#1 Le 16/07/2016, à 11:41
- debutant04
Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
Bonjour,
J'ai Ubuntu 16.04.
Je souhaite les données GPS d'un Garmin Foretrex 301.
Je branche via le câble USB fourni. Le GPS s'allume.
Mais je ne vois aucun dossier correspondant au GPS.
Que dois-je faire svp?
Merci d'avance.
Hors ligne
#2 Le 16/07/2016, à 12:42
- lann
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
Branche ton GPS et retourne la commande
dmesgHors ligne
#3 Le 16/07/2016, à 12:52
- debutant04
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
lann a écrit :
Branche ton GPS et retourne la commande
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-31-generic (buildd@lgw01-58) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2.1) ) #50-Ubuntu SMP Wed Jul 13 00:06:14 UTC 2016 (Ubuntu 4.4.0-31.50-generic 4.4.13)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f68ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003f690000-0x000000003f69dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003f69e000-0x000000003f6dffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003f6e0000-0x000000003f6fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: ASUSTeK Computer INC. 1001PXD/1001PXD, BIOS 0703 04/12/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3f690 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1015MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 1016MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 1015M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1015MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 1016MB, range: 8MB, type UC
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x021fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x01d54000, 0x01d54fff] PGTABLE
[ 0.000000] BRK [0x01d55000, 0x01d55fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33cec000-0x35e6dfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FBF30 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0x000000003F690100 00006C (v01 _ASUS_ Notebook 04001112 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000003F690290 0000F4 (v04 A_M_I_ OEMFACP 04001112 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000003F690490 008BD3 (v02 A1691 A1691000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 0x000000003F69E000 000040
[ 0.000000] ACPI: FACS 0x000000003F69E000 000040
[ 0.000000] ACPI: APIC 0x000000003F690390 00005C (v02 A_M_I_ OEMAPIC 04001112 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x000000003F6903F0 00003C (v01 A_M_I_ OEMMCFG 04001112 MSFT 00000097)
[ 0.000000] ACPI: ECDT 0x000000003F690430 000055 (v01 A_M_I_ OEMECDT 04001112 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000003F69E040 000061 (v01 A_M_I_ AMI_OEM 04001112 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000003F699070 000038 (v01 A_M_I_ OEMHPET 04001112 MSFT 00000097)
[ 0.000000] ACPI: GSCI 0x000000003F69E0B0 002024 (v01 A_M_I_ GMCHSCI 04001112 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x000000003F6A0C80 0004F0 (v01 PmRef CpuPm 00003000 INTL 20060113)
[ 0.000000] ACPI: SLIC 0x000000003F6990B0 000176 (v01 _ASUS_ Notebook 04001112 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 122MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x0000000037bfdfff]
[ 0.000000] HighMem [mem 0x0000000037bfe000-0x000000003f68ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000003f68ffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003f68ffff]
[ 0.000000] On node 0 totalpages: 259630
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 2190 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 31378 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics stolen memory at 0x3f800000-0x3fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e2000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 19 pages/cpu @f71b1000 s47436 r0 d30388 u77824
[ 0.000000] pcpu-alloc: s47436 r0 d30388 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257400
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-31-generic root=UUID=885bc936-dee5-4c72-aa56-1d79d3392c62 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0003f690)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 979132K/1038520K available (7887K kernel code, 767K rwdata, 3132K rodata, 948K init, 800K bss, 59388K reserved, 0K cma-reserved, 125512K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1b86000 - 0xc1c73000 ( 948 kB)
.data : 0xc17b41d3 - 0xc1b84d00 (3906 kB)
.text : 0xc1000000 - 0xc17b41d3 (7888 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:440 16
[ 0.000000] CPU 0 irqstacks, hard=f6c38000 soft=f6c3a000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 1048576 bytes of page_ext
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1666.634 MHz processor
[ 0.004020] Calibrating delay loop (skipped), value calculated using timer frequency.. 3333.26 BogoMIPS (lpj=6666536)
[ 0.004029] pid_max: default: 32768 minimum: 301
[ 0.004049] ACPI: Core revision 20150930
[ 0.024466] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.024519] Security Framework initialized
[ 0.024526] Yama: becoming mindful.
[ 0.024565] AppArmor: AppArmor initialized
[ 0.024664] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.024671] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.025097] Initializing cgroup subsys io
[ 0.025110] Initializing cgroup subsys memory
[ 0.025126] Initializing cgroup subsys devices
[ 0.025134] Initializing cgroup subsys freezer
[ 0.025142] Initializing cgroup subsys net_cls
[ 0.025149] Initializing cgroup subsys perf_event
[ 0.025157] Initializing cgroup subsys net_prio
[ 0.025165] Initializing cgroup subsys hugetlb
[ 0.025175] Initializing cgroup subsys pids
[ 0.025221] CPU: Physical Processor ID: 0
[ 0.025226] CPU: Processor Core ID: 0
[ 0.025235] mce: CPU supports 5 MCE banks
[ 0.025249] CPU0: Thermal monitoring enabled (TM2)
[ 0.025257] process: using mwait in idle threads
[ 0.025272] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[ 0.025277] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.026167] Freeing SMP alternatives memory: 28K (c1c73000 - c1c7a000)
[ 0.032018] ftrace: allocating 31282 entries in 62 pages
[ 0.052173] smpboot: Max logical packages: 2
[ 0.052181] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.052189] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.052628] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.096000] smpboot: CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz (family: 0x6, model: 0x1c, stepping: 0xa)
[ 0.096000] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
[ 0.096000] ... version: 3
[ 0.096000] ... bit width: 40
[ 0.096000] ... generic registers: 2
[ 0.096000] ... value mask: 000000ffffffffff
[ 0.096000] ... max period: 000000007fffffff
[ 0.096000] ... fixed-purpose events: 3
[ 0.096000] ... event mask: 0000000700000003
[ 0.096000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.096000] CPU 1 irqstacks, hard=f6e8e000 soft=f6e98000
[ 0.096000] x86: Booting SMP configuration:
[ 0.096000] .... node #0, CPUs: #1
[ 0.008000] Initializing CPU#1
[ 0.008000] Disabled fast string operations
[ 0.096077] x86: Booted up 1 node, 2 CPUs
[ 0.096092] smpboot: Total of 2 processors activated (6666.53 BogoMIPS)
[ 0.096672] devtmpfs: initialized
[ 0.096851] evm: security.selinux
[ 0.096856] evm: security.SMACK64
[ 0.096859] evm: security.SMACK64EXEC
[ 0.096862] evm: security.SMACK64TRANSMUTE
[ 0.096866] evm: security.SMACK64MMAP
[ 0.096869] evm: security.ima
[ 0.096872] evm: security.capability
[ 0.097103] PM: Registering ACPI NVS region [mem 0x3f69e000-0x3f6dffff] (270336 bytes)
[ 0.097387] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.097509] pinctrl core: initialized pinctrl subsystem
[ 0.097509] RTC time: 5:33:47, date: 07/16/16
[ 0.097509] NET: Registered protocol family 16
[ 0.097509] EISA bus registered
[ 0.108016] cpuidle: using governor ladder
[ 0.116015] cpuidle: using governor menu
[ 0.116025] PCCT header not found.
[ 0.116239] ACPI: bus type PCI registered
[ 0.116246] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.116448] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.116455] PCI: not using MMCONFIG
[ 0.116829] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.116897] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.116900] PCI: Using configuration type 1 for base access
[ 0.128294] ACPI: Added _OSI(Module Device)
[ 0.128301] ACPI: Added _OSI(Processor Device)
[ 0.128306] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.128311] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.133175] ACPI : EC: EC description table is found, configuring boot EC
[ 0.133197] ACPI : EC: EC started
[ 0.136831] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.144787] ACPI: Dynamic OEM Table Load:
[ 0.144804] ACPI: SSDT 0x00000000F6E46400 000326 (v01 PmRef Cpu0Ist 00003000 INTL 20060113)
[ 0.148679] ACPI: Dynamic OEM Table Load:
[ 0.148698] ACPI: SSDT 0x00000000F6C11800 000724 (v01 PmRef Cpu0Cst 00003001 INTL 20060113)
[ 0.150526] ACPI: Dynamic OEM Table Load:
[ 0.150538] ACPI: SSDT 0x00000000F6CCEA80 0000AB (v01 PmRef Cpu1Ist 00003000 INTL 20060113)
[ 0.151550] ACPI: Dynamic OEM Table Load:
[ 0.151562] ACPI: SSDT 0x00000000F6CCEB40 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20060113)
[ 0.153225] ACPI: Interpreter enabled
[ 0.153253] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.153264] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.153302] ACPI: (supports S0 S3 S4 S5)
[ 0.153307] ACPI: Using IOAPIC for interrupt routing
[ 0.153399] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.155289] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.155294] PCI: Using MMCONFIG for extended config space
[ 0.155308] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.168030] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.171603] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.171619] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.171635] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.172202] PCI host bridge to bus 0000:00
[ 0.172213] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.172220] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.172226] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.172233] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.172239] pci_bus 0000:00: root bus resource [mem 0x3f700000-0xfed8ffff window]
[ 0.172246] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.172266] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
[ 0.172495] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
[ 0.172518] pci 0000:00:02.0: reg 0x10: [mem 0xf7e00000-0xf7e7ffff]
[ 0.172530] pci 0000:00:02.0: reg 0x14: [io 0xdc00-0xdc07]
[ 0.172541] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[ 0.172552] pci 0000:00:02.0: reg 0x1c: [mem 0xf7d00000-0xf7dfffff]
[ 0.172786] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
[ 0.172806] pci 0000:00:02.1: reg 0x10: [mem 0xf7e80000-0xf7efffff]
[ 0.173065] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.173109] pci 0000:00:1b.0: reg 0x10: [mem 0xf7cf8000-0xf7cfbfff 64bit]
[ 0.173209] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.173414] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.173522] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.173639] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.173769] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.173882] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.173997] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.174123] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[ 0.174237] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.174351] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.174477] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.174539] pci 0000:00:1d.0: reg 0x20: [io 0xd400-0xd41f]
[ 0.174759] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.174821] pci 0000:00:1d.1: reg 0x20: [io 0xd480-0xd49f]
[ 0.175053] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.175116] pci 0000:00:1d.2: reg 0x20: [io 0xd800-0xd81f]
[ 0.175340] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.175402] pci 0000:00:1d.3: reg 0x20: [io 0xd880-0xd89f]
[ 0.175632] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.175672] pci 0000:00:1d.7: reg 0x10: [mem 0xf7cf7c00-0xf7cf7fff]
[ 0.175775] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.176011] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.176180] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.176307] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[ 0.176637] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[ 0.176675] pci 0000:00:1f.2: reg 0x10: [io 0xd080-0xd087]
[ 0.176691] pci 0000:00:1f.2: reg 0x14: [io 0xd000-0xd003]
[ 0.176706] pci 0000:00:1f.2: reg 0x18: [io 0xcc00-0xcc07]
[ 0.176721] pci 0000:00:1f.2: reg 0x1c: [io 0xc880-0xc883]
[ 0.176736] pci 0000:00:1f.2: reg 0x20: [io 0xc800-0xc81f]
[ 0.176752] pci 0000:00:1f.2: reg 0x24: [mem 0xf7cf7800-0xf7cf7bff]
[ 0.176805] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.177017] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.177090] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.177391] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.177522] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[ 0.177583] pci 0000:02:00.0: reg 0x10: [mem 0xfbff0000-0xfbffffff 64bit]
[ 0.177729] pci 0000:02:00.0: supports D1
[ 0.177735] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.184038] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[ 0.184051] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.184063] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.184195] pci 0000:01:00.0: [1969:2062] type 00 class 0x020000
[ 0.184256] pci 0000:01:00.0: reg 0x10: [mem 0xf7fc0000-0xf7ffffff 64bit]
[ 0.184277] pci 0000:01:00.0: reg 0x18: [io 0xec00-0xec7f]
[ 0.184407] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192033] pci 0000:00:1c.3: PCI bridge to [bus 01]
[ 0.192043] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.192052] pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.192196] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.192214] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.192221] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.192227] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.192234] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.192240] pci 0000:00:1e.0: bridge window [mem 0x3f700000-0xfed8ffff window] (subtractive decode)
[ 0.192273] pci_bus 0000:00: on NUMA node 0
[ 0.194049] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.194228] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.194402] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.194576] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.194749] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.194924] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.195098] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.195272] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.195525] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.195691] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.196031] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.196038] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.196049] vgaarb: loaded
[ 0.196054] vgaarb: bridge control possible 0000:00:02.0
[ 0.196905] SCSI subsystem initialized
[ 0.197008] libata version 3.00 loaded.
[ 0.197008] ACPI: bus type USB registered
[ 0.197008] usbcore: registered new interface driver usbfs
[ 0.197008] usbcore: registered new interface driver hub
[ 0.197008] usbcore: registered new device driver usb
[ 0.197008] PCI: Using ACPI for IRQ routing
[ 0.197008] PCI: pci_cache_line_size set to 64 bytes
[ 0.197008] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.197008] e820: reserve RAM buffer [mem 0x3f690000-0x3fffffff]
[ 0.197008] NetLabel: Initializing
[ 0.197008] NetLabel: domain hash size = 128
[ 0.197008] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.197008] NetLabel: unlabeled traffic allowed by default
[ 0.197008] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.197008] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.197008] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.200054] clocksource: Switched to clocksource hpet
[ 0.220313] AppArmor: AppArmor Filesystem Enabled
[ 0.220501] pnp: PnP ACPI init
[ 0.220699] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.220709] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.220721] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.220898] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.221061] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.221508] system 00:03: [io 0x025c-0x025f] has been reserved
[ 0.221517] system 00:03: [io 0x0380-0x0383] has been reserved
[ 0.221525] system 00:03: [io 0x0400-0x041f] has been reserved
[ 0.221532] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.221539] system 00:03: [io 0x0800-0x087f] could not be reserved
[ 0.221546] system 00:03: [io 0x0480-0x04bf] has been reserved
[ 0.221554] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.221562] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.221569] system 00:03: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.221576] system 00:03: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.221584] system 00:03: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.221594] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.221901] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.221910] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.221920] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.222071] pnp 00:05: Plug and Play ACPI device, IDs ETD0100 SYN0a00 SYN0002 PNP0f13 (active)
[ 0.222251] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.222262] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.222854] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.222863] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.222870] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.222878] system 00:07: [mem 0x00100000-0x3f6fffff] could not be reserved
[ 0.222885] system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.222896] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.223362] pnp: PnP ACPI: found 8 devices
[ 0.223378] PnPBIOS: Disabled by ACPI PNP
[ 0.265028] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.265074] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.265085] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 0.265094] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[ 0.265110] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000
[ 0.265128] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.265156] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.265163] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.265171] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.265179] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.265186] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.265194] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.265201] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.265209] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.265216] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.265223] pci 0000:00:1c.1: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.265239] pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
[ 0.265256] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
[ 0.265271] pci 0000:00:1c.3: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
[ 0.265281] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.265290] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.265300] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.265308] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.265319] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff]
[ 0.265328] pci 0000:00:1c.0: bridge window [mem 0x40200000-0x403fffff 64bit pref]
[ 0.265340] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[ 0.265347] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.265357] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.265366] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.265378] pci 0000:00:1c.3: PCI bridge to [bus 01]
[ 0.265385] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.265395] pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.265404] pci 0000:00:1c.3: bridge window [mem 0x40400000-0x405fffff 64bit pref]
[ 0.265416] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.265436] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.265443] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.265449] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.265456] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.265462] pci_bus 0000:00: resource 8 [mem 0x3f700000-0xfed8ffff window]
[ 0.265468] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.265474] pci_bus 0000:04: resource 1 [mem 0x40000000-0x401fffff]
[ 0.265481] pci_bus 0000:04: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[ 0.265487] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.265493] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.265500] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.265506] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.265512] pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.265518] pci_bus 0000:01: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
[ 0.265525] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.265531] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.265538] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.265544] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.265550] pci_bus 0000:05: resource 8 [mem 0x3f700000-0xfed8ffff window]
[ 0.265625] NET: Registered protocol family 2
[ 0.266041] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.266088] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.266144] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.266192] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.266210] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.266319] NET: Registered protocol family 1
[ 0.266361] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.267575] PCI: CLS 32 bytes, default 64
[ 0.267747] Trying to unpack rootfs image as initramfs...
[ 1.771939] Freeing initrd memory: 34312K (f3cec000 - f5e6e000)
[ 1.772418] Scanning for low memory corruption every 60 seconds
[ 1.773472] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.773531] audit: initializing netlink subsys (disabled)
[ 1.773576] audit: type=2000 audit(1468647227.772:1): initialized
[ 1.774529] Initialise system trusted keyring
[ 1.774835] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.779606] zbud: loaded
[ 1.779939] VFS: Disk quotas dquot_6.6.0
[ 1.780093] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.780842] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.781618] fuse init (API version 7.23)
[ 1.782195] Key type big_key registered
[ 1.782246] Allocating IMA MOK and blacklist keyrings.
[ 1.783359] Key type asymmetric registered
[ 1.783370] Asymmetric key parser 'x509' registered
[ 1.783417] bounce: pool size: 64 pages
[ 1.783531] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.783629] io scheduler noop registered
[ 1.783638] io scheduler deadline registered (default)
[ 1.783776] io scheduler cfq registered
[ 1.784219] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 1.784581] pcieport 0000:00:1c.1: enabling device (0106 -> 0107)
[ 1.785208] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.785238] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.785364] vesafb: mode is 800x600x32, linelength=3200, pages=0
[ 1.785369] vesafb: scrolling: redraw
[ 1.785375] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.785415] vesafb: framebuffer at 0xd0000000, mapped to 0xf8600000, using 1920k, total 1920k
[ 1.785758] Console: switching to colour frame buffer device 100x37
[ 1.785793] fb0: VESA VGA frame buffer device
[ 1.785863] intel_idle: MWAIT substates: 0x20220
[ 1.785879] intel_idle: v0.4.1 model 0x1C
[ 1.785884] intel_idle: lapic_timer_reliable_states 0x2
[ 1.785898] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 1.786371] ACPI: AC Adapter [AC0] (on-line)
[ 1.786623] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.791216] ACPI: Lid Switch [LID]
[ 1.791400] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.791410] ACPI: Sleep Button [SLPB]
[ 1.791575] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.791584] ACPI: Power Button [PWRB]
[ 1.791746] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.791754] ACPI: Power Button [PWRF]
[ 1.807912] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.807919] ACPI: Thermal Zone [TZ00] (41 C)
[ 1.808085] GHES: HEST is not enabled!
[ 1.808457] isapnp: Scanning for PnP cards...
[ 1.808700] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.817675] Linux agpgart interface v0.103
[ 1.817934] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 1.817983] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.818079] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.818388] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.844928] brd: module loaded
[ 1.852274] loop: module loaded
[ 1.853508] libphy: Fixed MDIO Bus: probed
[ 1.853520] tun: Universal TUN/TAP device driver, 1.6
[ 1.853525] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.853775] PPP generic driver version 2.4.2
[ 1.854070] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.854087] ehci-pci: EHCI PCI platform driver
[ 1.854389] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.854413] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.854440] ehci-pci 0000:00:1d.7: debug port 1
[ 1.858386] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.858677] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7cf7c00
[ 1.868655] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.868850] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.868860] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.868868] usb usb1: Product: EHCI Host Controller
[ 1.868875] usb usb1: Manufacturer: Linux 4.4.0-31-generic ehci_hcd
[ 1.868882] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.869509] hub 1-0:1.0: USB hub found
[ 1.869539] hub 1-0:1.0: 8 ports detected
[ 1.871262] ehci-platform: EHCI generic platform driver
[ 1.871333] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.871352] ohci-pci: OHCI PCI platform driver
[ 1.871418] ohci-platform: OHCI generic platform driver
[ 1.871467] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.871706] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.871730] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.871748] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.871786] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 1.872045] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.872054] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.872062] usb usb2: Product: UHCI Host Controller
[ 1.872069] usb usb2: Manufacturer: Linux 4.4.0-31-generic uhci_hcd
[ 1.872076] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.872717] hub 2-0:1.0: USB hub found
[ 1.872747] hub 2-0:1.0: 2 ports detected
[ 1.873832] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.873856] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.873874] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.873941] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[ 1.874152] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.874162] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.874169] usb usb3: Product: UHCI Host Controller
[ 1.874176] usb usb3: Manufacturer: Linux 4.4.0-31-generic uhci_hcd
[ 1.874183] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.874829] hub 3-0:1.0: USB hub found
[ 1.874858] hub 3-0:1.0: 2 ports detected
[ 1.875650] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.875678] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.875696] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.875759] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 1.875973] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.875983] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.875990] usb usb4: Product: UHCI Host Controller
[ 1.875997] usb usb4: Manufacturer: Linux 4.4.0-31-generic uhci_hcd
[ 1.876040] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.876665] hub 4-0:1.0: USB hub found
[ 1.876695] hub 4-0:1.0: 2 ports detected
[ 1.877453] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.877476] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.877493] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.877560] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[ 1.877768] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.877777] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.877784] usb usb5: Product: UHCI Host Controller
[ 1.877792] usb usb5: Manufacturer: Linux 4.4.0-31-generic uhci_hcd
[ 1.877799] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.878462] hub 5-0:1.0: USB hub found
[ 1.878491] hub 5-0:1.0: 2 ports detected
[ 1.879402] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.905404] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.905477] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.906245] mousedev: PS/2 mouse device common for all mice
[ 1.907132] rtc_cmos 00:01: RTC can wake from S4
[ 1.907465] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.907514] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.907560] i2c /dev entries driver
[ 1.907891] device-mapper: uevent: version 1.0.3
[ 1.908322] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.908454] platform eisa.0: Probing EISA bus 0
[ 1.908465] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.908475] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.908484] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.908493] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.908503] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.908512] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.908521] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.908530] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.908539] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.908547] platform eisa.0: EISA: Detected 0 cards
[ 1.908593] cpufreq-nforce2: No nForce2 chipset.
[ 1.908617] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.909929] NET: Registered protocol family 10
[ 1.910799] NET: Registered protocol family 17
[ 1.910838] Key type dns_resolver registered
[ 1.911737] microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x107
[ 1.911761] microcode: CPU1 sig=0x106ca, pf=0x4, revision=0x107
[ 1.911923] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.911959] Using IPI No-Shortcut mode
[ 1.913106] registered taskstats version 1
[ 1.913158] Loading compiled-in X.509 certificates
[ 1.924781] Loaded X.509 cert 'Build time autogenerated kernel key: cb6840fabcbd1bdef376e0ee9ee79560852e9a80'
[ 1.924855] zswap: loaded using pool lzo/zbud
[ 1.931276] ACPI: Battery Slot [BAT0] (battery present)
[ 1.933248] Key type trusted registered
[ 1.943183] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.949936] Key type encrypted registered
[ 1.949960] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.949972] ima: No TPM chip found, activating TPM-bypass!
[ 1.950052] evm: HMAC attrs: 0x1
[ 1.950874] Magic number: 8:764:567
[ 1.950893] misc network_latency: hash matches
[ 1.951053] rtc_cmos 00:01: setting system clock to 2016-07-16 05:33:49 UTC (1468647229)
[ 1.952548] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.952554] EDD information not available.
[ 1.952797] PM: Hibernation image not present or could not be loaded.
[ 2.119449] isapnp: No Plug & Play device found
[ 2.120271] Freeing unused kernel memory: 948K (c1b86000 - c1c73000)
[ 2.120486] Write protecting the kernel text: 7892k
[ 2.120583] Write protecting the kernel read-only data: 3136k
[ 2.120588] NX-protecting the kernel data: 6444k
[ 2.155564] random: systemd-udevd urandom read with 3 bits of entropy available
[ 2.180094] usb 1-6: new high-speed USB device number 2 using ehci-pci
[ 2.332448] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 2.378520] wmi: Mapper loaded
[ 2.415154] usb 1-6: New USB device found, idVendor=13d3, idProduct=5711
[ 2.415166] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.415174] usb 1-6: Product: USB 2.0 UVC VGA WebCam
[ 2.415182] usb 1-6: Manufacturer: Azurewave
[ 2.415189] usb 1-6: SerialNumber: 0x0001
[ 2.431307] [drm] Initialized drm 1.1.0 20060810
[ 2.489074] ahci 0000:00:1f.2: version 3.0
[ 2.489484] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[ 2.489497] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 2.496416] scsi host0: ahci
[ 2.504159] scsi host1: ahci
[ 2.509821] atl1c 0000:01:00.0: version 1.0.1.1-NAPI
[ 2.512122] scsi host2: ahci
[ 2.520413] scsi host3: ahci
[ 2.520679] ata1: SATA max UDMA/133 abar m1024@0xf7cf7800 port 0xf7cf7900 irq 27
[ 2.520687] ata2: DUMMY
[ 2.520693] ata3: DUMMY
[ 2.520698] ata4: DUMMY
[ 2.772075] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x180607b37ad, max_idle_ns: 440795288115 ns
[ 2.807286] atl1c 0000:01:00.0 enp1s0: renamed from eth0
[ 2.818591] [drm] Memory usable by graphics device = 512M
[ 2.818606] checking generic (d0000000 1e0000) vs hw (d0000000 10000000)
[ 2.818613] fb: switching to inteldrmfb from VESA VGA
[ 2.818705] Console: switching to colour dummy device 80x25
[ 2.819012] [drm] Replacing VGA console driver
[ 2.825587] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.825594] [drm] Driver supports precise vblank timestamp query.
[ 2.827751] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.852187] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.853347] ata1.00: unexpected _GTF length (8)
[ 2.906516] ata1.00: ATA-8: ST9320325AS, 0003SDM1, max UDMA/133
[ 2.906529] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.908464] ata1.00: unexpected _GTF length (8)
[ 2.908807] ata1.00: configured for UDMA/133
[ 2.909181] scsi 0:0:0:0: Direct-Access ATA ST9320325AS SDM1 PQ: 0 ANSI: 5
[ 2.910509] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.910767] sd 0:0:0:0: [sda] Write Protect is off
[ 2.910780] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.910892] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.912052] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.915563] [drm] initialized overlay support
[ 2.916161] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 2.927711] acpi device:2b: registered as cooling_device2
[ 2.928149] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 2.928494] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 2.937562] fbcon: inteldrmfb (fb0) is primary device
[ 2.937850] Console: switching to colour frame buffer device 128x37
[ 2.937926] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.957810] sda: sda1 sda2 < sda5 >
[ 2.959290] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.621983] psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x140200)
[ 3.683843] psmouse serio1: elantech: Synaptics capabilities query result 0x48, 0x14, 0x0b.
[ 3.745822] psmouse serio1: elantech: Elan sample query result 02, 80, 80
[ 3.853320] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.052112] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[ 4.566457] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[ 4.959908] random: nonblocking pool is initialized
[ 5.268105] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[ 5.581639] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 5.582065] systemd[1]: Detected architecture x86.
[ 5.613441] systemd[1]: Set hostname to <gilbert-1001PXD>.
[ 5.899105] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[ 7.060935] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.061388] systemd[1]: Created slice User and Session Slice.
[ 7.061575] systemd[1]: Listening on udev Control Socket.
[ 7.061683] systemd[1]: Listening on udev Kernel Socket.
[ 7.061813] systemd[1]: Listening on Syslog Socket.
[ 7.062116] systemd[1]: Created slice System Slice.
[ 7.062271] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 7.062329] systemd[1]: Reached target Encrypted Volumes.
[ 7.062452] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.062615] systemd[1]: Listening on Journal Socket.
[ 7.080697] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.220602] systemd[1]: Starting Load Kernel Modules...
[ 7.223170] systemd[1]: Mounting Debug File System...
[ 7.225982] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.228587] systemd[1]: Mounting Huge Pages File System...
[ 7.228920] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.236326] systemd[1]: Starting Uncomplicated firewall...
[ 7.238688] systemd[1]: Starting Set console keymap...
[ 7.238809] systemd[1]: Reached target User and Group Name Lookups.
[ 7.287678] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.304551] systemd[1]: Started Read required files in advance.
[ 7.307435] systemd[1]: Started Braille Device Support.
[ 7.307849] systemd[1]: Reached target Slices.
[ 7.308080] systemd[1]: Reached target Remote File Systems (Pre).
[ 7.308178] systemd[1]: Reached target Remote File Systems.
[ 7.308567] systemd[1]: Listening on Journal Audit Socket.
[ 7.311183] systemd[1]: Starting Journal Service...
[ 7.319898] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 7.480586] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 7.596295] systemd[1]: Started Uncomplicated firewall.
[ 8.085801] systemd[1]: Started Journal Service.
[ 8.133161] lp: driver loaded but no devices found
[ 8.326453] ppdev: user-space parallel port driver
[ 10.463250] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 11.208642] systemd-journald[220]: Received request to flush runtime journal from PID 1
[ 12.103243] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.210260] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\PMIO) (20150930/utaddress-254)
[ 12.210286] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x000000000000082F (\_SB_.PCI0.SBRG.IELK.GPSE) (20150930/utaddress-254)
[ 12.210303] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.210315] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004BF (\_SB_.PCI0.SBRG.GPBX) (20150930/utaddress-254)
[ 12.210332] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.210339] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004BF (\_SB_.PCI0.SBRG.GPBX) (20150930/utaddress-254)
[ 12.210356] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.210362] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 13.200459] media: Linux media interface: v0.10
[ 13.671618] asus_wmi: ASUS WMI generic driver loaded
[ 13.708940] Linux video capture interface: v2.00
[ 13.759447] asus_wmi: Initialization: 0x0
[ 13.759557] asus_wmi: BIOS WMI version: 0.6
[ 13.759749] asus_wmi: SFUN value: 0x0
[ 13.767868] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8
[ 13.772690] asus_wmi: Number of fans: 1
[ 14.762405] Adding 1037308k swap on /dev/sda5. Priority:-1 extents:1 across:1037308k FS
[ 14.923873] uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam (13d3:5711)
[ 14.963532] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 14.963546] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 14.963556] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1a/0x0/0x0/0x0/0x0)
[ 14.963564] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 14.963571] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 14.963580] snd_hda_codec_realtek hdaudioC0D0: Mic=0x12
[ 14.999070] input: HDA Intel Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 15.031095] input: USB 2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input10
[ 15.031502] usbcore: registered new interface driver uvcvideo
[ 15.031511] USB Video Class driver (1.1.1)
[ 15.492673] ath: phy0: ASPM enabled: 0x42
[ 15.492687] ath: EEPROM regdomain: 0x60
[ 15.492692] ath: EEPROM indicates we should expect a direct regpair map
[ 15.492700] ath: Country alpha2 being used: 00
[ 15.492705] ath: Regpair used: 0x60
[ 15.562065] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 15.563940] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8980000, irq=17
[ 15.702336] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 15.927329] cfg80211: World regulatory domain updated:
[ 15.927339] cfg80211: DFS Master region: unset
[ 15.927343] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 15.927350] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.927355] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.927361] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.927367] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 15.927374] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 15.927380] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 15.927385] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.927391] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 18.025414] audit: type=1400 audit(1468647245.572:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=567 comm="apparmor_parser"
[ 18.025449] audit: type=1400 audit(1468647245.572:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=567 comm="apparmor_parser"
[ 18.025480] audit: type=1400 audit(1468647245.572:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=567 comm="apparmor_parser"
[ 18.025510] audit: type=1400 audit(1468647245.572:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=567 comm="apparmor_parser"
[ 18.035526] audit: type=1400 audit(1468647245.580:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=566 comm="apparmor_parser"
[ 18.035565] audit: type=1400 audit(1468647245.580:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=566 comm="apparmor_parser"
[ 18.066543] audit: type=1400 audit(1468647245.612:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=570 comm="apparmor_parser"
[ 18.164219] audit: type=1400 audit(1468647245.712:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=568 comm="apparmor_parser"
[ 18.164259] audit: type=1400 audit(1468647245.712:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=568 comm="apparmor_parser"
[ 18.164287] audit: type=1400 audit(1468647245.712:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=568 comm="apparmor_parser"
[ 31.081549] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 31.102584] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 31.447304] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 31.462456] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 32.948625] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 60.636371] wlp2s0: authenticate with 6c:38:a1:00:75:a8
[ 60.684244] wlp2s0: send auth to 6c:38:a1:00:75:a8 (try 1/3)
[ 60.686058] wlp2s0: authenticated
[ 60.704088] wlp2s0: associate with 6c:38:a1:00:75:a8 (try 1/3)
[ 60.707953] wlp2s0: RX AssocResp from 6c:38:a1:00:75:a8 (capab=0xc11 status=0 aid=1)
[ 60.708162] wlp2s0: associated
[ 60.708296] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 66.090396] cfg80211: World regulatory domain updated:
[ 66.090408] cfg80211: DFS Master region: unset
[ 66.090414] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 66.090423] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 66.090431] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 66.090438] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 66.090447] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 66.090456] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 66.090464] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 66.090471] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 66.090479] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 72.441985] perf interrupt took too long (2520 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 154.219235] perf interrupt took too long (5023 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[13790.760118] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[13790.911543] usb 2-1: New USB device found, idVendor=091e, idProduct=23fc
[13790.911557] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=5
[13790.911567] usb 2-1: SerialNumber: 0000e3c3d205
[13793.355845] usb-storage 2-1:1.0: USB Mass Storage device detected
[13793.357647] scsi host4: usb-storage 2-1:1.0
[13793.358576] usbcore: registered new interface driver usb-storage
[13793.463772] usbcore: registered new interface driver uas
[13794.360322] scsi 4:0:0:0: Direct-Access Garmin ForeTrex 301 Dri 1.00 PQ: 0 ANSI: 5
[13794.361965] sd 4:0:0:0: Attached scsi generic sg1 type 0
[13794.379324] sd 4:0:0:0: [sdb] 8704 512-byte logical blocks: (4.46 MB/4.25 MiB)
[13794.382328] sd 4:0:0:0: [sdb] Write Protect is off
[13794.382349] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[13794.385311] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[13794.470374] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[13885.192226] usb 2-1: USB disconnect, device number 2
[13885.200217] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
[13885.200410] sd 4:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[13895.440089] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[13895.598126] usb 3-1: New USB device found, idVendor=091e, idProduct=23fc
[13895.598140] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=5
[13895.598151] usb 3-1: SerialNumber: 0000e3c3d205
[13895.601385] usb-storage 3-1:1.0: USB Mass Storage device detected
[13895.624110] scsi host5: usb-storage 3-1:1.0
[13896.635168] scsi 5:0:0:0: Direct-Access Garmin ForeTrex 301 Dri 1.00 PQ: 0 ANSI: 5
[13896.644304] sd 5:0:0:0: Attached scsi generic sg1 type 0
[13896.657177] sd 5:0:0:0: [sdb] 8704 512-byte logical blocks: (4.46 MB/4.25 MiB)
[13896.661129] sd 5:0:0:0: [sdb] Write Protect is off
[13896.661145] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00
[13896.665664] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[13896.760169] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[13946.448239] usb 3-1: USB disconnect, device number 2
[13946.449676] sd 5:0:0:0: [sdb] Synchronizing SCSI cache
[13946.449841] sd 5:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[18861.572148] usb 3-1: new full-speed USB device number 3 using uhci_hcd
[18861.729176] usb 3-1: New USB device found, idVendor=091e, idProduct=23fc
[18861.729196] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=5
[18861.729203] usb 3-1: SerialNumber: 0000e3c3d205
[18861.732699] usb-storage 3-1:1.0: USB Mass Storage device detected
[18861.732991] scsi host6: usb-storage 3-1:1.0
[18862.737207] scsi 6:0:0:0: Direct-Access Garmin ForeTrex 301 Dri 1.00 PQ: 0 ANSI: 5
[18862.738221] sd 6:0:0:0: Attached scsi generic sg1 type 0
[18862.747157] sd 6:0:0:0: [sdb] 8704 512-byte logical blocks: (4.46 MB/4.25 MiB)
[18862.750164] sd 6:0:0:0: [sdb] Write Protect is off
[18862.750178] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[18862.753203] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[18862.837195] sd 6:0:0:0: [sdb] Attached SCSI removable diskDernière modification par debutant04 (Le 16/07/2016, à 13:44)
Hors ligne
#4 Le 16/07/2016, à 13:32
- Compte supprimé
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
Bonjour,
Tu devrais commencer par rendre ton dernier message plus lisible en mettant le retour de la commande entre balises "code".
Comme expliqué ici
https://forum.ubuntu-fr.org/viewtopic.p … #p17345641
On voit, vers la fin de dmesg, que ton appareil est bien reconnu. As-tu paramétré un montage automatique des disques externes ?
Hier j'ai fait la même chose que toi avec un Forerunner225, la mémoire interne de la montre s'est bien affichée. Par contre les fichiers me semblent être dans un format propriétaire dont l'extension est .FIT.
Cela demande certainement une conversion pour être lisible par un logiciel de cartographie comme Viking ou autre.
Dernière modification par Compte supprimé (Le 16/07/2016, à 13:39)
#5 Le 16/07/2016, à 13:52
- debutant04
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
Tamarou a écrit :
On voit, vers la fin de dmesg, que ton appareil est bien reconnu. As-tu paramétré un montage automatique des disques externes ?
Non. Je n'ai rien paramétré du tout. J'ai installé Ubuntu.
Quand je mets une clé USB, son contenu s'affiche dans un dossier.
Hors ligne
#6 Le 16/07/2016, à 18:28
- lann
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
Installes gpsbabel
sudo apt-get install gpsbabelet essayes cette commande :
gpsbabel -t -w -i garmin -f /dev/ttyUSB0 -o gpx -F garmin_downloaded.gpxTu devrais avoir un fichier garmin_downloaded.gpx dans ton dossier home avec les traces gps
Pour afficher ces traces tu peux effectivement utiliser le logiciel Viking
Dernière modification par lann (Le 16/07/2016, à 18:29)
Hors ligne
#7 Le 16/07/2016, à 18:47
- debutant04
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
lann a écrit :
Installes gpsbabel
sudo apt-get install gpsbabelet essayes cette commande :
gpsbabel -t -w -i garmin -f /dev/ttyUSB0 -o gpx -F garmin_downloaded.gpxTu devrais avoir un fichier garmin_downloaded.gpx dans ton dossier home avec les traces gps
J'obtiens ceci
[ERROR] XSERIAL: Cannot open serial port '/dev/ttyUSB0': No such file or directory
[ERROR] Cannot open serial port '/dev/ttyUSB0'
GARMIN:Can't init /dev/ttyUSB0Hors ligne
#8 Le 17/07/2016, à 09:59
- lann
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
A première vue, ce ne serait pas en péréphérique USB qu'il est reconnu mais en disque dur :
[13790.760118] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[13790.911543] usb 2-1: New USB device found, idVendor=091e, idProduct=23fc
[13790.911557] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=5
[13790.911567] usb 2-1: SerialNumber: 0000e3c3d205
[13793.355845] usb-storage 2-1:1.0: USB Mass Storage device detected
[13793.357647] scsi host4: usb-storage 2-1:1.0
[13793.358576] usbcore: registered new interface driver usb-storage
[13793.463772] usbcore: registered new interface driver uas
[13794.360322] scsi 4:0:0:0: Direct-Access Garmin ForeTrex 301 Dri 1.00 PQ: 0 ANSI: 5
[13794.361965] sd 4:0:0:0: Attached scsi generic sg1 type 0
[13794.379324] sd 4:0:0:0: [sdb] 8704 512-byte logical blocks: (4.46 MB/4.25 MiB)
[13794.382328] sd 4:0:0:0: [sdb] Write Protect is off
[13794.382349] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[13794.385311] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[13794.470374] sd 4:0:0:0: [sdb] Attached SCSI removable disksi tu pouvais donner la sortie des commandes
df -h
sudo fdisk -lune fois que le GPS est connecté
Hors ligne
#9 Le 17/07/2016, à 11:14
- debutant04
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
lann a écrit :
si tu pouvais donner la sortie des commandes
df -h sudo fdisk -lune fois que le GPS est connecté
~$ df -h
Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
udev 479M 0 479M 0% /dev
tmpfs 100M 5,0M 95M 5% /run
/dev/sda1 293G 5,9G 272G 3% /
tmpfs 496M 1,5M 494M 1% /dev/shm
tmpfs 5,0M 4,0K 5,0M 1% /run/lock
tmpfs 496M 0 496M 0% /sys/fs/cgroup
tmpfs 100M 56K 100M 1% /run/user/1000~$ sudo fdisk -l
[sudo] Mot de passe de ****** :
Disque /dev/ram0 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram1 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram2 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram3 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram4 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram5 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram6 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram7 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram8 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram9 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram10 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram11 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram12 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram13 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram14 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/ram15 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/sda : 298,1 GiB, 320072933376 octets, 625142448 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x306f74eb
Périphérique Amorçage Start Fin Secteurs Size Id Type
/dev/sda1 * 2048 623065087 623063040 297,1G 83 Linux
/dev/sda2 623067134 625141759 2074626 1013M 5 Étendue
/dev/sda5 623067136 625141759 2074624 1013M 82 partition d'échang
Disque /dev/sdb : 4,3 MiB, 4456448 octets, 8704 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytesHors ligne
#10 Le 17/07/2016, à 12:54
- lann
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
Donc ça bien l'air d'être /dev/sdb ton GPS.
Maintenant on va le monter sur un répertoire :
Création d'un répertoire :
mkdir GPSMontage de la partition du GPS dans le répertoire :
sudo mount /dev/sdb GPSEt tu devrais avoir tes fichiers du GPS dans le dossier GPS de ton home
Hors ligne
#11 Le 17/07/2016, à 13:42
- debutant04
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
lann a écrit :
Donc ça bien l'air d'être /dev/sdb ton GPS.
Maintenant on va le monter sur un répertoire :Création d'un répertoire :
mkdir GPSMontage de la partition du GPS dans le répertoire :
sudo mount /dev/sdb GPSEt tu devrais avoir tes fichiers du GPS dans le dossier GPS de ton home
J'obtiens
mount: wrong fs type, bad option, bad superblock on /dev/sdb,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.Hors ligne
#12 Le 17/07/2016, à 20:03
- lann
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
Tu peux montrer le retour de
dmesg | tailjuste après avoir essayé de monter le GPS
Hors ligne
#13 Le 17/07/2016, à 20:13
- debutant04
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
lann a écrit :
Tu peux montrer le retour de
dmesg | tailjuste après avoir essayé de monter le GPS
J'obtiens
[ 2508.738503] scsi host4: usb-storage 3-1:1.0
[ 2508.738905] usbcore: registered new interface driver usb-storage
[ 2508.909805] usbcore: registered new interface driver uas
[ 2509.742298] scsi 4:0:0:0: Direct-Access Garmin ForeTrex 301 Dri 1.00 PQ: 0 ANSI: 5
[ 2509.749723] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 2509.759557] sd 4:0:0:0: [sdb] 8704 512-byte logical blocks: (4.46 MB/4.25 MiB)
[ 2509.762258] sd 4:0:0:0: [sdb] Write Protect is off
[ 2509.762275] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 2509.765253] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2509.859278] sd 4:0:0:0: [sdb] Attached SCSI removable diskHors ligne
#14 Le 17/07/2016, à 20:54
- lann
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
Bon apparemment, ça ne devrait pas fonctionner comme ça.
Il faut passer par un logiciel qui s'appelle garmin-forerunner-tools
Donc l'installer
sudo apt-get install garmin-forerunner-toolsPour décharger les traces, aller dans le dossier GPS que tu viens de créer
cd GPSEt décharger les traces :
garmin_save_runsHors ligne
#15 Le 17/07/2016, à 21:24
- debutant04
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
lann a écrit :
Bon apparemment, ça ne devrait pas fonctionner comme ça.
Il faut passer par un logiciel qui s'appelle garmin-forerunner-toolsDonc l'installer
sudo apt-get install garmin-forerunner-toolsPour décharger les traces, aller dans le dossier GPS que tu viens de créer
cd GPSEt décharger les traces :
garmin_save_runs
J'obtiens
$ sudo apt-get install garmin-forerunner-tools
[sudo] Mot de passe de ********** :
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
linux-headers-4.4.0-28 linux-headers-4.4.0-28-generic
linux-image-4.4.0-28-generic linux-image-extra-4.4.0-28-generic
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
The following additional packages will be installed:
libusb-1.0-0-dev libusb-1.0-doc
Les NOUVEAUX paquets suivants seront installés :
garmin-forerunner-tools libusb-1.0-0-dev libusb-1.0-doc
0 mis à jour, 3 nouvellement installés, 0 à enlever et 111 non mis à jour.
Il est nécessaire de prendre 337 ko dans les archives.
Après cette opération, 2 201 ko d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] o
Réception de:1 http://fr.archive.ubuntu.com/ubuntu xenial/main i386 libusb-1.0-0-dev i386 2:1.0.20-1 [60,1 kB]
Réception de:2 http://fr.archive.ubuntu.com/ubuntu xenial/main i386 libusb-1.0-doc all 2:1.0.20-1 [160 kB]
Réception de:3 http://fr.archive.ubuntu.com/ubuntu xenial/universe i386 garmin-forerunner-tools i386 0.10repacked-8 [117 kB]
337 ko réceptionnés en 0s (462 ko/s)
Sélection du paquet libusb-1.0-0-dev:i386 précédemment désélectionné.
(Lecture de la base de données... 244405 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../libusb-1.0-0-dev_2%3a1.0.20-1_i386.deb ...
Dépaquetage de libusb-1.0-0-dev:i386 (2:1.0.20-1) ...
Sélection du paquet libusb-1.0-doc précédemment désélectionné.
Préparation du dépaquetage de .../libusb-1.0-doc_2%3a1.0.20-1_all.deb ...
Dépaquetage de libusb-1.0-doc (2:1.0.20-1) ...
Sélection du paquet garmin-forerunner-tools précédemment désélectionné.
Préparation du dépaquetage de .../garmin-forerunner-tools_0.10repacked-8_i386.deb ...
Dépaquetage de garmin-forerunner-tools (0.10repacked-8) ...
Traitement des actions différées (« triggers ») pour doc-base (0.10.7) ...
Traitement de 1 fichier de documentation ajouté…
Enregistrement des documents avec scrollkeeper…
Traitement des actions différées (« triggers ») pour libc-bin (2.23-0ubuntu3) ...
Traitement des actions différées (« triggers ») pour man-db (2.7.5-1) ...
Paramétrage de libusb-1.0-0-dev:i386 (2:1.0.20-1) ...
Paramétrage de libusb-1.0-doc (2:1.0.20-1) ...
Paramétrage de garmin-forerunner-tools (0.10repacked-8) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.23-0ubuntu3) ...$ garmin_save_runs
garmin unit could not be opened!Hors ligne
#16 Le 17/07/2016, à 22:10
- lann
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
Tu peux donner le retour de
garmin_get_infoHors ligne
#17 Le 17/07/2016, à 23:06
- debutant04
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
lann a écrit :
Tu peux donner le retour de
garmin_get_info
J'obtiens
$ garmin_get_info
garmin unit could not be opened!Hors ligne
#18 Le 18/07/2016, à 08:56
- lann
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
Il manque peut être le fichier des règles pour ton GPS
sudo gedit /etc/udev/rules.d/51-garmin.rulesTon fichier devrait être vide
Tu ajoutes cette ligne au fichier :
SUBSYSTEM=="usb", SYSFS{idVendor}=="091e", SYSFS{idProduct}=="23fc", MODE="666", GROUP="plugdev"Tu enregistres le fichier
Tu redémarres
Tu branches et allumes ton GPS
Tu réessayes la commande :
garmin_save_runsDernière modification par lann (Le 18/07/2016, à 09:02)
Hors ligne
#19 Le 18/07/2016, à 08:58
- lann
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
En passant, tu as 111 mises à jour à faire :
sudo apt-get update
sudo apt-get upgradeHors ligne
#20 Le 18/07/2016, à 10:25
- debutant04
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
lann a écrit :
Il manque peut être le fichier des règles pour ton GPS
sudo gedit /etc/udev/rules.d/51-garmin.rulesTon fichier devrait être vide
Tu ajoutes cette ligne au fichier :
SUBSYSTEM=="usb", SYSFS{idVendor}=="091e", SYSFS{idProduct}=="23fc", MODE="666", GROUP="plugdev"Tu enregistres le fichier
Tu redémarres
Tu branches et allumes ton GPS
Tu réessayes la commande :garmin_save_runs
J'obtiens
$ cat /etc/udev/rules.d/51-garmin.rules
SUBSYSTEM=="usb", SYSFS{idVendor}=="091e", SYSFS{idProduct}=="23fc", MODE="666", GROUP="plugdev"
$ garmin_save_runs
garmin unit could not be opened!Hors ligne
#21 Le 18/07/2016, à 13:00
- lann
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
Je viens d'avoir un souci avec mon GPS Garmin etrex : je n'arrivais plus à voir mon périphérique dans /dev (ttyUSB0)
Donc j'ai supprimé le paquet garmin-forerunner-tools et ça a refonctionné.
Supprimes le paquet garmin-forerunner-tools
sudo apt-get remove garmin-forerunner-toolset ce qui ne te sert à rien
sudo apt-get autoremove --purgepuis donne la sortie de
ls /dev/quand ton gps forerunner est branché
Hors ligne
#22 Le 18/07/2016, à 13:26
- Compte supprimé
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
Bonjour,
Je recolle au peloton !
Effectivement, le contexte de mon post N°4 est bien sans "paquet complémentaire" et donc sans garmin-forerunner-tools dont j'ignorais l'existence.
J'ai branché et la mémoire de la montre est montée, sans même une règle udev. J'ai pu copier les fichiers contenus.
Par contre j'ai dû utiliser un site internet pour convertir le fichier .FIT en .gpx, ce qui fait perdre l'enregistrement du rythme cardiaque.
Il semble que le plugin garmin pour firefox n'est plus maintenu.
Dernière modification par Compte supprimé (Le 18/07/2016, à 13:28)
#23 Le 18/07/2016, à 13:39
- debutant04
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
lann a écrit :
Je viens d'avoir un souci avec mon GPS Garmin etrex : je n'arrivais plus à voir mon périphérique dans /dev (ttyUSB0)
Donc j'ai supprimé le paquet garmin-forerunner-tools et ça a refonctionné.Supprimes le paquet garmin-forerunner-tools
sudo apt-get remove garmin-forerunner-toolset ce qui ne te sert à rien
sudo apt-get autoremove --purgepuis donne la sortie de
ls /dev/quand ton gps forerunner est branché
J'utilise un Foretrex 301, pas un Forerunner.
$ ls /dev/
agpgart loop3 ram9 tty24 tty57 ttyS30
autofs loop4 random tty25 tty58 ttyS31
block loop5 rfkill tty26 tty59 ttyS4
bsg loop6 rtc tty27 tty6 ttyS5
btrfs-control loop7 rtc0 tty28 tty60 ttyS6
bus loop-control sda tty29 tty61 ttyS7
char mapper sda1 tty3 tty62 ttyS8
console mcelog sda2 tty30 tty63 ttyS9
core media0 sda5 tty31 tty7 uhid
cpu mem sdb tty32 tty8 uinput
cpu_dma_latency memory_bandwidth sg0 tty33 tty9 urandom
cuse mqueue sg1 tty34 ttyprintk userio
disk net shm tty35 ttyS0 v4l
dri network_latency snapshot tty36 ttyS1 vcs
ecryptfs network_throughput snd tty37 ttyS10 vcs1
fb0 null stderr tty38 ttyS11 vcs2
fd port stdin tty39 ttyS12 vcs3
full ppp stdout tty4 ttyS13 vcs4
fuse psaux tty tty40 ttyS14 vcs5
hpet ptmx tty0 tty41 ttyS15 vcs6
hugepages pts tty1 tty42 ttyS16 vcsa
hwrng ram0 tty10 tty43 ttyS17 vcsa1
i2c-0 ram1 tty11 tty44 ttyS18 vcsa2
i2c-1 ram10 tty12 tty45 ttyS19 vcsa3
i2c-2 ram11 tty13 tty46 ttyS2 vcsa4
i2c-3 ram12 tty14 tty47 ttyS20 vcsa5
i2c-4 ram13 tty15 tty48 ttyS21 vcsa6
i2c-5 ram14 tty16 tty49 ttyS22 vfio
initctl ram15 tty17 tty5 ttyS23 vga_arbiter
input ram2 tty18 tty50 ttyS24 vhci
kmsg ram3 tty19 tty51 ttyS25 vhost-net
lightnvm ram4 tty2 tty52 ttyS26 video0
log ram5 tty20 tty53 ttyS27 zero
loop0 ram6 tty21 tty54 ttyS28
loop1 ram7 tty22 tty55 ttyS29
loop2 ram8 tty23 tty56 ttyS3
$Dernière modification par debutant04 (Le 18/07/2016, à 13:46)
Hors ligne
#24 Le 18/07/2016, à 13:49
- debutant04
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
Tamarou a écrit :
Bonjour,
Je recolle au peloton !
Effectivement, le contexte de mon post N°4 est bien sans "paquet complémentaire" et donc sans garmin-forerunner-tools dont j'ignorais l'existence.
J'ai branché et la mémoire de la montre est montée, sans même une règle udev. J'ai pu copier les fichiers contenus.
Je n'ai pas compris.
Tamarou a écrit :
Par contre j'ai dû utiliser un site internet pour convertir le fichier .FIT en .gpx, ce qui fait perdre l'enregistrement du rythme cardiaque.
J'utilise un Foretrex 301, qui ne dispose pas de cette fonction.
Tamarou a écrit :
Il semble que le plugin garmin pour firefox n'est plus maintenu.
Hors ligne
#25 Le 18/07/2016, à 20:49
- lann
Re : Lecture données GPS de Garmin Foretrex 301 / Ubuntu 16.04
debutant04 a écrit :
J'utilise un Foretrex 301, pas un Forerunner.
Ah oui, excuse moi
Bon pas de périphérique ttyUSB0. Je sèche
Il faudrait demander à Tamarou, ce qu'il a fait pour que ça fonctionne.
Quel est le type de la partition (VFAT ?)
Voir les droits. Apparemment ça se monte directement
Dernière modification par lann (Le 18/07/2016, à 20:52)
Hors ligne