Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 06/06/2016, à 11:03

guylapi

geForce 7500LE problème affichage (vidéos hachées, lignes parasites,..

suite à un problème avec ma carte graphique de la carte mère, j'ai acquis une carte Ge Force LE.
j'ai vite remarqué quelques problèmes sous kubuntu (16.04 LTS)
comme je suis en dual boot, windows 10, (honte à moi) j'ai donc regardé les mêmes vidéo et film; sous wndows, aucun problème, pas d'image hachée, vue en plein écran fluide.
je reviens donc vers vous pour que vous m'aidiez à continuer à utiliser kubuntu.
je tiens aussi à dire que j'ai désactivé tous les "effets de bureau" car avant cela, un barre diagonale masquait l'écran.
merci d'avance

infos utiles :

spci | grep "VGA compatible controller"
01:00.0 VGA compatible controller: NVIDIA Corporation G72 [GeForce 7500 LE] (rev a1)

sudo lshw -enable pci -class display
[sudo] Mot de passe de guylapi : 
  *-display               
       description: VGA compatible controller
       produit: G72 [GeForce 7500 LE]
       fabriquant: NVIDIA Corporation
       identifiant matériel: 0
       information bus: pci@0000:01:00.0
       version: a1
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom
       configuration: driver=nouveau latency=0
       ressources: irq:26 mémoire:d1000000-d1ffffff mémoire:c0000000-cfffffff mémoire:d0000000-d0ffffff mémoire:d2000000-d201ffff


voici le contenu de /var/log/Xorg.0.log

[    31.282] (--) Log file renamed from "/var/log/Xorg.pid-929.log" to "/var/log/Xorg.0.log"
[    31.282] 
X.Org X Server 1.18.3
Release Date: 2016-04-04
[    31.282] X Protocol Version 11, Revision 0
[    31.282] Build Operating System: Linux 3.13.0-86-generic x86_64 Ubuntu
[    31.282] Current Operating System: Linux Guylapi-ordi 4.4.0-22-generic #40-Ubuntu SMP Thu May 12 22:03:46 UTC 2016 x86_64
[    31.282] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic root=UUID=31bf5943-2376-44a6-9040-119e4bd7d19a ro quiet splash vt.handoff=7
[    31.282] Build Date: 18 May 2016  01:07:07AM
[    31.282] xorg-server 2:1.18.3-1ubuntu2.2 (For technical support please see [url]http://www.ubuntu.com/support)[/url] 
[    31.282] Current version of pixman: 0.33.6
[    31.282] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[    31.282] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    31.282] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun  6 10:52:41 2016
[    31.303] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    31.303] (==) No Layout section.  Using the first Screen section.
[    31.303] (==) No screen section available. Using defaults.
[    31.303] (**) |-->Screen "Default Screen Section" (0)
[    31.303] (**) |   |-->Monitor "<default monitor>"
[    31.304] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    31.304] (==) Automatically adding devices
[    31.304] (==) Automatically enabling devices
[    31.304] (==) Automatically adding GPU devices
[    31.304] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    31.304] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    31.304] 	Entry deleted from font path.
[    31.304] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    31.304] 	Entry deleted from font path.
[    31.304] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    31.304] 	Entry deleted from font path.
[    31.304] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    31.304] 	Entry deleted from font path.
[    31.304] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    31.304] 	Entry deleted from font path.
[    31.304] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    31.304] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    31.304] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    31.304] (II) Loader magic: 0x55774e929da0
[    31.304] (II) Module ABI versions:
[    31.304] 	X.Org ANSI C Emulation: 0.4
[    31.304] 	X.Org Video Driver: 20.0
[    31.304] 	X.Org XInput driver : 22.1
[    31.304] 	X.Org Server Extension : 9.0
[    31.304] (++) using VT number 7

[    31.304] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    31.305] (II) xfree86: Adding drm device (/dev/dri/card0)
[    31.306] (--) PCI:*(0:1:0:0) 10de:01dd:0000:0000 rev 161, Mem @ 0xd1000000/16777216, 0xc0000000/268435456, 0xd0000000/16777216, BIOS @ 0x????????/131072
[    31.306] (II) LoadModule: "glx"
[    31.315] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    31.485] (II) Module glx: vendor="X.Org Foundation"
[    31.485] 	compiled for 1.18.3, module version = 1.0.0
[    31.485] 	ABI class: X.Org Server Extension, version 9.0
[    31.485] (==) AIGLX enabled
[    31.485] (==) Matched nvidia as autoconfigured driver 0
[    31.485] (==) Matched nouveau as autoconfigured driver 1
[    31.485] (==) Matched nvidia as autoconfigured driver 2
[    31.485] (==) Matched nouveau as autoconfigured driver 3
[    31.485] (==) Matched modesetting as autoconfigured driver 4
[    31.485] (==) Matched fbdev as autoconfigured driver 5
[    31.485] (==) Matched vesa as autoconfigured driver 6
[    31.485] (==) Assigned the driver to the xf86ConfigLayout
[    31.485] (II) LoadModule: "nvidia"
[    31.486] (WW) Warning, couldn't open module nvidia
[    31.486] (II) UnloadModule: "nvidia"
[    31.486] (II) Unloading nvidia
[    31.486] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    31.486] (II) LoadModule: "nouveau"
[    31.486] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    31.521] (II) Module nouveau: vendor="X.Org Foundation"
[    31.521] 	compiled for 1.18.1, module version = 1.0.12
[    31.521] 	Module class: X.Org Video Driver
[    31.521] 	ABI class: X.Org Video Driver, version 20.0
[    31.521] (II) LoadModule: "modesetting"
[    31.521] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    31.521] (II) Module modesetting: vendor="X.Org Foundation"
[    31.521] 	compiled for 1.18.3, module version = 1.18.3
[    31.521] 	Module class: X.Org Video Driver
[    31.521] 	ABI class: X.Org Video Driver, version 20.0
[    31.521] (II) LoadModule: "fbdev"
[    31.521] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    31.521] (II) Module fbdev: vendor="X.Org Foundation"
[    31.521] 	compiled for 1.18.1, module version = 0.4.4
[    31.521] 	Module class: X.Org Video Driver
[    31.521] 	ABI class: X.Org Video Driver, version 20.0
[    31.521] (II) LoadModule: "vesa"
[    31.521] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    31.521] (II) Module vesa: vendor="X.Org Foundation"
[    31.521] 	compiled for 1.18.1, module version = 2.3.4
[    31.521] 	Module class: X.Org Video Driver
[    31.521] 	ABI class: X.Org Video Driver, version 20.0
[    31.521] (==) Matched nvidia as autoconfigured driver 0
[    31.521] (==) Matched nouveau as autoconfigured driver 1
[    31.521] (==) Matched nvidia as autoconfigured driver 2
[    31.521] (==) Matched nouveau as autoconfigured driver 3
[    31.521] (==) Matched modesetting as autoconfigured driver 4
[    31.521] (==) Matched fbdev as autoconfigured driver 5
[    31.521] (==) Matched vesa as autoconfigured driver 6
[    31.521] (==) Assigned the driver to the xf86ConfigLayout
[    31.521] (II) LoadModule: "nvidia"
[    31.522] (WW) Warning, couldn't open module nvidia
[    31.522] (II) UnloadModule: "nvidia"
[    31.522] (II) Unloading nvidia
[    31.522] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    31.522] (II) LoadModule: "nouveau"
[    31.522] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    31.522] (II) Module nouveau: vendor="X.Org Foundation"
[    31.522] 	compiled for 1.18.1, module version = 1.0.12
[    31.522] 	Module class: X.Org Video Driver
[    31.522] 	ABI class: X.Org Video Driver, version 20.0
[    31.522] (II) UnloadModule: "nouveau"
[    31.522] (II) Unloading nouveau
[    31.522] (II) Failed to load module "nouveau" (already loaded, 0)
[    31.522] (II) LoadModule: "modesetting"
[    31.522] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    31.522] (II) Module modesetting: vendor="X.Org Foundation"
[    31.522] 	compiled for 1.18.3, module version = 1.18.3
[    31.522] 	Module class: X.Org Video Driver
[    31.522] 	ABI class: X.Org Video Driver, version 20.0
[    31.522] (II) UnloadModule: "modesetting"
[    31.522] (II) Unloading modesetting
[    31.522] (II) Failed to load module "modesetting" (already loaded, 0)
[    31.522] (II) LoadModule: "fbdev"
[    31.522] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    31.522] (II) Module fbdev: vendor="X.Org Foundation"
[    31.522] 	compiled for 1.18.1, module version = 0.4.4
[    31.522] 	Module class: X.Org Video Driver
[    31.522] 	ABI class: X.Org Video Driver, version 20.0
[    31.522] (II) UnloadModule: "fbdev"
[    31.522] (II) Unloading fbdev
[    31.522] (II) Failed to load module "fbdev" (already loaded, 0)
[    31.522] (II) LoadModule: "vesa"
[    31.522] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    31.522] (II) Module vesa: vendor="X.Org Foundation"
[    31.522] 	compiled for 1.18.1, module version = 2.3.4
[    31.522] 	Module class: X.Org Video Driver
[    31.522] 	ABI class: X.Org Video Driver, version 20.0
[    31.522] (II) UnloadModule: "vesa"
[    31.522] (II) Unloading vesa
[    31.522] (II) Failed to load module "vesa" (already loaded, 0)
[    31.522] (II) NOUVEAU driver Date:   Tue Dec 8 15:52:25 2015 +1000
[    31.522] (II) NOUVEAU driver for NVIDIA chipset families :
[    31.522] 	RIVA TNT        (NV04)
[    31.523] 	RIVA TNT2       (NV05)
[    31.523] 	GeForce 256     (NV10)
[    31.523] 	GeForce 2       (NV11, NV15)
[    31.523] 	GeForce 4MX     (NV17, NV18)
[    31.523] 	GeForce 3       (NV20)
[    31.523] 	GeForce 4Ti     (NV25, NV28)
[    31.523] 	GeForce FX      (NV3x)
[    31.523] 	GeForce 6       (NV4x)
[    31.523] 	GeForce 7       (G7x)
[    31.523] 	GeForce 8       (G8x)
[    31.523] 	GeForce GTX 200 (NVA0)
[    31.523] 	GeForce GTX 400 (NVC0)
[    31.523] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    31.523] (II) FBDEV: driver for framebuffer: fbdev
[    31.523] (II) VESA: driver for VESA chipsets: vesa
[    31.523] (II) [drm] nouveau interface version: 1.3.1
[    31.523] (WW) Falling back to old probe method for modesetting
[    31.523] (WW) Falling back to old probe method for fbdev
[    31.523] (II) Loading sub module "fbdevhw"
[    31.523] (II) LoadModule: "fbdevhw"
[    31.523] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    31.523] (II) Module fbdevhw: vendor="X.Org Foundation"
[    31.523] 	compiled for 1.18.3, module version = 0.0.2
[    31.523] 	ABI class: X.Org Video Driver, version 20.0
[    31.523] (WW) Falling back to old probe method for vesa
[    31.523] (II) Loading sub module "dri2"
[    31.523] (II) LoadModule: "dri2"
[    31.523] (II) Module "dri2" already built-in
[    31.523] (--) NOUVEAU(0): Chipset: "NVIDIA NV46"
[    31.523] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    31.523] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    31.523] (==) NOUVEAU(0): RGB weight 888
[    31.523] (==) NOUVEAU(0): Default visual is TrueColor
[    31.523] (==) NOUVEAU(0): Using HW cursor
[    31.523] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[    31.523] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[    31.523] (==) NOUVEAU(0): Page flipping enabled
[    31.523] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[    31.523] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[    31.523] (II) NOUVEAU(0): Initializing outputs ...
[    31.554] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    31.584] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[    31.612] (II) NOUVEAU(0): Output TV-1 has no monitor section
[    31.612] (II) NOUVEAU(0): 3 crtcs needed for screen.
[    31.612] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[    31.612] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[    31.642] (II) NOUVEAU(0): EDID for output VGA-1
[    31.642] (II) NOUVEAU(0): Manufacturer: PHL  Model: c0c5  Serial#: 764
[    31.642] (II) NOUVEAU(0): Year: 2014  Week: 35
[    31.642] (II) NOUVEAU(0): EDID Version: 1.3
[    31.642] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    31.642] (II) NOUVEAU(0): Sync:  Separate  Composite  SyncOnGreen
[    31.642] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53  vert.: 30
[    31.642] (II) NOUVEAU(0): Gamma: 2.20
[    31.642] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[    31.642] (II) NOUVEAU(0): First detailed timing is preferred mode
[    31.642] (II) NOUVEAU(0): redX: 0.650 redY: 0.333   greenX: 0.332 greenY: 0.623
[    31.642] (II) NOUVEAU(0): blueX: 0.157 blueY: 0.053   whiteX: 0.313 whiteY: 0.329
[    31.642] (II) NOUVEAU(0): Supported established timings:
[    31.642] (II) NOUVEAU(0): 720x400@70Hz
[    31.642] (II) NOUVEAU(0): 640x480@60Hz
[    31.642] (II) NOUVEAU(0): 640x480@67Hz
[    31.642] (II) NOUVEAU(0): 640x480@72Hz
[    31.642] (II) NOUVEAU(0): 640x480@75Hz
[    31.642] (II) NOUVEAU(0): 800x600@60Hz
[    31.642] (II) NOUVEAU(0): 800x600@75Hz
[    31.642] (II) NOUVEAU(0): 1024x768@60Hz
[    31.642] (II) NOUVEAU(0): 1024x768@75Hz
[    31.642] (II) NOUVEAU(0): 1280x1024@75Hz
[    31.642] (II) NOUVEAU(0): Manufacturer's mask: 0
[    31.642] (II) NOUVEAU(0): Supported standard timings:
[    31.642] (II) NOUVEAU(0): #0: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    31.642] (II) NOUVEAU(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    31.643] (II) NOUVEAU(0): #2: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[    31.643] (II) NOUVEAU(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    31.643] (II) NOUVEAU(0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    31.643] (II) NOUVEAU(0): #5: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    31.643] (II) NOUVEAU(0): Supported detailed timing:
[    31.643] (II) NOUVEAU(0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[    31.643] (II) NOUVEAU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    31.643] (II) NOUVEAU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    31.643] (II) NOUVEAU(0): Serial No: AU01435000764
[    31.643] (II) NOUVEAU(0): Monitor name: PHL 246V5
[    31.643] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    31.643] (II) NOUVEAU(0): EDID (in hex):
[    31.643] (II) NOUVEAU(0): 	00ffffffffffff00410cc5c0fc020000
[    31.643] (II) NOUVEAU(0): 	231801036e351e782a9265a655559f28
[    31.643] (II) NOUVEAU(0): 	0d5054bd4b00d1c08180950f9500b300
[    31.643] (II) NOUVEAU(0): 	81c001010101023a801871382d40582c
[    31.643] (II) NOUVEAU(0): 	4500132b2100001e000000ff00415530
[    31.643] (II) NOUVEAU(0): 	31343335303030373634000000fc0050
[    31.643] (II) NOUVEAU(0): 	484c2032343656350a202020000000fd
[    31.643] (II) NOUVEAU(0): 	00384c1e5311000a20202020202000b9
[    31.643] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[    31.643] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    31.643] (II) NOUVEAU(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    31.643] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    31.643] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    31.643] (II) NOUVEAU(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    31.643] (II) NOUVEAU(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    31.643] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    31.643] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    31.643] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    31.643] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    31.643] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    31.643] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    31.643] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    31.643] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    31.643] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    31.643] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    31.676] (II) NOUVEAU(0): EDID for output DVI-I-1
[    31.704] (II) NOUVEAU(0): EDID for output TV-1
[    31.704] (II) NOUVEAU(0): Output VGA-1 connected
[    31.704] (II) NOUVEAU(0): Output DVI-I-1 disconnected
[    31.704] (II) NOUVEAU(0): Output TV-1 disconnected
[    31.704] (II) NOUVEAU(0): Using exact sizes for initial modes
[    31.704] (II) NOUVEAU(0): Output VGA-1 using initial mode 1920x1080 +0+0
[    31.704] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    31.704] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[    31.704] (**) NOUVEAU(0):  Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[    31.704] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    31.704] (**) NOUVEAU(0):  Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[    31.704] (II) NOUVEAU(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    31.704] (**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[    31.704] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    31.704] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[    31.704] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    31.704] (**) NOUVEAU(0):  Driver mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
[    31.704] (II) NOUVEAU(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    31.704] (**) NOUVEAU(0):  Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
[    31.704] (II) NOUVEAU(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    31.704] (**) NOUVEAU(0):  Driver mode "1280x720": 74.2 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz
[    31.704] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    31.704] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[    31.704] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    31.704] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    31.704] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    31.704] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[    31.704] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    31.704] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    31.704] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    31.704] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[    31.704] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    31.704] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[    31.704] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    31.704] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[    31.704] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    31.704] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[    31.704] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    31.704] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[    31.704] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    31.704] (==) NOUVEAU(0): DPI set to (96, 96)
[    31.704] (II) Loading sub module "fb"
[    31.704] (II) LoadModule: "fb"
[    31.704] (II) Loading /usr/lib/xorg/modules/libfb.so
[    31.742] (II) Module fb: vendor="X.Org Foundation"
[    31.742] 	compiled for 1.18.3, module version = 1.0.0
[    31.742] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    31.742] (II) Loading sub module "shadowfb"
[    31.742] (II) LoadModule: "shadowfb"
[    31.742] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    31.742] (II) Module shadowfb: vendor="X.Org Foundation"
[    31.742] 	compiled for 1.18.3, module version = 1.0.0
[    31.742] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    31.742] (II) UnloadModule: "modesetting"
[    31.742] (II) Unloading modesetting
[    31.742] (II) UnloadModule: "fbdev"
[    31.742] (II) Unloading fbdev
[    31.742] (II) UnloadSubModule: "fbdevhw"
[    31.742] (II) Unloading fbdevhw
[    31.742] (II) UnloadModule: "vesa"
[    31.742] (II) Unloading vesa
[    31.742] (--) Depth 24 pixmap format is 32 bpp
[    31.745] (II) NOUVEAU(0): Channel setup complete.
[    31.800] (II) NOUVEAU(0): Hardware support for Present enabled
[    31.800] (II) NOUVEAU(0): [DRI2] Setup complete
[    31.800] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    31.800] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    31.800] (II) Loading sub module "exa"
[    31.800] (II) LoadModule: "exa"
[    31.800] (II) Loading /usr/lib/xorg/modules/libexa.so
[    31.800] (II) Module exa: vendor="X.Org Foundation"
[    31.800] 	compiled for 1.18.3, module version = 2.6.0
[    31.800] 	ABI class: X.Org Video Driver, version 20.0
[    31.800] (II) EXA(0): Driver allocated offscreen pixmaps
[    31.800] (II) EXA(0): Driver registered support for the following operations:
[    31.800] (II)         Solid
[    31.800] (II)         Copy
[    31.800] (II)         Composite (RENDER acceleration)
[    31.800] (II)         UploadToScreen
[    31.801] (II)         DownloadFromScreen
[    31.801] (==) NOUVEAU(0): Backing store enabled
[    31.801] (==) NOUVEAU(0): Silken mouse enabled
[    31.801] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[    31.801] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    31.801] (==) NOUVEAU(0): DPMS enabled
[    31.801] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    31.801] (--) RandR disabled
[    31.809] (II) SELinux: Disabled on system
[    33.324] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    33.324] (II) AIGLX: enabled GLX_ARB_create_context
[    33.325] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    33.325] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    33.325] (II) AIGLX: enabled GLX_INTEL_swap_event
[    33.325] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    33.325] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    33.325] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    33.325] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    33.325] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    33.325] (II) AIGLX: Loaded and initialized nouveau
[    33.325] (II) GLX: Initialized DRI2 GL provider for screen 0
[    33.343] (II) NOUVEAU(0): NVEnterVT is called.
[    33.344] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[    33.344] resize called 1920 1080
[    33.413] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    33.413] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    33.414] (II) LoadModule: "evdev"
[    33.414] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    33.442] (II) Module evdev: vendor="X.Org Foundation"
[    33.442] 	compiled for 1.18.1, module version = 2.10.1
[    33.442] 	Module class: X.Org XInput Driver
[    33.442] 	ABI class: X.Org XInput driver, version 22.1
[    33.442] (II) Using input driver 'evdev' for 'Power Button'
[    33.442] (**) Power Button: always reports core events
[    33.442] (**) evdev: Power Button: Device: "/dev/input/event2"
[    33.442] (--) evdev: Power Button: Vendor 0 Product 0x1
[    33.442] (--) evdev: Power Button: Found keys
[    33.442] (II) evdev: Power Button: Configuring as keyboard
[    33.442] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    33.442] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    33.442] (**) Option "xkb_rules" "evdev"
[    33.442] (**) Option "xkb_model" "pc105"
[    33.442] (**) Option "xkb_layout" "be"
[    33.442] (**) Option "xkb_variant" "nodeadkeys"
[    33.457] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    33.457] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    33.457] (II) Using input driver 'evdev' for 'Power Button'
[    33.457] (**) Power Button: always reports core events
[    33.457] (**) evdev: Power Button: Device: "/dev/input/event1"
[    33.457] (--) evdev: Power Button: Vendor 0 Product 0x1
[    33.457] (--) evdev: Power Button: Found keys
[    33.457] (II) evdev: Power Button: Configuring as keyboard
[    33.457] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    33.457] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    33.457] (**) Option "xkb_rules" "evdev"
[    33.457] (**) Option "xkb_model" "pc105"
[    33.457] (**) Option "xkb_layout" "be"
[    33.457] (**) Option "xkb_variant" "nodeadkeys"
[    33.458] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[    33.458] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    33.458] (II) Using input driver 'evdev' for 'Sleep Button'
[    33.458] (**) Sleep Button: always reports core events
[    33.458] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[    33.458] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    33.458] (--) evdev: Sleep Button: Found keys
[    33.458] (II) evdev: Sleep Button: Configuring as keyboard
[    33.458] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[    33.458] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    33.458] (**) Option "xkb_rules" "evdev"
[    33.458] (**) Option "xkb_model" "pc105"
[    33.458] (**) Option "xkb_layout" "be"
[    33.458] (**) Option "xkb_variant" "nodeadkeys"
[    33.459] (II) config/udev: Adding input device Telink 2.4G Mouse (/dev/input/event3)
[    33.459] (**) Telink 2.4G Mouse: Applying InputClass "evdev pointer catchall"
[    33.459] (**) Telink 2.4G Mouse: Applying InputClass "evdev keyboard catchall"
[    33.459] (II) Using input driver 'evdev' for 'Telink 2.4G Mouse'
[    33.459] (**) Telink 2.4G Mouse: always reports core events
[    33.459] (**) evdev: Telink 2.4G Mouse: Device: "/dev/input/event3"
[    33.459] (--) evdev: Telink 2.4G Mouse: Vendor 0x248a Product 0x8366
[    33.459] (--) evdev: Telink 2.4G Mouse: Found 9 mouse buttons
[    33.459] (--) evdev: Telink 2.4G Mouse: Found scroll wheel(s)
[    33.459] (--) evdev: Telink 2.4G Mouse: Found relative axes
[    33.459] (--) evdev: Telink 2.4G Mouse: Found x and y relative axes
[    33.459] (--) evdev: Telink 2.4G Mouse: Found absolute axes
[    33.459] (II) evdev: Telink 2.4G Mouse: Forcing absolute x/y axes to exist.
[    33.459] (--) evdev: Telink 2.4G Mouse: Found keys
[    33.459] (II) evdev: Telink 2.4G Mouse: Configuring as mouse
[    33.459] (II) evdev: Telink 2.4G Mouse: Configuring as keyboard
[    33.459] (II) evdev: Telink 2.4G Mouse: Adding scrollwheel support
[    33.459] (**) evdev: Telink 2.4G Mouse: YAxisMapping: buttons 4 and 5
[    33.459] (**) evdev: Telink 2.4G Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    33.459] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:248A:8366.0001/input/input5/event3"
[    33.459] (II) XINPUT: Adding extended input device "Telink 2.4G Mouse" (type: KEYBOARD, id 9)
[    33.459] (**) Option "xkb_rules" "evdev"
[    33.459] (**) Option "xkb_model" "pc105"
[    33.459] (**) Option "xkb_layout" "be"
[    33.459] (**) Option "xkb_variant" "nodeadkeys"
[    33.459] (II) evdev: Telink 2.4G Mouse: initialized for relative axes.
[    33.459] (WW) evdev: Telink 2.4G Mouse: ignoring absolute axes.
[    33.459] (**) Telink 2.4G Mouse: (accel) keeping acceleration scheme 1
[    33.459] (**) Telink 2.4G Mouse: (accel) acceleration profile 0
[    33.459] (**) Telink 2.4G Mouse: (accel) acceleration factor: 2.000
[    33.459] (**) Telink 2.4G Mouse: (accel) acceleration threshold: 4
[    33.460] (II) config/udev: Adding input device Telink 2.4G Mouse (/dev/input/mouse0)
[    33.460] (II) No input driver specified, ignoring this device.
[    33.460] (II) This device may have been added with another device file.
[    33.460] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event7)
[    33.460] (II) No input driver specified, ignoring this device.
[    33.460] (II) This device may have been added with another device file.
[    33.460] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event8)
[    33.460] (II) No input driver specified, ignoring this device.
[    33.460] (II) This device may have been added with another device file.
[    33.461] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event9)
[    33.461] (II) No input driver specified, ignoring this device.
[    33.461] (II) This device may have been added with another device file.
[    33.461] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event10)
[    33.461] (II) No input driver specified, ignoring this device.
[    33.461] (II) This device may have been added with another device file.
[    33.461] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event6)
[    33.461] (II) No input driver specified, ignoring this device.
[    33.461] (II) This device may have been added with another device file.
[    33.462] (II) config/udev: Adding input device HOLTEK Wireless USB Device (/dev/input/event4)
[    33.462] (**) HOLTEK Wireless USB Device: Applying InputClass "evdev keyboard catchall"
[    33.462] (II) Using input driver 'evdev' for 'HOLTEK Wireless USB Device'
[    33.462] (**) HOLTEK Wireless USB Device: always reports core events
[    33.462] (**) evdev: HOLTEK Wireless USB Device: Device: "/dev/input/event4"
[    33.462] (--) evdev: HOLTEK Wireless USB Device: Vendor 0x4d9 Product 0xa01c
[    33.462] (--) evdev: HOLTEK Wireless USB Device: Found keys
[    33.462] (II) evdev: HOLTEK Wireless USB Device: Configuring as keyboard
[    33.462] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/0003:04D9:A01C.0002/input/input7/event4"
[    33.462] (II) XINPUT: Adding extended input device "HOLTEK Wireless USB Device" (type: KEYBOARD, id 10)
[    33.462] (**) Option "xkb_rules" "evdev"
[    33.462] (**) Option "xkb_model" "pc105"
[    33.462] (**) Option "xkb_layout" "be"
[    33.462] (**) Option "xkb_variant" "nodeadkeys"
[    33.462] (II) config/udev: Adding input device HOLTEK Wireless USB Device (/dev/input/event5)
[    33.462] (**) HOLTEK Wireless USB Device: Applying InputClass "evdev pointer catchall"
[    33.462] (**) HOLTEK Wireless USB Device: Applying InputClass "evdev keyboard catchall"
[    33.462] (II) Using input driver 'evdev' for 'HOLTEK Wireless USB Device'
[    33.462] (**) HOLTEK Wireless USB Device: always reports core events
[    33.462] (**) evdev: HOLTEK Wireless USB Device: Device: "/dev/input/event5"
[    33.462] (--) evdev: HOLTEK Wireless USB Device: Vendor 0x4d9 Product 0xa01c
[    33.462] (--) evdev: HOLTEK Wireless USB Device: Found 9 mouse buttons
[    33.462] (--) evdev: HOLTEK Wireless USB Device: Found scroll wheel(s)
[    33.462] (--) evdev: HOLTEK Wireless USB Device: Found relative axes
[    33.462] (--) evdev: HOLTEK Wireless USB Device: Found x and y relative axes
[    33.462] (--) evdev: HOLTEK Wireless USB Device: Found keys
[    33.462] (II) evdev: HOLTEK Wireless USB Device: Configuring as mouse
[    33.462] (II) evdev: HOLTEK Wireless USB Device: Configuring as keyboard
[    33.462] (II) evdev: HOLTEK Wireless USB Device: Adding scrollwheel support
[    33.462] (**) evdev: HOLTEK Wireless USB Device: YAxisMapping: buttons 4 and 5
[    33.462] (**) evdev: HOLTEK Wireless USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    33.462] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/0003:04D9:A01C.0003/input/input8/event5"
[    33.462] (II) XINPUT: Adding extended input device "HOLTEK Wireless USB Device" (type: KEYBOARD, id 11)
[    33.462] (**) Option "xkb_rules" "evdev"
[    33.463] (**) Option "xkb_model" "pc105"
[    33.463] (**) Option "xkb_layout" "be"
[    33.463] (**) Option "xkb_variant" "nodeadkeys"
[    33.463] (II) evdev: HOLTEK Wireless USB Device: initialized for relative axes.
[    33.463] (**) HOLTEK Wireless USB Device: (accel) keeping acceleration scheme 1
[    33.463] (**) HOLTEK Wireless USB Device: (accel) acceleration profile 0
[    33.463] (**) HOLTEK Wireless USB Device: (accel) acceleration factor: 2.000
[    33.463] (**) HOLTEK Wireless USB Device: (accel) acceleration threshold: 4
[    33.463] (II) config/udev: Adding input device HOLTEK Wireless USB Device (/dev/input/mouse1)
[    33.463] (II) No input driver specified, ignoring this device.
[    33.463] (II) This device may have been added with another device file.
[    43.028] (II) NOUVEAU(0): EDID vendor "PHL", prod id 49349
[    43.028] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    43.028] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    43.028] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    43.028] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    43.028] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    43.028] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    43.028] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    43.028] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    43.028] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    43.028] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    43.028] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    43.028] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    43.028] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    43.028] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    43.028] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    43.028] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    43.028] (II) NOUVEAU(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    43.028] (II) NOUVEAU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    43.028] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    43.028] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    45.191] (II) NOUVEAU(0): EDID vendor "PHL", prod id 49349
[    45.191] (II) NOUVEAU(0): Using hsync ranges from config file
[    45.191] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    45.191] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    45.191] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    45.191] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    45.191] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    45.191] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    45.191] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    45.191] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    45.191] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    45.191] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    45.191] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    45.191] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    45.191] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    45.191] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    45.191] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    45.191] (II) NOUVEAU(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    45.191] (II) NOUVEAU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    45.191] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    45.191] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)

Modération : merci à l'avenir d'utiliser les balises code (explications ici).

Dernière modification par cqfd93 (Le 06/06/2016, à 11:12)

Hors ligne

#2 Le 06/06/2016, à 21:03

foustala

Re : geForce 7500LE problème affichage (vidéos hachées, lignes parasites,..

guylapi a écrit :
          
       description: VGA compatible controller
       produit: G72 [GeForce 7500 LE]
       fabriquant: NVIDIA Corporation
       configuration: driver=nouveau

Hello,

tu sembles utiliser le driver libre nouveau, essaie avec le driver proprio en version 304. s'installe facilement avec le gui pilotes additionnels

Dernière modification par foustala (Le 06/06/2016, à 21:03)

Hors ligne

#3 Le 06/06/2016, à 21:24

guylapi

Re : geForce 7500LE problème affichage (vidéos hachées, lignes parasites,..

vais essayer, je te redis dans quelques temps.

merci

Hors ligne

#4 Le 06/06/2016, à 22:19

guylapi

Re : geForce 7500LE problème affichage (vidéos hachées, lignes parasites,..

bon, ça roule par contre, maintenant quand je regarde le gestionnaire des pilotes, la page reste vierge.
est-ce normal ?

Hors ligne

#5 Le 06/06/2016, à 22:31

foustala

Re : geForce 7500LE problème affichage (vidéos hachées, lignes parasites,..

comment as tu installé le driver?

Hors ligne