Pages : 1
#1 Le 14/01/2017, à 01:02
- hazardomadaire
[résolu] Problème boot : acpi et busybox
[résolution : l'ordi ne plante plus au démarrage grâce à boot-repair mais le message d'erreur demeure.]
Bonsoir à tous,
je cherche depuis un moment sur le forum comment redémarrer mon ordi mais je ne trouve pas la solution à mon problème.
Tout a commencé après que j'ai laissé l'ordi en veille un moment. Quand je l'ai rallumé, il s'est éteint tout seul brutalement.
Au redémarrage, il me propose d'abord le grub puis quand je choisi ubuntu il indique :
fail to fin handle for acpi object /_SB.PVI0.SDMA
fail to fin handle for acpi object /_SB.PVI0.SDHC
busybox v1.22.1 (ubuntu 1:1.22.0-15 ubuntu 1) buit-in shell (ash)
Là j'ai démarré l'ordi sur un live-usb depuis lequel j'ai fait un boot-info dont voici le lien : http://paste2.org/nIbpbcp8
Je remercie a l'avance toute personne qui pourra m'aider sachant que je suis très débutant.
D
Dernière modification par hazardomadaire (Le 29/01/2017, à 03:02)
Description technique
ASUSTeK COMPUTER INC. UX310UA
Ubuntu 22.04.3 LTS, 64 bits, Gnome 42.9, Sys fenêtrage Xorg
Hors ligne
#2 Le 14/01/2017, à 10:11
- moko138
Re : [résolu] Problème boot : acpi et busybox
Dans ton boot-info que voici :
Boot Info Script cfd9efe + Boot-Repair extra info [Boot-Info 26Apr2016]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> No known boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Mounting failed: mount: mount /dev/sda1 on /mnt/BootInfo/sda1 failed: Structure needs cleaning
sda2: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: mount /dev/sda1 on /mnt/BootInfo/sda1 failed: Structure needs cleaning
mount: unknown filesystem type ''
sdb1: __________________________________________________________________________
File system: iso9660
Boot sector type: Unknown
Boot sector info:
Mounting failed: mount: mount /dev/sda1 on /mnt/BootInfo/sda1 failed: Structure needs cleaning
mount: unknown filesystem type ''
mount: /dev/sdb1 is already mounted or /mnt/BootInfo/sdb1 busy
sdb2: __________________________________________________________________________
File system: vfat
Boot sector type: FAT16
Boot sector info: According to the info in the boot sector, sdb2 starts
at sector 0. But according to the info from fdisk,
sdb2 starts at sector 2927216. According to the info
in the boot sector, sdb2 has 0 sectors.
Mounting failed: mount: mount /dev/sda1 on /mnt/BootInfo/sda1 failed: Structure needs cleaning
mount: unknown filesystem type ''
mount: /dev/sdb1 is already mounted or /mnt/BootInfo/sdb1 busy
mount: /dev/sdb2 is already mounted or /mnt/BootInfo/sdb2 busy
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 246,163,455 246,161,408 83 Linux
/dev/sda2 246,163,456 250,068,991 3,905,536 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 3.8 GiB, 4009754624 bytes, 7831552 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 0 2,955,679 2,955,680 0 Empty
/dev/sdb2 2,927,216 2,931,951 4,736 ef EFI (FAT-12/16/32)
/dev/sdb1 overlaps with /dev/sdb2
GUID Partition Table detected, but does not seem to be used.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdb1 + R 0 2,955,623 2,955,624 Data partition (Windows/Linux)
/dev/sdb2 + R 2,927,216 2,931,951 4,736 Data partition (Windows/Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc ext4
/dev/sda2
/dev/sdb1 2016-07-19-21-27-51-00 iso9660 Ubuntu 16.04.1 LTS amd64
/dev/sdb2 0F7B-9366 vfat
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jan 13 22:40 ata-ADATA_SP900NS38_2E3720030777 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 13 22:40 ata-ADATA_SP900NS38_2E3720030777-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 13 22:40 ata-ADATA_SP900NS38_2E3720030777-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 Jan 13 22:40 usb-Lexar_JD_FireFly_XX79CVFPIQH9NQMRZTHO-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 13 22:40 usb-Lexar_JD_FireFly_XX79CVFPIQH9NQMRZTHO-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 13 22:40 usb-Lexar_JD_FireFly_XX79CVFPIQH9NQMRZTHO-0:0-part2 -> ../../sdb2
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb /cdrom iso9660 (ro,noatime)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown MBR on /dev/sdb
00000000 45 52 08 00 00 00 90 90 00 00 00 00 00 00 00 00 |ER..............|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020 33 ed fa 8e d5 bc 00 7c fb fc 66 31 db 66 31 c9 |3......|..f1.f1.|
00000030 66 53 66 51 06 57 8e dd 8e c5 52 be 00 7c bf 00 |fSfQ.W....R..|..|
00000040 06 b9 00 01 f3 a5 ea 4b 06 00 00 52 b4 41 bb aa |.......K...R.A..|
00000050 55 31 c9 30 f6 f9 cd 13 72 16 81 fb 55 aa 75 10 |U1.0....r...U.u.|
00000060 83 e1 01 74 0b 66 c7 06 f1 06 b4 42 eb 15 eb 00 |...t.f.....B....|
00000070 5a 51 b4 08 cd 13 83 e1 3f 5b 51 0f b6 c6 40 50 |ZQ......?[Q...@P|
00000080 f7 e1 53 52 50 bb 00 7c b9 04 00 66 a1 b0 07 e8 |..SRP..|...f....|
00000090 44 00 0f 82 80 00 66 40 80 c7 02 e2 f2 66 81 3e |D.....f@.....f.>|
000000a0 40 7c fb c0 78 70 75 09 fa bc ec 7b ea 44 7c 00 |@|..xpu....{.D|.|
000000b0 00 e8 83 00 69 73 6f 6c 69 6e 75 78 2e 62 69 6e |....isolinux.bin|
000000c0 20 6d 69 73 73 69 6e 67 20 6f 72 20 63 6f 72 72 | missing or corr|
000000d0 75 70 74 2e 0d 0a 66 60 66 31 d2 66 03 06 f8 7b |upt...f`f1.f...{|
000000e0 66 13 16 fc 7b 66 52 66 50 06 53 6a 01 6a 10 89 |f...{fRfP.Sj.j..|
000000f0 e6 66 f7 36 e8 7b c0 e4 06 88 e1 88 c5 92 f6 36 |.f.6.{.........6|
00000100 ee 7b 88 c6 08 e1 41 b8 01 02 8a 16 f2 7b cd 13 |.{....A......{..|
00000110 8d 64 10 66 61 c3 e8 1e 00 4f 70 65 72 61 74 69 |.d.fa....Operati|
00000120 6e 67 20 73 79 73 74 65 6d 20 6c 6f 61 64 20 65 |ng system load e|
00000130 72 72 6f 72 2e 0d 0a 5e ac b4 0e 8a 3e 62 04 b3 |rror...^....>b..|
00000140 07 cd 10 3c 0a 75 f1 cd 18 f4 eb fd 00 00 00 00 |...<.u..........|
00000150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000160 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001b0 fc 85 2c 00 00 00 00 00 e7 63 a8 40 00 00 80 00 |..,......c.@....|
000001c0 01 00 00 5a e0 f6 00 00 00 00 a0 19 2d 00 00 fe |...Z........-...|
000001d0 ff ff ef fe ff ff 70 aa 2c 00 80 12 00 00 00 00 |......p.,.......|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
/dev/sdb1: unknown GPT attributes
1000000000000001
/dev/sdb2: unknown GPT attributes
1000000000000001
Unknown BootLoader on sdb1
00000000 45 52 08 00 00 00 90 90 00 00 00 00 00 00 00 00 |ER..............|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020 33 ed fa 8e d5 bc 00 7c fb fc 66 31 db 66 31 c9 |3......|..f1.f1.|
00000030 66 53 66 51 06 57 8e dd 8e c5 52 be 00 7c bf 00 |fSfQ.W....R..|..|
00000040 06 b9 00 01 f3 a5 ea 4b 06 00 00 52 b4 41 bb aa |.......K...R.A..|
00000050 55 31 c9 30 f6 f9 cd 13 72 16 81 fb 55 aa 75 10 |U1.0....r...U.u.|
00000060 83 e1 01 74 0b 66 c7 06 f1 06 b4 42 eb 15 eb 00 |...t.f.....B....|
00000070 5a 51 b4 08 cd 13 83 e1 3f 5b 51 0f b6 c6 40 50 |ZQ......?[Q...@P|
00000080 f7 e1 53 52 50 bb 00 7c b9 04 00 66 a1 b0 07 e8 |..SRP..|...f....|
00000090 44 00 0f 82 80 00 66 40 80 c7 02 e2 f2 66 81 3e |D.....f@.....f.>|
000000a0 40 7c fb c0 78 70 75 09 fa bc ec 7b ea 44 7c 00 |@|..xpu....{.D|.|
000000b0 00 e8 83 00 69 73 6f 6c 69 6e 75 78 2e 62 69 6e |....isolinux.bin|
000000c0 20 6d 69 73 73 69 6e 67 20 6f 72 20 63 6f 72 72 | missing or corr|
000000d0 75 70 74 2e 0d 0a 66 60 66 31 d2 66 03 06 f8 7b |upt...f`f1.f...{|
000000e0 66 13 16 fc 7b 66 52 66 50 06 53 6a 01 6a 10 89 |f...{fRfP.Sj.j..|
000000f0 e6 66 f7 36 e8 7b c0 e4 06 88 e1 88 c5 92 f6 36 |.f.6.{.........6|
00000100 ee 7b 88 c6 08 e1 41 b8 01 02 8a 16 f2 7b cd 13 |.{....A......{..|
00000110 8d 64 10 66 61 c3 e8 1e 00 4f 70 65 72 61 74 69 |.d.fa....Operati|
00000120 6e 67 20 73 79 73 74 65 6d 20 6c 6f 61 64 20 65 |ng system load e|
00000130 72 72 6f 72 2e 0d 0a 5e ac b4 0e 8a 3e 62 04 b3 |rror...^....>b..|
00000140 07 cd 10 3c 0a 75 f1 cd 18 f4 eb fd 00 00 00 00 |...<.u..........|
00000150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001b0 fc 85 2c 00 00 00 00 00 e7 63 a8 40 00 00 80 00 |..,......c.@....|
000001c0 01 00 00 5a e0 f6 00 00 00 00 a0 19 2d 00 00 fe |...Z........-...|
000001d0 ff ff ef fe ff ff 70 aa 2c 00 80 12 00 00 00 00 |......p.,.......|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/10960/mounts) leaked on lvs invocation. Parent PID 17320: bash
File descriptor 63 (pipe:[68451]) leaked on lvs invocation. Parent PID 17320: bash
ADDITIONAL INFORMATION :
=================== log of boot-info 2017-01-13__22h40 ===================
boot-info version : 4ppa40
boot-sav version : 4ppa40
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa40
grub-probe : erreur : impossible de trouver un périphérique GRUB pour /dev/sdb1. Vérifiez device.map..
Warning: The driver descriptor says the physical block size is 2048 bytes, but Linux says it is 512 bytes.
Warning: The driver descriptor says the physical block size is 2048 bytes, but Linux says it is 512 bytes.
boot-info is executed in live-session (Ubuntu 16.04.1 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash --- maybe-ubiquity
ls: impossible d'accéder à '/home/usr/.config': Aucun fichier ou dossier de ce type
mount: mount /dev/sda1 on /mnt/boot-sav/sda1 failed: La structure a besoin d'un nettoyage
mount /dev/sda1 : Error code 32
mount -r /dev/sda1 /mnt/boot-sav/sda1
mount: mount /dev/sda1 on /mnt/boot-sav/sda1 failed: La structure a besoin d'un nettoyage
mount -r /dev/sda1 : Error code 32
mount: /dev/sdb2 is already mounted or /mnt/boot-sav/sdb2 busy
mount /dev/sdb2 : Error code 32
mount -r /dev/sdb2 /mnt/boot-sav/sdb2
mount: /dev/sdb2 is already mounted or /mnt/boot-sav/sdb2 busy
mount -r /dev/sdb2 : Error code 32
mount: /dev/sda2 is write-protected, mounting read-only
NTFS signature is missing.
Failed to mount '/dev/sda2': Argument invalide
The device '/dev/sda2' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount /dev/sda2 : Error code 12
mount -r /dev/sda2 /mnt/boot-sav/sda2
NTFS signature is missing.
Failed to mount '/dev/sda2': Argument invalide
The device '/dev/sda2' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount -r /dev/sda2 : Error code 12
=================== os-prober:
/dev/sda1:Ubuntu 16.04.1 LTS (16.04):Ubuntu:linux
=================== blkid:
/dev/sda1: UUID="b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc" TYPE="ext4" PARTUUID="00036312-01"
/dev/loop0: TYPE="squashfs"
/dev/sdb1: UUID="2016-07-19-21-27-51-00" LABEL="Ubuntu 16.04.1 LTS amd64" TYPE="iso9660" PTUUID="40a863e7" PTTYPE="dos" PARTUUID="40a863e7-01"
/dev/sdb2: SEC_TYPE="msdos" UUID="0F7B-9366" TYPE="vfat" PARTUUID="40a863e7-02"
/dev/sda2: PARTUUID="00036312-02"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
mount: mount /dev/sda1 on /mnt/boot-sav/sda1 failed: La structure a besoin d'un nettoyage
mount /dev/sda1 : Error code 32
mount -r /dev/sda1 /mnt/boot-sav/sda1
mount: mount /dev/sda1 on /mnt/boot-sav/sda1 failed: La structure a besoin d'un nettoyage
mount -r /dev/sda1 : Error code 32
mount: /dev/sdb2 is already mounted or /mnt/boot-sav/sdb2 busy
mount /dev/sdb2 : Error code 32
mount -r /dev/sdb2 /mnt/boot-sav/sdb2
mount: /dev/sdb2 is already mounted or /mnt/boot-sav/sdb2 busy
mount -r /dev/sdb2 : Error code 32
mount: /dev/sda2 is write-protected, mounting read-only
NTFS signature is missing.
Failed to mount '/dev/sda2': Argument invalide
The device '/dev/sda2' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount /dev/sda2 : Error code 12
mount -r /dev/sda2 /mnt/boot-sav/sda2
NTFS signature is missing.
Failed to mount '/dev/sda2': Argument invalide
The device '/dev/sda2' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount -r /dev/sda2 : Error code 12
dd: invalid number: «0»
Warning: /var/log/boot-sav/log/2017-01-13__22h40boot-info02/sdb/current_mbr.img could not be created. Veuillez indiquer ce message à [email protected]
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
EFI in dmesg.
[ 0.000000] ACPI: UEFI 0x00000000DC72E0F8 000042 (v01 00000000 00000000)
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1.
sdb2 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sdb2.
sda2 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, usb-disk, no-os, 0 sectors * 512 bytes
=================== parted -l:
Model: ATA ADATA SP900NS38 (scsi)
Disk /dev/sda: 128GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 126GB 126GB primary ext4 boot
2 126GB 128GB 2000MB primary
Model: Lexar JD FireFly (scsi)
Disk /dev/sdb: 4010MB
Sector size (logical/physical): 512B/512B
Partition Table: unknown
Disk Flags:
=================== parted -lm:
BYT;
/dev/sda:128GB:scsi:512:512:msdos:ATA ADATA SP900NS38:;
1:1049kB:126GB:126GB:ext4::boot;
2:126GB:128GB:2000MB:::;
BYT;
/dev/sdb:4010MB:scsi:512:512:unknown:Lexar JD FireFly:;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 119,2G
sda1 part ext4 117,4G
sda2 part 1,9G
sdb disk iso9660 3,8G Ubuntu 16.04.1 LTS amd64
sdb1 part iso9660 1,4G Ubuntu 16.04.1 LTS amd64
sdb2 part vfat 2,3M Ubuntu 16.04.1 LTS amd64
loop0 loop squashfs 1,4G
KNAME ROTA RO RM STATE MOUNTPOINT
sda 0 0 0 running
sda1 0 0 0
sda2 0 0 0
sdb 1 0 1 running /cdrom
sdb1 1 0 1
sdb2 1 0 1
loop0 1 1 0 /rofs
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=4030276k,nr_inodes=1007569,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=808984k,mode=755)
/dev/sdb on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=29,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=808984k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 sdb2 size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sdb sdb1 sdb2 sg0 sg1 shm snapshot snd stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sdb2
00000000 eb 3c 90 6d 6b 66 73 2e 66 61 74 00 02 04 01 00 |.<.mkfs.fat.....|
00000010 02 00 02 80 12 f8 04 00 20 00 40 00 00 00 00 00 |........ .@.....|
00000020 00 00 00 00 80 00 29 66 93 7b 0f 4e 4f 20 4e 41 |......)f.{.NO NA|
00000030 4d 45 20 20 20 20 46 41 54 31 32 20 20 20 0e 1f |ME FAT12 ..|
00000040 be 5b 7c ac 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 |.[|.".t.V.......|
00000050 5e eb f0 32 e4 cd 16 cd 19 eb fe 54 68 69 73 20 |^..2.......This |
00000060 69 73 20 6e 6f 74 20 61 20 62 6f 6f 74 61 62 6c |is not a bootabl|
00000070 65 20 64 69 73 6b 2e 20 20 50 6c 65 61 73 65 20 |e disk. Please |
00000080 69 6e 73 65 72 74 20 61 20 62 6f 6f 74 61 62 6c |insert a bootabl|
00000090 65 20 66 6c 6f 70 70 79 20 61 6e 64 0d 0a 70 72 |e floppy and..pr|
000000a0 65 73 73 20 61 6e 79 20 6b 65 79 20 74 6f 20 74 |ess any key to t|
000000b0 72 79 20 61 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 |ry again ... ...|
000000c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs tmpfs 791M 9.4M 781M 2% /run
/dev/sdb iso9660 1.5G 1.5G 0 100% /cdrom
/dev/loop0 squashfs 1.4G 1.4G 0 100% /rofs
/cow overlay 3.9G 109M 3.8G 3% /
tmpfs tmpfs 3.9G 340K 3.9G 1% /dev/shm
tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock
tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
tmpfs tmpfs 3.9G 296K 3.9G 1% /tmp
tmpfs tmpfs 791M 72K 790M 1% /run/user/999
=================== fdisk -l:
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/loop0: 1.4 GiB, 1459982336 bytes, 2851528 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00036312
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 246163455 246161408 117.4G 83 Linux
/dev/sda2 246163456 250068991 3905536 1.9G 82 Linux swap / Solaris
Disk /dev/sdb: 3.8 GiB, 4009754624 bytes, 7831552 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x40a863e7
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 0 2955679 2955680 1.4G 0 Empty
/dev/sdb2 2927216 2931951 4736 2.3M ef EFI (FAT-12/16/32)
No OS or WinEFI system
gui-tab-other.sh: ligne 93: _checkbutton_repairfilesystems : commande introuvable
=================== Suggested repair
The default repair of the Boot-Repair utility would not act on the MBR.
The boot flag would be placed on sdb2.
Additional repair would be performed: repair-filesystems
=================== User settings
The settings chosen by the user will not act on the boot.
paste.ubuntu.com ko (), using paste.debian
paste.debian.net ko (), using paste2on voit que ta racine n'a pu être montée :
mount: mount /dev/sda1 on /mnt/boot-sav/sda1 failed: La structure a besoin d'un nettoyage- -
D'abord contrôler l'usure du disque :
En session live :
a) Installer l'utilitaire :
sudo apt-get install --no-install-recommends smartmontoolsb) Repérer la lettre X exacte attribuée au disque /dev/sdX (elle peut changer entre deux branchements ou démarrages) :
sudo parted -l(c'est un L minuscule).
c) Lire les données SMART :
en remplaçant X par la lettre trouvée précédemment, faire sans ajouter de chiffre :
sudo smartctl -s on -a /dev/sdXet en donner le retour complet et entre balises-code.
- -
Ensuite, si le disque est sain, et seulement dans ce cas,
il sera temps de faire un fsck sur sdX1.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#3 Le 17/01/2017, à 02:23
- hazardomadaire
Re : [résolu] Problème boot : acpi et busybox
Merci Moko138 et désolé de ne pas avoir réagi plus tôt.
En fait après avoir posté, j'ai lancé boot-repair depuis une session live, suivi les instructions et depuis l'ordi ne plante plus au démarrage.
En revanche, il me propose systématiquement le grub avec soit unbutu soit mode avancé.
Qu'en penses-tu ?
Penses-tu toujours que mon disque dur n'est plus saint ?
Est-il toujours utile que je suive la procédure que tu m'indiques ?
Encore merci.
Description technique
ASUSTeK COMPUTER INC. UX310UA
Ubuntu 22.04.3 LTS, 64 bits, Gnome 42.9, Sys fenêtrage Xorg
Hors ligne
#4 Le 17/01/2017, à 02:52
- moko138
Re : [résolu] Problème boot : acpi et busybox
hazardomadaire a écrit :
il me propose systématiquement le grub avec soit unbutu soit mode avancé.
Qu'en penses-tu ?
Normal.
Est-il toujours utile que je suive la procédure que tu m'indiques ?
Oui.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#5 Le 20/01/2017, à 07:39
- moko138
Re : [résolu] Problème boot : acpi et busybox
Allô !!!
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#6 Le 21/01/2017, à 22:17
- hazardomadaire
Re : [résolu] Problème boot : acpi et busybox
ça y est je suis de retour ! Et j'ai suivi la procédure que tu m'as indiquée.
Avant de t'en donner le retour complet, je veux bien savoir pourquoi maintenant au démarrage, le grub s'affiche alors qu'auparavant ce n'était pas le cas. Déjà merci pour la réponse à cette question de débutant 
.
Sur la procédure pour savoir si le disque est sain, ça ne s'est pas passé exactement comme tu l'avais indiqué mais je pense que j'ai quand même réussi à obtenir le "retour complet" nécessaire.
J'ai facilement installé l'utilitaire et trouvé la lettre attachée à mon disque (a) mais quand j'ai fait la commande
sudo parted -lJ'ai obtenu le résultat suivant
Modèle: ATA ADATA SP900NS38 (scsi)
Disque /dev/sda : 128GB
Taille des secteurs (logiques/physiques): 512B/512B
Table de partitions : msdos
Disk Flags:
Numéro Début Fin Taille Type Système de fichiers Fanions
1 1049kB 126GB 126GB primary ext4 démarrage
2 126GB 128GB 2000MB primary
Avertissement: Le descripteur du pilote indique une taille physique de bloc de
2048 octets, mais Linux lui indique 512 octets.
Ignorer/Ignore/Annuler/Cancel?A la question posée, j'ai répondu au hasard :
IgnorerCe à quoi, il m'a été répondu
Modèle: Lexar JD FireFly (scsi)
Disque /dev/sdb : 16,0GB
Taille des secteurs (logiques/physiques): 2048B/512B
Table de partitions : mac
Disk Flags:
Numéro Début Fin Taille Système de fichiers Nom Fanions
1 2048B 6143B 4096B Apple
2 1499MB 1501MB 2425kB EFIJ'ai ensuite repris la procédure comme tu me l'avais indiqué en entrant
sudo smartctl -s on -a /dev/sdaet je pense avoir obtenu le retour complet demandé :
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-31-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ADATA SP900NS38
Serial Number: 2E3720030777
LU WWN Device Id: 0 000000 000000000
Firmware Version: 5.6.0
User Capacity: 128 035 676 160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Jan 21 19:56:28 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7d) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0025) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0032 120 120 050 Old_age Always - 0
5 Reallocated_Sector_Ct 0x0033 094 094 003 Pre-fail Always - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1274 (58 160 0)
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2475
171 Unknown_Attribute 0x000a 100 100 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 56
177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 95
181 Program_Fail_Cnt_Total 0x000a 100 100 000 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 000 Old_age Always - 0
187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 037 063 000 Old_age Always - 37 (Min/Max 8/63)
195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline - 0
196 Reallocated_Event_Count 0x0033 094 094 003 Pre-fail Always - 0
201 Unknown_SSD_Attribute 0x001c 120 120 000 Old_age Offline - 0
204 Soft_ECC_Correction 0x001c 120 120 000 Old_age Offline - 0
230 Unknown_SSD_Attribute 0x0013 100 100 000 Pre-fail Always - 100
231 Temperature_Celsius 0x0013 098 098 010 Pre-fail Always - 4294967296
233 Media_Wearout_Indicator 0x0032 000 000 000 Old_age Always - 20122
234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 2017
241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 2017
242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 3194
SMART Error Log not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1250 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Alors, verdict ? Disque sain ou pas ? c'est quoi la suite ?
Un grand merci.
Description technique
ASUSTeK COMPUTER INC. UX310UA
Ubuntu 22.04.3 LTS, 64 bits, Gnome 42.9, Sys fenêtrage Xorg
Hors ligne
#7 Le 21/01/2017, à 23:12
- moko138
Re : [résolu] Problème boot : acpi et busybox
hazardomadaire a écrit :
pourquoi maintenant au démarrage, le grub s'affiche alors qu'auparavant ce n'était pas le cas
Parce que la 2nde et plus grosse partie de ton grub est dans sda1
et que sda1 était en vrac, illisible :
sda1 failed: Structure needs cleaning
mount: unknown filesystem type ''Entre-temps, un fsck a été lancé automatiquement, qui a remis le FS (= système de fichiers) de sda1 d'aplomb.
Ton SSD est sain mais
194 Temperature_Celsius 0x0022 037 063 000 37 (Min/Max 8/63)il a grimpé à 63°C. C'est énorme.
À éviter désormais.
D'autre part, ton disque est jeune (1274 heures).
9 Power_On_Hours 0x0032 099 099 000 1274 (58 160 0)Mais si tu continues de l'allumer pour des sessions de 30 minutes (1274 h / 2475 allumages),
12 Power_Cycle_Count 0x0032 098 098 000 2475c'est son électronique que tu vas flinguer avant l'heure.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#8 Le 21/01/2017, à 23:30
- hazardomadaire
Re : [résolu] Problème boot : acpi et busybox
Bon merci, content de savoir que le disque est sain.
Mais le grub continue de s'afficher au démarrage alors que d'après ce que je comprends de ce que tu dis ça ne devrait plus être le cas, non ?
moko138 a écrit :
il a grimpé à 63°C. C'est énorme.
Sais-tu pourquoi la température a tellement monté ? Est-lié au disque qui était illisible ou peut-être que j'utilise mal mon ordi ?
moko138 a écrit :
Mais si tu continues de l'allumer pour des sessions de 30 minutes (1274 h / 2475 allumages),
Veux-tu dire qu'il faut allumer/éteindre l'ordi le moins possible?
Autre chose, si je peux me permettre.
Au démarrage j'ai parfois (et c'est le cas en ce moment) une fenêtre s'affiche avec écrit : problème logiciel détecté
Elle contient un bouton annuler ou signaler. J'appuie sur annuler, la fenêtre disparaît puis quelques secondes plus tard, elle réapparaît, je rappuie sur annuler, elle disparaît définitivement.
J't'avoue que je n'ai pas cherché sur le forum une solution à ce problème vu qu'il n'en ai pas vraiment un mais si t'as une idée je suis preneur.
Merci
Description technique
ASUSTeK COMPUTER INC. UX310UA
Ubuntu 22.04.3 LTS, 64 bits, Gnome 42.9, Sys fenêtrage Xorg
Hors ligne
#9 Le 22/01/2017, à 06:42
- moko138
Re : [résolu] Problème boot : acpi et busybox
Mais le grub continue de s'afficher au démarrage alors que d'après ce que je comprends de ce que tu dis ça ne devrait plus être le cas, non ?
Peux-tu refaire un rapport boot-info, mais cette fois à partir de ta session installée ?
- -
Sais-tu pourquoi la température a tellement monté ?
Non, à part un pc enfoui dans la couette, peut-être. Classiquement :
Veiller à poser le portable sur une surface rigide ;
Vérifier que les ouïes soient bien dégagées, et que l'espace sous le portable permette bien à l'air de circuler et de se renouveler ; si nécessaire, augmenter cet espace.
- -
Veux-tu dire qu'il faut allumer/éteindre l'ordi le moins possible?
Oui.
- -
une fenêtre s'affiche avec écrit : problème logiciel détecté
Classique, crispant et inutile. Cherche "apport" dans la Doc, tu trouveras comment désactiver cet affichage.
Mais il sera intéressant, juste après un prochain démarrage (en session installée), de lire le fichier dmesg-a.txt produit par
dmesg > dmesg-a.txtet d'appliquer les 2 premières suggestions de grandtoubab en ./viewtopic.php?pid=21546046#p21546046.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#10 Le 22/01/2017, à 15:12
- hazardomadaire
Re : [résolu] Problème boot : acpi et busybox
Bon encore merci pour toutes ces réponses et tu verras à la fin j'ai encore une nouvelle question pour toi puisque visiblement tu as réponses à tout !
Et le coup de la couette oui, je fais exactement ce qu'il ne faut pas faire. Promis j'arrête !
Au sujet de éteindre/allumer : faut-il carrément laisser toujours l'ordi en veille ou allumer si on ne le transporte pas (car je crois savoir qu'il ne faut jamais transporter un ordi en veille et à fortiori allumer) ?
hazardomadaire a écrit :
Mais le grub continue de s'afficher au démarrage alors que d'après ce que je comprends de ce que tu dis ça ne devrait plus être le cas, non ?
moko138 a écrit :
Peux-tu refaire un rapport boot-info, mais cette fois à partir de ta session installée ?
voilà
Boot Info Script cfd9efe + Boot-Repair extra info [Boot-Info 26Apr2016]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v1.99-2.00) is installed in the boot sector of
sda1 and looks at sector 54962520 of the same hard
drive for core.img, but core.img can not be found at
this location.
Operating System: Ubuntu 16.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 246,163,455 246,161,408 83 Linux
/dev/sda2 246,163,456 250,068,991 3,905,536 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc ext4
/dev/sda2
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jan 22 13:08 ata-ADATA_SP900NS38_2E3720030777 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 22 13:08 ata-ADATA_SP900NS38_2E3720030777-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 22 13:08 ata-ADATA_SP900NS38_2E3720030777-part2 -> ../../sda2
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc
else
search --no-floppy --fs-uuid --set=root b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc
else
search --no-floppy --fs-uuid --set=root b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc
fi
linux /boot/vmlinuz-4.4.0-59-generic root=UUID=b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-59-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc' {
menuentry 'Ubuntu, avec Linux 4.4.0-59-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-59-generic-advanced-b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc
else
search --no-floppy --fs-uuid --set=root b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc
fi
echo 'Chargement de Linux 4.4.0-59-generic…'
linux /boot/vmlinuz-4.4.0-59-generic root=UUID=b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-59-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-59-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-59-generic-init-upstart-b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc
else
search --no-floppy --fs-uuid --set=root b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc
fi
echo 'Chargement de Linux 4.4.0-59-generic…'
linux /boot/vmlinuz-4.4.0-59-generic root=UUID=b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-59-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-59-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-59-generic-recovery-b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc
else
search --no-floppy --fs-uuid --set=root b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc
fi
echo 'Chargement de Linux 4.4.0-59-generic…'
linux /boot/vmlinuz-4.4.0-59-generic root=UUID=b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-59-generic
}
menuentry 'Ubuntu, avec Linux 4.4.0-57-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-57-generic-advanced-b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc
else
search --no-floppy --fs-uuid --set=root b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc
fi
echo 'Chargement de Linux 4.4.0-57-generic…'
linux /boot/vmlinuz-4.4.0-57-generic root=UUID=b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-57-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-57-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-57-generic-init-upstart-b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc
else
search --no-floppy --fs-uuid --set=root b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc
fi
echo 'Chargement de Linux 4.4.0-57-generic…'
linux /boot/vmlinuz-4.4.0-57-generic root=UUID=b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-57-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-57-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-57-generic-recovery-b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc
else
search --no-floppy --fs-uuid --set=root b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc
fi
echo 'Chargement de Linux 4.4.0-57-generic…'
linux /boot/vmlinuz-4.4.0-57-generic root=UUID=b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-57-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc / ext4 errors=remount-ro 0 1
# swap was on /dev/sda2 during installation
#UUID=b04367fd-a1b5-4de0-8bd5-08ca3e8ae182 none swap sw 0 0
#/dev/mapper/cryptswap1 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
0.686645508 = 0.737280000 boot/grub/grub.cfg 1
26.155181885 = 28.083912704 boot/grub/i386-pc/core.img 1
78.639228821 = 84.438228992 boot/vmlinuz-4.4.0-57-generic 1
70.866931915 = 76.092788736 boot/vmlinuz-4.4.0-59-generic 1
70.866931915 = 76.092788736 vmlinuz 1
78.639228821 = 84.438228992 vmlinuz.old 1
78.958724976 = 84.781285376 boot/initrd.img-4.4.0-57-generic 1
52.902538300 = 56.803667968 boot/initrd.img-4.4.0-59-generic 4
52.902538300 = 56.803667968 initrd.img 4
78.958724976 = 84.781285376 initrd.img.old 1
ADDITIONAL INFORMATION :
=================== log of boot-info 2017-01-22__13h08 ===================
boot-info version : 4ppa40
boot-sav version : 4ppa40
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa40
boot-info is executed in installed-session (Ubuntu 16.04.1 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.4.0-59-generic root=UUID=b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc ro quiet splash vt.handoff=7
NTFS signature is missing.
Failed to mount '/dev/sda2': Argument invalide
The device '/dev/sda2' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount /dev/sda2 : Error code 12
mount -r /dev/sda2 /mnt/boot-sav/sda2
NTFS signature is missing.
Failed to mount '/dev/sda2': Argument invalide
The device '/dev/sda2' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount -r /dev/sda2 : Error code 12
=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 16.04.1 LTS CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc" TYPE="ext4" PTTYPE="dos" PARTUUID="00036312-01"
/dev/sda2: PARTUUID="00036312-02"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
NTFS signature is missing.
Failed to mount '/dev/sda2': Argument invalide
The device '/dev/sda2' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount /dev/sda2 : Error code 12
mount -r /dev/sda2 /mnt/boot-sav/sda2
NTFS signature is missing.
Failed to mount '/dev/sda2': Argument invalide
The device '/dev/sda2' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount -r /dev/sda2 : Error code 12
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 janv. 14 01:30 grub.d
drwxr-xr-x 2 root root 4096 janv. 14 01:29 grub.d.bak
total 72
-rwxr-xr-x 1 root root 9791 déc. 20 22:03 00_header
-rwxr-xr-x 1 root root 6258 mars 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12261 déc. 20 22:03 10_linux
-rwxr-xr-x 1 root root 11082 déc. 20 22:03 20_linux_xen
-rwxr-xr-x 1 root root 11692 déc. 20 22:03 30_os-prober
-rwxr-xr-x 1 root root 1418 déc. 20 22:03 30_uefi-firmware
-rwxr-xr-x 1 root root 214 déc. 20 22:03 40_custom
-rwxr-xr-x 1 root root 216 déc. 20 22:03 41_custom
-rw-r--r-- 1 root root 483 déc. 20 22:03 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
EFI in dmesg.
[ 0.000000] ACPI: UEFI 0x00000000DC72E0F8 000042 (v01 00000000 00000000)
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, signed grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, .
sda2 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA ADATA SP900NS38 (scsi)
Disk /dev/sda: 128GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 126GB 126GB primary ext4 boot
2 126GB 128GB 2000MB primary
=================== parted -lm:
BYT;
/dev/sda:128GB:scsi:512:512:msdos:ATA ADATA SP900NS38:;
1:1049kB:126GB:126GB:ext4::boot;
2:126GB:128GB:2000MB:::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 119,2G
sda1 part ext4 117,4G
sda2 part 1,9G
KNAME ROTA RO RM STATE MOUNTPOINT
sda 0 0 0 running
sda1 0 0 0 /
sda2 0 0 0
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=4024336k,nr_inodes=1006084,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=808972k,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset,clone_children)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event,release_agent=/run/cgmanager/agents/cgm-release-agent.perf_event)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids,release_agent=/run/cgmanager/agents/cgm-release-agent.pids)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb,release_agent=/run/cgmanager/agents/cgm-release-agent.hugetlb)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=27,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
cgmfs on /run/cgmanager/fs type tmpfs (rw,relatime,size=100k,mode=755)
tmpfs on /run/user/1001 type tmpfs (rw,nosuid,nodev,relatime,size=808972k,mode=700,uid=1001,gid=1001)
/home/.ecryptfs/hazardomadaire/.Private on /home/hazardomadaire type ecryptfs (rw,nosuid,nodev,relatime,ecryptfs_fnek_sig=ae993a3fbd61f987,ecryptfs_sig=d91af4c1c8d56b4e,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs)
gvfsd-fuse on /run/user/1001/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1001,group_id=1001)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 ecryptfs fb0 fd full fuse hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sg0 shm snapshot snd stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
ls: impossible d'accéder à '': Aucun fichier ou dossier de ce type
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs tmpfs 791M 9.4M 781M 2% /run
/dev/sda1 ext4 116G 57G 53G 52% /
tmpfs tmpfs 3.9G 408K 3.9G 1% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
cgmfs tmpfs 100K 0 100K 0% /run/cgmanager/fs
tmpfs tmpfs 791M 68K 790M 1% /run/user/1001
/home/hazardomadaire/.Private ecryptfs 116G 57G 53G 52% /home/hazardomadaire
=================== fdisk -l:
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/sda: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00036312
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 246163455 246161408 117.4G 83 Linux
/dev/sda2 246163456 250068991 3905536 1.9G 82 Linux swap / Solaris
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to) and reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 16.04.1 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== User settings
The settings chosen by the user will not act on the boot.hazardomadaire a écrit :
une fenêtre s'affiche avec écrit : problème logiciel détecté
moko138 a écrit :
Cherche "apport" dans la Doc, tu trouveras comment désactiver cet affichage.
C'est ce que j'ai fait et la première solution proposée (supprimer les rapports de crash) a fonctionné. L'affichage de la fenêtre a disparu au démarrage.
moko138 a écrit :
juste après un prochain démarrage (en session installée), de lire le fichier dmesg-a.txt
c'est ce que j'ai fait et voilà ce que ça donne:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-59-generic (buildd@lgw01-11) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #80-Ubuntu SMP Fri Jan 6 17:47:47 UTC 2017 (Ubuntu 4.4.0-59.80-generic 4.4.35)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-59-generic root=UUID=b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d73d5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d73d6000-0x00000000d76b7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d76b8000-0x00000000dbc0afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dbc0b000-0x00000000dbc69fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dbc6a000-0x00000000dbfd6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dbfd7000-0x00000000dcd51fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dcd52000-0x00000000dcffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dcfff000-0x00000000dcffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd800000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Intel Corporation SharkBay Platform/WhiteTip Mountain1 Fab2, BIOS 5.6.5 01/09/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 0080000000 mask 7FC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 00D0000000 mask 7FF8000000 write-back
[ 0.000000] 4 base 00D8000000 mask 7FFC000000 write-back
[ 0.000000] 5 base 00DC000000 mask 7FFF000000 write-back
[ 0.000000] 6 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 7 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 8 base 021F000000 mask 7FFF000000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3328MB, range: 128MB, type WB
[ 0.000000] reg 4, base: 3456MB, range: 64MB, type WB
[ 0.000000] reg 5, base: 3520MB, range: 16MB, type WB
[ 0.000000] reg 6, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 7, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 8, base: 8688MB, range: 16MB, type UC
[ 0.000000] total RAM covered: 8128M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 8 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 512MB, type WB
[ 0.000000] reg 3, base: 3536MB, range: 16MB, type UC
[ 0.000000] reg 4, base: 3552MB, range: 32MB, type UC
[ 0.000000] reg 5, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 6, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 7, base: 8688MB, range: 16MB, type UC
[ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdd000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd840-0x000fd84f] mapped at [ffff8800000fd840]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x0220b000, 0x0220bfff] PGTABLE
[ 0.000000] BRK [0x0220c000, 0x0220cfff] PGTABLE
[ 0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
[ 0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[ 0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
[ 0.000000] BRK [0x02210000, 0x02210fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33674000-0x35b31fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0580 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DC71D090 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DC72DAE8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DC71D1C0 010925 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000DCD50F80 000040
[ 0.000000] ACPI: APIC 0x00000000DC72DBF8 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DC72DC80 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000DC72DCC8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000DC72DD68 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DC72DDA8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DC72DDE0 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000DC72E0F8 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x00000000DC72E140 000584 (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
[ 0.000000] ACPI: ASF! 0x00000000DC72E6C8 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000DC72E768 000539 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DC72ECA8 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DC72F820 005CF6 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: DMAR 0x00000000DC735518 0000F8 (v01 INTEL BDW 00000001 INTL 00000001)
[ 0.000000] ACPI: CSRT 0x00000000DC735610 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21eff7000-0x21effbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000d73d5fff]
[ 0.000000] node 0: [mem 0x00000000d76b8000-0x00000000dbc0afff]
[ 0.000000] node 0: [mem 0x00000000dbc6a000-0x00000000dbfd6fff]
[ 0.000000] node 0: [mem 0x00000000dcfff000-0x00000000dcffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[ 0.000000] On node 0 totalpages: 2075699
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14003 pages used for memmap
[ 0.000000] DMA32 zone: 896151 pages, LIFO batch:31
[ 0.000000] Normal zone: 18368 pages used for memmap
[ 0.000000] Normal zone: 1175552 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xde000000-0xdfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high res lint[0x24])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] low dfl lint[0x48])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] low res lint[0x49])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] low dfl lint[0x4c])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd73d6000-0xd76b7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdbc0b000-0xdbc69fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdbfd7000-0xdcd51fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdcd52000-0xdcffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdd7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd800000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88021ec00000 s98264 r8192 d28712 u524288
[ 0.000000] pcpu-alloc: s98264 r8192 d28712 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2043243
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-59-generic root=UUID=b47c3f77-9c9a-4080-8c88-e0ccd1d05ccc ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8048648K/8302796K available (8436K kernel code, 1291K rwdata, 3960K rodata, 1488K init, 1316K bss, 254148K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:728 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2194.785 MHz processor
[ 0.000026] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.57 BogoMIPS (lpj=8779140)
[ 0.000029] pid_max: default: 32768 minimum: 301
[ 0.000035] ACPI: Core revision 20150930
[ 0.014232] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.014253] Security Framework initialized
[ 0.014254] Yama: becoming mindful.
[ 0.014268] AppArmor: AppArmor initialized
[ 0.014725] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.016389] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.017167] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.017176] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.017393] Initializing cgroup subsys io
[ 0.017396] Initializing cgroup subsys memory
[ 0.017401] Initializing cgroup subsys devices
[ 0.017403] Initializing cgroup subsys freezer
[ 0.017405] Initializing cgroup subsys net_cls
[ 0.017407] Initializing cgroup subsys perf_event
[ 0.017409] Initializing cgroup subsys net_prio
[ 0.017412] Initializing cgroup subsys hugetlb
[ 0.017413] Initializing cgroup subsys pids
[ 0.017434] CPU: Physical Processor ID: 0
[ 0.017435] CPU: Processor Core ID: 0
[ 0.017440] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.017441] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.018413] mce: CPU supports 7 MCE banks
[ 0.018425] CPU0: Thermal monitoring enabled (TM1)
[ 0.018432] process: using mwait in idle threads
[ 0.018435] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.018436] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.018792] Freeing SMP alternatives memory: 32K (ffffffff820b8000 - ffffffff820c0000)
[ 0.020345] ftrace: allocating 32064 entries in 126 pages
[ 0.033197] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.033199] smpboot: Max logical packages: 2
[ 0.033204] DMAR: Host address width 39
[ 0.033205] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.033216] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[ 0.033217] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.033220] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.033221] DMAR: RMRR base: 0x000000dcf05000 end: 0x000000dcf13fff
[ 0.033223] DMAR: RMRR base: 0x000000dd800000 end: 0x000000dfffffff
[ 0.033224] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA
[ 0.033225] DMAR: ANDD device: 2 name: \_SB.PCI0.SDHC
[ 0.033226] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.033227] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.033228] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.033229] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.033655] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.033657] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.034263] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073951] TSC deadline timer enabled
[ 0.073954] smpboot: CPU0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[ 0.073971] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
[ 0.073989] ... version: 3
[ 0.073990] ... bit width: 48
[ 0.073991] ... generic registers: 4
[ 0.073991] ... value mask: 0000ffffffffffff
[ 0.073992] ... max period: 0000ffffffffffff
[ 0.073993] ... fixed-purpose events: 3
[ 0.073994] ... event mask: 000000070000000f
[ 0.074741] x86: Booting SMP configuration:
[ 0.074743] .... node #0, CPUs: #1
[ 0.078226] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.078286] #2 #3
[ 0.085212] x86: Booted up 1 node, 4 CPUs
[ 0.085217] smpboot: Total of 4 processors activated (17558.28 BogoMIPS)
[ 0.088887] devtmpfs: initialized
[ 0.090921] evm: security.selinux
[ 0.090923] evm: security.SMACK64
[ 0.090923] evm: security.SMACK64EXEC
[ 0.090924] evm: security.SMACK64TRANSMUTE
[ 0.090925] evm: security.SMACK64MMAP
[ 0.090925] evm: security.ima
[ 0.090926] evm: security.capability
[ 0.090977] PM: Registering ACPI NVS region [mem 0xdbfd7000-0xdcd51fff] (14135296 bytes)
[ 0.091192] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.091269] pinctrl core: initialized pinctrl subsystem
[ 0.091368] RTC time: 12:26:36, date: 01/22/17
[ 0.091476] NET: Registered protocol family 16
[ 0.100742] cpuidle: using governor ladder
[ 0.112732] cpuidle: using governor menu
[ 0.112736] PCCT header not found.
[ 0.112822] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.112824] ACPI: bus type PCI registered
[ 0.112825] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.112901] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.112903] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.112912] PCI: Using configuration type 1 for base access
[ 0.121076] ACPI: Added _OSI(Module Device)
[ 0.121078] ACPI: Added _OSI(Processor Device)
[ 0.121079] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.121080] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.124847] ACPI: Executed 7 blocks of module-level executable AML code
[ 0.128452] ACPI: Dynamic OEM Table Load:
[ 0.128457] ACPI: SSDT 0xFFFF8802148D0800 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.129105] ACPI: Dynamic OEM Table Load:
[ 0.129109] ACPI: SSDT 0xFFFF880214812800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.129786] ACPI: Dynamic OEM Table Load:
[ 0.129790] ACPI: SSDT 0xFFFF880214857400 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.130771] ACPI : EC: EC started
[ 0.937502] ACPI: Interpreter enabled
[ 0.937529] ACPI: (supports S0 S3 S4 S5)
[ 0.937530] ACPI: Using IOAPIC for interrupt routing
[ 0.937560] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.939610] ACPI: Power Resource [PG00] (on)
[ 0.939935] ACPI: Power Resource [PG01] (on)
[ 0.940251] ACPI: Power Resource [PG02] (on)
[ 0.955192] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.955197] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.955673] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.955675] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.956056] PCI host bridge to bus 0000:00
[ 0.956058] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.956060] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.956061] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.956062] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.956064] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.956071] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 0.956150] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[ 0.956162] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
[ 0.956168] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.956172] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.956240] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 0.956251] pci 0000:00:03.0: reg 0x10: [mem 0xf7214000-0xf7217fff 64bit]
[ 0.956339] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 0.956361] pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit]
[ 0.956405] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.956447] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.956479] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 0.956504] pci 0000:00:16.0: reg 0x10: [mem 0xf721c000-0xf721c01f 64bit]
[ 0.956558] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.956638] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[ 0.956659] pci 0000:00:1b.0: reg 0x10: [mem 0xf7210000-0xf7213fff 64bit]
[ 0.956703] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.956750] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.956780] pci 0000:00:1c.0: [8086:9c94] type 01 class 0x060400
[ 0.956836] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.956899] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.956930] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[ 0.956986] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.957046] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.957082] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[ 0.957107] pci 0000:00:1d.0: reg 0x10: [mem 0xf721a000-0xf721a3ff]
[ 0.957175] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.957217] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.957249] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[ 0.957406] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[ 0.957423] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.957429] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.957435] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.957441] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.957447] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.957454] pci 0000:00:1f.2: reg 0x24: [mem 0xf7219000-0xf72197ff]
[ 0.957477] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.957539] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 0.957553] pci 0000:00:1f.3: reg 0x10: [mem 0xf7218000-0xf72180ff 64bit]
[ 0.957570] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.957697] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.957733] pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.957759] pci 0000:01:00.0: reg 0x18: [mem 0xf7100000-0xf7100fff 64bit]
[ 0.957776] pci 0000:01:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.957841] pci 0000:01:00.0: supports D1 D2
[ 0.957842] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.957889] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.965504] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.965508] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.965511] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.965515] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.965599] pci 0000:02:00.0: [8086:08b3] type 00 class 0x028000
[ 0.965661] pci 0000:02:00.0: reg 0x10: [mem 0xf7000000-0xf7001fff 64bit]
[ 0.965827] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.965900] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.973522] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.973527] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.978018] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.978064] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.978108] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.978151] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.978193] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.978236] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.978278] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.978320] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.978544] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.978599] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.978703] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.978705] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.978707] vgaarb: loaded
[ 0.978708] vgaarb: bridge control possible 0000:00:02.0
[ 0.978923] SCSI subsystem initialized
[ 0.978960] libata version 3.00 loaded.
[ 0.978979] ACPI: bus type USB registered
[ 0.978993] usbcore: registered new interface driver usbfs
[ 0.979001] usbcore: registered new interface driver hub
[ 0.979015] usbcore: registered new device driver usb
[ 0.979135] PCI: Using ACPI for IRQ routing
[ 0.980402] PCI: pci_cache_line_size set to 64 bytes
[ 0.980455] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.980457] e820: reserve RAM buffer [mem 0xd73d6000-0xd7ffffff]
[ 0.980458] e820: reserve RAM buffer [mem 0xdbc0b000-0xdbffffff]
[ 0.980459] e820: reserve RAM buffer [mem 0xdbfd7000-0xdbffffff]
[ 0.980460] e820: reserve RAM buffer [mem 0xdd000000-0xdfffffff]
[ 0.980461] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.980581] NetLabel: Initializing
[ 0.980582] NetLabel: domain hash size = 128
[ 0.980583] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.980593] NetLabel: unlabeled traffic allowed by default
[ 0.980661] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.980666] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.982679] amd_nb: Cannot enumerate AMD northbridges
[ 0.982690] clocksource: Switched to clocksource hpet
[ 0.988021] AppArmor: AppArmor Filesystem Enabled
[ 0.988084] pnp: PnP ACPI init
[ 0.990790] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.990835] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.990924] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.990926] system 00:02: [io 0xffff] has been reserved
[ 0.990928] system 00:02: [io 0xffff] has been reserved
[ 0.990930] system 00:02: [io 0xffff] has been reserved
[ 0.990931] system 00:02: [io 0x1800-0x18fe] could not be reserved
[ 0.990933] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.990936] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.990976] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.991014] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.991016] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.991180] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.991183] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.991185] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.991186] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.991188] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.991190] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.991191] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.991193] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.991195] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.991196] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.991198] system 00:05: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.991200] system 00:05: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 0.991202] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.991522] pnp: PnP ACPI: found 6 devices
[ 0.997479] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.997499] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.997502] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.997506] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.997509] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.997513] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.997517] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.997524] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.997526] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.997527] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.997528] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff window]
[ 0.997530] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.997531] pci_bus 0000:01: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.997532] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.997534] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff]
[ 0.997561] NET: Registered protocol family 2
[ 0.997699] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.997820] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.997994] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.998022] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.998047] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.998100] NET: Registered protocol family 1
[ 0.998112] pci 0000:00:02.0: Video device with shadowed ROM
[ 1.014818] PCI: CLS 64 bytes, default 64
[ 1.014863] Trying to unpack rootfs image as initramfs...
[ 1.538757] Freeing initrd memory: 37624K (ffff880033674000 - ffff880035b32000)
[ 1.538794] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDMA
[ 1.538797] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDHC
[ 1.538807] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.538809] software IO TLB [mem 0xd7c0b000-0xdbc0b000] (64MB) mapped at [ffff8800d7c0b000-ffff8800dbc0afff]
[ 1.538860] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 1.538861] hw unit of domain pp0-core 2^-14 Joules
[ 1.538862] hw unit of domain package 2^-14 Joules
[ 1.538863] hw unit of domain dram 2^-14 Joules
[ 1.538864] hw unit of domain pp1-gpu 2^-14 Joules
[ 1.538985] Scanning for low memory corruption every 60 seconds
[ 1.539268] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.539297] audit: initializing netlink subsys (disabled)
[ 1.539309] audit: type=2000 audit(1485087997.532:1): initialized
[ 1.539707] Initialise system trusted keyring
[ 1.539818] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 1.539819] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.541063] zbud: loaded
[ 1.541234] VFS: Disk quotas dquot_6.6.0
[ 1.541261] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.541478] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.541674] fuse init (API version 7.23)
[ 1.541780] Key type big_key registered
[ 1.541802] Allocating IMA MOK and blacklist keyrings.
[ 1.542103] Key type asymmetric registered
[ 1.542106] Asymmetric key parser 'x509' registered
[ 1.542140] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.542166] io scheduler noop registered
[ 1.542169] io scheduler deadline registered (default)
[ 1.542194] io scheduler cfq registered
[ 1.542559] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.542561] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.542563] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.542577] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 1.542579] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.542581] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 1.542586] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.542591] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.542612] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 1.542613] vesafb: scrolling: redraw
[ 1.542614] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.542623] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001000000, using 8128k, total 8128k
[ 1.542704] Console: switching to colour frame buffer device 240x67
[ 1.542736] fb0: VESA VGA frame buffer device
[ 1.542750] intel_idle: MWAIT substates: 0x11142120
[ 1.542751] intel_idle: v0.4.1 model 0x3D
[ 1.542752] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.546797] ACPI: AC Adapter [ADP1] (off-line)
[ 1.546858] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.550759] ACPI: Lid Switch [LID0]
[ 1.550795] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.550798] ACPI: Power Button [PWRB]
[ 1.550827] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.550829] ACPI: Sleep Button [SLPB]
[ 1.550859] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.550861] ACPI: Power Button [PWRF]
[ 1.551960] ACPI: Invalid active0 threshold
[ 1.562800] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.562802] ACPI: Thermal Zone [TZ00] (62 C)
[ 1.582781] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.582783] ACPI: Thermal Zone [TZ01] (62 C)
[ 1.582830] GHES: HEST is not enabled!
[ 1.582968] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.586876] Linux agpgart interface v0.103
[ 1.589166] brd: module loaded
[ 1.590150] loop: module loaded
[ 1.590335] libphy: Fixed MDIO Bus: probed
[ 1.590339] tun: Universal TUN/TAP device driver, 1.6
[ 1.590340] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.590374] PPP generic driver version 2.4.2
[ 1.590425] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.590433] ehci-pci: EHCI PCI platform driver
[ 1.590549] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.590554] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.590565] ehci-pci 0000:00:1d.0: debug port 2
[ 1.594468] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.594479] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf721a000
[ 1.602757] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.602800] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.602802] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.602804] usb usb1: Product: EHCI Host Controller
[ 1.602805] usb usb1: Manufacturer: Linux 4.4.0-59-generic ehci_hcd
[ 1.602806] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.602941] hub 1-0:1.0: USB hub found
[ 1.602946] hub 1-0:1.0: 2 ports detected
[ 1.603067] ehci-platform: EHCI generic platform driver
[ 1.603080] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.603086] ohci-pci: OHCI PCI platform driver
[ 1.603096] ohci-platform: OHCI generic platform driver
[ 1.603104] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.603228] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.603232] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.604297] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[ 1.604301] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.604369] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.604370] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.604372] usb usb2: Product: xHCI Host Controller
[ 1.604373] usb usb2: Manufacturer: Linux 4.4.0-59-generic xhci-hcd
[ 1.604374] usb usb2: SerialNumber: 0000:00:14.0
[ 1.604460] hub 2-0:1.0: USB hub found
[ 1.604471] hub 2-0:1.0: 11 ports detected
[ 1.669990] ACPI: Battery Slot [BAT0] (battery present)
[ 1.673168] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.673172] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.673197] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.673199] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.673200] usb usb3: Product: xHCI Host Controller
[ 1.673201] usb usb3: Manufacturer: Linux 4.4.0-59-generic xhci-hcd
[ 1.673202] usb usb3: SerialNumber: 0000:00:14.0
[ 1.673343] hub 3-0:1.0: USB hub found
[ 1.673350] hub 3-0:1.0: 4 ports detected
[ 1.674717] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.691358] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.691365] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.691656] mousedev: PS/2 mouse device common for all mice
[ 1.692102] rtc_cmos 00:03: RTC can wake from S4
[ 1.692317] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.692344] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.692351] i2c /dev entries driver
[ 1.692400] device-mapper: uevent: version 1.0.3
[ 1.692547] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.692571] Intel P-state driver initializing.
[ 1.692750] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.693623] NET: Registered protocol family 10
[ 1.694123] NET: Registered protocol family 17
[ 1.694152] Key type dns_resolver registered
[ 1.694598] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x11
[ 1.694612] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x11
[ 1.694627] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x11
[ 1.694645] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x11
[ 1.694715] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.695111] registered taskstats version 1
[ 1.695164] Loading compiled-in X.509 certificates
[ 1.697352] Loaded X.509 cert 'Build time autogenerated kernel key: 6ffa6bfaa152a74cd2b6aa1e188cb999d8f5632b'
[ 1.697408] zswap: loaded using pool lzo/zbud
[ 1.700076] Key type trusted registered
[ 1.702945] Key type encrypted registered
[ 1.702952] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.702956] ima: No TPM chip found, activating TPM-bypass!
[ 1.702977] evm: HMAC attrs: 0x1
[ 1.703322] Magic number: 1:269:431
[ 1.703418] rtc_cmos 00:03: setting system clock to 2017-01-22 12:26:37 UTC (1485087997)
[ 1.703473] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.703475] EDD information not available.
[ 1.703540] PM: Hibernation image not present or could not be loaded.
[ 1.704646] Freeing unused kernel memory: 1488K (ffffffff81f44000 - ffffffff820b8000)
[ 1.704648] Write protecting the kernel read-only data: 14336k
[ 1.705103] Freeing unused kernel memory: 1792K (ffff880001840000 - ffff880001a00000)
[ 1.705400] Freeing unused kernel memory: 136K (ffff880001dde000 - ffff880001e00000)
[ 1.708965] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.716578] random: systemd-udevd: uninitialized urandom read (16 bytes read, 23 bits of entropy available)
[ 1.716658] random: systemd-udevd: uninitialized urandom read (16 bytes read, 23 bits of entropy available)
[ 1.716673] random: systemd-udevd: uninitialized urandom read (16 bytes read, 23 bits of entropy available)
[ 1.716691] random: systemd-udevd: uninitialized urandom read (16 bytes read, 23 bits of entropy available)
[ 1.716947] random: udevadm: uninitialized urandom read (16 bytes read, 23 bits of entropy available)
[ 1.716988] random: udevadm: uninitialized urandom read (16 bytes read, 23 bits of entropy available)
[ 1.717195] random: udevadm: uninitialized urandom read (16 bytes read, 23 bits of entropy available)
[ 1.717239] random: udevadm: uninitialized urandom read (16 bytes read, 23 bits of entropy available)
[ 1.717278] random: udevadm: uninitialized urandom read (16 bytes read, 23 bits of entropy available)
[ 1.717316] random: udevadm: uninitialized urandom read (16 bytes read, 23 bits of entropy available)
[ 1.742086] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.755389] ahci 0000:00:1f.2: version 3.0
[ 1.755697] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.755705] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.756280] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c86000, 00:e0:4c:b5:00:08, XID 0c900800 IRQ 46
[ 1.756283] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.758573] [drm] Initialized drm 1.1.0 20060810
[ 1.770806] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x8 impl SATA mode
[ 1.770812] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 1.771689] scsi host0: ahci
[ 1.771799] scsi host1: ahci
[ 1.771898] scsi host2: ahci
[ 1.771995] scsi host3: ahci
[ 1.772057] ata1: DUMMY
[ 1.772059] ata2: DUMMY
[ 1.772060] ata3: DUMMY
[ 1.772063] ata4: SATA max UDMA/133 abar m2048@0xf7219000 port 0xf7219280 irq 45
[ 1.784033] [drm] Memory usable by graphics device = 4096M
[ 1.784037] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[ 1.784038] fb: switching to inteldrmfb from VESA VGA
[ 1.784060] Console: switching to colour dummy device 80x25
[ 1.784134] [drm] Replacing VGA console driver
[ 1.790392] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.790394] [drm] Driver supports precise vblank timestamp query.
[ 1.790826] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.805251] fbcon: inteldrmfb (fb0) is primary device
[ 1.805315] Console: switching to colour frame buffer device 240x67
[ 1.805339] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.807426] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.807644] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 1.807766] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 1.914806] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.982817] usb 2-5: new high-speed USB device number 2 using xhci_hcd
[ 2.047231] usb 1-1: New USB device found, idVendor=8087, idProduct=8001
[ 2.047234] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.047482] hub 1-1:1.0: USB hub found
[ 2.047554] hub 1-1:1.0: 8 ports detected
[ 2.090827] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.218910] usb 2-5: New USB device found, idVendor=058f, idProduct=3821
[ 2.218914] usb 2-5: New USB device strings: Mfr=6, Product=2, SerialNumber=0
[ 2.218915] usb 2-5: Product: USB 2.0 Camera
[ 2.218917] usb 2-5: Manufacturer: 0x0001
[ 2.282438] ata4.00: ATA-9: ADATA SP900NS38, 5.6.0, max UDMA/133
[ 2.282442] ata4.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.538837] tsc: Refined TSC clocksource calibration: 2194.918 MHz
[ 2.538841] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa37202099, max_idle_ns: 440795206796 ns
[ 2.543396] ata4.00: configured for UDMA/133
[ 2.543623] scsi 3:0:0:0: Direct-Access ATA ADATA SP900NS38 0 PQ: 0 ANSI: 5
[ 2.543989] sd 3:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.544002] sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 2.544068] sd 3:0:0:0: [sda] Write Protect is off
[ 2.544072] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.544096] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.545371] sda: sda1 sda2
[ 2.545634] sd 3:0:0:0: [sda] Attached SCSI disk
[ 2.730817] raid6: sse2x1 gen() 8662 MB/s
[ 2.798823] raid6: sse2x1 xor() 6474 MB/s
[ 2.866827] raid6: sse2x2 gen() 10719 MB/s
[ 2.934834] raid6: sse2x2 xor() 7010 MB/s
[ 3.002837] raid6: sse2x4 gen() 12316 MB/s
[ 3.070839] raid6: sse2x4 xor() 8726 MB/s
[ 3.138843] raid6: avx2x1 gen() 16880 MB/s
[ 3.206847] raid6: avx2x2 gen() 20006 MB/s
[ 3.274850] raid6: avx2x4 gen() 22373 MB/s
[ 3.274851] raid6: using algorithm avx2x4 gen() 22373 MB/s
[ 3.274852] raid6: using avx2x2 recovery algorithm
[ 3.275817] xor: automatically using best checksumming function:
[ 3.314852] avx : 26750.000 MB/sec
[ 3.326820] Btrfs loaded
[ 3.460227] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 3.539086] clocksource: Switched to clocksource tsc
[ 8.553784] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.647544] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 8.647654] systemd[1]: Detected architecture x86-64.
[ 8.647873] systemd[1]: Set hostname to <hazardomadaire-SharkBay-Platform>.
[ 8.724936] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.725015] systemd[1]: Listening on udev Kernel Socket.
[ 8.725045] systemd[1]: Listening on Journal Socket.
[ 8.725060] systemd[1]: Reached target Swap.
[ 8.725067] systemd[1]: Reached target Encrypted Volumes.
[ 8.725074] systemd[1]: Reached target Remote File Systems (Pre).
[ 8.725089] systemd[1]: Listening on Syslog Socket.
[ 8.725097] systemd[1]: Reached target User and Group Name Lookups.
[ 8.725104] systemd[1]: Reached target Remote File Systems.
[ 8.725127] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 8.725156] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.725235] systemd[1]: Created slice User and Session Slice.
[ 8.725289] systemd[1]: Created slice System Slice.
[ 8.739421] systemd[1]: Started Braille Device Support.
[ 8.744290] systemd[1]: Starting Load Kernel Modules...
[ 8.744866] systemd[1]: Starting Uncomplicated firewall...
[ 8.746590] systemd[1]: Mounting Debug File System...
[ 8.746629] systemd[1]: Reached target Slices.
[ 8.747029] systemd[1]: Starting Set console keymap...
[ 8.747723] systemd[1]: Mounting Huge Pages File System...
[ 8.750028] systemd[1]: Listening on Journal Audit Socket.
[ 8.750461] systemd[1]: Started Read required files in advance.
[ 8.750938] systemd[1]: Starting Journal Service...
[ 8.751016] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.751639] systemd[1]: Mounting POSIX Message Queue File System...
[ 8.752113] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 8.752187] systemd[1]: Listening on udev Control Socket.
[ 8.752380] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.759935] systemd[1]: Started Uncomplicated firewall.
[ 8.762708] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 8.765085] lp: driver loaded but no devices found
[ 8.765671] systemd[1]: Mounted Debug File System.
[ 8.765753] systemd[1]: Mounted Huge Pages File System.
[ 8.765817] systemd[1]: Mounted POSIX Message Queue File System.
[ 8.767819] ppdev: user-space parallel port driver
[ 8.774567] systemd[1]: Started Load Kernel Modules.
[ 8.790102] systemd[1]: Started Journal Service.
[ 8.898148] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.942010] systemd-journald[300]: Received request to flush runtime journal from PID 1
[ 9.059398] audit: type=1400 audit(1485088004.851:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=529 comm="apparmor_parser"
[ 9.059409] audit: type=1400 audit(1485088004.851:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=529 comm="apparmor_parser"
[ 9.059417] audit: type=1400 audit(1485088004.851:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=529 comm="apparmor_parser"
[ 9.059424] audit: type=1400 audit(1485088004.851:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=529 comm="apparmor_parser"
[ 9.062727] audit: type=1400 audit(1485088004.851:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=548 comm="apparmor_parser"
[ 9.062739] audit: type=1400 audit(1485088004.851:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=548 comm="apparmor_parser"
[ 9.066105] audit: type=1400 audit(1485088004.855:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=528 comm="apparmor_parser"
[ 9.066117] audit: type=1400 audit(1485088004.855:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=528 comm="apparmor_parser"
[ 9.068641] audit: type=1400 audit(1485088004.859:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=532 comm="apparmor_parser"
[ 9.068652] audit: type=1400 audit(1485088004.859:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=532 comm="apparmor_parser"
[ 9.112649] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.170652] Intel(R) Wireless WiFi driver for Linux
[ 9.170654] Copyright(c) 2003- 2015 Intel Corporation
[ 9.173522] media: Linux media interface: v0.10
[ 9.186033] Linux video capture interface: v2.00
[ 9.193324] iwlwifi 0000:02:00.0: loaded firmware version 17.352738.0 op_mode iwlmvm
[ 9.195766] AVX2 version of gcm_enc/dec engaged.
[ 9.195771] AES CTR mode by8 optimization enabled
[ 9.224614] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (058f:3821)
[ 9.226286] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 9.229336] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input8
[ 9.230030] usbcore: registered new interface driver uvcvideo
[ 9.230033] USB Video Class driver (1.1.1)
[ 9.240171] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
[ 9.240261] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 9.240508] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 9.253223] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 9.253302] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 9.253382] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 9.254671] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 9.254677] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.254680] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 9.254682] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 9.254683] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 9.254687] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x19
[ 9.254690] snd_hda_codec_realtek hdaudioC1D0: Mic=0x18
[ 9.264000] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 9.264068] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 9.313896] cgroup: new mount options do not match the existing superblock, will be ignored
[ 9.317136] random: nonblocking pool is initialized
[ 9.330769] intel_rapl: Found RAPL domain package
[ 9.330774] intel_rapl: Found RAPL domain core
[ 9.330776] intel_rapl: Found RAPL domain uncore
[ 9.330778] intel_rapl: Found RAPL domain dram
[ 9.330783] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 9.330787] intel_rapl: RAPL package 0 domain dram locked by BIOS
[ 9.368614] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 9.563616] cfg80211: World regulatory domain updated:
[ 9.563620] cfg80211: DFS Master region: unset
[ 9.563622] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9.563624] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.563635] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.563637] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.563640] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 9.563642] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 9.563644] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 9.563646] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.563649] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 10.702907] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.829436] r8169 0000:01:00.0 eth0: link down
[ 10.829502] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.888784] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.893683] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 10.893925] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 10.994672] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 10.994908] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 11.016891] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.108463] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.421850] wlan0: authenticate with 00:26:44:f2:fa:a7
[ 14.424384] wlan0: send auth to 00:26:44:f2:fa:a7 (try 1/3)
[ 14.426286] wlan0: authenticated
[ 14.427526] wlan0: associate with 00:26:44:f2:fa:a7 (try 1/3)
[ 14.432372] wlan0: RX AssocResp from 00:26:44:f2:fa:a7 (capab=0x411 status=0 aid=1)
[ 14.436454] wlan0: associated
[ 14.436495] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes readymoko138 a écrit :
appliquer les 2 premières suggestions de grandtoubab
La première suggestion, à savoir
sudo systemd-analyzedonne :
Startup finished in 8.615s (kernel) + 1.230s (userspace) = 9.845sLa seonde suggestion de grandtoubab, à savoir
sudo systemd-analyze blamedonne:
922ms dev-sda1.device
576ms networking.service
412ms apport.service
405ms upower.service
365ms ModemManager.service
363ms accounts-daemon.service
291ms systemd-logind.service
278ms NetworkManager.service
220ms grub-common.service
206ms preload.service
204ms alsa-restore.service
194ms ondemand.service
192ms apparmor.service
187ms lightdm.service
187ms speech-dispatcher.service
184ms irqbalance.service
183ms gpu-manager.service
175ms gdomap.service
165ms avahi-daemon.service
162ms thermald.service
141ms console-setup.service
125ms systemd-udev-trigger.service
91ms plymouth-quit-wait.service
91ms lm-sensors.service
922ms dev-sda1.device
576ms networking.service
412ms apport.service
405ms upower.service
365ms ModemManager.service
363ms accounts-daemon.service
291ms systemd-logind.service
278ms NetworkManager.service
220ms grub-common.service
206ms preload.service
204ms alsa-restore.service
194ms ondemand.service
192ms apparmor.service
187ms lightdm.service
187ms speech-dispatcher.service
184ms irqbalance.service
183ms gpu-manager.service
175ms gdomap.service
165ms avahi-daemon.service
162ms thermald.service
141ms console-setup.service
125ms systemd-udev-trigger.service
91ms plymouth-quit-wait.service
91ms lm-sensors.service
80ms binfmt-support.service
75ms rsyslog.service
75ms keyboard-setup.service
70ms systemd-user-sessions.service
68ms pppd-dns.service
59ms colord.service
57ms udisks2.service
48ms snapd.autoimport.service
43ms polkitd.service
39ms systemd-journald.service
38ms systemd-journal-flush.service
36ms systemd-udevd.service
30ms systemd-modules-load.service
24ms user@1001.service
23ms plymouth-start.service
21ms iio-sensor-proxy.service
21ms wpa_supplicant.service
19ms systemd-tmpfiles-setup-dev.service
19ms sys-kernel-debug.mount
922ms dev-sda1.device
576ms networking.service
412ms apport.service
405ms upower.service
365ms ModemManager.service
363ms accounts-daemon.service
291ms systemd-logind.service
278ms NetworkManager.service
220ms grub-common.service
206ms preload.service
204ms alsa-restore.service
194ms ondemand.service
192ms apparmor.service
187ms lightdm.service
187ms speech-dispatcher.service
184ms irqbalance.service
183ms gpu-manager.service
175ms gdomap.service
165ms avahi-daemon.service
162ms thermald.service
141ms console-setup.service
125ms systemd-udev-trigger.service
91ms plymouth-quit-wait.service
91ms lm-sensors.service
80ms binfmt-support.service
75ms rsyslog.service
75ms keyboard-setup.service
70ms systemd-user-sessions.service
68ms pppd-dns.service
59ms colord.service
57ms udisks2.service
48ms snapd.autoimport.service
43ms polkitd.service
39ms systemd-journald.service
38ms systemd-journal-flush.service
36ms systemd-udevd.service
30ms systemd-modules-load.service
24ms user@1001.service
23ms plymouth-start.service
21ms iio-sensor-proxy.service
21ms wpa_supplicant.service
19ms systemd-tmpfiles-setup-dev.service
19ms sys-kernel-debug.mount
18ms systemd-timesyncd.service
18ms dev-hugepages.mount
17ms systemd-update-utmp.service
15ms systemd-rfkill.service
15ms plymouth-read-write.service
15ms ufw.service
14ms dev-mqueue.mount
13ms systemd-tmpfiles-setup.service
11ms systemd-backlight@backlight:intel_backlight.service
11ms rtkit-daemon.service
11ms proc-sys-fs-binfmt_misc.mount
10ms dns-clean.service
10ms kmod-static-nodes.service
8ms systemd-sysctl.service
7ms systemd-random-seed.service
7ms rc-local.service
7ms resolvconf.service
6ms systemd-update-utmp-runlevel.service
4ms ureadahead-stop.service
3ms systemd-remount-fs.service
3ms sys-fs-fuse-connections.mount
2ms setvtrgb.service
543us snapd.socket
lines 44-66/66 (END)Alors qu'est ce que ça raconte tout ça ?
Et maintenant la question bonus (si tu veux/peux)!
Une histoire de batterie :
En moyenne ma batterie tient 1H30/2H avec le wifi allumé et si je ne regarde pas de vidéo mais le gestionnaire de batterie est complètement incohérent. Il a plusieurs symptômes. Les deux plus importants sont que lorsque la batterie a fini de charger et que je débranche l'ordi, le gestionnaire de batteie reste figé à 100% puis au bout d'un moment reprend le comptage (en général vers 60%). Le second symptôme est plus grave. Parfois, l'ordi s'éteint brusquement (sans alerte de fin de batterie) alors que la seconde précédente le gestionnaire de batterie indiquait encore une réserve raisonnable. Ce dernier symptôme est particulièrement courant quand je regarde des vidéos qui, je suppose, sont très consomatrices d'énergie. Je me demande si c'est la batterie qui déconne ou si c'est le logiciel de gestion de la batterie.
Et il est peut-être aussi utile de dire que cela a directement à voir avec le problème qui m'a amené sur le forum au départ (voir post #1) puisque l'ordi a planté au démarrage suite à un arrêt brusque de l'ordi comme décrit ci-dessus.
J'espère que je suis assez clair. Merci d'avance.
Description technique
ASUSTeK COMPUTER INC. UX310UA
Ubuntu 22.04.3 LTS, 64 bits, Gnome 42.9, Sys fenêtrage Xorg
Hors ligne
#11 Le 27/01/2017, à 21:57
- hazardomadaire
Re : [résolu] Problème boot : acpi et busybox
Allo ? Y a quelqu'un ? J'ai dit une connerie ?
Description technique
ASUSTeK COMPUTER INC. UX310UA
Ubuntu 22.04.3 LTS, 64 bits, Gnome 42.9, Sys fenêtrage Xorg
Hors ligne
#12 Le 27/01/2017, à 22:52
- moko138
Re : [résolu] Problème boot : acpi et busybox
Non, pas de c*nnerie ! Simplement, je n'avais pas vu ta réponse du 22/1 !
Ce soir je ne suis plus très frais : disons à demain !
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#13 Le 28/01/2017, à 04:42
- moko138
Re : [résolu] Problème boot : acpi et busybox
je crois savoir qu'il ne faut jamais transporter un ordi en veille et à fortiori allumé
En veille les têtes sont parquées,
donc pas de souci (il m'est arrivé, par exemple, de mettre mon pc en veille, de mettre le pc dans le sac à dos, d'aller en marchant chez un copain, puis de sortir le pc de veille sans souci).
Quand le pc est en fonctionnnement (pas en veille)
là on peut déplacer la machine mais avec une extrême douceur.
(Par exemple, au boulot, je déplace un portable d'une table à une autre tous les jours ouvrés depuis six mois).
La même précaution s'impose pour un DDE.
Je dis bien : avec une extrême douceur.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#14 Le 28/01/2017, à 05:02
- moko138
Re : [résolu] Problème boot : acpi et busybox
Dans ton dmesg, on a toujours ces deux lignes
[ 1.538757]
[ 1.538794] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDMA
[ 1.538797] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDHC
[ 1.538807] J'ignore leur sens, mais manifestement, ça ne retarde pas le démarrage (15 secondes à partir du lancement du noyau).
As-tu cherché sur la toile ?
- -
Comme souvent, ce qui prend du temps, c'est la connexion réseau :
[ 9.330787]
[ 9.368614] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
(...)
[ 14.436495] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready5 secondes.
Pour la batterie,
fie-toi à PPdM : ./viewtopic.php?pid=15548551#p15548551 et plus particulièrement dans ton cas : ./viewtopic.php?pid=20619511#p20619511 ; tu as peut-être oublié, dans la gestion de l'énergie, de fixer ce seuil supérieur ou égal à 5% ?
Le reste n'est pas de mon ressort et n'est pas l'objet de ce fil.
Dernière modification par moko138 (Le 28/01/2017, à 05:04)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#15 Le 28/01/2017, à 10:05
- xubu1957
Re : [résolu] Problème boot : acpi et busybox
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne