Ubuntu-fr

Petrusmok

[RÉSOLU] Redémarrage impossible aprés installation: No device found.

Bonjour,
Aprés installation ubuntu 16.04 64 bit avec un live usb sur un portable Dell 5500 récent; pas possible de redémarrer.
Message no device found.
Il y avait un windows 8 et le but était d'effacer et d'installer ubuntu intégralement sans dual boot.
L'installation s'est déroulé comme d'habitude mais je pense que j'ai trop bidouillé l'uefi sans m’être renseigné avant.
Pour que ma clé bootable démarre en premier, j'ai fait F12 puis désactivé l'uefi.
Par la suite, j'ai bricolé pas mal de trucs avec legacy, secure boot, etc...
J'ai mis une belle zone la dedans je crois. J'ai tenté de remettre tous les paramètres du bios par défaut mais rien n'y a fait.
Je cherche donc de l'aide.
Voici une copie du boot info depuis une session live sur l'ordi en question d'ou je parle en ce moment:

 Boot Info Script cfd9efe + Boot-Repair extra info      [Boot-Info 26Apr2016]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/Boot/bootx64.efi /EFI/ubuntu/MokManager.efi 
                       /EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi 
                       /EFI/ubuntu/shimx64.efi 
                       /EFI/Microsoft/Boot/bootmgfw.efi 
                       /EFI/Microsoft/Boot/bootx64.efi

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info:

Dernière modification par Petrusmok (Le 26/12/2016, à 11:09)

Petrusmok

Re : [RÉSOLU] Redémarrage impossible aprés installation: No device found.

Je remet ici le boot info complet:

 Boot Info Script cfd9efe + Boot-Repair extra info      [Boot-Info 26Apr2016]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/Boot/bootx64.efi /EFI/ubuntu/MokManager.efi 
                       /EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi 
                       /EFI/ubuntu/shimx64.efi 
                       /EFI/Microsoft/Boot/bootmgfw.efi 
                       /EFI/Microsoft/Boot/bootx64.efi

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 1,953,525,167 1,953,525,167  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sda1                 2,048     1,050,623     1,048,576 EFI System partition
/dev/sda2             1,050,624 1,936,928,767 1,935,878,144 Data partition (Linux)
/dev/sda3         1,936,928,768 1,953,523,711    16,594,944 Swap partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        42BC-EC21                              vfat       
/dev/sda2        69477376-4daf-4204-a8c8-8e8c49b80271   ext4       
/dev/sda3        8c447d50-14d3-4e0a-97a1-74099d18e447   swap       
/dev/sr0         2016-04-20-22-29-52-00                 iso9660    Ubuntu 16.04 LTS amd64

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Dec 24 09:05 ata-PLDS_DVD+_-RW_DU-8A5LH_YYCRW7363953R6691A02 -> ../../sr0
lrwxrwxrwx 1 root root  9 Dec 24 09:16 ata-TOSHIBA_MQ01ABD100_25HTTIP2T -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 24 09:16 ata-TOSHIBA_MQ01ABD100_25HTTIP2T-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 24 09:16 ata-TOSHIBA_MQ01ABD100_25HTTIP2T-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 24 09:16 ata-TOSHIBA_MQ01ABD100_25HTTIP2T-part3 -> ../../sda3
lrwxrwxrwx 1 root root  9 Dec 24 09:16 wwn-0x5000039611e071f6 -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 24 09:16 wwn-0x5000039611e071f6-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 24 09:16 wwn-0x5000039611e071f6-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 24 09:16 wwn-0x5000039611e071f6-part3 -> ../../sda3

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sr0         /cdrom                   iso9660    (ro,noatime)


=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  69477376-4daf-4204-a8c8-8e8c49b80271
else
  search --no-floppy --fs-uuid --set=root 69477376-4daf-4204-a8c8-8e8c49b80271
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=en_US
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=10
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-69477376-4daf-4204-a8c8-8e8c49b80271' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  69477376-4daf-4204-a8c8-8e8c49b80271
	else
	  search --no-floppy --fs-uuid --set=root 69477376-4daf-4204-a8c8-8e8c49b80271
	fi
	linux	/boot/vmlinuz-4.4.0-21-generic.efi.signed root=UUID=69477376-4daf-4204-a8c8-8e8c49b80271 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.4.0-21-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-69477376-4daf-4204-a8c8-8e8c49b80271' {
	menuentry 'Ubuntu, with Linux 4.4.0-21-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-advanced-69477376-4daf-4204-a8c8-8e8c49b80271' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  69477376-4daf-4204-a8c8-8e8c49b80271
		else
		  search --no-floppy --fs-uuid --set=root 69477376-4daf-4204-a8c8-8e8c49b80271
		fi
		echo	'Loading Linux 4.4.0-21-generic ...'
		linux	/boot/vmlinuz-4.4.0-21-generic.efi.signed root=UUID=69477376-4daf-4204-a8c8-8e8c49b80271 ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-21-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-21-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-init-upstart-69477376-4daf-4204-a8c8-8e8c49b80271' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  69477376-4daf-4204-a8c8-8e8c49b80271
		else
		  search --no-floppy --fs-uuid --set=root 69477376-4daf-4204-a8c8-8e8c49b80271
		fi
		echo	'Loading Linux 4.4.0-21-generic ...'
		linux	/boot/vmlinuz-4.4.0-21-generic.efi.signed root=UUID=69477376-4daf-4204-a8c8-8e8c49b80271 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-21-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-recovery-69477376-4daf-4204-a8c8-8e8c49b80271' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  69477376-4daf-4204-a8c8-8e8c49b80271
		else
		  search --no-floppy --fs-uuid --set=root 69477376-4daf-4204-a8c8-8e8c49b80271
		fi
		echo	'Loading Linux 4.4.0-21-generic ...'
		linux	/boot/vmlinuz-4.4.0-21-generic.efi.signed root=UUID=69477376-4daf-4204-a8c8-8e8c49b80271 ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.4.0-21-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/25_custom ###

menuentry "EFI/ubuntu/fwupx64.efi" {
search --fs-uuid --no-floppy --set=root 42BC-EC21
chainloader (${root})/EFI/ubuntu/fwupx64.efi
}

menuentry "EFI/ubuntu/MokManager.efi" {
search --fs-uuid --no-floppy --set=root 42BC-EC21
chainloader (${root})/EFI/ubuntu/MokManager.efi
}
### END /etc/grub.d/25_custom ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=69477376-4daf-4204-a8c8-8e8c49b80271 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
#UUID=42BC-EC21  /boot/efi       vfat    umask=0077      0       1
# swap was on /dev/sda3 during installation
UUID=8c447d50-14d3-4e0a-97a1-74099d18e447 none            swap    sw              0       0
UUID=42BC-EC21	/boot/efi	vfat	defaults	0	1
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 880.642093658 = 945.582247936  boot/grub/grub.cfg                             1
   1.570007324 = 1.685782528    boot/vmlinuz-4.4.0-21-generic                  1
 880.640193939 = 945.580208128  boot/vmlinuz-4.4.0-21-generic.efi.signed       1
   1.570007324 = 1.685782528    vmlinuz                                        1
 776.881450653 = 834.170105856  boot/initrd.img-4.4.0-21-generic               3
 776.881450653 = 834.170105856  initrd.img                                     3

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/5350/mounts) leaked on lvs invocation. Parent PID 13744: bash
File descriptor 63 (pipe:[54158]) leaked on lvs invocation. Parent PID 13744: bash

ADDITIONAL INFORMATION :
=================== log of boot-repair 2016-12-24__09h16 ===================
boot-repair version : 4ppa40
boot-sav version : 4ppa40
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa40
boot-repair is executed in live-session (Ubuntu 16.04 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
ls: cannot access '/home/usr/.config': No such file or directory

=================== os-prober:
/dev/sda2:Ubuntu 16.04 LTS (16.04):Ubuntu:linux

=================== blkid:
/dev/sda1: UUID="42BC-EC21" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="d22f631f-3a4d-4d5b-8be0-677c1d790153"
/dev/sda2: UUID="69477376-4daf-4204-a8c8-8e8c49b80271" TYPE="ext4" PARTUUID="0f9b79e9-49b7-4910-b939-48d053bd5582"
/dev/sr0: UUID="2016-04-20-22-29-52-00" LABEL="Ubuntu 16.04 LTS amd64" TYPE="iso9660" PTUUID="0e0e8e70" PTTYPE="dos"
/dev/loop0: TYPE="squashfs"
/dev/sda3: UUID="8c447d50-14d3-4e0a-97a1-74099d18e447" TYPE="swap" PARTUUID="c22667c5-488c-4f08-9c33-60bd82a15392"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


=================== sda2/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 Apr 20  2016 grub.d
total 76
-rwxr-xr-x 1 root root  9791 Apr 15  2016 00_header
-rwxr-xr-x 1 root root  6258 Mar 15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12261 Apr 15  2016 10_linux
-rwxr-xr-x 1 root root 11082 Apr 15  2016 20_linux_xen
-rwxr-xr-x 1 root root  1992 Jan 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 Apr 15  2016 30_os-prober
-rwxr-xr-x 1 root root  1418 Apr 15  2016 30_uefi-firmware
-rwxr-xr-x 1 root root   214 Apr 15  2016 40_custom
-rwxr-xr-x 1 root root   216 Apr 15  2016 41_custom
-rw-r--r-- 1 root root   483 Apr 15  2016 README




=================== sda2/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda2: UUID=42BC-EC21   (sda1)

=================== efibootmgr -v
BootCurrent: 0001
Timeout: 1 seconds
BootOrder: 0001
Boot0001* UEFI: PLDS DVD+/-RW DU-8A5LH	PciRoot(0x0)/Pci(0x1f,0x2)/Sata(1,65535,0)/CDROM(1,0xb0451,0x1280)..BO

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda1.
sda2	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda2.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA TOSHIBA MQ01ABD1 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Disk Flags:

Number  Start   End     Size    File system     Name                  Flags
1      1049kB  538MB   537MB   fat32           EFI System Partition  boot, esp
2      538MB   992GB   991GB   ext4
3      992GB   1000GB  8497MB  linux-swap(v1)


Model: PLDS DVD+-RW DU-8A5LH (scsi)
Disk /dev/sr0: 4700MB
Sector size (logical/physical): 2048B/2048B
Partition Table: mac
Disk Flags:

Number  Start   End     Size    File system  Name   Flags
1      2048B   6143B   4096B                Apple
2      1479MB  1481MB  2425kB               EFI

=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA TOSHIBA MQ01ABD1:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:992GB:991GB:ext4::;
3:992GB:1000GB:8497MB:linux-swap(v1)::;

BYT;
/dev/sr0:4700MB:scsi:2048:2048:mac:PLDS DVD+-RW DU-8A5LH:;
1:2048B:6143B:4096B::Apple:;
2:1479MB:1481MB:2425kB::EFI:;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
sda   disk          931.5G
sda1  part vfat       512M
sda2  part ext4     923.1G
sda3  part swap       7.9G
sr0   rom  iso9660    4.4G Ubuntu 16.04 LTS amd64
loop0 loop squashfs   1.3G

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /mnt/boot-sav/sda1
sda2     1  0  0         /mnt/boot-sav/sda2
sda3     1  0  0         [SWAP]
sr0      1  0  1 running /cdrom
loop0    1  1  0         /rofs


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=4027360k,nr_inodes=1006840,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=808404k,mode=755)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd,nsroot=/)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer,nsroot=/)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory,nsroot=/)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids,nsroot=/)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices,nsroot=/)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event,nsroot=/)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio,nsroot=/)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb,nsroot=/)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio,nsroot=/)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct,nsroot=/)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset,nsroot=/)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=28,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=808404k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw,relatime,data=ordered)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hpet hugepages hwrng i2c-0 i2c-1 i2c-10 i2c-11 i2c-12 i2c-13 i2c-14 i2c-15 i2c-16 i2c-17 i2c-18 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 08 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 10 00 fe 03 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 21 ec bc 42 4e  4f 20 4e 41 4d 45 20 20  |..)!..BNO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.9G     0  3.9G   0% /dev
tmpfs          tmpfs     790M  9.6M  780M   2% /run
/dev/sr0       iso9660   1.4G  1.4G     0 100% /cdrom
/dev/loop0     squashfs  1.4G  1.4G     0 100% /rofs
/cow           overlay   3.9G   93M  3.8G   3% /
tmpfs          tmpfs     3.9G  188K  3.9G   1% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     3.9G     0  3.9G   0% /sys/fs/cgroup
tmpfs          tmpfs     3.9G  256K  3.9G   1% /tmp
tmpfs          tmpfs     790M   72K  790M   1% /run/user/999
/dev/sda1      vfat      511M  3.6M  508M   1% /mnt/boot-sav/sda1
/dev/sda2      ext4      909G  3.4G  859G   1% /mnt/boot-sav/sda2

=================== fdisk -l:
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/loop0: 1.3 GiB, 1433468928 bytes, 2799744 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 35CBEE05-277E-4B66-8ADD-A9171D6FAD6E

Device          Start        End    Sectors   Size Type
/dev/sda1        2048    1050623    1048576   512M EFI System
/dev/sda2     1050624 1936928767 1935878144 923.1G Linux filesystem
/dev/sda3  1936928768 1953523711   16594944   7.9G Linux swap




=================== Default settings of Boot Repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    use-standard-efi-file rename-ms-efi


=================== User settings
The settings chosen by the user will reinstall the grub-efi-amd64-signed of sda2, using the following options:      disable-internet-check  sda1/boot/efi,
Additional repair will be performed: unhide-bootmenu-10s    use-standard-efi-file rename-ms-efi


/boot/efi added in sda2/fstab
Mount sda1 on /mnt/boot-sav/sda2/boot/efi
ls sda1/efi: /ubuntu/shimx64.efi /ubuntu/MokManager.efi /ubuntu/grubx64.efi /ubuntu/grub.cfg /ubuntu/fwupx64.efi /ubuntu/fw
Unhide GRUB boot menu in sda2/etc/default/grub

*******lspci -nnk | grep -iA3 vga
00:02.0 VGA compatible controller [0300]: Intel Corporation Broadwell-U Integrated Graphics [8086:1616] (rev 09)
DeviceName:  Onboard IGD
Subsystem: Dell Broadwell-U Integrated Graphics [1028:06ae]
Kernel driver in use: i915
*******

grub-install --version
grub-install (GRUB) 2.02~beta2-36ubuntu3,grub-install (GRUB) 2.

chroot /mnt/boot-sav/sda2 efibootmgr -v
BootCurrent: 0001
Timeout: 1 seconds
BootOrder: 0001
Boot0001* UEFI: PLDS DVD+/-RW DU-8A5LH	PciRoot(0x0)/Pci(0x1f,0x2)/Sata(1,65535,0)/CDROM(1,0xb0451,0x1280)..BO

chroot /mnt/boot-sav/sda2 uname -r
Kernel: 4.4.0-21-generic

Reinstall the grub-efi-amd64-signed of sda2
Installing for x86_64-efi platform.
Installation finished. No error reported.
grub-install --efi-directory=/boot/efi --target=x86_64-efi --uefi-secure-boot : exit code of grub-install :0
ls sda1/efi: /ubuntu/shimx64.efi /ubuntu/MokManager.efi /ubuntu/grubx64.efi /ubuntu/grub.cfg /ubuntu/fwupx64.efi /ubuntu/fw
df /dev/sda1
cp /mnt/boot-sav/sda2/boot/efi/EFI/ubuntu/shimx64.efi /mnt/boot-sav/sda2/boot/efi/EFI/Microsoft/Boot/bootmgfw.efi (& .grb)
df /dev/sda1
cp /mnt/boot-sav/sda2/boot/efi/EFI/ubuntu/shimx64.efi /mnt/boot-sav/sda2/boot/efi/EFI/Microsoft/Boot/bootx64.efi (& .grb)
df /dev/sda1
cp /mnt/boot-sav/sda2/boot/efi/EFI/ubuntu/shimx64.efi /mnt/boot-sav/sda2/boot/efi/EFI/Boot/bootx64.efi (& .grb)
ls sda1/efi: /Microsoft/Boot/bootx64.efi.grb /Microsoft/Boot/bootx64.efi /Microsoft/Boot/bootmgfw.efi.grb /Microsoft/Boot/bootmgfw.efi /ubuntu/shimx64.efi /ubuntu/MokManager.efi /ubuntu/grubx64.efi /ubuntu/grub.cfg /ubuntu/fwupx64.efi /ubuntu/fw /Microsoft/Boot /Boot/bootx64.efi.grb /Boot/bootx64.efi
Add /mnt/boot-sav/sda2/boot/efi efi entries in /mnt/boot-sav/sda2/etc/grub.d/25_custom
Adding custom /mnt/boot-sav/sda2/boot/efi/EFI/ubuntu/fwupx64.efi
Adding custom /mnt/boot-sav/sda2/boot/efi/EFI/ubuntu/MokManager.efi

chroot /mnt/boot-sav/sda2 efibootmgr -v
BootCurrent: 0001
Timeout: 1 seconds
BootOrder: 0000,0001
Boot0000* ubuntu	HD(1,GPT,d22f631f-3a4d-4d5b-8be0-677c1d790153,0x800,0x100000)/File(EFIubuntushimx64.efi)
Boot0001* UEFI: PLDS DVD+/-RW DU-8A5LH	PciRoot(0x0)/Pci(0x1f,0x2)/Sata(1,65535,0)/CDROM(1,0xb0451,0x1280)..BO

chroot /mnt/boot-sav/sda2 update-grub
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-4.4.0-21-generic
Found initrd image: /boot/initrd.img-4.4.0-21-generic
Adding boot menu entry for EFI firmware configuration
Unhide GRUB boot menu in sda2/boot/grub/grub.cfg

Boot successfully repaired.

You can now reboot your computer.

Laurent85

Re : [RÉSOLU] Redémarrage impossible aprés installation: No device found.

L'ordi démarre en mode UEFI et ne trouve pas Windows d'où l'erreur device not found. C'est un défaut d'implémentation de l'UEFI du constructeur de l'ordi.

Dans cette situation le plus simple est de :

• désactiver l'UEFI dans le bios (quand c'est possible)

• à partir d'une session live supprimer la partition sda1 avec gparted

• créer une partition de 1Mo avec le drapeau bios_grub

• redémarrer l'ordi et la session live

• lancer un boot-repair pour qu'il installe le chargeur grub dans le MBR du disque

Si tu trouves ça trop compliqué ou si ça marche pas comme prévu, réinstalle en mode Legacy et sélectionne le type d'installation effacer le disque dur et installer Ubuntu.

Dernière modification par Laurent85 (Le 24/12/2016, à 12:03)

Petrusmok

Re : [RÉSOLU] Redémarrage impossible aprés installation: No device found.

Merci pour ta réponse rapide.
Entre temps, vu que la derniere ligne du bootinfo disait "boot successfully repaired you can now reboot your computer", j'ai enlevé le live c.d et redémarré.
Ca marche, j'ai accés a ubuntu via un grub version 2.2beta2 36ubuntu3.2 qui affiche 3 possibilités:
ubuntu
efi/ubuntu/fwupx64.efi
efi/ubuntu/mokmanager.efi
system setup
En choisissant ubuntu ca démarre mais c'est très lent avant d'arriver sur la session de travail.

Est ce que je tente quand même ce que tu préconises ?

Laurent85

Re : [RÉSOLU] Redémarrage impossible aprés installation: No device found.

Est ce que je tente quand même ce que tu préconises ?

Oh non puisque boot-repair a fonctionné reste comme ça. Le mode d'installation ne change pas le temps nécessaire au démarrage.

Donne des informations sur ton matériel, pour cela démarre ta session puis ouvre un terminal,

installe inxi :

sudo apt install inxi

génère le rapport et colle-le dans ta réponse entre balises de code :

inxi -Fxz

Dernière modification par Laurent85 (Le 24/12/2016, à 13:08)

Petrusmok

Re : [RÉSOLU] Redémarrage impossible aprés installation: No device found.

Voila le rapport

manfred@manfred-Inspiron-5758:~$ inxi -Fxz
System:    Host: manfred-Inspiron-5758 Kernel: 4.4.0-57-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: Unity 7.4.0 (Gtk 3.18.9-1ubuntu3.1)
           Distro: Ubuntu 16.04 xenial
Machine:   System: Dell (portable) product: Inspiron 5758 v: 01
           Mobo: Dell model: 0YT4VP v: A00 Bios: Dell v: A03 date: 07/14/2015
CPU:       Dual core Intel Core i7-5500U (-HT-MCP-) cache: 4096 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9577
           clock speeds: max: 3000 MHz 1: 499 MHz 2: 500 MHz 3: 499 MHz
           4: 499 MHz
Graphics:  Card-1: Intel Broadwell-U Integrated Graphics bus-ID: 00:02.0
           Card-2: NVIDIA GK208M [GeForce 920M] bus-ID: 08:00.0
           Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa) FAILED: nouveau
           Resolution: 1920x1080@60.00hz
           GLX Renderer: Mesa DRI Intel HD Graphics 5500 (Broadwell GT2)
           GLX Version: 3.0 Mesa 11.2.0 Direct Rendering: Yes
Audio:     Card-1 Intel Wildcat Point-LP High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0
           Card-2 Intel Broadwell-U Audio Controller
           driver: snd_hda_intel bus-ID: 00:03.0
           Sound: Advanced Linux Sound Architecture v: k4.4.0-57-generic
Network:   Card-1: Intel Wireless 3160 driver: iwlwifi bus-ID: 06:00.0
           IF: wlp6s0 state: down mac: <filter>
           Card-2: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
           driver: r8169 v: 2.3LK-NAPI port: e000 bus-ID: 07:00.0
           IF: enp7s0 state: down mac: <filter>
Drives:    HDD Total Size: 1000.2GB (1.3% used)
           ID-1: /dev/sda model: TOSHIBA_MQ01ABD1 size: 1000.2GB temp: 31C
Partition: ID-1: / size: 909G used: 4.8G (1%) fs: ext4 dev: /dev/sda2
           ID-2: swap-1 size: 8.50GB used: 0.00GB (0%) fs: swap dev: /dev/sda3
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 39.0C mobo: N/A gpu: 37.0
           Fan Speeds (in rpm): cpu: N/A fan-2: 0
Info:      Processes: 223 Uptime: 21 min Memory: 1052.4/7894.4MB
           Init: systemd runlevel: 5 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.461) inxi: 2.2.35 
manfred@manfred-Inspiron-5758:~$ ^C
manfred@manfred-Inspiron-5758:~$ 

Laurent85

Re : [RÉSOLU] Redémarrage impossible aprés installation: No device found.

La ram et le cpu rien à signaler, la lenteur au démarrage est liée aux limites du disque dur mécanique, et c'est un 5400 t/mn comparé aux 7200 t/mn mieux adaptés en disque mécanique pour un système d'exploitation. Une fois démarré ce devrait être suffisamment fluide à l'utilisation.

Si la garantie le permet ou quand elle aura expirée envisage l'installation d'un ssd à la place tu ne reconnaîtras pas ton ordi. C'est une aberration à mon avis ce modèle de disque dur sur ton ordi compte tenu des autres composants.

Autre chose concernant le pilote de la carte graphique, installe éventuellement le pilote Nvidia pour bénéficier de ta carte graphique dédiée GeForce 920M, regarde pour cela Pilotes additionnels. Tu utilises actuellement la puce graphique Intel intégrée au processeur. Redémarre ensuite.

Petrusmok

Re : [RÉSOLU] Redémarrage impossible aprés installation: No device found.

Ok, mais je ne comprends toujours pas pourquoi un grub s'affiche au démarrage.
Sur mon propre ordi je n'en ai pas avec la 16.04.
Et cette lenteur me semble anormale.
Cette histoire de uefi a du faire foirer mon installation.
Comment faire en sorte qu'ubuntu démarre normalement, sans m'afficher un grub avec plusieurs choix au démarrage vu que je suis ne suis pas en dualboot avec un autre systeme.
La première solution que tu proposais résoudrait-elle le problème ?

Laurent85

Re : [RÉSOLU] Redémarrage impossible aprés installation: No device found.

Ok, mais je ne comprends toujours pas pourquoi un grub s'affiche au démarrage.
Sur mon propre ordi je n'en ai pas avec la 16.04.

C'est boot repair qui a changé le paramètre.

Et cette lenteur me semble anormale.
Cette histoire de uefi a du faire foirer mon installation.

Il met combien de temps pour démarrer entre le bouton marche et l'arrivée au bureau ?

Comment faire en sorte qu'ubuntu démarre normalement, sans m'afficher un grub avec plusieurs choix au démarrage vu que je suis ne suis pas en dualboot avec un autre systeme.

C'est un paramètre à changer, ouvre un terminal,

donne la configuration actuelle de grub :

cat /etc/default/grub

La première solution que tu proposais résoudrait-elle le problème ?

Non comme je l'ai déjà indiqué. Ce que tu peux faire étant donné qu'il n'y a pas encore de données installée, réinstalle en mode Legacy si tu veux en être sûr en le constatant par toi-même.

Petrusmok

Re : [RÉSOLU] Redémarrage impossible aprés installation: No device found.

Bon, j'ai désactivé le mode uefi et selectionné le mode legacy dans le bios.
Ensuite de quoi j'ai réinstallé ubuntu 16.04 64 bit depuis un live c.d.
L'ordi redémarre bien sur ubuntu directement, sans grub mais avec au moins 3 minutes avant d'arriver au bureau.
Aprés le logo Dell, un écran violet qui dure, puis le logo ubuntu avec ses petits points qui défilent, puis écran noir qui dure...
Et d'un coup la session s'ouvre.
Voici le résultat de la configuration du grub maintenant:

To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.

manfred@manfred-Inspiron-5758:~$ cat /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
manfred@manfred-Inspiron-5758:~$ ^C
manfred@manfred-Inspiron-5758:~$ 

Laurent85

Re : [RÉSOLU] Redémarrage impossible aprés installation: No device found.

Donc grub c'est réglé par la nouvelle installation en mode Legacy.

3 minutes ça me paraît quand même beaucoup, le disque est lent mais quand même ,

donne le résultat de ces commandes concernant les processus au démarrage :

systemd-analyze blame
systemd-analyze critical-chain

Petrusmok

Re : [RÉSOLU] Redémarrage impossible aprés installation: No device found.

Résultat première commande:

manfred@manfred-Inspiron-5758:~$ systemd-analyze blame
         20.610s apparmor.service
          8.148s dev-sda1.device
          5.715s ModemManager.service
          4.871s accounts-daemon.service
          3.913s console-setup.service
          3.674s grub-common.service
          3.345s lightdm.service
          3.244s NetworkManager.service
          3.164s networking.service
          2.990s gpu-manager.service
          2.781s apport.service
          2.487s upower.service
          2.420s pppd-dns.service
          2.380s plymouth-quit-wait.service
          2.342s rsyslog.service
          2.318s irqbalance.service
          2.016s systemd-logind.service
          1.982s thermald.service
          1.952s speech-dispatcher.service
          1.811s polkitd.service
          1.646s plymouth-start.service
          1.482s keyboard-setup.service
          1.393s avahi-daemon.service

manfred@manfred-Inspiron-5758:~$ 

Résultat deuxième commande:

manfred@manfred-Inspiron-5758:~$ systemd-analyze critical-chain
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @33.218s
└─lightdm.service @29.853s +3.345s
  └─systemd-user-sessions.service @28.198s +208ms
    └─basic.target @25.772s
      └─sockets.target @25.771s
        └─snapd.socket @25.700s +37ms
          └─sysinit.target @25.625s
            └─apparmor.service @4.979s +20.610s
              └─local-fs.target @4.856s
                └─local-fs-pre.target @4.823s
                  └─systemd-remount-fs.service @4.737s +73ms
                    └─systemd-journald.socket @2.397s
                      └─-.mount @2.340s
                        └─system.slice @2.397s
                          └─-.slice @2.340s
manfred@manfred-Inspiron-5758:~$ 

Laurent85

Re : [RÉSOLU] Redémarrage impossible aprés installation: No device found.

Rien d'évident pour moi, installe et génère éventuellement le rapport SMART sur la santé du disque,

installe l'utilitaire :

sudo apt install smartmontools --no-install-recommends

génère le rapport et colle-le dans ta réponse :

sudo smartctl -iHA --log=error /dev/sda

Petrusmok

Re : [RÉSOLU] Redémarrage impossible aprés installation: No device found.

Ok,voici le rapport:

manfred@manfred-Inspiron-5758:~$ sudo smartctl -iHA --log=error /dev/sda
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-57-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 2.5" HDD MQ01ABD...
Device Model:     TOSHIBA MQ01ABD100
Serial Number:    25HTTIP2T
LU WWN Device Id: 5 000039 611e071f6
Firmware Version: AX0P2D
User Capacity:    1 000 204 886 016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Dec 24 18:22:19 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 128
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       1474
  5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   095   095   000    Old_age   Always       -       2282
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       2076
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       666
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       210
193 Load_Cycle_Count        0x0032   099   099   000    Old_age   Always       -       11594
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       30 (Min/Max 12/40)
199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       15933725
200 Multi_Zone_Error_Rate   0x0032   100   100   000    Old_age   Always       -       50468672
240 Head_Flying_Hours       0x0032   096   096   000    Old_age   Always       -       1839
241 Total_LBAs_Written      0x0032   100   100   000    Old_age   Always       -       3139011935
242 Total_LBAs_Read         0x0032   100   100   000    Old_age   Always       -       5164201149
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 2
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2 occurred at disk power-on lifetime: 1932 hours (80 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 98 7f e7 94 40  Error: ICRC, ABRT at LBA = 0x0094e77f = 9758591

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 40 98 40 e7 94 40 00      00:02:47.176  READ FPDMA QUEUED
  60 c8 90 58 03 69 40 00      00:02:47.153  READ FPDMA QUEUED
  60 00 88 58 02 69 40 00      00:02:47.153  READ FPDMA QUEUED
  60 00 80 58 01 69 40 00      00:02:47.153  READ FPDMA QUEUED
  60 00 78 58 00 69 40 00      00:02:47.130  READ FPDMA QUEUED

Error 1 occurred at disk power-on lifetime: 355 hours (14 days + 19 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 28 37 17 71 40  Error: ICRC, ABRT at LBA = 0x00711737 = 7411511

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 50 f0 5f e0 40 00      00:04:08.888  READ FPDMA QUEUED
  60 08 48 28 db 8c 40 00      00:04:08.885  READ FPDMA QUEUED
  60 08 40 48 5e 8c 40 00      00:04:08.884  READ FPDMA QUEUED
  60 08 38 50 b0 70 40 00      00:04:08.870  READ FPDMA QUEUED
  60 08 30 70 5e 8c 40 00      00:04:08.863  READ FPDMA QUEUED

manfred@manfred-Inspiron-5758:~$ 

Petrusmok

Re : [RÉSOLU] Redémarrage impossible aprés installation: No device found.

Sinon il y a un problème sur cet ordi de non reconnaissance du chargeur secteur (dans le bios), du coup, la batterie toute neuve et de marque dell ne fonctionne pas.
Le chargeur est bien d'origine mais sûrement défectueux.
C'est possible que l'ordi bug au démarrage parce que la batterie est présente ?
Je peux essayer sans...

Petrusmok

Re : [RÉSOLU] Redémarrage impossible aprés installation: No device found.

Bon sans la batterie ça change rien...
En tous cas, merci de ton aide laurent85 et joyeux noël !

Laurent85

Re : [RÉSOLU] Redémarrage impossible aprés installation: No device found.

Attention quand tu manipules ton ordi, le disque a pris 666 chocs et c'est pas bon pour lui :

191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       666

Il semble aussi que le support magnétique et la mécanique du disque fatiguent, vérifie dans les jours / semaines à venir l'état de ces deux indicateurs, je ne peux pas te dire ce que signifient le niveau de ces nombres, mais s'ils augmentent de façon importante c'est pas bon à mon avis :

199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       15933725
200 Multi_Zone_Error_Rate   0x0032   100   100   000    Old_age   Always       -       50468672

Joyeux Noël Petrusmok

Dernière modification par Laurent85 (Le 24/12/2016, à 20:44)