Pages : 1
#1 Le 05/01/2017, à 12:09
- kloklo28
Erreur dans le dmesg, démarrage lent. (résolu)
Bonjour,
Voulant me remettre à Linux et novice j'ai quelques problèmes. Mon anglais scolaire de bas niveau fait que je ne comprends pas tout.
[ 0.828615] hw unit of domain pp1-gpu 2^-16 Joules
[ 0.828708] Scanning for low memory corruption every 60 seconds
[ 0.829130] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.829171] audit: initializing netlink subsys (disabled)
[ 0.829190] audit: type=2000 audit(1483609807.784:1): initialized
[ 0.829586] Initialise system trusted keyring
[ 0.829702] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.831295] zbud: loaded
[ 0.831511] VFS: Disk quotas dquot_6.6.0
[ 0.831549] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.831843] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.832101] fuse init (API version 7.23)
[ 0.832256] Key type big_key registered
[ 0.832285] Allocating IMA MOK and blacklist keyrings.
[ 0.832705] Key type asymmetric registered
[ 0.832710] Asymmetric key parser 'x509' registered
[ 0.832749] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.832780] io scheduler noop registered
[ 0.832782] io scheduler deadline registered (default)
[ 0.832816] io scheduler cfq registered
[ 0.833392] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.833400] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.833437] intel_idle: MWAIT substates: 0x21120
[ 0.833439] intel_idle: v0.4.1 model 0x2A
[ 0.833440] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.039981] ACPI: AC Adapter [ACAD] (on-line)
[ 1.040075] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[ 1.040080] ACPI: Power Button [PWRB]
[ 1.040120] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input1
[ 1.040150] ACPI: Lid Switch [LID0]
[ 1.040187] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input2
[ 1.040190] ACPI: Sleep Button [SLPB]
[ 1.040231] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.040233] ACPI: Power Button [PWRF]
[ 1.040755] GHES: HEST is not enabled!
[ 1.040971] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.399755] ACPI: Battery Slot [BAT0] (battery present)
[ 1.399933] Linux agpgart interface v0.103
[ 1.402951] brd: module loaded
[ 1.404349] loop: module loaded
[ 1.404580] libphy: Fixed MDIO Bus: probed
[ 1.404584] tun: Universal TUN/TAP device driver, 1.6
[ 1.404585] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.404630] PPP generic driver version 2.4.2
[ 1.404694] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.404698] ehci-pci: EHCI PCI platform driver
[ 1.404827] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.404834] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.404849] ehci-pci 0000:00:1a.0: debug port 2
[ 1.408766] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.408780] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc130a000
[ 1.419754] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.419869] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.419871] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.419873] usb usb1: Product: EHCI Host Controller
[ 1.419875] usb usb1: Manufacturer: Linux 4.4.0-57-generic ehci_hcd
[ 1.419876] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.420008] hub 1-0:1.0: USB hub found
[ 1.420015] hub 1-0:1.0: 2 ports detected
[ 1.420222] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.420228] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.420242] ehci-pci 0000:00:1d.0: debug port 2
[ 1.424145] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.424155] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1309000
[ 1.435773] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.435882] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.435884] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.435886] usb usb2: Product: EHCI Host Controller
[ 1.435888] usb usb2: Manufacturer: Linux 4.4.0-57-generic ehci_hcd
[ 1.435890] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.436020] hub 2-0:1.0: USB hub found
[ 1.436026] hub 2-0:1.0: 2 ports detected
[ 1.436133] ehci-platform: EHCI generic platform driver
[ 1.436147] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.436152] ohci-pci: OHCI PCI platform driver
[ 1.436163] ohci-platform: OHCI generic platform driver
[ 1.436171] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.436260] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1.436265] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[ 1.436463] xhci_hcd 0000:05:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
[ 1.436666] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.436668] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.436670] usb usb3: Product: xHCI Host Controller
[ 1.436672] usb usb3: Manufacturer: Linux 4.4.0-57-generic xhci-hcd
[ 1.436673] usb usb3: SerialNumber: 0000:05:00.0
[ 1.436787] hub 3-0:1.0: USB hub found
[ 1.436799] hub 3-0:1.0: 2 ports detected
[ 1.436897] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1.436900] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[ 1.439870] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.439887] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.439889] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.439890] usb usb4: Product: xHCI Host Controller
[ 1.439892] usb usb4: Manufacturer: Linux 4.4.0-57-generic xhci-hcd
[ 1.439894] usb usb4: SerialNumber: 0000:05:00.0
[ 1.440002] hub 4-0:1.0: USB hub found
[ 1.440014] hub 4-0:1.0: 2 ports detected
[ 1.440151] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 1.498866] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.498872] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.498983] mousedev: PS/2 mouse device common for all mice
[ 1.502282] rtc_cmos 00:01: RTC can wake from S4
[ 1.502462] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.502496] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.502506] i2c /dev entries driver
[ 1.502564] device-mapper: uevent: version 1.0.3
[ 1.502638] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.502659] Intel P-state driver initializing.
[ 1.502826] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.503812] NET: Registered protocol family 10
[ 1.504328] NET: Registered protocol family 17
[ 1.504367] Key type dns_resolver registered
[ 1.504928] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
[ 1.504949] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
[ 1.504962] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
[ 1.504984] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
[ 1.505096] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.505542] registered taskstats version 1
[ 1.505579] Loading compiled-in X.509 certificates
[ 1.508069] Loaded X.509 cert 'Build time autogenerated kernel key: b6199044dc0d1db0336e3627c6468585f3036ddc'
[ 1.508092] zswap: loaded using pool lzo/zbud
[ 1.510076] Key type trusted registered
[ 1.513309] Key type encrypted registered
[ 1.513319] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.513324] ima: No TPM chip found, activating TPM-bypass!
[ 1.513348] evm: HMAC attrs: 0x1
[ 1.513753] Magic number: 1:85:828
[ 1.513863] rtc_cmos 00:01: setting system clock to 2017-01-05 09:50:09 UTC (1483609809)
[ 1.513929] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.513931] EDD information not available.
[ 1.514010] PM: Hibernation image not present or could not be loaded.
[ 1.514911] Freeing unused kernel memory: 1496K (ffffffff81f47000 - ffffffff820bd000)
[ 1.514912] Write protecting the kernel read-only data: 14336k
[ 1.515454] Freeing unused kernel memory: 2008K (ffff88000180a000 - ffff880001a00000)
[ 1.515861] Freeing unused kernel memory: 120K (ffff880001de2000 - ffff880001e00000)
[ 1.527402] systemd-udevd[135]: starting version 204
[ 1.538575] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.564010] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.731791] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.747696] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.747715] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[ 1.827777] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[ 1.827789] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns
[ 1.864548] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.864552] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.865144] hub 1-1:1.0: USB hub found
[ 1.865381] hub 1-1:1.0: 6 ports detected
[ 1.880396] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.880400] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.880745] hub 2-1:1.0: USB hub found
[ 1.881027] hub 2-1:1.0: 6 ports detected
[ 1.902070] usb 3-2: New USB device found, idVendor=4168, idProduct=1012
[ 1.902075] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.902077] usb 3-2: Product: Targus Wireless Mouse
[ 1.902079] usb 3-2: Manufacturer: reserved
[ 1.959922] ahci 0000:00:1f.2: version 3.0
[ 1.960118] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.960155] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 1.960160] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[ 1.968317] scsi host0: ahci
[ 1.968433] scsi host1: ahci
[ 1.968532] scsi host2: ahci
[ 1.968634] scsi host3: ahci
[ 1.968733] scsi host4: ahci
[ 1.971725] scsi host5: ahci
[ 1.971817] ata1: SATA max UDMA/133 abar m2048@0xc1308000 port 0xc1308100 irq 30
[ 1.971819] ata2: DUMMY
[ 1.971822] ata3: SATA max UDMA/133 abar m2048@0xc1308000 port 0xc1308200 irq 30
[ 1.971824] ata4: DUMMY
[ 1.971825] ata5: DUMMY
[ 1.971826] ata6: DUMMY
[ 1.989037] atl1c 0000:02:00.0: version 1.0.1.1-NAPI
[ 1.992530] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.006012] usbcore: registered new interface driver usbhid
[ 2.006015] usbhid: USB HID core driver
[ 2.010448] input: reserved Targus Wireless Mouse as /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb3/3-2/3-2:1.0/0003:4168:1012.0001/input/input7
[ 2.010623] hid-generic 0003:4168:1012.0001: input,hiddev0,hidraw0: USB HID v1.11 Mouse [reserved Targus Wireless Mouse] on usb-0000:05:00.0-2/input0
[ 2.135666] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 2.279567] usb 1-1.3: New USB device found, idVendor=064e, idProduct=d20c
[ 2.279571] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.279573] usb 1-1.3: Product: 1.3M HD WebCam
[ 2.279575] usb 1-1.3: Manufacturer: SuYin
[ 2.279576] usb 1-1.3: SerialNumber: HF2015-A821-OV01-VA-R01.01.01
[ 2.291714] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.294584] ata1.00: ATA-7: FUJITSU MHV2120BH, 00000029, max UDMA/100
[ 2.294588] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.299578] ata1.00: configured for UDMA/100
[ 2.299992] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2120B 0029 PQ: 0 ANSI: 5
[ 2.300375] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 2.300398] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.300456] sd 0:0:0:0: [sda] Write Protect is off
[ 2.300462] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.300496] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.351718] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[ 2.362315] sda: sda1 sda2 < sda5 >
[ 2.362824] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.457555] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0138
[ 2.457560] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.457562] usb 1-1.4: Product: USB2.0-CRW
[ 2.457564] usb 1-1.4: Manufacturer: Generic
[ 2.457565] usb 1-1.4: SerialNumber: 20090516388200000
[ 2.467293] usbcore: registered new interface driver usb-storage
[ 2.468878] usbcore: registered new interface driver uas
[ 2.470317] ums-realtek 1-1.4:1.0: USB Mass Storage device detected
[ 2.489795] scsi host6: usb-storage 1-1.4:1.0
[ 2.489907] usbcore: registered new interface driver ums-realtek
[ 2.619698] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.621423] ata3.00: ATAPI: MATSHITADVD-RAM UJ8B0, 1.00, max UDMA/100
[ 2.626511] ata3.00: configured for UDMA/100
[ 2.637860] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8B0 1.00 PQ: 0 ANSI: 5
[ 2.658988] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.658992] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.659211] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.659312] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.690053] usb 1-1.4: USB disconnect, device number 4
[ 2.827893] clocksource: Switched to clocksource tsc
[ 3.167177] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.854144] psmouse serio1: synaptics: queried max coordinates: x [..5774], y [..5022]
[ 4.020840] random: nonblocking pool is initialized
[ 4.088743] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1694, fw id: 705179
[ 4.240217] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 17.128792] Adding 4173820k swap on /dev/sda5. Priority:-1 extents:1 across:4173820k FS
[ 17.547858] systemd-udevd[335]: starting version 204
[ 17.877848] wmi: Mapper loaded
[ 17.880935] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 17.891280] lp: driver loaded but no devices found
[ 17.897659] ppdev: user-space parallel port driver
[ 18.086538] acpi device:35: registered as cooling_device4
[ 18.086598] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:34/LNXVIDEO:01/input/input8
[ 18.086689] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 18.089952] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 18.089964] acer_wmi: Function bitmap for Communication Button: 0x1
[ 18.090171] input: Acer WMI hotkeys as /devices/virtual/input/input9
[ 18.090394] input: Acer BMA150 accelerometer as /devices/virtual/input/input10
[ 18.368120] intel_rapl: Found RAPL domain package
[ 18.368125] intel_rapl: Found RAPL domain core
[ 18.368131] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 18.521504] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.527149] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[ 18.527159] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 18.527165] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 18.527171] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 18.527174] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 18.527180] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 18.527290] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 18.527297] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 18.527300] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 19.133235] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 19.141056] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 19.162343] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x598301f0
[ 19.162922] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 19.162925] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 19.162927] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 19.162929] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 19.162930] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 19.162933] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x1b
[ 19.162935] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 19.169632] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 19.169729] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 19.182115] [drm] Initialized drm 1.1.0 20060810
[ 19.807118] media: Linux media interface: v0.10
[ 19.826659] Linux video capture interface: v2.00
[ 19.887277] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (064e:d20c)
[ 19.890566] input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input14
[ 19.890642] usbcore: registered new interface driver uvcvideo
[ 19.890644] USB Video Class driver (1.1.1)
[ 20.021965] [drm] radeon kernel modesetting enabled.
[ 20.024646] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 20.024649] AMD IOMMUv2 functionality not available on this system
[ 20.091516] audit: type=1400 audit(1483609828.076:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=448 comm="apparmor_parser"
[ 20.091526] audit: type=1400 audit(1483609828.076:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=448 comm="apparmor_parser"
[ 20.091532] audit: type=1400 audit(1483609828.076:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=448 comm="apparmor_parser"
[ 20.091543] audit: type=1400 audit(1483609828.076:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=443 comm="apparmor_parser"
[ 20.091552] audit: type=1400 audit(1483609828.076:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=443 comm="apparmor_parser"
[ 20.091558] audit: type=1400 audit(1483609828.076:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=443 comm="apparmor_parser"
[ 20.092428] audit: type=1400 audit(1483609828.076:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=448 comm="apparmor_parser"
[ 20.092436] audit: type=1400 audit(1483609828.076:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=448 comm="apparmor_parser"
[ 20.092454] audit: type=1400 audit(1483609828.076:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=443 comm="apparmor_parser"
[ 20.092461] audit: type=1400 audit(1483609828.076:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=443 comm="apparmor_parser"
[ 20.121207] CRAT table not found
[ 20.121210] Finished initializing topology ret=0
[ 20.121261] kfd kfd: Initialized module
[ 20.121947] [drm] initializing kernel modesetting (TURKS 0x1002:0x6741 0x1025:0x050E).
[ 20.121998] [drm] register mmio base: 0xC0300000
[ 20.122000] [drm] register mmio size: 131072
[ 20.122056] ATOM BIOS: Acer
[ 20.122237] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 20.122241] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 20.122244] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 20.122246] [drm] RAM width 128bits DDR
[ 20.122299] [TTM] Zone kernel: Available graphics memory: 2013912 kiB
[ 20.122302] [TTM] Initializing pool allocator
[ 20.122310] [TTM] Initializing DMA pool allocator
[ 20.122335] [drm] radeon: 1024M of VRAM memory ready
[ 20.122338] [drm] radeon: 1024M of GTT memory ready.
[ 20.122353] [drm] Loading TURKS Microcode
[ 20.183533] cfg80211: World regulatory domain updated:
[ 20.183537] cfg80211: DFS Master region: unset
[ 20.183538] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 20.183541] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 20.183544] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 20.183545] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 20.183547] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 20.183549] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 21.180372] [drm] Internal thermal controller with fan control
[ 21.184752] [drm] radeon: dpm initialized
[ 21.277329] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 21.278077] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 21.290843] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 21.290967] radeon 0000:01:00.0: WB enabled
[ 21.290971] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880148e8dc00
[ 21.290973] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880148e8dc0c
[ 21.292422] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001432118
[ 21.292425] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 21.292426] [drm] Driver supports precise vblank timestamp query.
[ 21.292428] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 21.292476] radeon 0000:01:00.0: radeon: using MSI.
[ 21.292520] [drm] radeon: irq initialized.
[ 21.309148] [drm] ring test on 0 succeeded in 2 usecs
[ 21.309164] [drm] ring test on 3 succeeded in 9 usecs
[ 21.485117] [drm] ring test on 5 succeeded in 2 usecs
[ 21.485129] [drm] UVD initialized successfully.
[ 21.485440] [drm] ib test on ring 0 succeeded in 0 usecs
[ 21.485494] [drm] ib test on ring 3 succeeded in 0 usecs
[ 21.507393] wl: module license 'MIXED/Proprietary' taints kernel.
[ 21.507396] Disabling lock debugging due to kernel taint
[ 21.509734] wl: module verification failed: signature and/or required key missing - tainting kernel
[ 21.587589] wlan0: Broadcom BCM4358 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
[ 22.116640] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 22.133348] [drm] ib test on ring 5 succeeded
[ 22.197351] [drm] radeon atom DIG backlight initialized
[ 22.197364] [drm] Radeon Display Connectors
[ 22.197367] [drm] Connector 0:
[ 22.197371] [drm] LVDS-1
[ 22.197377] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 22.197380] [drm] Encoders:
[ 22.197383] [drm] LCD1: INTERNAL_UNIPHY
[ 22.197386] [drm] Connector 1:
[ 22.197389] [drm] HDMI-A-1
[ 22.197391] [drm] HPD1
[ 22.197396] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 22.197406] [drm] Encoders:
[ 22.197407] [drm] DFP1: INTERNAL_UNIPHY1
[ 22.197408] [drm] Connector 2:
[ 22.197409] [drm] VGA-1
[ 22.197410] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 22.197411] [drm] Encoders:
[ 22.197412] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 22.379637] init: failsafe main process (649) killed by TERM signal
[ 23.655432] init: cups main process (789) killed by HUP signal
[ 23.655444] init: cups main process ended, respawning
[ 23.874605] [drm] fb mappable at 0xB0475000
[ 23.874609] [drm] vram apper at 0xB0000000
[ 23.874611] [drm] size 5787648
[ 23.874613] [drm] fb depth is 24
[ 23.874615] [drm] pitch is 6400
[ 23.874916] fbcon: radeondrmfb (fb0) is primary device
[ 30.726690] Console: switching to colour frame buffer device 200x56
[ 30.733194] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 30.956358] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[ 31.145984] audit_printk_skb: 165 callbacks suppressed
[ 31.145985] audit: type=1400 audit(1483609839.132:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=982 comm="apparmor_parser"
[ 31.281450] Bluetooth: Core ver 2.21
[ 31.281469] NET: Registered protocol family 31
[ 31.281470] Bluetooth: HCI device and connection manager initialized
[ 31.281474] Bluetooth: HCI socket layer initialized
[ 31.281476] Bluetooth: L2CAP socket layer initialized
[ 31.281484] Bluetooth: SCO socket layer initialized
[ 31.310043] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 31.310045] Bluetooth: BNEP filters: protocol multicast
[ 31.310049] Bluetooth: BNEP socket layer initialized
[ 31.453599] Bluetooth: RFCOMM TTY layer initialized
[ 31.453603] Bluetooth: RFCOMM socket layer initialized
[ 31.453608] Bluetooth: RFCOMM ver 1.11
[ 32.341760] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<1000 Mbps Full Duplex>
[ 53.174825] audit: type=1400 audit(1483609861.154:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1406 comm="apparmor_parser"
[ 53.174833] audit: type=1400 audit(1483609861.154:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1406 comm="apparmor_parser"
[ 53.175441] audit: type=1400 audit(1483609861.158:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1406 comm="apparmor_parser"
[ 60.649265] init: plymouth-upstart-bridge main process ended, respawning
[ 60.655214] init: plymouth-upstart-bridge main process (1429) terminated with status 1
[ 60.655227] init: plymouth-upstart-bridge main process ended, respawning
[ 76.307149] UDF-fs: error (device sr0): udf_read_inode: (ino 2293422) failed !bh
[ 76.340974] UDF-fs: error (device sr0): udf_read_inode: (ino 2293421) failed !bh
[ 76.374820] UDF-fs: error (device sr0): udf_read_inode: (ino 2293420) failed !bh
[ 76.408636] UDF-fs: error (device sr0): udf_read_inode: (ino 2293419) failed !bh
[ 76.408645] UDF-fs: Failed to read VAT inode from the last recorded block (2293422), retrying with the last block of the device (2293423).
[ 76.770454] UDF-fs: INFO Mounting volume 'UDF Volume', timestamp 2015/06/17 18:30 (103c)
root@kloklo28-Aspire-7750G:~# Dernière modification par kloklo28 (Le 09/01/2017, à 10:33)
Portable ACER Aspire7750G Carte Radéon HD Intel Core i3-2230M CPU2.0GHz x 4 64 bits ubuntu16.04 LTLS, Windows 7
Portable HP Pavilion dv7 Intellronlake Intel Core i5 CPU M430 2.27 GHz x 4 64 bits ubuntu 16.04 LTLS, Windows 10
Hors ligne
#2 Le 06/01/2017, à 00:50
- Laurent85
Re : Erreur dans le dmesg, démarrage lent. (résolu)
Tu fais quoi exactement ? démarrer sur le LiveDVD ? parce qu'il y a des message d'erreur venant du lecteur optique.
Hors ligne
#3 Le 06/01/2017, à 18:19
- kloklo28
Re : Erreur dans le dmesg, démarrage lent. (résolu)
Merci Laurent pour ta réponse, je démarrais du DD, mais effectivement je constatais que souvent le DVD était sollicité donc je suis passé de la 14.04 à la 16.04 et je n'ai plus ce problème.
Pour l'instant j'en suis à mettre les compléments tel que les drivers pour l'imprimante en WIFI, killall gnome-software pour avoir accès à certain logiciel.
Un peu déçu car impossible d'avoir Kpatience, seul jeu que j'utilisai.
Je je n'ai pas refait un dmesg et je le joins dans mon prochain message.
Portable ACER Aspire7750G Carte Radéon HD Intel Core i3-2230M CPU2.0GHz x 4 64 bits ubuntu16.04 LTLS, Windows 7
Portable HP Pavilion dv7 Intellronlake Intel Core i5 CPU M430 2.27 GHz x 4 64 bits ubuntu 16.04 LTLS, Windows 10
Hors ligne
#4 Le 06/01/2017, à 18:33
- kloklo28
Re : Erreur dans le dmesg, démarrage lent. (résolu)
Voilà ce que j'obtiens maintenant, pour moi c'est en parti ?????????? 
kloklo28@kloklo28-Aspire-7750G:~$ sudo -i
[sudo] Mot de passe de kloklo28 :
root@kloklo28-Aspire-7750G:~# dmesg
[ 0.000000] microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-57-generic (buildd@lgw01-54) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #78-Ubuntu SMP Fri Dec 9 23:50:32 UTC 2016 (Ubuntu 4.4.0-57.78-generic 4.4.35)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-57-generic root=UUID=7fae4791-0638-499a-808a-2b364ef950aa ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000af63efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000af63f000-0x00000000af6befff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000af6bf000-0x00000000af7befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000af7bf000-0x00000000af7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000af7ff000-0x00000000af7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000af800000-0x00000000afffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Acer Aspire 7750G/JE70_HR, BIOS V1.13 08/17/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x14f800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0AF800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 base 140000000 mask FF0000000 write-back
[ 0.000000] 7 base 14F800000 mask FFF800000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xaf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] BRK [0x0220a000, 0x0220afff] PGTABLE
[ 0.000000] BRK [0x0220b000, 0x0220bfff] PGTABLE
[ 0.000000] BRK [0x0220c000, 0x0220cfff] PGTABLE
[ 0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
[ 0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x337fe000-0x35bf6fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x00000000AF7FE120 000084 (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 0x00000000AF7FC000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DSDT 0x00000000AF7F0000 008F42 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: FACS 0x00000000AF76D000 000040
[ 0.000000] ACPI: FACS 0x00000000AF76D000 000040
[ 0.000000] ACPI: ASF! 0x00000000AF7FD000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: HPET 0x00000000AF7FB000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: APIC 0x00000000AF7FA000 00008C (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MCFG 0x00000000AF7F9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SLIC 0x00000000AF7EF000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x00000000AF7EE000 000BC2 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: BOOT 0x00000000AF7EC000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASPT 0x00000000AF7E9000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x00000000AF7E8000 00090C (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x00000000AF7E7000 000996 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x00000000AF7E6000 00045F (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x14f7f8000-0x14f7fcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000014f7fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000af63efff]
[ 0.000000] node 0: [mem 0x00000000af7ff000-0x00000000af7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000014f7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000014f7fffff]
[ 0.000000] On node 0 totalpages: 1043932
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11161 pages used for memmap
[ 0.000000] DMA32 zone: 714304 pages, LIFO batch:31
[ 0.000000] Normal zone: 5088 pages used for memmap
[ 0.000000] Normal zone: 325632 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf63f000-0xaf6befff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf6bf000-0xaf7befff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf7bf000-0xaf7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xafffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[ 0.000000] e820: [mem 0xb0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88014f400000 s98264 r8192 d28712 u262144
[ 0.000000] pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027598
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-57-generic root=UUID=7fae4791-0638-499a-808a-2b364ef950aa ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3987388K/4175728K available (8432K kernel code, 1291K rwdata, 3960K rodata, 1484K init, 1316K bss, 188340K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2195.047 MHz processor
[ 0.000037] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.09 BogoMIPS (lpj=8780188)
[ 0.000040] pid_max: default: 32768 minimum: 301
[ 0.000046] ACPI: Core revision 20150930
[ 0.007274] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.007295] Security Framework initialized
[ 0.007297] Yama: becoming mindful.
[ 0.007314] AppArmor: AppArmor initialized
[ 0.007610] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008515] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008894] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.008900] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.009110] Initializing cgroup subsys io
[ 0.009114] Initializing cgroup subsys memory
[ 0.009121] Initializing cgroup subsys devices
[ 0.009123] Initializing cgroup subsys freezer
[ 0.009125] Initializing cgroup subsys net_cls
[ 0.009127] Initializing cgroup subsys perf_event
[ 0.009130] Initializing cgroup subsys net_prio
[ 0.009133] Initializing cgroup subsys hugetlb
[ 0.009135] Initializing cgroup subsys pids
[ 0.009157] CPU: Physical Processor ID: 0
[ 0.009158] CPU: Processor Core ID: 0
[ 0.009163] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.009164] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.009166] mce: CPU supports 7 MCE banks
[ 0.009178] CPU0: Thermal monitoring enabled (TM1)
[ 0.009186] process: using mwait in idle threads
[ 0.009189] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.009190] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.009642] Freeing SMP alternatives memory: 32K (ffffffff820b7000 - ffffffff820bf000)
[ 0.048513] ftrace: allocating 32063 entries in 126 pages
[ 0.065732] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.065735] smpboot: Max logical packages: 4
[ 0.065811] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.066267] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.105956] TSC deadline timer enabled
[ 0.105960] smpboot: CPU0: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.105976] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.105999] ... version: 3
[ 0.106000] ... bit width: 48
[ 0.106001] ... generic registers: 4
[ 0.106002] ... value mask: 0000ffffffffffff
[ 0.106004] ... max period: 0000ffffffffffff
[ 0.106005] ... fixed-purpose events: 3
[ 0.106006] ... event mask: 000000070000000f
[ 0.106890] x86: Booting SMP configuration:
[ 0.106892] .... node #0, CPUs: #1
[ 0.109378] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.109467] #2
[ 0.110188] microcode: CPU2 microcode updated early to revision 0x29, date = 2013-06-12
[ 0.112354] #3
[ 0.114693] x86: Booted up 1 node, 4 CPUs
[ 0.114697] smpboot: Total of 4 processors activated (17560.37 BogoMIPS)
[ 0.118150] devtmpfs: initialized
[ 0.120655] evm: security.selinux
[ 0.120656] evm: security.SMACK64
[ 0.120657] evm: security.SMACK64EXEC
[ 0.120658] evm: security.SMACK64TRANSMUTE
[ 0.120659] evm: security.SMACK64MMAP
[ 0.120660] evm: security.ima
[ 0.120661] evm: security.capability
[ 0.120734] PM: Registering ACPI NVS region [mem 0xaf6bf000-0xaf7befff] (1048576 bytes)
[ 0.120833] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.120926] pinctrl core: initialized pinctrl subsystem
[ 0.121054] RTC time: 16:24:33, date: 01/06/17
[ 0.121178] NET: Registered protocol family 16
[ 0.130700] cpuidle: using governor ladder
[ 0.142705] cpuidle: using governor menu
[ 0.142714] PCCT header not found.
[ 0.142830] Simple Boot Flag at 0x44 set to 0x1
[ 0.142886] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.142888] ACPI: bus type PCI registered
[ 0.142890] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.142974] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.142976] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.142989] PCI: Using configuration type 1 for base access
[ 0.143027] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.159183] ACPI: Added _OSI(Module Device)
[ 0.159185] ACPI: Added _OSI(Processor Device)
[ 0.159186] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.159187] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.161696] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.164198] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.164511] ACPI: Dynamic OEM Table Load:
[ 0.164519] ACPI: SSDT 0xFFFF880149F42000 00067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.165048] ACPI: Dynamic OEM Table Load:
[ 0.165054] ACPI: SSDT 0xFFFF880149F52C00 000303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.165502] ACPI: Dynamic OEM Table Load:
[ 0.165506] ACPI: SSDT 0xFFFF880149F37E00 000119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.166330] ACPI : EC: EC started
[ 0.170845] ACPI: Interpreter enabled
[ 0.170898] ACPI: (supports S0 S3 S4 S5)
[ 0.170900] ACPI: Using IOAPIC for interrupt routing
[ 0.170928] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.270596] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.270603] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.270637] \_SB_.PCI0:_OSC invalid UUID
[ 0.270638] _OSC request data:1 1f 0
[ 0.270642] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.271091] PCI host bridge to bus 0000:00
[ 0.271095] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.271097] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.271099] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.271101] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff window]
[ 0.271103] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.271111] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.271207] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.271241] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.271282] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.271376] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.271425] pci 0000:00:16.0: reg 0x10: [mem 0xc1304000-0xc130400f 64bit]
[ 0.271522] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.271624] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.272008] pci 0000:00:1a.0: reg 0x10: [mem 0xc130a000-0xc130a3ff]
[ 0.274100] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.274197] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.274245] pci 0000:00:1b.0: reg 0x10: [mem 0xc1300000-0xc1303fff 64bit]
[ 0.274356] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.274409] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.274455] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.274580] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.274633] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.274680] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.274803] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.274905] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.275029] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.275083] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.275137] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.275510] pci 0000:00:1d.0: reg 0x10: [mem 0xc1309000-0xc13093ff]
[ 0.277601] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.277664] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.277710] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.277934] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.277981] pci 0000:00:1f.2: reg 0x10: [io 0x4048-0x404f]
[ 0.277995] pci 0000:00:1f.2: reg 0x14: [io 0x405c-0x405f]
[ 0.278008] pci 0000:00:1f.2: reg 0x18: [io 0x4040-0x4047]
[ 0.278022] pci 0000:00:1f.2: reg 0x1c: [io 0x4058-0x405b]
[ 0.278034] pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f]
[ 0.278048] pci 0000:00:1f.2: reg 0x24: [mem 0xc1308000-0xc13087ff]
[ 0.278108] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.278194] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.278223] pci 0000:00:1f.3: reg 0x10: [mem 0xc1306000-0xc13060ff 64bit]
[ 0.278261] pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f]
[ 0.278414] pci 0000:01:00.0: [1002:6741] type 00 class 0x030000
[ 0.278456] pci 0000:01:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.278473] pci 0000:01:00.0: reg 0x18: [mem 0xc0300000-0xc031ffff 64bit]
[ 0.278485] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
[ 0.278506] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.278551] pci 0000:01:00.0: supports D1 D2
[ 0.278582] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.278629] pci 0000:01:00.1: [1002:aa90] type 00 class 0x040300
[ 0.278670] pci 0000:01:00.1: reg 0x10: [mem 0xc0320000-0xc0323fff 64bit]
[ 0.278763] pci 0000:01:00.1: supports D1 D2
[ 0.286858] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.286866] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.286873] pci 0000:00:01.0: bridge window [mem 0xc0300000-0xc12fffff]
[ 0.286882] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.287031] pci 0000:02:00.0: [1969:1083] type 00 class 0x020000
[ 0.287101] pci 0000:02:00.0: reg 0x10: [mem 0xc0200000-0xc023ffff 64bit]
[ 0.287119] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f]
[ 0.287263] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.287314] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.294868] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.294878] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.294887] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc02fffff]
[ 0.295072] pci 0000:03:00.0: [14e4:4358] type 00 class 0x028000
[ 0.295144] pci 0000:03:00.0: reg 0x10: [mem 0xc0100000-0xc0103fff 64bit]
[ 0.295324] pci 0000:03:00.0: supports D1 D2
[ 0.295326] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.295385] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.302904] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.302919] pci 0000:00:1c.1: bridge window [mem 0xc0100000-0xc01fffff]
[ 0.303080] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.303207] pci 0000:05:00.0: reg 0x10: [mem 0xc0000000-0xc0001fff 64bit]
[ 0.303505] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.303592] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.310892] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.310906] pci 0000:00:1c.3: bridge window [mem 0xc0000000-0xc00fffff]
[ 0.359239] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.359295] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.359348] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.359402] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.359454] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.359507] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.359559] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.359611] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.359707] ACPI: Enabled 9 GPEs in block 00 to 3F
[ 0.359754] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.359871] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.359874] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.359875] vgaarb: loaded
[ 0.359877] vgaarb: bridge control possible 0000:01:00.0
[ 0.360138] SCSI subsystem initialized
[ 0.360184] libata version 3.00 loaded.
[ 0.360212] ACPI: bus type USB registered
[ 0.360229] usbcore: registered new interface driver usbfs
[ 0.360237] usbcore: registered new interface driver hub
[ 0.360258] usbcore: registered new device driver usb
[ 0.360404] PCI: Using ACPI for IRQ routing
[ 0.373815] PCI: pci_cache_line_size set to 64 bytes
[ 0.373913] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.373915] e820: reserve RAM buffer [mem 0xaf63f000-0xafffffff]
[ 0.373917] e820: reserve RAM buffer [mem 0xaf800000-0xafffffff]
[ 0.373918] e820: reserve RAM buffer [mem 0x14f800000-0x14fffffff]
[ 0.374048] NetLabel: Initializing
[ 0.374049] NetLabel: domain hash size = 128
[ 0.374050] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.374063] NetLabel: unlabeled traffic allowed by default
[ 0.374149] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.374155] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.376171] amd_nb: Cannot enumerate AMD northbridges
[ 0.376185] clocksource: Switched to clocksource hpet
[ 0.382430] AppArmor: AppArmor Filesystem Enabled
[ 0.382505] pnp: PnP ACPI init
[ 0.382644] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.382647] system 00:00: [io 0xff2c-0xff2f] has been reserved
[ 0.382649] system 00:00: [io 0x1000-0x100f] has been reserved
[ 0.382651] system 00:00: [io 0xffff] has been reserved
[ 0.382653] system 00:00: [io 0xffff] has been reserved
[ 0.382656] system 00:00: [io 0x0400-0x047f] could not be reserved
[ 0.382658] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.382660] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.382664] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.382695] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.382744] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.382747] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.382784] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.382843] pnp 00:04: Plug and Play ACPI device, IDs SYN1b16 SYN1b00 SYN0002 PNP0f13 (active)
[ 0.428440] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.428443] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.428445] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.428447] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.428449] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.428451] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.428453] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.428455] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.428457] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.428460] system 00:05: [mem 0xc1400000-0xc1400fff] has been reserved
[ 0.428463] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.428667] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.428669] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.428672] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.428688] pnp: PnP ACPI: found 7 devices
[ 0.435422] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.435430] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[ 0.435476] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0340000-0xc035ffff pref]
[ 0.435478] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.435481] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.435484] pci 0000:00:01.0: bridge window [mem 0xc0300000-0xc12fffff]
[ 0.435487] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.435491] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.435494] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.435501] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc02fffff]
[ 0.435513] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.435520] pci 0000:00:1c.1: bridge window [mem 0xc0100000-0xc01fffff]
[ 0.435532] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.435539] pci 0000:00:1c.3: bridge window [mem 0xc0000000-0xc00fffff]
[ 0.435552] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.435554] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.435556] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.435558] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff window]
[ 0.435560] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.435562] pci_bus 0000:01: resource 1 [mem 0xc0300000-0xc12fffff]
[ 0.435564] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.435566] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.435567] pci_bus 0000:02: resource 1 [mem 0xc0200000-0xc02fffff]
[ 0.435569] pci_bus 0000:03: resource 1 [mem 0xc0100000-0xc01fffff]
[ 0.435571] pci_bus 0000:05: resource 1 [mem 0xc0000000-0xc00fffff]
[ 0.435607] NET: Registered protocol family 2
[ 0.435775] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.435851] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.435920] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.435945] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.435962] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.436014] NET: Registered protocol family 1
[ 0.468382] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.476956] PCI: CLS 64 bytes, default 64
[ 0.477006] Trying to unpack rootfs image as initramfs...
[ 1.116081] Freeing initrd memory: 36836K (ffff8800337fe000 - ffff880035bf7000)
[ 1.116105] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.116107] software IO TLB [mem 0xab63f000-0xaf63f000] (64MB) mapped at [ffff8800ab63f000-ffff8800af63efff]
[ 1.116209] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 1.116211] hw unit of domain pp0-core 2^-16 Joules
[ 1.116212] hw unit of domain package 2^-16 Joules
[ 1.116213] hw unit of domain pp1-gpu 2^-16 Joules
[ 1.116313] Scanning for low memory corruption every 60 seconds
[ 1.116750] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.116788] audit: initializing netlink subsys (disabled)
[ 1.116807] audit: type=2000 audit(1483719874.080:1): initialized
[ 1.117212] Initialise system trusted keyring
[ 1.117328] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.118944] zbud: loaded
[ 1.119166] VFS: Disk quotas dquot_6.6.0
[ 1.119205] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.119486] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.119740] fuse init (API version 7.23)
[ 1.119890] Key type big_key registered
[ 1.119912] Allocating IMA MOK and blacklist keyrings.
[ 1.120362] Key type asymmetric registered
[ 1.120367] Asymmetric key parser 'x509' registered
[ 1.120411] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.120445] io scheduler noop registered
[ 1.120449] io scheduler deadline registered (default)
[ 1.120484] io scheduler cfq registered
[ 1.121076] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.121083] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.121111] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[ 1.121112] vesafb: scrolling: redraw
[ 1.121114] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.121124] pmd_set_huge: Cannot satisfy [mem 0xb0000000-0xb0200000] with a huge-page mapping due to MTRR override.
[ 1.121138] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90000800000, using 5632k, total 5632k
[ 1.121241] Console: switching to colour frame buffer device 200x56
[ 1.121264] fb0: VESA VGA frame buffer device
[ 1.121280] intel_idle: MWAIT substates: 0x21120
[ 1.121282] intel_idle: v0.4.1 model 0x2A
[ 1.121283] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.328393] ACPI: AC Adapter [ACAD] (on-line)
[ 1.328485] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[ 1.328490] ACPI: Power Button [PWRB]
[ 1.328531] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input1
[ 1.328565] ACPI: Lid Switch [LID0]
[ 1.328603] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input2
[ 1.328605] ACPI: Sleep Button [SLPB]
[ 1.328646] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.328648] ACPI: Power Button [PWRF]
[ 1.329146] GHES: HEST is not enabled!
[ 1.329399] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.688209] ACPI: Battery Slot [BAT0] (battery present)
[ 1.688393] Linux agpgart interface v0.103
[ 1.691401] brd: module loaded
[ 1.692809] loop: module loaded
[ 1.693048] libphy: Fixed MDIO Bus: probed
[ 1.693053] tun: Universal TUN/TAP device driver, 1.6
[ 1.693054] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.693107] PPP generic driver version 2.4.2
[ 1.693179] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.693185] ehci-pci: EHCI PCI platform driver
[ 1.693320] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.693327] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.693343] ehci-pci 0000:00:1a.0: debug port 2
[ 1.697263] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.697276] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc130a000
[ 1.708186] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.708235] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.708238] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.708239] usb usb1: Product: EHCI Host Controller
[ 1.708241] usb usb1: Manufacturer: Linux 4.4.0-57-generic ehci_hcd
[ 1.708243] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.708371] hub 1-0:1.0: USB hub found
[ 1.708379] hub 1-0:1.0: 2 ports detected
[ 1.708578] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.708583] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.708598] ehci-pci 0000:00:1d.0: debug port 2
[ 1.712490] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.712501] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1309000
[ 1.724182] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.724221] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.724223] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.724225] usb usb2: Product: EHCI Host Controller
[ 1.724227] usb usb2: Manufacturer: Linux 4.4.0-57-generic ehci_hcd
[ 1.724228] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.724347] hub 2-0:1.0: USB hub found
[ 1.724352] hub 2-0:1.0: 2 ports detected
[ 1.724457] ehci-platform: EHCI generic platform driver
[ 1.724473] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.724478] ohci-pci: OHCI PCI platform driver
[ 1.724491] ohci-platform: OHCI generic platform driver
[ 1.724501] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.724587] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1.724592] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[ 1.724788] xhci_hcd 0000:05:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
[ 1.724993] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.724995] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.724997] usb usb3: Product: xHCI Host Controller
[ 1.724999] usb usb3: Manufacturer: Linux 4.4.0-57-generic xhci-hcd
[ 1.725000] usb usb3: SerialNumber: 0000:05:00.0
[ 1.725114] hub 3-0:1.0: USB hub found
[ 1.725126] hub 3-0:1.0: 2 ports detected
[ 1.725221] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1.725225] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[ 1.728203] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.728220] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.728222] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.728223] usb usb4: Product: xHCI Host Controller
[ 1.728225] usb usb4: Manufacturer: Linux 4.4.0-57-generic xhci-hcd
[ 1.728227] usb usb4: SerialNumber: 0000:05:00.0
[ 1.728335] hub 4-0:1.0: USB hub found
[ 1.728346] hub 4-0:1.0: 2 ports detected
[ 1.728487] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 1.788927] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.788933] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.789086] mousedev: PS/2 mouse device common for all mice
[ 1.789287] rtc_cmos 00:01: RTC can wake from S4
[ 1.789471] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.789505] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.789514] i2c /dev entries driver
[ 1.789571] device-mapper: uevent: version 1.0.3
[ 1.789650] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.789667] Intel P-state driver initializing.
[ 1.791796] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.792764] NET: Registered protocol family 10
[ 1.793270] NET: Registered protocol family 17
[ 1.793314] Key type dns_resolver registered
[ 1.793849] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[ 1.793870] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[ 1.793884] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[ 1.793905] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[ 1.794010] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.794408] registered taskstats version 1
[ 1.794464] Loading compiled-in X.509 certificates
[ 1.796720] Loaded X.509 cert 'Build time autogenerated kernel key: a2268f7e4ca1e818c997a5071614f42c2a90855b'
[ 1.796741] zswap: loaded using pool lzo/zbud
[ 1.798822] Key type trusted registered
[ 1.802474] Key type encrypted registered
[ 1.802483] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.802487] ima: No TPM chip found, activating TPM-bypass!
[ 1.802507] evm: HMAC attrs: 0x1
[ 1.802915] Magic number: 1:490:438
[ 1.803024] rtc_cmos 00:01: setting system clock to 2017-01-06 16:24:35 UTC (1483719875)
[ 1.803087] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.803090] EDD information not available.
[ 1.803169] PM: Hibernation image not present or could not be loaded.
[ 1.804662] Freeing unused kernel memory: 1484K (ffffffff81f44000 - ffffffff820b7000)
[ 1.804665] Write protecting the kernel read-only data: 14336k
[ 1.805203] Freeing unused kernel memory: 1796K (ffff88000183f000 - ffff880001a00000)
[ 1.805574] Freeing unused kernel memory: 136K (ffff880001dde000 - ffff880001e00000)
[ 1.815957] random: systemd-udevd: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
[ 1.816041] random: systemd-udevd: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
[ 1.816058] random: systemd-udevd: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
[ 1.816601] random: udevadm: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
[ 1.816652] random: udevadm: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
[ 1.816924] random: udevadm: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
[ 1.816985] random: udevadm: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
[ 1.817043] random: udevadm: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
[ 1.817098] random: udevadm: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
[ 1.817163] random: udevadm: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
[ 1.854137] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.020276] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.036272] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.036317] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[ 2.051594] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 2.052031] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 2.054262] wmi: Mapper loaded
[ 2.116275] tsc: Refined TSC clocksource calibration: 2195.017 MHz
[ 2.116287] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cf9c5dc, max_idle_ns: 440795212634 ns
[ 2.152738] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.152743] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.152990] hub 1-1:1.0: USB hub found
[ 2.153064] hub 1-1:1.0: 6 ports detected
[ 2.168643] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.168654] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.168994] hub 2-1:1.0: USB hub found
[ 2.169063] hub 2-1:1.0: 6 ports detected
[ 2.190373] usb 3-2: New USB device found, idVendor=4168, idProduct=1012
[ 2.190384] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.190391] usb 3-2: Product: Targus Wireless Mouse
[ 2.190396] usb 3-2: Manufacturer: reserved
[ 2.196241] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.207586] usbcore: registered new interface driver usbhid
[ 2.207589] usbhid: USB HID core driver
[ 2.209504] input: reserved Targus Wireless Mouse as /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb3/3-2/3-2:1.0/0003:4168:1012.0001/input/input6
[ 2.209700] hid-generic 0003:4168:1012.0001: input,hiddev0,hidraw0: USB HID v1.11 Mouse [reserved Targus Wireless Mouse] on usb-0000:05:00.0-2/input0
[ 2.256747] acpi device:35: registered as cooling_device4
[ 2.256840] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:34/LNXVIDEO:01/input/input7
[ 2.256942] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 2.273772] [drm] Initialized drm 1.1.0 20060810
[ 2.275461] ahci 0000:00:1f.2: version 3.0
[ 2.275876] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.275913] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 2.275918] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[ 2.286077] scsi host0: ahci
[ 2.288347] scsi host1: ahci
[ 2.292051] scsi host2: ahci
[ 2.296231] scsi host3: ahci
[ 2.296356] scsi host4: ahci
[ 2.305556] atl1c 0000:02:00.0: version 1.0.1.1-NAPI
[ 2.312189] scsi host5: ahci
[ 2.312261] ata1: SATA max UDMA/133 abar m2048@0xc1308000 port 0xc1308100 irq 30
[ 2.312263] ata2: DUMMY
[ 2.312267] ata3: SATA max UDMA/133 abar m2048@0xc1308000 port 0xc1308200 irq 30
[ 2.312268] ata4: DUMMY
[ 2.312269] ata5: DUMMY
[ 2.312270] ata6: DUMMY
[ 2.323352] atl1c 0000:02:00.0 enp2s0: renamed from eth0
[ 2.334401] [drm] radeon kernel modesetting enabled.
[ 2.336893] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 2.336896] AMD IOMMUv2 functionality not available on this system
[ 2.340642] CRAT table not found
[ 2.340645] Finished initializing topology ret=0
[ 2.340700] kfd kfd: Initialized module
[ 2.340933] checking generic (b0000000 580000) vs hw (b0000000 10000000)
[ 2.340936] fb: switching to radeondrmfb from VESA VGA
[ 2.340965] Console: switching to colour dummy device 80x25
[ 2.341387] [drm] initializing kernel modesetting (TURKS 0x1002:0x6741 0x1025:0x050E).
[ 2.341402] [drm] register mmio base: 0xC0300000
[ 2.341404] [drm] register mmio size: 131072
[ 2.341464] ATOM BIOS: Acer
[ 2.341655] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 2.341660] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 2.341663] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 2.341665] [drm] RAM width 128bits DDR
[ 2.341720] [TTM] Zone kernel: Available graphics memory: 2013836 kiB
[ 2.341722] [TTM] Initializing pool allocator
[ 2.341729] [TTM] Initializing DMA pool allocator
[ 2.341751] [drm] radeon: 1024M of VRAM memory ready
[ 2.341753] [drm] radeon: 1024M of GTT memory ready.
[ 2.341770] [drm] Loading TURKS Microcode
[ 2.341866] [drm] Internal thermal controller with fan control
[ 2.346386] [drm] radeon: dpm initialized
[ 2.346483] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 2.347278] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 2.366256] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 2.366383] radeon 0000:01:00.0: WB enabled
[ 2.366386] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880147132c00
[ 2.366388] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880147132c0c
[ 2.367839] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001032118
[ 2.367841] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.367842] [drm] Driver supports precise vblank timestamp query.
[ 2.367844] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 2.367889] radeon 0000:01:00.0: radeon: using MSI.
[ 2.367936] [drm] radeon: irq initialized.
[ 2.384511] [drm] ring test on 0 succeeded in 2 usecs
[ 2.384526] [drm] ring test on 3 succeeded in 9 usecs
[ 2.424183] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 2.560464] [drm] ring test on 5 succeeded in 2 usecs
[ 2.560475] [drm] UVD initialized successfully.
[ 2.560762] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.560816] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.570709] usb 1-1.3: New USB device found, idVendor=064e, idProduct=d20c
[ 2.570713] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.570715] usb 1-1.3: Product: 1.3M HD WebCam
[ 2.570717] usb 1-1.3: Manufacturer: SuYin
[ 2.570718] usb 1-1.3: SerialNumber: HF2015-A821-OV01-VA-R01.01.01
[ 2.640185] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.641353] ata1.00: ATA-9: SanDisk Ultra II 240GB, X41100RL, max UDMA/133
[ 2.641357] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.642549] ata1.00: configured for UDMA/133
[ 2.642743] scsi 0:0:0:0: Direct-Access ATA SanDisk Ultra II 00RL PQ: 0 ANSI: 5
[ 2.643027] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.643153] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 2.643260] sd 0:0:0:0: [sda] Write Protect is off
[ 2.643264] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.643299] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.644365] sda: sda1 sda2 < sda5 >
[ 2.644757] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.651608] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[ 2.758045] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0138
[ 2.758049] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.758051] usb 1-1.4: Product: USB2.0-CRW
[ 2.758053] usb 1-1.4: Manufacturer: Generic
[ 2.758055] usb 1-1.4: SerialNumber: 20090516388200000
[ 2.767745] usbcore: registered new interface driver usb-storage
[ 2.769383] usbcore: registered new interface driver uas
[ 2.770886] ums-realtek 1-1.4:1.0: USB Mass Storage device detected
[ 2.790021] scsi host6: usb-storage 1-1.4:1.0
[ 2.790132] usbcore: registered new interface driver ums-realtek
[ 2.960279] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.962088] ata3.00: ATAPI: MATSHITADVD-RAM UJ8B0, 1.00, max UDMA/100
[ 2.964344] ata3.00: configured for UDMA/100
[ 2.968315] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8B0 1.00 PQ: 0 ANSI: 5
[ 2.978731] usb 1-1.4: USB disconnect, device number 4
[ 2.985752] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.985756] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.985963] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.986197] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 3.116487] clocksource: Switched to clocksource tsc
[ 3.208264] [drm] ib test on ring 5 succeeded
[ 3.272185] [drm] radeon atom DIG backlight initialized
[ 3.272189] [drm] Radeon Display Connectors
[ 3.272190] [drm] Connector 0:
[ 3.272191] [drm] LVDS-1
[ 3.272193] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 3.272194] [drm] Encoders:
[ 3.272195] [drm] LCD1: INTERNAL_UNIPHY
[ 3.272196] [drm] Connector 1:
[ 3.272197] [drm] HDMI-A-1
[ 3.272198] [drm] HPD1
[ 3.272200] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 3.272201] [drm] Encoders:
[ 3.272202] [drm] DFP1: INTERNAL_UNIPHY1
[ 3.272203] [drm] Connector 2:
[ 3.272203] [drm] VGA-1
[ 3.272205] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 3.272206] [drm] Encoders:
[ 3.272207] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.188074] psmouse serio1: synaptics: queried max coordinates: x [..5774], y [..5022]
[ 4.422842] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1694, fw id: 705179
[ 4.572388] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 4.953589] [drm] fb mappable at 0xB0475000
[ 4.953592] [drm] vram apper at 0xB0000000
[ 4.953594] [drm] size 5787648
[ 4.953595] [drm] fb depth is 24
[ 4.953596] [drm] pitch is 6400
[ 4.953687] fbcon: radeondrmfb (fb0) is primary device
[ 4.953762] Console: switching to colour frame buffer device 200x56
[ 4.953788] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 5.380374] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[ 5.429383] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.519076] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 5.519212] systemd[1]: Detected architecture x86-64.
[ 5.519503] systemd[1]: Set hostname to <kloklo28-Aspire-7750G>.
[ 5.588589] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.588674] systemd[1]: Listening on Journal Socket.
[ 5.588690] systemd[1]: Reached target Encrypted Volumes.
[ 5.588757] systemd[1]: Listening on Journal Audit Socket.
[ 5.588797] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.588821] systemd[1]: Listening on udev Kernel Socket.
[ 5.588848] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.588871] systemd[1]: Listening on Syslog Socket.
[ 5.588899] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.588910] systemd[1]: Reached target User and Group Name Lookups.
[ 5.589002] systemd[1]: Created slice System Slice.
[ 5.604369] systemd[1]: Mounting Debug File System...
[ 5.604958] systemd[1]: Mounting Huge Pages File System...
[ 5.605618] systemd[1]: Starting Set console keymap...
[ 5.606435] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.609332] systemd[1]: Starting Load Kernel Modules...
[ 5.609826] systemd[1]: Starting Uncomplicated firewall...
[ 5.610623] systemd[1]: Started Read required files in advance.
[ 5.611495] systemd[1]: Started Braille Device Support.
[ 5.611614] systemd[1]: Reached target Remote File Systems (Pre).
[ 5.611751] systemd[1]: Created slice User and Session Slice.
[ 5.612022] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.615008] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.615065] systemd[1]: Reached target Remote File Systems.
[ 5.615105] systemd[1]: Reached target Slices.
[ 5.615806] systemd[1]: Starting Journal Service...
[ 5.615893] systemd[1]: Listening on udev Control Socket.
[ 5.619270] systemd[1]: Mounted Debug File System.
[ 5.619315] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.619740] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 5.622746] systemd[1]: Mounted Huge Pages File System.
[ 5.623308] systemd[1]: Started Uncomplicated firewall.
[ 5.630228] lp: driver loaded but no devices found
[ 5.636074] ppdev: user-space parallel port driver
[ 5.642809] systemd[1]: Started Load Kernel Modules.
[ 5.667505] systemd[1]: Started Set console keymap.
[ 5.692393] systemd[1]: Starting Apply Kernel Variables...
[ 5.693110] systemd[1]: Mounting FUSE Control File System...
[ 5.694219] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.697651] systemd[1]: Mounted FUSE Control File System.
[ 5.698033] systemd[1]: Started Journal Service.
[ 5.765476] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 5.817438] systemd-journald[262]: Received request to flush runtime journal from PID 1
[ 5.931202] audit: type=1400 audit(1483719879.621:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=472 comm="apparmor_parser"
[ 5.933525] audit: type=1400 audit(1483719879.625:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=469 comm="apparmor_parser"
[ 5.933537] audit: type=1400 audit(1483719879.625:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=469 comm="apparmor_parser"
[ 5.933546] audit: type=1400 audit(1483719879.625:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=469 comm="apparmor_parser"
[ 5.933555] audit: type=1400 audit(1483719879.625:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=469 comm="apparmor_parser"
[ 5.935939] audit: type=1400 audit(1483719879.625:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=474 comm="apparmor_parser"
[ 5.935952] audit: type=1400 audit(1483719879.625:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=474 comm="apparmor_parser"
[ 5.936610] audit: type=1400 audit(1483719879.629:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=468 comm="apparmor_parser"
[ 5.936625] audit: type=1400 audit(1483719879.629:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=468 comm="apparmor_parser"
[ 6.011893] random: nonblocking pool is initialized
[ 6.422629] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.482093] media: Linux media interface: v0.10
[ 6.491298] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[ 6.491307] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.491313] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 6.491318] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.491321] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 6.491325] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.491327] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 6.491331] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.491333] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.492189] Linux video capture interface: v2.00
[ 6.496551] wl: module license 'MIXED/Proprietary' taints kernel.
[ 6.496556] Disabling lock debugging due to kernel taint
[ 6.499283] wl: module verification failed: signature and/or required key missing - tainting kernel
[ 6.516856] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (064e:d20c)
[ 6.519973] input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input9
[ 6.520049] usbcore: registered new interface driver uvcvideo
[ 6.520051] USB Video Class driver (1.1.1)
[ 6.547470] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 6.559549] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 6.570012] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x598301f0
[ 6.570592] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 6.570596] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.570599] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 6.570602] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.570605] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.570608] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x1b
[ 6.570611] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 6.582928] wlan0: Broadcom BCM4358 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
[ 6.729749] intel_rapl: Found RAPL domain package
[ 6.729754] intel_rapl: Found RAPL domain core
[ 6.729762] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 6.864709] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 6.864725] acer_wmi: Function bitmap for Communication Button: 0x1
[ 6.867671] input: Acer WMI hotkeys as /devices/virtual/input/input11
[ 6.868051] input: Acer BMA150 accelerometer as /devices/virtual/input/input12
[ 6.871229] wl 0000:03:00.0 wlp3s0: renamed from wlan0
[ 6.880284] cfg80211: World regulatory domain updated:
[ 6.880288] cfg80211: DFS Master region: unset
[ 6.880290] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6.880294] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.880297] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.880299] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.880303] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 6.880306] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 6.880309] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 6.880311] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.880314] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 7.031520] Adding 4173820k swap on /dev/sda5. Priority:-1 extents:1 across:4173820k SSFS
[ 7.583907] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 7.583980] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 13.912382] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 13.918465] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 13.919232] atl1c 0000:02:00.0: atl1c: enp2s0 NIC Link is Up<1000 Mbps Full Duplex>Portable ACER Aspire7750G Carte Radéon HD Intel Core i3-2230M CPU2.0GHz x 4 64 bits ubuntu16.04 LTLS, Windows 7
Portable HP Pavilion dv7 Intellronlake Intel Core i5 CPU M430 2.27 GHz x 4 64 bits ubuntu 16.04 LTLS, Windows 10
Hors ligne
#5 Le 06/01/2017, à 23:38
- Laurent85
Re : Erreur dans le dmesg, démarrage lent. (résolu)
kloklo28 a écrit :
Un peu déçu car impossible d'avoir Kpatience, seul jeu que j'utilisai.
Je je n'ai pas refait un dmesg et je le joins dans mon prochain message.
S'il y avait un dvd dans le lecteur c'était le problème je pense.
Kpatience, il est disponible ce jeu dans 16.04, installe le paquet kpat.
Dernière modification par Laurent85 (Le 06/01/2017, à 23:38)
Hors ligne
#6 Le 08/01/2017, à 22:51
- kloklo28
Re : Erreur dans le dmesg, démarrage lent. (résolu)
Hello Laurent85
Je suis à la recherche d'un problème plus complexe et peut-être de compatibilité, car en fait je n'ai plus accès à la logitèque Ubuntu et qu'à certaine appli par Synaptic.
Après divers commande du style sudo apt-get install aptitude.......
En fait j'avais des fichiers qui étaient corrompus puis une réinstallation software-center. effectivement j'ai bien Kpatience.
Dernière modification par kloklo28 (Le 09/01/2017, à 10:31)
Portable ACER Aspire7750G Carte Radéon HD Intel Core i3-2230M CPU2.0GHz x 4 64 bits ubuntu16.04 LTLS, Windows 7
Portable HP Pavilion dv7 Intellronlake Intel Core i5 CPU M430 2.27 GHz x 4 64 bits ubuntu 16.04 LTLS, Windows 10
Hors ligne
Pages : 1