#1 Le 18/10/2016, à 17:55
- linju
probleme de connexion internet dns?
Bonjour à tous,
J'ai un problème de connexion internet sur mon pc de bureau que je n'arrive pas à résoudre. Après avoir essayé plusieurs choses, je m'en retourne vers la communauté 
D'abord les différents retour de commande:
ifconfig
eth1 Link encap:Ethernet HWaddr e0:3f:49:12:f6:85
inet adr:192.168.1.48 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: fe80::e23f:49ff:fe12:f685/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:491 erreurs:0 :0 overruns:0 frame:0
TX packets:417 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:37706 (37.7 KB) Octets transmis:35322 (35.3 KB)
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:65536 Metric:1
Packets reçus:22988 erreurs:0 :0 overruns:0 frame:0
TX packets:22988 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1
Octets reçus:1702032 (1.7 MB) Octets transmis:1702032 (1.7 MB)cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback ping -c 3 173.194.34.24
PING 173.194.34.24 (173.194.34.24) 56(84) bytes of data.
--- 173.194.34.24 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 2014msping -c 3 google.fr
ping: unknown host google.frdig google.fr
; <<>> DiG 9.10.3-P4-Ubuntu <<>> google.fr
;; global options: +cmd
;; connection timed out; no servers could be reachedCe que j'ai fait:
sudo apt-get purge resolvconfEnsuite,
sudo nano /etc/resolv.confEt là, j'ai bloqué... En fait je ne comprends pas comment me servir de nano... ça peut paraître bête mais bon, j'ai donc quitté. Je voulais suivre les instructions de ce topic: https://forum.ubuntu-fr.org/viewtopic.php?id=1518951
Donc, voilà où j'en suis, j'ai ensuite essayé d'édité resolv.conf avec gedit:
sudo gedit /etc/resolv.confmais impossible d'écrire dessus, j'ai d'ailleurs un dossier resolv.conf.tmp qui existe sur lequel est écrit:
# Generated by NetworkManager
nameserver 127.0.1.1
nameserver 8.8.8.8
nameserver 8.8.4.4Voilà, je vous remercie d'avance pour votre aide
Hors ligne
#2 Le 18/10/2016, à 19:28
- sinbad83
Re : probleme de connexion internet dns?
Bonjour,
essaye la commande
sudo service dns-clean restart ; sudo service network-interface restart INTERFACE=eth1La connaissance n'est pas une denrée rare, il faut la partager avec les autres.
Linux registered #484707
Site: www.coursinforev.org/doku.php
Desktop AMD Ryzen 5-3600, RAM 16GB, Ubuntu 20.10, HP Pavillon G6 Ubuntu 20.10 et Ten, Serveur Ubuntu 18.04
Hors ligne
#3 Le 18/10/2016, à 19:37
- linju
Re : probleme de connexion internet dns?
Voilà le retour:
sudo service dns-clean restart ; sudo service network-interface restart INTERFACE=eth1
Job for dns-clean.service failed because the control process exited with error code. See "systemctl status dns-clean.service" and "journalctl -xe" for details.
Failed to restart network-interface.service: Unit network-interface.service not found.Hors ligne
#4 Le 18/10/2016, à 19:59
- sinbad83
Re : probleme de connexion internet dns?
Regarde les messages d'erreur sur systemctl status dns-clean.service et journalctl -xejournalctl -xe
La connaissance n'est pas une denrée rare, il faut la partager avec les autres.
Linux registered #484707
Site: www.coursinforev.org/doku.php
Desktop AMD Ryzen 5-3600, RAM 16GB, Ubuntu 20.10, HP Pavillon G6 Ubuntu 20.10 et Ten, Serveur Ubuntu 18.04
Hors ligne
#5 Le 18/10/2016, à 20:51
- linju
Re : probleme de connexion internet dns?
Je ne sais si je tape la bonne commande mais ce que j'ai en faisant ça:
see sytemctl status dns-clean.service
Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/%{ <-- HERE (.*?)}/ at /usr/bin/see line 528.
Error: no such file "sytemctl"
Error: no such file "status"
Error: no such file "dns-clean.service"Hors ligne
#6 Le 19/10/2016, à 20:02
- sinbad83
Re : probleme de connexion internet dns?
On change pour dmesg. Lance pour voir le log page par page
dmesg | moreLa connaissance n'est pas une denrée rare, il faut la partager avec les autres.
Linux registered #484707
Site: www.coursinforev.org/doku.php
Desktop AMD Ryzen 5-3600, RAM 16GB, Ubuntu 20.10, HP Pavillon G6 Ubuntu 20.10 et Ten, Serveur Ubuntu 18.04
Hors ligne
#7 Le 19/10/2016, à 20:03
- sinbad83
Re : probleme de connexion internet dns?
On change pour dmesg. Lance pour voir le log page par page
dmesg | moreCe sera mieux si tu lances la commande après redémarrage, tu auras moins d'informations à dépouiller.
Dernière modification par sinbad83 (Le 19/10/2016, à 20:05)
La connaissance n'est pas une denrée rare, il faut la partager avec les autres.
Linux registered #484707
Site: www.coursinforev.org/doku.php
Desktop AMD Ryzen 5-3600, RAM 16GB, Ubuntu 20.10, HP Pavillon G6 Ubuntu 20.10 et Ten, Serveur Ubuntu 18.04
Hors ligne
#8 Le 20/10/2016, à 12:24
- linju
Re : probleme de connexion internet dns?
Ok, je suis en déplacement et n'ai pas accès à mon pc en ce moment, je fais ça dès mon retour.
Hors ligne
#9 Le 22/10/2016, à 10:43
- linju
Re : probleme de connexion internet dns?
Voilà ce que j'ai, c'est fichtrement long...
dmesg | more
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-43-generic (buildd@lgw01-22) (gcc version 5.4
.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #63-Ubuntu SMP Wed Oct 12 13:48:03
UTC 2016 (Ubuntu 4.4.0-43.63-generic 4.4.21)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-43-generic root=UUID
=040b29d2-ef69-4c1d-817c-c9908398db4e ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] tseg: 00af000000
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point regis
ters'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes,
using 'standard' format.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ad388fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ad389000-0x00000000ad3b8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ad3b9000-0x00000000ad3c8fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ad3c9000-0x00000000ad727fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ad728000-0x00000000ae58bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae58c000-0x00000000ae58cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae58d000-0x00000000ae792fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ae793000-0x00000000aebc8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aebc9000-0x00000000aeff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aeff4000-0x00000000aeffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: System manufacturer System Product Name/A55BM-E, BIOS 1101 1
2/06/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 0000A0000000 mask FFFFF8000000 write-back
[ 0.000000] 3 base 0000A8000000 mask FFFFFC000000 write-back
[ 0.000000] 4 base 0000AC000000 mask FFFFFE000000 write-back
[ 0.000000] 5 base 0000AE000000 mask FFFFFF000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000011f000000 aka 4592M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xaf000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xaf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf] mapped at [ffff
8800000fd7b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[ 0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[ 0.000000] BRK [0x02206000, 0x02206fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x337c6000-0x35bdafff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000AD3C1078 000064 (v01 ALASKA A M I 0107200
9 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000AD3C7C68 00010C (v05 ALASKA A M I 0107200
9 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has
zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
[ 0.000000] ACPI: DSDT 0x00000000AD3C1170 006AF8 (v02 ALASKA A M I 0000000
0 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000AD71D080 000040
[ 0.000000] ACPI: APIC 0x00000000AD3C7D78 000072 (v03 ALASKA A M I 0107200
9 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000AD3C7DF0 000044 (v01 ALASKA A M I 0107200
9 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000AD3C7E38 00003C (v01 ALASKA A M I 0107200
9 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000AD3C7E78 000038 (v01 ALASKA A M I 0107200
9 AMI 00000005)
[ 0.000000] ACPI: BGRT 0x00000000AD3C8A78 000038 (v00 ALASKA A M I 0107200
9 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000AD3C7F08 0006B2 (v01 AMD BANTRY 0000000
1 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000AD3C85C0 0004B7 (v02 AMD BANTRY 0000000
1 MSFT 04000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x11eff7000-0x11effbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000011effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ad388fff]
[ 0.000000] node 0: [mem 0x00000000ae58c000-0x00000000ae58cfff]
[ 0.000000] node 0: [mem 0x00000000ae793000-0x00000000aebc8fff]
[ 0.000000] node 0: [mem 0x00000000aeff4000-0x00000000aeffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff]
[ 0.000000] On node 0 totalpages: 837481
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11040 pages used for memmap
[ 0.000000] DMA32 zone: 706508 pages, LIFO batch:31
[ 0.000000] Normal zone: 1984 pages used for memmap
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xad389000-0xad3b8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xad3b9000-0xad3c8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xad3c9000-0xad727fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xad728000-0xae58bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae58d000-0xae792fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaebc9000-0xaeff3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xaf000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffff
ffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_nod
e_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88011ec00000 s98008 r8192 d289
68 u524288
[ 0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pag
es: 824372
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-43-generic ro
ot=UUID=040b29d2-ef69-4c1d-817c-c9908398db4e ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3174316K/3349924K available (8409K kernel code, 1283K rwd
ata, 3944K rodata, 1480K init, 1292K bss, 175608K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16640 nr_irqs:456 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_i
dle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3890.139 MHz processor
[ 0.000022] Calibrating delay loop (skipped), value calculated using timer fr
equency.. 7780.27 BogoMIPS (lpj=15560556)
[ 0.000024] pid_max: default: 32768 minimum: 301
[ 0.000030] ACPI: Core revision 20150930
[ 0.003047] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.003066] Security Framework initialized
[ 0.003067] Yama: becoming mindful.
[ 0.003083] AppArmor: AppArmor initialized
[ 0.003333] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes
)
[ 0.004636] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.005259] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.005268] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.005503] Initializing cgroup subsys io
[ 0.005508] Initializing cgroup subsys memory
[ 0.005518] Initializing cgroup subsys devices
[ 0.005537] Initializing cgroup subsys freezer
[ 0.005541] Initializing cgroup subsys net_cls
[ 0.005543] Initializing cgroup subsys perf_event
[ 0.005545] Initializing cgroup subsys net_prio
[ 0.005550] Initializing cgroup subsys hugetlb
[ 0.005552] Initializing cgroup subsys pids
[ 0.005573] CPU: Physical Processor ID: 0
[ 0.005574] CPU: Processor Core ID: 0
[ 0.005576] mce: CPU supports 7 MCE banks
[ 0.005588] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.005589] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.005836] Freeing SMP alternatives memory: 32K (ffffffff820b4000 - ffffffff
820bc000)
[ 0.007157] ftrace: allocating 32007 entries in 126 pages
[ 0.016519] smpboot: Max logical packages: 4
[ 0.016523] smpboot: APIC(10) Converting physical 1 to logical package 0
[ 0.016836] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.161532] smpboot: CPU0: AMD A6-6400K APU with Radeon(tm) HD Graphics (fami
ly: 0x15, model: 0x13, stepping: 0x1)
[ 0.161548] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.161552] ... version: 0
[ 0.161553] ... bit width: 48
[ 0.161554] ... generic registers: 6
[ 0.161555] ... value mask: 0000ffffffffffff
[ 0.161555] ... max period: 00007fffffffffff
[ 0.161556] ... fixed-purpose events: 0
[ 0.161557] ... event mask: 000000000000003f
[ 0.162195] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PM
U counter.
[ 0.162264] x86: Booting SMP configuration:
[ 0.162266] .... node #0, CPUs: #1
[ 0.164452] x86: Booted up 1 node, 2 CPUs
[ 0.164455] smpboot: Total of 2 processors activated (15560.55 BogoMIPS)
[ 0.164815] devtmpfs: initialized
[ 0.167073] evm: security.selinux
[ 0.167074] evm: security.SMACK64
[ 0.167075] evm: security.SMACK64EXEC
[ 0.167076] evm: security.SMACK64TRANSMUTE
[ 0.167077] evm: security.SMACK64MMAP
[ 0.167077] evm: security.ima
[ 0.167078] evm: security.capability
[ 0.167131] PM: Registering ACPI NVS region [mem 0xad3c9000-0xad727fff] (3534
848 bytes)
[ 0.167172] PM: Registering ACPI NVS region [mem 0xae58d000-0xae792fff] (2121
728 bytes)
[ 0.167256] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma
x_idle_ns: 7645041785100000 ns
[ 0.167327] pinctrl core: initialized pinctrl subsystem
[ 0.167431] RTC time: 19:55:30, date: 10/18/16
[ 0.167532] NET: Registered protocol family 16
[ 0.176505] cpuidle: using governor ladder
[ 0.184504] cpuidle: using governor menu
[ 0.184519] PCCT header not found.
[ 0.184620] ACPI: bus type PCI registered
[ 0.184622] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.184696] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfb
ffffff] (base 0xf8000000)
[ 0.184698] PCI: not using MMCONFIG
[ 0.184699] PCI: Using configuration type 1 for base access
[ 0.184700] PCI: Using configuration type 1 for extended access
[ 0.196882] ACPI: Added _OSI(Module Device)
[ 0.196885] ACPI: Added _OSI(Processor Device)
[ 0.196886] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.196887] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.198167] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.199753] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.200113] ACPI: Interpreter enabled
[ 0.200118] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_
] (20150930/hwxface-580)
[ 0.200122] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_
] (20150930/hwxface-580)
[ 0.200132] ACPI: (supports S0 S3 S4 S5)
[ 0.200134] ACPI: Using IOAPIC for interrupt routing
[ 0.200249] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfb
ffffff] (base 0xf8000000)
[ 0.200279] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI mot
herboard resources
[ 0.200285] PCI: Using host bridge windows from ACPI; if necessary, use "pci=
nocrs" and report a bug
[ 0.203360] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial br
ightness
[ 0.204722] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.204727] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM S
egments MSI]
[ 0.204851] acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PME
]
[ 0.204969] acpi PNP0A03:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.204979] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 0
0-3f] only partially covers this bridge
[ 0.205211] PCI host bridge to bus 0000:00
[ 0.205214] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.205216] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.205217] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.205218] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.205220] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff win
dow]
[ 0.205221] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff win
dow]
[ 0.205223] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff win
dow]
[ 0.205224] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.205231] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.205330] pci 0000:00:01.0: [1002:9996] type 00 class 0x030000
[ 0.205347] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.205353] pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
[ 0.205359] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.205393] pci 0000:00:01.0: supports D1 D2
[ 0.205473] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.205498] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
[ 0.205506] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
[ 0.205515] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
[ 0.205524] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
[ 0.205536] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
[ 0.205545] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4a000-0xfeb4a7ff]
[ 0.205632] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.205647] pci 0000:00:12.0: reg 0x10: [mem 0xfeb49000-0xfeb49fff]
[ 0.205731] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.205770] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.205794] pci 0000:00:12.2: reg 0x10: [mem 0xfeb48000-0xfeb480ff]
[ 0.205861] pci 0000:00:12.2: supports D1 D2
[ 0.205862] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.205897] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.205936] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.205950] pci 0000:00:13.0: reg 0x10: [mem 0xfeb47000-0xfeb47fff]
[ 0.206032] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.206069] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.206093] pci 0000:00:13.2: reg 0x10: [mem 0xfeb46000-0xfeb460ff]
[ 0.206160] pci 0000:00:13.2: supports D1 D2
[ 0.206161] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.206196] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.206235] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.206353] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.206378] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.206434] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.206469] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.206502] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.206622] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.206685] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.206725] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[ 0.206793] pci 0000:00:15.0: supports D1 D2
[ 0.206795] pci 0000:00:15.0: PME# supported from D0 D3hot D3cold
[ 0.206833] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.206873] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
[ 0.206941] pci 0000:00:15.2: supports D1 D2
[ 0.206943] pci 0000:00:15.2: PME# supported from D0 D3hot D3cold
[ 0.206981] pci 0000:00:15.2: System wakeup disabled by ACPI
[ 0.207020] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
[ 0.207035] pci 0000:00:16.0: reg 0x10: [mem 0xfeb45000-0xfeb45fff]
[ 0.207117] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.207154] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
[ 0.207178] pci 0000:00:16.2: reg 0x10: [mem 0xfeb44000-0xfeb440ff]
[ 0.207244] pci 0000:00:16.2: supports D1 D2
[ 0.207246] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.207280] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.207318] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.207388] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.207455] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.207523] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.207595] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.207662] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.207803] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[ 0.207812] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (sub
tractive decode)
[ 0.207813] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (sub
tractive decode)
[ 0.207815] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (sub
tractive decode)
[ 0.207816] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (sub
tractive decode)
[ 0.207818] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff wind
ow] (subtractive decode)
[ 0.207819] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff wind
ow] (subtractive decode)
[ 0.207820] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff wind
ow] (subtractive decode)
[ 0.207866] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.207941] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.207983] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.208013] pci 0000:03:00.0: reg 0x18: [mem 0xfea00000-0xfea00fff 64bit]
[ 0.208032] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref
]
[ 0.208107] pci 0000:03:00.0: supports D1 D2
[ 0.208108] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.208149] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.213627] pci 0000:00:15.2: PCI bridge to [bus 03]
[ 0.213635] pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
[ 0.213639] pci 0000:00:15.2: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.213644] pci 0000:00:15.2: bridge window [mem 0xf0000000-0xf00fffff 64bi
t pref]
[ 0.214153] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.214206] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.214259] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.214311] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0
[ 0.214353] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.214386] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.214419] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.214451] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.214694] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.214696] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem
,locks=none
[ 0.214700] vgaarb: loaded
[ 0.214701] vgaarb: bridge control possible 0000:00:01.0
[ 0.214915] SCSI subsystem initialized
[ 0.214960] libata version 3.00 loaded.
[ 0.214980] ACPI: bus type USB registered
[ 0.214995] usbcore: registered new interface driver usbfs
[ 0.215004] usbcore: registered new interface driver hub
[ 0.215015] usbcore: registered new device driver usb
[ 0.215143] PCI: Using ACPI for IRQ routing
[ 0.217087] PCI: pci_cache_line_size set to 64 bytes
[ 0.217136] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.217138] e820: reserve RAM buffer [mem 0xad389000-0xafffffff]
[ 0.217139] e820: reserve RAM buffer [mem 0xae58d000-0xafffffff]
[ 0.217140] e820: reserve RAM buffer [mem 0xaebc9000-0xafffffff]
[ 0.217141] e820: reserve RAM buffer [mem 0xaf000000-0xafffffff]
[ 0.217142] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
[ 0.217243] NetLabel: Initializing
[ 0.217245] NetLabel: domain hash size = 128
[ 0.217245] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.217254] NetLabel: unlabeled traffic allowed by default
[ 0.217328] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.217331] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.219368] clocksource: Switched to clocksource hpet
[ 0.225924] AppArmor: AppArmor Filesystem Enabled
[ 0.225997] pnp: PnP ACPI init
[ 0.226120] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.226124] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.226255] system 00:01: [io 0x0300-0x031f] has been reserved
[ 0.226257] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.226259] system 00:01: [io 0x0230-0x023f] has been reserved
[ 0.226261] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.226504] pnp 00:02: [dma 0 disabled]
[ 0.226599] pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.226622] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.226714] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.226716] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.226751] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.226942] pnp 00:06: [dma 0 disabled]
[ 0.226979] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.227174] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.227176] system 00:07: [io 0x040b] has been reserved
[ 0.227177] system 00:07: [io 0x04d6] has been reserved
[ 0.227179] system 00:07: [io 0x0c00-0x0c01] has been reserved
[ 0.227181] system 00:07: [io 0x0c14] has been reserved
[ 0.227182] system 00:07: [io 0x0c50-0x0c51] has been reserved
[ 0.227184] system 00:07: [io 0x0c52] has been reserved
[ 0.227185] system 00:07: [io 0x0c6c] has been reserved
[ 0.227186] system 00:07: [io 0x0c6f] has been reserved
[ 0.227188] system 00:07: [io 0x0cd0-0x0cd1] has been reserved
[ 0.227189] system 00:07: [io 0x0cd2-0x0cd3] has been reserved
[ 0.227191] system 00:07: [io 0x0cd4-0x0cd5] has been reserved
[ 0.227192] system 00:07: [io 0x0cd6-0x0cd7] has been reserved
[ 0.227194] system 00:07: [io 0x0cd8-0x0cdf] has been reserved
[ 0.227195] system 00:07: [io 0x0800-0x089f] could not be reserved
[ 0.227197] system 00:07: [io 0x0b20-0x0b3f] has been reserved
[ 0.227198] system 00:07: [io 0x0900-0x090f] has been reserved
[ 0.227201] system 00:07: [io 0x0910-0x091f] has been reserved
[ 0.227202] system 00:07: [io 0xfe00-0xfefe] has been reserved
[ 0.227204] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.227206] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.227208] system 00:07: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.227209] system 00:07: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.227211] system 00:07: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.227213] system 00:07: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.227214] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.227217] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.227314] system 00:08: [mem 0xb0000000-0xdfffffff] has been reserved
[ 0.227316] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.227388] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.227496] pnp: PnP ACPI: found 10 devices
[ 0.233874] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_id
le_ns: 2085701024 ns
[ 0.233903] pci 0000:00:14.4: PCI bridge to [bus 01]
[ 0.233915] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.233924] pci 0000:00:15.2: PCI bridge to [bus 03]
[ 0.233927] pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
[ 0.233931] pci 0000:00:15.2: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.233935] pci 0000:00:15.2: bridge window [mem 0xf0000000-0xf00fffff 64bi
t pref]
[ 0.233941] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.233943] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.233944] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.233946] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.233947] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.233948] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.233950] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xffffffff window]
[ 0.233952] pci_bus 0000:01: resource 4 [io 0x0000-0x03af window]
[ 0.233953] pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.233954] pci_bus 0000:01: resource 6 [io 0x03b0-0x03df window]
[ 0.233955] pci_bus 0000:01: resource 7 [io 0x0d00-0xffff window]
[ 0.233957] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.233958] pci_bus 0000:01: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.233960] pci_bus 0000:01: resource 10 [mem 0xe0000000-0xffffffff window]
[ 0.233961] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.233963] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.233964] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref
]
[ 0.233993] NET: Registered protocol family 2
[ 0.234157] TCP established hash table entries: 32768 (order: 6, 262144 bytes
)
[ 0.234244] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.234364] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.234411] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.234433] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.234509] NET: Registered protocol family 1
[ 0.234528] pci 0000:00:01.0: Video device with shadowed ROM
[ 0.483710] PCI: CLS 64 bytes, default 64
[ 0.483768] Trying to unpack rootfs image as initramfs...
[ 0.938214] Freeing initrd memory: 36948K (ffff8800337c6000 - ffff880035bdb00
0)
[ 0.938244] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.938247] software IO TLB [mem 0xa9389000-0xad389000] (64MB) mapped at [fff
f8800a9389000-ffff8800ad388fff]
[ 0.938307] perf: AMD NB counters detected
[ 0.938319] LVT offset 0 assigned for vector 0x400
[ 0.938330] perf: AMD IBS detected (0x000000ff)
[ 0.938417] Scanning for low memory corruption every 60 seconds
[ 0.938782] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.938817] audit: initializing netlink subsys (disabled)
[ 0.938836] audit: type=2000 audit(1476820530.832:1): initialized
[ 0.939116] Initialise system trusted keyring
[ 0.939215] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.939216] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.940679] zbud: loaded
[ 0.940833] VFS: Disk quotas dquot_6.6.0
[ 0.940863] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.941119] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.941366] fuse init (API version 7.23)
[ 0.941495] Key type big_key registered
[ 0.941515] Allocating IMA MOK and blacklist keyrings.
[ 0.941897] Key type asymmetric registered
[ 0.941899] Asymmetric key parser 'x509' registered
[ 0.941934] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
49)
[ 0.941966] io scheduler noop registered
[ 0.941968] io scheduler deadline registered (default)
[ 0.941997] io scheduler cfq registered
[ 0.942342] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.942350] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.942376] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.942378] vesafb: scrolling: redraw
[ 0.942379] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.942393] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000800000,
using 8128k, total 8128k
[ 0.942497] Console: switching to colour frame buffer device 240x67
[ 0.942521] fb0: VESA VGA frame buffer device
[ 0.942595] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:0
0/input/input0
[ 0.942599] ACPI: Power Button [PWRB]
[ 0.942632] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inp
ut1
[ 0.942634] ACPI: Power Button [PWRF]
[ 0.942664] ACPI: acpi_idle registered with cpuidle
[ 0.942846] GHES: HEST is not enabled!
[ 0.942930] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.963303] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 1655
0A
[ 0.964817] Linux agpgart interface v0.103
[ 0.967535] brd: module loaded
[ 0.968723] loop: module loaded
[ 0.968935] libphy: Fixed MDIO Bus: probed
[ 0.968938] tun: Universal TUN/TAP device driver, 1.6
[ 0.968939] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.968983] PPP generic driver version 2.4.2
[ 0.969042] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.969046] ehci-pci: EHCI PCI platform driver
[ 0.969167] QUIRK: Enable AMD PLL fix
[ 0.969190] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 0.969195] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus numbe
r 1
[ 0.969200] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI d
ummy qh workaround
[ 0.969209] ehci-pci 0000:00:12.2: debug port 1
[ 0.969242] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb48000
[ 0.979483] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.979538] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.979540] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 0.979541] usb usb1: Product: EHCI Host Controller
[ 0.979542] usb usb1: Manufacturer: Linux 4.4.0-43-generic ehci_hcd
[ 0.979543] usb usb1: SerialNumber: 0000:00:12.2
[ 0.979669] hub 1-0:1.0: USB hub found
[ 0.979674] hub 1-0:1.0: 5 ports detected
[ 0.979899] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.979905] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus numbe
r 2
[ 0.979908] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI d
ummy qh workaround
[ 0.979916] ehci-pci 0000:00:13.2: debug port 1
[ 0.979942] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb46000
[ 0.991482] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.991531] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.991533] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 0.991534] usb usb2: Product: EHCI Host Controller
[ 0.991535] usb usb2: Manufacturer: Linux 4.4.0-43-generic ehci_hcd
[ 0.991536] usb usb2: SerialNumber: 0000:00:13.2
[ 0.991666] hub 2-0:1.0: USB hub found
[ 0.991671] hub 2-0:1.0: 5 ports detected
[ 0.991895] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 0.991899] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus numbe
r 3
[ 0.991902] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI d
ummy qh workaround
[ 0.991911] ehci-pci 0000:00:16.2: debug port 1
[ 0.991937] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb44000
[ 1.003484] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.003546] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.003548] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 1.003550] usb usb3: Product: EHCI Host Controller
[ 1.003551] usb usb3: Manufacturer: Linux 4.4.0-43-generic ehci_hcd
[ 1.003552] usb usb3: SerialNumber: 0000:00:16.2
[ 1.003680] hub 3-0:1.0: USB hub found
[ 1.003685] hub 3-0:1.0: 4 ports detected
[ 1.003799] ehci-platform: EHCI generic platform driver
[ 1.003814] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.003817] ohci-pci: OHCI PCI platform driver
[ 1.003939] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.003944] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus numbe
r 4
[ 1.003972] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb49000
[ 1.063514] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.063517] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 1.063519] usb usb4: Product: OHCI PCI host controller
[ 1.063520] usb usb4: Manufacturer: Linux 4.4.0-43-generic ohci_hcd
[ 1.063521] usb usb4: SerialNumber: 0000:00:12.0
[ 1.063661] hub 4-0:1.0: USB hub found
[ 1.063667] hub 4-0:1.0: 5 ports detected
[ 1.063879] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.063884] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus numbe
r 5
[ 1.063902] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb47000
[ 1.123534] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.123537] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 1.123538] usb usb5: Product: OHCI PCI host controller
[ 1.123540] usb usb5: Manufacturer: Linux 4.4.0-43-generic ohci_hcd
[ 1.123541] usb usb5: SerialNumber: 0000:00:13.0
[ 1.123682] hub 5-0:1.0: USB hub found
[ 1.123689] hub 5-0:1.0: 5 ports detected
[ 1.123902] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.123907] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus numbe
r 6
[ 1.123926] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb45000
[ 1.183543] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.183546] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 1.183548] usb usb6: Product: OHCI PCI host controller
[ 1.183549] usb usb6: Manufacturer: Linux 4.4.0-43-generic ohci_hcd
[ 1.183550] usb usb6: SerialNumber: 0000:00:16.0
[ 1.183687] hub 6-0:1.0: USB hub found
[ 1.183693] hub 6-0:1.0: 4 ports detected
[ 1.183821] ohci-platform: OHCI generic platform driver
[ 1.183835] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.183893] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.184264] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.184267] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.184339] mousedev: PS/2 mouse device common for all mice
[ 1.184473] rtc_cmos 00:03: RTC can wake from S4
[ 1.184581] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.184600] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpe
t irqs
[ 1.184606] i2c /dev entries driver
[ 1.184658] device-mapper: uevent: version 1.0.3
[ 1.184727] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-d
evel@redhat.com
[ 1.184744] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.185048] NET: Registered protocol family 10
[ 1.185219] NET: Registered protocol family 17
[ 1.185230] Key type dns_resolver registered
[ 1.185435] microcode: CPU0: patch_level=0x06001119
[ 1.185440] microcode: CPU1: patch_level=0x06001119
[ 1.185475] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.
co.uk>, Peter Oruba
[ 1.185628] registered taskstats version 1
[ 1.185640] Loading compiled-in X.509 certificates
[ 1.186357] Loaded X.509 cert 'Build time autogenerated kernel key: d76179dc6
bbadd817ec29258d181eadabda602cb'
[ 1.186373] zswap: loaded using pool lzo/zbud
[ 1.188208] Key type trusted registered
[ 1.191475] Key type encrypted registered
[ 1.191484] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.191488] ima: No TPM chip found, activating TPM-bypass!
[ 1.191511] evm: HMAC attrs: 0x1
[ 1.191739] Magic number: 4:285:951
[ 1.191772] tty tty8: hash matches
[ 1.191791] memory memory4: hash matches
[ 1.191825] rtc_cmos 00:03: setting system clock to 2016-10-18 19:55:31 UTC (
1476820531)
[ 1.191950] acpi-cpufreq: overriding BIOS provided _PSD data
[ 1.192014] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.192015] EDD information not available.
[ 1.192080] PM: Hibernation image not present or could not be loaded.
[ 1.193276] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff8
20b4000)
[ 1.193279] Write protecting the kernel read-only data: 14336k
[ 1.194041] Freeing unused kernel memory: 1820K (ffff880001839000 - ffff88000
1a00000)
[ 1.194359] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001
e00000)
[ 1.204647] random: systemd-udevd: uninitialized urandom read (16 bytes read,
3 bits of entropy available)
[ 1.204747] random: systemd-udevd: uninitialized urandom read (16 bytes read,
3 bits of entropy available)
[ 1.204761] random: systemd-udevd: uninitialized urandom read (16 bytes read,
3 bits of entropy available)
[ 1.205389] random: udevadm: uninitialized urandom read (16 bytes read, 3 bit
s of entropy available)
[ 1.205437] random: udevadm: uninitialized urandom read (16 bytes read, 3 bit
s of entropy available)
[ 1.205568] random: udevadm: uninitialized urandom read (16 bytes read, 3 bit
s of entropy available)
[ 1.205613] random: udevadm: uninitialized urandom read (16 bytes read, 3 bit
s of entropy available)
[ 1.205657] random: udevadm: uninitialized urandom read (16 bytes read, 3 bit
s of entropy available)
[ 1.205702] random: udevadm: uninitialized urandom read (16 bytes read, 3 bit
s of entropy available)
[ 1.205752] random: udevadm: uninitialized urandom read (16 bytes read, 3 bit
s of entropy available)
[ 1.237505] ahci 0000:00:11.0: version 3.0
[ 1.238830] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f im
pl SATA mode
[ 1.238835] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
[ 1.239703] scsi host0: ahci
[ 1.239793] scsi host1: ahci
[ 1.239871] scsi host2: ahci
[ 1.243313] FUJITSU Extended Socket Network Device Driver - version 1.0 - Cop
yright (c) 2015 FUJITSU LIMITED
[ 1.244545] [drm] Initialized drm 1.1.0 20060810
[ 1.246100] wmi: Mapper loaded
[ 1.249923] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.249970] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial br
ightness
[ 1.250018] ACPI Error: [AFN7] Namespace lookup failure, AE_NOT_FOUND (201509
30/psargs-359)
[ 1.250023] ACPI Error: Method parse/execution failed [\_SB.PCI0.VGA.LCD._BCM
] (Node ffff88011acab730), AE_NOT_FOUND (20150930/psparse-542)
[ 1.250029] ACPI Error: Evaluating _BCM failed (20150930/video-367)
[ 1.250089] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/L
NXVIDEO:00/input/input4
[ 1.250170] scsi host3: ahci
[ 1.256427] scsi host4: ahci
[ 1.261455] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.263301] scsi host5: ahci
[ 1.263649] ata1: SATA max UDMA/133 abar m2048@0xfeb4a000 port 0xfeb4a100 irq
24
[ 1.263659] ata2: SATA max UDMA/133 abar m2048@0xfeb4a000 port 0xfeb4a180 irq
24
[ 1.263665] ata3: SATA max UDMA/133 abar m2048@0xfeb4a000 port 0xfeb4a200 irq
24
[ 1.263669] ata4: SATA max UDMA/133 abar m2048@0xfeb4a000 port 0xfeb4a280 irq
24
[ 1.263673] ata5: SATA max UDMA/133 abar m2048@0xfeb4a000 port 0xfeb4a300 irq
24
[ 1.263678] ata6: SATA max UDMA/133 abar m2048@0xfeb4a000 port 0xfeb4a380 irq
24
[ 1.278812] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90000648000, e0
:3f:49:12:f6:85, XID 0c000800 IRQ 25
[ 1.278816] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx c
hecksumming: ko]
[ 1.285178] [drm] radeon kernel modesetting enabled.
[ 1.287392] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.287395] AMD IOMMUv2 functionality not available on this system
[ 1.290192] CRAT table not found
[ 1.290195] Finished initializing topology ret=0
[ 1.290241] kfd kfd: Initialized module
[ 1.290439] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[ 1.290441] fb: switching to radeondrmfb from VESA VGA
[ 1.290475] Console: switching to colour dummy device 80x25
[ 1.290832] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9996 0x1043
:0x8526).
[ 1.290844] [drm] register mmio base: 0xFEB00000
[ 1.290845] [drm] register mmio size: 262144
[ 1.290890] ATOM BIOS: 113
[ 1.290977] radeon 0000:00:01.0: VRAM: 768M 0x0000000000000000 - 0x000000002F
FFFFFF (768M used)
[ 1.290979] radeon 0000:00:01.0: GTT: 1024M 0x0000000030000000 - 0x000000006F
FFFFFF
[ 1.290981] [drm] Detected VRAM RAM=768M, BAR=256M
[ 1.290982] [drm] RAM width 32bits DDR
[ 1.291037] [TTM] Zone kernel: Available graphics memory: 1607374 kiB
[ 1.291039] [TTM] Initializing pool allocator
[ 1.291043] [TTM] Initializing DMA pool allocator
[ 1.291062] [drm] radeon: 768M of VRAM memory ready
[ 1.291064] [drm] radeon: 1024M of GTT memory ready.
[ 1.291075] [drm] Loading ARUBA Microcode
[ 1.291132] [drm] Internal thermal controller without fan control
[ 1.291395] [drm] radeon: dpm initialized
[ 1.291432] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.292700] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[ 1.292739] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 1.314139] [drm] PCIE GART of 1024M enabled (table at 0x00000000002E8000).
[ 1.314388] radeon 0000:00:01.0: WB enabled
[ 1.314392] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x000000
0030000c00 and cpu addr 0xffff880034ceac00
[ 1.315123] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x000000
0000075a18 and cpu addr 0xffffc90001435a18
[ 1.315420] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.317779] r8169 0000:03:00.0 eth1: renamed from eth0
[ 1.335153] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x000000
0030000c18 and cpu addr 0xffff880034ceac18
[ 1.335157] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x000000
0030000c1c and cpu addr 0xffff880034ceac1c
[ 1.335159] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x000000
0030000c04 and cpu addr 0xffff880034ceac04
[ 1.335161] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x000000
0030000c08 and cpu addr 0xffff880034ceac08
[ 1.335163] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x000000
0030000c0c and cpu addr 0xffff880034ceac0c
[ 1.335164] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x000000
0030000c10 and cpu addr 0xffff880034ceac10
[ 1.335176] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.335178] [drm] Driver supports precise vblank timestamp query.
[ 1.335181] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 1.335218] radeon 0000:00:01.0: radeon: using MSI.
[ 1.335498] [drm] radeon: irq initialized.
[ 1.354556] [drm] ring test on 0 succeeded in 2 usecs
[ 1.354566] [drm] ring test on 3 succeeded in 3 usecs
[ 1.354573] [drm] ring test on 4 succeeded in 3 usecs
[ 1.400276] [drm] ring test on 5 succeeded in 1 usecs
[ 1.420144] [drm] UVD initialized successfully.
[ 1.436836] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 1.436839] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.436841] usb 1-1: Product: USB2.0 Hub
[ 1.437248] hub 1-1:1.0: USB hub found
[ 1.437585] hub 1-1:1.0: 4 ports detected
[ 1.529362] [drm] ring test on 6 succeeded in 17 usecs
[ 1.529373] [drm] ring test on 7 succeeded in 3 usecs
[ 1.529374] [drm] VCE initialized successfully.
[ 1.530261] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.530795] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.531325] [drm] ib test on ring 4 succeeded in 0 usecs
[ 1.551724] [drm] ib test on ring 5 succeeded
[ 1.555896] usb 3-1: New USB device found, idVendor=0d8c, idProduct=0004
[ 1.555899] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.555901] usb 3-1: Product: USB2.0 High-Speed True HD Audio
[ 1.555903] usb 3-1: Manufacturer: C-MEDIA Inc.
[ 1.560889] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.564913] usbcore: registered new interface driver usbhid
[ 1.564916] usbhid: USB HID core driver
[ 1.567082] input: C-MEDIA Inc. USB2.0 High-Speed True HD Audio as /devices/p
ci0000:00/0000:00:16.2/usb3/3-1/3-1:1.2/0003:0D8C:0004.0001/input/input6
[ 1.583574] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.599567] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.603562] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.603597] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.619695] hid-generic 0003:0D8C:0004.0001: input,hidraw0: USB HID v1.00 Dev
ice [C-MEDIA Inc. USB2.0 High-Speed True HD Audio] on usb-0000:00:16.2-1/input2
[ 1.707553] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[ 1.755565] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.756422] ata2.00: ATA-9: ST2000DM001-1CH164, CC27, max UDMA/133
[ 1.756425] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), A
A
[ 1.757162] ata2.00: configured for UDMA/133
[ 1.757316] scsi 1:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC27 PQ
: 0 ANSI: 5
[ 1.757551] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.
82 TiB)
[ 1.757554] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 1.757594] sd 1:0:0:0: [sda] Write Protect is off
[ 1.757596] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.757614] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, does
n't support DPO or FUA
[ 1.757676] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.766341] sda: sda1 < sda5 >
[ 1.766641] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.767568] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.769000] ata3.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[ 1.769006] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.779020] ata3.00: configured for UDMA/133
[ 1.779176] scsi 2:0:0:0: Direct-Access ATA INTEL SSDSC2CW12 400i PQ
: 0 ANSI: 5
[ 1.779395] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.779490] sd 2:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112
GiB)
[ 1.779545] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.779548] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.779565] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, does
n't support DPO or FUA
[ 1.780291] sdb: sdb1 < sdb5 sdb6 >
[ 1.780581] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.805193] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c517
[ 1.805197] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber
=0
[ 1.805199] usb 1-1.2: Product: USB Receiver
[ 1.805200] usb 1-1.2: Manufacturer: Logitech
[ 1.816424] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/
usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C517.0002/input/input7
[ 1.871711] logitech 0003:046D:C517.0002: input,hidraw1: USB HID v1.10 Keyboa
rd [Logitech USB Receiver] on usb-0000:00:12.2-1.2/input0
[ 1.871731] logitech 0003:046D:C517.0003: fixing up Logitech keyboard report
descriptor
[ 1.872375] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/
usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C517.0003/input/input8
[ 1.883565] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[ 1.927786] logitech 0003:046D:C517.0003: input,hiddev0,hidraw2: USB HID v1.1
0 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-1.2/input1
[ 1.935557] tsc: Refined TSC clocksource calibration: 3890.257 MHz
[ 1.935569] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x7026cd4c
b37, max_idle_ns: 881590669116 ns
[ 1.978410] usb 1-1.3: New USB device found, idVendor=062a, idProduct=4101
[ 1.978421] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber
=0
[ 1.978423] usb 1-1.3: Product: 2.4G Keyboard Mouse
[ 1.978424] usb 1-1.3: Manufacturer: MOSART Semi.
[ 1.979889] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/00
00:00:12.2/usb1/1-1/1-1.3/1-1.3:1.0/0003:062A:4101.0004/input/input9
[ 2.035711] hid-generic 0003:062A:4101.0004: input,hidraw3: USB HID v1.10 Key
board [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:12.2-1.3/input0
[ 2.038107] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/00
00:00:12.2/usb1/1-1/1-1.3/1-1.3:1.1/0003:062A:4101.0005/input/input10
[ 2.071839] [drm] ib test on ring 6 succeeded
[ 2.072371] [drm] ib test on ring 7 succeeded
[ 2.073461] [drm] Radeon Display Connectors
[ 2.073463] [drm] Connector 0:
[ 2.073464] [drm] VGA-1
[ 2.073465] [drm] HPD2
[ 2.073467] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x6
54c
[ 2.073468] [drm] Encoders:
[ 2.073469] [drm] CRT1: INTERNAL_UNIPHY2
[ 2.073470] [drm] CRT1: NUTMEG
[ 2.073471] [drm] Connector 1:
[ 2.073472] [drm] DVI-D-1
[ 2.073473] [drm] HPD3
[ 2.073475] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x6
55c
[ 2.073475] [drm] Encoders:
[ 2.073476] [drm] DFP1: INTERNAL_UNIPHY
[ 2.091764] hid-generic 0003:062A:4101.0005: input,hiddev0,hidraw4: USB HID v
1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:12.2-1.3/input1
[ 2.258329] [drm] fb mappable at 0xE04EC000
[ 2.258332] [drm] vram apper at 0xE0000000
[ 2.258333] [drm] size 8294400
[ 2.258334] [drm] fb depth is 24
[ 2.258335] [drm] pitch is 7680
[ 2.258424] fbcon: radeondrmfb (fb0) is primary device
[ 2.258500] Console: switching to colour frame buffer device 240x67
[ 2.258535] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 2.267781] [drm] Initialized radeon 2.43.0 20080528 for 0000:00:01.0 on mino
r 0
[ 2.302907] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts:
(null)
[ 2.402614] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SEL
INUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +
XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 2.402723] systemd[1]: Detected architecture x86-64.
[ 2.402985] systemd[1]: Set hostname to <lubuntu>.
[ 2.507335] systemd[1]: Listening on udev Control Socket.
[ 2.507536] systemd[1]: Created slice System Slice.
[ 2.507570] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.507625] systemd[1]: Created slice User and Session Slice.
[ 2.507638] systemd[1]: Reached target Remote File Systems (Pre).
[ 2.507672] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.507699] systemd[1]: Listening on udev Kernel Socket.
[ 2.507713] systemd[1]: Reached target User and Group Name Lookups.
[ 2.507731] systemd[1]: Reached target Encrypted Volumes.
[ 2.507850] systemd[1]: Set up automount Arbitrary Executable File Formats Fi
le System Automount Point.
[ 2.507883] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.507897] systemd[1]: Reached target Remote File Systems.
[ 2.507977] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.508018] systemd[1]: Started Forward Password Requests to Wall Directory W
atch.
[ 2.508056] systemd[1]: Listening on Journal Socket.
[ 2.523690] systemd[1]: Mounting Huge Pages File System...
[ 2.524516] systemd[1]: Starting Create list of required static device nodes
for the current kernel...
[ 2.525304] systemd[1]: Starting Uncomplicated firewall...
[ 2.531722] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.532587] systemd[1]: Starting Set console keymap...
[ 2.533433] systemd[1]: Started Braille Device Support.
[ 2.537083] systemd[1]: Started Read required files in advance.
[ 2.541966] systemd[1]: Starting Load Kernel Modules...
[ 2.542725] systemd[1]: Mounting Debug File System...
[ 2.542906] systemd[1]: Listening on Journal Audit Socket.
[ 2.542940] systemd[1]: Reached target Slices.
[ 2.542989] systemd[1]: Listening on Syslog Socket.
[ 2.545533] systemd[1]: Starting Journal Service...
[ 2.548755] systemd[1]: Mounted Huge Pages File System.
[ 2.548806] systemd[1]: Mounted Debug File System.
[ 2.548822] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.549160] systemd[1]: Started Create list of required static device nodes f
or the current kernel.
[ 2.549412] systemd[1]: Started Uncomplicated firewall.
[ 2.568996] lp: driver loaded but no devices found
[ 2.582246] ppdev: user-space parallel port driver
[ 2.585036] parport_pc 00:02: reported by Plug and Play ACPI
[ 2.585103] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 2.639819] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 2.640492] systemd[1]: Started Set console keymap.
[ 2.640685] systemd[1]: Started Journal Service.
[ 2.679743] lp0: using parport0 (interrupt-driven).
[ 2.900997] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
[ 2.926545] systemd-journald[236]: Received request to flush runtime journal
from PID 1
[ 2.945910] clocksource: Switched to clocksource tsc
[ 3.141206] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.146447] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revisio
n 0
[ 3.155099] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb2
0
[ 3.644512] AVX version of gcm_enc/dec engaged.
[ 3.644516] AES CTR mode by8 optimization enabled
[ 3.721275] kvm: Nested Virtualization enabled
[ 3.721281] kvm: Nested Paging enabled
[ 3.751828] Adding 8723452k swap on /dev/sdb6. Priority:-1 extents:1 across:
8723452k SSFS
[ 3.765508] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line
_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 3.765517] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0
/0x0/0x0)
[ 3.765519] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0
/0x0)
[ 3.765521] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 3.765523] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
[ 3.765524] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 3.765527] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 3.765530] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 3.765533] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 3.780963] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:
14.2/sound/card0/input11
[ 3.781036] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:1
4.2/sound/card0/input12
[ 3.781101] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/
sound/card0/input13
[ 3.781168] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:1
4.2/sound/card0/input14
[ 3.781239] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/00
00:00:14.2/sound/card0/input15
[ 3.796106] random: nonblocking pool is initialized
[ 3.807840] asus_wmi: ASUS WMI generic driver loaded
[ 3.809368] asus_wmi: Initialization: 0x0
[ 3.809394] asus_wmi: BIOS WMI version: 0.9
[ 3.809435] asus_wmi: SFUN value: 0x0
[ 3.809758] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/in
put16
[ 3.810280] asus_wmi: Number of fans: 1
[ 3.894495] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts:
(null)
[ 4.065216] audit: type=1400 audit(1476820534.370:2): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="/sbin/dhclient" pid=658 comm="app
armor_parser"
[ 4.065225] audit: type=1400 audit(1476820534.370:3): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-c
lient.action" pid=658 comm="apparmor_parser"
[ 4.065230] audit: type=1400 audit(1476820534.370:4): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-h
elper" pid=658 comm="apparmor_parser"
[ 4.065235] audit: type=1400 audit(1476820534.370:5): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient
-script" pid=658 comm="apparmor_parser"
[ 4.076976] audit: type=1400 audit(1476820534.382:6): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-se
ssion" pid=657 comm="apparmor_parser"
[ 4.076987] audit: type=1400 audit(1476820534.382:7): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-se
ssion//chromium" pid=657 comm="apparmor_parser"
[ 4.078221] audit: type=1400 audit(1476820534.382:8): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="/usr/bin/evince" pid=659 comm="ap
parmor_parser"
[ 4.078230] audit: type=1400 audit(1476820534.382:9): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper
" pid=659 comm="apparmor_parser"
[ 4.078235] audit: type=1400 audit(1476820534.382:10): apparmor="STATUS" oper
ation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=6
59 comm="apparmor_parser"
[ 4.305717] cgroup: new mount options do not match the existing superblock, w
ill be ignored
[ 4.549890] usbcore: registered new interface driver snd-usb-audio
[ 4.772343] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 4.833196] r8169 0000:03:00.0 eth1: link down
[ 4.833216] r8169 0000:03:00.0 eth1: link down
[ 4.833314] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 7.284697] r8169 0000:03:00.0 eth1: link up
[ 7.284709] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 1398.529961] usb 1-1.1: new high-speed USB device number 6 using ehci-pci
[ 1398.629028] usb 1-1.1: New USB device found, idVendor=05ac, idProduct=1209
[ 1398.629035] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber
=3
[ 1398.629039] usb 1-1.1: Product: Rockbox media player
[ 1398.629042] usb 1-1.1: Manufacturer: Rockbox.org
[ 1398.629045] usb 1-1.1: SerialNumber: 300000000000A270015AFD77B
[ 1398.640218] input: Rockbox.org Rockbox media player as /devices/pci0000:00/00
00:00:12.2/usb1/1-1/1-1.1/1-1.1:1.1/0003:05AC:1209.0006/input/input17
[ 1398.694768] hid-generic 0003:05AC:1209.0006: input,hidraw5: USB HID v1.10 Key
board [Rockbox.org Rockbox media player] on usb-0000:00:12.2-1.1/input1
[ 1399.100378] usb 1-1.1: USB disconnect, device number 6
[ 1399.232689] usbcore: registered new interface driver usb-storage
[ 1399.240975] usbcore: registered new interface driver uas
[ 1464.975979] usb 3-2: new high-speed USB device number 3 using ehci-pci
[ 1465.136038] usb 3-2: New USB device found, idVendor=05ac, idProduct=1209
[ 1465.136044] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1465.136048] usb 3-2: Product: Rockbox media player
[ 1465.136051] usb 3-2: Manufacturer: Rockbox.org
[ 1465.136054] usb 3-2: SerialNumber: 300000000000A270015AFD77B
[ 1467.784635] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 1467.784888] scsi host6: usb-storage 3-2:1.0
[ 1467.789671] input: Rockbox.org Rockbox media player as /devices/pci0000:00/00
00:00:16.2/usb3/3-2/3-2:1.1/0003:05AC:1209.0007/input/input18
[ 1467.844846] hid-generic 0003:05AC:1209.0007: input,hidraw5: USB HID v1.10 Key
board [Rockbox.org Rockbox media player] on usb-0000:00:16.2-2/input1
[ 1468.015651] usb 3-2: USB disconnect, device number 3
[ 1468.328080] usb 3-2: new high-speed USB device number 4 using ehci-pci
[ 1468.468071] usb 3-2: New USB device found, idVendor=05ac, idProduct=1209
[ 1468.468077] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1468.468081] usb 3-2: Product: Rockbox media player
[ 1468.468084] usb 3-2: Manufacturer: Rockbox.org
[ 1468.468087] usb 3-2: SerialNumber: 300000000000A270015AFD77B
[ 1468.522806] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 1468.522942] scsi host7: usb-storage 3-2:1.0
[ 1468.535559] input: Rockbox.org Rockbox media player as /devices/pci0000:00/00
00:00:16.2/usb3/3-2/3-2:1.1/0003:05AC:1209.0008/input/input19
[ 1468.588729] hid-generic 0003:05AC:1209.0008: input,hidraw5: USB HID v1.10 Key
board [Rockbox.org Rockbox media player] on usb-0000:00:16.2-2/input1
[ 1469.523251] scsi 7:0:0:0: Direct-Access TOSHIBA MK1214GAH BW00 PQ
: 0 ANSI: 4
[ 1469.526174] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 1469.534616] sd 7:0:0:0: [sdc] 58610412 2048-byte logical blocks: (120 GB/112
GiB)
[ 1469.536619] sd 7:0:0:0: [sdc] Write Protect is off
[ 1469.536624] sd 7:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[ 1469.538983] sd 7:0:0:0: [sdc] No Caching mode page found
[ 1469.538996] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 1469.560255] sdc: sdc1 sdc2
[ 1469.573862] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 1470.446642] FAT-fs (sdc2): Volume was not properly unmounted. Some data may b
e corrupt. Please run fsck.
[ 1509.193386] usb 3-2: USB disconnect, device number 4
[ 1509.193660] sd 7:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverb
yte=DRIVER_OK
[ 1509.193666] sd 7:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 01 6a e0 00 00 01
00
[ 1509.193670] blk_update_request: I/O error, dev sdc, sector 371584
[ 1509.197256] sd 7:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT dr
iverbyte=DRIVER_OK
[ 1509.197265] sd 7:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 01 6a e1 00 00 01
00
[ 1509.197269] blk_update_request: I/O error, dev sdc, sector 371588
[ 1509.197315] FAT-fs (sdc2): Directory bread(block 28636) failed
[ 1509.197335] FAT-fs (sdc2): Directory bread(block 28637) failed
[ 1509.197342] FAT-fs (sdc2): Directory bread(block 28638) failed
[ 1509.197350] FAT-fs (sdc2): Directory bread(block 28639) failed
[ 1509.197356] FAT-fs (sdc2): Directory bread(block 28640) failed
[ 1509.197362] FAT-fs (sdc2): Directory bread(block 28641) failed
[ 1509.197366] FAT-fs (sdc2): Directory bread(block 28642) failed
[ 1509.197371] FAT-fs (sdc2): Directory bread(block 28643) failed
[ 1509.201057] FAT-fs (sdc2): Directory bread(block 28636) failed
[ 1509.201069] FAT-fs (sdc2): Directory bread(block 28637) failed
[ 1509.206059] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206077] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206081] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8391)
[ 1509.206089] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206092] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8392)
[ 1509.206098] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206101] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8393)
[ 1509.206106] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206109] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8394)
[ 1509.206114] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206118] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8395)
[ 1509.206123] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206126] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8396)
[ 1509.206132] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206135] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8397)
[ 1509.206140] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206144] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8398)
[ 1509.206149] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206152] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8399)
[ 1509.206157] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206166] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206169] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8401)
[ 1509.206173] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206177] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8402)
[ 1509.206182] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206185] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8403)
[ 1509.206191] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206194] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8404)
[ 1509.206199] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206202] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8405)
[ 1509.206207] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206210] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8406)
[ 1509.206215] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206218] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8407)
[ 1509.206224] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206227] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8408)
[ 1509.206232] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206235] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8409)
[ 1509.206240] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206243] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8410)
[ 1509.206248] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206252] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8411)
[ 1509.206257] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206260] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8412)
[ 1509.206265] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206269] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8413)
[ 1509.206275] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206278] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8414)
[ 1509.206283] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206286] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8415)
[ 1509.206291] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206294] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8416)
[ 1509.206300] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206303] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8417)
[ 1509.206308] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206311] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8418)
[ 1509.206317] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206320] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8419)
[ 1509.206326] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206329] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8420)
[ 1509.206335] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206338] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8421)
[ 1509.206343] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206347] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8422)
[ 1509.206352] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206356] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8423)
[ 1509.206361] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206364] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8424)
[ 1509.206371] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206374] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8425)
[ 1509.206379] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206382] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8426)
[ 1509.206387] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206391] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8427)
[ 1509.206396] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206400] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8428)
[ 1509.206405] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206408] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8429)
[ 1509.206414] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206417] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8430)
[ 1509.206423] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206426] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8431)
[ 1509.206432] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206435] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8432)
[ 1509.206440] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206443] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8433)
[ 1509.206448] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206455] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8434)
[ 1509.206466] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206469] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8435)
[ 1509.206474] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206477] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8436)
[ 1509.206482] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206485] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8437)
[ 1509.206491] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206494] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8438)
[ 1509.206500] FAT-fs (sdc2): FAT read failed (blocknr 32)
[ 1509.206503] FAT-fs (sdc2): unable to read inode block for updating (i_pos 183
8439)
[ 1509.211133] FAT-fs (sdc2): FAT read failed (blocknr 46)
[ 1509.377212] FAT-fs (sdc2): bread failed in fat_clusters_flush
[ 1509.377273] VFS: Dirty inode writeback failed for block device sdc2 (err=-5).
[ 1509.565229] usb 3-2: new high-speed USB device number 5 using ehci-pci
[ 1509.926719] usb 3-2: New USB device found, idVendor=05ac, idProduct=1209
[ 1509.926725] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1509.926728] usb 3-2: Product: Rockbox media player
[ 1509.926730] usb 3-2: Manufacturer: Rockbox.org
[ 1509.926731] usb 3-2: SerialNumber: 300000000000A270015AFD77B
[ 1509.937445] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 1509.937626] scsi host8: usb-storage 3-2:1.0
[ 1509.942655] input: Rockbox.org Rockbox media player as /devices/pci0000:00/00
00:00:16.2/usb3/3-2/3-2:1.1/0003:05AC:1209.0009/input/input20
[ 1509.998629] hid-generic 0003:05AC:1209.0009: input,hidraw5: USB HID v1.10 Key
board [Rockbox.org Rockbox media player] on usb-0000:00:16.2-2/input1
[ 1510.940382] scsi 8:0:0:0: Direct-Access TOSHIBA MK1214GAH BW00 PQ
: 0 ANSI: 4
[ 1510.943203] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 1510.951504] sd 8:0:0:0: [sdc] 58610412 2048-byte logical blocks: (120 GB/112
GiB)
[ 1510.953749] sd 8:0:0:0: [sdc] Write Protect is off
[ 1510.953756] sd 8:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[ 1510.956112] sd 8:0:0:0: [sdc] No Caching mode page found
[ 1510.956117] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 1510.968385] sdc: sdc1 sdc2
[ 1510.980752] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 1513.544448] FAT-fs (sdc2): Volume was not properly unmounted. Some data may b
e corrupt. Please run fsck.
[ 1669.128042] usb 3-2: USB disconnect, device number 5
[ 1669.518084] usb 3-2: new high-speed USB device number 6 using ehci-pci
[ 1669.658230] usb 3-2: New USB device found, idVendor=05ac, idProduct=1209
[ 1669.658236] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1669.658238] usb 3-2: Product: Rockbox media player
[ 1669.658240] usb 3-2: Manufacturer: Rockbox.org
[ 1669.658242] usb 3-2: SerialNumber: 300000000000A270015AFD77B
[ 1672.409541] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 1672.409844] scsi host9: usb-storage 3-2:1.0
[ 1672.414182] input: Rockbox.org Rockbox media player as /devices/pci0000:00/00
00:00:16.2/usb3/3-2/3-2:1.1/0003:05AC:1209.000A/input/input21
[ 1672.471076] hid-generic 0003:05AC:1209.000A: input,hidraw5: USB HID v1.10 Key
board [Rockbox.org Rockbox media player] on usb-0000:00:16.2-2/input1
[ 1673.409732] scsi 9:0:0:0: Direct-Access TOSHIBA MK1214GAH BW00 PQ
: 0 ANSI: 4
[ 1673.410810] sd 9:0:0:0: Attached scsi generic sg2 type 0
[ 1673.420856] sd 9:0:0:0: [sdc] 58610412 2048-byte logical blocks: (120 GB/112
GiB)
[ 1673.423297] sd 9:0:0:0: [sdc] Write Protect is off
[ 1673.423303] sd 9:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[ 1673.425460] sd 9:0:0:0: [sdc] No Caching mode page found
[ 1673.425466] sd 9:0:0:0: [sdc] Assuming drive cache: write through
[ 1673.437853] sdc: sdc1 sdc2
[ 1673.450093] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[ 1674.335269] FAT-fs (sdc2): Volume was not properly unmounted. Some data may b
e corrupt. Please run fsck.
[ 1791.108415] usb 3-2: USB disconnect, device number 6
[ 1791.114184] sd 9:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT dr
iverbyte=DRIVER_OK
[ 1791.114193] sd 9:0:0:0: [sdc] tag#0 CDB: Write(10) 2a 00 00 00 fb 92 00 00 01
00
[ 1791.114196] blk_update_request: I/O error, dev sdc, sector 257608
[ 1791.114200] Buffer I/O error on dev sdc2, logical block 142, lost async page
write
[ 1791.114370] sd 9:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT dr
iverbyte=DRIVER_OK
[ 1791.114373] sd 9:0:0:0: [sdc] tag#0 CDB: Write(10) 2a 00 00 00 fb 94 00 00 02
00
[ 1791.114375] blk_update_request: I/O error, dev sdc, sector 257616
[ 1791.114377] Buffer I/O error on dev sdc2, logical block 144, lost async page
write
[ 1791.114379] Buffer I/O error on dev sdc2, logical block 145, lost async page
write
[ 1791.449823] usb 3-2: new high-speed USB device number 7 using ehci-pci
[ 1792.966487] FAT-fs (sdc2): Directory bread(block 28612) failed
[ 1792.966493] FAT-fs (sdc2): Directory bread(block 28613) failed
[ 1792.966495] FAT-fs (sdc2): Directory bread(block 28614) failed
[ 1792.966497] FAT-fs (sdc2): Directory bread(block 28615) failed
[ 1792.966499] FAT-fs (sdc2): Directory bread(block 28616) failed
[ 1792.966501] FAT-fs (sdc2): Directory bread(block 28617) failed
[ 1792.966503] FAT-fs (sdc2): Directory bread(block 28618) failed
[ 1792.966505] FAT-fs (sdc2): Directory bread(block 28619) failed
[ 1792.966918] FAT-fs (sdc2): Directory bread(block 28612) failed
[ 1792.966922] FAT-fs (sdc2): Directory bread(block 28613) failed
[ 1793.937715] usb 3-2: New USB device found, idVendor=05ac, idProduct=1209
[ 1793.937721] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1793.937725] usb 3-2: Product: Rockbox media player
[ 1793.937728] usb 3-2: Manufacturer: Rockbox.org
[ 1793.937730] usb 3-2: SerialNumber: 300000000000A270015AFD77B
[ 1793.946576] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 1793.946754] scsi host10: usb-storage 3-2:1.0
[ 1793.951406] input: Rockbox.org Rockbox media player as /devices/pci0000:00/00
00:00:16.2/usb3/3-2/3-2:1.1/0003:05AC:1209.000B/input/input22
[ 1794.006787] hid-generic 0003:05AC:1209.000B: input,hidraw5: USB HID v1.10 Key
board [Rockbox.org Rockbox media player] on usb-0000:00:16.2-2/input1
[ 1794.949030] scsi 10:0:0:0: Direct-Access TOSHIBA MK1214GAH BW00 P
Q: 0 ANSI: 4
[ 1794.949602] sd 10:0:0:0: Attached scsi generic sg2 type 0
[ 1794.959009] sd 10:0:0:0: [sdc] 58610412 2048-byte logical blocks: (120 GB/112
GiB)
[ 1794.961275] sd 10:0:0:0: [sdc] Write Protect is off
[ 1794.961282] sd 10:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[ 1794.963635] sd 10:0:0:0: [sdc] No Caching mode page found
[ 1794.963648] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 1794.977147] sdc: sdc1 sdc2
[ 1794.989391] sd 10:0:0:0: [sdc] Attached SCSI removable disk
[ 1796.927690] FAT-fs (sdc2): Volume was not properly unmounted. Some data may b
e corrupt. Please run fsck.
[ 1822.385714] usb 3-2: USB disconnect, device number 7
[ 1822.742893] usb 3-2: new high-speed USB device number 8 using ehci-pci
[ 1822.882122] usb 3-2: New USB device found, idVendor=05ac, idProduct=1209
[ 1822.882127] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1822.882130] usb 3-2: Product: Rockbox media player
[ 1822.882133] usb 3-2: Manufacturer: Rockbox.org
[ 1822.882135] usb 3-2: SerialNumber: 300000000000A270015AFD77B
[ 1825.667647] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 1825.667958] scsi host11: usb-storage 3-2:1.0
[ 1825.672953] input: Rockbox.org Rockbox media player as /devices/pci0000:00/00
00:00:16.2/usb3/3-2/3-2:1.1/0003:05AC:1209.000C/input/input23
[ 1825.727720] hid-generic 0003:05AC:1209.000C: input,hidraw5: USB HID v1.10 Key
board [Rockbox.org Rockbox media player] on usb-0000:00:16.2-2/input1
[ 1826.669653] scsi 11:0:0:0: Direct-Access TOSHIBA MK1214GAH BW00 P
Q: 0 ANSI: 4
[ 1826.670236] sd 11:0:0:0: Attached scsi generic sg2 type 0
[ 1826.679645] sd 11:0:0:0: [sdc] 58610412 2048-byte logical blocks: (120 GB/112
GiB)
[ 1826.681902] sd 11:0:0:0: [sdc] Write Protect is off
[ 1826.681907] sd 11:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[ 1826.684245] sd 11:0:0:0: [sdc] No Caching mode page found
[ 1826.684250] sd 11:0:0:0: [sdc] Assuming drive cache: write through
[ 1826.696651] sdc: sdc1 sdc2
[ 1826.711137] sd 11:0:0:0: [sdc] Attached SCSI removable disk
[ 1827.570572] FAT-fs (sdc2): Volume was not properly unmounted. Some data may b
e corrupt. Please run fsck.
[ 1853.344310] usb 3-2: USB disconnect, device number 8
[ 1853.671732] usb 3-2: new high-speed USB device number 9 using ehci-pci
[ 1854.207792] usb 3-2: device not accepting address 9, error -71
[ 1854.591769] usb 6-2: new full-speed USB device number 2 using ohci-pci
[ 1854.751917] usb 6-2: not running at top speed; connect to a high speed hub
[ 1854.764856] usb 6-2: New USB device found, idVendor=05ac, idProduct=1209
[ 1854.764863] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1854.764867] usb 6-2: Product: Rockbox media player
[ 1854.764870] usb 6-2: Manufacturer: Rockbox.org
[ 1854.764872] usb 6-2: SerialNumber: 300000000000A270015AFD77B
[ 1855.903877] usb 1-1.2: reset low-speed USB device number 3 using ehci-pci
[ 1857.511163] usb-storage 6-2:1.0: USB Mass Storage device detected
[ 1857.511463] scsi host12: usb-storage 6-2:1.0
[ 1857.519055] input: Rockbox.org Rockbox media player as /devices/pci0000:00/00
00:00:16.0/usb6/6-2/6-2:1.1/0003:05AC:1209.000D/input/input24
[ 1857.572676] hid-generic 0003:05AC:1209.000D: input,hidraw5: USB HID v1.10 Key
board [Rockbox.org Rockbox media player] on usb-0000:00:16.0-2/input1
[ 1858.515115] scsi 12:0:0:0: Direct-Access TOSHIBA MK1214GAH BW00 P
Q: 0 ANSI: 4
[ 1858.515583] sd 12:0:0:0: Attached scsi generic sg2 type 0
[ 1858.527100] sd 12:0:0:0: [sdc] 58610412 2048-byte logical blocks: (120 GB/112
GiB)
[ 1858.533097] sd 12:0:0:0: [sdc] Write Protect is off
[ 1858.533104] sd 12:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[ 1858.539097] sd 12:0:0:0: [sdc] No Caching mode page found
[ 1858.539104] sd 12:0:0:0: [sdc] Assuming drive cache: write through
[ 1858.579122] sdc: sdc1 sdc2
[ 1858.619105] sd 12:0:0:0: [sdc] Attached SCSI removable disk
[ 1862.834620] usb 6-2: USB disconnect, device number 2
[ 1909.745478] usb 3-2: new high-speed USB device number 11 using ehci-pci
[ 1909.885361] usb 3-2: New USB device found, idVendor=05ac, idProduct=1209
[ 1909.885367] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1909.885371] usb 3-2: Product: Rockbox media player
[ 1909.885374] usb 3-2: Manufacturer: Rockbox.org
[ 1909.885377] usb 3-2: SerialNumber: 300000000000A270015AFD77B
[ 1912.535683] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 1912.535930] scsi host13: usb-storage 3-2:1.0
[ 1912.541220] input: Rockbox.org Rockbox media player as /devices/pci0000:00/00
00:00:16.2/usb3/3-2/3-2:1.1/0003:05AC:1209.000E/input/input25
[ 1912.594488] hid-generic 0003:05AC:1209.000E: input,hidraw5: USB HID v1.10 Key
board [Rockbox.org Rockbox media player] on usb-0000:00:16.2-2/input1
[ 1912.753200] usb 3-2: USB disconnect, device number 11
[ 1913.057581] usb 3-2: new high-speed USB device number 12 using ehci-pci
[ 1913.197523] usb 3-2: New USB device found, idVendor=05ac, idProduct=1209
[ 1913.197529] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1913.197533] usb 3-2: Product: Rockbox media player
[ 1913.197536] usb 3-2: Manufacturer: Rockbox.org
[ 1913.197538] usb 3-2: SerialNumber: 300000000000A270015AFD77B
[ 1913.200247] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 1913.200473] scsi host14: usb-storage 3-2:1.0
[ 1913.212967] input: Rockbox.org Rockbox media player as /devices/pci0000:00/00
00:00:16.2/usb3/3-2/3-2:1.1/0003:05AC:1209.000F/input/input26
[ 1913.266374] hid-generic 0003:05AC:1209.000F: input,hidraw5: USB HID v1.10 Key
board [Rockbox.org Rockbox media player] on usb-0000:00:16.2-2/input1
[ 1914.200931] scsi 14:0:0:0: Direct-Access TOSHIBA MK1214GAH BW00 P
Q: 0 ANSI: 4
[ 1914.203647] sd 14:0:0:0: Attached scsi generic sg2 type 0
[ 1914.216682] sd 14:0:0:0: [sdc] 58610412 2048-byte logical blocks: (120 GB/112
GiB)
[ 1914.218910] sd 14:0:0:0: [sdc] Write Protect is off
[ 1914.218915] sd 14:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[ 1914.221159] sd 14:0:0:0: [sdc] No Caching mode page found
[ 1914.221164] sd 14:0:0:0: [sdc] Assuming drive cache: write through
[ 1914.233561] sdc: sdc1 sdc2
[ 1914.245792] sd 14:0:0:0: [sdc] Attached SCSI removable disk
[ 1915.071497] FAT-fs (sdc2): Volume was not properly unmounted. Some data may b
e corrupt. Please run fsck.
[ 5784.466980] usb 3-2: reset high-speed USB device number 12 using ehci-pci
[36857.906467] usb 3-2: USB disconnect, device number 12
[157875.830888] usb 1-2: new high-speed USB device number 7 using ehci-pci
[157875.972268] usb 1-2: New USB device found, idVendor=04b8, idProduct=0898
[157875.972274] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=
3
[157875.972278] usb 1-2: Product: EPSON XP-302 303 305 306 Series
[157875.972281] usb 1-2: Manufacturer: EPSON
[157875.972283] usb 1-2: SerialNumber: 51464D503132313241
[157875.979181] usb-storage 1-2:1.2: USB Mass Storage device detected
[157875.979273] scsi host15: usb-storage 1-2:1.2
[157876.564515] usblp 1-2:1.1: usblp2: USB Bidirectional printer dev 7 if 1 alt
0 proto 2 vid 0x04B8 pid 0x0898
[157876.564638] usbcore: registered new interface driver usblp
[157876.981680] scsi 15:0:0:0: Direct-Access EPSON Storage 1.00
PQ: 0 ANSI: 2
[157876.983164] sd 15:0:0:0: Attached scsi generic sg2 type 0
[157876.998020] sd 15:0:0:0: [sdc] Attached SCSI removable disk
[157881.683469] usblp2: removed
[157881.699764] usblp 1-2:1.1: usblp2: USB Bidirectional printer dev 7 if 1 alt
0 proto 2 vid 0x04B8 pid 0x0898
[157882.213301] usblp2: removed
[157890.733358] usblp 1-2:1.1: usblp2: USB Bidirectional printer dev 7 if 1 alt
0 proto 2 vid 0x04B8 pid 0x0898
[172558.115893] usb 1-2: USB disconnect, device number 7
[172558.117422] usblp2: removed
[178447.843591] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[178447.925941] r8169 0000:03:00.0 eth1: link down
[178447.926127] r8169 0000:03:00.0 eth1: link down
[178447.926301] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[178450.545536] r8169 0000:03:00.0 eth1: link up
[178450.545549] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[302917.196842] usb 1-1.1: new high-speed USB device number 8 using ehci-pci
[302917.291432] usb 1-1.1: New USB device found, idVendor=090c, idProduct=1000
[302917.291438] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumbe
r=0
[302917.291441] usb 1-1.1: Product: USB DISK
[302917.291443] usb 1-1.1: Manufacturer: SMI Corporation
[302917.291873] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[302917.293706] scsi host16: usb-storage 1-1.1:1.0
[302918.481150] scsi 16:0:0:0: Direct-Access SMI USB DISK 1100
PQ: 0 ANSI: 0 CCS
[302918.484070] sd 16:0:0:0: Attached scsi generic sg2 type 0
[302918.484458] sd 16:0:0:0: [sdc] 7864320 512-byte logical blocks: (4.03 GB/3.7
5 GiB)
[302918.485538] sd 16:0:0:0: [sdc] Write Protect is off
[302918.485544] sd 16:0:0:0: [sdc] Mode Sense: 43 00 00 00
[302918.487210] sd 16:0:0:0: [sdc] No Caching mode page found
[302918.487216] sd 16:0:0:0: [sdc] Assuming drive cache: write through
[302918.494364] sdc: sdc1
[302918.501725] sd 16:0:0:0: [sdc] Attached SCSI removable disk
[302918.755322] FAT-fs (sdc1): Volume was not properly unmounted. Some data may
be corrupt. Please run fsck.
[302958.979802] usb 1-1.1: USB disconnect, device number 8
[303056.193163] usb 1-1.1: new high-speed USB device number 9 using ehci-pci
[303056.287186] usb 1-1.1: New USB device found, idVendor=090c, idProduct=1000
[303056.287191] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumbe
r=0
[303056.287195] usb 1-1.1: Product: USB DISK
[303056.287197] usb 1-1.1: Manufacturer: SMI Corporation
[303056.287660] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[303056.288420] scsi host17: usb-storage 1-1.1:1.0
[303057.468587] scsi 17:0:0:0: Direct-Access SMI USB DISK 1100
PQ: 0 ANSI: 0 CCS
[303057.469613] sd 17:0:0:0: Attached scsi generic sg2 type 0
[303057.470450] sd 17:0:0:0: [sdc] 7864320 512-byte logical blocks: (4.03 GB/3.7
5 GiB)
[303057.471195] sd 17:0:0:0: [sdc] Write Protect is off
[303057.471199] sd 17:0:0:0: [sdc] Mode Sense: 43 00 00 00
[303057.472960] sd 17:0:0:0: [sdc] No Caching mode page found
[303057.472967] sd 17:0:0:0: [sdc] Assuming drive cache: write through
[303057.483491] sdc: sdc1
[303057.490403] sd 17:0:0:0: [sdc] Attached SCSI removable disk
[303057.736440] FAT-fs (sdc1): Volume was not properly unmounted. Some data may
be corrupt. Please run fsck.
[303092.854311] usb 1-1.1: USB disconnect, device number 9
[303141.175750] usb 1-1.1: new high-speed USB device number 10 using ehci-pci
[303141.269977] usb 1-1.1: New USB device found, idVendor=090c, idProduct=1000
[303141.269982] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumbe
r=0
[303141.269984] usb 1-1.1: Product: USB DISK
[303141.269986] usb 1-1.1: Manufacturer: SMI Corporation
[303141.270357] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[303141.273103] scsi host18: usb-storage 1-1.1:1.0
[303142.458884] scsi 18:0:0:0: Direct-Access SMI USB DISK 1100
PQ: 0 ANSI: 0 CCS
[303142.463377] sd 18:0:0:0: Attached scsi generic sg2 type 0
[303142.464646] sd 18:0:0:0: [sdc] 7864320 512-byte logical blocks: (4.03 GB/3.7
5 GiB)
[303142.466408] sd 18:0:0:0: [sdc] Write Protect is off
[303142.466415] sd 18:0:0:0: [sdc] Mode Sense: 43 00 00 00
[303142.467261] sd 18:0:0:0: [sdc] No Caching mode page found
[303142.467268] sd 18:0:0:0: [sdc] Assuming drive cache: write through
[303142.474507] sdc: sdc1
[303142.480031] sd 18:0:0:0: [sdc] Attached SCSI removable disk
[303142.719120] FAT-fs (sdc1): Volume was not properly unmounted. Some data may
be corrupt. Please run fsck.ça ne me parle pas trop, si tu peux m'éclairer...
Hors ligne
#10 Le 22/10/2016, à 11:27
- Oosfalte
Re : probleme de connexion internet dns?
Bonjour,
@linju, tu as tapé la commande suivante:
see sytemctl status dns-clean.serviceà la place de la commande demandée par sinbad83:
systemctl status dns-clean.servicesystemctl et non pas sytemctl
Hors ligne
#11 Le 22/10/2016, à 12:11
- linju
Re : probleme de connexion internet dns?
Merci, je n'avais pas fait gaffe!
@Oosfalte, @sinbad83, voici les différents résultats:
systemctl status dns-clean.service
● dns-clean.service - Clean up any mess left by 0dns-up
Loaded: loaded (/lib/systemd/system/dns-clean.service; enabled; vendor preset
Active: inactive (dead) since mar. 2016-10-18 21:55:34 CEST; 3 days ago
Process: 541 ExecStart=/etc/ppp/ip-down.d/0dns-down 0dns-clean (code=exited, s
Process: 521 ExecStartPre=/bin/mkdir /var/run/pppconfig (code=exited, status=0
Main PID: 541 (code=exited, status=0/SUCCESS)
oct. 18 21:55:34 lubuntu systemd[1]: Starting Clean up any mess left by 0dns-up.
oct. 18 21:55:34 lubuntu systemd[1]: Started Clean up any mess left by 0dns-up.
lines 1-9/9 (END)Ensuite:
journalctl
-- Logs begin at mar. 2016-10-18 21:55:32 CEST, end at sam. 2016-10-22 12:01:21
oct. 18 21:55:32 lubuntu systemd-journald[236]: Runtime journal (/run/log/journa
oct. 18 21:55:32 lubuntu kernel: Initializing cgroup subsys cpuset
oct. 18 21:55:32 lubuntu kernel: Initializing cgroup subsys cpu
oct. 18 21:55:32 lubuntu kernel: Initializing cgroup subsys cpuacct
oct. 18 21:55:32 lubuntu kernel: Linux version 4.4.0-43-generic (buildd@lgw01-22
oct. 18 21:55:32 lubuntu kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-43
oct. 18 21:55:32 lubuntu kernel: KERNEL supported cpus:
oct. 18 21:55:32 lubuntu kernel: Intel GenuineIntel
oct. 18 21:55:32 lubuntu kernel: AMD AuthenticAMD
oct. 18 21:55:32 lubuntu kernel: Centaur CentaurHauls
oct. 18 21:55:32 lubuntu kernel: tseg: 00af000000
oct. 18 21:55:32 lubuntu kernel: x86/fpu: xstate_offset[2]: 576, xstate_sizes[2
oct. 18 21:55:32 lubuntu kernel: x86/fpu: Supporting XSAVE feature 0x01: 'x87 fl
oct. 18 21:55:32 lubuntu kernel: x86/fpu: Supporting XSAVE feature 0x02: 'SSE re
oct. 18 21:55:32 lubuntu kernel: x86/fpu: Supporting XSAVE feature 0x04: 'AVX re
oct. 18 21:55:32 lubuntu kernel: x86/fpu: Enabled xstate features 0x7, context s
oct. 18 21:55:32 lubuntu kernel: x86/fpu: Using 'lazy' FPU context switches.
oct. 18 21:55:32 lubuntu kernel: e820: BIOS-provided physical RAM map:
oct. 18 21:55:32 lubuntu kernel: BIOS-e820: [mem 0x0000000000000000-0x0000000000
oct. 18 21:55:32 lubuntu kernel: BIOS-e820: [mem 0x000000000009e800-0x0000000000
oct. 18 21:55:32 lubuntu kernel: BIOS-e820: [mem 0x00000000000e0000-0x0000000000
oct. 18 21:55:32 lubuntu kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000ad
lines 1-23Et puis:
journalctl -xe
oct. 22 12:00:58 lubuntu gnome-session[1366]: (gnome-software:1741): GsPlugin-WA
oct. 22 12:00:58 lubuntu gnome-session[1366]: (gnome-software:1741): GsPlugin-WA
oct. 22 12:00:58 lubuntu gnome-session[1366]: (gnome-software:1741): GsPlugin-WA
oct. 22 12:00:58 lubuntu gnome-session[1366]: (gnome-software:1741): GsPlugin-WA
oct. 22 12:00:58 lubuntu gnome-session[1366]: (gnome-software:1741): GsPlugin-WA
oct. 22 12:00:58 lubuntu gnome-session[1366]: (gnome-software:1741): GsPlugin-WA
oct. 22 12:00:58 lubuntu gnome-session[1366]: (gnome-software:1741): GsPlugin-WA
oct. 22 12:00:58 lubuntu gnome-session[1366]: (gnome-software:1741): GsPlugin-WA
oct. 22 12:00:58 lubuntu gnome-session[1366]: (gnome-software:1741): GsPlugin-WA
oct. 22 12:00:58 lubuntu gnome-session[1366]: (gnome-software:1741): GsPlugin-WA
oct. 22 12:00:58 lubuntu gnome-session[1366]: (gnome-software:1741): GsPlugin-WA
oct. 22 12:00:59 lubuntu colord-sane[433]: io/hpmud/pp.c 627: unable to read dev
oct. 22 12:00:59 lubuntu gnome-session[1366]: (gnome-software:1741): Gs-WARNING
oct. 22 12:00:59 lubuntu gnome-session[1366]: (gnome-software:1741): Gs-WARNING
oct. 22 12:01:21 lubuntu systemd[1]: Started CUPS Scheduler.
-- Subject: L'unité (unit) cups.service a terminé son démarrage
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- L'unité (unit) cups.service a terminé son démarrage, avec le résultat done.
oct. 22 12:01:21 lubuntu colord[998]: (colord:998): Cd-WARNING **: failed to get
oct. 22 12:01:21 lubuntu colord[998]: (colord:998): Cd-WARNING **: failed to get
oct. 22 12:01:21 lubuntu colord[998]: (colord:998): Cd-WARNING **: failed to get
lines 1204-1226/1226 (END)Par contre cette commande ne donne rien:
journalctl -xejournalctl
journalctl : option invalide -- 'j'Pour moi, c'est toujours du charabia.... 
Hors ligne
#12 Le 24/10/2016, à 13:20
- linju
Re : probleme de connexion internet dns?
Ça n'inspire personne? 
Hors ligne
#13 Le 24/10/2016, à 14:03
- pires57
Re : probleme de connexion internet dns?
déjà avant de parler de DNS il faudrait voir ce que donne la communication en général.
que renvois les commandes suivantes :
ping 8.8.8.8
traceroute 8.8.8.8Utilisateur d'Archlinux, Ubuntu et Kali Linux
Administrateur système et réseau spécialisé Linux.
LinkedIn
Hors ligne
#14 Le 24/10/2016, à 14:58
- linju
Re : probleme de connexion internet dns?
Oui, c'est pourquoi j'ai mis un point interrogation dans le titre du topic
ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=56 time=18.6 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=56 time=18.7 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=56 time=18.3 ms
64 bytes from 8.8.8.8: icmp_seq=4 ttl=56 time=18.4 ms
64 bytes from 8.8.8.8: icmp_seq=5 ttl=56 time=18.3 ms
64 bytes from 8.8.8.8: icmp_seq=6 ttl=56 time=18.3 ms
64 bytes from 8.8.8.8: icmp_seq=7 ttl=56 time=17.7 ms
64 bytes from 8.8.8.8: icmp_seq=8 ttl=56 time=17.9 ms
64 bytes from 8.8.8.8: icmp_seq=9 ttl=56 time=18.2 ms
64 bytes from 8.8.8.8: icmp_seq=10 ttl=56 time=31.9 ms
64 bytes from 8.8.8.8: icmp_seq=11 ttl=56 time=19.5 ms
64 bytes from 8.8.8.8: icmp_seq=12 ttl=56 time=26.7 ms
64 bytes from 8.8.8.8: icmp_seq=13 ttl=56 time=32.3 ms
64 bytes from 8.8.8.8: icmp_seq=14 ttl=56 time=17.9 ms
64 bytes from 8.8.8.8: icmp_seq=15 ttl=56 time=18.3 ms
64 bytes from 8.8.8.8: icmp_seq=16 ttl=56 time=18.4 ms
64 bytes from 8.8.8.8: icmp_seq=17 ttl=56 time=18.3 msEt pour traceroute, le paquet n'est pas installé et je ne sais pas comment l'installer sans connexion, via un autre pc, clef usb?
Hors ligne
#15 Le 24/10/2016, à 15:08
- pires57
Re : probleme de connexion internet dns?
Le traceroute n'est pas important, ta connection fonctionne puisque tu obtiens des réponses aux reqêtes.
Que renvois
cat /etc/network/interfaces? tu ne devrais pas avoir que cela dedant.
Utilisateur d'Archlinux, Ubuntu et Kali Linux
Administrateur système et réseau spécialisé Linux.
LinkedIn
Hors ligne
#16 Le 24/10/2016, à 15:20
- linju
Re : probleme de connexion internet dns?
cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopbackJe ne comprends pas bien ta question. Je devrais avoir quoi dans quoi?
Hors ligne
#17 Le 24/10/2016, à 16:10
- yoname
Re : probleme de connexion internet dns?
Salut linju
C'est quoi ton problème au juste ???
- pas de connexion internet ?
- pas de ping sur dns google ?
J'ai vu que tu as fait la commande :
-sudo apt-get purge resolvconf (ATTENTION NE PAS CONFONDRE AVEC RESOLV.CONF)
le programme RESOLVCONF, enregistre les DNS dispo que lui donne ton systeme....(pour faire court)
par contre RESOLV.CONF est remis à jour après chaque restart par d'autres programmes pour la résolution de DNS
je te conseillerais de réinstaller RESOLVCONF
sudo apt-get remove --purge resolvconf && sudo apt-get install resolvconf.
a+
[img]https://i.postimg.cc/25frxn7k/Screenshot-20191101-124558.png[/img]
Hors ligne
#18 Le 24/10/2016, à 16:32
- pires57
Re : probleme de connexion internet dns?
l'interface que tu montres dans ton fichier est l'interface local (ou 127.0.0.1), elle ne te permet pas de sortir sur internet.
tu dois avoir une autre ligne avec eth1 donc donne le retour complet de la commande, c'est a dire de la commande de départ jusqu'au prompt de fin.
Utilisateur d'Archlinux, Ubuntu et Kali Linux
Administrateur système et réseau spécialisé Linux.
LinkedIn
Hors ligne
#19 Le 24/10/2016, à 22:09
- linju
Re : probleme de connexion internet dns?
@yoname
Mon problème, c'est que je n'arrive pas à accéder à internet, en tout cas en mode graphique (d'ailleurs, je ne sais pas comment faire autrement) et tout ce qui est en rapport avec internet ne me semble pas fonctionner malgré le fait que la commande ping renvoie quelque chose.
En fait, suite à mon problème de connexion j'ai suivi bêtement ce topic https://forum.ubuntu-fr.org/viewtopic.php?id=1518951 et me suis retrouvé bloqué quand il fallu réécrire avec nano.
Comme je l'avais écrit plus haut j'ai déjà supprimer resolvconf:
linju@lubuntu:~$ sudo apt-get remove --purge resolvconf
[sudo] Mot de passe de linju :
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Le paquet « resolvconf » n'est pas installé, et ne peut donc être supprimé
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
linux-headers-4.4.0-38 linux-headers-4.4.0-38-generic
linux-image-4.4.0-38-generic linux-image-extra-4.4.0-38-generic
linux-tools-4.4.0-38 linux-tools-4.4.0-38-generic
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 34 non mis à jour.et impossible de réinstaller resolvconf
sudo apt-get install resolvconf
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
linux-headers-4.4.0-38 linux-headers-4.4.0-38-generic
linux-image-4.4.0-38-generic linux-image-extra-4.4.0-38-generic
linux-tools-4.4.0-38 linux-tools-4.4.0-38-generic
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
Les NOUVEAUX paquets suivants seront installés :
resolvconf
0 mis à jour, 1 nouvellement installés, 0 à enlever et 34 non mis à jour.
Il est nécessaire de prendre 50,5 ko dans les archives.
Après cette opération, 180 ko d'espace disque supplémentaires seront utilisés.
Err:1 http://fr.archive.ubuntu.com/ubuntu xenial/main i386 resolvconf all 1.78ubuntu2
Erreur temporaire de résolution de « fr.archive.ubuntu.com »
Err:1 http://fr.archive.ubuntu.com/ubuntu xenial/main i386 resolvconf all 1.78ubuntu2
Erreur temporaire de résolution de « fr.archive.ubuntu.com »
E: Impossible de récupérer http://fr.archive.ubuntu.com/ubuntu/pool/main/r/resolvconf/resolvconf_1.78ubuntu2_all.deb Erreur temporaire de résolution de « fr.archive.ubuntu.com »
E: Impossible de récupérer certaines archives, peut-être devrez-vous lancer apt-get update ou essayer avec --fix-missing@pires57
La commande
linju@lubuntu:~$ cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopbackNe me renvoie que ça....
Hors ligne
#20 Le 24/10/2016, à 23:33
- jplemoine
Re : probleme de connexion internet dns?
linju a écrit :
0 mis à jour, 0 nouvellement installés, 0 à enlever et 34 non mis à jour.
34 non mis à jour --> Y aurait pas un problème de place et/ou d'i-nodes ?
Membre de l'ALDIL (Association Lyonnaise pour le Développement de l'Informatique Libre)
- En pro, après 20 ans de développement, administrateur Linux / Unix depuis Avril 2019.
- En privé, sous Ubuntu-Xubuntu depuis 2009.
Hors ligne
#21 Le 24/10/2016, à 23:38
- linju
Re : probleme de connexion internet dns?
@jplemoine
Pour la place, je ne pense pas, l'os est installé sur un ssd de 120go, il reste à priori 88go.
Quant aux i-nodes c'est quoi?
Hors ligne
#22 Le 25/10/2016, à 00:03
- jplemoine
Re : probleme de connexion internet dns?
Peux-tu donner le résultat en bonne et due forme de
df -h
df -ilinju a écrit :
Quant aux i-nodes c'est quoi?
Ton moteur de recherche préféré doit avoir la solution : j'ai peur de te dire des bêtises...
Membre de l'ALDIL (Association Lyonnaise pour le Développement de l'Informatique Libre)
- En pro, après 20 ans de développement, administrateur Linux / Unix depuis Avril 2019.
- En privé, sous Ubuntu-Xubuntu depuis 2009.
Hors ligne
#23 Le 25/10/2016, à 00:11
- linju
Re : probleme de connexion internet dns?
Voilà
linju@lubuntu:~$ df -h
Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
udev 1,6G 0 1,6G 0% /dev
tmpfs 314M 14M 301M 5% /run
/dev/sdb5 102G 15G 83G 15% /
tmpfs 1,6G 344K 1,6G 1% /dev/shm
tmpfs 5,0M 4,0K 5,0M 1% /run/lock
tmpfs 1,6G 0 1,6G 0% /sys/fs/cgroup
/dev/sda5 1,8T 1,2T 542G 69% /home
cgmfs 100K 0 100K 0% /run/cgmanager/fs
tmpfs 314M 116K 314M 1% /run/user/1000
linju@lubuntu:~$ df -i
Sys. de fichiers Inœuds IUtil. ILibre IUti% Monté sur
udev 396793 586 396207 1% /dev
tmpfs 401843 855 400988 1% /run
/dev/sdb5 6782976 1222014 5560962 19% /
tmpfs 401843 7 401836 1% /dev/shm
tmpfs 401843 6 401837 1% /run/lock
tmpfs 401843 18 401825 1% /sys/fs/cgroup
/dev/sda5 122101760 197377 121904383 1% /home
cgmfs 401843 14 401829 1% /run/cgmanager/fs
tmpfs 401843 45 401798 1% /run/user/1000Pour les i-nodes , j'ai consulté wikipedia, si je comprends bien ce serait en rapport avec le fait que je n'arrive pas à écrire dans resolvconf?
Hors ligne
#24 Le 25/10/2016, à 00:18
- jplemoine
Re : probleme de connexion internet dns?
linju a écrit :
Pour les i-nodes , j'ai consulté wikipedia, si je comprends bien ce serait en rapport avec le fait que je n'arrive pas à écrire dans resolvconf?
Oui mais non : fausse piste car l'un comme l'autre montre qu'il y a de la marge.
Membre de l'ALDIL (Association Lyonnaise pour le Développement de l'Informatique Libre)
- En pro, après 20 ans de développement, administrateur Linux / Unix depuis Avril 2019.
- En privé, sous Ubuntu-Xubuntu depuis 2009.
Hors ligne
#25 Le 25/10/2016, à 00:21
- linju
Re : probleme de connexion internet dns?
humhum.....
ça me laisse dans l'embarras tout ça.... 
Hors ligne