#51 Le 30/12/2016, à 11:06
- CN46400
Re : Pagaille dans le landernau
jordanne@jordanne-desktop:~$ sudo apt-get install --no-install-recommends smartmontools
[sudo] password for jordanne:
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Paquets suggérés :
gsmartcontrol smart-notifier
Paquets recommandés :
mailx mailutils
Les NOUVEAUX paquets suivants seront installés :
smartmontools
0 mis à jour, 1 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 455 ko dans les archives.
Après cette opération, 1 315 ko d'espace disque supplémentaires seront utilisés.
Réception de : 1 http://fr.archive.ubuntu.com/ubuntu/ precise/main smartmontools i386 5.41+svn3365-1 [455 kB]
455 ko réceptionnés en 0s (602 ko/s)
Sélection du paquet smartmontools précédemment désélectionné.
(Lecture de la base de données... 263704 fichiers et répertoires déjà installés.)
Dépaquetage de smartmontools (à partir de .../smartmontools_5.41+svn3365-1_i386.deb) ...
Traitement des actions différées (« triggers ») pour « man-db »...
Traitement des actions différées (« triggers ») pour « ureadahead »...
ureadahead will be reprofiled on next reboot
Paramétrage de smartmontools (5.41+svn3365-1) ...
jordanne@jordanne-desktop:~$ jordanne@jordanne-desktop:~$ sudo smartctl -s on -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-119-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar T7K250
Device Model: HDT722525DLAT80
Serial Number: VD241DT7CAWK5C
LU WWN Device Id: 5 000cca 20cc4f325
Firmware Version: V44OA96A
User Capacity: 250 059 350 016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1
Local Time is: Fri Dec 30 09:44:50 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4797) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 80) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 096 096 016 Pre-fail Always - 131078
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 114 114 024 Pre-fail Always - 305 (Average 307)
4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 7718
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 1
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 18216
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 7434
192 Power-Off_Retract_Count 0x0032 094 094 050 Old_age Always - 8171
193 Load_Cycle_Count 0x0012 094 094 050 Old_age Always - 8171
194 Temperature_Celsius 0x0002 148 148 000 Old_age Always - 37 (Min/Max 12/50)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
jordanne@jordanne-desktop:~$ jordanne@jordanne-desktop:~$ sudo smartctl -s on -a /dev/sdb
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-119-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Maxtor DiamondMax 21
Device Model: MAXTOR STM3160215A
Serial Number: 9RA0LCKS
Firmware Version: 3.AAC
User Capacity: 160 041 885 696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Fri Dec 30 09:46:56 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 54) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 119 097 006 Pre-fail Always - 205705014
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 093 093 020 Old_age Always - 7854
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 486858865
9 Power_On_Hours 0x0032 055 055 000 Old_age Always - 39443
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 093 093 020 Old_age Always - 7497
187 Reported_Uncorrect 0x0032 088 088 000 Old_age Always - 12
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 074 046 045 Old_age Always - 26 (Min/Max 26/26)
194 Temperature_Celsius 0x0022 026 054 000 Old_age Always - 26 (0 14 0 0)
195 Hardware_ECC_Recovered 0x001a 085 064 000 Old_age Always - 86803354
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 2
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 42 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 42 occurred at disk power-on lifetime: 29926 hours (1246 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 b9 51 ae ed Error: UNC at LBA = 0x0dae51b9 = 229527993
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 58 b8 51 ae ed 00 00:00:54.621 READ DMA
27 00 00 00 00 00 e0 00 00:00:54.550 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:00:54.538 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 00:00:54.521 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:00:54.462 READ NATIVE MAX ADDRESS EXT
Error 41 occurred at disk power-on lifetime: 29926 hours (1246 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 b9 51 ae ed Error: UNC at LBA = 0x0dae51b9 = 229527993
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 58 b8 51 ae ed 00 00:00:48.489 READ DMA
27 00 00 00 00 00 e0 00 00:00:48.429 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:00:48.422 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 00:00:45.552 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:00:45.483 READ NATIVE MAX ADDRESS EXT
Error 40 occurred at disk power-on lifetime: 29926 hours (1246 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 b9 51 ae ed Error: UNC at LBA = 0x0dae51b9 = 229527993
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 58 b8 51 ae ed 00 00:00:48.489 READ DMA
27 00 00 00 00 00 e0 00 00:00:48.429 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:00:48.422 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 00:00:45.552 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:00:45.483 READ NATIVE MAX ADDRESS EXT
Error 39 occurred at disk power-on lifetime: 29926 hours (1246 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 b9 51 ae ed Error: UNC at LBA = 0x0dae51b9 = 229527993
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 58 b8 51 ae ed 00 00:00:39.491 READ DMA
27 00 00 00 00 00 e0 00 00:00:39.488 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:00:39.485 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 00:00:45.552 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:00:45.483 READ NATIVE MAX ADDRESS EXT
Error 38 occurred at disk power-on lifetime: 29926 hours (1246 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 b9 51 ae ed Error: UNC at LBA = 0x0dae51b9 = 229527993
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 58 b8 51 ae ed 00 00:00:39.491 READ DMA
27 00 00 00 00 00 e0 00 00:00:39.488 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:00:39.485 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 00:00:39.481 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:00:39.477 READ NATIVE MAX ADDRESS EXT
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
jordanne@jordanne-desktop:~$ jordanne@jordanne-desktop:~$ sudo smartctl -s on -a /dev/sdc
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-119-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Maxtor DiamondMax 21
Device Model: MAXTOR STM3160215A
Serial Number: 9RA9ZBVS
Firmware Version: 3.AAD
User Capacity: 160 041 885 696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Fri Dec 30 09:50:26 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 54) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 119 097 006 Pre-fail Always - 203937669
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 094 094 020 Old_age Always - 6287
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always - 213908258
9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 10213
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 095 095 020 Old_age Always - 5935
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 073 047 045 Old_age Always - 27 (Min/Max 27/27)
194 Temperature_Celsius 0x0022 027 053 000 Old_age Always - 27 (0 14 0 0)
195 Hardware_ECC_Recovered 0x001a 087 068 000 Old_age Always - 127081431
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
jordanne@jordanne-desktop:~$ Hors ligne
#52 Le 30/12/2016, à 11:18
- CN46400
Re : Pagaille dans le landernau
Réponse 5 à #50
jordanne@jordanne-desktop:~$ df -Th | grep -Ev "devpts|none|proc|sys|tmpfs|udev"; echo; df -Ti | grep -Ev "devpts|none|proc|sys|tmpfs|udev"
Sys. de fichiers Type Taille Utilisé Dispo Uti% Monté sur
/dev/sda5 ext4 113G 40G 68G 37% /
/dev/sdb1 ext2 73G 52M 69G 1% /media/xubuntu
/dev/sdc1 fuseblk 66G 4,2G 62G 7% /media/System
/dev/sdc5 ext4 47G 5,3G 39G 13% /media/c04045bf-9b9f-465e-9fb9-3f0b59d1006a
/dev/sdb5 ext4 74G 36G 35G 51% /media/e7d1c76c-9514-4b58-8d36-3741887af58a
/dev/sdc7 ext4 35G 5,3G 28G 17% /media/71498932-389d-406f-aade-6b6d6b58c85e
/dev/sda1 fuseblk 117G 8,7G 109G 8% /media/System_
Réponse 5 à #50
Sys. de fichiers Type Inœuds IUtil. ILibre IUti% Monté sur
/dev/sda5 ext4 7512064 391497 7120567 6% /
/dev/sdb1 ext2 4808704 15 4808689 1% /media/xubuntu
/dev/sdc1 fuseblk 64816416 22265 64794151 1% /media/System
/dev/sdc5 ext4 3088384 286745 2801639 10% /media/c04045bf-9b9f-465e-9fb9-3f0b59d1006a
/dev/sdb5 ext4 4874240 1219356 3654884 26% /media/e7d1c76c-9514-4b58-8d36-3741887af58a
/dev/sdc7 ext4 2281104 259165 2021939 12% /media/71498932-389d-406f-aade-6b6d6b58c85e
/dev/sda1 fuseblk 113531632 56897 113474735 1% /media/System_
jordanne@jordanne-desktop:~$Dernière modification par CN46400 (Le 30/12/2016, à 11:21)
Hors ligne