#1 Le 21/06/2016, à 20:10
- Tripayou
Ubuntu 16.04 problème de résolution
Bonjour,
Je viens d'installer la dernière version d'ubuntu suite à l'achat dun SSD. L'installation s'est bien passée mais j'ai un problème de résolution sur mon écran principal de 22" : il m'est impossible de le mettre en résolution native (1680x1050). J'ai tenté la procédure avec xrandr sans succès.
La comande dmesg me donne des erreurs au niveau de l'écran, voici le retour de la commande :
sylvain@ubuntu1604:~$ dmesg
[ 0.000000] microcode: CPU0 microcode updated early to revision 0x7, date = 2013-08-20
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-24-generic (buildd@lgw01-12) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2.1) ) #43-Ubuntu SMP Wed Jun 8 19:27:37 UTC 2016 (Ubuntu 4.4.0-24.43-generic 4.4.10)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-24-generic root=UUID=2fd5744d-a1a4-4516-8ced-7394bfe04d39 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfd6ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dfd70000-0x00000000dfd87fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dfd88000-0x00000000dfddbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dfddc000-0x00000000dfdfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dff00000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/P7P55D DELUXE, BIOS 2101 09/28/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0DFF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB
[ 0.000000] reg 1, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 3, base: 3583MB, range: 1MB, type UC
[ 0.000000] total RAM covered: 8191M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 6 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 512MB, type WB
[ 0.000000] reg 3, base: 3583MB, range: 1MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 5, base: 8GB, range: 512MB, type WB
[ 0.000000] e820: update [mem 0xdff00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdfd70 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] BRK [0x021ff000, 0x021fffff] PGTABLE
[ 0.000000] BRK [0x02200000, 0x02200fff] PGTABLE
[ 0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33c84000-0x35e39fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FB470 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x00000000DFD70000 000044 (v01 092812 RSDT1328 20120928 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000DFD70200 000084 (v01 092812 FACP1328 20120928 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x00000000DFD704A0 00F297 (v01 A1297 A1297001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 0x00000000DFD88000 000040
[ 0.000000] ACPI: APIC 0x00000000DFD70390 0000CC (v01 092812 APIC1328 20120928 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000DFD70460 00003C (v01 092812 OEMMCFG 20120928 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000DFD88040 000072 (v01 092812 OEMB1328 20120928 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DFD7F740 000038 (v01 092812 OEMHPET 20120928 MSFT 00000097)
[ 0.000000] ACPI: ASPT 0x00000000DFD7F9E0 000034 (v06 092812 PerfTune 20120928 MSFT 00000097)
[ 0.000000] ACPI: OSFR 0x00000000DFD7FA20 0000B0 (v01 092812 OEMOSFR 20120928 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000DFD8AB70 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21fff5000-0x21fff9fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dfd6ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff]
[ 0.000000] On node 0 totalpages: 2096397
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14262 pages used for memmap
[ 0.000000] DMA32 zone: 912752 pages, LIFO batch:31
[ 0.000000] Normal zone: 18432 pages used for memmap
[ 0.000000] Normal zone: 1179648 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfd70000-0xdfd87fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfd88000-0xdfddbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfddc000-0xdfdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfe00000-0xdfefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdff00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff880217200000 s98008 r8192 d28968 u262144
[ 0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2063618
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-24-generic root=UUID=2fd5744d-a1a4-4516-8ced-7394bfe04d39 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8133004K/8385588K available (8361K kernel code, 1278K rwdata, 3920K rodata, 1480K init, 1292K bss, 252584K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=16
[ 0.000000] NR_IRQS:16640 nr_irqs:552 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2808.553 MHz processor
[ 0.000030] Calibrating delay loop (skipped), value calculated using timer frequency.. 5617.10 BogoMIPS (lpj=11234212)
[ 0.000032] pid_max: default: 32768 minimum: 301
[ 0.000038] ACPI: Core revision 20150930
[ 0.009307] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.009330] Security Framework initialized
[ 0.009332] Yama: becoming mindful.
[ 0.009350] AppArmor: AppArmor initialized
[ 0.009852] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011455] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012082] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012091] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012299] Initializing cgroup subsys io
[ 0.012302] Initializing cgroup subsys memory
[ 0.012308] Initializing cgroup subsys devices
[ 0.012310] Initializing cgroup subsys freezer
[ 0.012312] Initializing cgroup subsys net_cls
[ 0.012314] Initializing cgroup subsys perf_event
[ 0.012316] Initializing cgroup subsys net_prio
[ 0.012318] Initializing cgroup subsys hugetlb
[ 0.012321] Initializing cgroup subsys pids
[ 0.012337] CPU: Physical Processor ID: 0
[ 0.012338] CPU: Processor Core ID: 0
[ 0.012342] mce: CPU supports 9 MCE banks
[ 0.012351] CPU0: Thermal monitoring enabled (TM1)
[ 0.012356] process: using mwait in idle threads
[ 0.012359] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.012360] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.012624] Freeing SMP alternatives memory: 28K (ffffffff820b3000 - ffffffff820ba000)
[ 0.117162] ftrace: allocating 31907 entries in 125 pages
[ 0.129972] smpboot: Max logical packages: 4
[ 0.129975] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.129980] Switched APIC routing to physical flat.
[ 0.130361] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.277458] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz (family: 0x6, model: 0x1e, stepping: 0x5)
[ 0.277471] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.277485] core: CPU erratum AAJ80 worked around
[ 0.277486] core: CPUID marked event: 'bus cycles' unavailable
[ 0.277488] ... version: 3
[ 0.277489] ... bit width: 48
[ 0.277489] ... generic registers: 4
[ 0.277490] ... value mask: 0000ffffffffffff
[ 0.277491] ... max period: 000000007fffffff
[ 0.277492] ... fixed-purpose events: 3
[ 0.277493] ... event mask: 000000070000000f
[ 0.278211] x86: Booting SMP configuration:
[ 0.278213] .... node #0, CPUs: #1
[ 0.278855] microcode: CPU1 microcode updated early to revision 0x7, date = 2013-08-20
[ 0.281149] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.281227] #2
[ 0.281785] microcode: CPU2 microcode updated early to revision 0x7, date = 2013-08-20
[ 0.283926] #3
[ 0.284495] microcode: CPU3 microcode updated early to revision 0x7, date = 2013-08-20
[ 0.286634] #4 #5 #6 #7
[ 0.296177] x86: Booted up 1 node, 8 CPUs
[ 0.296180] smpboot: Total of 8 processors activated (44936.84 BogoMIPS)
[ 0.301699] devtmpfs: initialized
[ 0.304037] evm: security.selinux
[ 0.304038] evm: security.SMACK64
[ 0.304039] evm: security.SMACK64EXEC
[ 0.304040] evm: security.SMACK64TRANSMUTE
[ 0.304041] evm: security.SMACK64MMAP
[ 0.304041] evm: security.ima
[ 0.304042] evm: security.capability
[ 0.304103] PM: Registering ACPI NVS region [mem 0xdfd88000-0xdfddbfff] (344064 bytes)
[ 0.304185] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.304264] pinctrl core: initialized pinctrl subsystem
[ 0.304361] RTC time: 17:10:20, date: 06/21/16
[ 0.304462] NET: Registered protocol family 16
[ 0.313469] cpuidle: using governor ladder
[ 0.324924] cpuidle: using governor menu
[ 0.324938] PCCT header not found.
[ 0.325039] ACPI: bus type PCI registered
[ 0.325040] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.325109] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.325111] PCI: not using MMCONFIG
[ 0.325112] PCI: Using configuration type 1 for base access
[ 0.336246] ACPI: Added _OSI(Module Device)
[ 0.336248] ACPI: Added _OSI(Processor Device)
[ 0.336249] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.336250] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.338189] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.344816] ACPI: Dynamic OEM Table Load:
[ 0.344827] ACPI: SSDT 0xFFFF8802154D0000 00244C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.345360] ACPI: Dynamic OEM Table Load:
[ 0.345365] ACPI: SSDT 0xFFFF88021599A800 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.345908] ACPI : EC: EC started
[ 0.345985] ACPI: Interpreter enabled
[ 0.345994] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.346005] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.346007] ACPI: Using IOAPIC for interrupt routing
[ 0.346030] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.346974] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.346982] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.352615] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.352620] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.352764] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.352833] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.352836] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.352837] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.352839] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.352846] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.353052] PCI host bridge to bus 0000:00
[ 0.353055] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.353056] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.353058] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.353059] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.353061] pci_bus 0000:00: root bus resource [mem 0xdff00000-0xf7ffffff window]
[ 0.353062] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed8ffff window]
[ 0.353064] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.353072] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
[ 0.353171] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
[ 0.353217] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.353259] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.353294] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[ 0.353386] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[ 0.353476] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[ 0.353565] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[ 0.353649] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[ 0.353727] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[ 0.353822] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.353848] pci 0000:00:1a.0: reg 0x10: [mem 0xf3ffe000-0xf3ffe3ff]
[ 0.353915] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.353953] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.353989] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.354013] pci 0000:00:1b.0: reg 0x10: [mem 0xf3ff8000-0xf3ffbfff 64bit]
[ 0.354069] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.354138] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.354193] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.354232] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.354269] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.354325] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.354364] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.354398] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[ 0.354453] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.354492] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.354525] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
[ 0.354588] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.354628] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.354662] pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400
[ 0.354722] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.354762] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 0.354797] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.354823] pci 0000:00:1d.0: reg 0x10: [mem 0xf3ffd000-0xf3ffd3ff]
[ 0.354890] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.354928] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.354960] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.355034] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.355069] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
[ 0.355226] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
[ 0.355248] pci 0000:00:1f.2: reg 0x10: [io 0xa880-0xa887]
[ 0.355254] pci 0000:00:1f.2: reg 0x14: [io 0xa800-0xa803]
[ 0.355261] pci 0000:00:1f.2: reg 0x18: [io 0xa480-0xa487]
[ 0.355268] pci 0000:00:1f.2: reg 0x1c: [io 0xa400-0xa403]
[ 0.355275] pci 0000:00:1f.2: reg 0x20: [io 0xa080-0xa09f]
[ 0.355282] pci 0000:00:1f.2: reg 0x24: [mem 0xf3ff7000-0xf3ff77ff]
[ 0.355310] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.355376] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.355391] pci 0000:00:1f.3: reg 0x10: [mem 0xf3ffc000-0xf3ffc0ff 64bit]
[ 0.355410] pci 0000:00:1f.3: reg 0x20: [io 0xffe0-0xffff]
[ 0.355516] pci 0000:01:00.0: [10de:1200] type 00 class 0x030000
[ 0.355535] pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf5ffffff]
[ 0.355544] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.355553] pci 0000:01:00.0: reg 0x1c: [mem 0xe4000000-0xe7ffffff 64bit pref]
[ 0.355560] pci 0000:01:00.0: reg 0x24: [io 0xbc00-0xbc7f]
[ 0.355566] pci 0000:01:00.0: reg 0x30: [mem 0xf7c00000-0xf7c7ffff pref]
[ 0.355638] pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300
[ 0.355655] pci 0000:01:00.1: reg 0x10: [mem 0xf7cfc000-0xf7cfffff]
[ 0.362589] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.362595] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
[ 0.362600] pci 0000:00:03.0: bridge window [mem 0xf4000000-0xf7cfffff]
[ 0.362608] pci 0000:00:03.0: bridge window [mem 0xe4000000-0xefffffff 64bit pref]
[ 0.362669] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.362712] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.362753] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.362824] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[ 0.362923] pci 0000:03:00.0: reg 0x24: [mem 0xf7efe000-0xf7efffff]
[ 0.362975] pci 0000:03:00.0: PME# supported from D3hot
[ 0.363036] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[ 0.363063] pci 0000:03:00.1: reg 0x10: [io 0xdc00-0xdc07]
[ 0.363073] pci 0000:03:00.1: reg 0x14: [io 0xd880-0xd883]
[ 0.363082] pci 0000:03:00.1: reg 0x18: [io 0xd800-0xd807]
[ 0.363092] pci 0000:03:00.1: reg 0x1c: [io 0xd480-0xd483]
[ 0.363101] pci 0000:03:00.1: reg 0x20: [io 0xd400-0xd40f]
[ 0.363192] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.363200] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.363204] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.363207] pci 0000:00:1c.6: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.363261] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.363298] pci 0000:02:00.0: reg 0x10: [io 0xc800-0xc8ff]
[ 0.363325] pci 0000:02:00.0: reg 0x18: [mem 0xf2fff000-0xf2ffffff 64bit pref]
[ 0.363341] pci 0000:02:00.0: reg 0x20: [mem 0xf2ff8000-0xf2ffbfff 64bit pref]
[ 0.363352] pci 0000:02:00.0: reg 0x30: [mem 0xf7df0000-0xf7dfffff pref]
[ 0.363409] pci 0000:02:00.0: supports D1 D2
[ 0.363410] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.370592] pci 0000:00:1c.7: PCI bridge to [bus 02]
[ 0.370599] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.370604] pci 0000:00:1c.7: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.370612] pci 0000:00:1c.7: bridge window [mem 0xf2f00000-0xf2ffffff 64bit pref]
[ 0.370679] pci 0000:07:02.0: [1412:1712] type 00 class 0x040100
[ 0.370700] pci 0000:07:02.0: reg 0x10: [io 0xec00-0xec1f]
[ 0.370709] pci 0000:07:02.0: reg 0x14: [io 0xe880-0xe88f]
[ 0.370718] pci 0000:07:02.0: reg 0x18: [io 0xe800-0xe80f]
[ 0.370726] pci 0000:07:02.0: reg 0x1c: [io 0xe480-0xe4bf]
[ 0.370769] pci 0000:07:02.0: supports D2
[ 0.370804] pci 0000:07:03.0: [1106:3044] type 00 class 0x0c0010
[ 0.370825] pci 0000:07:03.0: reg 0x10: [mem 0xf7fff800-0xf7ffffff]
[ 0.370834] pci 0000:07:03.0: reg 0x14: [io 0xe400-0xe47f]
[ 0.370892] pci 0000:07:03.0: supports D2
[ 0.370894] pci 0000:07:03.0: PME# supported from D2 D3hot D3cold
[ 0.370936] pci 0000:07:04.0: [10ec:8167] type 00 class 0x020000
[ 0.370960] pci 0000:07:04.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.370969] pci 0000:07:04.0: reg 0x14: [mem 0xf7fff400-0xf7fff4ff]
[ 0.371005] pci 0000:07:04.0: reg 0x30: [mem 0xf7fc0000-0xf7fdffff pref]
[ 0.371029] pci 0000:07:04.0: supports D1 D2
[ 0.371030] pci 0000:07:04.0: PME# supported from D1 D2 D3hot D3cold
[ 0.371093] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.371097] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.371100] pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.371105] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.371106] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.371108] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.371110] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.371111] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xf7ffffff window] (subtractive decode)
[ 0.371113] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfed8ffff window] (subtractive decode)
[ 0.371725] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.371770] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.371812] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.371856] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.371900] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.371944] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.371988] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.372032] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.372074] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.372103] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.372189] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.372191] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.372192] vgaarb: loaded
[ 0.372193] vgaarb: bridge control possible 0000:01:00.0
[ 0.372395] SCSI subsystem initialized
[ 0.372432] libata version 3.00 loaded.
[ 0.372453] ACPI: bus type USB registered
[ 0.372468] usbcore: registered new interface driver usbfs
[ 0.372476] usbcore: registered new interface driver hub
[ 0.372495] usbcore: registered new device driver usb
[ 0.372613] PCI: Using ACPI for IRQ routing
[ 0.373853] PCI: Discovered peer bus 3f
[ 0.373854] PCI: root bus 3f: using default resources
[ 0.373855] PCI: Probing PCI hardware (bus 3f)
[ 0.373878] ACPI: \: failed to evaluate _DSM (0x1001)
[ 0.373879] PCI host bridge to bus 0000:3f
[ 0.373881] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
[ 0.373883] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.373885] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[ 0.373887] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.373892] pci 0000:3f:00.0: [8086:2c51] type 00 class 0x060000
[ 0.373931] pci 0000:3f:00.1: [8086:2c81] type 00 class 0x060000
[ 0.373969] pci 0000:3f:02.0: [8086:2c90] type 00 class 0x060000
[ 0.374005] pci 0000:3f:02.1: [8086:2c91] type 00 class 0x060000
[ 0.374043] pci 0000:3f:03.0: [8086:2c98] type 00 class 0x060000
[ 0.374080] pci 0000:3f:03.1: [8086:2c99] type 00 class 0x060000
[ 0.374117] pci 0000:3f:03.4: [8086:2c9c] type 00 class 0x060000
[ 0.374154] pci 0000:3f:04.0: [8086:2ca0] type 00 class 0x060000
[ 0.374190] pci 0000:3f:04.1: [8086:2ca1] type 00 class 0x060000
[ 0.374226] pci 0000:3f:04.2: [8086:2ca2] type 00 class 0x060000
[ 0.374262] pci 0000:3f:04.3: [8086:2ca3] type 00 class 0x060000
[ 0.374300] pci 0000:3f:05.0: [8086:2ca8] type 00 class 0x060000
[ 0.374336] pci 0000:3f:05.1: [8086:2ca9] type 00 class 0x060000
[ 0.374373] pci 0000:3f:05.2: [8086:2caa] type 00 class 0x060000
[ 0.374409] pci 0000:3f:05.3: [8086:2cab] type 00 class 0x060000
[ 0.374455] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[ 0.374458] pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.374462] PCI: pci_cache_line_size set to 64 bytes
[ 0.374528] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.374529] e820: reserve RAM buffer [mem 0xdfd70000-0xdfffffff]
[ 0.374632] NetLabel: Initializing
[ 0.374634] NetLabel: domain hash size = 128
[ 0.374634] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.374646] NetLabel: unlabeled traffic allowed by default
[ 0.374722] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.374728] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
[ 0.374732] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.376763] hpet: hpet2 irq 24 for MSI
[ 0.376795] hpet: hpet3 irq 25 for MSI
[ 0.376831] hpet: hpet4 irq 26 for MSI
[ 0.376866] hpet: hpet5 irq 27 for MSI
[ 0.376901] hpet: hpet6 irq 28 for MSI
[ 0.376985] clocksource: Switched to clocksource hpet
[ 0.382406] AppArmor: AppArmor Filesystem Enabled
[ 0.382464] pnp: PnP ACPI init
[ 0.382535] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.382539] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.382595] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.382756] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.382759] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.382930] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.382932] system 00:03: [io 0x0800-0x087f] could not be reserved
[ 0.382934] system 00:03: [io 0x0500-0x057f] has been reserved
[ 0.382936] system 00:03: [io 0x0600-0x0607] has been reserved
[ 0.382938] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.382939] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.382941] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.382944] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.383035] system 00:04: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.383038] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.383193] pnp 00:05: [dma 0 disabled]
[ 0.383247] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.383337] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.383340] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.383342] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.383424] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.383427] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.383572] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.383574] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.383576] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.383578] system 00:08: [mem 0x00100000-0xdfefffff] could not be reserved
[ 0.383580] system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.383583] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.383682] pnp: PnP ACPI: found 9 devices
[ 0.389874] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.389893] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[ 0.389896] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
[ 0.389898] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000 add_align 100000
[ 0.389905] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
[ 0.389907] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[ 0.389909] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000
[ 0.389915] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.389917] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 0.389919] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[ 0.389927] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.389944] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.389946] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.389948] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.389950] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.389952] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.389953] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.389955] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.389957] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.389959] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.389961] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.389963] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.389964] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.389966] pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.389968] pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.389970] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.389972] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.389974] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.389975] pci 0000:00:1c.4: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.389977] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.389979] pci 0000:00:1c.5: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.389983] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe0000000-0xe01fffff]
[ 0.389987] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe0200000-0xe03fffff 64bit pref]
[ 0.389989] pci 0000:00:1c.4: BAR 14: assigned [mem 0xe0400000-0xe05fffff]
[ 0.389993] pci 0000:00:1c.4: BAR 15: assigned [mem 0xe0600000-0xe07fffff 64bit pref]
[ 0.389995] pci 0000:00:1c.5: BAR 14: assigned [mem 0xe0800000-0xe09fffff]
[ 0.389998] pci 0000:00:1c.5: BAR 15: assigned [mem 0xe0a00000-0xe0bfffff 64bit pref]
[ 0.390001] pci 0000:00:1c.6: BAR 15: assigned [mem 0xe0c00000-0xe0dfffff 64bit pref]
[ 0.390003] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.390005] pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.390007] pci 0000:00:1c.5: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.390011] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.390013] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
[ 0.390017] pci 0000:00:03.0: bridge window [mem 0xf4000000-0xf7cfffff]
[ 0.390019] pci 0000:00:03.0: bridge window [mem 0xe4000000-0xefffffff 64bit pref]
[ 0.390023] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.390026] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.390029] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xe01fffff]
[ 0.390033] pci 0000:00:1c.0: bridge window [mem 0xe0200000-0xe03fffff 64bit pref]
[ 0.390037] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.390039] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.390043] pci 0000:00:1c.4: bridge window [mem 0xe0400000-0xe05fffff]
[ 0.390046] pci 0000:00:1c.4: bridge window [mem 0xe0600000-0xe07fffff 64bit pref]
[ 0.390051] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.390053] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
[ 0.390057] pci 0000:00:1c.5: bridge window [mem 0xe0800000-0xe09fffff]
[ 0.390060] pci 0000:00:1c.5: bridge window [mem 0xe0a00000-0xe0bfffff 64bit pref]
[ 0.390065] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.390067] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.390071] pci 0000:00:1c.6: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.390074] pci 0000:00:1c.6: bridge window [mem 0xe0c00000-0xe0dfffff 64bit pref]
[ 0.390079] pci 0000:00:1c.7: PCI bridge to [bus 02]
[ 0.390081] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.390085] pci 0000:00:1c.7: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.390088] pci 0000:00:1c.7: bridge window [mem 0xf2f00000-0xf2ffffff 64bit pref]
[ 0.390093] pci 0000:00:1e.0: PCI bridge to [bus 07]
[ 0.390095] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.390099] pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.390106] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.390108] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.390109] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.390111] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.390112] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xf7ffffff window]
[ 0.390114] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfed8ffff window]
[ 0.390115] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.390117] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf7cfffff]
[ 0.390118] pci_bus 0000:01: resource 2 [mem 0xe4000000-0xefffffff 64bit pref]
[ 0.390120] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
[ 0.390122] pci_bus 0000:06: resource 1 [mem 0xe0000000-0xe01fffff]
[ 0.390123] pci_bus 0000:06: resource 2 [mem 0xe0200000-0xe03fffff 64bit pref]
[ 0.390125] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.390126] pci_bus 0000:05: resource 1 [mem 0xe0400000-0xe05fffff]
[ 0.390127] pci_bus 0000:05: resource 2 [mem 0xe0600000-0xe07fffff 64bit pref]
[ 0.390129] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.390131] pci_bus 0000:04: resource 1 [mem 0xe0800000-0xe09fffff]
[ 0.390132] pci_bus 0000:04: resource 2 [mem 0xe0a00000-0xe0bfffff 64bit pref]
[ 0.390134] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.390135] pci_bus 0000:03: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.390137] pci_bus 0000:03: resource 2 [mem 0xe0c00000-0xe0dfffff 64bit pref]
[ 0.390138] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.390140] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.390141] pci_bus 0000:02: resource 2 [mem 0xf2f00000-0xf2ffffff 64bit pref]
[ 0.390143] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
[ 0.390144] pci_bus 0000:07: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.390146] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window]
[ 0.390147] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window]
[ 0.390149] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.390150] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.390152] pci_bus 0000:07: resource 8 [mem 0xdff00000-0xf7ffffff window]
[ 0.390153] pci_bus 0000:07: resource 9 [mem 0xfc000000-0xfed8ffff window]
[ 0.390156] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
[ 0.390158] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.390187] NET: Registered protocol family 2
[ 0.390352] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.390538] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.390802] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.390830] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.390884] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.390980] NET: Registered protocol family 1
[ 0.391279] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.391287] pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue
[ 0.391290] pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue
[ 0.391315] PCI: CLS 32 bytes, default 64
[ 0.391355] Trying to unpack rootfs image as initramfs...
[ 0.900581] Freeing initrd memory: 34520K (ffff880033c84000 - ffff880035e3a000)
[ 0.900612] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.900614] software IO TLB [mem 0xdbd70000-0xdfd70000] (64MB) mapped at [ffff8800dbd70000-ffff8800dfd6ffff]
[ 0.900789] Scanning for low memory corruption every 60 seconds
[ 0.901237] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.901299] audit: initializing netlink subsys (disabled)
[ 0.901312] audit: type=2000 audit(1466529020.692:1): initialized
[ 0.901641] Initialise system trusted keyring
[ 0.901750] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.903103] zbud: loaded
[ 0.903280] VFS: Disk quotas dquot_6.6.0
[ 0.903315] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.903739] fuse init (API version 7.23)
[ 0.903858] Key type big_key registered
[ 0.903874] Allocating IMA MOK and blacklist keyrings.
[ 0.904153] Key type asymmetric registered
[ 0.904156] Asymmetric key parser 'x509' registered
[ 0.904189] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.904228] io scheduler noop registered
[ 0.904231] io scheduler deadline registered (default)
[ 0.904260] io scheduler cfq registered
[ 0.904465] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.904553] pcieport 0000:00:1c.4: enabling device (0104 -> 0107)
[ 0.904637] pcieport 0000:00:1c.5: enabling device (0104 -> 0107)
[ 0.904897] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.904903] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.904932] intel_idle: MWAIT substates: 0x1120
[ 0.904942] intel_idle: v0.4.1 model 0x1E
[ 0.904943] intel_idle: lapic_timer_reliable_states 0x2
[ 0.905261] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.905264] ACPI: Power Button [PWRB]
[ 0.905296] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.905298] ACPI: Power Button [PWRF]
[ 0.905528] GHES: HEST is not enabled!
[ 0.905609] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.926013] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.928265] Linux agpgart interface v0.103
[ 0.931834] brd: module loaded
[ 0.933244] loop: module loaded
[ 0.933433] libphy: Fixed MDIO Bus: probed
[ 0.933436] tun: Universal TUN/TAP device driver, 1.6
[ 0.933437] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.933501] PPP generic driver version 2.4.2
[ 0.933588] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.933593] ehci-pci: EHCI PCI platform driver
[ 0.933683] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.933690] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.933700] ehci-pci 0000:00:1a.0: debug port 2
[ 0.937613] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
[ 0.937623] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3ffe000
[ 0.949183] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.949216] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.949218] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.949219] usb usb1: Product: EHCI Host Controller
[ 0.949221] usb usb1: Manufacturer: Linux 4.4.0-24-generic ehci_hcd
[ 0.949222] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.949534] hub 1-0:1.0: USB hub found
[ 0.949548] hub 1-0:1.0: 2 ports detected
[ 0.949725] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.949730] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.949740] ehci-pci 0000:00:1d.0: debug port 2
[ 0.953659] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
[ 0.953668] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3ffd000
[ 0.965166] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.965235] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.965240] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.965243] usb usb2: Product: EHCI Host Controller
[ 0.965247] usb usb2: Manufacturer: Linux 4.4.0-24-generic ehci_hcd
[ 0.965250] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.965571] hub 2-0:1.0: USB hub found
[ 0.965584] hub 2-0:1.0: 2 ports detected
[ 0.965688] ehci-platform: EHCI generic platform driver
[ 0.965697] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.965701] ohci-pci: OHCI PCI platform driver
[ 0.965712] ohci-platform: OHCI generic platform driver
[ 0.965719] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.965768] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.968848] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.968853] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.969323] mousedev: PS/2 mouse device common for all mice
[ 0.970100] rtc_cmos 00:01: RTC can wake from S4
[ 0.970361] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.970395] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.970415] i2c /dev entries driver
[ 0.970492] device-mapper: uevent: version 1.0.3
[ 0.970652] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.970691] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.971421] NET: Registered protocol family 10
[ 0.971806] NET: Registered protocol family 17
[ 0.971824] Key type dns_resolver registered
[ 0.972201] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x7
[ 0.972261] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x7
[ 0.972327] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x7
[ 0.972359] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x7
[ 0.972373] microcode: CPU4 sig=0x106e5, pf=0x2, revision=0x7
[ 0.972400] microcode: CPU5 sig=0x106e5, pf=0x2, revision=0x7
[ 0.972437] microcode: CPU6 sig=0x106e5, pf=0x2, revision=0x7
[ 0.972494] microcode: CPU7 sig=0x106e5, pf=0x2, revision=0x7
[ 0.972609] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.972942] registered taskstats version 1
[ 0.972957] Loading compiled-in X.509 certificates
[ 0.973851] Loaded X.509 cert 'Build time autogenerated kernel key: 73e2b8be326740e2e7feadd5601517c5df343108'
[ 0.973870] zswap: loaded using pool lzo/zbud
[ 0.976521] Key type trusted registered
[ 0.981725] Key type encrypted registered
[ 0.981738] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.981744] ima: No TPM chip found, activating TPM-bypass!
[ 0.981777] evm: HMAC attrs: 0x1
[ 0.982399] Magic number: 4:996:188
[ 0.982449] acpi device:1a: hash matches
[ 0.982656] rtc_cmos 00:01: setting system clock to 2016-06-21 17:10:21 UTC (1466529021)
[ 0.984932] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.984934] EDD information not available.
[ 0.984977] PM: Hibernation image not present or could not be loaded.
[ 0.986235] Freeing unused kernel memory: 1480K (ffffffff81f41000 - ffffffff820b3000)
[ 0.986237] Write protecting the kernel read-only data: 14336k
[ 0.987140] Freeing unused kernel memory: 1868K (ffff88000182d000 - ffff880001a00000)
[ 0.987621] Freeing unused kernel memory: 176K (ffff880001dd4000 - ffff880001e00000)
[ 0.999531] random: systemd-udevd urandom read with 10 bits of entropy available
[ 1.022061] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.029151] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.032157] ahci 0000:00:1f.2: version 3.0
[ 1.032308] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.032932] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.032941] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.033307] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xffffc90000016000, 90:e6:ba:19:39:1c, XID 083000c0 IRQ 30
[ 1.033311] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.033332] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.033397] r8169 0000:07:04.0 (unnamed net_device) (uninitialized): not PCI Express
[ 1.033426] scsi host0: pata_jmicron
[ 1.033542] scsi host1: pata_jmicron
[ 1.033602] ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19
[ 1.033604] ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19
[ 1.033663] r8169 0000:07:04.0 eth1: RTL8169sc/8110sc at 0xffffc90000e7a400, 90:e6:ba:19:36:56, XID 18000000 IRQ 19
[ 1.033666] r8169 0000:07:04.0 eth1: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 1.045093] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.045098] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems sxs apst
[ 1.051361] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 1.069455] r8169 0000:07:04.0 enp7s4: renamed from eth1
[ 1.090201] scsi host2: ahci
[ 1.090633] scsi host3: ahci
[ 1.090953] scsi host4: ahci
[ 1.091149] scsi host5: ahci
[ 1.091333] scsi host6: ahci
[ 1.091451] scsi host7: ahci
[ 1.091496] ata3: SATA max UDMA/133 abar m2048@0xf3ff7000 port 0xf3ff7100 irq 29
[ 1.091498] ata4: SATA max UDMA/133 abar m2048@0xf3ff7000 port 0xf3ff7180 irq 29
[ 1.091500] ata5: SATA max UDMA/133 abar m2048@0xf3ff7000 port 0xf3ff7200 irq 29
[ 1.091502] ata6: SATA max UDMA/133 abar m2048@0xf3ff7000 port 0xf3ff7280 irq 29
[ 1.091504] ata7: SATA max UDMA/133 abar m2048@0xf3ff7000 port 0xf3ff7300 irq 29
[ 1.091505] ata8: SATA max UDMA/133 abar m2048@0xf3ff7000 port 0xf3ff7380 irq 29
[ 1.097210] firewire_ohci 0000:07:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.105194] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.105197] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.105589] scsi host8: ahci
[ 1.106026] scsi host9: ahci
[ 1.106142] ata9: SATA max UDMA/133 abar m8192@0xf7efe000 port 0xf7efe100 irq 18
[ 1.106148] ata10: SATA max UDMA/133 abar m8192@0xf7efe000 port 0xf7efe180 irq 18
[ 1.265132] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.281132] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.397844] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.397850] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.398486] hub 1-1:1.0: USB hub found
[ 1.398646] hub 1-1:1.0: 6 ports detected
[ 1.414097] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.414104] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.414753] hub 2-1:1.0: USB hub found
[ 1.414895] hub 2-1:1.0: 8 ports detected
[ 1.425202] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.425297] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.585160] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.586786] ata3.00: supports DRM functions and may not be fully accessible
[ 1.587150] ata3.00: ATA-9: Samsung SSD 750 EVO 120GB, MAT01B6Q, max UDMA/133
[ 1.587155] ata3.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.587928] ata3.00: supports DRM functions and may not be fully accessible
[ 1.588609] ata3.00: configured for UDMA/133
[ 1.589049] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 750 1B6Q PQ: 0 ANSI: 5
[ 1.589819] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 1.589824] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.590217] sd 2:0:0:0: [sda] Write Protect is off
[ 1.590225] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.590509] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.592080] sda: sda1 sda2
[ 1.593196] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.597483] firewire_core 0000:07:03.0: created device fw0: GUID 001e8c0000a93222, S400
[ 1.685154] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[ 1.778560] usb 2-1.3: New USB device found, idVendor=045e, idProduct=00f5
[ 1.778566] usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.778570] usb 2-1.3: Product: USB camera
[ 1.849324] usb 2-1.6: new low-speed USB device number 4 using ehci-pci
[ 1.897220] tsc: Refined TSC clocksource calibration: 2808.714 MHz
[ 1.897226] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x287c6876210, max_idle_ns: 440795206608 ns
[ 1.947400] usb 2-1.6: New USB device found, idVendor=046d, idProduct=c31d
[ 1.947406] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.947410] usb 2-1.6: Product: USB Keyboard
[ 1.947413] usb 2-1.6: Manufacturer: Logitech
[ 1.955505] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.964231] usbcore: registered new interface driver usbhid
[ 1.964233] usbhid: USB HID core driver
[ 1.965884] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:046D:C31D.0001/input/input5
[ 2.021290] hid-generic 0003:046D:C31D.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.6/input0
[ 2.022914] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:046D:C31D.0002/input/input6
[ 2.025145] usb 2-1.7: new full-speed USB device number 5 using ehci-pci
[ 2.077339] hid-generic 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.6/input1
[ 2.081332] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.087152] ata4.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
[ 2.087158] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.092929] ata4.00: configured for UDMA/133
[ 2.093171] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 0001 PQ: 0 ANSI: 5
[ 2.093373] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.093402] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 2.093544] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.093547] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.093626] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.104060] sdb: sdb1
[ 2.104309] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.125080] usb 2-1.7: New USB device found, idVendor=046d, idProduct=c246
[ 2.125086] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.125090] usb 2-1.7: Product: Gaming Mouse G300
[ 2.125093] usb 2-1.7: Manufacturer: Logitech
[ 2.127075] input: Logitech Gaming Mouse G300 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/0003:046D:C246.0003/input/input7
[ 2.127542] hid-generic 0003:046D:C246.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Gaming Mouse G300] on usb-0000:00:1d.0-1.7/input0
[ 2.131612] input: Logitech Gaming Mouse G300 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/0003:046D:C246.0004/input/input8
[ 2.185696] hid-generic 0003:046D:C246.0004: input,hiddev0,hidraw3: USB HID v1.10 Keyboard [Logitech Gaming Mouse G300] on usb-0000:00:1d.0-1.7/input1
[ 2.261235] usb 2-1.8: new low-speed USB device number 6 using ehci-pci
[ 2.358520] usb 2-1.8: New USB device found, idVendor=06a3, idProduct=80c0
[ 2.358526] usb 2-1.8: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.358530] usb 2-1.8: Product: Saitek Pro Gamer Command Unit
[ 2.362609] input: Saitek Pro Gamer Command Unit as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/0003:06A3:80C0.0005/input/input9
[ 2.362928] hid-generic 0003:06A3:80C0.0005: input,hidraw4: USB HID v1.00 Joystick [Saitek Pro Gamer Command Unit] on usb-0000:00:1d.0-1.8/input0
[ 2.585283] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.598614] ata5.00: ATA-7: Hitachi HDT725040VLA360, V5COA73A, max UDMA/133
[ 2.598620] ata5.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.599893] ata5.00: configured for UDMA/133
[ 2.600458] scsi 4:0:0:0: Direct-Access ATA Hitachi HDT72504 A73A PQ: 0 ANSI: 5
[ 2.600807] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 2.600976] sd 4:0:0:0: [sdc] 781422768 512-byte logical blocks: (400 GB/373 GiB)
[ 2.601454] sd 4:0:0:0: [sdc] Write Protect is off
[ 2.601461] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.601754] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.622680] sdc: sdc1
[ 2.623683] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 2.897630] clocksource: Switched to clocksource tsc
[ 3.089299] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.092383] ata6.00: ATAPI: HL-DT-ST DVDRAM GH40F, MG01, max UDMA/100
[ 3.096212] ata6.00: configured for UDMA/100
[ 3.104490] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH40F MG01 PQ: 0 ANSI: 5
[ 3.125937] sr 5:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.125942] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.126169] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 3.126266] sr 5:0:0:0: Attached scsi generic sg3 type 5
[ 3.445356] ata7: SATA link down (SStatus 0 SControl 300)
[ 3.937381] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.938994] ata8.00: supports DRM functions and may not be fully accessible
[ 3.939474] ata8.00: disabling queued TRIM support
[ 3.939480] ata8.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
[ 3.939484] ata8.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 3.940160] ata8.00: supports DRM functions and may not be fully accessible
[ 3.940524] ata8.00: disabling queued TRIM support
[ 3.940795] ata8.00: configured for UDMA/133
[ 3.941383] scsi 7:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
[ 3.942024] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 3.942037] sd 7:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 3.942095] sd 7:0:0:0: [sdd] Write Protect is off
[ 3.942097] sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 3.942108] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.942447] sdd: sdd1 sdd2
[ 3.942834] sd 7:0:0:0: [sdd] Attached SCSI disk
[ 4.045395] floppy0: no floppy controllers found
[ 4.267743] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.363062] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 4.363214] systemd[1]: Detected architecture x86-64.
[ 4.363363] systemd[1]: Set hostname to <ubuntu1604>.
[ 4.433728] random: nonblocking pool is initialized
[ 4.444565] systemd[1]: Listening on udev Control Socket.
[ 4.444647] systemd[1]: Listening on Journal Audit Socket.
[ 4.444656] systemd[1]: Reached target Encrypted Volumes.
[ 4.444742] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.444753] systemd[1]: Reached target User and Group Name Lookups.
[ 4.444778] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.444803] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.444811] systemd[1]: Reached target Remote File Systems (Pre).
[ 4.444816] systemd[1]: Reached target Remote File Systems.
[ 4.444841] systemd[1]: Listening on Journal Socket.
[ 4.444865] systemd[1]: Listening on udev Kernel Socket.
[ 4.444886] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.444950] systemd[1]: Created slice System Slice.
[ 4.465606] systemd[1]: Starting Uncomplicated firewall...
[ 4.466235] systemd[1]: Starting Load Kernel Modules...
[ 4.468517] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.468874] systemd[1]: Mounting Huge Pages File System...
[ 4.469278] systemd[1]: Mounting Debug File System...
[ 4.469745] systemd[1]: Started Braille Device Support.
[ 4.470385] systemd[1]: Started Read required files in advance.
[ 4.470955] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.471008] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.471122] systemd[1]: Created slice User and Session Slice.
[ 4.471142] systemd[1]: Reached target Slices.
[ 4.471245] systemd[1]: Created slice system-getty.slice.
[ 4.471291] systemd[1]: Listening on Syslog Socket.
[ 4.471778] systemd[1]: Starting Journal Service...
[ 4.473238] systemd[1]: Started Uncomplicated firewall.
[ 4.477120] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 4.480276] systemd[1]: Mounted Debug File System.
[ 4.480325] systemd[1]: Mounted POSIX Message Queue File System.
[ 4.480366] systemd[1]: Mounted Huge Pages File System.
[ 4.481339] lp: driver loaded but no devices found
[ 4.483996] ppdev: user-space parallel port driver
[ 4.489350] systemd[1]: Started Load Kernel Modules.
[ 4.495015] systemd[1]: Starting Apply Kernel Variables...
[ 4.495352] systemd[1]: Mounting FUSE Control File System...
[ 4.495782] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 4.497799] systemd[1]: Mounted FUSE Control File System.
[ 4.505464] systemd[1]: Started Apply Kernel Variables.
[ 4.519232] systemd[1]: Started Create Static Device Nodes in /dev.
[ 4.519643] systemd[1]: Starting udev Kernel Device Manager...
[ 4.520993] systemd[1]: Started Journal Service.
[ 4.545498] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 4.584461] systemd-journald[306]: Received request to flush runtime journal from PID 1
[ 4.632809] wmi: Mapper loaded
[ 4.640651] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20150930/utaddress-254)
[ 4.640657] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.640660] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS1) (20150930/utaddress-254)
[ 4.640663] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20150930/utaddress-254)
[ 4.640666] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.640667] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS1) (20150930/utaddress-254)
[ 4.640669] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20150930/utaddress-254)
[ 4.640672] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.640692] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.646905] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.653299] ATK0110 ATK0110:00: EC enabled
[ 4.668143] EDAC MC: Ver: 3.0.0
[ 4.670724] [drm] Initialized drm 1.1.0 20060810
[ 4.671927] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
[ 4.671972] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[ 4.671978] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 4.674840] media: Linux media interface: v0.10
[ 4.681491] audit: type=1400 audit(1466529025.195:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=570 comm="apparmor_parser"
[ 4.681503] audit: type=1400 audit(1466529025.195:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=570 comm="apparmor_parser"
[ 4.681510] audit: type=1400 audit(1466529025.195:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=570 comm="apparmor_parser"
[ 4.681515] audit: type=1400 audit(1466529025.195:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=570 comm="apparmor_parser"
[ 4.685483] audit: type=1400 audit(1466529025.199:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=576 comm="apparmor_parser"
[ 4.685492] audit: type=1400 audit(1466529025.199:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=576 comm="apparmor_parser"
[ 4.685498] audit: type=1400 audit(1466529025.199:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=576 comm="apparmor_parser"
[ 4.685697] audit: type=1400 audit(1466529025.199:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=592 comm="apparmor_parser"
[ 4.688182] Linux video capture interface: v2.00
[ 4.688620] audit: type=1400 audit(1466529025.199:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=569 comm="apparmor_parser"
[ 4.692009] gspca_main: v2.14.0 registered
[ 4.694859] gspca_main: sonixj-2.14.0 probing 045e:00f5
[ 4.695701] input: sonixj as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/input/input10
[ 4.696001] usbcore: registered new interface driver sonixj
[ 4.723241] usbcore: registered new interface driver snd-usb-audio
[ 4.725313] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 4.725322] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 4.740962] snd_hda_codec_via hdaudioC0D0: autoconfig for VT2020: line_outs=4 (0x24/0x25/0x26/0x27/0x0) type:line
[ 4.740967] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.740969] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
[ 4.740971] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
[ 4.740972] snd_hda_codec_via hdaudioC0D0: dig-out=0x2d/0x2e
[ 4.740973] snd_hda_codec_via hdaudioC0D0: inputs:
[ 4.740975] snd_hda_codec_via hdaudioC0D0: Front Mic=0x29
[ 4.740977] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x2b
[ 4.740979] snd_hda_codec_via hdaudioC0D0: Line=0x2a
[ 4.740980] snd_hda_codec_via hdaudioC0D0: CD=0x2c
[ 4.757759] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 4.758657] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.758749] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.758826] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 4.758901] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 4.758977] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 4.759051] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 4.759128] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 4.759203] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 4.805965] Adding 8001532k swap on /dev/sda2. Priority:-1 extents:1 across:8001532k SSFS
[ 4.809992] gpio_ich: GPIO from 436 to 511 on gpio_ich
[ 4.838793] nvidia: module license 'NVIDIA' taints kernel.
[ 4.838794] Disabling lock debugging due to kernel taint
[ 4.842819] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 4.847929] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 4.848013] nvidia-nvlink: Nvlink Core is being initialized, major device number 245
[ 4.848096] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 4.848106] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 361.42 Tue Mar 22 18:10:58 PDT 2016
[ 5.186408] IPv6: ADDRCONF(NETDEV_UP): enp7s4: link is not ready
[ 5.198042] r8169 0000:07:04.0 enp7s4: link down
[ 5.198057] r8169 0000:07:04.0 enp7s4: link down
[ 5.198100] IPv6: ADDRCONF(NETDEV_UP): enp7s4: link is not ready
[ 5.201352] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 5.258754] r8169 0000:02:00.0 enp2s0: link down
[ 5.258760] r8169 0000:02:00.0 enp2s0: link down
[ 5.258798] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 5.634061] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input19
[ 5.634193] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input20
[ 5.634333] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input21
[ 5.634476] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input22
[ 6.008485] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 361.42 Tue Mar 22 17:29:54 PDT 2016
[ 6.008838] nvidia-modeset: Allocated GPU:0 (GPU-d23e323e-4177-363e-2177-282b016aed52) @ PCI:0000:01:00.0
[ 6.100220] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device DVI-I-0
[ 6.801142] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device DVI-I-0
[ 7.117520] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device DVI-I-0
[ 7.548453] r8169 0000:02:00.0 enp2s0: link up
[ 7.548467] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 7.661477] floppy0: no floppy controllers found
[ 10.620159] retire_capture_urb: 36 callbacks suppressed
[ 18.433999] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device DVI-I-0
[ 18.517943] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device DVI-I-0
[ 21.717597] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device DVI-I-0
[ 31.551076] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device DVI-I-0
[ 121.866590] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device DVI-I-0xrandr me retourne :
sylvain@ubuntu1604:~$ xrandr
Screen 0: minimum 8 x 8, current 2304 x 1024, maximum 16384 x 16384
DVI-I-0 connected primary 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 60.00*+
1360x768 59.96 59.80
1152x864 60.00
800x600 72.19 60.32 56.25
680x384 59.96 59.80
640x480 59.94
512x384 60.00
400x300 72.19
320x240 60.05
DVI-I-1 connected 1280x1024+1024+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.02*+ 75.02
1280x960 60.00
1152x864 75.00 70.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
640x480 75.00 72.81 59.94
DVI-I-2 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-I-3 disconnected (normal left inverted right x axis y axis)Je suis sur une installation toute fraiche avec tous les paquets à jour et le dernier pilote nvidia installé (361.42).
Merci de votre aide.
Hors ligne
#2 Le 21/06/2016, à 20:25
- depann-informatique
Re : Ubuntu 16.04 problème de résolution
As-tu installé les pilotes propriétaires ?
Sinon il faut mettre en route "Pilotes supplémentaires" puis attendre jusqu'à ce que le programme te propose les différents pilotes, il vaut mieux prendre le pilote recommandé, c'est plus que conseillé !
Salut a+
Kalachakra : Un Mandala pour la Paix.
Ainsi qu'une mère au péril de sa vie surveille et protège son unique enfant, Ainsi avec un esprit sans limite doit-on chérir toute chose vivante. (Bouddha)
Hors ligne
#3 Le 21/06/2016, à 20:33
- Tripayou
Re : Ubuntu 16.04 problème de résolution
Oui j'utilise le pilote propriétaire recommandé : NVIDIA binary driver - version 361.42 depuis nvidia-361 (propriétaire, testé)
Hors ligne
#4 Le 14/08/2016, à 00:44
- TMA
Re : Ubuntu 16.04 problème de résolution
Bonsoir
J'ai plus ou moins le même problème que "Tripayou"
Ma configuuration :
Systeme : Ubuntu 16.04 LTS
CM : Asrock Z68 Extreme3 gen3
CPU Intel® Xeon(R) CPU E31245
CG : Intel HD : Intel® Sandybridge Server (qui n'a à priori pas de pilote propriétaire)
Pour avoir mon écran en entier je suis obligé de passer en résolution 1680x1050 (16:10) à la place de 1920x1080 (16:9) en attendant de trouver une solution
J'ai un problème en plus avec l'HDMI, quand je sorts de l’écran de veille il me switch ma sortie audio du numérique (S/PDIF) vers l'HDMI / DisplayPort 3 résultat j'ai plus de son (audio coupé sur l'écran)
Si je débranche mon port HDMI et que je force l’écran de veille avec les touches [Windows]+[L] je n'ai plus le problème du son
Si je branche l'HDMI sur un PC portable en 16.04 LTS mais qui lui n'a qu'une sortie audio interne à la place du S/PDIF
J'ai plus de switch de carte son
mais j'ai toujours le problème de la résolution d’écran en sortie HDMI
Je sais pas si les deux problèmes sont liés, mais bon, si quelqu'un a une solution je suis preneur
EDIT :
En parcourant d'autres posts j'ai trouvé un vieux post de 2010 qui pourrait résoudre ton problème car il résout le mien a moitié
voir Écran tronqué sur TV Panasonic [RÉSOLU]
Dans les options de mon écran j'ai HDMI PC et HDMI AV, en sélectionnant HDMI PC mon problème d’affichage est résolu mais toujours pas mon problème de sortie audio
En tout cas, merci a Floriane d'avoir fait remonté l'autre post
Dernière modification par TMA (Le 14/08/2016, à 02:41)
Hors ligne