#1 Le 25/08/2016, à 07:06
- tarkan99
[resolu] xubuntu 16.04 sur probook : le curseur disparait
bonjour,
Je termine l'installation de xubuntu sur un probook (carte graphique intel).
Je suis tombé sur le bug du curseur qui disparaît après
- mise en veille
- verrouillage de la session
A noter que sur l'écran de choix d'utilisateur, le curseur apparaît bien ! et il disparait
à l'entrée dans la session.
Ctrl alt F1 puis Ctrl Alt F7 fait revenir le curseur mais bon, c'est pas une solution pérenne.
J'ai trouvé des solutions mais aucune ne convient.
Je n'avais pas de fichier xorg.conf.
J'ai crée ceci :
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "TearFree" "true"
Option "HWcursor" "false"
EndSectionavec ou sans : pas de changement.
voici xorg.log0
[ 92.694]
X.Org X Server 1.18.3
Release Date: 2016-04-04
[ 92.694] X Protocol Version 11, Revision 0
[ 92.694] Build Operating System: Linux 3.13.0-92-generic x86_64 Ubuntu
[ 92.694] Current Operating System: Linux proBK 4.4.0-34-generic #53-Ubuntu SMP Wed Jul 27 16:06:39 UTC 2016 x86_64
[ 92.694] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-34-generic root=UUID=9ccb25a0-69f8-4bbf-bec4-fceb9ce2f142 ro quiet splash vt.handoff=7
[ 92.694] Build Date: 22 July 2016 07:50:34AM
[ 92.694] xorg-server 2:1.18.3-1ubuntu2.3 (For technical support please see http://www.ubuntu.com/support)
[ 92.694] Current version of pixman: 0.33.6
[ 92.695] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 92.695] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 92.695] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 25 06:42:28 2016
[ 92.695] (==) Using config file: "/etc/X11/xorg.conf"
[ 92.695] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 92.695] (==) No Layout section. Using the first Screen section.
[ 92.695] (==) No screen section available. Using defaults.
[ 92.695] (**) |-->Screen "Default Screen Section" (0)
[ 92.695] (**) | |-->Monitor "<default monitor>"
[ 92.698] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 92.698] (**) | |-->Device "Intel Graphics"
[ 92.698] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 92.698] (==) Automatically adding devices
[ 92.698] (==) Automatically enabling devices
[ 92.698] (==) Automatically adding GPU devices
[ 92.698] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 92.698] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 92.698] Entry deleted from font path.
[ 92.698] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 92.698] Entry deleted from font path.
[ 92.698] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 92.698] Entry deleted from font path.
[ 92.698] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 92.698] Entry deleted from font path.
[ 92.698] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 92.698] Entry deleted from font path.
[ 92.698] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 92.698] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 92.698] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 92.698] (II) Loader magic: 0x563e918ecda0
[ 92.698] (II) Module ABI versions:
[ 92.698] X.Org ANSI C Emulation: 0.4
[ 92.698] X.Org Video Driver: 20.0
[ 92.698] X.Org XInput driver : 22.1
[ 92.698] X.Org Server Extension : 9.0
[ 92.700] (++) using VT number 7
[ 92.700] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 92.701] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 92.703] (--) PCI:*(0:0:2:0) 8086:0116:103c:1619 rev 9, Mem @ 0xd4000000/4194304, 0xc0000000/268435456, I/O @ 0x00004000/64
[ 92.703] (II) LoadModule: "glx"
[ 92.703] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 92.704] (II) Module glx: vendor="X.Org Foundation"
[ 92.704] compiled for 1.18.3, module version = 1.0.0
[ 92.704] ABI class: X.Org Server Extension, version 9.0
[ 92.704] (==) AIGLX enabled
[ 92.704] (II) LoadModule: "intel"
[ 92.705] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 92.705] (II) Module intel: vendor="X.Org Foundation"
[ 92.705] compiled for 1.18.1, module version = 2.99.917
[ 92.705] Module class: X.Org Video Driver
[ 92.705] ABI class: X.Org Video Driver, version 20.0
[ 92.705] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 92.705] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 92.705] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 92.705] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 92.706] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[ 92.706] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1 (Timo Aaltonen <tjaalton@debian.org>)
[ 92.706] (II) intel(0): SNA compiled for use with valgrind
[ 92.706] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 92.706] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
[ 92.706] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 92.706] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 92.706] (==) intel(0): RGB weight 888
[ 92.706] (==) intel(0): Default visual is TrueColor
[ 92.706] (**) intel(0): Option "TearFree" "true"
[ 92.707] (II) intel(0): Output LVDS1 has no monitor section
[ 92.716] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[ 92.716] (II) intel(0): Enabled output LVDS1
[ 92.716] (II) intel(0): Output VGA1 has no monitor section
[ 92.716] (II) intel(0): Enabled output VGA1
[ 92.716] (II) intel(0): Output HDMI1 has no monitor section
[ 92.716] (II) intel(0): Enabled output HDMI1
[ 92.716] (II) intel(0): Output DP1 has no monitor section
[ 92.716] (II) intel(0): Enabled output DP1
[ 92.716] (II) intel(0): Output HDMI2 has no monitor section
[ 92.716] (II) intel(0): Enabled output HDMI2
[ 92.716] (II) intel(0): Output HDMI3 has no monitor section
[ 92.716] (II) intel(0): Enabled output HDMI3
[ 92.716] (II) intel(0): Output DP2 has no monitor section
[ 92.716] (II) intel(0): Enabled output DP2
[ 92.716] (II) intel(0): Output DP3 has no monitor section
[ 92.716] (II) intel(0): Enabled output DP3
[ 92.716] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 92.716] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 92.716] (II) intel(0): Enabled output VIRTUAL1
[ 92.716] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 92.717] (**) intel(0): TearFree enabled
[ 92.717] (==) intel(0): DPI set to (96, 96)
[ 92.717] (II) Loading sub module "dri2"
[ 92.717] (II) LoadModule: "dri2"
[ 92.717] (II) Module "dri2" already built-in
[ 92.717] (II) Loading sub module "present"
[ 92.717] (II) LoadModule: "present"
[ 92.717] (II) Module "present" already built-in
[ 92.717] (==) Depth 24 pixmap format is 32 bpp
[ 92.717] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[ 92.717] (==) intel(0): Backing store enabled
[ 92.717] (==) intel(0): Silken mouse enabled
[ 92.717] (II) intel(0): HW Cursor enabled
[ 92.717] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 92.718] (==) intel(0): DPMS enabled
[ 92.718] (==) intel(0): Display hotplug detection enabled
[ 92.718] (II) intel(0): [DRI2] Setup complete
[ 92.718] (II) intel(0): [DRI2] DRI driver: i965
[ 92.718] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 92.718] (II) intel(0): direct rendering: DRI2 enabled
[ 92.718] (II) intel(0): hardware support for Present enabled
[ 92.718] (WW) intel(0): Option "HWcursor" is not used
[ 92.718] (--) RandR disabled
[ 92.724] (II) SELinux: Disabled on system
[ 92.735] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 92.735] (II) AIGLX: enabled GLX_ARB_create_context
[ 92.735] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 92.735] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 92.735] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 92.735] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 92.735] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 92.735] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 92.735] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 92.735] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 92.735] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 92.735] (II) AIGLX: Loaded and initialized i965
[ 92.735] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 92.740] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 92.740] (II) intel(0): Setting screen physical size to 361 x 203
[ 92.786] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 92.786] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 92.786] (II) LoadModule: "evdev"
[ 92.786] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 92.786] (II) Module evdev: vendor="X.Org Foundation"
[ 92.786] compiled for 1.18.1, module version = 2.10.1
[ 92.786] Module class: X.Org XInput Driver
[ 92.786] ABI class: X.Org XInput driver, version 22.1
[ 92.786] (II) Using input driver 'evdev' for 'Power Button'
[ 92.786] (**) Power Button: always reports core events
[ 92.786] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 92.786] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 92.786] (--) evdev: Power Button: Found keys
[ 92.786] (II) evdev: Power Button: Configuring as keyboard
[ 92.787] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 92.787] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 92.787] (**) Option "xkb_rules" "evdev"
[ 92.787] (**) Option "xkb_model" "pc105"
[ 92.787] (**) Option "xkb_layout" "fr"
[ 92.787] (**) Option "xkb_variant" "nodeadkeys"
[ 92.810] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 92.810] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 92.810] (II) Using input driver 'evdev' for 'Video Bus'
[ 92.810] (**) Video Bus: always reports core events
[ 92.810] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 92.810] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 92.810] (--) evdev: Video Bus: Found keys
[ 92.810] (II) evdev: Video Bus: Configuring as keyboard
[ 92.810] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13/event5"
[ 92.810] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 92.810] (**) Option "xkb_rules" "evdev"
[ 92.810] (**) Option "xkb_model" "pc105"
[ 92.810] (**) Option "xkb_layout" "fr"
[ 92.810] (**) Option "xkb_variant" "nodeadkeys"
[ 92.810] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 92.810] (II) No input driver specified, ignoring this device.
[ 92.810] (II) This device may have been added with another device file.
[ 92.811] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 92.811] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 92.811] (II) Using input driver 'evdev' for 'Sleep Button'
[ 92.811] (**) Sleep Button: always reports core events
[ 92.811] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[ 92.811] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 92.811] (--) evdev: Sleep Button: Found keys
[ 92.811] (II) evdev: Sleep Button: Configuring as keyboard
[ 92.811] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 92.811] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 92.811] (**) Option "xkb_rules" "evdev"
[ 92.811] (**) Option "xkb_model" "pc105"
[ 92.811] (**) Option "xkb_layout" "fr"
[ 92.811] (**) Option "xkb_variant" "nodeadkeys"
[ 92.812] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[ 92.812] (II) No input driver specified, ignoring this device.
[ 92.812] (II) This device may have been added with another device file.
[ 92.812] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)
[ 92.812] (II) No input driver specified, ignoring this device.
[ 92.812] (II) This device may have been added with another device file.
[ 92.812] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event11)
[ 92.812] (II) No input driver specified, ignoring this device.
[ 92.812] (II) This device may have been added with another device file.
[ 92.813] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 92.813] (II) No input driver specified, ignoring this device.
[ 92.813] (II) This device may have been added with another device file.
[ 92.813] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[ 92.813] (II) No input driver specified, ignoring this device.
[ 92.813] (II) This device may have been added with another device file.
[ 92.813] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event14)
[ 92.813] (II) No input driver specified, ignoring this device.
[ 92.813] (II) This device may have been added with another device file.
[ 92.813] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event15)
[ 92.813] (II) No input driver specified, ignoring this device.
[ 92.813] (II) This device may have been added with another device file.
[ 92.814] (II) config/udev: Adding input device Logitech M325 (/dev/input/event4)
[ 92.814] (**) Logitech M325: Applying InputClass "evdev pointer catchall"
[ 92.814] (II) Using input driver 'evdev' for 'Logitech M325'
[ 92.814] (**) Logitech M325: always reports core events
[ 92.814] (**) evdev: Logitech M325: Device: "/dev/input/event4"
[ 92.814] (--) evdev: Logitech M325: Vendor 0x46d Product 0x400a
[ 92.814] (--) evdev: Logitech M325: Found 20 mouse buttons
[ 92.814] (--) evdev: Logitech M325: Found scroll wheel(s)
[ 92.814] (--) evdev: Logitech M325: Found relative axes
[ 92.814] (--) evdev: Logitech M325: Found x and y relative axes
[ 92.814] (II) evdev: Logitech M325: Configuring as mouse
[ 92.814] (II) evdev: Logitech M325: Adding scrollwheel support
[ 92.814] (**) evdev: Logitech M325: YAxisMapping: buttons 4 and 5
[ 92.814] (**) evdev: Logitech M325: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 92.814] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/0003:046D:C52B.0003/0003:046D:400A.0004/input/input12/event4"
[ 92.814] (II) XINPUT: Adding extended input device "Logitech M325" (type: MOUSE, id 9)
[ 92.814] (II) evdev: Logitech M325: initialized for relative axes.
[ 92.814] (**) Logitech M325: (accel) keeping acceleration scheme 1
[ 92.814] (**) Logitech M325: (accel) acceleration profile 0
[ 92.814] (**) Logitech M325: (accel) acceleration factor: 2.000
[ 92.814] (**) Logitech M325: (accel) acceleration threshold: 4
[ 92.815] (II) config/udev: Adding input device Logitech M325 (/dev/input/mouse0)
[ 92.815] (II) No input driver specified, ignoring this device.
[ 92.815] (II) This device may have been added with another device file.
[ 92.815] (II) config/udev: Adding input device HP HD Webcam [Fixed] (/dev/input/event16)
[ 92.815] (**) HP HD Webcam [Fixed]: Applying InputClass "evdev keyboard catchall"
[ 92.815] (II) Using input driver 'evdev' for 'HP HD Webcam [Fixed]'
[ 92.815] (**) HP HD Webcam [Fixed]: always reports core events
[ 92.815] (**) evdev: HP HD Webcam [Fixed]: Device: "/dev/input/event16"
[ 92.815] (--) evdev: HP HD Webcam [Fixed]: Vendor 0x1bcf Product 0x2805
[ 92.815] (--) evdev: HP HD Webcam [Fixed]: Found keys
[ 92.815] (II) evdev: HP HD Webcam [Fixed]: Configuring as keyboard
[ 92.815] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input23/event16"
[ 92.815] (II) XINPUT: Adding extended input device "HP HD Webcam [Fixed]" (type: KEYBOARD, id 10)
[ 92.815] (**) Option "xkb_rules" "evdev"
[ 92.815] (**) Option "xkb_model" "pc105"
[ 92.815] (**) Option "xkb_layout" "fr"
[ 92.818] (**) Option "xkb_variant" "nodeadkeys"
[ 92.818] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 92.818] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 92.818] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 92.818] (**) AT Translated Set 2 keyboard: always reports core events
[ 92.818] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 92.819] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 92.819] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 92.819] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 92.819] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 92.819] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 92.819] (**) Option "xkb_rules" "evdev"
[ 92.819] (**) Option "xkb_model" "pc105"
[ 92.819] (**) Option "xkb_layout" "fr"
[ 92.819] (**) Option "xkb_variant" "nodeadkeys"
[ 92.819] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 92.819] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 92.819] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[ 92.819] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 92.819] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 92.819] (II) LoadModule: "synaptics"
[ 92.819] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 92.819] (II) Module synaptics: vendor="X.Org Foundation"
[ 92.819] compiled for 1.18.1, module version = 1.8.2
[ 92.819] Module class: X.Org XInput Driver
[ 92.819] ABI class: X.Org XInput driver, version 22.1
[ 92.819] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 92.820] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 92.820] (**) Option "Device" "/dev/input/event6"
[ 92.884] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 92.884] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5690 (res 40)
[ 92.884] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4854 (res 74)
[ 92.884] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 92.884] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 92.884] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 92.884] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 92.884] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 92.884] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 92.908] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input11/event6"
[ 92.908] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 92.908] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 92.908] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 92.908] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[ 92.908] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 92.908] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 92.908] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 92.908] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 92.908] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 92.909] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 92.909] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 92.910] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event7)
[ 92.910] (II) No input driver specified, ignoring this device.
[ 92.910] (II) This device may have been added with another device file.
[ 92.910] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 92.910] (II) No input driver specified, ignoring this device.
[ 92.910] (II) This device may have been added with another device file.
[ 92.914] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event8)
[ 92.914] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 92.914] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 92.914] (**) HP WMI hotkeys: always reports core events
[ 92.914] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event8"
[ 92.914] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 92.914] (--) evdev: HP WMI hotkeys: Found keys
[ 92.914] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 92.914] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event8"
[ 92.914] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[ 92.914] (**) Option "xkb_rules" "evdev"
[ 92.914] (**) Option "xkb_model" "pc105"
[ 92.914] (**) Option "xkb_layout" "fr"
[ 92.914] (**) Option "xkb_variant" "nodeadkeys"
[ 94.716] (II) intel(0): EDID vendor "CMO", prod id 5537
[ 94.716] (II) intel(0): Printing DDC gathered Modelines:
[ 94.716] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 348.344] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 355.317] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 355.317] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 355.734] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 360.108] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 360.938] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 360.939] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 360.955] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 1035.364] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1042.057] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 1042.057] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 1042.475] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 1045.900] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1049.219] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 1049.219] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 1049.232] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad foundquelqu'un aurait une idée ?
Merci d'avance !
Dernière modification par tarkan99 (Le 26/08/2016, à 22:34)
xubuntu 22.04.1 sur machine assemblée base de Core i5 9400
Hors ligne
#2 Le 24/10/2016, à 00:26
- CladX
Re : [resolu] xubuntu 16.04 sur probook : le curseur disparait
Petit up, j'ai le même souci, disparition du curseur apres retour de veille, et absence de xorg.conf dans mon xubuntu 16.04
QQ à une piste ? (les topics comme https://forum.ubuntu-fr.org/viewtopic.php?pid=1505226 ne sont pas adaptés aux nouveaux serveur graphique)
Ma bombe : ubuntu 10.04 - Core2 2.13go - 4go ram - SSD X25-M 80go - p5kplam- 2 nvidia - quadruple screens ;-)
Portable : ubuntu 10.10 Butterfly 4go ram - 320hdd - dalle capacitive - tactile et bientôt multi touch ;-)
Windows ? Pas chez moi depuis près de 6ans et ça ne me manque pas !
Producteur de Santimancho -> http://www.necliquepasici.com/
Hors ligne
#3 Le 24/10/2016, à 09:18
- tarkan99
Re : [resolu] xubuntu 16.04 sur probook : le curseur disparait
Salut !
donne le retour de
uname -apour connaître ta version de xub.
Je viens de voir que je n'avais pas indiqué la solution : une mise à jour.
xubuntu 22.04.1 sur machine assemblée base de Core i5 9400
Hors ligne
#4 Le 29/10/2016, à 22:42
- CladX
Re : [resolu] xubuntu 16.04 sur probook : le curseur disparait
heu voila :
cladx@cladx-Aspire-VN7-791:~$ uname -a
Linux cladx-Aspire-VN7-791 4.4.0-45-generic #66-Ubuntu SMP Wed Oct 19 14:12:37 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
cladx@cladx-Aspire-VN7-791:~$ Merci ! du retour (je pense que les dépendances sont à jour)
Ma bombe : ubuntu 10.04 - Core2 2.13go - 4go ram - SSD X25-M 80go - p5kplam- 2 nvidia - quadruple screens ;-)
Portable : ubuntu 10.10 Butterfly 4go ram - 320hdd - dalle capacitive - tactile et bientôt multi touch ;-)
Windows ? Pas chez moi depuis près de 6ans et ça ne me manque pas !
Producteur de Santimancho -> http://www.necliquepasici.com/
Hors ligne
#5 Le 30/10/2016, à 09:15
- tarkan99
Re : [resolu] xubuntu 16.04 sur probook : le curseur disparait
basculer en mode console et revenir en mode graphique fait-il réapparaitre le curseur ?
via ctrl alt f6 puis ctrl alt f7
xubuntu 22.04.1 sur machine assemblée base de Core i5 9400
Hors ligne
#6 Le 01/11/2016, à 10:37
- tarkan99
Re : [resolu] xubuntu 16.04 sur probook : le curseur disparait
Le sujet étant indiqué resolu, je te conseille d'ouvrir ton propre fil.
xubuntu 22.04.1 sur machine assemblée base de Core i5 9400
Hors ligne