Ubuntu-fr

reven04

Probléme d'arret d'ubuntu 16.04

Bonjour

Mon Ubuntu a beaucoup de mal a s’arrêter, je suis la plupart du temps obliger de forcer l'arret en restant appuyer sur le bouton Marche/Arret de mon pc.

Vous auriez une idée d’où cela peu venir?

Il s’agit d'une nouvelle installation, elle à 4 jours.

malbo

Re : Probléme d'arret d'ubuntu 16.04

Bonsoir,
Je te prie de donner le nom complet du modèle de ton ordi et son fabricant.

Bougron

Re : Probléme d'arret d'ubuntu 16.04

Bonsoir.
Donnes aussi le retour de

dmesg  | tail   -400

reven04

Re : Probléme d'arret d'ubuntu 16.04

Mon ordinateur est un msi ge60 20c

Bonsoir.
Donnes aussi le retour de

dmesg  | tail   -400

 dmesg  | tail   -400
[    0.857963] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.857965] software IO TLB [mem 0xa7487000-0xab487000] (64MB) mapped at [ffff99a6e7487000-ffff99a6eb486fff]
[    0.858112] Scanning for low memory corruption every 60 seconds
[    0.858343] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.858359] audit: initializing netlink subsys (disabled)
[    0.858371] audit: type=2000 audit(1480275228.856:1): initialized
[    0.858652] Initialise system trusted keyrings
[    0.858709] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.859802] zbud: loaded
[    0.860089] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.860229] fuse init (API version 7.25)
[    0.860315] Key type big_key registered
[    0.860318] Allocating IMA blacklist keyring.
[    0.861121] Key type asymmetric registered
[    0.861122] Asymmetric key parser 'x509' registered
[    0.861145] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.861168] io scheduler noop registered
[    0.861168] io scheduler deadline registered (default)
[    0.861173] io scheduler cfq registered
[    0.861661] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.861664] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.861691] intel_idle: MWAIT substates: 0x42120
[    0.861692] intel_idle: v0.4.1 model 0x3C
[    0.861797] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.862009] ACPI: AC Adapter [ADP1] (on-line)
[    0.862065] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/PNP0C09:00/PNP0C0D:00/input/input0
[    0.862228] ACPI: Lid Switch [LID0]
[    0.862263] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.862265] ACPI: Power Button [PWRB]
[    0.862290] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.862291] ACPI: Power Button [PWRF]
[    0.862777] thermal LNXTHERM:00: registered as thermal_zone0
[    0.862778] ACPI: Thermal Zone [TZ00] (28 C)
[    0.862923] thermal LNXTHERM:01: registered as thermal_zone1
[    0.862924] ACPI: Thermal Zone [TZ01] (30 C)
[    0.864216] thermal LNXTHERM:02: registered as thermal_zone2
[    0.864218] ACPI: Thermal Zone [THRM] (70 C)
[    0.864265] GHES: HEST is not enabled!
[    0.864355] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.865934] Linux agpgart interface v0.103
[    0.868055] brd: module loaded
[    0.868877] loop: module loaded
[    0.869003] libphy: Fixed MDIO Bus: probed
[    0.869004] tun: Universal TUN/TAP device driver, 1.6
[    0.869004] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.869029] PPP generic driver version 2.4.2
[    0.869065] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.869067] ehci-pci: EHCI PCI platform driver
[    0.869157] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.869161] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.869170] ehci-pci 0000:00:1a.0: debug port 2
[    0.873058] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.873067] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7b1c000
[    0.885290] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.885327] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.885328] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.885329] usb usb1: Product: EHCI Host Controller
[    0.885330] usb usb1: Manufacturer: Linux 4.8.0-27-generic ehci_hcd
[    0.885330] usb usb1: SerialNumber: 0000:00:1a.0
[    0.885506] hub 1-0:1.0: USB hub found
[    0.885510] hub 1-0:1.0: 2 ports detected
[    0.885694] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.885697] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.885707] ehci-pci 0000:00:1d.0: debug port 2
[    0.889597] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.889604] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7b1b000
[    0.905302] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.905342] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.905344] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.905345] usb usb2: Product: EHCI Host Controller
[    0.905346] usb usb2: Manufacturer: Linux 4.8.0-27-generic ehci_hcd
[    0.905346] usb usb2: SerialNumber: 0000:00:1d.0
[    0.905545] hub 2-0:1.0: USB hub found
[    0.905550] hub 2-0:1.0: 2 ports detected
[    0.905668] ehci-platform: EHCI generic platform driver
[    0.905682] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.905685] ohci-pci: OHCI PCI platform driver
[    0.905693] ohci-platform: OHCI generic platform driver
[    0.905698] uhci_hcd: USB Universal Host Controller Interface driver
[    0.905816] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.905819] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.906898] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.906902] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.906973] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.906974] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.906975] usb usb3: Product: xHCI Host Controller
[    0.906975] usb usb3: Manufacturer: Linux 4.8.0-27-generic xhci-hcd
[    0.906976] usb usb3: SerialNumber: 0000:00:14.0
[    0.907131] hub 3-0:1.0: USB hub found
[    0.907147] hub 3-0:1.0: 14 ports detected
[    0.908910] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.908912] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.908937] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.908938] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.908939] usb usb4: Product: xHCI Host Controller
[    0.908939] usb usb4: Manufacturer: Linux 4.8.0-27-generic xhci-hcd
[    0.908940] usb usb4: SerialNumber: 0000:00:14.0
[    0.909067] hub 4-0:1.0: USB hub found
[    0.909077] hub 4-0:1.0: 4 ports detected
[    0.909677] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.920114] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.920116] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.920348] mousedev: PS/2 mouse device common for all mice
[    0.920623] rtc_cmos 00:02: RTC can wake from S4
[    0.920743] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.920766] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.920770] i2c /dev entries driver
[    0.920809] device-mapper: uevent: version 1.0.3
[    0.920854] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    0.920859] intel_pstate: Intel P-state driver initializing
[    0.921046] ledtrig-cpu: registered to indicate activity on CPUs
[    0.921747] NET: Registered protocol family 10
[    0.922238] NET: Registered protocol family 17
[    0.922256] Key type dns_resolver registered
[    0.922680] microcode: sig=0x306c3, pf=0x10, revision=0x20
[    0.922853] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.923246] registered taskstats version 1
[    0.923251] Loading compiled-in X.509 certificates
[    0.930130] Loaded X.509 cert 'Build time autogenerated kernel key: 53215c7b458776554ca2158e042cc68ec4a8874b'
[    0.930173] zswap: loaded using pool lzo/zbud
[    0.932627] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.947221] Key type trusted registered
[    0.948414] Key type encrypted registered
[    0.948416] AppArmor: AppArmor sha1 policy hashing enabled
[    0.948418] ima: No TPM chip found, activating TPM-bypass!
[    0.948435] evm: HMAC attrs: 0x1
[    0.948968]   Magic number: 8:107:598
[    0.949077] rtc_cmos 00:02: setting system clock to 2016-11-27 19:33:49 UTC (1480275229)
[    0.949115] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.949115] EDD information not available.
[    0.949168] PM: Hibernation image not present or could not be loaded.
[    0.977326] ACPI: Battery Slot [BAT1] (battery present)
[    0.978339] Freeing unused kernel memory: 1548K (ffffffffae366000 - ffffffffae4e9000)
[    0.978340] Write protecting the kernel read-only data: 14336k
[    0.978646] Freeing unused kernel memory: 1376K (ffff99a7942a8000 - ffff99a794400000)
[    0.979126] Freeing unused kernel memory: 292K (ffff99a7947b7000 - ffff99a794800000)
[    0.984093] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.992327] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.992378] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.992384] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.992783] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.992807] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.993570] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.993600] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.993608] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.993828] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.993857] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.013039] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.015835] wmi: Mapper loaded
[    1.027956] [drm] Initialized drm 1.1.0 20060810
[    1.034409] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 26
[    1.036152] ahci 0000:00:1f.2: version 3.0
[    1.036420] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x31 impl SATA mode
[    1.036422] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.042097] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [8c:89:a5:0e:bd:cc]
[    1.062121] scsi host0: ahci
[    1.062645] scsi host1: ahci
[    1.062758] scsi host2: ahci
[    1.062842] scsi host3: ahci
[    1.062921] scsi host4: ahci
[    1.063001] scsi host5: ahci
[    1.063054] ata1: SATA max UDMA/133 abar m2048@0xf7b1a000 port 0xf7b1a100 irq 27
[    1.063055] ata2: DUMMY
[    1.063056] ata3: DUMMY
[    1.063056] ata4: DUMMY
[    1.063059] ata5: SATA max UDMA/133 abar m2048@0xf7b1a000 port 0xf7b1a300 irq 27
[    1.063061] ata6: SATA max UDMA/133 abar m2048@0xf7b1a000 port 0xf7b1a380 irq 27
[    1.063278] [drm] Memory usable by graphics device = 2048M
[    1.063280] [drm] Replacing VGA console driver
[    1.063836] Console: switching to colour dummy device 80x25
[    1.065622] MXM: GUID detected in BIOS
[    1.065693] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[    1.065756] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[    1.066005] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[    1.066008] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[    1.066178] nouveau 0000:01:00.0: NVIDIA GK107 (0e7240a2)
[    1.069294] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.069295] [drm] Driver supports precise vblank timestamp query.
[    1.071924] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.082132] alx 0000:03:00.0 enp3s0: renamed from eth0
[    1.146835] nouveau 0000:01:00.0: bios: version 80.07.a2.00.07
[    1.213254] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.233245] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[    1.233251] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.310305] nouveau 0000:01:00.0: fb: 2048 MiB GDDR5
[    1.310399] nouveau 0000:01:00.0: bus: MMIO write of 00000002 FAULT at 4188ac [ IBUS ]
[    1.361589] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    1.361590] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.361735] hub 1-1:1.0: USB hub found
[    1.361838] hub 1-1:1.0: 6 ports detected
[    1.375857] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.378438] usb 3-1: New USB device found, idVendor=1532, idProduct=0101
[    1.378439] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.378439] usb 3-1: Product: Razer Copperhead Laser Mouse
[    1.378440] usb 3-1: Manufacturer: Razer
[    1.379926] ata1.00: ATAPI: MATSHITA DVD-RAM UJ8E1, 1.00, max UDMA/100
[    1.379941] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.379958] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.380618] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.380620] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.380622] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.380804] vga_switcheroo: enabled
[    1.381052] [TTM] Zone  kernel: Available graphics memory: 4046868 kiB
[    1.381053] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    1.381054] [TTM] Initializing pool allocator
[    1.381061] [TTM] Initializing DMA pool allocator
[    1.381074] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[    1.381076] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    1.381086] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
[    1.381089] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    1.381090] nouveau 0000:01:00.0: DRM: Pointer to flat panel table invalid
[    1.381115] ata5.00: ATA-9: WDC WD5000LPVX-22V0TT0, 01.01A01, max UDMA/133
[    1.381116] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.381183] hidraw: raw HID events driver (C) Jiri Kosina
[    1.381803] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.381805] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.381807] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.382360] ata1.00: configured for UDMA/100
[    1.382366] ata5.00: configured for UDMA/133
[    1.382697] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.382698] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.382853] hub 2-1:1.0: USB hub found
[    1.382948] hub 2-1:1.0: 8 ports detected
[    1.386837] scsi 0:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8E1    1.00 PQ: 0 ANSI: 5
[    1.387480] usbcore: registered new interface driver usbhid
[    1.387481] usbhid: USB HID core driver
[    1.388746] input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:1532:0101.0001/input/input6
[    1.388835] hid-generic 0003:1532:0101.0001: input,hidraw0: USB HID v10.01 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:14.0-1/input0
[    1.388949] input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:1532:0101.0002/input/input7
[    1.391223] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.391225] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.391226] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.401616] ata6.00: ATA-8: KINGSTON SMS200S360G, 507ABBF0, max UDMA/133
[    1.401617] ata6.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.411209] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.411212] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.411213] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.413844] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.413845] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.413985] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.414059] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.414190] scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000LPVX-2 1A01 PQ: 0 ANSI: 5
[    1.421245] ata6.00: configured for UDMA/133
[    1.445368] hid-generic 0003:1532:0101.0002: input,hidraw1: USB HID v10.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:14.0-1/input1
[    1.485687] random: fast init done
[    1.497237] usb 3-7: new full-speed USB device number 3 using xhci_hcd
[    1.578268] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[    1.578273] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[    1.580127] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    1.581610] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    1.581613] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.581616] ACPI Error: Method parse/execution failed [\_SB.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff99a8870eea78), AE_NOT_FOUND (20160422/psparse-542)
[    1.581742] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:47/LNXVIDEO:00/input/input8
[    1.583480] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.583589] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9
[    1.583683] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
[    1.613406] sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.613409] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    1.613417] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    1.613451] sd 4:0:0:0: [sda] Write Protect is off
[    1.613454] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.613472] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.613560] scsi 5:0:0:0: Direct-Access     ATA      KINGSTON SMS200S BBF0 PQ: 0 ANSI: 5
[    1.638283] usb 3-7: New USB device found, idVendor=13d3, idProduct=3394
[    1.638284] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.638285] usb 3-7: Product: RT Bluetooth Radio
[    1.638286] usb 3-7: Manufacturer: Realtek
[    1.638287] usb 3-7: SerialNumber: 00e04c000001
[    1.653415] sd 5:0:0:0: [sdb] 117231408 512-byte logical blocks: (60.0 GB/55.9 GiB)
[    1.653419] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    1.653478] sd 5:0:0:0: [sdb] Write Protect is off
[    1.653480] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.653516] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.655275]  sdb: sdb1 sdb2 < sdb5 >
[    1.655565] sd 5:0:0:0: [sdb] Attached SCSI disk
[    1.679526]  sda: sda1
[    1.679769] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.749722] fbcon: inteldrmfb (fb0) is primary device
[    1.757236] usb 3-8: new high-speed USB device number 4 using xhci_hcd
[    1.780936] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f00)
[    1.798869] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0e.
[    1.815950] psmouse serio1: elantech: Elan sample query result 01, 6b, 75
[    1.885233] tsc: Refined TSC clocksource calibration: 2494.224 MHz
[    1.885239] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3e9a353a, max_idle_ns: 440795330815 ns
[    1.901761] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[    1.976448] usb 3-8: New USB device found, idVendor=064e, idProduct=9802
[    1.976450] usb 3-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.976451] usb 3-8: Product: USB 2.0 Webcam Device
[    1.976452] usb 3-8: Manufacturer: SuYin
[    1.976452] usb 3-8: SerialNumber: HF1316-T821-HM01-REV0109
[    2.811642] Console: switching to colour frame buffer device 170x48
[    2.830205] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.909205] clocksource: Switched to clocksource tsc
[    3.473112] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    3.547449] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.570069] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    3.570176] systemd[1]: Detected architecture x86-64.
[    3.570391] systemd[1]: Set hostname to <anthony-GE60-2OC-2OD-2OE>.
[    3.625621] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.625676] systemd[1]: Listening on Syslog Socket.
[    3.625684] systemd[1]: Reached target Remote File Systems.
[    3.625788] systemd[1]: Created slice System Slice.
[    3.625820] systemd[1]: Listening on udev Control Socket.
[    3.625835] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.625915] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.660653] lp: driver loaded but no devices found
[    3.663753] ppdev: user-space parallel port driver
[    3.801924] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[    3.809181] systemd-journald[282]: Received request to flush runtime journal from PID 1
[    4.122024] EDAC MC: Ver: 3.0.0
[    4.124618] EDAC ie31200: No ECC support
[    4.124846] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.173549] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.190567] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=2 (0x1b/0x16/0x0/0x0/0x0) type:speaker
[    4.190570] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.190571] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[    4.190572] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    4.190573] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[    4.190574] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    4.190576] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x19
[    4.190577] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x18
[    4.199364] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[    4.199490] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[    4.199720] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[    4.199760] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[    4.199797] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    4.237258] Bluetooth: Core ver 2.21
[    4.237270] NET: Registered protocol family 31
[    4.237270] Bluetooth: HCI device and connection manager initialized
[    4.237273] Bluetooth: HCI socket layer initialized
[    4.237275] Bluetooth: L2CAP socket layer initialized
[    4.237280] Bluetooth: SCO socket layer initialized
[    4.251796] usbcore: registered new interface driver btusb
[    4.252987] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=1200
[    4.252989] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723a_fw.bin
[    4.263281] media: Linux media interface: v0.10
[    4.273473] Linux video capture interface: v2.00
[    4.282088] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    4.282089] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    4.282090] RAPL PMU: hw unit of domain package 2^-14 Joules
[    4.282090] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    4.282090] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    4.294284] uvcvideo: Found UVC 1.00 device USB 2.0 Webcam Device (064e:9802)
[    4.304210] uvcvideo 3-8:1.0: Entity type for entity Extension 5 was not initialized!
[    4.304213] uvcvideo 3-8:1.0: Entity type for entity Extension 2 was not initialized!
[    4.304214] uvcvideo 3-8:1.0: Entity type for entity Processing 3 was not initialized!
[    4.304216] uvcvideo 3-8:1.0: Entity type for entity Camera 1 was not initialized!
[    4.304308] input: USB 2.0 Webcam Device as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input15
[    4.304370] usbcore: registered new interface driver uvcvideo
[    4.304371] USB Video Class driver (1.1.1)
[    4.304424] rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin
[    4.311285] AVX2 version of gcm_enc/dec engaged.
[    4.311286] AES CTR mode by8 optimization enabled
[    4.316713] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    4.316886] rtlwifi: rtlwifi: wireless switch is on
[    4.330954] Adding 8304636k swap on /dev/sdb5.  Priority:-1 extents:1 across:8304636k SSFS
[    4.371956] input: MSI WMI hotkeys as /devices/virtual/input/input16
[    4.388274] intel_rapl: Found RAPL domain package
[    4.388276] intel_rapl: Found RAPL domain core
[    4.388277] intel_rapl: Found RAPL domain uncore
[    4.388278] intel_rapl: Found RAPL domain dram
[    4.424816] rtl8723ae 0000:05:00.0 wlp5s0: renamed from wlan0
[    4.436263] random: crng init done
[    4.665719] audit: type=1400 audit(1480275233.212:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unity8-dash" pid=718 comm="apparmor_parser"
[    4.668780] audit: type=1400 audit(1480275233.212:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=715 comm="apparmor_parser"
[    4.668786] audit: type=1400 audit(1480275233.212:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=715 comm="apparmor_parser"
[    4.668790] audit: type=1400 audit(1480275233.212:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=715 comm="apparmor_parser"
[    4.668793] audit: type=1400 audit(1480275233.212:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=715 comm="apparmor_parser"
[    4.669429] audit: type=1400 audit(1480275233.216:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=714 comm="apparmor_parser"
[    4.669434] audit: type=1400 audit(1480275233.216:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=714 comm="apparmor_parser"
[    4.671651] audit: type=1400 audit(1480275233.216:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ioquake3/ioq3ded" pid=720 comm="apparmor_parser"
[    4.673226] audit: type=1400 audit(1480275233.220:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ioquake3/ioquake3" pid=721 comm="apparmor_parser"
[    4.778199] cgroup: new mount options do not match the existing superblock, will be ignored
[    4.779414] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.779416] Bluetooth: BNEP filters: protocol multicast
[    4.779419] Bluetooth: BNEP socket layer initialized
[    5.119631] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    5.120089] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    5.121066] alx 0000:03:00.0 enp3s0: NIC Up: 1 Gbps Full
[    5.121712] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[    5.127378] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[    5.514194] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[    5.602066] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[    7.813533] Bluetooth: RFCOMM TTY layer initialized
[    7.813539] Bluetooth: RFCOMM socket layer initialized
[    7.813543] Bluetooth: RFCOMM ver 1.11
[   10.965959] wlp5s0: authenticate with 00:24:d4:d2:6a:a0
[   11.347241] wlp5s0: send auth to 00:24:d4:d2:6a:a0 (try 1/3)
[   11.348965] wlp5s0: authenticated
[   11.352569] wlp5s0: associate with 00:24:d4:d2:6a:a0 (try 1/3)
[   11.355864] wlp5s0: RX AssocResp from 00:24:d4:d2:6a:a0 (capab=0x411 status=0 aid=2)
[   11.356277] wlp5s0: associated
[   11.356311] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[   16.860132] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[   16.860395] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[   16.860397] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[   16.860568] nouveau 0000:01:00.0: DRM: evicting buffers...
[   16.867487] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[   16.867509] nouveau 0000:01:00.0: DRM: suspending client object trees...
[   16.873111] nouveau 0000:01:00.0: DRM: suspending kernel object tree...

Modération : merci à l'avenir d'utiliser les balises code (explications ici).

Dernière modification par cqfd93 (Le 27/11/2016, à 22:03)

Bougron

Re : Probléme d'arret d'ubuntu 16.04

Bonsoir.
Sait-on jamais! https://forum.ubuntu-fr.org/viewtopic.p … #p21635762

reven04

Re : Probléme d'arret d'ubuntu 16.04

Bonsoir.
Sait-on jamais! https://forum.ubuntu-fr.org/viewtopic.p … #p21635762

Merci mais je n'ai aucun problème matériel, du moins pas que je sache.

Edit : Ah si je n'arrive pas a lancer openarena, c'est peu être lié

Dernière modification par reven04 (Le 29/11/2016, à 18:08)

reven04

Re : Probléme d'arret d'ubuntu 16.04

Personne n'a de solution ?

Ça m’embête un peu d’être contraint de retourner sur Windows pour un si petit problème

Bougron

Re : Probléme d'arret d'ubuntu 16.04

Bonjour
On va essayer de regarder quelques traces des arrêts. Comme je ne sais pas quoi chercher, je pars un peu en aveugle. Donnes le retour de

cat /var/log/syslog  | grep Stopping
cat /var/log/syslog  | grep Stopped
cat /var/log/syslog  | grep rsyslogd

et de

cat /var/log/syslog.1  | grep Stopping
cat /var/log/syslog.1  | grep Stopped
cat /var/log/syslog.1  | grep rsyslogd

Pour info, voila a quoi cela pourrait ressembler

cat /var/log/syslog  | grep Stopping
Nov 30 16:59:44 u16041 systemd[1]: Stopping RealtimeKit Scheduling Policy Service...
Nov 30 16:59:44 u16041 systemd[1]: Stopping Daemon for power management...
Nov 30 16:59:44 u16041 systemd[1]: Stopping Save/Restore Sound Card State...
Nov 30 16:59:44 u16041 systemd[1]: Stopping ACPI event daemon...
Nov 30 16:59:44 u16041 systemd[1]: Stopping Session c1 of user u16041.
Nov 30 16:59:44 u16041 systemd[1]: Stopping Manage, Install and Generate Color Profiles...
Nov 30 16:59:44 u16041 systemd[1]: Stopping Disk Manager...
Nov 30 16:59:44 u16041 systemd[1]: Stopping User Manager for UID 1000...
Nov 30 16:59:44 u16041 systemd[1]: Stopping Authenticate and Authorize Users to Run Privileged Tasks...
Nov 30 16:59:44 u16041 systemd[1]: Stopping Bluetooth service...
Nov 30 16:59:44 u16041 systemd[1]: Stopping Light Display Manager...
Nov 30 16:59:44 u16041 systemd[1]: Stopping Accounts Service..
u16041@u16041:/var/log$ cat /var/log/syslog  | grep Stopped
Nov 30 16:59:44 u16041 systemd[1]: Stopped target Bluetooth.
Nov 30 16:59:44 u16041 systemd[1]: Stopped target Timers.
Nov 30 16:59:44 u16041 systemd[1]: Stopped Daily Cleanup of Temporary Directories.
Nov 30 16:59:44 u16041 systemd[1]: Stopped target Sound Card.
Nov 30 16:59:44 u16041 systemd[1]: Stopped Stop ureadahead data collection 45s after completed startup.
Nov 30 16:59:44 u16041 systemd[1]: Stopped Daily apt activities.
Nov 30 16:59:44 u16041 systemd[1]: Stopped target Graphical Interface.
Nov 30 16:59:44 u16041 systemd[1]: Stopped target Multi-User System.
Nov 30 16:59:44 u16041 systemd[1]: Stopped Timer to automatically refresh installed snaps.
Nov 30 16:59:44 u16041 systemd[1]: Stopped target System Time Synchronized.
Nov 30 17:01:23 u16041 systemd[1]: Stopped Read required files in advance.
u16041@u16041:~$ cat /var/log/syslog  | grep rsyslogd
Nov 30 16:59:44 u16041 rsyslogd: [origin software="rsyslogd" swVersion="8.16.0" x-pid="871" x-info="http://www.rsyslog.com"] exiting on signal 15.
Nov 30 17:00:34 u16041 rsyslogd: [origin software="rsyslogd" swVersion="8.16.0" x-pid="805" x-info="http://www.rsyslog.com"] start
Nov 30 17:00:33 u16041 rsyslogd-2222: command 'KLogPermitNonKernelFacility' is currently not permitted - did you already set it via a RainerScript command (v6+ config)? [v8.16.0 try http://www.rsyslog.com/e/2222 ]
Nov 30 17:00:34 u16041 rsyslogd: rsyslogd's groupid changed to 108
Nov 30 17:00:34 u16041 rsyslogd: rsyslogd's userid changed to 104
Nov 30 17:00:34 u16041 rsyslogd-2039: Could not open output pipe '/dev/xconsole':: No such file or directory [v8.16.0 try http://www.rsyslog.com/e/2039 ]
Nov 30 17:00:34 u16041 apparmor[622]: Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd
Nov 30 17:00:34 u16041 rsyslogd-2007: action 'action 10' suspended, next retry is Wed Nov 30 17:01:04 2016 [v8.16.0 try http://www.rsyslog.com/e/2007 ]
u16041@u16041:~$

Dernière modification par Bougron (Le 30/11/2016, à 19:33)