#26 Le 14/05/2016, à 13:22
- moko138
Re : Allumage ordinateur très très long
Je te demande la même chose que ce que je te demandais en #2 et que tu avais fini par comprendre puisque tu me l'avais donné en #9.
Donc relis les explications entre #2 et #9.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#27 Le 14/05/2016, à 14:21
- phil01150
Re : Allumage ordinateur très très long
J'ai finis effectivement par comprendre...........
l'informatique ne fais partit de mes passions désolé.
(
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-59-generic (buildd@lgw01-58) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #65~14.04.1-Ubuntu SMP Tue Apr 19 18:57:09 UTC 2016 (Ubuntu 3.19.0-59.65~14.04.1-generic 3.19.8-ckt19)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-59-generic root=UUID=032282a0-0564-4289-89fd-8c7bf73761dc ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf8a0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf8a1000-0x00000000bf8a6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf8a7000-0x00000000bf9bcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf9bd000-0x00000000bfa0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfa0f000-0x00000000bfb07fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfb08000-0x00000000bfd0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfd0f000-0x00000000bfd17fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfd18000-0x00000000bfd1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfd1f000-0x00000000bfd64fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfd65000-0x00000000bfd9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfd9f000-0x00000000bfdfffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. R610 /R610 , BIOS 02LK.MP00.20080926.SCY 09/26/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0xbfd65 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BFE00000 mask FFFE00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3070MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 3070M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3070MB, range: 2MB, type UC
[ 0.000000] found SMP MP-table at [mem 0x000f7380-0x000f738f] mapped at [ffff8800000f7380]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[ 0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbf600000-0xbf7fffff]
[ 0.000000] [mem 0xbf600000-0xbf7fffff] page 2M
[ 0.000000] BRK [0x01fd8000, 0x01fd8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xa0000000-0xbf5fffff]
[ 0.000000] [mem 0xa0000000-0xbf5fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x80000000-0x9fffffff]
[ 0.000000] [mem 0x80000000-0x9fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0xbf800000-0xbf8a0fff]
[ 0.000000] [mem 0xbf800000-0xbf8a0fff] page 4k
[ 0.000000] BRK [0x01fd9000, 0x01fd9fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbf8a7000-0xbf9bcfff]
[ 0.000000] [mem 0xbf8a7000-0xbf9bcfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbfa0f000-0xbfb07fff]
[ 0.000000] [mem 0xbfa0f000-0xbfb07fff] page 4k
[ 0.000000] BRK [0x01fda000, 0x01fdafff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbfd0f000-0xbfd17fff]
[ 0.000000] [mem 0xbfd0f000-0xbfd17fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbfd1f000-0xbfd64fff]
[ 0.000000] [mem 0xbfd1f000-0xbfd64fff] page 4k
[ 0.000000] RAMDISK: [mem 0x35a1a000-0x36d04fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F72E0 000024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 0x00000000BFDF8657 00006C (v01 SECCSD LH43STAR 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFDE8000 0000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 0x00000000BFDE9000 006533 (v02 Intel CANTIGA 06040000 INTL 20050624)
[ 0.000000] ACPI: FACS 0x00000000BFD9EFC0 000040
[ 0.000000] ACPI: FACS 0x00000000BFD9EFC0 000040
[ 0.000000] ACPI: HPET 0x00000000BFDFED86 000038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 0x00000000BFDFEDBE 00003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 0x00000000BFDFEDFA 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000BFDFEE62 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 0x00000000BFDFEE8A 000176 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 0x00000000BFDE7000 0005F9 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x00000000BFDE6000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x00000000BFDE5000 00020F (v01 PmRef ApTst 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bfd64fff]
[ 0.000000] NODE_DATA(0) allocated [mem 0xbfd60000-0xbfd64fff]
[ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bbe00000-ffff8800bedfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xbfd64fff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf8a0fff]
[ 0.000000] node 0: [mem 0xbf8a7000-0xbf9bcfff]
[ 0.000000] node 0: [mem 0xbfa0f000-0xbfb07fff]
[ 0.000000] node 0: [mem 0xbfd0f000-0xbfd17fff]
[ 0.000000] node 0: [mem 0xbfd1f000-0xbfd64fff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0xbfd64fff]
[ 0.000000] On node 0 totalpages: 785052
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12214 pages used for memmap
[ 0.000000] DMA32 zone: 781055 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf8a1000-0xbf8a6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf9bd000-0xbfa0efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfb08000-0xbfd0efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfd18000-0xbfd1efff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff8800bf400000 s86144 r8192 d32640 u1048576
[ 0.000000] pcpu-alloc: s86144 r8192 d32640 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 772753
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-59-generic root=UUID=032282a0-0564-4289-89fd-8c7bf73761dc ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3054836K/3140208K available (7947K kernel code, 1174K rwdata, 3760K rodata, 1412K init, 1292K bss, 85372K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16640 nr_irqs:440 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-1.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1995.091 MHz processor
[ 0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.18 BogoMIPS (lpj=7980364)
[ 0.004017] pid_max: default: 32768 minimum: 301
[ 0.004025] ACPI: Core revision 20141107
[ 0.010570] ACPI: All ACPI Tables successfully acquired
[ 0.010601] Security Framework initialized
[ 0.010623] AppArmor: AppArmor initialized
[ 0.010625] Yama: becoming mindful.
[ 0.011082] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.013607] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.014985] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.015000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.015410] Initializing cgroup subsys memory
[ 0.015422] Initializing cgroup subsys devices
[ 0.015427] Initializing cgroup subsys freezer
[ 0.015432] Initializing cgroup subsys net_cls
[ 0.015436] Initializing cgroup subsys blkio
[ 0.015440] Initializing cgroup subsys perf_event
[ 0.015443] Initializing cgroup subsys net_prio
[ 0.015447] Initializing cgroup subsys hugetlb
[ 0.015477] CPU: Physical Processor ID: 0
[ 0.015479] CPU: Processor Core ID: 0
[ 0.015482] mce: CPU supports 6 MCE banks
[ 0.015491] CPU0: Thermal monitoring enabled (TM2)
[ 0.015496] process: using mwait in idle threads
[ 0.015502] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.015502] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.015618] Freeing SMP alternatives memory: 32K (ffffffff81e88000 - ffffffff81e90000)
[ 0.019862] ftrace: allocating 30050 entries in 118 pages
[ 0.032562] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073618] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T5800 @ 2.00GHz (fam: 06, model: 0f, stepping: 0d)
[ 0.076000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.076000] perf_event_intel: PEBS disabled due to CPU errata
[ 0.076000] ... version: 2
[ 0.076000] ... bit width: 40
[ 0.076000] ... generic registers: 2
[ 0.076000] ... value mask: 000000ffffffffff
[ 0.076000] ... max period: 000000007fffffff
[ 0.076000] ... fixed-purpose events: 3
[ 0.076000] ... event mask: 0000000700000003
[ 0.076000] x86: Booting SMP configuration:
[ 0.076000] .... node #0, CPUs: #1
[ 0.086577] x86: Booted up 1 node, 2 CPUs
[ 0.086582] smpboot: Total of 2 processors activated (7980.36 BogoMIPS)
[ 0.086629] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.088058] devtmpfs: initialized
[ 0.092283] evm: security.selinux
[ 0.092286] evm: security.SMACK64
[ 0.092287] evm: security.SMACK64EXEC
[ 0.092289] evm: security.SMACK64TRANSMUTE
[ 0.092290] evm: security.SMACK64MMAP
[ 0.092292] evm: security.ima
[ 0.092293] evm: security.capability
[ 0.092314] PM: Registering ACPI NVS region [mem 0xbfd65000-0xbfd9efff] (237568 bytes)
[ 0.092314] pinctrl core: initialized pinctrl subsystem
[ 0.092314] RTC time: 12:59:27, date: 05/14/16
[ 0.092316] NET: Registered protocol family 16
[ 0.096007] cpuidle: using governor ladder
[ 0.100006] cpuidle: using governor menu
[ 0.100063] ACPI: bus type PCI registered
[ 0.100066] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.100171] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.100174] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.100682] PCI: Using configuration type 1 for base access
[ 0.108138] ACPI: Added _OSI(Module Device)
[ 0.108141] ACPI: Added _OSI(Processor Device)
[ 0.108143] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.108145] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.115480] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.116946] ACPI: Dynamic OEM Table Load:
[ 0.116955] ACPI: SSDT 0xFFFF8800BB0D2800 000265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.117496] ACPI: Dynamic OEM Table Load:
[ 0.117506] ACPI: SSDT 0xFFFF8800BB1CA000 000C78 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.118434] ACPI: Dynamic OEM Table Load:
[ 0.118441] ACPI: SSDT 0xFFFF8800BB19F200 0001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.118914] ACPI: Dynamic OEM Table Load:
[ 0.118921] ACPI: SSDT 0xFFFF8800BB0C2A80 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.120116] ACPI: Interpreter enabled
[ 0.120116] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.120116] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.120116] ACPI: (supports S0 S3 S4 S5)
[ 0.120116] ACPI: Using IOAPIC for interrupt routing
[ 0.120123] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.120585] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.125436] ACPI: Power Resource [FN00] (off)
[ 0.125436] ACPI: Power Resource [FN01] (off)
[ 0.125436] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.125436] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.125436] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.125941] PCI host bridge to bus 0000:00
[ 0.125945] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.125948] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.125951] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.125956] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.125959] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.125961] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.125964] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[ 0.125976] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.128005] DMAR: Forcing write-buffer flush capability
[ 0.128007] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.128111] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
[ 0.128169] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.128218] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.128321] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.128384] pci 0000:00:1a.0: reg 0x20: [io 0x1800-0x181f]
[ 0.128540] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.128605] pci 0000:00:1a.1: reg 0x20: [io 0x1820-0x183f]
[ 0.128755] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.128819] pci 0000:00:1a.2: reg 0x20: [io 0x1840-0x185f]
[ 0.128984] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.129013] pci 0000:00:1a.7: reg 0x10: [mem 0xf6204800-0xf6204bff]
[ 0.129140] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.129260] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.129287] pci 0000:00:1b.0: reg 0x10: [mem 0xf6200000-0xf6203fff 64bit]
[ 0.129409] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.129464] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.129529] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.129658] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.129716] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.129785] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.129914] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.129975] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.130040] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.130168] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.130228] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.130298] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.130362] pci 0000:00:1d.0: reg 0x20: [io 0x1860-0x187f]
[ 0.130514] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.130578] pci 0000:00:1d.1: reg 0x20: [io 0x1880-0x189f]
[ 0.130730] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.130794] pci 0000:00:1d.2: reg 0x20: [io 0x18a0-0x18bf]
[ 0.130960] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.130989] pci 0000:00:1d.7: reg 0x10: [mem 0xf6204c00-0xf6204fff]
[ 0.131117] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.131232] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.131357] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.131424] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 0.131681] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.131713] pci 0000:00:1f.2: reg 0x10: [io 0x18f0-0x18f7]
[ 0.131726] pci 0000:00:1f.2: reg 0x14: [io 0x18e4-0x18e7]
[ 0.131739] pci 0000:00:1f.2: reg 0x18: [io 0x18e8-0x18ef]
[ 0.131751] pci 0000:00:1f.2: reg 0x1c: [io 0x18e0-0x18e3]
[ 0.131764] pci 0000:00:1f.2: reg 0x20: [io 0x18c0-0x18df]
[ 0.131777] pci 0000:00:1f.2: reg 0x24: [mem 0xf6204000-0xf62047ff]
[ 0.131859] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.131969] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.131993] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
[ 0.132033] pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f]
[ 0.132246] pci 0000:01:00.0: [10de:06e8] type 00 class 0x030000
[ 0.132277] pci 0000:01:00.0: reg 0x10: [mem 0xce000000-0xceffffff]
[ 0.132305] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.132326] pci 0000:01:00.0: reg 0x1c: [mem 0xcc000000-0xcdffffff 64bit]
[ 0.132341] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
[ 0.132356] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.140024] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.140029] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.140033] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
[ 0.140038] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.140171] pci 0000:02:00.0: [168c:001c] type 00 class 0x020000
[ 0.140208] pci 0000:02:00.0: reg 0x10: [mem 0xf3000000-0xf300ffff 64bit]
[ 0.140396] pci 0000:02:00.0: PME# supported from D3hot
[ 0.140441] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.140498] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.140511] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.140517] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.140522] pci 0000:00:1c.0: bridge window [mem 0xf3000000-0xf3ffffff]
[ 0.140531] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
[ 0.140646] acpiphp: Slot [1] registered
[ 0.140654] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.140659] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.140665] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf4ffffff]
[ 0.140673] pci 0000:00:1c.2: bridge window [mem 0xf1000000-0xf1ffffff 64bit pref]
[ 0.140959] pci 0000:06:00.0: [11ab:4363] type 00 class 0x020000
[ 0.141167] pci 0000:06:00.0: reg 0x10: [mem 0xf5000000-0xf5003fff 64bit]
[ 0.141266] pci 0000:06:00.0: reg 0x18: [io 0x5000-0x50ff]
[ 0.141628] pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.142236] pci 0000:06:00.0: supports D1 D2
[ 0.142239] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.142344] pci 0000:06:00.0: System wakeup disabled by ACPI
[ 0.142514] pci 0000:00:1c.3: PCI bridge to [bus 06-07]
[ 0.142520] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.142525] pci 0000:00:1c.3: bridge window [mem 0xf5000000-0xf5ffffff]
[ 0.142534] pci 0000:00:1c.3: bridge window [mem 0xf2000000-0xf2ffffff 64bit pref]
[ 0.142647] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
[ 0.142663] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.142665] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.142668] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.142670] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.142673] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.142675] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.140355] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[ 0.140418] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[ 0.140478] ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
[ 0.140537] ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
[ 0.140595] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
[ 0.140655] ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
[ 0.140713] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
[ 0.140771] ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
[ 0.144176] ACPI: Enabled 9 GPEs in block 00 to 3F
[ 0.144235] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.144243] ACPI : EC: 0 stale EC events cleared
[ 0.144243] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.144243] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.144243] vgaarb: loaded
[ 0.144243] vgaarb: bridge control possible 0000:01:00.0
[ 0.144360] SCSI subsystem initialized
[ 0.144405] libata version 3.00 loaded.
[ 0.144405] ACPI: bus type USB registered
[ 0.144405] usbcore: registered new interface driver usbfs
[ 0.144405] usbcore: registered new interface driver hub
[ 0.144405] usbcore: registered new device driver usb
[ 0.144405] PCI: Using ACPI for IRQ routing
[ 0.156773] PCI: pci_cache_line_size set to 64 bytes
[ 0.156901] e820: reserve RAM buffer [mem 0x0009e400-0x0009ffff]
[ 0.156903] e820: reserve RAM buffer [mem 0xbf8a1000-0xbfffffff]
[ 0.156905] e820: reserve RAM buffer [mem 0xbf9bd000-0xbfffffff]
[ 0.156908] e820: reserve RAM buffer [mem 0xbfb08000-0xbfffffff]
[ 0.156910] e820: reserve RAM buffer [mem 0xbfd18000-0xbfffffff]
[ 0.156912] e820: reserve RAM buffer [mem 0xbfd65000-0xbfffffff]
[ 0.157078] NetLabel: Initializing
[ 0.157080] NetLabel: domain hash size = 128
[ 0.157082] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.157101] NetLabel: unlabeled traffic allowed by default
[ 0.157132] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.157132] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.157132] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.158082] Switched to clocksource hpet
[ 0.166304] AppArmor: AppArmor Filesystem Enabled
[ 0.166421] pnp: PnP ACPI init
[ 0.166844] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.166851] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.166886] pnp 00:01: disabling [io 0x5000-0x500f] because it overlaps 0000:00:1c.3 BAR 13 [io 0x5000-0x5fff]
[ 0.166904] pnp 00:01: disabling [io 0x5000-0x500f disabled] because it overlaps 0000:06:00.0 BAR 2 [io 0x5000-0x50ff]
[ 0.166939] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.166942] system 00:01: [io 0x0480-0x048f] has been reserved
[ 0.166946] system 00:01: [io 0xffff] has been reserved
[ 0.166948] system 00:01: [io 0xffff] has been reserved
[ 0.166952] system 00:01: [io 0x0400-0x047f] could not be reserved
[ 0.166954] system 00:01: [io 0x0480-0x048f] has been reserved
[ 0.166957] system 00:01: [io 0x1180-0x11ff] has been reserved
[ 0.166960] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.166963] system 00:01: [io 0xfe00] has been reserved
[ 0.166967] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.167038] system 00:02: [io 0x06a0-0x06af] has been reserved
[ 0.167041] system 00:02: [io 0x06b0-0x06ff] has been reserved
[ 0.167045] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.167097] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.167140] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.167182] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.167365] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.167369] system 00:06: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.167372] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.167375] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.167378] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.167381] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.167384] system 00:06: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.167387] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.167390] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.167701] pnp: PnP ACPI: found 7 devices
[ 0.175366] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff 64bit]
[ 0.175382] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00020000 pref]
[ 0.175386] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
[ 0.175389] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.175392] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.175397] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
[ 0.175401] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.175407] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.175411] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.175418] pci 0000:00:1c.0: bridge window [mem 0xf3000000-0xf3ffffff]
[ 0.175424] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
[ 0.175432] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.175436] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.175443] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf4ffffff]
[ 0.175448] pci 0000:00:1c.2: bridge window [mem 0xf1000000-0xf1ffffff 64bit pref]
[ 0.175458] pci 0000:06:00.0: BAR 6: assigned [mem 0xf5020000-0xf503ffff pref]
[ 0.175461] pci 0000:00:1c.3: PCI bridge to [bus 06-07]
[ 0.175465] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.175472] pci 0000:00:1c.3: bridge window [mem 0xf5000000-0xf5ffffff]
[ 0.175477] pci 0000:00:1c.3: bridge window [mem 0xf2000000-0xf2ffffff 64bit pref]
[ 0.175486] pci 0000:00:1e.0: PCI bridge to [bus 08]
[ 0.175503] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.175505] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.175508] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.175510] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.175513] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.175515] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.175518] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.175520] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
[ 0.175523] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.175526] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.175528] pci_bus 0000:02: resource 1 [mem 0xf3000000-0xf3ffffff]
[ 0.175531] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf0ffffff 64bit pref]
[ 0.175533] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.175536] pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf4ffffff]
[ 0.175538] pci_bus 0000:04: resource 2 [mem 0xf1000000-0xf1ffffff 64bit pref]
[ 0.175541] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
[ 0.175543] pci_bus 0000:06: resource 1 [mem 0xf5000000-0xf5ffffff]
[ 0.175546] pci_bus 0000:06: resource 2 [mem 0xf2000000-0xf2ffffff 64bit pref]
[ 0.175549] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 0.175551] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 0.175554] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.175556] pci_bus 0000:08: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.175559] pci_bus 0000:08: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.175561] pci_bus 0000:08: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.175600] NET: Registered protocol family 2
[ 0.175851] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.176020] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.176217] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.176272] TCP: reno registered
[ 0.176283] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.176317] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.176397] NET: Registered protocol family 1
[ 0.177792] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.177829] PCI: CLS 64 bytes, default 64
[ 0.177908] Trying to unpack rootfs image as initramfs...
[ 0.601584] Freeing initrd memory: 19372K (ffff880035a1a000 - ffff880036d05000)
[ 0.601704] Simple Boot Flag at 0x37 set to 0x1
[ 0.601922] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3
[ 0.601929] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3
[ 0.602038] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.602080] Scanning for low memory corruption every 60 seconds
[ 0.602472] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.602498] Initialise system trusted keyring
[ 0.602528] audit: initializing netlink subsys (disabled)
[ 0.602560] audit: type=2000 audit(1463230767.600:1): initialized
[ 0.603041] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.605692] zpool: loaded
[ 0.605695] zbud: loaded
[ 0.605882] VFS: Disk quotas dquot_6.5.2
[ 0.605938] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.606708] fuse init (API version 7.23)
[ 0.606922] Key type big_key registered
[ 0.607416] Key type asymmetric registered
[ 0.607420] Asymmetric key parser 'x509' registered
[ 0.607477] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.607521] io scheduler noop registered
[ 0.607525] io scheduler deadline registered (default)
[ 0.607575] io scheduler cfq registered
[ 0.608496] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.608520] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.608576] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.608578] vesafb: scrolling: redraw
[ 0.608580] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.609594] vesafb: framebuffer at 0xcd000000, mapped to 0xffffc90010780000, using 1216k, total 1216k
[ 0.609742] Console: switching to colour frame buffer device 80x30
[ 0.609757] fb0: VESA VGA frame buffer device
[ 0.609794] intel_idle: does not run on family 6 model 15
[ 0.610242] ACPI: AC Adapter [ADP1] (on-line)
[ 0.610370] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.610488] ACPI: Lid Switch [LID0]
[ 0.610552] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.610557] ACPI: Power Button [PWRB]
[ 0.610654] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.610658] ACPI: Sleep Button [SLPB]
[ 0.610724] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.610727] ACPI: Power Button [PWRF]
[ 0.612337] Monitor-Mwait will be used to enter C-1 state
[ 0.612344] Monitor-Mwait will be used to enter C-2 state
[ 0.612348] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.612353] ACPI: acpi_idle registered with cpuidle
[ 0.614176] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.614181] ACPI: Thermal Zone [TZ00] (76 C)
[ 0.615000] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.615004] ACPI: Thermal Zone [TZ01] (76 C)
[ 0.615078] GHES: HEST is not enabled!
[ 0.615321] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.618823] ACPI: Battery Slot [BAT1] (battery present)
[ 0.619083] Linux agpgart interface v0.103
[ 0.621324] brd: module loaded
[ 0.622393] loop: module loaded
[ 0.622692] libphy: Fixed MDIO Bus: probed
[ 0.622696] tun: Universal TUN/TAP device driver, 1.6
[ 0.622698] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.622763] PPP generic driver version 2.4.2
[ 0.622877] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.622883] ehci-pci: EHCI PCI platform driver
[ 0.623024] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.623033] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.623050] ehci-pci 0000:00:1a.7: debug port 1
[ 0.626957] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.626980] ehci-pci 0000:00:1a.7: irq 19, io mem 0xf6204800
[ 0.640034] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.640122] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.640128] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.640132] usb usb1: Product: EHCI Host Controller
[ 0.640137] usb usb1: Manufacturer: Linux 3.19.0-59-generic ehci_hcd
[ 0.640141] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.640330] hub 1-0:1.0: USB hub found
[ 0.640340] hub 1-0:1.0: 6 ports detected
[ 0.640655] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.640662] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.640678] ehci-pci 0000:00:1d.7: debug port 1
[ 0.644597] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.644614] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf6204c00
[ 0.656041] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.656115] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.656120] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.656125] usb usb2: Product: EHCI Host Controller
[ 0.656129] usb usb2: Manufacturer: Linux 3.19.0-59-generic ehci_hcd
[ 0.656133] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.656309] hub 2-0:1.0: USB hub found
[ 0.656319] hub 2-0:1.0: 6 ports detected
[ 0.656532] ehci-platform: EHCI generic platform driver
[ 0.656549] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.656555] ohci-pci: OHCI PCI platform driver
[ 0.656572] ohci-platform: OHCI generic platform driver
[ 0.656585] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.656691] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.656699] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.656707] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.656742] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 0.656801] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.656804] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.656807] usb usb3: Product: UHCI Host Controller
[ 0.656809] usb usb3: Manufacturer: Linux 3.19.0-59-generic uhci_hcd
[ 0.656812] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.656965] hub 3-0:1.0: USB hub found
[ 0.656973] hub 3-0:1.0: 2 ports detected
[ 0.657186] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.657194] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.657203] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.657237] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 0.657294] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.657297] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.657299] usb usb4: Product: UHCI Host Controller
[ 0.657302] usb usb4: Manufacturer: Linux 3.19.0-59-generic uhci_hcd
[ 0.657304] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.657452] hub 4-0:1.0: USB hub found
[ 0.657463] hub 4-0:1.0: 2 ports detected
[ 0.657671] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.657678] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.657686] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.657709] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
[ 0.657764] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.657767] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.657770] usb usb5: Product: UHCI Host Controller
[ 0.657772] usb usb5: Manufacturer: Linux 3.19.0-59-generic uhci_hcd
[ 0.657775] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.657922] hub 5-0:1.0: USB hub found
[ 0.657930] hub 5-0:1.0: 2 ports detected
[ 0.658139] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.658146] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.658155] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.658179] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 0.658242] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.658246] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.658248] usb usb6: Product: UHCI Host Controller
[ 0.658251] usb usb6: Manufacturer: Linux 3.19.0-59-generic uhci_hcd
[ 0.658253] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.658408] hub 6-0:1.0: USB hub found
[ 0.658417] hub 6-0:1.0: 2 ports detected
[ 0.658626] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.658633] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.658642] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.658664] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 0.658722] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.658725] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.658728] usb usb7: Product: UHCI Host Controller
[ 0.658730] usb usb7: Manufacturer: Linux 3.19.0-59-generic uhci_hcd
[ 0.658733] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.658881] hub 7-0:1.0: USB hub found
[ 0.658889] hub 7-0:1.0: 2 ports detected
[ 0.659095] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.659102] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.659111] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.659145] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 0.659204] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.659207] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.659209] usb usb8: Product: UHCI Host Controller
[ 0.659212] usb usb8: Manufacturer: Linux 3.19.0-59-generic uhci_hcd
[ 0.659214] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.659363] hub 8-0:1.0: USB hub found
[ 0.659372] hub 8-0:1.0: 2 ports detected
[ 0.659556] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.661837] i8042: Detected active multiplexing controller, rev 1.1
[ 0.663068] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.663073] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.663115] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.663150] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.663186] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.663380] mousedev: PS/2 mouse device common for all mice
[ 0.663891] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.663926] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.663938] i2c /dev entries driver
[ 0.664066] device-mapper: uevent: version 1.0.3
[ 0.664177] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[ 0.664201] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.664420] PCCT header not found.
[ 0.664546] TCP: cubic registered
[ 0.664716] NET: Registered protocol family 10
[ 0.665014] NET: Registered protocol family 17
[ 0.665030] Key type dns_resolver registered
[ 0.665453] Loading compiled-in X.509 certificates
[ 0.666801] Loaded X.509 cert 'Magrathea: Glacier signing key: 3b8088d8e6b93ead6e77b03c9c4e5cbafb1a0b20'
[ 0.666826] registered taskstats version 1
[ 0.669414] Key type trusted registered
[ 0.673788] Key type encrypted registered
[ 0.673797] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.673802] ima: No TPM chip found, activating TPM-bypass!
[ 0.673830] evm: HMAC attrs: 0x1
[ 0.674444] Magic number: 0:759:986
[ 0.674586] rtc_cmos 00:03: setting system clock to 2016-05-14 12:59:28 UTC (1463230768)
[ 0.675168] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.675170] EDD information not available.
[ 0.675306] PM: Hibernation image not present or could not be loaded.
[ 0.675922] Freeing unused kernel memory: 1412K (ffffffff81d27000 - ffffffff81e88000)
[ 0.675924] Write protecting the kernel read-only data: 12288k
[ 0.676276] Freeing unused kernel memory: 232K (ffff8800017c6000 - ffff880001800000)
[ 0.676493] Freeing unused kernel memory: 336K (ffff880001bac000 - ffff880001c00000)
[ 0.688181] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.691819] systemd-udevd[104]: starting version 204
[ 0.791645] sky2: driver version 1.30
[ 0.791916] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
[ 0.792931] sky2 0000:06:00.0 eth0: addr 00:13:77:d3:19:e7
[ 0.798718] ahci 0000:00:1f.2: version 3.0
[ 0.798955] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.798994] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.798999] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 0.825336] scsi host0: ahci
[ 0.828879] scsi host1: ahci
[ 0.829277] scsi host2: ahci
[ 0.831593] scsi host3: ahci
[ 0.834142] scsi host4: ahci
[ 0.836773] scsi host5: ahci
[ 0.836875] ata1: SATA max UDMA/133 abar m2048@0xf6204000 port 0xf6204100 irq 29
[ 0.836880] ata2: SATA max UDMA/133 abar m2048@0xf6204000 port 0xf6204180 irq 29
[ 0.836882] ata3: DUMMY
[ 0.836884] ata4: DUMMY
[ 0.836887] ata5: SATA max UDMA/133 abar m2048@0xf6204000 port 0xf6204300 irq 29
[ 0.836891] ata6: SATA max UDMA/133 abar m2048@0xf6204000 port 0xf6204380 irq 29
[ 0.952041] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 1.130672] usb 1-3: New USB device found, idVendor=0ac8, idProduct=c302
[ 1.130678] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.130683] usb 1-3: Product: Vega USB 2.0 Camera.
[ 1.130687] usb 1-3: Manufacturer: Vimicro Corp.
[ 1.164042] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.165630] ata1.00: supports DRM functions and may not be fully accessible
[ 1.165804] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.165809] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
[ 1.165813] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.166292] ata1.00: supports DRM functions and may not be fully accessible
[ 1.166410] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.166542] ata1.00: configured for UDMA/133
[ 1.166746] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
[ 1.167067] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.167087] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.167157] sd 0:0:0:0: [sda] Write Protect is off
[ 1.167160] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.167182] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.167841] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.168431] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.484299] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.484722] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, SC05, max UDMA/100
[ 1.484728] ata2.00: applying bridge limits
[ 1.485722] ata2.00: configured for UDMA/100
[ 1.488870] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A SC05 PQ: 0 ANSI: 5
[ 1.508241] sr 1:0:0:0: [sr0] scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.508247] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.508456] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.508542] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.562861] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa00000/0x0, board id: 0, fw id: 437321
[ 1.599822] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
[ 1.828045] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.148047] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.202793] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 2.325264] random: init urandom read with 37 bits of entropy available
[ 2.358460] init: plymouth-upstart-bridge main process (178) terminated with status 1
[ 2.358477] init: plymouth-upstart-bridge main process ended, respawning
[ 2.368868] init: plymouth-upstart-bridge main process (188) terminated with status 1
[ 2.368893] init: plymouth-upstart-bridge main process ended, respawning
[ 2.378574] init: plymouth-upstart-bridge main process (191) terminated with status 1
[ 2.378601] init: plymouth-upstart-bridge main process ended, respawning
[ 2.539269] Adding 3139580k swap on /dev/sda5. Priority:-1 extents:1 across:3139580k SSFS
[ 2.763024] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 2.782706] systemd-udevd[321]: starting version 204
[ 2.882291] lp: driver loaded but no devices found
[ 2.903436] cfg80211: Calling CRDA to update world regulatory domain
[ 2.931878] ath5k 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.932057] ath5k 0000:02:00.0: registered as 'phy0'
[ 2.970380] random: nonblocking pool is initialized
[ 3.374101] Bluetooth: Core ver 2.20
[ 3.374350] NET: Registered protocol family 31
[ 3.374353] Bluetooth: HCI device and connection manager initialized
[ 3.374359] Bluetooth: HCI socket layer initialized
[ 3.374363] Bluetooth: L2CAP socket layer initialized
[ 3.374378] Bluetooth: SCO socket layer initialized
[ 3.400112] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.400117] Bluetooth: BNEP filters: protocol multicast
[ 3.400124] Bluetooth: BNEP socket layer initialized
[ 3.427931] Bluetooth: RFCOMM TTY layer initialized
[ 3.427941] Bluetooth: RFCOMM socket layer initialized
[ 3.427949] Bluetooth: RFCOMM ver 1.11
[ 3.489874] audit: type=1400 audit(1463223571.310:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=483 comm="apparmor_parser"
[ 3.489889] audit: type=1400 audit(1463223571.310:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=483 comm="apparmor_parser"
[ 3.490699] audit: type=1400 audit(1463223571.310:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=483 comm="apparmor_parser"
[ 3.546205] init: cups main process (491) killed by HUP signal
[ 3.546221] init: cups main process ended, respawning
[ 3.586184] media: Linux media interface: v0.10
[ 3.597464] Linux video capture interface: v2.00
[ 3.621566] uvcvideo: Found UVC 1.00 device Vega USB 2.0 Camera. (0ac8:c302)
[ 3.626958] input: Vega USB 2.0 Camera. as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input13
[ 3.627058] usbcore: registered new interface driver uvcvideo
[ 3.627060] USB Video Class driver (1.1.1)
[ 3.803292] ath: EEPROM regdomain: 0x65
[ 3.803297] ath: EEPROM indicates we should expect a direct regpair map
[ 3.803302] ath: Country alpha2 being used: 00
[ 3.803303] ath: Regpair used: 0x65
[ 3.822770] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 3.823127] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 3.823730] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.830105] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20141107/utaddress-258)
[ 3.830115] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.830120] ACPI Warning: SystemIO range 0x00000000000011b0-0x00000000000011bf conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\GPIO) (20141107/utaddress-258)
[ 3.830125] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.830127] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\GPIO) (20141107/utaddress-258)
[ 3.830131] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.830133] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.838673] ppdev: user-space parallel port driver
[ 3.881651] [drm] Initialized drm 1.1.0 20060810
[ 3.890015] audit: type=1400 audit(1463223571.710:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=547 comm="apparmor_parser"
[ 3.890026] audit: type=1400 audit(1463223571.710:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=547 comm="apparmor_parser"
[ 3.890032] audit: type=1400 audit(1463223571.710:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=547 comm="apparmor_parser"
[ 3.893446] audit: type=1400 audit(1463223571.714:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=547 comm="apparmor_parser"
[ 3.893460] audit: type=1400 audit(1463223571.714:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=547 comm="apparmor_parser"
[ 3.893760] audit: type=1400 audit(1463223571.714:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=547 comm="apparmor_parser"
[ 4.061463] cfg80211: World regulatory domain updated:
[ 4.061469] cfg80211: DFS Master region: unset
[ 4.061471] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.061475] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4.061478] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4.061481] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4.061484] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4.061486] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4.074691] ACPI: Video Device [NVID] (multi-head: yes rom: no post: no)
[ 4.074763] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 4.075818] acpi device:02: registered as cooling_device4
[ 4.075987] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input14
[ 4.099669] samsung_laptop: detected SABI interface: SwSmi@
[ 4.099674] samsung_laptop: Backlight controlled by ACPI video driver
[ 4.106669] wmi: Mapper loaded
[ 4.144878] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 4.144884] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.144888] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 4.144890] sound hdaudioC0D0: mono: mono_out=0x0
[ 4.144892] sound hdaudioC0D0: inputs:
[ 4.144895] sound hdaudioC0D0: Internal Mic=0x19
[ 4.144898] sound hdaudioC0D0: Mic=0x18
[ 4.199189] checking generic (cd000000 130000) vs hw (d0000000 10000000)
[ 4.199194] checking generic (cd000000 130000) vs hw (cc000000 2000000)
[ 4.199197] fb: switching to nouveaufb from VESA VGA
[ 4.199285] Console: switching to colour dummy device 80x25
[ 4.210411] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 4.211121] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 4.211292] input: HDA Intel HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 4.216594] init: failsafe main process (594) killed by TERM signal
[ 4.259991] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x298400a2
[ 4.259996] nouveau [ DEVICE][0000:01:00.0] Chipset: G98 (NV98)
[ 4.260040] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 4.294440] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 4.294595] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 4.294600] nouveau [ VBIOS][0000:01:00.0] version 62.98.3c.00.00
[ 4.328582] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 4.328628] nouveau W[ VBIOS][0000:01:00.0] M0203T not found
[ 4.328631] nouveau W[ VBIOS][0000:01:00.0] M0203E not matched!
[ 4.328657] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
[ 4.328659] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 4.328662] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
[ 4.334818] nouveau [ VOLT][0000:01:00.0] GPU voltage: 900000uv
[ 4.442919] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 4.442948] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 4.442960] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 4.464515] nouveau [ CLK][0000:01:00.0] 03: core 169 MHz shader 338 MHz memory 100 MHz
[ 4.464523] nouveau [ CLK][0000:01:00.0] 05: core 275 MHz shader 550 MHz memory 250 MHz
[ 4.464527] nouveau [ CLK][0000:01:00.0] 07: core 500 MHz shader 1000 MHz memory 410 MHz
[ 4.464531] nouveau [ CLK][0000:01:00.0] 0f: core 529 MHz shader 1300 MHz memory 410 MHz
[ 4.464628] nouveau [ CLK][0000:01:00.0] --: core 275 MHz shader 550 MHz memory 249 MHz
[ 4.467495] [TTM] Zone kernel: Available graphics memory: 1538110 kiB
[ 4.467499] [TTM] Initializing pool allocator
[ 4.467531] [TTM] Initializing DMA pool allocator
[ 4.467549] nouveau [ DRM] VRAM: 512 MiB
[ 4.467552] nouveau [ DRM] GART: 1048576 MiB
[ 4.467557] nouveau [ DRM] TMDS table version 2.0
[ 4.467560] nouveau [ DRM] DCB version 4.0
[ 4.467563] nouveau [ DRM] DCB outp 00: 01011323 00010034
[ 4.467566] nouveau [ DRM] DCB outp 01: 02000300 00000028
[ 4.467569] nouveau [ DRM] DCB outp 02: 04022332 00020010
[ 4.467571] nouveau [ DRM] DCB conn 00: 00000000
[ 4.467574] nouveau [ DRM] DCB conn 01: 00000140
[ 4.467576] nouveau [ DRM] DCB conn 02: 00001261
[ 4.486644] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.486649] [drm] Driver supports precise vblank timestamp query.
[ 4.513965] nouveau [ DRM] MM: using M2MF for buffer copies
[ 4.541572] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4.593094] sky2 0000:06:00.0 eth0: enabling interface
[ 4.593779] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.619438] nouveau [ DRM] allocated 1366x768 fb: 0x70000, bo ffff8800b8011000
[ 5.619688] fbcon: nouveaufb (fb0) is primary device
[ 5.619777] Console: switching to colour frame buffer device 170x48
[ 5.619814] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 5.619817] nouveau 0000:01:00.0: registered panic notifier
[ 5.644117] [drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 0
[ 6.420512] wlan0: authenticate with 00:1d:6a:1c:72:bd
[ 6.429135] wlan0: send auth to 00:1d:6a:1c:72:bd (try 1/3)
[ 6.431401] wlan0: authenticated
[ 6.432037] wlan0: associate with 00:1d:6a:1c:72:bd (try 1/3)
[ 6.435950] wlan0: RX AssocResp from 00:1d:6a:1c:72:bd (capab=0x431 status=0 aid=5)
[ 6.436133] wlan0: associated
[ 6.436253] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6.436297] cfg80211: Calling CRDA for country: FR
[ 6.439113] ath: EEPROM regdomain: 0x80fa
[ 6.439118] ath: EEPROM indicates we should expect a country code
[ 6.439120] ath: doing EEPROM country->regdmn map search
[ 6.439122] ath: country maps to regdmn code: 0x37
[ 6.439124] ath: Country alpha2 being used: FR
[ 6.439125] ath: Regpair used: 0x37
[ 6.439127] ath: regdomain 0x80fa dynamically updated by country IE
[ 6.439131] cfg80211: Regulatory domain changed to country: FR
[ 6.439133] cfg80211: DFS Master region: unset
[ 6.439135] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6.439138] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.439141] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.439143] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 6.439146] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[ 6.439148] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 6.479610] wlan0: deauthenticating from 00:1d:6a:1c:72:bd by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[ 6.596782] wlan0: authenticate with 00:1d:6a:1c:72:bd
[ 6.601052] wlan0: send auth to 00:1d:6a:1c:72:bd (try 1/3)
[ 6.601131] cfg80211: Calling CRDA to update world regulatory domain
[ 6.603912] cfg80211: World regulatory domain updated:
[ 6.603917] cfg80211: DFS Master region: unset
[ 6.603919] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6.603923] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6.603926] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6.603928] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6.603931] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6.603934] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6.604669] wlan0: authenticated
[ 6.608068] wlan0: associate with 00:1d:6a:1c:72:bd (try 1/3)
[ 6.611433] wlan0: RX AssocResp from 00:1d:6a:1c:72:bd (capab=0x431 status=0 aid=5)
[ 6.611539] wlan0: associated
[ 6.611583] cfg80211: Calling CRDA for country: FR
[ 6.614273] ath: EEPROM regdomain: 0x80fa
[ 6.614277] ath: EEPROM indicates we should expect a country code
[ 6.614279] ath: doing EEPROM country->regdmn map search
[ 6.614281] ath: country maps to regdmn code: 0x37
[ 6.614283] ath: Country alpha2 being used: FR
[ 6.614284] ath: Regpair used: 0x37
[ 6.614286] ath: regdomain 0x80fa dynamically updated by country IE
[ 6.614291] cfg80211: Regulatory domain changed to country: FR
[ 6.614292] cfg80211: DFS Master region: unset
[ 6.614294] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6.614297] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.614300] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.614303] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 6.614305] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[ 6.614308] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 6.693890] init: plymouth-upstart-bridge main process ended, respawning
[ 6.708398] init: plymouth-upstart-bridge main process ended, respawning
[ 27.411281] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
[ 27.411932] CPU1: Core temperature/speed normal
[ 31.336064] ath5k: ath5k_hw_get_isr: ISR: 0x00000001 IMR: 0x00000000
[ 33.725852] audit_printk_skb: 153 callbacks suppressed
[ 33.725859] audit: type=1400 audit(1463223600.763:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2278 comm="apparmor_parser"
[ 33.725874] audit: type=1400 audit(1463223600.763:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2278 comm="apparmor_parser"
[ 33.726786] audit: type=1400 audit(1463223600.763:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2278 comm="apparmor_parser")
Hors ligne
#28 Le 14/05/2016, à 14:49
- moko138
Re : Allumage ordinateur très très long
1) Si je comprends bien, ton démarrage est descendu à 33" (à partir du lancement du noyau, soit environ 45" en tout)
et tu as gagné 735- 33 = 10'42" !
Confirmes-tu?
2) Comment faut-il comprendre la ")" qui finit ton message?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#29 Le 14/05/2016, à 14:52
- phil01150
Re : Allumage ordinateur très très long
oui je confirme la baisse .
) c'est juste une erreur de frappe de la balise code
Hors ligne
#30 Le 14/05/2016, à 16:29
- moko138
Re : Allumage ordinateur très très long
Bon, ben c'est une bonne nouvelle, non?
Même si ça reste long pour un SSD.
L'explication est à chercher, je suppose, de ce côté-ci:
[ 1.166542] ata1.00: configured for UDMA/133Mais on va déjà attendre quelques jours pour voir si le démarrage se maintient en moins de 45 secondes.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#31 Le 24/05/2016, à 10:43
- phil01150
Re : Allumage ordinateur très très long
Je reviens sur ce problème après quelques jours.
Donc finalement l'allumage est toujours en 20 minutes environ.
rien finalement de mieux.
Hors ligne
#32 Le 24/05/2016, à 21:47
- moko138
Re : Allumage ordinateur très très long
On a donc un dysfonctionnement aléatoire : ta machine démarre tantôt en 45 secondes tantôt en 20 minutes.
Bizarre.
Mais donc ce n'est pas une affaire de réglage.
Examinons le disque ; peux-tu donner
sudo lsblk -o name,fstype,size,mountpoint,label,uuidet
sudo smartctl -a -s on /dev/sdas'il te plaît ?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#33 Le 01/06/2016, à 18:24
- phil01150
Re : Allumage ordinateur très très long
Bonjour,
Comme je suis souvent en déplacement c'est compliqué désolé
stefetphil@stefetphil:~$ sudo lsblk -o name,fstype,size,mountpoint,label,uuid
[sudo] password for stefetphil:
NAME FSTYPE SIZE MOUNTPOINT LABEL UUID
sda 232,9G
├─sda1 ntfs 10G RECOVERY 01D14882125C6B10
├─sda2 ntfs 69,1G 01D1488F5EFC95F0
├─sda3 ntfs 88,6G 01D14897783B9F90
├─sda4 1K
├─sda5 swap 3G [SWAP] 64580575-68c7-4320-8df0-b5cfdb8ea8de
└─sda6 ext4 62,2G / 032282a0-0564-4289-89fd-8c7bf73761dc
sr0 1024M
stefetphil@stefetphil:~$ stefetphil@stefetphil:~$ sudo smartctl -a -s on /dev/sda
sudo: smartctl: command not found
stefetphil@stefetphil:~$ Hors ligne
#34 Le 01/06/2016, à 18:32
- Bougron
Re : Allumage ordinateur très très long
Bonjour.
ll faut que tu installes l'application GSMARTCONTROL qui est dans la logithèque....
puis tu pourras refaire la commande.
Dernière modification par Bougron (Le 01/06/2016, à 19:37)
Hors ligne
#35 Le 01/06/2016, à 19:26
- phil01150
Re : Allumage ordinateur très très long
ok donc voila ce que ça donne
stefetphil@stefetphil:~$ sudo smartctl -a -s on /dev/sda
sudo: smartctl: command not found
stefetphil@stefetphil:~$ sudo smartctl -a -s on /dev/sda
[sudo] password for stefetphil:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.19.0-59-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Samsung SSD 850 EVO 250GB
Serial Number: S21PNXBG987141B
LU WWN Device Id: 5 002538 d4055e2bd
Firmware Version: EMT01B6Q
User Capacity: 250 059 350 016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Jun 1 19:23:59 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 133) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 364
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 123
177 Wear_Leveling_Count 0x0013 099 099 000 Pre-fail Always - 2
179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0
181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 058 051 000 Old_age Always - 42
195 Hardware_ECC_Recovered 0x001a 200 200 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
235 Unknown_Attribute 0x0012 099 099 000 Old_age Always - 13
241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 1227203460
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
stefetphil@stefetphil:~$ Hors ligne
#36 Le 01/06/2016, à 19:52
- Bougron
Re : Allumage ordinateur très très long
Je ne voudrais pas mal interpréter cette valeur ( 177 Wear_Leveling_Count )
https://www.reddit.com/r/linux/comments … ing_count/
http://superuser.com/questions/1037644/ … nt-meaning
https://sourceforge.net/p/smartmontools … /33625198/
http://www.linuxquestions.org/questions … ost5298481
et j'interprète la valeur 2 comme comme très bonne.
Dernière modification par Bougron (Le 01/06/2016, à 19:53)
Hors ligne