#1 Le 26/08/2016, à 15:17
- LeDahal
[Résolu] Ubuntu 16.04 et SSD: temps de démarrage multiplié par 6...
Bonjour,
J'ai migré sous Ubuntu 16.04 il y a peu. Précédemment sous Ubuntu 14.04, j'avais installé le système d'exploitation sur un disque SSD, et l'ordinateur démarrait en 10 secondes... le SSD jouait parfaitement son rôle.
Malheureusement, depuis la migration vers 16.04, le démarrage est devenu beaucoup plus lent (l'écran d'attente lors du démarrage reste fixe durant au moins 90 secondes avant d'arriver sur le bureau), ce qui digne de Windows avec disque dur magnétique . Je ne connais pas la raison de cette lenteur, et je ne sais pas par où commencer pour chercher. Je précise que j'utilise cinnamon, que ce soit dans l'ancienne ou la nouvelle version.
Quelqu'un parmi vous aurait-il une piste pour retrouver un démarrage plus rapide?
Merci!
--
LeDahal
Dernière modification par LeDahal (Le 29/08/2016, à 09:06)
Hors ligne
#2 Le 26/08/2016, à 18:00
- Bougron
Re : [Résolu] Ubuntu 16.04 et SSD: temps de démarrage multiplié par 6...
Bonjour
Pour analyser un démarrage qui se fait correctement, donnes le retour de
dmesg > TRACE.txt
gedit TRACE.txt
et
systemd-analyze blame
N'oublies pas de mettre en forme en utilisant le 11eme icône <> de cette grille de saisie après avoir sélectionné ce que tu viens de copier
Hors ligne
#3 Le 26/08/2016, à 18:09
- LeDahal
Re : [Résolu] Ubuntu 16.04 et SSD: temps de démarrage multiplié par 6...
Bonjour, voici le retour de ces deux instructions (attention, c'est long...)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-34-generic (buildd@lgw01-20) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2.1) ) #53-Ubuntu SMP Wed Jul 27 16:06:39 UTC 2016 (Ubuntu 4.4.0-34.53-generic 4.4.15)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-34-generic root=UUID=ef3e99bf-1c9b-4839-b177-e3d4b27d4565 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] tseg: 00cfe00000
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000983ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000098400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfc90fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfcf0000-0x00000000cfcf2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfcf3000-0x00000000cfcfffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfd00000-0x00000000cfdfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA74GM-S2H/GA-MA74GM-S2H, BIOS FD 06/14/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFD00000 mask FFFFFFF00000 uncachable
[ 0.000000] 4 base 0000CFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 5 base 000100000000 mask FFFFE0000000 write-back
[ 0.000000] 6 base 000120000000 mask FFFFF0000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3325MB, range: 1MB, type UC
[ 0.000000] reg 4, base: 3326MB, range: 2MB, type UC
[ 0.000000] reg 5, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 6, base: 4608MB, range: 256MB, type WB
[ 0.000000] total RAM covered: 3325M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3325MB, range: 1MB, type UC
[ 0.000000] reg 4, base: 3326MB, range: 2MB, type UC
[ 0.000000] e820: update [mem 0xcfd00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcfc91 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f5680-0x000f568f] mapped at [ffff8800000f5680]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000092000] 92000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x02200000, 0x02200fff] PGTABLE
[ 0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33afa000-0x35d74fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F70B0 000014 (v00 GBT )
[ 0.000000] ACPI: RSDT 0x00000000CFCF3000 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 0x00000000CFCF3040 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 0x00000000CFCF30C0 003E7E (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0x00000000CFCF0000 000040
[ 0.000000] ACPI: SSDT 0x00000000CFCF7000 00088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 0x00000000CFCF78C0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 0x00000000CFCF7900 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: TAMG 0x00000000CFCF7940 00033A (v01 GBT GBT B0 5455312E BG?? 48240101)
[ 0.000000] ACPI: APIC 0x00000000CFCF6F40 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x12fff9000-0x12fffdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000012fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000097fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cfc90fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000012fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff]
[ 0.000000] On node 0 totalpages: 1047592
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3991 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13235 pages used for memmap
[ 0.000000] DMA32 zone: 846993 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00098000-0x00098fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00099000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfc91000-0xcfceffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfcf0000-0xcfcf2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfcf3000-0xcfcfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfd00000-0xcfdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xcfe00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88012fc00000 s98008 r8192 d28968 u262144
[ 0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031200
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-34-generic root=UUID=ef3e99bf-1c9b-4839-b177-e3d4b27d4565 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x3c000000-0x3dffffff] (32MB)
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[ 0.000000] Memory: 3938064K/4190368K available (8394K kernel code, 1282K rwdata, 3944K rodata, 1480K init, 1292K bss, 252304K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16640 nr_irqs:488 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3020.910 MHz processor
[ 0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 6041.82 BogoMIPS (lpj=12083640)
[ 0.000028] pid_max: default: 32768 minimum: 301
[ 0.000034] ACPI: Core revision 20150930
[ 0.001819] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.001842] Security Framework initialized
[ 0.001844] Yama: becoming mindful.
[ 0.001862] AppArmor: AppArmor initialized
[ 0.002091] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003398] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004018] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.004022] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.004257] Initializing cgroup subsys io
[ 0.004261] Initializing cgroup subsys memory
[ 0.004268] Initializing cgroup subsys devices
[ 0.004271] Initializing cgroup subsys freezer
[ 0.004274] Initializing cgroup subsys net_cls
[ 0.004277] Initializing cgroup subsys perf_event
[ 0.004279] Initializing cgroup subsys net_prio
[ 0.004282] Initializing cgroup subsys hugetlb
[ 0.004285] Initializing cgroup subsys pids
[ 0.004304] CPU: Physical Processor ID: 0
[ 0.004305] CPU: Processor Core ID: 0
[ 0.004307] mce: CPU supports 6 MCE banks
[ 0.004312] LVT offset 0 assigned for vector 0xf9
[ 0.004318] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.004319] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[ 0.004545] Freeing SMP alternatives memory: 28K (ffffffff820b4000 - ffffffff820bb000)
[ 0.022760] ftrace: allocating 31994 entries in 125 pages
[ 0.318815] smpboot: Max logical packages: 2
[ 0.318819] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.319359] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.466298] smpboot: CPU0: AMD Phenom(tm) II X4 945 Processor (family: 0x10, model: 0x4, stepping: 0x2)
[ 0.466314] Performance Events: AMD PMU driver.
[ 0.466318] ... version: 0
[ 0.466319] ... bit width: 48
[ 0.466319] ... generic registers: 4
[ 0.466320] ... value mask: 0000ffffffffffff
[ 0.466321] ... max period: 00007fffffffffff
[ 0.466322] ... fixed-purpose events: 0
[ 0.466323] ... event mask: 000000000000000f
[ 0.466977] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.467046] x86: Booting SMP configuration:
[ 0.467047] .... node #0, CPUs: #1 #2 #3
[ 0.474933] x86: Booted up 1 node, 4 CPUs
[ 0.474935] smpboot: Total of 4 processors activated (24167.28 BogoMIPS)
[ 0.479583] devtmpfs: initialized
[ 0.483219] evm: security.selinux
[ 0.483220] evm: security.SMACK64
[ 0.483221] evm: security.SMACK64EXEC
[ 0.483222] evm: security.SMACK64TRANSMUTE
[ 0.483223] evm: security.SMACK64MMAP
[ 0.483224] evm: security.ima
[ 0.483224] evm: security.capability
[ 0.483340] PM: Registering ACPI NVS region [mem 0xcfcf0000-0xcfcf2fff] (12288 bytes)
[ 0.483420] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.483509] pinctrl core: initialized pinctrl subsystem
[ 0.483611] RTC time: 17:30:29, date: 08/26/16
[ 0.483717] NET: Registered protocol family 16
[ 0.494318] cpuidle: using governor ladder
[ 0.506314] cpuidle: using governor menu
[ 0.506322] PCCT header not found.
[ 0.506328] node 0 link 0: io port [c000, ffff]
[ 0.506330] TOM: 00000000d0000000 aka 3328M
[ 0.506332] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[ 0.506334] node 0 link 0: mmio [a0000, bffff]
[ 0.506336] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.506338] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.506339] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
[ 0.506342] TOM2: 0000000130000000 aka 4864M
[ 0.506343] bus: [bus 00-03] on node 0 link 0
[ 0.506344] bus: 00 [io 0x0000-0xffff]
[ 0.506346] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.506347] bus: 00 [mem 0xd0000000-0xdfffffff]
[ 0.506348] bus: 00 [mem 0xe0400000-0xffffffff]
[ 0.506349] bus: 00 [mem 0xe0100000-0xe03fffff]
[ 0.506350] bus: 00 [mem 0x130000000-0xfcffffffff]
[ 0.506436] ACPI: bus type PCI registered
[ 0.506438] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.506509] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.506511] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.506526] PCI: Using configuration type 1 for base access
[ 0.518715] ACPI: Added _OSI(Module Device)
[ 0.518717] ACPI: Added _OSI(Processor Device)
[ 0.518718] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.518719] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.524113] ACPI: Interpreter enabled
[ 0.524124] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.524128] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.524140] ACPI: (supports S0 S3 S4 S5)
[ 0.524142] ACPI: Using IOAPIC for interrupt routing
[ 0.524204] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.527288] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.527294] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.527299] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.527477] PCI host bridge to bus 0000:00
[ 0.527479] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.527481] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.527483] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.527485] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.527487] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff window]
[ 0.527489] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.527495] pci 0000:00:00.0: [1002:7911] type 00 class 0x060000
[ 0.527571] pci 0000:00:02.0: [1002:7913] type 01 class 0x060400
[ 0.527599] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.527633] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.527667] pci 0000:00:06.0: [1002:7916] type 01 class 0x060400
[ 0.527694] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.527725] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 0.527772] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.527798] pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07]
[ 0.527807] pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03]
[ 0.527816] pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07]
[ 0.527826] pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03]
[ 0.527835] pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f]
[ 0.527844] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.527931] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.527946] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
[ 0.528029] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.528061] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.528076] pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[ 0.528159] pci 0000:00:12.1: System wakeup disabled by ACPI
[ 0.528193] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.528219] pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff]
[ 0.528289] pci 0000:00:12.2: supports D1 D2
[ 0.528290] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.528325] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.528363] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.528378] pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
[ 0.528461] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.528494] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.528509] pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[ 0.528592] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.528627] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.528652] pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff]
[ 0.528722] pci 0000:00:13.2: supports D1 D2
[ 0.528723] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.528757] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.528797] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.528935] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.528958] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.528967] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.528976] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.528985] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.528994] pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f]
[ 0.529014] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.529016] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.529017] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.529019] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.529091] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.529118] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.529177] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.529209] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.529242] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.529364] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.529428] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.529460] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.529475] pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff]
[ 0.529561] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.529594] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.529650] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.529704] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.529758] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.529813] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.529907] pci 0000:01:00.0: [10de:0640] type 00 class 0x030000
[ 0.529927] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.529936] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.529946] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.529953] pci 0000:01:00.0: reg 0x24: [io 0xef00-0xef7f]
[ 0.529959] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.534325] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.534331] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.534333] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.534336] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.534390] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.534420] pci 0000:02:00.0: reg 0x10: [io 0xde00-0xdeff]
[ 0.534440] pci 0000:02:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.534452] pci 0000:02:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.534461] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.534508] pci 0000:02:00.0: supports D1 D2
[ 0.534510] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.542323] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.542328] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
[ 0.542330] pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.542333] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.542420] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.542424] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.542427] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.542431] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
[ 0.542433] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.542435] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.542436] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.542438] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.542440] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xfebfffff window] (subtractive decode)
[ 0.542633] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.542675] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.542712] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.542747] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.542782] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.542817] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.542852] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.542886] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.543330] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.543332] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.543333] vgaarb: loaded
[ 0.543334] vgaarb: bridge control possible 0000:01:00.0
[ 0.543569] SCSI subsystem initialized
[ 0.543650] libata version 3.00 loaded.
[ 0.543670] ACPI: bus type USB registered
[ 0.543686] usbcore: registered new interface driver usbfs
[ 0.543694] usbcore: registered new interface driver hub
[ 0.543712] usbcore: registered new device driver usb
[ 0.543843] PCI: Using ACPI for IRQ routing
[ 0.552560] PCI: pci_cache_line_size set to 64 bytes
[ 0.552607] e820: reserve RAM buffer [mem 0x00098400-0x0009ffff]
[ 0.552608] e820: reserve RAM buffer [mem 0xcfc91000-0xcfffffff]
[ 0.552709] NetLabel: Initializing
[ 0.552710] NetLabel: domain hash size = 128
[ 0.552711] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.552721] NetLabel: unlabeled traffic allowed by default
[ 0.552818] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.552821] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.554883] clocksource: Switched to clocksource hpet
[ 0.560930] AppArmor: AppArmor Filesystem Enabled
[ 0.560986] pnp: PnP ACPI init
[ 0.561080] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.561083] system 00:00: [io 0x0220-0x0225] has been reserved
[ 0.561085] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.561088] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.561291] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.561295] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.561315] system 00:01: [io 0x4100-0x411f] has been reserved
[ 0.561317] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.561319] system 00:01: [io 0x040b] has been reserved
[ 0.561321] system 00:01: [io 0x04d6] has been reserved
[ 0.561322] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.561324] system 00:01: [io 0x0c14] has been reserved
[ 0.561325] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.561327] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.561329] system 00:01: [io 0x0c6f] has been reserved
[ 0.561330] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.561332] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.561334] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.561336] system 00:01: [io 0x4000-0x40fe] could not be reserved
[ 0.561337] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.561339] system 00:01: [io 0x0b00-0x0b0f] has been reserved
[ 0.561341] system 00:01: [io 0x0b10-0x0b1f] has been reserved
[ 0.561342] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.561344] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.561347] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.561462] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.561651] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.561653] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.561786] system 00:04: [mem 0x000d4400-0x000d7fff] has been reserved
[ 0.561788] system 00:04: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.561790] system 00:04: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.561791] system 00:04: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.561793] system 00:04: [mem 0xcfcf0000-0xcfcfffff] could not be reserved
[ 0.561795] system 00:04: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.561797] system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.561799] system 00:04: [mem 0x00100000-0xcfceffff] could not be reserved
[ 0.561800] system 00:04: [mem 0xcfd00000-0xcfdfffff] has been reserved
[ 0.561802] system 00:04: [mem 0xcfe00000-0xcfefffff] could not be reserved
[ 0.561804] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.561806] system 00:04: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.561807] system 00:04: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.561810] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.561821] pnp: PnP ACPI: found 5 devices
[ 0.568294] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.568318] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref]
[ 0.568320] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.568323] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.568325] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.568328] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.568331] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref]
[ 0.568333] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.568335] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
[ 0.568337] pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.568339] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.568343] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.568345] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.568350] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.568354] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
[ 0.568361] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.568363] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.568364] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.568366] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.568368] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff window]
[ 0.568369] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.568371] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.568373] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.568374] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.568376] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.568378] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.568379] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.568381] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.568382] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref]
[ 0.568384] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.568386] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.568387] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.568389] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.568391] pci_bus 0000:03: resource 8 [mem 0xcff00000-0xfebfffff window]
[ 0.568423] NET: Registered protocol family 2
[ 0.568601] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.568697] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.568847] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.568895] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.568921] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.568988] NET: Registered protocol family 1
[ 0.931041] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.931048] PCI: CLS 4 bytes, default 64
[ 0.931113] Trying to unpack rootfs image as initramfs...
[ 1.436878] Freeing initrd memory: 35308K (ffff880033afa000 - ffff880035d75000)
[ 1.437088] PCI-DMA: Disabling AGP.
[ 1.437183] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.437185] PCI-DMA: using GART IOMMU.
[ 1.437187] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.440318] LVT offset 1 assigned for vector 0x400
[ 1.440327] IBS: LVT offset 1 assigned
[ 1.440367] perf: AMD IBS detected (0x0000001f)
[ 1.440456] Scanning for low memory corruption every 60 seconds
[ 1.440802] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.440842] audit: initializing netlink subsys (disabled)
[ 1.440863] audit: type=2000 audit(1472232630.040:1): initialized
[ 1.441151] Initialise system trusted keyring
[ 1.441324] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 1.441325] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.442649] zbud: loaded
[ 1.442913] VFS: Disk quotas dquot_6.6.0
[ 1.442945] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.443177] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.443478] fuse init (API version 7.23)
[ 1.443599] Key type big_key registered
[ 1.443619] Allocating IMA MOK and blacklist keyrings.
[ 1.444058] Key type asymmetric registered
[ 1.444061] Asymmetric key parser 'x509' registered
[ 1.444091] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.444133] io scheduler noop registered
[ 1.444136] io scheduler deadline registered (default)
[ 1.444161] io scheduler cfq registered
[ 1.444354] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.444360] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.444386] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 1.444387] vesafb: scrolling: redraw
[ 1.444389] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.444402] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90000800000, using 5120k, total 5120k
[ 1.444515] Console: switching to colour frame buffer device 160x64
[ 1.444535] fb0: VESA VGA frame buffer device
[ 1.444606] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.444610] ACPI: Power Button [PWRB]
[ 1.444646] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.444649] ACPI: Power Button [PWRF]
[ 1.444860] GHES: HEST is not enabled!
[ 1.444940] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.446341] Linux agpgart interface v0.103
[ 1.448848] brd: module loaded
[ 1.449951] loop: module loaded
[ 1.450165] libphy: Fixed MDIO Bus: probed
[ 1.450168] tun: Universal TUN/TAP device driver, 1.6
[ 1.450169] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.450199] PPP generic driver version 2.4.2
[ 1.450248] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.450251] ehci-pci: EHCI PCI platform driver
[ 1.450376] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.450381] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.450385] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.450395] ehci-pci 0000:00:12.2: debug port 1
[ 1.450440] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 1.458940] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.459007] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.459009] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.459011] usb usb1: Product: EHCI Host Controller
[ 1.459012] usb usb1: Manufacturer: Linux 4.4.0-34-generic ehci_hcd
[ 1.459014] usb usb1: SerialNumber: 0000:00:12.2
[ 1.459149] hub 1-0:1.0: USB hub found
[ 1.459154] hub 1-0:1.0: 6 ports detected
[ 1.459389] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.459394] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.459398] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.459408] ehci-pci 0000:00:13.2: debug port 1
[ 1.459456] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
[ 1.470936] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.471005] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.471007] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.471009] usb usb2: Product: EHCI Host Controller
[ 1.471010] usb usb2: Manufacturer: Linux 4.4.0-34-generic ehci_hcd
[ 1.471011] usb usb2: SerialNumber: 0000:00:13.2
[ 1.471141] hub 2-0:1.0: USB hub found
[ 1.471146] hub 2-0:1.0: 6 ports detected
[ 1.471279] ehci-platform: EHCI generic platform driver
[ 1.471292] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.471295] ohci-pci: OHCI PCI platform driver
[ 1.471410] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.471415] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.471446] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 1.530945] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.530948] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.530950] usb usb3: Product: OHCI PCI host controller
[ 1.530951] usb usb3: Manufacturer: Linux 4.4.0-34-generic ohci_hcd
[ 1.530953] usb usb3: SerialNumber: 0000:00:12.0
[ 1.531096] hub 3-0:1.0: USB hub found
[ 1.531103] hub 3-0:1.0: 3 ports detected
[ 1.531290] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 1.531296] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.531323] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 1.590942] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.590946] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.590947] usb usb4: Product: OHCI PCI host controller
[ 1.590949] usb usb4: Manufacturer: Linux 4.4.0-34-generic ohci_hcd
[ 1.590950] usb usb4: SerialNumber: 0000:00:12.1
[ 1.591093] hub 4-0:1.0: USB hub found
[ 1.591100] hub 4-0:1.0: 3 ports detected
[ 1.591297] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.591303] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.591338] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 1.650940] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.650944] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.650945] usb usb5: Product: OHCI PCI host controller
[ 1.650947] usb usb5: Manufacturer: Linux 4.4.0-34-generic ohci_hcd
[ 1.650948] usb usb5: SerialNumber: 0000:00:13.0
[ 1.651091] hub 5-0:1.0: USB hub found
[ 1.651099] hub 5-0:1.0: 3 ports detected
[ 1.651286] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 1.651291] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.651313] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 1.710940] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.710944] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.710945] usb usb6: Product: OHCI PCI host controller
[ 1.710947] usb usb6: Manufacturer: Linux 4.4.0-34-generic ohci_hcd
[ 1.710948] usb usb6: SerialNumber: 0000:00:13.1
[ 1.711093] hub 6-0:1.0: USB hub found
[ 1.711100] hub 6-0:1.0: 3 ports detected
[ 1.711287] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.711293] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.711316] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
[ 1.770949] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.770953] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.770955] usb usb7: Product: OHCI PCI host controller
[ 1.770956] usb usb7: Manufacturer: Linux 4.4.0-34-generic ohci_hcd
[ 1.770957] usb usb7: SerialNumber: 0000:00:14.5
[ 1.771099] hub 7-0:1.0: USB hub found
[ 1.771107] hub 7-0:1.0: 2 ports detected
[ 1.771197] ohci-platform: OHCI generic platform driver
[ 1.771207] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.771264] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.805621] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 1.805622] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 2.030910] usb 3-3: new full-speed USB device number 2 using ohci-pci
[ 2.030913] usb 1-5: new high-speed USB device number 3 using ehci-pci
[ 2.046910] usb 6-3: new low-speed USB device number 2 using ohci-pci
[ 2.055008] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.055132] mousedev: PS/2 mouse device common for all mice
[ 2.055282] rtc_cmos 00:02: RTC can wake from S4
[ 2.055408] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.055447] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.055456] i2c /dev entries driver
[ 2.055513] device-mapper: uevent: version 1.0.3
[ 2.055575] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 2.055593] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.055922] NET: Registered protocol family 10
[ 2.056128] NET: Registered protocol family 17
[ 2.056141] Key type dns_resolver registered
[ 2.056373] microcode: CPU0: patch_level=0x01000086
[ 2.056382] microcode: CPU1: patch_level=0x01000086
[ 2.056388] microcode: CPU2: patch_level=0x01000086
[ 2.056394] microcode: CPU3: patch_level=0x01000086
[ 2.056429] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.056581] registered taskstats version 1
[ 2.056598] Loading compiled-in X.509 certificates
[ 2.057545] Loaded X.509 cert 'Build time autogenerated kernel key: c40ffa48d8617ce4553ee3ab59017c95e74f2501'
[ 2.057563] zswap: loaded using pool lzo/zbud
[ 2.059862] Key type trusted registered
[ 2.063833] Key type encrypted registered
[ 2.063844] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.063848] ima: No TPM chip found, activating TPM-bypass!
[ 2.063870] evm: HMAC attrs: 0x1
[ 2.064099] Magic number: 12:248:543
[ 2.064191] rtc_cmos 00:02: setting system clock to 2016-08-26 17:30:31 UTC (1472232631)
[ 2.064298] acpi-cpufreq: overriding BIOS provided _PSD data
[ 2.064407] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.064408] EDD information not available.
[ 2.064459] PM: Hibernation image not present or could not be loaded.
[ 2.065882] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[ 2.065884] Write protecting the kernel read-only data: 14336k
[ 2.066672] Freeing unused kernel memory: 1832K (ffff880001836000 - ffff880001a00000)
[ 2.067092] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
[ 2.077611] random: systemd-udevd urandom read with 3 bits of entropy available
[ 2.116391] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 2.134988] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.135000] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.135338] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xffffc90000648000, 6c:f0:49:10:8c:b2, XID 083000c0 IRQ 26
[ 2.135340] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.138949] scsi host0: pata_atiixp
[ 2.139966] [drm] Initialized drm 1.1.0 20060810
[ 2.146945] scsi host1: pata_atiixp
[ 2.147001] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 2.147003] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 2.147048] ahci 0000:00:11.0: version 3.0
[ 2.147255] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.147258] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.154702] wmi: Mapper loaded
[ 2.154893] scsi host2: ahci
[ 2.162891] scsi host3: ahci
[ 2.163929] usb 1-5: New USB device found, idVendor=1058, idProduct=0702
[ 2.163933] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.163935] usb 1-5: Product: External HDD
[ 2.163937] usb 1-5: Manufacturer: Western Digital
[ 2.163938] usb 1-5: SerialNumber: 575848313038373639353935
[ 2.170901] scsi host4: ahci
[ 2.171017] scsi host5: ahci
[ 2.171059] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 2.171062] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 2.171065] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 2.171068] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 2.177659] checking generic (f9000000 500000) vs hw (d0000000 10000000)
[ 2.177663] checking generic (f9000000 500000) vs hw (f8000000 2000000)
[ 2.177664] fb: switching to nouveaufb from VESA VGA
[ 2.177696] Console: switching to colour dummy device 80x25
[ 2.177812] nouveau 0000:01:00.0: NVIDIA G96 (096000c1)
[ 2.203839] usb 3-3: New USB device found, idVendor=046d, idProduct=c52f
[ 2.203843] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.203844] usb 3-3: Product: USB Receiver
[ 2.203846] usb 3-3: Manufacturer: Logitech
[ 2.284584] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.293823] usbcore: registered new interface driver usbhid
[ 2.293826] usbhid: USB HID core driver
[ 2.297964] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:046D:C52F.0001/input/input3
[ 2.298066] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-3/input0
[ 2.298087] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 2.298675] scsi host6: usb-storage 1-5:1.0
[ 2.298760] usbcore: registered new interface driver usb-storage
[ 2.300227] usbcore: registered new interface driver uas
[ 2.300703] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:046D:C52F.0002/input/input4
[ 2.305003] nouveau 0000:01:00.0: bios: version 62.94.57.00.00
[ 2.325828] nouveau 0000:01:00.0: bios: M0203T not found
[ 2.325831] nouveau 0000:01:00.0: bios: M0203E not matched!
[ 2.325833] nouveau 0000:01:00.0: fb: 1024 MiB DDR2
[ 2.330353] usb 6-3: New USB device found, idVendor=046d, idProduct=c31b
[ 2.330356] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.330358] usb 6-3: Product: Logitech USB Keyboard
[ 2.330360] usb 6-3: Manufacturer: Logitech
[ 2.349573] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/0003:046D:C31B.0003/input/input5
[ 2.355021] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-3/input1
[ 2.375611] [TTM] Zone kernel: Available graphics memory: 2021408 kiB
[ 2.375613] [TTM] Initializing pool allocator
[ 2.375618] [TTM] Initializing DMA pool allocator
[ 2.375628] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[ 2.375630] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 2.375633] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 2.375635] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 2.375637] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000028
[ 2.375639] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030
[ 2.375641] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011310 00000028
[ 2.375642] nouveau 0000:01:00.0: DRM: DCB outp 03: 02022332 00020010
[ 2.375644] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[ 2.375645] nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
[ 2.375647] nouveau 0000:01:00.0: DRM: DCB conn 02: 00002261
[ 2.378501] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.378502] [drm] Driver supports precise vblank timestamp query.
[ 2.410990] hid-generic 0003:046D:C31B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:13.1-3/input0
[ 2.423222] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.1/0003:046D:C31B.0004/input/input6
[ 2.442914] tsc: Refined TSC clocksource calibration: 3020.887 MHz
[ 2.442917] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b8b58a1f61, max_idle_ns: 440795231049 ns
[ 2.490923] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.522998] hid-generic 0003:046D:C31B.0004: input,hidraw3: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:00:13.1-3/input1
[ 2.640267] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies
[ 2.658922] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.658963] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.660354] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB02, max UDMA/100
[ 2.662372] ata3.00: configured for UDMA/100
[ 2.668371] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB02 PQ: 0 ANSI: 5
[ 2.670903] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.678253] ata5.00: ATA-8: KINGSTON SV300S37A480G, 608ABBF0, max UDMA/133
[ 2.678256] ata5.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.685468] sr 2:0:0:0: [sr0] scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.685471] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.685601] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.685792] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 2.688870] ata5.00: configured for UDMA/133
[ 2.691048] ata4.00: ATA-8: WDC WD3200AAJS-56M0A0, 01.03E01, max UDMA/133
[ 2.691050] ata4.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.691874] ata4.00: configured for UDMA/133
[ 2.692020] scsi 3:0:0:0: Direct-Access ATA WDC WD3200AAJS-5 3E01 PQ: 0 ANSI: 5
[ 2.692198] sd 3:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.692270] sd 3:0:0:0: [sda] Write Protect is off
[ 2.692272] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.692305] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.692321] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 2.692546] scsi 4:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[ 2.692684] sd 4:0:0:0: [sdb] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[ 2.692735] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.692737] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.692754] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.692863] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 2.693327] sdb: sdb1 sdb2
[ 2.693564] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 2.703843] sda: sda1
[ 2.704096] sd 3:0:0:0: [sda] Attached SCSI disk
[ 2.704479] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x70000, bo ffff8800cf977000
[ 2.705188] fbcon: nouveaufb (fb0) is primary device
[ 2.705281] Console: switching to colour frame buffer device 240x67
[ 2.705318] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 2.722927] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 3.295554] scsi 6:0:0:0: Direct-Access WD 1600BEV External 1.04 PQ: 0 ANSI: 4
[ 3.295817] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 3.296427] sd 6:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 3.297420] sd 6:0:0:0: [sdc] Write Protect is off
[ 3.297425] sd 6:0:0:0: [sdc] Mode Sense: 21 00 00 00
[ 3.298424] sd 6:0:0:0: [sdc] No Caching mode page found
[ 3.298429] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 3.301659] sdc: sdc1
[ 3.305032] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 3.442976] clocksource: Switched to clocksource tsc
[ 5.154886] floppy0: no floppy controllers found
[ 5.233206] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.297930] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[ 5.318036] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 5.318160] systemd[1]: Detected architecture x86-64.
[ 5.318446] systemd[1]: Set hostname to <pascal-bureau>.
[ 5.399464] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.399543] systemd[1]: Listening on udev Control Socket.
[ 5.399629] systemd[1]: Created slice System Slice.
[ 5.399662] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.399694] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.399714] systemd[1]: Listening on udev Kernel Socket.
[ 5.399815] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.399827] systemd[1]: Reached target User and Group Name Lookups.
[ 5.399834] systemd[1]: Reached target Encrypted Volumes.
[ 5.399873] systemd[1]: Listening on Journal Socket.
[ 5.414998] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.415433] systemd[1]: Mounting Debug File System...
[ 5.415896] systemd[1]: Started Braille Device Support.
[ 5.416496] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.417200] systemd[1]: Started Read required files in advance.
[ 5.420381] systemd[1]: Starting Load Kernel Modules...
[ 5.420473] systemd[1]: Listening on Journal Audit Socket.
[ 5.420530] systemd[1]: Listening on Syslog Socket.
[ 5.421060] systemd[1]: Mounting Huge Pages File System...
[ 5.421078] systemd[1]: Reached target Remote File Systems (Pre).
[ 5.421103] systemd[1]: Reached target Remote File Systems.
[ 5.421699] systemd[1]: Starting Set console keymap...
[ 5.422259] systemd[1]: Starting Uncomplicated firewall...
[ 5.425797] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.426238] systemd[1]: Starting Journal Service...
[ 5.426358] systemd[1]: Created slice User and Session Slice.
[ 5.426379] systemd[1]: Reached target Slices.
[ 5.427592] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 5.428172] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.428193] systemd[1]: Mounted Debug File System.
[ 5.428591] systemd[1]: Mounted Huge Pages File System.
[ 5.429956] systemd[1]: Started Uncomplicated firewall.
[ 5.440865] lp: driver loaded but no devices found
[ 5.446052] ppdev: user-space parallel port driver
[ 5.450769] systemd[1]: Started Load Kernel Modules.
[ 5.451709] systemd[1]: Mounting FUSE Control File System...
[ 5.453426] systemd[1]: Starting Apply Kernel Variables...
[ 5.453918] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.455269] systemd[1]: Mounted FUSE Control File System.
[ 5.471680] systemd[1]: Started Apply Kernel Variables.
[ 5.473664] systemd[1]: Started Journal Service.
[ 5.655019] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[ 5.724880] systemd-journald[831]: Received request to flush runtime journal from PID 1
[ 5.853486] audit: type=1400 audit(1472225435.285:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1304 comm="apparmor_parser"
[ 5.853495] audit: type=1400 audit(1472225435.285:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=1304 comm="apparmor_parser"
[ 5.858731] audit: type=1400 audit(1472225435.289:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1330 comm="apparmor_parser"
[ 5.860213] audit: type=1400 audit(1472225435.293:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1306 comm="apparmor_parser"
[ 5.860220] audit: type=1400 audit(1472225435.293:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1306 comm="apparmor_parser"
[ 5.860225] audit: type=1400 audit(1472225435.293:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1306 comm="apparmor_parser"
[ 5.860241] audit: type=1400 audit(1472225435.293:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1306 comm="apparmor_parser"
[ 5.864266] audit: type=1400 audit(1472225435.297:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=1312 comm="apparmor_parser"
[ 5.864275] audit: type=1400 audit(1472225435.297:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=1312 comm="apparmor_parser"
[ 5.904478] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.011930] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.012103] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 6.059929] random: nonblocking pool is initialized
[ 6.069663] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[ 6.077860] EDAC MC: Ver: 3.0.0
[ 6.080015] MCE: In-kernel MCE decoding enabled.
[ 6.082046] AMD64 EDAC driver v3.4.0
[ 6.082088] EDAC amd64: DRAM ECC disabled.
[ 6.082098] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 6.103407] Adding 4068348k swap on /dev/sdb1. Priority:-1 extents:1 across:4068348k SSFS
[ 6.149195] kvm: Nested Virtualization enabled
[ 6.149200] kvm: Nested Paging enabled
[ 6.159977] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 6.159991] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.159994] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.159995] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.159997] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 6.159998] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.160001] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 6.160002] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 6.160004] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 6.160005] snd_hda_codec_realtek hdaudioC0D0: CD=0x1c
[ 6.160007] snd_hda_codec_realtek hdaudioC0D0: dig-in=0x1f
[ 6.175671] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 6.175753] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 6.175833] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 6.175975] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 8.930869] floppy0: no floppy controllers found
[ 95.598501] cgroup: new mount options do not match the existing superblock, will be ignored
[ 95.795710] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 95.851525] r8169 0000:02:00.0 eth0: link down
[ 95.851528] r8169 0000:02:00.0 eth0: link down
[ 95.851631] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 97.118271] sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[ 97.118276] sd 6:0:0:0: [sdc] tag#0 Sense Key : Hardware Error [current] [descriptor]
[ 97.118278] sd 6:0:0:0: [sdc] tag#0 Add. Sense: No additional sense information
[ 97.118281] sd 6:0:0:0: [sdc] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 97.509187] r8169 0000:02:00.0 eth0: link up
[ 97.509201] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 97.569194] sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[ 97.569200] sd 6:0:0:0: [sdc] tag#0 Sense Key : Hardware Error [current] [descriptor]
[ 97.569202] sd 6:0:0:0: [sdc] tag#0 Add. Sense: No additional sense information
[ 97.569206] sd 6:0:0:0: [sdc] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
[ 97.575957] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 696.010197] sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[ 696.010212] sd 6:0:0:0: [sdc] tag#0 Sense Key : Hardware Error [current] [descriptor]
[ 696.010220] sd 6:0:0:0: [sdc] tag#0 Add. Sense: No additional sense information
[ 696.010230] sd 6:0:0:0: [sdc] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 696.467484] sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[ 696.467499] sd 6:0:0:0: [sdc] tag#0 Sense Key : Hardware Error [current] [descriptor]
[ 696.467507] sd 6:0:0:0: [sdc] tag#0 Add. Sense: No additional sense information
[ 696.467517] sd 6:0:0:0: [sdc] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
[ 1294.595091] sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[ 1294.595110] sd 6:0:0:0: [sdc] tag#0 Sense Key : Hardware Error [current] [descriptor]
[ 1294.595119] sd 6:0:0:0: [sdc] tag#0 Add. Sense: No additional sense information
[ 1294.595131] sd 6:0:0:0: [sdc] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 1295.043986] sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[ 1295.043998] sd 6:0:0:0: [sdc] tag#0 Sense Key : Hardware Error [current] [descriptor]
[ 1295.044002] sd 6:0:0:0: [sdc] tag#0 Add. Sense: No additional sense information
[ 1295.044007] sd 6:0:0:0: [sdc] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
[ 1893.130525] sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[ 1893.130533] sd 6:0:0:0: [sdc] tag#0 Sense Key : Hardware Error [current] [descriptor]
[ 1893.130536] sd 6:0:0:0: [sdc] tag#0 Add. Sense: No additional sense information
[ 1893.130540] sd 6:0:0:0: [sdc] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 1893.576221] sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[ 1893.576237] sd 6:0:0:0: [sdc] tag#0 Sense Key : Hardware Error [current] [descriptor]
[ 1893.576246] sd 6:0:0:0: [sdc] tag#0 Add. Sense: No additional sense information
[ 1893.576256] sd 6:0:0:0: [sdc] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
et de la deuxième:
647ms dev-sdb2.device
273ms lm-sensors.service
221ms apparmor.service
188ms ModemManager.service
182ms accounts-daemon.service
176ms console-setup.service
142ms lightdm.service
134ms systemd-logind.service
130ms upower.service
127ms avahi-daemon.service
120ms systemd-udevd.service
117ms NetworkManager.service
116ms apport.service
99ms grub-common.service
98ms snapd.refresh.service
98ms systemd-udev-trigger.service
94ms plymouth-quit-wait.service
92ms gpu-manager.service
89ms keyboard-setup.service
87ms thermald.service
86ms irqbalance.service
79ms ondemand.service
71ms systemd-journal-flush.service
69ms speech-dispatcher.service
62ms networking.service
58ms udisks2.service
50ms dns-clean.service
47ms systemd-journald.service
47ms plymouth-start.service
43ms systemd-tmpfiles-setup-dev.service
33ms alsa-restore.service
33ms rsyslog.service
33ms iio-sensor-proxy.service
30ms systemd-modules-load.service
29ms colord.service
29ms systemd-tmpfiles-clean.service
28ms polkitd.service
25ms user@1000.service
25ms pppd-dns.service
25ms systemd-update-utmp.service
22ms systemd-tmpfiles-setup.service
20ms systemd-timesyncd.service
18ms console-kit-daemon.service
18ms systemd-sysctl.service
17ms systemd-user-sessions.service
12ms sys-kernel-debug.mount
12ms kmod-static-nodes.service
12ms plymouth-read-write.service
12ms systemd-hostnamed.service
11ms dev-mqueue.mount
10ms snapd.socket
10ms dev-disk-by\x2duuid-93c61fe5\x2dd13f\x2d46d1\x2db224\x2d6593614
10ms systemd-update-utmp-runlevel.service
8ms systemd-remount-fs.service
8ms systemd-random-seed.service
7ms ufw.service
7ms dev-hugepages.mount
7ms resolvconf.service
5ms setvtrgb.service
5ms rc-local.service
5ms rtkit-daemon.service
4ms ureadahead-stop.service
3ms sys-fs-fuse-connections.mount
2ms console-kit-log-system-start.service
J'espère que cela parlera plus qu'à moi!
Hors ligne
#4 Le 26/08/2016, à 21:33
- Bougron
Re : [Résolu] Ubuntu 16.04 et SSD: temps de démarrage multiplié par 6...
Il va falloir trouver ce qui se passe entre la 9e seconde et la 95e. Pour le moment je ne sais pas faire.
[ 8.930869] floppy0: no floppy controllers found
[ 95.598501] cgroup: new mount options do not match the existing superblock, will be ignored
Mais j'ai le souvenir que cela est une attente de 90 secondes sur quelque chose.... Il faut que je retrouve cette discussion
Ton contexte ressemble à cette discussion https://forum.ubuntu-fr.org/viewtopic.php?pid=21577398
AJOUT. J'ai vu la piste de cqfd93 et du délai de 90 secondes... Peux-tu donner le contenu du fichier /etc/fstab
pg /etc/fstab
et le résultat de cette commande.
sudo blkid
et donc trouvé cette discussion qui le confirme https://forum.ubuntu-fr.org/viewtopic.p … #p21571369
Dernière modification par Bougron (Le 26/08/2016, à 22:46)
Hors ligne
#5 Le 26/08/2016, à 21:45
- cqfd93
Re : [Résolu] Ubuntu 16.04 et SSD: temps de démarrage multiplié par 6...
Bonjour,
Quelques pistes (mais je ne pourrai pas aider à s'en inspirer pour régler le problème, le fstab c'est pas trop mon truc !) :
http://askubuntu.com/questions/612600/1 … -slow-boot
http://askubuntu.com/questions/714884/u … e-existing
(recherche google avec : "cgroup: new mount options do not match the existing superblock")
− cqfd93 −
Hors ligne
#6 Le 28/08/2016, à 21:15
- LeDahal
Re : [Résolu] Ubuntu 16.04 et SSD: temps de démarrage multiplié par 6...
Salut, merci à tous pour vos réponses provisoires, cela me paraît plus compliqué que je ne l'espérais!...
Voici les résultats retournés par les deux commandes que Bougron me suggère:
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb2 during installation
UUID=ef3e99bf-1c9b-4839-b177-e3d4b27d4565 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda2 during installation
UUID=c2b7f26a-16bf-4dde-bb00-4ca0f46d3e05 none swap sw 0 0
# swap was on /dev/sdb1 during installation
UUID=93c61fe5-d13f-46d1-b224-6593614177f7 none swap sw 0 0
et: (MODIF)
/dev/sda1: UUID="7cb73504-c0f5-4012-bdb8-6c730202b1ac" TYPE="ext4" PARTUUID="0003e94d-01"
/dev/sdb1: UUID="93c61fe5-d13f-46d1-b224-6593614177f7" TYPE="swap" PARTUUID="000ab73e-01"
/dev/sdb2: UUID="ef3e99bf-1c9b-4839-b177-e3d4b27d4565" TYPE="ext4" PARTUUID="000ab73e-02"
/dev/sdc1: LABEL="My Passport" UUID="54A5-509E" TYPE="vfat" PARTUUID="5b6ac646-01"
Merci beaucoup de ce que vous faites pour m'aider à régler ce problème sans réinstaller tout le système d'exploitation
Dernière modification par LeDahal (Le 29/08/2016, à 08:52)
Hors ligne
#7 Le 28/08/2016, à 23:19
- bonuscad
Re : [Résolu] Ubuntu 16.04 et SSD: temps de démarrage multiplié par 6...
Tu as oublié le retour de :
sudo blkid
Essentiel pour voir si les UUID correspondent bien à ceux déclaré dans le fstab, d'ailleurs ceci est bien spécifié dans le retour
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
Sans ces informations, difficile de voir si les UUID dans fstab sont correct.
Hors ligne
#8 Le 28/08/2016, à 23:25
- Coeur Noir
Re : [Résolu] Ubuntu 16.04 et SSD: temps de démarrage multiplié par 6...
Déjà il y a 2 partitons swap : une sur sda et l'autre sur sdb, c'est bizarre.
( c'est quoi la commande pg ? c'est comme cat ? )
Dernière modification par Coeur Noir (Le 28/08/2016, à 23:31)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#9 Le 29/08/2016, à 00:18
- Bougron
Re : [Résolu] Ubuntu 16.04 et SSD: temps de démarrage multiplié par 6...
Déjà il y a 2 partitions swap : une sur sda et l'autre sur sdb, c'est bizarre.
( c'est quoi la commande pg ? c'est comme cat ? )
Il y a toutes les chances de SDA2 ne soit plus présent car pas vu dans la trace de démarrage alors que sdb1 est présent
[ 6.103407] Adding 4068348k swap on /dev/sdb1. Priority:-1 extents:1 across:4068348k SSFS
Donc
sudo gedit /etc/fstab
et mise d 'un dièze en colonne 1 sur la ligne
#UUID=c2b7f26a-16bf-4dde-bb00-4ca0f46d3e05 none swap sw 0 0
et sauvegarde
pg est un cat qui tient compte de la taille de l'écran
u16041@u16041:~$ pg /boot/grub/grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
:
Dernière modification par Bougron (Le 29/08/2016, à 00:31)
Hors ligne
#10 Le 29/08/2016, à 08:55
- LeDahal
Re : [Résolu] Ubuntu 16.04 et SSD: temps de démarrage multiplié par 6...
Merci, désolé pour les deux codes identiques. J'ai modifié, vous avez maintenant plus haut les retours de:
pg /etc/fstab
et
sudo blkid
Hors ligne
#11 Le 29/08/2016, à 09:05
- LeDahal
Re : [Résolu] Ubuntu 16.04 et SSD: temps de démarrage multiplié par 6...
Il y a toutes les chances de SDA2 ne soit plus présent car pas vu dans la trace de démarrage alors que sdb1 est présent
[ 6.103407] Adding 4068348k swap on /dev/sdb1. Priority:-1 extents:1 across:4068348k SSFS
Donc
sudo gedit /etc/fstab
et mise d 'un dièze en colonne 1 sur la ligne
#UUID=c2b7f26a-16bf-4dde-bb00-4ca0f46d3e05 none swap sw 0 0
et sauvegarde
La solution que tu proposes a parfaitement focntionné, et l'ordinateur démarra maintenant en moins de 10 secondes.
Merci beaucoup!
Hors ligne
#12 Le 29/09/2016, à 21:14
- degolarson
Re : [Résolu] Ubuntu 16.04 et SSD: temps de démarrage multiplié par 6...
Bonjour
J'ai le même problème général de lenteur au démarrage (à ma montre > 1mn30) alors que des copains avec un SSD comme moi démarrent en 10s
Je poste les retours des commandes vues plus haut :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-92-generic (buildd@lgw01-59) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #139-Ubuntu SMP Tue Jun 28 20:42:32 UTC 2016 (Ubuntu 3.13.0-92.139-generic 3.13.11-ckt39)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000098bff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000098c00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e1000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdd7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bdd80000-0x00000000bdd8efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdd8f000-0x00000000bdddffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bdde0000-0x00000000bddfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: ASUSTeK Computer Inc. K70IJ /K70IJ , BIOS 203 08/03/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xbdd80 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BDE00000 mask FFFE00000 uncachable
[ 0.000000] 3 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3038MB, range: 2MB, type UC
[ 0.000000] reg 3, base: 3040MB, range: 32MB, type UC
[ 0.000000] total RAM covered: 3038M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3038MB, range: 2MB, type UC
[ 0.000000] reg 3, base: 3040MB, range: 32MB, type UC
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c0094000] 94000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[ 0.000000] [mem 0x37800000-0x379fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[ 0.000000] [mem 0x34000000-0x377fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x01ba4000, 0x01ba4fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35a9a000-0x36d44fff]
[ 0.000000] ACPI: RSDP 000f93d0 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT bdd80100 000084 (v01 _ASUS_ Notebook 20090803 MSFT 00000097)
[ 0.000000] ACPI: FACP bdd80290 0000F4 (v03 080309 FACP1439 20090803 MSFT 00000097)
[ 0.000000] ACPI: DSDT bdd80680 00CEB5 (v01 K70IJ K70IJ203 00000203 INTL 20051117)
[ 0.000000] ACPI: FACS bdd8f000 000040
[ 0.000000] ACPI: APIC bdd80390 00005C (v01 080309 APIC1439 20090803 MSFT 00000097)
[ 0.000000] ACPI: MCFG bdd80430 00003C (v01 080309 OEMMCFG 20090803 MSFT 00000097)
[ 0.000000] ACPI: SLIC bdd80470 000176 (v01 _ASUS_ Notebook 20090803 MSFT 00000097)
[ 0.000000] ACPI: ECDT bdd80620 000054 (v01 080309 OEMECDT 20090803 MSFT 00000097)
[ 0.000000] ACPI: DBGP bdd803f0 000034 (v01 080309 DBGP1439 20090803 MSFT 00000097)
[ 0.000000] ACPI: BOOT bdd805f0 000028 (v01 080309 BOOT1439 20090803 MSFT 00000097)
[ 0.000000] ACPI: OEMB bdd8f040 000071 (v01 080309 OEMB1439 20090803 MSFT 00000097)
[ 0.000000] ACPI: HPET bdd8d540 000038 (v01 080309 OEMHPET 20090803 MSFT 00000097)
[ 0.000000] ACPI: GSCI bdd8f0c0 002024 (v01 080309 GMCHSCI 20090803 MSFT 00000097)
[ 0.000000] ACPI: ATKG bdd912f0 008024 (v01 022008 OEMATKG 20080220 MSFT 00000097)
[ 0.000000] ACPI: SSDT bdd99e00 0004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2145MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] BRK [0x01ba5000, 0x01ba5fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0xbdd7ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00097fff]
[ 0.000000] node 0: [mem 0x00100000-0xbdd7ffff]
[ 0.000000] On node 0 totalpages: 777495
[ 0.000000] free_area_init_node: node 0, pgdat c19a98c0, node_mem_map f42da020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3991 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4292 pages used for memmap
[ 0.000000] HighMem zone: 549250 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x00098000-0x00098fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00099000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e1000-0x000fffff]
[ 0.000000] e820: [mem 0xc0000000-0xfed1ffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bd0000 s35520 r0 d21824 u57344
[ 0.000000] pcpu-alloc: s35520 r0 d21824 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 775711
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-92-generic root=/dev/mapper/xubuntu--vg-root ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 6220792 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:000bdd80)
[ 0.000000] Memory: 3047484K/3109980K available (6579K kernel code, 645K rwdata, 2776K rodata, 884K init, 924K bss, 62496K reserved, 2197000K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc19c7000 - 0xc1aa4000 ( 884 kB)
[ 0.000000] .data : 0xc166d1ca - 0xc19c6780 (3429 kB)
[ 0.000000] .text : 0xc1000000 - 0xc166d1ca (6580 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f7008000 soft=f700a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1995.211 MHz processor
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.42 BogoMIPS (lpj=7980844)
[ 0.004006] pid_max: default: 32768 minimum: 301
[ 0.004042] Security Framework initialized
[ 0.004063] AppArmor: AppArmor initialized
[ 0.004064] Yama: becoming mindful.
[ 0.004120] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004123] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004393] Initializing cgroup subsys memory
[ 0.004401] Initializing cgroup subsys devices
[ 0.004404] Initializing cgroup subsys freezer
[ 0.004406] Initializing cgroup subsys blkio
[ 0.004409] Initializing cgroup subsys perf_event
[ 0.004412] Initializing cgroup subsys hugetlb
[ 0.004445] CPU: Physical Processor ID: 0
[ 0.004447] CPU: Processor Core ID: 0
[ 0.004450] mce: CPU supports 6 MCE banks
[ 0.004458] CPU0: Thermal monitoring handled by SMI
[ 0.004463] process: using mwait in idle threads
[ 0.004474] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.004474] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.004474] tlb_flushall_shift: -1
[ 0.004855] Freeing SMP alternatives memory: 32K (c1aa4000 - c1aac000)
[ 0.006106] ACPI: Core revision 20131115
[ 0.016029] ACPI: All ACPI Tables successfully acquired
[ 0.020007] ftrace: allocating 27907 entries in 55 pages
[ 0.032109] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.032487] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.074650] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU T4200 @ 2.00GHz (fam: 06, model: 17, stepping: 0a)
[ 0.076000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.076000] ... version: 2
[ 0.076000] ... bit width: 40
[ 0.076000] ... generic registers: 2
[ 0.076000] ... value mask: 000000ffffffffff
[ 0.076000] ... max period: 000000007fffffff
[ 0.076000] ... fixed-purpose events: 3
[ 0.076000] ... event mask: 0000000700000003
[ 0.076000] CPU 1 irqstacks, hard=f70ec000 soft=f70ee000
[ 0.076000] x86: Booting SMP configuration:
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.076000] .... node #0, CPUs: #1
[ 0.087420] x86: Booted up 1 node, 2 CPUs
[ 0.087425] smpboot: Total of 2 processors activated (7980.84 BogoMIPS)
[ 0.087518] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.088164] devtmpfs: initialized
[ 0.088270] EVM: security.selinux
[ 0.088272] EVM: security.SMACK64
[ 0.088274] EVM: security.ima
[ 0.088275] EVM: security.capability
[ 0.088397] PM: Registering ACPI NVS region [mem 0xbdd8f000-0xbdddffff] (331776 bytes)
[ 0.089739] pinctrl core: initialized pinctrl subsystem
[ 0.089836] regulator-dummy: no parameters
[ 0.089878] RTC time: 16:46:24, date: 09/29/16
[ 0.089929] NET: Registered protocol family 16
[ 0.090133] EISA bus registered
[ 0.090135] cpuidle: using governor ladder
[ 0.090137] cpuidle: using governor menu
[ 0.090241] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.090244] ACPI: bus type PCI registered
[ 0.090247] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.090333] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.090336] PCI: not using MMCONFIG
[ 0.090475] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.090591] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 0.090593] PCI: Using configuration type 1 for base access
[ 0.092115] bio: create slab <bio-0> at 0
[ 0.092143] ACPI: Added _OSI(Module Device)
[ 0.092143] ACPI: Added _OSI(Processor Device)
[ 0.092143] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.092143] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.092143] ACPI : EC: EC description table is found, configuring boot EC
[ 0.102445] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.106618] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.116171] ACPI BIOS Warning (bug): Incorrect checksum in table [ATKG] - 0xCA, should be 0xE5 (20131115/tbprint-214)
[ 0.116444] ACPI: SSDT bdd993f0 000206 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.117047] ACPI: Dynamic OEM Table Load:
[ 0.117050] ACPI: SSDT (null) 000206 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.117220] ACPI: SSDT bdd99690 000765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.117803] ACPI: Dynamic OEM Table Load:
[ 0.117806] ACPI: SSDT (null) 000765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.118065] ACPI: SSDT bdd99320 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.118656] ACPI: Dynamic OEM Table Load:
[ 0.118659] ACPI: SSDT (null) 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.118753] ACPI: SSDT bdd99600 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.119335] ACPI: Dynamic OEM Table Load:
[ 0.119338] ACPI: SSDT (null) 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.119688] ACPI: Interpreter enabled
[ 0.119715] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.119720] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.119739] ACPI: (supports S0 S3 S4 S5)
[ 0.119741] ACPI: Using IOAPIC for interrupt routing
[ 0.119776] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.121543] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.121546] PCI: Using MMCONFIG for extended config space
[ 0.121569] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.121892] ACPI: No dock devices found.
[ 0.132959] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.132969] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.133391] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.133394] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.133806] PCI host bridge to bus 0000:00
[ 0.133810] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.133813] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.133816] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.133819] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.133821] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.133824] pci_bus 0000:00: root bus resource [mem 0xbde00000-0xffffffff]
[ 0.133836] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.133864] DMAR: Forcing write-buffer flush capability
[ 0.133866] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.133969] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.133986] pci 0000:00:02.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit]
[ 0.133996] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.134004] pci 0000:00:02.0: reg 0x20: [io 0xdc00-0xdc07]
[ 0.134121] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.134135] pci 0000:00:02.1: reg 0x10: [mem 0xfe800000-0xfe8fffff 64bit]
[ 0.134305] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.134374] pci 0000:00:1a.0: reg 0x20: [io 0xd880-0xd89f]
[ 0.134517] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.134568] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.134636] pci 0000:00:1a.1: reg 0x20: [io 0xd800-0xd81f]
[ 0.134777] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.134832] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.134900] pci 0000:00:1a.2: reg 0x20: [io 0xd480-0xd49f]
[ 0.135043] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.135102] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.135133] pci 0000:00:1a.7: reg 0x10: [mem 0xfe9fbc00-0xfe9fbfff]
[ 0.135265] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.135385] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.135443] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.135469] pci 0000:00:1b.0: reg 0x10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ 0.135585] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.135656] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.135705] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.135816] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.135889] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.135937] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.136064] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.136186] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.136306] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.136379] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.136430] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.136500] pci 0000:00:1d.0: reg 0x20: [io 0xd400-0xd41f]
[ 0.136644] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.136693] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.136761] pci 0000:00:1d.1: reg 0x20: [io 0xd080-0xd09f]
[ 0.136903] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.136952] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.137020] pci 0000:00:1d.2: reg 0x20: [io 0xd000-0xd01f]
[ 0.137159] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.137222] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.137253] pci 0000:00:1d.7: reg 0x10: [mem 0xfe9fb800-0xfe9fbbff]
[ 0.137385] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.137501] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.137548] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.137678] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.137729] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 0.137971] pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018f
[ 0.137997] pci 0000:00:1f.2: reg 0x10: [io 0xcc00-0xcc07]
[ 0.138010] pci 0000:00:1f.2: reg 0x14: [io 0xc880-0xc883]
[ 0.138024] pci 0000:00:1f.2: reg 0x18: [io 0xc800-0xc807]
[ 0.138037] pci 0000:00:1f.2: reg 0x1c: [io 0xc480-0xc483]
[ 0.138050] pci 0000:00:1f.2: reg 0x20: [io 0xc400-0xc40f]
[ 0.138063] pci 0000:00:1f.2: reg 0x24: [io 0xc080-0xc08f]
[ 0.138224] pci 0000:00:1f.5: [8086:292d] type 00 class 0x010185
[ 0.138251] pci 0000:00:1f.5: reg 0x10: [io 0xbc00-0xbc07]
[ 0.138264] pci 0000:00:1f.5: reg 0x14: [io 0xb880-0xb883]
[ 0.138278] pci 0000:00:1f.5: reg 0x18: [io 0xb800-0xb807]
[ 0.138290] pci 0000:00:1f.5: reg 0x1c: [io 0xb480-0xb483]
[ 0.138304] pci 0000:00:1f.5: reg 0x20: [io 0xb400-0xb40f]
[ 0.138317] pci 0000:00:1f.5: reg 0x24: [io 0xb080-0xb08f]
[ 0.138540] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.138674] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[ 0.138708] pci 0000:02:00.0: reg 0x10: [mem 0xfeaf0000-0xfeafffff 64bit]
[ 0.138861] pci 0000:02:00.0: supports D1
[ 0.138864] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.144021] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.144031] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.144153] pci 0000:03:00.0: [1969:1026] type 00 class 0x020000
[ 0.144188] pci 0000:03:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
[ 0.144205] pci 0000:03:00.0: reg 0x18: [io 0xec00-0xec7f]
[ 0.144346] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.144387] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.152019] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.152025] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.152031] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.152150] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.152166] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.152168] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.152171] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.152174] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.152177] pci 0000:00:1e.0: bridge window [mem 0xbde00000-0xffffffff] (subtractive decode)
[ 0.152215] pci_bus 0000:00: on NUMA node 0
[ 0.153098] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
[ 0.153174] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
[ 0.153245] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[ 0.153315] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
[ 0.153385] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
[ 0.153455] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
[ 0.153529] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
[ 0.153600] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
[ 0.153950] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.153958] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.154038] Found 1 acpi root devices
[ 0.154133] ACPI : EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 0.154251] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.154251] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.154251] vgaarb: loaded
[ 0.154251] vgaarb: bridge control possible 0000:00:02.0
[ 0.154251] SCSI subsystem initialized
[ 0.154251] libata version 3.00 loaded.
[ 0.154251] ACPI: bus type USB registered
[ 0.154251] usbcore: registered new interface driver usbfs
[ 0.154251] usbcore: registered new interface driver hub
[ 0.154251] usbcore: registered new device driver usb
[ 0.154251] PCI: Using ACPI for IRQ routing
[ 0.154251] PCI: pci_cache_line_size set to 64 bytes
[ 0.154251] e820: reserve RAM buffer [mem 0x00098c00-0x0009ffff]
[ 0.154251] e820: reserve RAM buffer [mem 0xbdd80000-0xbfffffff]
[ 0.154251] NetLabel: Initializing
[ 0.154251] NetLabel: domain hash size = 128
[ 0.154251] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.154251] NetLabel: unlabeled traffic allowed by default
[ 0.154251] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.154251] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.154251] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.157016] Switched to clocksource hpet
[ 0.165399] AppArmor: AppArmor Filesystem Enabled
[ 0.165441] pnp: PnP ACPI init
[ 0.165463] ACPI: bus type PNP registered
[ 0.165566] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.165572] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.165624] pnp 00:01: [dma 4]
[ 0.165650] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.165701] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.165768] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.165847] pnp 00:04: Plug and Play ACPI device, IDs ETD0001 PNP0f0e PNP0f0b PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.165882] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.165920] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.166149] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.166153] system 00:07: [io 0x0800-0x087f] could not be reserved
[ 0.166156] system 00:07: [io 0x0400-0x041f] has been reserved
[ 0.166163] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.166167] system 00:07: [mem 0xfe9fb400-0xfe9fb4ff window] has been reserved
[ 0.166171] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.166174] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.166178] system 00:07: [mem 0xfed45000-0xfed89fff] has been reserved
[ 0.166181] system 00:07: [mem 0xfed90000-0xfed90fff] has been reserved
[ 0.166184] system 00:07: [mem 0xfed91000-0xfed91fff] has been reserved
[ 0.166188] system 00:07: [mem 0xfed92000-0xfed92fff] has been reserved
[ 0.166191] system 00:07: [mem 0xfed93000-0xfed93fff] has been reserved
[ 0.166194] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.166198] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.166202] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166294] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.166395] system 00:09: [mem 0xffa00000-0xffbfffff] could not be reserved
[ 0.166399] system 00:09: [mem 0xffe00000-0xffffffff] could not be reserved
[ 0.166403] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166490] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.166495] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166590] system 00:0b: [io 0x0250-0x0253] has been reserved
[ 0.166594] system 00:0b: [io 0x0256-0x025f] has been reserved
[ 0.166597] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.166601] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.166606] system 00:0b: [mem 0xfec10000-0xfec17fff] has been reserved
[ 0.166609] system 00:0b: [mem 0xfec18000-0xfec1ffff] has been reserved
[ 0.166612] system 00:0b: [mem 0xfec38000-0xfec3ffff] has been reserved
[ 0.166616] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166731] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.166735] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.167100] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.167104] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.167107] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.167110] system 00:0d: [mem 0x00100000-0xbddfffff] could not be reserved
[ 0.167114] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.167282] pnp: PnP ACPI: found 14 devices
[ 0.167284] ACPI: bus type PNP unregistered
[ 0.167288] PnPBIOS: Disabled by ACPI PNP
[ 0.204466] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.204485] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.204492] pci 0000:00:1c.5: BAR 15: assigned [mem 0xbde00000-0xbdffffff 64bit pref]
[ 0.204495] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.204513] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.204520] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.204532] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.204536] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.204544] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.204550] pci 0000:00:1c.5: bridge window [mem 0xbde00000-0xbdffffff 64bit pref]
[ 0.204558] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.204575] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.204578] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.204581] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.204583] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.204586] pci_bus 0000:00: resource 8 [mem 0xbde00000-0xffffffff]
[ 0.204589] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.204592] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.204594] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.204597] pci_bus 0000:03: resource 2 [mem 0xbde00000-0xbdffffff 64bit pref]
[ 0.204600] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.204603] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.204605] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.204608] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.204610] pci_bus 0000:04: resource 8 [mem 0xbde00000-0xffffffff]
[ 0.204655] NET: Registered protocol family 2
[ 0.204902] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.204920] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.204947] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.204975] TCP: reno registered
[ 0.204977] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.204988] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.205052] NET: Registered protocol family 1
[ 0.205069] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.206230] PCI: CLS 32 bytes, default 64
[ 0.206293] Trying to unpack rootfs image as initramfs...
[ 0.657797] Freeing initrd memory: 19116K (f5a9a000 - f6d45000)
[ 0.657961] Simple Boot Flag at 0x51 set to 0x1
[ 0.658112] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 0.658124] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 0.658209] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.658212] Scanning for low memory corruption every 60 seconds
[ 0.658513] Initialise system trusted keyring
[ 0.658565] audit: initializing netlink socket (disabled)
[ 0.658583] type=2000 audit(1475167584.656:1): initialized
[ 0.685364] bounce pool size: 64 pages
[ 0.685382] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.687104] zbud: loaded
[ 0.687196] VFS: Disk quotas dquot_6.5.2
[ 0.687256] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.687849] fuse init (API version 7.22)
[ 0.687959] msgmni has been set to 1698
[ 0.688058] Key type big_key registered
[ 0.688638] Key type asymmetric registered
[ 0.688641] Asymmetric key parser 'x509' registered
[ 0.688687] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.688731] io scheduler noop registered
[ 0.688733] io scheduler deadline registered (default)
[ 0.688776] io scheduler cfq registered
[ 0.689035] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.689232] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.689424] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.689571] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.689578] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.689605] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.689607] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.689613] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.689639] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.689642] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.689647] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.689667] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.689712] pciehp 0000:00:1c.5:pcie04: HPC vendor_id 8086 device_id 294a ss_vid 8086 ss_did 294a
[ 0.689752] pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
[ 0.689759] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.689815] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.689817] vesafb: scrolling: redraw
[ 0.689820] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.690680] vesafb: framebuffer at 0xd0000000, mapped to 0xf8480000, using 3072k, total 3072k
[ 0.694694] Console: switching to colour frame buffer device 128x48
[ 0.698560] fb0: VESA VGA frame buffer device
[ 0.698590] intel_idle: does not run on family 6 model 23
[ 0.698598] ipmi message handler version 39.2
[ 0.698687] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.698754] ACPI: AC Adapter [AC0] (on-line)
[ 0.698890] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 0.698897] ACPI: Sleep Button [SLPB]
[ 0.698945] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.702477] ACPI: Lid Switch [LID]
[ 0.702529] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.702533] ACPI: Power Button [PWRF]
[ 0.703067] Monitor-Mwait will be used to enter C-1 state
[ 0.703073] Monitor-Mwait will be used to enter C-2 state
[ 0.703078] Monitor-Mwait will be used to enter C-3 state
[ 0.703081] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.703092] ACPI: acpi_idle registered with cpuidle
[ 0.710547] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.710550] ACPI: Thermal Zone [THRM] (66 C)
[ 0.710591] GHES: HEST is not enabled!
[ 0.710785] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.710790] isapnp: Scanning for PnP cards...
[ 0.712571] Linux agpgart interface v0.103
[ 0.712683] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 0.712732] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.713138] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.713258] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.715000] brd: module loaded
[ 0.715888] loop: module loaded
[ 0.716086] ata_piix 0000:00:1f.2: version 2.13
[ 0.716196] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 0.720717] scsi0 : ata_piix
[ 0.720795] scsi1 : ata_piix
[ 0.720872] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[ 0.720877] ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[ 0.720970] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.721004] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[ 0.721285] scsi2 : ata_piix
[ 0.721348] scsi3 : ata_piix
[ 0.721390] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19
[ 0.721393] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19
[ 0.721827] libphy: Fixed MDIO Bus: probed
[ 0.721957] tun: Universal TUN/TAP device driver, 1.6
[ 0.721959] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.722057] PPP generic driver version 2.4.2
[ 0.722115] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.722153] ehci-pci: EHCI PCI platform driver
[ 0.722315] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.722323] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.722341] ehci-pci 0000:00:1a.7: debug port 1
[ 0.726258] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.726303] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe9fbc00
[ 0.736036] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.736117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.736121] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.736123] usb usb1: Product: EHCI Host Controller
[ 0.736126] usb usb1: Manufacturer: Linux 3.13.0-92-generic ehci_hcd
[ 0.736129] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.736268] hub 1-0:1.0: USB hub found
[ 0.736278] hub 1-0:1.0: 6 ports detected
[ 0.737493] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.737501] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.737517] ehci-pci 0000:00:1d.7: debug port 1
[ 0.741427] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.741451] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe9fb800
[ 0.752036] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.752080] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.752083] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.752085] usb usb2: Product: EHCI Host Controller
[ 0.752088] usb usb2: Manufacturer: Linux 3.13.0-92-generic ehci_hcd
[ 0.752090] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.752210] hub 2-0:1.0: USB hub found
[ 0.752219] hub 2-0:1.0: 6 ports detected
[ 0.753325] ehci-platform: EHCI generic platform driver
[ 0.753341] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.753343] ohci-pci: OHCI PCI platform driver
[ 0.753358] ohci-platform: OHCI generic platform driver
[ 0.753367] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.753466] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.753472] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.753513] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
[ 0.753570] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.753573] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.753576] usb usb3: Product: UHCI Host Controller
[ 0.753578] usb usb3: Manufacturer: Linux 3.13.0-92-generic uhci_hcd
[ 0.753581] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.753701] hub 3-0:1.0: USB hub found
[ 0.753711] hub 3-0:1.0: 2 ports detected
[ 0.754202] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.754208] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.754250] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
[ 0.754303] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.754306] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.754309] usb usb4: Product: UHCI Host Controller
[ 0.754312] usb usb4: Manufacturer: Linux 3.13.0-92-generic uhci_hcd
[ 0.754314] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.754433] hub 4-0:1.0: USB hub found
[ 0.754443] hub 4-0:1.0: 2 ports detected
[ 0.754922] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.754929] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.754957] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000d480
[ 0.755013] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.755016] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.755019] usb usb5: Product: UHCI Host Controller
[ 0.755021] usb usb5: Manufacturer: Linux 3.13.0-92-generic uhci_hcd
[ 0.755024] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.755140] hub 5-0:1.0: USB hub found
[ 0.755148] hub 5-0:1.0: 2 ports detected
[ 0.755625] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.755632] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.755660] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 0.755715] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.755718] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.755721] usb usb6: Product: UHCI Host Controller
[ 0.755724] usb usb6: Manufacturer: Linux 3.13.0-92-generic uhci_hcd
[ 0.755726] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.755848] hub 6-0:1.0: USB hub found
[ 0.755856] hub 6-0:1.0: 2 ports detected
[ 0.756367] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.756374] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.756403] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080
[ 0.756456] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.756459] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.756462] usb usb7: Product: UHCI Host Controller
[ 0.756465] usb usb7: Manufacturer: Linux 3.13.0-92-generic uhci_hcd
[ 0.756467] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.756586] hub 7-0:1.0: USB hub found
[ 0.756594] hub 7-0:1.0: 2 ports detected
[ 0.757073] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.757080] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.757108] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[ 0.757162] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.757165] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.757167] usb usb8: Product: UHCI Host Controller
[ 0.757170] usb usb8: Manufacturer: Linux 3.13.0-92-generic uhci_hcd
[ 0.757172] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.757286] hub 8-0:1.0: USB hub found
[ 0.757295] hub 8-0:1.0: 2 ports detected
[ 0.757799] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.762410] i8042: Detected active multiplexing controller, rev 1.1
[ 0.764408] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.764415] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.764447] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.764473] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.764500] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.764623] mousedev: PS/2 mouse device common for all mice
[ 0.764807] rtc_cmos 00:02: RTC can wake from S4
[ 0.764961] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.764996] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.765094] device-mapper: uevent: version 1.0.3
[ 0.765175] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.765201] platform eisa.0: Probing EISA bus 0
[ 0.765205] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.765207] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.765210] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.765213] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.765215] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.765218] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.765220] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.765223] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.765226] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.765228] platform eisa.0: EISA: Detected 0 cards
[ 0.765237] cpufreq-nforce2: No nForce2 chipset.
[ 0.765241] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.765416] TCP: cubic registered
[ 0.765555] NET: Registered protocol family 10
[ 0.765799] NET: Registered protocol family 17
[ 0.765813] Key type dns_resolver registered
[ 0.766020] Using IPI No-Shortcut mode
[ 0.766107] Loading compiled-in X.509 certificates
[ 0.770435] Loaded X.509 cert 'Magrathea: Glacier signing key: cf9854fc95ca53b227925e98028989ef476b4315'
[ 0.770451] registered taskstats version 1
[ 0.773209] Key type trusted registered
[ 0.778066] Key type encrypted registered
[ 0.778072] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.778075] IMA: No TPM chip found, activating TPM-bypass!
[ 0.778473] regulator-dummy: disabling
[ 0.778529] Magic number: 0:133:794
[ 0.778647] rtc_cmos 00:02: setting system clock to 2016-09-29 16:46:25 UTC (1475167585)
[ 0.779290] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.779293] EDD information not available.
[ 0.779334] PM: Hibernation image not present or could not be loaded.
[ 0.822036] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.999398] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.999407] ACPI: Battery Slot [BAT0] (battery present)
[ 1.022088] isapnp: No Plug & Play device found
[ 1.048055] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 1.200106] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.200265] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.208339] ata1.00: supports DRM functions and may not be fully accessible
[ 1.208343] ata1.00: ATA-10: Crucial_CT250MX200SSD1, MU01, max UDMA/133
[ 1.208346] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.216225] ata1.00: supports DRM functions and may not be fully accessible
[ 1.217447] ata1.00: configured for UDMA/133
[ 1.217635] scsi 0:0:0:0: Direct-Access ATA Crucial_CT250MX2 MU01 PQ: 0 ANSI: 5
[ 1.217790] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.217793] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.217811] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.217856] sd 0:0:0:0: [sda] Write Protect is off
[ 1.217859] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.217883] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.218623] sda: sda1 sda2 < sda5 >
[ 1.219030] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.224245] ata2.00: ATAPI: HL-DT-STDVDRAM GT10N, 1.02, max UDMA/100
[ 1.224990] usb 1-3: New USB device found, idVendor=064e, idProduct=a116
[ 1.224993] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.224995] usb 1-3: Product: USB2.0 UVC 1.3M WebCam
[ 1.224998] usb 1-3: Manufacturer: SuYin
[ 1.225000] usb 1-3: SerialNumber: CN1316-S30B-MI033-VS-R03.02.04
[ 1.240238] ata2.00: configured for UDMA/100
[ 1.243651] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT10N 1.02 PQ: 0 ANSI: 5
[ 1.247318] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.247322] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.247460] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.247575] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.248149] Freeing unused kernel memory: 884K (c19c7000 - c1aa4000)
[ 1.248219] Write protecting the kernel text: 6584k
[ 1.248328] Write protecting the kernel read-only data: 2780k
[ 1.248329] NX-protecting the kernel data: 5704k
[ 1.266454] systemd-udevd[107]: starting version 204
[ 1.380624] random: lvm urandom read with 32 bits of entropy available
[ 1.445733] bio: create slab <bio-1> at 1
[ 1.518645] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 1.682434] init: plymouth-upstart-bridge main process (179) terminated with status 1
[ 1.682454] init: plymouth-upstart-bridge main process ended, respawning
[ 1.697377] init: plymouth-upstart-bridge main process (189) terminated with status 1
[ 1.697396] init: plymouth-upstart-bridge main process ended, respawning
[ 1.707186] init: plymouth-upstart-bridge main process (192) terminated with status 1
[ 1.707204] init: plymouth-upstart-bridge main process ended, respawning
[ 1.968564] Adding 3108860k swap on /dev/mapper/xubuntu--vg-swap_1. Priority:-1 extents:1 across:3108860k SSFS
[ 2.043575] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.183751] systemd-udevd[328]: starting version 204
[ 2.281163] psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
[ 2.325056] lp: driver loaded but no devices found
[ 2.335025] psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[ 2.341554] asus_laptop: Asus Laptop Support version 0.42
[ 2.341726] asus_laptop: K70IJ model detected
[ 2.342505] asus_laptop: Backlight controlled by ACPI video driver
[ 2.342575] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input12
[ 2.353359] ppdev: user-space parallel port driver
[ 2.413380] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 2.483921] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input11
[ 2.647133] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 2.669332] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 2.720721] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.814613] cfg80211: Calling CRDA to update world regulatory domain
[ 3.019782] [drm] Initialized drm 1.1.0 20060810
[ 3.020905] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 3.020916] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.020921] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 3.020925] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.020927] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 3.020931] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.020933] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.123649] Linux video capture interface: v2.00
[ 3.192331] [drm] Memory usable by graphics device = 2048M
[ 3.192337] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 3.192339] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 3.192363] Console: switching to colour dummy device 80x25
[ 3.232721] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 3.232741] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.232743] [drm] Driver supports precise vblank timestamp query.
[ 3.232833] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.270124] random: nonblocking pool is initialized
[ 3.397835] type=1400 audit(1475167588.113:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=498 comm="apparmor_parser"
[ 3.397845] type=1400 audit(1475167588.113:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=498 comm="apparmor_parser"
[ 3.397851] type=1400 audit(1475167588.113:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=498 comm="apparmor_parser"
[ 3.398477] type=1400 audit(1475167588.113:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=498 comm="apparmor_parser"
[ 3.398487] type=1400 audit(1475167588.113:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=498 comm="apparmor_parser"
[ 3.398801] type=1400 audit(1475167588.113:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=498 comm="apparmor_parser"
[ 3.404141] Bluetooth: Core ver 2.17
[ 3.404234] NET: Registered protocol family 31
[ 3.404237] Bluetooth: HCI device and connection manager initialized
[ 3.404246] Bluetooth: HCI socket layer initialized
[ 3.404250] Bluetooth: L2CAP socket layer initialized
[ 3.404255] Bluetooth: SCO socket layer initialized
[ 3.419809] type=1400 audit(1475167588.133:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=503 comm="apparmor_parser"
[ 3.455778] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.455783] Bluetooth: BNEP filters: protocol multicast
[ 3.455793] Bluetooth: BNEP socket layer initialized
[ 3.457682] Bluetooth: RFCOMM TTY layer initialized
[ 3.457698] Bluetooth: RFCOMM socket layer initialized
[ 3.457714] Bluetooth: RFCOMM ver 1.11
[ 3.574328] type=1400 audit(1475167588.289:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=517 comm="apparmor_parser"
[ 3.574340] type=1400 audit(1475167588.289:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=517 comm="apparmor_parser"
[ 3.617502] uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M WebCam (064e:a116)
[ 3.645235] ath: phy0: Enable LNA combining
[ 3.655289] ath: phy0: ASPM enabled: 0x42
[ 3.655294] ath: EEPROM regdomain: 0x60
[ 3.655296] ath: EEPROM indicates we should expect a direct regpair map
[ 3.655299] ath: Country alpha2 being used: 00
[ 3.655301] ath: Regpair used: 0x60
[ 3.675986] input: USB2.0 UVC 1.3M WebCam as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input13
[ 3.678746] usbcore: registered new interface driver uvcvideo
[ 3.678752] USB Video Class driver (1.1.1)
[ 3.790843] init: cups main process (521) killed by HUP signal
[ 3.790863] init: cups main process ended, respawning
[ 3.804173] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 3.806855] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf85a0000, irq=17
[ 3.909000] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
[ 4.078339] cfg80211: World regulatory domain updated:
[ 4.078344] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4.078347] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.078349] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.078352] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.078354] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.078356] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.129818] fbcon: inteldrmfb (fb0) is primary device
[ 4.760222] Console: switching to colour frame buffer device 200x56
[ 4.772064] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.772067] i915 0000:00:02.0: registered panic notifier
[ 4.772231] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 4.778822] acpi device:38: registered as cooling_device2
[ 4.778991] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input14
[ 4.779218] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.804756] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 4.882731] autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:speaker
[ 4.882737] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.882740] hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 4.882741] mono: mono_out=0x0
[ 4.882743] inputs:
[ 4.882745] Internal Mic=0x1e
[ 4.882747] Mic=0x1a
[ 4.942404] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 4.943409] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 4.944460] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 5.204670] init: failsafe main process (668) killed by TERM signal
[ 5.211866] init: samba-ad-dc main process (714) terminated with status 1
[ 6.444305] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.447781] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.466929] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.467594] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.512858] wlan0: authenticate with c6:8e:37:e4:ab:48
[ 7.545707] wlan0: send auth to c6:8e:37:e4:ab:48 (try 1/3)
[ 7.547682] wlan0: authenticated
[ 7.552063] wlan0: associate with c6:8e:37:e4:ab:48 (try 1/3)
[ 7.567000] wlan0: RX AssocResp from c6:8e:37:e4:ab:48 (capab=0x411 status=0 aid=1)
[ 7.567061] wlan0: associated
[ 7.567120] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 7.579308] audit_printk_skb: 3 callbacks suppressed
[ 7.579313] type=1400 audit(1475167592.293:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=995 comm="apparmor_parser"
[ 7.579322] type=1400 audit(1475167592.293:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=995 comm="apparmor_parser"
[ 7.579328] type=1400 audit(1475167592.293:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=995 comm="apparmor_parser"
[ 7.579931] type=1400 audit(1475167592.293:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=995 comm="apparmor_parser"
[ 7.579937] type=1400 audit(1475167592.293:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=995 comm="apparmor_parser"
[ 7.580304] type=1400 audit(1475167592.297:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=995 comm="apparmor_parser"
[ 7.585153] type=1400 audit(1475167592.301:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=994 comm="apparmor_parser"
[ 7.585166] type=1400 audit(1475167592.301:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=994 comm="apparmor_parser"
[ 7.585547] type=1400 audit(1475167592.301:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=994 comm="apparmor_parser"
[ 7.593839] type=1400 audit(1475167592.309:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=998 comm="apparmor_parser"
[ 8.888718] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000010) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 8.888729] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 8.888737] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 8.888745] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.193094] init: plymouth-upstart-bridge main process (202) killed by TERM signal
[ 9.907183] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000010) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.907196] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.907205] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.907213] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.918393] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000015) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.918405] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.918413] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.918422] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.929324] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x00000001B) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.929335] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.929344] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.929456] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.940438] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x00000001B) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.940450] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.940460] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.940468] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.951596] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000021) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.951607] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.951616] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.951624] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.962758] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000027) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.962769] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.962778] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.962786] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.974642] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000027) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.974654] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.974662] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.974670] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.985033] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x00000002D) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.985044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.985052] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.985060] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.994143] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000033) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.994154] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.994163] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.994172] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 10.004318] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000039) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 10.004329] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.004338] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.004346] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 10.017317] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000039) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 10.017328] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.017337] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.017345] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 10.027372] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x00000003F) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 10.027385] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.027393] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.027402] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 10.037617] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000045) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 10.037627] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.037636] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.037644] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 10.052679] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000045) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 10.052690] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.052700] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.052708] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 10.065241] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x00000004A) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 10.065252] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.065261] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.065269] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 10.123870] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000051) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 10.123881] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.123891] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.123899] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 10.124693] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000051) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 10.124702] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.124710] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.124718] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 10.125406] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000057) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 10.125414] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.125423] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.125431] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 10.126099] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x00000005D) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 10.126107] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.126115] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.126123] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 10.133311] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000064) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 10.133323] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.133331] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 10.133339] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 33.739669] audit_printk_skb: 81 callbacks suppressed
[ 33.739674] type=1400 audit(1475167618.454:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2170 comm="apparmor_parser"
[ 33.739683] type=1400 audit(1475167618.454:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2170 comm="apparmor_parser"
[ 33.740357] type=1400 audit(1475167618.458:51): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2170 comm="apparmor_parser"
[ 319.805563] ACPI Warning: _BQC returned an invalid level (20131115/video-678)
[ 532.360075] perf samples too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 1465.463298] perf samples too long (5013 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
systemd-analyze blame
systemd-analyze : commande introuvable
joel@joel-K70IJ:~$ pg /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/mapper/xubuntu--vg-root / ext4 errors=remount-ro 0 1
# /boot was on /dev/sda1 during installation
UUID=e64a6c9e-f12a-4b6a-ace8-0017565b42ae /boot ext2 defaults 0 2
/dev/mapper/xubuntu--vg-swap_1 none swap sw 0 0
tmpfs /tmp tmpfs defaults,size=1g 0 0
tmpfs /var/log tmpfs defaults,nosuid,nodev,noatime,mode=0755,size=5% 0 0
joel@joel-K70IJ:~$ sudo blkid
/dev/sda1: UUID="e64a6c9e-f12a-4b6a-ace8-0017565b42ae" TYPE="ext2"
/dev/sda5: UUID="TbwgHj-dLfR-W0rr-XFRh-8EVr-KD7m-yqRLLG" TYPE="LVM2_member"
/dev/mapper/xubuntu--vg-root: UUID="9e43fb5a-10cb-4a65-aa1c-52566318987e" TYPE="ext4"
/dev/mapper/xubuntu--vg-swap_1: UUID="77d3b63b-17ee-4a9b-8dbf-667c919d2873" TYPE="swap"
merci
Modération : merci à l'avenir d'utiliser les balises code (explications ici).
Dernière modification par degolarson (Le 29/09/2016, à 22:02)
2018-2020 Xubuntu 18.04 LTS 64b Nov 2020 Debian Buster Laptop Asus PRO79IJ-TY025E SSD 250Go RAM 2.9Go puis 4Go en sept2020 2 x Pentium (R) Dual-Core T4200 2GHz année 2009 LiveboxSosh
IntelMobile4SeriesGMA500, wifi Atheros 9285
Doucement, nous sommes pressés
Les jeunes sont ce qu'en font les vieux cons (Pierre Desproges )
Hors ligne
#13 Le 30/09/2016, à 17:51
- degolarson
Re : [Résolu] Ubuntu 16.04 et SSD: temps de démarrage multiplié par 6...
Bonjour
Je viens de rechronométrer le démarrage : 33 secondes. C'est pas si mal, mais moins bien que les copains. Pourrait il y avoir un problème lié aux caractéristiques de mon SSD ?
à tout hasard :
joel@joel-K70IJ:~$ lsmod
Module Size Used by
ctr 12905 1
ccm 17496 1
snd_hda_codec_hdmi 45440 1
snd_hda_codec_via 23156 1
joydev 17101 0
snd_hda_intel 42858 3
snd_hda_codec 168250 3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel
snd_hwdep 13272 1 snd_hda_codec
snd_pcm 85501 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 14230 2 snd_pcm,snd_hda_intel
snd_seq_midi 13132 0
snd_seq_midi_event 14475 1 snd_seq_midi
snd_rawmidi 25543 1 snd_seq_midi
coretemp 13195 0
uvcvideo 71309 0
videobuf2_vmalloc 13048 1 uvcvideo
snd_seq 55431 2 snd_seq_midi_event,snd_seq_midi
videobuf2_memops 13170 1 videobuf2_vmalloc
serio_raw 13230 0
arc4 12536 2
rfcomm 53664 0
videobuf2_core 39258 1 uvcvideo
bnep 18895 2
bluetooth 342208 10 bnep,rfcomm
ath9k 148698 0
videodev 108503 2 uvcvideo,videobuf2_core
snd_seq_device 14137 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 28569 2 snd_pcm,snd_seq
ath9k_common 13359 1 ath9k
ath9k_hw 438205 2 ath9k_common,ath9k
ath 23922 3 ath9k_common,ath9k,ath9k_hw
mac80211 554291 1 ath9k
snd 60939 17 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_via,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
cfg80211 417586 3 ath,ath9k,mac80211
lpc_ich 16864 0
binfmt_misc 13140 1
i915 710018 3
shpchp 32128 0
soundcore 12600 1 snd
drm_kms_helper 48868 1 i915
drm 244037 4 i915,drm_kms_helper
asus_laptop 23897 0
parport_pc 31981 0
video 18903 1 i915
sparse_keymap 13708 1 asus_laptop
ppdev 17391 0
input_polldev 13648 1 asus_laptop
lp 13299 0
i2c_algo_bit 13197 1 i915
parport 40836 3 lp,ppdev,parport_pc
mac_hid 13037 0
psmouse 95439 0
pata_acpi 12886 0
atl1e 32995 0
joel@joel-K70IJ:~$ sudo lshw
[sudo] password for joel:
joel-k70ij
description: Ordinateur Bloc-notes
produit: K70IJ ()
fabriquant: ASUSTeK Computer Inc.
version: 1.0
numéro de série: 101527600051
bits: 32 bits
fonctionnalités: smbios-2.5 dmi-2.5 smp-1.4 smp
configuration: chassis=notebook cpus=2 uuid=0043239E-9896-DE81-3292-90E6BA1D984E
*-core
description: Carte mère
produit: K70IJ
fabriquant: ASUSTeK Computer Inc.
identifiant matériel: 0
version: 1.0
numéro de série: BSN12345678901234567
emplacement: MIDDLE
*-firmware
description: BIOS
fabriquant: American Megatrends Inc.
identifiant matériel: 0
version: 203
date: 08/03/2009
taille: 64KiB
capacité: 960KiB
fonctionnalités: isa pci pnp upgrade shadowing escd cdboot bootselect edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int17printer int10video acpi usb smartbattery biosbootspecification netboot
*-cpu:0
description: CPU
produit: Pentium(R) Dual-Core CPU T4200 @ 2.00GHz
fabriquant: Intel Corp.
identifiant matériel: 4
information bus: cpu@0
version: 6.7.10
numéro de série: 0001-067A-0000-0000-0000-0000
emplacement: Socket 478
taille: 1200MHz
capacité: 2GHz
bits: 64 bits
horloge: 200MHz
fonctionnalités: x86-64 boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm xsave lahf_lm dtherm cpufreq
configuration: cores=2 enabledcores=2 id=0 threads=2
*-cache:0
description: L1 cache
identifiant matériel: 5
emplacement: L1-Cache
taille: 64KiB
capacité: 64KiB
fonctionnalités: internal write-back data
*-cache:1
description: L2 cache
identifiant matériel: 7
emplacement: L2-Cache
taille: 1MiB
capacité: 1MiB
fonctionnalités: internal write-back unified
*-logicalcpu:0
description: CPU Logique
identifiant matériel: 0.1
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:1
description: CPU Logique
identifiant matériel: 0.2
bits: 64 bits
fonctionnalités: logical
*-cache
description: L1 cache
identifiant matériel: 6
emplacement: L1-Cache
taille: 64KiB
capacité: 64KiB
fonctionnalités: internal write-back instruction
*-memory
description: Mémoire Système
identifiant matériel: 1f
emplacement: Carte mère
taille: 3GiB
*-bank:0
description: SODIMM DDR2 Synchrone 667 MHz (1,5 ns)
produit: N/A
fabriquant: N/A
identifiant matériel: 0
numéro de série: N/A
emplacement: SODIMM0
taille: 2GiB
bits: 64 bits
horloge: 667MHz (1.5ns)
*-bank:1
description: SODIMM DDR2 Synchrone 667 MHz (1,5 ns)
produit: N/A
fabriquant: N/A
identifiant matériel: 1
numéro de série: N/A
emplacement: SODIMM1
taille: 1GiB
bits: 64 bits
horloge: 667MHz (1.5ns)
*-cpu:1
identifiant matériel: 1
information bus: cpu@1
version: 6.7.10
numéro de série: 0001-067A-0000-0000-0000-0000
taille: 2GHz
capacité: 2GHz
fonctionnalités: ht cpufreq
configuration: id=0
*-logicalcpu:0
description: CPU Logique
identifiant matériel: 0.1
fonctionnalités: logical
*-logicalcpu:1
description: CPU Logique
identifiant matériel: 0.2
fonctionnalités: logical
*-pci
description: Host bridge
produit: Mobile 4 Series Chipset Memory Controller Hub
fabriquant: Intel Corporation
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: 09
bits: 32 bits
horloge: 33MHz
configuration: driver=agpgart-intel
ressources: irq:0
*-display:0
description: VGA compatible controller
produit: Mobile 4 Series Chipset Integrated Graphics Controller
fabriquant: Intel Corporation
identifiant matériel: 2
information bus: pci@0000:00:02.0
version: 09
bits: 64 bits
horloge: 33MHz
fonctionnalités: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
ressources: irq:43 mémoire:fe400000-fe7fffff mémoire:d0000000-dfffffff portE/S:dc00(taille=8)
*-display:1 NON-RÉCLAMÉ
description: Display controller
produit: Mobile 4 Series Chipset Integrated Graphics Controller
fabriquant: Intel Corporation
identifiant matériel: 2.1
information bus: pci@0000:00:02.1
version: 09
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration: latency=0
ressources: mémoire:fe800000-fe8fffff
*-usb:0
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #4
fabriquant: Intel Corporation
identifiant matériel: 1a
information bus: pci@0000:00:1a.0
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:16 portE/S:d880(taille=32)
*-usb:1
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #5
fabriquant: Intel Corporation
identifiant matériel: 1a.1
information bus: pci@0000:00:1a.1
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:21 portE/S:d800(taille=32)
*-usb:2
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #6
fabriquant: Intel Corporation
identifiant matériel: 1a.2
information bus: pci@0000:00:1a.2
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:19 portE/S:d480(taille=32)
*-usb:3
description: USB controller
produit: 82801I (ICH9 Family) USB2 EHCI Controller #2
fabriquant: Intel Corporation
identifiant matériel: 1a.7
information bus: pci@0000:00:1a.7
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
ressources: irq:18 mémoire:fe9fbc00-fe9fbfff
*-multimedia
description: Audio device
produit: 82801I (ICH9 Family) HD Audio Controller
fabriquant: Intel Corporation
identifiant matériel: 1b
information bus: pci@0000:00:1b.0
version: 03
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
ressources: irq:44 mémoire:fe9f4000-fe9f7fff
*-pci:0
description: PCI bridge
produit: 82801I (ICH9 Family) PCI Express Port 1
fabriquant: Intel Corporation
identifiant matériel: 1c
information bus: pci@0000:00:1c.0
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:40
*-pci:1
description: PCI bridge
produit: 82801I (ICH9 Family) PCI Express Port 2
fabriquant: Intel Corporation
identifiant matériel: 1c.1
information bus: pci@0000:00:1c.1
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:41 mémoire:fea00000-feafffff
*-network
description: Interface réseau sans fil
produit: AR9285 Wireless Network Adapter (PCI-Express)
fabriquant: Qualcomm Atheros
identifiant matériel: 0
information bus: pci@0000:02:00.0
nom logique: wlan0
version: 01
numéro de série: 00:25:d3:6f:1f:64
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=ath9k driverversion=3.13.0-92-generic firmware=N/A ip=192.168.0.10 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn
ressources: irq:17 mémoire:feaf0000-feafffff
*-pci:2
description: PCI bridge
produit: 82801I (ICH9 Family) PCI Express Port 6
fabriquant: Intel Corporation
identifiant matériel: 1c.5
information bus: pci@0000:00:1c.5
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:42 portE/S:e000(taille=4096) mémoire:feb00000-febfffff portE/S:bde00000(taille=2097152)
*-network
description: Ethernet interface
produit: AR8121/AR8113/AR8114 Gigabit or Fast Ethernet
fabriquant: Qualcomm Atheros
identifiant matériel: 0
information bus: pci@0000:03:00.0
nom logique: eth0
version: b0
numéro de série: 90:e6:ba:1d:98:4e
capacité: 1Gbit/s
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=ATL1E driverversion=1.0.0.7-NAPI firmware=L1e latency=0 link=no multicast=yes port=twisted pair
ressources: irq:17 mémoire:febc0000-febfffff portE/S:ec00(taille=128)
*-usb:4
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #1
fabriquant: Intel Corporation
identifiant matériel: 1d
information bus: pci@0000:00:1d.0
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:23 portE/S:d400(taille=32)
*-usb:5
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #2
fabriquant: Intel Corporation
identifiant matériel: 1d.1
information bus: pci@0000:00:1d.1
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:19 portE/S:d080(taille=32)
*-usb:6
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #3
fabriquant: Intel Corporation
identifiant matériel: 1d.2
information bus: pci@0000:00:1d.2
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:18 portE/S:d000(taille=32)
*-usb:7
description: USB controller
produit: 82801I (ICH9 Family) USB2 EHCI Controller #1
fabriquant: Intel Corporation
identifiant matériel: 1d.7
information bus: pci@0000:00:1d.7
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
ressources: irq:23 mémoire:fe9fb800-fe9fbbff
*-pci:3
description: PCI bridge
produit: 82801 Mobile PCI Bridge
fabriquant: Intel Corporation
identifiant matériel: 1e
information bus: pci@0000:00:1e.0
version: 93
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci subtractive_decode bus_master cap_list
*-isa
description: ISA bridge
produit: ICH9M LPC Interface Controller
fabriquant: Intel Corporation
identifiant matériel: 1f
information bus: pci@0000:00:1f.0
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
ressources: irq:0
*-ide:0
description: IDE interface
produit: 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode]
fabriquant: Intel Corporation
identifiant matériel: 1f.2
information bus: pci@0000:00:1f.2
version: 03
bits: 32 bits
horloge: 66MHz
fonctionnalités: ide pm bus_master cap_list
configuration: driver=ata_piix latency=0
ressources: irq:19 portE/S:cc00(taille=8) portE/S:c880(taille=4) portE/S:c800(taille=8) portE/S:c480(taille=4) portE/S:c400(taille=16) portE/S:c080(taille=16)
*-ide:1
description: IDE interface
produit: 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode]
fabriquant: Intel Corporation
identifiant matériel: 1f.5
information bus: pci@0000:00:1f.5
version: 03
bits: 32 bits
horloge: 66MHz
fonctionnalités: ide pm bus_master cap_list
configuration: driver=ata_piix latency=0
ressources: irq:19 portE/S:bc00(taille=8) portE/S:b880(taille=4) portE/S:b800(taille=8) portE/S:b480(taille=4) portE/S:b400(taille=16) portE/S:b080(taille=16)
*-scsi:0
identifiant matériel: 2
nom logique: scsi0
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: Crucial_CT250MX2
identifiant matériel: 0.0.0
information bus: scsi@0:0.0.0
nom logique: /dev/sda
version: MU01
numéro de série: 1528100B6C34
taille: 232GiB (250GB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 sectorsize=4096 signature=000255fc
*-volume:0
description: Linux filesystem partition
fabriquant: Linux
identifiant matériel: 1
information bus: scsi@0:0.0.0,1
nom logique: /dev/sda1
nom logique: /boot
version: 1.0
numéro de série: e64a6c9e-f12a-4b6a-ace8-0017565b42ae
taille: 243MiB
capacité: 243MiB
fonctionnalités: primary bootable extended_attributes ext2 initialized
configuration: filesystem=ext2 lastmountpoint=/boot modified=2016-09-30 17:32:52 mount.fstype=ext2 mount.options=rw,relatime,stripe=4 mounted=2016-09-30 17:32:52 state=mounted
*-volume:1
description: Extended partition
identifiant matériel: 2
information bus: scsi@0:0.0.0,2
nom logique: /dev/sda2
taille: 232GiB
capacité: 232GiB
fonctionnalités: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux LVM Physical Volume partition
identifiant matériel: 5
nom logique: /dev/sda5
numéro de série: TbwgHj-dLfR-W0rr-XFRh-8EVr-KD7m-yqRLLG
taille: 232GiB
capacité: 232GiB
fonctionnalités: multi lvm2
*-scsi:1
identifiant matériel: 3
nom logique: scsi1
fonctionnalités: emulated
*-cdrom
description: DVD-RAM writer
produit: DVDRAM GT10N
fabriquant: HL-DT-ST
identifiant matériel: 0.0.0
information bus: scsi@1:0.0.0
nom logique: /dev/cdrom
nom logique: /dev/sr0
version: 1.02
fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=nodisc
*-battery
description: Autre Battery
produit: F82--22
fabriquant: AS044Ih43E
identifiant matériel: 1
version: 09/08/24
numéro de série: 0000
emplacement: In the back
capacité: 4200mWh
configuration: voltage=11,1V
Ajout : j'ai poussé la curiosité ici
et tant que j'y suis :dmesg
[ 0.004123] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004394] Initializing cgroup subsys memory
[ 0.004402] Initializing cgroup subsys devices
[ 0.004405] Initializing cgroup subsys freezer
[ 0.004407] Initializing cgroup subsys blkio
[ 0.004410] Initializing cgroup subsys perf_event
[ 0.004413] Initializing cgroup subsys hugetlb
[ 0.004445] CPU: Physical Processor ID: 0
[ 0.004447] CPU: Processor Core ID: 0
[ 0.004450] mce: CPU supports 6 MCE banks
[ 0.004458] CPU0: Thermal monitoring handled by SMI
[ 0.004461] process: using mwait in idle threads
[ 0.004472] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.004472] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.004472] tlb_flushall_shift: -1
[ 0.004852] Freeing SMP alternatives memory: 32K (c1aa4000 - c1aac000)
[ 0.006102] ACPI: Core revision 20131115
[ 0.016026] ACPI: All ACPI Tables successfully acquired
[ 0.020006] ftrace: allocating 27907 entries in 55 pages
[ 0.032108] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.032483] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072566] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU T4200 @ 2.00GHz (fam: 06, model: 17, stepping: 0a)
[ 0.076000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.076000] ... version: 2
[ 0.076000] ... bit width: 40
[ 0.076000] ... generic registers: 2
[ 0.076000] ... value mask: 000000ffffffffff
[ 0.076000] ... max period: 000000007fffffff
[ 0.076000] ... fixed-purpose events: 3
[ 0.076000] ... event mask: 0000000700000003
[ 0.076000] CPU 1 irqstacks, hard=f70ec000 soft=f70ee000
[ 0.076000] x86: Booting SMP configuration:
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.076000] .... node #0, CPUs: #1
[ 0.087421] x86: Booted up 1 node, 2 CPUs
[ 0.087427] smpboot: Total of 2 processors activated (7980.24 BogoMIPS)
[ 0.087522] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.088163] devtmpfs: initialized
[ 0.088272] EVM: security.selinux
[ 0.088274] EVM: security.SMACK64
[ 0.088276] EVM: security.ima
[ 0.088277] EVM: security.capability
[ 0.088399] PM: Registering ACPI NVS region [mem 0xbdd8f000-0xbdddffff] (331776 bytes)
[ 0.089736] pinctrl core: initialized pinctrl subsystem
[ 0.089833] regulator-dummy: no parameters
[ 0.089874] RTC time: 15:32:49, date: 09/30/16
[ 0.089928] NET: Registered protocol family 16
[ 0.090132] EISA bus registered
[ 0.090135] cpuidle: using governor ladder
[ 0.090136] cpuidle: using governor menu
[ 0.090239] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.090241] ACPI: bus type PCI registered
[ 0.090245] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.090330] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.090334] PCI: not using MMCONFIG
[ 0.090472] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.090587] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 0.090589] PCI: Using configuration type 1 for base access
[ 0.092095] bio: create slab <bio-0> at 0
[ 0.092124] ACPI: Added _OSI(Module Device)
[ 0.092127] ACPI: Added _OSI(Processor Device)
[ 0.092129] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.092131] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.092131] ACPI : EC: EC description table is found, configuring boot EC
[ 0.105662] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.108420] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.120170] ACPI BIOS Warning (bug): Incorrect checksum in table [ATKG] - 0xC3, should be 0xE5 (20131115/tbprint-214)
[ 0.120442] ACPI: SSDT bdd993f0 000206 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.121044] ACPI: Dynamic OEM Table Load:
[ 0.121047] ACPI: SSDT (null) 000206 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.121217] ACPI: SSDT bdd99690 000765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.121800] ACPI: Dynamic OEM Table Load:
[ 0.121803] ACPI: SSDT (null) 000765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.122062] ACPI: SSDT bdd99320 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.122654] ACPI: Dynamic OEM Table Load:
[ 0.122657] ACPI: SSDT (null) 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.122751] ACPI: SSDT bdd99600 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.123334] ACPI: Dynamic OEM Table Load:
[ 0.123337] ACPI: SSDT (null) 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.123687] ACPI: Interpreter enabled
[ 0.123713] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.123719] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.123737] ACPI: (supports S0 S3 S4 S5)
[ 0.123739] ACPI: Using IOAPIC for interrupt routing
[ 0.123774] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.125538] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.125540] PCI: Using MMCONFIG for extended config space
[ 0.125563] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.125887] ACPI: No dock devices found.
[ 0.137561] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.137570] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.137991] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.137994] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.138405] PCI host bridge to bus 0000:00
[ 0.138409] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.138412] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.138415] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.138418] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.138420] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.138423] pci_bus 0000:00: root bus resource [mem 0xbde00000-0xffffffff]
[ 0.138435] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.138463] DMAR: Forcing write-buffer flush capability
[ 0.138464] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.138569] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.138586] pci 0000:00:02.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit]
[ 0.138596] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.138603] pci 0000:00:02.0: reg 0x20: [io 0xdc00-0xdc07]
[ 0.138720] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.138734] pci 0000:00:02.1: reg 0x10: [mem 0xfe800000-0xfe8fffff 64bit]
[ 0.138904] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.138973] pci 0000:00:1a.0: reg 0x20: [io 0xd880-0xd89f]
[ 0.139115] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.139166] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.139234] pci 0000:00:1a.1: reg 0x20: [io 0xd800-0xd81f]
[ 0.139375] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.139429] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.139498] pci 0000:00:1a.2: reg 0x20: [io 0xd480-0xd49f]
[ 0.139639] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.139698] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.139729] pci 0000:00:1a.7: reg 0x10: [mem 0xfe9fbc00-0xfe9fbfff]
[ 0.139861] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.139982] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.140047] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.140074] pci 0000:00:1b.0: reg 0x10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ 0.140190] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.140263] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.140313] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.140422] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.140495] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.140542] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.140660] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.140781] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.140900] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.140973] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.141024] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.141092] pci 0000:00:1d.0: reg 0x20: [io 0xd400-0xd41f]
[ 0.141235] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.141284] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.141352] pci 0000:00:1d.1: reg 0x20: [io 0xd080-0xd09f]
[ 0.141494] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.141543] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.141611] pci 0000:00:1d.2: reg 0x20: [io 0xd000-0xd01f]
[ 0.141751] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.141813] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.141844] pci 0000:00:1d.7: reg 0x10: [mem 0xfe9fb800-0xfe9fbbff]
[ 0.141976] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.142092] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.142140] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.142270] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.142320] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 0.142562] pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018f
[ 0.142589] pci 0000:00:1f.2: reg 0x10: [io 0xcc00-0xcc07]
[ 0.142602] pci 0000:00:1f.2: reg 0x14: [io 0xc880-0xc883]
[ 0.142616] pci 0000:00:1f.2: reg 0x18: [io 0xc800-0xc807]
[ 0.142629] pci 0000:00:1f.2: reg 0x1c: [io 0xc480-0xc483]
[ 0.142642] pci 0000:00:1f.2: reg 0x20: [io 0xc400-0xc40f]
[ 0.142655] pci 0000:00:1f.2: reg 0x24: [io 0xc080-0xc08f]
[ 0.142818] pci 0000:00:1f.5: [8086:292d] type 00 class 0x010185
[ 0.142844] pci 0000:00:1f.5: reg 0x10: [io 0xbc00-0xbc07]
[ 0.142857] pci 0000:00:1f.5: reg 0x14: [io 0xb880-0xb883]
[ 0.142871] pci 0000:00:1f.5: reg 0x18: [io 0xb800-0xb807]
[ 0.142884] pci 0000:00:1f.5: reg 0x1c: [io 0xb480-0xb483]
[ 0.142897] pci 0000:00:1f.5: reg 0x20: [io 0xb400-0xb40f]
[ 0.142910] pci 0000:00:1f.5: reg 0x24: [io 0xb080-0xb08f]
[ 0.143134] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.143268] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[ 0.143301] pci 0000:02:00.0: reg 0x10: [mem 0xfeaf0000-0xfeafffff 64bit]
[ 0.143455] pci 0000:02:00.0: supports D1
[ 0.143457] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.148021] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.148031] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.148154] pci 0000:03:00.0: [1969:1026] type 00 class 0x020000
[ 0.148188] pci 0000:03:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
[ 0.148205] pci 0000:03:00.0: reg 0x18: [io 0xec00-0xec7f]
[ 0.148346] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.148386] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.156019] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.156025] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.156031] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.156153] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.156169] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.156172] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.156175] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.156177] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.156180] pci 0000:00:1e.0: bridge window [mem 0xbde00000-0xffffffff] (subtractive decode)
[ 0.156218] pci_bus 0000:00: on NUMA node 0
[ 0.157102] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
[ 0.157177] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
[ 0.157248] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[ 0.157317] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
[ 0.157389] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
[ 0.157459] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
[ 0.157530] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
[ 0.157602] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
[ 0.157955] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.157963] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.158044] Found 1 acpi root devices
[ 0.158139] ACPI : EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 0.158256] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.158256] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.158256] vgaarb: loaded
[ 0.158256] vgaarb: bridge control possible 0000:00:02.0
[ 0.158256] SCSI subsystem initialized
[ 0.158256] libata version 3.00 loaded.
[ 0.158256] ACPI: bus type USB registered
[ 0.158256] usbcore: registered new interface driver usbfs
[ 0.158256] usbcore: registered new interface driver hub
[ 0.158256] usbcore: registered new device driver usb
[ 0.158256] PCI: Using ACPI for IRQ routing
[ 0.158256] PCI: pci_cache_line_size set to 64 bytes
[ 0.158256] e820: reserve RAM buffer [mem 0x00098c00-0x0009ffff]
[ 0.158256] e820: reserve RAM buffer [mem 0xbdd80000-0xbfffffff]
[ 0.158256] NetLabel: Initializing
[ 0.158256] NetLabel: domain hash size = 128
[ 0.158256] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.158256] NetLabel: unlabeled traffic allowed by default
[ 0.158256] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.158256] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.158256] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.161015] Switched to clocksource hpet
[ 0.169388] AppArmor: AppArmor Filesystem Enabled
[ 0.169430] pnp: PnP ACPI init
[ 0.169452] ACPI: bus type PNP registered
[ 0.169553] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.169558] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.169608] pnp 00:01: [dma 4]
[ 0.169635] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.169687] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.169753] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.169832] pnp 00:04: Plug and Play ACPI device, IDs ETD0001 PNP0f0e PNP0f0b PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.169867] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.169904] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.170133] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.170137] system 00:07: [io 0x0800-0x087f] could not be reserved
[ 0.170140] system 00:07: [io 0x0400-0x041f] has been reserved
[ 0.170146] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.170150] system 00:07: [mem 0xfe9fb400-0xfe9fb4ff window] has been reserved
[ 0.170153] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.170157] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.170160] system 00:07: [mem 0xfed45000-0xfed89fff] has been reserved
[ 0.170163] system 00:07: [mem 0xfed90000-0xfed90fff] has been reserved
[ 0.170167] system 00:07: [mem 0xfed91000-0xfed91fff] has been reserved
[ 0.170170] system 00:07: [mem 0xfed92000-0xfed92fff] has been reserved
[ 0.170173] system 00:07: [mem 0xfed93000-0xfed93fff] has been reserved
[ 0.170176] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.170180] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.170184] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.170275] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.170377] system 00:09: [mem 0xffa00000-0xffbfffff] could not be reserved
[ 0.170381] system 00:09: [mem 0xffe00000-0xffffffff] could not be reserved
[ 0.170385] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.170473] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.170477] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.170573] system 00:0b: [io 0x0250-0x0253] has been reserved
[ 0.170576] system 00:0b: [io 0x0256-0x025f] has been reserved
[ 0.170580] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.170583] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.170588] system 00:0b: [mem 0xfec10000-0xfec17fff] has been reserved
[ 0.170592] system 00:0b: [mem 0xfec18000-0xfec1ffff] has been reserved
[ 0.170595] system 00:0b: [mem 0xfec38000-0xfec3ffff] has been reserved
[ 0.170599] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.170713] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.170718] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.171083] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.171087] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.171090] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.171094] system 00:0d: [mem 0x00100000-0xbddfffff] could not be reserved
[ 0.171097] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.171265] pnp: PnP ACPI: found 14 devices
[ 0.171267] ACPI: bus type PNP unregistered
[ 0.171271] PnPBIOS: Disabled by ACPI PNP
[ 0.208443] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.208462] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.208470] pci 0000:00:1c.5: BAR 15: assigned [mem 0xbde00000-0xbdffffff 64bit pref]
[ 0.208473] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.208491] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.208498] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.208510] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.208514] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.208521] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.208527] pci 0000:00:1c.5: bridge window [mem 0xbde00000-0xbdffffff 64bit pref]
[ 0.208536] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.208553] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.208556] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.208559] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.208561] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.208564] pci_bus 0000:00: resource 8 [mem 0xbde00000-0xffffffff]
[ 0.208567] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.208570] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.208572] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.208575] pci_bus 0000:03: resource 2 [mem 0xbde00000-0xbdffffff 64bit pref]
[ 0.208578] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.208580] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.208583] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.208586] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.208588] pci_bus 0000:04: resource 8 [mem 0xbde00000-0xffffffff]
[ 0.208633] NET: Registered protocol family 2
[ 0.208881] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.208898] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.208926] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.208955] TCP: reno registered
[ 0.208957] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.208966] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.209029] NET: Registered protocol family 1
[ 0.209047] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.210203] PCI: CLS 32 bytes, default 64
[ 0.210265] Trying to unpack rootfs image as initramfs...
[ 0.661891] Freeing initrd memory: 19116K (f5a9a000 - f6d45000)
[ 0.661996] Simple Boot Flag at 0x51 set to 0x1
[ 0.662177] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 0.662187] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 0.662275] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.662278] Scanning for low memory corruption every 60 seconds
[ 0.662590] Initialise system trusted keyring
[ 0.662643] audit: initializing netlink socket (disabled)
[ 0.662660] type=2000 audit(1475249569.660:1): initialized
[ 0.689446] bounce pool size: 64 pages
[ 0.689461] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.691181] zbud: loaded
[ 0.691273] VFS: Disk quotas dquot_6.5.2
[ 0.691334] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.691924] fuse init (API version 7.22)
[ 0.692056] msgmni has been set to 1698
[ 0.692134] Key type big_key registered
[ 0.692738] Key type asymmetric registered
[ 0.692740] Asymmetric key parser 'x509' registered
[ 0.692789] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.692835] io scheduler noop registered
[ 0.692838] io scheduler deadline registered (default)
[ 0.692879] io scheduler cfq registered
[ 0.693133] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.693328] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.693520] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.693670] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.693677] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.693703] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.693706] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.693712] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.693738] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.693740] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.693746] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.693764] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.693809] pciehp 0000:00:1c.5:pcie04: HPC vendor_id 8086 device_id 294a ss_vid 8086 ss_did 294a
[ 0.693849] pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
[ 0.693855] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.693913] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.693915] vesafb: scrolling: redraw
[ 0.693918] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.694778] vesafb: framebuffer at 0xd0000000, mapped to 0xf8480000, using 3072k, total 3072k
[ 0.698788] Console: switching to colour frame buffer device 128x48
[ 0.702653] fb0: VESA VGA frame buffer device
[ 0.702685] intel_idle: does not run on family 6 model 23
[ 0.702693] ipmi message handler version 39.2
[ 0.702779] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.702846] ACPI: AC Adapter [AC0] (on-line)
[ 0.702982] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 0.702989] ACPI: Sleep Button [SLPB]
[ 0.703039] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.706211] ACPI: Lid Switch [LID]
[ 0.706265] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.706269] ACPI: Power Button [PWRF]
[ 0.706773] Monitor-Mwait will be used to enter C-1 state
[ 0.706787] Monitor-Mwait will be used to enter C-2 state
[ 0.706799] Monitor-Mwait will be used to enter C-3 state
[ 0.706808] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.706823] ACPI: acpi_idle registered with cpuidle
[ 0.715451] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.715454] ACPI: Thermal Zone [THRM] (56 C)
[ 0.715494] GHES: HEST is not enabled!
[ 0.715686] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.715690] isapnp: Scanning for PnP cards...
[ 0.754399] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.754409] ACPI: Battery Slot [BAT0] (battery present)
[ 0.765503] Linux agpgart interface v0.103
[ 0.765618] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 0.765665] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.766072] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.766187] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.767924] brd: module loaded
[ 0.768854] loop: module loaded
[ 0.769019] ata_piix 0000:00:1f.2: version 2.13
[ 0.769132] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 0.770135] scsi0 : ata_piix
[ 0.770209] scsi1 : ata_piix
[ 0.770256] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[ 0.770261] ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[ 0.770354] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.770387] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[ 0.770692] scsi2 : ata_piix
[ 0.770758] scsi3 : ata_piix
[ 0.770800] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19
[ 0.770803] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19
[ 0.771209] libphy: Fixed MDIO Bus: probed
[ 0.771345] tun: Universal TUN/TAP device driver, 1.6
[ 0.771346] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.771425] PPP generic driver version 2.4.2
[ 0.771479] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.771486] ehci-pci: EHCI PCI platform driver
[ 0.771615] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.771623] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.771641] ehci-pci 0000:00:1a.7: debug port 1
[ 0.775564] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.775587] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe9fbc00
[ 0.784031] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.784096] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.784099] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.784102] usb usb1: Product: EHCI Host Controller
[ 0.784105] usb usb1: Manufacturer: Linux 3.13.0-92-generic ehci_hcd
[ 0.784107] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.784242] hub 1-0:1.0: USB hub found
[ 0.784253] hub 1-0:1.0: 6 ports detected
[ 0.785466] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.785473] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.785489] ehci-pci 0000:00:1d.7: debug port 1
[ 0.789390] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.789415] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe9fb800
[ 0.800034] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.800086] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.800089] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.800092] usb usb2: Product: EHCI Host Controller
[ 0.800094] usb usb2: Manufacturer: Linux 3.13.0-92-generic ehci_hcd
[ 0.800097] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.800215] hub 2-0:1.0: USB hub found
[ 0.800224] hub 2-0:1.0: 6 ports detected
[ 0.801328] ehci-platform: EHCI generic platform driver
[ 0.801345] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.801346] ohci-pci: OHCI PCI platform driver
[ 0.801361] ohci-platform: OHCI generic platform driver
[ 0.801372] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.801470] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.801476] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.801519] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
[ 0.801574] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.801577] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.801580] usb usb3: Product: UHCI Host Controller
[ 0.801583] usb usb3: Manufacturer: Linux 3.13.0-92-generic uhci_hcd
[ 0.801585] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.801702] hub 3-0:1.0: USB hub found
[ 0.801710] hub 3-0:1.0: 2 ports detected
[ 0.802200] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.802207] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.802247] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
[ 0.802301] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.802304] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.802307] usb usb4: Product: UHCI Host Controller
[ 0.802309] usb usb4: Manufacturer: Linux 3.13.0-92-generic uhci_hcd
[ 0.802312] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.802426] hub 4-0:1.0: USB hub found
[ 0.802434] hub 4-0:1.0: 2 ports detected
[ 0.802909] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.802917] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.802946] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000d480
[ 0.802999] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.803002] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.803005] usb usb5: Product: UHCI Host Controller
[ 0.803007] usb usb5: Manufacturer: Linux 3.13.0-92-generic uhci_hcd
[ 0.803010] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.803129] hub 5-0:1.0: USB hub found
[ 0.803137] hub 5-0:1.0: 2 ports detected
[ 0.803621] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.803627] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.803656] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 0.803709] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.803712] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.803715] usb usb6: Product: UHCI Host Controller
[ 0.803717] usb usb6: Manufacturer: Linux 3.13.0-92-generic uhci_hcd
[ 0.803720] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.803833] hub 6-0:1.0: USB hub found
[ 0.803843] hub 6-0:1.0: 2 ports detected
[ 0.804348] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.804354] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.804383] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080
[ 0.804437] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.804440] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.804443] usb usb7: Product: UHCI Host Controller
[ 0.804445] usb usb7: Manufacturer: Linux 3.13.0-92-generic uhci_hcd
[ 0.804448] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.804562] hub 7-0:1.0: USB hub found
[ 0.804570] hub 7-0:1.0: 2 ports detected
[ 0.805048] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.805055] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.805084] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[ 0.805139] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.805143] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.805146] usb usb8: Product: UHCI Host Controller
[ 0.805148] usb usb8: Manufacturer: Linux 3.13.0-92-generic uhci_hcd
[ 0.805151] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.805266] hub 8-0:1.0: USB hub found
[ 0.805274] hub 8-0:1.0: 2 ports detected
[ 0.805780] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.808894] i8042: Detected active multiplexing controller, rev 1.1
[ 0.811139] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.811147] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.811179] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.811204] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.811232] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.811358] mousedev: PS/2 mouse device common for all mice
[ 0.811537] rtc_cmos 00:02: RTC can wake from S4
[ 0.811691] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.811727] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.811824] device-mapper: uevent: version 1.0.3
[ 0.811903] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.811928] platform eisa.0: Probing EISA bus 0
[ 0.811932] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.811935] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.811937] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.811940] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.811942] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.811945] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.811948] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.811950] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.811953] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.811955] platform eisa.0: EISA: Detected 0 cards
[ 0.811965] cpufreq-nforce2: No nForce2 chipset.
[ 0.811970] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.812167] TCP: cubic registered
[ 0.812303] NET: Registered protocol family 10
[ 0.812543] NET: Registered protocol family 17
[ 0.812561] Key type dns_resolver registered
[ 0.812762] Using IPI No-Shortcut mode
[ 0.812848] Loading compiled-in X.509 certificates
[ 0.817154] Loaded X.509 cert 'Magrathea: Glacier signing key: cf9854fc95ca53b227925e98028989ef476b4315'
[ 0.817173] registered taskstats version 1
[ 0.819909] Key type trusted registered
[ 0.824760] Key type encrypted registered
[ 0.824768] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.824771] IMA: No TPM chip found, activating TPM-bypass!
[ 0.825177] regulator-dummy: disabling
[ 0.825233] Magic number: 0:343:539
[ 0.825266] tty ttyS19: hash matches
[ 0.825356] rtc_cmos 00:02: setting system clock to 2016-09-30 15:32:50 UTC (1475249570)
[ 0.825994] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.825996] EDD information not available.
[ 0.826042] PM: Hibernation image not present or could not be loaded.
[ 0.851590] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.027061] isapnp: No Plug & Play device found
[ 1.096059] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 1.244089] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.244257] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.252351] ata1.00: supports DRM functions and may not be fully accessible
[ 1.252355] ata1.00: ATA-10: Crucial_CT250MX200SSD1, MU01, max UDMA/133
[ 1.252358] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.252418] ata2.00: ATAPI: HL-DT-STDVDRAM GT10N, 1.02, max UDMA/100
[ 1.260230] ata1.00: supports DRM functions and may not be fully accessible
[ 1.261455] ata1.00: configured for UDMA/133
[ 1.261640] scsi 0:0:0:0: Direct-Access ATA Crucial_CT250MX2 MU01 PQ: 0 ANSI: 5
[ 1.261794] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.261797] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.261814] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.261860] sd 0:0:0:0: [sda] Write Protect is off
[ 1.261863] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.261890] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.262631] sda: sda1 sda2 < sda5 >
[ 1.263039] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.268236] ata2.00: configured for UDMA/100
[ 1.269957] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT10N 1.02 PQ: 0 ANSI: 5
[ 1.272286] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.272289] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.272432] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.272551] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.273072] Freeing unused kernel memory: 884K (c19c7000 - c1aa4000)
[ 1.273152] Write protecting the kernel text: 6584k
[ 1.273262] Write protecting the kernel read-only data: 2780k
[ 1.273264] NX-protecting the kernel data: 5704k
[ 1.273294] usb 1-3: New USB device found, idVendor=064e, idProduct=a116
[ 1.273297] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.273301] usb 1-3: Product: USB2.0 UVC 1.3M WebCam
[ 1.273303] usb 1-3: Manufacturer: SuYin
[ 1.273306] usb 1-3: SerialNumber: CN1316-S30B-MI033-VS-R03.02.04
[ 1.291472] systemd-udevd[108]: starting version 204
[ 1.395477] random: lvm urandom read with 31 bits of entropy available
[ 1.461562] bio: create slab <bio-1> at 1
[ 1.529428] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 1.694198] init: plymouth-upstart-bridge main process (180) terminated with status 1
[ 1.694217] init: plymouth-upstart-bridge main process ended, respawning
[ 1.709352] init: plymouth-upstart-bridge main process (190) terminated with status 1
[ 1.709372] init: plymouth-upstart-bridge main process ended, respawning
[ 1.719512] init: plymouth-upstart-bridge main process (193) terminated with status 1
[ 1.719531] init: plymouth-upstart-bridge main process ended, respawning
[ 1.938916] Adding 3108860k swap on /dev/mapper/xubuntu--vg-swap_1. Priority:-1 extents:1 across:3108860k SSFS
[ 2.042320] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.153694] systemd-udevd[319]: starting version 204
[ 2.320990] lp: driver loaded but no devices found
[ 2.325972] psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
[ 2.344282] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 2.356102] ppdev: user-space parallel port driver
[ 2.372070] psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[ 2.386957] asus_laptop: Asus Laptop Support version 0.42
[ 2.387165] asus_laptop: K70IJ model detected
[ 2.408409] asus_laptop: Backlight controlled by ACPI video driver
[ 2.412049] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input12
[ 2.465965] [drm] Initialized drm 1.1.0 20060810
[ 2.508151] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input11
[ 2.564571] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 2.606038] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 2.746068] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.791880] [drm] Memory usable by graphics device = 2048M
[ 2.791888] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 2.791890] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 2.791919] Console: switching to colour dummy device 80x25
[ 2.832264] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 2.832399] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.832402] [drm] Driver supports precise vblank timestamp query.
[ 2.832480] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.963131] cfg80211: Calling CRDA to update world regulatory domain
[ 3.173755] Linux video capture interface: v2.00
[ 3.241636] ath: phy0: Enable LNA combining
[ 3.281370] random: nonblocking pool is initialized
[ 3.282034] ath: phy0: ASPM enabled: 0x42
[ 3.282037] ath: EEPROM regdomain: 0x60
[ 3.282038] ath: EEPROM indicates we should expect a direct regpair map
[ 3.282041] ath: Country alpha2 being used: 00
[ 3.282043] ath: Regpair used: 0x60
[ 3.289561] Bluetooth: Core ver 2.17
[ 3.289612] NET: Registered protocol family 31
[ 3.289615] Bluetooth: HCI device and connection manager initialized
[ 3.289624] Bluetooth: HCI socket layer initialized
[ 3.289628] Bluetooth: L2CAP socket layer initialized
[ 3.289634] Bluetooth: SCO socket layer initialized
[ 3.332153] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.332158] Bluetooth: BNEP filters: protocol multicast
[ 3.332169] Bluetooth: BNEP socket layer initialized
[ 3.355974] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 3.356534] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8560000, irq=17
[ 3.364219] Bluetooth: RFCOMM TTY layer initialized
[ 3.364233] Bluetooth: RFCOMM socket layer initialized
[ 3.364245] Bluetooth: RFCOMM ver 1.11
[ 3.405100] type=1400 audit(1475249573.078:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=518 comm="apparmor_parser"
[ 3.405110] type=1400 audit(1475249573.078:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=518 comm="apparmor_parser"
[ 3.405116] type=1400 audit(1475249573.078:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=518 comm="apparmor_parser"
[ 3.405750] type=1400 audit(1475249573.078:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=518 comm="apparmor_parser"
[ 3.405760] type=1400 audit(1475249573.078:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=518 comm="apparmor_parser"
[ 3.406080] type=1400 audit(1475249573.078:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=518 comm="apparmor_parser"
[ 3.410316] type=1400 audit(1475249573.082:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=517 comm="apparmor_parser"
[ 3.410325] type=1400 audit(1475249573.082:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=517 comm="apparmor_parser"
[ 3.410927] type=1400 audit(1475249573.082:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=517 comm="apparmor_parser"
[ 3.622440] uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M WebCam (064e:a116)
[ 3.644144] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
[ 3.657241] input: USB2.0 UVC 1.3M WebCam as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input13
[ 3.660530] usbcore: registered new interface driver uvcvideo
[ 3.660534] USB Video Class driver (1.1.1)
[ 3.775191] fbcon: inteldrmfb (fb0) is primary device
[ 4.128219] cfg80211: World regulatory domain updated:
[ 4.128220] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4.128222] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.128224] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.128225] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.128226] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.128227] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.432183] Console: switching to colour frame buffer device 200x56
[ 4.439447] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.439449] i915 0000:00:02.0: registered panic notifier
[ 4.459278] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 4.465199] acpi device:38: registered as cooling_device2
[ 4.466626] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input14
[ 4.468890] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.469064] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 4.469066] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.469071] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 4.469072] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.469075] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 4.469076] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.469077] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.469308] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 4.525438] autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:speaker
[ 4.525444] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.525446] hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 4.525447] mono: mono_out=0x0
[ 4.525449] inputs:
[ 4.525451] Internal Mic=0x1e
[ 4.525453] Mic=0x1a
[ 4.552277] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 4.552537] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 4.552779] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 4.914334] init: samba-ad-dc main process (723) terminated with status 1
[ 5.337706] init: failsafe main process (693) killed by TERM signal
[ 6.352952] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.356248] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.364266] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.364774] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.997614] audit_printk_skb: 6 callbacks suppressed
[ 6.997619] type=1400 audit(1475249576.670:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=992 comm="apparmor_parser"
[ 6.997629] type=1400 audit(1475249576.670:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=992 comm="apparmor_parser"
[ 6.997995] type=1400 audit(1475249576.670:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=992 comm="apparmor_parser"
[ 7.002515] type=1400 audit(1475249576.674:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=993 comm="apparmor_parser"
[ 7.002527] type=1400 audit(1475249576.674:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=993 comm="apparmor_parser"
[ 7.002534] type=1400 audit(1475249576.674:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=993 comm="apparmor_parser"
[ 7.003138] type=1400 audit(1475249576.674:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=993 comm="apparmor_parser"
[ 7.003145] type=1400 audit(1475249576.674:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=993 comm="apparmor_parser"
[ 7.003458] type=1400 audit(1475249576.674:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=993 comm="apparmor_parser"
[ 7.012985] type=1400 audit(1475249576.686:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=994 comm="apparmor_parser"
[ 7.469332] wlan0: authenticate with 7a:04:32:69:25:0c
[ 7.499309] wlan0: send auth to 7a:04:32:69:25:0c (try 1/3)
[ 7.504049] wlan0: authenticated
[ 7.512066] wlan0: associate with 7a:04:32:69:25:0c (try 1/3)
[ 7.521244] wlan0: RX AssocResp from 7a:04:32:69:25:0c (capab=0x411 status=0 aid=1)
[ 7.521310] wlan0: associated
[ 7.521372] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 8.356730] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000010) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 8.356741] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 8.356749] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 8.356758] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 8.685179] init: plymouth-upstart-bridge main process ended, respawning
[ 9.375129] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000010) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.375141] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.375150] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.375159] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.404389] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000015) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.404400] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.404409] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.404417] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.419697] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x00000001B) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.419709] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.419719] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.419729] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.434694] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x00000001B) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.434706] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.434715] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.434723] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.450212] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000021) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.450224] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.450233] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.450243] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.464669] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000027) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.464680] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.464689] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.464697] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.478484] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000027) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.478497] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.478506] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.478514] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.492806] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x00000002D) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.492816] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.492826] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.492834] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.507423] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000033) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.507436] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.507445] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.507453] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.522135] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000039) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.522147] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.522155] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.522163] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.584206] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000039) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.584216] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.584225] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.584233] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.585096] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x00000003F) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.585105] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.585113] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.585121] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.585866] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000045) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.585875] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.585882] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.585889] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.586546] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000045) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.586553] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.586560] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.586567] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.587192] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x00000004A) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.587200] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.587206] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.587213] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.595749] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000051) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.595760] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.595769] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.595777] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.609450] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000051) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.609462] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.609471] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.609479] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.623751] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000057) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.623764] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.623773] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.623781] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.638089] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x00000005D) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.638101] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.638110] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.638118] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 9.652398] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000064) is beyond end of object (length 0x10) (20131115/exoparg2-420)
[ 9.652409] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f702db28), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.652417] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7029cd8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
[ 9.652426] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[ 30.789045] ACPI Warning: _BQC returned an invalid level (20131115/video-678)
[ 444.359449] perf samples too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 2568.292552] perf samples too long (5006 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
merci
Dernière modification par degolarson (Le 30/09/2016, à 18:31)
2018-2020 Xubuntu 18.04 LTS 64b Nov 2020 Debian Buster Laptop Asus PRO79IJ-TY025E SSD 250Go RAM 2.9Go puis 4Go en sept2020 2 x Pentium (R) Dual-Core T4200 2GHz année 2009 LiveboxSosh
IntelMobile4SeriesGMA500, wifi Atheros 9285
Doucement, nous sommes pressés
Les jeunes sont ce qu'en font les vieux cons (Pierre Desproges )
Hors ligne