#1 Le 11/01/2017, à 14:12
- loixou29
[Résolu] dpkg - grub/IDL - problèmes de dépendance
Bonjour à tous,
Je crée une autre discussion sur un sujet très semblable à ma précédente requête (ici). J'espère que cela ne pose pas de soucis à la communauté; je le fais par un soucis de clarté.
Depuis que j'ai installé IDL (logiciel de Harris) sur mon système Ubuntu 16.04LTS 64x (4.4.0-57-generic) fraîchement ré-installé en double-boot, je rencontre des problèmes de dépendance au niveau de grub. Cela se manifeste lorsque je fais un upgrade:
loic@loic-S301LP:~$ sudo apt-get upgrade
[sudo] Mot de passe de loic :
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Calcul de la mise à jour... Fait
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
5 partiellement installés ou enlevés.
Après cette opération, 0 o d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] o
Paramétrage de grub-common (2.02~beta2-36ubuntu3.6) ...
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
insserv: warning: script 'K01sys5_idl_lmgrd' missing LSB tags and overrides
insserv: warning: script 'sys5_idl_lmgrd' missing LSB tags and overrides
insserv: There is a loop at service plymouth if started
insserv: There is a loop between service plymouth and procps if started
insserv: loop involving service procps at depth 2
insserv: loop involving service udev at depth 1
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Max recursions depth 99 reached
insserv: loop involving service bluetooth at depth 1
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: There is a loop between service sys5_idl_lmgrd and hwclock if started
insserv: loop involving service hwclock at depth 1
insserv: There is a loop at service sys5_idl_lmgrd if started
insserv: There is a loop between service plymouth and urandom if started
insserv: loop involving service urandom at depth 4
insserv: loop involving service mountdevsubfs at depth 2
insserv: There is a loop between service sys5_idl_lmgrd and udev if started
insserv: loop involving service mountkernfs at depth 1
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: loop involving service checkroot at depth 4
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: There is a loop between service sys5_idl_lmgrd and dns-clean if started
insserv: loop involving service dns-clean at depth 1
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: exiting now without changing boot order!
update-rc.d: error: insserv rejected the script header
dpkg: erreur de traitement du paquet grub-common (--configure) :
le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1
dpkg: des problèmes de dépendances empêchent la configuration de grub2-common :
grub2-common dépend de grub-common (= 2.02~beta2-36ubuntu3.6) ; cependant :
Le paquet grub-common n'est pas encore configuré.
dpkg: erreur de traitement du paquet grub2-common (--configure) :
problèmes de dépendances - laissé non configuré
dpkg: des problèmes de dépendances empêchent la configuration de grub-efi-amd64-bin :
grub-efi-amd64-bin dépend de grub-common (= 2.02~beta2-36ubuntu3.6) ; cependant :
Le paquet grub-common n'est pas encore configuré.
dpkg: erreur de traitement du paquet grub-efi-amd64-bin (--configure) :
problèmes de dépendances - laissé non configuré
dpkg: des problèmes de dépendances empêchent la configuration de grub-efi-amd64 :
grub-efi-amd64 dépend de grub-common (= 2.02~beta2-36ubuntu3.6) ; cependant :
Le paquet grub-common n'est pas encore configuré.
grub-efi-amd64 dépend de grub2-common (= 2.02~beta2-36ubuntu3.6) ; cependant :
Le paquet grAucun rapport « apport » n'a été créé car le message d'erreur indique une erreur consécutive à un échec précédent.
Aucun rapport « apport » n'a été créé car le message d'erreur indique une erreur consécutive à un échec précédent.
Aucun rapport « apport » écrit car MaxReports a déjà été atteint
Aucun rapport « apport » écrit car MaxReports a déjà été atteint
ub2-common n'est pas encore configuré.
grub-efi-amd64 dépend de grub-efi-amd64-bin (= 2.02~beta2-36ubuntu3.6) ; cependant :
Le paquet grub-efi-amd64-bin n'est pas encore configuré.
dpkg: erreur de traitement du paquet grub-efi-amd64 (--configure) :
problèmes de dépendances - laissé non configuré
dpkg: des problèmes de dépendances empêchent la configuration de grub-efi :
grub-efi dépend de grub-common (= 2.02~beta2-36ubuntu3.6) ; cependant :
Le paquet grub-common n'est pas encore configuré.
grub-efi dépend de grub-efi-amd64 (= 2.02~beta2-36ubuntu3.6) ; cependant :
Le paquet grub-efi-amd64 n'est pas encore configuré.
dpkg: erreur de traitement du paquet grub-efi (--configure) :
problèmes de dépendances - laissé non configuré
Des erreurs ont été rencontrées pendant l'exécution :
grub-common
grub2-common
grub-efi-amd64-bin
grub-efi-amd64
grub-efi
E: Sub-process /usr/bin/dpkg returned an error code (1)Nous pouvons voir que ces paquets sont non configurés... Bien qu'ils le soient avant que j'installe IDL. J'ai essayé de désinstaller grub et de le remettre, sans grand succès.
Avez-vous des idées?
Je vous remercie,
Loïc
Dernière modification par loixou29 (Le 12/01/2017, à 18:25)
Hors ligne
#2 Le 11/01/2017, à 15:04
- xabilon
Re : [Résolu] dpkg - grub/IDL - problèmes de dépendance
Salut
C'est quoi cet "IDL (logiciel de Harris)" et comment l'as-tu installé ?
Ton problème de dépendance n'est que la conséquence de l'impossibilité de configurer grub-common, laquelle découle apparemment d'un problème de insserv
Dernière modification par xabilon (Le 11/01/2017, à 15:06)
Pour passer un sujet en résolu : modifiez le premier message et ajoutez [Résolu] au titre.
Hors ligne
#3 Le 11/01/2017, à 16:24
- loixou29
Re : [Résolu] dpkg - grub/IDL - problèmes de dépendance
Bonjour,
IDL est un logiciel de programmation (un peu comme matlab) que j'utilise pour le travail. Pour ce qui est de l'installation, j'ai téléchargé le logiciel tout droit de leur site commercial (pour ubuntu 64x) et ai lu le script à partir du terminal ./install
Il a ensuite fallu que j'active la licence, et que je télécharge manuellement libxp6 pour que ça marche (passage par la logithèque ubuntu).
Pour plus d'informations, regarder le site du logiciel ici. J'ai suivi les conseils pour installer la librairie.
Je te remercie de t'intéresser au problème ci-dessus.
Loïc
Dernière modification par loixou29 (Le 11/01/2017, à 16:35)
Hors ligne
#4 Le 11/01/2017, à 17:31
- bruno
Re : [Résolu] dpkg - grub/IDL - problèmes de dépendance
Bonjour,
Tu devrais commencer par arrêter le service qui semble poser problème :
sudo service sys5_idl_lmgrd stopet réessayer une mise à jour, puis une mise à niveau.
Je soupçonne ton logiciel de fournir un script d'init pourri…
Hors ligne
#5 Le 11/01/2017, à 17:35
- xabilon
Re : [Résolu] dpkg - grub/IDL - problèmes de dépendance
Le paquet libxp6 n'existe pas pour Ubuntu 16.04, en tout cas pas dans les dépôts officiels. Si tu as suivi la doc d'IDL, tu as dû le télécharger depuis les dépôts Debian, puis cliquer dessus pour l'installer.
Mais je ne pense pas que ce soit la cause du problème.
Est-il possible d'avoir le contenu de ce fichier install ? si c'est un script, il peut être ouvert avec Gedit.
@bruno : oui, je soupçonne la même chose, que ce script d'install aie mis le souk dans les scripts de démarrage, ou qu'il soit simplement bugué.
Dernière modification par xabilon (Le 11/01/2017, à 17:37)
Pour passer un sujet en résolu : modifiez le premier message et ajoutez [Résolu] au titre.
Hors ligne
#6 Le 11/01/2017, à 18:54
- loixou29
Re : [Résolu] dpkg - grub/IDL - problèmes de dépendance
@Bruno: le service est arrêté. Le logiciel se lance toujours, mais toujours le même soucis.
xabilon a écrit :
Le paquet libxp6 n'existe pas pour Ubuntu 16.04, en tout cas pas dans les dépôts officiels. Si tu as suivi la doc d'IDL, tu as dû le télécharger depuis les dépôts Debian, puis cliquer dessus pour l'installer.
C'est exactement ça. Mais sans ce paquet, le logiciel ne marche pas...
Voici le script install.sh que j'ai exécuté.
#!/bin/sh
#
# $Id:
#
# This script will install Exelis VIS products for Unix.
#
yesno()
{
#
# This script asks a y/n question of the user:
#
# $* - The y/n question to ask, without the "(y/n) ?" at the end.
#
# A 0 is echoed for "no", a 1 for "yes".
#
if [ "`echo -n testing123`" = "testing123" ]; then
ECHO_NONL="echo -n"
ECHO_NONL_TAIL=
else
ECHO_NONL=echo
ECHO_NONL_TAIL=\\c
fi
RESP=""
while [ "$RESP" != y -a "$RESP" != n ]
do
$ECHO_NONL "$*? (y/n): $ECHO_NONL_TAIL" > /dev/tty
read RESP
RESP=`echo $RESP | tr '[A-Z]' '[a-z]'`
if [ "$RESP" != y -a "$RESP" != n ]; then
echo " <Please answer y for yes or n for no>" > /dev/tty
fi
done
if [ "$RESP" = y ]; then
return 1
else
return 0
fi
}
tar_unpack()
{
# This unpacks tar file
# $1 - file to untar
# $2 - String to echo
FILENAME=$1
DISPLAY_STRING=$2
echo "Unpacking $DISPLAY_STRING ..."
gunzip -c $FILENAME | $TAR $TAR_OPTIONS -
if [ $? != 0 ]; then
echo "$SCRIPT: error untarring $FILENAME in $INSTALL_DIR."
fi
}
SILENT_INSTALL=0
while getopts ":s" opt; do
case $opt in
s)
SILENT_INSTALL=1
;;
\?)
echo "Invalid option: -$OPTARG" >&2
;;
esac
done
#######################################################
# Installation
########################################################
USER=`whoami`
SCRIPT=`basename $0`
OSNAME=`uname`
MACHINENAME=`hostname`
WEB_INSTALL=0
INSTALL_DIR="/usr/local/exelis"
INSTALL_DICOM=0
INSTALL_LINUX=0
NO_SYMLINKS=0
INSTALL_SOLARIS_SPARC=0
INSTALL_SOLARIS_X86_64=0
INSTALL_DARWIN=0
INSTALL_AIX_64=0
INSTALL_ENVI_CLASSIC_HELP=0
INSTALL_ENVI_HELP=0
INSTALL_IDL_HELP=0
POST_UNPACK_OPTIONS=
INS_TYPE="ENVI"
INS_NAME="ENVI"
IDL_VERSION=85
IDL_VERSION_MAIN_NAME="8.5"
IDL_VERSION_NAME="8.5 SP1"
IDLBIN=idl$IDL_VERSION/bin
ENVI_VERSION=53
ENVI_VERSION_MAIN_NAME="5.3"
ENVI_VERSION_NAME="5.3 SP1"
ENVIBIN=envi$ENVI_VERSION/bin
LINUX_TEXT=" Linux - X86 (64-bit)"
ESE_VERSION=53
ESE_VERSION_MAIN_NAME="5.3"
ESE_VERSION_NAME="5.3 SP1"
ESEBIN=se$ESE_VERSION/bin
SUITE_NAME="IDL 8.5 & ENVI 5.3, SP1"
if [ "$INS_TYPE" = "FLEXLM" ]; then
SUITE_NAME="License Server"
fi
if [ "$INS_TYPE" = "ORTHO" ]; then
SUITE_NAME="ENVI Photogrammetry 5.3 SP1"
fi
if [ "$INS_NAME" = "IDL for AIX" ]; then
SUITE_NAME="IDL 8.5 SP1"
fi
case $INS_TYPE in
IDL)
PROD_VERSION=$IDL_VERSION
PROD_VERSION_NAME=$IDL_VERSION_NAME
PROD_VERSION_MAIN_NAME=$IDL_VERSION_MAIN_NAME
PROD_NAME="IDL"
PROD_BIN=$IDLBIN
EXIST_TESTFILE=$IDLBIN/idl
;;
ENVI)
PROD_VERSION=$ENVI_VERSION
PROD_VERSION_NAME=$ENVI_VERSION_NAME
PROD_VERSION_MAIN_NAME=$ENVI_VERSION_MAIN_NAME
PROD_NAME="ENVI"
PROD_BIN=$ENVIBIN
EXIST_TESTFILE=$ENVIBIN/envi
;;
ESE)
PROD_VERSION=$ESE_VERSION
PROD_VERSION_NAME=$ESE_VERSION_NAME
PROD_VERSION_MAIN_NAME=$ESE_VERSION_MAIN_NAME
PROD_NAME="ENVI Services Engine"
SUITE_NAME="ENVI Services Engine"
PROD_BIN=$ESEBIN
PRODUCT="ese"
EXIST_TESTFILE=$ESEBIN/EnviServicesEngine
LINUX_TEXT=" Linux - 64-bit"
;;
esac
if [ -f /etc/chown ]; then
CHOWN=/etc/chown
else
CHOWN=/bin/chown
fi
if [ \( -f /bin/dirname \) -o \( -f /usr/5bin/dirname \) ]; then
UDIR=`dirname $0`
else
UDIR=`echo $0 | awk -F\/ '{if(NF==1)
printf(".\n");else{for(i=1;i<NF;i++){if(i>1)printf("%s","/"); printf("%s",$i);}printf("\n")}}'`
fi
if [ "$UDIR" = "." ]; then
UDIR=`pwd`
fi
if [ -f "$UDIR/install/web" ]; then
WEB_INSTALL=1
fi
if [ \( "$OSNAME" = "SunOS" \) -o \( "$OSNAME" = "AIX" \) ]; then
gtar --version > /dev/null 2>&1
if [ $? != 0 ]; then
echo "gtar was not found. Please be sure gtar is installed on your system and included in your PATH."
exit 1
else
TAR="gtar"
fi
else
TAR="tar"
fi
if [ \( "$WHOAMI" != "root" \) ]; then
TAR_OPTIONS="-xf"
else
TAR_OPTIONS="-xpf"
fi
#----------
#PLatform Files
#----------
TAR_DARWIN_X86_64="bin.darwin.x86_64.tar.gz"
TAR_LINUX="bin.linux.x86_64.tar.gz"
TAR_SOLARIS2="bin.solaris2.sparc64.tar.gz"
TAR_SOLARISX_64="bin.solaris2.x86_64.tar.gz"
TAR_AIX_64="bin.ibm.rs6000_64.tar.gz"
ENVI_TAR_DARWIN_X86_64="envi.bin.darwin.x86_64.tar.gz"
ENVI_TAR_LINUX="envi.bin.linux.x86_64.tar.gz"
ENVILIDAR_TAR_LINUX="envilidar.bin.linux.x86_64.tar.gz"
ENVI_TAR_SOLARIS2="envi.bin.solaris2.sparc64.tar.gz"
TAR_ENVI_MAC_APPLESCRIPTS="envi_mac_applescripts.tar.gz"
TAR_ORTHO_BASE="ortho_base.tar.gz"
TAR_FLEXLM_BASE="flexlm.tar.gz"
TAR_FLEXLM_DARWIN="f_dar_p.tar.gz"
TAR_FLEXLM_DARWIN_I386="f_dar_i.tar.gz"
TAR_FLEXLM_DARWIN_X86_64="f_darx64.tar.gz"
TAR_FLEXLM_LINUX="f_linux.tar.gz"
TAR_FLEXLM_LINUX_64="f_linx64.tar.gz"
TAR_FLEXLM_SOLARIS2_64="f_sol64.tar.gz"
TAR_FLEXLM_SOLARIS2="f_sol32.tar.gz"
TAR_FLEXLM_SOLARISX_64="f_solx64.tar.gz"
# Display Exelis EULA. Must accept to continue.
#-------------------------------------------
if [ \( "$INS_TYPE" != "ESE" \) -a \( "$INS_TYPE" != "FLEXLM" \) ]; then
if [ "$SILENT_INSTALL" = 1 ]; then
cat "$UDIR"/install/exelis_eula.txt
else
cat "$UDIR"/install/exelis_eula.txt |more
fi
if yesno "Do you accept all of the terms of the preceding license agreement"; then
exit 1
fi
fi
if [ "$INS_TYPE" = "FLEXLM" ]; then
cat "$UDIR"/exelis_eula.txt |more
if yesno "Do you accept all of the terms of the preceding license agreement"; then
exit 1
fi
fi
if [ "$INS_TYPE" = "ESE" ]; then
if [ "$SILENT_INSTALL" = 1 ]; then
cat "$UDIR"/install/exelis_eula_enterprise.txt "$UDIR"/install/exelis_eula.txt
else
cat "$UDIR"/install/exelis_eula_enterprise.txt "$UDIR"/install/exelis_eula.txt | more
fi
if yesno "Do you accept the terms of the license agreement"; then
exit 1
fi
fi
echo "
----------------------------------------
$SUITE_NAME Installer
----------------------------------------"
#if [ "$INS_TYPE" != "ESE" ]; then
# Read in INSTALL_DIR
#-------------------------------------------
echo ""
echo "Please enter the directory to install in
(e.g. \"/usr/local/exelis \")
"
read DIR_NAME
if [ "$DIR_NAME" != "" ]; then
INSTALL_DIR=$DIR_NAME
fi
#else
#--------------------------------------------------------------
# if [ "$EXELIS_DIR" = "" ]; then
# INSTALL_DIR=/usr/local/exelis
# else
# INSTALL_DIR=$EXELIS_DIR
# fi
# Check /usr/local/exelis first for ENVI
# if [ -f $INSTALL_DIR/envi$ENVI_VERSION/bin/envi ]; then
# echo ""
# echo "An ENVI $ENVI_VERSION distribution has been located in $INSTALL_DIR.
# "
# if yesno "Do you want to install ENVI Services Engine in $INSTALL_DIR"; then
# echo "Please enter the directory containing ENVI $ENVI_VERSION:
# (e.g. \"/usr/local/exelis \")
# "
# read INSTALL_DIR
# fi
# else
# INSTALL_DIR=
# fi
#--------------------------------------------------------------
# Read in INSTALL_DIR if it's not specified.
# echo ""
# if [ "$INSTALL_DIR" = "" ]; then
# echo "Please enter the directory containing ENVI $ENVI_VERSION:
# (e.g. \"/usr/local/exelis \")
# "
# read INSTALL_DIR
# fi
# if [ ! -f $INSTALL_DIR/envi$ENVI_VERSION/bin/envi ]; then
# echo
# echo "
#ENVI $ENVI_VERSION is required to be installed prior to installing ENVI Services Engine. This directory does not contain an ENVI distribution or the correct version of ENVI.
#Please locate the directory containing ENVI $ENVI_VERSION and run this script again. If ENVI Platform installer is not installed, please install prior to running this script.
#"
# exit 1
# fi
#fi
if [ ! -d "$INSTALL_DIR" ]; then
mkdir -p $INSTALL_DIR
if [ $? != 0 ]; then
echo "
The $INSTALL_DIR directory does not exist and could not be created.
Please create this directory prior to running this script."
exit 1
fi
fi
#---------------------------
#Check for write permissions
#---------------------------
if [ ! -w $INSTALL_DIR ]; then
echo "
$SCRIPT: $INSTALL_DIR does not have write permissions.
Please correct the permissions and run this script again.
"
exit 1
fi
# Change to the installation directory
#---------------------------
cd $INSTALL_DIR
#---------------------------
# Check for existing envi installation for ortho installer
#---------------------------
if [ "$INS_TYPE" = "ORTHO" ]; then
if [ \( -d $INSTALL_DIR/envi$ENVI_VERSION \) ]; then
ENVI_INST_VER=`cat $INSTALL_DIR/envi$ENVI_VERSION/version.txt`
if [ $ENVI_INST_VER != "53SP1" ]; then
echo "
Directory $INSTALL_DIR contains a version of ENVI that is not compatible with ENVI Photogrammetry.
Please install ENVI 5.3 SP1 prior to this installation.
"
exit 1
fi
else
echo "ENVI $ENVI_VERSION is required to be installed prior to installing ENVI Photogrammetry. This directory does not contain an ENVI distribution or the correct version of ENVI.
Please locate the directory containing ENVI $ENVI_VERSION and run this script again. If ENVI Platform installer is not installed, please install prior to running this script."
exit 1
fi
fi
if [ \( "$INS_TYPE" != "FLEXLM" \) -a \( "$INS_TYPE" != "ORTHO" \) ]; then
# Do a quick check to see if the CD ROM is really where we think it is.
if [ \( ! -f $UDIR/install/required/base1.tar.gz \) ]; then
echo "Unable to locate tar files. Please execute this script using a full path."
exit 1
fi
#---------------------------
# Check for product version compatibility
#---------------------------
# ENVI and IDL need to have the same version.
# Only checking for ENVI on an IDL install, since ENVI will install IDL (minus Sol x86).
if [ "$INS_TYPE" = "IDL" ]; then
if [ \( -d $INSTALL_DIR/envi$ENVI_VERSION \) ]; then
ENVI_INST_VER=`cat $INSTALL_DIR/envi$ENVI_VERSION/version.txt`
if [ $ENVI_INST_VER != "53" ]; then
echo "
Directory $INSTALL_DIR contains a version of ENVI that is not compatible with IDL 8.5.
Please install ENVI 5.3 prior to this installation.
"
exit 1
fi
fi
fi
#---------------------------
# Check for an existing installation and give them a chance to abort.
#---------------------------
if [ "$SILENT_INSTALL" = 0 ]; then
JUNK=`/bin/ls`
if [ "$JUNK" != "" ]; then
echo " "
if [ \( -f $INSTALL_DIR/$EXIST_TESTFILE \) ]; then # Existing IDL directory
echo "This directory contains an existing version of $SUITE_NAME.
If you continue, this installation will now be updated with $SUITE_NAME."
yesno "Continue"
if [ $? -eq 0 ]; then
exit
fi
echo " "
fi
fi
fi
SELECTION_GOOD=0
PLATFORM_SELECTED=0
INSTALL_IDL=0
INSTALL_ENVI=0
while [ "$SELECTION_GOOD" = "0" ]; do
#if [ -f $UDIR/install/required/base1.tar.gz ]; then
# yesno "IDL Virtual Machine"
# if [ $? -eq 1 ]; then
# INSTALL_VM=1
# fi
#fi
if [ "$INS_TYPE" = "ESE" ]; then
INSTALL_IDL=1
INSTALL_ENVI=1
INSTALL_LINUX=1
PLATFORM_SELECTED=1
else
if [ "$INS_NAME" = "IDL for AIX" ]; then
INSTALL_IDL=1
PLATFORM_SELECTED=1
INSTALL_AIX_64=1
else
echo " "
echo "Please select the products for installation."
while [ \( "$INSTALL_IDL" = "0" \) -a \( "$INSTALL_ENVI" = "0" \) ]; do
if [ -f $UDIR/install/required/base2.tar.gz ]; then
yesno "IDL"
if [ $? -eq 1 ]; then
INSTALL_IDL=1
fi
fi
if [ -f $UDIR/install/required/envi.tar.gz ]; then
yesno "ENVI"
if [ $? -eq 1 ]; then
INSTALL_ENVI=1
fi
fi
echo " "
if [ \( "$INSTALL_IDL" = "0" \) -a \( "$INSTALL_ENVI" = "0" \) ]; then
yesno "You must select at least one product. Continue"
if [ $? -eq 0 ]; then
exit
fi
fi
done # PRODUCT_SELECTED
#For web install, don't ask, but there will only be one platform.
if [ "$WEB_INSTALL" = 0 ]; then
echo " "
echo "Please select the platforms for installation.
"
fi
while [ "$PLATFORM_SELECTED" = "0" ]; do
if [ -f $UDIR/install/platforms/$TAR_LINUX ]; then
if [ "$WEB_INSTALL" = "0" ]; then
yesno $LINUX_TEXT
if [ $? -eq 1 ]; then
INSTALL_LINUX=1
PLATFORM_SELECTED=1
fi
else
INSTALL_LINUX=1
PLATFORM_SELECTED=1
fi
fi
if [ -f $UDIR/install/platforms/$TAR_DARWIN_X86_64 ]; then
if [ "$WEB_INSTALL" = "0" ]; then
yesno "Mac OS X - Intel (64-bit)"
if [ $? -eq 1 ]; then
INSTALL_DARWIN=1
PLATFORM_SELECTED=1
fi
else
INSTALL_DARWIN=1
PLATFORM_SELECTED=1
fi
fi
if [ -f $UDIR/install/platforms/$TAR_SOLARIS2 ]; then
if [ "$WEB_INSTALL" = "0" ]; then
yesno "Sun Solaris - Sparc (64-bit)"
if [ $? -eq 1 ]; then
INSTALL_SOLARIS_SPARC=1
PLATFORM_SELECTED=1
fi
else
INSTALL_SOLARIS_SPARC=1
PLATFORM_SELECTED=1
fi
fi
if [ \( -f $UDIR/install/platforms/$TAR_SOLARISX_64 \) -a \( "$INSTALL_IDL" = "1" \) ]; then
if [ "$WEB_INSTALL" = "0" ]; then
yesno "Sun Solaris - X86 (64-bit, IDL-only)"
if [ $? -eq 1 ]; then
INSTALL_SOLARIS_X86_64=1
PLATFORM_SELECTED=1
fi
else
PLATFORM_SELECTED=1
INSTALL_SOLARIS_X86_64=1
fi
fi
echo " "
if [ "$PLATFORM_SELECTED" = "0" ]; then
yesno "You must select at least one hardware platform. Continue"
if [ $? -eq 0 ]; then
exit
fi
fi
done # PLATFORM_SELECTED
fi #!AIX
fi #!ESE
echo "Please select the optional features for installation."
echo " "
if [ "$INSTALL_IDL" = "1" ]; then
if [ -f $UDIR/install/optional/idl_help.tar.gz ]; then
yesno "IDL Help files"
if [ $? -eq 1 ]; then
INSTALL_IDL_HELP=1
fi
fi
fi
if [ "$INSTALL_ENVI" = "1" ]; then
if [ -f $UDIR/install/optional/envi_classic_help.tar.gz ]; then
yesno "ENVI Classic Help files"
if [ $? -eq 1 ]; then
INSTALL_ENVI_CLASSIC_HELP=1
fi
fi
if [ -f $UDIR/install/optional/envi_help.tar.gz ]; then
yesno "ENVI Help files"
if [ $? -eq 1 ]; then
INSTALL_ENVI_HELP=1
fi
fi
fi
if [ "$INS_TYPE" != "ESE" ]; then
if [ "$INS_NAME" != "IDL for AIX" ]; then
if [ -f $UDIR/install/optional/dicom ]; then
yesno "DICOM Network Services"
if [ $? -eq 1 ]; then
INSTALL_DICOM=1
fi
fi
fi # !AIX
fi # !ese
echo "
---------------------
Installation Summary:
---------------------
$SUITE_NAME
Installation location: $INSTALL_DIR
Login: $USER"
if [ "$INS_TYPE" != "ESE" ]; then
echo "Products:"
#if [ "$INSTALL_VM" = 1 ]; then
# echo " IDL Virtual Machine"
#fi
if [ "$INSTALL_IDL" = 1 ]; then
echo " IDL"
fi
if [ "$INSTALL_ENVI" = 1 ]; then
echo " ENVI"
fi
if [ "$INSTALL_IDL_HELP" = 1 ]; then
echo " IDL Help files"
fi
if [ -f $UDIR/install/optional/envi_classic_help.tar.gz ]; then
if [ "$INSTALL_ENVI_CLASSIC_HELP" = 1 ]; then
echo " ENVI Classic Help files"
fi
fi
if [ -f $UDIR/install/optional/envi_help.tar.gz ]; then
if [ "$INSTALL_ENVI_HELP" = 1 ]; then
echo " ENVI Help files"
fi
fi
if [ "$INSTALL_DICOM" = 1 ]; then
echo " DICOM Network Services"
fi
fi # !ese
echo "Platforms:"
if [ "$INSTALL_LINUX" = "1" ]; then
echo "$LINUX_TEXT"
fi
if [ "$INSTALL_DARWIN" = "1" ]; then
echo " Mac OS X - Intel (64-bit)"
fi
if [ "$INSTALL_SOLARIS_SPARC" = "1" ]; then
echo " Sun Solaris - Sparc (64-bit)"
fi
if [ "$INSTALL_SOLARIS_X86_64" = "1" ]; then
echo " Sun Solaris - X86 (64-bit, IDL-only)"
fi
if [ "$INSTALL_AIX_64" = "1" ]; then
echo " IBM AIX RS6000 (64-bit, IDL-only)"
fi
echo " "
yesno "Install the above configuration"
if [ $? -eq 1 ]; then
echo " "
echo "Installation continuing..."
SELECTION_GOOD=1
else
if [ "$WEB_INSTALL" = 0 ]; then
yesno "Re-select configuration"
if [ $? -eq 1 ]; then
SELECTION_GOOD=0
PLATFORM_SELECTED=0
INSTALL_IDL=0
INSTALL_ENVI=0
INSTALL_DICOM=0
INSTALL_LINUX=0
INSTALL_DARWIN=0
INSTALL_SOLARIS_SPARC=0
INSTALL_SOLARIS_X86_64=0
INSTALL_ENVI_CLASSIC_HELP=0
INSTALL_ENVI_HELP=0
INSTALL_IDL_HELP=0
else
echo "$INS_NAME installation aborted."
exit 0
fi
else
echo "$INS_NAME installation aborted."
exit 0
fi
fi
echo " "
done # SELECTION_GOOD
#check for existance of the "idl" link and remove if present. This link was
#used in installations prior to IDL 8.0/ENVI 5.0
if [ -L idl ]; then
rm -f idl
fi
if [ "$INS_NAME" = "ENVI" ]; then
if [ -L envi ]; then
rm -f envi
fi
fi
# Preserve the file modes in the source tar files
umask 022
if [ "$INSTALL_ENVI" = "1" ]; then
FILES=`echo $UDIR/install/required/*.tar.gz`
# Uncompress any compress (.gz) files
if [ "$FILES" != '*.tar.gz' ]; then
for FILE in $FILES; do
tar_unpack $FILE `basename $FILE`
if [ $? != 0 ]; then
echo "$SCRIPT: error untarring $FILE in $INSTALL_DIR."
fi
done
fi
fi
if [ \( "$INSTALL_IDL" = "1" \) -a \( "$INSTALL_ENVI" != "1" \) ]; then
INS_TYPE="IDL"
tar_unpack $UDIR/install/required/base1.tar.gz base1.tar.gz
tar_unpack $UDIR/install/required/base2.tar.gz base2.tar.gz
tar_unpack $UDIR/install/required/idl_demo.tar.gz idl_demo.tar.gz
tar_unpack $UDIR/install/required/maps_high.tar.gz maps_high.tar.gz
if [ "$INS_NAME" != "IDL for AIX" ]; then
tar_unpack $UDIR/install/required/idl_workbench.tar.gz idl_workbench.tar.gz
fi
fi
#if [ \( "$INSTALL_VM" = "1" \) -a \( "$INSTALL_IDL" != "1" \) -a \( "$INSTALL_ENVI" != "1" \) ]; then
# tar_unpack $UDIR/install/required/base1.tar.gz base1.tar.gz
#fi
if [ \( -f $UDIR/install/platforms/$TAR_DARWIN_X86_64 \) -a \( "$INSTALL_DARWIN" = "1" \) ]; then
tar_unpack $UDIR/install/platforms/$TAR_DARWIN_X86_64 $TAR_DARWIN_X86_64
if [ "$INSTALL_ENVI" = "1" ]; then
tar_unpack $UDIR/install/platforms/$TAR_ENVI_MAC_APPLESCRIPTS $TAR_ENVI_MAC_APPLESCRIPTS
fi
fi
if [ \( -f $UDIR/install/platforms/$TAR_LINUX \) -a \( "$INSTALL_LINUX" = "1" \) ]; then
tar_unpack $UDIR/install/platforms/$TAR_LINUX $TAR_LINUX
fi
if [ \( -f $UDIR/install/platforms/$TAR_SOLARIS2 \) -a \( "$INSTALL_SOLARIS_SPARC" = "1" \) ]; then
tar_unpack $UDIR/install/platforms/$TAR_SOLARIS2 $TAR_SOLARIS2
fi
if [ \( -f $UDIR/install/platforms/$TAR_SOLARISX_64 \) -a \( "$INSTALL_SOLARIS_X86_64" = "1" \) ]; then
tar_unpack $UDIR/install/platforms/$TAR_SOLARISX_64 $TAR_SOLARISX_64
fi
if [ \( -f $UDIR/install/platforms/$TAR_AIX_64 \) -a \( "$INSTALL_AIX_64" = "1" \) ]; then
tar_unpack $UDIR/install/platforms/$TAR_AIX_64 $TAR_AIX_64
fi
if [ "$INSTALL_ENVI" = "1" ]; then
if [ \( -f $UDIR/install/platforms/$ENVI_TAR_LINUX \) -a \( "$INSTALL_LINUX" = "1" \) ]; then
tar_unpack $UDIR/install/platforms/$ENVI_TAR_LINUX $ENVI_TAR_LINUX
fi
if [ \( -f $UDIR/install/platforms/$ENVILIDAR_TAR_LINUX \) -a \( "$INSTALL_LINUX" = "1" \) ]; then
tar_unpack $UDIR/install/platforms/$ENVILIDAR_TAR_LINUX $ENVILIDAR_TAR_LINUX
fi
if [ \( -f $UDIR/install/platforms/$ENVI_TAR_SOLARIS2 \) -a \( "$INSTALL_SOLARIS_SPARC" = "1" \) ]; then
tar_unpack $UDIR/install/platforms/$ENVI_TAR_SOLARIS2 $ENVI_TAR_SOLARIS2
fi
if [ \( -f $UDIR/install/platforms/$ENVI_TAR_DARWIN_X86_64 \) -a \( "$INSTALL_DARWIN" = "1" \) ]; then
tar_unpack $UDIR/install/platforms/$ENVI_TAR_DARWIN_X86_64 $ENVI_TAR_DARWIN_X86_64
fi
fi
if [ \( -f $UDIR/install/optional/envi_help.tar.gz \) -a \( "$INSTALL_ENVI_HELP" = "1" \) ]; then
tar_unpack $UDIR/install/optional/envi_help.tar.gz envi_help.tar.gz
fi
if [ \( -f $UDIR/install/optional/envi_help.tar.gz \) -a \( "$INSTALL_ENVI_CLASSIC_HELP" = "1" \) ]; then
tar_unpack $UDIR/install/optional/envi_classic_help.tar.gz envi_classic_help.tar.gz
fi
if [ \( -f $UDIR/install/optional/idl_help.tar.gz \) -a \( "$INSTALL_IDL_HELP" = "1" \) ]; then
tar_unpack $UDIR/install/optional/idl_help.tar.gz idl_help.tar.gz
fi
# Finish the unpack operation for IDL.
sh ./$IDLBIN/post_unpack $POST_UNPACK_OPTIONS
# Call Envi post installation script
if [ \( "$INSTALL_ENVI" = "1" \) -o \( "$INS_TYPE" = "ESE" \) ] ; then
sh ./$ENVIBIN/post_unpack
fi
# logged in as root and files writable? Make files belong to this account.
if [ "$USER" = "root" -a -w . ]; then
$CHOWN -R root idl$IDL_VERSION > /dev/null 2>&1
$CHOWN -R root envi$ENVI_VERSION > /dev/null 2>&1
$CHOWN -R root license > /dev/null 2>&1
fi
fi
if [ "$INS_TYPE" = "ORTHO" ]; then
echo "
---------------------
Installation Summary:
---------------------
Product: $SUITE_NAME
Installation location: $INSTALL_DIR
Login: $USER"
echo " "
yesno "Install ENVI Photogrammetry"
if [ $? -eq 1 ]; then
echo " "
echo "Installation continuing..."
else
echo "$INS_NAME installation aborted."
exit 0
fi
if [ -f $UDIR/install/required/$TAR_ORTHO_BASE ]; then
tar_unpack $UDIR/install/required/$TAR_ORTHO_BASE $TAR_ORTHO_BASE
fi
fi
if [ "$INS_TYPE" = "FLEXLM" ]; then
PLATFORM_SELECTED=0
SELECTION_GOOD=0
while [ "$SELECTION_GOOD" = "0" ]; do
#For web install, don't ask, but there will only be one platform.
if [ "$WEB_INSTALL" = 0 ]; then
echo " "
echo "Please select the platforms for installation.
"
fi
while [ "$PLATFORM_SELECTED" = "0" ]; do
if [ -f $UDIR/platforms/$TAR_FLEXLM_LINUX_64 ]; then
if [ "$WEB_INSTALL" = "0" ]; then
yesno $LINUX_TEXT
if [ $? -eq 1 ]; then
INSTALL_LINUX=1
PLATFORM_SELECTED=1
fi
else
INSTALL_LINUX=1
PLATFORM_SELECTED=1
fi
fi
if [ -f $UDIR/platforms/$TAR_FLEXLM_DARWIN_X86_64 ]; then
if [ "$WEB_INSTALL" = "0" ]; then
yesno "Mac OS X - Intel (64-bit)"
if [ $? -eq 1 ]; then
INSTALL_DARWIN=1
PLATFORM_SELECTED=1
fi
else
INSTALL_DARWIN=1
PLATFORM_SELECTED=1
fi
fi
if [ -f $UDIR/platforms/$TAR_FLEXLM_SOLARIS2_64 ]; then
if [ "$WEB_INSTALL" = "0" ]; then
yesno "Sun Solaris - Sparc (64-bit)"
if [ $? -eq 1 ]; then
INSTALL_SOLARIS_SPARC=1
PLATFORM_SELECTED=1
fi
else
INSTALL_SOLARIS_SPARC=1
PLATFORM_SELECTED=1
fi
fi
if [ -f $UDIR/platforms/$TAR_FLEXLM_SOLARISX_64 ]; then
if [ "$WEB_INSTALL" = "0" ]; then
yesno "Sun Solaris - X86 (64-bit)"
if [ $? -eq 1 ]; then
INSTALL_SOLARIS_X86_64=1
PLATFORM_SELECTED=1
fi
else
PLATFORM_SELECTED=1
INSTALL_SOLARIS_X86_64=1
fi
fi
echo " "
if [ "$PLATFORM_SELECTED" = "0" ]; then
yesno "You must select at least one hardware platform. Continue"
if [ $? -eq 0 ]; then
exit
fi
fi
done # PLATFORM_SELECTED
echo "
---------------------
Installation Summary:
---------------------
Product: $SUITE_NAME
Installation location: $INSTALL_DIR
Login: $USER"
echo "Platforms:"
if [ "$INSTALL_LINUX" = "1" ]; then
echo "$LINUX_TEXT"
fi
if [ "$INSTALL_DARWIN" = "1" ]; then
echo " Mac OS X - Intel (64-bit)"
fi
if [ "$INSTALL_SOLARIS_SPARC" = "1" ]; then
echo " Sun Solaris - Sparc (64-bit)"
fi
if [ "$INSTALL_SOLARIS_X86_64" = "1" ]; then
echo " Sun Solaris - X86 (64-bit)"
fi
echo " "
yesno "Install the above configuration"
if [ $? -eq 1 ]; then
echo " "
echo "Installation continuing..."
SELECTION_GOOD=1
else
if [ "$WEB_INSTALL" = 0 ]; then
yesno "Re-select configuration"
if [ $? -eq 1 ]; then
SELECTION_GOOD=0
PLATFORM_SELECTED=0
INSTALL_LINUX=0
INSTALL_DARWIN=0
INSTALL_SOLARIS_SPARC=0
INSTALL_SOLARIS_X86_64=0
else
echo "$INS_NAME installation aborted."
exit 0
fi
else
echo "$INS_NAME installation aborted."
exit 0
fi
fi
echo " "
done # SELECTION_GOOD
if [ -f $UDIR/required/$TAR_FLEXLM_BASE ]; then
tar_unpack $UDIR/required/$TAR_FLEXLM_BASE $TAR_FLEXLM_BASE
fi
if [ \( -f $UDIR/platforms/$TAR_FLEXLM_DARWIN_X86_64 \) -a \( "$INSTALL_DARWIN" = "1" \) ]; then
tar_unpack $UDIR/platforms/$TAR_FLEXLM_DARWIN_X86_64 $TAR_FLEXLM_DARWIN_X86_64
fi
if [ \( -f $UDIR/platforms/$TAR_FLEXLM_LINUX_64 \) -a \( "$INSTALL_LINUX" = "1" \) ]; then
tar_unpack $UDIR/platforms/$TAR_FLEXLM_LINUX_64 $TAR_FLEXLM_LINUX_64
fi
if [ \( -f $UDIR/platforms/$TAR_FLEXLM_SOLARIS2_64 \) -a \( "$INSTALL_SOLARIS_SPARC" = "1" \) ]; then
tar_unpack $UDIR/platforms/$TAR_FLEXLM_SOLARIS2_64 $TAR_FLEXLM_SOLARIS2_64
fi
if [ \( -f $UDIR/platforms/$TAR_FLEXLM_SOLARISX_64 \) -a \( "$INSTALL_SOLARIS_X86_64" = "1" \) ]; then
tar_unpack $UDIR/platforms/$TAR_FLEXLM_SOLARISX_64 $TAR_FLEXLM_SOLARISX_64
fi
sh ./$IDLBIN/post_unpack
if [ "$INS_NAME" != "IDL for AIX" ]; then
echo " "
if [ `sh $INSTALL_DIR/$IDLBIN/yesno "Do you want to run the License Wizard"` = "1" ]; then
IDL_DIR=
export IDL_DIR
$INSTALL_DIR/idl$IDL_VERSION/bin/exelislicense > /dev/null 2>&1
fi
fi # AIX
PRODUCT="idl"
fi # enf of "$INS_TYPE" = "FLEXLM"
# Read in userid_to_run_daemon
#-------------------------------------------
if [ "$INS_TYPE" = "ESE" ]; then
if [ -f $UDIR/install/optional/ese.tar.gz ]; then
tar_unpack $UDIR/install/optional/ese.tar.gz ese.tar.gz
fi
if [ \( "$USER" = "root" \) ]; then
echo "
Please enter the name of the user account under which to run ESE.
This should be an account with limited privileges."
read userid_to_run_daemon
echo "
Please enter the location in which to install the ESE working directory.
The user selected above needs write access to this directory.
If you are going to setup a clustered environment, select a directory
that all machines can access."
read ESE_WORK_DIR
if [ ! -d "$ESE_WORK_DIR" ]; then
mkdir -p $ESE_WORK_DIR
if [ $? != 0 ]; then
echo "
The $ESE_WORK_DIR directory does not exist and could not be created.
Please create this directory prior to running this script."
exit 1
fi
fi
cd $ESE_WORK_DIR
fi
echo ""
if [ -f $UDIR/install/optional/ese_base.tar.gz ]; then
tar_unpack $UDIR/install/optional/ese_base.tar.gz ese_base.tar.gz
fi
if [ -f $UDIR/install/optional/ese_help.tar.gz ]; then
tar_unpack $UDIR/install/optional/ese_help.tar.gz ese_help.tar.gz
fi
# if [ -f $UDIR/install/optional/ese_enviweb.tar.gz ]; then
# tar_unpack $UDIR/install/optional/ese_enviweb.tar.gz ese_enviweb.tar.gz
# fi
if [ "$USER" = "root" ]; then
chmod -R 775 $ESE_WORK_DIR
$CHOWN -R $userid_to_run_daemon $ESE_WORK_DIR > /dev/null 2>&1
if [ -w ./$ESEBIN/post_unpack ]; then
sed "s|EXELIS_DIR=.*|EXELIS_DIR=$INSTALL_DIR|; s|UDIR=.*|UDIR=$ESE_WORK_DIR|" ./$ESEBIN/post_unpack.orig > ./$ESEBIN/post_unpack
fi
if [ -w ./$ESEBIN/esehelp ]; then
sed "s|ESE_HELP_DIR=.*|ESE_HELP_DIR=$ESE_WORK_DIR|" ./$ESEBIN/esehelp.orig > ./$ESEBIN/esehelp
fi
fi
sh ./$ESEBIN/post_unpack
echo "
Please enter the hostname of the machine which will serve as the
master in a clustered environment. If not setting up ESE on a cluster,
this should be the name of the localhost. e.g. $MACHINENAME"
read master_machine
if [ "$master_machine" = "" ]; then
master_machine=$MACHINENAME
fi
if [ -w ./$ESEBIN/server.cfg ]; then
sed "s|your_machine_name|$master_machine|" ./$ESEBIN/server.cfg.orig > ./$ESEBIN/server.cfg
fi
if [ \( "$USER" = "root" \) -a \( "$SILENT_INSTALL" != 1 \) ]; then
echo " "
if [ `sh $INSTALL_DIR/$IDLBIN/yesno "Do you want to create the symbolic links in /usr/local/bin"` = "1" ]; then
if [ \( "$INS_TYPE" = "ESE" \) -a \( "$USER" = "root" \) ]; then
if [ -w $ESE_WORK_DIR/$PROD_BIN/create_symlinks ]; then
sed "s|ESE_WORK_DIR=.*|ESE_WORK_DIR=$ESE_WORK_DIR|" $ESE_WORK_DIR/$PROD_BIN/create_symlinks.orig > $ESE_WORK_DIR/$PROD_BIN/create_symlinks
fi
cd $INSTALL_DIR
$ESE_WORK_DIR/$PROD_BIN/create_symlinks
else
$INSTALL_DIR/$PROD_BIN/create_symlinks
fi
else
NO_SYMLINKS=1
fi
fi
#$INSTALL_DIR/idl$IDL_VERSION/bin/idl -em=$ESE_WORK_DIR/se$ESE_VERSION/lib/ese_wrapenvitasksforese.sav -arg $ESE_WORK_DIR/se$ESE_VERSION/plugins/ > /dev/null 2>&1
# if [ `sh $INSTALL_DIR/$IDLBIN/yesno "Do you want to run the License Wizard"` = "1" ]; then
# IDL_DIR=
# export IDL_DIR
# $INSTALL_DIR/idl$IDL_VERSION/bin/exelislicense > /dev/null 2>&1
# fi
DO_LICENSE_PROMPT=1
LICENSE_FILE_NAME=
INSTALLED_LICENSE_FILE=$INSTALL_DIR/license/license.dat
if [ `sh $INSTALL_DIR/$IDLBIN/yesno "Do you have a license file to install now"` = "1" ]; then
while [ "$DO_LICENSE_PROMPT" = "1" ]
do
echo ""
echo "Please enter the full path to the license file you wish to install.
(e.g. \"/tmp/my_license.dat \")
"
read LICENSE_FILE_NAME
if [ -f "$LICENSE_FILE_NAME" ]; then
cp -f $LICENSE_FILE_NAME $INSTALLED_LICENSE_FILE
DO_LICENSE_PROMPT=0
else
echo ""
if [ `sh $INSTALL_DIR/$IDLBIN/yesno "$LICENSE_FILE_NAME does not exist, try again"` = "0" ]; then
DO_LICENSE_PROMPT=0
fi
fi
done
else
DO_LICENSE_PROMPT=0
fi
if [ -f "$INSTALLED_LICENSE_FILE" ]; then
echo ""
if [ "$LICENSE_FILE_NAME" = "" ]; then
echo "A license file was previously installed. You may need to update it to use ENVI Services Engine."
else
echo "$LICENSE_FILE_NAME was successfully installed."
fi
else
echo ""
echo "WARNING: No license file is installed. Please install a valid license after completing this installation."
fi
if [ "$USER" = "root" ]; then
# Update INSTALL_DIR in EnviServicesEngine
cd $ESE_WORK_DIR
if [ -w ./$ESEBIN/ese ]; then
sed "s|EXELIS_INSTALLDIR=.*|EXELIS_INSTALLDIR=$INSTALL_DIR|; s|EXELIS_WORKDIR=.*|EXELIS_WORKDIR=$ESE_WORK_DIR|" ./$ESEBIN/ese.orig > ./$ESEBIN/ese
fi
if [ -w ./$ESEBIN/ese-install-initd ]; then
sed "s|exelisdir=.*|exelisdir=$ESE_WORK_DIR|" ./$ESEBIN/ese-install-initd.orig > ./$ESEBIN/ese-install-initd
fi
if [ "$userid_to_run_daemon" != "" ]; then
echo ""
if [ `sh $INSTALL_DIR/$IDLBIN/yesno "Would you like to install ENVI Services Engine as
a service to start at boot time on this machine"` = "1" ]; then
./$ESEBIN/ese-install-initd -u $userid_to_run_daemon
echo ""
if [ `sh $INSTALL_DIR/$IDLBIN/yesno "Do you want to start the ENVI Services Engine now"` = "1" ]; then
if [ -f /usr/sbin/service ] ; then
sudo /usr/sbin/service ese start
else
sudo /sbin/service ese start
fi
fi
fi
fi
fi
fi # enf of "$INS_TYPE" = "ESE"
# Offer to run the install command now
if [ \( "$INS_TYPE" != "ESE" \) -a \( "$INS_TYPE" != "FLEXLM" \) ]; then
if [ "$INSTALL_ENVI" = "1" ]; then
PROD_BIN=$ENVIBIN
PRODUCT="envi"
else
PROD_BIN=$IDLBIN
PRODUCT="idl"
fi
if [ \( "$USER" = "root" \) -a \( "$SILENT_INSTALL" != 1 \) -a \( "$INS_TYPE" != "ORTHO" \) ]; then
echo " "
if [ `sh $INSTALL_DIR/$IDLBIN/yesno "Do you want to create the symbolic links in /usr/local/bin"` = "1" ]; then
./$PROD_BIN/create_symlinks
else
NO_SYMLINKS=1
fi
fi
if [ "$INSTALL_DICOM" = "1" ]; then
echo " "
if [ `sh $INSTALL_DIR/$IDLBIN/yesno "Do you want to start the DICOM Network Services at boot time"` = "1" ]; then
$INSTALL_DIR/idl$IDL_VERSION/bin/dicomexstorscp_install
fi
fi
echo " "
if [ \( "$INS_NAME" != "IDL for AIX" \) -a \( "$SILENT_INSTALL" != 1 \) ]; then
if [ `sh $INSTALL_DIR/$IDLBIN/yesno "Do you want to run the License Wizard"` = "1" ]; then
IDL_DIR=
export IDL_DIR
$INSTALL_DIR/idl$IDL_VERSION/bin/exelislicense > /dev/null 2>&1
fi
fi
fi
# Clean up Web install
if [ "$WEB_INSTALL" = 1 ]; then
rm -f $UDIR/install/exelis_eula.txt
rm -rf $UDIR/install/required
rm -rf $UDIR/install/optional
rm -rf $UDIR/install/platforms
rm -f $UDIR/install/web
rmdir install
fi
if [ \( "$INS_TYPE" = "ESE" \) -a \( "$USER" = "root" \) ]; then
# For a clustered environment, the path should be set to ESE_WORK_DIR
if [ "$ESE_WORK_DIR" != "" ]; then
INSTALL_DIR=$ESE_WORK_DIR
fi
fi
if [ \( "$INS_TYPE" != "ORTHO" \) ]; then
if [ \( "$USER" != "root" \) -o \( "$NO_SYMLINKS" = "1" \) ]; then
echo "
----------------------
Installation Complete:
----------------------
Setup files exist in the installation to run the product.
Have users set up their accounts as shown below:
Have your C-shell users add the following line to their .cshrc files:
source $INSTALL_DIR/$PROD_BIN/${PRODUCT}_setup
Have your Korn shell users add the following line to their .profile files:
. $INSTALL_DIR/$PROD_BIN/${PRODUCT}_setup.ksh
Have your Bash shell users add the following line to their .bashrc files:
. $INSTALL_DIR/$PROD_BIN/${PRODUCT}_setup.bash
"
fi
fi
echo " "
echo "The installation has successfully been completed."
exit 0 Hors ligne
#7 Le 12/01/2017, à 00:05
- xabilon
Re : [Résolu] dpkg - grub/IDL - problèmes de dépendance
Que donne :
sudo service sys5_idl_lmgrd stop
sudo dpkg --configure -aPour passer un sujet en résolu : modifiez le premier message et ajoutez [Résolu] au titre.
Hors ligne
#8 Le 12/01/2017, à 10:14
- loixou29
Re : [Résolu] dpkg - grub/IDL - problèmes de dépendance
J'ai l'impression que cela ne stop pas la procédure sys5_idl_lmgrd...
loic@loic-S301LP:~$ sudo service sys5_idl_lmgrd stop
[sudo] Mot de passe de loic :
loic@loic-S301LP:~$ sudo dpkg --configure -a
Paramétrage de grub-common (2.02~beta2-36ubuntu3.6) ...
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
insserv: warning: script 'K01sys5_idl_lmgrd' missing LSB tags and overrides
insserv: warning: script 'sys5_idl_lmgrd' missing LSB tags and overrides
insserv: There is a loop at service plymouth if started
insserv: There is a loop between service plymouth and procps if started
insserv: loop involving service procps at depth 2
insserv: loop involving service udev at depth 1
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Max recursions depth 99 reached
insserv: loop involving service bluetooth at depth 1
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: There is a loop between service sys5_idl_lmgrd and hwclock if started
insserv: loop involving service hwclock at depth 1
insserv: There is a loop at service sys5_idl_lmgrd if started
insserv: There is a loop between service plymouth and urandom if started
insserv: loop involving service urandom at depth 4
insserv: loop involving service mountdevsubfs at depth 2
insserv: There is a loop between service sys5_idl_lmgrd and udev if started
insserv: loop involving service mountkernfs at depth 1
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: loop involving service checkroot at depth 4
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: There is a loop between service sys5_idl_lmgrd and dns-clean if started
insserv: loop involving service dns-clean at depth 1
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: exiting now without changing boot order!
update-rc.d: error: insserv rejected the script header
dpkg: erreur de traitement du paquet grub-common (--configure) :
le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1
dpkg: des problèmes de dépendances empêchent la configuration de grub-efi :
grub-efi dépend de grub-common (= 2.02~beta2-36ubuntu3.6) ; cependant :
Le paquet grub-common n'est pas encore configuré.
dpkg: erreur de traitement du paquet grub-efi (--configure) :
problèmes de dépendances - laissé non configuré
dpkg: des problèmes de dépendances empêchent la configuration de grub-efi-amd64-bin :
grub-efi-amd64-bin dépend de grub-common (= 2.02~beta2-36ubuntu3.6) ; cependant :
Le paquet grub-common n'est pas encore configuré.
dpkg: erreur de traitement du paquet grub-efi-amd64-bin (--configure) :
problèmes de dépendances - laissé non configuré
dpkg: des problèmes de dépendances empêchent la configuration de grub-efi-amd64 :
grub-efi-amd64 dépend de grub-common (= 2.02~beta2-36ubuntu3.6) ; cependant :
Le paquet grub-common n'est pas encore configuré.
grub-efi-amd64 dépend de grub-efi-amd64-bin (= 2.02~beta2-36ubuntu3.6) ; cependant :
Le paquet grub-efi-amd64-bin n'est pas encore configuré.
dpkg: erreur de traitement du paquet grub-efi-amd64 (--configure) :
problèmes de dépendances - laissé non configuré
dpkg: des problèmes de dépendances empêchent la configuration de grub2-common :
grub2-common dépend de grub-common (= 2.02~beta2-36ubuntu3.6) ; cependant :
Le paquet grub-common n'est pas encore configuré.
dpkg: erreur de traitement du paquet grub2-common (--configure) :
problèmes de dépendances - laissé non configuré
Des erreurs ont été rencontrées pendant l'exécution :
grub-common
grub-efi
grub-efi-amd64-bin
grub-efi-amd64
grub2-commonHors ligne
#9 Le 12/01/2017, à 11:30
- bruno
Re : [Résolu] dpkg - grub/IDL - problèmes de dépendance
Le responsable est probablement le script /etc/init/sys5_idl_lmgrd. Ce serait bien de voir ce qu'il contient.
Tu peux voir l'état du service avec :
sudo systemctl status sys5_idl_lmgrdSinon pour désactiver ce service :
sudo update-rc.d -f sys5_idl_lmgrd removeet redémarrage du système.
Hors ligne
#10 Le 12/01/2017, à 14:01
- loixou29
Re : [Résolu] dpkg - grub/IDL - problèmes de dépendance
@Bruno: je crois que tu as touché le problème du doigt!
...skipping...
● sys5_idl_lmgrd.service - SYSV: This script is used to start and stop the IDL network license manager.
Loaded: loaded (/etc/init.d/sys5_idl_lmgrd; bad; vendor preset: enabled)
Active: failed (Result: exit-code) since lun. 2017-01-09 09:04:08 CET; 3 days ago
Docs: man:systemd-sysv-generator(8)
janv. 09 09:04:08 loic-S301LP systemd[1]: Starting SYSV: This script is used to start and stop the IDL network license manager....
janv. 09 09:04:08 loic-S301LP sys5_idl_lmgrd[1087]: /etc/init.d/sys5_idl_lmgrd: Can't find the idl license file: /usr/local/exelis/license
janv. 09 09:04:08 loic-S301LP systemd[1]: sys5_idl_lmgrd.service: Control process exited, code=exited status=1
janv. 09 09:04:08 loic-S301LP systemd[1]: Failed to start SYSV: This script is used to start and stop the IDL network license manager..
janv. 09 09:04:08 loic-S301LP systemd[1]: sys5_idl_lmgrd.service: Unit entered failed state.
janv. 09 09:04:08 loic-S301LP systemd[1]: sys5_idl_lmgrd.service: Failed with result 'exit-code'.
janv. 11 17:52:45 loic-S301LP systemd[1]: Stopped SYSV: This script is used to start and stop the IDL network license manager..
janv. 12 09:13:13 loic-S301LP systemd[1]: Stopped SYSV: This script is used to start and stop the IDL network license manager..
~
~
~
~
~
~
~C'est quand même étrange qu'il dise ne pas trouver la licence, puisque le logiciel marche correctement... Et que la licence est à l'endroit indiqué.
Dois-je toujours supprimer le service?
Hors ligne
#11 Le 12/01/2017, à 15:31
- bruno
Re : [Résolu] dpkg - grub/IDL - problèmes de dépendance
Le retour de :
ls -l /usr/local/exelis/licenseMais le mieux serait de désactiver le service comme je l'ai indiqué en #9 et redémarrer la machine. Car je ne pense pas que tu aies besoins de « the IDL network license manager ».
Hors ligne
#12 Le 12/01/2017, à 15:36
- loixou29
Re : [Résolu] dpkg - grub/IDL - problèmes de dépendance
Voici le retour:
loic@loic-S301LP:~$ ls -l /usr/local/exelis/license
total 8
-rw-r--r-- 1 root root 1861 janv. 4 20:43 license.lic
-rw-r--r-- 1 root users 264 nov. 17 2015 readme.txtHors ligne
#13 Le 12/01/2017, à 16:37
- bruno
Re : [Résolu] dpkg - grub/IDL - problèmes de dépendance
Apparemment les droits en lecture sont bons, il faudrait vérifier que les dossiers parents sont bien r-x pour tout le monde…
Désactive ce service, de toute façon il ne fonctionne pas !
Hors ligne
#14 Le 12/01/2017, à 16:53
- loixou29
Re : [Résolu] dpkg - grub/IDL - problèmes de dépendance
Voilà le retour que j'obtiens lorsque j'essaye de le désactiver avec la commande que vous m'avez donnée en #9.
loic@loic-S301LP:~$ sudo update-rc.d -f sys5_idl_lmgrd remove
[sudo] Mot de passe de loic :
insserv: warning: script 'K01sys5_idl_lmgrd' missing LSB tags and overrides
insserv: warning: script 'sys5_idl_lmgrd' missing LSB tags and overrides
insserv: There is a loop at service plymouth if started
insserv: There is a loop between service plymouth and procps if started
insserv: loop involving service procps at depth 2
insserv: loop involving service udev at depth 1
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Max recursions depth 99 reached
insserv: loop involving service bluetooth at depth 1
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: There is a loop between service sys5_idl_lmgrd and hwclock if started
insserv: loop involving service hwclock at depth 1
insserv: There is a loop at service sys5_idl_lmgrd if started
insserv: There is a loop between service plymouth and urandom if started
insserv: loop involving service urandom at depth 4
insserv: loop involving service mountdevsubfs at depth 2
insserv: There is a loop between service sys5_idl_lmgrd and udev if started
insserv: loop involving service mountkernfs at depth 1
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: loop involving service checkroot at depth 4
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: There is a loop between service sys5_idl_lmgrd and dns-clean if started
insserv: loop involving service dns-clean at depth 1
insserv: Starting sys5_idl_lmgrd depends on plymouth and therefore on system facility `$all' which can not be true!Dernière modification par loixou29 (Le 12/01/2017, à 16:54)
Hors ligne
#15 Le 12/01/2017, à 17:07
- bruno
Re : [Résolu] dpkg - grub/IDL - problèmes de dépendance
Dans ce cas il va falloir faire cela à la main et supprimer tous les liens symboliques qui se trouvent dans les dossiers /etc/rc*.d/ (où * = 0,1,2,3,4,5,6,S). Autrement dit :
sudo rm /etc/rc0.d/K01sys5_idl_lmgrd
sudo rm /etc/rc1.d/K01sys5_idl_lmgrd
sudo rm /etc/rc2.d/K01sys5_idl_lmgrd
sudo rm /etc/rc3.d/K01sys5_idl_lmgrd
sudo rm /etc/rc4.d/K01sys5_idl_lmgrd
sudo rm /etc/rc5.d/K01sys5_idl_lmgrd
sudo rm /etc/rc6.d/K01sys5_idl_lmgrd
sudo rm /etc/rcS.d/S01sys5_idl_lmgrdCertains liens n'existent peut-être pas, mais au moins on est sûr de tout enlever.
Puis redémarrer l'ordinateur et refaire une tentative de mise à niveau.
Hors ligne
#16 Le 12/01/2017, à 17:32
- loixou29
Re : [Résolu] dpkg - grub/IDL - problèmes de dépendance
Aucun lien n'existe:
loic@loic-S301LP:~$ sudo rm /etc/rc0.d/K01sys5_idl_lmgrd
rm: impossible de supprimer '/etc/rc0.d/K01sys5_idl_lmgrd': Aucun fichier ou dossier de ce type
loic@loic-S301LP:~$ sudo rm /etc/rc1.d/K01sys5_idl_lmgrd
rm: impossible de supprimer '/etc/rc1.d/K01sys5_idl_lmgrd': Aucun fichier ou dossier de ce type
loic@loic-S301LP:~$ sudo rm /etc/rc2.d/K01sys5_idl_lmgrd
rm: impossible de supprimer '/etc/rc2.d/K01sys5_idl_lmgrd': Aucun fichier ou dossier de ce type
loic@loic-S301LP:~$ sudo rm /etc/rc3.d/K01sys5_idl_lmgrd
rm: impossible de supprimer '/etc/rc3.d/K01sys5_idl_lmgrd': Aucun fichier ou dossier de ce type
loic@loic-S301LP:~$ sudo rm /etc/rc4.d/K01sys5_idl_lmgrd
rm: impossible de supprimer '/etc/rc4.d/K01sys5_idl_lmgrd': Aucun fichier ou dossier de ce type
loic@loic-S301LP:~$ sudo rm /etc/rc5.d/K01sys5_idl_lmgrd
rm: impossible de supprimer '/etc/rc5.d/K01sys5_idl_lmgrd': Aucun fichier ou dossier de ce type
loic@loic-S301LP:~$ sudo rm /etc/rc6.d/K01sys5_idl_lmgrd
rm: impossible de supprimer '/etc/rc6.d/K01sys5_idl_lmgrd': Aucun fichier ou dossier de ce type
loic@loic-S301LP:~$ sudo rm /etc/rcS.d/S01sys5_idl_lmgrd
rm: impossible de supprimer '/etc/rcS.d/S01sys5_idl_lmgrd': Aucun fichier ou dossier de ce typeEt voulant vérifier ce que donnait un update/upgrade, le problème semble avoir disparu!
loic@loic-S301LP:~$ sudo apt-get upgrade
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Calcul de la mise à jour... Fait
Les paquets suivants seront mis à jour :
apt apt-transport-https apt-utils bind9-host dnsutils libapt-inst2.0
libapt-pkg5.0 libbind9-140 libdns-export162 libdns162 libisc-export160
libisc160 libisccc140 libisccfg140 liblwres141 libvncclient1
16 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
5 partiellement installés ou enlevés.
Il est nécessaire de prendre 4 234 ko dans les archives.
Après cette opération, 14,3 ko d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] o
Réception de:1 http://security.ubuntu.com/ubuntu xenial-security/main amd64 libisc-export160 amd64 1:9.10.3.dfsg.P4-8ubuntu1.4 [152 kB]
Réception de:2 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main amd64 libapt-pkg5.0 amd64 1.2.18 [707 kB]
Réception de:3 http://security.ubuntu.com/ubuntu xenial-security/main amd64 libdns-export162 amd64 1:9.10.3.dfsg.P4-8ubuntu1.4 [666 kB]
Réception de:4 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main amd64 libapt-inst2.0 amd64 1.2.18 [55,6 kB]
Réception de:5 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main amd64 apt amd64 1.2.18 [1 042 kB]
Réception de:6 http://security.ubuntu.com/ubuntu xenial-security/main amd64 dnsutils amd64 1:9.10.3.dfsg.P4-8ubuntu1.4 [88,8 kB]
Réception de:7 http://security.ubuntu.com/ubuntu xenial-security/main amd64 bind9-host amd64 1:9.10.3.dfsg.P4-8ubuntu1.4 [38,3 kB]
Réception de:8 http://security.ubuntu.com/ubuntu xenial-security/main amd64 libisc160 amd64 1:9.10.3.dfsg.P4-8ubuntu1.4 [214 kB]
Réception de:9 http://security.ubuntu.com/ubuntu xenial-security/main amd64 libdns162 amd64 1:9.10.3.dfsg.P4-8ubuntu1.4 [881 kB]
Réception de:10 http://security.ubuntu.com/ubuntu xenial-security/main amd64 libisccc140 amd64 1:9.10.3.dfsg.P4-8ubuntu1.4 [16,3 kB]
Réception de:11 http://security.ubuntu.com/ubuntu xenial-security/main amd64 libisccfg140 amd64 1:9.10.3.dfsg.P4-8ubuntu1.4 [40,5 kB]
Réception de:12 http://security.ubuntu.com/ubuntu xenial-security/main amd64 liblwres141 amd64 1:9.10.3.dfsg.P4-8ubuntu1.4 [33,2 kB]
Réception de:13 http://security.ubuntu.com/ubuntu xenial-security/main amd64 libbind9-140 amd64 1:9.10.3.dfsg.P4-8ubuntu1.4 [23,6 kB]
Réception de:14 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main amd64 apt-utils amd64 1.2.18 [196 kB]
Réception de:15 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main amd64 apt-transport-https amd64 1.2.18 [26,0 kB]
Réception de:16 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main amd64 libvncclient1 amd64 0.9.10+dfsg-3ubuntu0.16.04.1 [54,3 kB]
4 234 ko réceptionnés en 1s (3 129 ko/s)
(Lecture de la base de données... 232186 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../libapt-pkg5.0_1.2.18_amd64.deb ...
Dépaquetage de libapt-pkg5.0:amd64 (1.2.18) sur (1.2.15ubuntu0.2) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.23-0ubuntu5) ...
Paramétrage de libapt-pkg5.0:amd64 (1.2.18) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.23-0ubuntu5) ...
(Lecture de la base de données... 232186 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../libapt-inst2.0_1.2.18_amd64.deb ...
Dépaquetage de libapt-inst2.0:amd64 (1.2.18) sur (1.2.15ubuntu0.2) ...
Préparation du dépaquetage de .../archives/apt_1.2.18_amd64.deb ...
Dépaquetage de apt (1.2.18) sur (1.2.15ubuntu0.2) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.23-0ubuntu5) ...
Traitement des actions différées (« triggers ») pour man-db (2.7.5-1) ...
Paramétrage de apt (1.2.18) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.23-0ubuntu5) ...
(Lecture de la base de données... 232186 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../apt-utils_1.2.18_amd64.deb ...
Dépaquetage de apt-utils (1.2.18) sur (1.2.15ubuntu0.2) ...
Préparation du dépaquetage de .../libisc-export160_1%3a9.10.3.dfsg.P4-8ubuntu1.4_amd64.deb ...
Dépaquetage de libisc-export160 (1:9.10.3.dfsg.P4-8ubuntu1.4) sur (1:9.10.3.dfsg.P4-8ubuntu1.3) ...
Préparation du dépaquetage de .../libdns-export162_1%3a9.10.3.dfsg.P4-8ubuntu1.4_amd64.deb ...
Dépaquetage de libdns-export162 (1:9.10.3.dfsg.P4-8ubuntu1.4) sur (1:9.10.3.dfsg.P4-8ubuntu1.3) ...
Préparation du dépaquetage de .../apt-transport-https_1.2.18_amd64.deb ...
Dépaquetage de apt-transport-https (1.2.18) sur (1.2.15ubuntu0.2) ...
Préparation du dépaquetage de .../dnsutils_1%3a9.10.3.dfsg.P4-8ubuntu1.4_amd64.deb ...
Dépaquetage de dnsutils (1:9.10.3.dfsg.P4-8ubuntu1.4) sur (1:9.10.3.dfsg.P4-8ubuntu1.3) ...
Préparation du dépaquetage de .../bind9-host_1%3a9.10.3.dfsg.P4-8ubuntu1.4_amd64.deb ...
Dépaquetage de bind9-host (1:9.10.3.dfsg.P4-8ubuntu1.4) sur (1:9.10.3.dfsg.P4-8ubuntu1.3) ...
Préparation du dépaquetage de .../libisc160_1%3a9.10.3.dfsg.P4-8ubuntu1.4_amd64.deb ...
Dépaquetage de libisc160:amd64 (1:9.10.3.dfsg.P4-8ubuntu1.4) sur (1:9.10.3.dfsg.P4-8ubuntu1.3) ...
Préparation du dépaquetage de .../libdns162_1%3a9.10.3.dfsg.P4-8ubuntu1.4_amd64.deb ...
Dépaquetage de libdns162:amd64 (1:9.10.3.dfsg.P4-8ubuntu1.4) sur (1:9.10.3.dfsg.P4-8ubuntu1.3) ...
Préparation du dépaquetage de .../libisccc140_1%3a9.10.3.dfsg.P4-8ubuntu1.4_amd64.deb ...
Dépaquetage de libisccc140:amd64 (1:9.10.3.dfsg.P4-8ubuntu1.4) sur (1:9.10.3.dfsg.P4-8ubuntu1.3) ...
Préparation du dépaquetage de .../libisccfg140_1%3a9.10.3.dfsg.P4-8ubuntu1.4_amd64.deb ...
Dépaquetage de libisccfg140:amd64 (1:9.10.3.dfsg.P4-8ubuntu1.4) sur (1:9.10.3.dfsg.P4-8ubuntu1.3) ...
Préparation du dépaquetage de .../liblwres141_1%3a9.10.3.dfsg.P4-8ubuntu1.4_amd64.deb ...
Dépaquetage de liblwres141:amd64 (1:9.10.3.dfsg.P4-8ubuntu1.4) sur (1:9.10.3.dfsg.P4-8ubuntu1.3) ...
Préparation du dépaquetage de .../libbind9-140_1%3a9.10.3.dfsg.P4-8ubuntu1.4_amd64.deb ...
Dépaquetage de libbind9-140:amd64 (1:9.10.3.dfsg.P4-8ubuntu1.4) sur (1:9.10.3.dfsg.P4-8ubuntu1.3) ...
Préparation du dépaquetage de .../libvncclient1_0.9.10+dfsg-3ubuntu0.16.04.1_amd64.deb ...
Dépaquetage de libvncclient1:amd64 (0.9.10+dfsg-3ubuntu0.16.04.1) sur (0.9.10+dfsg-3build1) ...
Traitement des actions différées (« triggers ») pour man-db (2.7.5-1) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.23-0ubuntu5) ...
Paramétrage de grub-common (2.02~beta2-36ubuntu3.6) ...
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
insserv: warning: script 'sys5_idl_lmgrd' missing LSB tags and overrides
Paramétrage de grub2-common (2.02~beta2-36ubuntu3.6) ...
Paramétrage de grub-efi-amd64-bin (2.02~beta2-36ubuntu3.6) ...
Paramétrage de grub-efi-amd64 (2.02~beta2-36ubuntu3.6) ...
Creating config file /etc/default/grub with new version
Installation pour la plate-forme x86_64-efi
Installation terminée, sans erreur.
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-4.4.0-59-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-59-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-57-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-57-generic
Windows Boot Manager trouvé sur /dev/sda1@/EFI/Microsoft/Boot/bootmgfw.efi
Adding boot menu entry for EFI firmware configuration
fait
Paramétrage de grub-efi (2.02~beta2-36ubuntu3.6) ...
Paramétrage de libapt-inst2.0:amd64 (1.2.18) ...
Paramétrage de apt-utils (1.2.18) ...
Paramétrage de libisc-export160 (1:9.10.3.dfsg.P4-8ubuntu1.4) ...
Paramétrage de libdns-export162 (1:9.10.3.dfsg.P4-8ubuntu1.4) ...
Paramétrage de apt-transport-https (1.2.18) ...
Paramétrage de libisc160:amd64 (1:9.10.3.dfsg.P4-8ubuntu1.4) ...
Paramétrage de libdns162:amd64 (1:9.10.3.dfsg.P4-8ubuntu1.4) ...
Paramétrage de libisccc140:amd64 (1:9.10.3.dfsg.P4-8ubuntu1.4) ...
Paramétrage de libisccfg140:amd64 (1:9.10.3.dfsg.P4-8ubuntu1.4) ...
Paramétrage de libbind9-140:amd64 (1:9.10.3.dfsg.P4-8ubuntu1.4) ...
Paramétrage de liblwres141:amd64 (1:9.10.3.dfsg.P4-8ubuntu1.4) ...
Paramétrage de bind9-host (1:9.10.3.dfsg.P4-8ubuntu1.4) ...
Paramétrage de dnsutils (1:9.10.3.dfsg.P4-8ubuntu1.4) ...
Paramétrage de libvncclient1:amd64 (0.9.10+dfsg-3ubuntu0.16.04.1) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.23-0ubuntu5) ...Le logiciel semble toujours marcher correctement. Je vous remercie de tout coeur. Néanmoins, j'aimerai savoir ce qui l'a fait marcher. Le fait d'arréter le processus en #4?
PS: il y a quand même ces morceaux, que signifient-ils?
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
insserv: warning: script 'sys5_idl_lmgrd' missing LSB tags and overrideset
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.Dernière modification par loixou29 (Le 12/01/2017, à 17:35)
Hors ligne
#17 Le 12/01/2017, à 17:36
- bruno
Re : [Résolu] dpkg - grub/IDL - problèmes de dépendance
La commande lancée en #14 a du fonctionner malgré les messages d'avertissement, ce qui explique qu'ensuite les commandes de suppression des leins indiquaient qu'aucun fichier n'existait.
C'est cette commande qui a désactivé le service et a permis aux mises à jour de fonctionner à nouveau
Hors ligne
#18 Le 12/01/2017, à 17:39
- loixou29
Re : [Résolu] dpkg - grub/IDL - problèmes de dépendance
Merci à vous tous, et en particulier à toi Bruno.
Je vous souhaite de passer une agréable fin de journée!
Hors ligne
#19 Le 12/01/2017, à 17:55
- bruno
Re : [Résolu] dpkg - grub/IDL - problèmes de dépendance
Avec plaisir 
Pense à modifier ton premier message pour mettre [Résolu] devant le titre
Hors ligne
#20 Le 12/01/2017, à 21:36
- melixgaro
Re : [Résolu] dpkg - grub/IDL - problèmes de dépendance
salut,
en passant, je signale qu'il y a GDL (paquet gdl) qui peut dans certains cas être un très bon équivalent à IDL
Linux depuis ~2007. Xubuntu seulement.
Hors ligne