Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 25/08/2016, à 11:37

tintinux

Extinction de l'écran après login et activité

Bonjour

Sous Ubuntu 14.04 (avec ou sans Mate), je rencontre le nouveau problème suivant :

Je démarre et me connecte normalement, jusqu'à l'affichage de mon bureau.
Dès que je bouge la souris ou tape sur une touche, l'écran s'éteint.
Si je change l'alimentation (batterie <-> secteur), l'écran se réactive au bout d'une vingtaine de secondes, mais ça recommence si je bouge la souris ou tape sur une touche.

Je ne peux donc pas afficher les fichiers /etc/X11/xorg.conf et /var/log/Xorg.0.log sauf si vous m'indiquez une astuce pour y parvenir...

En démarrant en "recovery mode", avec "resume"  (il est dit que "certains pilotes graphiques ne peuvent démarrer ainsi"), je ne rencontre plus de problème, sauf une définition peut-être un peu moins bonne.

Mais dans ce mode, je ne vois pas de fichier xorg.conf

ls -l /etc/X11/xorg.conf 
ls: impossible d'accéder à /etc/X11/xorg.conf: Aucun fichier ou dossier de ce type

Si ça peut être utile, j'ai :

lspci | grep "VGA"
00:02.0 VGA compatible controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display (rev 0e)
cat /var/log/Xorg.0.log 
[    60.913] 
X.Org X Server 1.16.0
Release Date: 2014-07-16
[    60.913] X Protocol Version 11, Revision 0
[    60.913] Build Operating System: Linux 3.2.0-70-generic x86_64 Ubuntu
[    60.913] Current Operating System: Linux goeland 3.16.0-77-generic #99~14.04.1-Ubuntu SMP Tue Jun 28 19:17:10 UTC 2016 x86_64
[    60.913] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-77-generic.efi.signed root=UUID=733a6529-ae6e-4b20-8978-a0d02f18f92f ro recovery nomodeset
[    60.913] Build Date: 12 February 2015  11:11:26PM
[    60.913] xorg-server 2:1.16.0-1ubuntu1.2~trusty2 (For technical support please see http://www.ubuntu.com/support) 
[    60.913] Current version of pixman: 0.30.2
[    60.913] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    60.913] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    60.913] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 25 11:07:03 2016
[    60.969] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    60.969] (==) No Layout section.  Using the first Screen section.
[    60.969] (==) No screen section available. Using defaults.
[    60.969] (**) |-->Screen "Default Screen Section" (0)
[    60.969] (**) |   |-->Monitor "<default monitor>"
[    60.970] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    60.970] (==) Automatically adding devices
[    60.970] (==) Automatically enabling devices
[    60.970] (==) Automatically adding GPU devices
[    60.970] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    60.970] 	Entry deleted from font path.
[    60.970] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    60.970] 	Entry deleted from font path.
[    60.970] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    60.970] 	Entry deleted from font path.
[    60.970] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    60.970] 	Entry deleted from font path.
[    60.970] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    60.970] 	Entry deleted from font path.
[    60.970] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    60.970] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    60.970] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    60.970] (II) Loader magic: 0x7f2d19408c80
[    60.970] (II) Module ABI versions:
[    60.970] 	X.Org ANSI C Emulation: 0.4
[    60.970] 	X.Org Video Driver: 18.0
[    60.970] 	X.Org XInput driver : 21.0
[    60.970] 	X.Org Server Extension : 8.0
[    60.971] (--) PCI:*(0:0:2:0) 8086:0f31:103c:227c rev 14, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x00002050/8
[    60.972] (II) LoadModule: "glx"
[    61.029] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    61.772] (II) Module glx: vendor="X.Org Foundation"
[    61.772] 	compiled for 1.16.0, module version = 1.0.0
[    61.772] 	ABI class: X.Org Server Extension, version 8.0
[    61.772] (==) AIGLX enabled
[    61.772] (==) Matched intel as autoconfigured driver 0
[    61.772] (==) Matched modesetting as autoconfigured driver 1
[    61.772] (==) Matched fbdev as autoconfigured driver 2
[    61.772] (==) Matched vesa as autoconfigured driver 3
[    61.772] (==) Assigned the driver to the xf86ConfigLayout
[    61.772] (II) LoadModule: "intel"
[    61.783] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    61.794] (II) Module intel: vendor="X.Org Foundation"
[    61.794] 	compiled for 1.16.0, module version = 2.99.914
[    61.794] 	Module class: X.Org Video Driver
[    61.794] 	ABI class: X.Org Video Driver, version 18.0
[    61.794] (II) LoadModule: "modesetting"
[    61.794] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    61.794] (II) Module modesetting: vendor="X.Org Foundation"
[    61.794] 	compiled for 1.16.0, module version = 0.9.0
[    61.794] 	Module class: X.Org Video Driver
[    61.794] 	ABI class: X.Org Video Driver, version 18.0
[    61.794] (II) LoadModule: "fbdev"
[    61.795] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    61.795] (II) Module fbdev: vendor="X.Org Foundation"
[    61.795] 	compiled for 1.16.0, module version = 0.4.4
[    61.795] 	Module class: X.Org Video Driver
[    61.795] 	ABI class: X.Org Video Driver, version 18.0
[    61.795] (II) LoadModule: "vesa"
[    61.795] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    61.795] (II) Module vesa: vendor="X.Org Foundation"
[    61.795] 	compiled for 1.16.0, module version = 2.3.3
[    61.795] 	Module class: X.Org Video Driver
[    61.795] 	ABI class: X.Org Video Driver, version 18.0
[    61.795] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    61.796] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    61.796] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    61.796] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    61.796] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    61.796] (II) FBDEV: driver for framebuffer: fbdev
[    61.796] (II) VESA: driver for VESA chipsets: vesa
[    61.796] (++) using VT number 7

[    61.804] (EE) open /dev/dri/card0: No such file or directory
[    61.804] (WW) Falling back to old probe method for modesetting
[    61.804] (EE) open /dev/dri/card0: No such file or directory
[    61.804] (II) Loading sub module "fbdevhw"
[    61.804] (II) LoadModule: "fbdevhw"
[    61.805] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    61.805] (II) Module fbdevhw: vendor="X.Org Foundation"
[    61.805] 	compiled for 1.16.0, module version = 0.0.2
[    61.805] 	ABI class: X.Org Video Driver, version 18.0
[    61.805] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[    61.805] (II) FBDEV(1): using default device
[    61.805] (WW) Falling back to old probe method for vesa
[    61.805] (EE) Screen 0 deleted because of no matching config section.
[    61.805] (II) UnloadModule: "modesetting"
[    61.805] (II) FBDEV(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    61.805] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[    61.805] (==) FBDEV(0): RGB weight 888
[    61.805] (==) FBDEV(0): Default visual is TrueColor
[    61.805] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[    61.805] (II) FBDEV(0): hardware: EFI VGA (video memory: 5632kB)
[    61.805] (II) FBDEV(0): checking modes against framebuffer device...
[    61.805] (II) FBDEV(0): checking modes against monitor...
[    61.805] (--) FBDEV(0): Virtual size is 1600x900 (pitch 1600)
[    61.805] (**) FBDEV(0):  Built-in mode "current": 144.0 MHz, 70.9 kHz, 76.7 Hz
[    61.805] (II) FBDEV(0): Modeline "current"x0.0  144.01  1600 1632 1832 2032  900 904 908 924 -hsync -vsync -csync (70.9 kHz b)
[    61.805] (==) FBDEV(0): DPI set to (96, 96)
[    61.805] (II) Loading sub module "fb"
[    61.805] (II) LoadModule: "fb"
[    61.806] (II) Loading /usr/lib/xorg/modules/libfb.so
[    61.815] (II) Module fb: vendor="X.Org Foundation"
[    61.815] 	compiled for 1.16.0, module version = 1.0.0
[    61.815] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    61.815] (**) FBDEV(0): using shadow framebuffer
[    61.815] (II) Loading sub module "shadow"
[    61.815] (II) LoadModule: "shadow"
[    61.816] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    61.819] (II) Module shadow: vendor="X.Org Foundation"
[    61.819] 	compiled for 1.16.0, module version = 1.1.0
[    61.819] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    61.819] (IIcat /var/log/Xorg.0.log 
[    60.913] 
X.Org X Server 1.16.0
Release Date: 2014-07-16
[    60.913] X Protocol Version 11, Revision 0
[    60.913] Build Operating System: Linux 3.2.0-70-generic x86_64 Ubuntu
[    60.913] Current Operating System: Linux goeland 3.16.0-77-generic #99~14.04.1-Ubuntu SMP Tue Jun 28 19:17:10 UTC 2016 x86_64
[    60.913] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-77-generic.efi.signed root=UUID=733a6529-ae6e-4b20-8978-a0d02f18f92f ro recovery nomodeset
[    60.913] Build Date: 12 February 2015  11:11:26PM
[    60.913] xorg-server 2:1.16.0-1ubuntu1.2~trusty2 (For technical support please see http://www.ubuntu.com/support) 
[    60.913] Current version of pixman: 0.30.2
[    60.913] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    60.913] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    60.913] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 25 11:07:03 2016
[    60.969] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    60.969] (==) No Layout section.  Using the first Screen section.
[    60.969] (==) No screen section available. Using defaults.
[    60.969] (**) |-->Screen "Default Screen Section" (0)
[    60.969] (**) |   |-->Monitor "<default monitor>"
[    60.970] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    60.970] (==) Automatically adding devices
[    60.970] (==) Automatically enabling devices
[    60.970] (==) Automatically adding GPU devices
[    60.970] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    60.970] 	Entry deleted from font path.
[    60.970] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    60.970] 	Entry deleted from font path.
[    60.970] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    60.970] 	Entry deleted from font path.
[    60.970] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    60.970] 	Entry deleted from font path.
[    60.970] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    60.970] 	Entry deleted from font path.
[    60.970] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    60.970] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    60.970] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    60.970] (II) Loader magic: 0x7f2d19408c80
[    60.970] (II) Module ABI versions:
[    60.970] 	X.Org ANSI C Emulation: 0.4
[    60.970] 	X.Org Video Driver: 18.0
[    60.970] 	X.Org XInput driver : 21.0
[    60.970] 	X.Org Server Extension : 8.0
[    60.971] (--) PCI:*(0:0:2:0) 8086:0f31:103c:227c rev 14, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x00002050/8
[    60.972] (II) LoadModule: "glx"
[    61.029] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    61.772] (II) Module glx: vendor="X.Org Foundation"
[    61.772] 	compiled for 1.16.0, module version = 1.0.0
[    61.772] 	ABI class: X.Org Server Extension, version 8.0
[    61.772] (==) AIGLX enabled
[    61.772] (==) Matched intel as autoconfigured driver 0
[    61.772] (==) Matched modesetting as autoconfigured driver 1
[    61.772] (==) Matched fbdev as autoconfigured driver 2
[    61.772] (==) Matched vesa as autoconfigured driver 3
[    61.772] (==) Assigned the driver to the xf86ConfigLayout
[    61.772] (II) LoadModule: "intel"
[    61.783] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    61.794] (II) Module intel: vendor="X.Org Foundation"
[    61.794] 	compiled for 1.16.0, module version = 2.99.914
[    61.794] 	Module class: X.Org Video Driver
[    61.794] 	ABI class: X.Org Video Driver, version 18.0
[    61.794] (II) LoadModule: "modesetting"
[    61.794] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    61.794] (II) Module modesetting: vendor="X.Org Foundation"
[    61.794] 	compiled for 1.16.0, module version = 0.9.0
[    61.794] 	Module class: X.Org Video Driver
[    61.794] 	ABI class: X.Org Video Driver, version 18.0
[    61.794] (II) LoadModule: "fbdev"
[    61.795] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    61.795] (II) Module fbdev: vendor="X.Org Foundation"
[    61.795] 	compiled for 1.16.0, module version = 0.4.4
[    61.795] 	Module class: X.Org Video Driver
[    61.795] 	ABI class: X.Org Video Driver, version 18.0
[    61.795] (II) LoadModule: "vesa"
[    61.795] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    61.795] (II) Module vesa: vendor="X.Org Foundation"
[    61.795] 	compiled for 1.16.0, module version = 2.3.3
[    61.795] 	Module class: X.Org Video Driver
[    61.795] 	ABI class: X.Org Video Driver, version 18.0
[    61.795] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    61.796] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    61.796] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    61.796] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    61.796] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    61.796] (II) FBDEV: driver for framebuffer: fbdev
[    61.796] (II) VESA: driver for VESA chipsets: vesa
[    61.796] (++) using VT number 7

[    61.804] (EE) open /dev/dri/card0: No such file or directory
[    61.804] (WW) Falling back to old probe method for modesetting
[    61.804] (EE) open /dev/dri/card0: No such file or directory
[    61.804] (II) Loading sub module "fbdevhw"
[    61.804] (II) LoadModule: "fbdevhw"
[    61.805] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    61.805] (II) Module fbdevhw: vendor="X.Org Foundation"
[    61.805] 	compiled for 1.16.0, module version = 0.0.2
[    61.805] 	ABI class: X.Org Video Driver, version 18.0
[    61.805] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[    61.805] (II) FBDEV(1): using default device
[    61.805] (WW) Falling back to old probe method for vesa
[    61.805] (EE) Screen 0 deleted because of no matching config section.
[    61.805] (II) UnloadModule: "modesetting"
[    61.805] (II) FBDEV(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    61.805] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[    61.805] (==) FBDEV(0): RGB weight 888
[    61.805] (==) FBDEV(0): Default visual is TrueColor
[    61.805] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[    61.805] (II) FBDEV(0): hardware: EFI VGA (video memory: 5632kB)
[    61.805] (II) FBDEV(0): checking modes against framebuffer device...
[    61.805] (II) FBDEV(0): checking modes against monitor...
[    61.805] (--) FBDEV(0): Virtual size is 1600x900 (pitch 1600)
[    61.805] (**) FBDEV(0):  Built-in mode "current": 144.0 MHz, 70.9 kHz, 76.7 Hz
[    61.805] (II) FBDEV(0): Modeline "current"x0.0  144.01  1600 1632 1832 2032  900 904 908 924 -hsync -vsync -csync (70.9 kHz b)
[    61.805] (==) FBDEV(0): DPI set to (96, 96)
[    61.805] (II) Loading sub module "fb"
[    61.805] (II) LoadModule: "fb"
[    61.806] (II) Loading /usr/lib/xorg/modules/libfb.so
[    61.815] (II) Module fb: vendor="X.Org Foundation"
[    61.815] 	compiled for 1.16.0, module version = 1.0.0
[    61.815] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    61.815] (**) FBDEV(0): using shadow framebuffer
[    61.815] (II) Loading sub module "shadow"
[    61.815] (II) LoadModule: "shadow"
[    61.816] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    61.819] (II) Module shadow: vendor="X.Org Foundation"
[    61.819] 	compiled for 1.16.0, module version = 1.1.0
[    61.819] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    61.819] (II) UnloadModule: "vesa"
[    61.819] (II) Unloading vesa
[    61.820] (==) Depth 24 pixmap format is 32 bpp
[    61.820] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[    61.820] (==) FBDEV(0): Backing store enabled
[    61.820] (==) FBDEV(0): DPMS enabled
[    61.820] (==) RandR enabled
[    61.828] (II) AIGLX: Screen 0 is not DRI2 capable
[    61.828] (EE) AIGLX: reverting to software rendering
[    63.797] (II) AIGLX: Loaded and initialized swrast
[    63.797] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    63.812] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    63.816] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    63.817] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    63.817] (**) Power Button: Applying InputClass "keyboard defaults"
[    63.817] (II) LoadModule: "evdev"
[    63.817] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    63.967] (II) Module evdev: vendor="X.Org Foundation"
[    63.968] 	compiled for 1.16.0, module version = 2.9.0
[    63.968] 	Module class: X.Org XInput Driver
[    63.968] 	ABI class: X.Org XInput driver, version 21.0
[    63.968] (II) Using input driver 'evdev' for 'Power Button'
[    63.968] (**) Power Button: always reports core events
[    63.968] (**) evdev: Power Button: Device: "/dev/input/event2"
[    63.968] (--) evdev: Power Button: Vendor 0 Product 0x1
[    63.968] (--) evdev: Power Button: Found keys
[    63.968] (II) evdev: Power Button: Configuring as keyboard
[    63.968] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    63.968] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    63.968] (**) Option "xkb_rules" "evdev"
[    63.968] (**) Option "xkb_model" "pc105"
[    63.968] (**) Option "xkb_layout" "fr"
[    63.968] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    63.971] (II) XKB: reuse xkmfile /var/lib/xkb/server-06857493A005679C6E1BB29F32E14DBDFE415BA8.xkm
[    63.972] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    63.972] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    63.972] (**) Power Button: Applying InputClass "keyboard defaults"
[    63.972] (II) Using input driver 'evdev' for 'Power Button'
[    63.972] (**) Power Button: always reports core events
[    63.972] (**) evdev: Power Button: Device: "/dev/input/event1"
[    63.972] (--) evdev: Power Button: Vendor 0 Product 0x1
[    63.972] (--) evdev: Power Button: Found keys
[    63.972] (II) evdev: Power Button: Configuring as keyboard
[    63.972] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    63.972] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    63.973] (**) Option "xkb_rules" "evdev"
[    63.973] (**) Option "xkb_model" "pc105"
[    63.973] (**) Option "xkb_layout" "fr"
[    63.973] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    63.973] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    63.973] (II) No input driver specified, ignoring this device.
[    63.973] (II) This device may have been added with another device file.
[    63.974] (II) config/udev: Adding input device Microsoft Microsoft(R) Compact Optical Mouse (/dev/input/event5)
[    63.974] (**) Microsoft Microsoft(R) Compact Optical Mouse: Applying InputClass "evdev pointer catchall"
[    63.974] (II) Using input driver 'evdev' for 'Microsoft Microsoft(R) Compact Optical Mouse'
[    63.974] (**) Microsoft Microsoft(R) Compact Optical Mouse: always reports core events
[    63.974] (**) evdev: Microsoft Microsoft(R) Compact Optical Mouse: Device: "/dev/input/event5"
[    63.974] (--) evdev: Microsoft Microsoft(R) Compact Optical Mouse: Vendor 0x45e Product 0xa4
[    63.974] (--) evdev: Microsoft Microsoft(R) Compact Optical Mouse: Found 3 mouse buttons
[    63.974] (--) evdev: Microsoft Microsoft(R) Compact Optical Mouse: Found scroll wheel(s)
[    63.974] (--) evdev: Microsoft Microsoft(R) Compact Optical Mouse: Found relative axes
[    63.974] (--) evdev: Microsoft Microsoft(R) Compact Optical Mouse: Found x and y relative axes
[    63.974] (II) evdev: Microsoft Microsoft(R) Compact Optical Mouse: Configuring as mouse
[    63.974] (II) evdev: Microsoft Microsoft(R) Compact Optical Mouse: Adding scrollwheel support
[    63.974] (**) evdev: Microsoft Microsoft(R) Compact Optical Mouse: YAxisMapping: buttons 4 and 5
[    63.974] (**) evdev: Microsoft Microsoft(R) Compact Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    63.974] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:045E:00A4.0001/input/input6/event5"
[    63.974] (II) XINPUT: Adding extended input device "Microsoft Microsoft(R) Compact Optical Mouse" (type: MOUSE, id 8)
[    63.974] (II) evdev: Microsoft Microsoft(R) Compact Optical Mouse: initialized for relative axes.
[    63.974] (**) Microsoft Microsoft(R) Compact Optical Mouse: (accel) keeping acceleration scheme 1
[    63.974] (**) Microsoft Microsoft(R) Compact Optical Mouse: (accel) acceleration profile 0
[    63.975] (**) Microsoft Microsoft(R) Compact Optical Mouse: (accel) acceleration factor: 2.000
[    63.975] (**) Microsoft Microsoft(R) Compact Optical Mouse: (accel) acceleration threshold: 4
[    63.975] (II) config/udev: Adding input device Microsoft Microsoft(R) Compact Optical Mouse (/dev/input/mouse1)
[    63.975] (II) No input driver specified, ignoring this device.
[    63.975] (II) This device may have been added with another device file.
[    63.976] (II) config/udev: Adding input device HP Truevision HD (/dev/input/event11)
[    63.976] (**) HP Truevision HD: Applying InputClass "evdev keyboard catchall"
[    63.976] (**) HP Truevision HD: Applying InputClass "keyboard defaults"
[    63.976] (II) Using input driver 'evdev' for 'HP Truevision HD'
[    63.976] (**) HP Truevision HD: always reports core events
[    63.976] (**) evdev: HP Truevision HD: Device: "/dev/input/event11"
[    63.976] (--) evdev: HP Truevision HD: Vendor 0x4f2 Product 0xb40e
[    63.976] (--) evdev: HP Truevision HD: Found keys
[    63.976] (II) evdev: HP Truevision HD: Configuring as keyboard
[    63.976] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input13/event11"
[    63.976] (II) XINPUT: Adding extended input device "HP Truevision HD" (type: KEYBOARD, id 9)
[    63.976] (**) Option "xkb_rules" "evdev"
[    63.976] (**) Option "xkb_model" "pc105"
[    63.976] (**) Option "xkb_layout" "fr"
[    63.976] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    63.977] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[    63.977] (II) No input driver specified, ignoring this device.
[    63.977] (II) This device may have been added with another device file.
[    63.977] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[    63.977] (II) No input driver specified, ignoring this device.
[    63.977] (II) This device may have been added with another device file.
[    63.977] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[    63.977] (II) No input driver specified, ignoring this device.
[    63.977] (II) This device may have been added with another device file.
[    63.978] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    63.978] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    63.978] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard defaults"
[    63.978] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    63.978] (**) AT Translated Set 2 keyboard: always reports core events
[    63.978] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    63.978] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    63.978] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    63.978] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    63.978] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    63.978] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    63.978] (**) Option "xkb_rules" "evdev"
[    63.978] (**) Option "xkb_model" "pc105"
[    63.978] (**) Option "xkb_layout" "fr"
[    63.978] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    63.979] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[    63.979] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    63.979] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    63.979] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    63.979] (II) LoadModule: "synaptics"
[    63.979] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    63.980] (II) Module synaptics: vendor="X.Org Foundation"
[    63.980] 	compiled for 1.16.0, module version = 1.8.99
[    63.980] 	Module class: X.Org XInput Driver
[    63.980] 	ABI class: X.Org XInput driver, version 21.0
[    63.980] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    63.980] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    63.980] (**) Option "Device" "/dev/input/event4"
[    64.000] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[    64.000] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1326 - 5656 (res 41)
[    64.000] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1200 - 4712 (res 58)
[    64.000] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    64.000] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    64.000] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[    64.000] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    64.000] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    64.001] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    64.001] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    64.020] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event4"
[    64.020] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[    64.020] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    64.020] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    64.020] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[    64.020] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    64.020] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    64.020] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    64.020] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    64.021] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    64.021] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    64.021] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    64.022] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event7)
[    64.022] (II) No input driver specified, ignoring this device.
[    64.022] (II) This device may have been added with another device file.
[    64.022] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[    64.022] (II) No input driver specified, ignoring this device.
[    64.022] (II) This device may have been added with another device file.
[    64.025] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event6)
[    64.025] (**) HP Wireless hotkeys: Applying InputClass "evdev keyboard catchall"
[    64.025] (**) HP Wireless hotkeys: Applying InputClass "keyboard defaults"
[    64.025] (II) Using input driver 'evdev' for 'HP Wireless hotkeys'
[    64.025] (**) HP Wireless hotkeys: always reports core events
[    64.025] (**) evdev: HP Wireless hotkeys: Device: "/dev/input/event6"
[    64.025] (--) evdev: HP Wireless hotkeys: Vendor 0 Product 0
[    64.025] (--) evdev: HP Wireless hotkeys: Found keys
[    64.025] (II) evdev: HP Wireless hotkeys: Configuring as keyboard
[    64.025] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event6"
[    64.025] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 12)
[    64.025] (**) Option "xkb_rules" "evdev"
[    64.025] (**) Option "xkb_model" "pc105"
[    64.025] (**) Option "xkb_layout" "fr"
[    64.025] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    64.026] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event12)
[    64.026] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    64.026] (**) HP WMI hotkeys: Applying InputClass "keyboard defaults"
[    64.026] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    64.026] (**) HP WMI hotkeys: always reports core events
[    64.026] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event12"
[    64.026] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[    64.026] (--) evdev: HP WMI hotkeys: Found keys
[    64.026] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[    64.026] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event12"
[    64.026] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[    64.026] (**) Option "xkb_rules" "evdev"
[    64.026] (**) Option "xkb_model" "pc105"
[    64.027] (**) Option "xkb_layout" "fr"
[    64.027] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    64.033] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[    64.236] (II) XKB: reuse xkmfile /var/lib/xkb/server-34CEB476A3CB596DA76FD7010A029F76732EF824.xkm
[    77.060] (II) XKB: reuse xkmfile /var/lib/xkb/server-88F1D2F50E70F2C4E5D1092ADCAC7898C7E72605.xkm) UnloadModule: "vesa"
[    61.819] (II) Unloading vesa
[    61.820] (==) Depth 24 pixmap format is 32 bpp
[    61.820] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[    61.820] (==) FBDEV(0): Backing store enabled
[    61.820] (==) FBDEV(0): DPMS enabled
[    61.820] (==) RandR enabled
[    61.828] (II) AIGLX: Screen 0 is not DRI2 capable
[    61.828] (EE) AIGLX: reverting to software rendering
[    63.797] (II) AIGLX: Loaded and initialized swrast
[    63.797] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    63.812] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    63.816] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    63.817] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    63.817] (**) Power Button: Applying InputClass "keyboard defaults"
[    63.817] (II) LoadModule: "evdev"
[    63.817] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    63.967] (II) Module evdev: vendor="X.Org Foundation"
[    63.968] 	compiled for 1.16.0, module version = 2.9.0
[    63.968] 	Module class: X.Org XInput Driver
[    63.968] 	ABI class: X.Org XInput driver, version 21.0
[    63.968] (II) Using input driver 'evdev' for 'Power Button'
[    63.968] (**) Power Button: always reports core events
[    63.968] (**) evdev: Power Button: Device: "/dev/input/event2"
[    63.968] (--) evdev: Power Button: Vendor 0 Product 0x1
[    63.968] (--) evdev: Power Button: Found keys
[    63.968] (II) evdev: Power Button: Configuring as keyboard
[    63.968] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    63.968] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    63.968] (**) Option "xkb_rules" "evdev"
[    63.968] (**) Option "xkb_model" "pc105"
[    63.968] (**) Option "xkb_layout" "fr"
[    63.968] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    63.971] (II) XKB: reuse xkmfile /var/lib/xkb/server-06857493A005679C6E1BB29F32E14DBDFE415BA8.xkm
[    63.972] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    63.972] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    63.972] (**) Power Button: Applying InputClass "keyboard defaults"
[    63.972] (II) Using input driver 'evdev' for 'Power Button'
[    63.972] (**) Power Button: always reports core events
[    63.972] (**) evdev: Power Button: Device: "/dev/input/event1"
[    63.972] (--) evdev: Power Button: Vendor 0 Product 0x1
[    63.972] (--) evdev: Power Button: Found keys
[    63.972] (II) evdev: Power Button: Configuring as keyboard
[    63.972] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    63.972] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    63.973] (**) Option "xkb_rules" "evdev"
[    63.973] (**) Option "xkb_model" "pc105"
[    63.973] (**) Option "xkb_layout" "fr"
[    63.973] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    63.973] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    63.973] (II) No input driver specified, ignoring this device.
[    63.973] (II) This device may have been added with another device file.
[    63.974] (II) config/udev: Adding input device Microsoft Microsoft(R) Compact Optical Mouse (/dev/input/event5)
[    63.974] (**) Microsoft Microsoft(R) Compact Optical Mouse: Applying InputClass "evdev pointer catchall"
[    63.974] (II) Using input driver 'evdev' for 'Microsoft Microsoft(R) Compact Optical Mouse'
[    63.974] (**) Microsoft Microsoft(R) Compact Optical Mouse: always reports core events
[    63.974] (**) evdev: Microsoft Microsoft(R) Compact Optical Mouse: Device: "/dev/input/event5"
[    63.974] (--) evdev: Microsoft Microsoft(R) Compact Optical Mouse: Vendor 0x45e Product 0xa4
[    63.974] (--) evdev: Microsoft Microsoft(R) Compact Optical Mouse: Found 3 mouse buttons
[    63.974] (--) evdev: Microsoft Microsoft(R) Compact Optical Mouse: Found scroll wheel(s)
[    63.974] (--) evdev: Microsoft Microsoft(R) Compact Optical Mouse: Found relative axes
[    63.974] (--) evdev: Microsoft Microsoft(R) Compact Optical Mouse: Found x and y relative axes
[    63.974] (II) evdev: Microsoft Microsoft(R) Compact Optical Mouse: Configuring as mouse
[    63.974] (II) evdev: Microsoft Microsoft(R) Compact Optical Mouse: Adding scrollwheel support
[    63.974] (**) evdev: Microsoft Microsoft(R) Compact Optical Mouse: YAxisMapping: buttons 4 and 5
[    63.974] (**) evdev: Microsoft Microsoft(R) Compact Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    63.974] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:045E:00A4.0001/input/input6/event5"
[    63.974] (II) XINPUT: Adding extended input device "Microsoft Microsoft(R) Compact Optical Mouse" (type: MOUSE, id 8)
[    63.974] (II) evdev: Microsoft Microsoft(R) Compact Optical Mouse: initialized for relative axes.
[    63.974] (**) Microsoft Microsoft(R) Compact Optical Mouse: (accel) keeping acceleration scheme 1
[    63.974] (**) Microsoft Microsoft(R) Compact Optical Mouse: (accel) acceleration profile 0
[    63.975] (**) Microsoft Microsoft(R) Compact Optical Mouse: (accel) acceleration factor: 2.000
[    63.975] (**) Microsoft Microsoft(R) Compact Optical Mouse: (accel) acceleration threshold: 4
[    63.975] (II) config/udev: Adding input device Microsoft Microsoft(R) Compact Optical Mouse (/dev/input/mouse1)
[    63.975] (II) No input driver specified, ignoring this device.
[    63.975] (II) This device may have been added with another device file.
[    63.976] (II) config/udev: Adding input device HP Truevision HD (/dev/input/event11)
[    63.976] (**) HP Truevision HD: Applying InputClass "evdev keyboard catchall"
[    63.976] (**) HP Truevision HD: Applying InputClass "keyboard defaults"
[    63.976] (II) Using input driver 'evdev' for 'HP Truevision HD'
[    63.976] (**) HP Truevision HD: always reports core events
[    63.976] (**) evdev: HP Truevision HD: Device: "/dev/input/event11"
[    63.976] (--) evdev: HP Truevision HD: Vendor 0x4f2 Product 0xb40e
[    63.976] (--) evdev: HP Truevision HD: Found keys
[    63.976] (II) evdev: HP Truevision HD: Configuring as keyboard
[    63.976] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input13/event11"
[    63.976] (II) XINPUT: Adding extended input device "HP Truevision HD" (type: KEYBOARD, id 9)
[    63.976] (**) Option "xkb_rules" "evdev"
[    63.976] (**) Option "xkb_model" "pc105"
[    63.976] (**) Option "xkb_layout" "fr"
[    63.976] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    63.977] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[    63.977] (II) No input driver specified, ignoring this device.
[    63.977] (II) This device may have been added with another device file.
[    63.977] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[    63.977] (II) No input driver specified, ignoring this device.
[    63.977] (II) This device may have been added with another device file.
[    63.977] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[    63.977] (II) No input driver specified, ignoring this device.
[    63.977] (II) This device may have been added with another device file.
[    63.978] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    63.978] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    63.978] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard defaults"
[    63.978] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    63.978] (**) AT Translated Set 2 keyboard: always reports core events
[    63.978] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    63.978] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    63.978] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    63.978] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    63.978] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    63.978] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    63.978] (**) Option "xkb_rules" "evdev"
[    63.978] (**) Option "xkb_model" "pc105"
[    63.978] (**) Option "xkb_layout" "fr"
[    63.978] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    63.979] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[    63.979] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    63.979] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    63.979] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    63.979] (II) LoadModule: "synaptics"
[    63.979] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    63.980] (II) Module synaptics: vendor="X.Org Foundation"
[    63.980] 	compiled for 1.16.0, module version = 1.8.99
[    63.980] 	Module class: X.Org XInput Driver
[    63.980] 	ABI class: X.Org XInput driver, version 21.0
[    63.980] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    63.980] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    63.980] (**) Option "Device" "/dev/input/event4"
[    64.000] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[    64.000] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1326 - 5656 (res 41)
[    64.000] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1200 - 4712 (res 58)
[    64.000] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    64.000] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    64.000] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[    64.000] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    64.000] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    64.001] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    64.001] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    64.020] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event4"
[    64.020] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[    64.020] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    64.020] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    64.020] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[    64.020] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    64.020] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    64.020] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    64.020] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    64.021] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    64.021] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    64.021] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    64.022] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event7)
[    64.022] (II) No input driver specified, ignoring this device.
[    64.022] (II) This device may have been added with another device file.
[    64.022] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[    64.022] (II) No input driver specified, ignoring this device.
[    64.022] (II) This device may have been added with another device file.
[    64.025] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event6)
[    64.025] (**) HP Wireless hotkeys: Applying InputClass "evdev keyboard catchall"
[    64.025] (**) HP Wireless hotkeys: Applying InputClass "keyboard defaults"
[    64.025] (II) Using input driver 'evdev' for 'HP Wireless hotkeys'
[    64.025] (**) HP Wireless hotkeys: always reports core events
[    64.025] (**) evdev: HP Wireless hotkeys: Device: "/dev/input/event6"
[    64.025] (--) evdev: HP Wireless hotkeys: Vendor 0 Product 0
[    64.025] (--) evdev: HP Wireless hotkeys: Found keys
[    64.025] (II) evdev: HP Wireless hotkeys: Configuring as keyboard
[    64.025] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event6"
[    64.025] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 12)
[    64.025] (**) Option "xkb_rules" "evdev"
[    64.025] (**) Option "xkb_model" "pc105"
[    64.025] (**) Option "xkb_layout" "fr"
[    64.025] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    64.026] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event12)
[    64.026] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    64.026] (**) HP WMI hotkeys: Applying InputClass "keyboard defaults"
[    64.026] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    64.026] (**) HP WMI hotkeys: always reports core events
[    64.026] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event12"
[    64.026] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[    64.026] (--) evdev: HP WMI hotkeys: Found keys
[    64.026] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[    64.026] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event12"
[    64.026] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[    64.026] (**) Option "xkb_rules" "evdev"
[    64.026] (**) Option "xkb_model" "pc105"
[    64.027] (**) Option "xkb_layout" "fr"
[    64.027] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    64.033] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[    64.236] (II) XKB: reuse xkmfile /var/lib/xkb/server-34CEB476A3CB596DA76FD7010A029F76732EF824.xkm
[    77.060] (II) XKB: reuse xkmfile /var/lib/xkb/server-88F1D2F50E70F2C4E5D1092ADCAC7898C7E72605.xkm

Merci pour toute aide !

Dernière modification par tintinux (Le 10/09/2016, à 09:05)

Ubuntu-MATE 22.04 sur 5 machines de la famille.
Développeur d'applications, dont Gestinux, une compta-gestion libre, multi-plateforme et multi-langues, connectable à une base MySQL, MariaDb ou PostgreSQL, locale ou distante.

Hors ligne

#2 Le 25/08/2016, à 12:11

erresse

Re : Extinction de l'écran après login et activité

Essaie de démarrer sans le mode "recovery" mais en ajoutant le paramètre "nomodeset" au moment du GRUB.
Ta définition d'écran devrait être similaire à celle du mode "recovery", mais tu seras connecté dans ta session normale...
Il y a peut-être un problème de pilote CG alternatif à mettre en place pour ton matériel.

Plus de 50 ans d'informatique, ça en fait des lignes de commandes en console, mais on n'avait pas le choix...
Excellente raison pour, aujourd'hui qu'on le peut, utiliser au maximum les INTERFACES GRAPHIQUES !
Important : Une fois résolu, pensez à clore votre sujet en ajoutant [Résolu] devant le titre du 1er message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Hors ligne

#3 Le 25/08/2016, à 14:12

tintinux

Re : Extinction de l'écran après login et activité

Merci pour ta réponse.

Pour éviter de prendre des risques avec GRUB, est-ce que je dois faire comme dans l'image jointe ? 

http://mrit.com/images/grub.png

Ou sinon, peux-tu préciser ?

Cordialement,

Tintinux

Merci de respecter les règles du forum, la taille des images est limitée.

Dernière modification par HAL (Le 25/08/2016, à 18:27)

Ubuntu-MATE 22.04 sur 5 machines de la famille.
Développeur d'applications, dont Gestinux, une compta-gestion libre, multi-plateforme et multi-langues, connectable à une base MySQL, MariaDb ou PostgreSQL, locale ou distante.

Hors ligne

#4 Le 25/08/2016, à 14:31

erresse

Re : Extinction de l'écran après login et activité

Je ne sais comment tu as affiché cet écran...
L'utilisation "classique" de "nomodeset" :
Lorsque tu es sur l'écran de choix de GRUB, tu tapes la lettre "e" pour éditer les commandes de lancement.
Tu te places sur la ligne où figure "quiet splash" et tu ajoutes l'option "nomodeset" devant le guillemet final (avec un espace entre splash et nomodeset).
Il existe peut-être aussi d'autres manières de procéder, en cochant cette option dans une liste qui s'affiche en appuyant sur une touche Fx.
Puis tu continues le démarrage. Tu verras défiler une flopée de lignes jusqu'à l'apparition de l'écran d'identification pour ouvrir la session.

Plus de 50 ans d'informatique, ça en fait des lignes de commandes en console, mais on n'avait pas le choix...
Excellente raison pour, aujourd'hui qu'on le peut, utiliser au maximum les INTERFACES GRAPHIQUES !
Important : Une fois résolu, pensez à clore votre sujet en ajoutant [Résolu] devant le titre du 1er message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Hors ligne

#5 Le 25/08/2016, à 14:45

tintinux

Re : Extinction de l'écran après login et activité

J'avais affiché l'écran en tapant la lettre "e" sur l'écran de choix de GRUB...

J'ajoute donc nomodeset après quiet splash et un espace, mais on ne le voit pas sur la photo, il n'y a pas de guillemets.

Cela semble régler le problème : mille mercis !

Mais est-ce une solution définitive ? J'aurais bien voulu comprendre pourquoi je dois l'appliquer...

Cordialement,

Dernière modification par tintinux (Le 25/08/2016, à 14:47)

Ubuntu-MATE 22.04 sur 5 machines de la famille.
Développeur d'applications, dont Gestinux, une compta-gestion libre, multi-plateforme et multi-langues, connectable à une base MySQL, MariaDb ou PostgreSQL, locale ou distante.

Hors ligne

#6 Le 25/08/2016, à 15:30

erresse

Re : Extinction de l'écran après login et activité

Non, ce n'est pas une solution définitive, elle ne vaut que pour la connexion en cours.
Tu peux la pérenniser si elle te satisfait, en insérant ce paramètre "nomodeset" dans le fichier /etc/default/grub, toujours sur la ligne avec "quiet splash", suivi pour que la modification soit prise en compte de :

sudo update-grub

Mais en général, cette option est utilisée pour avoir une interface graphique (dégradée) permettant de travailler plus à l'aise et d'installer un pilote de carte graphique plus approprié à ton matériel.
Regarde dans "Logiciels et mises à jour", onglet "Pilotes additionnels" (ou directement un choix du menu "Pilotes additionnels"). Tu attends un petit moment, car la recherche n'est pas instantanée... Si des pilotes existent pour ton matériel, le système te les propose, à toi de choisir celui qui semble le plus adéquat.

Plus de 50 ans d'informatique, ça en fait des lignes de commandes en console, mais on n'avait pas le choix...
Excellente raison pour, aujourd'hui qu'on le peut, utiliser au maximum les INTERFACES GRAPHIQUES !
Important : Une fois résolu, pensez à clore votre sujet en ajoutant [Résolu] devant le titre du 1er message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Hors ligne

#7 Le 25/08/2016, à 16:08

tintinux

Re : Extinction de l'écran après login et activité

Ok, merci.

J'avais déjà regardé dans les pilotes additionnels, mais il n'y a rien concernant la carte graphique, seulement un pilote Wifi.

Ubuntu-MATE 22.04 sur 5 machines de la famille.
Développeur d'applications, dont Gestinux, une compta-gestion libre, multi-plateforme et multi-langues, connectable à une base MySQL, MariaDb ou PostgreSQL, locale ou distante.

Hors ligne

#8 Le 10/09/2016, à 09:20

tintinux

Re : Extinction de l'écran après login et activité

Bonjour

Après avoir mis le paramètre nomodeset de manière définitive, selon les conseils, le PC a bien fonctionné pendant 2 semaines.

Puis, soudain, sans même que je fasse de mise à jour (je n'avais pas de connexion à l'internet), après un reboot et sélection d'Ubuntu standard sur le menu Grub, plus aucun affichage : le menu Grub reste affiché et rien ne l'efface ni ne s'affiche.  Le souci est donc en amont du problème initial, mais très similaire.

En démarrant en recovery mode, toujours avec le message avertissant que des pilotes d'écran ne pourront pas être chargés (une chance !), il n'y a aucun problème et la définition est tout aussi bonne qu'avant. Mais c'est plus compliqué...

J'ai revérifié qu'il n'y a pas de pilote tiers activés ni disponible, et je n'ai rien changé à la configuration depuis ce qui a été indiqué au début du fil.

Est-ce qu'il y aurait au moins une possibilité d'avoir par défaut la même chose que le recovery mode sans taper 5 ou 6 fois sur une touche comme l'impose ce mode, sans charger le pilote défectueux donc  ?

Merci pour votre aide !

Dernière modification par tintinux (Le 10/09/2016, à 09:21)

Ubuntu-MATE 22.04 sur 5 machines de la famille.
Développeur d'applications, dont Gestinux, une compta-gestion libre, multi-plateforme et multi-langues, connectable à une base MySQL, MariaDb ou PostgreSQL, locale ou distante.

Hors ligne

Pages : 1