Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 03/01/2016, à 13:40

mamyzero

[RÉSOLU] Carte micro sd non reconnue

Bonjour tout le monde et surtout plein de Bonheur pour cette nouvelle Année

Je viens de récupérer une micro SD de 32 go que j'avais sur un appareil photo.
Je n'arrive pas à savoir ce qu'il y a dessus car elle n'est pas reconnue ni par Gparted, ni par Nautilus. En passant par "disque"
1451820605.png
Il met lecture seule..... mais je ne peux rien lire.
J'aimerais aussi , un fois sauvegardée (si j’arrive à l'ouvrir) la formater.

J'ai aussi essayé par le terminal, mais je ne suis pas sûre que ce soit la bonne formule et voici la réponse : 

genevieve@genevieve-Dimension-E521:~$ sudo fdisk -l
[sudo] password for genevieve: 

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 têtes, 63 secteurs/piste, 121601 cylindres, total 1953525168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets
Identifiant de disque : 0x0000abca

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sda1   *        2048   122882047    61440000   83  Linux
/dev/sda2       127074302  1953523711   913224705    5  Étendue
La partition 2 ne commence pas sur une frontière de cylindre physique.
/dev/sda3       122882048   127072255     2095104   82  partition d'échange Linux / Solaris
/dev/sda5       127074304   247619583    60272640   83  Linux
/dev/sda6       889038848  1953523711   532242432   83  Linux
/dev/sda7       247621632   889036799   320707584   83  Linux

Les entrées de la table de partitions ne sont pas dans l'ordre du disque

Disk /dev/sdb: 320.1 GB, 320072933376 bytes
255 têtes, 63 secteurs/piste, 38913 cylindres, total 625142448 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x000c83cb

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sdb1   *        2048   625141759   312569856   83  Linux
genevieve@genevieve-Dimension-E521:~$

Si vous pouviez m'aider à résoudre ce problème wink


Modération : merci d'utiliser des images de petite taille (300x300) ou des miniatures pointant sur ces images (Sur Toile Libre utiliser le troisième lien).

Dernière modification par mamyzero (Le 11/01/2016, à 13:29)

Hors ligne

#2 Le 03/01/2016, à 20:45

Bougron

Re : [RÉSOLU] Carte micro sd non reconnue

Bonjour

Il faudrait que tu débranches la clé, que tu la rebranches , que tu attendes 15 secondes et que tu fasses la commande suivante:

dmesg | tail -40

et que tu postes le résultat.

Dernière modification par Bougron (Le 03/01/2016, à 20:46)

Hors ligne

#3 Le 03/01/2016, à 22:12

J5012

Re : [RÉSOLU] Carte micro sd non reconnue

perso je vois d'apres la capture que le media micro sd n'est pas vu comme present : aucun media

verifie que tu as bien inseré la petite carte dans le bon sens jusqu'au bout du taquet ...
verifie que ton adapteur usb2sdcard prenne bien en compte la taille de 32go ...

Hors ligne

#4 Le 04/01/2016, à 12:17

mamyzero

Re : [RÉSOLU] Carte micro sd non reconnue

Merci à vous deux pour vos réponses

La réponse à la commande de Bougron (après 15s)

genevieve@genevieve-Dimension-E521:~$ dmesg | tail -40
[   27.805268] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[   27.805288] snd_hda_intel 0000:00:10.1: Disabling MSI
[   28.444029] sound hdaudioC0D0: autoconfig: line_outs=4 (0xd/0xe/0xf/0x11/0x0) type:speaker
[   28.444036] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   28.444039] sound hdaudioC0D0:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   28.444042] sound hdaudioC0D0:    mono: mono_out=0x0
[   28.444044] sound hdaudioC0D0:    inputs:
[   28.444048] sound hdaudioC0D0:      Rear Mic=0xc
[   28.444050] sound hdaudioC0D0:      Front Mic=0xb
[   28.444053] sound hdaudioC0D0:      Line=0x10
[   29.316528] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input7
[   29.316670] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input8
[   29.317003] input: HDA NVidia Line as /devices/pci0000:00/0000:00:10.1/sound/card0/input9
[   29.317108] input: HDA NVidia Speaker Front as /devices/pci0000:00/0000:00:10.1/sound/card0/input10
[   29.317211] input: HDA NVidia Speaker Surround as /devices/pci0000:00/0000:00:10.1/sound/card0/input11
[   29.317314] input: HDA NVidia Speaker CLFE as /devices/pci0000:00/0000:00:10.1/sound/card0/input12
[   29.317422] input: HDA NVidia Speaker Side as /devices/pci0000:00/0000:00:10.1/sound/card0/input13
[   29.317524] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:10.1/sound/card0/input14
[   29.536050] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   29.600051] floppy0: no floppy controllers found
[   29.600073] work still pending
[   29.860886] init: samba-ad-dc main process (810) terminated with status 1
[   32.816181] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[   32.816189] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[   32.851799] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   33.193971] init: plymouth-upstart-bridge main process ended, respawning
[   57.269447] audit_printk_skb: 105 callbacks suppressed
[   57.269456] audit: type=1400 audit(1451900538.706:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2290 comm="apparmor_parser"
[   57.269471] audit: type=1400 audit(1451900538.706:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2290 comm="apparmor_parser"
[   57.270087] audit: type=1400 audit(1451900538.706:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2290 comm="apparmor_parser"
[  191.952174] usb usb2-port4: disabled by hub (EMI?), re-enabling...
[  191.952194] usb 2-4: USB disconnect, device number 3
[  192.288078] usb 2-4: new low-speed USB device number 4 using ohci-pci
[  192.498078] usb 2-4: New USB device found, idVendor=0461, idProduct=4d15
[  192.498092] usb 2-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[  192.498099] usb 2-4: Product: USB Optical Mouse
[  192.510074] input: USB Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.0/0003:0461:4D15.0003/input/input15
[  192.510465] hid-generic 0003:0461:4D15.0003: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:0b.0-4/input0
[ 1478.168068] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 1511.128085] usb 1-1: reset high-speed USB device number 2 using ehci-pci
genevieve@genevieve-Dimension-E521:~$

Réponse à J5012

La petite carte est bien insérée, quant à l'adaptateur, comment savoir s'il prend en compte une 32 go ?
J'ai deux adaptateurs format carte sd et une clé usb "integral mobile card reader" où pour la petite carte, il est inscrit sous la fente : Micro SD/Micro SDHC/M2. hmm

Hors ligne

#5 Le 04/01/2016, à 13:36

Bougron

Re : [RÉSOLU] Carte micro sd non reconnue

Bonjour
J'ai vu cela 

[ 1478.168068] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 1511.128085] usb 1-1: reset high-speed USB device number 2 using ehci-pci

On en parle un peu dans internet... Pour le moment, j'ai vu qu'un montage manuel semble possible.

Afin d'en connaître un peu plus, peux-tu faire les commandes

dmesg | grep reset

et

ls -Rl /dev/disk

ainsi que cela

cat /sys/bus/usb/devices/*/bMaxPower

Dernière modification par Bougron (Le 04/01/2016, à 13:45)

Hors ligne

#6 Le 04/01/2016, à 13:55

Bougron

Re : [RÉSOLU] Carte micro sd non reconnue

Cette discussion est assez drôle.
Un essai ne coûte rien.

Tu feras

sudo modprobe usb-storage

Tu démonteras la clé, attendras 15 secondes, remonteras la clé, attendras 2 minutes et tu referas

cat /proc/version
dmesg | tail -40

Tu donneras le résultat des deux commandes


J'ai aussi vu cela
"I have a USB flash stick that I thought Ubuntu couldn't install. I accidentally left it in, and 5 minutes later it recognized it. "

Donc dans une heure tu referas

dmesg | tail -40

Dernière modification par Bougron (Le 04/01/2016, à 14:06)

Hors ligne

#7 Le 04/01/2016, à 14:46

mamyzero

Re : [RÉSOLU] Carte micro sd non reconnue

Voilà le résultat de ton post #3

genevieve@genevieve-Dimension-E521:~$ dmesg | grep reset
[ 1478.168068] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 1511.128085] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 1572.184068] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 1605.208088] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 1638.168083] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 1671.128080] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 1704.152037] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 1737.176095] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 1770.200092] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 1803.160050] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 1836.120078] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 1869.144044] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 1902.168047] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 1935.192102] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 1968.152080] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2001.176119] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2034.136079] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2067.160036] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2100.184088] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2133.208083] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2166.168074] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2199.128087] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2232.152071] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2265.176070] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2298.200082] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2331.160069] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2364.120100] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2397.144065] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2430.168158] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2463.192068] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2496.216099] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2529.112063] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2562.136068] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2595.160073] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2628.184081] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2661.144068] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2694.168060] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2727.128078] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2760.152071] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2793.176077] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2826.200079] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2859.160081] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2892.120073] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2925.144090] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2958.168073] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2991.192079] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3024.152070] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3057.176094] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3090.136092] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3123.160117] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3156.184079] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3189.144334] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3222.168087] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3255.128112] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3288.152081] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3321.176083] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3354.200092] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3387.160077] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3420.120094] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3453.144087] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3486.168081] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3519.192080] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3552.216085] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3585.112130] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3618.136150] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3651.160090] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3684.184102] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3717.144060] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3750.168063] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3783.128139] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3816.152084] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3849.176095] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3882.200062] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3915.160079] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3948.184082] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 3981.144105] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4014.168078] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4047.192083] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4080.216091] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4113.176068] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4146.136053] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4179.160073] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4212.184055] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4245.144094] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4278.168091] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4311.128097] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4344.152093] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4377.176087] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4410.200066] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4443.160080] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4476.120099] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4509.144066] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4542.168088] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4575.192080] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4608.152118] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4641.176098] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4674.136069] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4707.160094] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4740.184083] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4773.144065] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4806.168115] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4839.128067] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4872.152099] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 6051.400081] usb 1-7: reset high-speed USB device number 5 using ehci-pci
[10872.152103] usb 1-1: reset high-speed USB device number 2 using ehci-pci
genevieve@genevieve-Dimension-E521:~$ ls -Rl /dev/disk
/dev/disk:
total 0
drwxr-xr-x 2 root root 460 janv.  4 12:24 by-id
drwxr-xr-x 2 root root  60 janv.  4 12:24 by-label
drwxr-xr-x 2 root root 120 janv.  4 12:24 by-path
drwxr-xr-x 2 root root 160 janv.  4 12:24 by-uuid

/dev/disk/by-id:
total 0
lrwxrwxrwx 1 root root  9 janv.  4 10:41 ata-ST1000DM003-9YN162_W1D12DFP -> ../../sda
lrwxrwxrwx 1 root root 10 janv.  4 10:41 ata-ST1000DM003-9YN162_W1D12DFP-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 janv.  4 10:41 ata-ST1000DM003-9YN162_W1D12DFP-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 janv.  4 10:41 ata-ST1000DM003-9YN162_W1D12DFP-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 janv.  4 10:41 ata-ST1000DM003-9YN162_W1D12DFP-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 janv.  4 10:41 ata-ST1000DM003-9YN162_W1D12DFP-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 janv.  4 10:41 ata-ST1000DM003-9YN162_W1D12DFP-part7 -> ../../sda7
lrwxrwxrwx 1 root root  9 janv.  4 10:41 ata-ST3320620AS_5QF2Q5P9 -> ../../sdb
lrwxrwxrwx 1 root root 10 janv.  4 10:41 ata-ST3320620AS_5QF2Q5P9-part1 -> ../../sdb1
lrwxrwxrwx 1 root root  9 janv.  4 10:41 ata-TSSTcorp_DVD+_-RW_TS-H653A -> ../../sr0
lrwxrwxrwx 1 root root  9 janv.  4 10:41 usb-TEAC_USB_HS-CF_Card_0000020C0F45-0:0 -> ../../sdc
lrwxrwxrwx 1 root root  9 janv.  4 10:41 usb-TEAC_USB_HS-MS_Card_0000020C0F45-0:2 -> ../../sde
lrwxrwxrwx 1 root root  9 janv.  4 10:41 usb-TEAC_USB_HS-SD_Card_0000020C0F45-0:3 -> ../../sdf
lrwxrwxrwx 1 root root  9 janv.  4 10:41 usb-TEAC_USB_HS-xD_SM_0000020C0F45-0:1 -> ../../sdd
lrwxrwxrwx 1 root root  9 janv.  4 10:41 wwn-0x5000c50049a61ac4 -> ../../sda
lrwxrwxrwx 1 root root 10 janv.  4 10:41 wwn-0x5000c50049a61ac4-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 janv.  4 10:41 wwn-0x5000c50049a61ac4-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 janv.  4 10:41 wwn-0x5000c50049a61ac4-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 janv.  4 10:41 wwn-0x5000c50049a61ac4-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 janv.  4 10:41 wwn-0x5000c50049a61ac4-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 janv.  4 10:41 wwn-0x5000c50049a61ac4-part7 -> ../../sda7

/dev/disk/by-label:
total 0
lrwxrwxrwx 1 root root 10 janv.  4 10:41 Doc -> ../../sdb1

/dev/disk/by-path:
total 0
lrwxrwxrwx 1 root root 9 janv.  4 10:41 pci-0000:00:0b.1-usb-0:1:1.0-scsi-0:0:0:0 -> ../../sdc
lrwxrwxrwx 1 root root 9 janv.  4 10:41 pci-0000:00:0b.1-usb-0:1:1.0-scsi-0:0:0:1 -> ../../sdd
lrwxrwxrwx 1 root root 9 janv.  4 10:41 pci-0000:00:0b.1-usb-0:1:1.0-scsi-0:0:0:2 -> ../../sde
lrwxrwxrwx 1 root root 9 janv.  4 10:41 pci-0000:00:0b.1-usb-0:1:1.0-scsi-0:0:0:3 -> ../../sdf

/dev/disk/by-uuid:
total 0
lrwxrwxrwx 1 root root 10 janv.  4 10:41 12bcb497-fa9e-4472-9fb2-3b2eccbb6c89 -> ../../sda7
lrwxrwxrwx 1 root root 10 janv.  4 10:41 548f710d-9672-467c-899d-9fda20b3334a -> ../../sda6
lrwxrwxrwx 1 root root 10 janv.  4 10:41 62ca4cbd-e4bc-4dfc-958c-05e3638e6f13 -> ../../sda5
lrwxrwxrwx 1 root root 10 janv.  4 10:41 75f0e2cf-c6fd-42d0-94fc-9ef83bc13bc1 -> ../../sda1
lrwxrwxrwx 1 root root 10 janv.  4 10:41 b27c4f28-7381-48f2-b098-908e8357383a -> ../../sda3
lrwxrwxrwx 1 root root 10 janv.  4 10:41 b635c4f4-eee3-4711-966f-bce8e9110b54 -> ../../sdb1
genevieve@genevieve-Dimension-E521:~$ cat /sys/bus/usb/devices/*/bMaxPower
500mA
100mA
100mA
0mA
0mA
genevieve@genevieve-Dimension-E521:~$ cat /sys/bus/usb/devices/*/bMaxPowercat /sys/bus/usb/devices/*/bMaxPowercat /sys/bus/usb/devices/*/bMaxPowercat /sys/bus/usb/devices/*/bMaxPowercat /sys/bus/usb/devices/*/bMaxPowercat /sys/bus/usb/devices/*/bMaxPowercat /sys/bus/usb/devices/*/bMaxPower

Quant à ton poste #6, rassures-moi........ c'est pas une blague ?

Hors ligne

#8 Le 04/01/2016, à 17:29

Bougron

Re : [RÉSOLU] Carte micro sd non reconnue

Si tu le prends comme une blague, on ne va pas avancer beaucoup.....

On a déjà vu que c'est parti en boucle.
On voit le début de la boucle        à la  1478eme seconde   et 168068 millisecondes après le boot
On voit que cela bouclait encore   à  la  4872eme seconde   et 152099 millisecondes après le boot
On peut donc dire que le test une heure est fait.

Je renouvelle donc ma demande de connaître la version ubuntu que tu utilises.

cat /proc/version

Je te propose donc de recharger le firwmare USB car je suis dans le brouillard et la réponse fournie  en version 13.10

scsi2 : usb-storage 1-5:1.0
usbcore: registered new interface driver usb-storage
[b]usb 1-5: reset high-speed USB device number 2 using ehci-pci
usb 1-5: reset high-speed USB device number 2 using ehci-pci[/b]
  		
how to solve this? – Shah Rizan Jan 31 '14 at 12:16
add a comment
I solved it by loading the usb-storage module again
$> modprobe usb-storage
Then unplugging and re-plugging the USB drive.

Dans l'échange est la seule pour le moment que j'ai trouvée qui aboutit à un résultat positif, les autres partant sur un bug logiciel....
Lorsque cette action de rechargement des modules s'opère, il est possible que l'OS s'aperçoive qu'il y a une carte SD de connectée et charge alors le module de gestion qui convient afin de faire cesser la boucle.

sudo modprobe usb-storage

Si cette commande fait des erreurs, tu les indiques.

tu attendras une minute et tu feras la commande

dmesg | tail -300

Cela permettra de voir ce qui se passe pendant le chargement de ces modules.
Comme je n'ai aucune idée du nombre de lignes qui seront utilisées, j'ai mis 300 alors que peut-être 100 suffit.; mais je préfère en demander plus que pas assez.

Dernière modification par Bougron (Le 04/01/2016, à 17:35)

Hors ligne

#9 Le 05/01/2016, à 12:31

mamyzero

Re : [RÉSOLU] Carte micro sd non reconnue

Bonjour, En effet j'ai oublié de mentionner la version.... je suis sous Lubuntu

genevieve@genevieve-Dimension-E521:~$ cat /proc/version
Linux version 3.16.0-34-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #47~14.04.1-Ubuntu SMP Fri Apr 10 17:49:51 UTC 2015
genevieve@genevieve-Dimension-E521:~$ 
genevieve@genevieve-Dimension-E521:~$ cat /proc/version
Linux version 3.16.0-34-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #47~14.04.1-Ubuntu SMP Fri Apr 10 17:49:51 UTC 2015
genevieve@genevieve-Dimension-E521:~$ scsi2 : usb-storage 1-5:1.0
scsi2 : commande introuvable
genevieve@genevieve-Dimension-E521:~$ usbcore: registered new interface driver usb-storage
usbcore: : commande introuvable
genevieve@genevieve-Dimension-E521:~$ [b]usb 1-5: reset high-speed USB device number 2 using ehci-pci
[b]usb : commande introuvable
genevieve@genevieve-Dimension-E521:~$ usb 1-5: reset high-speed USB device number 2 using ehci-pci[/b]
La commande « usb » est introuvable, vouliez-vous dire :
 La commande « jsb » du paquet « jsonbot » (universe)
 La commande « sb » du paquet « lrzsz » (universe)
usb : commande introuvable
genevieve@genevieve-Dimension-E521:~$   

Ce matin j'ai mis la carte dans l'adaptateur USB. Elle est visible, mais je ne peux toujours pas la formater ni supprimer les dossiers, car elle est en lecture seule.

@+
Display all 159 possibilities? (y or n)
2015-04-15-192853_1280x1024_scrot.png
2015-04-16-110312_1280x1024_scrot.png
2015-04-19-113708_1280x1024_scrot.png
2015-04-19-113713_1280x1024_scrot.png
2015-04-24-111555_1280x1024_scrot.png
2015-04-26-131201_1280x1024_scrot.png
2015-04-26-134027_1280x1024_scrot.png
2015-04-26-134039_1280x1024_scrot.png
2015-04-28-195528_1280x1024_scrot.png
2015-05-07-090059_1280x1024_scrot.png
2015-05-07-090227_1280x1024_scrot.png
2015-05-07-090232_1280x1024_scrot.png
2015-05-09-100734_1280x1024_scrot.png
2015-05-09-100929_1280x1024_scrot.png
2015-05-13-131710_1280x1024_scrot.png
2015-06-17-123404_1280x1024_scrot.png
2015-07-07-201941_1280x1024_scrot.png
2015-07-12-103326_1280x1024_scrot.png
2015-07-28-121732_1280x1024_scrot.png
2015-07-28-123156_1280x1024_scrot.png
2015-07-29-093213_1280x1024_scrot.png
2015-07-29-114557_1280x1024_scrot.png
2015-08-29-120806_1280x1024_scrot.png
2015-09-07-115308_1280x1024_scrot.png
2015-09-07-125332_1280x1024_scrot.png
2015-09-07-130757_1280x1024_scrot.png
2015-09-07-130836_1280x1024_scrot.png
2015-09-08-133237_1280x1024_scrot.png
2015-09-13-100132_1280x1024_scrot.png
2015-09-17-134656_1280x1024_scrot.png
2015-09-17-170740_1280x1024_scrot.png
2015-09-25-193248_1280x1024_scrot.png
2015-10-04-114700_1280x1024_scrot.png
2015-10-04-115909_1280x1024_scrot.png
2015-10-04-120104_1280x1024_scrot.png
2015-10-04-132057_1280x1024_scrot.png
2015-10-04-133955_1280x1024_scrot.png
2015-10-06-111824_1280x1024_scrot.png
2015-10-06-111839_1280x1024_scrot.png
2015-10-06-111903_1280x1024_scrot.png
2015-10-13-201711_1280x1024_scrot.png
2015-10-16-110845_1280x1024_scrot.png
2015-10-16-111551_1280x1024_scrot.png
2015-10-16-112337_1280x1024_scrot.png
2015-10-16-113054_1280x1024_scrot.png
2015-10-17-103601_1280x1024_scrot.png
2015-10-17-114746_1280x1024_scrot.png
2015-10-17-122500_1280x1024_scrot.png
2015-10-17-123925_1280x1024_scrot.png
2015-10-17-124852_1280x1024_scrot.png
2015-10-17-125025_1280x1024_scrot.png
2015-10-17-125142_1280x1024_scrot.png
2015-10-17-125221_1280x1024_scrot.png
2015-10-17-125424_1280x1024_scrot.png
2015-10-22-103400_1280x1024_scrot.png
2015-10-23-104011_1280x1024_scrot.png
2015-11-01-120417_1280x1024_scrot.png
2015-11-02-125207_1280x1024_scrot.png
2015-11-05-121607_1280x1024_scrot.png
2015-11-08-125152_1280x1024_scrot.png
2015-11-15-190859_1280x1024_scrot.png
2015-11-18-124350_1280x1024_scrot.png
2015-11-18-124714_1280x1024_scrot.png
2015-11-24-191105_1280x1024_scrot.png
2015-11-30-103753_1280x1024_scrot.png
2015-12-09-195140_1280x1024_scrot.png
2015-12-09-195311_1280x1024_scrot.png
2015-12-15-133407_1280x1024_scrot.png
2015-12-18-124557_1280x1024_scrot.png
2015-12-19-141604_1280x1024_scrot.png
2015-12-21-184545_1280x1024_scrot.png
2015-12-27-140858_1280x1024_scrot.png
2015-12-30-113555_1280x1024_scrot.png
2015-12-30-113610_1280x1024_scrot.png
.adobe/
.asoundrc
Bande pour ponceuse : tout savoir sur la bande de ponceuse.html
.bash_history
.bash_logout
.bashrc
brother/
brother.tar.gz
brother.tar.gz.1
brother.tar.gz.2
brother.tar.gz.3
Bureau/
.cache/
.cartes-5927d115ee46d14e0c7ea25650a92440/
cd-boot-liveusb.iso
Comparaison.gnumeric
.config/
Croquettes/
.dbus/
.dmrc
Document1.abw.saved
Documents/
.dropbox/
Dropbox/
.dropbox-dist/
dwhelper/
.gconf/
.gimp-2.8/
.gksu.lock
.gnome/
.gnome2/
.gnome2_private/
.gnupg/
.googleearth/
.gphoto/
.gscan2pdf
.gstreamer-0.10/
.hardinfo/
.icons/
Images/
.kde/
kubuntu-14.04-desktop-i386.iso
.local/
.macromedia/
Mail/
Merveilleuse couleurs.png
Modèles/
.mozilla/
.mplayer/
.mtoolsrc
.mtpaint
.multisystem/
.multisystem-theme
Musique/
nohup.out
.nv/
.nvidia-settings-rc
ophtalmo.jpg
.pki/
plpbt-5.0.15/
print.pdf
.profile
Public/
.purple/
genevieve@genevieve-Dimension-E521:~$    Jan 31 '14 at 12:16
> add a comment
> I solved it by loading the usb-storage module again
> $> modprobe usb-storage
> Then unplugging and re-plugging the USB drive
genevieve@genevieve-Dimension-E521:~$ sudo modprobe usb-storage
[sudo] password for genevieve: 
genevieve@genevieve-Dimension-E521:~$

A priori roll ...... pas d'erreurs

Hors ligne

#10 Le 05/01/2016, à 12:50

Bougron

Re : [RÉSOLU] Carte micro sd non reconnue

Bonjour

Je ne comprends pas trop comment elle est arrivée en lecture seule .

Peux-tu refaire la commande 

dmesg | tail -300

on devrait y trouver trace de ce montage.

Hors ligne

#11 Le 05/01/2016, à 13:12

mamyzero

Re : [RÉSOLU] Carte micro sd non reconnue

Voilà

genevieve@genevieve-Dimension-E521:~$ dmesg | tail -300
[    1.042913] NET: Registered protocol family 17
[    1.042931] Key type dns_resolver registered
[    1.043198] Using IPI No-Shortcut mode
[    1.043340] Loading compiled-in X.509 certificates
[    1.047244] Loaded X.509 cert 'Magrathea: Glacier signing key: 7521b74e6d2d7cf530acbc55d662af90b2c3eed4'
[    1.047266] registered taskstats version 1
[    1.050055] Key type trusted registered
[    1.055063] Key type encrypted registered
[    1.055076] AppArmor: AppArmor sha1 policy hashing enabled
[    1.055081] ima: No TPM chip found, activating TPM-bypass!
[    1.055106] evm: HMAC attrs: 0x1
[    1.055460]   Magic number: 0:632:977
[    1.055587] rtc_cmos 00:02: setting system clock to 2016-01-05 08:57:40 UTC (1451984260)
[    1.055748] powernow_k8: fid 0xe (2200 MHz), vid 0x8
[    1.055750] powernow_k8: fid 0xc (2000 MHz), vid 0xa
[    1.055752] powernow_k8: fid 0xa (1800 MHz), vid 0xc
[    1.055753] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[    1.055807] powernow_k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2 cpu cores) (version 2.20.00)
[    1.055818] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.055819] EDD information not available.
[    1.055909] PM: Hibernation image not present or could not be loaded.
[    1.292028] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.314887] isapnp: No Plug & Play device found
[    1.315424] Freeing unused kernel memory: 892K (c1a0e000 - c1aed000)
[    1.315481] Write protecting the kernel text: 6748k
[    1.315577] Write protecting the kernel read-only data: 2900k
[    1.315578] NX-protecting the kernel data: 5540k
[    1.334637] systemd-udevd[98]: starting version 204
[    1.374274] Floppy drive(s): fd0 is 1.44M
[    1.382948] sata_nv 0000:00:0e.0: version 3.5
[    1.383250] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[    1.383271] sata_nv 0000:00:0e.0: Using SWNCQ mode
[    1.384651] scsi0 : sata_nv
[    1.397508] scsi1 : sata_nv
[    1.397624] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 21
[    1.397628] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 21
[    1.398020] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[    1.398046] sata_nv 0000:00:0f.0: Using SWNCQ mode
[    1.404778] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[    1.404833] scsi2 : sata_nv
[    1.407641] scsi3 : sata_nv
[    1.407744] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 20
[    1.407751] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 20
[    1.424111] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00
[    1.424122] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[    1.424127] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[    1.424131] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[    1.464142] ssb: Sonics Silicon Backplane found on PCI device 0000:04:07.0
[    1.464194] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[    1.484505] b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:18:8b:85:9c:d2
[    1.497542] usb 1-1: New USB device found, idVendor=0644, idProduct=0200
[    1.497546] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.497549] usb 1-1: Product: CA-200
[    1.497552] usb 1-1: Manufacturer: TEAC
[    1.497554] usb 1-1: SerialNumber: 0000020C0F45
[    1.864038] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.872038] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.872479] ata1.00: ATA-8: ST1000DM003-9YN162, CC4C, max UDMA/133
[    1.872482] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.873687] usb-storage 1-1:1.0: USB Mass Storage device detected
[    1.874052] scsi4 : usb-storage 1-1:1.0
[    1.874183] usbcore: registered new interface driver usb-storage
[    1.879516] usbcore: registered new interface driver uas
[    1.880211] ata3.00: ATAPI: TSSTcorp DVD+/-RW TS-H653A, D300, max UDMA/33
[    1.880216] ata3.00: applying bridge limits
[    1.888372] ata1.00: configured for UDMA/133
[    1.888550] scsi 0:0:0:0: Direct-Access     ATA      ST1000DM003-9YN1 CC4C PQ: 0 ANSI: 5
[    1.888941] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.888992] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.888996] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.889070] sd 0:0:0:0: [sda] Write Protect is off
[    1.889074] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.889103] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.896227] ata3.00: configured for UDMA/33
[    1.936180]  sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[    1.936911] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.040050] usb 2-3: new low-speed USB device number 2 using ohci-pci
[    2.254056] usb 2-3: New USB device found, idVendor=413c, idProduct=2005
[    2.254062] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.254066] usb 2-3: Product: DELL USB Keyboard
[    2.254068] usb 2-3: Manufacturer: DELL
[    2.267607] hidraw: raw HID events driver (C) Jiri Kosina
[    2.280565] usbcore: registered new interface driver usbhid
[    2.280572] usbhid: USB HID core driver
[    2.285923] input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.0/0003:413C:2005.0001/input/input5
[    2.286081] hid-generic 0003:413C:2005.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:0b.0-3/input0
[    2.356043] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.403457] ata2.00: native sectors (586072368) is smaller than sectors (625142448)
[    2.403466] ata2.00: ATA-7: ST3320620AS, 3.ADG, max UDMA/133
[    2.403469] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.432037] usb 2-4: new low-speed USB device number 3 using ohci-pci
[    2.470090] ata2.00: configured for UDMA/133
[    2.470275] scsi 1:0:0:0: Direct-Access     ATA      ST3320620AS      G    PQ: 0 ANSI: 5
[    2.470657] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.470714] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.470876] sd 1:0:0:0: [sdb] Write Protect is off
[    2.470880] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.470906] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.471807] scsi 2:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-H653A D300 PQ: 0 ANSI: 5
[    2.492950] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    2.492953] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.493166] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.493282] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    2.509873]  sdb: sdb1
[    2.510212] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.641047] usb 2-4: New USB device found, idVendor=0461, idProduct=4d15
[    2.641053] usb 2-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.641056] usb 2-4: Product: USB Optical Mouse
[    2.651928] input: USB Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.0/0003:0461:4D15.0002/input/input6
[    2.652140] hid-generic 0003:0461:4D15.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:0b.0-4/input0
[    2.804039] ata4: SATA link down (SStatus 0 SControl 300)
[    2.882298] scsi 4:0:0:0: Direct-Access     TEAC     USB   HS-CF Card 4.00 PQ: 0 ANSI: 0
[    2.885916] scsi 4:0:0:1: Direct-Access     TEAC     USB   HS-xD/SM   4.00 PQ: 0 ANSI: 0
[    2.889914] scsi 4:0:0:2: Direct-Access     TEAC     USB   HS-MS Card 4.00 PQ: 0 ANSI: 0
[    2.893167] scsi 4:0:0:3: Direct-Access     TEAC     USB   HS-SD Card 4.00 PQ: 0 ANSI: 0
[    2.893699] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    2.894225] sd 4:0:0:1: Attached scsi generic sg4 type 0
[    2.895480] sd 4:0:0:2: Attached scsi generic sg5 type 0
[    2.896131] sd 4:0:0:3: Attached scsi generic sg6 type 0
[    3.034534] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[    3.057299] sd 4:0:0:2: [sde] Attached SCSI removable disk
[    3.061410] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[    3.066535] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[    4.400050] floppy0: no floppy controllers found
[   10.551805] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[   10.551811] EXT4-fs (sda1): write access will be enabled during recovery
[   10.671913] EXT4-fs (sda1): recovery complete
[   10.709129] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   10.742443] random: nonblocking pool is initialized
[   25.343337] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   25.843936] systemd-udevd[374]: starting version 204
[   26.058854] lp: driver loaded but no devices found
[   26.091626] ppdev: user-space parallel port driver
[   26.177489] Floppy drive(s): fd0 is 1.44M
[   26.246962] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   26.276064] [drm] Initialized drm 1.1.0 20060810
[   26.288496] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[   26.288583] i2c i2c-1: nForce2 SMBus adapter at 0x1c40
[   26.389975] Bluetooth: Core ver 2.19
[   26.390605] NET: Registered protocol family 31
[   26.390609] Bluetooth: HCI device and connection manager initialized
[   26.390618] Bluetooth: HCI socket layer initialized
[   26.390622] Bluetooth: L2CAP socket layer initialized
[   26.390643] Bluetooth: SCO socket layer initialized
[   26.411787] Bluetooth: RFCOMM TTY layer initialized
[   26.411802] Bluetooth: RFCOMM socket layer initialized
[   26.411814] Bluetooth: RFCOMM ver 1.11
[   26.430893] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   26.432810] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   26.432817] Bluetooth: BNEP filters: protocol multicast
[   26.432828] Bluetooth: BNEP socket layer initialized
[   26.541628] audit: type=1400 audit(1451984285.982:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=471 comm="apparmor_parser"
[   26.541639] audit: type=1400 audit(1451984285.982:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=471 comm="apparmor_parser"
[   26.542966] audit: type=1400 audit(1451984285.982:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=471 comm="apparmor_parser"
[   26.605141] kvm: Nested Virtualization enabled
[   26.635373] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   26.883402] init: cups main process (483) killed by HUP signal
[   26.883416] init: cups main process ended, respawning
[   26.929308] audit: type=1400 audit(1451984286.370:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=566 comm="apparmor_parser"
[   26.929320] audit: type=1400 audit(1451984286.370:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=566 comm="apparmor_parser"
[   26.929326] audit: type=1400 audit(1451984286.370:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=566 comm="apparmor_parser"
[   26.930043] audit: type=1400 audit(1451984286.370:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=566 comm="apparmor_parser"
[   26.930052] audit: type=1400 audit(1451984286.370:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=566 comm="apparmor_parser"
[   26.930370] audit: type=1400 audit(1451984286.370:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=566 comm="apparmor_parser"
[   26.938594] audit: type=1400 audit(1451984286.378:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=568 comm="apparmor_parser"
[   27.047212] nvidia: module license 'NVIDIA' taints kernel.
[   27.047236] Disabling lock debugging due to kernel taint
[   27.069811] nvidia: module verification failed: signature and/or  required key missing - tainting kernel
[   27.086654] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[   27.086691] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=none
[   27.089105] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:03:00.0 on minor 0
[   27.089140] NVRM: loading NVIDIA UNIX x86 Kernel Module  304.131  Sun Nov  8 21:44:08 PST 2015
[   27.127200] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[   27.127220] snd_hda_intel 0000:00:10.1: Disabling MSI
[   27.365402] init: failsafe main process (598) killed by TERM signal
[   27.768034] sound hdaudioC0D0: autoconfig: line_outs=4 (0xd/0xe/0xf/0x11/0x0) type:speaker
[   27.768042] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   27.768045] sound hdaudioC0D0:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   27.768048] sound hdaudioC0D0:    mono: mono_out=0x0
[   27.768050] sound hdaudioC0D0:    inputs:
[   27.768053] sound hdaudioC0D0:      Rear Mic=0xc
[   27.768056] sound hdaudioC0D0:      Front Mic=0xb
[   27.768059] sound hdaudioC0D0:      Line=0x10
[   28.632619] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input7
[   28.632751] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input8
[   28.632869] input: HDA NVidia Line as /devices/pci0000:00/0000:00:10.1/sound/card0/input9
[   28.632975] input: HDA NVidia Speaker Front as /devices/pci0000:00/0000:00:10.1/sound/card0/input10
[   28.633078] input: HDA NVidia Speaker Surround as /devices/pci0000:00/0000:00:10.1/sound/card0/input11
[   28.633194] input: HDA NVidia Speaker CLFE as /devices/pci0000:00/0000:00:10.1/sound/card0/input12
[   28.633308] input: HDA NVidia Speaker Side as /devices/pci0000:00/0000:00:10.1/sound/card0/input13
[   28.633416] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:10.1/sound/card0/input14
[   28.867359] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   29.022114] init: samba-ad-dc main process (811) terminated with status 1
[   29.200062] floppy0: no floppy controllers found
[   31.816183] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[   31.816185] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[   31.816257] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   32.775991] init: plymouth-upstart-bridge main process ended, respawning
[   56.839707] audit_printk_skb: 105 callbacks suppressed
[   56.839714] audit: type=1400 audit(1451984314.646:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2142 comm="apparmor_parser"
[   56.839726] audit: type=1400 audit(1451984314.646:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2142 comm="apparmor_parser"
[   56.840473] audit: type=1400 audit(1451984314.650:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2142 comm="apparmor_parser"
[  219.520140] usb usb2-port4: disabled by hub (EMI?), re-enabling...
[  219.520159] usb 2-4: USB disconnect, device number 3
[  219.864069] usb 2-4: new low-speed USB device number 4 using ohci-pci
[  220.074064] usb 2-4: New USB device found, idVendor=0461, idProduct=4d15
[  220.074076] usb 2-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[  220.074084] usb 2-4: Product: USB Optical Mouse
[  220.086105] input: USB Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.0/0003:0461:4D15.0003/input/input15
[  220.086975] hid-generic 0003:0461:4D15.0003: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:0b.0-4/input0
[  638.048191] usb usb2-port4: disabled by hub (EMI?), re-enabling...
[  638.048210] usb 2-4: USB disconnect, device number 4
[  638.376068] usb 2-4: new low-speed USB device number 5 using ohci-pci
[  638.586062] usb 2-4: New USB device found, idVendor=0461, idProduct=4d15
[  638.586074] usb 2-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[  638.586081] usb 2-4: Product: USB Optical Mouse
[  638.598054] input: USB Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.0/0003:0461:4D15.0004/input/input16
[  638.598456] hid-generic 0003:0461:4D15.0004: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:0b.0-4/input0
[  638.992169] usb usb2-port4: disabled by hub (EMI?), re-enabling...
[  638.992187] usb 2-4: USB disconnect, device number 5
[  639.332083] usb 2-4: new low-speed USB device number 6 using ohci-pci
[  639.542061] usb 2-4: New USB device found, idVendor=0461, idProduct=4d15
[  639.542073] usb 2-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[  639.542080] usb 2-4: Product: USB Optical Mouse
[  639.554043] input: USB Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.0/0003:0461:4D15.0005/input/input17
[  639.554429] hid-generic 0003:0461:4D15.0005: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:0b.0-4/input0
[ 1803.882183] audit: type=1400 audit(1451986061.690:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=4771 comm="apparmor_parser"
[ 1803.882201] audit: type=1400 audit(1451986061.690:51): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4771 comm="apparmor_parser"
[ 1803.883409] audit: type=1400 audit(1451986061.690:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4771 comm="apparmor_parser"
[ 3135.292081] usb 1-8: new high-speed USB device number 5 using ehci-pci
[ 3135.425410] usb 1-8: New USB device found, idVendor=058f, idProduct=6366
[ 3135.425422] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3135.425429] usb 1-8: Product: Mass Storage Device
[ 3135.425434] usb 1-8: Manufacturer: Generic
[ 3135.425440] usb 1-8: SerialNumber: 058F63666433
[ 3135.426054] usb-storage 1-8:1.0: USB Mass Storage device detected
[ 3135.426476] scsi5 : usb-storage 1-8:1.0
[ 3135.634663] keucr: module is from the staging directory, the quality is unknown, you have been warned.
[ 3135.635723] usbcore: registered new interface driver eucr
[ 3136.553480] scsi 5:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
[ 3136.554537] sd 5:0:0:0: Attached scsi generic sg7 type 0
[ 3137.197193] sd 5:0:0:0: [sdg] 61521920 512-byte logical blocks: (31.4 GB/29.3 GiB)
[ 3137.199299] sd 5:0:0:0: [sdg] Write Protect is off
[ 3137.199306] sd 5:0:0:0: [sdg] Mode Sense: 03 00 00 00
[ 3137.201302] sd 5:0:0:0: [sdg] No Caching mode page found
[ 3137.201310] sd 5:0:0:0: [sdg] Assuming drive cache: write through
[ 3137.210335]  sdg: sdg1
[ 3137.216307] sd 5:0:0:0: [sdg] Attached SCSI removable disk
[ 3137.893910] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3143.048639] FAT-fs (sdg1): error, fat_get_cluster: invalid cluster chain (i_pos 0)
[ 3143.048652] FAT-fs (sdg1): Filesystem has been set read-only
[ 3226.921312] usb 1-8: USB disconnect, device number 5
[ 3322.112695] sd 4:0:0:3: [sdf] 3987456 512-byte logical blocks: (2.04 GB/1.90 GiB)
[ 3322.118345] sd 4:0:0:3: [sdf] Write Protect is on
[ 3322.118353] sd 4:0:0:3: [sdf] Mode Sense: 23 00 80 00
[ 3322.145824]  sdf: sdf1
[ 3408.020287] sdf: detected capacity change from 2041577472 to 0
[ 3447.388075] usb 1-7: new high-speed USB device number 6 using ehci-pci
[ 3447.521537] usb 1-7: New USB device found, idVendor=058f, idProduct=6366
[ 3447.521550] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3447.521557] usb 1-7: Product: Mass Storage Device
[ 3447.521563] usb 1-7: Manufacturer: Generic
[ 3447.521568] usb 1-7: SerialNumber: 058F63666433
[ 3447.522136] usb-storage 1-7:1.0: USB Mass Storage device detected
[ 3447.523935] scsi6 : usb-storage 1-7:1.0
[ 3448.653594] scsi 6:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
[ 3448.654562] sd 6:0:0:0: Attached scsi generic sg7 type 0
[ 3449.297187] sd 6:0:0:0: [sdg] 61521920 512-byte logical blocks: (31.4 GB/29.3 GiB)
[ 3449.299293] sd 6:0:0:0: [sdg] Write Protect is off
[ 3449.299302] sd 6:0:0:0: [sdg] Mode Sense: 03 00 00 00
[ 3449.301299] sd 6:0:0:0: [sdg] No Caching mode page found
[ 3449.301307] sd 6:0:0:0: [sdg] Assuming drive cache: write through
[ 3449.311194]  sdg: sdg1
[ 3449.319318] sd 6:0:0:0: [sdg] Attached SCSI removable disk
[ 3449.644080] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3457.088493] FAT-fs (sdg1): error, fat_get_cluster: invalid cluster chain (i_pos 0)
[ 3457.088500] FAT-fs (sdg1): Filesystem has been set read-only
[ 3487.358191] FAT-fs (sdg1): error, fat_get_cluster: invalid cluster chain (i_pos 0)
[ 3547.461371] FAT-fs (sdg1): error, fat_get_cluster: invalid cluster chain (i_pos 0)
[ 5156.360549] usb 1-7: USB disconnect, device number 6
[ 5162.692069] usb 1-7: new high-speed USB device number 7 using ehci-pci
[ 5162.825408] usb 1-7: New USB device found, idVendor=058f, idProduct=6366
[ 5162.825421] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5162.825428] usb 1-7: Product: Mass Storage Device
[ 5162.825433] usb 1-7: Manufacturer: Generic
[ 5162.825438] usb 1-7: SerialNumber: 058F63666433
[ 5162.826010] usb-storage 1-7:1.0: USB Mass Storage device detected
[ 5162.827691] scsi7 : usb-storage 1-7:1.0
[ 5163.953611] scsi 7:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
[ 5163.960520] sd 7:0:0:0: Attached scsi generic sg7 type 0
[ 5164.725195] sd 7:0:0:0: [sdg] 61521920 512-byte logical blocks: (31.4 GB/29.3 GiB)
[ 5164.727298] sd 7:0:0:0: [sdg] Write Protect is off
[ 5164.727306] sd 7:0:0:0: [sdg] Mode Sense: 03 00 00 00
[ 5164.729441] sd 7:0:0:0: [sdg] No Caching mode page found
[ 5164.729450] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[ 5164.742342]  sdg: sdg1
[ 5164.750307] sd 7:0:0:0: [sdg] Attached SCSI removable disk
[ 5165.072893] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 5168.399225] FAT-fs (sdg1): error, fat_get_cluster: invalid cluster chain (i_pos 0)
[ 5168.399234] FAT-fs (sdg1): Filesystem has been set read-only
genevieve@genevieve-Dimension-E521:~$

Hors ligne

#12 Le 05/01/2016, à 14:07

Bougron

Re : [RÉSOLU] Carte micro sd non reconnue

Enfin , on y voit un montage normal avec une erreur signalée
"FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck". qui est la cause du montage en lecture seule.

3137.216307] sd 5:0:0:0: [sdg] Attached SCSI removable disk
[ 3137.893910] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3143.048639] FAT-fs (sdg1): error, fat_get_cluster: invalid cluster chain (i_pos 0)
[ 3143.048652] FAT-fs (sdg1): Filesystem has been set read-only
[ 3226.921312] usb 1-8: USB disconnect, device number 5
[ 3322.112695] sd 4:0:0:3: [sdf] 3987456 512-byte logical blocks: (2.04 GB/1.90 GiB)
[ 3322.118345] sd 4:0:0:3: [sdf] Write Protect is on
[ 3322.118353] sd 4:0:0:3: [sdf] Mode Sense: 23 00 80 00
[ 3322.145824]  sdf: sdf1
[ 3408.020287] sdf: detected capacity change from 2041577472 to 0

Vu les difficultés que tu as eu pour y avoir accès, je ne suis pas chaud pour réparer ce support.
Le plus simple est que tu sauvegardes la totalité des fichiers qui sont présents sur ce support et que tu le reformates en FAT16 ou en FAT32 par GPARTED après l'avoir démonté par ce même GPARTED

Peux-tu confirmer que tu as monté le support sur une autre entrée USB?

Dernière modification par Bougron (Le 05/01/2016, à 14:09)

Hors ligne

#13 Le 08/01/2016, à 14:11

mamyzero

Re : [RÉSOLU] Carte micro sd non reconnue

Bonjour.
Me revoilà. Ce n'est pas faute d'essayer, mais je n'y comprends rien. J'ai cru qu'enfin j'avais réussi de la formater, mais il n'en est rien. Ces fichiers et dossiers sont toujours là. Gparted reconnais la carte mais une fois démontée, il ne veut plus rien savoir ..... tout est grisé. Et si j'essayais de la formater par le terminal. Qu'en penses-tu ? Si oui, pourrais-tu me donner la formule.
@+

Hors ligne

#14 Le 08/01/2016, à 21:29

J5012

Re : [RÉSOLU] Carte micro sd non reconnue

perso ce qui m'embete c'est cete ligne :

[ 3143.048639] FAT-fs (sdg1): error, fat_get_cluster: invalid cluster chain (i_pos 0)

vu que c'est une memoire flash donc electronique, le cluster n'existe pas vraiment ... le terme invalid donne à penser que le systeme embarqué sur la memoire flash (oui ce qu'on appelle flash n'est pas seulement de la memoire) n'arrive pas à renvoyer des donnees valides (le cluster n'est pas present physiquement comme dans le disque dur mais correspond à une identification genre meta-donnees qui fait que le systeme embarqué sait quelles cellules de la memoire flash sont dans quel cluster)

le fs fat est fait de telle facon qu'on peut retirer une memoire flash ainsi formaté sans "abimer" les donnees recemment ecrites : il suffit pour cela que le systeme arrete d'y ecrire ... si la memoire flash est retiré en cours d'ecriture, ce sont les donnees en cours d'ecriture qui sont erronées (les cellules memoire du cluster) ... et non l'identification du cluster lui-meme ... sauf si la memoire flash a ete interrompue en cours de formattage : dans ce cas un nouveau format devrait remettre tout en ordre ...

si le reformatage echoue, c'est qu'il devait deja y avoir un probleme materiel sur le systeme embarque de la flash ...

Hors ligne

#15 Le 11/01/2016, à 13:26

mamyzero

Re : [RÉSOLU] Carte micro sd non reconnue

Bonjour J5012.
Désolée de ne pas être revenue plutôt.
En fait je viens de réussir !!!!!!! Mais pas par Gparted, mais par "disques" car Gparted se mettait en grisé une fois la partition démontée. Je l'ai donc fait par "disques".
J'ai fait une seule partition en Fat 32.
Et maintenant Gparted l'a reconnaît.
Moi, perso, je n'y comprends rien à rien, mais le principal ..... c'est que ça a fonctionné...... n'est-il pas ????? tongue

Merci à toi  et aussi à Bougron. wink

Hors ligne

Pages : 1