Pages : 1
#1 Le 16/08/2016, à 23:35
- calixtus06
[ABANDONNE] long démarrage d'ubuntu
Bonjour, je suis archi débutant . Mon ubuntu studio a une séquence de boot un chouille longue.
Avec boot-info, j'ai obtenu ce rapport:
Si quelqu'un peut m'aider ça serait sympa
merci d'avance
Nico
Dernière modification par calixtus06 (Le 30/11/2018, à 07:54)
Hors ligne
#2 Le 17/08/2016, à 12:20
- Bougron
Re : [ABANDONNE] long démarrage d'ubuntu
Bonjour
Pour analyser un démarrage qui se fait correctement, donnes le retour de
dmesg > TRACE.txt
gedit TRACE.txtet
systemd-analyze blameN'oublies pas de mettre en forme en utilisant le 11eme icône <> de cette grille de saisie après avoir sélectionné ce que tu viens de copier
Dernière modification par Bougron (Le 17/08/2016, à 12:22)
Hors ligne
#3 Le 24/08/2016, à 18:09
- calixtus06
Re : [ABANDONNE] long démarrage d'ubuntu
dmesg > TRACE.txtdonne un retour à l'invit de commande
nicolas@nicolas-A7Sv:~$gedit TRACE.txtdonne
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-34-lowlatency (buildd@lgw01-20) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2.1) ) #53-Ubuntu SMP PREEMPT Wed Jul 27 19:23:26 UTC 2016 (Ubuntu 4.4.0-34.53-lowlatency 4.4.15)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.4.0-34-lowlatency root=/dev/mapper/ubuntu--studio--vg-root ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffa7fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dffa8000-0x00000000dffaffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dffb0000-0x00000000dffbfeff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dffbff00-0x00000000dffeffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dfff0000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: ASUSTeK Computer Inc. K70IO /K70IO , BIOS 208 06/22/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask FE0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 1, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 2, base: 4GB, range: 512MB, type WB
[ 0.000000] total RAM covered: 4096M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 2, base: 4GB, range: 512MB, type WB
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdffa8 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] BRK [0x021f3000, 0x021f3fff] PGTABLE
[ 0.000000] BRK [0x021f4000, 0x021f4fff] PGTABLE
[ 0.000000] BRK [0x021f5000, 0x021f5fff] PGTABLE
[ 0.000000] BRK [0x021f6000, 0x021f6fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33790000-0x35bbffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FA420 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0x00000000DFFB0100 00007C (v01 _ASUS_ Notebook 20090622 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000DFFB0290 0000F4 (v03 062209 FACP1546 20090622 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x00000000DFFB06F0 00E483 (v01 K70IO K70IO208 00000208 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000DFFBFF00 000040
[ 0.000000] ACPI: FACS 0x00000000DFFBFF00 000040
[ 0.000000] ACPI: APIC 0x00000000DFFB0390 000080 (v01 062209 APIC1546 20090622 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000DFFB0450 00003C (v01 062209 OEMMCFG 20090622 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x00000000DFFB0490 000176 (v01 _ASUS_ Notebook 20090622 MSFT 00000097)
[ 0.000000] ACPI: WDRT 0x00000000DFFB0610 000047 (v01 062209 NV-WDRT 20090622 MSFT 00000097)
[ 0.000000] ACPI: ECDT 0x00000000DFFB0690 000054 (v01 062209 OEMECDT 20090622 MSFT 00000097)
[ 0.000000] ACPI: DBGP 0x00000000DFFB0410 000034 (v01 062209 DBGP1546 20090622 MSFT 00000097)
[ 0.000000] ACPI: BOOT 0x00000000DFFB0660 000028 (v01 062209 BOOT1546 20090622 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000DFFBFF40 000079 (v01 062209 OEMB1546 20090622 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DFFBF6F0 000038 (v01 062209 OEMHPET0 20090622 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000DFFC0D30 0004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x11fff7000-0x11fffbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000011fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dffa7fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
[ 0.000000] On node 0 totalpages: 1048389
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14271 pages used for memmap
[ 0.000000] DMA32 zone: 913320 pages, LIFO batch:31
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdffa8000-0xdffaffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdffb0000-0xdffbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdffbf000-0xdffbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdffc0000-0xdffeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfff0000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff6fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff700000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 34 pages/cpu @ffff88011fc00000 s98392 r8192 d32680 u524288
[ 0.000000] pcpu-alloc: s98392 r8192 d32680 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031985
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-34-lowlatency root=/dev/mapper/ubuntu--studio--vg-root ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4005596K/4193556K available (8447K kernel code, 1285K rwdata, 3944K rodata, 1424K init, 1292K bss, 187960K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16640 nr_irqs:456 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2099.987 MHz processor
[ 0.001015] Calibrating delay loop (skipped), value calculated using timer frequency.. 4199.97 BogoMIPS (lpj=2099987)
[ 0.001019] pid_max: default: 32768 minimum: 301
[ 0.001029] ACPI: Core revision 20150930
[ 0.015937] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.015968] Security Framework initialized
[ 0.015971] Yama: becoming mindful.
[ 0.016007] AppArmor: AppArmor initialized
[ 0.016407] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.018803] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.020111] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.020121] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.020534] Initializing cgroup subsys io
[ 0.020541] Initializing cgroup subsys memory
[ 0.020555] Initializing cgroup subsys devices
[ 0.020560] Initializing cgroup subsys freezer
[ 0.020564] Initializing cgroup subsys net_cls
[ 0.020568] Initializing cgroup subsys perf_event
[ 0.020572] Initializing cgroup subsys net_prio
[ 0.020576] Initializing cgroup subsys hugetlb
[ 0.020581] Initializing cgroup subsys pids
[ 0.020611] CPU: Physical Processor ID: 0
[ 0.020612] CPU: Processor Core ID: 0
[ 0.020615] mce: CPU supports 6 MCE banks
[ 0.020626] CPU0: Thermal monitoring enabled (TM2)
[ 0.020630] process: using mwait in idle threads
[ 0.020637] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.020638] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.021091] Freeing SMP alternatives memory: 28K (ffffffff820a7000 - ffffffff820ae000)
[ 0.023006] ftrace: allocating 31992 entries in 125 pages
[ 0.033165] smpboot: Max logical packages: 2
[ 0.033171] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.034309] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.045000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.045000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.045000] ... version: 2
[ 0.045000] ... bit width: 40
[ 0.045000] ... generic registers: 2
[ 0.045000] ... value mask: 000000ffffffffff
[ 0.045000] ... max period: 000000007fffffff
[ 0.045000] ... fixed-purpose events: 3
[ 0.045000] ... event mask: 0000000700000003
[ 0.053021] x86: Booting SMP configuration:
[ 0.053026] .... node #0, CPUs: #1
[ 0.054158] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.054174] x86: Booted up 1 node, 2 CPUs
[ 0.054177] smpboot: Total of 2 processors activated (8399.94 BogoMIPS)
[ 0.056125] devtmpfs: initialized
[ 0.059996] evm: security.selinux
[ 0.059998] evm: security.SMACK64
[ 0.060006] evm: security.SMACK64EXEC
[ 0.060008] evm: security.SMACK64TRANSMUTE
[ 0.060009] evm: security.SMACK64MMAP
[ 0.060011] evm: security.ima
[ 0.060012] evm: security.capability
[ 0.060083] PM: Registering ACPI NVS region [mem 0xdffa8000-0xdffaffff] (32768 bytes)
[ 0.060085] PM: Registering ACPI NVS region [mem 0xdffbff00-0xdffeffff] (196864 bytes)
[ 0.060181] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.060267] pinctrl core: initialized pinctrl subsystem
[ 0.060460] RTC time: 15:48:54, date: 08/24/16
[ 0.060605] NET: Registered protocol family 16
[ 0.064002] cpuidle: using governor ladder
[ 0.068002] cpuidle: using governor menu
[ 0.068007] PCCT header not found.
[ 0.068052] Simple Boot Flag at 0xef set to 0x1
[ 0.068086] ACPI: bus type PCI registered
[ 0.068089] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.068180] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
[ 0.068183] PCI: not using MMCONFIG
[ 0.068185] PCI: Using configuration type 1 for base access
[ 0.073112] ACPI: Added _OSI(Module Device)
[ 0.073115] ACPI: Added _OSI(Processor Device)
[ 0.073117] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.073118] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.076093] ACPI : EC: EC description table is found, configuring boot EC
[ 0.076183] ACPI : EC: EC started
[ 0.078083] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.081134] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.082304] ACPI: Dynamic OEM Table Load:
[ 0.082312] ACPI: SSDT 0xFFFF8800DB805000 000206 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.083035] ACPI: Dynamic OEM Table Load:
[ 0.083043] ACPI: SSDT 0xFFFF88011A484000 0007FB (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.083947] ACPI: Dynamic OEM Table Load:
[ 0.083954] ACPI: SSDT 0xFFFF88011A577600 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.084561] ACPI: Dynamic OEM Table Load:
[ 0.084567] ACPI: SSDT 0xFFFF88011A571D80 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.085442] ACPI: Interpreter enabled
[ 0.085451] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.085456] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.085475] ACPI: (supports S0 S3 S4 S5)
[ 0.085477] ACPI: Using IOAPIC for interrupt routing
[ 0.085512] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
[ 0.086499] PCI: MMCONFIG at [mem 0xfc000000-0xfdffffff] reserved in ACPI motherboard resources
[ 0.086506] pmd_set_huge: Cannot satisfy [mem 0xfc000000-0xfc200000] with a huge-page mapping due to MTRR override.
[ 0.086577] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.097668] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.097677] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.097895] acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PCIeCapability]
[ 0.097999] acpi PNP0A03:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.098010] acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.098013] acpi PNP0A03:00: _OSC: platform willing to grant [PME AER]
[ 0.098015] acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.098032] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
[ 0.098343] PCI host bridge to bus 0000:00
[ 0.098347] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.098350] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.098352] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.098355] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.098357] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfbffffff window]
[ 0.098360] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfebfffff window]
[ 0.098363] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.098380] pci 0000:00:00.0: [10de:0a86] type 00 class 0x060000
[ 0.098567] pci 0000:00:00.1: [10de:0a88] type 00 class 0x050000
[ 0.098765] pci 0000:00:03.0: [10de:0aae] type 00 class 0x060100
[ 0.098778] pci 0000:00:03.0: reg 0x10: [io 0x4f00-0x4fff]
[ 0.098905] pci 0000:00:03.1: [10de:0aa4] type 00 class 0x050000
[ 0.099063] pci 0000:00:03.2: [10de:0aa2] type 00 class 0x0c0500
[ 0.099084] pci 0000:00:03.2: reg 0x10: [io 0x4900-0x493f]
[ 0.099108] pci 0000:00:03.2: reg 0x20: [io 0x4d00-0x4d3f]
[ 0.099116] pci 0000:00:03.2: reg 0x24: [io 0x4e00-0x4e3f]
[ 0.099146] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.099196] pci 0000:00:03.2: System wakeup disabled by ACPI
[ 0.099255] pci 0000:00:03.3: [10de:0a89] type 00 class 0x050000
[ 0.099452] pci 0000:00:03.5: [10de:0aa3] type 00 class 0x0b4000
[ 0.099478] pci 0000:00:03.5: reg 0x10: [mem 0xf7f80000-0xf7ffffff]
[ 0.099678] pci 0000:00:04.0: [10de:0aa5] type 00 class 0x0c0310
[ 0.099696] pci 0000:00:04.0: reg 0x10: [mem 0xf7f7f000-0xf7f7ffff]
[ 0.099747] pci 0000:00:04.0: supports D1 D2
[ 0.099749] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.099794] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.099853] pci 0000:00:04.1: [10de:0aa6] type 00 class 0x0c0320
[ 0.099873] pci 0000:00:04.1: reg 0x10: [mem 0xf7f7ec00-0xf7f7ecff]
[ 0.099929] pci 0000:00:04.1: supports D1 D2
[ 0.099931] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.099977] pci 0000:00:04.1: System wakeup disabled by ACPI
[ 0.100049] pci 0000:00:06.0: [10de:0aa7] type 00 class 0x0c0310
[ 0.100066] pci 0000:00:06.0: reg 0x10: [mem 0xf7f7d000-0xf7f7dfff]
[ 0.100118] pci 0000:00:06.0: supports D1 D2
[ 0.100120] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.100166] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 0.100222] pci 0000:00:06.1: [10de:0aa9] type 00 class 0x0c0320
[ 0.100243] pci 0000:00:06.1: reg 0x10: [mem 0xf7f7e800-0xf7f7e8ff]
[ 0.100298] pci 0000:00:06.1: supports D1 D2
[ 0.100301] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.100346] pci 0000:00:06.1: System wakeup disabled by ACPI
[ 0.100412] pci 0000:00:08.0: [10de:0ac0] type 00 class 0x040300
[ 0.100430] pci 0000:00:08.0: reg 0x10: [mem 0xf7f78000-0xf7f7bfff]
[ 0.100481] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.100526] pci 0000:00:08.0: System wakeup disabled by ACPI
[ 0.100582] pci 0000:00:09.0: [10de:0aab] type 01 class 0x060401
[ 0.100660] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.100715] pci 0000:00:0b.0: [10de:0ab9] type 00 class 0x010601
[ 0.100735] pci 0000:00:0b.0: reg 0x10: [io 0xc080-0xc087]
[ 0.100742] pci 0000:00:0b.0: reg 0x14: [io 0xc000-0xc003]
[ 0.100749] pci 0000:00:0b.0: reg 0x18: [io 0xbc00-0xbc07]
[ 0.100756] pci 0000:00:0b.0: reg 0x1c: [io 0xb880-0xb883]
[ 0.100763] pci 0000:00:0b.0: reg 0x20: [io 0xb800-0xb80f]
[ 0.100770] pci 0000:00:0b.0: reg 0x24: [mem 0xf7f76000-0xf7f77fff]
[ 0.100907] pci 0000:00:0c.0: [10de:0ac4] type 01 class 0x060400
[ 0.101135] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.101209] pci 0000:00:0c.0: System wakeup disabled by ACPI
[ 0.101305] pci 0000:00:15.0: [10de:0ac6] type 01 class 0x060400
[ 0.101526] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.101599] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.101682] pci 0000:00:16.0: [10de:0ac7] type 01 class 0x060400
[ 0.101903] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.101976] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.102117] pci 0000:00:09.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.102125] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.102128] pci 0000:00:09.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.102131] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.102133] pci 0000:00:09.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.102136] pci 0000:00:09.0: bridge window [mem 0xe0000000-0xfbffffff window] (subtractive decode)
[ 0.102138] pci 0000:00:09.0: bridge window [mem 0xfe000000-0xfebfffff window] (subtractive decode)
[ 0.102283] pci 0000:02:00.0: [10de:0653] type 00 class 0x030000
[ 0.102333] pci 0000:02:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
[ 0.102359] pci 0000:02:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.102385] pci 0000:02:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.102403] pci 0000:02:00.0: reg 0x24: [io 0xdc00-0xdc7f]
[ 0.102423] pci 0000:02:00.0: reg 0x30: [mem 0xfaf80000-0xfaffffff pref]
[ 0.105027] pci 0000:00:0c.0: PCI bridge to [bus 02]
[ 0.105043] pci 0000:00:0c.0: bridge window [io 0xd000-0xdfff]
[ 0.105052] pci 0000:00:0c.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.105067] pci 0000:00:0c.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.105198] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.105238] pci 0000:03:00.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.105267] pci 0000:03:00.0: reg 0x18: [mem 0xfeaff000-0xfeafffff 64bit]
[ 0.105299] pci 0000:03:00.0: reg 0x30: [mem 0xfeac0000-0xfeadffff pref]
[ 0.105366] pci 0000:03:00.0: supports D1 D2
[ 0.105368] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.105447] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.105463] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.105477] pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
[ 0.105486] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.106038] pci 0000:04:00.0: [168c:002b] type 00 class 0x028000
[ 0.106075] pci 0000:04:00.0: reg 0x10: [mem 0xfebf0000-0xfebfffff 64bit]
[ 0.106172] pci 0000:04:00.0: supports D1
[ 0.106175] pci 0000:04:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.108018] pci 0000:00:16.0: PCI bridge to [bus 04]
[ 0.108040] pci 0000:00:16.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.108584] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.108708] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.108828] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.108949] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.109082] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *15
[ 0.109203] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[ 0.109323] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[ 0.109442] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[ 0.109562] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[ 0.109681] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[ 0.109800] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[ 0.109920] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[ 0.110049] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
[ 0.110171] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[ 0.110291] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[ 0.110411] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[ 0.110533] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *11
[ 0.110654] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[ 0.110774] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[ 0.110894] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[ 0.111025] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *9
[ 0.111146] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[ 0.111266] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[ 0.111386] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[ 0.111506] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[ 0.111625] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[ 0.111745] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[ 0.111865] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[ 0.111985] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[ 0.112116] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[ 0.112236] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[ 0.112356] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[ 0.112478] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[ 0.112599] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 0.112718] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[ 0.112840] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[ 0.112959] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
[ 0.113091] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *14
[ 0.113213] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
[ 0.113333] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.113466] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.113588] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *9
[ 0.113709] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *15
[ 0.113832] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
[ 0.113951] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
[ 0.114082] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
[ 0.114205] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11
[ 0.114328] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9
[ 0.114448] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *0, disabled.
[ 0.114568] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *0, disabled.
[ 0.114868] ACPI : EC: GPE = 0x27, I/O: command/status = 0x66, data = 0x62
[ 0.115026] vgaarb: setting as boot device: PCI:0000:02:00.0
[ 0.115026] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.115026] vgaarb: loaded
[ 0.115028] vgaarb: bridge control possible 0000:02:00.0
[ 0.115381] SCSI subsystem initialized
[ 0.115404] libata version 3.00 loaded.
[ 0.115404] ACPI: bus type USB registered
[ 0.115404] usbcore: registered new interface driver usbfs
[ 0.115404] usbcore: registered new interface driver hub
[ 0.115404] usbcore: registered new device driver usb
[ 0.116186] PCI: Using ACPI for IRQ routing
[ 0.117083] PCI: pci_cache_line_size set to 64 bytes
[ 0.117170] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.117172] e820: reserve RAM buffer [mem 0xdffa8000-0xdfffffff]
[ 0.117340] NetLabel: Initializing
[ 0.117342] NetLabel: domain hash size = 128
[ 0.117343] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.117362] NetLabel: unlabeled traffic allowed by default
[ 0.117391] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.117391] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.117391] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.121026] clocksource: Switched to clocksource hpet
[ 0.132430] AppArmor: AppArmor Filesystem Enabled
[ 0.132545] pnp: PnP ACPI init
[ 0.132727] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.132810] pnp 00:01: Plug and Play ACPI device, IDs ETD0001 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.133222] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.133226] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.133229] system 00:02: [io 0x4000-0x407f] could not be reserved
[ 0.133232] system 00:02: [io 0x4080-0x40ff] has been reserved
[ 0.133235] system 00:02: [io 0x4400-0x447f] has been reserved
[ 0.133237] system 00:02: [io 0x4480-0x44ff] has been reserved
[ 0.133240] system 00:02: [io 0x4800-0x487f] has been reserved
[ 0.133243] system 00:02: [io 0x4880-0x48ff] has been reserved
[ 0.133246] system 00:02: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.133249] system 00:02: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.133251] system 00:02: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.133254] system 00:02: [mem 0xfefe2000-0xfefe3fff] has been reserved
[ 0.133257] system 00:02: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.133260] system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.133265] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.133351] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.133447] system 00:04: [io 0x0250-0x0253] has been reserved
[ 0.133450] system 00:04: [io 0x0256-0x025f] has been reserved
[ 0.133453] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.133456] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.133460] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.133568] system 00:05: [io 0x5000-0x507f] has been reserved
[ 0.133575] system 00:05: [io 0x5080-0x50ff] has been reserved
[ 0.133579] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.133679] system 00:06: [mem 0xfc000000-0xfdffffff] has been reserved
[ 0.133684] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.133949] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.133953] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.133956] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.133959] system 00:07: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.133962] system 00:07: [mem 0xfc000000-0xffffffff] could not be reserved
[ 0.133966] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.134851] pnp: PnP ACPI: found 8 devices
[ 0.142440] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.142517] pci 0000:00:09.0: PCI bridge to [bus 01]
[ 0.142528] pci 0000:00:0c.0: PCI bridge to [bus 02]
[ 0.142534] pci 0000:00:0c.0: bridge window [io 0xd000-0xdfff]
[ 0.142545] pci 0000:00:0c.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.142553] pci 0000:00:0c.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.142567] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.142573] pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
[ 0.142584] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.142603] pci 0000:00:16.0: PCI bridge to [bus 04]
[ 0.142614] pci 0000:00:16.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.142635] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.142637] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.142640] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.142642] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.142645] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfbffffff window]
[ 0.142647] pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff window]
[ 0.142650] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
[ 0.142652] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
[ 0.142655] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.142657] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.142660] pci_bus 0000:01: resource 8 [mem 0xe0000000-0xfbffffff window]
[ 0.142662] pci_bus 0000:01: resource 9 [mem 0xfe000000-0xfebfffff window]
[ 0.142665] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.142667] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.142670] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.142672] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.142675] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.142677] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.142721] NET: Registered protocol family 2
[ 0.142973] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.143128] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.143342] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.143415] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.143445] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.143529] NET: Registered protocol family 1
[ 0.143860] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 0.228334] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 0.228629] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
[ 0.290300] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20
[ 0.290490] pci 0000:02:00.0: Video device with shadowed ROM
[ 0.290505] PCI: CLS 64 bytes, default 64
[ 0.290584] Trying to unpack rootfs image as initramfs...
[ 1.068931] Freeing initrd memory: 37056K (ffff880033790000 - ffff880035bc0000)
[ 1.068952] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.068955] software IO TLB [mem 0xdbfa8000-0xdffa8000] (64MB) mapped at [ffff8800dbfa8000-ffff8800dffa7fff]
[ 1.069222] Scanning for low memory corruption every 60 seconds
[ 1.069783] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.069849] audit: initializing netlink subsys (disabled)
[ 1.069885] audit: type=2000 audit(1472053734.069:1): initialized
[ 1.070350] Initialise system trusted keyring
[ 1.070537] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.073089] zbud: loaded
[ 1.073342] VFS: Disk quotas dquot_6.6.0
[ 1.073396] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.073814] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.074219] fuse init (API version 7.23)
[ 1.074431] Key type big_key registered
[ 1.074455] Allocating IMA MOK and blacklist keyrings.
[ 1.075028] Key type asymmetric registered
[ 1.075032] Asymmetric key parser 'x509' registered
[ 1.075088] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.075129] io scheduler noop registered
[ 1.075133] io scheduler deadline registered (default)
[ 1.075184] io scheduler cfq registered
[ 1.075620] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
[ 1.075977] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
[ 1.076331] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
[ 1.076469] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.076479] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.076526] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 1.076527] vesafb: scrolling: redraw
[ 1.076530] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.076546] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90000800000, using 1216k, total 1216k
[ 1.076668] Console: switching to colour frame buffer device 80x30
[ 1.076683] fb0: VESA VGA frame buffer device
[ 1.076705] intel_idle: does not run on family 6 model 23
[ 1.076827] ACPI: AC Adapter [AC0] (on-line)
[ 1.076945] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.076950] ACPI: Power Button [PWRB]
[ 1.077024] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.077028] ACPI: Sleep Button [SLPB]
[ 1.077085] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 1.220031] ACPI: Lid Switch [LID]
[ 1.220091] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.220094] ACPI: Power Button [PWRF]
[ 1.220736] Monitor-Mwait will be used to enter C-1 state
[ 1.220743] Monitor-Mwait will be used to enter C-3 state
[ 1.220747] Monitor-Mwait will be used to enter C-3 state
[ 1.220758] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.220770] ACPI: acpi_idle registered with cpuidle
[ 1.229995] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.229999] ACPI: Thermal Zone [THRM] (62 C)
[ 1.230065] GHES: HEST is not enabled!
[ 1.230190] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.233104] Linux agpgart interface v0.103
[ 1.238977] brd: module loaded
[ 1.242165] loop: module loaded
[ 1.242480] libphy: Fixed MDIO Bus: probed
[ 1.242484] tun: Universal TUN/TAP device driver, 1.6
[ 1.242485] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.242554] PPP generic driver version 2.4.2
[ 1.242654] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.242660] ehci-pci: EHCI PCI platform driver
[ 1.242820] ehci-pci 0000:00:04.1: EHCI Host Controller
[ 1.242831] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 1.242842] ehci-pci 0000:00:04.1: debug port 1
[ 1.242878] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
[ 1.242941] ehci-pci 0000:00:04.1: irq 22, io mem 0xf7f7ec00
[ 1.248044] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 1.248145] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.248148] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.248151] usb usb1: Product: EHCI Host Controller
[ 1.248153] usb usb1: Manufacturer: Linux 4.4.0-34-lowlatency ehci_hcd
[ 1.248155] usb usb1: SerialNumber: 0000:00:04.1
[ 1.248340] hub 1-0:1.0: USB hub found
[ 1.248350] hub 1-0:1.0: 11 ports detected
[ 1.250318] ehci-pci 0000:00:06.1: EHCI Host Controller
[ 1.250326] ehci-pci 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 1.250335] ehci-pci 0000:00:06.1: debug port 1
[ 1.250362] ehci-pci 0000:00:06.1: cache line size of 64 is not supported
[ 1.250427] ehci-pci 0000:00:06.1: irq 20, io mem 0xf7f7e800
[ 1.257034] ehci-pci 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 1.257089] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.257092] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.257095] usb usb2: Product: EHCI Host Controller
[ 1.257097] usb usb2: Manufacturer: Linux 4.4.0-34-lowlatency ehci_hcd
[ 1.257100] usb usb2: SerialNumber: 0000:00:06.1
[ 1.257270] hub 2-0:1.0: USB hub found
[ 1.257278] hub 2-0:1.0: 5 ports detected
[ 1.258327] ehci-platform: EHCI generic platform driver
[ 1.258349] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.258355] ohci-pci: OHCI PCI platform driver
[ 1.258441] ohci-pci 0000:00:04.0: OHCI PCI host controller
[ 1.258449] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 1.258549] ohci-pci 0000:00:04.0: irq 23, io mem 0xf7f7f000
[ 1.272040] ACPI: Battery Slot [BAT0] (battery present)
[ 1.311123] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.311126] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.311129] usb usb3: Product: OHCI PCI host controller
[ 1.311131] usb usb3: Manufacturer: Linux 4.4.0-34-lowlatency ohci_hcd
[ 1.311133] usb usb3: SerialNumber: 0000:00:04.0
[ 1.311301] hub 3-0:1.0: USB hub found
[ 1.311312] hub 3-0:1.0: 11 ports detected
[ 1.311852] ohci-pci 0000:00:06.0: OHCI PCI host controller
[ 1.311860] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 1.311970] ohci-pci 0000:00:06.0: irq 21, io mem 0xf7f7d000
[ 1.364079] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.364083] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.364085] usb usb4: Product: OHCI PCI host controller
[ 1.364088] usb usb4: Manufacturer: Linux 4.4.0-34-lowlatency ohci_hcd
[ 1.364090] usb usb4: SerialNumber: 0000:00:06.0
[ 1.364242] hub 4-0:1.0: USB hub found
[ 1.364252] hub 4-0:1.0: 5 ports detected
[ 1.364589] ohci-platform: OHCI generic platform driver
[ 1.364606] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.364697] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.370074] i8042: Detected active multiplexing controller, rev 1.1
[ 1.371809] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.371862] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.371905] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.371948] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.371992] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.372182] mousedev: PS/2 mouse device common for all mice
[ 1.372532] rtc_cmos 00:03: RTC can wake from S4
[ 1.372831] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.372941] rtc_cmos 00:03: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.372952] i2c /dev entries driver
[ 1.373048] device-mapper: uevent: version 1.0.3
[ 1.373148] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.373171] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.373630] NET: Registered protocol family 10
[ 1.373879] NET: Registered protocol family 17
[ 1.373896] Key type dns_resolver registered
[ 1.374139] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 1.374151] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 1.374198] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.374424] registered taskstats version 1
[ 1.374440] Loading compiled-in X.509 certificates
[ 1.375739] Loaded X.509 cert 'Build time autogenerated kernel key: 263a23b905ea6ec0988e37c3ac39f5914e24ba10'
[ 1.375763] zswap: loaded using pool lzo/zbud
[ 1.378401] Key type trusted registered
[ 1.382946] Key type encrypted registered
[ 1.382957] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.382962] ima: No TPM chip found, activating TPM-bypass!
[ 1.382993] evm: HMAC attrs: 0x1
[ 1.383460] Magic number: 12:195:842
[ 1.383664] rtc_cmos 00:03: setting system clock to 2016-08-24 15:48:55 UTC (1472053735)
[ 1.384561] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.384563] EDD information not available.
[ 1.384640] PM: Hibernation image not present or could not be loaded.
[ 1.386511] Freeing unused kernel memory: 1424K (ffffffff81f43000 - ffffffff820a7000)
[ 1.386514] Write protecting the kernel read-only data: 14336k
[ 1.387960] Freeing unused kernel memory: 1780K (ffff880001843000 - ffff880001a00000)
[ 1.388585] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
[ 1.413795] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.414811] random: udevadm urandom read with 10 bits of entropy available
[ 1.522975] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.528241] wmi: Mapper loaded
[ 1.552071] usb 1-4: new high-speed USB device number 2 using ehci-pci
[ 1.592328] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.599614] acpi device:2b: registered as cooling_device2
[ 1.599712] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:28/LNXVIDEO:00/input/input9
[ 1.664786] ahci 0000:00:0b.0: version 3.0
[ 1.665127] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[ 1.665162] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
[ 1.665282] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
[ 1.665286] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs
[ 1.669856] usb 1-4: New USB device found, idVendor=04a9, idProduct=1751
[ 1.669862] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.669865] usb 1-4: Product: MG2100 series
[ 1.669867] usb 1-4: Manufacturer: Canon
[ 1.669869] usb 1-4: SerialNumber: 706A23
[ 1.679045] scsi host0: ahci
[ 1.682793] [drm] Initialized drm 1.1.0 20060810
[ 1.685092] scsi host1: ahci
[ 1.690037] scsi host2: ahci
[ 1.691110] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.691124] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.691382] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19
[ 1.691786] r8169 0000:03:00.0 eth0: RTL8168b/8111b at 0xffffc9000000e000, 00:26:18:62:c0:c9, XID 18000000 IRQ 25
[ 1.691789] r8169 0000:03:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 1.693044] scsi host3: ahci
[ 1.698061] scsi host4: ahci
[ 1.702051] scsi host5: ahci
[ 1.702184] ata1: SATA max UDMA/133 abar m8192@0xf7f76000 port 0xf7f76100 irq 24
[ 1.702188] ata2: SATA max UDMA/133 abar m8192@0xf7f76000 port 0xf7f76180 irq 24
[ 1.702190] ata3: DUMMY
[ 1.702192] ata4: DUMMY
[ 1.702194] ata5: DUMMY
[ 1.702196] ata6: DUMMY
[ 1.774522] usb 1-5: new high-speed USB device number 3 using ehci-pci
[ 1.838141] MXM: GUID detected in BIOS
[ 1.838251] ACPI Warning: \_SB_.PCI0.XVR0.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 1.838304] ACPI: \_SB_.PCI0.XVR0.VGA_: failed to evaluate _DSM
[ 1.838598] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 18
[ 1.838737] checking generic (f9000000 130000) vs hw (e0000000 10000000)
[ 1.838739] checking generic (f9000000 130000) vs hw (f8000000 2000000)
[ 1.838741] fb: switching to nouveaufb from VESA VGA
[ 1.838791] Console: switching to colour dummy device 80x25
[ 1.840300] nouveau 0000:02:00.0: NVIDIA G96 (096980c1)
[ 1.935987] usb 1-5: New USB device found, idVendor=064e, idProduct=a116
[ 1.935993] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.935996] usb 1-5: Product: USB2.0 UVC 1.3M WebCam
[ 1.935999] usb 1-5: Manufacturer: SuYin
[ 1.936017] usb 1-5: SerialNumber: CN1316-S30B-MI033-VS-R03.02.04
[ 1.969822] nouveau 0000:02:00.0: bios: version 62.94.79.00.0b
[ 2.011061] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.013475] nouveau 0000:02:00.0: bios: M0203T not found
[ 2.013481] nouveau 0000:02:00.0: bios: M0203E not matched!
[ 2.013484] nouveau 0000:02:00.0: fb: 1024 MiB DDR2
[ 2.025391] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, AS00, max UDMA/100
[ 2.025398] ata2.00: applying bridge limits
[ 2.038752] ata2.00: configured for UDMA/100
[ 2.072051] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e4524229d3, max_idle_ns: 440795202126 ns
[ 2.073219] r8169 0000:03:00.0 eth1: renamed from eth0
[ 2.128174] [TTM] Zone kernel: Available graphics memory: 2023018 kiB
[ 2.128178] [TTM] Initializing pool allocator
[ 2.128185] [TTM] Initializing DMA pool allocator
[ 2.128202] nouveau 0000:02:00.0: DRM: VRAM: 1024 MiB
[ 2.128205] nouveau 0000:02:00.0: DRM: GART: 1048576 MiB
[ 2.128210] nouveau 0000:02:00.0: DRM: TMDS table version 2.0
[ 2.128213] nouveau 0000:02:00.0: DRM: DCB version 4.0
[ 2.128216] nouveau 0000:02:00.0: DRM: DCB outp 00: 01800323 00010034
[ 2.128219] nouveau 0000:02:00.0: DRM: DCB outp 01: 02811300 00000028
[ 2.128222] nouveau 0000:02:00.0: DRM: DCB outp 02: 04822312 00020010
[ 2.128225] nouveau 0000:02:00.0: DRM: DCB conn 00: 00000040
[ 2.128227] nouveau 0000:02:00.0: DRM: DCB conn 01: 00000100
[ 2.128229] nouveau 0000:02:00.0: DRM: DCB conn 02: 00001261
[ 2.128232] nouveau 0000:02:00.0: DRM: DCB conn 07: 00000413
[ 2.133652] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.133655] [drm] Driver supports precise vblank timestamp query.
[ 2.164933] nouveau 0000:02:00.0: DRM: MM: using CRYPT for buffer copies
[ 2.211080] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.211979] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
[ 2.211982] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.213937] ata1.00: configured for UDMA/100
[ 2.215151] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 C70P PQ: 0 ANSI: 5
[ 2.215404] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.215469] sd 0:0:0:0: [sda] Write Protect is off
[ 2.215472] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.215473] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.215500] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.221952] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A AS00 PQ: 0 ANSI: 5
[ 2.250243] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.250248] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.250747] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.250843] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.639569] sda: sda1 sda2 < sda5 >
[ 2.640070] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.647062] psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
[ 2.684536] psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[ 2.721516] psmouse serio4: elantech: Elan sample query result 1a, 00, 00
[ 2.857016] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input13
[ 3.105407] random: nonblocking pool is initialized
[ 3.410922] nouveau 0000:02:00.0: DRM: allocated 1600x900 fb: 0x70000, bo ffff8800348e7800
[ 3.411107] fbcon: nouveaufb (fb0) is primary device
[ 3.411211] Console: switching to colour frame buffer device 200x56
[ 3.411254] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[ 3.415164] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 0
[ 9.045431] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 10.638727] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 10.638881] systemd[1]: Detected architecture x86-64.
[ 10.649171] systemd[1]: Set hostname to <nicolas-A7Sv>.
[ 13.569247] systemd[1]: Listening on LVM2 poll daemon socket.
[ 13.569366] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 13.569506] systemd[1]: Created slice System Slice.
[ 13.569568] systemd[1]: Listening on Journal Socket (/dev/log).
[ 13.569605] systemd[1]: Listening on Syslog Socket.
[ 13.569656] systemd[1]: Listening on udev Control Socket.
[ 13.569710] systemd[1]: Listening on Journal Socket.
[ 13.569829] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 13.570000] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 13.570064] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 13.570112] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 13.570133] systemd[1]: Reached target Remote File Systems (Pre).
[ 13.570152] systemd[1]: Reached target Remote File Systems.
[ 13.574288] systemd[1]: Starting Set console keymap...
[ 13.574325] systemd[1]: Reached target User and Group Name Lookups.
[ 13.843250] systemd[1]: Starting Load Kernel Modules...
[ 13.844111] systemd[1]: Mounting POSIX Message Queue File System...
[ 13.844366] systemd[1]: Listening on Journal Audit Socket.
[ 13.845293] systemd[1]: Starting Journal Service...
[ 13.846215] systemd[1]: Starting Uncomplicated firewall...
[ 13.846334] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 13.847267] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 13.848387] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 13.849486] systemd[1]: Started Braille Device Support.
[ 13.978046] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 13.982111] systemd[1]: Mounting Debug File System...
[ 13.982298] systemd[1]: Created slice User and Session Slice.
[ 13.982328] systemd[1]: Reached target Slices.
[ 13.983144] systemd[1]: Started Read required files in advance.
[ 13.983314] systemd[1]: Reached target Encrypted Volumes.
[ 13.984270] systemd[1]: Mounting Huge Pages File System...
[ 13.984391] systemd[1]: Listening on udev Kernel Socket.
[ 14.146555] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 14.151241] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 14.511144] systemd[1]: Started Uncomplicated firewall.
[ 14.761248] systemd[1]: Mounted Huge Pages File System.
[ 14.761307] systemd[1]: Mounted Debug File System.
[ 14.761336] systemd[1]: Mounted POSIX Message Queue File System.
[ 15.180587] lp: driver loaded but no devices found
[ 15.214225] systemd[1]: Started LVM2 metadata daemon.
[ 15.234538] systemd[1]: Started Journal Service.
[ 15.288143] ppdev: user-space parallel port driver
[ 20.740459] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 21.042479] systemd-journald[892]: Received request to flush runtime journal from PID 1
[ 21.894194] i2c i2c-10: nForce2 SMBus adapter at 0x4d00
[ 21.894202] ACPI Warning: SystemIO range 0x0000000000004E00-0x0000000000004E3F conflicts with OpRegion 0x0000000000004E00-0x0000000000004E3F (\_SB_.PCI0.SM00) (20150930/utaddress-254)
[ 21.894209] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 22.053035] asus_laptop: Asus Laptop Support version 0.42
[ 22.053167] asus_laptop: BSTS called, 0xff5d returned
[ 22.053183] asus_laptop: K70IO model detected
[ 22.053580] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input14
[ 22.264585] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 23.262701] usblp 1-4:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1751
[ 23.262734] usbcore: registered new interface driver usblp
[ 23.673263] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[ 23.673278] snd_hda_intel 0000:00:08.0: Disabling MSI
[ 23.830833] media: Linux media interface: v0.10
[ 23.933539] Linux video capture interface: v2.00
[ 24.160084] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 24.160090] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 24.160093] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 24.160095] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 24.160097] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 24.160101] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 24.160104] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 24.402577] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 17
[ 24.450165] ath: phy0: Enable LNA combining
[ 24.451612] ath: EEPROM regdomain: 0x60
[ 24.451614] ath: EEPROM indicates we should expect a direct regpair map
[ 24.451617] ath: Country alpha2 being used: 00
[ 24.451618] ath: Regpair used: 0x60
[ 24.608760] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input15
[ 24.608898] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input16
[ 24.625912] uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M WebCam (064e:a116)
[ 24.642389] input: USB2.0 UVC 1.3M WebCam as /devices/pci0000:00/0000:00:04.1/usb1/1-5/1-5:1.0/input/input17
[ 24.642490] usbcore: registered new interface driver uvcvideo
[ 24.642493] USB Video Class driver (1.1.1)
[ 24.724335] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 24.724873] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90000940000, irq=17
[ 24.732213] ath9k 0000:04:00.0 wlan1: renamed from wlan0
[ 25.752237] cfg80211: World regulatory domain updated:
[ 25.752242] cfg80211: DFS Master region: unset
[ 25.752244] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 25.752247] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 25.752250] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 25.752252] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 25.752255] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 25.752258] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 25.752261] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 25.752263] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 25.752265] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 27.695835] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 27.927914] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 31.365329] Adding 4194300k swap on /dev/mapper/ubuntu--studio--vg-swap_1. Priority:-1 extents:1 across:4194300k FS
[ 32.907514] audit: type=1400 audit(1472053767.023:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=2309 comm="apparmor_parser"
[ 32.907526] audit: type=1400 audit(1472053767.023:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2309 comm="apparmor_parser"
[ 32.907534] audit: type=1400 audit(1472053767.023:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=2309 comm="apparmor_parser"
[ 32.907541] audit: type=1400 audit(1472053767.023:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2309 comm="apparmor_parser"
[ 33.032577] audit: type=1400 audit(1472053767.148:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=2308 comm="apparmor_parser"
[ 33.032593] audit: type=1400 audit(1472053767.148:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=2308 comm="apparmor_parser"
[ 33.096553] audit: type=1400 audit(1472053767.212:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=2312 comm="apparmor_parser"
[ 33.218614] audit: type=1400 audit(1472053767.334:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=2313 comm="apparmor_parser"
[ 33.354672] audit: type=1400 audit(1472053767.470:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2314 comm="apparmor_parser"
[ 33.354685] audit: type=1400 audit(1472053767.470:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=2314 comm="apparmor_parser"
[ 34.577877] cgroup: new mount options do not match the existing superblock, will be ignored
[ 48.305727] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 48.319265] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 48.325541] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 48.329336] r8169 0000:03:00.0 eth1: link down
[ 48.329380] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 53.343316] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 54.437383] wlan1: authenticate with 14:0c:76:f8:6d:28
[ 54.478961] wlan1: send auth to 14:0c:76:f8:6d:28 (try 1/3)
[ 54.480785] wlan1: authenticated
[ 54.482053] wlan1: associate with 14:0c:76:f8:6d:28 (try 1/3)
[ 54.485295] wlan1: RX AssocResp from 14:0c:76:f8:6d:28 (capab=0x411 status=0 aid=2)
[ 54.485388] wlan1: associated
[ 54.485453] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 59.422045] usblp0: removed
[ 59.428204] usblp 1-4:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1751
[ 108.116786] show_signal_msg: 27 callbacks suppressed
[ 108.116794] variety[4743]: segfault at b ip 00007f0ec2b6220e sp 00007ffcd04e13e8 error 4 in libc-2.23.so[7f0ec29f3000+1c0000]systemd-analyze blamedonne
27.053s udev-configure-printer@-devices-pci0000:00-0000:00:04.1-usb1-1\
26.598s winbind.service
26.490s nmbd.service
25.950s samba-ad-dc.service
13.457s ModemManager.service
12.315s timidity.service
10.640s dev-mapper-ubuntu\x2d\x2dstudio\x2d\x2dvg\x2droot.device
10.458s accounts-daemon.service
9.817s NetworkManager-wait-online.service
9.807s grub-common.service
8.587s irqbalance.service
8.518s preload.service
8.172s apport.service
8.053s networking.service
7.920s ondemand.service
7.640s console-kit-log-system-start.service
7.612s gpu-manager.service
7.594s rtirq.service
7.589s thermald.service
7.568s avahi-daemon.service
7.400s speech-dispatcher.service
7.383s systemd-logind.service
7.184s alsa-restore.service
7.169s lm-sensors.service
7.168s systemd-user-sessions.service
7.061s pppd-dns.service
6.570s unbound.service
5.602s apparmor.service
5.442s lightdm.service
3.727s systemd-udevd.service
3.187s NetworkManager.service
2.861s lvm2-monitor.service
2.619s systemd-tmpfiles-setup-dev.service
2.546s colord.service
2.491s keyboard-setup.service
2.338s rsyslog.service
2.310s console-setup.service
2.279s systemd-fsck@dev-disk-by\x2duuid-4cbb4df2\x2df650\x2d4d2a\x2db5
1.898s polkitd.service
1.823s systemd-modules-load.service
1.592s systemd-tmpfiles-setup.service
1.389s systemd-journald.service
1.304s binfmt-support.service
1.300s wpa_supplicant.service
1.139s apt-daily.service
1.106s systemd-backlight@backlight:acpi_video0.service
917ms dev-mqueue.mount
896ms console-kit-daemon.service
793ms upower.service
779ms sys-kernel-debug.mount
776ms dev-hugepages.mount
688ms plymouth-start.service
674ms systemd-rfkill.service
664ms ufw.service
624ms systemd-sysctl.service
569ms systemd-update-utmp.service
546ms smbd.service
486ms dev-mapper-ubuntu\x2d\x2dstudio\x2d\x2dvg\x2dswap_1.swap
413ms udisks2.service
394ms dns-clean.service
381ms boot.mount
342ms systemd-journal-flush.service
330ms systemd-udev-trigger.service
298ms kmod-static-nodes.service
254ms systemd-timesyncd.service
253ms user@1000.service
241ms systemd-random-seed.service
238ms setvtrgb.service
236ms systemd-hostnamed.service
235ms systemd-remount-fs.service
174ms plymouth-read-write.service
101ms proc-sys-fs-binfmt_misc.mount
100ms snapd.socket
99ms hddtemp.service
67ms rc-local.service
50ms resolvconf.service
48ms rtkit-daemon.service
39ms systemd-tmpfiles-clean.service
8ms ureadahead-stop.service
6ms systemd-update-utmp-runlevel.service
5ms sys-fs-fuse-connections.mount
4ms plymouth-quit-wait.servicedu coup ça remplace bootchart ?
merci d'avance
Dernière modification par calixtus06 (Le 24/08/2016, à 18:10)
Hors ligne
#4 Le 26/08/2016, à 22:44
- Bougron
Re : [ABANDONNE] long démarrage d'ubuntu
Bonjour
Peux-tu donner le contenu du fichier /etc/fstab
pg /etc/fstabainsi que le résultat de la commande
sudo blkidcar j'ai trouvé une piste dans cette discussion https://forum.ubuntu-fr.org/viewtopic.p … #p21571369
Dernière modification par Bougron (Le 01/09/2016, à 11:42)
Hors ligne
#5 Le 30/08/2016, à 21:48
- calixtus06
Re : [ABANDONNE] long démarrage d'ubuntu
bonsoir, ça donne ça
nicolas@nicolas-A7Sv:~$ sudo -s
[sudo] Mot de passe de nicolas :
root@nicolas-A7Sv:~# pg /etc/ftsab
pg: /etc/ftsab: Aucun fichier ou dossier de ce type
root@nicolas-A7Sv:~# pg /etc/ftsab
pg: /etc/ftsab: Aucun fichier ou dossier de ce type
root@nicolas-A7Sv:~# pg /etc/ftsab
pg: /etc/ftsab: Aucun fichier ou dossier de ce type
root@nicolas-A7Sv:~# sudo blkid
/dev/sda1: UUID="4cbb4df2-f650-4d2a-b520-98f51df05490" TYPE="ext2" PARTUUID="000b51ca-01"
/dev/sda5: UUID="FeEOI6-cFBf-UnHo-veny-8PFk-NbFz-uM3jjk" TYPE="LVM2_member" PARTUUID="000b51ca-05"
/dev/mapper/ubuntu--studio--vg-root: UUID="21cd082e-9c0a-4141-86c7-c6014444a8c4" TYPE="ext4"
/dev/mapper/ubuntu--studio--vg-swap_1: UUID="983e020b-5208-4f88-89e4-584b8cee3abf" TYPE="swap"
root@nicolas-A7Sv:~# merci pour ta patience !
Hors ligne
#6 Le 30/08/2016, à 23:18
- patked
Re : [ABANDONNE] long démarrage d'ubuntu
Hello
J'ai eu ce pb en passage de 14 à 16.04, un temps de démarrage très long.. UID erroné. (l'était il avant ?)
J'ai revérifié les UID avec GPART par rapport à mon /etc/fstab. J'ai corrigé le mauvais.
Temps de boot très très court après.
A+
Hors ligne
#7 Le 31/08/2016, à 11:32
- calixtus06
Re : [ABANDONNE] long démarrage d'ubuntu
bonjour, j'ai rien compris. Je suis archi débutant en informatique.
Qu'est ce qu'un(e) UID ? Que signifie:
"revérifié les uid avec GPART ( GPARTED ? )par rapport à mon /etc/fstab ( dossier, fichier ??) "
" j'ai corrigé le mauvais" . Comment savoir qui est le mauvais ?
Merci à toi pour ta patience !
Nicolas
Hors ligne
#8 Le 31/08/2016, à 18:20
- Compte anonymisé
Re : [ABANDONNE] long démarrage d'ubuntu
calixtus06 a écrit :
bonjour, j'ai rien compris. Je suis archi débutant en informatique. Qu'est ce qu'un(e) UID ?
1 - Connais-tu le proverbe du Chinois qui a faim, et à qui, plutôt que de lui donner du poisson, on donne une canne à pêche ? Je n'en suis pas sûr.
En cliquant sur l'image ci-dessous, tu vois quoi ?
Pour résumer, l'UUID pour "Universal Unique IDentifier", dit clairement ce qu'il veut dire, une sorte de long code qui permet d'identifier une partition de manière unique et sans ambiguïté (sauf si une mise à jour a modifié son identifiant bien sûr / objet du sujet peut-être.....).
Mais l'utilisation d'UUID (pas très explicite pour les cas simples) n'est pas obligatoire pour désigner une partition.
2 - "pg: /etc/ftsab: Aucun fichier ou dossier de ce type"
Essaie ça plutôt:
cat /etc/fstabou encore
grep -v "#" /etc/fstabDernière modification par Compte anonymisé (Le 31/08/2016, à 18:24)
#9 Le 31/08/2016, à 23:49
- calixtus06
Re : [ABANDONNE] long démarrage d'ubuntu
ok ok je suis allé un peu vite en besogne ..
nicolas@nicolas-A7Sv:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/mapper/ubuntu--studio--vg-root / ext4 errors=remount-ro 0 1
# /boot was on /dev/sda1 during installation
UUID=4cbb4df2-f650-4d2a-b520-98f51df05490 /boot ext2 defaults 0 2
/dev/mapper/ubuntu--studio--vg-swap_1 none swap sw 0 0
nicolas@nicolas-A7Sv:~$ grep -v "#" /etc/fstab
/dev/mapper/ubuntu--studio--vg-root / ext4 errors=remount-ro 0 1
UUID=4cbb4df2-f650-4d2a-b520-98f51df05490 /boot ext2 defaults 0 2
/dev/mapper/ubuntu--studio--vg-swap_1 none swap sw 0 0
nicolas@nicolas-A7Sv:~$ voili voilou
cat signifie montrer l'interieur d'un dossier ou d'un fichier, c'est ça ?
grep (chercher un texte, c'est ça ?) mais après peux tu m'expliquer le reste de la commande , merci
Hors ligne
#10 Le 01/09/2016, à 00:23
- patked
Re : [ABANDONNE] long démarrage d'ubuntu
très bien
Garde ton ecran terminal ouvert. Mais tu aussi l'ouvrir avec ton explorateur de fichier aussi . lance GPARTED.
Compare cote à cote le numéro (UID) de chaque /dev/xxxx. Si un ne correspond pas, c'est celui de gparted qu'il faut mettre. Si un /dev/xxx de /etc/fstab n'existe pas dans GPARTED, supprime alors la ligne ou met un # devant pour qu'elle soit ignorée, dasn fstab.
Je suis d'ailleurs à peu près sur que c'est un de tes swap qui met le bazar.
attention, pour modifier le fstab, il faut l'ouvrir avec un sudo (ex : sudo gedit /ect/fstab.
Hors ligne
#11 Le 01/09/2016, à 11:59
- Bougron
Re : [ABANDONNE] long démarrage d'ubuntu
Bonjour
La cause du démarrage long est visible ICI
[ 59.428204] usblp 1-4:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1751
[ 108.116786] show_signal_msg: 27 callbacks suppressed
[ 108.116794] variety[4743]: segfault at b ip 00007f0ec2b6220e sp 00007ffcd04e13e8 error 4 in libc-2.23.so[7f0ec29f3000+1c0000]Ce n'est pas un problème d'UUID dans le FSTAB (car souvent la durée est de 90 secondes)
Il y a une librairie de fichue ( libc-2.23.so)
Pour le moment, je ne sais pas d'où provient ce source http://unix.stackexchange.com/questions … o-segfault
Hors ligne
#12 Le 01/09/2016, à 16:34
- calixtus06
Re : [ABANDONNE] long démarrage d'ubuntu
re bonjour à vous deux ...
Wouah, ça devient complexe. Je suis au boulot je m'en occupe ce soir.
@ PATKED : J'ouvre GPARTED et compare le nom des partitions, du matériel ? entre quoi et quoi ? Je n'ai pas saisi cette phrase.
Ensuite aller dans /etc/fstab pour y voir les uid des partitions/ matériel ?
Merci de me confirmer avant que je me noie .
@BOUGRON: faut il supprimer cette librairie ou la "télécharger" à nouveau ?
Merci à vous
Nico
Hors ligne
#13 Le 01/09/2016, à 20:15
- Compte anonymisé
Re : [ABANDONNE] long démarrage d'ubuntu
@calixtus06
Vu ton niveau de maîtrises du sujet, je ne conseille pas d’utiliser gparted pour traiter ce cas: tu risques de détruire une partition ... par erreur, cer serait dommage. Risque inutile.
Avec l'output de blkid et fstab, tu as ce qu'il faut pour identifier tes partitions: inutile de compliquer.
Rien d'anormal à priori => laisse tomber gparted.
#14 Le 01/09/2016, à 21:20
- calixtus06
Re : [ABANDONNE] long démarrage d'ubuntu
@ psylip : c'est quoi l'ouput ? et qui plus est l'output de blkid et de fstab ???
Hors ligne
#15 Le 01/09/2016, à 21:32
- Compte anonymisé
Re : [ABANDONNE] long démarrage d'ubuntu
Alors excuse .... output ..... ou "sortie" ou "résultat".
Tu ne parles vraiment pas un seul petit mot d'anglais ?? (un peu surpris / excuse).
#16 Le 01/09/2016, à 22:00
- calixtus06
Re : [ABANDONNE] long démarrage d'ubuntu
j'essaie de comprendre et de vous suivre
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/mapper/ubuntu--studio--vg-root / ext4 errors=remount-ro 0 1
# /boot was on /dev/sda1 during installation
UUID=4cbb4df2-f650-4d2a-b520-98f51df05490 /boot ext2 defaults 0 2
/dev/mapper/ubuntu--studio--vg-swap_1 none swap sw 0 0
Hors ligne
#17 Le 01/09/2016, à 22:18
- calixtus06
Re : [ABANDONNE] long démarrage d'ubuntu
j'ai essayé de repérer où était la bibliothèque fichue:
nicolas@nicolas-A7Sv:~$ apt-file search libc-2.23.so
libc6: /lib/x86_64-linux-gnu/libc-2.23.so
libc6-arm64-cross: /usr/aarch64-linux-gnu/lib/libc-2.23.so
libc6-armel-cross: /usr/arm-linux-gnueabi/lib/libc-2.23.so
libc6-armhf-cross: /usr/arm-linux-gnueabihf/lib/libc-2.23.so
libc6-dbg: /usr/lib/debug/lib/x86_64-linux-gnu/libc-2.23.so
libc6-dbg-arm64-cross: /usr/aarch64-linux-gnu/lib/debug/lib/aarch64-linux-gnu/libc-2.23.so
libc6-dbg-armel-cross: /usr/arm-linux-gnueabi/lib/debug/lib/arm-linux-gnueabi/libc-2.23.so
libc6-dbg-armel-cross: /usr/arm-linux-gnueabi/lib/debug/lib/arm-linux-gnueabihf/libc-2.23.so
libc6-dbg-armhf-cross: /usr/arm-linux-gnueabihf/lib/debug/lib/arm-linux-gnueabi/libc-2.23.so
libc6-dbg-armhf-cross: /usr/arm-linux-gnueabihf/lib/debug/lib/arm-linux-gnueabihf/libc-2.23.so
libc6-dbg-hppa-cross: /usr/hppa-linux-gnu/lib/debug/lib/hppa-linux-gnu/libc-2.23.so
libc6-dbg-m68k-cross: /usr/m68k-linux-gnu/lib/debug/lib/m68k-linux-gnu/libc-2.23.so
libc6-dbg-mips-cross: /usr/mips-linux-gnu/lib/debug/lib/mips-linux-gnu/libc-2.23.so
libc6-dbg-mips64-cross: /usr/mips64-linux-gnuabi64/lib/debug/lib/mips64-linux-gnuabi64/libc-2.23.so
libc6-dbg-mips64el-cross: /usr/mips64el-linux-gnuabi64/lib/debug/lib/mips64el-linux-gnuabi64/libc-2.23.so
libc6-dbg-mipsel-cross: /usr/mipsel-linux-gnu/lib/debug/lib/mipsel-linux-gnu/libc-2.23.so
libc6-dbg-powerpc-cross: /usr/powerpc-linux-gnu/lib/debug/lib/powerpc-linux-gnu/libc-2.23.so
libc6-dbg-powerpcspe-cross: /usr/powerpc-linux-gnuspe/lib/debug/lib/powerpc-linux-gnuspe/libc-2.23.so
libc6-dbg-ppc64-cross: /usr/powerpc64-linux-gnu/lib/debug/lib/powerpc64-linux-gnu/libc-2.23.so
libc6-dbg-ppc64el-cross: /usr/powerpc64le-linux-gnu/lib/debug/lib/powerpc64le-linux-gnu/libc-2.23.so
libc6-dbg-s390x-cross: /usr/s390x-linux-gnu/lib/debug/lib/s390x-linux-gnu/libc-2.23.so
libc6-dbg-sh4-cross: /usr/sh4-linux-gnu/lib/debug/lib/sh4-linux-gnu/libc-2.23.so
libc6-dbg-sparc64-cross: /usr/sparc64-linux-gnu/lib/debug/lib/sparc64-linux-gnu/libc-2.23.so
libc6-dbg-sparc64-cross: /usr/sparc64-linux-gnu/lib/debug/lib32/libc-2.23.so
libc6-hppa-cross: /usr/hppa-linux-gnu/lib/libc-2.23.so
libc6-i386: /lib32/libc-2.23.so
libc6-m68k-cross: /usr/m68k-linux-gnu/lib/libc-2.23.so
libc6-mips-cross: /usr/mips-linux-gnu/lib/libc-2.23.so
libc6-mips32-mips64-cross: /usr/mips64-linux-gnuabi64/libo32/libc-2.23.so
libc6-mips32-mips64el-cross: /usr/mips64el-linux-gnuabi64/libo32/libc-2.23.so
libc6-mips64-cross: /usr/mips64-linux-gnuabi64/lib/libc-2.23.so
libc6-mips64-mips-cross: /usr/mips-linux-gnu/lib64/libc-2.23.so
libc6-mips64-mipsel-cross: /usr/mipsel-linux-gnu/lib64/libc-2.23.so
libc6-mips64el-cross: /usr/mips64el-linux-gnuabi64/lib/libc-2.23.so
libc6-mipsel-cross: /usr/mipsel-linux-gnu/lib/libc-2.23.so
libc6-mipsn32-mips-cross: /usr/mips-linux-gnu/lib32/libc-2.23.so
libc6-mipsn32-mips64-cross: /usr/mips64-linux-gnuabi64/lib32/libc-2.23.so
libc6-mipsn32-mips64el-cross: /usr/mips64el-linux-gnuabi64/lib32/libc-2.23.so
libc6-mipsn32-mipsel-cross: /usr/mipsel-linux-gnu/lib32/libc-2.23.so
libc6-powerpc-cross: /usr/powerpc-linux-gnu/lib/libc-2.23.so
libc6-powerpc-ppc64-cross: /usr/powerpc64-linux-gnu/lib32/libc-2.23.so
libc6-powerpcspe-cross: /usr/powerpc-linux-gnuspe/lib/libc-2.23.so
libc6-ppc64-cross: /usr/powerpc64-linux-gnu/lib/libc-2.23.so
libc6-ppc64-powerpc-cross: /usr/powerpc-linux-gnu/lib64/libc-2.23.so
libc6-ppc64el-cross: /usr/powerpc64le-linux-gnu/lib/libc-2.23.so
libc6-s390-s390x-cross: /usr/s390x-linux-gnu/lib32/libc-2.23.so
libc6-s390x-cross: /usr/s390x-linux-gnu/lib/libc-2.23.so
libc6-sh4-cross: /usr/sh4-linux-gnu/lib/libc-2.23.so
libc6-sparc-sparc64-cross: /usr/sparc64-linux-gnu/lib32/libc-2.23.so
libc6-sparc64-cross: /usr/sparc64-linux-gnu/lib/libc-2.23.so
libc6-x32: /libx32/libc-2.23.so
libc6.1-alpha-cross: /usr/alpha-linux-gnu/lib/libc-2.23.so
libc6.1-dbg-alpha-cross: /usr/alpha-linux-gnu/lib/debug/lib/alpha-linux-gnu/ev67/libc-2.23.so
libc6.1-dbg-alpha-cross: /usr/alpha-linux-gnu/lib/debug/lib/alpha-linux-gnu/libc-2.23.so
nicolas@nicolas-A7Sv:~$ Si quelqu'un peut m'expliquer ..
Hors ligne
#18 Le 01/09/2016, à 22:22
- calixtus06
Re : [ABANDONNE] long démarrage d'ubuntu
nicolas@nicolas-A7Sv:~$ blkid
/dev/sda1: UUID="4cbb4df2-f650-4d2a-b520-98f51df05490" TYPE="ext2" PARTUUID="000b51ca-01"
/dev/sda5: UUID="FeEOI6-cFBf-UnHo-veny-8PFk-NbFz-uM3jjk" TYPE="LVM2_member" PARTUUID="000b51ca-05"
/dev/mapper/ubuntu--studio--vg-root: UUID="21cd082e-9c0a-4141-86c7-c6014444a8c4" TYPE="ext4"
/dev/mapper/ubuntu--studio--vg-swap_1: UUID="983e020b-5208-4f88-89e4-584b8cee3abf" TYPE="swap"
nicolas@nicolas-A7Sv:~$ fstab
fstab : commande introuvable
nicolas@nicolas-A7Sv:~$Hors ligne
#19 Le 01/09/2016, à 22:28
- calixtus06
Re : [ABANDONNE] long démarrage d'ubuntu
j'ai ça aussi systématiquement et j'ai le sentiment que ça a à voir :
non ?
Hors ligne
#20 Le 02/09/2016, à 02:58
- Bougron
Re : [ABANDONNE] long démarrage d'ubuntu
Bonsoir
Ce problème est important;, cela peut aller jusqu'à empêcher un démarrage.
Quelques idées
a) Pour l'occupation place disque
df -h
df -ib) installer kclean et le lancer pour supprimer les noyaux inutiles https://forum.ubuntu-fr.org/viewtopic.php?id=242358
c) installer ncdu pour trouver les répertoires gourmands
Hors ligne
Pages : 1