Lenteur Ubuntu démarrage

titi118 · Le 23/11/2016, à 10:29

Bonjour!
Je viens d'installer Ubuntu sur mon ordi portable Lenovo X230 4GO ram + i5 + SSD 180GO en dual boot avec Windows 7 et tout va bien sauf que Ubuntu mets trop longtemps à se lancer à mon gout... Et cet ordinateur me servant à travailler, j'ai besoin de pouvoir y accéder vite n'importe quand.
J'avais déjà installer Ubuntu il y a une semaine mais suite à une fausse manip et un plantage j'ai préféré supprimer cette partition et la refaire. Avant Ubuntu se lançait en un clin d'oeil. Mais maintenant il me faut 3 bonnes minutes (Windows se lance carrément plus rapidement). Et il arrive de devoir attendre 5min pour que je puisse avoir accès à mes dossiers qui sont en "chargement"

Qu'en pensez vous? Je ne vois pas du tout à quoi cela pourrait être dû...

Dans un premier temps je vous laisse le boot-info fait hier: http://paste2.org/dWgXzPIk

Est-ce quelqu'un aurait une idée? Merci bien!

Dernière modification par titi118 (Le 23/11/2016, à 10:30)

Bougron · Le 23/11/2016, à 15:09

Bonjour
Dans un premier temps, tu vas ouvrir le fichier /etc/fstab pour rectifier la dernière ligne en la commentant

sudo   gedit  / etc/fstab

# swap was on /dev/sda3 during installation
#################### UUID=9ab9f1d1-5a7a-476c-bf59-d2107f888e75 none            swap    sw              0       0

Tu sauvegardes, puis tu bootes. Si c'est toujours aussi long, tu communiques la trace du boot

dmesg     >TRACE.txt
gedit         TRACE.txt

Tu fais un copier/coller de ce qui s'est affiché à l'écran dans cette discussion et tu en fais une mise en forme avec le 11eme icône <>

Dernière modification par Bougron (Le 23/11/2016, à 15:15)

titi118 · Le 23/11/2016, à 15:15

Merci beaucoup pour ta réponse!

Et, que je sois sûr de la manip, tu me demande de commenter la ligne UUID=blabla avec des "dièses" c'est ça? Pour qu'elle ne soit pas prise en compte au prochain démarrage?
Que fait cette ligne exactement?<>

Dernière modification par titi118 (Le 23/11/2016, à 15:27)

Bougron · Le 23/11/2016, à 15:44

Cette ligne part à la recherche d'une partition swap qui n'existe plus. La recherche met un certain temps (de l'ordre de 90 secondes) pour dire que la partition n'existe pas.
De plus, ubuntu sait reconnaître les partitions swaps présentes sans qu'on lui dise qu'elles sont à tel endroit ou tel autre.

titi118 · Le 23/11/2016, à 21:18

:o:o:o:o:o:o:o:o:o:o:o
Et bah, voilà qui est BEAUCOUP plus rapide!!! J'ai a peine eu le temps de le voir démarrer!
Super merci beaucoup!
Je te mets quand même la trace, si tu peux me garantir que tout est bon s'il te plait (parce que avec cette installation dual boot, ces soucis de démarrages, il n'est pas impossible que d'avoir fait des choses qui ne servent à rien).

Merci encore!! :D:D

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-47-generic (buildd@lcy01-03) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #68-Ubuntu SMP Wed Oct 26 19:39:52 UTC 2016 (Ubuntu 4.4.0-47.68-generic 4.4.24)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-47-generic root=UUID=3fcc2caf-cee6-4ed7-9a2b-94f59a5fef5b ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000cec30fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cec31000-0x00000000dae9efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011e5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 2325UQT/2325UQT, BIOS G2ETA7WW (2.67 ) 09/09/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x11e600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0C0000000 mask FE0000000 write-back
[    0.000000]   4 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   5 base 0DB000000 mask FFF000000 uncachable
[    0.000000]   6 base 100000000 mask FE0000000 write-back
[    0.000000]   7 base 11F000000 mask FFF000000 uncachable
[    0.000000]   8 base 11E800000 mask FFF800000 uncachable
[    0.000000]   9 base 11E600000 mask FFFE00000 uncachable
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xcec31 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[    0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[    0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[    0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[    0.000000] BRK [0x02206000, 0x02206fff] PGTABLE
[    0.000000] BRK [0x02207000, 0x02207fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x337f2000-0x35bf0fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000DAFFE170 0000BC (v01 LENOVO TP-G2    00002670 PTL  00000002)
[    0.000000] ACPI: FACP 0x00000000DAFE5000 00010C (v05 LENOVO TP-G2    00002670 PTL  00000002)
[    0.000000] ACPI: DSDT 0x00000000DAFE7000 011383 (v01 LENOVO TP-G2    00002670 INTL 20061109)
[    0.000000] ACPI: FACS 0x00000000DAF5A000 000040
[    0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO TP-G2    00002670 PTL  00000001)
[    0.000000] ACPI: TCPA 0x00000000DAFFC000 000032 (v02 PTL    LENOVO   06040000 LNVO 00000001)
[    0.000000] ACPI: SSDT 0x00000000DAFFB000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DAFFA000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DAFF9000 0007A8 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[    0.000000] ACPI: HPET 0x00000000DAFE3000 000038 (v01 LENOVO TP-G2    00002670 PTL  00000002)
[    0.000000] ACPI: APIC 0x00000000DAFE2000 000098 (v01 LENOVO TP-G2    00002670 PTL  00000002)
[    0.000000] ACPI: MCFG 0x00000000DAFE1000 00003C (v01 LENOVO TP-G2    00002670 PTL  00000002)
[    0.000000] ACPI: ECDT 0x00000000DAFE0000 000052 (v01 LENOVO TP-G2    00002670 PTL  00000002)
[    0.000000] ACPI: FPDT 0x00000000DAFDF000 000064 (v01 LENOVO TP-G2    00002670 PTL  00000002)
[    0.000000] ACPI: ASF! 0x00000000DAFE6000 0000A5 (v32 LENOVO TP-G2    00002670 PTL  00000002)
[    0.000000] ACPI: UEFI 0x00000000DAFDE000 00003E (v01 LENOVO TP-G2    00002670 PTL  00000002)
[    0.000000] ACPI: UEFI 0x00000000DAFDD000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: MSDM 0x00000000DAFDC000 000055 (v03 LENOVO TP-G2    00002670 PTL  00000002)
[    0.000000] ACPI: SSDT 0x00000000DAFDB000 000C79 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DAFDA000 000A83 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000DAFD9000 0002A6 (v01 LENOVO TP-G2    00002670 PTL  00000002)
[    0.000000] ACPI: DBG2 0x00000000DAFD8000 0000E9 (v00 LENOVO TP-G2    00002670 PTL  00000002)
[    0.000000] ACPI: DMI detected: Lenovo ThinkPad X230
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011e5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x11e5f8000-0x11e5fcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000011e5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.000000]   node   0: [mem 0x0000000040005000-0x00000000cec30fff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011e5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011e5fffff]
[    0.000000] On node 0 totalpages: 970700
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13161 pages used for memmap
[    0.000000]   DMA32 zone: 842288 pages, LIFO batch:31
[    0.000000]   Normal zone: 1944 pages used for memmap
[    0.000000]   Normal zone: 124416 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcec31000-0xdae9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdafff000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88011e200000 s98008 r8192 d28968 u262144
[    0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 955510
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-47-generic root=UUID=3fcc2caf-cee6-4ed7-9a2b-94f59a5fef5b ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3698560K/3882800K available (8423K kernel code, 1285K rwdata, 3952K rodata, 1480K init, 1292K bss, 184240K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:16640 nr_irqs:488 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2593.990 MHz processor
[    0.000033] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.98 BogoMIPS (lpj=10375960)
[    0.000035] pid_max: default: 32768 minimum: 301
[    0.000040] ACPI: Core revision 20150930
[    0.011179] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.011199] Security Framework initialized
[    0.011200] Yama: becoming mindful.
[    0.011214] AppArmor: AppArmor initialized
[    0.011453] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.012405] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.012831] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.012836] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.013048] Initializing cgroup subsys io
[    0.013051] Initializing cgroup subsys memory
[    0.013057] Initializing cgroup subsys devices
[    0.013059] Initializing cgroup subsys freezer
[    0.013061] Initializing cgroup subsys net_cls
[    0.013062] Initializing cgroup subsys perf_event
[    0.013065] Initializing cgroup subsys net_prio
[    0.013068] Initializing cgroup subsys hugetlb
[    0.013069] Initializing cgroup subsys pids
[    0.013089] CPU: Physical Processor ID: 0
[    0.013090] CPU: Processor Core ID: 0
[    0.013095] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.013096] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.013437] mce: CPU supports 7 MCE banks
[    0.013448] CPU0: Thermal monitoring enabled (TM1)
[    0.013453] process: using mwait in idle threads
[    0.013456] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.013457] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.013866] Freeing SMP alternatives memory: 32K (ffffffff820b5000 - ffffffff820bd000)
[    0.016715] ftrace: allocating 32047 entries in 126 pages
[    0.030975] smpboot: Max logical packages: 4
[    0.030978] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.031054] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.031506] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.071196] TSC deadline timer enabled
[    0.071199] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.071217] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.071235] ... version:                3
[    0.071236] ... bit width:              48
[    0.071237] ... generic registers:      4
[    0.071238] ... value mask:             0000ffffffffffff
[    0.071239] ... max period:             0000ffffffffffff
[    0.071239] ... fixed-purpose events:   3
[    0.071240] ... event mask:             000000070000000f
[    0.071984] x86: Booting SMP configuration:
[    0.071986] .... node  #0, CPUs:      #1
[    0.074750] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.074825]  #2 #3
[    0.080293] x86: Booted up 1 node, 4 CPUs
[    0.080296] smpboot: Total of 4 processors activated (20751.92 BogoMIPS)
[    0.083272] devtmpfs: initialized
[    0.086060] evm: security.selinux
[    0.086062] evm: security.SMACK64
[    0.086063] evm: security.SMACK64EXEC
[    0.086063] evm: security.SMACK64TRANSMUTE
[    0.086064] evm: security.SMACK64MMAP
[    0.086065] evm: security.ima
[    0.086066] evm: security.capability
[    0.086124] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
[    0.086205] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.086282] pinctrl core: initialized pinctrl subsystem
[    0.086385] RTC time: 19:13:26, date: 11/23/16
[    0.086486] NET: Registered protocol family 16
[    0.096291] cpuidle: using governor ladder
[    0.112297] cpuidle: using governor menu
[    0.112302] PCCT header not found.
[    0.112396] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.112397] ACPI: bus type PCI registered
[    0.112399] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.112591] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.112593] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.112598] PCI: Using configuration type 1 for base access
[    0.112631] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.128646] ACPI: Added _OSI(Module Device)
[    0.128648] ACPI: Added _OSI(Processor Device)
[    0.128649] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.128650] ACPI: Added _OSI(Processor Aggregator Device)
[    0.128651] ACPI: Deleted _OSI(Windows 2012)
[    0.129898] ACPI : EC: EC description table is found, configuring boot EC
[    0.129910] ACPI : EC: EC started
[    0.133500] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.135756] ACPI: Dynamic OEM Table Load:
[    0.135766] ACPI: SSDT 0xFFFF8800CA8A0000 000A01 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.136249] ACPI: Dynamic OEM Table Load:
[    0.136255] ACPI: SSDT 0xFFFF8800CA82B800 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.136681] ACPI: Dynamic OEM Table Load:
[    0.136686] ACPI: SSDT 0xFFFF880119337A00 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.137495] ACPI: Interpreter enabled
[    0.137510] ACPI: (supports S0 S3 S4 S5)
[    0.137511] ACPI: Using IOAPIC for interrupt routing
[    0.137529] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.140040] ACPI: Power Resource [PUBS] (on)
[    0.140603] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[    0.141482] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[    0.143569] acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
[    0.143968] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.144044] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
[    0.144120] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[    0.144192] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
[    0.144265] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.144342] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11)
[    0.144415] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
[    0.144488] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
[    0.144565] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.144570] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.144661] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.144700] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.144703] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.144704] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.144706] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.144843] PCI host bridge to bus 0000:00
[    0.144845] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.144847] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.144849] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.144850] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
[    0.144852] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
[    0.144853] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.144860] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.144936] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.144948] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.144953] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.144957] pci 0000:00:02.0: reg 0x20: [io  0x6000-0x603f]
[    0.145038] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.145068] pci 0000:00:14.0: reg 0x10: [mem 0xf2520000-0xf252ffff 64bit]
[    0.145127] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.145153] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.145192] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.145224] pci 0000:00:16.0: reg 0x10: [mem 0xf2535000-0xf253500f 64bit]
[    0.145287] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.145345] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
[    0.145372] pci 0000:00:16.3: reg 0x10: [io  0x60b0-0x60b7]
[    0.145381] pci 0000:00:16.3: reg 0x14: [mem 0xf253c000-0xf253cfff]
[    0.145492] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.145517] pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff]
[    0.145526] pci 0000:00:19.0: reg 0x14: [mem 0xf253b000-0xf253bfff]
[    0.145534] pci 0000:00:19.0: reg 0x18: [io  0x6080-0x609f]
[    0.145582] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.145607] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.145645] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.145673] pci 0000:00:1a.0: reg 0x10: [mem 0xf253a000-0xf253a3ff]
[    0.145745] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.145773] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.145810] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.145836] pci 0000:00:1b.0: reg 0x10: [mem 0xf2530000-0xf2533fff 64bit]
[    0.145898] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.145932] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.145974] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.146095] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.146171] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.146295] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.146371] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.146495] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.146534] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.146575] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.146602] pci 0000:00:1d.0: reg 0x10: [mem 0xf2539000-0xf25393ff]
[    0.146674] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.146701] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.146735] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[    0.146884] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.146907] pci 0000:00:1f.2: reg 0x10: [io  0x60a8-0x60af]
[    0.146915] pci 0000:00:1f.2: reg 0x14: [io  0x60bc-0x60bf]
[    0.146923] pci 0000:00:1f.2: reg 0x18: [io  0x60a0-0x60a7]
[    0.146930] pci 0000:00:1f.2: reg 0x1c: [io  0x60b8-0x60bb]
[    0.146938] pci 0000:00:1f.2: reg 0x20: [io  0x6060-0x607f]
[    0.146946] pci 0000:00:1f.2: reg 0x24: [mem 0xf2538000-0xf25387ff]
[    0.146977] pci 0000:00:1f.2: PME# supported from D3hot
[    0.147032] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.147049] pci 0000:00:1f.3: reg 0x10: [mem 0xf2534000-0xf25340ff 64bit]
[    0.147069] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.147382] pci 0000:02:00.0: [1180:e822] type 00 class 0x088001
[    0.147429] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[    0.147455] pci 0000:02:00.0: reg 0x10: [mem 0xf1d00000-0xf1d000ff]
[    0.147644] pci 0000:02:00.0: supports D1 D2
[    0.147646] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.152472] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.152477] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.152482] pci 0000:00:1c.0:   bridge window [mem 0xf1d00000-0xf24fffff]
[    0.152490] pci 0000:00:1c.0:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.152682] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
[    0.152969] pci 0000:03:00.0: reg 0x10: [mem 0xf1c00000-0xf1c01fff 64bit]
[    0.153607] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.160451] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.160459] pci 0000:00:1c.1:   bridge window [mem 0xf1c00000-0xf1cfffff]
[    0.160551] acpiphp: Slot [1] registered
[    0.160560] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[    0.160565] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.160569] pci 0000:00:1c.2:   bridge window [mem 0xf1400000-0xf1bfffff]
[    0.160578] pci 0000:00:1c.2:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.161449] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.161519] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.161621] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.161623] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.161625] vgaarb: loaded
[    0.161626] vgaarb: bridge control possible 0000:00:02.0
[    0.161825] SCSI subsystem initialized
[    0.161863] libata version 3.00 loaded.
[    0.161883] ACPI: bus type USB registered
[    0.161897] usbcore: registered new interface driver usbfs
[    0.161904] usbcore: registered new interface driver hub
[    0.161919] usbcore: registered new device driver usb
[    0.162040] PCI: Using ACPI for IRQ routing
[    0.163727] PCI: pci_cache_line_size set to 64 bytes
[    0.164072] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.164073] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.164074] e820: reserve RAM buffer [mem 0xcec31000-0xcfffffff]
[    0.164075] e820: reserve RAM buffer [mem 0x11e600000-0x11fffffff]
[    0.164179] NetLabel: Initializing
[    0.164181] NetLabel:  domain hash size = 128
[    0.164181] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.164192] NetLabel:  unlabeled traffic allowed by default
[    0.164262] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.164266] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.166282] amd_nb: Cannot enumerate AMD northbridges
[    0.166301] clocksource: Switched to clocksource hpet
[    0.171570] AppArmor: AppArmor Filesystem Enabled
[    0.171632] pnp: PnP ACPI init
[    0.171996] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.171999] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.172000] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.172002] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[    0.172003] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[    0.172005] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.172006] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[    0.172008] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[    0.172009] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[    0.172011] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.172013] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.172014] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.172016] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.172017] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.172019] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[    0.172021] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.172023] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[    0.172026] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.172102] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[    0.172122] system 00:01: [io  0x0400-0x047f] could not be reserved
[    0.172124] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.172125] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.172127] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.172128] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.172130] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.172132] system 00:01: [mem 0xfffff000-0xffffffff] has been reserved
[    0.172134] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.172135] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.172137] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.172139] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.172140] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.172143] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.172186] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.172206] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.172224] pnp 00:04: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active)
[    0.172265] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[    0.172718] pnp: PnP ACPI: found 6 devices
[    0.179291] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.179337] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.179343] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.179349] pci 0000:00:1c.0:   bridge window [mem 0xf1d00000-0xf24fffff]
[    0.179354] pci 0000:00:1c.0:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.179363] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.179369] pci 0000:00:1c.1:   bridge window [mem 0xf1c00000-0xf1cfffff]
[    0.179381] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[    0.179384] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.179390] pci 0000:00:1c.2:   bridge window [mem 0xf1400000-0xf1bfffff]
[    0.179395] pci 0000:00:1c.2:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.179404] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.179406] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.179407] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.179409] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff window]
[    0.179410] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
[    0.179412] pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
[    0.179413] pci_bus 0000:02: resource 1 [mem 0xf1d00000-0xf24fffff]
[    0.179415] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.179416] pci_bus 0000:03: resource 1 [mem 0xf1c00000-0xf1cfffff]
[    0.179418] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.179419] pci_bus 0000:04: resource 1 [mem 0xf1400000-0xf1bfffff]
[    0.179421] pci_bus 0000:04: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.179452] NET: Registered protocol family 2
[    0.179591] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.179654] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.179740] TCP: Hash tables configured (established 32768 bind 32768)
[    0.179759] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.179773] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.179820] NET: Registered protocol family 1
[    0.179833] pci 0000:00:02.0: Video device with shadowed ROM
[    0.180382] PCI: CLS 64 bytes, default 64
[    0.180425] Trying to unpack rootfs image as initramfs...
[    0.698039] Freeing initrd memory: 36860K (ffff8800337f2000 - ffff880035bf1000)
[    0.698068] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.698070] software IO TLB [mem 0xcac31000-0xcec31000] (64MB) mapped at [ffff8800cac31000-ffff8800cec30fff]
[    0.698138] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.698139] hw unit of domain pp0-core 2^-16 Joules
[    0.698140] hw unit of domain package 2^-16 Joules
[    0.698140] hw unit of domain pp1-gpu 2^-16 Joules
[    0.698293] Scanning for low memory corruption every 60 seconds
[    0.698667] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.698707] audit: initializing netlink subsys (disabled)
[    0.698724] audit: type=2000 audit(1479928406.696:1): initialized
[    0.699104] Initialise system trusted keyring
[    0.699204] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.700441] zbud: loaded
[    0.700620] VFS: Disk quotas dquot_6.6.0
[    0.700648] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.700879] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.701080] fuse init (API version 7.23)
[    0.701192] Key type big_key registered
[    0.701207] Allocating IMA MOK and blacklist keyrings.
[    0.701577] Key type asymmetric registered
[    0.701579] Asymmetric key parser 'x509' registered
[    0.701609] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.701644] io scheduler noop registered
[    0.701647] io scheduler deadline registered (default)
[    0.701674] io scheduler cfq registered
[    0.702123] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.702131] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.702153] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    0.702154] vesafb: scrolling: redraw
[    0.702156] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.702164] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000800000, using 4160k, total 4160k
[    0.702241] Console: switching to colour frame buffer device 170x48
[    0.702257] fb0: VESA VGA frame buffer device
[    0.702270] intel_idle: MWAIT substates: 0x21120
[    0.702271] intel_idle: v0.4.1 model 0x3A
[    0.702272] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.702559] ACPI: AC Adapter [AC] (on-line)
[    0.702610] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.702740] ACPI: Lid Switch [LID]
[    0.702772] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.702775] ACPI: Sleep Button [SLPB]
[    0.702810] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.702812] ACPI: Power Button [PWRF]
[    0.704136] thermal LNXTHERM:00: registered as thermal_zone0
[    0.704138] ACPI: Thermal Zone [THM0] (53 C)
[    0.704169] GHES: HEST is not enabled!
[    0.704287] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.711354] ACPI: Battery Slot [BAT0] (battery present)
[    0.726341] 0000:00:16.3: ttyS4 at I/O 0x60b0 (irq = 19, base_baud = 115200) is a 16550A
[    0.726581] Linux agpgart interface v0.103
[    0.738387] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[    0.786380] tpm_tis 00:05: TPM is disabled/deactivated (0x6)
[    0.789292] brd: module loaded
[    0.790317] loop: module loaded
[    0.790518] libphy: Fixed MDIO Bus: probed
[    0.790522] tun: Universal TUN/TAP device driver, 1.6
[    0.790523] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.790565] PPP generic driver version 2.4.2
[    0.790620] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.790624] ehci-pci: EHCI PCI platform driver
[    0.790723] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.790728] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.790743] ehci-pci 0000:00:1a.0: debug port 2
[    0.794641] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.794652] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf253a000
[    0.806349] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.806392] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.806394] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.806395] usb usb1: Product: EHCI Host Controller
[    0.806397] usb usb1: Manufacturer: Linux 4.4.0-47-generic ehci_hcd
[    0.806398] usb usb1: SerialNumber: 0000:00:1a.0
[    0.806566] hub 1-0:1.0: USB hub found
[    0.806576] hub 1-0:1.0: 3 ports detected
[    0.806768] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.806773] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.806787] ehci-pci 0000:00:1d.0: debug port 2
[    0.810693] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.810701] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2539000
[    0.822419] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.822498] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.822501] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.822502] usb usb2: Product: EHCI Host Controller
[    0.822504] usb usb2: Manufacturer: Linux 4.4.0-47-generic ehci_hcd
[    0.822505] usb usb2: SerialNumber: 0000:00:1d.0
[    0.822726] hub 2-0:1.0: USB hub found
[    0.822738] hub 2-0:1.0: 3 ports detected
[    0.822927] ehci-platform: EHCI generic platform driver
[    0.822952] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.822962] ohci-pci: OHCI PCI platform driver
[    0.822977] ohci-platform: OHCI generic platform driver
[    0.822991] uhci_hcd: USB Universal Host Controller Interface driver
[    0.823114] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.823121] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.824215] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[    0.824221] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.824317] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.824319] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.824320] usb usb3: Product: xHCI Host Controller
[    0.824322] usb usb3: Manufacturer: Linux 4.4.0-47-generic xhci-hcd
[    0.824323] usb usb3: SerialNumber: 0000:00:14.0
[    0.824504] hub 3-0:1.0: USB hub found
[    0.824518] hub 3-0:1.0: 4 ports detected
[    0.824884] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.824887] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.824918] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.824920] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.824921] usb usb4: Product: xHCI Host Controller
[    0.824922] usb usb4: Manufacturer: Linux 4.4.0-47-generic xhci-hcd
[    0.824924] usb usb4: SerialNumber: 0000:00:14.0
[    0.825084] hub 4-0:1.0: USB hub found
[    0.825097] hub 4-0:1.0: 4 ports detected
[    0.825539] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.827315] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.827319] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.827566] mousedev: PS/2 mouse device common for all mice
[    0.827893] rtc_cmos 00:02: RTC can wake from S4
[    0.828095] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.828135] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.828142] i2c /dev entries driver
[    0.828192] device-mapper: uevent: version 1.0.3
[    0.828271] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    0.828283] Intel P-state driver initializing.
[    0.828469] ledtrig-cpu: registered to indicate activity on CPUs
[    0.829001] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.829235] NET: Registered protocol family 10
[    0.829592] NET: Registered protocol family 17
[    0.829617] Key type dns_resolver registered
[    0.829966] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1c
[    0.829980] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1c
[    0.829991] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1c
[    0.830007] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1c
[    0.830079] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.830405] registered taskstats version 1
[    0.830438] Loading compiled-in X.509 certificates
[    0.832184] Loaded X.509 cert 'Build time autogenerated kernel key: f7bc719d96df7c6d6fed8f4b9fd5d4ff001383c8'
[    0.832221] zswap: loaded using pool lzo/zbud
[    0.835155] Key type trusted registered
[    0.837755] Key type encrypted registered
[    0.837762] AppArmor: AppArmor sha1 policy hashing enabled
[    0.858466] tpm_tis 00:05: A TPM error (6) occurred attempting to read a pcr value
[    0.858479] ima: No TPM chip found, activating TPM-bypass!
[    0.858510] evm: HMAC attrs: 0x1
[    0.859080]   Magic number: 8:942:243
[    0.859197] rtc_cmos 00:02: setting system clock to 2016-11-23 19:13:27 UTC (1479928407)
[    0.859349] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.859351] EDD information not available.
[    0.859418] PM: Hibernation image not present or could not be loaded.
[    0.860329] Freeing unused kernel memory: 1480K (ffffffff81f43000 - ffffffff820b5000)
[    0.860330] Write protecting the kernel read-only data: 14336k
[    0.860686] Freeing unused kernel memory: 1804K (ffff88000183d000 - ffff880001a00000)
[    0.860987] Freeing unused kernel memory: 144K (ffff880001ddc000 - ffff880001e00000)
[    0.868490] random: systemd-udevd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    0.868549] random: systemd-udevd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    0.868560] random: systemd-udevd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    0.868966] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    0.869010] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    0.869190] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    0.869230] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    0.869267] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    0.869307] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    0.869345] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    0.888344] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    0.895643] wmi: Mapper loaded
[    0.900427] [drm] Initialized drm 1.1.0 20060810
[    0.901013] pps_core: LinuxPPS API ver. 1 registered
[    0.901015] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.901984] PTP clock support registered
[    0.902518] sdhci: Secure Digital Host Controller Interface driver
[    0.902520] sdhci: Copyright(c) Pierre Ossman
[    0.904317] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7)
[    0.904804] sdhci-pci 0000:02:00.0: No vmmc regulator found
[    0.904807] sdhci-pci 0000:02:00.0: No vqmmc regulator found
[    0.906184] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[    0.907037] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.907039] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.907182] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.118426] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.134429] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.162844] e1000e 0000:00:19.0 eth0: registered PHC clock
[    1.162848] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:92:ae:7e
[    1.162850] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.162917] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    1.162951] ahci 0000:00:1f.2: version 3.0
[    1.163102] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.163639] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.178469] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
[    1.178473] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst 
[    1.195053] scsi host0: ahci
[    1.195160] scsi host1: ahci
[    1.195244] scsi host2: ahci
[    1.195330] scsi host3: ahci
[    1.195413] scsi host4: ahci
[    1.195499] scsi host5: ahci
[    1.195535] ata1: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538100 irq 26
[    1.195538] ata2: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538180 irq 26
[    1.195539] ata3: DUMMY
[    1.195540] ata4: DUMMY
[    1.195542] ata5: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538300 irq 26
[    1.195542] ata6: DUMMY
[    1.196300] [drm] Memory usable by graphics device = 2048M
[    1.196303] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[    1.196304] fb: switching to inteldrmfb from VESA VGA
[    1.196337] Console: switching to colour dummy device 80x25
[    1.196386] [drm] Replacing VGA console driver
[    1.202451] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.202453] [drm] Driver supports precise vblank timestamp query.
[    1.202836] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.251221] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.251224] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.251687] hub 1-1:1.0: USB hub found
[    1.251925] hub 1-1:1.0: 6 ports detected
[    1.266894] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.266901] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.267186] hub 2-1:1.0: USB hub found
[    1.267349] hub 2-1:1.0: 8 ports detected
[    1.430420] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[    1.514467] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.522431] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    1.526157] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.526166] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.526170] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.536124] ata1.00: ATA-9: INTEL SSDSC2BW180A3L, LF1i, max UDMA/133
[    1.536131] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.546128] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.546136] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.546140] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.556150] ata1.00: configured for UDMA/133
[    1.556524] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2BW18 LF1i PQ: 0 ANSI: 5
[    1.556891] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/168 GiB)
[    1.556900] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.556974] sd 0:0:0:0: [sda] Write Protect is off
[    1.556978] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.557014] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.557432]  sda: sda1 sda2 sda4
[    1.557709] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.616636] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020
[    1.616638] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.616640] usb 1-1.3: Product: Biometric Coprocessor
[    1.616641] usb 1-1.3: Manufacturer: Auth
[    1.683590] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[    1.686441] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[    1.694416] tsc: Refined TSC clocksource calibration: 2594.108 MHz
[    1.694424] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647e07037, max_idle_ns: 440795273876 ns
[    1.714560] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[    1.775882] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
[    1.775900] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    1.783837] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[    1.783840] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.783842] usb 1-1.4: Product: BCM20702A0
[    1.783843] usb 1-1.4: Manufacturer: Broadcom Corp
[    1.783844] usb 1-1.4: SerialNumber: 2CD05A7E976E
[    1.814077] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    1.854467] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[    1.882468] ata2: SATA link down (SStatus 0 SControl 300)
[    1.955532] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d2
[    1.955535] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.955537] usb 1-1.6: Product: Integrated Camera
[    1.955538] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
[    2.103184] fbcon: inteldrmfb (fb0) is primary device
[    2.103275] Console: switching to colour frame buffer device 170x48
[    2.103298] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.103587] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    2.104367] acpi device:00: registered as cooling_device4
[    2.104464] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    2.105284] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[    2.210485] ata5: SATA link down (SStatus 0 SControl 300)
[    2.694694] clocksource: Switched to clocksource tsc
[    2.772503] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A
[    2.772536] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[    5.961632] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    6.160343] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6
[    7.277519] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    7.338565] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    7.338674] systemd[1]: Detected architecture x86-64.
[    7.338851] systemd[1]: Set hostname to <thierry-ThinkPad-X230>.
[    7.398813] systemd[1]: Created slice System Slice.
[    7.398859] systemd[1]: Listening on fsck to fsckd communication Socket.
[    7.398887] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.398916] systemd[1]: Listening on Journal Socket.
[    7.414916] systemd[1]: Started Braille Device Support.
[    7.415166] systemd[1]: Listening on udev Control Socket.
[    7.415189] systemd[1]: Reached target User and Group Name Lookups.
[    7.415224] systemd[1]: Listening on Syslog Socket.
[    7.416086] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.416533] systemd[1]: Started Read required files in advance.
[    7.417000] systemd[1]: Starting Uncomplicated firewall...
[    7.417497] systemd[1]: Mounting Huge Pages File System...
[    7.417651] systemd[1]: Created slice User and Session Slice.
[    7.419163] systemd[1]: Starting Load Kernel Modules...
[    7.419182] systemd[1]: Reached target Remote File Systems (Pre).
[    7.419203] systemd[1]: Reached target Remote File Systems.
[    7.420075] systemd[1]: Mounting Debug File System...
[    7.420106] systemd[1]: Reached target Encrypted Volumes.
[    7.420337] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.420378] systemd[1]: Listening on udev Kernel Socket.
[    7.421455] systemd[1]: Starting Set console keymap...
[    7.422166] systemd[1]: Mounting POSIX Message Queue File System...
[    7.422207] systemd[1]: Reached target Slices.
[    7.422486] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.424063] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.424099] systemd[1]: Reached target Swap.
[    7.424186] systemd[1]: Listening on Journal Audit Socket.
[    7.424625] systemd[1]: Starting Journal Service...
[    7.427337] systemd[1]: Mounted Debug File System.
[    7.427379] systemd[1]: Mounted Huge Pages File System.
[    7.427399] systemd[1]: Mounted POSIX Message Queue File System.
[    7.427566] systemd[1]: Started Uncomplicated firewall.
[    7.428068] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    7.432279] lp: driver loaded but no devices found
[    7.435008] ppdev: user-space parallel port driver
[    7.438156] systemd[1]: Started Load Kernel Modules.
[    7.455488] systemd[1]: Started Journal Service.
[    7.513767] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[    7.555062] systemd-journald[254]: Received request to flush runtime journal from PID 1
[    7.659161] audit: type=1400 audit(1479928414.295:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=493 comm="apparmor_parser"
[    7.659170] audit: type=1400 audit(1479928414.295:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=493 comm="apparmor_parser"
[    7.659177] audit: type=1400 audit(1479928414.295:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=493 comm="apparmor_parser"
[    7.659183] audit: type=1400 audit(1479928414.295:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=493 comm="apparmor_parser"
[    7.662305] audit: type=1400 audit(1479928414.295:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=497 comm="apparmor_parser"
[    7.662315] audit: type=1400 audit(1479928414.295:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=497 comm="apparmor_parser"
[    7.665877] audit: type=1400 audit(1479928414.299:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=498 comm="apparmor_parser"
[    7.669737] audit: type=1400 audit(1479928414.303:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=492 comm="apparmor_parser"
[    7.669749] audit: type=1400 audit(1479928414.303:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=492 comm="apparmor_parser"
[    7.670090] audit: type=1400 audit(1479928414.303:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=499 comm="apparmor_parser"
[    7.718126] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.721879] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB_.PCI0.LPC_.PMIO) (20150930/utaddress-254)
[    7.721886] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.721890] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPC_.LPIO) (20150930/utaddress-254)
[    7.721894] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.721895] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPC_.LPIO) (20150930/utaddress-254)
[    7.721899] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.721900] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPC_.LPIO) (20150930/utaddress-254)
[    7.721903] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.721904] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.752144] Non-volatile memory driver v1.3
[    7.767745] Intel(R) Wireless WiFi driver for Linux
[    7.767747] Copyright(c) 2003- 2015 Intel Corporation
[    7.767968] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    7.768733] media: Linux media interface: v0.10
[    7.771327] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    7.771331] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.771334] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[    7.771336] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    7.771338] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    7.771340] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    7.771342] snd_hda_codec_realtek hdaudioC0D0:      Dock Mic=0x19
[    7.771344] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    7.780094] Linux video capture interface: v2.00
[    7.780763] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    7.780766] thinkpad_acpi: http://ibm-acpi.sf.net/
[    7.780767] thinkpad_acpi: ThinkPad BIOS G2ETA7WW (2.67 ), EC unknown
[    7.780769] thinkpad_acpi: Lenovo ThinkPad X230, model 2325UQT
[    7.781307] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[    7.782171] thinkpad_acpi: radio switch found; radios are enabled
[    7.782189] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    7.782191] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    7.783595] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    7.783752] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    7.785313] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    7.798679] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[    7.814553] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d2)
[    7.821669] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    7.821672] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[    7.821674] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    7.821677] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[    7.821840] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[    7.830068] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    7.830159] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    7.830340] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    7.831157] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    7.831328] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    7.831458] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    7.831527] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    7.835981] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input16
[    7.836046] usbcore: registered new interface driver uvcvideo
[    7.836048] USB Video Class driver (1.1.1)
[    7.845129] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    7.851215] AVX version of gcm_enc/dec engaged.
[    7.851217] AES CTR mode by8 optimization enabled
[    7.861597] Bluetooth: Core ver 2.21
[    7.861611] NET: Registered protocol family 31
[    7.861613] Bluetooth: HCI device and connection manager initialized
[    7.861617] Bluetooth: HCI socket layer initialized
[    7.861619] Bluetooth: L2CAP socket layer initialized
[    7.861625] Bluetooth: SCO socket layer initialized
[    7.870365] usbcore: registered new interface driver btusb
[    7.878307] Bluetooth: hci0: BCM: chip id 63
[    7.896504] Bluetooth: hci0: thierry-ThinkPad-X230
[    7.898145] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[    7.898623] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[    7.898628] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[    7.925705] kvm: disabled by bios
[    7.941329] intel_rapl: Found RAPL domain package
[    7.941333] intel_rapl: Found RAPL domain core
[    7.941335] intel_rapl: Found RAPL domain uncore
[    7.941340] intel_rapl: RAPL package 0 domain package locked by BIOS
[    7.966848] cfg80211: World regulatory domain updated:
[    7.966851] cfg80211:  DFS Master region: unset
[    7.966853] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    7.966855] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    7.966857] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    7.966859] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    7.966861] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    7.966864] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    7.966866] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    7.966868] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    7.966869] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    7.968348] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    8.320413] random: nonblocking pool is initialized
[    8.546230] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    8.778906] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    8.783276] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    8.783405] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[    8.790122] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[    8.790209] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[    8.843118] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.843121] Bluetooth: BNEP filters: protocol multicast
[    8.843125] Bluetooth: BNEP socket layer initialized
[    9.058152] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[    9.064901] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[    9.064989] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[    9.146181] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    9.255907] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    9.395753] Bluetooth: RFCOMM TTY layer initialized
[    9.395759] Bluetooth: RFCOMM socket layer initialized
[    9.395763] Bluetooth: RFCOMM ver 1.11
[   16.084499] wlp3s0: authenticate with 5c:83:8f:0c:b4:af
[   16.087397] wlp3s0: send auth to 5c:83:8f:0c:b4:af (try 1/3)
[   16.129131] wlp3s0: authenticated
[   16.129367] wlp3s0: waiting for beacon from 5c:83:8f:0c:b4:af
[   16.235058] wlp3s0: associate with 5c:83:8f:0c:b4:af (try 1/3)
[   16.236388] wlp3s0: RX AssocResp from 5c:83:8f:0c:b4:af (capab=0x101 status=0 aid=48)
[   16.238516] wlp3s0: associated
[   16.238567] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   16.242479] cfg80211: Regulatory domain changed to country: FR
[   16.242484] cfg80211:  DFS Master region: ETSI
[   16.242485] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   16.242487] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   16.242489] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   16.242492] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   16.242494] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[   16.242495] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   16.337014] wlp3s0: Limiting TX power to 18 dBm as advertised by 5c:83:8f:0c:b4:af

Bougron · Le 23/11/2016, à 22:33

Je n'ai rien vu d'anormal dans cette trace. Il est rare que le wifi s'initialise en 1 seconde.

titi118 · Le 24/11/2016, à 00:57

Super! Et bah merci beaucoup, tu m'as bien aidé!

EmW · Le 02/12/2016, à 11:30

bonjour, j' ai le même problème de lenteur, suite à une mise à jour me semble-t-il. Est ce que je peux simplement appliquer la même technique qui semble avoir fonctionné ? Est ce que je ferais mieux de lancer une nouvelle discussion? Merci

Bougron · Le 02/12/2016, à 11:43

Bonjour...
Si tu sais faire le diagnostic..... de la partition swap non présente.
Sinon
1) indiques la durée du boot: 1 minute, 10 minutes? 1 heure?
2) Fais un boot-info: https://doc.ubuntu-fr.org/tutoriel/boot-info
3) Donnes le retour de

dmesg | tail -500

Dernière modification par Bougron (Le 02/12/2016, à 11:46)

EmW · Le 02/12/2016, à 14:02

Bonjour , merci de m' avoir répondu.
il prend environ une ou deux minutes avant d' être opérationnel, Tout est en place sur l" écran mais tout est à l' arrêt, impossible à utiliser.

Le retour de . dmesg | tail -500 est très long, le voici :

[    0.978137] hub 2-0:1.0: 10 ports detected
[    0.978216] uhci_hcd: USB Universal Host Controller Interface driver
[    0.978274] usbcore: registered new interface driver libusual
[    0.978321] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.980954] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.980961] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.981124] mousedev: PS/2 mouse device common for all mice
[    0.981297] rtc_cmos 00:05: RTC can wake from S4
[    0.981437] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.981476] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.981569] device-mapper: uevent: version 1.0.3
[    0.981650] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.981680] EISA: Probing bus 0 at eisa.0
[    0.981683] EISA: Cannot allocate resource for mainboard
[    0.981685] Cannot allocate resource for EISA slot 1
[    0.981687] Cannot allocate resource for EISA slot 2
[    0.981689] Cannot allocate resource for EISA slot 3
[    0.981691] Cannot allocate resource for EISA slot 4
[    0.981692] Cannot allocate resource for EISA slot 5
[    0.981694] Cannot allocate resource for EISA slot 6
[    0.981696] Cannot allocate resource for EISA slot 7
[    0.981698] Cannot allocate resource for EISA slot 8
[    0.981700] EISA: Detected 0 cards.
[    0.981712] cpufreq-nforce2: No nForce2 chipset.
[    0.981715] cpuidle: using governor ladder
[    0.981717] cpuidle: using governor menu
[    0.981719] EFI Variables Facility v0.08 2004-May-17
[    0.982018] TCP cubic registered
[    0.982140] NET: Registered protocol family 10
[    0.982725] NET: Registered protocol family 17
[    0.982730] Registering the dns_resolver key type
[    0.982760] Using IPI No-Shortcut mode
[    0.982887] PM: Hibernation image not present or could not be loaded.
[    0.982901] registered taskstats version 1
[    0.992182]   Magic number: 12:957:96
[    0.992301] rtc_cmos 00:05: setting system clock to 2016-12-01 22:04:03 UTC (1480629843)
[    0.992319] powernow-k8: Found 1 AMD Phenom(tm) 9500 Quad-Core Processor (4 cpu cores) (version 2.20.00)
[    0.992354] powernow-k8:    0 : pstate 0 (2200 MHz)
[    0.992357] powernow-k8:    1 : pstate 1 (1100 MHz)
[    0.992706] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.992709] EDD information not available.
[    0.992893] Freeing unused kernel memory: 724k freed
[    0.993315] Write protecting the kernel text: 5688k
[    0.993381] Write protecting the kernel read-only data: 2352k
[    1.018393] udevd[96]: starting version 175
[    1.051560] Btrfs loaded
[    1.056888] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.057096] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[    1.057104] forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[    1.057113] forcedeth 0000:00:07.0: setting latency timer to 64
[    1.066948] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[    1.066977] firewire_ohci 0000:01:05.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[    1.120143] firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[    1.288028] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[    1.421847] hub 1-2:1.0: USB hub found
[    1.422174] hub 1-2:1.0: 4 ports detected
[    1.444043] Refined TSC clocksource calibration: 2210.050 MHz.
[    1.444052] Switching to clocksource tsc
[    1.580966] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:8c:4d:08:9e
[    1.580972] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[    1.581006] sata_nv 0000:00:08.0: version 3.5
[    1.581027] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
[    1.581106] sata_nv 0000:00:08.0: setting latency timer to 64
[    1.581423] scsi0 : sata_nv
[    1.581531] scsi1 : sata_nv
[    1.581671] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 20
[    1.581674] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 20
[    1.581698] sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 21 (level, low) -> IRQ 21
[    1.581730] sata_nv 0000:00:08.1: setting latency timer to 64
[    1.581980] scsi2 : sata_nv
[    1.582047] scsi3 : sata_nv
[    1.582154] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 21
[    1.582157] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 21
[    1.582189] pata_amd 0000:00:06.0: version 0.4.1
[    1.582249] pata_amd 0000:00:06.0: setting latency timer to 64
[    1.582627] scsi4 : pata_amd
[    1.582734] scsi5 : pata_amd
[    1.583154] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    1.583157] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    1.588023] usb 1-8: new high-speed USB device number 5 using ehci_hcd
[    1.620095] firewire_core: created device fw0: GUID 001e8c00000d4ad0, S400
[    1.721961] hub 1-8:1.0: USB hub found
[    1.722296] hub 1-8:1.0: 4 ports detected
[    1.832018] usb 1-10: new high-speed USB device number 6 using ehci_hcd
[    2.048035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.048043] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.056169] ata3.00: ATAPI: TSSTcorp CDDVDW TS-H653N, 0208, max UDMA/33
[    2.056710] ata1.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
[    2.056714] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.064706] ata1.00: configured for UDMA/133
[    2.064878] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
[    2.065095] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.065224] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.065338] sd 0:0:0:0: [sda] Write Protect is off
[    2.065342] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.065381] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.072121] ata3.00: configured for UDMA/33
[    2.097956]  sda: sda1 sda2 < sda5 >
[    2.098349] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.428021] usb 2-1: new low-speed USB device number 2 using ohci_hcd
[    2.532042] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.540140] ata2.00: ATA-7: ST3500630AS, 3.CHL, max UDMA/100
[    2.540145] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.556145] ata2.00: configured for UDMA/100
[    2.556300] scsi 1:0:0:0: Direct-Access     ATA      ST3500630AS      3.CH PQ: 0 ANSI: 5
[    2.556460] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.556505] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.556538] sd 1:0:0:0: [sdb] Write Protect is off
[    2.556542] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.556566] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.557351] scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-H653N  0208 PQ: 0 ANSI: 5
[    2.559876] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.559880] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.560022] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.560114] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    2.591551]  sdb: sdb1 sdb2 < sdb5 >
[    2.591933] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.882309] ata4: SATA link down (SStatus 0 SControl 300)
[    2.882384] ata6: port disabled--ignoring
[    2.890334] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input2
[    2.890466] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1/input0
[    2.890490] usbcore: registered new interface driver usbhid
[    2.890492] usbhid: USB HID core driver
[    2.948013] usb 2-4: new low-speed USB device number 3 using ohci_hcd
[    3.005538] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.171318] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input3
[    3.171411] generic-usb 0003:0603:00F2.0002: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:02.0-4/input0
[    3.185100] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/input/input4
[    3.185225] generic-usb 0003:0603:00F2.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:02.0-4/input1
[    3.256016] usb 1-8.1: new low-speed USB device number 7 using ehci_hcd
[    3.358240] generic-usb 0003:147A:E018.0004: hiddev0,hidraw3: USB HID v1.00 Device [Formosa21 Beanbag Emulation Device] on usb-0000:00:02.1-8.1/input1
[    3.428020] usb 1-8.2: new high-speed USB device number 8 using ehci_hcd
[    4.232016] usb 1-8.3: new high-speed USB device number 9 using ehci_hcd
[   24.834588] Initializing USB Mass Storage driver...
[   24.834738] scsi6 : usb-storage 1-8.2:1.0
[   24.834873] scsi7 : usb-storage 1-8.3:1.2
[   24.834931] usbcore: registered new interface driver usb-storage
[   24.834934] USB Mass Storage support registered.
[   25.042326] Adding 3142652k swap on /dev/sda5.  Priority:-1 extents:1 across:3142652k 
[   25.056363] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   25.080910] udevd[489]: starting version 175
[   25.096109] lp: driver loaded but no devices found
[   25.143264] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[   25.143296] i2c i2c-1: nForce2 SMBus adapter at 0x1c40
[   25.193294] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   25.267696] type=1400 audit(1480629867.768:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=669 comm="apparmor_parser"
[   25.268214] type=1400 audit(1480629867.772:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=669 comm="apparmor_parser"
[   25.268490] type=1400 audit(1480629867.772:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=669 comm="apparmor_parser"
[   25.386908] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[   25.389512] Linux video capture interface: v2.00
[   25.407532] IR NEC protocol handler initialized
[   25.417944] IR RC5(x) protocol handler initialized
[   25.422916] cfg80211: Calling CRDA to update world regulatory domain
[   25.429096] IR RC6 protocol handler initialized
[   25.437608] IR JVC protocol handler initialized
[   25.441864] Registered IR keymap rc-rc6-mce
[   25.442109] input: Media Center Ed. eHome Infrared Remote Transceiver (147a:e018) as /devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.1/1-8.1:1.0/rc/rc0/input5
[   25.443149] rc0: Media Center Ed. eHome Infrared Remote Transceiver (147a:e018) as /devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.1/1-8.1:1.0/rc/rc0
[   25.445993] cx23885 driver version 0.0.3 loaded
[   25.446221] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[   25.446247] cx23885 0000:04:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[   25.446372] CORE cx23885[0]: subsystem: 0070:71d3, board: Hauppauge WinTV-HVR1200 [card=7,autodetected]
[   25.448783] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[   25.448793] snd_hda_intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
[   25.448799] hda_intel: Disabling MSI
[   25.448828] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[   25.455938] IR Sony protocol handler initialized
[   25.463739] nvidia: module license 'NVIDIA' taints kernel.
[   25.463745] Disabling lock debugging due to kernel taint
[   25.468812] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input6
[   25.482419] IR MCE Keyboard/mouse protocol handler initialized
[   25.498384] usblp0: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x03F0 pid 0xC202
[   25.498560] usbcore: registered new interface driver usblp
[   25.502738] lirc_dev: IR Remote Control driver registered, major 249 
[   25.503563] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[   25.503567] IR LIRC bridge handler initialized
[   25.572031] usb 1-10: reset high-speed USB device number 6 using ehci_hcd
[   25.604402] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[   25.604414] nvidia 0000:02:00.0: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
[   25.604427] nvidia 0000:02:00.0: setting latency timer to 64
[   25.604434] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   25.604656] NVRM: loading NVIDIA UNIX x86 Kernel Module  304.132  Fri Sep 16 11:22:35 PDT 2016
[   25.612252] tveeprom 2-0050: Hauppauge model 71949, rev H2E9, serial# 3062154
[   25.612257] tveeprom 2-0050: MAC address is 00:0d:fe:2e:b9:8a
[   25.612260] tveeprom 2-0050: tuner model is Philips 18271_8295 (idx 149, type 54)
[   25.612264] tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[   25.612267] tveeprom 2-0050: audio processor is CX23885 (idx 39)
[   25.612269] tveeprom 2-0050: decoder processor is CX23885 (idx 33)
[   25.612272] tveeprom 2-0050: has no radio
[   25.612274] cx23885[0]: hauppauge eeprom: model=71949
[   25.612280] cx23885_dvb_register() allocating 1 frontend(s)
[   25.612443] cx23885[0]: cx23885 based dvb card
[   25.615938] Bluetooth: Core ver 2.16
[   25.615976] NET: Registered protocol family 31
[   25.615978] Bluetooth: HCI device and connection manager initialized
[   25.615984] Bluetooth: HCI socket layer initialized
[   25.615986] Bluetooth: L2CAP socket layer initialized
[   25.615993] Bluetooth: SCO socket layer initialized
[   25.625344] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   25.625349] Bluetooth: BNEP filters: protocol multicast
[   25.640090] tda829x 3-0042: type set to tda8295
[   25.640115] Bluetooth: RFCOMM TTY layer initialized
[   25.640122] Bluetooth: RFCOMM socket layer initialized
[   25.640124] Bluetooth: RFCOMM ver 1.11
[   25.668277] ppdev: user-space parallel port driver
[   25.681919] tda18271 3-0060: creating new instance
[   25.685713] cfg80211: World regulatory domain updated:
[   25.685719] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   25.685723] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.685726] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.685729] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.685732] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.685734] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.712057] mceusb 1-8.1:1.0: Registered Formosa21 Beanbag Emulation Device with mce emulator interface version 1
[   25.712063] mceusb 1-8.1:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active)
[   25.712113] usbcore: registered new interface driver mceusb
[   25.718566] type=1400 audit(1480629868.220:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1076 comm="apparmor_parser"
[   25.719144] type=1400 audit(1480629868.220:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1076 comm="apparmor_parser"
[   25.723379] TDA18271HD/C1 detected @ 3-0060
[   25.752571] init: failsafe main process (1043) killed by TERM signal
[   25.803985] type=1400 audit(1480629868.304:7): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1138 comm="apparmor_parser"
[   25.804634] type=1400 audit(1480629868.308:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1140 comm="apparmor_parser"
[   25.804924] type=1400 audit(1480629868.308:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1139 comm="apparmor_parser"
[   25.805131] type=1400 audit(1480629868.308:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1140 comm="apparmor_parser"
[   25.805318] type=1400 audit(1480629868.308:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1139 comm="apparmor_parser"
[   25.832725] scsi 7:0:0:0: Direct-Access     HP       Photosmart 8200  1.00 PQ: 0 ANSI: 2
[   25.833388] sd 7:0:0:0: Attached scsi generic sg3 type 0
[   25.835702] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[   25.838586] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[   25.844960] scsi 6:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[   25.851211] scsi 6:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[   25.857590] scsi 6:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[   25.858206] sd 6:0:0:0: Attached scsi generic sg4 type 0
[   25.858388] sd 6:0:0:1: Attached scsi generic sg5 type 0
[   25.858549] sd 6:0:0:2: Attached scsi generic sg6 type 0
[   25.858737] sd 6:0:0:3: Attached scsi generic sg7 type 0
[   25.866573] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[   25.867704] sd 6:0:0:1: [sde] Attached SCSI removable disk
[   25.869572] sd 6:0:0:2: [sdf] Attached SCSI removable disk
[   25.871446] sd 6:0:0:3: [sdg] Attached SCSI removable disk
[   25.978557] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[   26.061752] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   26.061758] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   26.061761] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   26.061765] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   26.061767] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   26.061770] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   26.061772] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   26.061775] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   26.061778] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   26.061780] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   26.061783] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   26.061785] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   26.061788] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   26.061791] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   26.061793] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   26.061796] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   26.061798] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   26.061801] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   26.061803] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   26.061806] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   26.061808] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   26.061811] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   26.061814] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   26.061817] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   26.061819] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   26.061822] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   26.061824] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   26.061827] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   26.071006] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   26.071728] Registered led device: rt73usb-phy0::radio
[   26.071755] Registered led device: rt73usb-phy0::assoc
[   26.071775] Registered led device: rt73usb-phy0::quality
[   26.072265] usbcore: registered new interface driver rt73usb
[   26.132030] hda_codec: ALC1200: BIOS auto-probing.
[   26.132037] hda_codec: ALC1200: SKU not ready 0x411111f0
[   26.145297] init: alsa-restore main process (1271) terminated with status 19
[   26.797977] DVB: registering new adapter (cx23885[0])
[   26.797984] DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)...
[   26.798399] cx23885_dev_checkrevision() Hardware revision = 0xb0
[   26.798405] cx23885[0]/0: found at 0000:04:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xfd800000
[   26.798414] cx23885 0000:04:00.0: setting latency timer to 64
[   27.380120] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
[   27.380229] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[   27.380313] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[   27.380394] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
[   27.380480] input: HDA NVidia Line-Out Side as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
[   27.380561] input: HDA NVidia Line-Out CLFE as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
[   27.380646] input: HDA NVidia Line-Out Surround as /devices/pci0000:00/0000:00:05.0/sound/card0/input13
[   27.380733] input: HDA NVidia Line-Out Front as /devices/pci0000:00/0000:00:05.0/sound/card0/input14
[   27.910209] init: plymouth-splash main process (1642) terminated with status 1
[   27.919580] init: gdm main process (1648) killed by TERM signal
[   37.008007] eth0: no IPv6 routers present
[ 5199.274327] usb 1-8: USB disconnect, device number 5
[ 5199.274336] usb 1-8.1: USB disconnect, device number 7
[ 5199.476248] usb 1-8.2: USB disconnect, device number 8
[ 5199.488125] usb 1-8.3: USB disconnect, device number 9
[ 5199.488302] usblp0: removed
[ 5199.728049] usb 1-8: new high-speed USB device number 10 using ehci_hcd
[ 5199.862086] hub 1-8:1.0: USB hub found
[ 5199.862407] hub 1-8:1.0: 4 ports detected
[ 5200.132042] usb 1-8.1: new low-speed USB device number 11 using ehci_hcd
[ 5200.234412] Registered IR keymap rc-rc6-mce
[ 5200.234602] input: Media Center Ed. eHome Infrared Remote Transceiver (147a:e018) as /devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.1/1-8.1:1.0/rc/rc1/input15
[ 5200.234809] rc1: Media Center Ed. eHome Infrared Remote Transceiver (147a:e018) as /devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.1/1-8.1:1.0/rc/rc1
[ 5200.235107] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input16
[ 5200.236887] rc rc1: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[ 5200.492088] mceusb 1-8.1:1.0: Registered Formosa21 Beanbag Emulation Device with mce emulator interface version 1
[ 5200.492095] mceusb 1-8.1:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active)
[ 5200.494900] generic-usb 0003:147A:E018.0005: hiddev0,hidraw3: USB HID v1.00 Device [Formosa21 Beanbag Emulation Device] on usb-0000:00:02.1-8.1/input1
[ 5200.564044] usb 1-8.2: new high-speed USB device number 12 using ehci_hcd
[ 5201.297325] scsi8 : usb-storage 1-8.2:1.0
[ 5201.368032] usb 1-8.3: new high-speed USB device number 13 using ehci_hcd
[ 5201.461738] usblp0: USB Bidirectional printer dev 13 if 0 alt 0 proto 2 vid 0x03F0 pid 0xC202
[ 5201.462150] scsi9 : usb-storage 1-8.3:1.2
[ 5202.302704] scsi 8:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[ 5202.309065] scsi 8:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[ 5202.315436] scsi 8:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[ 5202.321811] scsi 8:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[ 5202.322907] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 5202.323445] sd 8:0:0:1: Attached scsi generic sg4 type 0
[ 5202.324825] sd 8:0:0:2: Attached scsi generic sg5 type 0
[ 5202.325378] sd 8:0:0:3: Attached scsi generic sg6 type 0
[ 5202.330567] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 5202.332310] sd 8:0:0:1: [sdd] Attached SCSI removable disk
[ 5202.333184] sd 8:0:0:2: [sde] Attached SCSI removable disk
[ 5202.335181] sd 8:0:0:3: [sdf] Attached SCSI removable disk
[ 5202.460683] scsi 9:0:0:0: Direct-Access     HP       Photosmart 8200  1.00 PQ: 0 ANSI: 2
[ 5202.461389] sd 9:0:0:0: Attached scsi generic sg7 type 0
[ 5202.464291] sd 9:0:0:0: [sdg] Attached SCSI removable disk
[ 5202.654967] usblp0: removed
[ 5202.657016] usblp0: USB Bidirectional printer dev 13 if 0 alt 0 proto 2 vid 0x03F0 pid 0xC202
[ 7074.136033] usb 1-2.1: new high-speed USB device number 14 using ehci_hcd
[ 7138.961612] usb 1-2.1: USB disconnect, device number 14
[11452.284994] usb 1-8: USB disconnect, device number 10
[11452.285003] usb 1-8.1: USB disconnect, device number 11
[11452.592239] usb 1-8.2: USB disconnect, device number 12
[11452.596970] usb 1-8.3: USB disconnect, device number 13
[11452.597300] usblp0: removed
[11452.856045] usb 1-8: new high-speed USB device number 15 using ehci_hcd
[11452.990037] hub 1-8:1.0: USB hub found
[11452.990323] hub 1-8:1.0: 4 ports detected
[11453.260032] usb 1-8.1: new low-speed USB device number 16 using ehci_hcd
[11453.362333] Registered IR keymap rc-rc6-mce
[11453.362518] input: Media Center Ed. eHome Infrared Remote Transceiver (147a:e018) as /devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.1/1-8.1:1.0/rc/rc2/input17
[11453.362627] rc2: Media Center Ed. eHome Infrared Remote Transceiver (147a:e018) as /devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.1/1-8.1:1.0/rc/rc2
[11453.362831] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input18
[11453.363066] rc rc2: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[11453.616066] mceusb 1-8.1:1.0: Registered Formosa21 Beanbag Emulation Device with mce emulator interface version 1
[11453.616076] mceusb 1-8.1:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active)
[11453.619260] generic-usb 0003:147A:E018.0006: hiddev0,hidraw3: USB HID v1.00 Device [Formosa21 Beanbag Emulation Device] on usb-0000:00:02.1-8.1/input1
[11453.692031] usb 1-8.2: new high-speed USB device number 17 using ehci_hcd
[11454.421220] scsi10 : usb-storage 1-8.2:1.0
[11454.492035] usb 1-8.3: new high-speed USB device number 18 using ehci_hcd
[11454.585688] usblp0: USB Bidirectional printer dev 18 if 0 alt 0 proto 2 vid 0x03F0 pid 0xC202
[11454.586115] scsi11 : usb-storage 1-8.3:1.2
[11455.426758] scsi 10:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[11455.433110] scsi 10:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[11455.439477] scsi 10:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[11455.445862] scsi 10:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[11455.446948] sd 10:0:0:0: Attached scsi generic sg3 type 0
[11455.447462] sd 10:0:0:1: Attached scsi generic sg4 type 0
[11455.447799] sd 10:0:0:2: Attached scsi generic sg5 type 0
[11455.448302] sd 10:0:0:3: Attached scsi generic sg6 type 0
[11455.455207] sd 10:0:0:0: [sdc] Attached SCSI removable disk
[11455.456471] sd 10:0:0:2: [sde] Attached SCSI removable disk
[11455.458471] sd 10:0:0:1: [sdd] Attached SCSI removable disk
[11455.459483] sd 10:0:0:3: [sdf] Attached SCSI removable disk
[11455.584853] scsi 11:0:0:0: Direct-Access     HP       Photosmart 8200  1.00 PQ: 0 ANSI: 2
[11455.586937] sd 11:0:0:0: Attached scsi generic sg7 type 0
[11455.590840] sd 11:0:0:0: [sdg] Attached SCSI removable disk
[11455.649858] usblp0: removed
[11455.659284] usblp0: USB Bidirectional printer dev 18 if 0 alt 0 proto 2 vid 0x03F0 pid 0xC202

Modération : prière d'utiliser les balises code s'il vous plaît. Explications ici

Dernière modification par Ayral (Le 02/12/2016, à 16:01)

EmW · Le 02/12/2016, à 14:07

et en même temps que le problème de lenteur , est apparu un autre problème peut-être lié je ne sais pas : les icônes du lanceur ont disparu. Le lanceur est toujours là et les différents dossiers et programmes aussi, on peut les utiliser en passant la souris dessus, mais il faut y aller à l' aveugle. J' ai lancé une discussion sur le sujet mais mon " interlocuteur" m' a lâché semble-t-il. Au cas où la réponse à ce bug serait dans cette longue liste copiée ci dessus, je le signale.

Bougron · Le 02/12/2016, à 14:22

Tu aurais pu voir comment titi118 a présenté son résultat.
Je savais que tu allais avoir 500 lignes.

Le fait que le bureau n'apparait pas n'est pas lié... J'ai souvent vu des discussions sur ce problème.

peux-tu donner le retour de

cat /etc/fstab

et de

sudo blkid

Après les avoir copiés, tu resélectionnes la copie et tu cliques sur le 11eme icône <> au dessus de cette ligne de saisie.
Je t'invites à modifier ton message précédant pour faire cette correction.

Dernière modification par Bougron (Le 02/12/2016, à 14:23)

EmW · Le 02/12/2016, à 21:07

# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
/dev/sda1       /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=4b985093-b0e6-48d4-8d46-db40fefa69eb none            swap    sw

et

/dev/sda1: UUID="ab25545a-0e09-41f9-872a-c36dc1a69c0f" TYPE="ext4" 
/dev/sda5: UUID="4b985093-b0e6-48d4-8d46-db40fefa69eb" TYPE="swap" 
/dev/sdb1: UUID="c2b42f0b-34d7-48fa-9f76-7f9cf21fc19b" TYPE="ext4" 
/dev/sdb5: UUID="8502156e-e698-4254-8789-281a6ce3c278" TYPE="swap"

Modération - Rappel : merci à l'avenir d'utiliser les balises code (explications ici).

Dernière modification par cqfd93 (Le 02/12/2016, à 21:41)

EmW · Le 02/12/2016, à 21:09

ça ce sont les résultats des deux commandes que tu me suggères.
Pour le reste, je vais relire ton message pour essayer de comprendre. Comme tu vois, je ne suis pas vraiment très au courant.
Merci en tous cas

Bougron · Le 02/12/2016, à 22:55

EmW a écrit :

........... mais tout est à l' arrêt, impossible à utiliser.

Je pense que tout est normal.... Mais je ne comprend pas ce que tu souhaites dire par cette phrase.

titi118 · Le 03/12/2016, à 00:06

EmW on ne comprend pas vraiment ton souci en fait. Attention, mon problème était un problème de boot (de démarrage) et non de lenteur de l'espace de travail.
Fais un message récapitulatif de tes soucis ici avec la description de ta machine (ordinateur portable / minitel / flipper...), son processeur (i3-i5-i7) et s'il n'y a que Linux dessus ou si tu partages ton disque dur avec windows par exemple (dual boot) ce serait déjà une bonne chose pour guider ceux qui passent par-là.

En passant Bougron, si cela ne te dérange pas, suite à ton déboggage, j'ai un problème qui persiste. Pourrais-tu jeter un coup d'oeil ici, juste au cas où tu aurais une idée du souci qui se cache derrière tout cela? Je te remercie par avance.

EmW · Le 04/12/2016, à 18:46

Merci pour tes conseils Titi 118, et désolé de squatter ta discussion. Mais tu écrivais : " Et il arrive de devoir attendre 5min pour que je puisse avoir accès à mes dossiers qui sont en "chargement" ".
C' est en lisant cette phrase que je me suis dit que ça ressemblait à mon problème.
Seulement il est vrai qu' il Il y a une différence maintenant que j' ai relu un peu plus attentivement ton message, c' est que chez moi tout s' affiche normalement au démarrage, pas de lenteur à ce niveau là. Seulement, alors que tous les icônes sont visibles sur l' écran, ils restent inutilisables pendant environ une minute. Alors qu' avant, tout était opérationnel directement. Mais je vais refaire un message comme tu me le suggères. Ailleurs tu crois?
Sinon, mon ordi n' est pas un portable, c' est un ordi de bureau normal HP, je ne l' utilise qu' avec Ubuntu depuis des années suite à des lenteurs infernales Windows. Je ne sais plus si j' ai évacué Windows par contre. Il dort peut-être encore dans les bas fonds de la bête. Je ne sais même pas comment le savoir en fait. L' informatique n' est pas mon fort...D' ailleurs j' ai beau lire et relire sur cette histoire de balises code, mais je ne comprends pas ce que je dois faire.

Dernière modification par EmW (Le 04/12/2016, à 19:17)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 23/11/2016, à 10:29

Lenteur Ubuntu démarrage

#2 Le 23/11/2016, à 15:09

Re : Lenteur Ubuntu démarrage

#3 Le 23/11/2016, à 15:15

Re : Lenteur Ubuntu démarrage

#4 Le 23/11/2016, à 15:44

Re : Lenteur Ubuntu démarrage

#5 Le 23/11/2016, à 21:18

Re : Lenteur Ubuntu démarrage

#6 Le 23/11/2016, à 22:33

Re : Lenteur Ubuntu démarrage

#7 Le 24/11/2016, à 00:57

Re : Lenteur Ubuntu démarrage

#8 Le 02/12/2016, à 11:30

Re : Lenteur Ubuntu démarrage

#9 Le 02/12/2016, à 11:43

Re : Lenteur Ubuntu démarrage

#10 Le 02/12/2016, à 14:02

Re : Lenteur Ubuntu démarrage

#11 Le 02/12/2016, à 14:07

Re : Lenteur Ubuntu démarrage

#12 Le 02/12/2016, à 14:22

Re : Lenteur Ubuntu démarrage

#13 Le 02/12/2016, à 21:07

Re : Lenteur Ubuntu démarrage

#14 Le 02/12/2016, à 21:09

Re : Lenteur Ubuntu démarrage

#15 Le 02/12/2016, à 22:55

Re : Lenteur Ubuntu démarrage

#16 Le 03/12/2016, à 00:06

Re : Lenteur Ubuntu démarrage

#17 Le 04/12/2016, à 18:46

Re : Lenteur Ubuntu démarrage

Pied de page des forums