Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 23/11/2016, à 16:10

chafoin

HELP ! problèmes multiples (démarrage/ extinction/ imprimantes/ maj)

Bonjour,

je demande l'aide de personnes expérimentées pour m'aider. Je suis sous ubuntu 14.04 LTS sur un pc de moins de 2 ans.
J'aime le principe de linux mais je suis vite démuni en cas de problème.

Depuis plusieurs semaines, les problèmes se multiplient ...
  - Au démarrage, il faut aujourd'hui près de 45 mn à l'ordi pour se lancer, contre 7 seconde au début (disque dur ssd)
-  Pour l'éteindre, cela dure plusieurs heures, je l'éteins donc manuellement
-  Imprimante multifonctions : je ne peux plus lancer d'impression, l'imprimante apparaît déconnectée alors que rien n'a changée dans la configuration des branchements. Les autres fonctions (scan et photocopie) fonctionnent.
-  Mise à jour : parfois ça fonctionne, parfois, un message apparaît m'informant que le téléchargement des dépôts a échoué, problème de connexion internet

Merci d'avance pour votre aide,

Namasté

Hors ligne

#2 Le 23/11/2016, à 16:42

Bougron

Re : HELP ! problèmes multiples (démarrage/ extinction/ imprimantes/ maj)

Bonjour
Tu as recensé quatre problèmes. Impossible de savoir à ce niveau s'ils  sont liés.
D' habitude,  je demande une trace de la mise en route. Mais je crains que le fichier soit très volumineux.
Il faudrait déjà que tu indiques la référence exacte de ton ordinateur et tout spécialement de la carte  graphique car un temps de démarrage de 45 minutes ne m'est pas inconnu.

A)   As-tu pensé à mettre ubuntu  bien à jour.

sudo apt update
sudo apt upgrade

B)  Donnes la trace des 500 derniers événements   en copier/coller et mise en forme avec le 11eme icône de cette grille de saisie <>

dmesg  | tail -500

C) Idem pour le début 

dmesg  | head -1200  |  tail -500

Il est possible que je redemande en changeant les chiffres

D) Pour l'imprimante, je ne sais pas si je vais mettre le bon mot

dmesg |   grep printer

Dernière modification par Bougron (Le 23/11/2016, à 16:43)

Hors ligne

#3 Le 23/11/2016, à 17:26

chafoin

Re : HELP ! problèmes multiples (démarrage/ extinction/ imprimantes/ maj)

Bonjour bougron,

Merci pour ta réponse rapide, alors voilà :

Pour mon pc :

utilisateur@PCI3:~$ lshw
ATTENTION: ce programme devrait être lancé en tant que super-utilisateur.
pci3                      
    description: Computer
    bits: 32 bits
  *-core
       description: Motherboard
       identifiant matériel: 0
     *-memory
          description: Mémoire système
          identifiant matériel: 0
          taille: 3907MiB
     *-cpu
          produit: Intel(R) Core(TM) i3-4150 CPU @ 3.50GHz
          fabriquant: Intel Corp.
          identifiant matériel: 1
          information bus: cpu@0
          version: 6.12.3
          numéro de série: 0003-06C3-0000-0000-0000-0000
          taille: 800MHz
          capacité: 800MHz
          bits: 64 bits
          fonctionnalités: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx pdpe1gb rdtscp x86-64 constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm arat xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid cpufreq
          configuration: id=0
        *-logicalcpu:0
             description: CPU Logique
             identifiant matériel: 0.1
             bits: 64 bits
             fonctionnalités: logical
        *-logicalcpu:1
             description: CPU Logique
             identifiant matériel: 0.2
             bits: 64 bits
             fonctionnalités: logical
        *-logicalcpu:2
             description: CPU Logique
             identifiant matériel: 0.3
             bits: 64 bits
             fonctionnalités: logical
        *-logicalcpu:3
             description: CPU Logique
             identifiant matériel: 0.4
             bits: 64 bits
             fonctionnalités: logical
        *-logicalcpu:4
             description: CPU Logique
             identifiant matériel: 0.5
             bits: 64 bits
             fonctionnalités: logical
        *-logicalcpu:5
             description: CPU Logique
             identifiant matériel: 0.6
             bits: 64 bits
             fonctionnalités: logical
        *-logicalcpu:6
             description: CPU Logique
             identifiant matériel: 0.7
             bits: 64 bits
             fonctionnalités: logical
        *-logicalcpu:7
             description: CPU Logique
             identifiant matériel: 0.8
             bits: 64 bits
             fonctionnalités: logical
        *-logicalcpu:8
             description: CPU Logique
             identifiant matériel: 0.9
             bits: 64 bits
             fonctionnalités: logical
        *-logicalcpu:9
             description: CPU Logique
             identifiant matériel: 0.a
             bits: 64 bits
             fonctionnalités: logical
        *-logicalcpu:10
             description: CPU Logique
             identifiant matériel: 0.b
             bits: 64 bits
             fonctionnalités: logical
        *-logicalcpu:11
             description: CPU Logique
             identifiant matériel: 0.c
             bits: 64 bits
             fonctionnalités: logical
        *-logicalcpu:12
             description: CPU Logique
             identifiant matériel: 0.d
             bits: 64 bits
             fonctionnalités: logical
        *-logicalcpu:13
             description: CPU Logique
             identifiant matériel: 0.e
             bits: 64 bits
             fonctionnalités: logical
        *-logicalcpu:14
             description: CPU Logique
             identifiant matériel: 0.f
             bits: 64 bits
             fonctionnalités: logical
        *-logicalcpu:15
             description: CPU Logique
             identifiant matériel: 0.10
             bits: 64 bits
             fonctionnalités: logical
     *-pci
          description: Host bridge
          produit: 4th Gen Core Processor DRAM Controller
          fabriquant: Intel Corporation
          identifiant matériel: 100
          information bus: pci@0000:00:00.0
          version: 06
          bits: 32 bits
          horloge: 33MHz
        *-pci:0
             description: PCI bridge
             produit: Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller
             fabriquant: Intel Corporation
             identifiant matériel: 1
             information bus: pci@0000:00:01.0
             version: 06
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:40
        *-display
             description: VGA compatible controller
             produit: 4th Generation Core Processor Family Integrated Graphics Controller
             fabriquant: Intel Corporation
             identifiant matériel: 2
             information bus: pci@0000:00:02.0
             version: 06
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: vga_controller bus_master cap_list rom
             configuration: driver=i915 latency=0
             ressources: irq:50 mémoire:f7800000-f7bfffff mémoire:e0000000-efffffff portE/S:f000(taille=64)
        *-multimedia:0
             description: Audio device
             produit: Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller
             fabriquant: Intel Corporation
             identifiant matériel: 3
             information bus: pci@0000:00:03.0
             version: 06
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: bus_master cap_list
             configuration: driver=snd_hda_intel latency=0
             ressources: irq:52 mémoire:f7e14000-f7e17fff
        *-usb:0
             description: USB controller
             produit: 9 Series Chipset Family USB xHCI Controller
             fabriquant: Intel Corporation
             identifiant matériel: 14
             information bus: pci@0000:00:14.0
             version: 00
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: xhci bus_master cap_list
             configuration: driver=xhci_hcd latency=0
             ressources: irq:41 mémoire:f7e00000-f7e0ffff
        *-communication
             description: Communication controller
             produit: 9 Series Chipset Family ME Interface #1
             fabriquant: Intel Corporation
             identifiant matériel: 16
             information bus: pci@0000:00:16.0
             version: 00
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: bus_master cap_list
             configuration: driver=mei_me latency=0
             ressources: irq:49 mémoire:f7e1d000-f7e1d00f
        *-usb:1
             description: USB controller
             produit: 9 Series Chipset Family USB EHCI Controller #2
             fabriquant: Intel Corporation
             identifiant matériel: 1a
             information bus: pci@0000:00:1a.0
             version: 00
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: ehci bus_master cap_list
             configuration: driver=ehci-pci latency=0
             ressources: irq:16 mémoire:f7e1b000-f7e1b3ff
        *-multimedia:1
             description: Audio device
             produit: 9 Series Chipset Family HD Audio Controller
             fabriquant: Intel Corporation
             identifiant matériel: 1b
             information bus: pci@0000:00:1b.0
             version: 00
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: bus_master cap_list
             configuration: driver=snd_hda_intel latency=0
             ressources: irq:51 mémoire:f7e10000-f7e13fff
        *-pci:1
             description: PCI bridge
             produit: 9 Series Chipset Family PCI Express Root Port 1
             fabriquant: Intel Corporation
             identifiant matériel: 1c
             information bus: pci@0000:00:1c.0
             version: d0
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:16 portE/S:2000(taille=4096) mémoire:df200000-df3fffff portE/S:df400000(taille=2097152)
        *-pci:2
             description: PCI bridge
             produit: 9 Series Chipset Family PCI Express Root Port 3
             fabriquant: Intel Corporation
             identifiant matériel: 1c.2
             information bus: pci@0000:00:1c.2
             version: d0
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:18 portE/S:e000(taille=4096) mémoire:f7d00000-f7dfffff portE/S:f0000000(taille=1048576)
           *-network
                description: Ethernet interface
                produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
                fabriquant: Realtek Semiconductor Co., Ltd.
                identifiant matériel: 0
                information bus: pci@0000:03:00.0
                nom logique: eth1
                version: 0c
                numéro de série: 44:8a:5b:cf:8b:28
                taille: 100Mbit/s
                capacité: 1Gbit/s
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168g-2_0.0.1 02/06/13 ip=192.168.0.11 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
                ressources: irq:48 portE/S:e000(taille=256) mémoire:f7d00000-f7d00fff mémoire:f0000000-f0003fff
        *-pci:3
             description: PCI bridge
             produit: 82801 PCI Bridge
             fabriquant: Intel Corporation
             identifiant matériel: 1c.3
             information bus: pci@0000:00:1c.3
             version: d0
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci subtractive_decode bus_master cap_list
           *-pci
                description: PCI bridge
                produit: ASM1083/1085 PCIe to PCI Bridge
                fabriquant: ASMedia Technology Inc.
                identifiant matériel: 0
                information bus: pci@0000:04:00.0
                version: 03
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pci normal_decode bus_master cap_list
                ressources: mémoireE/S:202001f10-202001f0f
        *-pci:4
             description: PCI bridge
             produit: 9 Series Chipset Family PCI Express Root Port 6
             fabriquant: Intel Corporation
             identifiant matériel: 1c.5
             information bus: pci@0000:00:1c.5
             version: d0
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:17 mémoire:f7c00000-f7cfffff
           *-usb
                description: USB controller
                produit: uPD720202 USB 3.0 Host Controller
                fabriquant: Renesas Technology Corp.
                identifiant matériel: 0
                information bus: pci@0000:06:00.0
                version: 02
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: xhci bus_master cap_list
                configuration: driver=xhci_hcd latency=0
                ressources: irq:17 mémoire:f7c00000-f7c01fff
        *-usb:2
             description: USB controller
             produit: 9 Series Chipset Family USB EHCI Controller #1
             fabriquant: Intel Corporation
             identifiant matériel: 1d
             information bus: pci@0000:00:1d.0
             version: 00
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: ehci bus_master cap_list
             configuration: driver=ehci-pci latency=0
             ressources: irq:23 mémoire:f7e1a000-f7e1a3ff
        *-isa
             description: ISA bridge
             produit: 9 Series Chipset Family H97 Controller
             fabriquant: Intel Corporation
             identifiant matériel: 1f
             information bus: pci@0000:00:1f.0
             version: 00
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: isa bus_master cap_list
             configuration: latency=0
        *-storage
             description: SATA controller
             produit: 9 Series Chipset Family SATA Controller [AHCI Mode]
             fabriquant: Intel Corporation
             identifiant matériel: 1f.2
             information bus: pci@0000:00:1f.2
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: storage ahci_1.0 bus_master cap_list
             configuration: driver=ahci latency=0
             ressources: irq:47 portE/S:f0b0(taille=8) portE/S:f0a0(taille=4) portE/S:f090(taille=8) portE/S:f080(taille=4) portE/S:f060(taille=32) mémoire:f7e19000-f7e197ff
        *-serial NON-RÉCLAMÉ
             description: SMBus
             produit: 9 Series Chipset Family SMBus Controller
             fabriquant: Intel Corporation
             identifiant matériel: 1f.3
             information bus: pci@0000:00:1f.3
             version: 00
             bits: 64 bits
             horloge: 33MHz
             configuration: latency=0
             ressources: mémoire:f7e18000-f7e180ff portE/S:f040(taille=32)
ATTENTION: les informations sont potentiellement incomplètes ou erronées, vous devriez lancer ce programme en tant que super-utilisateur.
utilisateur@PCI3:~$

Ensuite,

A)   As-tu pensé à mettre ubuntu  bien à jour.

sudo apt update
sudo apt upgrade
utilisateur@PCI3:~$ sudo apt update
[sudo] password for utilisateur: 
Ign http://extras.ubuntu.com trusty InRelease
Ign http://archive.canonical.com trusty InRelease                              
Ign http://fr.archive.ubuntu.com trusty InRelease                              
Atteint http://download.mono-project.com wheezy-apache24-compat InRelease      
Réception de : 1 http://extras.ubuntu.com trusty Release.gpg [72 B]            
Atteint http://archive.canonical.com trusty Release.gpg                        
Réception de : 2 http://fr.archive.ubuntu.com trusty-updates InRelease [65,9 kB]
Atteint http://extras.ubuntu.com trusty Release                                
Atteint http://archive.canonical.com trusty Release                            
Atteint http://download.mono-project.com wheezy-apache24-compat/main i386 Packages
Ign http://dl.google.com stable InRelease                                      
Atteint http://extras.ubuntu.com trusty/main Sources                           
Atteint http://archive.canonical.com trusty/partner Sources                    
Ign http://dl.google.com stable InRelease                                      
Atteint http://extras.ubuntu.com trusty/main i386 Packages                     
Atteint http://archive.canonical.com trusty/partner i386 Packages              
Atteint http://dl.google.com stable Release.gpg                                
Atteint http://archive.canonical.com trusty/partner Translation-en             
Atteint http://dl.google.com stable Release.gpg                                
Atteint http://dl.google.com stable Release                                    
Atteint http://dl.google.com stable Release                                    
Atteint http://fr.archive.ubuntu.com trusty-backports InRelease                
Atteint http://dl.google.com stable/main i386 Packages                         
Réception de : 3 http://fr.archive.ubuntu.com trusty-security InRelease [65,9 kB]
Ign https://private-ppa.launchpad.net trusty InRelease                         
Ign https://private-ppa.launchpad.net trusty/main i386 Packages/DiffIndex      
Atteint http://fr.archive.ubuntu.com trusty Release.gpg                        
Réception de : 4 http://fr.archive.ubuntu.com trusty-updates/main Sources [385 kB]
Ign http://extras.ubuntu.com trusty/main Translation-fr_FR                     
Ign http://extras.ubuntu.com trusty/main Translation-fr                        
Ign http://extras.ubuntu.com trusty/main Translation-en                        
Atteint https://private-ppa.launchpad.net trusty/main Translation-en           
Ign http://dl.google.com stable/main Translation-fr_FR                         
Atteint https://private-ppa.launchpad.net trusty/main i386 Packages            
Ign http://dl.google.com stable/main Translation-fr                            
Ign http://dl.google.com stable/main Translation-en                 
Ign https://private-ppa.launchpad.net trusty/main Translation-fr_FR 
Ign http://download.mono-project.com wheezy-apache24-compat/main Translation-fr_FR
Ign https://private-ppa.launchpad.net trusty/main Translation-fr    
Ign http://download.mono-project.com wheezy-apache24-compat/main Translation-fr
Ign http://download.mono-project.com wheezy-apache24-compat/main Translation-en
Réception de : 5 http://fr.archive.ubuntu.com trusty-updates/restricted Sources [5 888 B]
Réception de : 6 http://fr.archive.ubuntu.com trusty-updates/universe Sources [169 kB]
Réception de : 7 http://fr.archive.ubuntu.com trusty-updates/multiverse Sources [7 522 B]
Réception de : 8 http://fr.archive.ubuntu.com trusty-updates/main i386 Packages [879 kB]
Réception de : 9 http://fr.archive.ubuntu.com trusty-updates/restricted i386 Packages [16,2 kB]
Réception de : 10 http://fr.archive.ubuntu.com trusty-updates/universe i386 Packages [389 kB]
Réception de : 11 http://fr.archive.ubuntu.com trusty-updates/multiverse i386 Packages [14,5 kB]
Réception de : 12 http://fr.archive.ubuntu.com trusty-updates/main Translation-en [445 kB]
Réception de : 13 http://fr.archive.ubuntu.com trusty-updates/multiverse Translation-en [7 340 B]
Réception de : 14 http://fr.archive.ubuntu.com trusty-updates/restricted Translation-en [3 842 B]
Réception de : 15 http://fr.archive.ubuntu.com trusty-updates/universe Translation-en [205 kB]
Atteint http://fr.archive.ubuntu.com trusty-backports/main Sources             
Atteint http://fr.archive.ubuntu.com trusty-backports/restricted Sources       
Atteint http://fr.archive.ubuntu.com trusty-backports/universe Sources         
Atteint http://fr.archive.ubuntu.com trusty-backports/multiverse Sources       
Atteint http://fr.archive.ubuntu.com trusty-backports/main i386 Packages       
Atteint http://fr.archive.ubuntu.com trusty-backports/restricted i386 Packages 
Atteint http://fr.archive.ubuntu.com trusty-backports/universe i386 Packages   
Atteint http://fr.archive.ubuntu.com trusty-backports/multiverse i386 Packages 
Atteint http://fr.archive.ubuntu.com trusty-backports/main Translation-en      
Atteint http://fr.archive.ubuntu.com trusty-backports/multiverse Translation-en
Atteint http://fr.archive.ubuntu.com trusty-backports/restricted Translation-en
Atteint http://fr.archive.ubuntu.com trusty-backports/universe Translation-en  
Réception de : 16 http://fr.archive.ubuntu.com trusty-security/main Sources [122 kB]
Réception de : 17 http://fr.archive.ubuntu.com trusty-security/restricted Sources [4 613 B]
Réception de : 18 http://fr.archive.ubuntu.com trusty-security/universe Sources [45,8 kB]
Réception de : 19 http://fr.archive.ubuntu.com trusty-security/multiverse Sources [3 207 B]
Réception de : 20 http://fr.archive.ubuntu.com trusty-security/main i386 Packages [515 kB]
Réception de : 21 http://fr.archive.ubuntu.com trusty-security/restricted i386 Packages [13,1 kB]
Réception de : 22 http://fr.archive.ubuntu.com trusty-security/universe i386 Packages [144 kB]
Réception de : 23 http://fr.archive.ubuntu.com trusty-security/multiverse i386 Packages [4 289 B]
Réception de : 24 http://fr.archive.ubuntu.com trusty-security/main Translation-en [303 kB]
Réception de : 25 http://fr.archive.ubuntu.com trusty-security/multiverse Translation-en [2 201 B]
Réception de : 26 http://fr.archive.ubuntu.com trusty-security/restricted Translation-en [3 349 B]
Réception de : 27 http://fr.archive.ubuntu.com trusty-security/universe Translation-en [85,0 kB]
Atteint http://fr.archive.ubuntu.com trusty Release                            
Atteint http://fr.archive.ubuntu.com trusty/main Sources                       
Atteint http://fr.archive.ubuntu.com trusty/restricted Sources                 
Atteint http://fr.archive.ubuntu.com trusty/universe Sources                   
Atteint http://fr.archive.ubuntu.com trusty/multiverse Sources                 
Atteint http://fr.archive.ubuntu.com trusty/main i386 Packages                 
Atteint http://fr.archive.ubuntu.com trusty/restricted i386 Packages           
Atteint http://fr.archive.ubuntu.com trusty/universe i386 Packages             
Atteint http://fr.archive.ubuntu.com trusty/multiverse i386 Packages           
Atteint http://fr.archive.ubuntu.com trusty/main Translation-fr                
Atteint http://fr.archive.ubuntu.com trusty/main Translation-en                
Atteint http://fr.archive.ubuntu.com trusty/multiverse Translation-fr          
Atteint http://fr.archive.ubuntu.com trusty/multiverse Translation-en          
Atteint http://fr.archive.ubuntu.com trusty/restricted Translation-fr          
Atteint http://fr.archive.ubuntu.com trusty/restricted Translation-en          
Atteint http://fr.archive.ubuntu.com trusty/universe Translation-fr            
Atteint http://fr.archive.ubuntu.com trusty/universe Translation-en            
Ign http://fr.archive.ubuntu.com trusty/main Translation-fr_FR                 
Ign http://fr.archive.ubuntu.com trusty/multiverse Translation-fr_FR           
Ign http://fr.archive.ubuntu.com trusty/restricted Translation-fr_FR           
Ign http://fr.archive.ubuntu.com trusty/universe Translation-fr_FR             
3 921 ko réceptionnés en 59s (65,9 ko/s)                                       
W: Aucune clé publique n'est disponible pour la/les clé(s) suivante(s) :
1397BC53640DB551
W: Aucune clé publique n'est disponible pour la/les clé(s) suivante(s) :
1397BC53640DB551
W: Erreur de GPG : https://private-ppa.launchpad.net trusty InRelease : Les signatures suivantes n'ont pas pu être vérifiées car la clé publique n'est pas disponible : NO_PUBKEY E131728675254D99
W: Impossible de récupérer http://dl.google.com/linux/chrome/deb/dists/stable/Release  Impossible de trouver l'entrée « main/binary-i386/Packages » attendue dans le fichier « Release » : ligne non valable dans sources.list ou fichier corrompu

E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
utilisateur@PCI3:~$

et

utilisateur@PCI3:~$ sudo apt upgrade
[sudo] password for utilisateur: 
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Calcul de la mise à jour... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  libhdb9-heimdal libkdc2-heimdal linux-headers-3.13.0-24
  linux-headers-3.13.0-24-generic linux-image-3.13.0-24-generic
  linux-image-extra-3.13.0-24-generic
Veuillez utiliser « apt-get autoremove » pour les supprimer.
Les paquets suivants seront mis à jour :
  gir1.2-gtk-3.0 libgail-3-0 libgtk-3-0 libgtk-3-bin libgtk-3-common
  libmm-glib0 libnautilus-extension1a modemmanager nautilus nautilus-data
  oneconf oneconf-common python-oneconf python3-oneconf
14 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 3 541 ko dans les archives.
Après cette opération, 111 ko d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] o
Réception de : 1 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main libgtk-3-common all 3.10.8-0ubuntu1.6 [167 kB]
Réception de : 2 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main libgail-3-0 i386 3.10.8-0ubuntu1.6 [20,1 kB]
Réception de : 3 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main libgtk-3-0 i386 3.10.8-0ubuntu1.6 [1 923 kB]
Réception de : 4 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main libmm-glib0 i386 1.0.0-2ubuntu1.1 [127 kB]
Réception de : 5 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main gir1.2-gtk-3.0 i386 3.10.8-0ubuntu1.6 [174 kB]
Réception de : 6 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main libgtk-3-bin i386 3.10.8-0ubuntu1.6 [18,0 kB]
Réception de : 7 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main libnautilus-extension1a i386 1:3.10.1-0ubuntu9.11 [51,9 kB]
Réception de : 8 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main modemmanager i386 1.0.0-2ubuntu1.1 [473 kB]
Réception de : 9 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main nautilus-data all 1:3.10.1-0ubuntu9.11 [50,7 kB]
Réception de : 10 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main nautilus i386 1:3.10.1-0ubuntu9.11 [485 kB]
Réception de : 11 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main oneconf-common all 0.3.7.14.04.1 [6 042 B]
Réception de : 12 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main python3-oneconf all 0.3.7.14.04.1 [19,5 kB]
Réception de : 13 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main oneconf all 0.3.7.14.04.1 [5 458 B]
Réception de : 14 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main python-oneconf all 0.3.7.14.04.1 [19,7 kB]
3 541 ko réceptionnés en 1min 12s (49,1 ko/s)                                  
(Lecture de la base de données... 1021210 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../libgtk-3-common_3.10.8-0ubuntu1.6_all.deb ...
Dépaquetage de libgtk-3-common (3.10.8-0ubuntu1.6) sur (3.10.8-0ubuntu1.4) ...
Préparation du dépaquetage de .../libgail-3-0_3.10.8-0ubuntu1.6_i386.deb ...
Dépaquetage de libgail-3-0:i386 (3.10.8-0ubuntu1.6) sur (3.10.8-0ubuntu1.4) ...
Préparation du dépaquetage de .../libgtk-3-0_3.10.8-0ubuntu1.6_i386.deb ...
Dépaquetage de libgtk-3-0:i386 (3.10.8-0ubuntu1.6) sur (3.10.8-0ubuntu1.4) ...
Préparation du dépaquetage de .../libmm-glib0_1.0.0-2ubuntu1.1_i386.deb ...
Dépaquetage de libmm-glib0:i386 (1.0.0-2ubuntu1.1) sur (1.0.0-2ubuntu1) ...
Préparation du dépaquetage de .../gir1.2-gtk-3.0_3.10.8-0ubuntu1.6_i386.deb ...
Dépaquetage de gir1.2-gtk-3.0 (3.10.8-0ubuntu1.6) sur (3.10.8-0ubuntu1.4) ...
Préparation du dépaquetage de .../libgtk-3-bin_3.10.8-0ubuntu1.6_i386.deb ...
Conservation de « détournement de /usr/sbin/update-icon-caches en /usr/sbin/update-icon-caches.gtk2 par libgtk-3-bin »
Conservation de « détournement de /usr/share/man/man8/update-icon-caches.8.gz en /usr/share/man/man8/update-icon-caches.gtk2.8.gz par libgtk-3-bin »
Dépaquetage de libgtk-3-bin (3.10.8-0ubuntu1.6) sur (3.10.8-0ubuntu1.4) ...
Préparation du dépaquetage de .../libnautilus-extension1a_1%3a3.10.1-0ubuntu9.11_i386.deb ...
Dépaquetage de libnautilus-extension1a (1:3.10.1-0ubuntu9.11) sur (1:3.10.1-0ubuntu9.10) ...
Préparation du dépaquetage de .../modemmanager_1.0.0-2ubuntu1.1_i386.deb ...
modemmanager stop/waiting
Dépaquetage de modemmanager (1.0.0-2ubuntu1.1) sur (1.0.0-2ubuntu1) ...
Préparation du dépaquetage de .../nautilus-data_1%3a3.10.1-0ubuntu9.11_all.deb ...
Dépaquetage de nautilus-data (1:3.10.1-0ubuntu9.11) sur (1:3.10.1-0ubuntu9.10) ...
Préparation du dépaquetage de .../nautilus_1%3a3.10.1-0ubuntu9.11_i386.deb ...
Dépaquetage de nautilus (1:3.10.1-0ubuntu9.11) sur (1:3.10.1-0ubuntu9.10) ...
Préparation du dépaquetage de .../oneconf-common_0.3.7.14.04.1_all.deb ...
Dépaquetage de oneconf-common (0.3.7.14.04.1) sur (0.3.7) ...
Préparation du dépaquetage de .../python3-oneconf_0.3.7.14.04.1_all.deb ...
Dépaquetage de python3-oneconf (0.3.7.14.04.1) sur (0.3.7) ...
Préparation du dépaquetage de .../oneconf_0.3.7.14.04.1_all.deb ...
Dépaquetage de oneconf (0.3.7.14.04.1) sur (0.3.7) ...
Préparation du dépaquetage de .../python-oneconf_0.3.7.14.04.1_all.deb ...
Dépaquetage de python-oneconf (0.3.7.14.04.1) sur (0.3.7) ...
Traitement des actions différées (« triggers ») pour libglib2.0-0:i386 (2.40.2-0ubuntu1) ...
Traitement des actions différées (« triggers ») pour man-db (2.6.7.1-1ubuntu1) ...
Traitement des actions différées (« triggers ») pour hicolor-icon-theme (0.13-1) ...
Traitement des actions différées (« triggers ») pour ureadahead (0.100.0-16) ...
ureadahead will be reprofiled on next reboot
Traitement des actions différées (« triggers ») pour shared-mime-info (1.2-0ubuntu3) ...
Traitement des actions différées (« triggers ») pour gconf2 (3.2.6-0ubuntu2) ...
Traitement des actions différées (« triggers ») pour mime-support (3.54ubuntu1.1) ...
Traitement des actions différées (« triggers ») pour gnome-menus (3.10.1-0ubuntu2) ...
Traitement des actions différées (« triggers ») pour desktop-file-utils (0.22-1ubuntu1) ...
Traitement des actions différées (« triggers ») pour bamfdaemon (0.5.1+14.04.20140409-0ubuntu1) ...
Rebuilding /usr/share/applications/bamf-2.index...
Paramétrage de libgtk-3-common (3.10.8-0ubuntu1.6) ...
Paramétrage de libgtk-3-0:i386 (3.10.8-0ubuntu1.6) ...
Paramétrage de libgail-3-0:i386 (3.10.8-0ubuntu1.6) ...
Paramétrage de libmm-glib0:i386 (1.0.0-2ubuntu1.1) ...
Paramétrage de gir1.2-gtk-3.0 (3.10.8-0ubuntu1.6) ...
Paramétrage de libgtk-3-bin (3.10.8-0ubuntu1.6) ...
Paramétrage de libnautilus-extension1a (1:3.10.1-0ubuntu9.11) ...
Paramétrage de modemmanager (1.0.0-2ubuntu1.1) ...
modemmanager start/running, process 5411
Paramétrage de nautilus-data (1:3.10.1-0ubuntu9.11) ...
Paramétrage de nautilus (1:3.10.1-0ubuntu9.11) ...
Paramétrage de oneconf-common (0.3.7.14.04.1) ...
Paramétrage de python3-oneconf (0.3.7.14.04.1) ...
Paramétrage de oneconf (0.3.7.14.04.1) ...
Paramétrage de python-oneconf (0.3.7.14.04.1) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.19-0ubuntu6.9) ...
W: Duplicate sources.list entry http://download.mono-project.com/repo/debian/ wheezy-apache24-compat/main i386 Packages (/var/lib/apt/lists/download.mono-project.com_repo_debian_dists_wheezy-apache24-compat_main_binary-i386_Packages)
W: Duplicate sources.list entry http://download.mono-project.com/repo/debian/ wheezy-apache24-compat/main i386 Packages (/var/lib/apt/lists/download.mono-project.com_repo_debian_dists_wheezy-apache24-compat_main_binary-i386_Packages)
W: Duplicate sources.list entry http://download.mono-project.com/repo/debian/ wheezy-apache24-compat/main i386 Packages (/var/lib/apt/lists/download.mono-project.com_repo_debian_dists_wheezy-apache24-compat_main_binary-i386_Packages)
W: Vous pouvez lancer « apt-get update » pour corriger ces problèmes.
utilisateur@PCI3:~$ ^C
utilisateur@PCI3:~$

B)  Donnes la trace des 500 derniers événements   en copier/coller et mise en forme avec le 11eme icône de cette grille de saisie <>

dmesg  | tail -500
[    0.273564] PCI: CLS 64 bytes, default 64
[    0.273592] Trying to unpack rootfs image as initramfs...
[    0.476162] Freeing initrd memory: 18344K (f5c1c000 - f6e06000)
[    0.476312] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1a
[    0.476317] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1a
[    0.476321] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1a
[    0.476326] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1a
[    0.476359] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.476361] Scanning for low memory corruption every 60 seconds
[    0.476525] Initialise system trusted keyring
[    0.476548] audit: initializing netlink socket (disabled)
[    0.476555] type=2000 audit(1479908582.472:1): initialized
[    0.490595] bounce pool size: 64 pages
[    0.490601] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.491228] zbud: loaded
[    0.491268] VFS: Disk quotas dquot_6.5.2
[    0.491293] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.491512] fuse init (API version 7.22)
[    0.491553] msgmni has been set to 1668
[    0.491585] Key type big_key registered
[    0.491861] Key type asymmetric registered
[    0.491862] Asymmetric key parser 'x509' registered
[    0.491878] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.491900] io scheduler noop registered
[    0.491901] io scheduler deadline registered (default)
[    0.491917] io scheduler cfq registered
[    0.492035] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.492239] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.492246] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.492267] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[    0.492268] vesafb: scrolling: redraw
[    0.492269] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.494136] vesafb: framebuffer at 0xe0000000, mapped to 0xf8480000, using 5632k, total 5632k
[    0.497044] Console: switching to colour frame buffer device 200x56
[    0.499883] fb0: VESA VGA frame buffer device
[    0.499896] intel_idle: MWAIT substates: 0x42120
[    0.499897] intel_idle: v0.4 model 0x3C
[    0.499897] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.499965] ipmi message handler version 39.2
[    0.500012] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.500015] ACPI: Power Button [PWRB]
[    0.500033] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.500035] ACPI: Sleep Button [SLPB]
[    0.500052] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.500053] ACPI: Power Button [PWRF]
[    0.500092] ACPI: Fan [FAN0] (off)
[    0.500105] ACPI: Fan [FAN1] (off)
[    0.500117] ACPI: Fan [FAN2] (off)
[    0.500129] ACPI: Fan [FAN3] (off)
[    0.500141] ACPI: Fan [FAN4] (off)
[    0.500381] thermal LNXTHERM:00: registered as thermal_zone0
[    0.500383] ACPI: Thermal Zone [TZ00] (28 C)
[    0.500489] thermal LNXTHERM:01: registered as thermal_zone1
[    0.500490] ACPI: Thermal Zone [TZ01] (30 C)
[    0.500506] GHES: HEST is not enabled!
[    0.500555] isapnp: Scanning for PnP cards...
[    0.500563] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.520997] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.521839] Linux agpgart interface v0.103
[    0.522585] brd: module loaded
[    0.522968] loop: module loaded
[    0.523160] libphy: Fixed MDIO Bus: probed
[    0.523206] tun: Universal TUN/TAP device driver, 1.6
[    0.523207] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.523229] PPP generic driver version 2.4.2
[    0.523253] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.523255] ehci-pci: EHCI PCI platform driver
[    0.523327] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.523330] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.523340] ehci-pci 0000:00:1a.0: debug port 2
[    0.527248] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.527259] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e1b000
[    0.536982] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.537005] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.537006] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.537007] usb usb1: Product: EHCI Host Controller
[    0.537008] usb usb1: Manufacturer: Linux 3.13.0-101-generic ehci_hcd
[    0.537009] usb usb1: SerialNumber: 0000:00:1a.0
[    0.537070] hub 1-0:1.0: USB hub found
[    0.537073] hub 1-0:1.0: 2 ports detected
[    0.537187] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.537189] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.537199] ehci-pci 0000:00:1d.0: debug port 2
[    0.541092] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.541102] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1a000
[    0.553015] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.553040] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.553042] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.553043] usb usb2: Product: EHCI Host Controller
[    0.553044] usb usb2: Manufacturer: Linux 3.13.0-101-generic ehci_hcd
[    0.553044] usb usb2: SerialNumber: 0000:00:1d.0
[    0.553105] hub 2-0:1.0: USB hub found
[    0.553109] hub 2-0:1.0: 2 ports detected
[    0.553171] ehci-platform: EHCI generic platform driver
[    0.553175] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.553176] ohci-pci: OHCI PCI platform driver
[    0.553181] ohci-platform: OHCI generic platform driver
[    0.553184] uhci_hcd: USB Universal Host Controller Interface driver
[    0.553251] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.553254] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.554320] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.554334] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    0.554374] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.554375] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.554376] usb usb3: Product: xHCI Host Controller
[    0.554377] usb usb3: Manufacturer: Linux 3.13.0-101-generic xhci_hcd
[    0.554378] usb usb3: SerialNumber: 0000:00:14.0
[    0.554436] hub 3-0:1.0: USB hub found
[    0.554451] hub 3-0:1.0: 14 ports detected
[    0.556689] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.556691] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.556718] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.556719] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.556720] usb usb4: Product: xHCI Host Controller
[    0.556721] usb usb4: Manufacturer: Linux 3.13.0-101-generic xhci_hcd
[    0.556722] usb usb4: SerialNumber: 0000:00:14.0
[    0.556777] hub 4-0:1.0: USB hub found
[    0.556787] hub 4-0:1.0: 6 ports detected
[    0.812688] isapnp: No Plug & Play device found
[    0.845513] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    0.845517] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
[    0.849446] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.850789] xhci_hcd 0000:06:00.0: irq 42 for MSI/MSI-X
[    0.850793] xhci_hcd 0000:06:00.0: irq 43 for MSI/MSI-X
[    0.850796] xhci_hcd 0000:06:00.0: irq 44 for MSI/MSI-X
[    0.850799] xhci_hcd 0000:06:00.0: irq 45 for MSI/MSI-X
[    0.850802] xhci_hcd 0000:06:00.0: irq 46 for MSI/MSI-X
[    0.850881] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    0.850882] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.850883] usb usb5: Product: xHCI Host Controller
[    0.850884] usb usb5: Manufacturer: Linux 3.13.0-101-generic xhci_hcd
[    0.850885] usb usb5: SerialNumber: 0000:06:00.0
[    0.851015] hub 5-0:1.0: USB hub found
[    0.851021] hub 5-0:1.0: 2 ports detected
[    0.851062] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    0.851064] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
[    0.854311] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    0.854312] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.854313] usb usb6: Product: xHCI Host Controller
[    0.854314] usb usb6: Manufacturer: Linux 3.13.0-101-generic xhci_hcd
[    0.854315] usb usb6: SerialNumber: 0000:06:00.0
[    0.854444] hub 6-0:1.0: USB hub found
[    0.854451] hub 6-0:1.0: 2 ports detected
[    0.893569] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.895886] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.895891] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.896094] mousedev: PS/2 mouse device common for all mice
[    0.896443] rtc_cmos 00:06: RTC can wake from S4
[    0.896537] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.896561] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.896600] device-mapper: uevent: version 1.0.3
[    0.896637] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.896647] platform eisa.0: Probing EISA bus 0
[    0.896648] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.896649] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.896650] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.896651] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.896652] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.896653] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.896654] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.896655] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.896656] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.896657] platform eisa.0: EISA: Detected 0 cards
[    0.896660] cpufreq-nforce2: No nForce2 chipset.
[    0.896662] ledtrig-cpu: registered to indicate activity on CPUs
[    0.896733] TCP: cubic registered
[    0.896777] NET: Registered protocol family 10
[    0.896882] NET: Registered protocol family 17
[    0.896887] Key type dns_resolver registered
[    0.896998] Using IPI No-Shortcut mode
[    0.897058] Loading compiled-in X.509 certificates
[    0.898970] Loaded X.509 cert 'Magrathea: Glacier signing key: 72ec495539ad08c5f59ba7888fa74d487176abf5'
[    0.898977] registered taskstats version 1
[    0.900286] Key type trusted registered
[    0.902420] Key type encrypted registered
[    0.902423] AppArmor: AppArmor sha1 policy hashing enabled
[    0.902424] IMA: No TPM chip found, activating TPM-bypass!
[    0.902769] regulator-dummy: disabling
[    0.902821]   Magic number: 8:821:736
[    0.902890] rtc_cmos 00:06: setting system clock to 2016-11-23 13:43:03 UTC (1479908583)
[    0.903293] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.903294] EDD information not available.
[    0.903321] PM: Hibernation image not present or could not be loaded.
[    0.903460] Freeing unused kernel memory: 884K (c19c7000 - c1aa4000)
[    0.903487] Write protecting the kernel text: 6588k
[    0.903525] Write protecting the kernel read-only data: 2780k
[    0.903525] NX-protecting the kernel data: 5700k
[    0.910431] systemd-udevd[110]: starting version 204
[    0.935260] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.935269] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.935800] ahci 0000:00:1f.2: version 3.0
[    0.935887] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[    0.935932] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
[    0.935935] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
[    0.941972] r8169 0000:03:00.0: irq 48 for MSI/MSI-X
[    0.942124] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xf8428000, 44:8a:5b:cf:8b:28, XID 0c000800 IRQ 48
[    0.942126] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.949931] scsi0 : ahci
[    0.949983] scsi1 : ahci
[    0.950023] scsi2 : ahci
[    0.950062] scsi3 : ahci
[    0.950100] scsi4 : ahci
[    0.950156] scsi5 : ahci
[    0.950186] ata1: SATA max UDMA/133 abar m2048@0xf7e19000 port 0xf7e19100 irq 47
[    0.950188] ata2: SATA max UDMA/133 abar m2048@0xf7e19000 port 0xf7e19180 irq 47
[    0.950189] ata3: DUMMY
[    0.950190] ata4: DUMMY
[    0.950192] ata5: SATA max UDMA/133 abar m2048@0xf7e19000 port 0xf7e19300 irq 47
[    0.950193] ata6: DUMMY
[    0.981992] usb 1-1: New USB device found, idVendor=8087, idProduct=8009
[    0.981994] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.982262] hub 1-1:1.0: USB hub found
[    0.982366] hub 1-1:1.0: 6 ports detected
[    1.093828] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.226349] usb 2-1: New USB device found, idVendor=8087, idProduct=8001
[    1.226351] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.226600] hub 2-1:1.0: USB hub found
[    1.226723] hub 2-1:1.0: 8 ports detected
[    1.270084] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.270100] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.270115] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.270820] ata2.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133
[    1.270823] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.271550] ata2.00: configured for UDMA/133
[    1.272353] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[    1.272356] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node f34753d8), AE_NOT_FOUND (20131115/psparse-536)
[    1.272362] ata5.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB01, max UDMA/100
[    1.273493] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[    1.273497] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node f34753d8), AE_NOT_FOUND (20131115/psparse-536)
[    1.273502] ata5.00: configured for UDMA/100
[    1.285206] ata1.00: ATA-8: KINGSTON SV300S37A120G, 600ABBF0, max UDMA/133
[    1.285208] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.295358] ata1.00: configured for UDMA/133
[    1.295544] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 600A PQ: 0 ANSI: 5
[    1.295619] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.295631] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.295651] sd 0:0:0:0: [sda] Write Protect is off
[    1.295653] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.295664] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.295728] scsi 1:0:0:0: Direct-Access     ATA      ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
[    1.295831] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.295833] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.295854] sd 1:0:0:0: [sdb] Write Protect is off
[    1.295857] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.295859] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.295867] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.296066]  sda: sda1 sda2 < sda5 >
[    1.296349] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.297670] scsi 4:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224DB  SB01 PQ: 0 ANSI: 5
[    1.300622] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.300623] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.300704] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.300754] sr 4:0:0:0: Attached scsi generic sg2 type 5
[    1.341252]  sdb: sdb1
[    1.341360] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.375799] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    1.375801] EXT4-fs (sda1): write access will be enabled during recovery
[    1.439660] EXT4-fs (sda1): orphan cleanup on readonly fs
[    1.450322] usb 3-8: new full-speed USB device number 3 using xhci_hcd
[    1.457820] EXT4-fs (sda1): 31 orphan inodes deleted
[    1.457821] EXT4-fs (sda1): recovery complete
[    1.458994] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.468747] usb 3-8: New USB device found, idVendor=046d, idProduct=c52f
[    1.468761] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.468762] usb 3-8: Product: USB Receiver
[    1.468763] usb 3-8: Manufacturer: Logitech
[    1.474351] tsc: Refined TSC clocksource calibration: 3499.999 MHz
[    1.533751] random: init urandom read with 65 bits of entropy available
[    1.553508] init: plymouth-upstart-bridge main process (182) terminated with status 1
[    1.553517] init: plymouth-upstart-bridge main process ended, respawning
[    1.555380] init: plymouth-upstart-bridge main process (193) terminated with status 1
[    1.555387] init: plymouth-upstart-bridge main process ended, respawning
[    1.556906] init: plymouth-upstart-bridge main process (195) terminated with status 1
[    1.556914] init: plymouth-upstart-bridge main process ended, respawning
[    1.558642] init: plymouth-upstart-bridge main process (196) terminated with status 1
[    1.558651] init: plymouth-upstart-bridge main process ended, respawning
[    1.560561] init: plymouth-upstart-bridge main process (198) terminated with status 1
[    1.560571] init: plymouth-upstart-bridge main process ended, respawning
[    1.582513] usb 5-1: new low-speed USB device number 2 using xhci_hcd
[    1.634346] usb 5-1: New USB device found, idVendor=040b, idProduct=2000
[    1.634350] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.634352] usb 5-1: Product: USB Keyboard
[    1.634354] usb 5-1: Manufacturer: Generic
[    1.634426] usb 5-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
[    1.634430] usb 5-1: ep 0x82 - rounding interval to 256 microframes, ep desc says 384 microframes
[    1.638601] Adding 4058108k swap on /dev/sda5.  Priority:-1 extents:1 across:4058108k SSFS
[    1.697630] systemd-udevd[307]: starting version 204
[    1.749027] usb 5-2: new high-speed USB device number 3 using xhci_hcd
[    1.759787] mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
[    1.759902] parport_pc 00:0a: reported by Plug and Play ACPI
[    1.759947] parport0: PC-style at 0x378, irq 5 [PCSPP]
[    1.760449] lp: driver loaded but no devices found
[    1.762941] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.769241] wmi: Mapper loaded
[    1.785477] [drm] Initialized drm 1.1.0 20060810
[    1.787837] ppdev: user-space parallel port driver
[    1.855025] lp0: using parport0 (interrupt-driven).
[    1.867031] systemd-udevd[333]: renamed network interface eth0 to eth1
[    1.896178] type=1400 audit(1479908584.488:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=388 comm="apparmor_parser"
[    1.896183] type=1400 audit(1479908584.488:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=388 comm="apparmor_parser"
[    1.896185] type=1400 audit(1479908584.488:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=388 comm="apparmor_parser"
[    1.896452] type=1400 audit(1479908584.488:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=388 comm="apparmor_parser"
[    1.896455] type=1400 audit(1479908584.488:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=388 comm="apparmor_parser"
[    1.896591] type=1400 audit(1479908584.488:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=388 comm="apparmor_parser"
[    1.913918] [drm] Memory usable by graphics device = 2048M
[    1.913925] checking generic (e0000000 580000) vs hw (e0000000 10000000)
[    1.913927] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    1.913963] Console: switching to colour dummy device 80x25
[    1.939129] i915 0000:00:02.0: irq 50 for MSI/MSI-X
[    1.939140] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.939141] [drm] Driver supports precise vblank timestamp query.
[    1.939230] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.948287] hidraw: raw HID events driver (C) Jiri Kosina
[    1.991593] usb 5-2: New USB device found, idVendor=046d, idProduct=0825
[    1.991598] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[    1.991600] usb 5-2: SerialNumber: A76DA720
[    1.991649] fbcon: inteldrmfb (fb0) is primary device
[    2.008052] usbcore: registered new interface driver usbhid
[    2.008053] usbhid: USB HID core driver
[    2.023430] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input6
[    2.032142] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-8/input0
[    2.032901] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.1/input/input7
[    2.033028] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-8/input1
[    2.033123] input: Generic USB Keyboard as /devices/pci0000:00/0000:00:1c.5/0000:06:00.0/usb5/5-1/5-1:1.0/input/input8
[    2.038693] hid-generic 0003:040B:2000.0003: input,hidraw2: USB HID v1.10 Keyboard [Generic USB Keyboard] on usb-0000:06:00.0-1/input0
[    2.042228] Linux video capture interface: v2.00
[    2.085226] input: Generic USB Keyboard as /devices/pci0000:00/0000:00:1c.5/0000:06:00.0/usb5/5-1/5-1:1.1/input/input9
[    2.085348] hid-generic 0003:040B:2000.0004: input,hidraw3: USB HID v1.10 Mouse [Generic USB Keyboard] on usb-0000:06:00.0-1/input1
[    2.147500] Console: switching to colour frame buffer device 200x56
[    2.152462] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.152464] i915 0000:00:02.0: registered panic notifier
[    2.164141] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    2.168306] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.168698] acpi device:17: registered as cooling_device10
[    2.168778] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    2.170342] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.170597] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[    2.180056] HDA driver get symbol successfully from i915 module
[    2.180085] snd_hda_intel 0000:00:03.0: irq 52 for MSI/MSI-X
[    2.194892] SKU: Nid=0x1d sku_cfg=0x4025c603
[    2.194894] SKU: port_connectivity=0x1
[    2.194896] SKU: enable_pcbeep=0x0
[    2.194897] SKU: check_sum=0x00000005
[    2.194898] SKU: customization=0x000000c6
[    2.194899] SKU: external_amp=0x0
[    2.194899] SKU: platform_type=0x0
[    2.194900] SKU: swap=0x1
[    2.194901] SKU: override=0x1
[    2.195139] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    2.195140]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.195141]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.195141]    mono: mono_out=0x0
[    2.195142]    inputs:
[    2.195143]      Front Mic=0x19
[    2.195144]      Rear Mic=0x18
[    2.195145]      Line=0x1a
[    2.195146] realtek: No valid SSID, checking pincfg 0x4025c603 for NID 0x1d
[    2.195146] realtek: Enabling init ASM_ID=0xc603 CODEC_ID=10ec0887
[    2.202938] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[    2.203000] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[    2.203051] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[    2.219934] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card2/input18
[    2.220063] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card2/input17
[    2.220167] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card2/input16
[    2.220290] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input15
[    2.220393] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input14
[    2.297651] random: nonblocking pool is initialized
[    2.324564] init: failsafe main process (660) killed by TERM signal
[    2.425059] type=1400 audit(1479908585.016:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=732 comm="apparmor_parser"
[    2.425066] type=1400 audit(1479908585.016:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=732 comm="apparmor_parser"
[    2.425454] type=1400 audit(1479908585.016:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=732 comm="apparmor_parser"
[    2.425928] Bluetooth: Core ver 2.17
[    2.425964] NET: Registered protocol family 31
[    2.425966] Bluetooth: HCI device and connection manager initialized
[    2.425972] Bluetooth: HCI socket layer initialized
[    2.425973] Bluetooth: L2CAP socket layer initialized
[    2.425977] Bluetooth: SCO socket layer initialized
[    2.444670] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.444673] Bluetooth: BNEP filters: protocol multicast
[    2.444679] Bluetooth: BNEP socket layer initialized
[    2.448830] Bluetooth: RFCOMM TTY layer initialized
[    2.448838] Bluetooth: RFCOMM socket layer initialized
[    2.448843] Bluetooth: RFCOMM ver 1.11
[    2.462773] init: cups main process (738) killed by HUP signal
[    2.462782] init: cups main process ended, respawning
[    2.476201] Switched to clocksource tsc
[    2.519829] init: samba-ad-dc main process (763) terminated with status 1
[    2.582088] r8169 0000:03:00.0 eth1: link down
[    2.582117] r8169 0000:03:00.0 eth1: link down
[    2.582171] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    3.233242] init: plymouth-upstart-bridge main process ended, respawning
[    3.237883] init: plymouth-upstart-bridge main process (1144) terminated with status 1
[    3.237891] init: plymouth-upstart-bridge main process ended, respawning
[    3.359167] set resolution quirk: cval->res = 384
[    3.359330] usbcore: registered new interface driver snd-usb-audio
[    3.359342] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825)
[    3.374669] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:1c.5/0000:06:00.0/usb5/5-2/5-2:1.0/input/input19
[    3.374768] usbcore: registered new interface driver uvcvideo
[    3.374770] USB Video Class driver (1.1.1)
[    3.797840] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    4.350925] r8169 0000:03:00.0 eth1: link up
[    4.350934] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[    5.814834] show_signal_msg: 153 callbacks suppressed
[    5.814838] compiz[1568]: segfault at 0 ip   (null) sp bfe1313c error 14 in compiz[8048000+3000]
[   32.535917] type=1400 audit(1479908615.077:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2679 comm="apparmor_parser"
[   32.535922] type=1400 audit(1479908615.077:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2679 comm="apparmor_parser"
[   32.536184] type=1400 audit(1479908615.077:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2679 comm="apparmor_parser"
[  528.502309] usb 3-5: new high-speed USB device number 48 using xhci_hcd
[  528.502368] usb 3-5: Device not responding to set address.
[  528.706680] usb 3-5: Device not responding to set address.
[  528.910929] usb 3-5: device not accepting address 48, error -71
utilisateur@PCI3:~$

C) Idem pour le début

dmesg  | head -1200  |  tail -500
[    0.273177] pci 0000:00:02.0: Video device with shadowed ROM
[    0.273564] PCI: CLS 64 bytes, default 64
[    0.273592] Trying to unpack rootfs image as initramfs...
[    0.476162] Freeing initrd memory: 18344K (f5c1c000 - f6e06000)
[    0.476312] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1a
[    0.476317] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1a
[    0.476321] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1a
[    0.476326] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1a
[    0.476359] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.476361] Scanning for low memory corruption every 60 seconds
[    0.476525] Initialise system trusted keyring
[    0.476548] audit: initializing netlink socket (disabled)
[    0.476555] type=2000 audit(1479908582.472:1): initialized
[    0.490595] bounce pool size: 64 pages
[    0.490601] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.491228] zbud: loaded
[    0.491268] VFS: Disk quotas dquot_6.5.2
[    0.491293] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.491512] fuse init (API version 7.22)
[    0.491553] msgmni has been set to 1668
[    0.491585] Key type big_key registered
[    0.491861] Key type asymmetric registered
[    0.491862] Asymmetric key parser 'x509' registered
[    0.491878] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.491900] io scheduler noop registered
[    0.491901] io scheduler deadline registered (default)
[    0.491917] io scheduler cfq registered
[    0.492035] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.492239] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.492246] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.492267] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[    0.492268] vesafb: scrolling: redraw
[    0.492269] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.494136] vesafb: framebuffer at 0xe0000000, mapped to 0xf8480000, using 5632k, total 5632k
[    0.497044] Console: switching to colour frame buffer device 200x56
[    0.499883] fb0: VESA VGA frame buffer device
[    0.499896] intel_idle: MWAIT substates: 0x42120
[    0.499897] intel_idle: v0.4 model 0x3C
[    0.499897] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.499965] ipmi message handler version 39.2
[    0.500012] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.500015] ACPI: Power Button [PWRB]
[    0.500033] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.500035] ACPI: Sleep Button [SLPB]
[    0.500052] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.500053] ACPI: Power Button [PWRF]
[    0.500092] ACPI: Fan [FAN0] (off)
[    0.500105] ACPI: Fan [FAN1] (off)
[    0.500117] ACPI: Fan [FAN2] (off)
[    0.500129] ACPI: Fan [FAN3] (off)
[    0.500141] ACPI: Fan [FAN4] (off)
[    0.500381] thermal LNXTHERM:00: registered as thermal_zone0
[    0.500383] ACPI: Thermal Zone [TZ00] (28 C)
[    0.500489] thermal LNXTHERM:01: registered as thermal_zone1
[    0.500490] ACPI: Thermal Zone [TZ01] (30 C)
[    0.500506] GHES: HEST is not enabled!
[    0.500555] isapnp: Scanning for PnP cards...
[    0.500563] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.520997] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.521839] Linux agpgart interface v0.103
[    0.522585] brd: module loaded
[    0.522968] loop: module loaded
[    0.523160] libphy: Fixed MDIO Bus: probed
[    0.523206] tun: Universal TUN/TAP device driver, 1.6
[    0.523207] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.523229] PPP generic driver version 2.4.2
[    0.523253] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.523255] ehci-pci: EHCI PCI platform driver
[    0.523327] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.523330] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.523340] ehci-pci 0000:00:1a.0: debug port 2
[    0.527248] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.527259] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e1b000
[    0.536982] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.537005] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.537006] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.537007] usb usb1: Product: EHCI Host Controller
[    0.537008] usb usb1: Manufacturer: Linux 3.13.0-101-generic ehci_hcd
[    0.537009] usb usb1: SerialNumber: 0000:00:1a.0
[    0.537070] hub 1-0:1.0: USB hub found
[    0.537073] hub 1-0:1.0: 2 ports detected
[    0.537187] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.537189] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.537199] ehci-pci 0000:00:1d.0: debug port 2
[    0.541092] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.541102] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1a000
[    0.553015] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.553040] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.553042] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.553043] usb usb2: Product: EHCI Host Controller
[    0.553044] usb usb2: Manufacturer: Linux 3.13.0-101-generic ehci_hcd
[    0.553044] usb usb2: SerialNumber: 0000:00:1d.0
[    0.553105] hub 2-0:1.0: USB hub found
[    0.553109] hub 2-0:1.0: 2 ports detected
[    0.553171] ehci-platform: EHCI generic platform driver
[    0.553175] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.553176] ohci-pci: OHCI PCI platform driver
[    0.553181] ohci-platform: OHCI generic platform driver
[    0.553184] uhci_hcd: USB Universal Host Controller Interface driver
[    0.553251] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.553254] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.554320] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.554334] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    0.554374] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.554375] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.554376] usb usb3: Product: xHCI Host Controller
[    0.554377] usb usb3: Manufacturer: Linux 3.13.0-101-generic xhci_hcd
[    0.554378] usb usb3: SerialNumber: 0000:00:14.0
[    0.554436] hub 3-0:1.0: USB hub found
[    0.554451] hub 3-0:1.0: 14 ports detected
[    0.556689] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.556691] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.556718] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.556719] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.556720] usb usb4: Product: xHCI Host Controller
[    0.556721] usb usb4: Manufacturer: Linux 3.13.0-101-generic xhci_hcd
[    0.556722] usb usb4: SerialNumber: 0000:00:14.0
[    0.556777] hub 4-0:1.0: USB hub found
[    0.556787] hub 4-0:1.0: 6 ports detected
[    0.812688] isapnp: No Plug & Play device found
[    0.845513] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    0.845517] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
[    0.849446] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.850789] xhci_hcd 0000:06:00.0: irq 42 for MSI/MSI-X
[    0.850793] xhci_hcd 0000:06:00.0: irq 43 for MSI/MSI-X
[    0.850796] xhci_hcd 0000:06:00.0: irq 44 for MSI/MSI-X
[    0.850799] xhci_hcd 0000:06:00.0: irq 45 for MSI/MSI-X
[    0.850802] xhci_hcd 0000:06:00.0: irq 46 for MSI/MSI-X
[    0.850881] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    0.850882] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.850883] usb usb5: Product: xHCI Host Controller
[    0.850884] usb usb5: Manufacturer: Linux 3.13.0-101-generic xhci_hcd
[    0.850885] usb usb5: SerialNumber: 0000:06:00.0
[    0.851015] hub 5-0:1.0: USB hub found
[    0.851021] hub 5-0:1.0: 2 ports detected
[    0.851062] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    0.851064] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
[    0.854311] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    0.854312] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.854313] usb usb6: Product: xHCI Host Controller
[    0.854314] usb usb6: Manufacturer: Linux 3.13.0-101-generic xhci_hcd
[    0.854315] usb usb6: SerialNumber: 0000:06:00.0
[    0.854444] hub 6-0:1.0: USB hub found
[    0.854451] hub 6-0:1.0: 2 ports detected
[    0.893569] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.895886] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.895891] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.896094] mousedev: PS/2 mouse device common for all mice
[    0.896443] rtc_cmos 00:06: RTC can wake from S4
[    0.896537] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.896561] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.896600] device-mapper: uevent: version 1.0.3
[    0.896637] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.896647] platform eisa.0: Probing EISA bus 0
[    0.896648] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.896649] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.896650] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.896651] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.896652] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.896653] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.896654] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.896655] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.896656] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.896657] platform eisa.0: EISA: Detected 0 cards
[    0.896660] cpufreq-nforce2: No nForce2 chipset.
[    0.896662] ledtrig-cpu: registered to indicate activity on CPUs
[    0.896733] TCP: cubic registered
[    0.896777] NET: Registered protocol family 10
[    0.896882] NET: Registered protocol family 17
[    0.896887] Key type dns_resolver registered
[    0.896998] Using IPI No-Shortcut mode
[    0.897058] Loading compiled-in X.509 certificates
[    0.898970] Loaded X.509 cert 'Magrathea: Glacier signing key: 72ec495539ad08c5f59ba7888fa74d487176abf5'
[    0.898977] registered taskstats version 1
[    0.900286] Key type trusted registered
[    0.902420] Key type encrypted registered
[    0.902423] AppArmor: AppArmor sha1 policy hashing enabled
[    0.902424] IMA: No TPM chip found, activating TPM-bypass!
[    0.902769] regulator-dummy: disabling
[    0.902821]   Magic number: 8:821:736
[    0.902890] rtc_cmos 00:06: setting system clock to 2016-11-23 13:43:03 UTC (1479908583)
[    0.903293] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.903294] EDD information not available.
[    0.903321] PM: Hibernation image not present or could not be loaded.
[    0.903460] Freeing unused kernel memory: 884K (c19c7000 - c1aa4000)
[    0.903487] Write protecting the kernel text: 6588k
[    0.903525] Write protecting the kernel read-only data: 2780k
[    0.903525] NX-protecting the kernel data: 5700k
[    0.910431] systemd-udevd[110]: starting version 204
[    0.935260] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.935269] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.935800] ahci 0000:00:1f.2: version 3.0
[    0.935887] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[    0.935932] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
[    0.935935] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
[    0.941972] r8169 0000:03:00.0: irq 48 for MSI/MSI-X
[    0.942124] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xf8428000, 44:8a:5b:cf:8b:28, XID 0c000800 IRQ 48
[    0.942126] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.949931] scsi0 : ahci
[    0.949983] scsi1 : ahci
[    0.950023] scsi2 : ahci
[    0.950062] scsi3 : ahci
[    0.950100] scsi4 : ahci
[    0.950156] scsi5 : ahci
[    0.950186] ata1: SATA max UDMA/133 abar m2048@0xf7e19000 port 0xf7e19100 irq 47
[    0.950188] ata2: SATA max UDMA/133 abar m2048@0xf7e19000 port 0xf7e19180 irq 47
[    0.950189] ata3: DUMMY
[    0.950190] ata4: DUMMY
[    0.950192] ata5: SATA max UDMA/133 abar m2048@0xf7e19000 port 0xf7e19300 irq 47
[    0.950193] ata6: DUMMY
[    0.981992] usb 1-1: New USB device found, idVendor=8087, idProduct=8009
[    0.981994] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.982262] hub 1-1:1.0: USB hub found
[    0.982366] hub 1-1:1.0: 6 ports detected
[    1.093828] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.226349] usb 2-1: New USB device found, idVendor=8087, idProduct=8001
[    1.226351] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.226600] hub 2-1:1.0: USB hub found
[    1.226723] hub 2-1:1.0: 8 ports detected
[    1.270084] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.270100] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.270115] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.270820] ata2.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133
[    1.270823] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.271550] ata2.00: configured for UDMA/133
[    1.272353] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[    1.272356] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node f34753d8), AE_NOT_FOUND (20131115/psparse-536)
[    1.272362] ata5.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB01, max UDMA/100
[    1.273493] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[    1.273497] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node f34753d8), AE_NOT_FOUND (20131115/psparse-536)
[    1.273502] ata5.00: configured for UDMA/100
[    1.285206] ata1.00: ATA-8: KINGSTON SV300S37A120G, 600ABBF0, max UDMA/133
[    1.285208] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.295358] ata1.00: configured for UDMA/133
[    1.295544] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 600A PQ: 0 ANSI: 5
[    1.295619] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.295631] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.295651] sd 0:0:0:0: [sda] Write Protect is off
[    1.295653] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.295664] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.295728] scsi 1:0:0:0: Direct-Access     ATA      ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
[    1.295831] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.295833] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.295854] sd 1:0:0:0: [sdb] Write Protect is off
[    1.295857] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.295859] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.295867] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.296066]  sda: sda1 sda2 < sda5 >
[    1.296349] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.297670] scsi 4:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224DB  SB01 PQ: 0 ANSI: 5
[    1.300622] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.300623] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.300704] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.300754] sr 4:0:0:0: Attached scsi generic sg2 type 5
[    1.341252]  sdb: sdb1
[    1.341360] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.375799] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    1.375801] EXT4-fs (sda1): write access will be enabled during recovery
[    1.439660] EXT4-fs (sda1): orphan cleanup on readonly fs
[    1.450322] usb 3-8: new full-speed USB device number 3 using xhci_hcd
[    1.457820] EXT4-fs (sda1): 31 orphan inodes deleted
[    1.457821] EXT4-fs (sda1): recovery complete
[    1.458994] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.468747] usb 3-8: New USB device found, idVendor=046d, idProduct=c52f
[    1.468761] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.468762] usb 3-8: Product: USB Receiver
[    1.468763] usb 3-8: Manufacturer: Logitech
[    1.474351] tsc: Refined TSC clocksource calibration: 3499.999 MHz
[    1.533751] random: init urandom read with 65 bits of entropy available
[    1.553508] init: plymouth-upstart-bridge main process (182) terminated with status 1
[    1.553517] init: plymouth-upstart-bridge main process ended, respawning
[    1.555380] init: plymouth-upstart-bridge main process (193) terminated with status 1
[    1.555387] init: plymouth-upstart-bridge main process ended, respawning
[    1.556906] init: plymouth-upstart-bridge main process (195) terminated with status 1
[    1.556914] init: plymouth-upstart-bridge main process ended, respawning
[    1.558642] init: plymouth-upstart-bridge main process (196) terminated with status 1
[    1.558651] init: plymouth-upstart-bridge main process ended, respawning
[    1.560561] init: plymouth-upstart-bridge main process (198) terminated with status 1
[    1.560571] init: plymouth-upstart-bridge main process ended, respawning
[    1.582513] usb 5-1: new low-speed USB device number 2 using xhci_hcd
[    1.634346] usb 5-1: New USB device found, idVendor=040b, idProduct=2000
[    1.634350] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.634352] usb 5-1: Product: USB Keyboard
[    1.634354] usb 5-1: Manufacturer: Generic
[    1.634426] usb 5-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
[    1.634430] usb 5-1: ep 0x82 - rounding interval to 256 microframes, ep desc says 384 microframes
[    1.638601] Adding 4058108k swap on /dev/sda5.  Priority:-1 extents:1 across:4058108k SSFS
[    1.697630] systemd-udevd[307]: starting version 204
[    1.749027] usb 5-2: new high-speed USB device number 3 using xhci_hcd
[    1.759787] mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
[    1.759902] parport_pc 00:0a: reported by Plug and Play ACPI
[    1.759947] parport0: PC-style at 0x378, irq 5 [PCSPP]
[    1.760449] lp: driver loaded but no devices found
[    1.762941] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.769241] wmi: Mapper loaded
[    1.785477] [drm] Initialized drm 1.1.0 20060810
[    1.787837] ppdev: user-space parallel port driver
[    1.855025] lp0: using parport0 (interrupt-driven).
[    1.867031] systemd-udevd[333]: renamed network interface eth0 to eth1
[    1.896178] type=1400 audit(1479908584.488:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=388 comm="apparmor_parser"
[    1.896183] type=1400 audit(1479908584.488:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=388 comm="apparmor_parser"
[    1.896185] type=1400 audit(1479908584.488:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=388 comm="apparmor_parser"
[    1.896452] type=1400 audit(1479908584.488:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=388 comm="apparmor_parser"
[    1.896455] type=1400 audit(1479908584.488:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=388 comm="apparmor_parser"
[    1.896591] type=1400 audit(1479908584.488:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=388 comm="apparmor_parser"
[    1.913918] [drm] Memory usable by graphics device = 2048M
[    1.913925] checking generic (e0000000 580000) vs hw (e0000000 10000000)
[    1.913927] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    1.913963] Console: switching to colour dummy device 80x25
[    1.939129] i915 0000:00:02.0: irq 50 for MSI/MSI-X
[    1.939140] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.939141] [drm] Driver supports precise vblank timestamp query.
[    1.939230] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.948287] hidraw: raw HID events driver (C) Jiri Kosina
[    1.991593] usb 5-2: New USB device found, idVendor=046d, idProduct=0825
[    1.991598] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[    1.991600] usb 5-2: SerialNumber: A76DA720
[    1.991649] fbcon: inteldrmfb (fb0) is primary device
[    2.008052] usbcore: registered new interface driver usbhid
[    2.008053] usbhid: USB HID core driver
[    2.023430] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input6
[    2.032142] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-8/input0
[    2.032901] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.1/input/input7
[    2.033028] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-8/input1
[    2.033123] input: Generic USB Keyboard as /devices/pci0000:00/0000:00:1c.5/0000:06:00.0/usb5/5-1/5-1:1.0/input/input8
[    2.038693] hid-generic 0003:040B:2000.0003: input,hidraw2: USB HID v1.10 Keyboard [Generic USB Keyboard] on usb-0000:06:00.0-1/input0
[    2.042228] Linux video capture interface: v2.00
[    2.085226] input: Generic USB Keyboard as /devices/pci0000:00/0000:00:1c.5/0000:06:00.0/usb5/5-1/5-1:1.1/input/input9
[    2.085348] hid-generic 0003:040B:2000.0004: input,hidraw3: USB HID v1.10 Mouse [Generic USB Keyboard] on usb-0000:06:00.0-1/input1
[    2.147500] Console: switching to colour frame buffer device 200x56
[    2.152462] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.152464] i915 0000:00:02.0: registered panic notifier
[    2.164141] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    2.168306] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.168698] acpi device:17: registered as cooling_device10
[    2.168778] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    2.170342] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.170597] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[    2.180056] HDA driver get symbol successfully from i915 module
[    2.180085] snd_hda_intel 0000:00:03.0: irq 52 for MSI/MSI-X
[    2.194892] SKU: Nid=0x1d sku_cfg=0x4025c603
[    2.194894] SKU: port_connectivity=0x1
[    2.194896] SKU: enable_pcbeep=0x0
[    2.194897] SKU: check_sum=0x00000005
[    2.194898] SKU: customization=0x000000c6
[    2.194899] SKU: external_amp=0x0
[    2.194899] SKU: platform_type=0x0
[    2.194900] SKU: swap=0x1
[    2.194901] SKU: override=0x1
[    2.195139] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    2.195140]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.195141]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.195141]    mono: mono_out=0x0
[    2.195142]    inputs:
[    2.195143]      Front Mic=0x19
[    2.195144]      Rear Mic=0x18
[    2.195145]      Line=0x1a
[    2.195146] realtek: No valid SSID, checking pincfg 0x4025c603 for NID 0x1d
[    2.195146] realtek: Enabling init ASM_ID=0xc603 CODEC_ID=10ec0887
[    2.202938] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[    2.203000] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[    2.203051] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[    2.219934] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card2/input18
[    2.220063] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card2/input17
[    2.220167] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card2/input16
[    2.220290] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input15
[    2.220393] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input14
[    2.297651] random: nonblocking pool is initialized
[    2.324564] init: failsafe main process (660) killed by TERM signal
[    2.425059] type=1400 audit(1479908585.016:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=732 comm="apparmor_parser"
[    2.425066] type=1400 audit(1479908585.016:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=732 comm="apparmor_parser"
[    2.425454] type=1400 audit(1479908585.016:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=732 comm="apparmor_parser"
[    2.425928] Bluetooth: Core ver 2.17
[    2.425964] NET: Registered protocol family 31
[    2.425966] Bluetooth: HCI device and connection manager initialized
[    2.425972] Bluetooth: HCI socket layer initialized
[    2.425973] Bluetooth: L2CAP socket layer initialized
[    2.425977] Bluetooth: SCO socket layer initialized
[    2.444670] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.444673] Bluetooth: BNEP filters: protocol multicast
[    2.444679] Bluetooth: BNEP socket layer initialized
[    2.448830] Bluetooth: RFCOMM TTY layer initialized
[    2.448838] Bluetooth: RFCOMM socket layer initialized
[    2.448843] Bluetooth: RFCOMM ver 1.11
[    2.462773] init: cups main process (738) killed by HUP signal
[    2.462782] init: cups main process ended, respawning
[    2.476201] Switched to clocksource tsc
[    2.519829] init: samba-ad-dc main process (763) terminated with status 1
[    2.582088] r8169 0000:03:00.0 eth1: link down
[    2.582117] r8169 0000:03:00.0 eth1: link down
[    2.582171] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    3.233242] init: plymouth-upstart-bridge main process ended, respawning
[    3.237883] init: plymouth-upstart-bridge main process (1144) terminated with status 1
[    3.237891] init: plymouth-upstart-bridge main process ended, respawning
[    3.359167] set resolution quirk: cval->res = 384
[    3.359330] usbcore: registered new interface driver snd-usb-audio
[    3.359342] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825)
[    3.374669] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:1c.5/0000:06:00.0/usb5/5-2/5-2:1.0/input/input19
[    3.374768] usbcore: registered new interface driver uvcvideo
[    3.374770] USB Video Class driver (1.1.1)
[    3.797840] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    4.350925] r8169 0000:03:00.0 eth1: link up
[    4.350934] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[    5.814834] show_signal_msg: 153 callbacks suppressed
[    5.814838] compiz[1568]: segfault at 0 ip   (null) sp bfe1313c error 14 in compiz[8048000+3000]
[   32.535917] type=1400 audit(1479908615.077:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2679 comm="apparmor_parser"
[   32.535922] type=1400 audit(1479908615.077:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2679 comm="apparmor_parser"
[   32.536184] type=1400 audit(1479908615.077:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2679 comm="apparmor_parser"
[  528.502309] usb 3-5: new high-speed USB device number 48 using xhci_hcd
[  528.502368] usb 3-5: Device not responding to set address.
[  528.706680] usb 3-5: Device not responding to set address.
[  528.910929] usb 3-5: device not accepting address 48, error -71
utilisateur@PCI3:~$

D) Pour l'imprimante, je ne sais pas si je vais mettre le bon mot 

dmesg |   grep printer

Effectivement ce n'est pas le bon mot. wink

Hors ligne

#4 Le 23/11/2016, à 17:31

chafoin

Re : HELP ! problèmes multiples (démarrage/ extinction/ imprimantes/ maj)

J'espère avoir mis les bons éléments.
Merci d'avance !

Hors ligne

#5 Le 23/11/2016, à 17:59

Bougron

Re : HELP ! problèmes multiples (démarrage/ extinction/ imprimantes/ maj)

Un point de réponse rapide
1)  L'update a mis en évidence cette erreur

W: Impossible de récupérer http://dl.google.com/linux/chrome/deb/dists/stable/Release  Impossible de trouver l'entrée « main/binary-i386/Packages » attendue dans le fichier « Release » : ligne non valable dans sources.list ou fichier corrompu

Le problème est connu, La version 32 bits de cet outil n'existe plus
    Soit tu peux déinstaller soit tu modifies à la main le fichier de référence.
          Il y a des discussions dans le forum sur ce problème.

3) L'upgrade a mis en évidence ce  problème de doublons.

: Duplicate sources.list entry http://download.mono-project.com/repo/debian/ wheezy-apache24-compat/main i386 Packages (/var/lib/apt/lists/download.mono-project.com_repo_debian_dists_wheezy-apache24-compat_main_binary-i386_Packages)
W: Duplicate sources.list entry http://download.mono-project.com/repo/debian/ wheezy-apache24-compat/main i386 Packages (/var/lib/apt/lists/download.mono-project.com_repo_debian_dists_wheezy-apache24-compat_main_binary-i386_Packages)
W: Duplicate sources.list entry http://download.mono-project.com/repo/debian/ wheezy-apache24-compat/main i386 Packages (/var/lib/apt/lists/download.mono-project.com_repo_debian_dists_wheezy-apache24-compat_main_binary-i386_Packages)

Il faudra penser à faire le ménage dans le fichier en question qui est stocké dans ce répertoire /etc/apt/sources.list.d pour n'avoir qu'une seule référence

4) Finalement la trace est beaucoup plus courte que je croyais
   Je peux donc dire qu'aucune imprimante n'est détectée
  Donc pour le problème de l'imprimante, tu peux immédiatement ouvrir une autre discussion ne ciblant que le problème de l'imprimante

5)   J'ai détecté cette ligne absolument anormale

[    5.814838] compiz[1568]: segfault at 0 ip   (null) sp bfe1313c error 14 in compiz[8048000+3000]

Qui est certainement le problème.  Je vais creuser plus
==>  https://www.google.fr/search?as_q=compi … as_rights=

Dernière modification par Bougron (Le 23/11/2016, à 19:32)

Hors ligne

#6 Le 23/11/2016, à 19:10

Bougron

Re : HELP ! problèmes multiples (démarrage/ extinction/ imprimantes/ maj)

Il y a aussi cela que j'ai identifié

[  528.502309] usb 3-5: new high-speed USB device number 48 using xhci_hcd
[  528.502368] usb 3-5: Device not responding to set address.
[  528.706680] usb 3-5: Device not responding to set address.
[  528.910929] usb 3-5: device not accepting address 48, error -71
utilisateur@PCI3:~$

Je ne trouve rien sur internet avec l'erreur -71

Tu devrais débrancher l'imprimante au prochain boot, pour voir si cette erreur est présente

dmesg  | grep  71

Si l'erreur n'est pas présente, Tu branches l'imprimante et 10 minutes plus tard, tu regardes le branchement

dmesg | tail -50

Je n'ai pas réussi à identifier la carte graphique.

Peux-tu aussi faire

cat    /etc/lsb-release

Sinon, j'avais pensé à cette discussion  https://forum.ubuntu-fr.org/viewtopic.p … #p21588156

sudo gedit    /etc/default/grub

Modifier la ligne afin qu'elle devienne

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash    acpi=off"

Sauvegarder puis valider pour le boot suivant par la commande

sudo update-grub

Tu peux essayer. On ne sait jamais

Dernière modification par Bougron (Le 23/11/2016, à 19:37)

Hors ligne

#7 Le 23/11/2016, à 20:21

chafoin

Re : HELP ! problèmes multiples (démarrage/ extinction/ imprimantes/ maj)

Ok , merci pour toutes ces infos, je vais faire tout ça un peu plus tard dans la soirée. je te tiens au courant en suivant. wink

Hors ligne

#8 Le 23/11/2016, à 20:28

chafoin

Re : HELP ! problèmes multiples (démarrage/ extinction/ imprimantes/ maj)

Je n'ai pas réussi à identifier la carte graphique. Peux-tu aussi faire/cat /etc/lsb-release/

utilisateur@PCI3:~$ cat    /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=14.04
DISTRIB_CODENAME=trusty
DISTRIB_DESCRIPTION="Ubuntu 14.04.5 LTS"
utilisateur@PCI3:~$

Hors ligne

#9 Le 23/11/2016, à 23:55

chafoin

Re : HELP ! problèmes multiples (démarrage/ extinction/ imprimantes/ maj)

Voilà le résultat pour cette partie :

Sinon, j'avais pensé à cette discussion  https://forum.ubuntu-fr.org/viewtopic.p … #p21588156

sudo gedit    /etc/default/grub

Modifier la ligne afin qu'elle devienne

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash    acpi=off"

Sauvegarder puis valider pour le boot suivant par la commande

sudo update-grub  
utilisateur@PCI3:~$ sudo update-grub
[sudo] password for utilisateur: 
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-3.13.0-101-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-101-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-100-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-100-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-98-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-98-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-96-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-96-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-92-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-92-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-88-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-88-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-87-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-87-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-86-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-86-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-85-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-85-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-83-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-83-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-79-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-79-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-77-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-77-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-76-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-76-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-74-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-74-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-71-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-71-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-68-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-68-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-67-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-67-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-65-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-65-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-63-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-63-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-62-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-62-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-61-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-61-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-57-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-57-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-55-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-55-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-53-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-53-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-52-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-52-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-49-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-49-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-45-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-45-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-44-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-44-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-24-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-24-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
fait
utilisateur@PCI3:~$

Pour l'imprimante, je n'ai pas encore testé, d'ailleurs elle n'est reliée que lorsque je l'utilise et ne l'était pas pour les commandes que tu m'as demandé,  je vais te les redonner.

Merci

Hors ligne

#10 Le 24/11/2016, à 00:25

Bougron

Re : HELP ! problèmes multiples (démarrage/ extinction/ imprimantes/ maj)

Je vois que tu as une liste impressionnante de noyaux.
Au lieu de booter  sur la première ligne, choisis la seconde ligne et enfin un ligne normale du milieu de la liste et indiques si la durée du boot est pareile. Idem pour l'arrêt.
Au besoin prends la dernière de la liste.

Dernière modification par Bougron (Le 24/11/2016, à 00:25)

Hors ligne

#11 Le 24/11/2016, à 00:32

chafoin

Re : HELP ! problèmes multiples (démarrage/ extinction/ imprimantes/ maj)

Du coup je te redonne les commandes depuis le début car je ne sais pas bien si ce que je t'ai donné comme infos avant était bonne ou non.

A) 

utilisateur@PCI3:~$ sudo apt update
[sudo] password for utilisateur: 
Ign http://dl.google.com stable InRelease
Ign http://archive.canonical.com trusty InRelease                              
Ign http://dl.google.com stable InRelease                                      
Atteint http://archive.canonical.com trusty Release.gpg                        
Atteint http://download.mono-project.com wheezy-apache24-compat InRelease      
Atteint http://dl.google.com stable Release.gpg                                
Atteint http://archive.canonical.com trusty Release                            
Atteint http://dl.google.com stable Release.gpg                                
Atteint http://archive.canonical.com trusty/partner Sources                    
Atteint http://dl.google.com stable Release                                    
Atteint http://archive.canonical.com trusty/partner i386 Packages              
Atteint http://archive.canonical.com trusty/partner Translation-en             
Atteint http://dl.google.com stable Release                                    
Atteint http://dl.google.com stable/main i386 Packages                         
Atteint http://download.mono-project.com wheezy-apache24-compat/main i386 Packages
Ign https://private-ppa.launchpad.net trusty InRelease                         
Ign https://private-ppa.launchpad.net trusty/main i386 Packages/DiffIndex      
Atteint https://private-ppa.launchpad.net trusty/main Translation-en           
Atteint https://private-ppa.launchpad.net trusty/main i386 Packages            
Ign http://dl.google.com stable/main Translation-fr_FR                         
Ign http://download.mono-project.com wheezy-apache24-compat/main Translation-fr_FR
Ign http://dl.google.com stable/main Translation-fr                            
Ign http://dl.google.com stable/main Translation-en                            
Ign https://private-ppa.launchpad.net trusty/main Translation-fr_FR            
Ign https://private-ppa.launchpad.net trusty/main Translation-fr               
Ign http://download.mono-project.com wheezy-apache24-compat/main Translation-fr
Ign http://download.mono-project.com wheezy-apache24-compat/main Translation-en
Ign http://extras.ubuntu.com trusty InRelease                                  
Ign http://fr.archive.ubuntu.com trusty InRelease                              
Atteint http://extras.ubuntu.com trusty Release.gpg
Atteint http://fr.archive.ubuntu.com trusty-updates InRelease
Atteint http://extras.ubuntu.com trusty Release                                
Atteint http://fr.archive.ubuntu.com trusty-backports InRelease         
Atteint http://extras.ubuntu.com trusty/main Sources                           
Atteint http://fr.archive.ubuntu.com trusty-security InRelease          
Atteint http://extras.ubuntu.com trusty/main i386 Packages                     
Atteint http://fr.archive.ubuntu.com trusty Release.gpg                        
Atteint http://fr.archive.ubuntu.com trusty-updates/main Sources        
Atteint http://fr.archive.ubuntu.com trusty-updates/restricted Sources         
Atteint http://fr.archive.ubuntu.com trusty-updates/universe Sources           
Atteint http://fr.archive.ubuntu.com trusty-updates/multiverse Sources         
Atteint http://fr.archive.ubuntu.com trusty-updates/main i386 Packages         
Atteint http://fr.archive.ubuntu.com trusty-updates/restricted i386 Packages   
Atteint http://fr.archive.ubuntu.com trusty-updates/universe i386 Packages     
Atteint http://fr.archive.ubuntu.com trusty-updates/multiverse i386 Packages   
Atteint http://fr.archive.ubuntu.com trusty-updates/main Translation-en        
Atteint http://fr.archive.ubuntu.com trusty-updates/multiverse Translation-en  
Atteint http://fr.archive.ubuntu.com trusty-updates/restricted Translation-en  
Atteint http://fr.archive.ubuntu.com trusty-updates/universe Translation-en    
Ign http://extras.ubuntu.com trusty/main Translation-fr_FR                     
Atteint http://fr.archive.ubuntu.com trusty-backports/main Sources             
Ign http://extras.ubuntu.com trusty/main Translation-fr                        
Ign http://extras.ubuntu.com trusty/main Translation-en                        
Atteint http://fr.archive.ubuntu.com trusty-backports/restricted Sources       
Atteint http://fr.archive.ubuntu.com trusty-backports/universe Sources         
Atteint http://fr.archive.ubuntu.com trusty-backports/multiverse Sources       
Atteint http://fr.archive.ubuntu.com trusty-backports/main i386 Packages       
Atteint http://fr.archive.ubuntu.com trusty-backports/restricted i386 Packages 
Atteint http://fr.archive.ubuntu.com trusty-backports/universe i386 Packages   
Atteint http://fr.archive.ubuntu.com trusty-backports/multiverse i386 Packages 
Atteint http://fr.archive.ubuntu.com trusty-backports/main Translation-en      
Atteint http://fr.archive.ubuntu.com trusty-backports/multiverse Translation-en
Atteint http://fr.archive.ubuntu.com trusty-backports/restricted Translation-en
Atteint http://fr.archive.ubuntu.com trusty-backports/universe Translation-en  
Atteint http://fr.archive.ubuntu.com trusty-security/main Sources              
Atteint http://fr.archive.ubuntu.com trusty-security/restricted Sources        
Atteint http://fr.archive.ubuntu.com trusty-security/universe Sources          
Atteint http://fr.archive.ubuntu.com trusty-security/multiverse Sources        
Atteint http://fr.archive.ubuntu.com trusty-security/main i386 Packages        
Atteint http://fr.archive.ubuntu.com trusty-security/restricted i386 Packages  
Atteint http://fr.archive.ubuntu.com trusty-security/universe i386 Packages    
Atteint http://fr.archive.ubuntu.com trusty-security/multiverse i386 Packages  
Atteint http://fr.archive.ubuntu.com trusty-security/main Translation-en       
Atteint http://fr.archive.ubuntu.com trusty-security/multiverse Translation-en 
Atteint http://fr.archive.ubuntu.com trusty-security/restricted Translation-en 
Atteint http://fr.archive.ubuntu.com trusty-security/universe Translation-en   
Atteint http://fr.archive.ubuntu.com trusty Release                            
Atteint http://fr.archive.ubuntu.com trusty/main Sources                       
Atteint http://fr.archive.ubuntu.com trusty/restricted Sources                 
Atteint http://fr.archive.ubuntu.com trusty/universe Sources                   
Atteint http://fr.archive.ubuntu.com trusty/multiverse Sources                 
Atteint http://fr.archive.ubuntu.com trusty/main i386 Packages                 
Atteint http://fr.archive.ubuntu.com trusty/restricted i386 Packages           
Atteint http://fr.archive.ubuntu.com trusty/universe i386 Packages             
Atteint http://fr.archive.ubuntu.com trusty/multiverse i386 Packages           
Atteint http://fr.archive.ubuntu.com trusty/main Translation-fr                
Atteint http://fr.archive.ubuntu.com trusty/main Translation-en                
Atteint http://fr.archive.ubuntu.com trusty/multiverse Translation-fr          
Atteint http://fr.archive.ubuntu.com trusty/multiverse Translation-en          
Atteint http://fr.archive.ubuntu.com trusty/restricted Translation-fr          
Atteint http://fr.archive.ubuntu.com trusty/restricted Translation-en          
Atteint http://fr.archive.ubuntu.com trusty/universe Translation-fr            
Atteint http://fr.archive.ubuntu.com trusty/universe Translation-en            
Ign http://fr.archive.ubuntu.com trusty/main Translation-fr_FR                 
Ign http://fr.archive.ubuntu.com trusty/multiverse Translation-fr_FR           
Ign http://fr.archive.ubuntu.com trusty/restricted Translation-fr_FR           
Ign http://fr.archive.ubuntu.com trusty/universe Translation-fr_FR             
15,5 ko réceptionnés en 15s (986 o/s)                                          
W: Aucune clé publique n'est disponible pour la/les clé(s) suivante(s) :
1397BC53640DB551
W: Aucune clé publique n'est disponible pour la/les clé(s) suivante(s) :
1397BC53640DB551
W: Erreur de GPG : https://private-ppa.launchpad.net trusty InRelease : Les signatures suivantes n'ont pas pu être vérifiées car la clé publique n'est pas disponible : NO_PUBKEY E131728675254D99
W: Impossible de récupérer http://dl.google.com/linux/chrome/deb/dists/stable/Release  Impossible de trouver l'entrée « main/binary-i386/Packages » attendue dans le fichier « Release » : ligne non valable dans sources.list ou fichier corrompu

E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
utilisateur@PCI3:~$

sudo apt upgrade

 utilisateur@PCI3:~$ sudo apt upgrade
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Calcul de la mise à jour... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  libhdb9-heimdal libkdc2-heimdal linux-headers-3.13.0-24
  linux-headers-3.13.0-24-generic linux-image-3.13.0-24-generic
  linux-image-extra-3.13.0-24-generic
Veuillez utiliser « apt-get autoremove » pour les supprimer.
Les paquets suivants seront mis à jour :
  libnss-winbind libpam-winbind libsmbclient libwbclient0 python-samba samba
  samba-common samba-common-bin samba-dsdb-modules samba-libs
  samba-vfs-modules smbclient winbind
13 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 12,4 Mo dans les archives.
Après cette opération, 14,9 Mo d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] o
Réception de : 1 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/universe libnss-winbind i386 2:4.3.11+dfsg-0ubuntu0.14.04.2 [15,2 kB]
Réception de : 2 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/universe libpam-winbind i386 2:4.3.11+dfsg-0ubuntu0.14.04.2 [28,3 kB]
Réception de : 3 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main winbind i386 2:4.3.11+dfsg-0ubuntu0.14.04.2 [3 853 kB]
Réception de : 4 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main libwbclient0 i386 2:4.3.11+dfsg-0ubuntu0.14.04.2 [31,6 kB]
Réception de : 5 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main libsmbclient i386 2:4.3.11+dfsg-0ubuntu0.14.04.2 [53,4 kB]
Réception de : 6 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main smbclient i386 2:4.3.11+dfsg-0ubuntu0.14.04.2 [323 kB]
Réception de : 7 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main samba-vfs-modules i386 2:4.3.11+dfsg-0ubuntu0.14.04.2 [257 kB]
Réception de : 8 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main samba-dsdb-modules i386 2:4.3.11+dfsg-0ubuntu0.14.04.2 [215 kB]
Réception de : 9 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main samba i386 2:4.3.11+dfsg-0ubuntu0.14.04.2 [913 kB]
Réception de : 10 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main samba-common-bin i386 2:4.3.11+dfsg-0ubuntu0.14.04.2 [513 kB]
Réception de : 11 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main python-samba i386 2:4.3.11+dfsg-0ubuntu0.14.04.2 [973 kB]
Réception de : 12 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main samba-libs i386 2:4.3.11+dfsg-0ubuntu0.14.04.2 [5 117 kB]
Réception de : 13 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main samba-common all 2:4.3.11+dfsg-0ubuntu0.14.04.2 [84,4 kB]
12,4 Mo réceptionnés en 1min 22s (150 ko/s)                                    
Préconfiguration des paquets...
(Lecture de la base de données... 1022153 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../libnss-winbind_2%3a4.3.11+dfsg-0ubuntu0.14.04.2_i386.deb ...
Dépaquetage de libnss-winbind:i386 (2:4.3.11+dfsg-0ubuntu0.14.04.2) sur (2:4.3.11+dfsg-0ubuntu0.14.04.1) ...
Préparation du dépaquetage de .../libpam-winbind_2%3a4.3.11+dfsg-0ubuntu0.14.04.2_i386.deb ...
Dépaquetage de libpam-winbind:i386 (2:4.3.11+dfsg-0ubuntu0.14.04.2) sur (2:4.3.11+dfsg-0ubuntu0.14.04.1) ...
Préparation du dépaquetage de .../winbind_2%3a4.3.11+dfsg-0ubuntu0.14.04.2_i386.deb ...
winbind stop/waiting
Dépaquetage de winbind (2:4.3.11+dfsg-0ubuntu0.14.04.2) sur (2:4.3.11+dfsg-0ubuntu0.14.04.1) ...
Préparation du dépaquetage de .../libwbclient0_2%3a4.3.11+dfsg-0ubuntu0.14.04.2_i386.deb ...
Dépaquetage de libwbclient0:i386 (2:4.3.11+dfsg-0ubuntu0.14.04.2) sur (2:4.3.11+dfsg-0ubuntu0.14.04.1) ...
Préparation du dépaquetage de .../libsmbclient_2%3a4.3.11+dfsg-0ubuntu0.14.04.2_i386.deb ...
Dépaquetage de libsmbclient:i386 (2:4.3.11+dfsg-0ubuntu0.14.04.2) sur (2:4.3.11+dfsg-0ubuntu0.14.04.1) ...
Préparation du dépaquetage de .../smbclient_2%3a4.3.11+dfsg-0ubuntu0.14.04.2_i386.deb ...
Dépaquetage de smbclient (2:4.3.11+dfsg-0ubuntu0.14.04.2) sur (2:4.3.11+dfsg-0ubuntu0.14.04.1) ...
Préparation du dépaquetage de .../samba-vfs-modules_2%3a4.3.11+dfsg-0ubuntu0.14.04.2_i386.deb ...
Dépaquetage de samba-vfs-modules (2:4.3.11+dfsg-0ubuntu0.14.04.2) sur (2:4.3.11+dfsg-0ubuntu0.14.04.1) ...
Préparation du dépaquetage de .../samba-dsdb-modules_2%3a4.3.11+dfsg-0ubuntu0.14.04.2_i386.deb ...
Dépaquetage de samba-dsdb-modules (2:4.3.11+dfsg-0ubuntu0.14.04.2) sur (2:4.3.11+dfsg-0ubuntu0.14.04.1) ...
Préparation du dépaquetage de .../samba_2%3a4.3.11+dfsg-0ubuntu0.14.04.2_i386.deb ...
nmbd stop/waiting
smbd stop/waiting
Dépaquetage de samba (2:4.3.11+dfsg-0ubuntu0.14.04.2) sur (2:4.3.11+dfsg-0ubuntu0.14.04.1) ...
Préparation du dépaquetage de .../samba-common-bin_2%3a4.3.11+dfsg-0ubuntu0.14.04.2_i386.deb ...
Dépaquetage de samba-common-bin (2:4.3.11+dfsg-0ubuntu0.14.04.2) sur (2:4.3.11+dfsg-0ubuntu0.14.04.1) ...
Préparation du dépaquetage de .../python-samba_2%3a4.3.11+dfsg-0ubuntu0.14.04.2_i386.deb ...
Dépaquetage de python-samba (2:4.3.11+dfsg-0ubuntu0.14.04.2) sur (2:4.3.11+dfsg-0ubuntu0.14.04.1) ...
Préparation du dépaquetage de .../samba-libs_2%3a4.3.11+dfsg-0ubuntu0.14.04.2_i386.deb ...
Dépaquetage de samba-libs:i386 (2:4.3.11+dfsg-0ubuntu0.14.04.2) sur (2:4.3.11+dfsg-0ubuntu0.14.04.1) ...
Préparation du dépaquetage de .../samba-common_2%3a4.3.11+dfsg-0ubuntu0.14.04.2_all.deb ...
Dépaquetage de samba-common (2:4.3.11+dfsg-0ubuntu0.14.04.2) sur (2:4.3.11+dfsg-0ubuntu0.14.04.1) ...
Traitement des actions différées (« triggers ») pour man-db (2.6.7.1-1ubuntu1) ...
Traitement des actions différées (« triggers ») pour ureadahead (0.100.0-16) ...
Traitement des actions différées (« triggers ») pour ufw (0.34~rc-0ubuntu2) ...
Paramétrage de samba-common (2:4.3.11+dfsg-0ubuntu0.14.04.2) ...
Paramétrage de libwbclient0:i386 (2:4.3.11+dfsg-0ubuntu0.14.04.2) ...
Paramétrage de samba-libs:i386 (2:4.3.11+dfsg-0ubuntu0.14.04.2) ...
Paramétrage de python-samba (2:4.3.11+dfsg-0ubuntu0.14.04.2) ...
Paramétrage de samba-common-bin (2:4.3.11+dfsg-0ubuntu0.14.04.2) ...
Paramétrage de samba (2:4.3.11+dfsg-0ubuntu0.14.04.2) ...
smbd start/running, process 21351
nmbd start/running, process 21393
samba-ad-dc start/running, process 21430
Paramétrage de winbind (2:4.3.11+dfsg-0ubuntu0.14.04.2) ...
winbind start/running, process 21477
Paramétrage de libnss-winbind:i386 (2:4.3.11+dfsg-0ubuntu0.14.04.2) ...
Paramétrage de libpam-winbind:i386 (2:4.3.11+dfsg-0ubuntu0.14.04.2) ...
Paramétrage de libsmbclient:i386 (2:4.3.11+dfsg-0ubuntu0.14.04.2) ...
Paramétrage de smbclient (2:4.3.11+dfsg-0ubuntu0.14.04.2) ...
Paramétrage de samba-vfs-modules (2:4.3.11+dfsg-0ubuntu0.14.04.2) ...
Paramétrage de samba-dsdb-modules (2:4.3.11+dfsg-0ubuntu0.14.04.2) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.19-0ubuntu6.9) ...
W: Duplicate sources.list entry http://download.mono-project.com/repo/debian/ wheezy-apache24-compat/main i386 Packages (/var/lib/apt/lists/download.mono-project.com_repo_debian_dists_wheezy-apache24-compat_main_binary-i386_Packages)
W: Duplicate sources.list entry http://download.mono-project.com/repo/debian/ wheezy-apache24-compat/main i386 Packages (/var/lib/apt/lists/download.mono-project.com_repo_debian_dists_wheezy-apache24-compat_main_binary-i386_Packages)
W: Duplicate sources.list entry http://download.mono-project.com/repo/debian/ wheezy-apache24-compat/main i386 Packages (/var/lib/apt/lists/download.mono-project.com_repo_debian_dists_wheezy-apache24-compat_main_binary-i386_Packages)
W: Vous pouvez lancer « apt-get update » pour corriger ces problèmes.
utilisateur@PCI3:~$

B)

dmesg  | tail -500

  [    3.359342] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825)
[    3.374669] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:1c.5/0000:06:00.0/usb5/5-2/5-2:1.0/input/input19
[    3.374768] usbcore: registered new interface driver uvcvideo
[    3.374770] USB Video Class driver (1.1.1)
[    3.797840] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    4.350925] r8169 0000:03:00.0 eth1: link up
[    4.350934] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[    5.814834] show_signal_msg: 153 callbacks suppressed
[    5.814838] compiz[1568]: segfault at 0 ip   (null) sp bfe1313c error 14 in compiz[8048000+3000]
[   32.535917] type=1400 audit(1479908615.077:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2679 comm="apparmor_parser"
[   32.535922] type=1400 audit(1479908615.077:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2679 comm="apparmor_parser"
[   32.536184] type=1400 audit(1479908615.077:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2679 comm="apparmor_parser"
[  528.502309] usb 3-5: new high-speed USB device number 48 using xhci_hcd
[  528.502368] usb 3-5: Device not responding to set address.
[  528.706680] usb 3-5: Device not responding to set address.
[  528.910929] usb 3-5: device not accepting address 48, error -71
[ 9659.094408] usb 3-5: new high-speed USB device number 125 using xhci_hcd
[ 9659.094442] usb 3-5: Device not responding to set address.
[ 9659.298692] usb 3-5: Device not responding to set address.
[ 9659.502993] usb 3-5: device not accepting address 125, error -71
[13053.420019] perf samples too long (2576 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[15064.703242] usb 3-5: new high-speed USB device number 109 using xhci_hcd
[15064.703291] usb 3-5: Device not responding to set address.
[15064.907615] usb 3-5: Device not responding to set address.
[15065.111835] usb 3-5: device not accepting address 109, error -71
[15218.163671] usb 3-5: new high-speed USB device number 67 using xhci_hcd
[15218.163721] usb 3-5: Device not responding to set address.
[15218.368031] usb 3-5: Device not responding to set address.
[15218.572280] usb 3-5: device not accepting address 67, error -71
[16451.985085] systemd-hostnamed[6925]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[17178.036733] systemd-hostnamed[7068]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[20039.101492] usb 3-5: new high-speed USB device number 99 using xhci_hcd
[20039.101527] usb 3-5: Device not responding to set address.
[20039.305877] usb 3-5: Device not responding to set address.
[20039.510105] usb 3-5: device not accepting address 99, error -71
[20104.753523] usb 3-5: new high-speed USB device number 26 using xhci_hcd
[20104.753567] usb 3-5: Device not responding to set address.
[20104.957874] usb 3-5: Device not responding to set address.
[20105.162121] usb 3-5: device not accepting address 26, error -71
[22988.061945] usb 3-5: new high-speed USB device number 100 using xhci_hcd
[22988.061996] usb 3-5: Device not responding to set address.
[22988.266235] usb 3-5: Device not responding to set address.
[22988.470534] usb 3-5: device not accepting address 100, error -71
[24798.277075] usb 3-5: new high-speed USB device number 89 using xhci_hcd
[24798.277094] usb 3-5: Device not responding to set address.
[24798.481400] usb 3-5: Device not responding to set address.
[24798.685704] usb 3-5: device not accepting address 89, error -71
[25451.945006] usb 3-5: new high-speed USB device number 109 using xhci_hcd
[25451.945051] usb 3-5: Device not responding to set address.
[25452.149303] usb 3-5: Device not responding to set address.
[25452.353559] usb 3-5: device not accepting address 109, error -71
[25624.461261] usb 3-5: new high-speed USB device number 30 using xhci_hcd
[25624.461354] usb 3-5: Device not responding to set address.
[25624.665526] usb 3-5: Device not responding to set address.
[25624.869812] usb 3-5: device not accepting address 30, error -71
[25869.259182] usb 3-5: new high-speed USB device number 35 using xhci_hcd
[25869.259208] usb 3-5: Device not responding to set address.
[25869.463492] usb 3-5: Device not responding to set address.
[25869.667778] usb 3-5: device not accepting address 35, error -71
[26071.651200] usb 3-5: new high-speed USB device number 94 using xhci_hcd
[26071.651262] usb 3-5: Device not responding to set address.
[26071.855508] usb 3-5: Device not responding to set address.
[26072.059768] usb 3-5: device not accepting address 94, error -71
[26142.486758] usb 3-5: new high-speed USB device number 45 using xhci_hcd
[26142.486796] usb 3-5: Device not responding to set address.
[26142.691105] usb 3-5: Device not responding to set address.
[26142.895342] usb 3-5: device not accepting address 45, error -71
[26231.921555] usb 3-5: new high-speed USB device number 82 using xhci_hcd
[26231.921581] usb 3-5: Device not responding to set address.
[26232.125850] usb 3-5: Device not responding to set address.
[26232.330128] usb 3-5: device not accepting address 82, error -71
[26306.883127] usb 3-5: new high-speed USB device number 52 using xhci_hcd
[26306.883170] usb 3-5: Device not responding to set address.
[26307.087474] usb 3-5: Device not responding to set address.
[26307.291739] usb 3-5: device not accepting address 52, error -71
[26342.667510] usb 3-5: new high-speed USB device number 91 using xhci_hcd
[26342.667543] usb 3-5: Device not responding to set address.
[26342.871811] usb 3-5: Device not responding to set address.
[26343.076074] usb 3-5: device not accepting address 91, error -71
[26436.008006] usb 3-5: new high-speed USB device number 21 using xhci_hcd
[26436.008056] usb 3-5: Device not responding to set address.
[26436.212299] usb 3-5: Device not responding to set address.
[26436.416599] usb 3-5: device not accepting address 21, error -71
[26450.160718] usb 3-5: new high-speed USB device number 85 using xhci_hcd
[26450.160768] usb 3-5: Device not responding to set address.
[26450.365076] usb 3-5: Device not responding to set address.
[26450.569285] usb 3-5: device not accepting address 85, error -71
[26542.852254] usb 3-5: new high-speed USB device number 12 using xhci_hcd
[26542.852279] usb 3-5: Device not responding to set address.
[26543.056564] usb 3-5: Device not responding to set address.
[26543.260812] usb 3-5: device not accepting address 12, error -71
[26881.976157] usb 3-5: new high-speed USB device number 78 using xhci_hcd
[26881.976229] usb 3-5: Device not responding to set address.
[26882.180500] usb 3-5: Device not responding to set address.
[26882.384757] usb 3-5: device not accepting address 78, error -71
[28011.099319] usb 3-5: new high-speed USB device number 44 using xhci_hcd
[28011.099356] usb 3-5: Device not responding to set address.
[28011.303610] usb 3-5: Device not responding to set address.
[28011.507919] usb 3-5: device not accepting address 44, error -71
[28049.920108] usb 3-5: new high-speed USB device number 97 using xhci_hcd
[28049.920171] usb 3-5: Device not responding to set address.
[28050.124400] usb 3-5: Device not responding to set address.
[28050.328696] usb 3-5: device not accepting address 97, error -71
[28060.175095] usb 3-5: new high-speed USB device number 18 using xhci_hcd
[28060.175137] usb 3-5: Device not responding to set address.
[28060.379443] usb 3-5: Device not responding to set address.
[28060.583704] usb 3-5: device not accepting address 18, error -71
[28177.318388] usb 3-5: new high-speed USB device number 58 using xhci_hcd
[28177.318421] usb 3-5: Device not responding to set address.
[28177.522702] usb 3-5: Device not responding to set address.
[28177.726961] usb 3-5: device not accepting address 58, error -71
[28392.436949] usb 3-5: new high-speed USB device number 51 using xhci_hcd
[28392.436975] usb 3-5: Device not responding to set address.
[28392.641286] usb 3-5: Device not responding to set address.
[28392.845578] usb 3-5: device not accepting address 51, error -71
[28884.897109] usb 3-5: new high-speed USB device number 76 using xhci_hcd
[28884.897145] usb 3-5: Device not responding to set address.
[28885.101463] usb 3-5: Device not responding to set address.
[28885.309736] usb 3-5: device not accepting address 76, error -71
[28892.344025] usb 3-5: new high-speed USB device number 109 using xhci_hcd
[28892.344073] usb 3-5: Device not responding to set address.
[28892.548384] usb 3-5: Device not responding to set address.
[28892.752604] usb 3-5: device not accepting address 109, error -71
[28906.276375] usb 3-5: new high-speed USB device number 47 using xhci_hcd
[28906.276408] usb 3-5: Device not responding to set address.
[28906.480688] usb 3-5: Device not responding to set address.
[28906.684978] usb 3-5: device not accepting address 47, error -71
[28979.699783] usb 3-5: new high-speed USB device number 10 using xhci_hcd
[28979.699836] usb 3-5: Device not responding to set address.
[28979.904128] usb 3-5: Device not responding to set address.
[28980.108380] usb 3-5: device not accepting address 10, error -71
[29015.704438] usb 3-5: new high-speed USB device number 50 using xhci_hcd
[29015.704480] usb 3-5: Device not responding to set address.
[29015.908765] usb 3-5: Device not responding to set address.
[29016.112994] usb 3-5: device not accepting address 50, error -71
[29040.244323] usb 3-5: new high-speed USB device number 37 using xhci_hcd
[29040.244430] usb 3-5: Device not responding to set address.
[29040.448551] usb 3-5: Device not responding to set address.
[29040.652871] usb 3-5: device not accepting address 37, error -71
[29052.472787] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[29052.484084] JFS: nTxBlock = 8192, nTxLock = 65536
[29052.501947] NTFS driver 2.1.30 [Flags: R/O MODULE].
[29052.524702] QNX4 filesystem 0.2.3 registered.
[29052.535493] xor: automatically using best checksumming function:
[29052.574259]    avx       : 35100.000 MB/sec
[29052.642370] raid6: mmxx1     3126 MB/s
[29052.710486] raid6: mmxx2     1549 MB/s
[29052.778587] raid6: sse1x1    1282 MB/s
[29052.846683] raid6: sse1x2    1857 MB/s
[29052.914779] raid6: sse2x1    2383 MB/s
[29052.982867] raid6: sse2x2    3168 MB/s
[29053.050969] raid6: avx2x1    7108 MB/s
[29053.119069] raid6: avx2x2    5683 MB/s
[29053.119074] raid6: using algorithm avx2x1 (7108 MB/s)
[29053.119077] raid6: using avx2x1 recovery algorithm
[29053.188149] bio: create slab <bio-1> at 1
[29053.188730] Btrfs loaded
[29063.045668] usb 3-5: new high-speed USB device number 16 using xhci_hcd
[29063.045723] usb 3-5: Device not responding to set address.
[29063.249962] usb 3-5: Device not responding to set address.
[29063.454262] usb 3-5: device not accepting address 16, error -71
[29073.949614] usb 3-5: new high-speed USB device number 65 using xhci_hcd
[29073.949665] usb 3-5: Device not responding to set address.
[29074.153919] usb 3-5: Device not responding to set address.
[29074.358206] usb 3-5: device not accepting address 65, error -71
[29145.434093] usb 3-5: new high-speed USB device number 19 using xhci_hcd
[29145.434148] usb 3-5: Device not responding to set address.
[29145.638438] usb 3-5: Device not responding to set address.
[29145.842682] usb 3-5: device not accepting address 19, error -71
[29691.304396] usb 3-2: new full-speed USB device number 41 using xhci_hcd
[29691.322438] usb 3-2: New USB device found, idVendor=03f0, idProduct=7e04
[29691.322447] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[29691.322453] usb 3-2: Product: Deskjet F4100 series
[29691.322458] usb 3-2: Manufacturer: HP
[29691.322462] usb 3-2: SerialNumber: CN86M7V09N04TJ
[29691.322750] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[29691.322782] usb 3-2: ep 0x84 - rounding interval to 64 microframes, ep desc says 80 microframes
[29691.322808] usb 3-2: ep 0x88 - rounding interval to 64 microframes, ep desc says 80 microframes
[29691.522539] WARNING! power/level is deprecated; use power/control instead
[29691.527937] usb 3-2: ep 0x84 - rounding interval to 64 microframes, ep desc says 80 microframes
[29694.567552] type=1400 audit(1479938233.733:65): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=19446 comm="cups-deviced" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
[29694.567557] type=1400 audit(1479938233.733:66): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=19446 comm="cups-deviced" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
[29694.567565] type=1400 audit(1479938233.733:67): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=19446 comm="cups-deviced" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
[29694.569593] type=1400 audit(1479938233.737:68): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=2680 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
[29694.569599] type=1400 audit(1479938233.737:69): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=2680 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
[29694.569603] type=1400 audit(1479938233.737:70): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=2680 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
[29694.591229] usb 3-2: ep 0x84 - rounding interval to 64 microframes, ep desc says 80 microframes
[29694.592053] usblp 3-2:1.1: usblp1: USB Bidirectional printer dev 41 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7E04
[29694.592074] usbcore: registered new interface driver usblp
[29872.473327] usb 3-5: new high-speed USB device number 8 using xhci_hcd
[29872.473400] usb 3-5: Device not responding to set address.
[29872.677676] usb 3-5: Device not responding to set address.
[29872.881856] usb 3-5: device not accepting address 8, error -71
[29924.261068] INFO: task upowerd:1393 blocked for more than 120 seconds.
[29924.261078]       Not tainted 3.13.0-101-generic #148-Ubuntu
[29924.261082] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[29924.261087] upowerd         D c12af60a     0  1393      1 0x00000000
[29924.261097]  efe97eb8 00000082 c1187ed5 c12af60a 000080d0 c1aa3300 c1aa3300 f3502700
[29924.261111]  efe97ef4 f3502700 f69e4e00 f7be5300 f6c681c8 efe97e78 c1304130 f6c68180
[29924.261123]  efe97e90 c1190bce 00000000 efe97ef4 efe97e90 c1198d4d efe97ee0 c118a740
[29924.261136] Call Trace:
[29924.261152]  [<c1187ed5>] ? link_path_walk+0x1e5/0x6d0
[29924.261161]  [<c12af60a>] ? apparmor_file_alloc_security+0x4a/0x130
[29924.261171]  [<c1304130>] ? lockref_put_or_lock+0x20/0x30
[29924.261181]  [<c1190bce>] ? dput+0x1e/0x160
[29924.261190]  [<c1198d4d>] ? mntput+0x1d/0x30
[29924.261196]  [<c118a740>] ? path_openat+0x120/0x520
[29924.261206]  [<c1662c73>] schedule_preempt_disabled+0x23/0x60
[29924.261213]  [<c16645bd>] __mutex_lock_slowpath+0x10d/0x171
[29924.261226]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[29924.261232]  [<c1663aec>] mutex_lock+0x1c/0x28
[29924.261240]  [<c14bb2e0>] read_descriptors+0x20/0x100
[29924.261248]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[29924.261257]  [<c11e009e>] sysfs_bin_read+0xde/0x250
[29924.261264]  [<c11dffc0>] ? sysfs_write_file+0x1c0/0x1c0
[29924.261271]  [<c117cee8>] vfs_read+0x78/0x140
[29924.261278]  [<c117d669>] SyS_read+0x49/0x90
[29924.261287]  [<c166d08d>] sysenter_do_call+0x12/0x12
[29924.261367] INFO: task hpfax:19450 blocked for more than 120 seconds.
[29924.261371]       Not tainted 3.13.0-101-generic #148-Ubuntu
[29924.261374] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[29924.261377] hpfax           D c12af60a     0 19450      1 0x00000000
[29924.261384]  d2ee1eb8 00200086 c1187ed5 c12af60a 000080d0 c1aa3300 c1aa3300 f3500d00
[29924.261397]  d2ee1ef4 f3500d00 f05d9a00 f7bc9300 f3a9b300 d2f99800 f3401a80 d2ee1edc
[29924.261408]  00200292 8010000d 00000000 80100010 c11e0041 000000d0 d2ee1ee0 c118a740
[29924.261421] Call Trace:
[29924.261428]  [<c1187ed5>] ? link_path_walk+0x1e5/0x6d0
[29924.261434]  [<c12af60a>] ? apparmor_file_alloc_security+0x4a/0x130
[29924.261442]  [<c11e0041>] ? sysfs_bin_read+0x81/0x250
[29924.261448]  [<c118a740>] ? path_openat+0x120/0x520
[29924.261455]  [<c1662c73>] schedule_preempt_disabled+0x23/0x60
[29924.261462]  [<c16645bd>] __mutex_lock_slowpath+0x10d/0x171
[29924.261470]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[29924.261476]  [<c1663aec>] mutex_lock+0x1c/0x28
[29924.261483]  [<c14bb2e0>] read_descriptors+0x20/0x100
[29924.261491]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[29924.261497]  [<c11e009e>] sysfs_bin_read+0xde/0x250
[29924.261504]  [<c11dffc0>] ? sysfs_write_file+0x1c0/0x1c0
[29924.261510]  [<c117cee8>] vfs_read+0x78/0x140
[29924.261517]  [<c117d669>] SyS_read+0x49/0x90
[29924.261524]  [<c166d08d>] sysenter_do_call+0x12/0x12
[29924.261529] INFO: task usb:19451 blocked for more than 120 seconds.
[29924.261533]       Not tainted 3.13.0-101-generic #148-Ubuntu
[29924.261536] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[29924.261539] usb             D c12af60a     0 19451      1 0x00000004
[29924.261545]  dabd1eb8 00000082 c1187ed5 c12af60a 000080d0 c1aa3300 c1aa3300 f3500d00
[29924.261557]  dabd1ef4 f3500d00 f05ddb00 f7bc9300 f6c681c8 dabd1e78 c1304130 f6c68180
[29924.261569]  dabd1e90 c1190bce 00000000 dabd1ef4 dabd1e90 c1198d4d dabd1ee0 c118a740
[29924.261580] Call Trace:
[29924.261587]  [<c1187ed5>] ? link_path_walk+0x1e5/0x6d0
[29924.261593]  [<c12af60a>] ? apparmor_file_alloc_security+0x4a/0x130
[29924.261601]  [<c1304130>] ? lockref_put_or_lock+0x20/0x30
[29924.261609]  [<c1190bce>] ? dput+0x1e/0x160
[29924.261617]  [<c1198d4d>] ? mntput+0x1d/0x30
[29924.261623]  [<c118a740>] ? path_openat+0x120/0x520
[29924.261629]  [<c1662c73>] schedule_preempt_disabled+0x23/0x60
[29924.261635]  [<c16645bd>] __mutex_lock_slowpath+0x10d/0x171
[29924.261643]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[29924.261649]  [<c1663aec>] mutex_lock+0x1c/0x28
[29924.261656]  [<c14bb2e0>] read_descriptors+0x20/0x100
[29924.261664]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[29924.261670]  [<c11e009e>] sysfs_bin_read+0xde/0x250
[29924.261678]  [<c11dffc0>] ? sysfs_write_file+0x1c0/0x1c0
[29924.261684]  [<c117cee8>] vfs_read+0x78/0x140
[29924.261690]  [<c117d669>] SyS_read+0x49/0x90
[29924.261697]  [<c166d08d>] sysenter_do_call+0x12/0x12
[29924.261702] INFO: task hp:19452 blocked for more than 120 seconds.
[29924.261705]       Not tainted 3.13.0-101-generic #148-Ubuntu
[29924.261708] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[29924.261711] hp              D c12af60a     0 19452      1 0x00000000
[29924.261717]  effdfeb8 00200086 c1187ed5 c12af60a 000080d0 c1aa3300 c1aa3300 56dc4942
[29924.261729]  00001b01 df94a700 df94e800 f7be5300 f6c681c8 effdfe78 c1304130 f6c68180
[29924.261740]  effdfe90 c1190bce 00000000 effdfef4 effdfe90 c1198d4d effdfee0 c118a740
[29924.261752] Call Trace:
[29924.261758]  [<c1187ed5>] ? link_path_walk+0x1e5/0x6d0
[29924.261765]  [<c12af60a>] ? apparmor_file_alloc_security+0x4a/0x130
[29924.261772]  [<c1304130>] ? lockref_put_or_lock+0x20/0x30
[29924.261780]  [<c1190bce>] ? dput+0x1e/0x160
[29924.261787]  [<c1198d4d>] ? mntput+0x1d/0x30
[29924.261794]  [<c118a740>] ? path_openat+0x120/0x520
[29924.261800]  [<c1662c73>] schedule_preempt_disabled+0x23/0x60
[29924.261806]  [<c16645bd>] __mutex_lock_slowpath+0x10d/0x171
[29924.261814]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[29924.261820]  [<c1663aec>] mutex_lock+0x1c/0x28
[29924.261828]  [<c14bb2e0>] read_descriptors+0x20/0x100
[29924.261835]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[29924.261842]  [<c11e009e>] sysfs_bin_read+0xde/0x250
[29924.261849]  [<c11dffc0>] ? sysfs_write_file+0x1c0/0x1c0
[29924.261855]  [<c117cee8>] vfs_read+0x78/0x140
[29924.261861]  [<c117d669>] SyS_read+0x49/0x90
[29924.261868]  [<c166d08d>] sysenter_do_call+0x12/0x12
[30044.436728] INFO: task upowerd:1393 blocked for more than 120 seconds.
[30044.436732]       Not tainted 3.13.0-101-generic #148-Ubuntu
[30044.436733] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[30044.436735] upowerd         D c12af60a     0  1393      1 0x00000000
[30044.436738]  efe97eb8 00000082 c1187ed5 c12af60a 000080d0 c1aa3300 c1aa3300 f3502700
[30044.436750]  efe97ef4 f3502700 f69e4e00 f7be5300 f6c681c8 efe97e78 c1304130 f6c68180
[30044.436754]  efe97e90 c1190bce 00000000 efe97ef4 efe97e90 c1198d4d efe97ee0 c118a740
[30044.436758] Call Trace:
[30044.436765]  [<c1187ed5>] ? link_path_walk+0x1e5/0x6d0
[30044.436768]  [<c12af60a>] ? apparmor_file_alloc_security+0x4a/0x130
[30044.436771]  [<c1304130>] ? lockref_put_or_lock+0x20/0x30
[30044.436773]  [<c1190bce>] ? dput+0x1e/0x160
[30044.436775]  [<c1198d4d>] ? mntput+0x1d/0x30
[30044.436777]  [<c118a740>] ? path_openat+0x120/0x520
[30044.436780]  [<c1662c73>] schedule_preempt_disabled+0x23/0x60
[30044.436782]  [<c16645bd>] __mutex_lock_slowpath+0x10d/0x171
[30044.436785]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[30044.436786]  [<c1663aec>] mutex_lock+0x1c/0x28
[30044.436788]  [<c14bb2e0>] read_descriptors+0x20/0x100
[30044.436790]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[30044.436792]  [<c11e009e>] sysfs_bin_read+0xde/0x250
[30044.436794]  [<c11dffc0>] ? sysfs_write_file+0x1c0/0x1c0
[30044.436796]  [<c117cee8>] vfs_read+0x78/0x140
[30044.436798]  [<c117d669>] SyS_read+0x49/0x90
[30044.436800]  [<c166d08d>] sysenter_do_call+0x12/0x12
[30044.436837] INFO: task hpfax:19450 blocked for more than 120 seconds.
[30044.436838]       Not tainted 3.13.0-101-generic #148-Ubuntu
[30044.436838] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[30044.436839] hpfax           D c12af60a     0 19450      1 0x00000000
[30044.436841]  d2ee1eb8 00200086 c1187ed5 c12af60a 000080d0 c1aa3300 c1aa3300 f3500d00
[30044.436844]  d2ee1ef4 f3500d00 f05d9a00 f7bc9300 f3a9b300 d2f99800 f3401a80 d2ee1edc
[30044.436846]  00200292 8010000d 00000000 80100010 c11e0041 000000d0 d2ee1ee0 c118a740
[30044.436849] Call Trace:
[30044.436851]  [<c1187ed5>] ? link_path_walk+0x1e5/0x6d0
[30044.436853]  [<c12af60a>] ? apparmor_file_alloc_security+0x4a/0x130
[30044.436855]  [<c11e0041>] ? sysfs_bin_read+0x81/0x250
[30044.436857]  [<c118a740>] ? path_openat+0x120/0x520
[30044.436858]  [<c1662c73>] schedule_preempt_disabled+0x23/0x60
[30044.436860]  [<c16645bd>] __mutex_lock_slowpath+0x10d/0x171
[30044.436863]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[30044.436864]  [<c1663aec>] mutex_lock+0x1c/0x28
[30044.436866]  [<c14bb2e0>] read_descriptors+0x20/0x100
[30044.436867]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[30044.436869]  [<c11e009e>] sysfs_bin_read+0xde/0x250
[30044.436871]  [<c11dffc0>] ? sysfs_write_file+0x1c0/0x1c0
[30044.436872]  [<c117cee8>] vfs_read+0x78/0x140
[30044.436874]  [<c117d669>] SyS_read+0x49/0x90
[30044.436876]  [<c166d08d>] sysenter_do_call+0x12/0x12
[30044.436877] INFO: task usb:19451 blocked for more than 120 seconds.
[30044.436878]       Not tainted 3.13.0-101-generic #148-Ubuntu
[30044.436879] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[30044.436879] usb             D c12af60a     0 19451      1 0x00000004
[30044.436882]  dabd1eb8 00000082 c1187ed5 c12af60a 000080d0 c1aa3300 c1aa3300 f3500d00
[30044.436884]  dabd1ef4 f3500d00 f05ddb00 f7bc9300 f6c681c8 dabd1e78 c1304130 f6c68180
[30044.436887]  dabd1e90 c1190bce 00000000 dabd1ef4 dabd1e90 c1198d4d dabd1ee0 c118a740
[30044.436890] Call Trace:
[30044.436891]  [<c1187ed5>] ? link_path_walk+0x1e5/0x6d0
[30044.436893]  [<c12af60a>] ? apparmor_file_alloc_security+0x4a/0x130
[30044.436895]  [<c1304130>] ? lockref_put_or_lock+0x20/0x30
[30044.436897]  [<c1190bce>] ? dput+0x1e/0x160
[30044.436899]  [<c1198d4d>] ? mntput+0x1d/0x30
[30044.436901]  [<c118a740>] ? path_openat+0x120/0x520
[30044.436902]  [<c1662c73>] schedule_preempt_disabled+0x23/0x60
[30044.436904]  [<c16645bd>] __mutex_lock_slowpath+0x10d/0x171
[30044.436906]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[30044.436907]  [<c1663aec>] mutex_lock+0x1c/0x28
[30044.436909]  [<c14bb2e0>] read_descriptors+0x20/0x100
[30044.436910]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[30044.436912]  [<c11e009e>] sysfs_bin_read+0xde/0x250
[30044.436914]  [<c11dffc0>] ? sysfs_write_file+0x1c0/0x1c0
[30044.436915]  [<c117cee8>] vfs_read+0x78/0x140
[30044.436917]  [<c117d669>] SyS_read+0x49/0x90
[30044.436918]  [<c166d08d>] sysenter_do_call+0x12/0x12
[30044.436920] INFO: task hp:19452 blocked for more than 120 seconds.
[30044.436921]       Not tainted 3.13.0-101-generic #148-Ubuntu
[30044.436921] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[30044.436922] hp              D c12af60a     0 19452      1 0x00000000
[30044.436923]  effdfeb8 00200086 c1187ed5 c12af60a 000080d0 c1aa3300 c1aa3300 56dc4942
[30044.436926]  00001b01 df94a700 df94e800 f7be5300 f6c681c8 effdfe78 c1304130 f6c68180
[30044.436929]  effdfe90 c1190bce 00000000 effdfef4 effdfe90 c1198d4d effdfee0 c118a740
[30044.436932] Call Trace:
[30044.436933]  [<c1187ed5>] ? link_path_walk+0x1e5/0x6d0
[30044.436935]  [<c12af60a>] ? apparmor_file_alloc_security+0x4a/0x130
[30044.436936]  [<c1304130>] ? lockref_put_or_lock+0x20/0x30
[30044.436939]  [<c1190bce>] ? dput+0x1e/0x160
[30044.436940]  [<c1198d4d>] ? mntput+0x1d/0x30
[30044.436942]  [<c118a740>] ? path_openat+0x120/0x520
[30044.436943]  [<c1662c73>] schedule_preempt_disabled+0x23/0x60
[30044.436945]  [<c16645bd>] __mutex_lock_slowpath+0x10d/0x171
[30044.436947]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[30044.436948]  [<c1663aec>] mutex_lock+0x1c/0x28
[30044.436950]  [<c14bb2e0>] read_descriptors+0x20/0x100
[30044.436951]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[30044.436953]  [<c11e009e>] sysfs_bin_read+0xde/0x250
[30044.436955]  [<c11dffc0>] ? sysfs_write_file+0x1c0/0x1c0
[30044.436956]  [<c117cee8>] vfs_read+0x78/0x140
[30044.436957]  [<c117d669>] SyS_read+0x49/0x90
[30044.436959]  [<c166d08d>] sysenter_do_call+0x12/0x12
[30164.612496] INFO: task upowerd:1393 blocked for more than 120 seconds.
[30164.612508]       Not tainted 3.13.0-101-generic #148-Ubuntu
[30164.612513] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[30164.612519] upowerd         D c12af60a     0  1393      1 0x00000000
[30164.612533]  efe97eb8 00000082 c1187ed5 c12af60a 000080d0 c1aa3300 c1aa3300 f3502700
[30164.612552]  efe97ef4 f3502700 f69e4e00 f7be5300 f6c681c8 efe97e78 c1304130 f6c68180
[30164.612569]  efe97e90 c1190bce 00000000 efe97ef4 efe97e90 c1198d4d efe97ee0 c118a740
[30164.612587] Call Trace:
[30164.612606]  [<c1187ed5>] ? link_path_walk+0x1e5/0x6d0
[30164.612619]  [<c12af60a>] ? apparmor_file_alloc_security+0x4a/0x130
[30164.612631]  [<c1304130>] ? lockref_put_or_lock+0x20/0x30
[30164.612643]  [<c1190bce>] ? dput+0x1e/0x160
[30164.612655]  [<c1198d4d>] ? mntput+0x1d/0x30
[30164.612664]  [<c118a740>] ? path_openat+0x120/0x520
[30164.612676]  [<c1662c73>] schedule_preempt_disabled+0x23/0x60
[30164.612687]  [<c16645bd>] __mutex_lock_slowpath+0x10d/0x171
[30164.612701]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[30164.612711]  [<c1663aec>] mutex_lock+0x1c/0x28
[30164.612721]  [<c14bb2e0>] read_descriptors+0x20/0x100
[30164.612732]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[30164.612743]  [<c11e009e>] sysfs_bin_read+0xde/0x250
[30164.612755]  [<c11dffc0>] ? sysfs_write_file+0x1c0/0x1c0
[30164.612765]  [<c117cee8>] vfs_read+0x78/0x140
[30164.612775]  [<c117d669>] SyS_read+0x49/0x90
[30164.612784]  [<c166d08d>] sysenter_do_call+0x12/0x12
[30164.612863] INFO: task hpfax:19450 blocked for more than 120 seconds.
[30164.612868]       Not tainted 3.13.0-101-generic #148-Ubuntu
[30164.612871] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[30164.612875] hpfax           D c12af60a     0 19450      1 0x00000000
[30164.612882]  d2ee1eb8 00200086 c1187ed5 c12af60a 000080d0 c1aa3300 c1aa3300 f3500d00
[30164.612895]  d2ee1ef4 f3500d00 f05d9a00 f7bc9300 f3a9b300 d2f99800 f3401a80 d2ee1edc
[30164.612907]  00200292 8010000d 00000000 80100010 c11e0041 000000d0 d2ee1ee0 c118a740
[30164.612919] Call Trace:
[30164.612926]  [<c1187ed5>] ? link_path_walk+0x1e5/0x6d0
[30164.612934]  [<c12af60a>] ? apparmor_file_alloc_security+0x4a/0x130
[30164.612941]  [<c11e0041>] ? sysfs_bin_read+0x81/0x250
[30164.612948]  [<c118a740>] ? path_openat+0x120/0x520
[30164.612955]  [<c1662c73>] schedule_preempt_disabled+0x23/0x60
[30164.612962]  [<c16645bd>] __mutex_lock_slowpath+0x10d/0x171
[30164.612970]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[30164.612976]  [<c1663aec>] mutex_lock+0x1c/0x28
[30164.612984]  [<c14bb2e0>] read_descriptors+0x20/0x100
[30164.612992]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[30164.612998]  [<c11e009e>] sysfs_bin_read+0xde/0x250
[30164.613005]  [<c11dffc0>] ? sysfs_write_file+0x1c0/0x1c0
[30164.613012]  [<c117cee8>] vfs_read+0x78/0x140
[30164.613019]  [<c117d669>] SyS_read+0x49/0x90
[30164.613026]  [<c166d08d>] sysenter_do_call+0x12/0x12
[31083.024326] init: smbd main process (646) killed by TERM signal
[31086.284409] init: samba-ad-dc main process (21430) terminated with status 1
utilisateur@PCI3:~$

C)

dmesg | head -1200 | tail -500

 [    1.295651] sd 0:0:0:0: [sda] Write Protect is off
[    1.295653] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.295664] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.295728] scsi 1:0:0:0: Direct-Access     ATA      ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
[    1.295831] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.295833] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.295854] sd 1:0:0:0: [sdb] Write Protect is off
[    1.295857] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.295859] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.295867] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.296066]  sda: sda1 sda2 < sda5 >
[    1.296349] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.297670] scsi 4:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224DB  SB01 PQ: 0 ANSI: 5
[    1.300622] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.300623] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.300704] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.300754] sr 4:0:0:0: Attached scsi generic sg2 type 5
[    1.341252]  sdb: sdb1
[    1.341360] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.375799] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    1.375801] EXT4-fs (sda1): write access will be enabled during recovery
[    1.439660] EXT4-fs (sda1): orphan cleanup on readonly fs
[    1.450322] usb 3-8: new full-speed USB device number 3 using xhci_hcd
[    1.457820] EXT4-fs (sda1): 31 orphan inodes deleted
[    1.457821] EXT4-fs (sda1): recovery complete
[    1.458994] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.468747] usb 3-8: New USB device found, idVendor=046d, idProduct=c52f
[    1.468761] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.468762] usb 3-8: Product: USB Receiver
[    1.468763] usb 3-8: Manufacturer: Logitech
[    1.474351] tsc: Refined TSC clocksource calibration: 3499.999 MHz
[    1.533751] random: init urandom read with 65 bits of entropy available
[    1.553508] init: plymouth-upstart-bridge main process (182) terminated with status 1
[    1.553517] init: plymouth-upstart-bridge main process ended, respawning
[    1.555380] init: plymouth-upstart-bridge main process (193) terminated with status 1
[    1.555387] init: plymouth-upstart-bridge main process ended, respawning
[    1.556906] init: plymouth-upstart-bridge main process (195) terminated with status 1
[    1.556914] init: plymouth-upstart-bridge main process ended, respawning
[    1.558642] init: plymouth-upstart-bridge main process (196) terminated with status 1
[    1.558651] init: plymouth-upstart-bridge main process ended, respawning
[    1.560561] init: plymouth-upstart-bridge main process (198) terminated with status 1
[    1.560571] init: plymouth-upstart-bridge main process ended, respawning
[    1.582513] usb 5-1: new low-speed USB device number 2 using xhci_hcd
[    1.634346] usb 5-1: New USB device found, idVendor=040b, idProduct=2000
[    1.634350] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.634352] usb 5-1: Product: USB Keyboard
[    1.634354] usb 5-1: Manufacturer: Generic
[    1.634426] usb 5-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
[    1.634430] usb 5-1: ep 0x82 - rounding interval to 256 microframes, ep desc says 384 microframes
[    1.638601] Adding 4058108k swap on /dev/sda5.  Priority:-1 extents:1 across:4058108k SSFS
[    1.697630] systemd-udevd[307]: starting version 204
[    1.749027] usb 5-2: new high-speed USB device number 3 using xhci_hcd
[    1.759787] mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
[    1.759902] parport_pc 00:0a: reported by Plug and Play ACPI
[    1.759947] parport0: PC-style at 0x378, irq 5 [PCSPP]
[    1.760449] lp: driver loaded but no devices found
[    1.762941] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.769241] wmi: Mapper loaded
[    1.785477] [drm] Initialized drm 1.1.0 20060810
[    1.787837] ppdev: user-space parallel port driver
[    1.855025] lp0: using parport0 (interrupt-driven).
[    1.867031] systemd-udevd[333]: renamed network interface eth0 to eth1
[    1.896178] type=1400 audit(1479908584.488:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=388 comm="apparmor_parser"
[    1.896183] type=1400 audit(1479908584.488:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=388 comm="apparmor_parser"
[    1.896185] type=1400 audit(1479908584.488:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=388 comm="apparmor_parser"
[    1.896452] type=1400 audit(1479908584.488:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=388 comm="apparmor_parser"
[    1.896455] type=1400 audit(1479908584.488:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=388 comm="apparmor_parser"
[    1.896591] type=1400 audit(1479908584.488:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=388 comm="apparmor_parser"
[    1.913918] [drm] Memory usable by graphics device = 2048M
[    1.913925] checking generic (e0000000 580000) vs hw (e0000000 10000000)
[    1.913927] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    1.913963] Console: switching to colour dummy device 80x25
[    1.939129] i915 0000:00:02.0: irq 50 for MSI/MSI-X
[    1.939140] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.939141] [drm] Driver supports precise vblank timestamp query.
[    1.939230] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.948287] hidraw: raw HID events driver (C) Jiri Kosina
[    1.991593] usb 5-2: New USB device found, idVendor=046d, idProduct=0825
[    1.991598] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[    1.991600] usb 5-2: SerialNumber: A76DA720
[    1.991649] fbcon: inteldrmfb (fb0) is primary device
[    2.008052] usbcore: registered new interface driver usbhid
[    2.008053] usbhid: USB HID core driver
[    2.023430] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input6
[    2.032142] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-8/input0
[    2.032901] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.1/input/input7
[    2.033028] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-8/input1
[    2.033123] input: Generic USB Keyboard as /devices/pci0000:00/0000:00:1c.5/0000:06:00.0/usb5/5-1/5-1:1.0/input/input8
[    2.038693] hid-generic 0003:040B:2000.0003: input,hidraw2: USB HID v1.10 Keyboard [Generic USB Keyboard] on usb-0000:06:00.0-1/input0
[    2.042228] Linux video capture interface: v2.00
[    2.085226] input: Generic USB Keyboard as /devices/pci0000:00/0000:00:1c.5/0000:06:00.0/usb5/5-1/5-1:1.1/input/input9
[    2.085348] hid-generic 0003:040B:2000.0004: input,hidraw3: USB HID v1.10 Mouse [Generic USB Keyboard] on usb-0000:06:00.0-1/input1
[    2.147500] Console: switching to colour frame buffer device 200x56
[    2.152462] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.152464] i915 0000:00:02.0: registered panic notifier
[    2.164141] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    2.168306] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.168698] acpi device:17: registered as cooling_device10
[    2.168778] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    2.170342] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.170597] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[    2.180056] HDA driver get symbol successfully from i915 module
[    2.180085] snd_hda_intel 0000:00:03.0: irq 52 for MSI/MSI-X
[    2.194892] SKU: Nid=0x1d sku_cfg=0x4025c603
[    2.194894] SKU: port_connectivity=0x1
[    2.194896] SKU: enable_pcbeep=0x0
[    2.194897] SKU: check_sum=0x00000005
[    2.194898] SKU: customization=0x000000c6
[    2.194899] SKU: external_amp=0x0
[    2.194899] SKU: platform_type=0x0
[    2.194900] SKU: swap=0x1
[    2.194901] SKU: override=0x1
[    2.195139] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    2.195140]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.195141]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.195141]    mono: mono_out=0x0
[    2.195142]    inputs:
[    2.195143]      Front Mic=0x19
[    2.195144]      Rear Mic=0x18
[    2.195145]      Line=0x1a
[    2.195146] realtek: No valid SSID, checking pincfg 0x4025c603 for NID 0x1d
[    2.195146] realtek: Enabling init ASM_ID=0xc603 CODEC_ID=10ec0887
[    2.202938] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[    2.203000] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[    2.203051] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[    2.219934] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card2/input18
[    2.220063] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card2/input17
[    2.220167] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card2/input16
[    2.220290] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input15
[    2.220393] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input14
[    2.297651] random: nonblocking pool is initialized
[    2.324564] init: failsafe main process (660) killed by TERM signal
[    2.425059] type=1400 audit(1479908585.016:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=732 comm="apparmor_parser"
[    2.425066] type=1400 audit(1479908585.016:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=732 comm="apparmor_parser"
[    2.425454] type=1400 audit(1479908585.016:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=732 comm="apparmor_parser"
[    2.425928] Bluetooth: Core ver 2.17
[    2.425964] NET: Registered protocol family 31
[    2.425966] Bluetooth: HCI device and connection manager initialized
[    2.425972] Bluetooth: HCI socket layer initialized
[    2.425973] Bluetooth: L2CAP socket layer initialized
[    2.425977] Bluetooth: SCO socket layer initialized
[    2.444670] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.444673] Bluetooth: BNEP filters: protocol multicast
[    2.444679] Bluetooth: BNEP socket layer initialized
[    2.448830] Bluetooth: RFCOMM TTY layer initialized
[    2.448838] Bluetooth: RFCOMM socket layer initialized
[    2.448843] Bluetooth: RFCOMM ver 1.11
[    2.462773] init: cups main process (738) killed by HUP signal
[    2.462782] init: cups main process ended, respawning
[    2.476201] Switched to clocksource tsc
[    2.519829] init: samba-ad-dc main process (763) terminated with status 1
[    2.582088] r8169 0000:03:00.0 eth1: link down
[    2.582117] r8169 0000:03:00.0 eth1: link down
[    2.582171] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    3.233242] init: plymouth-upstart-bridge main process ended, respawning
[    3.237883] init: plymouth-upstart-bridge main process (1144) terminated with status 1
[    3.237891] init: plymouth-upstart-bridge main process ended, respawning
[    3.359167] set resolution quirk: cval->res = 384
[    3.359330] usbcore: registered new interface driver snd-usb-audio
[    3.359342] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825)
[    3.374669] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:1c.5/0000:06:00.0/usb5/5-2/5-2:1.0/input/input19
[    3.374768] usbcore: registered new interface driver uvcvideo
[    3.374770] USB Video Class driver (1.1.1)
[    3.797840] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    4.350925] r8169 0000:03:00.0 eth1: link up
[    4.350934] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[    5.814834] show_signal_msg: 153 callbacks suppressed
[    5.814838] compiz[1568]: segfault at 0 ip   (null) sp bfe1313c error 14 in compiz[8048000+3000]
[   32.535917] type=1400 audit(1479908615.077:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2679 comm="apparmor_parser"
[   32.535922] type=1400 audit(1479908615.077:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2679 comm="apparmor_parser"
[   32.536184] type=1400 audit(1479908615.077:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2679 comm="apparmor_parser"
[  528.502309] usb 3-5: new high-speed USB device number 48 using xhci_hcd
[  528.502368] usb 3-5: Device not responding to set address.
[  528.706680] usb 3-5: Device not responding to set address.
[  528.910929] usb 3-5: device not accepting address 48, error -71
[ 9659.094408] usb 3-5: new high-speed USB device number 125 using xhci_hcd
[ 9659.094442] usb 3-5: Device not responding to set address.
[ 9659.298692] usb 3-5: Device not responding to set address.
[ 9659.502993] usb 3-5: device not accepting address 125, error -71
[13053.420019] perf samples too long (2576 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[15064.703242] usb 3-5: new high-speed USB device number 109 using xhci_hcd
[15064.703291] usb 3-5: Device not responding to set address.
[15064.907615] usb 3-5: Device not responding to set address.
[15065.111835] usb 3-5: device not accepting address 109, error -71
[15218.163671] usb 3-5: new high-speed USB device number 67 using xhci_hcd
[15218.163721] usb 3-5: Device not responding to set address.
[15218.368031] usb 3-5: Device not responding to set address.
[15218.572280] usb 3-5: device not accepting address 67, error -71
[16451.985085] systemd-hostnamed[6925]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[17178.036733] systemd-hostnamed[7068]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[20039.101492] usb 3-5: new high-speed USB device number 99 using xhci_hcd
[20039.101527] usb 3-5: Device not responding to set address.
[20039.305877] usb 3-5: Device not responding to set address.
[20039.510105] usb 3-5: device not accepting address 99, error -71
[20104.753523] usb 3-5: new high-speed USB device number 26 using xhci_hcd
[20104.753567] usb 3-5: Device not responding to set address.
[20104.957874] usb 3-5: Device not responding to set address.
[20105.162121] usb 3-5: device not accepting address 26, error -71
[22988.061945] usb 3-5: new high-speed USB device number 100 using xhci_hcd
[22988.061996] usb 3-5: Device not responding to set address.
[22988.266235] usb 3-5: Device not responding to set address.
[22988.470534] usb 3-5: device not accepting address 100, error -71
[24798.277075] usb 3-5: new high-speed USB device number 89 using xhci_hcd
[24798.277094] usb 3-5: Device not responding to set address.
[24798.481400] usb 3-5: Device not responding to set address.
[24798.685704] usb 3-5: device not accepting address 89, error -71
[25451.945006] usb 3-5: new high-speed USB device number 109 using xhci_hcd
[25451.945051] usb 3-5: Device not responding to set address.
[25452.149303] usb 3-5: Device not responding to set address.
[25452.353559] usb 3-5: device not accepting address 109, error -71
[25624.461261] usb 3-5: new high-speed USB device number 30 using xhci_hcd
[25624.461354] usb 3-5: Device not responding to set address.
[25624.665526] usb 3-5: Device not responding to set address.
[25624.869812] usb 3-5: device not accepting address 30, error -71
[25869.259182] usb 3-5: new high-speed USB device number 35 using xhci_hcd
[25869.259208] usb 3-5: Device not responding to set address.
[25869.463492] usb 3-5: Device not responding to set address.
[25869.667778] usb 3-5: device not accepting address 35, error -71
[26071.651200] usb 3-5: new high-speed USB device number 94 using xhci_hcd
[26071.651262] usb 3-5: Device not responding to set address.
[26071.855508] usb 3-5: Device not responding to set address.
[26072.059768] usb 3-5: device not accepting address 94, error -71
[26142.486758] usb 3-5: new high-speed USB device number 45 using xhci_hcd
[26142.486796] usb 3-5: Device not responding to set address.
[26142.691105] usb 3-5: Device not responding to set address.
[26142.895342] usb 3-5: device not accepting address 45, error -71
[26231.921555] usb 3-5: new high-speed USB device number 82 using xhci_hcd
[26231.921581] usb 3-5: Device not responding to set address.
[26232.125850] usb 3-5: Device not responding to set address.
[26232.330128] usb 3-5: device not accepting address 82, error -71
[26306.883127] usb 3-5: new high-speed USB device number 52 using xhci_hcd
[26306.883170] usb 3-5: Device not responding to set address.
[26307.087474] usb 3-5: Device not responding to set address.
[26307.291739] usb 3-5: device not accepting address 52, error -71
[26342.667510] usb 3-5: new high-speed USB device number 91 using xhci_hcd
[26342.667543] usb 3-5: Device not responding to set address.
[26342.871811] usb 3-5: Device not responding to set address.
[26343.076074] usb 3-5: device not accepting address 91, error -71
[26436.008006] usb 3-5: new high-speed USB device number 21 using xhci_hcd
[26436.008056] usb 3-5: Device not responding to set address.
[26436.212299] usb 3-5: Device not responding to set address.
[26436.416599] usb 3-5: device not accepting address 21, error -71
[26450.160718] usb 3-5: new high-speed USB device number 85 using xhci_hcd
[26450.160768] usb 3-5: Device not responding to set address.
[26450.365076] usb 3-5: Device not responding to set address.
[26450.569285] usb 3-5: device not accepting address 85, error -71
[26542.852254] usb 3-5: new high-speed USB device number 12 using xhci_hcd
[26542.852279] usb 3-5: Device not responding to set address.
[26543.056564] usb 3-5: Device not responding to set address.
[26543.260812] usb 3-5: device not accepting address 12, error -71
[26881.976157] usb 3-5: new high-speed USB device number 78 using xhci_hcd
[26881.976229] usb 3-5: Device not responding to set address.
[26882.180500] usb 3-5: Device not responding to set address.
[26882.384757] usb 3-5: device not accepting address 78, error -71
[28011.099319] usb 3-5: new high-speed USB device number 44 using xhci_hcd
[28011.099356] usb 3-5: Device not responding to set address.
[28011.303610] usb 3-5: Device not responding to set address.
[28011.507919] usb 3-5: device not accepting address 44, error -71
[28049.920108] usb 3-5: new high-speed USB device number 97 using xhci_hcd
[28049.920171] usb 3-5: Device not responding to set address.
[28050.124400] usb 3-5: Device not responding to set address.
[28050.328696] usb 3-5: device not accepting address 97, error -71
[28060.175095] usb 3-5: new high-speed USB device number 18 using xhci_hcd
[28060.175137] usb 3-5: Device not responding to set address.
[28060.379443] usb 3-5: Device not responding to set address.
[28060.583704] usb 3-5: device not accepting address 18, error -71
[28177.318388] usb 3-5: new high-speed USB device number 58 using xhci_hcd
[28177.318421] usb 3-5: Device not responding to set address.
[28177.522702] usb 3-5: Device not responding to set address.
[28177.726961] usb 3-5: device not accepting address 58, error -71
[28392.436949] usb 3-5: new high-speed USB device number 51 using xhci_hcd
[28392.436975] usb 3-5: Device not responding to set address.
[28392.641286] usb 3-5: Device not responding to set address.
[28392.845578] usb 3-5: device not accepting address 51, error -71
[28884.897109] usb 3-5: new high-speed USB device number 76 using xhci_hcd
[28884.897145] usb 3-5: Device not responding to set address.
[28885.101463] usb 3-5: Device not responding to set address.
[28885.309736] usb 3-5: device not accepting address 76, error -71
[28892.344025] usb 3-5: new high-speed USB device number 109 using xhci_hcd
[28892.344073] usb 3-5: Device not responding to set address.
[28892.548384] usb 3-5: Device not responding to set address.
[28892.752604] usb 3-5: device not accepting address 109, error -71
[28906.276375] usb 3-5: new high-speed USB device number 47 using xhci_hcd
[28906.276408] usb 3-5: Device not responding to set address.
[28906.480688] usb 3-5: Device not responding to set address.
[28906.684978] usb 3-5: device not accepting address 47, error -71
[28979.699783] usb 3-5: new high-speed USB device number 10 using xhci_hcd
[28979.699836] usb 3-5: Device not responding to set address.
[28979.904128] usb 3-5: Device not responding to set address.
[28980.108380] usb 3-5: device not accepting address 10, error -71
[29015.704438] usb 3-5: new high-speed USB device number 50 using xhci_hcd
[29015.704480] usb 3-5: Device not responding to set address.
[29015.908765] usb 3-5: Device not responding to set address.
[29016.112994] usb 3-5: device not accepting address 50, error -71
[29040.244323] usb 3-5: new high-speed USB device number 37 using xhci_hcd
[29040.244430] usb 3-5: Device not responding to set address.
[29040.448551] usb 3-5: Device not responding to set address.
[29040.652871] usb 3-5: device not accepting address 37, error -71
[29052.472787] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[29052.484084] JFS: nTxBlock = 8192, nTxLock = 65536
[29052.501947] NTFS driver 2.1.30 [Flags: R/O MODULE].
[29052.524702] QNX4 filesystem 0.2.3 registered.
[29052.535493] xor: automatically using best checksumming function:
[29052.574259]    avx       : 35100.000 MB/sec
[29052.642370] raid6: mmxx1     3126 MB/s
[29052.710486] raid6: mmxx2     1549 MB/s
[29052.778587] raid6: sse1x1    1282 MB/s
[29052.846683] raid6: sse1x2    1857 MB/s
[29052.914779] raid6: sse2x1    2383 MB/s
[29052.982867] raid6: sse2x2    3168 MB/s
[29053.050969] raid6: avx2x1    7108 MB/s
[29053.119069] raid6: avx2x2    5683 MB/s
[29053.119074] raid6: using algorithm avx2x1 (7108 MB/s)
[29053.119077] raid6: using avx2x1 recovery algorithm
[29053.188149] bio: create slab <bio-1> at 1
[29053.188730] Btrfs loaded
[29063.045668] usb 3-5: new high-speed USB device number 16 using xhci_hcd
[29063.045723] usb 3-5: Device not responding to set address.
[29063.249962] usb 3-5: Device not responding to set address.
[29063.454262] usb 3-5: device not accepting address 16, error -71
[29073.949614] usb 3-5: new high-speed USB device number 65 using xhci_hcd
[29073.949665] usb 3-5: Device not responding to set address.
[29074.153919] usb 3-5: Device not responding to set address.
[29074.358206] usb 3-5: device not accepting address 65, error -71
[29145.434093] usb 3-5: new high-speed USB device number 19 using xhci_hcd
[29145.434148] usb 3-5: Device not responding to set address.
[29145.638438] usb 3-5: Device not responding to set address.
[29145.842682] usb 3-5: device not accepting address 19, error -71
[29691.304396] usb 3-2: new full-speed USB device number 41 using xhci_hcd
[29691.322438] usb 3-2: New USB device found, idVendor=03f0, idProduct=7e04
[29691.322447] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[29691.322453] usb 3-2: Product: Deskjet F4100 series
[29691.322458] usb 3-2: Manufacturer: HP
[29691.322462] usb 3-2: SerialNumber: CN86M7V09N04TJ
[29691.322750] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[29691.322782] usb 3-2: ep 0x84 - rounding interval to 64 microframes, ep desc says 80 microframes
[29691.322808] usb 3-2: ep 0x88 - rounding interval to 64 microframes, ep desc says 80 microframes
[29691.522539] WARNING! power/level is deprecated; use power/control instead
[29691.527937] usb 3-2: ep 0x84 - rounding interval to 64 microframes, ep desc says 80 microframes
[29694.567552] type=1400 audit(1479938233.733:65): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=19446 comm="cups-deviced" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
[29694.567557] type=1400 audit(1479938233.733:66): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=19446 comm="cups-deviced" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
[29694.567565] type=1400 audit(1479938233.733:67): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=19446 comm="cups-deviced" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
[29694.569593] type=1400 audit(1479938233.737:68): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=2680 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
[29694.569599] type=1400 audit(1479938233.737:69): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=2680 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
[29694.569603] type=1400 audit(1479938233.737:70): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=2680 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
[29694.591229] usb 3-2: ep 0x84 - rounding interval to 64 microframes, ep desc says 80 microframes
[29694.592053] usblp 3-2:1.1: usblp1: USB Bidirectional printer dev 41 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7E04
[29694.592074] usbcore: registered new interface driver usblp
[29872.473327] usb 3-5: new high-speed USB device number 8 using xhci_hcd
[29872.473400] usb 3-5: Device not responding to set address.
[29872.677676] usb 3-5: Device not responding to set address.
[29872.881856] usb 3-5: device not accepting address 8, error -71
[29924.261068] INFO: task upowerd:1393 blocked for more than 120 seconds.
[29924.261078]       Not tainted 3.13.0-101-generic #148-Ubuntu
[29924.261082] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[29924.261087] upowerd         D c12af60a     0  1393      1 0x00000000
[29924.261097]  efe97eb8 00000082 c1187ed5 c12af60a 000080d0 c1aa3300 c1aa3300 f3502700
[29924.261111]  efe97ef4 f3502700 f69e4e00 f7be5300 f6c681c8 efe97e78 c1304130 f6c68180
[29924.261123]  efe97e90 c1190bce 00000000 efe97ef4 efe97e90 c1198d4d efe97ee0 c118a740
[29924.261136] Call Trace:
[29924.261152]  [<c1187ed5>] ? link_path_walk+0x1e5/0x6d0
[29924.261161]  [<c12af60a>] ? apparmor_file_alloc_security+0x4a/0x130
[29924.261171]  [<c1304130>] ? lockref_put_or_lock+0x20/0x30
[29924.261181]  [<c1190bce>] ? dput+0x1e/0x160
[29924.261190]  [<c1198d4d>] ? mntput+0x1d/0x30
[29924.261196]  [<c118a740>] ? path_openat+0x120/0x520
[29924.261206]  [<c1662c73>] schedule_preempt_disabled+0x23/0x60
[29924.261213]  [<c16645bd>] __mutex_lock_slowpath+0x10d/0x171
[29924.261226]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[29924.261232]  [<c1663aec>] mutex_lock+0x1c/0x28
[29924.261240]  [<c14bb2e0>] read_descriptors+0x20/0x100
[29924.261248]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[29924.261257]  [<c11e009e>] sysfs_bin_read+0xde/0x250
[29924.261264]  [<c11dffc0>] ? sysfs_write_file+0x1c0/0x1c0
[29924.261271]  [<c117cee8>] vfs_read+0x78/0x140
[29924.261278]  [<c117d669>] SyS_read+0x49/0x90
[29924.261287]  [<c166d08d>] sysenter_do_call+0x12/0x12
[29924.261367] INFO: task hpfax:19450 blocked for more than 120 seconds.
[29924.261371]       Not tainted 3.13.0-101-generic #148-Ubuntu
[29924.261374] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[29924.261377] hpfax           D c12af60a     0 19450      1 0x00000000
[29924.261384]  d2ee1eb8 00200086 c1187ed5 c12af60a 000080d0 c1aa3300 c1aa3300 f3500d00
[29924.261397]  d2ee1ef4 f3500d00 f05d9a00 f7bc9300 f3a9b300 d2f99800 f3401a80 d2ee1edc
[29924.261408]  00200292 8010000d 00000000 80100010 c11e0041 000000d0 d2ee1ee0 c118a740
[29924.261421] Call Trace:
[29924.261428]  [<c1187ed5>] ? link_path_walk+0x1e5/0x6d0
[29924.261434]  [<c12af60a>] ? apparmor_file_alloc_security+0x4a/0x130
[29924.261442]  [<c11e0041>] ? sysfs_bin_read+0x81/0x250
[29924.261448]  [<c118a740>] ? path_openat+0x120/0x520
[29924.261455]  [<c1662c73>] schedule_preempt_disabled+0x23/0x60
[29924.261462]  [<c16645bd>] __mutex_lock_slowpath+0x10d/0x171
[29924.261470]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[29924.261476]  [<c1663aec>] mutex_lock+0x1c/0x28
[29924.261483]  [<c14bb2e0>] read_descriptors+0x20/0x100
[29924.261491]  [<c14bb2c0>] ? authorized_show+0x40/0x40
[29924.261497]  [<c11e009e>] sysfs_bin_read+0xde/0x250
[29924.261504]  [<c11dffc0>] ? sysfs_write_file+0x1c0/0x1c0
[29924.261510]  [<c117cee8>] vfs_read+0x78/0x140
[29924.261517]  [<c117d669>] SyS_read+0x49/0x90
[29924.261524]  [<c166d08d>] sysenter_do_call+0x12/0x12
[29924.261529] INFO: task usb:19451 blocked for more than 120 seconds.
[29924.261533]       Not tainted 3.13.0-101-generic #148-Ubuntu
[29924.261536] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[29924.261539] usb             D c12af60a     0 19451      1 0x00000004
[29924.261545]  dabd1eb8 00000082 c1187ed5 c12af60a 000080d0 c1aa3300 c1aa3300 f3500d00
[29924.261557]  dabd1ef4 f3500d00 f05ddb00 f7bc9300 f6c681c8 dabd1e78 c1304130 f6c68180
[29924.261569]  dabd1e90 c1190bce 00000000 dabd1ef4 dabd1e90 c1198d4d dabd1ee0 c118a740
[29924.261580] Call Trace:
[29924.261587]  [<c1187ed5>] ? link_path_walk+0x1e5/0x6d0
[29924.261593]  [<c12af60a>] ? apparmor_file_alloc_security+0x4a/0x130
[29924.261601]  [<c1304130>] ? lockref_put_or_lock+0x20/0x30
[29924.261609]  [<c1190bce>] ? dput+0x1e/0x160
[29924.261617]  [<c1198d4d>] ? mntput+0x1d/0x30
[29924.261623]  [<c118a740>] ? path_openat+0x120/0x520
utilisateur@PCI3:~$

Voilà pour les premières commandes,  merci de me dire ce que je dois faire, je suis perdu .

Merci d'avance

Hors ligne

#12 Le 24/11/2016, à 00:50

chafoin

Re : HELP ! problèmes multiples (démarrage/ extinction/ imprimantes/ maj)

=Je vois que tu as une liste impressionnante de noyaux. Au lieu de booter sur la première ligne, choisis la seconde ligne et enfin un ligne normale du milieu de la liste et indiques si la durée du boot est pareile. Idem pour l'arrêt. Au besoin prends la dernière de la liste.

Ok, mais concrètement, comment je fais pour booter sur les lignes que tu m'indiques ?
Merci de ta patience !

Hors ligne

#13 Le 24/11/2016, à 18:39

chafoin

Re : HELP ! problèmes multiples (démarrage/ extinction/ imprimantes/ maj)

Bonjour,
Alors pour le boot sur la 2eme ligne :
Au démarrage : impéccable ! en 5s j'ai mon bureau
A l'arrêt : c'est une autre affaire , il ne veut pas s'éteindre et bloque sur

will now halt

Ma carte graphique est une : Gallium 0.4 on llvmpipe (LLVM 3.4, 256 bits)

Sinon, je n'arrive pas à supprimer le doublon suivant :

: Duplicate sources.list entry http://download.mono-project.com/repo/debian/ wheezy-apache24-compat/main i386 Packages (/var/lib/apt/lists/download.mono-project.com_repo_debian_dists_wheezy-apache24-compat_main_binary-i386_Packages)
W: Duplicate sources.list entry http://download.mono-project.com/repo/debian/ wheezy-apache24-compat/main i386 Packages (/var/lib/apt/lists/download.mono-project.com_repo_debian_dists_wheezy-apache24-compat_main_binary-i386_Packages)
W: Duplicate sources.list entry http://download.mono-project.com/repo/debian/ wheezy-apache24-compat/main i386 Packages (/var/lib/apt/lists/download.mono-project.com_repo_debian_dists_wheezy-apache24-compat_main_binary-i386_Packages)

Que dois-je faire désormais ?


Merci par avance

Hors ligne

#14 Le 26/11/2016, à 15:37

Bougron

Re : HELP ! problèmes multiples (démarrage/ extinction/ imprimantes/ maj)

Bonjour.
Pour le moment, je n'ai pas de pistes sérieuses pour l'arrêt qui ne se fait pas.

Pour le redémarrage redevenu rapide, comme je t'ai proposé une modif au niveau du grub ou de choisir un noyau ancien, peux-tu dire si tu as fais la modif acpi=Off et quel noyau ancien tu as choisis, car il me semble que tu as choisis le plus récent!


A) Pour google, regardes cette discussion
https://forum.ubuntu-fr.org/viewtopic.p … #p21471357
et répares pour eliminer l'erreur.

B) Pour les doublons, peux-tu donner le retour de 

ls   -ls     /etc/apt/sources.list.d

C) Probablement liés à l'arrêt impossible, j'ai vu pas mal d'erreurs de ce style que je ne sais pas interpréter

 29924.261068] INFO: task upowerd:1393 blocked for more than 120 seconds.
[29924.261078]       Not tainted 3.13.0-101-generic #148-Ubuntu

D)Toujours ce message intrigant répété

 26343.076074] usb 3-5: device not accepting address 91, error -71

E) Ainsi que ce message que je pense lié à l'imprimante

[29691.304396] usb 3-2: new full-speed USB device number 41 using xhci_hcd
[29691.322438] usb 3-2: New USB device found, idVendor=03f0, idProduct=7e04
[29691.322447] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[29691.322453] usb 3-2: Product: Deskjet F4100 series
[29691.322458] usb 3-2: Manufacturer: HP
[29691.322462] usb 3-2: SerialNumber: CN86M7V09N04TJ
[29691.322750] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[29691.322782] usb 3-2: ep 0x84 - rounding interval to 64 microframes, ep desc says 80 microframes
[29691.322808] usb 3-2: ep 0x88 - rounding interval to 64 microframes, ep desc says 80 microframes
[29691.522539] WARNING! power/level is deprecated; use power/control instead
[29691.527937] usb 3-2: ep 0x84 - rounding interval to 64 microframes, ep desc says 80 microframes

Dernière modification par Bougron (Le 26/11/2016, à 18:15)

Hors ligne

#15 Le 26/11/2016, à 18:49

Bougron

Re : HELP ! problèmes multiples (démarrage/ extinction/ imprimantes/ maj)

Pourrais-tu installer l'application GSMARTCONTROL  qui est dans la logithèque et donner le retour de la commande 

 sudo  smartctl  -s  on   -a    /dev/sda

(L'attente des 120 secondes pointe souvent sur des disques).

Fais aussia la commande lsusb afin d'identifier le périphérique branché sur 3-5

Dernière modification par Bougron (Le 26/11/2016, à 20:04)

Hors ligne

#16 Le 30/11/2016, à 16:10

chafoin

Re : HELP ! problèmes multiples (démarrage/ extinction/ imprimantes/ maj)

Bonjour Bougron.

Désolé pour la réponse tardive mais je n'ai plus accès à mon PC, l'écran ne répond plus. Le voyant de l'écran clignote bleu / jaune en continu même quand la tour est à l'arrêt.

J'ai donc décidé d'emmener  la tour où je l'ai achetée. Ils vont prendre le relais et je vais leur relayer les informations que tu as partagées sur le forum.

Encore merci pour l'aide et le temps que tu m'a consacré.

Je te tiendrais informé du ou des problèmes une fois (je l'espère) réglé.

A bientôt.

Chafoin

Hors ligne

Pages : 1