Ubuntu-fr

Croa

[Résolu] Démarrages lents et aléatoires

Bonjour,

Le problème présenté ici concerne un petit portable. J'ai des problèmes de démarrage non récurrents : Parfois démarrages en 3 ou 4 mn donc trop lents, d'autres fois apparemment normaux (1 mn) et d'autres, quoique pas souvent, n'aboutissant jamais. L'idée comme quoi il y aurait un problème de lecture du disque parait donc vraisemblable mais bon... Peut-être pas?

Le dernier démarrage a été presque normal, voilà tout de même son dmesg

 [    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-86-generic (buildd@lgw01-51) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #131-Ubuntu SMP Thu May 12 23:33:13 UTC 2016 (Ubuntu 3.13.0-86.131-generic 3.13.11-ckt39)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-86-generic root=UUID=be7b4faf-5d09-45e4-9de9-0368e3f8f0ee ro quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x0000000078ae1fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078ae2000-0x0000000078df4fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000078df5000-0x0000000078e7efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078e7f000-0x0000000078f19fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000078f1a000-0x0000000079507fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079508000-0x0000000079508fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079509000-0x000000007954bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007954c000-0x0000000079c41fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079c42000-0x0000000079ff2fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079ff3000-0x0000000079ffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a800000-0x000000007e9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Notebook                        W310CZ/CZ-T      /W310CZ          , BIOS 4.6.5 12/24/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x100600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FFFC00000 write-back
[    0.000000]   2 base 100400000 mask FFFE00000 write-back
[    0.000000]   3 base 080000000 mask F80000000 uncachable
[    0.000000]   4 base 07C000000 mask FFC000000 uncachable
[    0.000000]   5 base 07B000000 mask FFF000000 uncachable
[    0.000000]   6 base 07A800000 mask FFF800000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 4GB, type WB
[    0.000000] reg 1, base: 4GB, range: 4MB, type WB
[    0.000000] reg 2, base: 4100MB, range: 2MB, type WB
[    0.000000] reg 3, base: 2GB, range: 2GB, type UC
[    0.000000] reg 4, base: 1984MB, range: 64MB, type UC
[    0.000000] reg 5, base: 1968MB, range: 16MB, type UC
[    0.000000] reg 6, base: 1960MB, range: 8MB, type UC
[    0.000000] total RAM covered: 1966M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 1960MB, range: 8MB, type UC
[    0.000000] reg 2, base: 1968MB, range: 16MB, type UC
[    0.000000] reg 3, base: 1984MB, range: 64MB, type UC
[    0.000000] reg 4, base: 4GB, range: 4MB, type WB
[    0.000000] reg 5, base: 4100MB, range: 2MB, type WB
[    0.000000] e820: update [mem 0x7a800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd780-0x000fd78f] mapped at [ffff8800000fd780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[    0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[    0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100400000-0x1005fffff]
[    0.000000]  [mem 0x100400000-0x1005fffff] page 2M
[    0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1003fffff]
[    0.000000]  [mem 0x100000000-0x1003fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
[    0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[    0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x40005000-0x78ae1fff]
[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
[    0.000000]  [mem 0x40200000-0x789fffff] page 2M
[    0.000000]  [mem 0x78a00000-0x78ae1fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x78df5000-0x78e7efff]
[    0.000000]  [mem 0x78df5000-0x78e7efff] page 4k
[    0.000000] init_memory_mapping: [mem 0x79508000-0x79508fff]
[    0.000000]  [mem 0x79508000-0x79508fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x7954c000-0x79c41fff]
[    0.000000]  [mem 0x7954c000-0x795fffff] page 4k
[    0.000000]  [mem 0x79600000-0x79bfffff] page 2M
[    0.000000]  [mem 0x79c00000-0x79c41fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x79ff3000-0x79ffffff]
[    0.000000]  [mem 0x79ff3000-0x79ffffff] page 4k
[    0.000000] RAMDISK: [mem 0x346b4000-0x36351fff]
[    0.000000] ACPI: RSDP 00000000000f0490 000024 (v02  Intel)
[    0.000000] ACPI: XSDT 0000000078f0a078 00006C (v01  Intel    CHIEF 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0000000078f13f30 00010C (v05  Intel    CHIEF 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0000000078f0a178 009DB7 (v02  Intel    CHIEF 00000023 INTL 20051117)
[    0.000000] ACPI: FACS 0000000078f18080 000040
[    0.000000] ACPI: APIC 0000000078f14040 000062 (v03  Intel    CHIEF 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0000000078f140a8 000044 (v01  Intel    CHIEF 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0000000078f140f0 00003C (v01  Intel    CHIEF 01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0000000078f14130 000F92 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[    0.000000] ACPI: HPET 0000000078f150c8 000038 (v01  Intel    CHIEF 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0000000078f15100 000315 (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0000000078f15418 000860 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0000000078f15c78 000B22 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001005fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x1005fffff]
[    0.000000]   NODE_DATA [mem 0x1005f5000-0x1005f9fff]
[    0.000000]  [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880076800000-ffff8800789fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x1005fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x40003fff]
[    0.000000]   node   0: [mem 0x40005000-0x78ae1fff]
[    0.000000]   node   0: [mem 0x78df5000-0x78e7efff]
[    0.000000]   node   0: [mem 0x79508000-0x79508fff]
[    0.000000]   node   0: [mem 0x7954c000-0x79c41fff]
[    0.000000]   node   0: [mem 0x79ff3000-0x79ffffff]
[    0.000000]   node   0: [mem 0x100000000-0x1005fffff]
[    0.000000] On node 0 totalpages: 497163
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7682 pages used for memmap
[    0.000000]   DMA32 zone: 491631 pages, LIFO batch:31
[    0.000000]   Normal zone: 24 pages used for memmap
[    0.000000]   Normal zone: 1536 pages, LIFO batch:0
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0x78ae2000-0x78df4fff]
[    0.000000] PM: Registered nosave memory: [mem 0x78e7f000-0x78f19fff]
[    0.000000] PM: Registered nosave memory: [mem 0x78f1a000-0x79507fff]
[    0.000000] PM: Registered nosave memory: [mem 0x79509000-0x7954bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x79c42000-0x79ff2fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a000000-0x7a7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a800000-0x7e9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ea00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x7ea00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff880100200000 s81536 r8192 d20864 u1048576
[    0.000000] pcpu-alloc: s81536 r8192 d20864 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 489372
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-86-generic root=UUID=be7b4faf-5d09-45e4-9de9-0368e3f8f0ee ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1841596K/1988652K available (7421K kernel code, 1146K rwdata, 3416K rodata, 1336K init, 1448K bss, 147056K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-1.
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 8912896 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1795.830 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.66 BogoMIPS (lpj=7183320)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000037] Security Framework initialized
[    0.000057] AppArmor: AppArmor initialized
[    0.000058] Yama: becoming mindful.
[    0.000301] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001008] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.001323] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.001329] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.001544] Initializing cgroup subsys memory
[    0.001551] Initializing cgroup subsys devices
[    0.001553] Initializing cgroup subsys freezer
[    0.001555] Initializing cgroup subsys blkio
[    0.001556] Initializing cgroup subsys perf_event
[    0.001559] Initializing cgroup subsys hugetlb
[    0.001585] CPU: Physical Processor ID: 0
[    0.001586] CPU: Processor Core ID: 0
[    0.001592] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.001592] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.001596] mce: CPU supports 7 MCE banks
[    0.001610] CPU0: Thermal monitoring enabled (TM1)
[    0.001618] process: using mwait in idle threads
[    0.001623] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.001623] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.001623] tlb_flushall_shift: 2
[    0.001777] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[    0.003281] ACPI: Core revision 20131115
[    0.009309] ACPI: All ACPI Tables successfully acquired
[    0.019983] ftrace: allocating 28609 entries in 112 pages
[    0.038048] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.077720] smpboot: CPU0: Intel(R) Celeron(R) CPU 1037U @ 1.80GHz (fam: 06, model: 3a, stepping: 09)
[    0.077730] TSC deadline timer enabled
[    0.077742] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.077751] ... version:                3
[    0.077752] ... bit width:              48
[    0.077753] ... generic registers:      8
[    0.077755] ... value mask:             0000ffffffffffff
[    0.077756] ... max period:             0000ffffffffffff
[    0.077757] ... fixed-purpose events:   3
[    0.077758] ... event mask:             00000007000000ff
[    0.079740] x86: Booting SMP configuration:
[    0.079742] .... node  #0, CPUs:      #1
[    0.092803] x86: Booted up 1 node, 2 CPUs
[    0.092807] smpboot: Total of 2 processors activated (7183.32 BogoMIPS)
[    0.092886] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.094469] devtmpfs: initialized
[    0.097403] EVM: security.selinux
[    0.097405] EVM: security.SMACK64
[    0.097406] EVM: security.ima
[    0.097407] EVM: security.capability
[    0.097456] PM: Registering ACPI NVS region [mem 0x78e7f000-0x78f19fff] (634880 bytes)
[    0.097468] PM: Registering ACPI NVS region [mem 0x79509000-0x7954bfff] (274432 bytes)
[    0.098399] pinctrl core: initialized pinctrl subsystem
[    0.098468] regulator-dummy: no parameters
[    0.098503] RTC time: 14:47:24, date: 05/30/16
[    0.098543] NET: Registered protocol family 16
[    0.098651] cpuidle: using governor ladder
[    0.098653] cpuidle: using governor menu
[    0.098688] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.098690] ACPI: bus type PCI registered
[    0.098692] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.098749] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.098752] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.108527] PCI: Using configuration type 1 for base access
[    0.109434] bio: create slab <bio-0> at 0
[    0.109588] ACPI: Added _OSI(Module Device)
[    0.109591] ACPI: Added _OSI(Processor Device)
[    0.109592] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.109594] ACPI: Added _OSI(Processor Aggregator Device)
[    0.112724] ACPI: Executed 1 blocks of module-level executable AML code
[    0.118329] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.118806] ACPI: SSDT 0000000078da2018 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.119192] ACPI: Dynamic OEM Table Load:
[    0.119195] ACPI: SSDT           (null) 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.122531] ACPI: SSDT 0000000078da3a98 000303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.122951] ACPI: Dynamic OEM Table Load:
[    0.122953] ACPI: SSDT           (null) 000303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.126381] ACPI: SSDT 0000000078da4c18 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.126758] ACPI: Dynamic OEM Table Load:
[    0.126760] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.342429] ACPI: Interpreter enabled
[    0.342438] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.342443] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.342459] ACPI: (supports S0 S3 S4 S5)
[    0.342461] ACPI: Using IOAPIC for interrupt routing
[    0.342491] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.342654] ACPI: No dock devices found.
[    0.351316] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.351323] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.351594] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.351762] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.351764] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.352459] PCI host bridge to bus 0000:00
[    0.352463] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.352465] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.352467] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.352469] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.352471] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.352473] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.352475] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.352477] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.352479] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.352481] pci_bus 0000:00: root bus resource [mem 0x7ea00000-0xfeafffff]
[    0.352490] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.352588] pci 0000:00:02.0: [8086:0156] type 00 class 0x030000
[    0.352602] pci 0000:00:02.0: reg 0x10: [mem 0xf7000000-0xf73fffff 64bit]
[    0.352610] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.352615] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.352733] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.352761] pci 0000:00:16.0: reg 0x10: [mem 0xf7f0a000-0xf7f0a00f 64bit]
[    0.352846] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.352942] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.352967] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f08000-0xf7f083ff]
[    0.353070] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.353137] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.353178] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.353197] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f00000-0xf7f03fff 64bit]
[    0.353277] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.353329] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.353364] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.353457] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.353512] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.353548] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.353638] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.353692] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.353728] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[    0.353817] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.353871] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.353917] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.353942] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f07000-0xf7f073ff]
[    0.354044] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.354109] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.354146] pci 0000:00:1f.0: [8086:1e5f] type 00 class 0x060100
[    0.354338] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.354366] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.354377] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.354386] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.354396] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.354405] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.354416] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f06000-0xf7f067ff]
[    0.354470] pci 0000:00:1f.2: PME# supported from D3hot
[    0.354547] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.354567] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f05000-0xf7f050ff 64bit]
[    0.354592] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.354757] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.354930] pci 0000:02:00.0: [8086:0892] type 00 class 0x028000
[    0.355014] pci 0000:02:00.0: reg 0x10: [mem 0xf7e00000-0xf7e01fff 64bit]
[    0.355444] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.355523] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.362497] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.362504] pci 0000:00:1c.2:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.362686] pci 0000:03:00.0: [10ec:5286] type 00 class 0xff0000
[    0.362758] pci 0000:03:00.0: reg 0x10: [mem 0xf7400000-0xf740ffff]
[    0.363338] pci 0000:03:00.0: supports D1 D2
[    0.363340] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.363465] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.363582] pci 0000:03:00.2: [10ec:8136] type 00 class 0x020000
[    0.363654] pci 0000:03:00.2: reg 0x10: [io  0xe000-0xe0ff]
[    0.363780] pci 0000:03:00.2: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.363858] pci 0000:03:00.2: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.364204] pci 0000:03:00.2: supports D1 D2
[    0.364206] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.364313] pci 0000:03:00.2: System wakeup disabled by ACPI
[    0.370469] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.370474] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.370479] pci 0000:00:1c.3:   bridge window [mem 0xf7400000-0xf7dfffff]
[    0.370486] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
[    0.371059] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.371119] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.371176] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.371233] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.371289] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.371346] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.371403] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.371458] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.371751] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.371759] ACPI: \_SB_.PCI0: notify handler is installed
[    0.371819] Found 1 acpi root devices
[    0.371861] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.371967] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.371969] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.371973] vgaarb: loaded
[    0.371974] vgaarb: bridge control possible 0000:00:02.0
[    0.372148] SCSI subsystem initialized
[    0.372202] libata version 3.00 loaded.
[    0.372228] ACPI: bus type USB registered
[    0.372246] usbcore: registered new interface driver usbfs
[    0.372254] usbcore: registered new interface driver hub
[    0.372282] usbcore: registered new device driver usb
[    0.372381] PCI: Using ACPI for IRQ routing
[    0.374125] PCI: pci_cache_line_size set to 64 bytes
[    0.374233] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.374236] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.374237] e820: reserve RAM buffer [mem 0x78ae2000-0x7bffffff]
[    0.374240] e820: reserve RAM buffer [mem 0x78e7f000-0x7bffffff]
[    0.374242] e820: reserve RAM buffer [mem 0x79509000-0x7bffffff]
[    0.374244] e820: reserve RAM buffer [mem 0x79c42000-0x7bffffff]
[    0.374246] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
[    0.374248] e820: reserve RAM buffer [mem 0x100600000-0x103ffffff]
[    0.374333] NetLabel: Initializing
[    0.374335] NetLabel:  domain hash size = 128
[    0.374336] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.374350] NetLabel:  unlabeled traffic allowed by default
[    0.374411] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.374418] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.376450] Switched to clocksource hpet
[    0.381507] AppArmor: AppArmor Filesystem Enabled
[    0.381535] pnp: PnP ACPI init
[    0.381548] ACPI: bus type PNP registered
[    0.381648] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.381653] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.381679] pnp 00:01: [dma 4]
[    0.381695] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.381717] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.381817] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.381864] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.381867] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.381869] system 00:04: [io  0xffff] has been reserved
[    0.381871] system 00:04: [io  0xffff] has been reserved
[    0.381874] system 00:04: [io  0x0400-0x0453] could not be reserved
[    0.381876] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.381878] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.381880] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.381882] system 00:04: [io  0x3322-0x3323] has been reserved
[    0.381885] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.381918] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.381969] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.381972] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.382011] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.382070] pnp 00:08: Plug and Play ACPI device, IDs STU0606 PNP0f13 (active)
[    0.382136] system 00:09: [io  0x04d0-0x04d1] has been reserved
[    0.382139] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.382165] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.382408] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.382411] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.382413] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.382415] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.382418] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.382420] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.382422] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.382424] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.382426] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[    0.382429] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.382431] system 00:0b: [mem 0x7ea00000-0x7ea00fff] has been reserved
[    0.382434] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.382619] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
[    0.382621] system 00:0c: [mem 0x40004000-0x40004fff] has been reserved
[    0.382624] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.382670] pnp: PnP ACPI: found 13 devices
[    0.382671] ACPI: bus type PNP unregistered
[    0.389093] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.389110] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.389116] pci 0000:00:1c.2:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.389127] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.389130] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.389137] pci 0000:00:1c.3:   bridge window [mem 0xf7400000-0xf7dfffff]
[    0.389142] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
[    0.389150] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.389152] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.389154] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.389156] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.389158] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.389160] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[    0.389162] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff]
[    0.389164] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff]
[    0.389166] pci_bus 0000:00: resource 12 [mem 0x7ea00000-0xfeafffff]
[    0.389169] pci_bus 0000:02: resource 1 [mem 0xf7e00000-0xf7efffff]
[    0.389171] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.389173] pci_bus 0000:03: resource 1 [mem 0xf7400000-0xf7dfffff]
[    0.389175] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf09fffff 64bit pref]
[    0.389206] NET: Registered protocol family 2
[    0.389418] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.389470] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.389522] TCP: Hash tables configured (established 16384 bind 16384)
[    0.389541] TCP: reno registered
[    0.389547] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.389559] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.389610] NET: Registered protocol family 1
[    0.389623] pci 0000:00:02.0: Video device with shadowed ROM
[    0.390004] PCI: CLS 64 bytes, default 64
[    0.390065] Trying to unpack rootfs image as initramfs...
[    0.944683] Freeing initrd memory: 29304K (ffff8800346b4000 - ffff880036352000)
[    0.944689] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.944692] software IO TLB [mem 0x72800000-0x76800000] (64MB) mapped at [ffff880072800000-ffff8800767fffff]
[    0.944907] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x19
[    0.944912] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x19
[    0.944965] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.944967] Scanning for low memory corruption every 60 seconds
[    0.945180] Initialise system trusted keyring
[    0.945227] audit: initializing netlink socket (disabled)
[    0.945238] type=2000 audit(1464619643.932:1): initialized
[    0.980191] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.981309] zbud: loaded
[    0.981476] VFS: Disk quotas dquot_6.5.2
[    0.981518] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.981955] fuse init (API version 7.22)
[    0.982032] msgmni has been set to 3654
[    0.982088] Key type big_key registered
[    0.982434] Key type asymmetric registered
[    0.982437] Asymmetric key parser 'x509' registered
[    0.982468] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.982499] io scheduler noop registered
[    0.982501] io scheduler deadline registered (default)
[    0.982524] io scheduler cfq registered
[    0.982979] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.982993] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.983040] intel_idle: MWAIT substates: 0x21120
[    0.983042] intel_idle: v0.4 model 0x3A
[    0.983043] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.983109] ipmi message handler version 39.2
[    0.983144] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.983185] ACPI: AC Adapter [AC] (on-line)
[    0.983269] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.983274] ACPI: Power Button [PWRB]
[    0.983310] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.983313] ACPI: Sleep Button [SLPB]
[    0.983346] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    0.983376] ACPI: Lid Switch [LID0]
[    0.983409] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.983411] ACPI: Power Button [PWRF]
[    0.983640] thermal LNXTHERM:00: registered as thermal_zone0
[    0.983642] ACPI: Thermal Zone [TZ0] (25 C)
[    0.983666] GHES: HEST is not enabled!
[    0.983736] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.984153] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.984160] ACPI: Battery Slot [BAT0] (battery present)
[    0.985077] Linux agpgart interface v0.103
[    0.986322] brd: module loaded
[    0.986976] loop: module loaded
[    0.987307] libphy: Fixed MDIO Bus: probed
[    0.987391] tun: Universal TUN/TAP device driver, 1.6
[    0.987392] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.987430] PPP generic driver version 2.4.2
[    0.987470] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.987475] ehci-pci: EHCI PCI platform driver
[    0.987597] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.987604] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.987619] ehci-pci 0000:00:1a.0: debug port 2
[    0.991511] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.991536] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f08000
[    1.000264] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.000315] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.000317] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.000319] usb usb1: Product: EHCI Host Controller
[    1.000321] usb usb1: Manufacturer: Linux 3.13.0-86-generic ehci_hcd
[    1.000323] usb usb1: SerialNumber: 0000:00:1a.0
[    1.000505] hub 1-0:1.0: USB hub found
[    1.000516] hub 1-0:1.0: 2 ports detected
[    1.000717] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.000723] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.000737] ehci-pci 0000:00:1d.0: debug port 2
[    1.004629] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.004651] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f07000
[    1.016336] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.016427] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.016430] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.016433] usb usb2: Product: EHCI Host Controller
[    1.016435] usb usb2: Manufacturer: Linux 3.13.0-86-generic ehci_hcd
[    1.016436] usb usb2: SerialNumber: 0000:00:1d.0
[    1.016671] hub 2-0:1.0: USB hub found
[    1.016686] hub 2-0:1.0: 2 ports detected
[    1.016825] ehci-platform: EHCI generic platform driver
[    1.016837] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.016839] ohci-pci: OHCI PCI platform driver
[    1.016850] ohci-platform: OHCI generic platform driver
[    1.016856] uhci_hcd: USB Universal Host Controller Interface driver
[    1.016930] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SENM] at 0x60,0x64 irq 1,12
[    1.022780] i8042: Detected active multiplexing controller, rev 1.1
[    1.024462] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.024468] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.024494] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.024512] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.024528] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.024779] mousedev: PS/2 mouse device common for all mice
[    1.025386] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.025419] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.025482] device-mapper: uevent: version 1.0.3
[    1.025551] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.025557] ledtrig-cpu: registered to indicate activity on CPUs
[    1.025669] TCP: cubic registered
[    1.025746] NET: Registered protocol family 10
[    1.025898] NET: Registered protocol family 17
[    1.025908] Key type dns_resolver registered
[    1.026206] Loading compiled-in X.509 certificates
[    1.027332] Loaded X.509 cert 'Magrathea: Glacier signing key: aaedd612ad50173450e625b7c2eb5aa98262741e'
[    1.027348] registered taskstats version 1
[    1.028502] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.030053] Key type trusted registered
[    1.034070] Key type encrypted registered
[    1.034076] AppArmor: AppArmor sha1 policy hashing enabled
[    1.034079] IMA: No TPM chip found, activating TPM-bypass!
[    1.034373] regulator-dummy: disabling
[    1.034417]   Magic number: 0:968:789
[    1.034508] rtc_cmos 00:05: setting system clock to 2016-05-30 14:47:25 UTC (1464619645)
[    1.034853] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.034855] EDD information not available.
[    1.034911] PM: Hibernation image not present or could not be loaded.
[    1.035922] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    1.035925] Write protecting the kernel read-only data: 12288k
[    1.036280] Freeing unused kernel memory: 760K (ffff880001742000 - ffff880001800000)
[    1.038307] Freeing unused kernel memory: 680K (ffff880001b56000 - ffff880001c00000)
[    1.053916] systemd-udevd[103]: starting version 204
[    1.076848] [drm] Initialized drm 1.1.0 20060810
[    1.083555] ahci 0000:00:1f.2: version 3.0
[    1.083708] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    1.083759] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[    1.083762] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.096686] scsi0 : ahci
[    1.096784] scsi1 : ahci
[    1.100243] scsi2 : ahci
[    1.104239] scsi3 : ahci
[    1.104297] ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 40
[    1.104299] ata2: DUMMY
[    1.104301] ata3: DUMMY
[    1.104302] ata4: DUMMY
[    1.105694] [drm] Memory usable by graphics device = 2048M
[    1.107999] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.108008] r8169 0000:03:00.2: can't disable ASPM; OS doesn't have ASPM control
[    1.162186] wmi: Mapper loaded
[    1.163504] r8169 0000:03:00.2: irq 41 for MSI/MSI-X
[    1.163829] r8169 0000:03:00.2 eth0: RTL8402 at 0xffffc90000340000, 00:90:f5:f6:e6:6b, XID 04000800 IRQ 41
[    1.163983] rtsx_pci 0000:03:00.0: irq 42 for MSI/MSI-X
[    1.163999] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
[    1.180294] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    1.180308] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.180309] [drm] Driver supports precise vblank timestamp query.
[    1.180379] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.243501] fbcon: inteldrmfb (fb0) is primary device
[    1.312241] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.476614] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.476616] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.477024] hub 1-1:1.0: USB hub found
[    1.477203] hub 1-1:1.0: 4 ports detected
[    1.508191] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.514361] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.514364] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.514366] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.520478] ata1.00: ATA-8: ST160LM003 HN-M160MBB, 2AR10001, max UDMA/133
[    1.520480] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.526729] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.526731] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.526733] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.532748] ata1.00: configured for UDMA/133
[    1.532985] scsi 0:0:0:0: Direct-Access     ATA      ST160LM003 HN-M1 2AR1 PQ: 0 ANSI: 5
[    1.533178] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.533180] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.533207] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.533265] sd 0:0:0:0: [sda] Write Protect is off
[    1.533268] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.533292] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.571011]  sda: sda1 sda2 sda3 sda4
[    1.571876] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.588144] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.836192] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.836206] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.836483] hub 2-1:1.0: USB hub found
[    1.836591] hub 2-1:1.0: 4 ports detected
[    1.940407] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    1.942801] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    1.943996] tsc: Refined TSC clocksource calibration: 1795.920 MHz
[    2.152617] usb 1-1.2: New USB device found, idVendor=13ba, idProduct=0018
[    2.152619] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.152620] usb 1-1.2: Product: Barcode Reader 
[    2.156572] hidraw: raw HID events driver (C) Jiri Kosina
[    2.163634] usbcore: registered new interface driver usbhid
[    2.163635] usbhid: USB HID core driver
[    2.165573] input: Barcode Reader  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input11
[    2.165729] hid-generic 0003:13BA:0018.0001: input,hidraw0: USB HID v1.10 Keyboard [Barcode Reader ] on usb-0000:00:1a.0-1.2/input0
[    2.165952] input: Barcode Reader  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input12
[    2.166074] hid-generic 0003:13BA:0018.0002: input,hidraw1: USB HID v1.10 Mouse [Barcode Reader ] on usb-0000:00:1a.0-1.2/input1
[    2.223887] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[    2.348710] usb 2-1.3: New USB device found, idVendor=8087, idProduct=07da
[    2.348712] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.828067] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    2.939000] Console: switching to colour frame buffer device 170x48
[    2.942276] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.942278] i915 0000:00:02.0: registered panic notifier
[    2.942392] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.942809] acpi device:40: registered as cooling_device2
[    2.942870] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13
[    2.943439] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.944290] Switched to clocksource tsc
[    3.276431] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    4.029882] random: nonblocking pool is initialized
[    5.318961] psmouse serio2: sentelic: Finger Sensing Pad, hw: 14.4.1, sn: 69171, sw: 1.1.0-K
[    5.540339] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio2/input/input10
[   25.463881] Adding 10508284k swap on /dev/sda2.  Priority:-1 extents:1 across:10508284k FS
[   25.529253] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   25.659145] systemd-udevd[305]: starting version 204
[   26.120826] type=1400 audit(1464619670.590:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=386 comm="apparmor_parser"
[   26.120835] type=1400 audit(1464619670.590:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=386 comm="apparmor_parser"
[   26.120841] type=1400 audit(1464619670.590:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=386 comm="apparmor_parser"
[   26.121366] type=1400 audit(1464619670.590:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=386 comm="apparmor_parser"
[   26.121373] type=1400 audit(1464619670.590:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=386 comm="apparmor_parser"
[   26.121648] type=1400 audit(1464619670.590:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=386 comm="apparmor_parser"
[   26.222432] type=1400 audit(1464619670.690:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=617 comm="apparmor_parser"
[   26.222442] type=1400 audit(1464619670.690:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=617 comm="apparmor_parser"
[   26.222447] type=1400 audit(1464619670.690:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=617 comm="apparmor_parser"
[   26.222979] type=1400 audit(1464619670.690:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=617 comm="apparmor_parser"
[   26.681099] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
[   28.783072] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   28.894629] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   29.516743] init: failsafe main process (1043) killed by TERM signal
[   29.926372] init: idmapd main process (1126) terminated with status 1
[   29.926385] init: idmapd main process ended, respawning
[   30.113766] init: idmapd main process (1199) terminated with status 1
[   30.113780] init: idmapd main process ended, respawning
[   30.163832] init: idmapd main process (1218) terminated with status 1
[   30.163845] init: idmapd main process ended, respawning
[   30.188224] init: idmapd main process (1263) terminated with status 1
[   30.189087] init: idmapd main process ended, respawning
[   30.220049] init: idmapd main process (1280) terminated with status 1
[   30.220063] init: idmapd main process ended, respawning
[   30.239446] init: idmapd main process (1295) terminated with status 1
[   30.239456] init: idmapd main process ended, respawning
[   30.280068] init: idmapd main process (1311) terminated with status 1
[   30.280082] init: idmapd main process ended, respawning
[   30.302614] init: idmapd main process (1329) terminated with status 1
[   30.302628] init: idmapd main process ended, respawning
[   30.335277] init: idmapd main process (1365) terminated with status 1
[   30.335291] init: idmapd main process ended, respawning
[   30.369491] init: idmapd main process (1413) terminated with status 1
[   30.369505] init: idmapd main process ended, respawning
[   30.393150] init: idmapd main process (1436) terminated with status 1
[   30.393164] init: idmapd respawning too fast, stopped
[   30.664274] init: cups main process (1271) killed by HUP signal
[   30.664288] init: cups main process ended, respawning
[   30.690542] init: bluetooth main process (1464) terminated with status 1
[   30.690555] init: bluetooth main process ended, respawning
[   30.797942] init: bluetooth main process (1514) terminated with status 1
[   30.797956] init: bluetooth main process ended, respawning
[   30.824296] init: bluetooth main process (1538) terminated with status 1
[   30.824311] init: bluetooth main process ended, respawning
[   30.854936] init: bluetooth main process (1569) terminated with status 1
[   30.854951] init: bluetooth main process ended, respawning
[   30.880451] init: bluetooth main process (1598) terminated with status 1
[   30.880466] init: bluetooth main process ended, respawning
[   30.905857] init: bluetooth main process (1622) terminated with status 1
[   30.905871] init: bluetooth main process ended, respawning
[   30.934871] init: bluetooth main process (1646) terminated with status 1
[   30.934886] init: bluetooth main process ended, respawning
[   30.960673] init: bluetooth main process (1670) terminated with status 1
[   30.960688] init: bluetooth main process ended, respawning
[   30.986569] init: bluetooth main process (1694) terminated with status 1
[   30.986584] init: bluetooth main process ended, respawning
[   31.017990] init: bluetooth main process (1718) terminated with status 1
[   31.018004] init: bluetooth main process ended, respawning
[   31.046268] init: bluetooth main process (1754) terminated with status 1
[   31.046282] init: bluetooth respawning too fast, stopped
[   31.886039] init: alsa-restore main process (1857) terminated with status 19
[   32.126253] audit_printk_skb: 177 callbacks suppressed
[   32.126258] type=1400 audit(1464619676.594:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1940 comm="apparmor_parser"
[   32.161215] init: gdm main process (1864) killed by TERM signal
[   35.415310] r8169 0000:03:00.2 eth0: link down
[   35.415396] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   35.415698] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   35.452062] init: samba-ad-dc main process (2081) terminated with status 1
[   36.792779] init: plymouth-upstart-bridge main process ended, respawning
[   36.807280] init: plymouth-upstart-bridge main process ended, respawning
[   42.394573] init: plymouth-stop pre-start process (2613) terminated with status 1
[   60.787552] type=1400 audit(1464619705.267:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2798 comm="apparmor_parser"
[   60.787570] type=1400 audit(1464619705.267:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2798 comm="apparmor_parser"
[   60.788560] type=1400 audit(1464619705.271:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2798 comm="apparmor_parser"
[  108.787736] ata1.00: exception Emask 0x0 SAct 0x3c000000 SErr 0x0 action 0x6 frozen
[  108.787743] ata1.00: failed command: READ FPDMA QUEUED
[  108.787749] ata1.00: cmd 60/e0:d0:20:0b:eb/00:00:0d:00:00/40 tag 26 ncq 114688 in
[  108.787749]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  108.787752] ata1.00: status: { DRDY }
[  108.787754] ata1.00: failed command: WRITE FPDMA QUEUED
[  108.787758] ata1.00: cmd 61/80:d8:98:42:df/01:00:0c:00:00/40 tag 27 ncq 196608 out
[  108.787758]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  108.787760] ata1.00: status: { DRDY }
[  108.787762] ata1.00: failed command: READ FPDMA QUEUED
[  108.787767] ata1.00: cmd 60/08:e0:00:38:9b/00:00:07:00:00/40 tag 28 ncq 4096 in
[  108.787767]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  108.787769] ata1.00: status: { DRDY }
[  108.787771] ata1.00: failed command: READ FPDMA QUEUED
[  108.787775] ata1.00: cmd 60/00:e8:90:ad:d7/01:00:08:00:00/40 tag 29 ncq 131072 in
[  108.787775]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  108.787777] ata1.00: status: { DRDY }
[  108.787781] ata1: hard resetting link
[  109.107626] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  109.113851] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[  109.113858] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[  109.113861] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[  109.126165] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[  109.126172] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[  109.126176] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[  109.132292] ata1.00: configured for UDMA/133
[  109.147598] ata1.00: device reported invalid CHS sector 0
[  109.147604] ata1.00: device reported invalid CHS sector 0
[  109.147607] ata1.00: device reported invalid CHS sector 0
[  109.147609] ata1.00: device reported invalid CHS sector 0
[  109.147620] ata1: EH complete
[  115.562147] ata1.00: exception Emask 0x0 SAct 0x60000003 SErr 0x0 action 0x0
[  115.562153] ata1.00: irq_stat 0x40000008
[  115.562158] ata1.00: failed command: READ FPDMA QUEUED
[  115.562163] ata1.00: cmd 60/00:e8:90:ad:d7/01:00:08:00:00/40 tag 29 ncq 131072 in
[  115.562163]          res 41/40:00:38:ae:d7/00:00:08:00:00/40 Emask 0x409 (media error) <F>
[  115.562166] ata1.00: status: { DRDY ERR }
[  115.562168] ata1.00: error: { UNC }
[  115.574477] ata1.00: configured for UDMA/133
[  115.574506] sd 0:0:0:0: [sda]  
[  115.574509] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  115.574511] sd 0:0:0:0: [sda]  
[  115.574513] Sense Key : Medium Error [current] [descriptor]
[  115.574517] Descriptor sense data with sense descriptors (in hex):
[  115.574518]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  115.574527]         08 d7 ae 38 
[  115.574531] sd 0:0:0:0: [sda]  
[  115.574534] Add. Sense: Unrecovered read error - auto reallocate failed
[  115.574536] sd 0:0:0:0: [sda] CDB: 
[  115.574538] Read(10): 28 00 08 d7 ad 90 00 01 00 00
[  115.574546] end_request: I/O error, dev sda, sector 148352568
[  115.574565] ata1: EH complete
[  257.288828] r8169 0000:03:00.2 eth0: link up
[  257.288854] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
 

S'il y avait ici un moustachu qui y comprendrait quelque chose, même pour dire éventuellement que ce démarrage là est tout à fait normal, D'avance MERCI pour votre aide !

Dernière modification par Croa (Le 01/06/2016, à 13:35)

Bougron

Re : [Résolu] Démarrages lents et aléatoires

Bonbsoir
Ton instinct ne t'a pas trompé

[  115.574534] Add. Sense: Unrecovered read error - auto reallocate failed
[  115.574536] sd 0:0:0:0: [sda] CDB: 
[  115.574538] Read(10): 28 00 08 d7 ad 90 00 01 00 00
[  115.574546] end_request: I/O error, dev sda, sector 148352568

Tu vas installer l'application gsmartcontrol qui est dans la logithèque   et regarder l'état du disque, Donnes le retour de la commande

sudo smartctl   -s    on   -a /dev/sda

Dernière modification par Bougron (Le 31/05/2016, à 02:29)

malbo

Re : [Résolu] Démarrages lents et aléatoires

Une alimentation défectueuse peut donner ce genre de dmesg : http://ubuntuforums.org/showthread.php?t=2272486

Croa

Re : [Résolu] Démarrages lents et aléatoires

Merci les gars !
Impossible d'installer gsmartcontrol : J'ai des paquets défectueux !

C'est plus grave que je ne le pensait. Il doit vraiment y avoir un problème de disque

Croa

Re : [Résolu] Démarrages lents et aléatoires

J'ai redémarré le PC à partir d'un disque extérieur relié par USB !
La commande

sudo smartctl   -s    on   -a /dev/sda

donne:

 smartctl 6.2 2013-07-26 r3841 [i686-linux-3.13.0-86-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     ST160LM003 HN-M160MBB
Serial Number:    S2SYJ9GC310749
LU WWN Device Id: 5 0004cf 2072a4604
Firmware Version: 2AR10001
User Capacity:    160 041 885 696 bytes [160 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue May 31 19:57:42 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 120)	The previous self-test completed having
					the read element of the test failed.
Total time to complete Offline 
data collection: 		( 1800) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  30) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       6561
  2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time            0x0023   091   091   025    Pre-fail  Always       -       2869
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1688
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       2060
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       142
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1659
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       139
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   064   057   000    Old_age   Always       -       35 (Min/Max 11/43)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       3
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       1301
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       142
225 Load_Cycle_Count        0x0032   099   099   000    Old_age   Always       -       12175

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed: read failure       80%      1991         211589192
# 2  Extended offline    Completed: read failure       40%      1991         211589192

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed_read_failure [80% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

malbo

Re : [Résolu] Démarrages lents et aléatoires

Moi je vois ceci :

197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       3

Il faudra surveiller dans l'avenir l'évolution de la RAW_VALUE qui est de 3 actuellement - ce qui veut dire 3 secteurs en attente de réallocation - mais pour moi c'est bon. Des explications sur ce critère "Current Pending Sector Count" sont données dans cette page : https://en.wikipedia.org/wiki/S.M.A.R.T.
Et là en français : https://fr.wikipedia.org/wiki/Self-Moni … Technology

Dernière modification par malbo (Le 31/05/2016, à 20:36)

Bougron

Re : [Résolu] Démarrages lents et aléatoires

Bonsoir
Effectivement 3 secteurs dans les nuages, ce n'est pas beaucoup.   sauf si l'un est sratégique..

Reste donc la piste signalée par Malbo.   car ton boot 'normal' est quand même long et émaillé d'erreurs.
Il y a aussi la piste du câble ATA de transmission des données qui commence à être en mauvais état  ou coincé.

[  108.787736] ata1.00: exception Emask 0x0 SAct 0x3c000000 SErr 0x0 action 0x6 frozen
[  108.787743] ata1.00: failed command: READ FPDMA QUEUED
[  108.787749] ata1.00: cmd 60/e0:d0:20:0b:eb/00:00:0d:00:00/40 tag 26 ncq 114688 in
[  108.787749]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  108.787752] ata1.00: status: { DRDY }
[  108.787754] ata1.00: failed command: WRITE FPDMA QUEUED
[  108.787758] ata1.00: cmd 61/80:d8:98:42:df/01:00:0c:00:00/40 tag 27 ncq 196608 out
[  108.787758]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  108.787760] ata1.00: status: { DRDY }
[  108.787762] ata1.00: failed command: READ FPDMA QUEUED
[  108.787767] ata1.00: cmd 60/08:e0:00:38:9b/00:00:07:00:00/40 tag 28 ncq 4096 in
[  108.787767]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  108.787769] ata1.00: status: { DRDY }
[  108.787771] ata1.00: failed command: READ FPDMA QUEUED
[  108.787775] ata1.00: cmd 60/00:e8:90:ad:d7/01:00:08:00:00/40 tag 29 ncq 131072 in
[  108.787775]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  108.787777] ata1.00: status: { DRDY }

Dernière modification par Bougron (Le 31/05/2016, à 23:08)

malbo

Re : [Résolu] Démarrages lents et aléatoires

Pour ce qui est de la piste "alimentation défectueuse", il serait intéressant que tu observes si tu as les mêmes problèmes de démarrage quand le portable est branché sur secteur ou non.
Quant au câble ATA de transmission des données auquel Bougron fait allusion, tu peux déjà déconnecter le connecteur qui arrive sur le disque dur et le reconnecter pour être certain qu'il est correctement enfoncé. Aller plus loin au sujet de ce câble, ce n'est sans doute pas évident.   
Reste que tu peux remplacer provisoirement ce disque dur par un autre, y installer Ubuntu et vérifier si tu souffres des mêmes problèmes de démarrage.

Croa

Re : [Résolu] Démarrages lents et aléatoires

à malbo,

Merci pour tes conseils.
- Je peux démarrer sur disque extérieur branché sur USB et ainsi ça fonctionne nickel.

- Pour le moment je ne peux pas changer le disque interne parce que c'est un tout petit portable et que celui-ci est récent. Il lui faut un disque 2,5" avec une connexion SATA (la nouvelle norme). J'ai des disques en réserve mais IDE (ancienne norme). Pour démonter le PC ce n'est pas simple mais c'est possible. Je peux acheter un disque neuf mais il faudrait d'abord que je sois sûr à 100% que l'actuel est HS !

Croa

Re : [Résolu] Démarrages lents et aléatoires

J'ai oublié un truc : S'agissant d'un tout petit portable il n'y a pas de câble de liaison ATA. Le disque est donc directement branché apparemment sur un des cotés de la carte mère.

Le PC en cause : CLEVO W310CZ  (C'est chinois)

moko138

Re : [Résolu] Démarrages lents et aléatoires

Pour démonter le PC ce n'est pas simple mais c'est possible. Je peux acheter un disque neuf mais il faudrait d'abord que je sois sûr à 100% que l'actuel est HS !

Quatre choses :
1) Changer le disque dur d'un portable, en général, ne demande rien d'autre qu'un petit tournevis.

2) Contrairement à une clef usb, un disque dur ne meurt pas d'un coup. Ses performances se dégradent par à coups, comme celles d'une voiture, avec de temps en temps une amélioration très provisoire. Deux exemples vécus :
2.a) J'ai utilisé pendant trois ans un disque à 3 immuables "Current Pending Sectors": le plus souvent, il marchait à la perfection, et de temps en temps il se mettait en lecture seule.
  Je croyais ne pas prendre de risque, jusqu'au jour où j'ai trouvé tous mes jpg définitivement illisibles.

2.b) Je te réponds d'un autre disque, dont certaines zones sont, elles aussi, dégradées. Et bien entendu de temps en temps je trouve un fichier nouvellement devenu illisible.
  Cela n'est acceptable que si les fichiers précieux sont sauvegardés sur un autre support, sain.

3) Quand le support matériel est dégradé, il est illusoire d'espérer récupérer toutes ses données. Même à prix d'or.

4) Actuellement, on peut acheter deux disques durs, un normal plus un réservé à la sauvegarde des seules données, pour une centaine d'euros.

Dernière modification par moko138 (Le 01/06/2016, à 09:04)

---

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

malbo

Re : [Résolu] Démarrages lents et aléatoires

As-tu essayé la manip que j'ai proposée dans le post #8 :

Pour ce qui est de la piste "alimentation défectueuse", il serait intéressant que tu observes si tu as les mêmes problèmes de démarrage quand le portable est branché sur secteur ou non.

Dernière modification par malbo (Le 01/06/2016, à 09:22)

Croa

Re : [Résolu] Démarrages lents et aléatoires

À Malbo,
Non, mais ça ne peut pas venir de l'alimentation. Le PC présente les mêmes problèmes qu'il soit sur batterie ou sur alimentation secteur. Par ailleurs tout va bien si je démarre sur USB (sur un disque externe ou sur "live-CD".)  MERCI pour ton aide !
*
À Moko138,
Effectivement j'ai aussi des problèmes de ce genre. Merci pour tes infos !
*
Conclusion : Il y a plus de 9 chances sur 10 que mon disque dur soit défectueux. Je vais en acheter un autre !
Je n'ai pas de sauvegarde classique mais le portable en cause est configuré exactement comme mon PC principal et je synchronise régulièrement les /homes (ce qui équivaut à des sauvegardes.)
Le problème n'est pas résolu mais il devrait l'être assez vite (le temps d'acheter et de recevoir le nouveau disque.)
Je passe le sujet en résolu.

malbo

Re : [Résolu] Démarrages lents et aléatoires

Donne des nouvelles. On a envie de connaître la suite....

moko138

Re : [Résolu] Démarrages lents et aléatoires

+1

le portable en cause est configuré exactement comme mon PC principal et je synchronise régulièrement les /homes (ce qui équivaut à des sauvegardes.)

J'ignore la procédure.
Assure-toi - si possible - de ne pas écraser un fichier sain par un fichier plus récent mais illisible.

---

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Croa

Re : [Résolu] Démarrages lents et aléatoires

Pour la suite il faudra attendre quelques jours.

Dans l'attente il vaut mieux que je n'utilise que le PC de bureau (de toute façon je ne sort pas de chez moi ces temps-ci et le portable n'est pas indispensable.)

J'utilise Capivara pour synchroniser. Effectivement écraser les fichiers semblables par les plus récents est dangereux, surtout si une des machines est douteuse. Dans l'attente je ne synchronise plus !

À bientôt !

Croa

Re : [Résolu] Démarrages lents et aléatoires

Rebonjour,

La suite...
J'ai un disque tout neuf. Du coup j'ai beaucoup de place (le disque neuf est bien plus gros, tout simplement parce que ceux qui sont chez le marchand dès les premiers prix sont bien plus gros qu'avant !)

Les démarrages sont maintenant nickels !

J'en ai profité pour faire une mise à jour du système : Passage à xubuntu-16.04 mais là je n'aurais peut-être pas dû : J'ai un logiciel signalé cassé (qui cependant fonctionne bien quand même mais ça bloque des trucs sans rapports quand même comme les mises à jour ultérieures ; Je lance une discussion sur ce problème.)

malbo

Re : [Résolu] Démarrages lents et aléatoires

Est-ce qu'on peut conclure que le disque précédent était défectueux ou bien il y a un doute d'après toi ?

Croa

Re : [Résolu] Démarrages lents et aléatoires

Pas de doutes, il était bien défectueux !