Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#101 Le 08/04/2016, à 16:36

malbo

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

Moi, je ne trouve pas de bug mais je lance Boot-Info par la commande :

boot-info 

Je ne mets pas "sudo" en tête. C'est ce qui est indiqué dans la doc au paragraphe 2. Utilisation
Je colle toute l'installation (réalisée depuis une session d'un Ubuntu 16.04 installé) et le lancement de Boot-Info :

malbo@malbo-virtual-machine:~$ sudo add-apt-repository ppa:yannubuntu/boot-repair
[sudo] Mot de passe de malbo : 
 Simple tool to repair frequent boot problems.

Website: https://sourceforge.net/p/boot-repair/home
 Plus d’info : https://launchpad.net/~yannubuntu/+archive/ubuntu/boot-repair
Appuyez sur [ENTRÉE] pour continuer ou Ctrl-C pour annuler l’ajout

gpg: le porte-clefs « /tmp/tmpxlkva9p2/secring.gpg » a été créé
gpg: le porte-clefs « /tmp/tmpxlkva9p2/pubring.gpg » a été créé
gpg: demande de la clef 60D8DA0B sur le serveur hkp keyserver.ubuntu.com
gpg: /tmp/tmpxlkva9p2/trustdb.gpg : base de confiance créée
gpg: clef 60D8DA0B : clef publique « Launchpad PPA for YannUbuntu » importée
gpg: Quantité totale traitée : 1
gpg:               importées : 1  (RSA: 1)
OK
malbo@malbo-virtual-machine:~$ sudo apt-get update
Réception de:1 http://archive.ubuntu.com/ubuntu xenial InRelease [247 kB]
Réception de:2 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial InRelease [17,6 kB]
Réception de:3 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 Packages [1 978 B]
Atteint:4 http://archive.ubuntu.com/ubuntu xenial-updates InRelease            
Réception de:5 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main i386 Packages [1 978 B]
Réception de:6 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main Translation-en [2 123 B]
Atteint:7 http://archive.ubuntu.com/ubuntu xenial-backports InRelease          
Atteint:8 http://archive.ubuntu.com/ubuntu xenial-security InRelease
Réception de:9 http://archive.ubuntu.com/ubuntu xenial/main Sources [939 kB]
Réception de:10 http://archive.ubuntu.com/ubuntu xenial/universe Sources [7 680 kB]
Réception de:11 http://archive.ubuntu.com/ubuntu xenial/main amd64 Packages [1 281 kB]
Réception de:12 http://archive.ubuntu.com/ubuntu xenial/main i386 Packages [1 277 kB]
Réception de:13 http://archive.ubuntu.com/ubuntu xenial/main Translation-en [612 kB]
Réception de:14 http://archive.ubuntu.com/ubuntu xenial/universe amd64 Packages [7 391 kB]
Réception de:15 http://archive.ubuntu.com/ubuntu xenial/universe i386 Packages [7 372 kB]
Réception de:16 http://archive.ubuntu.com/ubuntu xenial/universe Translation-en [4 298 kB]
Réception de:17 http://archive.ubuntu.com/ubuntu xenial/universe amd64 DEP-11 Metadata [2 057 kB]
Réception de:18 http://archive.ubuntu.com/ubuntu xenial/universe DEP-11 64x64 Icons [7 491 kB]
40,7 Mo réceptionnés en 1min 15s (536 ko/s)                                    
AppStream cache update completed, but some metadata was ignored due to errors.
Lecture des listes de paquets... Fait
malbo@malbo-virtual-machine:~$ sudo apt-get install boot-repair boot-info
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
The following additional packages will be installed:
  boot-sav boot-sav-extra gawk glade2script libsigsegv2 pastebinit
Paquets suggérés :
  dmraid lvm2 cryptsetup mbr mdadm clean-ubiquity os-uninstaller gawk-doc
Les NOUVEAUX paquets suivants seront installés :
  boot-info boot-repair boot-sav boot-sav-extra gawk glade2script libsigsegv2
  pastebinit
0 mis à jour, 8 nouvellement installés, 0 à enlever et 3 non mis à jour.
Il est nécessaire de prendre 1 043 ko dans les archives.
Après cette opération, 5 083 ko d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] o
Réception de:1 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 glade2script all 3.2.2~ppa47~saucy [42,3 kB]
Réception de:2 http://archive.ubuntu.com/ubuntu xenial/main amd64 libsigsegv2 amd64 2.10-4 [14,1 kB]
Réception de:3 http://archive.ubuntu.com/ubuntu xenial/main amd64 gawk amd64 1:4.1.3+dfsg-0.1 [398 kB]
Réception de:4 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 boot-sav all 4ppa35 [414 kB]
Réception de:5 http://archive.ubuntu.com/ubuntu xenial/main amd64 pastebinit all 1.5-1 [14,6 kB]
Réception de:6 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 boot-info all 4ppa35 [5 980 B]
Réception de:7 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 boot-repair all 4ppa35 [11,6 kB]
Réception de:8 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 boot-sav-extra all 4ppa35 [142 kB]
1 043 ko réceptionnés en 2s (492 ko/s)
Sélection du paquet libsigsegv2:amd64 précédemment désélectionné.
(Lecture de la base de données... 188426 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../libsigsegv2_2.10-4_amd64.deb ...
Dépaquetage de libsigsegv2:amd64 (2.10-4) ...
Paramétrage de libsigsegv2:amd64 (2.10-4) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.23-0ubuntu2) ...
Sélection du paquet gawk précédemment désélectionné.
(Lecture de la base de données... 188434 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../gawk_1%3a4.1.3+dfsg-0.1_amd64.deb ...
Dépaquetage de gawk (1:4.1.3+dfsg-0.1) ...
Sélection du paquet glade2script précédemment désélectionné.
Préparation du dépaquetage de .../glade2script_3.2.2~ppa47~saucy_all.deb ...
Dépaquetage de glade2script (3.2.2~ppa47~saucy) ...
Sélection du paquet boot-sav précédemment désélectionné.
Préparation du dépaquetage de .../boot-sav_4ppa35_all.deb ...
Dépaquetage de boot-sav (4ppa35) ...
Sélection du paquet boot-info précédemment désélectionné.
Préparation du dépaquetage de .../boot-info_4ppa35_all.deb ...
Dépaquetage de boot-info (4ppa35) ...
Sélection du paquet boot-repair précédemment désélectionné.
Préparation du dépaquetage de .../boot-repair_4ppa35_all.deb ...
Dépaquetage de boot-repair (4ppa35) ...
Sélection du paquet boot-sav-extra précédemment désélectionné.
Préparation du dépaquetage de .../boot-sav-extra_4ppa35_all.deb ...
Dépaquetage de boot-sav-extra (4ppa35) ...
Sélection du paquet pastebinit précédemment désélectionné.
Préparation du dépaquetage de .../pastebinit_1.5-1_all.deb ...
Dépaquetage de pastebinit (1.5-1) ...
Traitement des actions différées (« triggers ») pour man-db (2.7.5-1) ...
Traitement des actions différées (« triggers ») pour gnome-menus (3.13.3-6ubuntu3) ...
Traitement des actions différées (« triggers ») pour desktop-file-utils (0.22-1ubuntu5) ...
Traitement des actions différées (« triggers ») pour mime-support (3.59ubuntu1) ...
Traitement des actions différées (« triggers ») pour bamfdaemon (0.5.3~bzr0+16.04.20160331-0ubuntu1) ...
Rebuilding /usr/share/applications/bamf-2.index...
Paramétrage de gawk (1:4.1.3+dfsg-0.1) ...
Paramétrage de glade2script (3.2.2~ppa47~saucy) ...
Paramétrage de boot-sav (4ppa35) ...
Paramétrage de boot-info (4ppa35) ...
Paramétrage de boot-repair (4ppa35) ...
Paramétrage de boot-sav-extra (4ppa35) ...
Paramétrage de pastebinit (1.5-1) ...
malbo@malbo-virtual-machine:~$ boot-info
malbo@malbo-virtual-machine:~$ 

Et il me sort bien l'URL en fin de Boot-Info : http://paste2.org/9yx4yC3F

Hors ligne

#102 Le 08/04/2016, à 17:01

Bougron

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

Lorsque j'utilise, l'icône  de boot-repair qui  été fabriqué lors de l'installation, une grille pour saisir le mot de passe s'affiche.
Lorsque je valide, le mot de passe introduit, l'application se termine immédiatement.

Lorque je frappe boot-repair ou boot-info, une grille pour saisir le mot de passe s'affiche.
Lorsque je valide, le mot de passe introduit, l'application se termine immédiatement et il y a le message suivant dans le terminal
     import gi
ImportError: No module named gi

Lorque je frappe sudo boot-repair ou sudo boot-info, une grille pour saisir le mot de passe s'affiche.
Lorsque je valide, le mot de passe introduit, l'application se termine immédiatement et il y a le message suivant dans le terminal
Traceback (most recent call last):
  File "/usr/bin/glade2script", line 48, in <module>
    import gi
ImportError: No module named gi

Il y a toutes les chances que cela soit un bug de la version ubuntu 12.04  plus ou moins corrigé et réapparu 4 ans plus tard https://forum.ubuntu-fr.org/viewtopic.php?pid=11264201

Dernière modification par Bougron (Le 08/04/2016, à 17:06)

Hors ligne

#103 Le 08/04/2016, à 17:33

malbo

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

@Bougron : ce que tu décris dans ton post #103, tu le fais depuis Ubuntu 16.04 installé sur ton disque dur ou bien tu le fais depuis une session live de Ubuntu 16.04 ?

Hors ligne

#104 Le 08/04/2016, à 17:46

Bougron

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

Je le fais depuis le disque dur.
Je ne peux absolument pas le faire  depuis une live USB.  je dispose seulement d'une connexion wifi. Dans ce contexte  ma carte wifi n'est pas opérationnelle en live-usb.
De plus, je n'ai pas de clé USB de la version 16.04 que j'ai installé directement à partir de la 14.04.4.
Mais comme, il y a déjà babdu89 et une autre personne qui ont signalé le problème, je ne pense pas que la méthode d'installation soit en cause.

Dernière modification par Bougron (Le 08/04/2016, à 17:50)

Hors ligne

#105 Le 08/04/2016, à 18:04

malbo

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

@Bougron  : je ne conteste pas que tu sois victime d'un bug mais moi je ne l'ai pas EDIT : ben si je l'ai. Voir post suivant...
Ici tu vois un Boot-Info réalisé par bhubuntu depuis une session live de Ubuntu 16.04 : https://forum.ubuntu-fr.org/viewtopic.p … #p21460958

Dernière modification par malbo (Le 09/04/2016, à 06:11)

Hors ligne

#106 Le 09/04/2016, à 06:02

malbo

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

Je le vois depuis une session live de Xenial (xenial-desktop-amd64.iso / Daily Build du 08-Apr-2016 08:03). C'est dans une machine virtuelle (VMware Player) qui fonctionne en mode EFI :

To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.

ubuntu@ubuntu:~$ sudo add-apt-repository ppa:yannubuntu/boot-repair
 Simple tool to repair frequent boot problems.

Website: https://sourceforge.net/p/boot-repair/home
 More info: https://launchpad.net/~yannubuntu/+archive/ubuntu/boot-repair
Press [ENTER] to continue or ctrl-c to cancel adding it

gpg: keyring `/tmp/tmprutu92p_/secring.gpg' created
gpg: keyring `/tmp/tmprutu92p_/pubring.gpg' created
gpg: requesting key 60D8DA0B from hkp server keyserver.ubuntu.com
gpg: /tmp/tmprutu92p_/trustdb.gpg: trustdb created
gpg: key 60D8DA0B: public key "Launchpad PPA for YannUbuntu" imported
gpg: Total number processed: 1
gpg:               imported: 1  (RSA: 1)
OK
ubuntu@ubuntu:~$ sudo apt-get update
Ign:1 cdrom://Ubuntu 16.04 LTS _Xenial Xerus_ - Beta amd64 (20160408) xenial InRelease
Hit:2 cdrom://Ubuntu 16.04 LTS _Xenial Xerus_ - Beta amd64 (20160408) xenial Release
Hit:3 http://security.ubuntu.com/ubuntu xenial-security InRelease
Get:5 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial InRelease [17.6 kB]
Get:6 http://archive.ubuntu.com/ubuntu xenial InRelease [298 kB]               
Get:7 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 Packages [1,978 B]
Get:8 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main Translation-en [2,123 B]
Hit:9 http://archive.ubuntu.com/ubuntu xenial-updates InRelease           
Get:10 http://archive.ubuntu.com/ubuntu xenial/main amd64 Packages [1,250 kB]
Get:11 http://archive.ubuntu.com/ubuntu xenial/main Translation-en [595 kB]
Get:12 http://archive.ubuntu.com/ubuntu xenial/main amd64 DEP-11 Metadata [646 kB]
Get:13 http://archive.ubuntu.com/ubuntu xenial/main DEP-11 64x64 Icons [399 kB]
Fetched 3,210 kB in 7s (412 kB/s)                                              

** (appstreamcli:2927): CRITICAL **: Error while moving old database out of the way.
AppStream cache update failed.
Reading package lists... Done
ubuntu@ubuntu:~$ sudo apt-get install boot-repair boot-info
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following additional packages will be installed:
  boot-sav boot-sav-extra gawk glade2script libsigsegv2 pastebinit
Suggested packages:
  mbr mdadm clean-ubiquity os-uninstaller gawk-doc
Recommended packages:
  gksu
The following NEW packages will be installed:
  boot-info boot-repair boot-sav boot-sav-extra gawk glade2script libsigsegv2
  pastebinit
0 upgraded, 8 newly installed, 0 to remove and 59 not upgraded.
Need to get 1,043 kB of archives.
After this operation, 5,083 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 glade2script all 3.2.2~ppa47~saucy [42.3 kB]
Get:2 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 boot-sav all 4ppa35 [414 kB]
Get:3 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 boot-info all 4ppa35 [5,980 B]
Get:4 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 boot-repair all 4ppa35 [11.6 kB]
Get:5 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 boot-sav-extra all 4ppa35 [142 kB]
Get:6 http://archive.ubuntu.com/ubuntu xenial/main amd64 libsigsegv2 amd64 2.10-4 [14.1 kB]
Get:7 http://archive.ubuntu.com/ubuntu xenial/main amd64 gawk amd64 1:4.1.3+dfsg-0.1 [398 kB]
Get:8 http://archive.ubuntu.com/ubuntu xenial/main amd64 pastebinit all 1.5-1 [14.6 kB]
Fetched 1,043 kB in 8s (121 kB/s)                                              
Selecting previously unselected package libsigsegv2:amd64.
(Reading database ... 190712 files and directories currently installed.)
Preparing to unpack .../libsigsegv2_2.10-4_amd64.deb ...
Unpacking libsigsegv2:amd64 (2.10-4) ...
Setting up libsigsegv2:amd64 (2.10-4) ...
Processing triggers for libc-bin (2.23-0ubuntu2) ...
Selecting previously unselected package gawk.
(Reading database ... 190720 files and directories currently installed.)
Preparing to unpack .../gawk_1%3a4.1.3+dfsg-0.1_amd64.deb ...
Unpacking gawk (1:4.1.3+dfsg-0.1) ...
Selecting previously unselected package glade2script.
Preparing to unpack .../glade2script_3.2.2~ppa47~saucy_all.deb ...
Unpacking glade2script (3.2.2~ppa47~saucy) ...
Selecting previously unselected package boot-sav.
Preparing to unpack .../boot-sav_4ppa35_all.deb ...
Unpacking boot-sav (4ppa35) ...
Selecting previously unselected package boot-info.
Preparing to unpack .../boot-info_4ppa35_all.deb ...
Unpacking boot-info (4ppa35) ...
Selecting previously unselected package boot-repair.
Preparing to unpack .../boot-repair_4ppa35_all.deb ...
Unpacking boot-repair (4ppa35) ...
Selecting previously unselected package boot-sav-extra.
Preparing to unpack .../boot-sav-extra_4ppa35_all.deb ...
Unpacking boot-sav-extra (4ppa35) ...
Selecting previously unselected package pastebinit.
Preparing to unpack .../pastebinit_1.5-1_all.deb ...
Unpacking pastebinit (1.5-1) ...
Processing triggers for man-db (2.7.5-1) ...
Processing triggers for gnome-menus (3.13.3-6ubuntu3) ...
Processing triggers for desktop-file-utils (0.22-1ubuntu5) ...
Processing triggers for bamfdaemon (0.5.3~bzr0+16.04.20160331-0ubuntu1) ...
Rebuilding /usr/share/applications/bamf-2.index...
Processing triggers for mime-support (3.59ubuntu1) ...
Setting up gawk (1:4.1.3+dfsg-0.1) ...
Setting up glade2script (3.2.2~ppa47~saucy) ...
Setting up boot-sav (4ppa35) ...
Setting up boot-info (4ppa35) ...
Setting up boot-repair (4ppa35) ...
Setting up boot-sav-extra (4ppa35) ...
Setting up pastebinit (1.5-1) ...
ubuntu@ubuntu:~$ boot-info
/usr/share/boot-sav/gui-g2slaunch.sh: line 33: hash: gksudo: not found
/usr/share/boot-sav/gui-g2slaunch.sh: line 35: hash: gksu: not found
ubuntu@ubuntu:~$ Traceback (most recent call last):
  File "/usr/bin/glade2script", line 48, in <module>
    import gi
ImportError: No module named gi

Boot-Info ne se lance pas et j'ai bien le fameux message dans le terminal :

ubuntu@ubuntu:~$ Traceback (most recent call last):
  File "/usr/bin/glade2script", line 48, in <module>
    import gi
ImportError: No module named gi

SOLUTION COMPLÈTEMENT EXPÉRIMENTALE : installer le paquet python-gi L'installation du paquet python-gi décrite ci-dessous n'est plus nécessaire après le 27 avril 2016 parce que Boot-Info a été mis à jour (voir le rapport de bug #1573302) : le paquet glade2script passe en version 3.2.3~ppa1 et le paquet boot-Info passe en version 4ppa37. Après cette mise à jour, le paquet python-gi fait partie des paquets installés automatiquement en même temps que Boot-Info


A utiliser en session live seulement parce que je ne sais pas quelle conséquence ça pourrait avoir d'installer ce paquet python-gi dans une session d'un Ubuntu installé. Je choisis d'installer d'abord ce paquet et ensuite j'installe Boot-Info suivant les indications de la doc. Je lance Boot-Info par la commande "boot-info" : Boot-info se lance et sort une URL comme attendu.

To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.

ubuntu@ubuntu:~$ sudo apt update
Ign:1 cdrom://Ubuntu 16.04 LTS _Xenial Xerus_ - Beta amd64 (20160408) xenial InRelease
Hit:2 cdrom://Ubuntu 16.04 LTS _Xenial Xerus_ - Beta amd64 (20160408) xenial Release
Hit:4 http://security.ubuntu.com/ubuntu xenial-security InRelease         
Get:5 http://archive.ubuntu.com/ubuntu xenial InRelease [298 kB]               
Hit:6 http://archive.ubuntu.com/ubuntu xenial-updates InRelease
Get:7 http://archive.ubuntu.com/ubuntu xenial/main amd64 Packages [1,250 kB]
Get:8 http://archive.ubuntu.com/ubuntu xenial/main Translation-en [595 kB]     
Get:9 http://archive.ubuntu.com/ubuntu xenial/main amd64 DEP-11 Metadata [646 kB]
Get:10 http://archive.ubuntu.com/ubuntu xenial/main DEP-11 64x64 Icons [399 kB]
Fetched 3,188 kB in 9s (321 kB/s)                                              

** (appstreamcli:2725): CRITICAL **: Error while moving old database out of the way.
AppStream cache update failed.
Reading package lists... Done
Building dependency tree       
Reading state information... Done
59 packages can be upgraded. Run 'apt list --upgradable' to see them.
ubuntu@ubuntu:~$ sudo apt install python-gi
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Suggested packages:
  python-gi-cairo
The following NEW packages will be installed:
  python-gi
0 upgraded, 1 newly installed, 0 to remove and 59 not upgraded.
Need to get 194 kB of archives.
After this operation, 693 kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu xenial/main amd64 python-gi amd64 3.20.0-0ubuntu1 [194 kB]
Fetched 194 kB in 1s (101 kB/s)                     
Selecting previously unselected package python-gi.
(Reading database ... 190712 files and directories currently installed.)
Preparing to unpack .../python-gi_3.20.0-0ubuntu1_amd64.deb ...
Unpacking python-gi (3.20.0-0ubuntu1) ...
Setting up python-gi (3.20.0-0ubuntu1) ...
ubuntu@ubuntu:~$ sudo add-apt-repository ppa:yannubuntu/boot-repair
 Simple tool to repair frequent boot problems.

Website: https://sourceforge.net/p/boot-repair/home
 More info: https://launchpad.net/~yannubuntu/+archive/ubuntu/boot-repair
Press [ENTER] to continue or ctrl-c to cancel adding it

gpg: keyring `/tmp/tmpsnan7wyu/secring.gpg' created
gpg: keyring `/tmp/tmpsnan7wyu/pubring.gpg' created
gpg: requesting key 60D8DA0B from hkp server keyserver.ubuntu.com
gpg: /tmp/tmpsnan7wyu/trustdb.gpg: trustdb created
gpg: key 60D8DA0B: public key "Launchpad PPA for YannUbuntu" imported
gpg: Total number processed: 1
gpg:               imported: 1  (RSA: 1)
OK
ubuntu@ubuntu:~$ sudo apt-get update
Ign:1 cdrom://Ubuntu 16.04 LTS _Xenial Xerus_ - Beta amd64 (20160408) xenial InRelease
Hit:2 cdrom://Ubuntu 16.04 LTS _Xenial Xerus_ - Beta amd64 (20160408) xenial Release
Get:4 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial InRelease [17.6 kB]
Hit:5 http://security.ubuntu.com/ubuntu xenial-security InRelease              
Get:6 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 Packages [1,978 B]
Hit:7 http://archive.ubuntu.com/ubuntu xenial InRelease  
Get:8 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main Translation-en [2,123 B]
Hit:9 http://archive.ubuntu.com/ubuntu xenial-updates InRelease
Fetched 21.7 kB in 0s (22.3 kB/s)
Reading package lists... Done
ubuntu@ubuntu:~$ sudo apt-get install boot-repair boot-info
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following additional packages will be installed:
  boot-sav boot-sav-extra gawk glade2script libsigsegv2 pastebinit
Suggested packages:
  mbr mdadm clean-ubiquity os-uninstaller gawk-doc
Recommended packages:
  gksu
The following NEW packages will be installed:
  boot-info boot-repair boot-sav boot-sav-extra gawk glade2script libsigsegv2
  pastebinit
0 upgraded, 8 newly installed, 0 to remove and 59 not upgraded.
Need to get 1,043 kB of archives.
After this operation, 5,083 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 glade2script all 3.2.2~ppa47~saucy [42.3 kB]
Get:2 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 boot-sav all 4ppa35 [414 kB]
Get:3 http://archive.ubuntu.com/ubuntu xenial/main amd64 libsigsegv2 amd64 2.10-4 [14.1 kB]
Get:4 http://archive.ubuntu.com/ubuntu xenial/main amd64 gawk amd64 1:4.1.3+dfsg-0.1 [398 kB]
Get:5 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 boot-info all 4ppa35 [5,980 B]
Get:6 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 boot-repair all 4ppa35 [11.6 kB]
Get:7 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 boot-sav-extra all 4ppa35 [142 kB]
Get:8 http://archive.ubuntu.com/ubuntu xenial/main amd64 pastebinit all 1.5-1 [14.6 kB]
Fetched 1,043 kB in 2s (400 kB/s)    
Selecting previously unselected package libsigsegv2:amd64.
(Reading database ... 190749 files and directories currently installed.)
Preparing to unpack .../libsigsegv2_2.10-4_amd64.deb ...
Unpacking libsigsegv2:amd64 (2.10-4) ...
Setting up libsigsegv2:amd64 (2.10-4) ...
Processing triggers for libc-bin (2.23-0ubuntu2) ...
Selecting previously unselected package gawk.
(Reading database ... 190757 files and directories currently installed.)
Preparing to unpack .../gawk_1%3a4.1.3+dfsg-0.1_amd64.deb ...
Unpacking gawk (1:4.1.3+dfsg-0.1) ...
Selecting previously unselected package glade2script.
Preparing to unpack .../glade2script_3.2.2~ppa47~saucy_all.deb ...
Unpacking glade2script (3.2.2~ppa47~saucy) ...
Selecting previously unselected package boot-sav.
Preparing to unpack .../boot-sav_4ppa35_all.deb ...
Unpacking boot-sav (4ppa35) ...
Selecting previously unselected package boot-info.
Preparing to unpack .../boot-info_4ppa35_all.deb ...
Unpacking boot-info (4ppa35) ...
Selecting previously unselected package boot-repair.
Preparing to unpack .../boot-repair_4ppa35_all.deb ...
Unpacking boot-repair (4ppa35) ...
Selecting previously unselected package boot-sav-extra.
Preparing to unpack .../boot-sav-extra_4ppa35_all.deb ...
Unpacking boot-sav-extra (4ppa35) ...
Selecting previously unselected package pastebinit.
Preparing to unpack .../pastebinit_1.5-1_all.deb ...
Unpacking pastebinit (1.5-1) ...
Processing triggers for man-db (2.7.5-1) ...
Processing triggers for gnome-menus (3.13.3-6ubuntu3) ...
Processing triggers for desktop-file-utils (0.22-1ubuntu5) ...
Processing triggers for bamfdaemon (0.5.3~bzr0+16.04.20160331-0ubuntu1) ...
Rebuilding /usr/share/applications/bamf-2.index...
Processing triggers for mime-support (3.59ubuntu1) ...
Setting up gawk (1:4.1.3+dfsg-0.1) ...
Setting up glade2script (3.2.2~ppa47~saucy) ...
Setting up boot-sav (4ppa35) ...
Setting up boot-info (4ppa35) ...
Setting up boot-repair (4ppa35) ...
Setting up boot-sav-extra (4ppa35) ...
Setting up pastebinit (1.5-1) ...
ubuntu@ubuntu:~$ boot-info
/usr/share/boot-sav/gui-g2slaunch.sh: line 33: hash: gksudo: not found
/usr/share/boot-sav/gui-g2slaunch.sh: line 35: hash: gksu: not found
ubuntu@ubuntu:~$ /usr/bin/glade2script:49: PyGIWarning: Gtk was imported without specifying a version first. Use gi.require_version('Gtk', '3.0') before import to ensure that the right version gets loaded.
  from gi.repository import Gtk
/usr/bin/glade2script:4800: PyGIWarning: Notify was imported without specifying a version first. Use gi.require_version('Notify', '0.7') before import to ensure that the right version gets loaded.
  from gi.repository import Notify
/usr/bin/glade2script:4804: PyGIWarning: AppIndicator3 was imported without specifying a version first. Use gi.require_version('AppIndicator3', '0.1') before import to ensure that the right version gets loaded.
  from gi.repository import AppIndicator3 as appindicator

On voit des choses un peu inquiétantes dans le terminal après le lancement de Boot-Info :

ubuntu@ubuntu:~$ /usr/bin/glade2script:49: PyGIWarning: Gtk was imported without specifying a version first. Use gi.require_version('Gtk', '3.0') before import to ensure that the right version gets loaded.
  from gi.repository import Gtk
/usr/bin/glade2script:4800: PyGIWarning: Notify was imported without specifying a version first. Use gi.require_version('Notify', '0.7') before import to ensure that the right version gets loaded.
  from gi.repository import Notify
/usr/bin/glade2script:4804: PyGIWarning: AppIndicator3 was imported without specifying a version first. Use gi.require_version('AppIndicator3', '0.1') before import to ensure that the right version gets loaded.
  from gi.repository import AppIndicator3 as appindicator

C'est sûr que c'est une solution bricolée...

URL du Boot-Info obtenu : http://paste2.org/w6eHDFeK
on peut y voir :

boot-info is executed in live-session (Ubuntu Xenial Xerus (development branch), xenial, Ubuntu, x86_64)

Apparemment, ce Boot-Info est correct.
A noter que le lancement par le tableau de bord ne fonctionne pas (si je clique sur l'icône de Boot-Info, il ne se passe rien) : je ne peux lancer Boot-Info que par la commande "boot-info" dans le terminal.

EDIT : je vérifie qu'il est possible d'installer le paquet python-gi après avoir installé Boot-Info. Je veux dire que si on lance Boot-Info par la commande "boot-info" dans le terminal et que ce dernier affiche "ImportError: No module named gi", on peut installer le paquet python-gi en passant la commande "sudo apt install python-gi" et après cela, on peut arriver à lancer Boot-Info par la commande "boot-info"

Dernière modification par malbo (Le 01/05/2016, à 08:34)

Hors ligne

#107 Le 09/04/2016, à 11:18

Bougron

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

Bonjour
Merci Malbo.
C'est parti pour l'installation sur la version sur disque

u1604btrfs@u1604btrfs:~$ sudo apt install python-gi
[sudo] Mot de passe de u1604btrfs : 
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  kde-l10n-engb kde-l10n-fr libglib2.0-0:i386 libgstreamer-plugins-base0.10-0 libgstreamer-plugins-base0.10-0:i386 libgstreamer0.10-0 libgstreamer0.10-0:i386
  libhunspell-1.3-0v5 liborc-0.4-0:i386
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
Paquets suggérés :
  python-gi-cairo
Les NOUVEAUX paquets suivants seront installés :
  python-gi
0 mis à jour, 1 nouvellement installés, 0 à enlever et 31 non mis à jour.
Il est nécessaire de prendre 194 ko dans les archives.
Après cette opération, 693 ko d'espace disque supplémentaires seront utilisés.
Réception de:1 http://fr.archive.ubuntu.com/ubuntu xenial/main amd64 python-gi amd64 3.20.0-0ubuntu1 [194 kB]
194 ko réceptionnés en 4s (44,8 ko/s)                    
Sélection du paquet python-gi précédemment désélectionné.
(Lecture de la base de données... 223648 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../python-gi_3.20.0-0ubuntu1_amd64.deb ...
Dépaquetage de python-gi (3.20.0-0ubuntu1) ...
Paramétrage de python-gi (3.20.0-0ubuntu1) ...
u1604btrfs@u1604btrfs:~$ boot-info
u1604btrfs@u1604btrfs:~$

Comme j'ai une ancienne DAILY (version 01/04), J'ai un petit problème, Après avoir sélectionné le rapport en ligne, je n'obtiens  pas l'URL à fournir mais le message suivant

Un nouveau fichier (~/Boot-Info_2016-04-09__14h21.txt) va s'ouvrir dans votre visionneur de texte.

Si vous avez des problèmes de démarrage, indiquez le contenu de ce fichier aux personnes qui vous aident. Par exemple sur les forums ou via email

Qui plus est le visionneur de texte retenu n'est pas GEDIT    mais le terminal!     A priori le boot-info est complet mais plus difficile à lire.
On verra bien si  l'installation de cette librairie va gêner.  Mais comme j'utilise très peu de fonctionnalités cela ne sera pas concluant

A noter que le lancement par le tableau de bord  fonctionne bien

A noter que si je veux faire uniquement un rapport local,  j'ai bien le message disant que le rapport local va s'afficher dans le visionneur de texte. Mais rien ne s'ouvre!.

Pour info   Voir  https://forum.ubuntu-fr.org/viewtopic.p … #p21493271

Ajout du 12.04     Je viens de faire un upgrade , le noyau est maintenant en 4.4.0-18 Mais, toujours pas  d'URL à indiquer.

Dernière modification par Bougron (Le 12/04/2016, à 00:33)

Hors ligne

#108 Le 09/04/2016, à 11:39

malbo

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

Je viens de vérifier ça : quand la version Beta 1 de Xenial est sortie début mars 2016, il y avait python-gi (ainsi que python-gi-cairo et peut-être d'autres encore) dans le fichier .iso mais dès la mi-mars 2016, python-gi a disparu de la Daily Build de Xenial.

Hors ligne

#109 Le 09/04/2016, à 17:18

Babdu89

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

Bonjour.

Confirmation.
Chez moi.
Après avoir installé le paquet  python-gi  dans l'Os de tests xenial 14.04 iso en 32 bits à jour.
Les 3 outils; Boot-Repair, Os-Uninstaller, et Boot-Info  démarrent et fonctionnent, lancés depuis le menu ou en commande .   

Le boot-info ;
http://paste2.org/IZ6KGXaf

Pourquoi ce paquet  python-gi n'est plus dans l'iso xenial?.

@+. Babdu89  .


J'ai découvert Ubuntu avec la 07.10.... Et alors?!...  Depuis je regarde de temps en temps si Windows marche toujours....

Hors ligne

#110 Le 09/04/2016, à 17:45

malbo

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

Babdu89 a écrit :

Pourquoi ce paquet  python-gi n'est plus dans l'iso xenial?.

Moi je n'en sais rien.

Hors ligne

#111 Le 09/04/2016, à 18:51

moko138

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

Dans Precise :

apt-cache show python-gi
(...)

Description-en: Python 2.x bindings for gobject-introspection libraries
 GObject is an abstraction layer that allows programming with an object
 paradigm that is compatible with many languages. It is a part of Glib,
 the core library used to build GTK+ and GNOME.
 .
 This package contains the Python 2.x binding generator for libraries that
 support gobject-introspection, i. e. which ship a gir1.2-<name>-<version>
 package. With these packages, the libraries can be used from Python.
(...)
Bugs: https://bugs.launchpad.net/ubuntu/+filebug
Origin: Ubuntu

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#112 Le 10/04/2016, à 05:52

malbo

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

@moko138 : qu'est-ce qu'on est sensé comprendre à la lecture de ton post #112 ?

Hors ligne

#113 Le 10/04/2016, à 06:57

moko138

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

Pardon :  je me suis très mal exprimé.
Je veux dire :
- que python-gi est installé dans ma Precise et dans ma Trusty,
- que je ne me rappelle pas avoir installé python-gi,
- donc que je suppose qu'il est soit pré-installé dans ces deux LTS, soit que c'est l'installation de boot-repair (version Precise et Trusty) qui a entraîné l'installation de python-gi,


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#114 Le 10/04/2016, à 08:11

malbo

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

@moko138 : après lecture de ton dernier post, je me rends compte que c'est moi qui n'est pas été clair dans mon post #109 : j'aurais dû préciser en préambule que le paquet python-gi a toujours été installé "de base" dans toutes les versions précédentes de Ubuntu. Il était également présent dans la version en développement de Ubuntu 16.04 jusqu'à mi-mars 2016, date à laquelle il a disparu du fichier ISO, ce qui fait qu'une session live sur un support live réalisé à partir de cet ISO ne contient pas python-gi et qu'une installation faite à partir de cet ISO ne contient pas non plus python-gi

Dernière modification par malbo (Le 10/04/2016, à 08:14)

Hors ligne

#115 Le 10/04/2016, à 10:32

Babdu89

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

Bonjour.
Post#93 j'indique que le boot info fonctionne depuis une Cubuntu 16.04 .
Je viens de vérifier dans l'iso avec synaptic. Le paquet  python-gi y est.

@+.      Babdu89  .

Dernière modification par Babdu89 (Le 10/04/2016, à 10:34)


J'ai découvert Ubuntu avec la 07.10.... Et alors?!...  Depuis je regarde de temps en temps si Windows marche toujours....

Hors ligne

#116 Le 20/04/2016, à 16:28

Bougron

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

Bonjour
Encore un petit problème avec boot-info et le noyau 4.4.0.21
'utf-8' codec can't decode byte 0xe9 in position 6456; invalide continuation byte  => https://www.google.fr/search?as_q=&as_e … as_rights=
Je n'ai toujours pas la génération de l'URL mais le noyaux indique  certainement la cause que je ne sais pas comprendre. http://hpics.li/710c4ca

Je ne serais pas surpris que la cause soit les accents français
echo    'Chargement de Linux 3.13.0-74-generic
'

Dernière modification par Bougron (Le 20/04/2016, à 17:01)

Hors ligne

#117 Le 20/04/2016, à 16:38

Babdu89

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

Bonjour.
La xenial chez moi est en 4.4.0-18 .
Vais faire les maj et tester.

Édit.
Maj faites, suis en 4.4.0-21 . Je fais un boot info depuis le xénial installé.

Il n'y a pas de souci.

http://paste2.org/L2ULb4VE

@+.  Babdu89  .

Dernière modification par Babdu89 (Le 20/04/2016, à 17:10)


J'ai découvert Ubuntu avec la 07.10.... Et alors?!...  Depuis je regarde de temps en temps si Windows marche toujours....

Hors ligne

#118 Le 01/06/2016, à 08:26

marcus4213

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

Bonjour,
Je suis nouveaux sous Linux.
Mon ordinateur est un acer Extensa 2510 avec windows 8 et ubuntu 16.04 en dual boot.
Le demarrage ayant ralenti, j'ai installe boot-info qui preconise des reparations au niveau de la partition.
Lors de l'installation j'avais essaye plusieurs fois avec EFI, mais ubuntu ne demarait pas, avant de revenir au boot normal.
Voila le rapport: http://paste2.org/gKkd1mVP

Pourriez vous me conseiller?
Cordialement,
Marc

Hors ligne

#119 Le 01/06/2016, à 08:54

malbo

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

@marcus4213 : je trouve que ton post n'est pas clair. Je te conseille de créer une nouvelle discussion pour ton cas perso en suivant les indications du paragraphe 4.1 Initier une nouvelle discussion
Dans le premier post de cette nouvelle discussion, tu peux reprendre le contenu de ton post précédent mais si tu peux le relire avec un œil critique, j'espère que tu pourras le remanier un peu pour qu'il soit plus compréhensible.

Hors ligne

#120 Le 15/06/2016, à 22:39

YannUbuntu

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

bonjour
normalement le problème lié à python-gi dans xenial devrait etre résolu depuis quelques temps.
https://bugs.launchpad.net/boot-repair/+bug/1573302


à consulter/améliorer: Guide du Débutant, Logiciels, Ecole, Travail, Maison

Hors ligne

#121 Le 15/06/2016, à 22:47

moko138

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

Salut YannUbuntu !
Ça fait fait plaisir de te voir !


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#122 Le 27/06/2016, à 13:20

ccp2016si

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

Slt tout le monde
  j'ai besoin d'aide svp.
comment faire pour installer open VMPS sur virtualbox
merci d'avance

Hors ligne

#123 Le 27/06/2016, à 13:26

Bougron

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

ccp2016si a écrit :

Slt tout le monde
  j'ai besoin d'aide svp.
comment faire pour installer open VMPS sur virtualbox
merci d'avance

Bonjour ccp2016si.
Ouvres une nouvelle discussion.

Hors ligne

#124 Le 08/09/2016, à 11:57

navarre

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

Bonjour, j'ai ouvert un sujet car j'arrive bleu-bit, mais à la lecture de ce sujet, je vois que ça n'a plus rapport, peut-etre avec l'actualité...

Je dispose du cd d'installation de la version 16-04 LTS, et je suis au tout début de l'isntallation, je n'abouti pas d'ailleurs.
Je voudrais ajouter dans mon sujet des informations sur mon équipement, et je me demande si ce sujet est en rapport avec ma version ubuntu... donc je passe mon chemin, ou ça me concerne aussi ?
( et donc quoi faire? )
merci.


hébergeur d'image: http://pix.toile-libre.org/
Vostro 1000, windows XP pour jouer Com&Conq
Asus E406aM Celeron N4000 windows10, pour ssaché rasbperry et arduinoster

Hors ligne

#125 Le 16/09/2016, à 11:00

Bougron

Re : [TUTORIEL] Créer un rapport Boot-Info facilement

Bonjour.

A l'intention de M.    YannUbuntu

Serait-il possible d'ajouter une fonctionnalité dans les boot-info         qui listent des INFO EFI
J'aimerais que le contenu du fichier /boot/efi/EFI/ubuntu/grub.cfg
en effet, ce fichier de paramétrage  contient le N° de la partition contenant SLASH   et ce N° est fluctuant dans le temps.  Voir raison https://forum.ubuntu-fr.org/viewtopic.p … #p21591470

Hors ligne