#1 Le 30/08/2016, à 13:28
- gloub
démarrage ubuntu 16.04 LTS très lent
Bonjour,
Depuis la mise à niveau de mon ubuntu vers la dernière version, je constate un boot extrêmement lent.
En consultant le forum, j'ai vu que vous conseillez de faire un "système.info". Après l'avoir fait une url m'a été communiquée pour la transmettre aux spécialistes du forum. La voici:
http://paste2.org/bxeFVNLx
J'espère que vous parviendrez à trouver une solution à mon problème
D'avance merci.
Cordielement
mg
Ma config:
HP-Compaq-dc5700-Microtower
mémoire: 2,9 Gio
Processeur: Intel® Core™2 CPU 6300 @ 1.86GHz × 2
Carte graphique: Intel® 965Q x86/MMX/SSE2
Type de sytèeme d'exploitation: 32 bits
Disque: 981,2 Go
Hors ligne
#2 Le 30/08/2016, à 19:47
- Compte anonymisé
Re : démarrage ubuntu 16.04 LTS très lent
C'est étrange ça; que dit ceci ?
systemd-analyze ; systemd-analyze blame | head#3 Le 30/08/2016, à 20:10
- gloub
Re : démarrage ubuntu 16.04 LTS très lent
Bonsoir glip,
Merci pour ta réponse .
Ta ligne de code renvoie:
michel@michel-HP-Compaq-dc5700-Microtower:~$ systemd-analyze ; systemd-analyze blame | head
Startup finished in 3.777s (kernel) + 50.764s (userspace) = 54.542s
13.944s nmbd.service
13.901s winbind.service
13.334s samba-ad-dc.service
11.691s networking.service
11.364s speech-dispatcher.service
9.977s dev-sda1.device
9.589s apparmor.service
8.907s NetworkManager-wait-online.service
8.095s grub-common.service
8.008s apache2.service
J'espère que cela t'aidera que cela t'aidera
Cordialement
gloub
Hors ligne
#4 Le 30/08/2016, à 20:16
- Compte anonymisé
Re : démarrage ubuntu 16.04 LTS très lent
gloub a écrit :
Startup finished in 3.777s (kernel) + 50.764s (userspace) = 54.542s
Pô pô pô....
Pour donner un point de repère, KDE5 proprement installé sur un AMD sempron avec 2Go RAM, ça donne....
Startup finished in 2.262s (kernel) + 1.487s (userspace) = 3.750s
Tu peux voir dans un premier temps avec dmesg s'il n'y aurait pas un gros truc qui coince au démarrage.
Enfin, il semble que tu as beaucoup de quincaillerie installée quand-même, donc peut-être pas si anormal, si tu as bien besoin de tout ça:
13.9s nmbd.service
13.9s winbind.service
13.3s samba-ad-dc.service
11.6s networking.service # ==>>> ça semble bien long ça, + 9 sec de Network après ??? (500 ms chez moi)
11.3s speech-dispatcher.service
9.9s dev-sda1.device # =>> pourquoi 9 secondes ?????
9.5s apparmor.service
8.9s NetworkManager-wait-online.service
8.0s grub-common.service
8.0s apache2.service
Tout est très lent quoi.
Dernière modification par Compte anonymisé (Le 30/08/2016, à 20:39)
#5 Le 30/08/2016, à 20:26
- gloub
Re : démarrage ubuntu 16.04 LTS très lent
Voilà ce que renvoie dmesg.
michel@michel-HP-Compaq-dc5700-Microtower:~$ systemd-analyze ; systemd-analyze blame | head
Startup finished in 3.777s (kernel) + 50.764s (userspace) = 54.542s
13.944s nmbd.service
13.901s winbind.service
13.334s samba-ad-dc.service
11.691s networking.service
11.364s speech-dispatcher.service
9.977s dev-sda1.device
9.589s apparmor.service
8.907s NetworkManager-wait-online.service
8.095s grub-common.service
8.008s apache2.service
michel@michel-HP-Compaq-dc5700-Microtower:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-36-generic (buildd@lcy01-32) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #55-Ubuntu SMP Thu Aug 11 18:00:59 UTC 2016 (Ubuntu 4.4.0-36.55-generic 4.4.16)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf7b1cff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf7b1d00-0x00000000bf7b3cff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7b3d00-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Hewlett-Packard HP Compaq dc5700 Microtower/0A60h, BIOS 786E2 v02.03 01/05/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xbf7b1 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E3FFF write-protect
[ 0.000000] E4000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 3064M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC
[ 0.000000] found SMP MP-table at [mem 0x000f9bf0-0x000f9bff] mapped at [c00f9bf0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x021fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x01d52000, 0x01d52fff] PGTABLE
[ 0.000000] BRK [0x01d53000, 0x01d53fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33c7a000-0x35e34fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000E7610 000014 (v00 COMPAQ)
[ 0.000000] ACPI: RSDT 0x00000000BF7C3D40 000040 (v01 HPQOEM SLIC-BPC 20070105 00000000)
[ 0.000000] ACPI: FACP 0x00000000BF7C3DE8 000074 (v01 COMPAQ BROADH2O 00000001 00000000)
[ 0.000000] ACPI: DSDT 0x00000000BF7C4143 009693 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x00000000BF7C3D00 000040
[ 0.000000] ACPI: APIC 0x00000000BF7C3E5C 000068 (v01 COMPAQ BROADH2O 00000001 00000000)
[ 0.000000] ACPI: ASF! 0x00000000BF7C3EC4 000063 (v32 COMPAQ BROADH2O 00000001 00000000)
[ 0.000000] ACPI: MCFG 0x00000000BF7C3F27 00003C (v01 COMPAQ BROADH2O 00000001 00000000)
[ 0.000000] ACPI: TCPA 0x00000000BF7C3F63 000032 (v01 COMPAQ BROADH2O 00000001 00000000)
[ 0.000000] ACPI: SLIC 0x00000000BF7C3F95 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
[ 0.000000] ACPI: HPET 0x00000000BF7C410B 000038 (v01 COMPAQ BROADH2O 00000001 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2171MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x0000000037bfdfff]
[ 0.000000] HighMem [mem 0x0000000037bfe000-0x00000000bf7b0fff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf7b0fff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bf7b0fff]
[ 0.000000] On node 0 totalpages: 784207
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 2190 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 555955 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics stolen memory at 0xbf800000-0xbfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
[ 0.000000] e820: [mem 0xc0000000-0xf3ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 19 pages/cpu @f62b1000 s47436 r0 d30388 u77824
[ 0.000000] pcpu-alloc: s47436 r0 d30388 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 781977
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-36-generic root=UUID=e0c95048-6a50-4988-9de0-976f5057dd60 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00037bfe:000bf7b1)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 3056740K/3136828K available (7888K kernel code, 763K rwdata, 3136K rodata, 940K init, 800K bss, 80088K reserved, 0K cma-reserved, 2223820K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1b86000 - 0xc1c71000 ( 940 kB)
.data : 0xc17b4393 - 0xc1b84d40 (3906 kB)
.text : 0xc1000000 - 0xc17b4393 (7888 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:440 16
[ 0.000000] CPU 0 irqstacks, hard=f3038000 soft=f303a000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 3145728 bytes of page_ext
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1862.162 MHz processor
[ 0.004016] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.32 BogoMIPS (lpj=7448648)
[ 0.004021] pid_max: default: 32768 minimum: 301
[ 0.004035] ACPI: Core revision 20150930
[ 0.009098] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.009124] Security Framework initialized
[ 0.009128] Yama: becoming mindful.
[ 0.009156] AppArmor: AppArmor initialized
[ 0.009206] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.009210] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.009542] Initializing cgroup subsys io
[ 0.009548] Initializing cgroup subsys memory
[ 0.009558] Initializing cgroup subsys devices
[ 0.009563] Initializing cgroup subsys freezer
[ 0.009567] Initializing cgroup subsys net_cls
[ 0.009571] Initializing cgroup subsys perf_event
[ 0.009575] Initializing cgroup subsys net_prio
[ 0.009579] Initializing cgroup subsys hugetlb
[ 0.009583] Initializing cgroup subsys pids
[ 0.009610] CPU: Physical Processor ID: 0
[ 0.009612] CPU: Processor Core ID: 0
[ 0.009619] mce: CPU supports 6 MCE banks
[ 0.009631] CPU0: Thermal monitoring enabled (TM2)
[ 0.009636] process: using mwait in idle threads
[ 0.009646] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.009648] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.010302] Freeing SMP alternatives memory: 28K (c1c71000 - c1c78000)
[ 0.015212] ftrace: allocating 31284 entries in 62 pages
[ 0.024111] smpboot: Max logical packages: 1
[ 0.024115] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.024120] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024491] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068000] smpboot: CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz (family: 0x6, model: 0xf, stepping: 0x6)
[ 0.068000] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.068000] core: PEBS disabled due to CPU errata
[ 0.068000] ... version: 2
[ 0.068000] ... bit width: 40
[ 0.068000] ... generic registers: 2
[ 0.068000] ... value mask: 000000ffffffffff
[ 0.068000] ... max period: 000000007fffffff
[ 0.068000] ... fixed-purpose events: 3
[ 0.068000] ... event mask: 0000000700000003
[ 0.068000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.068000] CPU 1 irqstacks, hard=f288e000 soft=f2890000
[ 0.068000] x86: Booting SMP configuration:
[ 0.068000] .... node #0, CPUs: #1
[ 0.008000] Initializing CPU#1
[ 0.068044] x86: Booted up 1 node, 2 CPUs
[ 0.068049] smpboot: Total of 2 processors activated (7448.64 BogoMIPS)
[ 0.069433] devtmpfs: initialized
[ 0.069433] evm: security.selinux
[ 0.069433] evm: security.SMACK64
[ 0.069433] evm: security.SMACK64EXEC
[ 0.069433] evm: security.SMACK64TRANSMUTE
[ 0.069433] evm: security.SMACK64MMAP
[ 0.069433] evm: security.ima
[ 0.069433] evm: security.capability
[ 0.069433] PM: Registering ACPI NVS region [mem 0xbf7b1d00-0xbf7b3cff] (8192 bytes)
[ 0.069433] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[ 0.069433] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.069433] pinctrl core: initialized pinctrl subsystem
[ 0.069433] RTC time: 17:55:41, date: 08/30/16
[ 0.069433] NET: Registered protocol family 16
[ 0.069433] EISA bus registered
[ 0.080007] cpuidle: using governor ladder
[ 0.088006] cpuidle: using governor menu
[ 0.088012] PCCT header not found.
[ 0.088182] ACPI: bus type PCI registered
[ 0.088186] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.088297] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[ 0.088302] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.088304] PCI: Using MMCONFIG for extended config space
[ 0.088306] PCI: Using configuration type 1 for base access
[ 0.096160] ACPI: Added _OSI(Module Device)
[ 0.096163] ACPI: Added _OSI(Processor Device)
[ 0.096165] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.096167] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.100449] ACPI: Dynamic OEM Table Load:
[ 0.100458] ACPI: SSDT 0x00000000F2833400 000320 (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
[ 0.101039] ACPI: Interpreter enabled
[ 0.101059] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.101065] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.101083] ACPI: (supports S0 S3 S4 S5)
[ 0.101085] ACPI: Using IOAPIC for interrupt routing
[ 0.101123] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.107333] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])ton intérêt
[ 0.107341] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.107349] ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20150930/nsarguments-189)
[ 0.107424] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20150930/dsfield-211)
[ 0.107431] ACPI Error: Method parse/execution failed [\_SB.PCI0._OSC] (Node f308c420), AE_ALREADY_EXISTS (20150930/psparse-542)
[ 0.107445] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
[ 0.107451] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.107864] PCI host bridge to bus 0000:00
[ 0.107869] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff window]
[ 0.107873] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.107876] pci_bus 0000:00: root bus resource [io 0x1000-0x2fff window]
[ 0.107879] pci_bus 0000:00: root bus resource [io 0x3000-0x6fff window]
[ 0.107882] pci_bus 0000:00: root bus resource [io 0x7000-0xafff window]
[ 0.107885] pci_bus 0000:00: root bus resource [io 0xb000-0xffff window]
[ 0.107888] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.107891] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf3ffffff window]
[ 0.107895] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.107906] pci 0000:00:00.0: [8086:2990] type 00 class 0x060000
[ 0.108055] pci 0000:00:02.0: [8086:2992] type 00 class 0x030000
[ 0.108072] pci 0000:00:02.0: reg 0x10: [mem 0xf0400000-0xf04fffff]
[ 0.108086] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.108093] pci 0000:00:02.0: reg 0x20: [io 0x1200-0x1207]
[ 0.108245] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[ 0.108289] pci 0000:00:1a.0: reg 0x20: [io 0x1100-0x111f]
[ 0.108367] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.108437] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[ 0.108481] pci 0000:00:1a.1: reg 0x20: [io 0x1120-0x113f]
[ 0.108558] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.108635] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[ 0.108663] pci 0000:00:1a.7: reg 0x10: [mem 0xf0504000-0xf05043ff]
[ 0.108738] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.108797] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.108870] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.108900] pci 0000:00:1b.0: reg 0x10: [mem 0xf0500000-0xf0503fff 64bit]
[ 0.108966] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.109086] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.109162] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.109224] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.109293] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[ 0.109369] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.109433] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.109507] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.109551] pci 0000:00:1d.0: reg 0x20: [io 0x1140-0x115f]
[ 0.109629] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.109697] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[ 0.109741] pci 0000:00:1d.1: reg 0x20: [io 0x1160-0x117f]
[ 0.109820] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.109888] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[ 0.109932] pci 0000:00:1d.2: reg 0x20: [io 0x1180-0x119f]
[ 0.110009] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.110084] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[ 0.110111] pci 0000:00:1d.7: reg 0x10: [mem 0xf0504400-0xf05047ff]
[ 0.110186] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.110244] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.110315] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.110418] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.110492] pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100
[ 0.110584] pci 0000:00:1f.0: can't claim BAR 13 [io 0xf800-0xf87f]: address conflict with ACPI CPU throttle [io 0xf810-0xf815]
[ 0.110590] pci 0000:00:1f.0: quirk: [io 0xfa00-0xfa3f] claimed by ICH6 GPIO
[ 0.110595] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
[ 0.110599] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f)
[ 0.110604] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
[ 0.110730] pci 0000:00:1f.2: [8086:2820] type 00 class 0x01018a
[ 0.110751] pci 0000:00:1f.2: reg 0x10: [io 0x1208-0x120f]
[ 0.110760] pci 0000:00:1f.2: reg 0x14: [io 0x1228-0x122b]
[ 0.110769] pci 0000:00:1f.2: reg 0x18: [io 0x1210-0x1217]
[ 0.110778] pci 0000:00:1f.2: reg 0x1c: [io 0x122c-0x122f]
[ 0.110787] pci 0000:00:1f.2: reg 0x20: [io 0x11c0-0x11cf]
[ 0.110796] pci 0000:00:1f.2: reg 0x24: [io 0x11d0-0x11df]
[ 0.110808] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.110811] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.110814] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.110816] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.110836] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.110956] pci 0000:00:1f.5: [8086:2825] type 00 class 0x010185
[ 0.110976] pci 0000:00:1f.5: reg 0x10: [io 0x1218-0x121f]
[ 0.110985] pci 0000:00:1f.5: reg 0x14: [io 0x1230-0x1233]
[ 0.110995] pci 0000:00:1f.5: reg 0x18: [io 0x1220-0x1227]
[ 0.111004] pci 0000:00:1f.5: reg 0x1c: [io 0x1234-0x1237]
[ 0.111013] pci 0000:00:1f.5: reg 0x20: [io 0x11e0-0x11ef]
[ 0.111022] pci 0000:00:1f.5: reg 0x24: [io 0x11f0-0x11ff]
[ 0.111050] pci 0000:00:1f.5: PME# supported from D3hot
[ 0.111228] pci 0000:00:1c.0: PCI bridge to [bus 20]
[ 0.111328] pci 0000:3f:00.0: [14e4:167b] type 00 class 0x020000
[ 0.111380] pci 0000:3f:00.0: reg 0x10: [mem 0xf0800000-0xf080ffff 64bit]
[ 0.111503] pci 0000:3f:00.0: PME# supported from D3hot D3cold
[ 0.116021] pci 0000:00:1c.1: PCI bridge to [bus 3f]
[ 0.116030] pci 0000:00:1c.1: bridge window [mem 0xf0600000-0xf08fffff]
[ 0.116134] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.116146] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfebfffff window] (subtractive decode)
[ 0.116150] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.116154] pci 0000:00:1e.0: bridge window [io 0x1000-0x2fff window] (subtractive decode)
[ 0.116158] pci 0000:00:1e.0: bridge window [io 0x3000-0x6fff window] (subtractive decode)
[ 0.116162] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff window] (subtractive decode)
[ 0.116165] pci 0000:00:1e.0: bridge window [io 0xb000-0xffff window] (subtractive decode)
[ 0.116169] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.116173] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xf3ffffff window] (subtractive decode)
[ 0.116192] pci_bus 0000:00: on NUMA node 0
[ 0.116970] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.117065] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.117159] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.117251] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.117346] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.117443] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.117532] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.117619] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.117843] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.117978] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.117978] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.117978] vgaarb: loaded
[ 0.117978] vgaarb: bridge control possible 0000:00:02.0
[ 0.117978] SCSI subsystem initialized
[ 0.117978] libata version 3.00 loaded.
[ 0.117978] ACPI: bus type USB registered
[ 0.117978] usbcore: registered new interface driver usbfs
[ 0.117978] usbcore: registered new interface driver hub
[ 0.117978] usbcore: registered new device driver usb
[ 0.117978] PCI: Using ACPI for IRQ routing
[ 0.120321] PCI: pci_cache_line_size set to 64 bytes
[ 0.120368] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.120371] e820: reserve RAM buffer [mem 0xbf7b1d00-0xbfffffff]
[ 0.120556] NetLabel: Initializing
[ 0.120558] NetLabel: domain hash size = 128
[ 0.120560] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.120575] NetLabel: unlabeled traffic allowed by default
[ 0.120612] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.120612] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.120612] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.122162] amd_nb: Cannot enumerate AMD northbridges
[ 0.122162] clocksource: Switched to clocksource hpet
[ 0.132762] AppArmor: AppArmor Filesystem Enabled
[ 0.132881] pnp: PnP ACPI init
[ 0.132996] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.133049] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 0.133097] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.133427] pnp 00:03: [dma 3]
[ 0.133517] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.133848] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 0.134062] pnp 00:05: [dma 2]
[ 0.134112] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.134466] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.134472] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134559] system 00:07: [io 0x0400-0x041f] has been reserved
[ 0.134563] system 00:07: [io 0x0420-0x043f] has been reserved
[ 0.134566] system 00:07: [io 0x0440-0x045f] has been reserved
[ 0.134570] system 00:07: [io 0x0460-0x047f] has been reserved
[ 0.134573] system 00:07: [io 0x0480-0x048f] has been reserved
[ 0.134576] system 00:07: [io 0x0cb0-0x0cbf] has been reserved
[ 0.134580] system 00:07: [io 0xf800-0xf81f] could not be reserved
[ 0.134584] system 00:07: [io 0xf820-0xf83f] has been reserved
[ 0.134587] system 00:07: [io 0xf840-0xf85f] has been reserved
[ 0.134590] system 00:07: [io 0xf860-0xf87f] has been reserved
[ 0.134594] system 00:07: [io 0xfa00-0xfa3f] has been reserved
[ 0.134597] system 00:07: [io 0xfc00-0xfc7f] has been reserved
[ 0.134600] system 00:07: [io 0xfc80-0xfcff] has been reserved
[ 0.134603] system 00:07: [io 0xfe00-0xfe7f] has been reserved
[ 0.134607] system 00:07: [io 0xfe80-0xfeff] has been reserved
[ 0.134612] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.135040] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.135045] system 00:08: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.135049] system 00:08: [mem 0x000e4000-0x000fffff] could not be reserved
[ 0.135053] system 00:08: [mem 0xfec01000-0xfecfffff] has been reserved
[ 0.135056] system 00:08: [mem 0xfed00400-0xfed3ffff] has been reserved
[ 0.135060] system 00:08: [mem 0xfed40000-0xffffffff] could not be reserved
[ 0.135063] system 00:08: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.135067] system 00:08: [mem 0x000cdc00-0x000e3fff] has been reserved
[ 0.135071] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.135087] pnp: PnP ACPI: found 9 devices
[ 0.135093] PnPBIOS: Disabled by ACPI PNP
[ 0.173071] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.173093] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 20] add_size 1000
[ 0.173099] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 20] add_size 200000 add_align 100000
[ 0.173103] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 20] add_size 200000 add_align 100000
[ 0.173113] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 3f] add_size 1000
[ 0.173117] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3f] add_size 200000 add_align 100000
[ 0.173130] pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment
[ 0.173135] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.173138] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.173142] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.173146] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.173149] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.173153] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.173156] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.173160] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.173163] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.173166] pci 0000:00:1c.1: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.173174] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff]
[ 0.173181] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.173187] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8400000-0xf85fffff 64bit pref]
[ 0.173192] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.173197] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.173202] pci 0000:00:1c.0: PCI bridge to [bus 20]
[ 0.173206] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.173211] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff]
[ 0.173216] pci 0000:00:1c.0: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.173223] pci 0000:00:1c.1: PCI bridge to [bus 3f]
[ 0.173227] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.173232] pci 0000:00:1c.1: bridge window [mem 0xf0600000-0xf08fffff]
[ 0.173237] pci 0000:00:1c.1: bridge window [mem 0xf8400000-0xf85fffff 64bit pref]
[ 0.173244] pci 0000:00:1e.0: PCI bridge to [bus 07]
[ 0.173257] pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfebfffff window]
[ 0.173260] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7 window]
[ 0.173263] pci_bus 0000:00: resource 6 [io 0x1000-0x2fff window]
[ 0.173266] pci_bus 0000:00: resource 7 [io 0x3000-0x6fff window]
[ 0.173269] pci_bus 0000:00: resource 8 [io 0x7000-0xafff window]
[ 0.173272] pci_bus 0000:00: resource 9 [io 0xb000-0xffff window]
[ 0.173275] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff window]
[ 0.173278] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xf3ffffff window]
[ 0.173281] pci_bus 0000:20: resource 0 [io 0x2000-0x2fff]
[ 0.173284] pci_bus 0000:20: resource 1 [mem 0xf8000000-0xf81fffff]
[ 0.173287] pci_bus 0000:20: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.173290] pci_bus 0000:3f: resource 0 [io 0x3000-0x3fff]
[ 0.173293] pci_bus 0000:3f: resource 1 [mem 0xf0600000-0xf08fffff]
[ 0.173296] pci_bus 0000:3f: resource 2 [mem 0xf8400000-0xf85fffff 64bit pref]
[ 0.173300] pci_bus 0000:07: resource 4 [mem 0xf8000000-0xfebfffff window]
[ 0.173303] pci_bus 0000:07: resource 5 [io 0x0000-0x0cf7 window]
[ 0.173306] pci_bus 0000:07: resource 6 [io 0x1000-0x2fff window]
[ 0.173309] pci_bus 0000:07: resource 7 [io 0x3000-0x6fff window]
[ 0.173312] pci_bus 0000:07: resource 8 [io 0x7000-0xafff window]
[ 0.173315] pci_bus 0000:07: resource 9 [io 0xb000-0xffff window]
[ 0.173318] pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff window]
[ 0.173321] pci_bus 0000:07: resource 11 [mem 0xc0000000-0xf3ffffff window]
[ 0.173364] NET: Registered protocol family 2
[ 0.173608] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.173629] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.173662] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.173705] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.173717] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.173772] NET: Registered protocol family 1
[ 0.173793] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.176134] PCI: CLS 64 bytes, default 64
[ 0.176210] Trying to unpack rootfs image as initramfs...
[ 1.002532] Freeing initrd memory: 34540K (f3c7a000 - f5e35000)
[ 1.002884] Scanning for low memory corruption every 60 seconds
[ 1.003433] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.003482] audit: initializing netlink subsys (disabled)
[ 1.003510] audit: type=2000 audit(1472579742.000:1): initialized
[ 1.003988] Initialise system trusted keyring
[ 1.004189] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.007126] zbud: loaded
[ 1.007277] VFS: Disk quotas dquot_6.6.0
[ 1.007345] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.007792] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.008216] fuse init (API version 7.23)
[ 1.008469] Key type big_key registered
[ 1.008497] Allocating IMA MOK and blacklist keyrings.
[ 1.009071] Key type asymmetric registered
[ 1.009076] Asymmetric key parser 'x509' registered
[ 1.009099] bounce: pool size: 64 pages
[ 1.009160] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.009200] io scheduler noop registered
[ 1.009204] io scheduler deadline registered (default)
[ 1.009264] io scheduler cfq registered
[ 1.009844] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.009856] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.009909] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 1.009911] vesafb: scrolling: redraw
[ 1.009914] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.009933] vesafb: framebuffer at 0xe0000000, mapped to 0xf8600000, using 5120k, total 5120k
[ 1.010098] Console: switching to colour frame buffer device 160x64
[ 1.010142] fb0: VESA VGA frame buffer device
[ 1.010168] intel_idle: does not run on family 6 model 15
[ 1.010287] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.010293] ACPI: Power Button [PBTN]
[ 1.010365] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.010369] ACPI: Power Button [PWRF]
[ 1.010656] GHES: HEST is not enabled!
[ 1.010695] isapnp: Scanning for PnP cards...
[ 1.010798] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.031237] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.033816] Linux agpgart interface v0.103
[ 1.033918] agpgart-intel 0000:00:00.0: Intel 965Q Chipset
[ 1.033937] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.034421] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.034559] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.044034] brd: module loaded
[ 1.045956] loop: module loaded
[ 1.046210] ata_piix 0000:00:1f.2: version 2.13
[ 1.046427] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.200621] scsi host0: ata_piix
[ 1.200756] scsi host1: ata_piix
[ 1.200835] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x11c0 irq 14
[ 1.200841] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x11c8 irq 15
[ 1.201022] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.320569] isapnp: No Plug & Play device found
[ 1.356480] scsi host2: ata_piix
[ 1.356624] scsi host3: ata_piix
[ 1.356705] ata3: SATA max UDMA/133 cmd 0x1218 ctl 0x1230 bmdma 0x11e0 irq 18
[ 1.356709] ata4: SATA max UDMA/133 cmd 0x1220 ctl 0x1234 bmdma 0x11e8 irq 18
[ 1.356857] libphy: Fixed MDIO Bus: probed
[ 1.356861] tun: Universal TUN/TAP device driver, 1.6
[ 1.356863] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.356942] PPP generic driver version 2.4.2
[ 1.357043] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.357050] ehci-pci: EHCI PCI platform driver
[ 1.357266] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.357277] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.357290] ehci-pci 0000:00:1a.7: debug port 1
[ 1.361208] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 1.361223] ehci-pci 0000:00:1a.7: irq 22, io mem 0xf0504000
[ 1.372058] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.372132] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.372136] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.372140] usb usb1: Product: EHCI Host Controller
[ 1.372143] usb usb1: Manufacturer: Linux 4.4.0-36-generic ehci_hcd
[ 1.372147] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.372357] hub 1-0:1.0: USB hub found
[ 1.372368] hub 1-0:1.0: 4 ports detected
[ 1.372755] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.372763] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.372776] ehci-pci 0000:00:1d.7: debug port 1
[ 1.376680] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.376695] ehci-pci 0000:00:1d.7: irq 20, io mem 0xf0504400
[ 1.388073] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.388143] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.388147] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.388151] usb usb2: Product: EHCI Host Controller
[ 1.388154] usb usb2: Manufacturer: Linux 4.4.0-36-generic ehci_hcd
[ 1.388157] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.388357] hub 2-0:1.0: USB hub found
[ 1.388367] hub 2-0:1.0: 6 ports detected
[ 1.388617] ehci-platform: EHCI generic platform driver
[ 1.388636] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.388642] ohci-pci: OHCI PCI platform driver
[ 1.388660] ohci-platform: OHCI generic platform driver
[ 1.388675] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.388860] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.388868] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.388876] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.388895] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001100
[ 1.388954] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.388958] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.388961] usb usb3: Product: UHCI Host Controller
[ 1.388964] usb usb3: Manufacturer: Linux 4.4.0-36-generic uhci_hcd
[ 1.388967] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.389136] hub 3-0:1.0: USB hub found
[ 1.389146] hub 3-0:1.0: 2 ports detected
[ 1.389465] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.389474] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.389482] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 1.389513] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001120
[ 1.389570] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.389574] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.389577] usb usb4: Product: UHCI Host Controller
[ 1.389580] usb usb4: Manufacturer: Linux 4.4.0-36-generic uhci_hcd
[ 1.389582] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.389749] hub 4-0:1.0: USB hub found
[ 1.389758] hub 4-0:1.0: 2 ports detected
[ 1.390072] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.390080] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.390087] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.390106] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001140
[ 1.390164] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.390167] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.390170] usb usb5: Product: UHCI Host Controller
[ 1.390173] usb usb5: Manufacturer: Linux 4.4.0-36-generic uhci_hcd
[ 1.390176] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.390341] hub 5-0:1.0: USB hub found
[ 1.390351] hub 5-0:1.0: 2 ports detected
[ 1.390666] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.390674] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.390681] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.390700] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001160
[ 1.390758] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.390761] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.390764] usb usb6: Product: UHCI Host Controller
[ 1.390767] usb usb6: Manufacturer: Linux 4.4.0-36-generic uhci_hcd
[ 1.390770] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.390936] hub 6-0:1.0: USB hub found
[ 1.390946] hub 6-0:1.0: 2 ports detected
[ 1.391258] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.391269] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.391276] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.391295] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001180
[ 1.391353] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.391357] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.391360] usb usb7: Product: UHCI Host Controller
[ 1.391362] usb usb7: Manufacturer: Linux 4.4.0-36-generic uhci_hcd
[ 1.391365] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.391535] hub 7-0:1.0: USB hub found
[ 1.391544] hub 7-0:1.0: 2 ports detected
[ 1.391789] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 1.394793] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.394800] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.395021] mousedev: PS/2 mouse device common for all mice
[ 1.395236] rtc_cmos 00:00: RTC can wake from S4
[ 1.395379] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 1.395403] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.395417] i2c /dev entries driver
[ 1.395511] device-mapper: uevent: version 1.0.3
[ 1.395619] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.395662] platform eisa.0: Probing EISA bus 0
[ 1.395666] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.395669] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.395672] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.395675] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.395678] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.395681] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.395683] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.395686] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.395689] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.395692] platform eisa.0: EISA: Detected 0 cards
[ 1.395714] cpufreq-nforce2: No nForce2 chipset.
[ 1.395725] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.396184] NET: Registered protocol family 10
[ 1.396552] NET: Registered protocol family 17
[ 1.396569] Key type dns_resolver registered
[ 1.396910] microcode: CPU0 sig=0x6f6, pf=0x1, revision=0x44
[ 1.396918] microcode: CPU1 sig=0x6f6, pf=0x1, revision=0x44
[ 1.396974] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.396988] Using IPI No-Shortcut mode
[ 1.397212] registered taskstats version 1
[ 1.397232] Loading compiled-in X.509 certificates
[ 1.401676] Loaded X.509 cert 'Build time autogenerated kernel key: 0a5ec68fde092aeb3fcffc0f02a466d00491fe45'
[ 1.401704] zswap: loaded using pool lzo/zbud
[ 1.405726] Key type trusted registered
[ 1.412865] Key type encrypted registered
[ 1.412874] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.412879] ima: No TPM chip found, activating TPM-bypass!
[ 1.412907] evm: HMAC attrs: 0x1
[ 1.413209] Magic number: 12:960:947
[ 1.413260] tty tty4: hash matches
[ 1.413282] memory memory0: hash matches
[ 1.413318] rtc_cmos 00:00: setting system clock to 2016-08-30 17:55:42 UTC (1472579742)
[ 1.414890] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.414893] EDD information not available.
[ 1.414976] PM: Hibernation image not present or could not be loaded.
[ 1.686658] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.697288] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.884058] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 1.996085] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.996099] ata1.01: SATA link down (SStatus 4 SControl 300)
[ 1.996216] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.996231] ata2.01: SATA link down (SStatus 4 SControl 300)
[ 1.996242] ata2.01: link offline, clearing class 3 to NONE
[ 2.000072] tsc: Refined TSC clocksource calibration: 1862.018 MHz
[ 2.000078] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x35ae082c696, max_idle_ns: 881590705339 ns
[ 2.004316] ata1.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[ 2.004320] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.008167] ata2.00: ATAPI: HL-DT-STDVD+-RW GSA-H31L, 1.05, max UDMA/100
[ 2.012289] ata1.00: configured for UDMA/133
[ 2.012438] scsi 0:0:0:0: Direct-Access ATA WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[ 2.012690] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.012694] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.012756] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.012760] sd 0:0:0:0: [sda] Write Protect is off
[ 2.012764] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.012793] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.024174] ata2.00: configured for UDMA/100
[ 2.027508] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H31L 1.05 PQ: 0 ANSI: 5
[ 2.039039] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.039043] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.039250] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.039355] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.051622] sda: sda1 sda2 < sda5 >
[ 2.052115] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.052468] Freeing unused kernel memory: 940K (c1b86000 - c1c71000)
[ 2.052561] Write protecting the kernel text: 7892k
[ 2.052607] Write protecting the kernel read-only data: 3140k
[ 2.052609] NX-protecting the kernel data: 6444k
[ 2.057066] usb 5-1: New USB device found, idVendor=03f0, idProduct=a407
[ 2.057071] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.057074] usb 5-1: Product: HP Link-5 micro dongle
[ 2.057077] usb 5-1: Manufacturer: HP
[ 2.069140] random: systemd-udevd urandom read with 11 bits of entropy available
[ 2.144045] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[ 2.164524] [drm] Initialized drm 1.1.0 20060810
[ 2.170107] wmi: Mapper loaded
[ 2.186682] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 2.254295] usb 2-5: new high-speed USB device number 4 using ehci-pci
[ 2.280138] [drm] Memory usable by graphics device = 512M
[ 2.280145] checking generic (e0000000 500000) vs hw (e0000000 10000000)
[ 2.280147] fb: switching to inteldrmfb from VESA VGA
[ 2.280193] Console: switching to colour dummy device 80x25
[ 2.280301] [drm] Replacing VGA console driver
[ 2.284172] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.284176] [drm] Driver supports precise vblank timestamp query.
[ 2.286035] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.297640] pps_core: LinuxPPS API ver. 1 registered
[ 2.297645] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.303002] FDC 0 is a post-1991 82077
[ 2.304361] PTP clock support registered
[ 2.307915] [drm] initialized overlay support
[ 2.317087] usb 6-1: New USB device found, idVendor=046d, idProduct=c52b
[ 2.317093] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.317096] usb 6-1: Product: USB Receiver
[ 2.317099] usb 6-1: Manufacturer: Logitech
[ 2.324743] tg3.c:v3.137 (May 11, 2014)
[ 2.340013] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.370171] usbcore: registered new interface driver usbhid
[ 2.370176] usbhid: USB HID core driver
[ 2.372273] tg3 0000:3f:00.0 eth0: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 00:19:bb:4a:bd:db
[ 2.372278] tg3 0000:3f:00.0 eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.372282] tg3 0000:3f:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.372286] tg3 0000:3f:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.398225] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20150930/video-1216)
[ 2.398235] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
[ 2.398399] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 2.403679] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 2.407362] usb 2-5: New USB device found, idVendor=0bda, idProduct=0111
[ 2.407367] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.407371] usb 2-5: Product: USB2.0-CRW
[ 2.407374] usb 2-5: Manufacturer: Generic
[ 2.407377] usb 2-5: SerialNumber: 20021111153705700
[ 2.407599] fbcon: inteldrmfb (fb0) is primary device
[ 2.407719] Console: switching to colour frame buffer device 210x65
[ 2.407775] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.683973] input: HP HP Link-5 micro dongle as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:03F0:A407.0001/input/input6
[ 2.690376] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input2
[ 2.718076] usb-storage 2-5:1.0: USB Mass Storage device detected
[ 2.718468] scsi host4: usb-storage 2-5:1.0
[ 2.718599] usbcore: registered new interface driver usb-storage
[ 2.724672] usbcore: registered new interface driver uas
[ 2.736246] hid-generic 0003:03F0:A407.0001: input,hidraw1: USB HID v1.11 Keyboard [HP HP Link-5 micro dongle] on usb-0000:00:1d.0-1/input0
[ 2.738156] input: HP HP Link-5 micro dongle as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/0003:03F0:A407.0002/input/input7
[ 2.792389] hid-generic 0003:03F0:A407.0002: input,hiddev0,hidraw2: USB HID v1.11 Mouse [HP HP Link-5 micro dongle] on usb-0000:00:1d.0-1/input1
[ 2.871221] input: Logitech M215 2nd Gen as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.2/0003:046D:C52B.0005/0003:046D:401B.0006/input/input8
[ 2.872002] logitech-hidpp-device 0003:046D:401B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M215 2nd Gen] on usb-0000:00:1d.1-1:1
[ 2.879600] input: Logitech K330 as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.2/0003:046D:C52B.0005/0003:046D:4016.0007/input/input9
[ 2.879986] logitech-hidpp-device 0003:046D:4016.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K330] on usb-0000:00:1d.1-1:2
[ 3.000125] clocksource: Switched to clocksource tsc
[ 3.110500] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.722764] scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 4.160650] random: nonblocking pool is initialized
[ 4.225150] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 4.225325] systemd[1]: Detected architecture x86.
[ 4.242509] systemd[1]: Set hostname to <michel-HP-Compaq-dc5700-Microtower>.
[ 4.688520] scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 4.694631] scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 4.700755] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 4.701146] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 4.701398] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 4.701636] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 4.701891] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 4.705375] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 4.706248] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 4.710622] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 4.711497] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 6.400033] systemd[1]: Listening on Journal Audit Socket.
[ 6.400130] systemd[1]: Reached target Remote File Systems (Pre).
[ 6.400206] systemd[1]: Listening on Journal Socket.
[ 6.400270] systemd[1]: Listening on udev Control Socket.
[ 6.400468] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.400493] systemd[1]: Reached target Remote File Systems.
[ 6.400629] systemd[1]: Created slice User and Session Slice.
[ 6.400694] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.400738] systemd[1]: Listening on Syslog Socket.
[ 6.400791] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 6.400810] systemd[1]: Reached target Encrypted Volumes.
[ 6.400850] systemd[1]: Listening on udev Kernel Socket.
[ 6.400961] systemd[1]: Created slice System Slice.
[ 6.420193] systemd[1]: Started Read required files in advance.
[ 6.420460] systemd[1]: Reached target Slices.
[ 6.421241] systemd[1]: Mounting Debug File System...
[ 6.421985] systemd[1]: Starting Set console keymap...
[ 6.632220] systemd[1]: Starting Load Kernel Modules...
[ 6.632997] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.633041] systemd[1]: Reached target User and Group Name Lookups.
[ 6.633146] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.633218] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 6.634008] systemd[1]: Starting Uncomplicated firewall...
[ 6.635067] systemd[1]: Mounting Huge Pages File System...
[ 6.635879] systemd[1]: Started Braille Device Support.
[ 6.828245] systemd[1]: Starting Journal Service...
[ 6.829191] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.114400] systemd[1]: Started Uncomplicated firewall.
[ 7.173755] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 7.188296] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 7.335271] systemd[1]: Mounted Debug File System.
[ 7.335330] systemd[1]: Mounted Huge Pages File System.
[ 7.335360] systemd[1]: Mounted POSIX Message Queue File System.
[ 7.375089] lp: driver loaded but no devices found
[ 7.454402] ppdev: user-space parallel port driver
[ 7.514661] parport_pc 00:03: reported by Plug and Play ACPI
[ 7.514735] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 7.535051] parport0: Printer, HEWLETT-PACKARD DESKJET 930C
[ 7.535191] lp0: using parport0 (interrupt-driven).
[ 7.581586] systemd[1]: Started Load Kernel Modules.
[ 7.592296] systemd[1]: Starting Apply Kernel Variables...
[ 7.593113] systemd[1]: Mounting FUSE Control File System...
[ 7.597783] systemd[1]: Mounted FUSE Control File System.
[ 8.191411] systemd[1]: Started Apply Kernel Variables.
[ 8.203452] systemd[1]: Started Journal Service.
[ 11.771955] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 12.354464] systemd-journald[755]: Received request to flush runtime journal from PID 1
[ 13.883989] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.954873] gpio_ich: GPIO from 462 to 511 on gpio_ich
[ 15.201793] kvm: disabled by bios
[ 15.245256] input: HP WMI hotkeys as /devices/virtual/input/input10
[ 15.359481] coretemp coretemp.0: Using relative temperature scale!
[ 15.359504] coretemp coretemp.0: Using relative temperature scale!
[ 15.840001] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC260: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line
[ 15.840024] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x11/0x0/0x0/0x0/0x0)
[ 15.840028] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x10/0x0/0x0/0x0/0x0)
[ 15.840031] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 15.840034] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 15.840037] snd_hda_codec_realtek hdaudioC0D0: Mic=0x14
[ 15.840040] snd_hda_codec_realtek hdaudioC0D0: Line=0x13
[ 15.840043] snd_hda_codec_realtek hdaudioC0D0: Aux=0xf
[ 15.847467] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 15.847589] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 15.850305] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 15.850450] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 17.023127] Adding 3135484k swap on /dev/sda5. Priority:-1 extents:1 across:3135484k FS
[ 19.963689] audit: type=1400 audit(1472579761.046:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=2007 comm="apparmor_parser"
[ 19.963704] audit: type=1400 audit(1472579761.046:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2007 comm="apparmor_parser"
[ 19.963713] audit: type=1400 audit(1472579761.046:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=2007 comm="apparmor_parser"
[ 19.963721] audit: type=1400 audit(1472579761.046:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2007 comm="apparmor_parser"
[ 20.202181] audit: type=1400 audit(1472579761.282:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=2006 comm="apparmor_parser"
[ 20.202197] audit: type=1400 audit(1472579761.282:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=2006 comm="apparmor_parser"
[ 20.657916] audit: type=1400 audit(1472579761.742:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=2011 comm="apparmor_parser"
[ 20.657933] audit: type=1400 audit(1472579761.742:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=2011 comm="apparmor_parser"
[ 20.820869] audit: type=1400 audit(1472579761.906:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=2012 comm="apparmor_parser"
[ 21.035143] audit: type=1400 audit(1472579762.114:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=2009 comm="apparmor_parser"
[ 22.793165] cgroup: new mount options do not match the existing superblock, will be ignored
[ 33.288666] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 33.336123] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.948305] tg3 0000:3f:00.0 eth0: Link is up at 100 Mbps, full duplex
[ 34.948313] tg3 0000:3f:00.0 eth0: Flow control is on for TX and on for RX
[ 34.948360] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 569.292473] perf interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
michel@michel-HP-Compaq-dc5700-Microtower:~$ Merci pour ton aide
Cordialement
gloub
Modération : merci à l'avenir d'utiliser les balises code (explications ici).
Dernière modification par cqfd93 (Le 30/08/2016, à 21:07)
Hors ligne
#6 Le 30/08/2016, à 20:31
- Compte anonymisé
Re : démarrage ubuntu 16.04 LTS très lent
Heu la sortie de dmesg, c'était pour toi,... parce-que ici , sans balise code, ça fait un peu long non ?
Ma question plus haut est de savoir déjà si tu as vraiment besoin d'autant de quincaillerie', et pourquoi tout est très long concernant ne serait que le montage de ta partition sda1, et networking.
On dirait une usine à gaz.
#7 Le 30/08/2016, à 20:46
- gloub
Re : démarrage ubuntu 16.04 LTS très lent
A vrai dire j'avais compris que tu voulais que je tape dmesg dans le terminal et que je t'envoie la réponse. Excuse moi.
Je ne suis pas doué du tout et je ne visite que très rarement le forum. Mais là je suis dans la mouise. Je ne comprends pas ce que tu entends par quincaillerie, ni par montage de ma partition sda1 et networking.
Au départ j'ai installé ubuntu 15.04 sur un disque dur neuf en demandant que l'installation occupe le disque entier. Par la suite, j'ai toujours accepté les mise à jour. La dernière me proposait une mise à niveau vers la version 16.04. J'ai accepté. Cela a bien fonctionné pendant plusieurs jours et subitement tout est devenu lent sans que j'aie rajouté de logiciels. Comme tu dis , ça coince dans les tuyaux et je suis parfaitement incompétent pour m'en sortir tout seul.
j'ai essayé de recommencer l'installation, mais ça a coincé au niveau du boot.
Je en sais vraiment pas que faire.
Hors ligne
#8 Le 30/08/2016, à 21:05
- gloub
Re : démarrage ubuntu 16.04 LTS très lent
Rebonsoir glip,
Je te propose de ne pas te prendre la tête plus longtemps. Je vais tout reformater et réinstaller.
En tout cas merci à toi.
Bonne soirée.
Bien cordialement
gloub
Hors ligne
#9 Le 30/08/2016, à 21:11
- Compte anonymisé
Re : démarrage ubuntu 16.04 LTS très lent
Ton message 5, tu peux l'éditer pour mettre le retour de dmesg entre balises [code] ....mon texte....[/code] ( ou le supprimer si tu veux / rien bu d'intéressant).
Et tu as que linux sur ton disque ? Aucun windows ou de parttions windows partagées ? Si c'est le cas, tu as plein de trucs activés inutiles.
Et tu utilises bien Apache qui prend 8 secondes ???
Mais ça n’explique pas des timings hyper longs sur des tâches qui devraient être ultra-rapides.
EDIT: ha ben si tu réinstalles, effectivement, tu verras peut-être une différence ( ou pas).
Dernière modification par Compte anonymisé (Le 30/08/2016, à 21:12)
#10 Le 30/08/2016, à 21:12
- littlejohn75
Re : démarrage ubuntu 16.04 LTS très lent
gloup a écrit :
[ 4.225150] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 4.225325] systemd[1]: Detected architecture x86.
[ 4.242509] systemd[1]: Set hostname to <michel-HP-Compaq-dc5700-Microtower>.
Une antiquité qui n'est même pas en 64 bits ?
Pourrait-on avoir un lien vers la description de l'engin ?
13.9s nmbd.service
13.9s winbind.service
13.3s samba-ad-dc.serviceVraiment besoin d'un serveur samba ? contrôleur de domaine ?
Les disques sont longs à monter, donnez nous le retour de
lsblk
df -hT | fgrep -v tmpfs
free -mDe même le réseau est trop long à se mettre en place.
Il y a vraisemblablement un tas de requêtes DNS ou autre
netstat -tapn
hostname --fqdnOn peut toujours se dire que cela ne peut que s'améliorer 
Cordialement,
Regards,
Mit freundlichen Grüßen,
مع تحياتي الخالصة
---
F. Petitjean
« Un ordinateur c'est comme un frigo : on le branche et ça marche. »
Laurent Serano Directeur informatique, réunion Délégués du Personnel 2010
Hors ligne
#11 Le 30/08/2016, à 21:19
- Compte anonymisé
Re : démarrage ubuntu 16.04 LTS très lent
Ce n'est clairement pas le CPU qui peut expliquer une telle lenteur, à moins d'une TRES grosse incompatibilité noyau.
Pour fixer les idées, les tâches les plus longues de mon démarrage (AMD sempron / 2Go RAM / KDE5)
495ms networking.service
337ms accounts-daemon.service
326ms dev-sda3.device
194ms keyboard-setup.service
190ms systemd-fsck@dev-disk-by\x2duuid-8359cdfe\x2d09bc986b1.service
169ms lm-sensors.service
153ms rsyslog.service
152ms alsa-restore.service
144ms udisks2.service
122ms systemd-networkd.service
93ms dev-disk-by\x2duuid-9b683fee\x2dc434\6bed5.swap
Dernière modification par Compte anonymisé (Le 30/08/2016, à 21:41)
#12 Le 18/10/2016, à 08:27
- YvonCédric
Re : démarrage ubuntu 16.04 LTS très lent
Bonjour, je viens d'installer Ubuntu 16 sur mon MacBook Pro en OS unique sur un Disque dur Neuf et tout est super rapide sauf le Démarrage qui luis et vraiment lent.
J'appuie sur le bouton de démarrage.
Rapidement j'ai l'écran qui passe au violet foncé.
Puis rapidement le clavier qui s'allume.
Puis écran noir ...................
Puis très longtemps après (plus d'une minute) mon bureau.
MacBookPro:~$ systemd-analyze ; systemd-analyze blame | head
Startup finished in 4.899s (kernel) + 1min 86ms (userspace) = 1min 4.985s
17.832s apt-daily.service
14.688s NetworkManager-wait-online.service
11.491s nmbd.service
10.876s samba-ad-dc.service
10.770s ModemManager.service
9.032s NetworkManager.service
8.395s grub-common.service
8.332s lightdm.service
7.927s dev-sda2.device
7.287s apparmor.serviceComment puis je améliorer le boot.
J'utilise samba pour mon imprimante et mes NAS qui n'ont pas a se connecter au boot.
Dernière modification par YvonCédric (Le 18/10/2016, à 15:15)
Devise: Le futur de l'Humanité passe par la conquête de l'Espace.
Activité:Technicien multi systèmes.
Hors ligne
#13 Le 18/10/2016, à 16:32
- YvonCédric
Re : démarrage ubuntu 16.04 LTS très lent
Bon j'ai viré ModemManager ça boot un peut mieux si vous avez des idées de services innutiles, je suis prenneur
MacBookPro:~$ systemd-analyze ; systemd-analyze blame | head
Startup finished in 6.463s (kernel) + 55.816s (userspace) = 1min 2.279s
13.924s NetworkManager-wait-online.service
10.769s nmbd.service
10.285s samba-ad-dc.service
9.618s accounts-daemon.service
8.554s lightdm.service
8.093s dev-sda2.device
7.738s NetworkManager.service
7.548s apparmor.service
6.531s colord.service
6.028s plymouth-read-write.serviceDevise: Le futur de l'Humanité passe par la conquête de l'Espace.
Activité:Technicien multi systèmes.
Hors ligne