Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 31/01/2017, à 13:56

leo62

[RESOLU] Probleme de l'usb qui se deconnecte quelques secondes

Bonjour la communauté,

Depuis l'installation de xubuntu 12.04 LTS, ma souris bug ....
Au bout de quelques secondes d'inactivité, je n'ai plus la main sur les périphériques branchés sur les USB, cela dure env 3 à 4 secondes....ensuite ca refonctionne, et 3s d'inactivité, ca recommence.........
On dirait que c'est une mise en veille du port usb... J'ai enlevé les mises en veille, mais rien n'y fait.
Voici le retour d'un lsusb :

herber@herber-1018P:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 13d3:5702 IMC Networks UVC VGA Webcam
Bus 002 Device 002: ID 046d:c52e Logitech, Inc.
herber@herber-1018P:~$

Merci pour vos réponses.

Dernière modification par leo62 (Le 01/03/2017, à 20:16)

Hors ligne

#2 Le 03/02/2017, à 04:48

moko138

Re : [RESOLU] Probleme de l'usb qui se deconnecte quelques secondes

Quand ça vient de se produire, donne

dmesg | tail -n 50

Dernière modification par moko138 (Le 05/02/2017, à 18:23)


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#3 Le 03/02/2017, à 15:36

leo62

Re : [RESOLU] Probleme de l'usb qui se deconnecte quelques secondes

Bonjour moko,

herber@herber-1018P:~$ dmesg | tail -n 50
[   18.850929] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.850939] cfg80211: Updating information on frequency 5230 MHz for a 20 MHz width channel with regulatory rule:
[   18.850950] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.850960] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[   18.850971] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.850979] cfg80211: Disabling freq 5260 MHz
[   18.850986] cfg80211: Disabling freq 5280 MHz
[   18.850992] cfg80211: Disabling freq 5300 MHz
[   18.850999] cfg80211: Disabling freq 5320 MHz
[   18.851005] cfg80211: Disabling freq 5500 MHz
[   18.851011] cfg80211: Disabling freq 5520 MHz
[   18.851018] cfg80211: Disabling freq 5540 MHz
[   18.851024] cfg80211: Disabling freq 5560 MHz
[   18.851031] cfg80211: Disabling freq 5580 MHz
[   18.851037] cfg80211: Disabling freq 5600 MHz
[   18.851043] cfg80211: Disabling freq 5620 MHz
[   18.851050] cfg80211: Disabling freq 5640 MHz
[   18.851056] cfg80211: Disabling freq 5660 MHz
[   18.851062] cfg80211: Disabling freq 5680 MHz
[   18.851069] cfg80211: Disabling freq 5700 MHz
[   18.851077] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[   18.851088] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.851097] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[   18.851108] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.851118] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[   18.851129] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.851139] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[   18.851150] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.851159] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[   18.851171] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.851179] cfg80211: Disabling freq 5920 MHz
[   18.851185] cfg80211: Disabling freq 5940 MHz
[   18.851192] cfg80211: Disabling freq 5960 MHz
[   18.851198] cfg80211: Disabling freq 5980 MHz
[   18.851205] cfg80211: Disabling freq 6000 MHz
[   18.851212] cfg80211: Disabling freq 6020 MHz
[   18.851218] cfg80211: Disabling freq 6040 MHz
[   18.851225] cfg80211: Disabling freq 6060 MHz
[   18.851231] cfg80211: Disabling freq 6080 MHz
[   18.851247] cfg80211: World regulatory domain updated:
[   18.851254] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.851264] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.851275] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.851285] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.851295] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.851305] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.049323] asus_wmi: Backlight controlled by ACPI video driver
[   21.484335] [drm] Changing LVDS panel from (-hsync, -vsync) to (+hsync, +vsync)
[   23.340187] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=600
[   23.983863] init: plymouth-stop pre-start process (2254) terminated with status 1
herber@herber-1018P:~$ ^C

Hors ligne

#4 Le 03/02/2017, à 18:14

moko138

Re : [RESOLU] Probleme de l'usb qui se deconnecte quelques secondes

Ce retour de dmesg s'arrête 24 secondes après le lancement du noyau. Je suppose donc que tu utilises 16.04 (ou 16.10) que je connais mal. Mais donne

journalctl -xb

pour montrer les logs du système aux connaisseurs qui sont les bienvenus !


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#5 Le 05/02/2017, à 17:11

leo62

Re : [RESOLU] Probleme de l'usb qui se deconnecte quelques secondes

j'utilise xubuntu lts..... je remarque aussi que ca ne le fait pas quand je branche la souris avant de demarrer le PC. ...
Retour de  journalctl -xb

 herber@herber-1018P:~$ journalctl -xb
journalctl : commande introuvable
herber@herber-1018P:~$   

Hors ligne

#6 Le 05/02/2017, à 17:11

leo62

Re : [RESOLU] Probleme de l'usb qui se deconnecte quelques secondes

xubuntu 12.04 LTS

Hors ligne

#7 Le 05/02/2017, à 18:25

moko138

Re : [RESOLU] Probleme de l'usb qui se deconnecte quelques secondes

Quand ça vient de se produire, donne

dmesg | tail -n 50

et donne aussi

lsb_release -d; printenv GDMSESSION ; uname -mr

Mais je serai peu disponible avant demain soir.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#8 Le 06/02/2017, à 10:06

leo62

Re : [RESOLU] Probleme de l'usb qui se deconnecte quelques secondes

Voila le resultat

herber@herber-1018P:~$ lsb_release -d; printenv GDMSESSION ; uname -mr
Description:	Ubuntu 12.04.5 LTS
xubuntu
3.2.0-121-generic i686
herber@herber-1018P:~$ 

Hors ligne

#9 Le 06/02/2017, à 15:32

leo62

Re : [RESOLU] Probleme de l'usb qui se deconnecte quelques secondes

herber@herber-1018P:~$ dmesg | tail -n 50
[   19.454397] cfg80211: Disabling freq 5500 MHz
[   19.454403] cfg80211: Disabling freq 5520 MHz
[   19.454408] cfg80211: Disabling freq 5540 MHz
[   19.454414] cfg80211: Disabling freq 5560 MHz
[   19.454419] cfg80211: Disabling freq 5580 MHz
[   19.454425] cfg80211: Disabling freq 5600 MHz
[   19.454430] cfg80211: Disabling freq 5620 MHz
[   19.454436] cfg80211: Disabling freq 5640 MHz
[   19.454441] cfg80211: Disabling freq 5660 MHz
[   19.454447] cfg80211: Disabling freq 5680 MHz
[   19.454452] cfg80211: Disabling freq 5700 MHz
[   19.454459] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[   19.454468] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.454476] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[   19.454486] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.454494] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[   19.454504] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.454512] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[   19.454521] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.454529] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[   19.454539] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.454546] cfg80211: Disabling freq 5920 MHz
[   19.454551] cfg80211: Disabling freq 5940 MHz
[   19.454557] cfg80211: Disabling freq 5960 MHz
[   19.454562] cfg80211: Disabling freq 5980 MHz
[   19.454567] cfg80211: Disabling freq 6000 MHz
[   19.454573] cfg80211: Disabling freq 6020 MHz
[   19.454578] cfg80211: Disabling freq 6040 MHz
[   19.454584] cfg80211: Disabling freq 6060 MHz
[   19.454589] cfg80211: Disabling freq 6080 MHz
[   19.454604] cfg80211: World regulatory domain updated:
[   19.454609] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   19.454619] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.454627] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.454636] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.454645] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.454654] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.623927] asus_wmi: Backlight controlled by ACPI video driver
[   21.405892] init: anacron main process (1322) killed by TERM signal
[   21.595977] [drm] Changing LVDS panel from (-hsync, -vsync) to (+hsync, +vsync)
[   23.568054] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=600
[   24.212483] init: plymouth-stop pre-start process (2329) terminated with status 1
[   30.420050] wlan0: no IPv6 routers present
[ 7236.560143] usb 2-2: USB disconnect, device number 2
[ 7239.032083] usb 2-2: new full-speed USB device number 3 using uhci_hcd
[ 7239.224815] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input13
[ 7239.225289] generic-usb 0003:046D:C52E.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
[ 7239.230848] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input14
[ 7239.231444] generic-usb 0003:046D:C52E.0004: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
[ 8347.776824] [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, -vsync)
herber@herber-1018P:~$ 

Hors ligne

#10 Le 06/02/2017, à 20:04

moko138

Re : [RESOLU] Probleme de l'usb qui se deconnecte quelques secondes

On voit des changements usb à 7236 et 7239 secondes :
une déconnexion, suivie d'une reconnexion en usb1 uhci, d'un Logitech USB Receiver (je suppose ensemble clavier-souris sans fil).

1ère question :
En as-tu vérifié la charge de la pile ou de la batterie ?

2ème question :
Pourquoi attends-tu vingt minutes (8347 - 7239) pour donner dmesg | tail -n 50 alors que je t'ai dit, et deux fois,

Quand ça vient de se produire

???


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#11 Le 07/02/2017, à 23:05

leo62

Re : [RESOLU] Probleme de l'usb qui se deconnecte quelques secondes

Voila le resultat en simultané


herber@herber-1018P:~$ dmesg | tail -n 50
[   18.232973] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[   18.232983] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.232991] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[   18.233001] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.233009] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[   18.233018] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.233025] cfg80211: Disabling freq 5920 MHz
[   18.233031] cfg80211: Disabling freq 5940 MHz
[   18.233036] cfg80211: Disabling freq 5960 MHz
[   18.233042] cfg80211: Disabling freq 5980 MHz
[   18.233047] cfg80211: Disabling freq 6000 MHz
[   18.233053] cfg80211: Disabling freq 6020 MHz
[   18.233058] cfg80211: Disabling freq 6040 MHz
[   18.233063] cfg80211: Disabling freq 6060 MHz
[   18.233069] cfg80211: Disabling freq 6080 MHz
[   18.233082] cfg80211: World regulatory domain updated:
[   18.233088] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.233097] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.233106] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.233115] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.233123] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.233132] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.941372] asus_wmi: Backlight controlled by ACPI video driver
[   20.559897] init: anacron main process (1390) killed by TERM signal
[   20.912707] [drm] Changing LVDS panel from (-hsync, -vsync) to (+hsync, +vsync)
[   23.406734] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=600
[   24.245713] init: plymouth-stop pre-start process (2225) terminated with status 1
[  290.848040] wlan0: no IPv6 routers present
[ 6587.843107] [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, -vsync)
[ 6599.200133] usb 2-2: USB disconnect, device number 2
[ 6890.580090] usb 2-2: new full-speed USB device number 3 using uhci_hcd
[ 6893.244093] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input2
[ 6893.250841] input: Logitech Unifying Device. Wireless PID:4009 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0005/input/input13
[ 6893.251511] logitech-djdevice 0003:046D:C52B.0006: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4009] on usb-0000:00:1d.0-2:1
[ 6902.804915] i2c i2c-4: sendbytes: NAK bailout.
[ 6902.824939] i2c i2c-4: sendbytes: NAK bailout.
[ 6902.844929] i2c i2c-4: sendbytes: NAK bailout.
[10290.800082] usb 1-1: new high-speed USB device number 5 using ehci_hcd
[10292.929333] Initializing USB Mass Storage driver...
[10292.937139] scsi4 : usb-storage 1-1:1.0
[10292.937466] usbcore: registered new interface driver usb-storage
[10292.937475] USB Mass Storage support registered.
[10293.937212] scsi 4:0:0:0: Direct-Access     TOSHIBA  TOSHIBA EXT      0    PQ: 0 ANSI: 6
[10293.939923] sd 4:0:0:0: Attached scsi generic sg1 type 0
[10293.945341] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[10293.946322] sd 4:0:0:0: [sdb] Write Protect is off
[10293.946343] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[10293.947326] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[10293.983649]  sdb: sdb1
[10293.986902] sd 4:0:0:0: [sdb] Attached SCSI disk
herber@herber-1018P:~$ 
herber@herber-1018P:~$ 
herber@herber-1018P:~$ 
herber@herber-1018P:~$ lsb_release -d; printenv GDMSESSION ; uname -mr
Description:	Ubuntu 12.04.5 LTS
xubuntu
3.2.0-121-generic i686
herber@herber-1018P:~$ 

Hors ligne

#12 Le 07/02/2017, à 23:07

leo62

Re : [RESOLU] Probleme de l'usb qui se deconnecte quelques secondes

Alors que la pile est à 18%
C'est pareil en charge

Hors ligne

#13 Le 08/02/2017, à 06:44

moko138

Re : [RESOLU] Probleme de l'usb qui se deconnecte quelques secondes

Maintenant, on voit une heure entre la déconnexion et le lancement de dmesg :

[ 6599.200133] usb 2-2: USB disconnect, device number 2
(...)
[10293.986902] sd 4:0:0:0: [sdb] Attached SCSI disk

10293 - 6599 secondes = 61' 34".

Comment l'expliques-tu ?


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#14 Le 08/02/2017, à 19:13

leo62

Re : [RESOLU] Probleme de l'usb qui se deconnecte quelques secondes

Voilà, et si ca peut t'aider, quand je suis sur secteur, pas de Pb, seulement sur batterie.
C'est pas une mise en veille quand la batterie est seulement branchée ?
J'ai essayé de voir les paramètres de veille mais rien à faire


herber@herber-1018P:~$ dmesg | tail -n 50
[   18.290767] cfg80211: Updating information on frequency 5230 MHz for a 20 MHz width channel with regulatory rule:
[   18.290778] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.290788] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[   18.290799] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.290807] cfg80211: Disabling freq 5260 MHz
[   18.290813] cfg80211: Disabling freq 5280 MHz
[   18.290819] cfg80211: Disabling freq 5300 MHz
[   18.290826] cfg80211: Disabling freq 5320 MHz
[   18.290832] cfg80211: Disabling freq 5500 MHz
[   18.290838] cfg80211: Disabling freq 5520 MHz
[   18.290844] cfg80211: Disabling freq 5540 MHz
[   18.290851] cfg80211: Disabling freq 5560 MHz
[   18.290857] cfg80211: Disabling freq 5580 MHz
[   18.290863] cfg80211: Disabling freq 5600 MHz
[   18.290870] cfg80211: Disabling freq 5620 MHz
[   18.290876] cfg80211: Disabling freq 5640 MHz
[   18.290883] cfg80211: Disabling freq 5660 MHz
[   18.290890] cfg80211: Disabling freq 5680 MHz
[   18.290896] cfg80211: Disabling freq 5700 MHz
[   18.290904] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[   18.290915] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.290925] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[   18.290936] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.290946] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[   18.290957] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.290966] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[   18.290977] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.290987] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[   18.290998] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.291006] cfg80211: Disabling freq 5920 MHz
[   18.291012] cfg80211: Disabling freq 5940 MHz
[   18.291018] cfg80211: Disabling freq 5960 MHz
[   18.291025] cfg80211: Disabling freq 5980 MHz
[   18.291031] cfg80211: Disabling freq 6000 MHz
[   18.291037] cfg80211: Disabling freq 6020 MHz
[   18.291044] cfg80211: Disabling freq 6040 MHz
[   18.291051] cfg80211: Disabling freq 6060 MHz
[   18.291057] cfg80211: Disabling freq 6080 MHz
[   18.291072] cfg80211: World regulatory domain updated:
[   18.291079] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.291090] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.291100] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.291110] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.291120] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.291131] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.397095] asus_wmi: Backlight controlled by ACPI video driver
[   21.051521] init: anacron main process (1359) killed by TERM signal
[   23.702689] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=600
[   24.881266] init: plymouth-stop pre-start process (2370) terminated with status 1
[   30.936042] wlan0: no IPv6 routers present
herber@herber-1018P:~$ 
herber@herber-1018P:~$ lsb_release -d; printenv GDMSESSION ; uname -mr
Description:	Ubuntu 12.04.5 LTS
xubuntu
3.2.0-121-generic i686
herber@herber-1018P:~$ 

Dernière modification par leo62 (Le 08/02/2017, à 19:19)

Hors ligne

#15 Le 08/02/2017, à 19:49

moko138

Re : [RESOLU] Probleme de l'usb qui se deconnecte quelques secondes

Je sors de ce fil.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#16 Le 08/02/2017, à 22:44

leo62

Re : [RESOLU] Probleme de l'usb qui se deconnecte quelques secondes

Ben merci quand même !!!

Hors ligne

#17 Le 08/02/2017, à 22:46

leo62

Re : [RESOLU] Probleme de l'usb qui se deconnecte quelques secondes

S'il n'y a pas quelqu'un de compétant dans ce domaine qui puisse m'aider ?

Hors ligne

#18 Le 01/03/2017, à 20:33

leo62

Re : [RESOLU] Probleme de l'usb qui se deconnecte quelques secondes

J'ai simplement désinstallé laptop-mode-tools, pas moyen de le régler pour ne pas mettre en veille les usb.

Longue vie à la communauté.

Hors ligne