#1 Le 30/09/2016, à 14:32
- nilimo
[Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
Bonjour,
j'ai fait une mise à niveau de mon installation de Ubuntu 14.04 LTS à Ubuntu 16.04 LTS. Depuis à chaque démarage j'ai un message me signalant un espace insuffisant du repertoire Racine.
J'ai effectué le nettoyage selon les indications trouvées dans la documentation. Supression des anciens noyaux, fichiers temporaires, poubelle, ... je n'ai toujours que 0 octets de disponible.
Mon Pc est un
Asus X71Q 64 bits 3 Go RAM
Processeur: intel Pentium Dual CPU T3200 2.00GHz x 2
Carte graphique: Mobile intel GM45 Express Chipset
Disque: 320 Go
J'ai suivi la discussion de yoyo_et_yoyo concernant le même problème. J'ai donc suivi les premiers conseils de cqfd93 et j'ai lancé les commandes suivantes:
cat /etc/issue
uname -a
echo "${XDG_CURRENT_DESKTOP}"
df -h
df -i
dpkg -l | grep -Ei "linux-(g|h|i|lo|si|t)"
ls -l /boot | sort -rn -k5
gilles@altec:~$ cat /etc/issue
Ubuntu 16.04.1 LTS \n \l
gilles@altec:~$ gilles@altec:~$ uname -a
Linux altec 4.4.0-38-generic #57-Ubuntu SMP Tue Sep 6 15:42:33 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
gilles@altec:~$gilles@altec:~$ echo "${XDG_CURRENT_DESKTOP}"
GNOME-Flashback:Unity
gilles@altec:~$gilles@altec:~$ df -h
Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
udev 1,5G 0 1,5G 0% /dev
tmpfs 298M 5,2M 293M 2% /run
/dev/sda1 17G 16G 113M 100% /
tmpfs 1,5G 184K 1,5G 1% /dev/shm
tmpfs 5,0M 4,0K 5,0M 1% /run/lock
tmpfs 1,5G 0 1,5G 0% /sys/fs/cgroup
/dev/sda3 276G 33G 230G 13% /home
cgmfs 100K 0 100K 0% /run/cgmanager/fs
tmpfs 298M 68K 298M 1% /run/user/1000
gilles@altec:~$ gilles@altec:~$ df -i
Sys. de fichiers Inœuds IUtil. ILibre IUti% Monté sur
udev 375811 548 375263 1% /dev
tmpfs 380658 772 379886 1% /run
/dev/sda1 1099440 289950 809490 27% /
tmpfs 380658 7 380651 1% /dev/shm
tmpfs 380658 6 380652 1% /run/lock
tmpfs 380658 18 380640 1% /sys/fs/cgroup
/dev/sda3 18382848 52358 18330490 1% /home
cgmfs 380658 14 380644 1% /run/cgmanager/fs
tmpfs 380658 32 380626 1% /run/user/1000
gilles@altec:~$ gilles@altec:~$ dpkg -l | grep -Ei "linux-(g|h|i|lo|si|t)"
ii linux-generic 4.4.0.38.40 amd64 Complete Generic Linux kernel and headers
ii linux-headers-4.4.0-36 4.4.0-36.55 all Header files related to Linux kernel version 4.4.0
ii linux-headers-4.4.0-36-generic 4.4.0-36.55 amd64 Linux kernel headers for version 4.4.0 on 64 bit x86 SMP
ii linux-headers-4.4.0-38 4.4.0-38.57 all Header files related to Linux kernel version 4.4.0
ii linux-headers-4.4.0-38-generic 4.4.0-38.57 amd64 Linux kernel headers for version 4.4.0 on 64 bit x86 SMP
ii linux-headers-generic 4.4.0.38.40 amd64 Generic Linux kernel headers
ii linux-image-4.4.0-36-generic 4.4.0-36.55 amd64 Linux kernel image for version 4.4.0 on 64 bit x86 SMP
ii linux-image-4.4.0-38-generic 4.4.0-38.57 amd64 Linux kernel image for version 4.4.0 on 64 bit x86 SMP
ii linux-image-extra-4.4.0-36-generic 4.4.0-36.55 amd64 Linux kernel extra modules for version 4.4.0 on 64 bit x86 SMP
ii linux-image-extra-4.4.0-38-generic 4.4.0-38.57 amd64 Linux kernel extra modules for version 4.4.0 on 64 bit x86 SMP
ii linux-image-generic 4.4.0.38.40 amd64 Generic Linux kernel image
gilles@altec:~$ gilles@altec:~$ ls -l /boot | sort -rn -k5
-rw-r--r-- 1 root root 36165802 sept. 17 18:46 initrd.img-4.4.0-36-generic
-rw-r--r-- 1 root root 36164069 sept. 21 08:37 initrd.img-4.4.0-38-generic
-rw------- 1 root root 7051680 sept. 6 20:52 vmlinuz-4.4.0-38-generic
-rw------- 1 root root 7045472 août 11 21:58 vmlinuz-4.4.0-36-generic
-rw------- 1 root root 3869329 sept. 6 20:52 System.map-4.4.0-38-generic
-rw------- 1 root root 3867829 août 11 21:58 System.map-4.4.0-36-generic
-rw-r--r-- 1 root root 1242262 sept. 6 20:52 abi-4.4.0-38-generic
-rw-r--r-- 1 root root 1241960 août 11 21:58 abi-4.4.0-36-generic
-rw-r--r-- 1 root root 189732 sept. 6 20:52 config-4.4.0-38-generic
-rw-r--r-- 1 root root 189696 août 11 21:58 config-4.4.0-36-generic
-rw-r--r-- 1 root root 184840 janv. 28 2016 memtest86+_multiboot.bin
-rw-r--r-- 1 root root 184380 janv. 28 2016 memtest86+.elf
-rw-r--r-- 1 root root 182704 janv. 28 2016 memtest86+.bin
drwxr-xr-x 5 root root 4096 sept. 27 20:28 grub
total 95336
gilles@altec:~$ Merci pour ce que vous pourrez faire pour m'aider à résoudre ce problème.
PS: je suis novice en Forum et Ubuntu.
Dernière modification par nilimo (Le 03/10/2016, à 16:04)
Hors ligne
#2 Le 30/09/2016, à 14:43
- moko138
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
Lis les 2 1ers message du tutoriel dans ma signature.
Puis
sudo apt-get install ncdupuis donne le retour de
sudo ncdu -x /sans omettre de donner la dernière ligne "total".
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#3 Le 30/09/2016, à 14:49
- cqfd93
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
Bonjour,
Là au moins, on est sûr que ce n'est pas un problème de noyaux. @nilimo : pour un débutant en Forum et Ubuntu, tu as fait une entrée parfaite en expliquant ton problème, en recherchant sur le forum et en montrant ce que tu as tenté. Bravo ! Je te laisse entre les mains expertes de moko138 
− cqfd93 −
Hors ligne
#4 Le 30/09/2016, à 15:55
- nilimo
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
Merci cqfd93, c'est parce que tu sais rendre les choses simples.
Merci moko138, j'ai lu ton tutoriel sur ncdu. Il est intéressant et je m'en souviendrai.
Hors ligne
#5 Le 30/09/2016, à 16:07
- nilimo
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
Hum! il semble que l'image n'ai pas suivie!
Comment insére-t-on une copie d'écran dans le message?
Hors ligne
#6 Le 30/09/2016, à 16:18
- nilimo
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
Hors ligne
#7 Le 30/09/2016, à 16:21
- nilimo
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
ncdu 1.11 ~ Use the arrow keys to navigate, press ? for help
--- / ------------------------------------------------------------------------
9,4 GiB [##########] /var
5,0 GiB [##### ] /usr
596,9 MiB [ ] /lib
198,4 MiB [ ] /etc
100,3 MiB [ ] /boot
17,9 MiB [ ] /root
12,8 MiB [ ] /sbin
12,6 MiB [ ] /bin
56,0 KiB [ ] /tmp
e 16,0 KiB [ ] /lost+found
8,0 KiB [ ] /media
4,0 KiB [ ] /lib64
e 4,0 KiB [ ] /srv
e 4,0 KiB [ ] /snap
e 4,0 KiB [ ] /mnt
e 4,0 KiB [ ] /cdrom
@ 0,0 B [ ] initrd.img.old
@ 0,0 B [ ] initrd.img
@ 0,0 B [ ] vmlinuz.old
@ 0,0 B [ ] vmlinuz
> 0,0 B [ ] /sys
> 0,0 B [ ] /run
> 0,0 B [ ] /proc
> 0,0 B [ ] /home
> 0,0 B [ ] /dev
Total disk usage: 15,4 GiB Apparent size: 15,3 GiB Items: 289762 Hors ligne
#8 Le 30/09/2016, à 16:43
- moko138
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
Pas question d'image : le terminal c'est du texte, à copier coller.
Le retour chez moi donne ceci :
--- / --------------------------------
2,6GiB [##########] /usr
428,7MiB [# ] /lib
319,1MiB [# ] /var
62,4MiB [ ] /boot
59,1MiB [ ] /home
14,3MiB [ ] /sbin
9,2MiB [ ] /bin
9,1MiB [ ] /etc
(...)
Total disk usage: 3,5GiB Apparent size: 3,4GiB Items: 167759 - -
Tu peux supprimer les lignes inférieures à 5 ou 10 Mio, qui ne sont pas pertinentes dans ton cas. Mais donne bien les premières et la dernière.
- -
L'image, c'est lourd donc c'est de la pollution énergétique (transfert, stockage, re-transferts).
En plus elle ne permet pas le copier-coller facile, genre :
3,6GiB [ ] /boot Ni l'ajout de commentaires comme ceci :
3,6GiB [ ] /boot <-- # Là, il y a un gros gaspillage d'espace.- -
Aaah tu y es !
Le souci est là :
9,4 GiB [##########] /var
5,0 GiB [##### ] /usrLaisse cet onglet ouvert, et dans un autre onglet du terminal fais
sudo apt-get clean; sudo apt-get autoremove(ça peut prendre un certain temps)
puis
reviens à l'onglet où ncdu est lancé,
et tapes-y un r pour actualiser,
et enfin
donne les 2 lignes actualisées de /var et de /usr.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#9 Le 30/09/2016, à 17:05
- erresse
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
Hello,
Méfiance !
Une taille de 9,5Go dans /var, ça peut aussi être le signe d'un fichier log fou qui a grossi et qui remplit l'espace. À vérifier en plus des archives de /var/apt...
Plus de 50 ans d'informatique, ça en fait des lignes de commandes en console, mais on n'avait pas le choix...
Excellente raison pour, aujourd'hui qu'on le peut, utiliser au maximum les INTERFACES GRAPHIQUES !
Important : Une fois résolu, pensez à clore votre sujet en ajoutant [Résolu] devant le titre du 1er message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.
Hors ligne
#10 Le 30/09/2016, à 17:23
- moko138
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
Bien sûr, erresse !
Mais ça aussi, on le verra dans l'onglet de ncdu.
J'applique la règle "une chose à la fois".
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#11 Le 30/09/2016, à 18:17
- nilimo
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
Pour moko138, j'ai fais "sudo apt-get clean; sudo apt-get autoremove" et j'ai fais à nouveau "sudo ncdu -x /" j'obtiens le résultat suivant:
ncdu 1.11 ~ Use the arrow keys to navigate, press ? for help
--- / ------------------------------------------------------------------------
9,5 GiB [##########] /var
5,0 GiB [##### ] /usr
596,9 MiB [ ] /lib
198,4 MiB [ ] /etc
100,3 MiB [ ] /boot
17,9 MiB [ ] /root
12,8 MiB [ ] /sbin
12,6 MiB [ ] /bin
56,0 KiB [ ] /tmp
e 16,0 KiB [ ] /lost+found
8,0 KiB [ ] /media
4,0 KiB [ ] /lib64
e 4,0 KiB [ ] /srv
e 4,0 KiB [ ] /snap
e 4,0 KiB [ ] /mnt
e 4,0 KiB [ ] /cdrom
@ 0,0 B [ ] initrd.img.old
@ 0,0 B [ ] initrd.img
@ 0,0 B [ ] vmlinuz.old
@ 0,0 B [ ] vmlinuz
> 0,0 B [ ] /sys
> 0,0 B [ ] /run
> 0,0 B [ ] /proc
> 0,0 B [ ] /home
> 0,0 B [ ] /dev
Total disk usage: 15,5 GiB Apparent size: 15,4 GiB Items: 289760 Puis j'ai regardé ce qu'il y avait dans var:
ncdu 1.11 ~ Use the arrow keys to navigate, press ? for help
--- /var ---------------------------------------------------------------------
/..
8,9 GiB [##########] /log
356,9 MiB [ ] /lib
191,9 MiB [ ] /cache
24,5 MiB [ ] /crash
23,6 MiB [ ] /tmp
7,1 MiB [ ] /backups
2,0 MiB [ ] /spool
e 4,0 KiB [ ] /snap
e 4,0 KiB [ ] /opt
e 4,0 KiB [ ] /metrics
e 4,0 KiB [ ] /mail
e 4,0 KiB [ ] /local
@ 0,0 B [ ] lock
@ 0,0 B [ ] run
Total disk usage: 9,5 GiB Apparent size: 9,5 GiB Items: 15244 Enfin j'ai regardé dans log:
ncdu 1.11 ~ Use the arrow keys to navigate, press ? for help
--- /var/log -------------------------------------------------------------------
/..
4,3 GiB [##########] kern.log.1
3,7 GiB [######## ] kern.log
588,3 MiB [# ] syslog.1
114,2 MiB [ ] kern.log.2.gz
102,2 MiB [ ] syslog.5.gz
67,9 MiB [ ] syslog.3.gz
56,9 MiB [ ] syslog
15,2 MiB [ ] syslog.7.gz
6,6 MiB [ ] syslog.2.gz
3,6 MiB [ ] syslog.4.gz
3,0 MiB [ ] /dist-upgrade
2,6 MiB [ ] dpkg.log
1,2 MiB [ ] /installer
680,0 KiB [ ] pm-suspend.log.1
604,0 KiB [ ] /upstart
480,0 KiB [ ] syslog.6.gz
468,0 KiB [ ] pm-suspend.log
444,0 KiB [ ] pm-powersave.log.1
328,0 KiB [ ] udev
284,0 KiB [ ] pm-powersave.log
216,0 KiB [ ] wtmp.1
200,0 KiB [ ] /apt
180,0 KiB [ ] wtmp
164,0 KiB [ ] /lightdm
148,0 KiB [ ] kern.log.3.gz
100,0 KiB [ ] dpkg.log.1
96,0 KiB [ ] /cups
80,0 KiB [ ] kern.log.4.gz
76,0 KiB [ ] Xorg.failsafe.log
64,0 KiB [ ] dmesg.0
64,0 KiB [ ] bootstrap.log
60,0 KiB [ ] dmesg
44,0 KiB [ ] lastlog
44,0 KiB [ ] alternatives.log
36,0 KiB [ ] Xorg.1.log.old
36,0 KiB [ ] auth.log.1
28,0 KiB [ ] Xorg.3.log
28,0 KiB [ ] Xorg.2.log.old
28,0 KiB [ ] Xorg.4.log
28,0 KiB [ ] Xorg.3.log.old
28,0 KiB [ ] Xorg.2.log
28,0 KiB [ ] auth.log
24,0 KiB [ ] Xorg.1.log
24,0 KiB [ ] Xorg.0.log.old
24,0 KiB [ ] Xorg.0.log
20,0 KiB [ ] pm-suspend.log.4.gz
20,0 KiB [ ] dmesg.1.gz
20,0 KiB [ ] dmesg.2.gz
20,0 KiB [ ] dmesg.3.gz
20,0 KiB [ ] dmesg.4.gz
20,0 KiB [ ] dpkg.log.7.gz
16,0 KiB [ ] pm-suspend.log.3.gz
12,0 KiB [ ] faillog
12,0 KiB [ ] /ConsoleKit
12,0 KiB [ ] dpkg.log.9.gz
12,0 KiB [ ] dpkg.log.4.gz
12,0 KiB [ ] pm-suspend.log.2.gz
12,0 KiB [ ] dpkg.log.12.gz
12,0 KiB [ ] dpkg.log.11.gz
12,0 KiB [ ] /fsck
8,0 KiB [ ] /hp
8,0 KiB [ ] dpkg.log.10.gz
8,0 KiB [ ] dpkg.log.8.gz
8,0 KiB [ ] dpkg.log.2.gz
8,0 KiB [ ] dpkg.log.6.gz
8,0 KiB [ ] dpkg.log.5.gz
8,0 KiB [ ] auth.log.2.gz
8,0 KiB [ ] fontconfig.log
8,0 KiB [ ] pm-powersave.log.4.gz
4,0 KiB [ ] /unattended-upgrades
e 4,0 KiB [ ] /speech-dispatcher
e 4,0 KiB [ ] /samba
4,0 KiB [ ] boot.log
4,0 KiB [ ] auth.log.3.gz
4,0 KiB [ ] dpkg.log.3.gz
4,0 KiB [ ] pm-powersave.log.3.gz
4,0 KiB [ ] pm-powersave.log.2.gz
4,0 KiB [ ] auth.log.4.gz
4,0 KiB [ ] gpu-manager.log
4,0 KiB [ ] alternatives.log.1
4,0 KiB [ ] alternatives.log.9.gz
4,0 KiB [ ] alternatives.log.8.gz
4,0 KiB [ ] alternatives.log.3.gz
4,0 KiB [ ] apport.log.1
4,0 KiB [ ] alternatives.log.11.gz
4,0 KiB [ ] alternatives.log.7.gz
4,0 KiB [ ] btmp.1
4,0 KiB [ ] apport.log.3.gz
4,0 KiB [ ] alternatives.log.4.gz
4,0 KiB [ ] apport.log.6.gz
4,0 KiB [ ] alternatives.log.12.gz
4,0 KiB [ ] alternatives.log.6.gz
4,0 KiB [ ] apport.log.4.gz
4,0 KiB [ ] alternatives.log.5.gz
4,0 KiB [ ] apport.log.5.gz
4,0 KiB [ ] apport.log.7.gz
4,0 KiB [ ] apport.log.2.gz
4,0 KiB [ ] alternatives.log.10.gz
4,0 KiB [ ] alternatives.log.2.gz
0,0 B [ ] btmp
0,0 B [ ] apport.log
Total disk usage: 8,9 GiB Apparent size: 8,9 GiB Items: 361 Ce qui confirme l'interrogation de erresse, gros fichier log.
Qu'est-ce que ces fichiers log?
Hors ligne
#12 Le 30/09/2016, à 19:03
- moko138
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
Les logs enregistrent l'activité du système.
Ils sont donc très utiles pour détecter ce qui va de travers !
Donne
cat /var/log/kern.log.1 | head -n 10cat /var/log/kern.log | tail -n 50et
cat /var/log/syslog | tail -n 50/!\ Ne cherche pas à retaper les commandes, tu les copies-colles.
Tu pourras supprimer juste après kern.log.1 qui ne nous servira plus. Ça libérera déjà 4,3 Gio !
sudo rm /var/log/kern.log.1%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#13 Le 30/09/2016, à 19:12
- moko138
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
Plusieurs choses peuvent enfler monstrueusement un log.
Les premières idées qui me reviennent sont
- un lecteur de cartes que le système teste sans arrêt, comme s'il venait d'être branché ;
- un lecteur multimedia (cas d'audacious, au moins dans sa version pour *buntu 12.04) qui panique quand il y a une voyelle accentuée dans le tag d'un fichier ;
- un mauvais réglage du système sur la carte wifi ;
- et les possibilités sont innombrables, mais tes logs vont nous renseigner.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#14 Le 30/09/2016, à 19:16
- nilimo
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
Voilà le résultat des 3 premières commandes. Je vais maintenant supprimer le fichier kern.log.1.
gilles@altec:~$ cat /var/log/kern.log.1 | head -n 10
Sep 19 10:46:20 altec kernel: [ 748.724082] usb 2-3: new high-speed USB device number 5 using ehci-pci
Sep 19 10:46:21 altec kernel: [ 748.860818] usb 2-3: New USB device found, idVendor=04b8, idProduct=0819
Sep 19 10:46:21 altec kernel: [ 748.860823] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Sep 19 10:46:21 altec kernel: [ 748.860827] usb 2-3: Product: USB2.0 MFP(Hi-Speed)
Sep 19 10:46:21 altec kernel: [ 748.860830] usb 2-3: Manufacturer: EPSON
Sep 19 10:46:21 altec kernel: [ 748.860832] usb 2-3: SerialNumber: 001000601111434240
Sep 19 10:46:21 altec kernel: [ 748.866139] usb-storage 2-3:1.2: USB Mass Storage device detected
Sep 19 10:46:21 altec kernel: [ 748.866361] scsi host5: usb-storage 2-3:1.2
Sep 19 10:46:21 altec kernel: [ 748.991646] usblp 2-3:1.1: usblp1: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0819
Sep 19 10:46:21 altec kernel: [ 748.991703] usbcore: registered new interface driver usblp
gilles@altec:~$ gilles@altec:~$ cat /var/log/kern.log | tail -n 50
Sep 30 17:52:30 altec kernel: [14153.997858] [<ffffffff818311c2>] common_interrupt+0x82/0x82
Sep 30 17:52:30 altec kernel: [14153.997859] <EOI> [<ffffffffc001f2dd>] ? drm_poll+0x3d/0x50 [drm]
Sep 30 17:52:30 altec kernel: [14153.997900] [<ffffffff812224a3>] do_select+0x383/0x810
Sep 30 17:52:30 altec kernel: [14153.997904] [<ffffffff81221ef0>] ? poll_select_copy_remaining+0x140/0x140
Sep 30 17:52:30 altec kernel: [14153.997907] [<ffffffff81221ef0>] ? poll_select_copy_remaining+0x140/0x140
Sep 30 17:52:30 altec kernel: [14153.997909] [<ffffffff81221ef0>] ? poll_select_copy_remaining+0x140/0x140
Sep 30 17:52:30 altec kernel: [14153.997912] [<ffffffff81221ef0>] ? poll_select_copy_remaining+0x140/0x140
Sep 30 17:52:30 altec kernel: [14153.997915] [<ffffffff81221ef0>] ? poll_select_copy_remaining+0x140/0x140
Sep 30 17:52:30 altec kernel: [14153.997918] [<ffffffff81221ef0>] ? poll_select_copy_remaining+0x140/0x140
Sep 30 17:52:30 altec kernel: [14153.997920] [<ffffffff81221ef0>] ? poll_select_copy_remaining+0x140/0x140
Sep 30 17:52:30 altec kernel: [14153.997923] [<ffffffff81221ef0>] ? poll_select_copy_remaining+0x140/0x140
Sep 30 17:52:30 altec kernel: [14153.997926] [<ffffffff81221ef0>] ? poll_select_copy_remaining+0x140/0x140
Sep 30 17:52:30 altec kernel: [14153.997929] [<ffffffff81222aff>] core_sys_select+0x1cf/0x2f0
Sep 30 17:52:30 altec kernel: [14153.997934] [<ffffffff8120db36>] ? do_readv_writev+0x146/0x230
Sep 30 17:52:30 altec kernel: [14153.997938] [<ffffffff813fa9f9>] ? timerqueue_add+0x59/0xb0
Sep 30 17:52:30 altec kernel: [14153.997940] [<ffffffff813faa94>] ? timerqueue_del+0x24/0x70
Sep 30 17:52:30 altec kernel: [14153.997944] [<ffffffff810ef29c>] ? __remove_hrtimer+0x3c/0x90
Sep 30 17:52:30 altec kernel: [14153.997946] [<ffffffff810ef3c1>] ? hrtimer_try_to_cancel+0xd1/0x130
Sep 30 17:52:30 altec kernel: [14153.997950] [<ffffffff810f4b6a>] ? ktime_get_ts64+0x4a/0xf0
Sep 30 17:52:30 altec kernel: [14153.997952] [<ffffffff81222cda>] SyS_select+0xba/0x110
Sep 30 17:52:30 altec kernel: [14153.997955] [<ffffffff818306f2>] entry_SYSCALL_64_fastpath+0x16/0x71
Sep 30 17:52:30 altec kernel: [14153.997958] ---[ end trace dc117a0cd716e003 ]---
Sep 30 17:52:30 altec kernel: [14153.998715] r592: IRQ: card added
Sep 30 17:52:30 altec kernel: [14153.998720] r592: IRQ: DMA error
Sep 30 17:52:30 altec kernel: [14153.998729] ------------[ cut here ]------------
Sep 30 17:52:30 altec kernel: [14153.998738] WARNING: CPU: 0 PID: 898 at /build/linux-R0TiM8/linux-4.4.0/drivers/mtd/nand/r852.c:752 r852_irq+0x1b1/0x220 [r852]()
Sep 30 17:52:30 altec kernel: [14153.998740] Modules linked in: drbg ansi_cprng ctr ccm uvcvideo arc4 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common videodev media ath9k snd_hda_codec_hdmi r852 ath9k_common snd_hda_codec_realtek ath9k_hw snd_hda_codec_generic snd_hda_intel sm_common snd_hda_codec nand ath snd_hda_core coretemp nand_ecc snd_hwdep mac80211 nand_bch bch nand_ids joydev mtd input_leds snd_pcm r592 serio_raw cfg80211 lpc_ich snd_seq_midi memstick snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer snd asus_laptop soundcore sparse_keymap input_polldev shpchp mac_hid parport_pc ppdev lp parport autofs4 hid_logitech_hidpp hid_logitech_dj usbhid hid i915 i2c_algo_bit psmouse firewire_ohci drm_kms_helper sdhci_pci sdhci firewire_core pata_acpi crc_itu_t syscopyarea r8169 sysfillrect sysimgblt mii fb_sys_fops drm fjes video
Sep 30 17:52:30 altec kernel: [14153.998817] CPU: 0 PID: 898 Comm: Xorg Tainted: G W 4.4.0-38-generic #57-Ubuntu
Sep 30 17:52:30 altec kernel: [14153.998819] Hardware name: ASUSTeK Computer Inc. X71Q /X71Q , BIOS 205 06/05/2009
Sep 30 17:52:30 altec kernel: [14153.998822] 0000000000003086 00000000415a3f24 ffff8800bd803e40 ffffffff813f1b73
Sep 30 17:52:30 altec kernel: [14153.998826] 0000000000000000 ffffffffc05560c8 ffff8800bd803e78 ffffffff810811c2
Sep 30 17:52:30 altec kernel: [14153.998829] ffff8800b517c800 0000000000000001 ffff8800b517c90c 0000000000003086
Sep 30 17:52:30 altec kernel: [14153.998833] Call Trace:
Sep 30 17:52:30 altec kernel: [14153.998835] <IRQ> [<ffffffff813f1b73>] dump_stack+0x63/0x90
Sep 30 17:52:30 altec kernel: [14153.998847] [<ffffffff810811c2>] warn_slowpath_common+0x82/0xc0
Sep 30 17:52:30 altec kernel: [14153.998850] [<ffffffff8108130a>] warn_slowpath_null+0x1a/0x20
Sep 30 17:52:30 altec kernel: [14153.998853] [<ffffffffc0554a51>] r852_irq+0x1b1/0x220 [r852]
Sep 30 17:52:30 altec kernel: [14153.998857] [<ffffffff810dac9d>] handle_irq_event_percpu+0x8d/0x1d0
Sep 30 17:52:30 altec kernel: [14153.998859] [<ffffffff810dae1e>] handle_irq_event+0x3e/0x60
Sep 30 17:52:30 altec kernel: [14153.998862] [<ffffffff810de056>] handle_fasteoi_irq+0x96/0x150
Sep 30 17:52:30 altec kernel: [14153.998866] [<ffffffff810310fa>] handle_irq+0x1a/0x30
Sep 30 17:52:30 altec kernel: [14153.998871] [<ffffffff818330db>] do_IRQ+0x4b/0xd0
Sep 30 17:52:30 altec kernel: [14153.998875] [<ffffffff818311c2>] common_interrupt+0x82/0x82
Sep 30 17:52:30 altec kernel: [14153.998877] <EOI>
Sep 30 17:52:30 altec kernel: [14153.998879] ---[ end trace dc117a0cd716e004 ]---
Sep 30 17:52:30 altec kernel: [14154.097005] r592: IRQ: card added
Sep 30 17:52:30 altec kernel: [14154.097013] r592: IRQ: DMA error
Sep 30 17:52:30 altec kernel: [14154.097028] ------------[ cut here ]------------
Sep 30 17:52:30 altec kernel: [14154.097039] WARNING: CPU: 0 PID: 6171 at /build/linux-R0TiM8/linux-4.4.0/drivers/mtd/nand/r852.c:752 r852_irq+0x1b1/0x220 [r852]()
Sep 30 17:52:30 altec kernel: [14154.097041] Modules linked in: drbg ansi_cprng ctr ccm uvcvideo arc4 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common videodev media ath9k snd_hda_codec_hdmi r852 ath9k_common snd_hda_codec_realtek ath9k_hw snd_hda_codec_generic snd_hda_intel sm_common snd_hda_codec nand ath snd_hda_core coretemp nand_ecc snd_hwdep mac80211 nand_bch bch nand_ids joydev mtd input_leds snd_pcm r592 serio_raw cfg80211 lpc_ich snd_seq_midi memstick snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer snd asus_laptop soundcore sparse_keymap input_polldev shpchp mac_hid parport_pc pgilles@altec:~$ gilles@altec:~$ cat /var/log/syslog | tail -n 50
Sep 30 17:52:30 altec kernel: [14153.997858] [<ffffffff818311c2>] common_interrupt+0x82/0x82
Sep 30 17:52:30 altec kernel: [14153.997859] <EOI> [<ffffffffc001f2dd>] ? drm_poll+0x3d/0x50 [drm]
Sep 30 17:52:30 altec kernel: [14153.997900] [<ffffffff812224a3>] do_select+0x383/0x810
Sep 30 17:52:30 altec kernel: [14153.997904] [<ffffffff81221ef0>] ? poll_select_copy_remaining+0x140/0x140
Sep 30 17:52:30 altec kernel: [14153.997907] [<ffffffff81221ef0>] ? poll_select_copy_remaining+0x140/0x140
Sep 30 17:52:30 altec kernel: [14153.997909] [<ffffffff81221ef0>] ? poll_select_copy_remaining+0x140/0x140
Sep 30 17:52:30 altec kernel: [14153.997912] [<ffffffff81221ef0>] ? poll_select_copy_remaining+0x140/0x140
Sep 30 17:52:30 altec kernel: [14153.997915] [<ffffffff81221ef0>] ? poll_select_copy_remaining+0x140/0x140
Sep 30 17:52:30 altec kernel: [14153.997918] [<ffffffff81221ef0>] ? poll_select_copy_remaining+0x140/0x140
Sep 30 17:52:30 altec kernel: [14153.997920] [<ffffffff81221ef0>] ? poll_select_copy_remaining+0x140/0x140
Sep 30 17:52:30 altec kernel: [14153.997923] [<ffffffff81221ef0>] ? poll_select_copy_remaining+0x140/0x140
Sep 30 17:52:30 altec kernel: [14153.997926] [<ffffffff81221ef0>] ? poll_select_copy_remaining+0x140/0x140
Sep 30 17:52:30 altec kernel: [14153.997929] [<ffffffff81222aff>] core_sys_select+0x1cf/0x2f0
Sep 30 17:52:30 altec kernel: [14153.997934] [<ffffffff8120db36>] ? do_readv_writev+0x146/0x230
Sep 30 17:52:30 altec kernel: [14153.997938] [<ffffffff813fa9f9>] ? timerqueue_add+0x59/0xb0
Sep 30 17:52:30 altec kernel: [14153.997940] [<ffffffff813faa94>] ? timerqueue_del+0x24/0x70
Sep 30 17:52:30 altec kernel: [14153.997944] [<ffffffff810ef29c>] ? __remove_hrtimer+0x3c/0x90
Sep 30 17:52:30 altec kernel: [14153.997946] [<ffffffff810ef3c1>] ? hrtimer_try_to_cancel+0xd1/0x130
Sep 30 17:52:30 altec kernel: [14153.997950] [<ffffffff810f4b6a>] ? ktime_get_ts64+0x4a/0xf0
Sep 30 17:52:30 altec kernel: [14153.997952] [<ffffffff81222cda>] SyS_select+0xba/0x110
Sep 30 17:52:30 altec kernel: [14153.997955] [<ffffffff818306f2>] entry_SYSCALL_64_fastpath+0x16/0x71
Sep 30 17:52:30 altec kernel: [14153.997958] ---[ end trace dc117a0cd716e003 ]---
Sep 30 17:52:30 altec kernel: [14153.998715] r592: IRQ: card added
Sep 30 17:52:30 altec kernel: [14153.998720] r592: IRQ: DMA error
Sep 30 17:52:30 altec kernel: [14153.998729] ------------[ cut here ]------------
Sep 30 17:52:30 altec kernel: [14153.998738] WARNING: CPU: 0 PID: 898 at /build/linux-R0TiM8/linux-4.4.0/drivers/mtd/nand/r852.c:752 r852_irq+0x1b1/0x220 [r852]()
Sep 30 17:52:30 altec kernel: [14153.998740] Modules linked in: drbg ansi_cprng ctr ccm uvcvideo arc4 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common videodev media ath9k snd_hda_codec_hdmi r852 ath9k_common snd_hda_codec_realtek ath9k_hw snd_hda_codec_generic snd_hda_intel sm_common snd_hda_codec nand ath snd_hda_core coretemp nand_ecc snd_hwdep mac80211 nand_bch bch nand_ids joydev mtd input_leds snd_pcm r592 serio_raw cfg80211 lpc_ich snd_seq_midi memstick snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer snd asus_laptop soundcore sparse_keymap input_polldev shpchp mac_hid parport_pc ppdev lp parport autofs4 hid_logitech_hidpp hid_logitech_dj usbhid hid i915 i2c_algo_bit psmouse firewire_ohci drm_kms_helper sdhci_pci sdhci firewire_core pata_acpi crc_itu_t syscopyarea r8169 sysfillrect sysimgblt mii fb_sys_fops drm fjes video
Sep 30 17:52:30 altec kernel: [14153.998817] CPU: 0 PID: 898 Comm: Xorg Tainted: G W 4.4.0-38-generic #57-Ubuntu
Sep 30 17:52:30 altec kernel: [14153.998819] Hardware name: ASUSTeK Computer Inc. X71Q /X71Q , BIOS 205 06/05/2009
Sep 30 17:52:30 altec kernel: [14153.998822] 0000000000003086 00000000415a3f24 ffff8800bd803e40 ffffffff813f1b73
Sep 30 17:52:30 altec kernel: [14153.998826] 0000000000000000 ffffffffc05560c8 ffff8800bd803e78 ffffffff810811c2
Sep 30 17:52:30 altec kernel: [14153.998829] ffff8800b517c800 0000000000000001 ffff8800b517c90c 0000000000003086
Sep 30 17:52:30 altec kernel: [14153.998833] Call Trace:
Sep 30 17:52:30 altec kernel: [14153.998835] <IRQ> [<ffffffff813f1b73>] dump_stack+0x63/0x90
Sep 30 17:52:30 altec kernel: [14153.998847] [<ffffffff810811c2>] warn_slowpath_common+0x82/0xc0
Sep 30 17:52:30 altec kernel: [14153.998850] [<ffffffff8108130a>] warn_slowpath_null+0x1a/0x20
Sep 30 17:52:30 altec kernel: [14153.998853] [<ffffffffc0554a51>] r852_irq+0x1b1/0x220 [r852]
Sep 30 17:52:30 altec kernel: [14153.998857] [<ffffffff810dac9d>] handle_irq_event_percpu+0x8d/0x1d0
Sep 30 17:52:30 altec kernel: [14153.998859] [<ffffffff810dae1e>] handle_irq_event+0x3e/0x60
Sep 30 17:52:30 altec kernel: [14153.998862] [<ffffffff810de056>] handle_fasteoi_irq+0x96/0x150
Sep 30 17:52:30 altec kernel: [14153.998866] [<ffffffff810310fa>] handle_irq+0x1a/0x30
Sep 30 17:52:30 altec kernel: [14153.998871] [<ffffffff818330db>] do_IRQ+0x4b/0xd0
Sep 30 17:52:30 altec kernel: [14153.998875] [<ffffffff818311c2>] common_interrupt+0x82/0x82
Sep 30 17:52:30 altec kernel: [14153.998877] <EOI>
Sep 30 17:52:30 altec kernel: [14153.998879] ---[ end trace dc117a0cd716e004 ]---
Sep 30 17:52:30 altec kernel: [14154.097005] r592: IRQ: card added
Sep 30 17:52:30 altec kernel: [14154.097013] r592: IRQ: DMA error
Sep 30 17:52:30 altec kernel: [14154.097028] ------------[ cut here ]------------
Sep 30 17:52:30 altec kernel: [14154.097039] WARNING: CPU: 0 PID: 6171 at /build/linux-R0TiM8/linux-4.4.0/drivers/mtd/nand/r852.c:752 r852_irq+0x1b1/0x220 [r852]()
Sep 30 17:52:30 altec kernel: [14154.097041] Modules linked in: drbg ansi_cprng ctr ccm uvcvideo arc4 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common videodev media ath9k snd_hda_codec_hdmi r852 ath9k_common snd_hda_codec_realtek ath9k_hw snd_hda_codec_generic snd_hda_intel sm_common snd_hda_codec nand ath snd_hda_core coretemp nand_ecc snd_hwdep mac80211 nand_bch bch nand_ids joydev mtd input_leds snd_pcm r592 serio_raw cfg80211 lpc_ich snd_seq_midi memstick snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer snd asus_laptop soundcore sparse_keymap input_polldev shpchp mac_hid parport_pc pgilles@altec:~$ Hors ligne
#15 Le 30/09/2016, à 20:13
- moko138
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
Problème moins courant (gestion de la mémoire et des IRQ : option à changer dans le bios, peut-être ?)
Sep 30 17:52:30 altec kernel: [14154.097039] WARNING: CPU: 0 PID: 6171 at /build/linux-R0TiM8/linux-4.4.0/drivers/mtd/nand/r852.c:752 r852_irq+0x1b1/0x220 [r852]()
Confirmes-tu que tu as un SSD ?
Bizarre aussi, qu'il y ait eu une seule rotation de kern.log entre le 19 et le 30 septembre.
(Les logs en effet changent de nom au fil des jours :
xxx.log devient xxx.log.1 pendant qu'un nouveau xxx.log est créé,
et le dernier de la liste est supprimé.
Ce qui limite le nombre de logs, tout en conservant la trace sur plusieurs jours ou semaines).
Pendant que je cherche sur la toile, peux-tu ouvrir un autre onglet et donner
cat /var/log/dmesg | head -n 800s'il te plaît ? (oui, les 800 1ères lignes ! )
Dernière modification par moko138 (Le 30/09/2016, à 20:13)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#16 Le 30/09/2016, à 21:14
- nilimo
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
Comment puis-je savoir si j'ai un SSD?
Voici les 800 lignes, bon courage.
gilles@altec:~$ cat /var/log/dmesg | head -n 800
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-95-generic (buildd@lgw01-58) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #142-Ubuntu SMP Fri Aug 12 17:00:09 UTC 2016 (Ubuntu 3.13.0-95.142-generic 3.13.11-ckt39)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-95-generic root=UUID=69696353-646f-4a5a-a465-9f4b43cb2f1c ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e1000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdd7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bdd80000-0x00000000bdd8efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdd8f000-0x00000000bdddffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bdde0000-0x00000000bddfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: ASUSTeK Computer Inc. X71Q /X71Q , BIOS 205 06/05/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0xbdd80 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BDE00000 mask FFFE00000 uncachable
[ 0.000000] 3 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3038MB, range: 2MB, type UC
[ 0.000000] reg 3, base: 3040MB, range: 32MB, type UC
[ 0.000000] total RAM covered: 3038M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3038MB, range: 2MB, type UC
[ 0.000000] reg 3, base: 3040MB, range: 32MB, type UC
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbda00000-0xbdbfffff]
[ 0.000000] [mem 0xbda00000-0xbdbfffff] page 2M
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbc000000-0xbd9fffff]
[ 0.000000] [mem 0xbc000000-0xbd9fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x80000000-0xbbffffff]
[ 0.000000] [mem 0x80000000-0xbbffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0xbdc00000-0xbdd7ffff]
[ 0.000000] [mem 0xbdc00000-0xbdd7ffff] page 4k
[ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35b44000-0x36d99fff]
[ 0.000000] ACPI: RSDP 00000000000f9410 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bdd80100 000084 (v01 _ASUS_ Notebook 20090605 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bdd80290 0000F4 (v03 060509 FACP1351 20090605 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bdd80680 00CAD3 (v01 X71QX X71QX205 00000205 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bdd8f000 000040
[ 0.000000] ACPI: APIC 00000000bdd80390 00005C (v01 060509 APIC1351 20090605 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bdd80430 00003C (v01 060509 OEMMCFG 20090605 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000bdd80470 000176 (v01 _ASUS_ Notebook 20090605 MSFT 00000097)
[ 0.000000] ACPI: ECDT 00000000bdd80620 000054 (v01 060509 OEMECDT 20090605 MSFT 00000097)
[ 0.000000] ACPI: DBGP 00000000bdd803f0 000034 (v01 060509 DBGP1351 20090605 MSFT 00000097)
[ 0.000000] ACPI: BOOT 00000000bdd805f0 000028 (v01 060509 BOOT1351 20090605 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bdd8f040 000071 (v01 060509 OEMB1351 20090605 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bdd8d160 000038 (v01 060509 OEMHPET 20090605 MSFT 00000097)
[ 0.000000] ACPI: GSCI 00000000bdd8f0c0 002024 (v01 060509 GMCHSCI 20090605 MSFT 00000097)
[ 0.000000] ACPI: ATKG 00000000bdd912f0 008024 (v01 022008 OEMATKG 20080220 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bdd99e40 0004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bdd7ffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0xbdd7ffff]
[ 0.000000] NODE_DATA [mem 0xbdd7b000-0xbdd7ffff]
[ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800ba200000-ffff8800bd1fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbdd7ffff]
[ 0.000000] On node 0 totalpages: 777502
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12086 pages used for memmap
[ 0.000000] DMA32 zone: 773504 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e1000-0x000fffff]
[ 0.000000] e820: [mem 0xc0000000-0xfed1ffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8800bd800000 s81536 r8192 d20864 u1048576
[ 0.000000] pcpu-alloc: s81536 r8192 d20864 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 765331
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-95-generic root=UUID=69696353-646f-4a5a-a465-9f4b43cb2f1c ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3025220K/3110008K available (7419K kernel code, 1146K rwdata, 3416K rodata, 1336K init, 1448K bss, 84788K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-1.
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 12582912 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1994.972 MHz processor
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.94 BogoMIPS (lpj=7979888)
[ 0.004008] pid_max: default: 32768 minimum: 301
[ 0.004055] Security Framework initialized
[ 0.004086] AppArmor: AppArmor initialized
[ 0.004087] Yama: becoming mindful.
[ 0.004572] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009305] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.010581] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.010596] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.010992] Initializing cgroup subsys memory
[ 0.011006] Initializing cgroup subsys devices
[ 0.011010] Initializing cgroup subsys freezer
[ 0.011012] Initializing cgroup subsys blkio
[ 0.011015] Initializing cgroup subsys perf_event
[ 0.011018] Initializing cgroup subsys hugetlb
[ 0.011048] CPU: Physical Processor ID: 0
[ 0.011050] CPU: Processor Core ID: 0
[ 0.011053] mce: CPU supports 6 MCE banks
[ 0.011061] CPU0: Thermal monitoring handled by SMI
[ 0.011066] process: using mwait in idle threads
[ 0.011073] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.011073] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.011073] tlb_flushall_shift: -1
[ 0.011199] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[ 0.013051] ACPI: Core revision 20131115
[ 0.019597] ACPI: All ACPI Tables successfully acquired
[ 0.020007] ftrace: allocating 28617 entries in 112 pages
[ 0.032461] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.074805] smpboot: CPU0: Intel(R) Pentium(R) Dual CPU T3200 @ 2.00GHz (fam: 06, model: 0f, stepping: 0d)
[ 0.076000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.076000] perf_event_intel: PEBS disabled due to CPU errata
[ 0.076000] ... version: 2
[ 0.076000] ... bit width: 40
[ 0.076000] ... generic registers: 2
[ 0.076000] ... value mask: 000000ffffffffff
[ 0.076000] ... max period: 000000007fffffff
[ 0.076000] ... fixed-purpose events: 3
[ 0.076000] ... event mask: 0000000700000003
[ 0.076000] x86: Booting SMP configuration:
[ 0.076000] CPU1: Thermal monitoring handled by SMI
[ 0.076000] .... node #0, CPUs: #1
[ 0.087769] x86: Booted up 1 node, 2 CPUs
[ 0.087775] smpboot: Total of 2 processors activated (7979.88 BogoMIPS)
[ 0.087872] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.088152] devtmpfs: initialized
[ 0.089422] EVM: security.selinux
[ 0.089425] EVM: security.SMACK64
[ 0.089426] EVM: security.ima
[ 0.089428] EVM: security.capability
[ 0.092011] PM: Registering ACPI NVS region [mem 0xbdd8f000-0xbdddffff] (331776 bytes)
[ 0.092011] pinctrl core: initialized pinctrl subsystem
[ 0.092011] regulator-dummy: no parameters
[ 0.092011] RTC time: 14:19:19, date: 09/17/16
[ 0.092011] NET: Registered protocol family 16
[ 0.092011] cpuidle: using governor ladder
[ 0.092011] cpuidle: using governor menu
[ 0.092011] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.092011] ACPI: bus type PCI registered
[ 0.092011] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.092011] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.092011] PCI: not using MMCONFIG
[ 0.092011] PCI: Using configuration type 1 for base access
[ 0.096082] bio: create slab <bio-0> at 0
[ 0.096111] ACPI: Added _OSI(Module Device)
[ 0.096114] ACPI: Added _OSI(Processor Device)
[ 0.096116] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.096118] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.098352] ACPI : EC: EC description table is found, configuring boot EC
[ 0.108171] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.110626] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.112197] ACPI BIOS Warning (bug): Incorrect checksum in table [ATKG] - 0x78, should be 0xE5 (20131115/tbprint-214)
[ 0.112429] ACPI: SSDT 00000000bdd993f0 000248 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.112958] ACPI: Dynamic OEM Table Load:
[ 0.112962] ACPI: SSDT (null) 000248 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.113095] ACPI: SSDT 00000000bdd996d0 000765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.113607] ACPI: Dynamic OEM Table Load:
[ 0.113610] ACPI: SSDT (null) 000765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.113825] ACPI: SSDT 00000000bdd99320 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.114345] ACPI: Dynamic OEM Table Load:
[ 0.114348] ACPI: SSDT (null) 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.114431] ACPI: SSDT 00000000bdd99640 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.114945] ACPI: Dynamic OEM Table Load:
[ 0.114948] ACPI: SSDT (null) 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.115236] ACPI: Interpreter enabled
[ 0.115245] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.115252] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.115270] ACPI: (supports S0 S3 S4 S5)
[ 0.115273] ACPI: Using IOAPIC for interrupt routing
[ 0.115305] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.116797] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.136615] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.136906] ACPI: No dock devices found.
[ 0.150593] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.150603] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.150969] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.150972] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.151332] PCI host bridge to bus 0000:00
[ 0.151337] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.151340] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.151343] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.151345] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.151348] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.151351] pci_bus 0000:00: root bus resource [mem 0xbde00000-0xffffffff]
[ 0.151363] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.151393] DMAR: Forcing write-buffer flush capability
[ 0.151394] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.151488] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.151506] pci 0000:00:02.0: reg 0x10: [mem 0xfd800000-0xfdbfffff 64bit]
[ 0.151516] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.151524] pci 0000:00:02.0: reg 0x20: [io 0xcc00-0xcc07]
[ 0.151633] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.151648] pci 0000:00:02.1: reg 0x10: [mem 0xfdd00000-0xfddfffff 64bit]
[ 0.151805] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.151866] pci 0000:00:1a.0: reg 0x20: [io 0xc880-0xc89f]
[ 0.151989] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.152045] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.152106] pci 0000:00:1a.1: reg 0x20: [io 0xc800-0xc81f]
[ 0.152227] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.152273] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.152333] pci 0000:00:1a.2: reg 0x20: [io 0xc480-0xc49f]
[ 0.152454] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.152512] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.152541] pci 0000:00:1a.7: reg 0x10: [mem 0xfdefbc00-0xfdefbfff]
[ 0.152668] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.152771] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.152827] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.152849] pci 0000:00:1b.0: reg 0x10: [mem 0xfdef4000-0xfdef7fff 64bit]
[ 0.152948] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.153006] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.153051] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.153144] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.153203] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.153249] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.153350] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.153408] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.153453] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.153554] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.153613] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.153660] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.153760] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.153822] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.153874] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.153934] pci 0000:00:1d.0: reg 0x20: [io 0xc400-0xc41f]
[ 0.154055] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.154100] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.154160] pci 0000:00:1d.1: reg 0x20: [io 0xc080-0xc09f]
[ 0.154281] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.154327] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.154388] pci 0000:00:1d.2: reg 0x20: [io 0xc000-0xc01f]
[ 0.154509] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.154566] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.154596] pci 0000:00:1d.7: reg 0x10: [mem 0xfdefb800-0xfdefbbff]
[ 0.154720] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.154824] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.154871] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.154991] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.155036] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 0.155251] pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018f
[ 0.155274] pci 0000:00:1f.2: reg 0x10: [io 0xbc00-0xbc07]
[ 0.155285] pci 0000:00:1f.2: reg 0x14: [io 0xb880-0xb883]
[ 0.155297] pci 0000:00:1f.2: reg 0x18: [io 0xb800-0xb807]
[ 0.155309] pci 0000:00:1f.2: reg 0x1c: [io 0xb480-0xb483]
[ 0.155320] pci 0000:00:1f.2: reg 0x20: [io 0xb400-0xb40f]
[ 0.155331] pci 0000:00:1f.2: reg 0x24: [io 0xb080-0xb08f]
[ 0.155471] pci 0000:00:1f.5: [8086:292d] type 00 class 0x010185
[ 0.155493] pci 0000:00:1f.5: reg 0x10: [io 0xac00-0xac07]
[ 0.155505] pci 0000:00:1f.5: reg 0x14: [io 0xa880-0xa883]
[ 0.155516] pci 0000:00:1f.5: reg 0x18: [io 0xa800-0xa807]
[ 0.155528] pci 0000:00:1f.5: reg 0x1c: [io 0xa480-0xa483]
[ 0.155539] pci 0000:00:1f.5: reg 0x20: [io 0xa400-0xa40f]
[ 0.155550] pci 0000:00:1f.5: reg 0x24: [io 0xa080-0xa08f]
[ 0.155740] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.155859] pci 0000:02:00.0: [168c:002a] type 00 class 0x028000
[ 0.155888] pci 0000:02:00.0: reg 0x10: [mem 0xfdff0000-0xfdffffff 64bit]
[ 0.156046] pci 0000:02:00.0: supports D1
[ 0.156049] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.156090] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.164021] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.164030] pci 0000:00:1c.1: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.164143] pci 0000:00:1c.2: PCI bridge to [bus 03-04]
[ 0.164149] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.164154] pci 0000:00:1c.2: bridge window [mem 0xfe000000-0xfe9fffff]
[ 0.164162] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfcefffff 64bit pref]
[ 0.164325] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.164389] pci 0000:05:00.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.164501] pci 0000:05:00.0: reg 0x18: [mem 0xfcfff000-0xfcffffff 64bit pref]
[ 0.164570] pci 0000:05:00.0: reg 0x20: [mem 0xfcfe0000-0xfcfeffff 64bit pref]
[ 0.164615] pci 0000:05:00.0: reg 0x30: [mem 0xfeaf0000-0xfeafffff pref]
[ 0.164875] pci 0000:05:00.0: supports D1 D2
[ 0.164878] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.164979] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.165069] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.165075] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.165080] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.165089] pci 0000:00:1c.5: bridge window [mem 0xfcf00000-0xfcffffff 64bit pref]
[ 0.165159] pci 0000:06:01.0: [1180:0832] type 00 class 0x0c0010
[ 0.165176] pci 0000:06:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.165178] pci 0000:06:01.0: MMC cards are now supported by standard SDHCI controller
[ 0.165195] pci 0000:06:01.0: reg 0x10: [mem 0xfebff800-0xfebfffff]
[ 0.165297] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
[ 0.165358] pci 0000:06:01.1: [1180:0822] type 00 class 0x080500
[ 0.165382] pci 0000:06:01.1: reg 0x10: [mem 0xfebff400-0xfebff4ff]
[ 0.165483] pci 0000:06:01.1: supports D1 D2
[ 0.165486] pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.165545] pci 0000:06:01.2: [1180:0592] type 00 class 0x088000
[ 0.165569] pci 0000:06:01.2: reg 0x10: [mem 0xfebfec00-0xfebfecff]
[ 0.165670] pci 0000:06:01.2: supports D1 D2
[ 0.165672] pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.165731] pci 0000:06:01.3: [1180:0852] type 00 class 0x088000
[ 0.165754] pci 0000:06:01.3: reg 0x10: [mem 0xfebfe800-0xfebfe8ff]
[ 0.165855] pci 0000:06:01.3: supports D1 D2
[ 0.165858] pci 0000:06:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.165960] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[ 0.165969] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.165977] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.165980] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.165982] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.165985] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.165988] pci 0000:00:1e.0: bridge window [mem 0xbde00000-0xffffffff] (subtractive decode)
[ 0.168172] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
[ 0.168241] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
[ 0.168304] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[ 0.168366] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
[ 0.168429] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
[ 0.168492] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
[ 0.168556] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
[ 0.168620] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
[ 0.168944] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.168954] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.169031] Found 1 acpi root devices
[ 0.169132] ACPI : EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 0.169271] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.169271] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.169271] vgaarb: loaded
[ 0.169271] vgaarb: bridge control possible 0000:00:02.0
[ 0.169271] SCSI subsystem initialized
[ 0.169271] libata version 3.00 loaded.
[ 0.169271] ACPI: bus type USB registered
[ 0.169271] usbcore: registered new interface driver usbfs
[ 0.169271] usbcore: registered new interface driver hub
[ 0.169271] usbcore: registered new device driver usb
[ 0.169271] PCI: Using ACPI for IRQ routing
[ 0.179418] PCI: pci_cache_line_size set to 64 bytes
[ 0.179522] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.179525] e820: reserve RAM buffer [mem 0xbdd80000-0xbfffffff]
[ 0.179645] NetLabel: Initializing
[ 0.179647] NetLabel: domain hash size = 128
[ 0.179649] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.179670] NetLabel: unlabeled traffic allowed by default
[ 0.179688] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.179688] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.179688] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.181016] Switched to clocksource hpet
[ 0.189298] AppArmor: AppArmor Filesystem Enabled
[ 0.189348] pnp: PnP ACPI init
[ 0.189369] ACPI: bus type PNP registered
[ 0.189494] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.189500] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.189553] pnp 00:01: [dma 4]
[ 0.189577] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.189627] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.189688] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.189768] pnp 00:04: Plug and Play ACPI device, IDs SYN0a06 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.189797] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.189834] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.190051] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.190055] system 00:07: [io 0x0800-0x087f] could not be reserved
[ 0.190058] system 00:07: [io 0x0400-0x041f] has been reserved
[ 0.190061] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.190065] system 00:07: [mem 0xfdefb400-0xfdefb4ff window] has been reserved
[ 0.190068] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.190071] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.190074] system 00:07: [mem 0xfed45000-0xfed89fff] has been reserved
[ 0.190077] system 00:07: [mem 0xfed90000-0xfed90fff] has been reserved
[ 0.190080] system 00:07: [mem 0xfed91000-0xfed91fff] has been reserved
[ 0.190083] system 00:07: [mem 0xfed92000-0xfed92fff] has been reserved
[ 0.190086] system 00:07: [mem 0xfed93000-0xfed93fff] has been reserved
[ 0.190089] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.190092] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.190096] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.190179] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.190273] system 00:09: [mem 0xffa00000-0xffbfffff] could not be reserved
[ 0.190276] system 00:09: [mem 0xffe00000-0xffffffff] could not be reserved
[ 0.190280] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.190358] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.190362] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.190455] system 00:0b: [io 0x0250-0x0253] has been reserved
[ 0.190458] system 00:0b: [io 0x0256-0x025f] has been reserved
[ 0.190462] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.190465] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.190468] system 00:0b: [mem 0xfec10000-0xfec17fff] has been reserved
[ 0.190471] system 00:0b: [mem 0xfec18000-0xfec1ffff] has been reserved
[ 0.190474] system 00:0b: [mem 0xfec20000-0xfec27fff] has been reserved
[ 0.190476] system 00:0b: [mem 0xfec38000-0xfec3ffff] has been reserved
[ 0.190480] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.190594] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.190598] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.192273] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.192278] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.192281] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.192284] system 00:0d: [mem 0x00100000-0xbddfffff] could not be reserved
[ 0.192289] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.192440] pnp: PnP ACPI: found 14 devices
[ 0.192442] ACPI: bus type PNP unregistered
[ 0.199409] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.199427] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.199433] pci 0000:00:1c.1: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.199444] pci 0000:00:1c.2: PCI bridge to [bus 03-04]
[ 0.199448] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.199454] pci 0000:00:1c.2: bridge window [mem 0xfe000000-0xfe9fffff]
[ 0.199460] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfcefffff 64bit pref]
[ 0.199468] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.199471] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.199478] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.199483] pci 0000:00:1c.5: bridge window [mem 0xfcf00000-0xfcffffff 64bit pref]
[ 0.199491] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 0.199497] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.199508] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.199512] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.199514] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.199517] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.199520] pci_bus 0000:00: resource 8 [mem 0xbde00000-0xffffffff]
[ 0.199523] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.199526] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.199528] pci_bus 0000:03: resource 1 [mem 0xfe000000-0xfe9fffff]
[ 0.199531] pci_bus 0000:03: resource 2 [mem 0xfa000000-0xfcefffff 64bit pref]
[ 0.199533] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.199536] pci_bus 0000:05: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.199539] pci_bus 0000:05: resource 2 [mem 0xfcf00000-0xfcffffff 64bit pref]
[ 0.199541] pci_bus 0000:06: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.199544] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.199546] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.199549] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.199551] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.199554] pci_bus 0000:06: resource 8 [mem 0xbde00000-0xffffffff]
[ 0.199600] NET: Registered protocol family 2
[ 0.199873] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.200048] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.200269] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.200351] TCP: reno registered
[ 0.200371] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.200406] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.200547] NET: Registered protocol family 1
[ 0.200572] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.201623] PCI: CLS 32 bytes, default 64
[ 0.201755] Trying to unpack rootfs image as initramfs...
[ 0.620492] Freeing initrd memory: 18776K (ffff880035b44000 - ffff880036d9a000)
[ 0.620619] Simple Boot Flag at 0x51 set to 0x1
[ 0.620785] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3
[ 0.620796] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3
[ 0.620883] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.620885] Scanning for low memory corruption every 60 seconds
[ 0.621186] Initialise system trusted keyring
[ 0.621253] audit: initializing netlink socket (disabled)
[ 0.621271] type=2000 audit(1474121959.620:1): initialized
[ 0.658747] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.660369] zbud: loaded
[ 0.660550] VFS: Disk quotas dquot_6.5.2
[ 0.660605] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.661235] fuse init (API version 7.22)
[ 0.661334] msgmni has been set to 5945
[ 0.661415] Key type big_key registered
[ 0.661844] Key type asymmetric registered
[ 0.661847] Asymmetric key parser 'x509' registered
[ 0.661897] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.661937] io scheduler noop registered
[ 0.661940] io scheduler deadline registered (default)
[ 0.661974] io scheduler cfq registered
[ 0.662237] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.662413] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.662579] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.662751] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.662876] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.662882] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.662905] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.662908] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.662914] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.662936] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.662942] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.662965] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.662968] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 0.662973] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.662994] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.663048] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2944 ss_vid 1043 ss_did 11c7
[ 0.663088] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[ 0.663094] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.663149] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.663151] vesafb: scrolling: redraw
[ 0.663153] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.663990] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010780000, using 3072k, total 3072k
[ 0.666612] Console: switching to colour frame buffer device 128x48
[ 0.669091] fb0: VESA VGA frame buffer device
[ 0.669122] intel_idle: does not run on family 6 model 15
[ 0.669133] ipmi message handler version 39.2
[ 0.669230] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.669299] ACPI: AC Adapter [AC0] (on-line)
[ 0.669437] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 0.669444] ACPI: Sleep Button [SLPB]
[ 0.669490] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.673718] ACPI: Lid Switch [LID]
[ 0.673777] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.673781] ACPI: Power Button [PWRF]
[ 0.674277] Monitor-Mwait will be used to enter C-1 state
[ 0.674283] Monitor-Mwait will be used to enter C-2 state
[ 0.674287] Monitor-Mwait will be used to enter C-3 state
[ 0.674291] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.674302] ACPI: acpi_idle registered with cpuidle
[ 0.678821] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.678825] ACPI: Thermal Zone [THRM] (37 C)
[ 0.678875] GHES: HEST is not enabled!
[ 0.679028] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.682078] Linux agpgart interface v0.103
[ 0.682222] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 0.682316] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.682838] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.683043] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.685190] brd: module loaded
[ 0.686460] loop: module loaded
[ 0.686659] ata_piix 0000:00:1f.2: version 2.13
[ 0.686797] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 0.687923] scsi0 : ata_piix
[ 0.688173] scsi1 : ata_piix
[ 0.688249] ata1: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19
[ 0.688256] ata2: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19
[ 0.688417] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.688449] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[ 0.688702] scsi2 : ata_piix
[ 0.688806] scsi3 : ata_piix
[ 0.688846] ata3: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19
[ 0.688848] ata4: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19
[ 0.689333] libphy: Fixed MDIO Bus: probed
[ 0.689480] tun: Universal TUN/TAP device driver, 1.6
[ 0.689482] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.689566] PPP generic driver version 2.4.2
[ 0.689640] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.689647] ehci-pci: EHCI PCI platform driver
[ 0.689830] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.689839] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.689886] ehci-pci 0000:00:1a.7: debug port 1
[ 0.693797] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.693826] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfdefbc00
[ 0.704054] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.704146] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.704150] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.704153] usb usb1: Product: EHCI Host Controller
[ 0.704155] usb usb1: Manufacturer: Linux 3.13.0-95-generic ehci_hcd
[ 0.704158] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.704326] hub 1-0:1.0: USB hub found
[ 0.704336] hub 1-0:1.0: 6 ports detected
[ 0.705674] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.705682] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.705698] ehci-pci 0000:00:1d.7: debug port 1
[ 0.709603] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.709625] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdefb800
[ 0.718555] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.718563] ACPI: Battery Slot [BAT0] (battery present)
[ 0.720051] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.720127] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.720130] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.720133] usb usb2: Product: EHCI Host Controller
[ 0.720135] usb usb2: Manufacturer: Linux 3.13.0-95-generic ehci_hcd
[ 0.720138] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.720296] hub 2-0:1.0: USB hub found
[ 0.720305] hub 2-0:1.0: 6 ports detected
[ 0.721303] ehci-platform: EHCI generic platform driver
[ 0.721319] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.721321] ohci-pci: OHCI PCI platform driver
[ 0.721339] ohci-platform: OHCI generic platform driver
[ 0.721347] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.721444] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.721452] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.721494] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c880
[ 0.721558] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.721561] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.721564] usb usb3: Product: UHCI Host Controller
[ 0.721566] usb usb3: Manufacturer: Linux 3.13.0-95-generic uhci_hcd
[ 0.721569] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.721729] hub 3-0:1.0: USB hub found
[ 0.721738] hub 3-0:1.0: 2 ports detected
[ 0.722189] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.722197] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.722239] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800
[ 0.722297] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.722300] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.722303] usb usb4: Product: UHCI Host Controller
[ 0.722305] usb usb4: Manufacturer: Linux 3.13.0-95-generic uhci_hcd
[ 0.722308] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.722459] hub 4-0:1.0: USB hub found
[ 0.722468] hub 4-0:1.0: 2 ports detected
[ 0.722910] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.722918] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.722948] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c480
[ 0.723007] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.723011] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.723013] usb usb5: Product: UHCI Host Controller
[ 0.723016] usb usb5: Manufacturer: Linux 3.13.0-95-generic uhci_hcd
[ 0.723018] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.723177] hub 5-0:1.0: USB hub found
[ 0.723188] hub 5-0:1.0: 2 ports detected
[ 0.723628] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.723635] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.723664] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
[ 0.723721] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.723724] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.723728] usb usb6: Product: UHCI Host Controller
[ 0.723730] usb usb6: Manufacturer: Linux 3.13.0-95-generic uhci_hcd
[ 0.723733] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.723883] hub 6-0:1.0: USB hub found
[ 0.723891] hub 6-0:1.0: 2 ports detected
[ 0.724366] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.724373] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.724402] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c080
[ 0.724460] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.724463] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.724465] usb usb7: Product: UHCI Host Controller
[ 0.724468] usb usb7: Manufacturer: Linux 3.13.0-95-generic uhci_hcd
[ 0.724471] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.724619] hub 7-0:1.0: USB hub found
[ 0.724628] hub 7-0:1.0: 2 ports detected
[ 0.725077] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.725085] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.725117] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c000
[ 0.725178] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.725181] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.725184] usb usb8: Product: UHCI Host Controller
[ 0.725186] usb usb8: Manufacturer: Linux 3.13.0-95-generic uhci_hcd
[ 0.725189] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.725340] hub 8-0:1.0: USB hub found
[ 0.725349] hub 8-0:1.0: 2 ports detected
[ 0.725824] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.730282] i8042: Detected active multiplexing controller, rev 1.1
[ 0.733550] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.733558] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.733588] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.733613] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.733639] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.733805] mousedev: PS/2 mouse device common for all mice
[ 0.734066] rtc_cmos 00:02: RTC can wake from S4
[ 0.734230] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.734262] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.734363] device-mapper: uevent: version 1.0.3
[ 0.734466] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.734475] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.734603] TCP: cubic registered
[ 0.734720] NET: Registered protocol family 10
[ 0.734936] NET: Registered protocol family 17
[ 0.734952] Key type dns_resolver registered
[ 0.735285] Loading compiled-in X.509 certificates
[ 0.736646] Loaded X.509 cert 'Magrathea: Glacier signing key: 51d5d773f107ba1bc09d336838c43cde749e4e05'
[ 0.736666] registered taskstats version 1
[ 0.739682] Key type trusted registered
[ 0.745103] Key type encrypted registered
[ 0.745112] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.745115] IMA: No TPM chip found, activating TPM-bypass!
[ 0.745644] regulator-dummy: disabling
[ 0.745714] Magic number: 0:53:334
[ 0.745780] tty tty55: hash matches
[ 0.745880] rtc_cmos 00:02: setting system clock to 2016-09-17 14:19:20 UTC (1474121960)
[ 0.746516] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.746518] EDD information not available.
[ 0.746557] PM: Hibernation image not present or could not be loaded.
[ 0.775060] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.164094] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.168095] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.172366] ata1.00: ATA-8: WDC WD3200BJKT-75F4T0, 11.01A11, max UDMA/133
[ 1.172370] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.180371] ata1.00: configured for UDMA/133
[ 1.180545] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BJKT-7 11.0 PQ: 0 ANSI: 5
[ 1.180714] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.180733] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.180826] sd 0:0:0:0: [sda] Write Protect is off
[ 1.180830] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.180893] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.192180] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, AS00, max UDMA/100
[ 1.192184] ata2.00: applying bridge limits
[ 1.215944] sda: sda1 sda2 sda3
[ 1.216420] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.228173] ata2.00: configured for UDMA/100
[ 1.234118] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A AS00 PQ: 0 ANSI: 5
[ 1.241769] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.241772] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.241911] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.242025] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.244279] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[ 1.244285] Write protecting the kernel read-only data: 12288k
[ 1.244996] Freeing unused kernel memory: 760K (ffff880001742000 - ffff880001800000)
[ 1.247505] Freeing unused kernel memory: 680K (ffff880001b56000 - ffff880001c00000)
[ 1.266508] systemd-udevd[110]: starting version 204
[ 1.292047] usb 2-4: new high-speed USB device number 3 using ehci-pci
[ 1.331852] sdhci: Secure Digital Host Controller Interface driver
[ 1.331856] sdhci: Copyright(c) Pierre Ossman
[ 1.348449] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.348467] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.355308] r8169 0000:05:00.0: irq 44 for MSI/MSI-X
[ 1.355571] r8169 0000:05:00.0 eth0: RTL8168c/8111c at 0xffffc90010748000, 00:23:54:92:b3:f0, XID 1c4000c0 IRQ 44
[ 1.355575] r8169 0000:05:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 1.356404] sdhci-pci 0000:06:01.1: SDHCI controller found [1180:0822] (rev 22)
[ 1.357526] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.360083] sdhci-pci 0000:06:01.1: dummy supplies not allowed
[ 1.360089] mmc0: no vqmmc regulator found
[ 1.360092] sdhci-pci 0000:06:01.1: dummy supplies not allowed
[ 1.360094] mmc0: no vmmc regulator found
[ 1.361095] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.372272] mmc0: SDHCI controller on PCI [0000:06:01.1] using DMA
[ 1.436050] usb 2-4: New USB device found, idVendor=05e3, idProduct=0743
[ 1.436056] usb 2-4: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[ 1.436059] usb 2-4: Product: USB Reader
[ 1.436062] usb 2-4: Manufacturer: Genesys
[ 1.436064] usb 2-4: SerialNumber: 000000003298
[ 1.436466] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.436672] firewire_ohci 0000:06:01.0: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 1.502533] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.548034] usb 2-5: new high-speed USB device number 4 using ehci-pci
[ 1.568396] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.636318] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.673048] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.693938] usb 2-5: New USB device found, idVendor=04f2, idProduct=b012
[ 1.693943] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.693947] usb 2-5: Product: USB2.0 1.3M UVC WebCam
[ 1.693950] usb 2-5: Manufacturer: Chicony Electronics Co., Ltd.
[ 1.693952] usb 2-5: SerialNumber: SN0001
[ 1.936169] firewire_core 0000:06:01.0: created device fw0: GUID 001e8c0001aa779b, S400
[ 1.940881] usb 6-2: new full-speed USB device number 2 using uhci_hcd
[ 2.109750] usb 6-2: New USB device found, idVendor=046d, idProduct=c52b
[ 2.109755] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.109759] usb 6-2: Product: USB Receiver
[ 2.109761] usb 6-2: Manufacturer: Logitech
[ 2.145060] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008/0x0, board id: 0, fw id: 30712
[ 2.185375] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 2.188595] random: init urandom read with 91 bits of entropy available
[ 3.353923] random: nonblocking pool is initialized
[ 11.822552] Adding 976892k swap on /dev/sda2. Priority:-1 extents:1 across:976892k FS
[ 11.927699] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.148186] systemd-udevd[278]: starting version 204
[ 12.491987] lp: driver loaded but no devices found
[ 12.514284] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.564212] ppdev: user-space parallel port driver
gilles@altec:~$ Hors ligne
#17 Le 30/09/2016, à 21:21
- moko138
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
Le problème est signalé depuis un an et demi au moins 
Pendant que j'épluche ton dmesg, donne, s'il te plaît :
cat /proc/cpuinfo
lspci
sudo lshwPour cette dernière qui est est longue à venir, tu devras d'abord installer lshw :
sudo apt-get install lshw - -
As-tu deux écrans connectés simultanément ?
Si oui, par quels types de connecteurs (HDMI, DVI, DisplayPort, VGA...) ?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#18 Le 30/09/2016, à 21:22
- nilimo
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
Le disque dur n'est pas d'origine, il a été changé par un disque d’occasion après casse.
Hors ligne
#19 Le 30/09/2016, à 21:24
- nilimo
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
gilles@altec:~$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Pentium(R) Dual CPU T3200 @ 2.00GHz
stepping : 13
microcode : 0xa3
cpu MHz : 1000.000
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm
bugs :
bogomips : 3989.55
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Pentium(R) Dual CPU T3200 @ 2.00GHz
stepping : 13
microcode : 0xa3
cpu MHz : 1000.000
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm
bugs :
bogomips : 3989.55
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
gilles@altec:~$ Hors ligne
#20 Le 30/09/2016, à 21:26
- nilimo
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
gilles@altec:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 03)
00:1f.5 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 03)
02:00.0 Network controller: Qualcomm Atheros AR928X Wireless Network Adapter (PCI-Express) (rev 01)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
06:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
06:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
06:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
06:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
gilles@altec:~$ Hors ligne
#21 Le 30/09/2016, à 21:33
- nilimo
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
gilles@altec:~$ sudo lshw
altec
description: Ordinateur Bloc-notes
produit: X71Q
fabriquant: ASUSTeK Computer Inc.
version: 1.0
numéro de série: NF1S8C07650315
bits: 64 bits
fonctionnalités: smbios-2.5 dmi-2.5 vsyscall32
configuration: chassis=notebook uuid=8068ACF0-E2D0-DD81-3131-00235492B3F0
*-core
description: Carte mère
produit: X71Q
fabriquant: ASUSTeK Computer Inc.
identifiant matériel: 0
version: 1.0
numéro de série: BSN12345678901234567
emplacement: MIDDLE
*-firmware
description: BIOS
fabriquant: American Megatrends Inc.
identifiant matériel: 0
version: 205
date: 06/05/2009
taille: 64KiB
capacité: 960KiB
fonctionnalités: isa pci pnp upgrade shadowing escd cdboot bootselect edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int17printer int10video acpi usb smartbattery biosbootspecification netboot
*-cpu
description: CPU
produit: Intel(R) Pentium(R) Dual CPU T3200 @ 2.00GHz
fabriquant: Intel Corp.
identifiant matériel: 4
information bus: cpu@0
version: Intel(R) Pentium(R) Dual CPU T3200 @ 2.00GHz
numéro de série: PSN12345678901234567
emplacement: Socket 478
taille: 2GHz
capacité: 2GHz
bits: 64 bits
horloge: 167MHz
fonctionnalités: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm cpufreq
configuration: cores=2 enabledcores=2 threads=2
*-cache:0
description: L1 cache
identifiant matériel: 5
emplacement: L1-Cache
taille: 64KiB
capacité: 64KiB
fonctionnalités: internal write-back data
configuration: level=1
*-cache:1
description: L2 cache
identifiant matériel: 7
emplacement: L2-Cache
taille: 1MiB
capacité: 1MiB
fonctionnalités: internal write-back unified
configuration: level=2
*-cache
description: L1 cache
identifiant matériel: 6
emplacement: L1-Cache
taille: 64KiB
capacité: 64KiB
fonctionnalités: internal write-back instruction
configuration: level=1
*-memory
description: Mémoire Système
identifiant matériel: 20
emplacement: Carte mère
taille: 3GiB
*-bank:0
description: SODIMM DDR2 Synchrone 667 MHz (1,5 ns)
produit: N/A
fabriquant: N/A
identifiant matériel: 0
numéro de série: N/A
emplacement: SODIMM0
taille: 1GiB
bits: 64 bits
horloge: 667MHz (1.5ns)
*-bank:1
description: SODIMM DDR2 Synchrone 667 MHz (1,5 ns)
produit: N/A
fabriquant: N/A
identifiant matériel: 1
numéro de série: N/A
emplacement: SODIMM1
taille: 2GiB
bits: 64 bits
horloge: 667MHz (1.5ns)
*-pci
description: Host bridge
produit: Mobile 4 Series Chipset Memory Controller Hub
fabriquant: Intel Corporation
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: 07
bits: 32 bits
horloge: 33MHz
configuration: driver=agpgart-intel
ressources: irq:0
*-display:0
description: VGA compatible controller
produit: Mobile 4 Series Chipset Integrated Graphics Controller
fabriquant: Intel Corporation
identifiant matériel: 2
information bus: pci@0000:00:02.0
version: 07
bits: 64 bits
horloge: 33MHz
fonctionnalités: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
ressources: irq:29 mémoire:fd800000-fdbfffff mémoire:d0000000-dfffffff portE/S:cc00(taille=8)
*-display:1 NON-RÉCLAMÉ
description: Display controller
produit: Mobile 4 Series Chipset Integrated Graphics Controller
fabriquant: Intel Corporation
identifiant matériel: 2.1
information bus: pci@0000:00:02.1
version: 07
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration: latency=0
ressources: mémoire:fdd00000-fddfffff
*-usb:0
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #4
fabriquant: Intel Corporation
identifiant matériel: 1a
information bus: pci@0000:00:1a.0
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:16 portE/S:c880(taille=32)
*-usbhost
produit: UHCI Host Controller
fabriquant: Linux 4.4.0-38-generic uhci_hcd
identifiant matériel: 1
information bus: usb@3
nom logique: usb3
version: 4.04
fonctionnalités: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:1
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #5
fabriquant: Intel Corporation
identifiant matériel: 1a.1
information bus: pci@0000:00:1a.1
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:21 portE/S:c800(taille=32)
*-usbhost
produit: UHCI Host Controller
fabriquant: Linux 4.4.0-38-generic uhci_hcd
identifiant matériel: 1
information bus: usb@4
nom logique: usb4
version: 4.04
fonctionnalités: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:2
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #6
fabriquant: Intel Corporation
identifiant matériel: 1a.2
information bus: pci@0000:00:1a.2
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:19 portE/S:c480(taille=32)
*-usbhost
produit: UHCI Host Controller
fabriquant: Linux 4.4.0-38-generic uhci_hcd
identifiant matériel: 1
information bus: usb@5
nom logique: usb5
version: 4.04
fonctionnalités: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:3
description: USB controller
produit: 82801I (ICH9 Family) USB2 EHCI Controller #2
fabriquant: Intel Corporation
identifiant matériel: 1a.7
information bus: pci@0000:00:1a.7
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
ressources: irq:18 mémoire:fdefbc00-fdefbfff
*-usbhost
produit: EHCI Host Controller
fabriquant: Linux 4.4.0-38-generic ehci_hcd
identifiant matériel: 1
information bus: usb@1
nom logique: usb1
version: 4.04
fonctionnalités: usb-2.00
configuration: driver=hub slots=6 speed=480Mbit/s
*-multimedia
description: Audio device
produit: 82801I (ICH9 Family) HD Audio Controller
fabriquant: Intel Corporation
identifiant matériel: 1b
information bus: pci@0000:00:1b.0
version: 03
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
ressources: irq:30 mémoire:fdef4000-fdef7fff
*-pci:0
description: PCI bridge
produit: 82801I (ICH9 Family) PCI Express Port 1
fabriquant: Intel Corporation
identifiant matériel: 1c
information bus: pci@0000:00:1c.0
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:24
*-pci:1
description: PCI bridge
produit: 82801I (ICH9 Family) PCI Express Port 2
fabriquant: Intel Corporation
identifiant matériel: 1c.1
information bus: pci@0000:00:1c.1
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:25 mémoire:fdf00000-fdffffff
*-network
description: Interface réseau sans fil
produit: AR928X Wireless Network Adapter (PCI-Express)
fabriquant: Qualcomm Atheros
identifiant matériel: 0
information bus: pci@0000:02:00.0
nom logique: wlan0
version: 01
numéro de série: 00:15:af:e0:ee:6b
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress msix bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=ath9k driverversion=4.4.0-38-generic firmware=N/A ip=192.168.0.17 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn
ressources: irq:17 mémoire:fdff0000-fdffffff
*-pci:2
description: PCI bridge
produit: 82801I (ICH9 Family) PCI Express Port 3
fabriquant: Intel Corporation
identifiant matériel: 1c.2
information bus: pci@0000:00:1c.2
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:26 portE/S:d000(taille=4096) mémoire:fe000000-fe9fffff portE/S:fa000000(taille=49283072)
*-pci:3
description: PCI bridge
produit: 82801I (ICH9 Family) PCI Express Port 6
fabriquant: Intel Corporation
identifiant matériel: 1c.5
information bus: pci@0000:00:1c.5
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:27 portE/S:e000(taille=4096) mémoire:fea00000-feafffff portE/S:fcf00000(taille=1048576)
*-network
description: Ethernet interface
produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
fabriquant: Realtek Semiconductor Co., Ltd.
identifiant matériel: 0
information bus: pci@0000:05:00.0
nom logique: eth0
version: 02
numéro de série: 00:23:54:92:b3:f0
taille: 10Mbit/s
capacité: 1Gbit/s
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s
ressources: irq:28 portE/S:e800(taille=256) mémoire:fcfff000-fcffffff mémoire:fcfe0000-fcfeffff mémoire:feaf0000-feafffff
*-usb:4
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #1
fabriquant: Intel Corporation
identifiant matériel: 1d
information bus: pci@0000:00:1d.0
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:23 portE/S:c400(taille=32)
*-usbhost
produit: UHCI Host Controller
fabriquant: Linux 4.4.0-38-generic uhci_hcd
identifiant matériel: 1
information bus: usb@6
nom logique: usb6
version: 4.04
fonctionnalités: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb
description: Clavier
produit: USB Receiver
fabriquant: Logitech
identifiant matériel: 2
information bus: usb@6:2
version: 24.00
fonctionnalités: usb-2.00
configuration: driver=usbhid maxpower=98mA speed=12Mbit/s
*-usb:5
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #2
fabriquant: Intel Corporation
identifiant matériel: 1d.1
information bus: pci@0000:00:1d.1
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:19 portE/S:c080(taille=32)
*-usbhost
produit: UHCI Host Controller
fabriquant: Linux 4.4.0-38-generic uhci_hcd
identifiant matériel: 1
information bus: usb@7
nom logique: usb7
version: 4.04
fonctionnalités: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:6
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #3
fabriquant: Intel Corporation
identifiant matériel: 1d.2
information bus: pci@0000:00:1d.2
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:18 portE/S:c000(taille=32)
*-usbhost
produit: UHCI Host Controller
fabriquant: Linux 4.4.0-38-generic uhci_hcd
identifiant matériel: 1
information bus: usb@8
nom logique: usb8
version: 4.04
fonctionnalités: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:7
description: USB controller
produit: 82801I (ICH9 Family) USB2 EHCI Controller #1
fabriquant: Intel Corporation
identifiant matériel: 1d.7
information bus: pci@0000:00:1d.7
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
ressources: irq:23 mémoire:fdefb800-fdefbbff
*-usbhost
produit: EHCI Host Controller
fabriquant: Linux 4.4.0-38-generic ehci_hcd
identifiant matériel: 1
information bus: usb@2
nom logique: usb2
version: 4.04
fonctionnalités: usb-2.00
configuration: driver=hub slots=6 speed=480Mbit/s
*-usb:0
description: Périphérique de stockage de masse
produit: External USB 3.0
fabriquant: TOSHIBA
identifiant matériel: 1
information bus: usb@2:1
nom logique: scsi4
version: 3.15
numéro de série: 20160608007365F
fonctionnalités: usb-2.10 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=500mA speed=480Mbit/s
*-disk
description: SCSI Disk
produit: External USB 3.0
fabriquant: TOSHIBA
identifiant matériel: 0.0.0
information bus: scsi@4:0.0.0
nom logique: /dev/sdb
version: 5438
numéro de série: 20160608007365F
taille: 465GiB (500GB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=6 logicalsectorsize=512 sectorsize=512 signature=9e1f7e87
*-volume
description: Windows NTFS volume
identifiant matériel: 1
information bus: scsi@4:0.0.0,1
nom logique: /dev/sdb1
nom logique: /media/gilles/TOSHIBA EXT
version: 3.1
numéro de série: b4c0-0051
taille: 465GiB
capacité: 465GiB
fonctionnalités: primary bootable ntfs initialized
configuration: clustersize=4096 created=2016-06-17 09:27:47 filesystem=ntfs label=TOSHIBA EXT mount.fstype=fuseblk mount.options=rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 state=mounted
*-usb:1
description: Vidéo
produit: USB2.0 1.3M UVC WebCam
fabriquant: Chicony Electronics Co., Ltd.
identifiant matériel: 5
information bus: usb@2:5
version: 3.46
numéro de série: SN0001
fonctionnalités: usb-2.00
configuration: driver=uvcvideo maxpower=500mA speed=480Mbit/s
*-pci:4
description: PCI bridge
produit: 82801 Mobile PCI Bridge
fabriquant: Intel Corporation
identifiant matériel: 1e
information bus: pci@0000:00:1e.0
version: 93
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci subtractive_decode bus_master cap_list
ressources: mémoire:feb00000-febfffff
*-firewire
description: FireWire (IEEE 1394)
produit: R5C832 IEEE 1394 Controller
fabriquant: Ricoh Co Ltd
identifiant matériel: 1
information bus: pci@0000:06:01.0
version: 05
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm ohci bus_master cap_list
configuration: driver=firewire_ohci latency=32 maxlatency=4 mingnt=2
ressources: irq:16 mémoire:febff800-febfffff
*-generic:0
description: SD Host controller
produit: R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter
fabriquant: Ricoh Co Ltd
identifiant matériel: 1.1
information bus: pci@0000:06:01.1
version: 22
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration: driver=sdhci-pci latency=64
ressources: irq:17 mémoire:febff400-febff4ff
*-generic:1
description: System peripheral
produit: R5C592 Memory Stick Bus Host Adapter
fabriquant: Ricoh Co Ltd
identifiant matériel: 1.2
information bus: pci@0000:06:01.2
version: 12
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration: driver=r592 latency=64
ressources: irq:17 mémoire:febfec00-febfecff
*-generic:2
description: System peripheral
produit: xD-Picture Card Controller
fabriquant: Ricoh Co Ltd
identifiant matériel: 1.3
information bus: pci@0000:06:01.3
version: 12
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration: driver=r852 latency=64
ressources: irq:17 mémoire:febfe800-febfe8ff
*-isa
description: ISA bridge
produit: ICH9M LPC Interface Controller
fabriquant: Intel Corporation
identifiant matériel: 1f
information bus: pci@0000:00:1f.0
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
ressources: irq:0
*-ide:0
description: IDE interface
produit: 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode]
fabriquant: Intel Corporation
identifiant matériel: 1f.2
information bus: pci@0000:00:1f.2
version: 03
bits: 32 bits
horloge: 66MHz
fonctionnalités: ide pm bus_master cap_list
configuration: driver=ata_piix latency=0
ressources: irq:19 portE/S:bc00(taille=8) portE/S:b880(taille=4) portE/S:b800(taille=8) portE/S:b480(taille=4) portE/S:b400(taille=16) portE/S:b080(taille=16)
*-ide:1
description: IDE interface
produit: 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode]
fabriquant: Intel Corporation
identifiant matériel: 1f.5
information bus: pci@0000:00:1f.5
version: 03
bits: 32 bits
horloge: 66MHz
fonctionnalités: ide pm bus_master cap_list
configuration: driver=ata_piix latency=0
ressources: irq:19 portE/S:ac00(taille=8) portE/S:a880(taille=4) portE/S:a800(taille=8) portE/S:a480(taille=4) portE/S:a400(taille=16) portE/S:a080(taille=16)
*-scsi:0
identifiant matériel: 1
nom logique: scsi0
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: WDC WD3200BJKT-7
fabriquant: Western Digital
identifiant matériel: 0.0.0
information bus: scsi@0:0.0.0
nom logique: /dev/sda
version: 1A11
numéro de série: WD-WXJ0AC9F5650
taille: 298GiB (320GB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=f1b577d4
*-volume:0
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 1
information bus: scsi@0:0.0.0,1
nom logique: /dev/sda1
nom logique: /
version: 1.0
numéro de série: 69696353-646f-4a5a-a465-9f4b43cb2f1c
taille: 16GiB
capacité: 16GiB
fonctionnalités: primary bootable journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2014-11-29 14:44:38 filesystem=ext4 lastmountpoint=/ modified=2016-09-30 22:32:10 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2016-09-30 08:57:23 state=mounted
*-volume:1
description: Linux swap volume
identifiant matériel: 2
information bus: scsi@0:0.0.0,2
nom logique: /dev/sda2
version: 1
numéro de série: 1380cebd-b10c-4a34-a989-cad6e1646e93
taille: 954MiB
capacité: 954MiB
fonctionnalités: primary nofs swap initialized
configuration: filesystem=swap pagesize=4096
*-volume:2
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 3
information bus: scsi@0:0.0.0,3
nom logique: /dev/sda3
nom logique: /home
version: 1.0
numéro de série: 0cc73832-7f5d-499a-ab02-cc2001ff8a09
taille: 280GiB
capacité: 280GiB
fonctionnalités: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration: created=2014-11-29 14:44:41 filesystem=ext4 lastmountpoint=/home modified=2016-09-30 20:32:21 mount.fstype=ext4 mount.options=rw,relatime,data=ordered mounted=2016-09-30 20:32:21 state=mounted
*-scsi:1
identifiant matériel: 2
nom logique: scsi1
fonctionnalités: emulated
*-cdrom
description: DVD-RAM writer
produit: CDDVDW TS-L633A
fabriquant: TSSTcorp
identifiant matériel: 0.0.0
information bus: scsi@1:0.0.0
nom logique: /dev/cdrom
nom logique: /dev/cdrw
nom logique: /dev/dvd
nom logique: /dev/dvdrw
nom logique: /dev/sr0
version: AS00
fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=nodisc
*-battery
description: Autre Battery
produit: M70--26
fabriquant: AS010IK43F
identifiant matériel: 1
version: 08/12/05
numéro de série: 3488
emplacement: In the back
capacité: 5000mWh
configuration: voltage=14,8V
gilles@altec:~$ Hors ligne
#22 Le 30/09/2016, à 21:33
- moko138
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
En #1, tu n'avais que des noyaux 4.4.0
En #16, on lit :
0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-95-generic???
Peux-tu montrer
ls -l /usr/srcet
ls -l /lib/modules%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#23 Le 30/09/2016, à 21:38
- nilimo
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
Pour info, je n'ai qu'un écran (c'est un PC portable), par contre j'ai en ce moment un disque externe Toshiba de branché sur un port USB qui me sert pour mes sauvegardes.
Hors ligne
#24 Le 30/09/2016, à 21:41
- nilimo
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
gilles@altec:~$ ls -l /usr/src
total 16
drwxr-xr-x 27 root root 4096 sept. 17 15:31 linux-headers-4.4.0-36
drwxr-xr-x 7 root root 4096 sept. 17 15:31 linux-headers-4.4.0-36-generic
drwxr-xr-x 27 root root 4096 sept. 21 08:36 linux-headers-4.4.0-38
drwxr-xr-x 7 root root 4096 sept. 21 08:36 linux-headers-4.4.0-38-generic
gilles@altec:~$ Hors ligne
#25 Le 30/09/2016, à 21:43
- nilimo
Re : [Résolu] Espace insuffisant du repertoire Racine - r592 et R5C592
gilles@altec:~$ ls -l /lib/modules
total 8
drwxr-xr-x 5 root root 4096 sept. 17 18:40 4.4.0-36-generic
drwxr-xr-x 5 root root 4096 sept. 21 08:37 4.4.0-38-generic
gilles@altec:~$ Hors ligne