Ubuntu-fr

Eikasia

[Résolu] Installation ubuntu : live usb ne trouve pas le disque dur

Bonjour,

Tout est dans le titre ou presque. J'essaie d'installer ubuntu sur une machine. Je boot sur la clé usb mais à l'installation ubuntu ne détecte que la clé. Impossible de mettre la main sur le disque dur qui apparaît pourtant dans le bios de la machine.

J'essaie de trouver une solution mais pas moyen de le détecter. Est-ce que quelqu'un, de plus doué que moi, pourrait me donner un conseil ?

Merci beaucoup

ubuntu@ubuntu:~$ sudo lshw -class disk
  *-disk                  
       description: SCSI Disk
       physical id: 0.0.0
       bus info: scsi@2:0.0.0
       logical name: /dev/sda
       size: 7635MiB (8006MB)
       capabilities: partitioned partitioned:dos
       configuration: logicalsectorsize=512 sectorsize=512 signature=000a4606

Dernière modification par Eikasia (Le 21/11/2016, à 19:39)

---

Ubuntu 14.04 LTS (64 bits) :  boîtier, Textorm 69U6 ; alim, LDLC BG-400 Quality Select 80PLUS Bronze ; cm, Gigabyte GA-F2A75M-D3H ; proc, AMD A8-5600K (3.6 GHz) B E ; ram, Kingston HyperX 4 Go (2x 2Go) DDR3 1600 MHz ; cg, ASUS 210-1GD3-L 1 GB ; dd, Seagate Barracuda 7200.14 SATA 6Gb/s 1 To ; dd, Seagate ST3250624AS ; impri/scan HP PSC 1510.
Ubuntu 12.04 LTS (32 bits) : portable ASUS K53E-SX1254V.

Babdu89

Re : [Résolu] Installation ubuntu : live usb ne trouve pas le disque dur

Bonjour.

et un

sudo fdisk -l

Avec un L minuscule. Donne quoi?

@+.  Babdu89  .

---

J'ai découvert Ubuntu avec la 07.10.... Et alors?!...  Depuis je regarde de temps en temps si Windows marche toujours....

Eikasia

Re : [Résolu] Installation ubuntu : live usb ne trouve pas le disque dur

Bonjour Babdu89

Voilà ce que ça donne :

ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/loop0: 1.3 GiB, 1433468928 bytes, 2799744 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 7.5 GiB, 8006901760 bytes, 15638480 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x000a4606

Device     Boot Start      End  Sectors  Size Id Type
/dev/sda1  *       63 15638111 15638049  7.5G  c W95 FAT32 (LBA)
ubuntu@ubuntu:~$ 

---

Ubuntu 14.04 LTS (64 bits) :  boîtier, Textorm 69U6 ; alim, LDLC BG-400 Quality Select 80PLUS Bronze ; cm, Gigabyte GA-F2A75M-D3H ; proc, AMD A8-5600K (3.6 GHz) B E ; ram, Kingston HyperX 4 Go (2x 2Go) DDR3 1600 MHz ; cg, ASUS 210-1GD3-L 1 GB ; dd, Seagate Barracuda 7200.14 SATA 6Gb/s 1 To ; dd, Seagate ST3250624AS ; impri/scan HP PSC 1510.
Ubuntu 12.04 LTS (32 bits) : portable ASUS K53E-SX1254V.

Babdu89

Re : [Résolu] Installation ubuntu : live usb ne trouve pas le disque dur

Vu ta signature, tu n'es pas à ta première installation...
Le disque est vu comment par Gparted en session live. Il est formaté, il y une partition avec un format de fichier quelconque?.
Veux tu bien en dire un peu plus sur le disque où tu veux faire l'installation?.

@+.   Babdu89  .

Dernière modification par Babdu89 (Le 11/06/2016, à 18:43)

---

J'ai découvert Ubuntu avec la 07.10.... Et alors?!...  Depuis je regarde de temps en temps si Windows marche toujours....

Eikasia

Re : [Résolu] Installation ubuntu : live usb ne trouve pas le disque dur

Bonsoir,

Je n'en suis pas à ma première install mais je ne suis pas doué pour autant...et je suis vite perdu dès que ça devient trop technique pour moi. Mais j'essaie d'apprendre...

Justement, le disque n'apparaît pas sur Gparted. Seulement la clé usb (en /dev/sda1). C'est un vieux disque dur qui me servait de backup sur une ancienne config (la première qui apparaît dans ma signature.. ce qui me fait penser à faire la maj de ma signature) Seagate ST3250624AS. Normalement, il devrait être en ext3 (je n'avais pas de dual boot linux/windows sur cette machine). Dans le bios, il apparaît en Sata1. Mais une fois sur ubuntu live, plus de traces.

En fait, la config sur laquelle j'essaie de faire l'install est celle placée en tête de la signature (je file la config à une amie), moins le 1er disque dur 1To que j'ai transféré sur ma nouvelle config pour servir à son tour de backup.

---

Ubuntu 14.04 LTS (64 bits) :  boîtier, Textorm 69U6 ; alim, LDLC BG-400 Quality Select 80PLUS Bronze ; cm, Gigabyte GA-F2A75M-D3H ; proc, AMD A8-5600K (3.6 GHz) B E ; ram, Kingston HyperX 4 Go (2x 2Go) DDR3 1600 MHz ; cg, ASUS 210-1GD3-L 1 GB ; dd, Seagate Barracuda 7200.14 SATA 6Gb/s 1 To ; dd, Seagate ST3250624AS ; impri/scan HP PSC 1510.
Ubuntu 12.04 LTS (32 bits) : portable ASUS K53E-SX1254V.

Babdu89

Re : [Résolu] Installation ubuntu : live usb ne trouve pas le disque dur

Bonsoir.

Merci pour les explications.
Désolé, mais je ne saurais pas t'aider plus avant. Attends qu'un spécialiste des disques dur vienne en aide.

@+.   Babdu89  .

---

J'ai découvert Ubuntu avec la 07.10.... Et alors?!...  Depuis je regarde de temps en temps si Windows marche toujours....

CRIMA

Re : [Résolu] Installation ubuntu : live usb ne trouve pas le disque dur

Bonjour

A tout hasard, avez-vous un DVD d'installation Windows afin de voir si Windows reconnait votre disque ?
L'avez vous essayé sur une autre machine ?
Gparted que vous utilisez est situé où ? sur une clé, un CD ou autre ?

Vos réponse pourront peut-être aider des spacialistes à y voir plus clair si je n'ai pas de solution .
Salutations

---

Ordi HP Z200 - Processeur Intel I3 - chipset graphique IntelHD - 8 Go ram -

Eikasia

Re : [Résolu] Installation ubuntu : live usb ne trouve pas le disque dur

Merci beaucoup Babdu89

Bonjour CRIMA

Je n'ai pas de lecteur dvd sur cette unité centrale. Ils ont été utilités pour une nouvelle machine. Je n'ai utilisé qu'une clé usb pour lancer ubuntu live (16.04 lts) et c'est le gparted de la session live de la clé.

J'avoue que je sèche un peu.

---

Ubuntu 14.04 LTS (64 bits) :  boîtier, Textorm 69U6 ; alim, LDLC BG-400 Quality Select 80PLUS Bronze ; cm, Gigabyte GA-F2A75M-D3H ; proc, AMD A8-5600K (3.6 GHz) B E ; ram, Kingston HyperX 4 Go (2x 2Go) DDR3 1600 MHz ; cg, ASUS 210-1GD3-L 1 GB ; dd, Seagate Barracuda 7200.14 SATA 6Gb/s 1 To ; dd, Seagate ST3250624AS ; impri/scan HP PSC 1510.
Ubuntu 12.04 LTS (32 bits) : portable ASUS K53E-SX1254V.

lucmars

Re : [Résolu] Installation ubuntu : live usb ne trouve pas le disque dur

Donc sur le seagate, il y a toujours la 1404, si oui, cela boot-il ?

---

Gaulois Matter !

Babdu89

Re : [Résolu] Installation ubuntu : live usb ne trouve pas le disque dur

Post#5, il est dit que le Seagate servait à faire des backup. Il n'y avait pas d'Os installé dessus... À confirmer.

@+.   Babdu89  .

---

J'ai découvert Ubuntu avec la 07.10.... Et alors?!...  Depuis je regarde de temps en temps si Windows marche toujours....

Bougron

Re : [Résolu] Installation ubuntu : live usb ne trouve pas le disque dur

Bonjour
On va regarder comment il est accroché   au démarrage.    Comme je ne connais pas les mots clés, tu vas donner toute la trace

dmesg   >TRACE.txt
gedit TRACE.txt

Eikasia

Re : [Résolu] Installation ubuntu : live usb ne trouve pas le disque dur

Bonjour,

Je reviens vers vous après avoir dû, bien contre moi, mettre de côté ce problème. Aujourd'hui, j'ai à nouveau un peu de temps pour m'y remettre. En espérant trouver la solution.

Pour répondre à une question précédemment posée, le disque dur servait de backup sur ma dernière installation mais, même si je ne m'en souviens plus, il a très bien pu accueillir des OS avant (xp et ubuntu). En ce cas, le problème ne pourrait-il pas venir d'un GRUB défectueux ? Le cas échéant, comment le réparer avec boot-repair si le live usb ne détecte pas le hdd ?

Le live usb pour l'installation ne détecte que la clé usb elle-même quand je veux faire une installation.

Merci beaucoup pour votre aide. Le problème dépasse, de loin, mes compétences, bien que je sois sous GNU/Linux depuis plus de 10 ans.

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-21-generic (buildd@lgw01-21) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #37-Ubuntu SMP Mon Apr 18 18:33:37 UTC 2016 (Ubuntu 4.4.0-21.37-generic 4.4.6)
[    0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] tseg: 00bf800000
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be7f5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be7f6000-0x00000000beaf9fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000beafa000-0x00000000beb03fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000beb04000-0x00000000bee51fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bee52000-0x00000000bf11afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf11b000-0x00000000bf167fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000bf168000-0x00000000bf168fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf169000-0x00000000bf36efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf36f000-0x00000000bf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000013effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0xbeafc000  ACPI 2.0=0xbeafc000  SMBIOS=0xf04c0  MPS=0xfd450 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A75M-D3H, BIOS F3 09/20/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000BF800000 mask FFFFFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000013f000000 aka 5104M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3064MB, range: 8MB, type UC
[    0.000000] total RAM covered: 3064M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 16M 	num_reg: 3  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3064MB, range: 8MB, type UC
[    0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf] mapped at [ffff8800000fd7b0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x021fe000, 0x021fefff] PGTABLE
[    0.000000] BRK [0x021ff000, 0x021fffff] PGTABLE
[    0.000000] BRK [0x02200000, 0x02200fff] PGTABLE
[    0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[    0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x34d9a000-0x366c4fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000BEAFC000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000BEAFC088 00008C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000BEB021D0 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
[    0.000000] ACPI: DSDT 0x00000000BEAFC1A0 006029 (v02 ALASKA A M I    00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000BEE4AD80 000040
[    0.000000] ACPI: APIC 0x00000000BEB022C8 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000BEB02340 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000BEB02388 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: MSDM 0x00000000BEB023C8 000055 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: HPET 0x00000000BEB02420 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: MSDM 0x00000000BEB02458 000055 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: IFEU 0x00000000BEB024B0 000042 (v01 ALASKA A M I    01072009      00000000)
[    0.000000] ACPI: BGRT 0x00000000BEB024F8 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000BEB02530 000D40 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000BEB03270 0004B7 (v02 AMD    ALIB     00000001 MSFT 04000000)
[    0.000000] ACPI: IVRS 0x00000000BEB03728 000070 (v02 AMD    AMDIOMMU 00000001 AMD  00000000)
[    0.000000] ACPI: CRAT 0x00000000BEB03798 0002A8 (v01 AMD    AGESA    00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13eff8000-0x13effcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000be7f5fff]
[    0.000000]   node   0: [mem 0x00000000bf168000-0x00000000bf168fff]
[    0.000000]   node   0: [mem 0x00000000bf36f000-0x00000000bf7fffff]
[    0.000000]   node   0: [mem 0x0000000100001000-0x000000013effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013effffff]
[    0.000000] On node 0 totalpages: 1039398
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 25 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12147 pages used for memmap
[    0.000000]   DMA32 zone: 777352 pages, LIFO batch:31
[    0.000000]   Normal zone: 4032 pages used for memmap
[    0.000000]   Normal zone: 258047 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe7f6000-0xbeaf9fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbeafa000-0xbeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbeb04000-0xbee51fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbee52000-0xbf11afff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf11b000-0xbf167fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf169000-0xbf36efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[    0.000000] e820: [mem 0xbf800000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88013ec00000 s98008 r8192 d28968 u524288
[    0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1023130
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3799244K/4157592K available (8356K kernel code, 1278K rwdata, 3920K rodata, 1476K init, 1292K bss, 358348K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:16640 nr_irqs:456 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3593.230 MHz processor
[    0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 7186.46 BogoMIPS (lpj=14372920)
[    0.000025] pid_max: default: 32768 minimum: 301
[    0.000030] ACPI: Core revision 20150930
[    0.003061] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.003718] Security Framework initialized
[    0.003720] Yama: becoming mindful.
[    0.003734] AppArmor: AppArmor initialized
[    0.003988] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.005045] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.005527] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.005533] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.005743] Initializing cgroup subsys io
[    0.005748] Initializing cgroup subsys memory
[    0.005755] Initializing cgroup subsys devices
[    0.005758] Initializing cgroup subsys freezer
[    0.005761] Initializing cgroup subsys net_cls
[    0.005763] Initializing cgroup subsys perf_event
[    0.005767] Initializing cgroup subsys net_prio
[    0.005768] Initializing cgroup subsys hugetlb
[    0.005770] Initializing cgroup subsys pids
[    0.005790] CPU: Physical Processor ID: 0
[    0.005791] CPU: Processor Core ID: 0
[    0.005793] mce: CPU supports 7 MCE banks
[    0.005803] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.005804] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.006049] Freeing SMP alternatives memory: 28K (ffffffff820b2000 - ffffffff820b9000)
[    0.038226] ftrace: allocating 31878 entries in 125 pages
[    0.048122] smpboot: Max logical packages: 2
[    0.048125] smpboot: APIC(10) Converting physical 1 to logical package 0
[    0.132580] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.279259] smpboot: CPU0: AMD A8-5600K APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x10, stepping: 0x1)
[    0.279270] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.279274] ... version:                0
[    0.279275] ... bit width:              48
[    0.279276] ... generic registers:      6
[    0.279277] ... value mask:             0000ffffffffffff
[    0.279278] ... max period:             00007fffffffffff
[    0.279278] ... fixed-purpose events:   0
[    0.279279] ... event mask:             000000000000003f
[    0.279932] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.279999] x86: Booting SMP configuration:
[    0.280001] .... node  #0, CPUs:      #1 #2 #3
[    0.286682] x86: Booted up 1 node, 4 CPUs
[    0.286685] smpboot: Total of 4 processors activated (28745.84 BogoMIPS)
[    0.288086] devtmpfs: initialized
[    0.290605] evm: security.selinux
[    0.290606] evm: security.SMACK64
[    0.290607] evm: security.SMACK64EXEC
[    0.290608] evm: security.SMACK64TRANSMUTE
[    0.290609] evm: security.SMACK64MMAP
[    0.290610] evm: security.ima
[    0.290610] evm: security.capability
[    0.290685] PM: Registering ACPI NVS region [mem 0xbeb04000-0xbee51fff] (3465216 bytes)
[    0.290732] PM: Registering ACPI NVS region [mem 0xbf169000-0xbf36efff] (2121728 bytes)
[    0.290828] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.290904] pinctrl core: initialized pinctrl subsystem
[    0.291004] RTC time: 17:24:44, date: 11/12/16
[    0.291102] NET: Registered protocol family 16
[    0.303366] cpuidle: using governor ladder
[    0.315365] cpuidle: using governor menu
[    0.315374] PCCT header not found.
[    0.315516] ACPI: bus type PCI registered
[    0.315517] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.315599] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.315601] PCI: not using MMCONFIG
[    0.315603] PCI: Using configuration type 1 for base access
[    0.315603] PCI: Using configuration type 1 for extended access
[    0.327850] ACPI: Added _OSI(Module Device)
[    0.327853] ACPI: Added _OSI(Processor Device)
[    0.327854] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.327855] ACPI: Added _OSI(Processor Aggregator Device)
[    0.329217] ACPI: Executed 1 blocks of module-level executable AML code
[    0.330994] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.331399] ACPI: Interpreter enabled
[    0.331404] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.331408] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.331420] ACPI: (supports S0 S3 S4 S5)
[    0.331422] ACPI: Using IOAPIC for interrupt routing
[    0.331537] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.331568] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.331578] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.336310] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.336315] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.336489] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.336750] PCI host bridge to bus 0000:00
[    0.336753] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.336755] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.336756] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.336758] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.336759] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.336761] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.336762] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[    0.336764] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.336770] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[    0.336856] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
[    0.336951] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
[    0.336987] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.337023] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.337060] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[    0.337095] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.337130] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.337183] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
[    0.337218] pci 0000:00:10.0: reg 0x10: [mem 0xfe106000-0xfe107fff 64bit]
[    0.337290] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.337334] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.337378] pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
[    0.337413] pci 0000:00:10.1: reg 0x10: [mem 0xfe104000-0xfe105fff 64bit]
[    0.337486] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[    0.337536] pci 0000:00:10.1: System wakeup disabled by ACPI
[    0.337580] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[    0.337601] pci 0000:00:11.0: reg 0x10: [io  0xf040-0xf047]
[    0.337608] pci 0000:00:11.0: reg 0x14: [io  0xf030-0xf033]
[    0.337616] pci 0000:00:11.0: reg 0x18: [io  0xf020-0xf027]
[    0.337623] pci 0000:00:11.0: reg 0x1c: [io  0xf010-0xf013]
[    0.337630] pci 0000:00:11.0: reg 0x20: [io  0xf000-0xf00f]
[    0.337638] pci 0000:00:11.0: reg 0x24: [mem 0xfe10d000-0xfe10d7ff]
[    0.337720] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[    0.337733] pci 0000:00:12.0: reg 0x10: [mem 0xfe10c000-0xfe10cfff]
[    0.337806] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.337843] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[    0.337864] pci 0000:00:12.2: reg 0x10: [mem 0xfe10b000-0xfe10b0ff]
[    0.337919] pci 0000:00:12.2: supports D1 D2
[    0.337921] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.337956] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.337994] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[    0.338007] pci 0000:00:13.0: reg 0x10: [mem 0xfe10a000-0xfe10afff]
[    0.338080] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.338118] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[    0.338138] pci 0000:00:13.2: reg 0x10: [mem 0xfe109000-0xfe1090ff]
[    0.338194] pci 0000:00:13.2: supports D1 D2
[    0.338195] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.338229] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.338268] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.338365] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    0.338386] pci 0000:00:14.2: reg 0x10: [mem 0xfe100000-0xfe103fff 64bit]
[    0.338433] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.338466] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.338500] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.338613] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[    0.338670] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.338718] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[    0.338739] pci 0000:00:14.5: reg 0x10: [mem 0xfe108000-0xfe108fff]
[    0.338814] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.338852] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[    0.338917] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[    0.338984] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[    0.339046] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[    0.339110] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[    0.339172] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[    0.339283] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
[    0.339302] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[    0.339312] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.339321] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.339328] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.339334] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
[    0.339409] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[    0.339427] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
[    0.347381] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.347387] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.347390] pci 0000:00:02.0:   bridge window [mem 0xfd000000-0xfe0fffff]
[    0.347394] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.347473] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.347511] pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.347531] pci 0000:02:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
[    0.347544] pci 0000:02:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
[    0.347598] pci 0000:02:00.0: supports D1 D2
[    0.347600] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.347637] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.355380] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.355387] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    0.355392] pci 0000:00:04.0:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.355479] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[    0.355487] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.355488] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.355490] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    0.355492] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.355493] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.355495] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.355496] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[    0.355982] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.356035] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.356089] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.356143] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.356186] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.356221] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.356255] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.356289] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.356572] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.356574] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.356575] vgaarb: loaded
[    0.356576] vgaarb: bridge control possible 0000:01:00.0
[    0.356810] SCSI subsystem initialized
[    0.356872] libata version 3.00 loaded.
[    0.356893] ACPI: bus type USB registered
[    0.356909] usbcore: registered new interface driver usbfs
[    0.356919] usbcore: registered new interface driver hub
[    0.356935] usbcore: registered new device driver usb
[    0.357113] PCI: Using ACPI for IRQ routing
[    0.363912] PCI: pci_cache_line_size set to 64 bytes
[    0.363957] e820: reserve RAM buffer [mem 0xbe7f6000-0xbfffffff]
[    0.363959] e820: reserve RAM buffer [mem 0xbf169000-0xbfffffff]
[    0.363960] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[    0.363961] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[    0.364065] NetLabel: Initializing
[    0.364066] NetLabel:  domain hash size = 128
[    0.364067] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.364077] NetLabel:  unlabeled traffic allowed by default
[    0.364237] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.364239] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.367336] clocksource: Switched to clocksource hpet
[    0.373879] AppArmor: AppArmor Filesystem Enabled
[    0.373946] pnp: PnP ACPI init
[    0.374066] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.374070] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.374295] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.374297] system 00:01: [io  0x040b] has been reserved
[    0.374299] system 00:01: [io  0x04d6] has been reserved
[    0.374301] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.374303] system 00:01: [io  0x0c14] has been reserved
[    0.374304] system 00:01: [io  0x0c50-0x0c51] has been reserved
[    0.374306] system 00:01: [io  0x0c52] has been reserved
[    0.374308] system 00:01: [io  0x0c6c] has been reserved
[    0.374309] system 00:01: [io  0x0c6f] has been reserved
[    0.374311] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.374312] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.374314] system 00:01: [io  0x0cd4-0x0cd5] has been reserved
[    0.374315] system 00:01: [io  0x0cd6-0x0cd7] has been reserved
[    0.374317] system 00:01: [io  0x0cd8-0x0cdf] has been reserved
[    0.374319] system 00:01: [io  0x0800-0x089f] could not be reserved
[    0.374321] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    0.374322] system 00:01: [io  0x0900-0x090f] has been reserved
[    0.374324] system 00:01: [io  0x0910-0x091f] has been reserved
[    0.374326] system 00:01: [io  0xfe00-0xfefe] has been reserved
[    0.374328] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.374330] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.374332] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.374333] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.374335] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.374337] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[    0.374339] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[    0.374342] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.374466] system 00:02: [io  0x0220-0x0227] has been reserved
[    0.374468] system 00:02: [io  0x0228-0x0237] has been reserved
[    0.374470] system 00:02: [io  0x0a20-0x0a2f] has been reserved
[    0.374472] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.374517] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.374709] pnp 00:04: [dma 0 disabled]
[    0.374755] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.374981] pnp 00:05: [dma 0 disabled]
[    0.375072] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.375098] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.375144] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.375147] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.375185] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.375297] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.375372] system 00:0a: [mem 0xfeb80000-0xfebfffff] could not be reserved
[    0.375374] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.375467] pnp: PnP ACPI: found 11 devices
[    0.382161] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.382181] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.382183] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.382186] pci 0000:00:02.0:   bridge window [mem 0xfd000000-0xfe0fffff]
[    0.382189] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.382192] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.382194] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    0.382198] pci 0000:00:04.0:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.382201] pci 0000:00:14.4: PCI bridge to [bus 03]
[    0.382211] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.382213] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.382214] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.382216] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.382217] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.382219] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.382220] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[    0.382222] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.382223] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
[    0.382225] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.382226] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.382228] pci_bus 0000:02: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.382229] pci_bus 0000:03: resource 4 [io  0x0000-0x03af window]
[    0.382231] pci_bus 0000:03: resource 5 [io  0x03e0-0x0cf7 window]
[    0.382232] pci_bus 0000:03: resource 6 [io  0x03b0-0x03df window]
[    0.382234] pci_bus 0000:03: resource 7 [io  0x0d00-0xffff window]
[    0.382235] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.382236] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.382238] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff window]
[    0.382267] NET: Registered protocol family 2
[    0.382434] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.382539] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.382649] TCP: Hash tables configured (established 32768 bind 32768)
[    0.382683] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.382701] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.382755] NET: Registered protocol family 1
[    0.627499] pci 0000:01:00.0: Video device with shadowed ROM
[    0.627510] PCI: CLS 64 bytes, default 64
[    0.627569] Trying to unpack rootfs image as initramfs...
[    4.493317] Freeing initrd memory: 25772K (ffff880034d9a000 - ffff8800366c5000)
[    4.493442] AMD-Vi: Applying erratum 746 workaround for IOMMU at 0000:00:00.2
[    4.494330] iommu: Adding device 0000:00:02.0 to group 0
[    4.494697] iommu: Adding device 0000:00:04.0 to group 1
[    4.495063] iommu: Adding device 0000:00:10.0 to group 2
[    4.495079] iommu: Adding device 0000:00:10.1 to group 2
[    4.495431] iommu: Adding device 0000:00:11.0 to group 3
[    4.495832] iommu: Adding device 0000:00:12.0 to group 4
[    4.495846] iommu: Adding device 0000:00:12.2 to group 4
[    4.496220] iommu: Adding device 0000:00:13.0 to group 5
[    4.496233] iommu: Adding device 0000:00:13.2 to group 5
[    4.496615] iommu: Adding device 0000:00:14.0 to group 6
[    4.496628] iommu: Adding device 0000:00:14.2 to group 6
[    4.496640] iommu: Adding device 0000:00:14.3 to group 6
[    4.496995] iommu: Adding device 0000:00:14.4 to group 7
[    4.497349] iommu: Adding device 0000:00:14.5 to group 8
[    4.497722] iommu: Adding device 0000:00:18.0 to group 9
[    4.497736] iommu: Adding device 0000:00:18.1 to group 9
[    4.497749] iommu: Adding device 0000:00:18.2 to group 9
[    4.497763] iommu: Adding device 0000:00:18.3 to group 9
[    4.497776] iommu: Adding device 0000:00:18.4 to group 9
[    4.497789] iommu: Adding device 0000:00:18.5 to group 9
[    4.497800] iommu: Adding device 0000:01:00.0 to group 0
[    4.497809] iommu: Adding device 0000:01:00.1 to group 0
[    4.497820] iommu: Adding device 0000:02:00.0 to group 1
[    4.497821] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[    4.497822] AMD-Vi:  Extended features:  PreF PPR GT IA
[    4.497825] AMD-Vi: Interrupt remapping enabled
[    4.498071] AMD-Vi: Lazy IO/TLB flushing enabled
[    4.500007] perf: AMD NB counters detected
[    4.500079] LVT offset 0 assigned for vector 0x400
[    4.500093] perf: AMD IBS detected (0x000000ff)
[    4.500167] Scanning for low memory corruption every 60 seconds
[    4.500516] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    4.500544] audit: initializing netlink subsys (disabled)
[    4.500570] audit: type=2000 audit(1478971488.288:1): initialized
[    4.500864] Initialise system trusted keyring
[    4.501065] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    4.501066] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    4.502624] zbud: loaded
[    4.502878] VFS: Disk quotas dquot_6.6.0
[    4.502909] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    4.503471] fuse init (API version 7.23)
[    4.503592] Key type big_key registered
[    4.504097] Key type asymmetric registered
[    4.504099] Asymmetric key parser 'x509' registered
[    4.504133] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    4.504169] io scheduler noop registered
[    4.504172] io scheduler deadline registered (default)
[    4.504201] io scheduler cfq registered
[    4.504715] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[    4.504718] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    4.504719] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[    4.504722] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[    4.504737] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[    4.504739] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    4.504741] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[    4.504746] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.504752] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    4.504781] efifb: probing for efifb
[    4.504792] efifb: framebuffer at 0xd1000000, mapped to 0xffffc90000a00000, using 1920k, total 1920k
[    4.504793] efifb: mode is 800x600x32, linelength=3200, pages=1
[    4.504794] efifb: scrolling: redraw
[    4.504795] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    4.505892] Console: switching to colour frame buffer device 100x37
[    4.506783] fb0: EFI VGA frame buffer device
[    4.506853] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    4.506856] ACPI: Power Button [PWRB]
[    4.506894] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    4.506895] ACPI: Power Button [PWRF]
[    4.506984] ACPI: acpi_idle registered with cpuidle
[    4.507381] GHES: HEST is not enabled!
[    4.507479] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    4.527836] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    4.529390] Linux agpgart interface v0.103
[    4.533602] brd: module loaded
[    4.534825] loop: module loaded
[    4.535035] libphy: Fixed MDIO Bus: probed
[    4.535037] tun: Universal TUN/TAP device driver, 1.6
[    4.535039] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    4.535092] PPP generic driver version 2.4.2
[    4.535150] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.535154] ehci-pci: EHCI PCI platform driver
[    4.535261] QUIRK: Enable AMD PLL fix
[    4.535280] ehci-pci 0000:00:12.2: EHCI Host Controller
[    4.535285] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    4.535289] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    4.535297] ehci-pci 0000:00:12.2: debug port 1
[    4.535337] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe10b000
[    4.543738] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    4.543794] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.543796] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.543798] usb usb1: Product: EHCI Host Controller
[    4.543799] usb usb1: Manufacturer: Linux 4.4.0-21-generic ehci_hcd
[    4.543801] usb usb1: SerialNumber: 0000:00:12.2
[    4.543942] hub 1-0:1.0: USB hub found
[    4.543948] hub 1-0:1.0: 5 ports detected
[    4.544199] ehci-pci 0000:00:13.2: EHCI Host Controller
[    4.544204] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    4.544208] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    4.544216] ehci-pci 0000:00:13.2: debug port 1
[    4.544244] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe109000
[    4.555727] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    4.555788] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    4.555790] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.555791] usb usb2: Product: EHCI Host Controller
[    4.555793] usb usb2: Manufacturer: Linux 4.4.0-21-generic ehci_hcd
[    4.555794] usb usb2: SerialNumber: 0000:00:13.2
[    4.555930] hub 2-0:1.0: USB hub found
[    4.555936] hub 2-0:1.0: 5 ports detected
[    4.556071] ehci-platform: EHCI generic platform driver
[    4.556087] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.556095] ohci-pci: OHCI PCI platform driver
[    4.556231] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    4.556235] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    4.556264] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe10c000
[    4.615783] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    4.615786] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.615788] usb usb3: Product: OHCI PCI host controller
[    4.615790] usb usb3: Manufacturer: Linux 4.4.0-21-generic ohci_hcd
[    4.615791] usb usb3: SerialNumber: 0000:00:12.0
[    4.616013] hub 3-0:1.0: USB hub found
[    4.616020] hub 3-0:1.0: 5 ports detected
[    4.616245] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    4.616250] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[    4.616274] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe10a000
[    4.675765] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    4.675769] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.675771] usb usb4: Product: OHCI PCI host controller
[    4.675772] usb usb4: Manufacturer: Linux 4.4.0-21-generic ohci_hcd
[    4.675773] usb usb4: SerialNumber: 0000:00:13.0
[    4.675991] hub 4-0:1.0: USB hub found
[    4.675998] hub 4-0:1.0: 5 ports detected
[    4.676226] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    4.676230] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[    4.676253] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe108000
[    4.735763] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    4.735766] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.735768] usb usb5: Product: OHCI PCI host controller
[    4.735769] usb usb5: Manufacturer: Linux 4.4.0-21-generic ohci_hcd
[    4.735771] usb usb5: SerialNumber: 0000:00:14.5
[    4.735992] hub 5-0:1.0: USB hub found
[    4.735999] hub 5-0:1.0: 2 ports detected
[    4.736093] ohci-platform: OHCI generic platform driver
[    4.736108] uhci_hcd: USB Universal Host Controller Interface driver
[    4.736257] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    4.736262] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[    4.736444] xhci_hcd 0000:00:10.0: hcc params 0x014042c3 hci version 0x96 quirks 0x00000608
[    4.736660] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    4.736662] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.736663] usb usb6: Product: xHCI Host Controller
[    4.736665] usb usb6: Manufacturer: Linux 4.4.0-21-generic xhci-hcd
[    4.736666] usb usb6: SerialNumber: 0000:00:10.0
[    4.736840] hub 6-0:1.0: USB hub found
[    4.736847] hub 6-0:1.0: 2 ports detected
[    4.736926] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    4.736929] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
[    4.739859] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.739873] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
[    4.739875] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.739876] usb usb7: Product: xHCI Host Controller
[    4.739877] usb usb7: Manufacturer: Linux 4.4.0-21-generic xhci-hcd
[    4.739879] usb usb7: SerialNumber: 0000:00:10.0
[    4.739990] hub 7-0:1.0: USB hub found
[    4.739997] hub 7-0:1.0: 2 ports detected
[    4.740144] xhci_hcd 0000:00:10.1: xHCI Host Controller
[    4.740148] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
[    4.740324] xhci_hcd 0000:00:10.1: hcc params 0x014042c3 hci version 0x96 quirks 0x00000608
[    4.740515] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[    4.740517] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.740518] usb usb8: Product: xHCI Host Controller
[    4.740520] usb usb8: Manufacturer: Linux 4.4.0-21-generic xhci-hcd
[    4.740521] usb usb8: SerialNumber: 0000:00:10.1
[    4.740691] hub 8-0:1.0: USB hub found
[    4.740697] hub 8-0:1.0: 2 ports detected
[    4.740769] xhci_hcd 0000:00:10.1: xHCI Host Controller
[    4.740773] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9
[    4.743746] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.743766] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[    4.743767] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.743768] usb usb9: Product: xHCI Host Controller
[    4.743770] usb usb9: Manufacturer: Linux 4.4.0-21-generic xhci-hcd
[    4.743772] usb usb9: SerialNumber: 0000:00:10.1
[    4.743900] hub 9-0:1.0: USB hub found
[    4.743907] hub 9-0:1.0: 2 ports detected
[    4.744017] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    4.744018] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    4.744146] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.744333] mousedev: PS/2 mouse device common for all mice
[    4.744474] rtc_cmos 00:06: RTC can wake from S4
[    4.744577] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    4.744599] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    4.744606] i2c /dev entries driver
[    4.744658] device-mapper: uevent: version 1.0.3
[    4.744724] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    4.744737] ledtrig-cpu: registered to indicate activity on CPUs
[    4.744740] EFI Variables Facility v0.08 2004-May-17
[    4.749912] NET: Registered protocol family 10
[    4.750169] NET: Registered protocol family 17
[    4.750183] Key type dns_resolver registered
[    4.750533] microcode: CPU0: patch_level=0x06001116
[    4.750539] microcode: CPU1: patch_level=0x06001116
[    4.750549] microcode: CPU2: patch_level=0x06001116
[    4.750558] microcode: CPU3: patch_level=0x06001116
[    4.750596] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    4.750752] registered taskstats version 1
[    4.750766] Loading compiled-in X.509 certificates
[    4.751526] Loaded X.509 cert 'Build time autogenerated kernel key: fc7c0e9f152f32eca50ea2d9722926e5127af244'
[    4.751541] zswap: loaded using pool lzo/zbud
[    4.753288] Key type trusted registered
[    4.756664] Key type encrypted registered
[    4.756676] AppArmor: AppArmor sha1 policy hashing enabled
[    4.756679] ima: No TPM chip found, activating TPM-bypass!
[    4.756710] evm: HMAC attrs: 0x1
[    4.756991]   Magic number: 8:111:441
[    4.757080] rtc_cmos 00:06: setting system clock to 2016-11-12 17:24:49 UTC (1478971489)
[    4.757232] acpi-cpufreq: overriding BIOS provided _PSD data
[    4.757371] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.757372] EDD information not available.
[    4.757436] PM: Hibernation image not present or could not be loaded.
[    4.758571] Freeing unused kernel memory: 1476K (ffffffff81f41000 - ffffffff820b2000)
[    4.758572] Write protecting the kernel read-only data: 14336k
[    4.759316] Freeing unused kernel memory: 1872K (ffff88000182c000 - ffff880001a00000)
[    4.759763] Freeing unused kernel memory: 176K (ffff880001dd4000 - ffff880001e00000)
[    4.772710] random: systemd-udevd urandom read with 5 bits of entropy available
[    4.797663] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    4.807012] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.807481] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000063a000, 90:2b:34:a9:b2:a2, XID 0c900800 IRQ 37
[    4.807483] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    4.809030] [drm] Initialized drm 1.1.0 20060810
[    4.812098] ahci 0000:00:11.0: version 3.0
[    4.812290] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
[    4.812294] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    4.812299] ahci 0000:00:11.0: both AHCI_HFLAG_MULTI_MSI flag set 				 and custom irq handler implemented
[    4.812676] scsi host0: ahci
[    4.812805] scsi host1: ahci
[    4.812890] ata1: DUMMY
[    4.812893] ata2: SATA max UDMA/133 abar m2048@0xfe10d000 port 0xfe10d180 irq 39
[    4.821244] wmi: Mapper loaded
[    4.832964] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    4.839678] checking generic (d1000000 1e0000) vs hw (c0000000 10000000)
[    4.839681] checking generic (d1000000 1e0000) vs hw (d0000000 2000000)
[    4.839683] fb: switching to nouveaufb from EFI VGA
[    4.839714] Console: switching to colour dummy device 80x25
[    4.839851] nouveau 0000:01:00.0: NVIDIA GT218 (0a8280b1)
[    4.965585] nouveau 0000:01:00.0: bios: version 70.18.5f.00.06
[    4.966754] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
[    5.051742] usb 8-1: new high-speed USB device number 2 using xhci_hcd
[    5.103666] usb 3-3: new low-speed USB device number 2 using ohci-pci
[    5.185133] usb 8-1: New USB device found, idVendor=0951, idProduct=1662
[    5.185136] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.185138] usb 8-1: Product: DataTraveler 109
[    5.185140] usb 8-1: Manufacturer: Kingston
[    5.185141] usb 8-1: SerialNumber: 6CF049E31FDEFC10C05A39AB
[    5.185272] usb 8-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[    5.185279] usb 8-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[    5.188525] usb-storage 8-1:1.0: USB Mass Storage device detected
[    5.188625] scsi host2: usb-storage 8-1:1.0
[    5.188701] usbcore: registered new interface driver usb-storage
[    5.189879] usbcore: registered new interface driver uas
[    5.272824] usb 3-3: New USB device found, idVendor=046d, idProduct=c517
[    5.272834] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.272837] usb 3-3: Product: USB Receiver
[    5.272839] usb 3-3: Manufacturer: Logitech
[    5.278731] hidraw: raw HID events driver (C) Jiri Kosina
[    5.292969] usbcore: registered new interface driver usbhid
[    5.292972] usbhid: USB HID core driver
[    5.295880] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:046D:C517.0001/input/input3
[    5.303764] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.304549] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:11.0 domain=0x0004 address=0x0000000000000000 flags=0x0020]
[    5.351911] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-3/input0
[    5.351932] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[    5.352606] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:046D:C517.0002/input/input4
[    5.408018] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-3/input1
[    5.499701] tsc: Refined TSC clocksource calibration: 3593.465 MHz
[    5.499706] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33cc35e9f63, max_idle_ns: 440795284315 ns
[    6.203538] scsi 2:0:0:0: Direct-Access     Kingston DataTraveler 109 1.00 PQ: 0 ANSI: 4
[    6.212184] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    6.212433] sd 2:0:0:0: [sda] 15638480 512-byte logical blocks: (8.01 GB/7.46 GiB)
[    6.212676] sd 2:0:0:0: [sda] Write Protect is off
[    6.212679] sd 2:0:0:0: [sda] Mode Sense: 45 00 00 00
[    6.212920] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    6.214578]  sda: sda1
[    6.215617] sd 2:0:0:0: [sda] Attached SCSI removable disk
[    6.263793] [TTM] Zone  kernel: Available graphics memory: 2038076 kiB
[    6.263795] [TTM] Initializing pool allocator
[    6.263799] [TTM] Initializing DMA pool allocator
[    6.263808] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[    6.263810] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    6.263813] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    6.263815] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    6.263817] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00020030
[    6.263819] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000
[    6.263821] nouveau 0000:01:00.0: DRM: DCB outp 02: 02011362 00020010
[    6.263822] nouveau 0000:01:00.0: DRM: DCB outp 03: 01022310 00000000
[    6.263824] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[    6.263825] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
[    6.263826] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
[    6.266076] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.266077] [drm] Driver supports precise vblank timestamp query.
[    6.281228] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[    6.378683] nouveau 0000:01:00.0: DRM: allocated 1920x1200 fb: 0x70000, bo ffff880138fb5c00
[    6.378840] fbcon: nouveaufb (fb0) is primary device
[    6.445991] Console: switching to colour frame buffer device 240x75
[    6.448673] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    6.459864] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    6.499981] clocksource: Switched to clocksource tsc
[   10.304104] ata2.00: qc timeout (cmd 0xec)
[   10.304113] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   10.796143] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   10.797019] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:11.0 domain=0x0004 address=0x0000000000000000 flags=0x0020]
[   20.796786] ata2.00: qc timeout (cmd 0xec)
[   20.796795] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   20.796798] ata2: limiting SATA link speed to 1.5 Gbps
[   21.288827] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   21.289673] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:11.0 domain=0x0004 address=0x0000000000000000 flags=0x0020]
[   33.605285] random: nonblocking pool is initialized
[   51.290772] ata2.00: qc timeout (cmd 0xec)
[   51.290782] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   51.782821] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   53.932023] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   60.476959] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   60.477104] systemd[1]: Detected architecture x86-64.
[   60.477263] systemd[1]: Set hostname to <ubuntu>.
[   60.477406] systemd[1]: Initializing machine ID from random generator.
[   60.635185] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   60.635260] systemd[1]: Listening on udev Control Socket.
[   60.635298] systemd[1]: Listening on LVM2 metadata daemon socket.
[   60.635306] systemd[1]: Reached target User and Group Name Lookups.
[   60.635408] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   60.635439] systemd[1]: Listening on Journal Socket (/dev/log).
[   60.635447] systemd[1]: Reached target Remote File Systems (Pre).
[   60.635455] systemd[1]: Reached target Swap.
[   60.635489] systemd[1]: Listening on udev Kernel Socket.
[   60.635591] systemd[1]: Created slice User and Session Slice.
[   60.635620] systemd[1]: Listening on Syslog Socket.
[   60.635651] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   60.635660] systemd[1]: Reached target Remote File Systems.
[   60.635731] systemd[1]: Created slice System Slice.
[   60.635745] systemd[1]: Reached target Slices.
[   60.635753] systemd[1]: Reached target Encrypted Volumes.
[   60.635781] systemd[1]: Listening on Journal Socket.
[   60.655548] systemd[1]: Starting Braille Device Support...
[   60.664450] systemd[1]: Starting Load Kernel Modules...
[   60.664943] systemd[1]: Mounting Debug File System...
[   60.691095] systemd[1]: Started Read required files in advance.
[   60.691940] systemd[1]: Starting Uncomplicated firewall...
[   60.693194] systemd[1]: Mounting POSIX Message Queue File System...
[   60.694203] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   60.694396] systemd[1]: Created slice system-getty.slice.
[   60.694508] systemd[1]: Listening on Journal Audit Socket.
[   60.695506] systemd[1]: Starting Journal Service...
[   60.696115] systemd[1]: Mounting Huge Pages File System...
[   60.696837] systemd[1]: Starting Remount Root and Kernel File Systems...
[   60.696931] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   60.697624] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   60.697678] systemd[1]: Listening on LVM2 poll daemon socket.
[   60.699733] systemd[1]: Mounted Debug File System.
[   60.699824] systemd[1]: Mounted POSIX Message Queue File System.
[   60.699866] systemd[1]: Mounted Huge Pages File System.
[   60.704262] systemd[1]: Started Braille Device Support.
[   60.715332] systemd[1]: Started Uncomplicated firewall.
[   60.743366] systemd[1]: Started Remount Root and Kernel File Systems.
[   60.763627] systemd[1]: Starting udev Coldplug all Devices...
[   60.764219] systemd[1]: Starting Load/Save Random Seed...
[   60.767117] systemd[1]: Started Load/Save Random Seed.
[   60.791085] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   60.791848] systemd[1]: Starting Create Static Device Nodes in /dev...
[   60.886690] systemd[1]: Started Create Static Device Nodes in /dev.
[   60.903654] systemd[1]: Starting udev Kernel Device Manager...
[   60.942264] systemd[1]: Started Journal Service.
[   61.015790] lp: driver loaded but no devices found
[   61.018582] systemd-journald[914]: Received request to flush runtime journal from PID 1
[   61.029153] ppdev: user-space parallel port driver
[   61.048512] parport_pc 00:05: reported by Plug and Play ACPI
[   61.048578] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   61.143445] lp0: using parport0 (interrupt-driven).
[   61.188878] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   61.197402] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   61.197533] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[   61.390033] AVX version of gcm_enc/dec engaged.
[   61.390036] AES CTR mode by8 optimization enabled
[   61.485352] kvm: Nested Virtualization enabled
[   61.485356] kvm: Nested Paging enabled
[   61.499664] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[   61.499671] snd_hda_intel 0000:01:00.1: Disabling MSI
[   61.499678] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   61.525303] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   61.525307] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   61.525309] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   61.525311] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   61.525315] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
[   61.525317] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   61.525319] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   61.525320] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   61.525322] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   61.525323] snd_hda_codec_realtek hdaudioC0D0:      CD=0x1c
[   61.537950] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[   61.538039] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[   61.538118] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[   61.538203] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[   62.376074] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
[   62.376225] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
[   62.376345] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[   62.376431] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
[   63.610989] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   63.721644] r8169 0000:02:00.0 enp2s0: link down
[   63.721703] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[  547.622397] r8169 0000:02:00.0 enp2s0: link up
[  547.622408] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready

Dernière modification par Eikasia (Le 12/11/2016, à 21:02)

---

Ubuntu 14.04 LTS (64 bits) :  boîtier, Textorm 69U6 ; alim, LDLC BG-400 Quality Select 80PLUS Bronze ; cm, Gigabyte GA-F2A75M-D3H ; proc, AMD A8-5600K (3.6 GHz) B E ; ram, Kingston HyperX 4 Go (2x 2Go) DDR3 1600 MHz ; cg, ASUS 210-1GD3-L 1 GB ; dd, Seagate Barracuda 7200.14 SATA 6Gb/s 1 To ; dd, Seagate ST3250624AS ; impri/scan HP PSC 1510.
Ubuntu 12.04 LTS (32 bits) : portable ASUS K53E-SX1254V.

Eikasia

Re : [Résolu] Installation ubuntu : live usb ne trouve pas le disque dur

Re bonsoir,

Je viens de faire plusieurs essais, avec et sans live usb.

Sans live usb, j'ai un message d'erreur grub rescue. Quand je vais dans le bios, le hdd est bien détecté en sata 1.

Quand je démarrage le live usb, pas de problème. Mais le disque dur n'est pas détecté. J'ai fait un sudo umount -a puis sudo mount /dev/sda1 /mnt. Le terminal me répond :

 mount : dev/sda1 is already mounted or /mnt busy
/dev/sda1 is already mounted on /cdrom 

Or quand je fais un sudo fdisk -l, le sda1 correspond... à la clé usb... et il ne trouve pas d'autre disque dur.

---

Ubuntu 14.04 LTS (64 bits) :  boîtier, Textorm 69U6 ; alim, LDLC BG-400 Quality Select 80PLUS Bronze ; cm, Gigabyte GA-F2A75M-D3H ; proc, AMD A8-5600K (3.6 GHz) B E ; ram, Kingston HyperX 4 Go (2x 2Go) DDR3 1600 MHz ; cg, ASUS 210-1GD3-L 1 GB ; dd, Seagate Barracuda 7200.14 SATA 6Gb/s 1 To ; dd, Seagate ST3250624AS ; impri/scan HP PSC 1510.
Ubuntu 12.04 LTS (32 bits) : portable ASUS K53E-SX1254V.

Eikasia

Re : [Résolu] Installation ubuntu : live usb ne trouve pas le disque dur

Eureka ! Je crois avoir trouvé... à force de chercher sur les différents topics. Le problème viendrait du bios et du paramètre ACHI ou IDE du HDD. Désolé pour la formulation... je ne suis pas très au point sur le sujet. En passant en ide, cette fois le disque dur est détecté par le live usb. Et j'ai pu lancé l'installation. J'attends un peu... en espérant ne pas avoir de nouveaux problèmes.

Dans tous les cas, merci grandement pour votre aide !

---

Ubuntu 14.04 LTS (64 bits) :  boîtier, Textorm 69U6 ; alim, LDLC BG-400 Quality Select 80PLUS Bronze ; cm, Gigabyte GA-F2A75M-D3H ; proc, AMD A8-5600K (3.6 GHz) B E ; ram, Kingston HyperX 4 Go (2x 2Go) DDR3 1600 MHz ; cg, ASUS 210-1GD3-L 1 GB ; dd, Seagate Barracuda 7200.14 SATA 6Gb/s 1 To ; dd, Seagate ST3250624AS ; impri/scan HP PSC 1510.
Ubuntu 12.04 LTS (32 bits) : portable ASUS K53E-SX1254V.