#1 Le 20/01/2016, à 19:15
- barbamaman
Carte PCI Silverstone ECU01 non reconnue ?
Bonsoir,
voici tout d'abord ma config matérielle :
- carte mère msi z97 pc mate
- carte pci silverstone ecu01 : http://www.silverstonetek.com/product.php?pid=498
Mon soucis : elle ne semble pas être reconnue sous ubuntu 15.10, car mon lecteur de cartes ou les usb3 de mon boitier ne fonctionnent pas quand je les branche dessus ...
Que puis-je essayer ?
Le site parle de "xhci" : "User should be checked whether the Linux has included XHCI function." -> je dois faire une manip spéciale ?
Hors ligne
#2 Le 20/01/2016, à 20:26
- moko138
Re : Carte PCI Silverstone ECU01 non reconnue ?
Le site parle de "xhci" : "User should be checked whether the Linux has included XHCI function." -> je dois faire une manip spéciale ?
xhci est tout bêtement le module de l'usb3 dans linux, donc de ce côté-là, ça roule.
Expansion Cards ECU01
■ Includes two USB 3.0 internal 19pin connectors
■ PCIe Gen2.0 x2 throughput 10Gbps
■ Supports Low profile chassis
■ Supports UASP and Turbo Boost
The SilverStone ECU01 is the world’s first PCI-E Gen 2.0 x2 expansion card with two internal 19pin USB3.0 connectors. With its 10Gbps bandwidth, it offers more stable and faster transfer rate when multiple external USB devices are in use simultaneously. The ECU01 supports UASP (USB Attached SCSI Protocol), which enables enhanced performance. Even for users who can’t benefit from UASP, an included “Turbo Boost” driver can offer similar enhanced performance to make ECU01 the best choice for anyone looking to expand and maximize their USB 3.0 devices
ce qui ne m'éclaire pas.
En revanche, ton dmesg doit contenir des infos pertinentes, tu devrais le coller ici.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#3 Le 21/01/2016, à 16:01
- barbamaman
Re : Carte PCI Silverstone ECU01 non reconnue ?
re,
voici le résultat de la commande :
ubuntu@ubuntu:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.0-16-generic (buildd@lcy01-07) (gcc version 5.2.1 20151003 (Ubuntu 5.2.1-21ubuntu2) ) #19-Ubuntu SMP Thu Oct 8 15:35:06 UTC 2015 (Ubuntu 4.2.0-16.19-generic 4.2.3)
[ 0.000000] Command line: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash --- BOOT_IMAGE=/casper/vmlinuz.efi
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c8351fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c8352000-0x00000000c8358fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c8359000-0x00000000c87a5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c87a6000-0x00000000c8db6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c8db7000-0x00000000d960cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d960d000-0x00000000d9677fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9678000-0x00000000d96c3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d96c4000-0x00000000d97fcfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d97fd000-0x00000000d9ffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: MSI MS-7850/Z97 PC Mate(MS-7850), BIOS V4.7 12/23/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00DC000000 mask 7FFC000000 uncachable
[ 0.000000] 4 base 00DB000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 021FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB
[ 0.000000] reg 1, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 3, base: 3520MB, range: 64MB, type UC
[ 0.000000] reg 4, base: 3504MB, range: 16MB, type UC
[ 0.000000] reg 5, base: 8702MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 8110M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 8 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 512MB, type WB
[ 0.000000] reg 3, base: 3504MB, range: 16MB, type UC
[ 0.000000] reg 4, base: 3520MB, range: 64MB, type UC
[ 0.000000] reg 5, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 6, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 7, base: 8702MB, range: 2MB, type UC
[ 0.000000] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xda000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf] mapped at [ffff8800000fd7b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01ff0000, 0x01ff0fff] PGTABLE
[ 0.000000] BRK [0x01ff1000, 0x01ff1fff] PGTABLE
[ 0.000000] BRK [0x01ff2000, 0x01ff2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21fc00000-0x21fdfffff]
[ 0.000000] [mem 0x21fc00000-0x21fdfffff] page 2M
[ 0.000000] BRK [0x01ff3000, 0x01ff3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fbfffff]
[ 0.000000] [mem 0x200000000-0x21fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1e0000000-0x1ffffffff]
[ 0.000000] [mem 0x1e0000000-0x1ffffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc8351fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xc81fffff] page 2M
[ 0.000000] [mem 0xc8200000-0xc8351fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc8359000-0xc87a5fff]
[ 0.000000] [mem 0xc8359000-0xc83fffff] page 4k
[ 0.000000] [mem 0xc8400000-0xc85fffff] page 2M
[ 0.000000] [mem 0xc8600000-0xc87a5fff] page 4k
[ 0.000000] BRK [0x01ff4000, 0x01ff4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xc8db7000-0xd960cfff]
[ 0.000000] [mem 0xc8db7000-0xc8dfffff] page 4k
[ 0.000000] [mem 0xc8e00000-0xd95fffff] page 2M
[ 0.000000] [mem 0xd9600000-0xd960cfff] page 4k
[ 0.000000] BRK [0x01ff5000, 0x01ff5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xd9678000-0xd96c3fff]
[ 0.000000] [mem 0xd9678000-0xd96c3fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd9fff000-0xd9ffffff]
[ 0.000000] [mem 0xd9fff000-0xd9ffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1dfffffff]
[ 0.000000] [mem 0x100000000-0x1dfffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x7e894000-0x7fffefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000D97C8088 000094 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000D97D94B0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000D97C81B8 0112F5 (v02 ALASKA A M I 00000015 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000D97FCF80 000040
[ 0.000000] ACPI: APIC 0x00000000D97D95C0 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000D97D9638 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000D97D9680 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: ASF! 0x00000000D97D9720 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000D97D97C8 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000D97DA448 000539 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000D97DA988 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000D97DB500 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000D97DB540 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D97DB578 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000D97DB8E8 005B5D (v02 SaSsdt SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: UEFI 0x00000000D97E1448 000042 (v01 ALASKA A M I 01072009 00000000)
[ 0.000000] ACPI: SSDT 0x00000000D97E1490 0005AC (v02 Intel_ IsctTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21fdf7000-0x21fdfbfff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217400000-ffff88021f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c8351fff]
[ 0.000000] node 0: [mem 0x00000000c8359000-0x00000000c87a5fff]
[ 0.000000] node 0: [mem 0x00000000c8db7000-0x00000000d960cfff]
[ 0.000000] node 0: [mem 0x00000000d9678000-0x00000000d96c3fff]
[ 0.000000] node 0: [mem 0x00000000d9fff000-0x00000000d9ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
[ 0.000000] On node 0 totalpages: 2067934
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13826 pages used for memmap
[ 0.000000] DMA32 zone: 884802 pages, LIFO batch:31
[ 0.000000] Normal zone: 18424 pages used for memmap
[ 0.000000] Normal zone: 1179136 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdb200000-0xdf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc8352000-0xc8358fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc87a6000-0xc8db6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd960d000-0xd9677fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd96c4000-0xd97fcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd97fd000-0xd9ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88021fa00000 s96728 r8192 d30248 u524288
[ 0.000000] pcpu-alloc: s96728 r8192 d30248 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2035599
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash --- BOOT_IMAGE=/casper/vmlinuz.efi
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8033388K/8271736K available (8146K kernel code, 1237K rwdata, 3800K rodata, 1460K init, 1292K bss, 238348K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16640 nr_irqs:456 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3600.024 MHz processor
[ 0.000019] Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.04 BogoMIPS (lpj=14400096)
[ 0.000021] pid_max: default: 32768 minimum: 301
[ 0.000024] ACPI: Core revision 20150619
[ 0.010868] ACPI: All ACPI Tables successfully acquired
[ 0.010880] Security Framework initialized
[ 0.010887] AppArmor: AppArmor initialized
[ 0.010888] Yama: becoming mindful.
[ 0.011229] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.012216] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012642] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012648] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012790] Initializing cgroup subsys blkio
[ 0.012792] Initializing cgroup subsys memory
[ 0.012797] Initializing cgroup subsys devices
[ 0.012798] Initializing cgroup subsys freezer
[ 0.012800] Initializing cgroup subsys net_cls
[ 0.012801] Initializing cgroup subsys perf_event
[ 0.012803] Initializing cgroup subsys net_prio
[ 0.012804] Initializing cgroup subsys hugetlb
[ 0.012820] CPU: Physical Processor ID: 0
[ 0.012820] CPU: Processor Core ID: 0
[ 0.013531] mce: CPU supports 7 MCE banks
[ 0.013538] CPU0: Thermal monitoring enabled (TM1)
[ 0.013543] process: using mwait in idle threads
[ 0.013546] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.013546] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.013625] Freeing SMP alternatives memory: 28K (ffffffff81ea4000 - ffffffff81eab000)
[ 0.024802] ftrace: allocating 30905 entries in 121 pages
[ 0.033537] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.073160] TSC deadline timer enabled
[ 0.073163] smpboot: CPU0: Intel(R) Core(TM) i3-4160 CPU @ 3.60GHz (fam: 06, model: 3c, stepping: 03)
[ 0.073179] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.073193] ... version: 3
[ 0.073194] ... bit width: 48
[ 0.073194] ... generic registers: 4
[ 0.073195] ... value mask: 0000ffffffffffff
[ 0.073195] ... max period: 0000ffffffffffff
[ 0.073196] ... fixed-purpose events: 3
[ 0.073196] ... event mask: 000000070000000f
[ 0.073709] x86: Booting SMP configuration:
[ 0.073710] .... node #0, CPUs: #1
[ 0.077561] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.077613] #2 #3
[ 0.085486] x86: Booted up 1 node, 4 CPUs
[ 0.085488] smpboot: Total of 4 processors activated (28800.19 BogoMIPS)
[ 0.087972] devtmpfs: initialized
[ 0.089388] evm: security.selinux
[ 0.089389] evm: security.SMACK64
[ 0.089389] evm: security.SMACK64EXEC
[ 0.089390] evm: security.SMACK64TRANSMUTE
[ 0.089390] evm: security.SMACK64MMAP
[ 0.089391] evm: security.ima
[ 0.089391] evm: security.capability
[ 0.089431] PM: Registering ACPI NVS region [mem 0xc8352000-0xc8358fff] (28672 bytes)
[ 0.089432] PM: Registering ACPI NVS region [mem 0xd96c4000-0xd97fcfff] (1282048 bytes)
[ 0.089487] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.089536] pinctrl core: initialized pinctrl subsystem
[ 0.089609] RTC time: 13:51:13, date: 01/21/16
[ 0.089680] NET: Registered protocol family 16
[ 0.091864] cpuidle: using governor ladder
[ 0.095857] cpuidle: using governor menu
[ 0.095905] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.095906] ACPI: bus type PCI registered
[ 0.095907] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.095947] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.095948] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.095954] PCI: Using configuration type 1 for base access
[ 0.096101] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.100046] ACPI: Added _OSI(Module Device)
[ 0.100047] ACPI: Added _OSI(Processor Device)
[ 0.100048] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.100048] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.102895] ACPI: Executed 6 blocks of module-level executable AML code
[ 0.104794] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.105320] ACPI: Dynamic OEM Table Load:
[ 0.105324] ACPI: SSDT 0xFFFF880215D2A000 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.105785] ACPI: Dynamic OEM Table Load:
[ 0.105789] ACPI: SSDT 0xFFFF880215CF2000 0005AA (v02 PmRef ApIst 00003000 INTL 20051117)
[ 0.106280] ACPI: Dynamic OEM Table Load:
[ 0.106282] ACPI: SSDT 0xFFFF880215D27A00 000119 (v02 PmRef ApCst 00003000 INTL 20051117)
[ 0.107051] ACPI: Interpreter enabled
[ 0.107057] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[ 0.107061] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[ 0.107076] ACPI: (supports S0 S3 S4 S5)
[ 0.107077] ACPI: Using IOAPIC for interrupt routing
[ 0.107096] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.107395] ACPI: Power Resource [PG00] (on)
[ 0.107579] ACPI: Power Resource [PG01] (on)
[ 0.107758] ACPI: Power Resource [PG02] (on)
[ 0.112717] ACPI: Power Resource [FN00] (off)
[ 0.112761] ACPI: Power Resource [FN01] (off)
[ 0.112803] ACPI: Power Resource [FN02] (off)
[ 0.112845] ACPI: Power Resource [FN03] (off)
[ 0.112888] ACPI: Power Resource [FN04] (off)
[ 0.113404] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.113407] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.113540] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.113615] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.113616] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.113868] PCI host bridge to bus 0000:00
[ 0.113870] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.113871] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.113872] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.113873] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.113874] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.113875] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.113876] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.113877] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.113878] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.113879] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.113880] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.113884] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.113939] pci 0000:00:02.0: [8086:041e] type 00 class 0x030000
[ 0.113948] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.113952] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.113955] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.114000] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.114008] pci 0000:00:03.0: reg 0x10: [mem 0xf7d14000-0xf7d17fff 64bit]
[ 0.114073] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[ 0.114094] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[ 0.114133] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.114162] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.114188] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[ 0.114210] pci 0000:00:16.0: reg 0x10: [mem 0xf7d1d000-0xf7d1d00f 64bit]
[ 0.114252] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.114313] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[ 0.114337] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d1b000-0xf7d1b3ff]
[ 0.114394] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.114424] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.114449] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[ 0.114469] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit]
[ 0.114514] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.114548] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.114571] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[ 0.114620] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.114662] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.114688] pci 0000:00:1c.5: [8086:8c9a] type 01 class 0x060400
[ 0.114736] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.114777] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.114799] pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
[ 0.114848] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.114887] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.114912] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[ 0.114935] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d1a000-0xf7d1a3ff]
[ 0.114992] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.115022] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.115048] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[ 0.115171] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[ 0.115188] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.115194] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.115200] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.115206] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.115211] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.115217] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d19000-0xf7d197ff]
[ 0.115237] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.115278] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[ 0.115291] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d18000-0xf7d180ff 64bit]
[ 0.115307] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.115404] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.115468] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.115504] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.115530] pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
[ 0.115545] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.115599] pci 0000:02:00.0: supports D1 D2
[ 0.115600] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.115632] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.119838] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.119841] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.119843] pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.119848] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.119912] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060400
[ 0.120019] pci 0000:03:00.0: supports D1 D2
[ 0.120020] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.120050] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.127823] pci 0000:00:1c.6: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.127831] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.127832] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.127833] pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.127833] pci 0000:00:1c.6: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.127834] pci 0000:00:1c.6: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.127835] pci 0000:00:1c.6: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.127836] pci 0000:00:1c.6: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.127837] pci 0000:00:1c.6: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.127838] pci 0000:00:1c.6: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.127839] pci 0000:00:1c.6: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.127944] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.128461] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.128493] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.128522] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.128551] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.128579] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.128608] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.128637] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.128665] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.128849] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.128913] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.128915] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.128916] vgaarb: loaded
[ 0.128917] vgaarb: bridge control possible 0000:00:02.0
[ 0.129067] SCSI subsystem initialized
[ 0.129093] libata version 3.00 loaded.
[ 0.129107] ACPI: bus type USB registered
[ 0.129117] usbcore: registered new interface driver usbfs
[ 0.129122] usbcore: registered new interface driver hub
[ 0.129131] usbcore: registered new device driver usb
[ 0.129217] PCI: Using ACPI for IRQ routing
[ 0.130372] PCI: pci_cache_line_size set to 64 bytes
[ 0.130406] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.130407] e820: reserve RAM buffer [mem 0xc8352000-0xcbffffff]
[ 0.130407] e820: reserve RAM buffer [mem 0xc87a6000-0xcbffffff]
[ 0.130408] e820: reserve RAM buffer [mem 0xd960d000-0xdbffffff]
[ 0.130409] e820: reserve RAM buffer [mem 0xd96c4000-0xdbffffff]
[ 0.130410] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
[ 0.130410] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[ 0.130475] NetLabel: Initializing
[ 0.130475] NetLabel: domain hash size = 128
[ 0.130476] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.130484] NetLabel: unlabeled traffic allowed by default
[ 0.130532] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.130535] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.132551] clocksource: Switched to clocksource hpet
[ 0.136108] AppArmor: AppArmor Filesystem Enabled
[ 0.136154] pnp: PnP ACPI init
[ 0.136241] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.136244] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.136317] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.136319] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.136333] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.136354] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.136356] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.136422] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.136423] system 00:04: [io 0x0a10-0x0a1f] has been reserved
[ 0.136424] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.136513] pnp 00:05: [dma 0 disabled]
[ 0.136553] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.136700] pnp 00:06: [dma 0 disabled]
[ 0.136756] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.136786] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.136787] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.137022] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.137023] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.137024] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.137025] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.137027] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.137028] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.137029] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.137030] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.137031] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.137033] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.137034] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.137035] system 00:08: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 0.137037] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.137155] pnp: PnP ACPI: found 9 devices
[ 0.142830] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.142862] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.142870] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.142873] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.142876] pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.142879] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.142884] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.142899] pci 0000:00:1c.6: PCI bridge to [bus 03-04]
[ 0.142908] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.142909] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.142910] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.142911] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.142911] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.142912] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.142913] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.142914] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.142915] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.142916] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.142917] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.142918] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.142919] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.142920] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.142921] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.142922] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.142922] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.142923] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.142924] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.142925] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.142926] pci_bus 0000:03: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.142927] pci_bus 0000:03: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.142928] pci_bus 0000:03: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.142948] NET: Registered protocol family 2
[ 0.143052] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.143141] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.143241] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.143258] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.143277] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.143313] NET: Registered protocol family 1
[ 0.143322] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.143605] PCI: CLS 64 bytes, default 64
[ 0.143641] Trying to unpack rootfs image as initramfs...
[ 3.161246] Freeing initrd memory: 23980K (ffff88007e894000 - ffff88007ffff000)
[ 3.161261] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.161262] software IO TLB [mem 0xd560d000-0xd960d000] (64MB) mapped at [ffff8800d560d000-ffff8800d960cfff]
[ 3.161313] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 3.161314] hw unit of domain pp0-core 2^-14 Joules
[ 3.161315] hw unit of domain package 2^-14 Joules
[ 3.161315] hw unit of domain dram 2^-14 Joules
[ 3.161316] hw unit of domain pp1-gpu 2^-14 Joules
[ 3.161393] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1c
[ 3.161396] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1c
[ 3.161400] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1c
[ 3.161405] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1c
[ 3.161434] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.161483] Scanning for low memory corruption every 60 seconds
[ 3.161665] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 3.161677] Initialise system trusted keyring
[ 3.161692] audit: initializing netlink subsys (disabled)
[ 3.161704] audit: type=2000 audit(1453384276.152:1): initialized
[ 3.161916] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 3.161917] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.162725] zpool: loaded
[ 3.162727] zbud: loaded
[ 3.162838] VFS: Disk quotas dquot_6.6.0
[ 3.162856] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.163128] fuse init (API version 7.23)
[ 3.163207] Key type big_key registered
[ 3.163447] Key type asymmetric registered
[ 3.163450] Asymmetric key parser 'x509' registered
[ 3.163458] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 3.163483] io scheduler noop registered
[ 3.163485] io scheduler deadline registered (default)
[ 3.163507] io scheduler cfq registered
[ 3.163727] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.163731] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.163753] intel_idle: MWAIT substates: 0x42120
[ 3.163754] intel_idle: v0.4 model 0x3C
[ 3.163755] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.163905] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 3.163907] ACPI: Power Button [PWRB]
[ 3.163927] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 3.163928] ACPI: Sleep Button [SLPB]
[ 3.163947] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.163948] ACPI: Power Button [PWRF]
[ 3.164395] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.164396] ACPI: Thermal Zone [TZ00] (28 C)
[ 3.164509] thermal LNXTHERM:01: registered as thermal_zone1
[ 3.164510] ACPI: Thermal Zone [TZ01] (30 C)
[ 3.164535] GHES: HEST is not enabled!
[ 3.164588] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 3.184910] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.185825] Linux agpgart interface v0.103
[ 3.186919] brd: module loaded
[ 3.187410] loop: module loaded
[ 3.187535] libphy: Fixed MDIO Bus: probed
[ 3.187536] tun: Universal TUN/TAP device driver, 1.6
[ 3.187537] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.187561] PPP generic driver version 2.4.2
[ 3.187656] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.187659] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 3.187729] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 3.187733] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 3.187800] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.187801] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.187802] usb usb1: Product: xHCI Host Controller
[ 3.187803] usb usb1: Manufacturer: Linux 4.2.0-16-generic xhci-hcd
[ 3.187804] usb usb1: SerialNumber: 0000:00:14.0
[ 3.187871] hub 1-0:1.0: USB hub found
[ 3.187885] hub 1-0:1.0: 14 ports detected
[ 3.190714] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.190716] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 3.190738] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.190739] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.190740] usb usb2: Product: xHCI Host Controller
[ 3.190741] usb usb2: Manufacturer: Linux 4.2.0-16-generic xhci-hcd
[ 3.190742] usb usb2: SerialNumber: 0000:00:14.0
[ 3.190798] hub 2-0:1.0: USB hub found
[ 3.190808] hub 2-0:1.0: 6 ports detected
[ 3.192005] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.192008] ehci-pci: EHCI PCI platform driver
[ 3.192064] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 3.192066] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.192075] ehci-pci 0000:00:1a.0: debug port 2
[ 3.195973] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 3.195979] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d1b000
[ 3.207741] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.207763] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.207764] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.207765] usb usb3: Product: EHCI Host Controller
[ 3.207766] usb usb3: Manufacturer: Linux 4.2.0-16-generic ehci_hcd
[ 3.207767] usb usb3: SerialNumber: 0000:00:1a.0
[ 3.207908] hub 3-0:1.0: USB hub found
[ 3.207911] hub 3-0:1.0: 2 ports detected
[ 3.208035] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 3.208038] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 3.208046] ehci-pci 0000:00:1d.0: debug port 2
[ 3.211939] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 3.211946] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1a000
[ 3.223748] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.223773] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.223775] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.223775] usb usb4: Product: EHCI Host Controller
[ 3.223776] usb usb4: Manufacturer: Linux 4.2.0-16-generic ehci_hcd
[ 3.223777] usb usb4: SerialNumber: 0000:00:1d.0
[ 3.223919] hub 4-0:1.0: USB hub found
[ 3.223922] hub 4-0:1.0: 2 ports detected
[ 3.223992] ehci-platform: EHCI generic platform driver
[ 3.223998] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.224001] ohci-pci: OHCI PCI platform driver
[ 3.224006] ohci-platform: OHCI generic platform driver
[ 3.224011] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.224038] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.226288] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.226291] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.226510] mousedev: PS/2 mouse device common for all mice
[ 3.226818] rtc_cmos 00:02: RTC can wake from S4
[ 3.226929] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 3.226951] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.226956] i2c /dev entries driver
[ 3.227000] device-mapper: uevent: version 1.0.3
[ 3.227038] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[ 3.227048] Intel P-state driver initializing.
[ 3.227149] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.227435] PCCT header not found.
[ 3.227951] NET: Registered protocol family 10
[ 3.228365] NET: Registered protocol family 17
[ 3.228404] Key type dns_resolver registered
[ 3.229205] Loading compiled-in X.509 certificates
[ 3.231457] Loaded X.509 cert 'Build time autogenerated kernel key: 6a1c9c21f04ab86fd1d7ced6ca113540fc8e35b6'
[ 3.231492] registered taskstats version 1
[ 3.231543] zswap: loading zswap
[ 3.231548] zswap: using zbud pool
[ 3.231558] zswap: using lzo compressor
[ 3.232753] Key type trusted registered
[ 3.234557] Key type encrypted registered
[ 3.234562] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.234565] ima: No TPM chip found, activating TPM-bypass!
[ 3.234579] evm: HMAC attrs: 0x1
[ 3.234886] Magic number: 0:265:888
[ 3.234976] rtc_cmos 00:02: setting system clock to 2016-01-21 13:51:16 UTC (1453384276)
[ 3.235022] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.235023] EDD information not available.
[ 3.235071] PM: Hibernation image not present or could not be loaded.
[ 3.235270] Freeing unused kernel memory: 1460K (ffffffff81d37000 - ffffffff81ea4000)
[ 3.235271] Write protecting the kernel read-only data: 12288k
[ 3.235358] Freeing unused kernel memory: 36K (ffff8800017f7000 - ffff880001800000)
[ 3.235412] Freeing unused kernel memory: 296K (ffff880001bb6000 - ffff880001c00000)
[ 3.241817] random: systemd-udevd urandom read with 3 bits of entropy available
[ 3.259643] wmi: Mapper loaded
[ 3.270421] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.270429] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.271777] [drm] Initialized drm 1.1.0 20060810
[ 3.276534] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000c7a000, d8:cb:8a:56:f7:51, XID 0c000800 IRQ 25
[ 3.276537] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.276744] ahci 0000:00:1f.2: version 3.0
[ 3.276889] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 3.276891] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 3.285035] scsi host0: ahci
[ 3.285127] scsi host1: ahci
[ 3.285200] scsi host2: ahci
[ 3.285270] scsi host3: ahci
[ 3.285340] scsi host4: ahci
[ 3.285407] scsi host5: ahci
[ 3.285449] ata1: SATA max UDMA/133 abar m2048@0xf7d19000 port 0xf7d19100 irq 26
[ 3.285451] ata2: SATA max UDMA/133 abar m2048@0xf7d19000 port 0xf7d19180 irq 26
[ 3.285453] ata3: DUMMY
[ 3.285454] ata4: DUMMY
[ 3.285455] ata5: DUMMY
[ 3.285455] ata6: DUMMY
[ 3.287952] [drm] Memory usable by graphics device = 2048M
[ 3.287955] [drm] Replacing VGA console driver
[ 3.288549] Console: switching to colour dummy device 80x25
[ 3.291838] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 3.295092] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.295093] [drm] Driver supports precise vblank timestamp query.
[ 3.295149] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.371952] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.372283] acpi device:16: registered as cooling_device9
[ 3.372334] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 3.372413] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
[ 3.409241] fbcon: inteldrmfb (fb0) is primary device
[ 3.479745] Console: switching to colour frame buffer device 240x67
[ 3.482426] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.482427] i915 0000:00:02.0: registered panic notifier
[ 3.499314] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 3.519289] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 3.535260] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 3.603163] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.603179] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.604006] ata1.00: ATA-9: SanDisk SDSSDHII120G, X31200RL, max UDMA/133
[ 3.604008] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 3.604053] ata2.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133
[ 3.604054] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.604968] ata2.00: configured for UDMA/133
[ 3.605621] ata1.00: configured for UDMA/133
[ 3.605749] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDHII 00RL PQ: 0 ANSI: 5
[ 3.605986] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 3.606006] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.606011] sd 0:0:0:0: [sda] Write Protect is off
[ 3.606014] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.606023] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.606087] scsi 1:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
[ 3.606196] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.606198] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 3.606214] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3.606230] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.606232] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.606246] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.606425] sda: sda1 sda2
[ 3.606543] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.631440] usb 1-1: New USB device found, idVendor=13fe, idProduct=3600
[ 3.631442] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.631443] usb 1-1: Product: USB DISK 2.0
[ 3.631444] usb 1-1: Manufacturer:
[ 3.631445] usb 1-1: SerialNumber: 07A20113E1B44F14
[ 3.633387] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 3.633443] usb-storage 1-1:1.0: Quirks match for vid 13fe pid 3600: 4000
[ 3.633467] scsi host6: usb-storage 1-1:1.0
[ 3.633506] usbcore: registered new interface driver usb-storage
[ 3.634258] usbcore: registered new interface driver uas
[ 3.651117] sdb: sdb1
[ 3.651329] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.651434] usb 3-1: New USB device found, idVendor=8087, idProduct=8009
[ 3.651437] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.653078] hub 3-1:1.0: USB hub found
[ 3.653183] hub 3-1:1.0: 6 ports detected
[ 3.667421] usb 4-1: New USB device found, idVendor=8087, idProduct=8001
[ 3.667423] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.667567] hub 4-1:1.0: USB hub found
[ 3.667657] hub 4-1:1.0: 8 ports detected
[ 3.742924] usb 1-5: new low-speed USB device number 3 using xhci_hcd
[ 3.870137] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.880390] usb 1-5: New USB device found, idVendor=1c4f, idProduct=0002
[ 3.880392] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.880393] usb 1-5: Product: USB Keykoard
[ 3.880394] usb 1-5: Manufacturer: USB
[ 3.880527] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3.880530] usb 1-5: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3.882837] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.887839] usbcore: registered new interface driver usbhid
[ 3.887841] usbhid: USB HID core driver
[ 3.889267] input: USB USB Keykoard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:1C4F:0002.0001/input/input7
[ 3.942730] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:14.0-5/input0
[ 3.942836] input: USB USB Keykoard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:1C4F:0002.0002/input/input8
[ 3.969819] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.994541] usb 1-6: new low-speed USB device number 4 using xhci_hcd
[ 3.998693] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:14.0-5/input1
[ 4.127197] usb 1-6: New USB device found, idVendor=1267, idProduct=0210
[ 4.127199] usb 1-6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 4.127200] usb 1-6: Product: PS/2+USB Mouse
[ 4.127335] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4.130917] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:1267:0210.0003/input/input9
[ 4.131054] hid-generic 0003:1267:0210.0003: input,hidraw2: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:14.0-6/input0
[ 4.158287] tsc: Refined TSC clocksource calibration: 3599.996 MHz
[ 4.158290] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e44fb235b, max_idle_ns: 440795341910 ns
[ 4.354212] usb 2-6: new SuperSpeed USB device number 2 using xhci_hcd
[ 4.372652] usb 2-6: New USB device found, idVendor=05e3, idProduct=0732
[ 4.372654] usb 2-6: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[ 4.372655] usb 2-6: Product: USB Reader
[ 4.372655] usb 2-6: Manufacturer: Genesys
[ 4.372656] usb 2-6: SerialNumber: 000000000696
[ 4.375161] usb-storage 2-6:1.0: USB Mass Storage device detected
[ 4.375305] scsi host7: usb-storage 2-6:1.0
[ 4.630614] scsi 6:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 4.630817] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 4.631426] sd 6:0:0:0: [sdc] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 4.631574] sd 6:0:0:0: [sdc] Write Protect is off
[ 4.631577] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 4.631705] sd 6:0:0:0: [sdc] No Caching mode page found
[ 4.631708] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 4.634339] sdc: sdc1
[ 4.635470] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 5.156747] clocksource: Switched to clocksource tsc
[ 5.240783] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 5.373339] scsi 7:0:0:0: Direct-Access Generic STORAGE DEVICE 0551 PQ: 0 ANSI: 5
[ 5.373669] scsi 7:0:0:1: Direct-Access Generic STORAGE DEVICE 0551 PQ: 0 ANSI: 5
[ 5.373996] scsi 7:0:0:2: Direct-Access Generic STORAGE DEVICE 0551 PQ: 0 ANSI: 5
[ 5.374324] scsi 7:0:0:3: Direct-Access Generic STORAGE DEVICE 0551 PQ: 0 ANSI: 5
[ 5.374652] scsi 7:0:0:4: Direct-Access Generic STORAGE DEVICE 0551 PQ: 0 ANSI: 5
[ 5.374875] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 5.374994] sd 7:0:0:1: Attached scsi generic sg4 type 0
[ 5.375104] sd 7:0:0:2: Attached scsi generic sg5 type 0
[ 5.375221] sd 7:0:0:3: Attached scsi generic sg6 type 0
[ 5.375330] sd 7:0:0:4: Attached scsi generic sg7 type 0
[ 5.404376] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[ 5.406466] sd 7:0:0:1: [sde] Attached SCSI removable disk
[ 5.406881] sd 7:0:0:2: [sdf] Attached SCSI removable disk
[ 5.407297] sd 7:0:0:3: [sdg] Attached SCSI removable disk
[ 5.407737] sd 7:0:0:4: [sdh] Attached SCSI removable disk
[ 5.470708] random: nonblocking pool is initialized
[ 10.457714] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[ 10.460947] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 10.461028] systemd[1]: Detected architecture x86-64.
[ 10.461152] systemd[1]: Set hostname to <ubuntu>.
[ 10.461255] systemd[1]: Initializing machine ID from random generator.
[ 10.538709] systemd[1]: [/lib/systemd/system/casper.service:10] Failed to parse input specifier, ignoring: force-tty
[ 10.539212] systemd[1]: rofs.mount: Unit is bound to inactive unit dev-loop0.device. Stopping, too.
[ 10.540000] systemd[1]: Created slice Root Slice.
[ 10.540041] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 10.540092] systemd[1]: Created slice System Slice.
[ 10.540110] systemd[1]: Listening on LVM2 poll daemon socket.
[ 10.540128] systemd[1]: Listening on Journal Socket (/dev/log).
[ 10.540199] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 10.540485] systemd[1]: Starting Increase datagram queue length...
[ 10.540516] systemd[1]: Listening on Journal Socket.
[ 10.540842] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 10.541310] systemd[1]: Mounting Debug File System...
[ 10.542248] systemd[1]: Mounting Huge Pages File System...
[ 10.542784] systemd[1]: Started Braille Device Support.
[ 10.543343] systemd[1]: Starting Uncomplicated firewall...
[ 10.543364] systemd[1]: Reached target Encrypted Volumes.
[ 10.543412] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 10.543744] systemd[1]: Mounting POSIX Message Queue File System...
[ 10.544573] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 10.544601] systemd[1]: Reached target User and Group Name Lookups.
[ 10.544691] systemd[1]: Listening on Journal Audit Socket.
[ 10.545545] systemd[1]: Started Read required files in advance.
[ 10.546210] systemd[1]: Starting Setup Virtual Console...
[ 10.546269] systemd[1]: Listening on udev Kernel Socket.
[ 10.546396] systemd[1]: Created slice system-getty.slice.
[ 10.546412] systemd[1]: Reached target Remote File Systems (Pre).
[ 10.546454] systemd[1]: Listening on udev Control Socket.
[ 10.546846] systemd[1]: Starting udev Coldplug all Devices...
[ 10.546906] systemd[1]: Created slice User and Session Slice.
[ 10.546917] systemd[1]: Reached target Slices.
[ 10.546948] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 10.547311] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 10.547351] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 10.548850] systemd[1]: Starting Load Kernel Modules...
[ 10.549874] systemd[1]: Started Increase datagram queue length.
[ 10.549980] systemd[1]: Listening on Syslog Socket.
[ 10.550264] systemd[1]: Starting Journal Service...
[ 10.558630] systemd[1]: Mounted Debug File System.
[ 10.558700] systemd[1]: Mounted POSIX Message Queue File System.
[ 10.558742] systemd[1]: Mounted Huge Pages File System.
[ 10.559708] systemd[1]: Started Remount Root and Kernel File Systems.
[ 10.560458] systemd[1]: Starting Ensure /etc/mtab is a symlink to /proc/mounts...
[ 10.560857] systemd[1]: Starting Load/Save Random Seed...
[ 10.561553] systemd[1]: Started Ensure /etc/mtab is a symlink to /proc/mounts.
[ 10.567866] systemd[1]: Started Load/Save Random Seed.
[ 10.632395] systemd[1]: Started Setup Virtual Console.
[ 10.653086] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 10.653538] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 10.654274] systemd[1]: Started udev Coldplug all Devices.
[ 10.677796] systemd[1]: Started Uncomplicated firewall.
[ 10.745216] systemd[1]: Started Create Static Device Nodes in /dev.
[ 10.745715] systemd[1]: Starting udev Kernel Device Manager...
[ 10.762736] systemd[1]: Started LVM2 metadata daemon.
[ 10.815289] systemd[1]: Started Journal Service.
[ 10.846462] lp: driver loaded but no devices found
[ 10.848450] ppdev: user-space parallel port driver
[ 10.850029] parport_pc 00:06: reported by Plug and Play ACPI
[ 10.850084] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 10.871908] systemd-journald[1032]: Received request to flush runtime journal from PID 1
[ 10.935733] lp0: using parport0 (interrupt-driven).
[ 11.028248] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.216374] AVX2 version of gcm_enc/dec engaged.
[ 11.216376] AES CTR mode by8 optimization enabled
[ 11.236541] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 11.276487] Adding 4393980k swap on /dev/sda1. Priority:-1 extents:1 across:4393980k SSFS
[ 11.282272] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 11.282275] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.282276] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 11.282277] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 11.282278] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 11.282279] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 11.282280] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 11.282281] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 11.286550] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 11.286610] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 11.286666] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 11.293430] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 11.293496] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 11.293551] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 11.293612] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 11.293678] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[ 11.357198] intel_rapl: Found RAPL domain package
[ 11.357200] intel_rapl: Found RAPL domain core
[ 11.357201] intel_rapl: Found RAPL domain uncore
[ 11.357202] intel_rapl: Found RAPL domain dram
[ 11.553558] cgroup: new mount options do not match the existing superblock, will be ignored
[ 12.725001] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 12.799238] r8169 0000:02:00.0 enp2s0: link down
[ 12.799266] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
Hors ligne
#4 Le 21/01/2016, à 16:41
- moko138
Re : Carte PCI Silverstone ECU01 non reconnue ?
je ne vois que deux mentions "fail", dont l'une est relative à "casper" : es-tu en live ???
l'autre à kdbus.
donne aussi
sudo lshw
On voit aussi
0.095905] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
0.113616] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
"PCIe ASPM", ça me fait penser à
UASP (USB Attached SCSI Protocol)
de ta carte PCIe-usb3.
et à propos de "using BIOS configuration", cherche dans ton bios (probablement à propos de l'acpi) quelle serait la solution de repli.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#5 Le 21/01/2016, à 16:44
- barbamaman
Re : Carte PCI Silverstone ECU01 non reconnue ?
Re,
oui je suis en live,
résultat de la commande :
ubuntu@ubuntu:~$ sudo lshw
ubuntu
description: Computer
width: 64 bits
capabilities: smbios-2.8 vsyscall32
*-core
description: Motherboard
physical id: 0
*-memory
description: System memory
physical id: 0
size: 7870MiB
*-cpu
product: Intel(R) Core(TM) i3-4160 CPU @ 3.60GHz
vendor: Intel Corp.
physical id: 1
bus info: cpu@0
size: 3600MHz
capacity: 3600MHz
width: 64 bits
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm arat pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid xsaveopt cpufreq
*-pci
description: Host bridge
product: 4th Gen Core Processor DRAM Controller
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 06
width: 32 bits
clock: 33MHz
configuration: driver=hsw_uncore
resources: irq:0
*-display
description: VGA compatible controller
product: 4th Generation Core Processor Family Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 06
width: 64 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:27 memory:f7800000-f7bfffff memory:e0000000-efffffff ioport:f000(size=64)
*-multimedia:0
description: Audio device
product: Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller
vendor: Intel Corporation
physical id: 3
bus info: pci@0000:00:03.0
version: 06
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:30 memory:f7d14000-f7d17fff
*-usb:0
description: USB controller
product: 9 Series Chipset Family USB xHCI Controller
vendor: Intel Corporation
physical id: 14
bus info: pci@0000:00:14.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm msi xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
resources: irq:24 memory:f7d00000-f7d0ffff
*-usbhost:0
product: xHCI Host Controller
vendor: Linux 4.2.0-16-generic xhci-hcd
physical id: 0
bus info: usb@2
logical name: usb2
version: 4.02
capabilities: usb-3.00
configuration: driver=hub slots=6 speed=5000Mbit/s
*-usb
description: Mass storage device
product: USB Reader
vendor: Genesys
physical id: 6
bus info: usb@2:6
logical name: scsi7
version: 5.51
serial: 000000000696
capabilities: usb-3.00 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=896mA speed=5000Mbit/s
*-disk:0
description: SCSI Disk
product: STORAGE DEVICE
vendor: Generic
physical id: 0.0.0
bus info: scsi@7:0.0.0
logical name: /dev/sdd
version: 0551
serial: 000000000551
capabilities: removable
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512
*-medium
physical id: 0
logical name: /dev/sdd
*-disk:1
description: SCSI Disk
product: STORAGE DEVICE
vendor: Generic
physical id: 0.0.1
bus info: scsi@7:0.0.1
logical name: /dev/sde
version: 0551
serial: 000000000551
capabilities: removable
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512
*-medium
physical id: 0
logical name: /dev/sde
*-disk:2
description: SCSI Disk
product: STORAGE DEVICE
vendor: Generic
physical id: 0.0.2
bus info: scsi@7:0.0.2
logical name: /dev/sdf
version: 0551
serial: 000000000551
capabilities: removable
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512
*-medium
physical id: 0
logical name: /dev/sdf
*-disk:3
description: SCSI Disk
product: STORAGE DEVICE
vendor: Generic
physical id: 0.0.3
bus info: scsi@7:0.0.3
logical name: /dev/sdg
version: 0551
serial: 000000000551
capabilities: removable
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512
*-medium
physical id: 0
logical name: /dev/sdg
*-disk:4
description: SCSI Disk
product: STORAGE DEVICE
vendor: Generic
physical id: 0.0.4
bus info: scsi@7:0.0.4
logical name: /dev/sdh
version: 0551
serial: 000000000551
capabilities: removable
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512
*-medium
physical id: 0
logical name: /dev/sdh
*-usbhost:1
product: xHCI Host Controller
vendor: Linux 4.2.0-16-generic xhci-hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 4.02
capabilities: usb-2.00
configuration: driver=hub slots=14 speed=480Mbit/s
*-usb:0
description: Mass storage device
product: USB DISK 2.0
physical id: 1
bus info: usb@1:1
logical name: scsi6
version: 1.00
serial: 07A20113E1B44F14
capabilities: usb-2.00 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=200mA speed=480Mbit/s
*-disk
description: SCSI Disk
physical id: 0.0.0
bus info: scsi@6:0.0.0
logical name: /dev/sdc
size: 3824MiB (4009MB)
capabilities: partitioned partitioned:dos
configuration: logicalsectorsize=512 sectorsize=512 signature=000aedf6
*-volume
description: Windows FAT volume
vendor: SYSLINUX
physical id: 1
bus info: scsi@6:0.0.0,1
logical name: /dev/sdc1
logical name: /cdrom
version: FAT32
serial: 9d4e-c012
size: 3821MiB
capacity: 3821MiB
capabilities: primary bootable fat initialized
configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro state=mounted
*-usb:1
description: Keyboard
product: USB Keykoard
vendor: USB
physical id: 5
bus info: usb@1:5
version: 1.10
capabilities: usb-1.10
configuration: driver=usbhid maxpower=98mA speed=2Mbit/s
*-usb:2
description: Mouse
product: PS/2+USB Mouse
vendor: Logic3 / SpectraVideo plc
physical id: 6
bus info: usb@1:6
version: 22.70
capabilities: usb-1.10
configuration: driver=usbhid maxpower=100mA speed=2Mbit/s
*-communication
description: Communication controller
product: 9 Series Chipset Family ME Interface #1
vendor: Intel Corporation
physical id: 16
bus info: pci@0000:00:16.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm msi bus_master cap_list
configuration: driver=mei_me latency=0
resources: irq:28 memory:f7d1d000-f7d1d00f
*-usb:1
description: USB controller
product: 9 Series Chipset Family USB EHCI Controller #2
vendor: Intel Corporation
physical id: 1a
bus info: pci@0000:00:1a.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
resources: irq:16 memory:f7d1b000-f7d1b3ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 4.2.0-16-generic ehci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 4.02
capabilities: usb-2.00
configuration: driver=hub slots=2 speed=480Mbit/s
*-usb
description: USB hub
vendor: Intel Corp.
physical id: 1
bus info: usb@3:1
version: 0.00
capabilities: usb-2.00
configuration: driver=hub slots=6 speed=480Mbit/s
*-multimedia:1
description: Audio device
product: 9 Series Chipset Family HD Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:29 memory:f7d10000-f7d13fff
*-pci:0
description: PCI bridge
product: 9 Series Chipset Family PCI Express Root Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: d0
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:16
*-pci:1
description: PCI bridge
product: 9 Series Chipset Family PCI Express Root Port 6
vendor: Intel Corporation
physical id: 1c.5
bus info: pci@0000:00:1c.5
version: d0
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:17 ioport:e000(size=4096) memory:f7c00000-f7cfffff ioport:f0000000(size=1048576)
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: enp2s0
version: 0c
serial: d8:cb:8a:56:f7:51
size: 1Gbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168g-2_0.0.1 02/06/13 ip=192.168.0.36 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s
resources: irq:25 ioport:e000(size=256) memory:f7c00000-f7c00fff memory:f0000000-f0003fff
*-pci:2
description: PCI bridge
product: 82801 PCI Bridge
vendor: Intel Corporation
physical id: 1c.6
bus info: pci@0000:00:1c.6
version: d0
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm subtractive_decode bus_master cap_list
*-pci
description: PCI bridge
product: ASM1083/1085 PCIe to PCI Bridge
vendor: ASMedia Technology Inc.
physical id: 0
bus info: pci@0000:03:00.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: pci msi pm pciexpress normal_decode bus_master cap_list
*-usb:2
description: USB controller
product: 9 Series Chipset Family USB EHCI Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
resources: irq:23 memory:f7d1a000-f7d1a3ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 4.2.0-16-generic ehci_hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 4.02
capabilities: usb-2.00
configuration: driver=hub slots=2 speed=480Mbit/s
*-usb
description: USB hub
vendor: Intel Corp.
physical id: 1
bus info: usb@4:1
version: 0.00
capabilities: usb-2.00
configuration: driver=hub slots=8 speed=480Mbit/s
*-isa
description: ISA bridge
product: 9 Series Chipset Family Z97 LPC Controller
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
resources: irq:0
*-storage
description: SATA controller
product: 9 Series Chipset Family SATA Controller [AHCI Mode]
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
version: 00
width: 32 bits
clock: 66MHz
capabilities: storage msi pm ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=0
resources: irq:26 ioport:f0b0(size=8) ioport:f0a0(size=4) ioport:f090(size=8) ioport:f080(size=4) ioport:f060(size=32) memory:f7d19000-f7d197ff
*-serial UNCLAIMED
description: SMBus
product: 9 Series Chipset Family SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 00
width: 64 bits
clock: 33MHz
configuration: latency=0
resources: memory:f7d18000-f7d180ff ioport:f040(size=32)
*-scsi:0
physical id: 2
logical name: scsi0
capabilities: emulated
*-disk
description: ATA Disk
product: SanDisk SDSSDHII
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: 00RL
serial: 150682400878
size: 111GiB (120GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=3b57ccdd
*-volume:0
description: Linux swap volume
physical id: 1
bus info: scsi@0:0.0.0,1
logical name: /dev/sda1
version: 1
serial: f0d4764c-30f9-49e3-b3c2-89e020eb5243
size: 4291MiB
capacity: 4291MiB
capabilities: primary nofs swap initialized
configuration: filesystem=swap pagesize=4096
*-volume:1
description: EXT4 volume
vendor: Linux
physical id: 2
bus info: scsi@0:0.0.0,2
logical name: /dev/sda2
version: 1.0
serial: ac137c86-81d2-494a-9b05-4804fe5154c4
size: 107GiB
capacity: 107GiB
capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2015-07-23 09:14:22 filesystem=ext4 lastmountpoint=/ modified=2015-07-24 12:44:33 mounted=2015-07-24 12:44:33 state=clean
*-scsi:1
physical id: 3
logical name: scsi1
capabilities: emulated
*-disk
description: ATA Disk
product: ST1000DM003-1ER1
vendor: Seagate
physical id: 0.0.0
bus info: scsi@1:0.0.0
logical name: /dev/sdb
version: CC45
serial: S4Y32NW0
size: 931GiB (1TB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=4096 signature=99f470dc
*-volume
description: EXT4 volume
vendor: Linux
physical id: 1
bus info: scsi@1:0.0.0,1
logical name: /dev/sdb1
version: 1.0
serial: 0440f8e2-a8a2-4186-bdd3-be1e510405e1
size: 931GiB
capacity: 931GiB
capabilities: primary journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2015-07-23 09:14:12 filesystem=ext4 lastmountpoint=/home modified=2016-01-20 15:46:23 mounted=2016-01-20 15:19:45 state=clean
Hors ligne
#6 Le 21/01/2016, à 17:10
- moko138
Re : Carte PCI Silverstone ECU01 non reconnue ?
Je note
*-usb:0
configuration: driver=xhci_hcd
Puisque tu es en live, essaie d'installer (si du moins c'est ton intention) en étant connecté et en cochant la ligne "télécharger...".
Sans garantie.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#7 Le 21/01/2016, à 17:17
- barbamaman
Re : Carte PCI Silverstone ECU01 non reconnue ?
re, ok je vais essayer
voici mon bios : http://imgur.com/a/USaWW/all
Hors ligne
#8 Le 21/01/2016, à 17:25
- moko138
Re : Carte PCI Silverstone ECU01 non reconnue ?
et dans "PCIe", rien?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#9 Le 21/01/2016, à 17:51
- barbamaman
Re : Carte PCI Silverstone ECU01 non reconnue ?
dans PCI pas grand chose : http://imgur.com/a/uvvz1
Hors ligne
#10 Le 21/01/2016, à 18:44
- barbamaman
Re : Carte PCI Silverstone ECU01 non reconnue ?
re, bon bah j'ai installé et tout est mis à jour, et la carte ne fonctionne tjrs pas
que puis-je tenter de modifier dans le bios ?
Hors ligne
#11 Le 21/01/2016, à 18:45
- barbamaman
Re : Carte PCI Silverstone ECU01 non reconnue ?
après installation, au cas ou
ordi@ordi-MS-7850:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.0-25-generic (buildd@lcy01-02) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #30-Ubuntu SMP Mon Jan 18 12:31:50 UTC 2016 (Ubuntu 4.2.0-25.30-generic 4.2.6)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-25-generic root=UUID=43bb30ed-20bf-40e4-a850-1e0973a7c57e ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c82ddfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c82de000-0x00000000c82e4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c82e5000-0x00000000c8731fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c8732000-0x00000000c8d42fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c8d43000-0x00000000d960cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d960d000-0x00000000d9677fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9678000-0x00000000d96c3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d96c4000-0x00000000d97fcfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d97fd000-0x00000000d9ffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: MSI MS-7850/Z97 PC Mate(MS-7850), BIOS V4.7 12/23/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00DC000000 mask 7FFC000000 uncachable
[ 0.000000] 4 base 00DB000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 021FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB
[ 0.000000] reg 1, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 3, base: 3520MB, range: 64MB, type UC
[ 0.000000] reg 4, base: 3504MB, range: 16MB, type UC
[ 0.000000] reg 5, base: 8702MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 8110M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 8 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 512MB, type WB
[ 0.000000] reg 3, base: 3504MB, range: 16MB, type UC
[ 0.000000] reg 4, base: 3520MB, range: 64MB, type UC
[ 0.000000] reg 5, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 6, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 7, base: 8702MB, range: 2MB, type UC
[ 0.000000] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xda000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf] mapped at [ffff8800000fd7b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01ff0000, 0x01ff0fff] PGTABLE
[ 0.000000] BRK [0x01ff1000, 0x01ff1fff] PGTABLE
[ 0.000000] BRK [0x01ff2000, 0x01ff2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21fc00000-0x21fdfffff]
[ 0.000000] [mem 0x21fc00000-0x21fdfffff] page 2M
[ 0.000000] BRK [0x01ff3000, 0x01ff3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fbfffff]
[ 0.000000] [mem 0x200000000-0x21fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1e0000000-0x1ffffffff]
[ 0.000000] [mem 0x1e0000000-0x1ffffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc82ddfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xc81fffff] page 2M
[ 0.000000] [mem 0xc8200000-0xc82ddfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc82e5000-0xc8731fff]
[ 0.000000] [mem 0xc82e5000-0xc83fffff] page 4k
[ 0.000000] [mem 0xc8400000-0xc85fffff] page 2M
[ 0.000000] [mem 0xc8600000-0xc8731fff] page 4k
[ 0.000000] BRK [0x01ff4000, 0x01ff4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xc8d43000-0xd960cfff]
[ 0.000000] [mem 0xc8d43000-0xc8dfffff] page 4k
[ 0.000000] [mem 0xc8e00000-0xd95fffff] page 2M
[ 0.000000] [mem 0xd9600000-0xd960cfff] page 4k
[ 0.000000] BRK [0x01ff5000, 0x01ff5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xd9678000-0xd96c3fff]
[ 0.000000] [mem 0xd9678000-0xd96c3fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd9fff000-0xd9ffffff]
[ 0.000000] [mem 0xd9fff000-0xd9ffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1dfffffff]
[ 0.000000] [mem 0x100000000-0x1dfffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x33fda000-0x35fe4fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000D97C8088 000094 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000D97D94B0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000D97C81B8 0112F5 (v02 ALASKA A M I 00000015 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000D97FCF80 000040
[ 0.000000] ACPI: APIC 0x00000000D97D95C0 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000D97D9638 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000D97D9680 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: ASF! 0x00000000D97D9720 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000D97D97C8 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000D97DA448 000539 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000D97DA988 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000D97DB500 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000D97DB540 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D97DB578 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000D97DB8E8 005B5D (v02 SaSsdt SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: UEFI 0x00000000D97E1448 000042 (v01 ALASKA A M I 01072009 00000000)
[ 0.000000] ACPI: SSDT 0x00000000D97E1490 0005AC (v02 Intel_ IsctTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21fdf7000-0x21fdfbfff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217400000-ffff88021f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c82ddfff]
[ 0.000000] node 0: [mem 0x00000000c82e5000-0x00000000c8731fff]
[ 0.000000] node 0: [mem 0x00000000c8d43000-0x00000000d960cfff]
[ 0.000000] node 0: [mem 0x00000000d9678000-0x00000000d96c3fff]
[ 0.000000] node 0: [mem 0x00000000d9fff000-0x00000000d9ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
[ 0.000000] On node 0 totalpages: 2067934
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13826 pages used for memmap
[ 0.000000] DMA32 zone: 884802 pages, LIFO batch:31
[ 0.000000] Normal zone: 18424 pages used for memmap
[ 0.000000] Normal zone: 1179136 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdb200000-0xdf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc82de000-0xc82e4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc8732000-0xc8d42fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd960d000-0xd9677fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd96c4000-0xd97fcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd97fd000-0xd9ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88021fa00000 s96728 r8192 d30248 u524288
[ 0.000000] pcpu-alloc: s96728 r8192 d30248 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2035599
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-25-generic root=UUID=43bb30ed-20bf-40e4-a850-1e0973a7c57e ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8024556K/8271736K available (8148K kernel code, 1237K rwdata, 3800K rodata, 1460K init, 1292K bss, 247180K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16640 nr_irqs:456 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3600.273 MHz processor
[ 0.000019] Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.54 BogoMIPS (lpj=14401092)
[ 0.000020] pid_max: default: 32768 minimum: 301
[ 0.000024] ACPI: Core revision 20150619
[ 0.010856] ACPI: All ACPI Tables successfully acquired
[ 0.010868] Security Framework initialized
[ 0.010874] AppArmor: AppArmor initialized
[ 0.010875] Yama: becoming mindful.
[ 0.011218] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.012225] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012663] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012670] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012809] Initializing cgroup subsys blkio
[ 0.012811] Initializing cgroup subsys memory
[ 0.012816] Initializing cgroup subsys devices
[ 0.012817] Initializing cgroup subsys freezer
[ 0.012819] Initializing cgroup subsys net_cls
[ 0.012820] Initializing cgroup subsys perf_event
[ 0.012821] Initializing cgroup subsys net_prio
[ 0.012823] Initializing cgroup subsys hugetlb
[ 0.012838] CPU: Physical Processor ID: 0
[ 0.012838] CPU: Processor Core ID: 0
[ 0.013549] mce: CPU supports 7 MCE banks
[ 0.013557] CPU0: Thermal monitoring enabled (TM1)
[ 0.013562] process: using mwait in idle threads
[ 0.013564] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.013565] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.013784] Freeing SMP alternatives memory: 28K (ffffffff81ea4000 - ffffffff81eab000)
[ 0.023620] ftrace: allocating 30910 entries in 121 pages
[ 0.032183] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.071810] TSC deadline timer enabled
[ 0.071813] smpboot: CPU0: Intel(R) Core(TM) i3-4160 CPU @ 3.60GHz (fam: 06, model: 3c, stepping: 03)
[ 0.071831] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.071844] ... version: 3
[ 0.071845] ... bit width: 48
[ 0.071846] ... generic registers: 4
[ 0.071846] ... value mask: 0000ffffffffffff
[ 0.071847] ... max period: 0000ffffffffffff
[ 0.071847] ... fixed-purpose events: 3
[ 0.071848] ... event mask: 000000070000000f
[ 0.072348] x86: Booting SMP configuration:
[ 0.072349] .... node #0, CPUs: #1
[ 0.076199] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.076252] #2 #3
[ 0.083928] x86: Booted up 1 node, 4 CPUs
[ 0.083930] smpboot: Total of 4 processors activated (28802.18 BogoMIPS)
[ 0.086427] devtmpfs: initialized
[ 0.087801] evm: security.selinux
[ 0.087802] evm: security.SMACK64
[ 0.087803] evm: security.SMACK64EXEC
[ 0.087803] evm: security.SMACK64TRANSMUTE
[ 0.087804] evm: security.SMACK64MMAP
[ 0.087804] evm: security.ima
[ 0.087805] evm: security.capability
[ 0.087836] PM: Registering ACPI NVS region [mem 0xc82de000-0xc82e4fff] (28672 bytes)
[ 0.087837] PM: Registering ACPI NVS region [mem 0xd96c4000-0xd97fcfff] (1282048 bytes)
[ 0.087892] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.087942] pinctrl core: initialized pinctrl subsystem
[ 0.088011] RTC time: 16:41:41, date: 01/21/16
[ 0.088080] NET: Registered protocol family 16
[ 0.094303] cpuidle: using governor ladder
[ 0.098297] cpuidle: using governor menu
[ 0.098339] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.098340] ACPI: bus type PCI registered
[ 0.098341] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.098382] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.098383] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.098389] PCI: Using configuration type 1 for base access
[ 0.098529] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.102491] ACPI: Added _OSI(Module Device)
[ 0.102493] ACPI: Added _OSI(Processor Device)
[ 0.102493] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.102494] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.105432] ACPI: Executed 6 blocks of module-level executable AML code
[ 0.107411] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.107937] ACPI: Dynamic OEM Table Load:
[ 0.107941] ACPI: SSDT 0xFFFF880215D12400 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.108402] ACPI: Dynamic OEM Table Load:
[ 0.108405] ACPI: SSDT 0xFFFF880215CFA000 0005AA (v02 PmRef ApIst 00003000 INTL 20051117)
[ 0.108896] ACPI: Dynamic OEM Table Load:
[ 0.108899] ACPI: SSDT 0xFFFF880215D33A00 000119 (v02 PmRef ApCst 00003000 INTL 20051117)
[ 0.109652] ACPI: Interpreter enabled
[ 0.109657] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[ 0.109661] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[ 0.109675] ACPI: (supports S0 S3 S4 S5)
[ 0.109676] ACPI: Using IOAPIC for interrupt routing
[ 0.109694] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.109981] ACPI: Power Resource [PG00] (on)
[ 0.110152] ACPI: Power Resource [PG01] (on)
[ 0.110319] ACPI: Power Resource [PG02] (on)
[ 0.115241] ACPI: Power Resource [FN00] (off)
[ 0.115286] ACPI: Power Resource [FN01] (off)
[ 0.115328] ACPI: Power Resource [FN02] (off)
[ 0.115370] ACPI: Power Resource [FN03] (off)
[ 0.115412] ACPI: Power Resource [FN04] (off)
[ 0.115930] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.115933] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.116062] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.116137] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.116138] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.116390] PCI host bridge to bus 0000:00
[ 0.116392] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.116393] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.116394] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.116395] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.116396] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.116397] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.116398] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.116399] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.116400] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.116400] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.116401] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.116406] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.116461] pci 0000:00:02.0: [8086:041e] type 00 class 0x030000
[ 0.116469] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.116473] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.116476] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.116522] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.116529] pci 0000:00:03.0: reg 0x10: [mem 0xf7d14000-0xf7d17fff 64bit]
[ 0.116595] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[ 0.116616] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[ 0.116655] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.116684] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.116709] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[ 0.116731] pci 0000:00:16.0: reg 0x10: [mem 0xf7d1d000-0xf7d1d00f 64bit]
[ 0.116773] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.116834] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[ 0.116857] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d1b000-0xf7d1b3ff]
[ 0.116914] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.116945] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.116969] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[ 0.116990] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit]
[ 0.117035] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.117069] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.117092] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[ 0.117140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.117182] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.117208] pci 0000:00:1c.5: [8086:8c9a] type 01 class 0x060400
[ 0.117257] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.117297] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.117320] pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
[ 0.117368] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.117407] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.117432] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[ 0.117456] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d1a000-0xf7d1a3ff]
[ 0.117513] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.117543] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.117569] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[ 0.117692] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[ 0.117709] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.117715] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.117720] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.117726] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.117732] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.117738] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d19000-0xf7d197ff]
[ 0.117757] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.117798] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[ 0.117811] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d18000-0xf7d180ff 64bit]
[ 0.117827] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.117924] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.117988] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.118024] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.118050] pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
[ 0.118066] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.118120] pci 0000:02:00.0: supports D1 D2
[ 0.118121] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.118153] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.122281] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.122284] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.122287] pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.122291] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.122355] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060400
[ 0.122463] pci 0000:03:00.0: supports D1 D2
[ 0.122463] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.122493] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.130267] pci 0000:00:1c.6: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.130274] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.130275] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.130276] pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.130277] pci 0000:00:1c.6: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.130277] pci 0000:00:1c.6: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.130278] pci 0000:00:1c.6: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.130279] pci 0000:00:1c.6: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.130280] pci 0000:00:1c.6: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.130281] pci 0000:00:1c.6: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.130282] pci 0000:00:1c.6: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.130388] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.130902] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.130935] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.130964] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.130993] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.131022] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.131051] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.131080] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.131108] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.131291] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.131355] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.131356] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.131358] vgaarb: loaded
[ 0.131359] vgaarb: bridge control possible 0000:00:02.0
[ 0.131510] SCSI subsystem initialized
[ 0.131537] libata version 3.00 loaded.
[ 0.131552] ACPI: bus type USB registered
[ 0.131561] usbcore: registered new interface driver usbfs
[ 0.131566] usbcore: registered new interface driver hub
[ 0.131575] usbcore: registered new device driver usb
[ 0.131662] PCI: Using ACPI for IRQ routing
[ 0.132820] PCI: pci_cache_line_size set to 64 bytes
[ 0.132852] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.132853] e820: reserve RAM buffer [mem 0xc82de000-0xcbffffff]
[ 0.132854] e820: reserve RAM buffer [mem 0xc8732000-0xcbffffff]
[ 0.132855] e820: reserve RAM buffer [mem 0xd960d000-0xdbffffff]
[ 0.132855] e820: reserve RAM buffer [mem 0xd96c4000-0xdbffffff]
[ 0.132856] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
[ 0.132857] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[ 0.132921] NetLabel: Initializing
[ 0.132922] NetLabel: domain hash size = 128
[ 0.132923] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.132930] NetLabel: unlabeled traffic allowed by default
[ 0.132972] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.132975] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.134991] clocksource: Switched to clocksource hpet
[ 0.138528] AppArmor: AppArmor Filesystem Enabled
[ 0.138574] pnp: PnP ACPI init
[ 0.138667] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.138670] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.138746] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.138747] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.138763] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.138786] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.138788] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.138857] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.138858] system 00:04: [io 0x0a10-0x0a1f] has been reserved
[ 0.138859] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.138954] pnp 00:05: [dma 0 disabled]
[ 0.138995] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.139140] pnp 00:06: [dma 0 disabled]
[ 0.139195] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.139224] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.139225] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.139459] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.139460] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.139461] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.139463] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.139464] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.139465] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.139466] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.139467] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.139469] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.139470] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.139471] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.139472] system 00:08: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 0.139474] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.139591] pnp: PnP ACPI: found 9 devices
[ 0.145266] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.145297] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.145306] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.145308] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.145312] pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.145315] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.145319] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.145335] pci 0000:00:1c.6: PCI bridge to [bus 03-04]
[ 0.145344] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.145345] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.145346] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.145347] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.145347] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.145348] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.145349] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.145350] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.145351] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.145352] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.145353] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.145354] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.145355] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.145356] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.145357] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.145357] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.145358] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.145359] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.145360] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.145361] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.145362] pci_bus 0000:03: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.145363] pci_bus 0000:03: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.145363] pci_bus 0000:03: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.145383] NET: Registered protocol family 2
[ 0.145484] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.145571] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.145671] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.145688] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.145707] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.145741] NET: Registered protocol family 1
[ 0.145752] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.146038] PCI: CLS 64 bytes, default 64
[ 0.146076] Trying to unpack rootfs image as initramfs...
[ 0.461454] Freeing initrd memory: 32812K (ffff880033fda000 - ffff880035fe5000)
[ 0.461461] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.461463] software IO TLB [mem 0xd560d000-0xd960d000] (64MB) mapped at [ffff8800d560d000-ffff8800d960cfff]
[ 0.461508] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.461509] hw unit of domain pp0-core 2^-14 Joules
[ 0.461509] hw unit of domain package 2^-14 Joules
[ 0.461510] hw unit of domain dram 2^-14 Joules
[ 0.461510] hw unit of domain pp1-gpu 2^-14 Joules
[ 0.461588] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1c
[ 0.461594] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1c
[ 0.461597] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1c
[ 0.461602] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1c
[ 0.461632] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.461685] Scanning for low memory corruption every 60 seconds
[ 0.461877] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.461890] Initialise system trusted keyring
[ 0.461904] audit: initializing netlink subsys (disabled)
[ 0.461915] audit: type=2000 audit(1453394501.452:1): initialized
[ 0.462126] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.462126] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.463017] zpool: loaded
[ 0.463019] zbud: loaded
[ 0.463130] VFS: Disk quotas dquot_6.6.0
[ 0.463150] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.463425] fuse init (API version 7.23)
[ 0.463508] Key type big_key registered
[ 0.463749] Key type asymmetric registered
[ 0.463751] Asymmetric key parser 'x509' registered
[ 0.463760] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.463787] io scheduler noop registered
[ 0.463789] io scheduler deadline registered (default)
[ 0.463807] io scheduler cfq registered
[ 0.464034] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.464038] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.464058] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.464059] vesafb: scrolling: redraw
[ 0.464060] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.464068] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001000000, using 8128k, total 8128k
[ 0.464131] Console: switching to colour frame buffer device 240x67
[ 0.464145] fb0: VESA VGA frame buffer device
[ 0.464156] intel_idle: MWAIT substates: 0x42120
[ 0.464156] intel_idle: v0.4 model 0x3C
[ 0.464157] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.464310] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.464312] ACPI: Power Button [PWRB]
[ 0.464334] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.464335] ACPI: Sleep Button [SLPB]
[ 0.464357] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.464358] ACPI: Power Button [PWRF]
[ 0.464813] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.464814] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.464927] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.464928] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.464965] GHES: HEST is not enabled!
[ 0.465019] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.485344] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.486413] Linux agpgart interface v0.103
[ 0.487651] brd: module loaded
[ 0.488166] loop: module loaded
[ 0.488290] libphy: Fixed MDIO Bus: probed
[ 0.488291] tun: Universal TUN/TAP device driver, 1.6
[ 0.488292] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.488319] PPP generic driver version 2.4.2
[ 0.488417] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.488420] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.489477] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.489482] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.489538] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.489539] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.489540] usb usb1: Product: xHCI Host Controller
[ 0.489541] usb usb1: Manufacturer: Linux 4.2.0-25-generic xhci-hcd
[ 0.489542] usb usb1: SerialNumber: 0000:00:14.0
[ 0.489609] hub 1-0:1.0: USB hub found
[ 0.489623] hub 1-0:1.0: 14 ports detected
[ 0.492460] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.492462] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.492488] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.492488] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.492489] usb usb2: Product: xHCI Host Controller
[ 0.492490] usb usb2: Manufacturer: Linux 4.2.0-25-generic xhci-hcd
[ 0.492491] usb usb2: SerialNumber: 0000:00:14.0
[ 0.492550] hub 2-0:1.0: USB hub found
[ 0.492560] hub 2-0:1.0: 6 ports detected
[ 0.493741] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.493744] ehci-pci: EHCI PCI platform driver
[ 0.493802] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.493805] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.493814] ehci-pci 0000:00:1a.0: debug port 2
[ 0.497704] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.497710] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d1b000
[ 0.506419] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.506441] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.506441] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.506442] usb usb3: Product: EHCI Host Controller
[ 0.506443] usb usb3: Manufacturer: Linux 4.2.0-25-generic ehci_hcd
[ 0.506444] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.506521] hub 3-0:1.0: USB hub found
[ 0.506524] hub 3-0:1.0: 2 ports detected
[ 0.506637] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.506640] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.506648] ehci-pci 0000:00:1d.0: debug port 2
[ 0.510532] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.510538] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1a000
[ 0.522394] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.522414] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.522415] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.522416] usb usb4: Product: EHCI Host Controller
[ 0.522416] usb usb4: Manufacturer: Linux 4.2.0-25-generic ehci_hcd
[ 0.522417] usb usb4: SerialNumber: 0000:00:1d.0
[ 0.522496] hub 4-0:1.0: USB hub found
[ 0.522498] hub 4-0:1.0: 2 ports detected
[ 0.522562] ehci-platform: EHCI generic platform driver
[ 0.522568] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.522571] ohci-pci: OHCI PCI platform driver
[ 0.522576] ohci-platform: OHCI generic platform driver
[ 0.522581] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.522611] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.525140] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.525143] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.525358] mousedev: PS/2 mouse device common for all mice
[ 0.525669] rtc_cmos 00:02: RTC can wake from S4
[ 0.525780] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.525802] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.525807] i2c /dev entries driver
[ 0.525852] device-mapper: uevent: version 1.0.3
[ 0.525898] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[ 0.525909] Intel P-state driver initializing.
[ 0.526013] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.526287] PCCT header not found.
[ 0.526810] NET: Registered protocol family 10
[ 0.527243] NET: Registered protocol family 17
[ 0.527299] Key type dns_resolver registered
[ 0.528239] Loading compiled-in X.509 certificates
[ 0.530430] Loaded X.509 cert 'Build time autogenerated kernel key: a41030fbdf1dc962b4bb7d1644c3337ec416db86'
[ 0.530441] registered taskstats version 1
[ 0.530453] zswap: loading zswap
[ 0.530454] zswap: using zbud pool
[ 0.530457] zswap: using lzo compressor
[ 0.531631] Key type trusted registered
[ 0.533648] Key type encrypted registered
[ 0.533653] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.533656] ima: No TPM chip found, activating TPM-bypass!
[ 0.533668] evm: HMAC attrs: 0x1
[ 0.533971] Magic number: 0:377:692
[ 0.534060] rtc_cmos 00:02: setting system clock to 2016-01-21 16:41:42 UTC (1453394502)
[ 0.534107] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.534107] EDD information not available.
[ 0.534156] PM: Hibernation image not present or could not be loaded.
[ 0.534341] Freeing unused kernel memory: 1460K (ffffffff81d37000 - ffffffff81ea4000)
[ 0.534342] Write protecting the kernel read-only data: 12288k
[ 0.534437] Freeing unused kernel memory: 32K (ffff8800017f8000 - ffff880001800000)
[ 0.534490] Freeing unused kernel memory: 296K (ffff880001bb6000 - ffff880001c00000)
[ 0.540566] random: systemd-udevd urandom read with 2 bits of entropy available
[ 0.558407] wmi: Mapper loaded
[ 0.568750] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.568756] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.571238] [drm] Initialized drm 1.1.0 20060810
[ 0.571645] ahci 0000:00:1f.2: version 3.0
[ 0.571779] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 0.571781] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.576041] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000ea6000, d8:cb:8a:56:f7:51, XID 0c000800 IRQ 26
[ 0.576043] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.578969] scsi host0: ahci
[ 0.579065] scsi host1: ahci
[ 0.579143] scsi host2: ahci
[ 0.579214] scsi host3: ahci
[ 0.579329] scsi host4: ahci
[ 0.579400] scsi host5: ahci
[ 0.579441] ata1: SATA max UDMA/133 abar m2048@0xf7d19000 port 0xf7d19100 irq 25
[ 0.579444] ata2: SATA max UDMA/133 abar m2048@0xf7d19000 port 0xf7d19180 irq 25
[ 0.579445] ata3: DUMMY
[ 0.579446] ata4: DUMMY
[ 0.579447] ata5: DUMMY
[ 0.579448] ata6: DUMMY
[ 0.591530] [drm] Memory usable by graphics device = 2048M
[ 0.591533] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[ 0.591535] fb: switching to inteldrmfb from VESA VGA
[ 0.591558] Console: switching to colour dummy device 80x25
[ 0.591611] [drm] Replacing VGA console driver
[ 0.594665] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 0.598195] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.598196] [drm] Driver supports precise vblank timestamp query.
[ 0.598250] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.676239] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.676568] acpi device:16: registered as cooling_device9
[ 0.676625] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 0.676704] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
[ 0.712860] fbcon: inteldrmfb (fb0) is primary device
[ 0.712905] Console: switching to colour frame buffer device 240x67
[ 0.712920] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 0.712921] i915 0000:00:02.0: registered panic notifier
[ 0.805975] usb 1-5: new low-speed USB device number 2 using xhci_hcd
[ 0.806231] usb 2-6: new SuperSpeed USB device number 2 using xhci_hcd
[ 0.817955] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 0.824605] usb 2-6: New USB device found, idVendor=05e3, idProduct=0732
[ 0.824607] usb 2-6: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[ 0.824608] usb 2-6: Product: USB Reader
[ 0.824609] usb 2-6: Manufacturer: Genesys
[ 0.824610] usb 2-6: SerialNumber: 000000000696
[ 0.828768] usb-storage 2-6:1.0: USB Mass Storage device detected
[ 0.828855] scsi host6: usb-storage 2-6:1.0
[ 0.830012] usbcore: registered new interface driver usb-storage
[ 0.830819] usbcore: registered new interface driver uas
[ 0.833907] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 0.897813] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.897846] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.898512] ata2.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133
[ 0.898514] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.898642] ata1.00: ATA-9: SanDisk SDSSDHII120G, X31200RL, max UDMA/133
[ 0.898643] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 0.899179] ata2.00: configured for UDMA/133
[ 0.900205] ata1.00: configured for UDMA/133
[ 0.900288] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDHII 00RL PQ: 0 ANSI: 5
[ 0.900412] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 0.900424] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.900457] sd 0:0:0:0: [sda] Write Protect is off
[ 0.900459] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.900472] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.900502] scsi 1:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
[ 0.900638] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 0.900648] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.900650] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 0.900681] sd 1:0:0:0: [sdb] Write Protect is off
[ 0.900683] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.900700] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.900859] sda: sda1 sda2 < sda5 >
[ 0.901105] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.929932] sdb: sdb1
[ 0.930105] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 0.950066] usb 3-1: New USB device found, idVendor=8087, idProduct=8009
[ 0.950068] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.950322] hub 3-1:1.0: USB hub found
[ 0.950439] hub 3-1:1.0: 6 ports detected
[ 0.966028] usb 4-1: New USB device found, idVendor=8087, idProduct=8001
[ 0.966030] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.966178] hub 4-1:1.0: USB hub found
[ 0.966278] hub 4-1:1.0: 8 ports detected
[ 1.047975] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.125844] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[ 1.135768] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 1.135849] systemd[1]: Detected architecture x86-64.
[ 1.135979] systemd[1]: Set hostname to <ordi-MS-7850>.
[ 1.191836] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.191871] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.191880] systemd[1]: Reached target Encrypted Volumes.
[ 1.191899] systemd[1]: Created slice Root Slice.
[ 1.191919] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.191939] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.191959] systemd[1]: Listening on udev Control Socket.
[ 1.191967] systemd[1]: Reached target Remote File Systems (Pre).
[ 1.191988] systemd[1]: Listening on Journal Socket.
[ 1.192040] systemd[1]: Listening on Journal Audit Socket.
[ 1.192089] systemd[1]: Created slice User and Session Slice.
[ 1.192105] systemd[1]: Listening on udev Kernel Socket.
[ 1.192113] systemd[1]: Reached target User and Group Name Lookups.
[ 1.192127] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 1.192170] systemd[1]: Created slice System Slice.
[ 1.192435] systemd[1]: Starting Increase datagram queue length...
[ 1.192452] systemd[1]: Reached target Slices.
[ 1.193212] systemd[1]: Starting Load Kernel Modules...
[ 1.193604] systemd[1]: Started Braille Device Support.
[ 1.193809] systemd[1]: Created slice system-getty.slice.
[ 1.194110] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.194370] systemd[1]: Starting Setup Virtual Console...
[ 1.194659] systemd[1]: Starting Uncomplicated firewall...
[ 1.194740] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1.195032] systemd[1]: Started Read required files in advance.
[ 1.195360] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.195661] systemd[1]: Mounting Debug File System...
[ 1.196091] systemd[1]: Starting udev Coldplug all Devices...
[ 1.196543] systemd[1]: Mounting Huge Pages File System...
[ 1.201534] systemd[1]: Started Setup Virtual Console.
[ 1.202573] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 1.203037] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1.204082] systemd[1]: Mounted Debug File System.
[ 1.204103] systemd[1]: Mounted Huge Pages File System.
[ 1.204112] systemd[1]: Mounted POSIX Message Queue File System.
[ 1.204230] systemd[1]: Started Increase datagram queue length.
[ 1.204355] systemd[1]: Started Uncomplicated firewall.
[ 1.204549] systemd[1]: Listening on Syslog Socket.
[ 1.204823] systemd[1]: Starting Journal Service...
[ 1.219366] lp: driver loaded but no devices found
[ 1.223552] ppdev: user-space parallel port driver
[ 1.225547] parport_pc 00:06: reported by Plug and Play ACPI
[ 1.225611] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 1.231268] systemd[1]: Started Create Static Device Nodes in /dev.
[ 1.231696] systemd[1]: Starting udev Kernel Device Manager...
[ 1.240776] systemd[1]: Started udev Coldplug all Devices.
[ 1.248082] systemd[1]: Started Journal Service.
[ 1.266556] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 1.272226] systemd-journald[247]: Received request to flush runtime journal from PID 1
[ 1.321251] lp0: using parport0 (interrupt-driven).
[ 1.332237] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.389947] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 1.397672] AVX2 version of gcm_enc/dec engaged.
[ 1.397674] AES CTR mode by8 optimization enabled
[ 1.410661] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
[ 1.411466] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 1.411467] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.411469] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 1.411469] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 1.411470] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 1.411471] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 1.411472] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 1.411473] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 1.415958] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
[ 1.416269] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 1.427184] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 1.427241] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 1.427368] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 1.427430] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 1.427485] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 1.428659] Adding 4914172k swap on /dev/sda5. Priority:-1 extents:1 across:4914172k SSFS
[ 1.437866] intel_rapl: Found RAPL domain package
[ 1.437869] intel_rapl: Found RAPL domain core
[ 1.437873] intel_rapl: Found RAPL domain uncore
[ 1.437874] intel_rapl: Found RAPL domain dram
[ 1.456996] tsc: Refined TSC clocksource calibration: 3599.998 MHz
[ 1.457001] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e451ab1a6, max_idle_ns: 440795278720 ns
[ 1.628927] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.690755] audit: type=1400 audit(1453394503.656:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=522 comm="apparmor_parser"
[ 1.690760] audit: type=1400 audit(1453394503.656:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=522 comm="apparmor_parser"
[ 1.692882] audit: type=1400 audit(1453394503.660:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=522 comm="apparmor_parser"
[ 1.692886] audit: type=1400 audit(1453394503.660:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=522 comm="apparmor_parser"
[ 1.692890] audit: type=1400 audit(1453394503.660:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=522 comm="apparmor_parser"
[ 1.692894] audit: type=1400 audit(1453394503.660:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=522 comm="apparmor_parser"
[ 1.702657] audit: type=1400 audit(1453394503.668:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=522 comm="apparmor_parser"
[ 1.702662] audit: type=1400 audit(1453394503.668:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=522 comm="apparmor_parser"
[ 1.702665] audit: type=1400 audit(1453394503.668:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=522 comm="apparmor_parser"
[ 1.763512] cgroup: new mount options do not match the existing superblock, will be ignored
[ 1.770616] random: nonblocking pool is initialized
[ 1.825385] scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 0551 PQ: 0 ANSI: 5
[ 1.825732] scsi 6:0:0:1: Direct-Access Generic STORAGE DEVICE 0551 PQ: 0 ANSI: 5
[ 1.826067] scsi 6:0:0:2: Direct-Access Generic STORAGE DEVICE 0551 PQ: 0 ANSI: 5
[ 1.826406] scsi 6:0:0:3: Direct-Access Generic STORAGE DEVICE 0551 PQ: 0 ANSI: 5
[ 1.826741] scsi 6:0:0:4: Direct-Access Generic STORAGE DEVICE 0551 PQ: 0 ANSI: 5
[ 1.827534] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 1.827673] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 1.827783] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 1.827881] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 1.827975] sd 6:0:0:4: Attached scsi generic sg6 type 0
[ 1.828075] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 1.846084] sd 6:0:0:2: [sde] Attached SCSI removable disk
[ 1.846507] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 1.846921] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[ 1.847346] sd 6:0:0:4: [sdg] Attached SCSI removable disk
[ 1.908029] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 1.950697] r8169 0000:02:00.0 enp2s0: link down
[ 1.950716] r8169 0000:02:00.0 enp2s0: link down
[ 1.950741] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 2.455495] clocksource: Switched to clocksource tsc
[ 4.590823] r8169 0000:02:00.0 enp2s0: link up
[ 4.590830] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 11.006015] usb 1-5: device descriptor read/64, error -110
[ 11.247446] usb 1-5: New USB device found, idVendor=1c4f, idProduct=0002
[ 11.247448] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.247449] usb 1-5: Product: USB Keykoard
[ 11.247450] usb 1-5: Manufacturer: USB
[ 11.247588] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 11.247591] usb 1-5: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 11.413341] usb 1-6: new low-speed USB device number 3 using xhci_hcd
[ 11.601791] usb 1-6: New USB device found, idVendor=1267, idProduct=0210
[ 11.601793] usb 1-6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 11.601794] usb 1-6: Product: PS/2+USB Mouse
[ 11.601920] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 11.612647] hidraw: raw HID events driver (C) Jiri Kosina
[ 11.621573] usbcore: registered new interface driver usbhid
[ 11.621575] usbhid: USB HID core driver
[ 11.623643] input: USB USB Keykoard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:1C4F:0002.0001/input/input15
[ 11.677026] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:14.0-5/input0
[ 11.677144] input: USB USB Keykoard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:1C4F:0002.0002/input/input16
[ 11.732951] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:14.0-5/input1
[ 11.733040] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:1267:0210.0003/input/input17
[ 11.792880] hid-generic 0003:1267:0210.0003: input,hidraw2: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:14.0-6/input0
[ 34.877312] usb 1-5: USB disconnect, device number 2
[ 38.400173] usb 1-5: new low-speed USB device number 4 using xhci_hcd
[ 38.539251] usb 1-5: New USB device found, idVendor=1c4f, idProduct=0002
[ 38.539253] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 38.539254] usb 1-5: Product: USB Keykoard
[ 38.539255] usb 1-5: Manufacturer: USB
[ 38.539393] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 38.539397] usb 1-5: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 38.542001] input: USB USB Keykoard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:1C4F:0002.0004/input/input18
[ 38.598881] hid-generic 0003:1C4F:0002.0004: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:14.0-5/input0
[ 38.601060] input: USB USB Keykoard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:1C4F:0002.0005/input/input19
[ 38.655505] hid-generic 0003:1C4F:0002.0005: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:14.0-5/input1
[ 39.037338] usb 1-6: USB disconnect, device number 3
[ 51.730280] usb 1-6: new low-speed USB device number 5 using xhci_hcd
[ 51.863478] usb 1-6: New USB device found, idVendor=1267, idProduct=0210
[ 51.863480] usb 1-6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 51.863481] usb 1-6: Product: PS/2+USB Mouse
[ 51.863619] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 51.867151] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:1267:0210.0006/input/input20
[ 51.867305] hid-generic 0003:1267:0210.0006: input,hidraw2: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:14.0-6/input0
[ 53.113331] usb 1-6: USB disconnect, device number 5
[ 71.422318] usb 1-6: new low-speed USB device number 6 using xhci_hcd
[ 71.610909] usb 1-6: New USB device found, idVendor=1267, idProduct=0210
[ 71.610916] usb 1-6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 71.610920] usb 1-6: Product: PS/2+USB Mouse
[ 71.611125] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 71.615111] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:1267:0210.0007/input/input21
[ 71.615429] hid-generic 0003:1267:0210.0007: input,hidraw2: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:14.0-6/input0
ordi@ordi-MS-7850:~$ sudo lshw
Mot de passe [sudo] pour ordi :
ordi-ms-7850
description: Computer
bits: 64 bits
fonctionnalités: smbios-2.8 vsyscall32
*-core
description: Motherboard
identifiant matériel: 0
*-memory
description: Mémoire système
identifiant matériel: 0
taille: 7870MiB
*-cpu
produit: Intel(R) Core(TM) i3-4160 CPU @ 3.60GHz
fabriquant: Intel Corp.
identifiant matériel: 1
information bus: cpu@0
taille: 3600MHz
bits: 64 bits
fonctionnalités: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm arat pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid xsaveopt cpufreq
*-pci
description: Host bridge
produit: 4th Gen Core Processor DRAM Controller
fabriquant: Intel Corporation
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: 06
bits: 32 bits
horloge: 33MHz
configuration: driver=hsw_uncore
ressources: irq:0
*-display
description: VGA compatible controller
produit: 4th Generation Core Processor Family Integrated Graphics Controller
fabriquant: Intel Corporation
identifiant matériel: 2
information bus: pci@0000:00:02.0
version: 06
bits: 64 bits
horloge: 33MHz
fonctionnalités: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
ressources: irq:27 mémoire:f7800000-f7bfffff mémoire:e0000000-efffffff portE/S:f000(taille=64)
*-multimedia:0
description: Audio device
produit: Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller
fabriquant: Intel Corporation
identifiant matériel: 3
information bus: pci@0000:00:03.0
version: 06
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
ressources: irq:30 mémoire:f7d14000-f7d17fff
*-usb:0
description: USB controller
produit: 9 Series Chipset Family USB xHCI Controller
fabriquant: Intel Corporation
identifiant matériel: 14
information bus: pci@0000:00:14.0
version: 00
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
ressources: irq:24 mémoire:f7d00000-f7d0ffff
*-usbhost:0
produit: xHCI Host Controller
fabriquant: Linux 4.2.0-25-generic xhci-hcd
identifiant matériel: 0
information bus: usb@2
nom logique: usb2
version: 4.02
fonctionnalités: usb-3.00
configuration: driver=hub slots=6 speed=5000Mbit/s
*-usb
description: Périphérique de stockage de masse
produit: USB Reader
fabriquant: Genesys
identifiant matériel: 6
information bus: usb@2:6
nom logique: scsi6
version: 5.51
numéro de série: 000000000696
fonctionnalités: usb-3.00 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=896mA speed=5000Mbit/s
*-disk:0
description: SCSI Disk
produit: STORAGE DEVICE
fabriquant: Generic
identifiant matériel: 0.0.0
information bus: scsi@6:0.0.0
nom logique: /dev/sdc
version: 0551
numéro de série: 000000000551
fonctionnalités: removable
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512
*-medium
identifiant matériel: 0
nom logique: /dev/sdc
*-disk:1
description: SCSI Disk
produit: STORAGE DEVICE
fabriquant: Generic
identifiant matériel: 0.0.1
information bus: scsi@6:0.0.1
nom logique: /dev/sdd
version: 0551
numéro de série: 000000000551
fonctionnalités: removable
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512
*-medium
identifiant matériel: 0
nom logique: /dev/sdd
*-disk:2
description: SCSI Disk
produit: STORAGE DEVICE
fabriquant: Generic
identifiant matériel: 0.0.2
information bus: scsi@6:0.0.2
nom logique: /dev/sde
version: 0551
numéro de série: 000000000551
fonctionnalités: removable
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512
*-medium
identifiant matériel: 0
nom logique: /dev/sde
*-disk:3
description: SCSI Disk
produit: STORAGE DEVICE
fabriquant: Generic
identifiant matériel: 0.0.3
information bus: scsi@6:0.0.3
nom logique: /dev/sdf
version: 0551
numéro de série: 000000000551
fonctionnalités: removable
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512
*-medium
identifiant matériel: 0
nom logique: /dev/sdf
*-disk:4
description: SCSI Disk
produit: STORAGE DEVICE
fabriquant: Generic
identifiant matériel: 0.0.4
information bus: scsi@6:0.0.4
nom logique: /dev/sdg
version: 0551
numéro de série: 000000000551
fonctionnalités: removable
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512
*-medium
identifiant matériel: 0
nom logique: /dev/sdg
*-usbhost:1
produit: xHCI Host Controller
fabriquant: Linux 4.2.0-25-generic xhci-hcd
identifiant matériel: 1
information bus: usb@1
nom logique: usb1
version: 4.02
fonctionnalités: usb-2.00
configuration: driver=hub slots=14 speed=480Mbit/s
*-usb:0
description: Clavier
produit: USB Keykoard
fabriquant: USB
identifiant matériel: 5
information bus: usb@1:5
version: 1.10
fonctionnalités: usb-1.10
configuration: driver=usbhid maxpower=98mA speed=1Mbit/s
*-usb:1
description: Souris
produit: PS/2+USB Mouse
fabriquant: Logic3 / SpectraVideo plc
identifiant matériel: 6
information bus: usb@1:6
version: 22.70
fonctionnalités: usb-1.10
configuration: driver=usbhid maxpower=100mA speed=1Mbit/s
*-communication
description: Communication controller
produit: 9 Series Chipset Family ME Interface #1
fabriquant: Intel Corporation
identifiant matériel: 16
information bus: pci@0000:00:16.0
version: 00
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list
configuration: driver=mei_me latency=0
ressources: irq:28 mémoire:f7d1d000-f7d1d00f
*-usb:1
description: USB controller
produit: 9 Series Chipset Family USB EHCI Controller #2
fabriquant: Intel Corporation
identifiant matériel: 1a
information bus: pci@0000:00:1a.0
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
ressources: irq:16 mémoire:f7d1b000-f7d1b3ff
*-usbhost
produit: EHCI Host Controller
fabriquant: Linux 4.2.0-25-generic ehci_hcd
identifiant matériel: 1
information bus: usb@3
nom logique: usb3
version: 4.02
fonctionnalités: usb-2.00
configuration: driver=hub slots=2 speed=480Mbit/s
*-usb
description: Concentrateur USB
fabriquant: Intel Corp.
identifiant matériel: 1
information bus: usb@3:1
version: 0.00
fonctionnalités: usb-2.00
configuration: driver=hub slots=6 speed=480Mbit/s
*-multimedia:1
description: Audio device
produit: 9 Series Chipset Family HD Audio Controller
fabriquant: Intel Corporation
identifiant matériel: 1b
information bus: pci@0000:00:1b.0
version: 00
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
ressources: irq:29 mémoire:f7d10000-f7d13fff
*-pci:0
description: PCI bridge
produit: 9 Series Chipset Family PCI Express Root Port 1
fabriquant: Intel Corporation
identifiant matériel: 1c
information bus: pci@0000:00:1c.0
version: d0
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:16
*-pci:1
description: PCI bridge
produit: 9 Series Chipset Family PCI Express Root Port 6
fabriquant: Intel Corporation
identifiant matériel: 1c.5
information bus: pci@0000:00:1c.5
version: d0
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:17 portE/S:e000(taille=4096) mémoire:f7c00000-f7cfffff portE/S:f0000000(taille=1048576)
*-network
description: Ethernet interface
produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
fabriquant: Realtek Semiconductor Co., Ltd.
identifiant matériel: 0
information bus: pci@0000:02:00.0
nom logique: enp2s0
version: 0c
numéro de série: d8:cb:8a:56:f7:51
taille: 1Gbit/s
capacité: 1Gbit/s
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168g-2_0.0.1 02/06/13 ip=192.168.0.36 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s
ressources: irq:26 portE/S:e000(taille=256) mémoire:f7c00000-f7c00fff mémoire:f0000000-f0003fff
*-pci:2
description: PCI bridge
produit: 82801 PCI Bridge
fabriquant: Intel Corporation
identifiant matériel: 1c.6
information bus: pci@0000:00:1c.6
version: d0
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm subtractive_decode bus_master cap_list
*-pci
description: PCI bridge
produit: ASM1083/1085 PCIe to PCI Bridge
fabriquant: ASMedia Technology Inc.
identifiant matériel: 0
information bus: pci@0000:03:00.0
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci msi pm pciexpress normal_decode bus_master cap_list
*-usb:2
description: USB controller
produit: 9 Series Chipset Family USB EHCI Controller #1
fabriquant: Intel Corporation
identifiant matériel: 1d
information bus: pci@0000:00:1d.0
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
ressources: irq:23 mémoire:f7d1a000-f7d1a3ff
*-usbhost
produit: EHCI Host Controller
fabriquant: Linux 4.2.0-25-generic ehci_hcd
identifiant matériel: 1
information bus: usb@4
nom logique: usb4
version: 4.02
fonctionnalités: usb-2.00
configuration: driver=hub slots=2 speed=480Mbit/s
*-usb
description: Concentrateur USB
fabriquant: Intel Corp.
identifiant matériel: 1
information bus: usb@4:1
version: 0.00
fonctionnalités: usb-2.00
configuration: driver=hub slots=8 speed=480Mbit/s
*-isa
description: ISA bridge
produit: 9 Series Chipset Family Z97 LPC Controller
fabriquant: Intel Corporation
identifiant matériel: 1f
information bus: pci@0000:00:1f.0
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
ressources: irq:0
*-storage
description: SATA controller
produit: 9 Series Chipset Family SATA Controller [AHCI Mode]
fabriquant: Intel Corporation
identifiant matériel: 1f.2
information bus: pci@0000:00:1f.2
version: 00
bits: 32 bits
horloge: 66MHz
fonctionnalités: storage msi pm ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=0
ressources: irq:25 portE/S:f0b0(taille=8) portE/S:f0a0(taille=4) portE/S:f090(taille=8) portE/S:f080(taille=4) portE/S:f060(taille=32) mémoire:f7d19000-f7d197ff
*-serial NON-RÉCLAMÉ
description: SMBus
produit: 9 Series Chipset Family SMBus Controller
fabriquant: Intel Corporation
identifiant matériel: 1f.3
information bus: pci@0000:00:1f.3
version: 00
bits: 64 bits
horloge: 33MHz
configuration: latency=0
ressources: mémoire:f7d18000-f7d180ff portE/S:f040(taille=32)
*-scsi:0
identifiant matériel: 2
nom logique: scsi0
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: SanDisk SDSSDHII
identifiant matériel: 0.0.0
information bus: scsi@0:0.0.0
nom logique: /dev/sda
version: 00RL
numéro de série: 150682400878
taille: 111GiB (120GB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=3b57ccdd
*-volume:0
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 1
information bus: scsi@0:0.0.0,1
nom logique: /dev/sda1
nom logique: /
version: 1.0
numéro de série: 43bb30ed-20bf-40e4-a850-1e0973a7c57e
taille: 107GiB
capacité: 107GiB
fonctionnalités: primary bootable journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2016-01-21 17:26:51 filesystem=ext4 lastmountpoint=/ modified=2016-01-21 17:41:43 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2016-01-21 17:35:09 state=mounted
*-volume:1
description: Extended partition
identifiant matériel: 2
information bus: scsi@0:0.0.0,2
nom logique: /dev/sda2
taille: 4799MiB
capacité: 4799MiB
fonctionnalités: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux swap / Solaris partition
identifiant matériel: 5
nom logique: /dev/sda5
capacité: 4799MiB
fonctionnalités: nofs
*-scsi:1
identifiant matériel: 3
nom logique: scsi1
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: ST1000DM003-1ER1
fabriquant: Seagate
identifiant matériel: 0.0.0
information bus: scsi@1:0.0.0
nom logique: /dev/sdb
version: CC45
numéro de série: S4Y32NW0
taille: 931GiB (1TB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=4096 signature=99f470dc
*-volume
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 1
information bus: scsi@1:0.0.0,1
nom logique: /dev/sdb1
nom logique: /home
version: 1.0
numéro de série: 02c4b827-4af2-4e1b-a9bf-fe8b63c961fb
taille: 931GiB
capacité: 931GiB
fonctionnalités: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration: created=2016-01-21 17:26:52 filesystem=ext4 lastmountpoint=/home modified=2016-01-21 17:41:43 mount.fstype=ext4 mount.options=rw,relatime,data=ordered mounted=2016-01-21 17:41:43 state=mounted
Dernière modification par barbamaman (Le 21/01/2016, à 18:47)
Hors ligne
#12 Le 21/01/2016, à 22:58
- moko138
Re : Carte PCI Silverstone ECU01 non reconnue ?
[ 0.115933] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.116062] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.116137] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.116138] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
Mais heureusement, les 6 usb3 de ta carte-mère sont bien reconnues.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#13 Le 21/01/2016, à 23:23
- barbamaman
Re : Carte PCI Silverstone ECU01 non reconnue ?
C'est la carte pci ou ma carte mere en cause ? Car j'ai besoin d'autres ports usb3 internes.
Hors ligne
#14 Le 21/01/2016, à 23:43
- moko138
Re : Carte PCI Silverstone ECU01 non reconnue ?
Je ne peux pas te répondre avec certitude
bios,
contrôleur PCIe+processeur,
noyau...
Disons que la conjonction actuelle ne supporte pas ta carte.
Mais je ne sais pas ce que signifie "FADT",
et peut-être qu'il suffit de télécharger un pilote sur le site du fabricant,
ou peut-être qu'une mise à jour du système résoudra tout.
Et je ne sais pas ce que tu as trouvé ou pas sur ubuntuforums,
ça fait trop d'inconnues pour moi.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#15 Le 10/02/2016, à 23:56
- barbamaman
Re : Carte PCI Silverstone ECU01 non reconnue ?
Bon j'ai finalement renvoyé ma carte pour remboursement, le SAV Silverstone ne savait pas non plus ... Carte Inatek achetée et reconnue, et elle fonctionne bien^^
tant pis Silverstone
++
Hors ligne