Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 16/12/2016, à 18:48

Chtinux

[Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

Bonsoir à tous,
tout est presque dans le titre : je viens d'acquérir l'ordi susdit et j'ai un DVD d'Ubuntu obtenu avec la revue "Linux identity collection N°33".
J'ai regardé le fil sur le tuto et j'ai effectué les modifs dans le BIOS comme indiqué mais ça ne suffit pas. Le DVD démarre et me propose le menu d'Ubuntu mais que j'effectue l'opération "essayer" ou "installer" le même phénomène se produit : il y a 5 petits points qui s'affichent successivement sans autre indication ; cette opération se répète plusieurs fois puis ça se bloque à l'activation du 4ème point et tout s'arrête, y compris le lecteur de disque. A tout hasard j'ai fait vérifier le disque comme le propose le menu d'Ubuntu et tout est OK...alors voilà, j'ai besoin d'aide...
Merci d'avance
A+

Dernière modification par Chtinux (Le 26/12/2016, à 19:09)


J'attends beaucoup, j'espère peu, je ne demande rien.

Hors ligne

#2 Le 16/12/2016, à 18:53

malbo

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

Pour le lecteur qui passe, Chtinux fait référence à ce tuto : https://forum.ubuntu-fr.org/viewtopic.php?id=1976971
Son modèle MSI GP62 6QE-806XFR Leopard Pro est visible sur cette page : http://www.ldlc.com/fiche/PB00206110.html
processeur : Intel Core i5-6300HQ
carte graphique dédiée : NVIDIA GeForce GTX 950M

EDIT : une discussion lancée par lionncle sur le même modèle que le tien : https://forum.ubuntu-fr.org/viewtopic.php?id=1989606
Il utilisais Xubuntu mais je ne pense vraiment pas que Xubuntu soit plus approprié que Ubuntu pour ce modèle.

Dernière modification par malbo (Le 16/12/2016, à 19:11)

Hors ligne

#3 Le 19/12/2016, à 14:33

Chtinux

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

bon, je suis retourné voir là où j'avais aquaté ce PC (Gros bill) et ils ont été très serviables : ils m'ont installé Windaube donc pour eux le PC est bon mais ils sont incapables de m'aider pour installer Ubuntu...alors que faire ?
A+


J'attends beaucoup, j'espère peu, je ne demande rien.

Hors ligne

#4 Le 20/12/2016, à 10:57

Chtinux

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

Bonjour,
j'ai téléchargé la version 16.04.1 et j'ai gravé un DVD mais l'installation est toujours en rade...je vous mets les quelques messages qui apparaissent :
[0.207185] ACPI : EC : Fail in evaluating the _REG object or EC device. Broken bios is suspected
[6.573544] nouveau 0000:01:00.0 : priv HUBO : 10ecco ffffffff (1940822c)
[44.110946] NMI watchdog: BUG: soft lockup CPU#1 stuck for 23s! [plymouthd:1059]

et ce même message se répète, seule l'en-tête chiffrée change :
[72.109947]
[100.108949]
[128.107951]
[156.106953]
[184.105955}
jusqu'à
[366.627450] INFO: rcu_sched self-detected stall on CPU
[366.627471] $1 -...: (14999 ticks this GP) idle=997/1400000001/0 softirq=1334/1334 fqs=14997
et ça recommence...
Inutile de vous dire que j'y comprends que pouic roll


J'attends beaucoup, j'espère peu, je ne demande rien.

Hors ligne

#5 Le 20/12/2016, à 11:12

malbo

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

Au démarrage de l'ordi sur le LiveDVD, est-ce que tu est en mode EFI ou en mode classique (non-EFI) ? Pour le savoir, tu peux consulter ce paragraphe 2.5 Identifier si l'ordinateur démarre sur le CD (ou la live USB) en mode EFI

Dernière modification par malbo (Le 20/12/2016, à 11:25)

Hors ligne

#6 Le 20/12/2016, à 19:04

Chtinux

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

Bonsoir malbo,
je vois le second écran avec les deux icones en bas au centre...


J'attends beaucoup, j'espère peu, je ne demande rien.

Hors ligne

#7 Le 21/12/2016, à 06:35

malbo

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

Alors je te propose d'essayer de démarrer avec le paramètre de noyau nomodeset suivant les explications de ce post : https://forum.ubuntu-fr.org/viewtopic.p … 1#p8087381

Hors ligne

#8 Le 22/12/2016, à 12:08

Chtinux

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

Bonjour malbo,
s'cuse, hier je n'ai pas eu le temps de regarder, j'avais ma petite fille en garde cool...bon, je viens de suivre les instructions : c'est magique, ça fonctionne, wink...pour installer, il faut faire quoi maintenant ?
En tout cas merci de ton aide précieuse.
A+


J'attends beaucoup, j'espère peu, je ne demande rien.

Hors ligne

#9 Le 22/12/2016, à 12:41

malbo

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

Depuis la session live, assure-toi d'abord que tu as accès à internet. Pour cela, il suffit de lancer Firefox qui se trouve parmi les applications disponibles et tu peux alors vérifier que tu peux bien surfer sur la toile. Est-ce que c'est bon ?

Dernière modification par malbo (Le 22/12/2016, à 12:41)

Hors ligne

#10 Le 22/12/2016, à 18:24

Chtinux

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

Bonsoir,
non, ce n'est pas bon : le wifi n'est pas détecté...


J'attends beaucoup, j'espère peu, je ne demande rien.

Hors ligne

#11 Le 22/12/2016, à 18:50

malbo

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

Il faut te connecter en filaire (connecteur Ethernet). Tu devras faire l'installation en étant connecté en filaire. C'est seulement après l'installation que tu t'occuperas de faire fonctionner la WiFi.

Hors ligne

#12 Le 22/12/2016, à 19:03

Chtinux

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

bon, ça y est, finalement je me suis connecté en filaire RJ 45 et ça marche


J'attends beaucoup, j'espère peu, je ne demande rien.

Hors ligne

#13 Le 22/12/2016, à 20:44

malbo

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

Pour réaliser une sorte d'état des lieux avant travaux, je te prie de faire un Boot-Info depuis une session live et de donner l'URL de ce Boot-Info dans ta réponse.

Hors ligne

#14 Le 23/12/2016, à 11:20

Chtinux

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

Bonjour,
j'ai installé et je suis connecté en wifi ; voici le résultat du boot info  :

 Boot Info Script cfd9efe + Boot-Repair extra info      [Boot-Info 26Apr2016]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048 1,937,000,447 1,936,998,400  83 Linux
/dev/sda2       1,937,002,494 1,953,523,711    16,521,218   5 Extended
/dev/sda5       1,937,002,496 1,953,523,711    16,521,216  82 Linux swap / Solaris


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        189c66c9-ec55-4492-9ac4-a09a3926d2c6   ext4       
/dev/sda5        9c1bc289-339d-4300-99b7-b7d1ae6ac7d3   swap       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Dec 23  2016 ata-HL-DT-ST_DVDRAM_GUD0N_KZEGA7B2058 -> ../../sr0
lrwxrwxrwx 1 root root  9 Dec 23 10:59 ata-WDC_WD10JPVX-22JC3T0_WD-WX31A964CYVU -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 23 10:59 ata-WDC_WD10JPVX-22JC3T0_WD-WX31A964CYVU-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 23 10:59 ata-WDC_WD10JPVX-22JC3T0_WD-WX31A964CYVU-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 23 10:59 ata-WDC_WD10JPVX-22JC3T0_WD-WX31A964CYVU-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 Dec 23  2016 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root  9 Dec 23 10:59 wwn-0x50014ee60702676f -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 23 10:59 wwn-0x50014ee60702676f-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 23 10:59 wwn-0x50014ee60702676f-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 23 10:59 wwn-0x50014ee60702676f-part5 -> ../../sda5

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  189c66c9-ec55-4492-9ac4-a09a3926d2c6
else
  search --no-floppy --fs-uuid --set=root 189c66c9-ec55-4492-9ac4-a09a3926d2c6
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=0
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 0 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-189c66c9-ec55-4492-9ac4-a09a3926d2c6' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  189c66c9-ec55-4492-9ac4-a09a3926d2c6
	else
	  search --no-floppy --fs-uuid --set=root 189c66c9-ec55-4492-9ac4-a09a3926d2c6
	fi
	linux	/boot/vmlinuz-4.4.0-31-generic root=UUID=189c66c9-ec55-4492-9ac4-a09a3926d2c6 ro nomodeset quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.4.0-31-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-189c66c9-ec55-4492-9ac4-a09a3926d2c6' {
	menuentry 'Ubuntu, avec Linux 4.4.0-31-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-advanced-189c66c9-ec55-4492-9ac4-a09a3926d2c6' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  189c66c9-ec55-4492-9ac4-a09a3926d2c6
		else
		  search --no-floppy --fs-uuid --set=root 189c66c9-ec55-4492-9ac4-a09a3926d2c6
		fi
		echo	'Chargement de Linux 4.4.0-31-generic…'
		linux	/boot/vmlinuz-4.4.0-31-generic root=UUID=189c66c9-ec55-4492-9ac4-a09a3926d2c6 ro nomodeset quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-31-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-31-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-init-upstart-189c66c9-ec55-4492-9ac4-a09a3926d2c6' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  189c66c9-ec55-4492-9ac4-a09a3926d2c6
		else
		  search --no-floppy --fs-uuid --set=root 189c66c9-ec55-4492-9ac4-a09a3926d2c6
		fi
		echo	'Chargement de Linux 4.4.0-31-generic…'
		linux	/boot/vmlinuz-4.4.0-31-generic root=UUID=189c66c9-ec55-4492-9ac4-a09a3926d2c6 ro nomodeset quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-31-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-31-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-recovery-189c66c9-ec55-4492-9ac4-a09a3926d2c6' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  189c66c9-ec55-4492-9ac4-a09a3926d2c6
		else
		  search --no-floppy --fs-uuid --set=root 189c66c9-ec55-4492-9ac4-a09a3926d2c6
		fi
		echo	'Chargement de Linux 4.4.0-31-generic…'
		linux	/boot/vmlinuz-4.4.0-31-generic root=UUID=189c66c9-ec55-4492-9ac4-a09a3926d2c6 ro recovery nomodeset nomodeset
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-31-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  189c66c9-ec55-4492-9ac4-a09a3926d2c6
	else
	  search --no-floppy --fs-uuid --set=root 189c66c9-ec55-4492-9ac4-a09a3926d2c6
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  189c66c9-ec55-4492-9ac4-a09a3926d2c6
	else
	  search --no-floppy --fs-uuid --set=root 189c66c9-ec55-4492-9ac4-a09a3926d2c6
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=189c66c9-ec55-4492-9ac4-a09a3926d2c6 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=9c1bc289-339d-4300-99b7-b7d1ae6ac7d3 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 780.136474609 = 837.665161216  boot/grub/grub.cfg                             1
 696.235660553 = 747.577348096  boot/grub/i386-pc/core.img                     1
   1.077850342 = 1.157332992    boot/vmlinuz-4.4.0-31-generic                  1
   1.077850342 = 1.157332992    vmlinuz                                        1
 696.385986328 = 747.738759168  boot/initrd.img-4.4.0-31-generic               2
 696.385986328 = 747.738759168  initrd.img                                     2

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sda2

00000000  46 9b ad 15 a9 51 95 a9  de b9 66 a9 b7 9a 3b 11  |F....Q....f...;.|
00000010  38 8d 7b f6 df c4 58 f3  30 ed bd b0 57 fc 72 f1  |8.{...X.0...W.r.|
00000020  1e ab c9 ea 52 1b f2 5a  5b 8d f3 6f d7 e3 1d 9b  |....R..Z[..o....|
00000030  06 c9 86 2e 95 0d 4e 19  66 86 33 37 b3 e4 e0 79  |......N.f.37...y|
00000040  ce 72 fe af 78 fe e7 40  57 e9 3d f3 b7 2c d3 5f  |.r..x..@W.=..,._|
00000050  ca e1 4e a5 b8 5c 66 21  95 8b 1d 41 da e4 f6 14  |..N..\f!...A....|
00000060  f8 78 ad 10 dd 1c e8 f8  ae 68 a1 c7 27 71 c5 ad  |.x.......h..'q..|
00000070  50 a0 56 ea 13 da 84 1a  87 ce 21 e7 01 d5 b8 f3  |P.V.......!.....|
00000080  7c 62 b1 2a 48 fe 30 af  63 98 f6 65 9c dc b6 50  ||b.*H.0.c..e...P|
00000090  f0 d5 dd 8e 7c e9 c6 5c  6a 35 3a 9e ca 35 dd a3  |....|..\j5:..5..|
000000a0  6a 13 d4 60 eb 17 16 23  d3 b2 3b c5 91 81 95 28  |j..`...#..;....(|
000000b0  c7 f5 99 66 df bb 33 ed  90 4f 84 c5 db 35 34 cd  |...f..3..O...54.|
000000c0  25 93 b6 0d 78 ce 3d 6a  c4 c9 b0 13 0f b9 db a1  |%...x.=j........|
000000d0  0c 1a 99 97 4c 03 2e 5a  13 ae e1 54 ce 11 d1 f2  |....L..Z...T....|
000000e0  86 05 59 2f bb 23 7a 7d  fb 21 fa 47 6e 11 63 17  |..Y/.#z}.!.Gn.c.|
000000f0  de 17 7d ad 26 89 9d ed  9b 90 fd 54 77 aa e5 55  |..}.&......Tw..U|
00000100  87 77 9b 5c e7 01 ce 4e  0c be 7f b7 ad 05 e9 f1  |.w.\...N........|
00000110  4b 58 f5 fb 23 6a 4d 79  ae d6 c0 dc 94 24 85 95  |KX..#jMy.....$..|
00000120  5e bb f6 10 e0 75 ae 07  2f 15 bb 5c a7 88 a1 a3  |^....u../..\....|
00000130  2a 2a bc 81 b5 88 7d ba  e1 75 0b 01 5e 06 f8 4d  |**....}..u..^..M|
00000140  c7 d2 69 78 9f cd e6 05  5a 57 ab 24 81 b9 8e d8  |..ix....ZW.$....|
00000150  2c 69 d9 a4 4b c2 ba 6b  3c b9 27 4c a7 d5 7b 25  |,i..K..k<.'L..{%|
00000160  fb 38 fa b1 f5 87 68 79  f6 be a7 e1 d7 ae 05 d2  |.8....hy........|
00000170  66 de 00 3e e3 32 9a ef  cf 2e ca 7a ed cb 49 a7  |f..>.2.....z..I.|
00000180  a6 ca 3d e5 8e f0 b5 1a  1b 29 e3 d9 42 42 5d 5c  |..=......)..BB]\|
00000190  f3 e0 27 01 7c ba 70 57  90 00 66 01 96 38 46 cd  |..'.|.pW..f..8F.|
000001a0  c5 91 d7 49 22 69 7c 6f  b1 34 3f 59 1c 89 f2 a7  |...I"i|o.4?Y....|
000001b0  2b be 83 e9 f4 63 4b 9e  62 5c 8f 39 d7 5f 00 fe  |+....cK.b\.9._..|
000001c0  ff ff 82 fe ff ff 02 00  00 00 00 18 fc 00 00 00  |................|
000001d0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200



ADDITIONAL INFORMATION :
=================== log of boot-info 2016-12-23__10h59 ===================
boot-info version : 4ppa40
boot-sav version : 4ppa40
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa40
boot-info is executed in installed-session (Ubuntu 16.04.1 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.4.0-31-generic root=UUID=189c66c9-ec55-4492-9ac4-a09a3926d2c6 ro nomodeset quiet splash vt.handoff=7
Partition 2 does not start on physical sector boundary.

=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 16.04.1 LTS CurrentSession:linux

=================== blkid:
/dev/sda1: UUID="189c66c9-ec55-4492-9ac4-a09a3926d2c6" TYPE="ext4" PARTUUID="ad3aea5f-01"
/dev/sda5: UUID="9c1bc289-339d-4300-99b7-b7d1ae6ac7d3" TYPE="swap" PARTUUID="ad3aea5f-05"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

Partition 2 does not start on physical sector boundary.
Partition 2 does not start on physical sector boundary.

=================== /etc/grub.d/ :
drwxr-xr-x  2 root root    4096 juil. 19 22:50 grub.d
total 76
-rwxr-xr-x 1 root root  9791 juin  17  2016 00_header
-rwxr-xr-x 1 root root  6258 mars  15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12261 juin  17  2016 10_linux
-rwxr-xr-x 1 root root 11082 juin  17  2016 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 juin  17  2016 30_os-prober
-rwxr-xr-x 1 root root  1418 juin  17  2016 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juin  17  2016 40_custom
-rwxr-xr-x 1 root root   216 juin  17  2016 41_custom
-rw-r--r-- 1 root root   483 juin  17  2016 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX="nomodeset"

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA WDC WD10JPVX-22J (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Disk Flags:

Number  Start   End     Size    Type      File system     Flags
1      1049kB  992GB   992GB   primary   ext4            boot
2      992GB   1000GB  8459MB  extended
5      992GB   1000GB  8459MB  logical   linux-swap(v1)

=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:4096:msdos:ATA WDC WD10JPVX-22J:;
1:1049kB:992GB:992GB:ext4::boot;
2:992GB:1000GB:8459MB:::;
5:992GB:1000GB:8459MB:linux-swap(v1)::;

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sda   disk        931,5G
sda1  part ext4   923,6G
sda2  part            1K
sda5  part swap     7,9G
sr0   rom          1024M

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /
sda2     1  0  0
sda5     1  0  0         [SWAP]
sr0      1  0  1 running


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=4005408k,nr_inodes=1001352,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=804940k,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=33,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=804940k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hpet hugepages hwrng initctl input kmsg lightnvm log mapper mcelog mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper:  control
ls: impossible d'accéder à '': Aucun fichier ou dossier de ce type
Partition 2 does not start on physical sector boundary.

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.9G     0  3.9G   0% /dev
tmpfs          tmpfs     787M   50M  737M   7% /run
/dev/sda1      ext4      910G  3.8G  860G   1% /
tmpfs          tmpfs     3.9G  232K  3.9G   1% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     3.9G     0  3.9G   0% /sys/fs/cgroup
tmpfs          tmpfs     787M   68K  787M   1% /run/user/1000

=================== fdisk -l:
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes




Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0xad3aea5f

Device     Boot      Start        End    Sectors   Size Id Type
/dev/sda1  *          2048 1937000447 1936998400 923.6G 83 Linux
/dev/sda2       1937002494 1953523711   16521218   7.9G  5 Extended
/dev/sda5       1937002496 1953523711   16521216   7.9G 82 Linux swap / Solaris




=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to) and reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s


=================== Final advice in case of suggested repair


Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 16.04.1 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. ([url]http://doc.ubuntu-fr.org/tutoriel/partition_boot[/url])


=================== User settings
The settings chosen by the user will not act on the boot.

Modération : merci à l'avenir d'utiliser les balises code (explications ici).

Dernière modification par cqfd93 (Le 23/12/2016, à 17:12)


J'attends beaucoup, j'espère peu, je ne demande rien.

Hors ligne

#15 Le 23/12/2016, à 11:41

malbo

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

Je n'avais pas pensé que tu aurais déjà réalisé l'installation. L'installation semble parfaite mais il y a quelque chose qui ne va pas et qui se voit dans cet extrait :

=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX="nomodeset"

C'est la dernière ligne qui ne va pas : on voit que le paramètre de noyau nomodeset est appliqué automatiquement au démarrage. La ligne suivante extraite également du Boot-Info montre que la session a bien été démarrée avec cette option nomodeset puisqu'elle apparaît juste avant "quiet splash" :

BOOT_IMAGE=/boot/vmlinuz-4.4.0-31-generic root=UUID=189c66c9-ec55-4492-9ac4-a09a3926d2c6 ro nomodeset quiet splash vt.handoff=7

Le bon côté c'est que ça te permet de démarrer facilement, ça c'est vrai. Mais le mauvais côté c'est que ton affichage est peu performant parce que ce paramètre nomodeset bride justement les perfos graphiques. Je te suggère de retirer nomodeset afin que la ligne concernée devienne :

GRUB_CMDLINE_LINUX=""

Puis de passer la commande de mise à jour de Grub pour qu'elle soit effective au démarrage :

sudo update-grub

Après cela, tu seras obligé de faire la chose à chaque démarrage (c'est à dire ajouter à la main le paramètre de noyau comme j'explique ) mais il te sera possible d'installer le pilote graphique qui va bien(*) et ensuite plus besoin de manip à faire au démarrage pour ajouter nomodeset ou quoi que ce soit. Alors que là, tu ne peux pas le faire.

(*) je pense que tu pourras le faire en utilisant la méthode graphique

Dernière modification par malbo (Le 23/12/2016, à 12:04)

Hors ligne

#16 Le 23/12/2016, à 19:19

Chtinux

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

j'ai fait des modifs comme indiqué mais c'est pire que mieux : j'ai le même genre de messages qu'avant du genre :
NMI watchdog: bug : soft lockup - CPU#0 stuck for 22s! [plymouthd:2017]
et je ne sais pas vraiment quoi faire...


J'attends beaucoup, j'espère peu, je ne demande rien.

Hors ligne

#17 Le 23/12/2016, à 19:28

Chtinux

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

bon, j'ai relancé le système en mode "recovery" et actualisé grub et ça fonctionne...


J'attends beaucoup, j'espère peu, je ne demande rien.

Hors ligne

#18 Le 24/12/2016, à 07:17

malbo

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

Je te prie de refaire un Boot-Info depuis une session de ton Ubuntu installé et de donner l'URL de ce Boot-Info dans ta réponse afin que je puisse voir le résultat.

Hors ligne

#19 Le 24/12/2016, à 12:52

Chtinux

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

j'ai cru -naïvement ! - hier soir avoir résolu tous les problèmes mais non...ce matin en démarrant il m'a fallu recommencer le démarrage en "recovery" , bon, voici le boot-info :

 Boot Info Script cfd9efe + Boot-Repair extra info      [Boot-Info 26Apr2016]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.1 LTS
    Boot files:        /boot/grub/menu.lst /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048 1,937,000,447 1,936,998,400  83 Linux
/dev/sda2       1,937,002,494 1,953,523,711    16,521,218   5 Extended
/dev/sda5       1,937,002,496 1,953,523,711    16,521,216  82 Linux swap / Solaris


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        189c66c9-ec55-4492-9ac4-a09a3926d2c6   ext4       
/dev/sda5        9c1bc289-339d-4300-99b7-b7d1ae6ac7d3   swap       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Dec 24 12:25 ata-HL-DT-ST_DVDRAM_GUD0N_KZEGA7B2058 -> ../../sr0
lrwxrwxrwx 1 root root  9 Dec 24 12:45 ata-WDC_WD10JPVX-22JC3T0_WD-WX31A964CYVU -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 24 12:45 ata-WDC_WD10JPVX-22JC3T0_WD-WX31A964CYVU-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 24 12:45 ata-WDC_WD10JPVX-22JC3T0_WD-WX31A964CYVU-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 24 12:45 ata-WDC_WD10JPVX-22JC3T0_WD-WX31A964CYVU-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 Dec 24 12:25 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root  9 Dec 24 12:45 wwn-0x50014ee60702676f -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 24 12:45 wwn-0x50014ee60702676f-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 24 12:45 wwn-0x50014ee60702676f-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 24 12:45 wwn-0x50014ee60702676f-part5 -> ../../sda5

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)


=========================== sda1/boot/grub/menu.lst: ===========================

--------------------------------------------------------------------------------
# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-legacy-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default		0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout		3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title		Windows 95/98/NT/2000
# root		(hd0,0)
# makeactive
# chainloader	+1
#
# title		Linux
# root		(hd0,1)
# kernel	/vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=189c66c9-ec55-4492-9ac4-a09a3926d2c6 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=189c66c9-ec55-4492-9ac4-a09a3926d2c6

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title		Ubuntu 16.04.1 LTS, kernel 4.4.0-57-generic
uuid		189c66c9-ec55-4492-9ac4-a09a3926d2c6
kernel		/boot/vmlinuz-4.4.0-57-generic root=UUID=189c66c9-ec55-4492-9ac4-a09a3926d2c6 ro quiet splash 
initrd		/boot/initrd.img-4.4.0-57-generic

title		Ubuntu 16.04.1 LTS, kernel 4.4.0-57-generic (recovery mode)
uuid		189c66c9-ec55-4492-9ac4-a09a3926d2c6
kernel		/boot/vmlinuz-4.4.0-57-generic root=UUID=189c66c9-ec55-4492-9ac4-a09a3926d2c6 ro  single
initrd		/boot/initrd.img-4.4.0-57-generic

title		Ubuntu 16.04.1 LTS, kernel 4.4.0-31-generic
uuid		189c66c9-ec55-4492-9ac4-a09a3926d2c6
kernel		/boot/vmlinuz-4.4.0-31-generic root=UUID=189c66c9-ec55-4492-9ac4-a09a3926d2c6 ro quiet splash 
initrd		/boot/initrd.img-4.4.0-31-generic

title		Ubuntu 16.04.1 LTS, kernel 4.4.0-31-generic (recovery mode)
uuid		189c66c9-ec55-4492-9ac4-a09a3926d2c6
kernel		/boot/vmlinuz-4.4.0-31-generic root=UUID=189c66c9-ec55-4492-9ac4-a09a3926d2c6 ro  single
initrd		/boot/initrd.img-4.4.0-31-generic

title		Ubuntu 16.04.1 LTS, memtest86+
uuid		189c66c9-ec55-4492-9ac4-a09a3926d2c6
kernel		/boot/memtest86+.bin

### END DEBIAN AUTOMAGIC KERNELS LIST
--------------------------------------------------------------------------------

=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  189c66c9-ec55-4492-9ac4-a09a3926d2c6
else
  search --no-floppy --fs-uuid --set=root 189c66c9-ec55-4492-9ac4-a09a3926d2c6
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=C
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-189c66c9-ec55-4492-9ac4-a09a3926d2c6' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  189c66c9-ec55-4492-9ac4-a09a3926d2c6
	else
	  search --no-floppy --fs-uuid --set=root 189c66c9-ec55-4492-9ac4-a09a3926d2c6
	fi
	linux	/boot/vmlinuz-4.4.0-57-generic root=UUID=189c66c9-ec55-4492-9ac4-a09a3926d2c6 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.4.0-57-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-189c66c9-ec55-4492-9ac4-a09a3926d2c6' {
	menuentry 'Ubuntu, with Linux 4.4.0-57-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-57-generic-advanced-189c66c9-ec55-4492-9ac4-a09a3926d2c6' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  189c66c9-ec55-4492-9ac4-a09a3926d2c6
		else
		  search --no-floppy --fs-uuid --set=root 189c66c9-ec55-4492-9ac4-a09a3926d2c6
		fi
		echo	'Loading Linux 4.4.0-57-generic ...'
		linux	/boot/vmlinuz-4.4.0-57-generic root=UUID=189c66c9-ec55-4492-9ac4-a09a3926d2c6 ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-57-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-57-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-57-generic-init-upstart-189c66c9-ec55-4492-9ac4-a09a3926d2c6' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  189c66c9-ec55-4492-9ac4-a09a3926d2c6
		else
		  search --no-floppy --fs-uuid --set=root 189c66c9-ec55-4492-9ac4-a09a3926d2c6
		fi
		echo	'Loading Linux 4.4.0-57-generic ...'
		linux	/boot/vmlinuz-4.4.0-57-generic root=UUID=189c66c9-ec55-4492-9ac4-a09a3926d2c6 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-57-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-57-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-57-generic-recovery-189c66c9-ec55-4492-9ac4-a09a3926d2c6' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  189c66c9-ec55-4492-9ac4-a09a3926d2c6
		else
		  search --no-floppy --fs-uuid --set=root 189c66c9-ec55-4492-9ac4-a09a3926d2c6
		fi
		echo	'Loading Linux 4.4.0-57-generic ...'
		linux	/boot/vmlinuz-4.4.0-57-generic root=UUID=189c66c9-ec55-4492-9ac4-a09a3926d2c6 ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-57-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-31-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-advanced-189c66c9-ec55-4492-9ac4-a09a3926d2c6' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  189c66c9-ec55-4492-9ac4-a09a3926d2c6
		else
		  search --no-floppy --fs-uuid --set=root 189c66c9-ec55-4492-9ac4-a09a3926d2c6
		fi
		echo	'Loading Linux 4.4.0-31-generic ...'
		linux	/boot/vmlinuz-4.4.0-31-generic root=UUID=189c66c9-ec55-4492-9ac4-a09a3926d2c6 ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-31-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-31-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-init-upstart-189c66c9-ec55-4492-9ac4-a09a3926d2c6' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  189c66c9-ec55-4492-9ac4-a09a3926d2c6
		else
		  search --no-floppy --fs-uuid --set=root 189c66c9-ec55-4492-9ac4-a09a3926d2c6
		fi
		echo	'Loading Linux 4.4.0-31-generic ...'
		linux	/boot/vmlinuz-4.4.0-31-generic root=UUID=189c66c9-ec55-4492-9ac4-a09a3926d2c6 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-31-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-31-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-recovery-189c66c9-ec55-4492-9ac4-a09a3926d2c6' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  189c66c9-ec55-4492-9ac4-a09a3926d2c6
		else
		  search --no-floppy --fs-uuid --set=root 189c66c9-ec55-4492-9ac4-a09a3926d2c6
		fi
		echo	'Loading Linux 4.4.0-31-generic ...'
		linux	/boot/vmlinuz-4.4.0-31-generic root=UUID=189c66c9-ec55-4492-9ac4-a09a3926d2c6 ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-31-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=189c66c9-ec55-4492-9ac4-a09a3926d2c6 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=9c1bc289-339d-4300-99b7-b7d1ae6ac7d3 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 740.133838654 = 794.712657920  boot/grub/menu.lst                             2
   8.180789948 = 8.784056320    boot/grub/grub.cfg                             1
 696.261283875 = 747.604860928  boot/grub/i386-pc/core.img                     1
   1.077850342 = 1.157332992    boot/vmlinuz-4.4.0-31-generic                  1
   1.671714783 = 1.794990080    boot/vmlinuz-4.4.0-57-generic                  1
   1.671714783 = 1.794990080    vmlinuz                                        1
   1.077850342 = 1.157332992    vmlinuz.old                                    1
   2.965137482 = 3.183792128    boot/initrd.img-4.4.0-31-generic               3
   3.167018890 = 3.400560640    boot/initrd.img-4.4.0-57-generic               3
   3.167018890 = 3.400560640    initrd.img                                     3
   2.965137482 = 3.183792128    initrd.img.old                                 3

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sda2

00000000  46 9b ad 15 a9 51 95 a9  de b9 66 a9 b7 9a 3b 11  |F....Q....f...;.|
00000010  38 8d 7b f6 df c4 58 f3  30 ed bd b0 57 fc 72 f1  |8.{...X.0...W.r.|
00000020  1e ab c9 ea 52 1b f2 5a  5b 8d f3 6f d7 e3 1d 9b  |....R..Z[..o....|
00000030  06 c9 86 2e 95 0d 4e 19  66 86 33 37 b3 e4 e0 79  |......N.f.37...y|
00000040  ce 72 fe af 78 fe e7 40  57 e9 3d f3 b7 2c d3 5f  |.r..x..@W.=..,._|
00000050  ca e1 4e a5 b8 5c 66 21  95 8b 1d 41 da e4 f6 14  |..N..\f!...A....|
00000060  f8 78 ad 10 dd 1c e8 f8  ae 68 a1 c7 27 71 c5 ad  |.x.......h..'q..|
00000070  50 a0 56 ea 13 da 84 1a  87 ce 21 e7 01 d5 b8 f3  |P.V.......!.....|
00000080  7c 62 b1 2a 48 fe 30 af  63 98 f6 65 9c dc b6 50  ||b.*H.0.c..e...P|
00000090  f0 d5 dd 8e 7c e9 c6 5c  6a 35 3a 9e ca 35 dd a3  |....|..\j5:..5..|
000000a0  6a 13 d4 60 eb 17 16 23  d3 b2 3b c5 91 81 95 28  |j..`...#..;....(|
000000b0  c7 f5 99 66 df bb 33 ed  90 4f 84 c5 db 35 34 cd  |...f..3..O...54.|
000000c0  25 93 b6 0d 78 ce 3d 6a  c4 c9 b0 13 0f b9 db a1  |%...x.=j........|
000000d0  0c 1a 99 97 4c 03 2e 5a  13 ae e1 54 ce 11 d1 f2  |....L..Z...T....|
000000e0  86 05 59 2f bb 23 7a 7d  fb 21 fa 47 6e 11 63 17  |..Y/.#z}.!.Gn.c.|
000000f0  de 17 7d ad 26 89 9d ed  9b 90 fd 54 77 aa e5 55  |..}.&......Tw..U|
00000100  87 77 9b 5c e7 01 ce 4e  0c be 7f b7 ad 05 e9 f1  |.w.\...N........|
00000110  4b 58 f5 fb 23 6a 4d 79  ae d6 c0 dc 94 24 85 95  |KX..#jMy.....$..|
00000120  5e bb f6 10 e0 75 ae 07  2f 15 bb 5c a7 88 a1 a3  |^....u../..\....|
00000130  2a 2a bc 81 b5 88 7d ba  e1 75 0b 01 5e 06 f8 4d  |**....}..u..^..M|
00000140  c7 d2 69 78 9f cd e6 05  5a 57 ab 24 81 b9 8e d8  |..ix....ZW.$....|
00000150  2c 69 d9 a4 4b c2 ba 6b  3c b9 27 4c a7 d5 7b 25  |,i..K..k<.'L..{%|
00000160  fb 38 fa b1 f5 87 68 79  f6 be a7 e1 d7 ae 05 d2  |.8....hy........|
00000170  66 de 00 3e e3 32 9a ef  cf 2e ca 7a ed cb 49 a7  |f..>.2.....z..I.|
00000180  a6 ca 3d e5 8e f0 b5 1a  1b 29 e3 d9 42 42 5d 5c  |..=......)..BB]\|
00000190  f3 e0 27 01 7c ba 70 57  90 00 66 01 96 38 46 cd  |..'.|.pW..f..8F.|
000001a0  c5 91 d7 49 22 69 7c 6f  b1 34 3f 59 1c 89 f2 a7  |...I"i|o.4?Y....|
000001b0  2b be 83 e9 f4 63 4b 9e  62 5c 8f 39 d7 5f 00 fe  |+....cK.b\.9._..|
000001c0  ff ff 82 fe ff ff 02 00  00 00 00 18 fc 00 00 00  |................|
000001d0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200



ADDITIONAL INFORMATION :
=================== log of boot-info 2016-12-24__12h45 ===================
boot-info version : 4ppa40
boot-sav version : 4ppa40
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa40
boot-info is executed in installed-session (Ubuntu 16.04.1 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.4.0-57-generic root=UUID=189c66c9-ec55-4492-9ac4-a09a3926d2c6 ro recovery nomodeset
Partition 2 does not start on physical sector boundary.

=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 16.04.1 LTS CurrentSession:linux

=================== blkid:
/dev/sda1: UUID="189c66c9-ec55-4492-9ac4-a09a3926d2c6" TYPE="ext4" PARTUUID="ad3aea5f-01"
/dev/sda5: UUID="9c1bc289-339d-4300-99b7-b7d1ae6ac7d3" TYPE="swap" PARTUUID="ad3aea5f-05"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

Partition 2 does not start on physical sector boundary.
Partition 2 does not start on physical sector boundary.

=================== /etc/grub.d/ :
drwxr-xr-x  2 root root    4096 déc.  23 13:21 grub.d
drwxr-xr-x  2 root root    4096 déc.  23 13:18 grub.d.bak
total 72
-rwxr-xr-x 1 root root  9791 juil. 23 02:09 00_header
-rwxr-xr-x 1 root root  6258 mars  15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12261 juil. 23 02:09 10_linux
-rwxr-xr-x 1 root root 11082 juil. 23 02:09 20_linux_xen
-rwxr-xr-x 1 root root 11692 juil. 23 02:09 30_os-prober
-rwxr-xr-x 1 root root  1418 juil. 23 02:09 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juil. 23 02:09 40_custom
-rwxr-xr-x 1 root root   216 juil. 23 02:09 41_custom
-rw-r--r-- 1 root root   483 juil. 23 02:09 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/grub/menu.lst detected

=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
EFI in dmesg.
[    0.000000] ACPI: UEFI 0x000000007760CED0 000042 (v01                 00000000      00000000)
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub1 grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA WDC WD10JPVX-22J (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Disk Flags:

Number  Start   End     Size    Type      File system     Flags
1      1049kB  992GB   992GB   primary   ext4            boot
2      992GB   1000GB  8459MB  extended
5      992GB   1000GB  8459MB  logical   linux-swap(v1)

=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:4096:msdos:ATA WDC WD10JPVX-22J:;
1:1049kB:992GB:992GB:ext4::boot;
2:992GB:1000GB:8459MB:::;
5:992GB:1000GB:8459MB:linux-swap(v1)::;

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sda   disk        931,5G
sda1  part ext4   923,6G
sda2  part            1K
sda5  part swap     7,9G
sr0   rom          1024M

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /
sda2     1  0  0
sda5     1  0  0         [SWAP]
sr0      1  0  1 running


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=4004508k,nr_inodes=1001127,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=804928k,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=22,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=804928k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dvd dvdrw ecryptfs fd full fuse hidraw0 hpet hugepages hwrng initctl input kmsg lightnvm log mapper mcelog mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper:  control
ls: impossible d'accéder à '': Aucun fichier ou dossier de ce type
Partition 2 does not start on physical sector boundary.

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.9G     0  3.9G   0% /dev
tmpfs          tmpfs     787M  9.5M  777M   2% /run
/dev/sda1      ext4      910G  4.6G  859G   1% /
tmpfs          tmpfs     3.9G  216K  3.9G   1% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     3.9G     0  3.9G   0% /sys/fs/cgroup
tmpfs          tmpfs     787M   60K  787M   1% /run/user/1000

=================== fdisk -l:
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes




Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0xad3aea5f

Device     Boot      Start        End    Sectors   Size Id Type
/dev/sda1  *          2048 1937000447 1936998400 923.6G 83 Linux
/dev/sda2       1937002494 1953523711   16521218   7.9G  5 Extended
/dev/sda5       1937002496 1953523711   16521216   7.9G 82 Linux swap / Solaris




=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to fix legacy files) and reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s


=================== Final advice in case of suggested repair


Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 16.04.1 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. ([url]http://doc.ubuntu-fr.org/tutoriel/partition_boot[/url])


=================== User settings
The settings chosen by the user will not act on the boot.


A+Merci


Modération : merci à l'avenir d'utiliser les balises code (explications ici).

Dernière modification par cqfd93 (Le 24/12/2016, à 16:49)


J'attends beaucoup, j'espère peu, je ne demande rien.

Hors ligne

#20 Le 24/12/2016, à 13:55

malbo

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

C'est correct.
Je t'ai dit dans le post #15 d'installer le pilote graphique par la méthode graphique. L'as-tu fait ? Si oui, décris ce que tu vois à présent dans l'onglet "Pilotes additionnels" ou si tu préfères tu peux prendre une photo et l’insérer dans ta réponse (voir ICI)

Hors ligne

#21 Le 24/12/2016, à 19:09

Chtinux

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

Bonsoir,
dans l'onglet "Pilotes additionnels" je vois :
NVIDIA Corporatuion : GM107M[GeForce GTX950M    et la mention :
Ce périphérique utilise un pilote alternatif     et la case suivante est cochée :
Utilisation de serveur XX.org- pilote d'affichage Nouveau depuis xserver-xorg-video-nouveau(libre)
et plus étrange :
Inconnu : Inconnu
Ce périphérique ne fonctionne pas
et la case "ne pas utiliser ce périphérique" est cochée
Voilà
Bon réveillon
A+


J'attends beaucoup, j'espère peu, je ne demande rien.

Hors ligne

#22 Le 25/12/2016, à 06:37

malbo

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

Chtinux a écrit :

Bonsoir,
dans l'onglet "Pilotes additionnels" je vois :
NVIDIA Corporatuion : GM107M[GeForce GTX950M    et la mention :
Ce périphérique utilise un pilote alternatif     et la case suivante est cochée :
Utilisation de serveur XX.org- pilote d'affichage Nouveau depuis xserver-xorg-video-nouveau(libre)

Au-dessus de cette ligne "Utilisation de serveur XX.org- pilote d'affichage Nouveau depuis xserver-xorg-video-nouveau(libre)", il devrait y avoir des choix possibles qui ne sont pas cochés. Je te prie de les noter dans ta réponse (copie bien exactement tout ce que tu vois)

Hors ligne

#23 Le 25/12/2016, à 11:11

Chtinux

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

vindious, tu réponds à 7h37, t'es un lève tôt tizote ...bon, sérieux, bin, non, je ne vois que ces 2 possibilités ; d'ailleurs hier, suite à ta remarque, j'ai installé NVIDIA et j'ai l'indication : "Ce périphérique utilise le pilote recommandé."


J'attends beaucoup, j'espère peu, je ne demande rien.

Hors ligne

#24 Le 25/12/2016, à 19:57

malbo

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

Je regrette d'être nul en problème graphique. Je te suggère de créer une nouvelle discussion dans la section spécialisée "Affichage et cartes graphiques". En effet, ce que tu as signalé dans le post #21 (la case suivante est cochée : Utilisation de serveur XX.org- pilote d'affichage Nouveau depuis xserver-xorg-video-nouveau(libre)) pour moi ça veut dire que tu utilises le pilote libre appelé "nouveau" et ça ne convient pas. Si tu crées cette nouvelle discussion, donne le lien vers la présente pour que ceux qui peuvent aider aient le max d'infos.

Hors ligne

#25 Le 26/12/2016, à 18:27

Chtinux

Re : [Résolu]Problème d'installation Ubuntu 16.04 sur MSI GP62 6QE-806XFR

Bonsoir malbo,
tout va bien, tout est résolu, la carte graphique fonctionne bien avec le pilote NVIDIA ; j'ai par ailleurs chargé "freecad" et là j'ai quelques soucis mais ça dépasse le cadre de ce post.
Encore merci pour ton aide
Bonne fin d'année.:cool:


J'attends beaucoup, j'espère peu, je ne demande rien.

Hors ligne