#1 Le 19/10/2016, à 09:51
- catsey
[Résolu] Démarrage long d'ubuntu 16.04 lts
Bonjour à tous,
Nouvelle discussion inspirée par celle en cours pour environnement Kubuntu et initiée par guy-pierre ici.
@Malbo :
Je me demande si le temps de démarrage de mon Ubuntu est normal et, si oui, s'il n'y a pas moyen d'arranger ça.
Il s'agit à la base d'une version 14.04 lts mise à jour.
J'avais pas mal de résidus de vieux kernels nettoyés à ce jour (avec l'aide du forum, tout débutant que je suis !).
Pour info :
cat@cat-300E4A-300E5A-300E7A-3430EA-3530EA:~$ systemd-analyze ; systemd-analyze blame | head
Startup finished in 5.056s (kernel) + 1min 3.375s (userspace) = 1min 8.431s
40.517s apt-daily.service
15.759s ModemManager.service
12.401s grub-common.service
12.309s dev-sda6.device
11.138s accounts-daemon.service
11.070s networking.service
11.046s apparmor.service
10.224s console-kit-log-system-start.service
10.064s speech-dispatcher.service
10.039s systemd-logind.service
cat@cat-300E4A-300E5A-300E7A-3430EA-3530EA:~$ C'est long, mais après tout, peut-être normal ?
@+
Dernière modification par catsey (Le 10/11/2016, à 01:06)
Cordialement.
Lenovo ideapad 500-15lsk, Ubuntu 16.04 LTS en dual boot Win 10
Samsung NP300E7A, Debian 9.4, Cinnamon 3.2.7 en monoboot
Hors ligne
#2 Le 19/10/2016, à 14:04
- malbo
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
Il manque quelques infos :
1) quel est le nom du modèle de ton ordi et son fabricant ?
2) Je te prie de faire un Boot-Info depuis une session de ton Ubuntu installé et de donner l'URL de ce Boot-Info dans ta réponse.
3) Avec Ubuntu 14.04 que tu avais précédemment, quel était le temps de démarrage mesuré par toi et quel est-il avec Ubuntu 16.04 ?
Dernière modification par malbo (Le 19/10/2016, à 14:04)
Hors ligne
#3 Le 19/10/2016, à 14:28
- catsey
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
(Re) bonjour,
1) quel est le nom du modèle de ton ordi et son fabricant ?
samsung NP300E7A-S0BFR2) Je te prie de faire un Boot-Info depuis une session de ton Ubuntu installé et de donner l'URL de ce Boot-Info dans ta réponse
http://paste2.org/OpwJ44Zd3) Avec Ubuntu 14.04 que tu avais précédemment, quel était le temps de démarrage mesuré par toi et quel est-il avec Ubuntu 16.04 ?
Là je ne sais pas répondre. C’est un ordi que l'on m'a donné. Il était en dual boot win 7/ubuntu 14.04lts dont j'ai fait la mise à niveau. Il était, il me semble, très long à démarrer, peut-être encore plus que maintenant (le nettoyage des résidus de noyaux ont peut-être aidé ? ici).
Si j'en crois l'analyse post #1, il met 1min 8.431s pour démarrer, mais je peux chronométrer si nécessaire.
D'autre part, j'ai tenté un "dmsg" pour voir. Cela ressemble un peu à cet écran qui défile au démarrage (?) et j'ai 14 "warning".
Je fais le test de temps au chrono !
Merci.
Dernière modification par catsey (Le 19/10/2016, à 14:54)
Cordialement.
Lenovo ideapad 500-15lsk, Ubuntu 16.04 LTS en dual boot Win 10
Samsung NP300E7A, Debian 9.4, Cinnamon 3.2.7 en monoboot
Hors ligne
#4 Le 19/10/2016, à 14:52
- catsey
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
Temps d'arrêt : 6s,
Démarrage -> Grub : 7s
Grub -> demande mdp : 59s
mdp -> affichage bureau : 40s
Au total 1mn 46s.
C'est peut-être normal, je n'ai pas de références. La lenteur du win 7 sur cet appareil m'a fait adopter ubuntu.
Cordialement.
Lenovo ideapad 500-15lsk, Ubuntu 16.04 LTS en dual boot Win 10
Samsung NP300E7A, Debian 9.4, Cinnamon 3.2.7 en monoboot
Hors ligne
#5 Le 19/10/2016, à 17:36
- moko138
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
Non, 59" c'est beaucoup,
et 40" idem.
Voici ton boot-info :
Boot Info Script cfd9efe + Boot-Repair extra info [Boot-Info 26Apr2016]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos6)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /BOOT/BCD
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /Windows/System32/winload.exe
sda3: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: According to the info in the boot sector, sda5 starts
at sector 2048.
Operating System:
Boot files:
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda7: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /boot/bcd
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 698.7 GiB, 750156374016 bytes, 1465149168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/sda2 206,848 568,535,039 568,328,192 7 NTFS / exFAT / HPFS
/dev/sda3 568,537,086 1,416,335,359 847,798,274 f W95 Extended (LBA)
/dev/sda5 568,537,088 1,009,343,881 440,806,794 7 NTFS / exFAT / HPFS
/dev/sda6 1,009,344,512 1,408,122,879 398,778,368 83 Linux
/dev/sda7 1,408,124,928 1,416,335,359 8,210,432 82 Linux swap / Solaris
/dev/sda4 1,416,335,360 1,465,147,391 48,812,032 27 Hidden NTFS (Recovery Environment)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 FCF6E16CF6E1279A ntfs SYSTEM
/dev/sda2 38502FF3502FB692 ntfs
/dev/sda4 D60E008D0E0068B7 ntfs SAMSUNG_REC
/dev/sda5 26C464E8C464BBA5 ntfs
/dev/sda6 8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7 ext4
/dev/sda7 5573a968-2f0a-4ef5-a905-467b9fc81adf swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Oct 19 14:14 ata-ST750LM022_HN-M750MBB_S2RRJ9HC400337 -> ../../sda
lrwxrwxrwx 1 root root 10 Oct 19 14:14 ata-ST750LM022_HN-M750MBB_S2RRJ9HC400337-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Oct 19 14:14 ata-ST750LM022_HN-M750MBB_S2RRJ9HC400337-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Oct 19 14:14 ata-ST750LM022_HN-M750MBB_S2RRJ9HC400337-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Oct 19 14:14 ata-ST750LM022_HN-M750MBB_S2RRJ9HC400337-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Oct 19 14:14 ata-ST750LM022_HN-M750MBB_S2RRJ9HC400337-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Oct 19 14:14 ata-ST750LM022_HN-M750MBB_S2RRJ9HC400337-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Oct 19 14:14 ata-ST750LM022_HN-M750MBB_S2RRJ9HC400337-part7 -> ../../sda7
lrwxrwxrwx 1 root root 9 Oct 19 14:14 ata-TSSTcorp_CDDVDW_SN-208BB_R8F96GCC500N23 -> ../../sr0
lrwxrwxrwx 1 root root 9 Oct 19 14:14 wwn-0x50004cf20740fbde -> ../../sda
lrwxrwxrwx 1 root root 10 Oct 19 14:14 wwn-0x50004cf20740fbde-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Oct 19 14:14 wwn-0x50004cf20740fbde-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Oct 19 14:14 wwn-0x50004cf20740fbde-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Oct 19 14:14 wwn-0x50004cf20740fbde-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Oct 19 14:14 wwn-0x50004cf20740fbde-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Oct 19 14:14 wwn-0x50004cf20740fbde-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Oct 19 14:14 wwn-0x50004cf20740fbde-part7 -> ../../sda7
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda6 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
=========================== sda6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7
else
search --no-floppy --fs-uuid --set=root 8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
set linux_gfx_mode=None
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7
else
search --no-floppy --fs-uuid --set=root 8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7
fi
linux /boot/vmlinuz-4.4.0-43-generic root=UUID=8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7 ro
initrd /boot/initrd.img-4.4.0-43-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7' {
menuentry 'Ubuntu, avec Linux 4.4.0-43-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-43-generic-advanced-8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7
else
search --no-floppy --fs-uuid --set=root 8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7
fi
echo 'Chargement de Linux 4.4.0-43-generic…'
linux /boot/vmlinuz-4.4.0-43-generic root=UUID=8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7 ro
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-43-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-43-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-43-generic-init-upstart-8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7
else
search --no-floppy --fs-uuid --set=root 8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7
fi
echo 'Chargement de Linux 4.4.0-43-generic…'
linux /boot/vmlinuz-4.4.0-43-generic root=UUID=8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7 ro init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-43-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-43-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-43-generic-recovery-8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7
else
search --no-floppy --fs-uuid --set=root 8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7
fi
echo 'Chargement de Linux 4.4.0-43-generic…'
linux /boot/vmlinuz-4.4.0-43-generic root=UUID=8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-43-generic
}
menuentry 'Ubuntu, avec Linux 4.4.0-42-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-42-generic-advanced-8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7
else
search --no-floppy --fs-uuid --set=root 8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7
fi
echo 'Chargement de Linux 4.4.0-42-generic…'
linux /boot/vmlinuz-4.4.0-42-generic root=UUID=8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7 ro
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-42-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-42-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-42-generic-init-upstart-8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7
else
search --no-floppy --fs-uuid --set=root 8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7
fi
echo 'Chargement de Linux 4.4.0-42-generic…'
linux /boot/vmlinuz-4.4.0-42-generic root=UUID=8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7 ro init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-42-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-42-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-42-generic-recovery-8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7
else
search --no-floppy --fs-uuid --set=root 8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7
fi
echo 'Chargement de Linux 4.4.0-42-generic…'
linux /boot/vmlinuz-4.4.0-42-generic root=UUID=8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-42-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7
else
search --no-floppy --fs-uuid --set=root 8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7
else
search --no-floppy --fs-uuid --set=root 8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-FCF6E16CF6E1279A' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 FCF6E16CF6E1279A
else
search --no-floppy --fs-uuid --set=root FCF6E16CF6E1279A
fi
parttool ${root} hidden-
chainloader +1
}
menuentry 'Windows Recovery Environment (loader) (sur /dev/sda4)' --class windows --class os $menuentry_id_option 'osprober-chain-D60E008D0E0068B7' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos4 --hint-efi=hd0,msdos4 --hint-baremetal=ahci0,msdos4 D60E008D0E0068B7
else
search --no-floppy --fs-uuid --set=root D60E008D0E0068B7
fi
parttool ${root} hidden-
drivemap -s (hd0) ${root}
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda6 during installation
UUID=8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda7 during installation
UUID=5573a968-2f0a-4ef5-a905-467b9fc81adf none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
586.521999359 = 629.773201408 boot/grub/grub.cfg 1
583.595603943 = 626.631008256 boot/grub/i386-pc/core.img 1
591.908912659 = 635.557355520 boot/vmlinuz-4.4.0-42-generic 1
625.070716858 = 671.164571648 boot/vmlinuz-4.4.0-43-generic 1
625.070716858 = 671.164571648 vmlinuz 1
591.908912659 = 635.557355520 vmlinuz.old 1
624.895156860 = 670.976065536 boot/initrd.img-4.4.0-42-generic 4
625.191009521 = 671.293734912 boot/initrd.img-4.4.0-43-generic 3
625.191009521 = 671.293734912 initrd.img 3
624.895156860 = 670.976065536 initrd.img.old 4
ADDITIONAL INFORMATION :
=================== log of boot-info 2016-10-19__14h14 ===================
boot-info version : 4ppa38
boot-sav version : 4ppa38
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa38
boot-info is executed in installed-session (Ubuntu 16.04.1 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.4.0-43-generic root=UUID=8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7 ro
Partition 3 does not start on physical sector boundary.
=================== os-prober:
/dev/sda6:L'OS actuellement utilisé - Ubuntu 16.04.1 LTS CurrentSession:linux
/dev/sda1:Windows 7 (loader):Windows:chain
/dev/sda4:Windows Recovery Environment (loader):Windows1:chain
=================== blkid:
/dev/sda1: LABEL="SYSTEM" UUID="FCF6E16CF6E1279A" TYPE="ntfs" PARTUUID="3882832c-01"
/dev/sda2: UUID="38502FF3502FB692" TYPE="ntfs" PARTUUID="3882832c-02"
/dev/sda4: LABEL="SAMSUNG_REC" UUID="D60E008D0E0068B7" TYPE="ntfs" PARTUUID="3882832c-04"
/dev/sda5: UUID="26C464E8C464BBA5" TYPE="ntfs" PARTUUID="3882832c-05"
/dev/sda6: UUID="8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7" TYPE="ext4" PARTUUID="3882832c-06"
/dev/sda7: UUID="5573a968-2f0a-4ef5-a905-467b9fc81adf" TYPE="swap" PARTUUID="3882832c-07"
1 disks with OS, 3 OS : 1 Linux, 0 MacOS, 2 Windows, 0 unknown type OS.
Windows not detected by os-prober on sda2.
Partition 3 does not start on physical sector boundary.
Partition 3 does not start on physical sector boundary.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 août 16 20:32 grub.d
total 76
-rwxr-xr-x 1 root root 9791 déc. 17 2015 00_header
-rwxr-xr-x 1 root root 6258 mars 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12261 juil. 23 02:09 10_linux
-rwxr-xr-x 1 root root 11082 juil. 23 02:09 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 avril 11 2014 30_os-prober
-rwxr-xr-x 1 root root 1418 juil. 23 02:09 30_uefi-firmware
-rwxr-xr-x 1 root root 214 oct. 10 2013 40_custom
-rwxr-xr-x 1 root root 216 oct. 10 2013 41_custom
-rw-r--r-- 1 root root 483 oct. 10 2013 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT=""
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
GRUB_GFXPAYLOAD_LINUX=None
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
EFI in dmesg.
[ 0.000000] ACPI: UEFI 0x00000000AAFEA000 00003E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: UEFI 0x00000000AAFE9000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 0x00000000AAFE6000 000256 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda6 : sda, not-sepboot, grubenv-ok grub2, signed grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
sda4 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda4.
sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA ST750LM022 HN-M7 (scsi)
Disk /dev/sda: 750GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 106MB 105MB primary ntfs boot
2 106MB 291GB 291GB primary ntfs
3 291GB 725GB 434GB extended lba
5 291GB 517GB 226GB logical ntfs
6 517GB 721GB 204GB logical ext4
7 721GB 725GB 4204MB logical linux-swap(v1)
4 725GB 750GB 25.0GB primary ntfs diag
=================== parted -lm:
BYT;
/dev/sda:750GB:scsi:512:4096:msdos:ATA ST750LM022 HN-M7:;
1:1049kB:106MB:105MB:ntfs::boot;
2:106MB:291GB:291GB:ntfs::;
3:291GB:725GB:434GB:::lba;
5:291GB:517GB:226GB:ntfs::;
6:517GB:721GB:204GB:ext4::;
7:721GB:725GB:4204MB:linux-swap(v1)::;
4:725GB:750GB:25.0GB:ntfs::diag;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 698,7G
sda1 part ntfs 100M SYSTEM
sda2 part ntfs 271G
sda3 part 1K
sda4 part ntfs 23,3G SAMSUNG_REC
sda5 part ntfs 210,2G
sda6 part ext4 190,2G
sda7 part swap 3,9G
sr0 rom 1024M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0 /mnt/boot-sav/sda2
sda3 1 0 0
sda4 1 0 0 /mnt/boot-sav/sda4
sda5 1 0 0 /mnt/boot-sav/sda5
sda6 1 0 0 /
sda7 1 0 0 [SWAP]
sr0 1 0 1 running
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1958412k,nr_inodes=489603,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=395724k,mode=755)
/dev/sda6 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (rw,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset,clone_children)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb,release_agent=/run/cgmanager/agents/cgm-release-agent.hugetlb)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids,release_agent=/run/cgmanager/agents/cgm-release-agent.pids)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event,release_agent=/run/cgmanager/agents/cgm-release-agent.perf_event)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=33,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
cgmfs on /run/cgmanager/fs type tmpfs (rw,relatime,size=100k,mode=755)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=395724k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): adsp autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 dsp dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hpet hugepages hwrng i2c-0 i2c-1 i2c-10 i2c-11 i2c-12 i2c-13 i2c-14 i2c-15 i2c-16 i2c-17 i2c-18 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mixer mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
ls: impossible d'accéder à '': Aucun fichier ou dossier de ce type
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 1f 03 00 00 00 00 00 |................|
00000030 55 21 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |U!..............|
00000040 f6 00 00 00 01 00 00 00 9a 27 e1 f6 6c e1 f6 fc |.........'..l...|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sda2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 28 03 00 |........?....(..|
00000020 00 00 00 00 80 00 80 00 ff ff df 21 00 00 00 00 |...........!....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 92 b6 2f 50 f3 2f 50 38 |........../P./P8|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sda4
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 90 6b 54 |........?.....kT|
00000020 00 00 00 00 80 00 80 00 ff cf e8 02 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 b7 68 00 0e 8d 00 0e d6 |.........h......|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sda5
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 10 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 80 2d 46 1a 00 00 00 00 |.........-F.....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 a5 bb 64 c4 e8 64 c4 26 |..........d..d.&|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 |t.............Er|
00000190 72 65 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 |reur lecture dis|
000001a0 71 75 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 61 62 |que...BOOTMGR ab|
000001b0 73 65 6e 74 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 |sent...BOOTMGR c|
000001c0 6f 6d 70 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b |ompress....Ctrl+|
000001d0 41 6c 74 2b 53 75 70 70 72 20 70 6f 75 72 20 72 |Alt+Suppr pour r|
000001e0 65 64 82 6d 61 72 72 65 72 0d 0a 00 6f 20 72 65 |ed.marrer...o re|
000001f0 73 74 61 72 74 0d 0a 00 8c a4 b5 c9 00 00 55 aa |start.........U.|
00000200
Partition 3 does not start on physical sector boundary.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 387M 12M 376M 3% /run
/dev/sda6 ext4 188G 49G 130G 28% /
tmpfs tmpfs 1.9G 316K 1.9G 1% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
cgmfs tmpfs 100K 0 100K 0% /run/cgmanager/fs
tmpfs tmpfs 387M 64K 387M 1% /run/user/1000
/dev/sda1 fuseblk 100M 31M 70M 31% /mnt/boot-sav/sda1
/dev/sda2 fuseblk 271G 79G 193G 29% /mnt/boot-sav/sda2
/dev/sda4 fuseblk 24G 23G 802M 97% /mnt/boot-sav/sda4
/dev/sda5 fuseblk 211G 19G 192G 10% /mnt/boot-sav/sda5
=================== fdisk -l:
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/sda: 698.7 GiB, 750156374016 bytes, 1465149168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x3882832c
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 206847 204800 100M 7 HPFS/NTFS/exFAT
/dev/sda2 206848 568535039 568328192 271G 7 HPFS/NTFS/exFAT
/dev/sda3 568537086 1416335359 847798274 404.3G f W95 Ext'd (LBA)
/dev/sda4 1416335360 1465147391 48812032 23.3G 27 Hidden NTFS WinRE
/dev/sda5 568537088 1009343881 440806794 210.2G 7 HPFS/NTFS/exFAT
/dev/sda6 1009344512 1408122879 398778368 190.2G 83 Linux
/dev/sda7 1408124928 1416335359 8210432 3.9G 82 Linux swap / Solaris
Partition table entries are not in disk order.
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to) and reinstall the grub2 of sda6 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot
=================== Final advice in case of suggested repair
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 16.04.1 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== User settings
The settings chosen by the user will not act on the boot.
paste.ubuntu.com ko (), using paste.debian
paste.debian.net ko (), using paste2Session installée non uefi. Un seul grub.
UUID corrects dans fstab.
Merci d'indiquer les services lancés au démarrage, et de donner
dmesgls -la .xsession*%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#6 Le 19/10/2016, à 18:02
- malbo
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
catsey a écrit :
Là je ne sais pas répondre. C’est un ordi que l'on m'a donné. Il était en dual boot win 7/ubuntu 14.04lts dont j'ai fait la mise à niveau.
Si on te l'a donné avec Ubuntu 14.04 LTS déjà installé, tu aurais dû faire une installation toute propre de Ubuntu au lieu de te trimbaler les casseroles d'un Ubuntu qui n'a pas été installé par toi. Je te recommande de sauvegarder tes données perso sur disque dur externe et de faire une installation toute neuve et toute propre de Ubuntu 16.04.1 64 bits. Quand ce sera fait, tu pourras réintégrer tes données dans l'installation toute neuve.
Dernière modification par malbo (Le 19/10/2016, à 18:04)
Hors ligne
#7 Le 19/10/2016, à 21:53
- catsey
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
Bonjour moko.
Voici mon dmesg (et il est long !) :
cat@cat-300E4A-300E5A-300E7A-3430EA-3530EA:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-43-generic (buildd@lgw01-22) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #63-Ubuntu SMP Wed Oct 12 13:48:03 UTC 2016 (Ubuntu 4.4.0-43.63-generic 4.4.21)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-43-generic root=UUID=8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aabeefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aabef000-0x00000000aaeeefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aaeef000-0x00000000aaf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000aaf9f000-0x00000000aaffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000aafff000-0x00000000aaffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ab000000-0x00000000af9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 300E4A/300E5A/300E7A/3430EA/3530EA/300E4A/300E5A/300E7A/3430EA/3530EA, BIOS 07QA 04/20/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x14fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0AC000000 mask FFC000000 uncachable
[ 0.000000] 5 base 0AB000000 mask FFF000000 uncachable
[ 0.000000] 6 base 100000000 mask FC0000000 write-back
[ 0.000000] 7 base 140000000 mask FE0000000 write-back
[ 0.000000] 8 base 150000000 mask FF0000000 uncachable
[ 0.000000] 9 base 14FE00000 mask FFFE00000 uncachable
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xab000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[ 0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[ 0.000000] BRK [0x02206000, 0x02206fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x337c4000-0x35bd9fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F00E0 000024 (v02 SECCSD)
[ 0.000000] ACPI: XSDT 0x00000000AAFFE120 000094 (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[ 0.000000] ACPI: FACP 0x00000000AAFF0000 0000F4 (v03 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: DSDT 0x00000000AAFF3000 007D37 (v02 SECCSD SNB-CPT 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS 0x00000000AAF3D000 000040
[ 0.000000] ACPI: FACS 0x00000000AAF3D000 000040
[ 0.000000] ACPI: SLIC 0x00000000AAFFD000 000176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[ 0.000000] ACPI: SSDT 0x00000000AAFFB000 001068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 0x00000000AAFF2000 0000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: HPET 0x00000000AAFEF000 000038 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: APIC 0x00000000AAFEE000 000098 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: MCFG 0x00000000AAFED000 00003C (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: SSDT 0x00000000AAFEC000 000780 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000AAFEB000 000996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x00000000AAFEA000 00003E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: UEFI 0x00000000AAFE9000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000AAFE8000 000DB1 (v01 SgRef SgTabl 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000AAFE7000 00072C (v01 NvORef NvOptTbl 00001000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x00000000AAFE6000 00021A (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x14fdf8000-0x14fdfcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000014fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000aabeefff]
[ 0.000000] node 0: [mem 0x00000000aafff000-0x00000000aaffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000014fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000014fdfffff]
[ 0.000000] On node 0 totalpages: 1026444
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 156 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10864 pages used for memmap
[ 0.000000] DMA32 zone: 695280 pages, LIFO batch:31
[ 0.000000] Normal zone: 5112 pages used for memmap
[ 0.000000] Normal zone: 327168 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xaba00000-0xaf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaabef000-0xaaeeefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaaeef000-0xaaf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaaf9f000-0xaaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xab000000-0xaf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[ 0.000000] e820: [mem 0xafa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88014fa00000 s98008 r8192 d28968 u262144
[ 0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1010248
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-43-generic root=UUID=8d1fbaad-e783-4cfd-b1b5-4eec6b9abab7 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3916796K/4105776K available (8409K kernel code, 1283K rwdata, 3944K rodata, 1480K init, 1292K bss, 188980K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16640 nr_irqs:488 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.728 MHz processor
[ 0.000035] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.45 BogoMIPS (lpj=9578912)
[ 0.000107] pid_max: default: 32768 minimum: 301
[ 0.000147] ACPI: Core revision 20150930
[ 0.007151] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.007240] Security Framework initialized
[ 0.007274] Yama: becoming mindful.
[ 0.007320] AppArmor: AppArmor initialized
[ 0.007627] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008625] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009101] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.009143] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.009403] Initializing cgroup subsys io
[ 0.009441] Initializing cgroup subsys memory
[ 0.009481] Initializing cgroup subsys devices
[ 0.009516] Initializing cgroup subsys freezer
[ 0.009551] Initializing cgroup subsys net_cls
[ 0.009586] Initializing cgroup subsys perf_event
[ 0.009622] Initializing cgroup subsys net_prio
[ 0.009659] Initializing cgroup subsys hugetlb
[ 0.009694] Initializing cgroup subsys pids
[ 0.009747] Disabled fast string operations
[ 0.009782] CPU: Physical Processor ID: 0
[ 0.009815] CPU: Processor Core ID: 0
[ 0.009852] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.009888] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.009928] mce: CPU supports 7 MCE banks
[ 0.009972] CPU0: Thermal monitoring enabled (TM1)
[ 0.010012] process: using mwait in idle threads
[ 0.010048] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.010085] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.010532] Freeing SMP alternatives memory: 32K (ffffffff820b4000 - ffffffff820bc000)
[ 0.013432] ftrace: allocating 32007 entries in 126 pages
[ 0.028601] smpboot: Max logical packages: 4
[ 0.028638] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.028750] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.029230] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068954] TSC deadline timer enabled
[ 0.068958] smpboot: CPU0: Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.069075] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.069223] core: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.069261] ... version: 3
[ 0.069294] ... bit width: 48
[ 0.070037] ... generic registers: 4
[ 0.070071] ... value mask: 0000ffffffffffff
[ 0.070106] ... max period: 0000ffffffffffff
[ 0.070141] ... fixed-purpose events: 3
[ 0.070174] ... event mask: 000000070000000f
[ 0.071027] x86: Booting SMP configuration:
[ 0.071062] .... node #0, CPUs: #1
[ 0.071384] Disabled fast string operations
[ 0.073612] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.073806] #2
[ 0.074091] Disabled fast string operations
[ 0.076239] #3
[ 0.076669] Disabled fast string operations
[ 0.078736] x86: Booted up 1 node, 4 CPUs
[ 0.078806] smpboot: Total of 4 processors activated (19157.82 BogoMIPS)
[ 0.082066] devtmpfs: initialized
[ 0.084414] evm: security.selinux
[ 0.084447] evm: security.SMACK64
[ 0.084479] evm: security.SMACK64EXEC
[ 0.084511] evm: security.SMACK64TRANSMUTE
[ 0.084544] evm: security.SMACK64MMAP
[ 0.084577] evm: security.ima
[ 0.084608] evm: security.capability
[ 0.084697] PM: Registering ACPI NVS region [mem 0xaaeef000-0xaaf9efff] (720896 bytes)
[ 0.084834] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.084974] pinctrl core: initialized pinctrl subsystem
[ 0.085121] RTC time: 14:39:42, date: 10/19/16
[ 0.085261] NET: Registered protocol family 16
[ 0.094741] cpuidle: using governor ladder
[ 0.106746] cpuidle: using governor menu
[ 0.106821] PCCT header not found.
[ 0.106941] ACPI: bus type PCI registered
[ 0.106975] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.107084] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.107139] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.107181] PCI: Using configuration type 1 for base access
[ 0.107245] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.119187] ACPI: Added _OSI(Module Device)
[ 0.119222] ACPI: Added _OSI(Processor Device)
[ 0.119257] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.119291] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.121654] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.123705] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.124576] ACPI: Dynamic OEM Table Load:
[ 0.124647] ACPI: SSDT 0xFFFF88014A742000 000670 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.125204] ACPI: Dynamic OEM Table Load:
[ 0.125272] ACPI: SSDT 0xFFFF88014A752800 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.125762] ACPI: Dynamic OEM Table Load:
[ 0.125829] ACPI: SSDT 0xFFFF88014A737800 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.126705] ACPI : EC: EC started
[ 0.128238] ACPI: Interpreter enabled
[ 0.128282] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.128376] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.128410] ACPI: Using IOAPIC for interrupt routing
[ 0.128468] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.134702] ACPI: Power Resource [FN00] (off)
[ 0.134828] ACPI: Power Resource [FN01] (off)
[ 0.134943] ACPI: Power Resource [FN02] (off)
[ 0.135057] ACPI: Power Resource [FN03] (off)
[ 0.135170] ACPI: Power Resource [FN04] (off)
[ 0.135753] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.135794] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.135997] \_SB_.PCI0:_OSC invalid UUID
[ 0.135998] _OSC request data:1 1f 0
[ 0.136001] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.136451] PCI host bridge to bus 0000:00
[ 0.136487] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.136526] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.136565] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.136616] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff window]
[ 0.136666] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.136717] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.136760] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.136847] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.136878] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.136914] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.136994] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.137006] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
[ 0.137012] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.137016] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.137133] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.137166] pci 0000:00:16.0: reg 0x10: [mem 0xe1605000-0xe160500f 64bit]
[ 0.137231] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.137314] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.137343] pci 0000:00:1a.0: reg 0x10: [mem 0xe160a000-0xe160a3ff]
[ 0.137417] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.137495] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.137524] pci 0000:00:1b.0: reg 0x10: [mem 0xe1600000-0xe1603fff 64bit]
[ 0.137587] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.137629] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.137705] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.137783] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.137824] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.137901] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.137977] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.138019] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.138099] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.138128] pci 0000:00:1d.0: reg 0x10: [mem 0xe1609000-0xe16093ff]
[ 0.138202] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.138279] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.138448] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.138473] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.138481] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.138489] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.138497] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.138505] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.138514] pci 0000:00:1f.2: reg 0x24: [mem 0xe1608000-0xe16087ff]
[ 0.138546] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.138620] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.138638] pci 0000:00:1f.3: reg 0x10: [mem 0xe1604000-0xe16040ff 64bit]
[ 0.138659] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.138785] pci 0000:01:00.0: [10de:1051] type 00 class 0x030200
[ 0.138805] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xe0ffffff]
[ 0.138815] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.138824] pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
[ 0.138831] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.138838] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.138926] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.146805] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.146880] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.146886] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe0ffffff]
[ 0.146895] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 0.147116] pci 0000:02:00.0: [8086:0896] type 00 class 0x028000
[ 0.147396] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe1501fff 64bit]
[ 0.148008] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.148146] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.154937] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.154977] pci 0000:00:1c.0: bridge window [mem 0xe1500000-0xe15fffff]
[ 0.155107] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.155279] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.155395] pci 0000:03:00.0: reg 0x18: [mem 0xe1404000-0xe1404fff 64bit pref]
[ 0.155468] pci 0000:03:00.0: reg 0x20: [mem 0xe1400000-0xe1403fff 64bit pref]
[ 0.155769] pci 0000:03:00.0: supports D1 D2
[ 0.155770] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.155882] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.162866] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.162940] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.162949] pci 0000:00:1c.3: bridge window [mem 0xe1400000-0xe14fffff 64bit pref]
[ 0.163674] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.163944] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.164253] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.164519] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.164784] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[ 0.165049] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.165358] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.165625] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[ 0.166503] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.166621] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.166803] ACPI : EC: 0 stale EC events cleared
[ 0.166984] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.167021] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.167073] vgaarb: loaded
[ 0.167105] vgaarb: bridge control possible 0000:00:02.0
[ 0.167356] SCSI subsystem initialized
[ 0.167433] libata version 3.00 loaded.
[ 0.167455] ACPI: bus type USB registered
[ 0.167506] usbcore: registered new interface driver usbfs
[ 0.167549] usbcore: registered new interface driver hub
[ 0.167602] usbcore: registered new device driver usb
[ 0.167782] PCI: Using ACPI for IRQ routing
[ 0.169326] PCI: pci_cache_line_size set to 64 bytes
[ 0.169417] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.169418] e820: reserve RAM buffer [mem 0xaabef000-0xabffffff]
[ 0.169420] e820: reserve RAM buffer [mem 0xab000000-0xabffffff]
[ 0.169421] e820: reserve RAM buffer [mem 0x14fe00000-0x14fffffff]
[ 0.169540] NetLabel: Initializing
[ 0.169573] NetLabel: domain hash size = 128
[ 0.169607] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.169651] NetLabel: unlabeled traffic allowed by default
[ 0.169753] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.169928] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.171978] amd_nb: Cannot enumerate AMD northbridges
[ 0.172028] clocksource: Switched to clocksource hpet
[ 0.177936] AppArmor: AppArmor Filesystem Enabled
[ 0.178045] pnp: PnP ACPI init
[ 0.178486] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.178524] system 00:00: [io 0x1000-0x100f] has been reserved
[ 0.178561] system 00:00: [io 0x5000-0x5003] has been reserved
[ 0.178600] system 00:00: [io 0xffff] has been reserved
[ 0.178636] system 00:00: [io 0x0400-0x0453] could not be reserved
[ 0.178674] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.178711] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.178748] system 00:00: [io 0x0a00-0x0a0f] has been reserved
[ 0.178785] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.178821] system 00:00: [io 0x5000-0x500f] could not be reserved
[ 0.178862] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.178889] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.178940] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.178978] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.179010] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.179063] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.179200] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.179239] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.179277] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.179315] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.179353] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.179392] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.179429] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.179467] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.179506] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.179544] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.179583] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.180020] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.180052] pnp: PnP ACPI: found 7 devices
[ 0.186635] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.186696] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.186777] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[ 0.186816] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[ 0.186867] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.186903] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.186941] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe0ffffff]
[ 0.186980] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 0.187032] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.187071] pci 0000:00:1c.0: bridge window [mem 0xe1500000-0xe15fffff]
[ 0.187115] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.187151] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.187193] pci 0000:00:1c.3: bridge window [mem 0xe1400000-0xe14fffff 64bit pref]
[ 0.187250] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.187251] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.187253] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.187254] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff window]
[ 0.187256] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.187257] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.187259] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe0ffffff]
[ 0.187260] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 0.187262] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff]
[ 0.187263] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.187265] pci_bus 0000:03: resource 2 [mem 0xe1400000-0xe14fffff 64bit pref]
[ 0.187297] NET: Registered protocol family 2
[ 0.187496] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.187620] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.187753] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.187823] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.187876] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.187963] NET: Registered protocol family 1
[ 0.188013] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.188358] PCI: CLS 64 bytes, default 64
[ 0.188408] Trying to unpack rootfs image as initramfs...
[ 0.785270] Freeing initrd memory: 36952K (ffff8800337c4000 - ffff880035bda000)
[ 0.785363] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.785402] software IO TLB [mem 0xa6bef000-0xaabef000] (64MB) mapped at [ffff8800a6bef000-ffff8800aabeefff]
[ 0.786235] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.786287] hw unit of domain pp0-core 2^-16 Joules
[ 0.786322] hw unit of domain package 2^-16 Joules
[ 0.786356] hw unit of domain pp1-gpu 2^-16 Joules
[ 0.786486] Scanning for low memory corruption every 60 seconds
[ 0.786937] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.787024] audit: initializing netlink subsys (disabled)
[ 0.787075] audit: type=2000 audit(1476887982.784:1): initialized
[ 0.787508] Initialise system trusted keyring
[ 0.787646] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.789280] zbud: loaded
[ 0.789512] VFS: Disk quotas dquot_6.6.0
[ 0.789579] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.789888] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.790173] fuse init (API version 7.23)
[ 0.790357] Key type big_key registered
[ 0.790418] Allocating IMA MOK and blacklist keyrings.
[ 0.790842] Key type asymmetric registered
[ 0.790877] Asymmetric key parser 'x509' registered
[ 0.790947] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.791028] io scheduler noop registered
[ 0.791064] io scheduler deadline registered (default)
[ 0.791129] io scheduler cfq registered
[ 0.791605] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.791648] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.791721] intel_idle: MWAIT substates: 0x21120
[ 0.791722] intel_idle: v0.4.1 model 0x2A
[ 0.791723] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.792116] ACPI: AC Adapter [ADP1] (on-line)
[ 0.792211] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.792277] ACPI: Lid Switch [LID0]
[ 0.792345] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.792398] ACPI: Power Button [PWRB]
[ 0.792465] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.792516] ACPI: Power Button [PWRF]
[ 0.793861] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.793901] ACPI: Thermal Zone [TZ00] (55 C)
[ 0.794126] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.794164] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.794230] GHES: HEST is not enabled!
[ 0.794378] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.797297] Linux agpgart interface v0.103
[ 0.799046] ACPI: Battery Slot [BAT1] (battery present)
[ 0.800716] brd: module loaded
[ 0.801980] loop: module loaded
[ 0.802221] libphy: Fixed MDIO Bus: probed
[ 0.802257] tun: Universal TUN/TAP device driver, 1.6
[ 0.802292] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.802373] PPP generic driver version 2.4.2
[ 0.802466] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.802507] ehci-pci: EHCI PCI platform driver
[ 0.802657] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.802698] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.802761] ehci-pci 0000:00:1a.0: debug port 2
[ 0.806704] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.806716] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe160a000
[ 0.815994] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.816075] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.816114] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.816164] usb usb1: Product: EHCI Host Controller
[ 0.816199] usb usb1: Manufacturer: Linux 4.4.0-43-generic ehci_hcd
[ 0.816236] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.816391] hub 1-0:1.0: USB hub found
[ 0.816430] hub 1-0:1.0: 2 ports detected
[ 0.816637] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.816676] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.816736] ehci-pci 0000:00:1d.0: debug port 2
[ 0.820679] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.820688] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe1609000
[ 0.832096] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.832235] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.832274] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.832325] usb usb2: Product: EHCI Host Controller
[ 0.832360] usb usb2: Manufacturer: Linux 4.4.0-43-generic ehci_hcd
[ 0.832397] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.832583] hub 2-0:1.0: USB hub found
[ 0.832622] hub 2-0:1.0: 2 ports detected
[ 0.832767] ehci-platform: EHCI generic platform driver
[ 0.832820] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.832861] ohci-pci: OHCI PCI platform driver
[ 0.832906] ohci-platform: OHCI generic platform driver
[ 0.832949] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.833049] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SPAD] at 0x60,0x64 irq 1,12
[ 0.836120] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.836158] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.836335] mousedev: PS/2 mouse device common for all mice
[ 0.836690] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.836752] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.836810] i2c /dev entries driver
[ 0.836898] device-mapper: uevent: version 1.0.3
[ 0.837002] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.837073] Intel P-state driver initializing.
[ 0.837446] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.838669] NET: Registered protocol family 10
[ 0.839384] NET: Registered protocol family 17
[ 0.839495] Key type dns_resolver registered
[ 0.840138] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x23
[ 0.840231] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x23
[ 0.840366] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x23
[ 0.840463] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x23
[ 0.840660] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.841222] registered taskstats version 1
[ 0.841330] Loading compiled-in X.509 certificates
[ 0.844192] Loaded X.509 cert 'Build time autogenerated kernel key: d76179dc6bbadd817ec29258d181eadabda602cb'
[ 0.844269] zswap: loaded using pool lzo/zbud
[ 0.846235] Key type trusted registered
[ 0.849535] Key type encrypted registered
[ 0.849577] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.849615] ima: No TPM chip found, activating TPM-bypass!
[ 0.849672] evm: HMAC attrs: 0x1
[ 0.850073] Magic number: 4:71:688
[ 0.850209] rtc_cmos 00:01: setting system clock to 2016-10-19 14:39:43 UTC (1476887983)
[ 0.850326] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.850364] EDD information not available.
[ 0.850468] PM: Hibernation image not present or could not be loaded.
[ 0.851892] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[ 0.851944] Write protecting the kernel read-only data: 14336k
[ 0.852644] Freeing unused kernel memory: 1820K (ffff880001839000 - ffff880001a00000)
[ 0.853109] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
[ 0.863084] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.863214] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.863282] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.863355] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.863712] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.863814] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.864152] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.864262] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.864370] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.864475] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 0.874960] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.890971] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.909610] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.909662] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.910354] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000064e000, e8:03:9a:bd:a0:5e, XID 0c900800 IRQ 25
[ 0.910415] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.912020] ahci 0000:00:1f.2: version 3.0
[ 0.912203] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.914539] [drm] Initialized drm 1.1.0 20060810
[ 0.928541] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1d impl SATA mode
[ 0.928608] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 0.936238] wmi: Mapper loaded
[ 0.956951] scsi host0: ahci
[ 0.958793] scsi host1: ahci
[ 0.965293] scsi host2: ahci
[ 0.968043] scsi host3: ahci
[ 0.971446] scsi host4: ahci
[ 0.972790] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 0.972899] ACPI: \_SB_.PCI0.GFX0: failed to evaluate _DSM
[ 0.972987] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 0.974096] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 0.974439] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 0.974500] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 0.974703] nouveau 0000:01:00.0: NVIDIA GF119 (0d9110a1)
[ 0.976028] scsi host5: ahci
[ 0.976440] ata1: SATA max UDMA/133 abar m2048@0xe1608000 port 0xe1608100 irq 26
[ 0.976771] ata2: DUMMY
[ 0.976995] ata3: SATA max UDMA/133 abar m2048@0xe1608000 port 0xe1608200 irq 26
[ 0.977395] ata4: SATA max UDMA/133 abar m2048@0xe1608000 port 0xe1608280 irq 26
[ 0.977755] ata5: SATA max UDMA/133 abar m2048@0xe1608000 port 0xe1608300 irq 26
[ 0.978104] ata6: DUMMY
[ 0.979520] [drm] Memory usable by graphics device = 2048M
[ 0.979560] [drm] Replacing VGA console driver
[ 0.980240] Console: switching to colour dummy device 80x25
[ 0.990098] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.990105] [drm] Driver supports precise vblank timestamp query.
[ 0.992313] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.021153] nouveau 0000:01:00.0: bios: version 75.19.4f.00.1d
[ 1.127987] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.167985] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.260292] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.260298] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.260563] hub 1-1:1.0: USB hub found
[ 1.260637] hub 1-1:1.0: 6 ports detected
[ 1.276929] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 1.277490] fbcon: inteldrmfb (fb0) is primary device
[ 1.278177] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 1.296069] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.300788] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.300790] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.301217] hub 2-1:1.0: USB hub found
[ 1.301265] hub 2-1:1.0: 6 ports detected
[ 1.302381] ata1.00: ATA-8: ST750LM022 HN-M750MBB, 2AR10002, max UDMA/133
[ 1.302383] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.308700] ata1.00: configured for UDMA/133
[ 1.309030] scsi 0:0:0:0: Direct-Access ATA ST750LM022 HN-M7 0002 PQ: 0 ANSI: 5
[ 1.309300] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[ 1.309301] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.309344] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.309373] sd 0:0:0:0: [sda] Write Protect is off
[ 1.309376] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.309411] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.396482] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
[ 1.397322] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.532026] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[ 1.571954] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[ 1.627791] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1020
[ 1.627796] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.627799] usb 1-1.4: Product: WebCam SC-0311139N
[ 1.627802] usb 1-1.4: Manufacturer: Image Processor
[ 1.627804] usb 1-1.4: SerialNumber: SM3711
[ 1.627952] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.630029] ata3.00: ATAPI: TSSTcorp CDDVDW SN-208BB, SC00, max UDMA/100
[ 1.632709] ata3.00: configured for UDMA/100
[ 1.635585] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208BB SC00 PQ: 0 ANSI: 5
[ 1.655538] sr 2:0:0:0: [sr0] scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.655542] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.655743] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.655811] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.668581] usb 2-1.3: New USB device found, idVendor=8086, idProduct=0189
[ 1.668586] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.739955] usb 2-1.5: new low-speed USB device number 4 using ehci-pci
[ 1.783950] tsc: Refined TSC clocksource calibration: 2394.560 MHz
[ 1.783953] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2284248580e, max_idle_ns: 440795288736 ns
[ 1.806106] psmouse serio1: synaptics: queried max coordinates: x [..5738], y [..4886]
[ 1.836670] usb 2-1.5: New USB device found, idVendor=093a, idProduct=2510
[ 1.836674] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.836678] usb 2-1.5: Product: USB Optical Mouse
[ 1.836681] usb 2-1.5: Manufacturer: PixArt
[ 1.840851] psmouse serio1: synaptics: queried min coordinates: x [1210..], y [986..]
[ 1.841255] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.845068] usbcore: registered new interface driver usbhid
[ 1.845068] usbhid: USB HID core driver
[ 1.846616] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:093A:2510.0001/input/input6
[ 1.846740] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
[ 1.906519] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00133/0x240000/0xa2400/0x0, board id: 1874, fw id: 1066450
[ 1.948741] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 1.976020] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.295996] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.568601] Console: switching to colour frame buffer device 200x56
[ 2.571940] acpi device:2d: registered as cooling_device9
[ 2.571999] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input7
[ 2.572712] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.572964] acpi device:39: registered as cooling_device10
[ 2.573081] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[ 2.573603] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 2.605780] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.656364] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
[ 2.715524] vga_switcheroo: enabled
[ 2.716947] [TTM] Zone kernel: Available graphics memory: 1978616 kiB
[ 2.718242] [TTM] Initializing pool allocator
[ 2.719520] [TTM] Initializing DMA pool allocator
[ 2.720804] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[ 2.722056] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 2.723281] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 2.724510] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 2.791269] clocksource: Switched to clocksource tsc
[ 2.791712] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[ 2.791720] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[ 4.176915] random: nonblocking pool is initialized
[ 4.208287] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 5.270873] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[ 5.748809] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 5.751539] systemd[1]: Detected architecture x86-64.
[ 5.803993] systemd[1]: Set hostname to <cat-300E4A-300E5A-300E7A-3430EA-3530EA>.
[ 7.819525] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 7.821123] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 7.822429] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 7.824061] nouveau 0000:01:00.0: DRM: evicting buffers...
[ 7.825427] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[ 7.826863] nouveau 0000:01:00.0: DRM: suspending client object trees...
[ 7.828425] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[ 8.678908] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 8.681829] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.684625] systemd[1]: Created slice System Slice.
[ 8.687355] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.690074] systemd[1]: Reached target Remote File Systems (Pre).
[ 8.692771] systemd[1]: Reached target Remote File Systems.
[ 8.695449] systemd[1]: Listening on udev Kernel Socket.
[ 8.698087] systemd[1]: Listening on Syslog Socket.
[ 8.700708] systemd[1]: Listening on udev Control Socket.
[ 8.703326] systemd[1]: Listening on Journal Socket.
[ 8.715757] systemd[1]: Started Read required files in advance.
[ 8.931736] systemd[1]: Starting Set console keymap...
[ 8.934920] systemd[1]: Mounting Huge Pages File System...
[ 8.938472] systemd[1]: Starting Uncomplicated firewall...
[ 8.941659] systemd[1]: Listening on Journal Audit Socket.
[ 8.944389] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.947543] systemd[1]: Starting Journal Service...
[ 8.950300] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.953494] systemd[1]: Mounting Debug File System...
[ 8.956726] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 8.959881] systemd[1]: Reached target Encrypted Volumes.
[ 9.359607] systemd[1]: Starting Load Kernel Modules...
[ 9.363031] systemd[1]: Mounting POSIX Message Queue File System...
[ 9.365693] systemd[1]: Reached target User and Group Name Lookups.
[ 9.368461] systemd[1]: Created slice User and Session Slice.
[ 9.371186] systemd[1]: Reached target Slices.
[ 9.392173] systemd[1]: Mounted Huge Pages File System.
[ 9.394658] systemd[1]: Mounted Debug File System.
[ 9.397531] systemd[1]: Mounted POSIX Message Queue File System.
[ 9.404145] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 9.423812] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 9.511052] systemd[1]: Started Uncomplicated firewall.
[ 10.271001] systemd[1]: Started Journal Service.
[ 10.484807] lp: driver loaded but no devices found
[ 15.515143] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 16.255358] systemd-journald[240]: Received request to flush runtime journal from PID 1
[ 16.433071] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[ 16.433078] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.433082] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 16.433086] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[ 16.433089] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.433090] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 16.433093] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[ 16.433096] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.433097] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 16.433100] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[ 16.433102] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.433103] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 16.873475] samsung_laptop: detected SABI interface: SwSmi@
[ 16.920371] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.455460] Intel(R) Wireless WiFi driver for Linux
[ 18.455463] Copyright(c) 2003- 2015 Intel Corporation
[ 18.455659] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 19.024597] media: Linux media interface: v0.10
[ 19.374324] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 19.438271] Linux video capture interface: v2.00
[ 19.452961] Bluetooth: Core ver 2.21
[ 19.452979] NET: Registered protocol family 31
[ 19.452980] Bluetooth: HCI device and connection manager initialized
[ 19.452985] Bluetooth: HCI socket layer initialized
[ 19.452988] Bluetooth: L2CAP socket layer initialized
[ 19.453001] Bluetooth: SCO socket layer initialized
[ 20.355358] usbcore: registered new interface driver btusb
[ 20.399995] uvcvideo: Found UVC 1.00 device WebCam SC-0311139N (2232:1020)
[ 20.400993] input: WebCam SC-0311139N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input9
[ 20.401057] usbcore: registered new interface driver uvcvideo
[ 20.401058] USB Video Class driver (1.1.1)
[ 20.483460] cfg80211: World regulatory domain updated:
[ 20.483463] cfg80211: DFS Master region: unset
[ 20.483465] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 20.483467] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 20.483469] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 20.483470] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 20.483472] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 20.483474] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 20.483475] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 20.483476] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 20.483478] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 20.956288] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 20.956291] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 20.956292] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 20.956294] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 130 BGN, REV=0xB0
[ 20.956392] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 21.203056] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 21.256285] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 21.256291] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 21.256294] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 21.256296] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 21.256297] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 21.256299] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 21.256301] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 21.688458] intel_rapl: Found RAPL domain package
[ 21.688461] intel_rapl: Found RAPL domain core
[ 21.688462] intel_rapl: Found RAPL domain uncore
[ 21.688467] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 22.068484] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 22.068590] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 22.068692] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 23.036381] Adding 4105212k swap on /dev/sda7. Priority:-1 extents:1 across:4105212k FS
[ 25.984820] audit: type=1400 audit(1476880808.632:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=630 comm="apparmor_parser"
[ 25.984828] audit: type=1400 audit(1476880808.632:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=630 comm="apparmor_parser"
[ 25.984832] audit: type=1400 audit(1476880808.632:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=630 comm="apparmor_parser"
[ 25.984836] audit: type=1400 audit(1476880808.632:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=630 comm="apparmor_parser"
[ 26.163359] audit: type=1400 audit(1476880808.812:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=634 comm="apparmor_parser"
[ 26.163368] audit: type=1400 audit(1476880808.812:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=634 comm="apparmor_parser"
[ 26.222675] audit: type=1400 audit(1476880808.872:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=633 comm="apparmor_parser"
[ 26.222685] audit: type=1400 audit(1476880808.872:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=633 comm="apparmor_parser"
[ 26.317665] audit: type=1400 audit(1476880808.964:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=629 comm="apparmor_parser"
[ 26.317675] audit: type=1400 audit(1476880808.964:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=629 comm="apparmor_parser"
[ 32.167689] cgroup: new mount options do not match the existing superblock, will be ignored
[ 32.467238] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[ 32.588604] nouveau 0000:01:00.0: DRM: resuming client object trees...
[ 36.464551] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 36.464554] Bluetooth: BNEP filters: protocol multicast
[ 36.464559] Bluetooth: BNEP socket layer initialized
[ 37.785535] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 37.785842] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 37.785848] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 37.786098] nouveau 0000:01:00.0: DRM: evicting buffers...
[ 37.786101] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[ 37.786131] nouveau 0000:01:00.0: DRM: suspending client object trees...
[ 37.786338] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[ 40.521784] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 40.521921] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 40.528599] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 40.528685] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[ 40.597495] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 40.604172] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 40.604260] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[ 40.662817] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 40.667337] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 40.871433] r8169 0000:03:00.0 eth0: link down
[ 40.871452] r8169 0000:03:00.0 eth0: link down
[ 40.871504] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 41.538470] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[ 41.659774] nouveau 0000:01:00.0: DRM: resuming client object trees...
[ 43.440733] r8169 0000:03:00.0 eth0: link up
[ 43.440745] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 46.776899] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 46.777228] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 46.777235] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 46.777494] nouveau 0000:01:00.0: DRM: evicting buffers...
[ 46.777496] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[ 46.777536] nouveau 0000:01:00.0: DRM: suspending client object trees...
[ 46.777742] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[ 48.150677] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 48.254405] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[ 48.375805] nouveau 0000:01:00.0: DRM: resuming client object trees...
[ 48.617946] wlan0: authenticate with 68:a3:78:d0:36:bc
[ 48.623490] wlan0: send auth to 68:a3:78:d0:36:bc (try 1/3)
[ 48.626284] wlan0: authenticated
[ 48.628779] wlan0: associate with 68:a3:78:d0:36:bc (try 1/3)
[ 48.632206] wlan0: RX AssocResp from 68:a3:78:d0:36:bc (capab=0x411 status=0 aid=2)
[ 48.640104] wlan0: associated
[ 48.640142] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 53.904293] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 53.904573] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 53.904577] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 53.904828] nouveau 0000:01:00.0: DRM: evicting buffers...
[ 53.916407] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[ 53.916438] nouveau 0000:01:00.0: DRM: suspending client object trees...
[ 53.916742] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[ 55.295096] Bluetooth: RFCOMM TTY layer initialized
[ 55.295104] Bluetooth: RFCOMM socket layer initialized
[ 55.295111] Bluetooth: RFCOMM ver 1.11
[ 7204.738098] perf interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[24432.925560] r8169 0000:03:00.0 eth0: link down
cat@cat-300E4A-300E5A-300E7A-3430EA-3530EA:~$ Là, ça ressemble à l'écran qui défile au démarrage, non ?
Et pour "ls -la .xsession*" :
cat@cat-300E4A-300E5A-300E7A-3430EA-3530EA:~$ ls -la .xsession*
-rw------- 1 cat cat 0 oct. 19 14:40 .xsession-errors
-rw------- 1 cat cat 1108 oct. 19 14:39 .xsession-errors.old
cat@cat-300E4A-300E5A-300E7A-3430EA-3530EA:~$ Oups ! Problème ? (Je ne sais pas à quoi correspond cette commande).
malbo, je ne connaissais rien à rien à ubuntu avant d'installer la 16.04 lts sur le nouvel ordi de ma femme, qui m'a donc donné celui-ci... J'ai pensé (bêtement) qu'il suffisait alors d'accepter la maj automatiquement proposée. Tu as raison, je pourrais réinstaller correctement une 16.04 toute neuve (en cherchant un peu comment faire, surtout au niveau des partitions), de toutes façons, je n'ai pas beaucoup de données à sauvegarder. A voir, selon les réponses de moko...
Au moins, pour l'utilisation que je fais (bureautique, internet et retouches photos), je dirais que je suis content de ma migration. Il me semblait simplement un peu lent : maintenant, c'est confirmé.
Merci à vous.
Cordialement.
Lenovo ideapad 500-15lsk, Ubuntu 16.04 LTS en dual boot Win 10
Samsung NP300E7A, Debian 9.4, Cinnamon 3.2.7 en monoboot
Hors ligne
#8 Le 19/10/2016, à 22:00
- tarkan99
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
Si tu penses à réinstaller à neuf, pourquoi ne pas tester une variante, comme xubuntu 16.04 ?
tu pourrais voir un mieux au niveau réactivité.
xubuntu 22.04.1 sur machine assemblée base de Core i5 9400
Hors ligne
#9 Le 19/10/2016, à 23:08
- catsey
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
Salut tarkan,
Je suis très nouveau sur linux (j'ai commencé en dos 5, j'ai utilisé d'autres os depuis...) et je suis sur ubuntu parce que c'était déjà installé.
Alors oui, ça pourrait bien être tentant de découvrir d'autres environnements, mais je vais devoir regarder les grosses différences. (compatibilité avec mes imprimantes pour lesquelles (enfin 1) j'ai ramé...). Mais pas de retour à windows envisagé, pourquoi pas xubuntu ?
Merci pour l'idée !
Dernière modification par catsey (Le 20/10/2016, à 11:03)
Cordialement.
Lenovo ideapad 500-15lsk, Ubuntu 16.04 LTS en dual boot Win 10
Samsung NP300E7A, Debian 9.4, Cinnamon 3.2.7 en monoboot
Hors ligne
#10 Le 20/10/2016, à 11:31
- catsey
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
Bonjour moko,
La liste des processus en cours (je n'ai pas trouvé la commande pour visualiser ceux lancés au démarrage :
cat@cat-300E4A-300E5A-300E7A-3430EA-3530EA:~$ service --status-all
[ + ] acpid
[ - ] alsa-utils
[ - ] anacron
[ + ] apparmor
[ + ] apport
[ + ] avahi-daemon
[ + ] bluetooth
[ - ] bluetooth~
[ - ] bootmisc.sh
[ + ] cgmanager
[ - ] cgproxy
[ - ] checkfs.sh
[ - ] checkroot-bootclean.sh
[ - ] checkroot.sh
[ + ] console-setup
[ + ] cron
[ + ] cups
[ + ] cups-browsed
[ + ] dbus
[ - ] dns-clean
[ + ] grub-common
[ - ] hostname.sh
[ - ] hwclock.sh
[ + ] irqbalance
[ - ] kerneloops
[ + ] keyboard-setup
[ - ] killprocs
[ + ] kmod
[ + ] lightdm
[ - ] mountall-bootclean.sh
[ - ] mountall.sh
[ - ] mountdevsubfs.sh
[ - ] mountkernfs.sh
[ - ] mountnfs-bootclean.sh
[ - ] mountnfs.sh
[ + ] network-manager
[ + ] networking
[ + ] ondemand
[ + ] osspd
[ - ] plymouth
[ - ] plymouth-log
[ - ] pppd-dns
[ + ] procps
[ - ] pulseaudio
[ + ] rc.local
[ + ] resolvconf
[ - ] rsync
[ + ] rsyslog
[ - ] saned
[ - ] sendsigs
[ - ] speech-dispatcher
[ + ] thermald
[ + ] udev
[ + ] ufw
[ - ] umountfs
[ - ] umountnfs.sh
[ - ] umountroot
[ - ] unattended-upgrades
[ + ] urandom
[ - ] uuidd
[ + ] whoopsie
[ - ] x11-common
cat@cat-300E4A-300E5A-300E7A-3430EA-3530EA:~$ Sachant que j'ai seulement firefox, le pense-bête stickynotes et la console qui tournent actuellement...
Après, si je lance l'indicateur des applications au démarrage, je vois :
puis :
après avoir saisi :
sudo sed -i 's/NoDisplay=true/NoDisplay=false/g' /etc/xdg/autostart/*.desktopJe galère pour envoyer des images... Pourvu que ça marche !
Cordialement.
Lenovo ideapad 500-15lsk, Ubuntu 16.04 LTS en dual boot Win 10
Samsung NP300E7A, Debian 9.4, Cinnamon 3.2.7 en monoboot
Hors ligne
#11 Le 20/10/2016, à 11:35
- catsey
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
bon, je suis nul, je te donne les url :
Pour la première image
et
pour la deuxième...
après avoir saisi :
sudo sed -i 's/NoDisplay=true/NoDisplay=false/g' /etc/xdg/autostart/*.desktoppfffffff.
Cordialement.
Lenovo ideapad 500-15lsk, Ubuntu 16.04 LTS en dual boot Win 10
Samsung NP300E7A, Debian 9.4, Cinnamon 3.2.7 en monoboot
Hors ligne
#12 Le 20/10/2016, à 11:37
- catsey
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
bon, ben ça a marché, c'est laborieux, mais on y arrive...:/
Cordialement.
Lenovo ideapad 500-15lsk, Ubuntu 16.04 LTS en dual boot Win 10
Samsung NP300E7A, Debian 9.4, Cinnamon 3.2.7 en monoboot
Hors ligne
#13 Le 20/10/2016, à 11:51
- catsey
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
Encore une question bête :
Pourquoi est-i préférable de désactiver la liste complète des applications au démarrage ?
sudo sed -i 's/NoDisplay=false/NoDisplay=true/g' /etc/xdg/autostart/*.desktopC'est dangereux de le laisser activé ?
Cordialement.
Lenovo ideapad 500-15lsk, Ubuntu 16.04 LTS en dual boot Win 10
Samsung NP300E7A, Debian 9.4, Cinnamon 3.2.7 en monoboot
Hors ligne
#14 Le 20/10/2016, à 15:03
- moko138
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
Je découvre seulement tes messages depuis le #7.
Avant que je ne les épluche, personne ne t'a dit de "désactiver la liste complète des applications au démarrage" !
Simplement, si tu n'utilises pas ou peu certaines (le serveur d'impression, le bluetooth etc.), à quoi bon intégrer leur lancement au démarrage ?
Bénéfice : nul ; perte de temps : dizaines de secondes.
J'ignore à quoi sert la commande
sudo sed -i 's/NoDisplay=false/NoDisplay=true/g' /etc/xdg/autostart/*.desktopmais si elle t'a fait passer de la première à la 2ème capture (ne les aurais-tu pas inversées ?), ce n'est pas une réussite.
J'ignore à quoi sert umf.
zeitgeist est controversé ; je m'en passe avec bonheur.
J'ignore à quoi sert onboard.
Ta capture de 11h21 est incomplète : elle commence à la lettre I...
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#15 Le 20/10/2016, à 16:14
- catsey
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
Bonjour moko,
La première image correspond à la liste des applications au démarrage. En fait il n'y en a que très peu.
Or, j'ai trouvé quelque part sur le forum cette commande
sudo sed -i 's/NoDisplay=true/NoDisplay=false/g' /etc/xdg/autostart/*.desktopqui fait apparaitre semble-t-il toutes les applications au démarrage, ce qui donne la seconde image.
Mais il était également dit qu'il valait mieux revenir à l'état initial, c'est à dire désactiver l'affichage complet en entrant la commande (c'est du moins ce que j'ai compris...)
sudo sed -i 's/NoDisplay=false/NoDisplay=true/g' /etc/xdg/autostart/*.desktopVoici l'url du début de la liste, je ne peux capturer la totalité :
http://www.casimages.com/img.php?i=16102004102722041814569184.pngSi j'ai bien compris, je décoche simplement les programmes dont je n'ai pas besoin au démarrage.
Pour le bluetooth, je m'en sers, mais aucune utilité au démarrage. Mon pc n'est pas un serveur d'impression, nous imprimons tous en wifi directement sur l'imprimante, zeitgeist, j'ignore ce que c'est... umf c'est les pilotes d'une seconde imprimante (lexmark), je peux donc l'arrêter pour voir, onboard, je vais chercher, mais c'est peut-être parce que j'ai installé unity tweak tool qui ne me sert à rien... Je n'avais désactivé qu'une option (messagerie instantanée, je crois), je n'ai pas osé aller plus loin...
Merci pour ton aide précieuse.
Cordialement.
Lenovo ideapad 500-15lsk, Ubuntu 16.04 LTS en dual boot Win 10
Samsung NP300E7A, Debian 9.4, Cinnamon 3.2.7 en monoboot
Hors ligne
#16 Le 20/10/2016, à 18:34
- catsey
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
Pour info, Onboard est le clavier virtuel d'ubuntu. Je vais soit le désinstaller, soit supprimer son lancement auto...
Cordialement.
Lenovo ideapad 500-15lsk, Ubuntu 16.04 LTS en dual boot Win 10
Samsung NP300E7A, Debian 9.4, Cinnamon 3.2.7 en monoboot
Hors ligne
#17 Le 20/10/2016, à 19:45
- moko138
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
catsey a écrit :
La première image correspond à la liste des applications au démarrage. En fait il n'y en a que très peu.
Or, j'ai trouvé quelque part sur le forum cette commandesudo sed -i 's/NoDisplay=true/NoDisplay=false/g' /etc/xdg/autostart/*.desktopqui fait apparaitre semble-t-il toutes les applications au démarrage,
1) Je n'ai pas compris.
2) Attention à
trouvé quelque part sur le forum (...) semble-t-il
Tu peux appliquer une commande de la Doc si tu l'as comprise et qu'elle est adaptée à ta situation.
Mais là tu joues à l'apprenti sorcier.
- -
Merci pour l'explication de "onboard". 
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#18 Le 20/10/2016, à 19:49
- moko138
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
Le retour de
ls -la .xsession*est bon : le poids des fichiers (qui est exprimé en octets) est tout petit, donc pas de problème de session X, c'est-à-dire graphique.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#19 Le 21/10/2016, à 11:02
- catsey
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
Bonjour moko,
Quand j'écrivais
trouvé quelque part sur le forum (...) semble-t-il, je voulais dire que de mémoire, la fonction est...
Mais ta remarque très pertinente m'a incité à rechercher cette info, et j'ai trouvé la réponse à ma question bête du #13 !
Voici le lien, si cela peut t'être utile : Utilisation avancée du gestionnaire de démarrage.
Tu n'as rien relevé d'anormal, je suppose donc que des applications inutiles se lancent au démarrage.
Si tu me donnes ton feu vert, j'ai envie de décocher umf, zeitgeist, bluetooth, onboard et le serveur d'impression. Sans les supprimer de la liste, je garde la possibilité de les réactiver si besoin. Je prendrai alors un nouveau chrono pour te tenir informé.
Qu'en penses-tu ?
Je rappelle qu'il n'y a absolument aucune urgence, tout fonctionne à merveille, je suis juste en apprentissage !
Dernière modification par catsey (Le 21/10/2016, à 11:03)
Cordialement.
Lenovo ideapad 500-15lsk, Ubuntu 16.04 LTS en dual boot Win 10
Samsung NP300E7A, Debian 9.4, Cinnamon 3.2.7 en monoboot
Hors ligne
#20 Le 03/11/2016, à 10:09
- catsey
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
Bonjour moko,
J'ai décochè umf, zeitgeist et onboard dans "Programmes au démarrage" : Rien de changé, à part le passage de mdp à la dispo du bureau passé de 59" à 1'... Les mises à jour (quasi) quotidiennes y sont peut-être pour quelque chose.
L'idée de malbo de réinstaller proprement la 16.04 me séduit, car je n'ose pas désactiver d'autres programmes par manque de connaissances.
Celle de tarkan, d'installer xubuntu me plait bien aussi, si je gagne en réactivité mais si je garde l'utilisation de la logithèque d'ubuntu....
Cordialement.
Lenovo ideapad 500-15lsk, Ubuntu 16.04 LTS en dual boot Win 10
Samsung NP300E7A, Debian 9.4, Cinnamon 3.2.7 en monoboot
Hors ligne
#21 Le 10/11/2016, à 01:05
- catsey
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
Bonsoir à tous,
Impossible d'optimiser le démarrage de mon ubuntu...
J'ai donc décidé de suivre le conseil de malbo de le réinstaller proprement. Mais avant, j'ai installé, comme le suggérait tarkan, xubuntu pour essais, d'abord en test sur ma live usb, et maintenant, il est installé... Quelques petits soucis, mais rien de grave.
Je passe en résolu.
Merci à vous !
Cordialement.
Lenovo ideapad 500-15lsk, Ubuntu 16.04 LTS en dual boot Win 10
Samsung NP300E7A, Debian 9.4, Cinnamon 3.2.7 en monoboot
Hors ligne
#22 Le 10/11/2016, à 10:09
- catsey
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
Les temps de démarrage relevés avec ubuntu "upgradé" étaient :
catsey a écrit :
Démarrage -> Grub : 7s
Grub -> demande mdp : 59s
mdp -> affichage bureau : 40s
Avec xubuntu installé proprement, je passe à :
Démarrage -> Grub : 7s
Grub -> demande mdp : 49s
mdp -> affichage bureau : 8s
Sans surprise, l'affichage de grub ne change pas, je ne gagne "que" 10" pour la demande de mdp. En revanche, l'affichage du bureau Xfce est sans appel !
Si j'ai le temps, je réinstallerai ubuntu proprement pour voir...
@+
Cordialement.
Lenovo ideapad 500-15lsk, Ubuntu 16.04 LTS en dual boot Win 10
Samsung NP300E7A, Debian 9.4, Cinnamon 3.2.7 en monoboot
Hors ligne
#23 Le 10/11/2016, à 10:30
- malbo
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
catsey a écrit :
Si j'ai le temps, je réinstallerai ubuntu proprement pour voir...
Ce serait intéressant parce que Ubuntu 16.04.1 est maintenu jusqu'en avril 2021 (source) alors que Xubuntu 16.04.1 est maintenu jusqu'en avril 2019 seulement (source) (4 ans et demie contre 2 ans et demie d'assistance technique). Sauf si tu es tombé sous le charme de l'environnement de bureau XFCE (il faut juste aimer le rustique).
Dernière modification par malbo (Le 10/11/2016, à 10:34)
Hors ligne
#24 Le 10/11/2016, à 12:50
- catsey
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
Bonjour malbo,
Il est vrai que cet environnement Xfce (que l'on peut transformer en apparence windows) est plutôt rustique. Il me plait (j'ai déjà eu du mal à apprécier le passage à win xp 
), mais j'aimais bien aussi Unity et je commençais à l'apprivoiser... Là je redécouvre, et Xfce me semble un peu moins intuitif, à confirmer.
Bref, je reste comme ça pour le moment car j'ai l'intention de faire un réinstall de mon win 7 qui rame non seulement au démarrage, mais même en utilisation de bureautique ! Là, j'ai bien peur de casser tout. En effet, j'ai cru comprendre qu'en dual boot, il était préférable d'installer d'abord win, et ensuite les autres os.
Reste encore la question de savoir si je peux passer en efi, et si oui si c'est préférable.... J'ouvrirai une discussion le moment venu.
Selon toi, que va-t-il se passer en cas de réinstallation de win ?
Cordialement.
Lenovo ideapad 500-15lsk, Ubuntu 16.04 LTS en dual boot Win 10
Samsung NP300E7A, Debian 9.4, Cinnamon 3.2.7 en monoboot
Hors ligne
#25 Le 10/11/2016, à 13:50
- malbo
Re : [Résolu] Démarrage long d'ubuntu 16.04 lts
catsey a écrit :
j'ai déjà eu du mal à apprécier le passage à win xp
C'est vrai que Xubuntu, ce n'est pas trop loin de Windows 95.
catsey a écrit :
Selon toi, que va-t-il se passer en cas de réinstallation de win ?
Je te prie de faire un Boot-Info depuis une session de ton Xubuntu installé, puis de donner l'URL de ce Boot-Info dans ta réponse afin que j'aie une vision fraîche de ton installation actuelle. Cela me permettra de répondre plus sûrement à ta question.
Dernière modification par malbo (Le 10/11/2016, à 13:57)
Hors ligne