Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 29/12/2015, à 10:35

HORD_Alfa

Problème aux démarrage

Bonjour
Je viens à vous ,car j'ai un problème lors du démarrage de mon pc , https://imagizer.imageshack.us/v2/768xq … 2jTZ57.jpg
Je suis vraiment une brelle en informatique,  je ne comprend rien du tout , est ce que quelqu'un pourrait m'aide SVP
Cordialement un noob

Merci de respecter les règles du forum, la taille des images est limitée.

Dernière modification par HAL (Le 29/12/2015, à 18:24)

Hors ligne

#2 Le 29/12/2015, à 12:52

erresse

Re : Problème aux démarrage

Bonjour,
Qu'est-ce que tu as fait juste avant que la machine refuse de démarrer ?
Apparemment, ce que je vois dans les messages que tu nous affiches, c'est que le système ne parvient pas à se monter sur la racine.
Il est possible que ce soit parce-que l'UUID de ta partition système a changé, mais ma boule de cristal est en panne et ne m'en dit pas plus...


Plus de 50 ans d'informatique, ça en fait des lignes de commandes en console, mais on n'avait pas le choix...
Excellente raison pour, aujourd'hui qu'on le peut, utiliser au maximum les INTERFACES GRAPHIQUES !
Important : Une fois résolu, pensez à clore votre sujet en ajoutant [Résolu] devant le titre du 1er message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Hors ligne

#3 Le 29/12/2015, à 13:07

HORD_Alfa

Re : Problème aux démarrage

Merci de ta réponse , ben hier soir j'ai tout simplement fermé l'écran et débrancher le secteur . Et ce matin en allumant le pc j'ai eu une fenêtre qui c'est ouverte "style démarrage sans probleme" , j'ai cliqué dessus et ca ma ouvert cette écran noir ! sad

Hors ligne

#4 Le 29/12/2015, à 15:49

erresse

Re : Problème aux démarrage

Il y a des erreurs de lecture irrécupérables sur le disque sda. Il se pourrait qu'il ait tout simplement claqué quand tu as fermé (ou remis sous tension) ta machine... Ça peut arriver, la panne matérielle est rare mais toujours possible.
Sinon, pour être à même de tester le disque et d'en explorer (éventuellement) le contenu, il faudrait que tu démarres une "live" session avec un DVD ou une clé USB d'installation pour disposer d'un système opérationnel.


Plus de 50 ans d'informatique, ça en fait des lignes de commandes en console, mais on n'avait pas le choix...
Excellente raison pour, aujourd'hui qu'on le peut, utiliser au maximum les INTERFACES GRAPHIQUES !
Important : Une fois résolu, pensez à clore votre sujet en ajoutant [Résolu] devant le titre du 1er message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Hors ligne

#5 Le 29/12/2015, à 16:40

HORD_Alfa

Re : Problème aux démarrage

Ok j'ai le Cd d'installation Ubuntu 12.04 ! Je vais essayé  Merci
Je te tien au courant wink

Hors ligne

#6 Le 29/12/2015, à 18:05

Bougron

Re : Problème aux démarrage

Bonsoir
Je pense que erresse fatigue un peu

Dans la photo on voit bien une erreur d'entrée sortie sur la seek 306463067
suvi de "failed to read bloc at offset 1835"    dont la conséquence est probablement le message "recovery failled"
et resultat final  "error loading journal"

Je pense aussi qu'il est nécessaire de regarder l'état du disque, C'est pour cela que j'ajoute immédiatement comment utiliser l'outil  après le boot en live-usb qui devrait fonctionner .  Cela fait juste gagner un peu de temps.
A) installation de l'outil par les commandes suivantes

setxkb,qp fr    ##   en frappant comme c'est indiqué cela devrait s'afficher  setxkbmap fr   afin d'avoir un clavier français
sudo add-apt-repository "deb http://archive.ubuntu.com/ubuntu $(lsb_release -sc) universe"
sudo apt-get update
sudo apt-get install --no-install-recommends smartmontools 

B) Demande d'état du disque par la commande.

sudo smartctl   -s on   -a   /dev/sda

Tu postes le résultat pour analyse

Dernière modification par Bougron (Le 29/12/2015, à 18:07)

Hors ligne

#7 Le 09/02/2016, à 13:20

HORD_Alfa

Re : Problème aux démarrage

Bonjours bougron ca va ? Desoler je suis pas venu avant pas eu le temps sad , je voulais savoir comment faire le boot en live USB stp?

Hors ligne

#8 Le 09/02/2016, à 13:24

HORD_Alfa

Re : Problème aux démarrage

Le processus d'installation ce bloque au niveau de l'installation système j'ai les message suivant :
Ata1.00: configured for UDMA/133
Ata1: EH complete
Buffet I/O er for on device sda logical block 2

Hors ligne

#9 Le 09/02/2016, à 14:38

Bougron

Re : Problème aux démarrage

Bonjour.
Il faut que tu bootes avec la clé USB ou le CDROM et que tu choisisses "d'essayer avant d'installer".
Cette action ne va pas se servir du disque dur.
Lorsque le boot est fini, tu entres en mode terminal  par la frappe des caractères Ctrl Alt T
puis tu fais les commandes que j'ai indiqué.
PS. On soupçonnait déjà un problème de qualité disque. L'installation que tu as malgré tout retentée semble le confirmer.

Dernière modification par Bougron (Le 09/02/2016, à 14:40)

Hors ligne

#10 Le 09/02/2016, à 21:19

HORD_Alfa

Re : Problème aux démarrage

Voilà j'ai fait tout ce que tu a dit , après je fait quoi je lance l'installation? Merci pour ton aide

Hors ligne

#11 Le 09/02/2016, à 23:25

Bougron

Re : Problème aux démarrage

J'avais pensé que tu donnerais le résultat de

sudo smartctl   -s on   -a   /dev/sda

afin de confirmer que le disque était à mettre à la poubelle (ou de l'infirmer)

Dernière modification par Bougron (Le 09/02/2016, à 23:26)

Hors ligne

#12 Le 10/02/2016, à 14:10

HORD_Alfa

Re : Problème aux démarrage

Voilà tout ce que cela ma dit avec la manipulation que tu ma demander , merci pour ton aide encore une foisYpVgIE.jpg

zsJBPa.jpg
g6yGCb.jpga7xV7q.jpg

KXIM6Y.jpg

irRPUh.jpg

Dernière modification par HORD_Alfa (Le 10/02/2016, à 14:16)

Hors ligne

#13 Le 10/02/2016, à 15:56

cqfd93

Re : Problème aux démarrage

Bonjour,

Il serait largement préférable de remplacer ces images par le retour en mode texte placé entre balises code (explications ici).


cqfd93

Hors ligne

#14 Le 10/02/2016, à 17:06

HORD_Alfa

Re : Problème aux démarrage

Désoler mais je fait comment ? Mon pc ne marche pas donc j'ai pris les photo avec la tablette ?

Hors ligne

#15 Le 10/02/2016, à 18:25

Bougron

Re : Problème aux démarrage

Bonjour
Je suis incapable d'ouvrir les images. Il semble qu'elles ne soient plus présentes.

Lorsque le retour de la commande est disponible à l'écran,  tu te positionnes en fin de la réponse et remontes jusqu'au début  puis tu fais copier.

après tu te connectes a internet, tu ouvres cette discussion et tu fais un coller   et tu fais la mise en forme indiquée par cqfd93.
Ma connexion internet à 0,1 Mb/s appréciera   et je pourrais aisément indiquer les valeurs qui ne me plaisent pas..

Le résultat ressemblera à cela

b1510@b1510:~$ sudo smartctl -s on -a /dev/sda
Mot de passe [sudo] pour b1510 : 
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.2.0-23-generic] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 2.5" HDD MQ01ABD...
Device Model:     TOSHIBA MQ01ABD100
Serial Number:    339KP439T
LU WWN Device Id: 5 000039 4a2b021d3
Firmware Version: AX003M
User Capacity:    1 000 204 886 016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Feb 10 18:22:45 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  120) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 251) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       1667
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       5041
  5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   083   083   000    Old_age   Always       -       7087
 10 Spin_Retry_Count        0x0033   198   100   030    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       4960
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       73
192 Power-Off_Retract_Count 0x0032   099   099   000    Old_age   Always       -       754
193 Load_Cycle_Count        0x0032   096   096   000    Old_age   Always       -       45846
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       42 (Min/Max 15/53)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       2
220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       0
222 Loaded_Hours            0x0032   087   087   000    Old_age   Always       -       5454
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       272
240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 2
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2 occurred at disk power-on lifetime: 5520 hours (230 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 50 80 da b1 f2 e0   128 sectors at LBA = 0x00f2b1da = 15905242

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 5a b1 f2 e0 00      00:00:08.796  READ DMA EXT
  25 00 00 5a a9 f2 e0 00      00:00:08.788  READ DMA EXT
  25 00 00 5a a1 f2 e0 00      00:00:08.778  READ DMA EXT
  25 00 00 5a 99 f2 e0 00      00:00:08.768  READ DMA EXT
  25 00 00 5a 91 f2 e0 00      00:00:08.758  READ DMA EXT

Error 1 occurred at disk power-on lifetime: 2035 hours (84 days + 19 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 50 b0 d0 c0 0a e0   176 sectors at LBA = 0x000ac0d0 = 704720

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 80 be 0a e0 00      00:00:03.901  READ DMA EXT
  25 00 80 00 be 0a e0 00      00:00:03.820  READ DMA EXT
  ec 00 00 00 00 00 e0 00      00:00:03.671  IDENTIFY DEVICE
  25 00 80 e4 5c 5d e0 00      00:00:03.658  READ DMA EXT
  25 00 40 20 18 5d e0 00      00:00:03.626  READ DMA EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      4540         -
# 2  Extended offline    Aborted by host               90%      4517         -
# 3  Extended offline    Aborted by host               90%      4517         -
# 4  Extended offline    Interrupted (host reset)      90%      4470         -
# 5  Extended offline    Completed without error       00%      4340         -
# 6  Short offline       Completed without error       00%      2533         -
# 7  Short offline       Completed without error       00%         5         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

b1510@b1510:~$ 

Dernière modification par Bougron (Le 10/02/2016, à 18:28)

Hors ligne

#16 Le 10/02/2016, à 20:36

HORD_Alfa

Re : Problème aux démarrage

 ubuntu@ubuntu:~$ sudo smartctl  -s on  -a  /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-23-generic-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Scorpio Blue Serial ATA
Device Model:     WDC WD3200BEVT-22ZCT0
Serial Number:    WD-WXE308AT1377
LU WWN Device Id: 5 0014ee 2014eacb0
Firmware Version: 11.01A11
User Capacity:    320 072 933 376 bytes [320 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Wed Feb 10 12:51:47 2016 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(10800) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 127) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x303f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   196   196   051    Pre-fail  Always       -       36718
  3 Spin_Up_Time            0x0027   188   186   021    Pre-fail  Always       -       1566
  4 Start_Stop_Count        0x0032   095   095   000    Old_age   Always       -       5175
  5 Reallocated_Sector_Ct   0x0033   149   149   140    Pre-fail  Always       -       403
  7 Seek_Error_Rate         0x002e   200   200   051    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   087   087   000    Old_age   Always       -       9916
 10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   096   096   000    Old_age   Always       -       4740
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       221
193 Load_Cycle_Count        0x0032   144   144   000    Old_age   Always       -       169130
194 Temperature_Celsius     0x0022   097   083   000    Old_age   Always       -       50
196 Reallocated_Event_Count 0x0032   174   174   000    Old_age   Always       -       26
197 Current_Pending_Sector  0x0032   200   198   000    Old_age   Always       -       23
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       4
200 Multi_Zone_Error_Rate   0x0009   100   253   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 36483 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 36483 occurred at disk power-on lifetime: 9898 hours (412 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 10 00 00 40  Error: UNC at LBA = 0x00000010 = 16

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 10 00 00 00 08      00:19:29.629  READ FPDMA QUEUED
  ef 10 02 00 00 00 00 08      00:19:29.629  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 00 08      00:19:29.629  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 08      00:19:29.628  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 08      00:19:29.628  SET FEATURES [Set transfer mode]

Error 36482 occurred at disk power-on lifetime: 9898 hours (412 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 10 00 00 40  Error: UNC at LBA = 0x00000010 = 16

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 10 00 00 00 08      00:19:26.414  READ FPDMA QUEUED
  ef 10 02 00 00 00 00 08      00:19:26.413  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 00 08      00:19:26.413  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 08      00:19:26.413  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 08      00:19:26.413  SET FEATURES [Set transfer mode]

Error 36481 occurred at disk power-on lifetime: 9898 hours (412 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 10 00 00 40  Error: UNC at LBA = 0x00000010 = 16

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 10 00 00 00 08      00:19:23.209  READ FPDMA QUEUED
  ef 10 02 00 00 00 00 08      00:19:23.209  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 00 08      00:19:23.209  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 08      00:19:23.208  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 08      00:19:23.208  SET FEATURES [Set transfer mode]

Error 36480 occurred at disk power-on lifetime: 9898 hours (412 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 10 00 00 40  Error: UNC at LBA = 0x00000010 = 16

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 10 00 00 00 08      00:19:20.149  READ FPDMA QUEUED
  ef 10 02 00 00 00 00 08      00:19:20.149  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 00 08      00:19:20.149  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 08      00:19:20.148  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 08      00:19:20.148  SET FEATURES [Set transfer mode]

Error 36479 occurred at disk power-on lifetime: 9898 hours (412 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 10 00 00 40  Error: UNC at LBA = 0x00000010 = 16

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 10 00 00 00 08      00:19:17.088  READ FPDMA QUEUED
  ef 90 03 00 00 00 00 08      00:19:17.073  SET FEATURES [Reserved for Serial ATA]
  ef 10 02 00 00 00 00 08      00:19:17.073  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 00 08      00:19:17.073  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 08      00:19:17.073  IDENTIFY DEVICE

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

ubuntu@ubuntu:~$ 

Hors ligne

#17 Le 10/02/2016, à 21:40

Bougron

Re : Problème aux démarrage

Bonsoir.
Vu les anomalies que tu signalais, vu la taille du disque (320Go), je pense que tu vas devoir le remplacer car il n'est pas en bon état

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   196   196   051    Pre-fail  Always       -       36718
  5 Reallocated_Sector_Ct   0x0033   149   149   140    Pre-fail  Always       -       403
196 Reallocated_Event_Count 0x0032   174   174   000    Old_age   Always       -       26
197 Current_Pending_Sector  0x0032   200   198   000    Old_age   Always       -       23

Ces valeurs sont loin d'être excessives.
mais celle qui suit est trop importante.
Error 36483 occurred at disk power-on lifetime: 9898 hours (412 days + 10 hours)

Hors ligne

#18 Le 10/02/2016, à 21:57

HORD_Alfa

Re : Problème aux démarrage

Donc si je comprend bien, j'ai juste a changer mon disque dur ? Et tout remarchera niquel? Un grand merci pour vos réponses a tous , bonne continuation

Hors ligne

#19 Le 10/02/2016, à 22:24

Bougron

Re : Problème aux démarrage

Tu devras aussi réinstaller le logiciel.    Voir sauver tes données personnelles avant le démontage.

Hors ligne