#1 Le 07/01/2017, à 11:29
- Franck roger
lenteur et lag ubuntu 16 sur msi ge 72 6qd 476xfr
Bonjour,
Je me tourne vers vous suite à mes problèmes après installation de ubuntu 16.04
J'ai demandé de l'aide par ici https://forum.ubuntu-fr.org/viewtopic.php?id=2002550 mais je penche de plus en plus pour un problème graphique donc je viens vous voir pour des conseils.
Pour résumer:
- le live usb ne se lance qu'avec l'option nomodeset
- en live session le système est fluide je peux afficher normalement mes fenêtres et les déplacer sans lag.
- un fois installé c'est pas du tout la même histoire : ça lagge!!! rien ne va vite, les fenêtres apparaissent par bloc ou ne disparaissent pas avant que je clique sur une autre icône.
est ce que le nomodeset peut déjà m'aider à fluidifier le tout? ou le mettre?
J'ai deja essayé de faire des changements sur
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"avec nomodeset ou rcutree.rcu_idle_gp_delay=1 où je ne trouve plus la ligne complète, un truc en i915...
J'ai déjà installé plusieurs fois l'OS car après certaines manipulations comme mettre à jour les pilotes nvidia propriétaire je me retrouve soit dans le cas ou le démarrage ne finit pas, soit il me demande le mot de passe admin à l'infini.
roger@roger-GE72-6QD:~$ free -m
total utilisé libre partagé tamp/cache disponible
Mem: 7864 840 6378 18 644 6734
Partition d'échange: 8070 0 8070
roger@roger-GE72-6QD:~$ sudo lshw -c video
[sudo] Mot de passe de roger :
*-display NON-RÉCLAMÉ
description: 3D controller
produit: GM107M [GeForce GTX 960M]
fabriquant: NVIDIA Corporation
identifiant matériel: 0
information bus: pci@0000:01:00.0
version: a2
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: latency=0
ressources: mémoire:de000000-deffffff mémoire:c0000000-cfffffff mémoire:d0000000-d1ffffff portE/S:e000(taille=128) mémoire:df000000-df07ffff
*-display NON-RÉCLAMÉ
description: VGA compatible controller
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 2
information bus: pci@0000:00:02.0
version: 06
bits: 64 bits
horloge: 33MHz
fonctionnalités: pciexpress msi pm vga_controller bus_master cap_list
configuration: latency=0
ressources: mémoire:dd000000-ddffffff mémoire:b0000000-bfffffff portE/S:f000(taille=64)
roger@roger-GE72-6QD:~$ sudo ubuntu-drivers devices
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
modalias : pci:v000010DEd0000139Bsv00001462sd0000115Bbc03sc02i00
model : GM107M [GeForce GTX 960M]
vendor : NVIDIA Corporation
driver : nvidia-367 - distro non-free recommended
driver : xserver-xorg-video-nouveau - distro free builtin
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
roger@roger-GE72-6QD:~$ gnome-system-monitorle fichier /etc/X11/xorg.conf me lance une page blanche
ci dessous le contenue de Xorg.0.log
[ 13.800]
X.Org X Server 1.18.3
Release Date: 2016-04-04
[ 13.800] X Protocol Version 11, Revision 0
[ 13.800] Build Operating System: Linux 3.13.0-86-generic x86_64 Ubuntu
[ 13.800] Current Operating System: Linux roger-GE72-6QD 4.4.0-31-generic #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 2016 x86_64
[ 13.800] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-31-generic root=UUID=3abc75f3-5001-484a-886c-d704f28eabb7 ro nomodeset quiet splash vt.handoff=7
[ 13.800] Build Date: 18 May 2016 01:07:07AM
[ 13.800] xorg-server 2:1.18.3-1ubuntu2.2 (For technical support please see http://www.ubuntu.com/support)
[ 13.800] Current version of pixman: 0.33.6
[ 13.800] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.800] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.800] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 7 09:37:14 2017
[ 14.010] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 14.020] (==) No Layout section. Using the first Screen section.
[ 14.020] (==) No screen section available. Using defaults.
[ 14.020] (**) |-->Screen "Default Screen Section" (0)
[ 14.020] (**) | |-->Monitor "<default monitor>"
[ 14.105] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 14.105] (==) Automatically adding devices
[ 14.105] (==) Automatically enabling devices
[ 14.105] (==) Automatically adding GPU devices
[ 14.105] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 14.105] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 14.105] Entry deleted from font path.
[ 14.105] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 14.105] Entry deleted from font path.
[ 14.105] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 14.105] Entry deleted from font path.
[ 14.105] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 14.105] Entry deleted from font path.
[ 14.105] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 14.105] Entry deleted from font path.
[ 14.105] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 14.105] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 14.105] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 14.105] (II) Loader magic: 0x557994acdda0
[ 14.105] (II) Module ABI versions:
[ 14.105] X.Org ANSI C Emulation: 0.4
[ 14.105] X.Org Video Driver: 20.0
[ 14.105] X.Org XInput driver : 22.1
[ 14.105] X.Org Server Extension : 9.0
[ 14.106] (++) using VT number 7
[ 14.106] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 14.106] (--) PCI:*(0:0:2:0) 8086:191b:1462:115b rev 6, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64
[ 14.107] (--) PCI: (0:1:0:0) 10de:139b:1462:115b rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 14.107] (II) LoadModule: "glx"
[ 14.179] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 14.532] (II) Module glx: vendor="X.Org Foundation"
[ 14.532] compiled for 1.18.3, module version = 1.0.0
[ 14.532] ABI class: X.Org Server Extension, version 9.0
[ 14.532] (==) AIGLX enabled
[ 14.532] (==) Matched intel as autoconfigured driver 0
[ 14.532] (==) Matched modesetting as autoconfigured driver 1
[ 14.532] (==) Matched fbdev as autoconfigured driver 2
[ 14.532] (==) Matched vesa as autoconfigured driver 3
[ 14.532] (==) Assigned the driver to the xf86ConfigLayout
[ 14.532] (II) LoadModule: "intel"
[ 14.532] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 14.647] (II) Module intel: vendor="X.Org Foundation"
[ 14.647] compiled for 1.18.1, module version = 2.99.917
[ 14.647] Module class: X.Org Video Driver
[ 14.647] ABI class: X.Org Video Driver, version 20.0
[ 14.647] (II) LoadModule: "modesetting"
[ 14.648] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 14.659] (II) Module modesetting: vendor="X.Org Foundation"
[ 14.659] compiled for 1.18.3, module version = 1.18.3
[ 14.659] Module class: X.Org Video Driver
[ 14.659] ABI class: X.Org Video Driver, version 20.0
[ 14.659] (II) LoadModule: "fbdev"
[ 14.659] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 14.668] (II) Module fbdev: vendor="X.Org Foundation"
[ 14.668] compiled for 1.18.1, module version = 0.4.4
[ 14.668] Module class: X.Org Video Driver
[ 14.668] ABI class: X.Org Video Driver, version 20.0
[ 14.668] (II) LoadModule: "vesa"
[ 14.668] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 14.680] (II) Module vesa: vendor="X.Org Foundation"
[ 14.680] compiled for 1.18.1, module version = 2.3.4
[ 14.680] Module class: X.Org Video Driver
[ 14.680] ABI class: X.Org Video Driver, version 20.0
[ 14.680] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 14.680] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 14.680] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 14.680] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 14.680] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 14.680] (II) FBDEV: driver for framebuffer: fbdev
[ 14.680] (II) VESA: driver for VESA chipsets: vesa
[ 14.847] (EE) open /dev/dri/card0: No such file or directory
[ 14.847] (WW) Falling back to old probe method for modesetting
[ 14.847] (EE) open /dev/dri/card0: No such file or directory
[ 14.847] (II) Loading sub module "fbdevhw"
[ 14.847] (II) LoadModule: "fbdevhw"
[ 14.847] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 14.852] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 14.852] compiled for 1.18.3, module version = 0.0.2
[ 14.852] ABI class: X.Org Video Driver, version 20.0
[ 14.852] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[ 14.852] (II) FBDEV(1): using default device
[ 14.852] (WW) Falling back to old probe method for vesa
[ 14.852] (EE) Screen 0 deleted because of no matching config section.
[ 14.852] (II) UnloadModule: "modesetting"
[ 14.852] (II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 14.852] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[ 14.852] (==) FBDEV(0): RGB weight 888
[ 14.852] (==) FBDEV(0): Default visual is TrueColor
[ 14.852] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 14.852] (II) FBDEV(0): hardware: VESA VGA (video memory: 8128kB)
[ 14.852] (II) FBDEV(0): checking modes against framebuffer device...
[ 14.852] (II) FBDEV(0): checking modes against monitor...
[ 14.852] (--) FBDEV(0): Virtual size is 1920x1080 (pitch 1920)
[ 14.852] (**) FBDEV(0): Built-in mode "current": 207.4 MHz, 85.3 kHz, 77.2 Hz
[ 14.852] (II) FBDEV(0): Modeline "current"x0.0 207.38 1920 1952 2192 2432 1080 1084 1088 1104 -hsync -vsync -csync (85.3 kHz b)
[ 14.852] (==) FBDEV(0): DPI set to (96, 96)
[ 14.852] (II) Loading sub module "fb"
[ 14.852] (II) LoadModule: "fb"
[ 14.852] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 14.860] (II) Module fb: vendor="X.Org Foundation"
[ 14.860] compiled for 1.18.3, module version = 1.0.0
[ 14.860] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.860] (**) FBDEV(0): using shadow framebuffer
[ 14.860] (II) Loading sub module "shadow"
[ 14.860] (II) LoadModule: "shadow"
[ 14.860] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 14.866] (II) Module shadow: vendor="X.Org Foundation"
[ 14.866] compiled for 1.18.3, module version = 1.1.0
[ 14.866] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.866] (II) UnloadModule: "vesa"
[ 14.866] (II) Unloading vesa
[ 14.866] (==) Depth 24 pixmap format is 32 bpp
[ 14.866] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[ 14.892] (==) FBDEV(0): Backing store enabled
[ 14.892] (==) FBDEV(0): DPMS enabled
[ 14.894] (==) RandR enabled
[ 14.913] (II) SELinux: Disabled on system
[ 14.914] (II) AIGLX: Screen 0 is not DRI2 capable
[ 14.914] (EE) AIGLX: reverting to software rendering
[ 15.970] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 15.970] (II) AIGLX: Loaded and initialized swrast
[ 15.970] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 16.194] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 16.194] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.194] (II) LoadModule: "evdev"
[ 16.194] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.212] (II) Module evdev: vendor="X.Org Foundation"
[ 16.212] compiled for 1.18.1, module version = 2.10.1
[ 16.212] Module class: X.Org XInput Driver
[ 16.212] ABI class: X.Org XInput driver, version 22.1
[ 16.212] (II) Using input driver 'evdev' for 'Power Button'
[ 16.212] (**) Power Button: always reports core events
[ 16.212] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 16.212] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.212] (--) evdev: Power Button: Found keys
[ 16.212] (II) evdev: Power Button: Configuring as keyboard
[ 16.212] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 16.212] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.212] (**) Option "xkb_rules" "evdev"
[ 16.212] (**) Option "xkb_model" "pc105"
[ 16.212] (**) Option "xkb_layout" "fr"
[ 16.212] (**) Option "xkb_variant" "oss"
[ 16.243] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 16.243] (II) No input driver specified, ignoring this device.
[ 16.243] (II) This device may have been added with another device file.
[ 16.243] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 16.243] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.243] (II) Using input driver 'evdev' for 'Power Button'
[ 16.243] (**) Power Button: always reports core events
[ 16.243] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 16.243] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.243] (--) evdev: Power Button: Found keys
[ 16.243] (II) evdev: Power Button: Configuring as keyboard
[ 16.244] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 16.244] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 16.244] (**) Option "xkb_rules" "evdev"
[ 16.244] (**) Option "xkb_model" "pc105"
[ 16.244] (**) Option "xkb_layout" "fr"
[ 16.244] (**) Option "xkb_variant" "oss"
[ 16.244] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 16.244] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 16.244] (II) Using input driver 'evdev' for 'Sleep Button'
[ 16.244] (**) Sleep Button: always reports core events
[ 16.244] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 16.244] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 16.244] (--) evdev: Sleep Button: Found keys
[ 16.244] (II) evdev: Sleep Button: Configuring as keyboard
[ 16.244] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 16.244] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 16.244] (**) Option "xkb_rules" "evdev"
[ 16.244] (**) Option "xkb_model" "pc105"
[ 16.244] (**) Option "xkb_layout" "fr"
[ 16.244] (**) Option "xkb_variant" "oss"
[ 16.244] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[ 16.244] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 16.244] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 16.244] (**) Logitech USB Receiver: always reports core events
[ 16.244] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event5"
[ 16.300] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 16.300] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 16.300] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 16.300] (--) evdev: Logitech USB Receiver: Found relative axes
[ 16.300] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 16.300] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 16.300] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 16.300] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 16.300] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.300] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:046D:C52F.0002/input/input7/event5"
[ 16.300] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 9)
[ 16.300] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 16.300] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 16.300] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 16.300] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 16.300] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 16.300] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 16.300] (II) No input driver specified, ignoring this device.
[ 16.300] (II) This device may have been added with another device file.
[ 16.300] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[ 16.300] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 16.301] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 16.301] (**) Logitech USB Receiver: always reports core events
[ 16.301] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event6"
[ 16.301] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 16.301] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 16.301] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 16.301] (--) evdev: Logitech USB Receiver: Found relative axes
[ 16.301] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 16.301] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 16.301] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 16.301] (--) evdev: Logitech USB Receiver: Found keys
[ 16.301] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 16.301] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 16.301] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 16.301] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 16.301] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.301] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046D:C52F.0003/input/input8/event6"
[ 16.301] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[ 16.301] (**) Option "xkb_rules" "evdev"
[ 16.301] (**) Option "xkb_model" "pc105"
[ 16.301] (**) Option "xkb_layout" "fr"
[ 16.301] (**) Option "xkb_variant" "oss"
[ 16.301] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 16.301] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 16.301] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 16.301] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 16.301] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 16.301] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 16.301] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[ 16.301] (II) No input driver specified, ignoring this device.
[ 16.301] (II) This device may have been added with another device file.
[ 16.301] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[ 16.301] (II) No input driver specified, ignoring this device.
[ 16.301] (II) This device may have been added with another device file.
[ 16.301] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 16.301] (II) No input driver specified, ignoring this device.
[ 16.301] (II) This device may have been added with another device file.
[ 16.302] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event12)
[ 16.302] (II) No input driver specified, ignoring this device.
[ 16.302] (II) This device may have been added with another device file.
[ 16.302] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event13)
[ 16.302] (II) No input driver specified, ignoring this device.
[ 16.302] (II) This device may have been added with another device file.
[ 16.302] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 16.302] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.302] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 16.302] (**) AT Translated Set 2 keyboard: always reports core events
[ 16.302] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 16.302] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 16.302] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 16.302] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 16.302] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 16.302] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 16.302] (**) Option "xkb_rules" "evdev"
[ 16.302] (**) Option "xkb_model" "pc105"
[ 16.302] (**) Option "xkb_layout" "fr"
[ 16.302] (**) Option "xkb_variant" "oss"
[ 16.303] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 16.303] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 16.303] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[ 16.303] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 16.303] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 16.303] (II) LoadModule: "synaptics"
[ 16.303] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 16.311] (II) Module synaptics: vendor="X.Org Foundation"
[ 16.311] compiled for 1.18.1, module version = 1.8.2
[ 16.311] Module class: X.Org XInput Driver
[ 16.311] ABI class: X.Org XInput driver, version 22.1
[ 16.311] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 16.311] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 16.311] (**) Option "Device" "/dev/input/event7"
[ 16.356] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 16.356] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5706 (res 44)
[ 16.356] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4800 (res 65)
[ 16.356] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 16.356] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 16.356] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 16.356] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 16.356] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 16.356] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 16.380] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event7"
[ 16.380] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 16.380] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 16.380] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 16.380] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[ 16.380] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 16.380] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 16.380] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 16.380] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 16.380] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 16.380] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 16.380] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 16.381] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event8)
[ 16.381] (**) MSI WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 16.381] (II) Using input driver 'evdev' for 'MSI WMI hotkeys'
[ 16.381] (**) MSI WMI hotkeys: always reports core events
[ 16.381] (**) evdev: MSI WMI hotkeys: Device: "/dev/input/event8"
[ 16.381] (--) evdev: MSI WMI hotkeys: Vendor 0 Product 0
[ 16.381] (--) evdev: MSI WMI hotkeys: Found keys
[ 16.381] (II) evdev: MSI WMI hotkeys: Configuring as keyboard
[ 16.381] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event8"
[ 16.381] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 13)
[ 16.381] (**) Option "xkb_rules" "evdev"
[ 16.381] (**) Option "xkb_model" "pc105"
[ 16.381] (**) Option "xkb_layout" "fr"
[ 16.381] (**) Option "xkb_variant" "oss".Dernière modification par Franck roger (Le 07/01/2017, à 16:13)
Hors ligne
#2 Le 14/02/2017, à 19:28
- [Linux]Uncle_Sam
Re : lenteur et lag ubuntu 16 sur msi ge 72 6qd 476xfr
Bonjour,
J'ai un MSI GP72 6QE et j'ai eu quelques petits soucis.
Pour faire simple, il faut upgrader le kernel vers une version supérieure qui va prendre en charge les nouvelles instructions intel/nvidia pour ensuite mettre le gros paquet de nvidia.
J'ai mis la version 4.7 qui a régler tous mes soucis (lag, plantage, freeze + raccourcis clavier), mais je n'ai pas "pris le temps" de voir pour nvidia.
Voici le lien de la conversation : https://bugzilla.kernel.org/show_bug.cgi?id=119831
Je n'ai pas mis à jour depuis et bien intéressé de savoir si j'ai un bout de temps de finir la procédure pour la carte graphique.
Bonne journée
Hors ligne