagnostique est bon?. Comment changer çà, la je coince...
La réparation recommandée peut-être mais sans DVD et Clé usb en place. Non??...
Édit.
Situation peut-être du à ceci
Ronin10 a écrit;
Le seul problème dont j'ai eu conscience est qu’après avoir éteint l'ordinateur, comme j'ai installé à partir d'un DVD, j'ai eu comme d'habitude l'écran qui me disait d'enlever le DVD, de refermer le lecteur et de presser entrée, mais le faire ne m'a pas permis d'éteindre la machine. Du coup, j'ai attendu ~45min puis j'ai éteint à la bourrin avec le bouton de la machine, après avoir essayé d'ouvrir/fermer le lecteur puis entrée plusieurs fois.
@+. Babdu89 .
Dernière modification par Babdu89 (Le 29/12/2015, à 14:14)
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#20 Le 29/12/2015, à 14:22
- Robin10
Re : [Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
Je crois que j'ai essayé de rechanger l'ordre manuellement du boot pour remettre le boot de la machine en 1er, mais ca n'a rien changé, c'est toujours windows qui se lance. La forcément j'ai du remettre le boot du CD/DVD en premier pour pouvoir lancer une live session !
Hors ligne
#21 Le 30/12/2015, à 08:23
- malbo
Re : [Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
Ton Boot-Info dont tu as donné le lien dans le post #18 est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/Boot/bootx64.efi /EFI/ubuntu/MokManager.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi
/EFI/HP/BIOSUpdate/CryptRSA.efi
/EFI/HP/BIOSUpdate/CryptRSA32.efi
/EFI/HP/BIOSUpdate/HpBiosMgmt.efi
/EFI/HP/BIOSUpdate/HpBiosMgmt32.efi
/EFI/HP/SystemDiags/CryptRSA.efi
/EFI/HP/SystemDiags/CryptRSA32.efi
/EFI/HP/SystemDiags/HpSysDiags.efi
/EFI/HP/SystemDiags/HpSysDiags32.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootmgr.efi
/EFI/Microsoft/Boot/memtest.efi
sda2: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /Windows/System32/winload.exe
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sda7: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda8: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 534,527 532,480 EFI System partition
/dev/sda2 534,528 796,671 262,144 Microsoft Reserved Partition (Windows)
/dev/sda3 796,672 1,716,336,639 1,715,539,968 Data partition (Windows/Linux)
/dev/sda4 1,921,138,688 1,922,662,399 1,523,712 Windows Recovery Environment (Windows)
/dev/sda5 1,922,662,400 1,953,517,567 30,855,168 Windows Recovery Environment (Windows)
/dev/sda6 1,716,336,640 1,777,776,093 61,439,454 Data partition (Linux)
/dev/sda7 1,777,776,640 1,785,968,639 8,192,000 Swap partition (Linux)
/dev/sda8 1,785,968,640 1,921,138,687 135,170,048 Data partition (Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 8C84-F3EB vfat
/dev/sda3 1E0C61090C60DCF1 ntfs Windows
/dev/sda4 648AEFE58AEFB1AA ntfs WINRE
/dev/sda5 C642CE7D42CE71AB ntfs RECOVERY
/dev/sda6 c0061909-32c5-4339-8e74-7a2bbef9083c ext4
/dev/sda7 d9fc14d0-d1d2-4304-8f40-3ecbeb2e68ae swap
/dev/sda8 98cc2c7e-dfd3-4576-93ba-10af987ff79c ext4
/dev/sr0 iso9660 Ubuntu 14.04.3 LTS amd64
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Dec 29 12:01 ata-HGST_HTS541010A9E680_JD100ACH3S37VK -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 29 11:40 ata-HGST_HTS541010A9E680_JD100ACH3S37VK-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 29 11:40 ata-HGST_HTS541010A9E680_JD100ACH3S37VK-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 29 12:01 ata-HGST_HTS541010A9E680_JD100ACH3S37VK-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Dec 29 12:01 ata-HGST_HTS541010A9E680_JD100ACH3S37VK-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Dec 29 12:01 ata-HGST_HTS541010A9E680_JD100ACH3S37VK-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Dec 29 11:40 ata-HGST_HTS541010A9E680_JD100ACH3S37VK-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Dec 29 11:40 ata-HGST_HTS541010A9E680_JD100ACH3S37VK-part7 -> ../../sda7
lrwxrwxrwx 1 root root 10 Dec 29 11:40 ata-HGST_HTS541010A9E680_JD100ACH3S37VK-part8 -> ../../sda8
lrwxrwxrwx 1 root root 9 Dec 29 11:40 ata-hp_DVDRW_GUB0N_M2BF7TF0128 -> ../../sr0
lrwxrwxrwx 1 root root 9 Dec 29 12:01 wwn-0x5000cca79af4c742 -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 29 11:40 wwn-0x5000cca79af4c742-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 29 11:40 wwn-0x5000cca79af4c742-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 29 12:01 wwn-0x5000cca79af4c742-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Dec 29 12:01 wwn-0x5000cca79af4c742-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Dec 29 12:01 wwn-0x5000cca79af4c742-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Dec 29 11:40 wwn-0x5000cca79af4c742-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Dec 29 11:40 wwn-0x5000cca79af4c742-part7 -> ../../sda7
lrwxrwxrwx 1 root root 10 Dec 29 11:40 wwn-0x5000cca79af4c742-part8 -> ../../sda8
lrwxrwxrwx 1 root root 9 Dec 29 11:40 wwn-0x5001480000000000 -> ../../sr0
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sr0 /cdrom iso9660 (ro,noatime)
=========================== sda6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 c0061909-32c5-4339-8e74-7a2bbef9083c
else
search --no-floppy --fs-uuid --set=root c0061909-32c5-4339-8e74-7a2bbef9083c
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-c0061909-32c5-4339-8e74-7a2bbef9083c' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 c0061909-32c5-4339-8e74-7a2bbef9083c
else
search --no-floppy --fs-uuid --set=root c0061909-32c5-4339-8e74-7a2bbef9083c
fi
linux /boot/vmlinuz-3.19.0-42-generic.efi.signed root=UUID=c0061909-32c5-4339-8e74-7a2bbef9083c ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.19.0-42-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-c0061909-32c5-4339-8e74-7a2bbef9083c' {
menuentry 'Ubuntu, avec Linux 3.19.0-42-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-42-generic-advanced-c0061909-32c5-4339-8e74-7a2bbef9083c' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 c0061909-32c5-4339-8e74-7a2bbef9083c
else
search --no-floppy --fs-uuid --set=root c0061909-32c5-4339-8e74-7a2bbef9083c
fi
echo 'Chargement de Linux 3.19.0-42-generic…'
linux /boot/vmlinuz-3.19.0-42-generic.efi.signed root=UUID=c0061909-32c5-4339-8e74-7a2bbef9083c ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.19.0-42-generic
}
menuentry 'Ubuntu, with Linux 3.19.0-42-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-42-generic-recovery-c0061909-32c5-4339-8e74-7a2bbef9083c' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 c0061909-32c5-4339-8e74-7a2bbef9083c
else
search --no-floppy --fs-uuid --set=root c0061909-32c5-4339-8e74-7a2bbef9083c
fi
echo 'Chargement de Linux 3.19.0-42-generic…'
linux /boot/vmlinuz-3.19.0-42-generic.efi.signed root=UUID=c0061909-32c5-4339-8e74-7a2bbef9083c ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.19.0-42-generic
}
menuentry 'Ubuntu, avec Linux 3.19.0-25-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-25-generic-advanced-c0061909-32c5-4339-8e74-7a2bbef9083c' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 c0061909-32c5-4339-8e74-7a2bbef9083c
else
search --no-floppy --fs-uuid --set=root c0061909-32c5-4339-8e74-7a2bbef9083c
fi
echo 'Chargement de Linux 3.19.0-25-generic…'
linux /boot/vmlinuz-3.19.0-25-generic root=UUID=c0061909-32c5-4339-8e74-7a2bbef9083c ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.19.0-25-generic
}
menuentry 'Ubuntu, with Linux 3.19.0-25-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-25-generic-recovery-c0061909-32c5-4339-8e74-7a2bbef9083c' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 c0061909-32c5-4339-8e74-7a2bbef9083c
else
search --no-floppy --fs-uuid --set=root c0061909-32c5-4339-8e74-7a2bbef9083c
fi
echo 'Chargement de Linux 3.19.0-25-generic…'
linux /boot/vmlinuz-3.19.0-25-generic root=UUID=c0061909-32c5-4339-8e74-7a2bbef9083c ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.19.0-25-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-efi-8C84-F3EB' {
insmod part_gpt
insmod fat
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 8C84-F3EB
else
search --no-floppy --fs-uuid --set=root 8C84-F3EB
fi
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda6 during installation
UUID=c0061909-32c5-4339-8e74-7a2bbef9083c / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=8C84-F3EB /boot/efi vfat defaults 0 1
# /home was on /dev/sda8 during installation
UUID=98cc2c7e-dfd3-4576-93ba-10af987ff79c /home ext4 defaults 0 2
# swap was on /dev/sda7 during installation
UUID=d9fc14d0-d1d2-4304-8f40-3ecbeb2e68ae none swap sw 0 0
--------------------------------------------------------------------------------
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/5698/mounts) leaked on lvs invocation. Parent PID 14841: bash
File descriptor 63 (pipe:[55890]) leaked on lvs invocation. Parent PID 14841: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-info 2015-12-29__12h01 ===================
boot-info version : 4ppa35
boot-sav version : 4ppa35
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa35
boot-info is executed in live-session (Ubuntu 14.04.3 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
ls: cannot access /home/usr/.config: No such file or directory
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda1@/efi/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
/dev/sda6:Ubuntu 14.04.3 LTS (14.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="8C84-F3EB" TYPE="vfat"
/dev/sda3: LABEL="Windows" UUID="1E0C61090C60DCF1" TYPE="ntfs"
/dev/sda4: LABEL="WINRE" UUID="648AEFE58AEFB1AA" TYPE="ntfs"
/dev/sda5: LABEL="RECOVERY" UUID="C642CE7D42CE71AB" TYPE="ntfs"
/dev/sda6: UUID="c0061909-32c5-4339-8e74-7a2bbef9083c" TYPE="ext4"
/dev/sda7: UUID="d9fc14d0-d1d2-4304-8f40-3ecbeb2e68ae" TYPE="swap"
/dev/sda8: UUID="98cc2c7e-dfd3-4576-93ba-10af987ff79c" TYPE="ext4"
/dev/sr0: LABEL="Ubuntu 14.04.3 LTS amd64" TYPE="iso9660"
1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Windows not detected by os-prober on sda3.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda1/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/bootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda5/EFI/Boot/bootx64.efi
=================== sda6/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Dec 28 23:32 grub.d
total 76
-rwxr-xr-x 1 root root 9424 Jun 26 2015 00_header
-rwxr-xr-x 1 root root 6058 May 13 2015 05_debian_theme
-rwxr-xr-x 1 root root 11608 Jun 26 2015 10_linux
-rwxr-xr-x 1 root root 10412 Jun 26 2015 20_linux_xen
-rwxr-xr-x 1 root root 1992 Mar 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 Jun 26 2015 30_os-prober
-rwxr-xr-x 1 root root 1416 Jun 26 2015 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Jun 26 2015 40_custom
-rwxr-xr-x 1 root root 216 Jun 26 2015 41_custom
-rw-r--r-- 1 root root 483 Jun 26 2015 README
=================== sda6/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda6: UUID=8C84-F3EB (sda1)
=================== efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 2002,0001,0002,2001,2004
Boot0000* Internal CD/DVD ROM Drive (UEFI) ACPI(a0341d0,0)PCI(1f,2)03120a00010000000000CD-ROM(1,7c6fa,11c0)RC
Boot0001* Windows Boot Manager HD(1,800,82000,c81fa112-9a98-4a70-acb1-b65667a62a82)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0002* ubuntu HD(1,800,82000,c81fa112-9a98-4a70-acb1-b65667a62a82)File(EFIubuntushimx64.efi)
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot3001* Internal Hard Disk or Solid State Disk RC
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda3 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda3.
sda4 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda4.
sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5.
sda6 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda6.
sda8 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda8.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA HGST HTS541010A9 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 274MB 273MB fat32 EFI system partition boot
2 274MB 408MB 134MB Microsoft reserved partition msftres
3 408MB 879GB 878GB ntfs Basic data partition msftdata
6 879GB 910GB 31.5GB ext4
7 910GB 914GB 4194MB linux-swap(v1)
8 914GB 984GB 69.2GB ext4
4 984GB 984GB 780MB ntfs Basic data partition hidden, diag
5 984GB 1000GB 15.8GB ntfs Basic data partition hidden, diag
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
Error: Can't have a partition outside the disk!
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA HGST HTS541010A9;
1:1049kB:274MB:273MB:fat32:EFI system partition:boot;
2:274MB:408MB:134MB::Microsoft reserved partition:msftres;
3:408MB:879GB:878GB:ntfs:Basic data partition:msftdata;
6:879GB:910GB:31.5GB:ext4::;
7:910GB:914GB:4194MB:linux-swap(v1)::;
8:914GB:984GB:69.2GB:ext4::;
4:984GB:984GB:780MB:ntfs:Basic data partition:hidden, diag;
5:984GB:1000GB:15.8GB:ntfs:Basic data partition:hidden, diag;
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
Error: Can't have a partition outside the disk!
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 931.5G
sda1 part vfat 260M
sda2 part 128M
sda3 part ntfs 818G Windows
sda4 part ntfs 744M WINRE
sda5 part ntfs 14.7G RECOVERY
sda6 part ext4 29.3G
sda7 part swap 3.9G
sda8 part ext4 64.5G
sr0 rom iso9660 1006M Ubuntu 14.04.3 LTS amd64
loop0 loop squashfs 962.1M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0
sda3 1 0 0 /mnt/boot-sav/sda3
sda4 1 0 0 /mnt/boot-sav/sda4
sda5 1 0 0 /mnt/boot-sav/sda5
sda6 1 0 0 /mnt/boot-sav/sda6
sda7 1 0 0 [SWAP]
sda8 1 0 0 /mnt/boot-sav/sda8
sr0 1 0 1 running /cdrom
loop0 1 1 0 /rofs
=================== mount:
/cow on / type overlay (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda6 on /mnt/boot-sav/sda6 type ext4 (rw)
/dev/sda8 on /mnt/boot-sav/sda8 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): acpi_thermal_rel autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hpet i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 input kmsg log mapper mcelog media0 mei0 mem memory_bandwidth net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 08 fe 1b |.X.MSDOS5.0.....|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 20 08 00 01 02 00 00 00 00 00 00 02 00 00 00 |. ..............|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 eb f3 84 8c 4e 4f 20 4e 41 4d 45 20 20 |..)....NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 56 40 88 4e 02 8a 56 |{......|.V@.N..V|
00000070 40 b4 41 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a |@.A..U..r...U.u.|
00000080 f6 c1 01 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd |...t..F..-.V@...|
00000090 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 |.s......f...@f..|
000000a0 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 |...?.......Af...|
000000b0 66 f7 e1 66 89 46 f8 83 7e 16 00 75 39 83 7e 2a |f..f.F..~..u9.~*|
000000c0 00 77 33 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 |.w3f.F.f........|
000000d0 00 e8 2c 00 e9 a8 03 a1 f8 7d 80 c4 7c 8b f0 ac |..,......}..|...|
000000e0 84 c0 74 17 3c ff 74 09 b4 0e bb 07 00 cd 10 eb |..t.<.t.........|
000000f0 ee a1 fa 7d eb e4 a1 7d 80 eb df 98 cd 16 cd 19 |...}...}........|
00000100 66 60 80 7e 02 00 0f 84 20 00 66 6a 00 66 50 06 |f`.~.... .fj.fP.|
00000110 53 66 68 10 00 01 00 b4 42 8a 56 40 8b f4 cd 13 |Sfh.....B.V@....|
00000120 66 58 66 58 66 58 66 58 eb 33 66 3b 46 f8 72 03 |fXfXfXfX.3f;F.r.|
00000130 f9 eb 2a 66 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 |..*f3.f..N.f....|
00000140 8a ca 66 8b d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 |..f..f....v....V|
00000150 40 8a e8 c0 e4 06 0a cc b8 01 02 cd 13 66 61 0f |@............fa.|
00000160 82 74 ff 81 c3 00 02 66 40 49 75 94 c3 42 4f 4f |.t.....f@Iu..BOO|
00000170 54 4d 47 52 20 20 20 20 00 00 00 00 00 00 00 00 |TMGR ........|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 44 69 |..............Di|
000001b0 73 6b 20 65 72 72 6f 72 ff 0d 0a 50 72 65 73 73 |sk error...Press|
000001c0 20 61 6e 79 20 6b 65 79 20 74 6f 20 72 65 73 74 | any key to rest|
000001d0 61 72 74 0d 0a 00 00 00 00 00 00 00 00 00 00 00 |art.............|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 ac 01 b9 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda3
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 28 0c 00 |........?....(..|
00000020 00 00 00 00 80 00 80 00 ff 0f 41 66 00 00 00 00 |..........Af....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 f1 dc 60 0c 09 61 0c 1e |..........`..a..|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda4
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 40 82 72 |........?....@.r|
00000020 00 00 00 00 80 00 80 00 ff 3f 17 00 00 00 00 00 |.........?......|
00000030 00 f8 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 aa b1 ef 8a e5 ef 8a 64 |...............d|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
ls sda5/efi:
ls sda5: Boot
bootmgr
bootmgr.efi
EFI
preload
Recovery
$RECYCLE.BIN
RP.ini
sources
System Volume Information . Please report this message to boot.repair@gmail.com
=================== hexdump -n512 -C /dev/sda5
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 80 99 72 |........?......r|
00000020 00 00 00 00 80 00 80 00 ff cf d6 01 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 ab 71 ce 42 7d ce 42 c6 |.........q.B}.B.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlay 1.9G 145M 1.8G 8% /
udev devtmpfs 1.9G 12K 1.9G 1% /dev
tmpfs tmpfs 387M 1.3M 386M 1% /run
/dev/sr0 iso9660 1006M 1006M 0 100% /cdrom
/dev/loop0 squashfs 963M 963M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 1.9G 1.2M 1.9G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.9G 80K 1.9G 1% /run/shm
none tmpfs 100M 64K 100M 1% /run/user
/dev/sda1 vfat 256M 57M 200M 23% /mnt/boot-sav/sda1
/dev/sda3 fuseblk 819G 57G 762G 7% /mnt/boot-sav/sda3
/dev/sda4 fuseblk 744M 359M 386M 49% /mnt/boot-sav/sda4
/dev/sda5 fuseblk 15G 13G 1.8G 89% /mnt/boot-sav/sda5
/dev/sda6 ext4 29G 4.4G 23G 16% /mnt/boot-sav/sda6
/dev/sda8 ext4 64G 52M 61G 1% /mnt/boot-sav/sda8
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 1 1953525167 976762583+ ee GPT
Partition 1 does not start on physical sector boundary.
Partition outside the disk detected.
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda6, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot use-standard-efi-file
=================== Final advice in case of suggested repair
If your computer reboots directly into Windows, try to change the boot order in your BIOS.
If your BIOS does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\...\grub*.efi
=================== User settings
The settings chosen by the user will not act on the boot.
Cette installation semble correcte. Le démarrage des ordis HP est souvent verrouillé sur Windows. La solution la plus simple et la plus fiable à mon avis, c'est de presser la touche F9 au démarrage pour faire apparaître le Boot Menu et de sélectionner "ubuntu" dans la liste proposée. Tu devras faire ça à chaque fois que tu voudras démarrer ton ordi sur Ubuntu parce que le démarrage par défaut continuera d'être sur Windows.
EDIT : il y a peut-être une solution alternative à tenter, c'est de faire comme dans ce fil ou celui-là
C'est à dire qu'il faudrait que tu réactives "Secure Boot" (toi tu l'as désactivé d'après ce qu'on peut voir dans le Boot-Info : "SecureBoot disabled"), puis que tu modifies la priorité de démarrage dans le système UEFI pour mettre "ubuntu" en priorité. Dans les fils dont j'ai donné les liens, on voit que ça fonctionne mais je ne suis pas certain que ça peut fonctionner dans ton modèle.
Dernière modification par malbo (Le 30/12/2015, à 08:46)
Hors ligne
#22 Le 30/12/2015, à 15:16
- Robin10
Re : [Résolu] Partitionnement UEFI/Installation dual boot avec Windows10
Bonjour,
Merci beaucoup pour ta réponse. En effet, F9 marche très bien, ca me parait être une bonne solution ! mais je jeterais quand même un oeil à ta solution alternative.
Merci beaucoup pour ton aide, ansi que tous ceux qui ont répondu, sans vous je ne m'en serais jamais sorti...
Joyeuses fêtes à vous, et merci encore !
Robin
Hors ligne