Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 16/02/2017, à 19:03

fprotais

Problème de démarrage après installation.

Bonjour,
   J'ai eu un problème récemment sur un de mes pcs. Il était sous windows et celui ci ne pouvait plus démarrer (même en passant par le mode récupération). En passant par une live-USB j'ai réussi a récupérer toutes mes données étant sur /D: mais je n'avais aucun accès a /C:. Il semblerait donc que mon disque dur soit endommager. J'ai décider d'essayer d'installer Ubuntu dessus, en essayant d'éviter les parties abîmées du disque. J'ai fait tourner "fsck" et il a trouvé aucune erreur sur les partitions sur lesquelles je voulais installer ubuntu.

   L'installation de ubuntu se passe sans soucis lorsque je choisis moi même mes partitions. Mais lorsque je démarre sur ubuntu, j'ai un écran noir, sans même que le grub se lance. J'ai essayer de faire tourner boot-repair mais celui se lance dans une boucle de : "La réparation du système de fichiers nécessite le démontage des partitions. Veuillez fermer tous vos programmes. Puis fermez cette fenêtre." infinie.
Voici le rapport BootInfo : BootInfo., l'une des partitions étant "cassée".
Mon pc est un : Acer Aspire X3200 datant de 2008, avec donc un BIOS.
                CPU : Athlon(tm) Dual Core Processor 4450e.
J'aimerais savoir si je dois quoi qu'il arrive changer de disque dur, ou il existe encore un espoir de voir tourner ubuntu sur la machine telle quelle.
Merci d'avance smile

Hors ligne

#2 Le 16/02/2017, à 19:10

malbo

Re : Problème de démarrage après installation.

Ton Boot-Info est là :

     

 Boot Info Script cfd9efe + Boot-Repair extra info      [Boot-Info 26Apr2016]


============================= Boot Info Summary: ===============================

 => libparted MBR boot code is installed in the MBR of /dev/sda.
 => No known boot loader is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  Grub2 (v1.99-2.00)
    Boot sector info:  Grub2 (v2.00) is installed in the boot sector of sda2 
                       and looks at sector 67500544 of the same hard drive 
                       for core.img. core.img is at this location and looks 
                       for (,msdos2)/boot/grub. It also embeds following 
                       components:
                       
                       modules
                       -------------------------------------------------------
                       fshelp ext2 part_msdos biosdisk
                       -------------------------------------------------------
    Operating System:  Ubuntu 16.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda4: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: wrong fs type, bad option, bad superblock on /dev/sda4,
       missing codepage or helper program, or other error

       In some cases useful info is found in syslog - try
       dmesg | tail or so.

sdb1: __________________________________________________________________________

    File system:       iso9660
    Boot sector type:  Unknown
    Boot sector info: 
    Mounting failed:   mount: wrong fs type, bad option, bad superblock on /dev/sda4,
       missing codepage or helper program, or other error

       In some cases useful info is found in syslog - try
       dmesg | tail or so.
mount: /dev/sdb1 is already mounted or /mnt/BootInfo/sdb1 busy

sdb2: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT16
    Boot sector info:  According to the info in the boot sector, sdb2 starts 
                       at sector 0. But according to the info from fdisk, 
                       sdb2 starts at sector 2927216. According to the info 
                       in the boot sector, sdb2 has 0 sectors.
    Mounting failed:   mount: wrong fs type, bad option, bad superblock on /dev/sda4,
       missing codepage or helper program, or other error

       In some cases useful info is found in syslog - try
       dmesg | tail or so.
mount: /dev/sdb1 is already mounted or /mnt/BootInfo/sdb1 busy
mount: /dev/sdb2 is already mounted or /mnt/BootInfo/sdb2 busy

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 298.1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1         195,311,616   625,141,759   429,830,144  83 Linux
/dev/sda2    *     58,593,280   195,311,615   136,718,336  83 Linux
/dev/sda3          42,969,088    58,593,279    15,624,192  82 Linux swap / Solaris
/dev/sda4               2,048    42,969,087    42,967,040  83 Linux


Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 2 GiB, 2106834944 bytes, 4114912 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *              0     2,955,679     2,955,680   0 Empty
/dev/sdb2           2,927,216     2,931,951         4,736  ef EFI (FAT-12/16/32)

/dev/sdb1 overlaps with /dev/sdb2

GUID Partition Table detected, but does not seem to be used.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sdb1   +  R              0     2,955,623     2,955,624 Data partition (Windows/Linux)
/dev/sdb2   +  R      2,927,216     2,931,951         4,736 Data partition (Windows/Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        18df1a2f-37f3-4c46-9ac5-6315978ca91a   ext4       
/dev/sda2        d0272111-0f27-46eb-b3c2-6c4a4dccbead   ext4       
/dev/sda3        7d7c6a00-090f-42f0-a4bb-51d2f9c5987b   swap       
/dev/sda4        be5bd11b-3a69-43f9-bf4f-21bc4f169edd   ext4       
/dev/sdb1        2016-07-19-21-27-51-00                 iso9660    Ubuntu 16.04.1 LTS amd64
/dev/sdb2        0F7B-9366                              vfat       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Feb 16 17:16 ata-HL-DT-ST_DVDRAM_GH15F_K5I87ME4842 -> ../../sr0
lrwxrwxrwx 1 root root  9 Feb 16 17:27 ata-WDC_WD3200AAJS-22B4A0_WD-WCAT13893203 -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 16 17:27 ata-WDC_WD3200AAJS-22B4A0_WD-WCAT13893203-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Feb 16 17:27 ata-WDC_WD3200AAJS-22B4A0_WD-WCAT13893203-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Feb 16 17:27 ata-WDC_WD3200AAJS-22B4A0_WD-WCAT13893203-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Feb 16 17:27 ata-WDC_WD3200AAJS-22B4A0_WD-WCAT13893203-part4 -> ../../sda4
lrwxrwxrwx 1 root root  9 Feb 16 17:35 usb-Generic-_Multi-Card_20060413092100000-0:0 -> ../../sdc
lrwxrwxrwx 1 root root  9 Feb 16 17:27 usb-__CCBB0608160927480519484300-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Feb 16 17:27 usb-__CCBB0608160927480519484300-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Feb 16 17:27 usb-__CCBB0608160927480519484300-0:0-part2 -> ../../sdb2
lrwxrwxrwx 1 root root  9 Feb 16 17:16 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root  9 Feb 16 17:27 wwn-0x50014ee1569a31eb -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 16 17:27 wwn-0x50014ee1569a31eb-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Feb 16 17:27 wwn-0x50014ee1569a31eb-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Feb 16 17:27 wwn-0x50014ee1569a31eb-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Feb 16 17:27 wwn-0x50014ee1569a31eb-part4 -> ../../sda4

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb         /cdrom                   iso9660    (ro,noatime)


=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  d0272111-0f27-46eb-b3c2-6c4a4dccbead
else
  search --no-floppy --fs-uuid --set=root d0272111-0f27-46eb-b3c2-6c4a4dccbead
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=0
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 0 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d0272111-0f27-46eb-b3c2-6c4a4dccbead' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  d0272111-0f27-46eb-b3c2-6c4a4dccbead
	else
	  search --no-floppy --fs-uuid --set=root d0272111-0f27-46eb-b3c2-6c4a4dccbead
	fi
	linux	/boot/vmlinuz-4.4.0-31-generic root=UUID=d0272111-0f27-46eb-b3c2-6c4a4dccbead ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.4.0-31-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-d0272111-0f27-46eb-b3c2-6c4a4dccbead' {
	menuentry 'Ubuntu, avec Linux 4.4.0-31-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-advanced-d0272111-0f27-46eb-b3c2-6c4a4dccbead' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  d0272111-0f27-46eb-b3c2-6c4a4dccbead
		else
		  search --no-floppy --fs-uuid --set=root d0272111-0f27-46eb-b3c2-6c4a4dccbead
		fi
		echo	'Chargement de Linux 4.4.0-31-generic…'
		linux	/boot/vmlinuz-4.4.0-31-generic root=UUID=d0272111-0f27-46eb-b3c2-6c4a4dccbead ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-31-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-31-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-init-upstart-d0272111-0f27-46eb-b3c2-6c4a4dccbead' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  d0272111-0f27-46eb-b3c2-6c4a4dccbead
		else
		  search --no-floppy --fs-uuid --set=root d0272111-0f27-46eb-b3c2-6c4a4dccbead
		fi
		echo	'Chargement de Linux 4.4.0-31-generic…'
		linux	/boot/vmlinuz-4.4.0-31-generic root=UUID=d0272111-0f27-46eb-b3c2-6c4a4dccbead ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-31-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-31-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-recovery-d0272111-0f27-46eb-b3c2-6c4a4dccbead' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  d0272111-0f27-46eb-b3c2-6c4a4dccbead
		else
		  search --no-floppy --fs-uuid --set=root d0272111-0f27-46eb-b3c2-6c4a4dccbead
		fi
		echo	'Chargement de Linux 4.4.0-31-generic…'
		linux	/boot/vmlinuz-4.4.0-31-generic root=UUID=d0272111-0f27-46eb-b3c2-6c4a4dccbead ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-31-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  d0272111-0f27-46eb-b3c2-6c4a4dccbead
	else
	  search --no-floppy --fs-uuid --set=root d0272111-0f27-46eb-b3c2-6c4a4dccbead
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  d0272111-0f27-46eb-b3c2-6c4a4dccbead
	else
	  search --no-floppy --fs-uuid --set=root d0272111-0f27-46eb-b3c2-6c4a4dccbead
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=d0272111-0f27-46eb-b3c2-6c4a4dccbead /               ext4    errors=remount-ro 0       1
# /home was on /dev/sda1 during installation
UUID=18df1a2f-37f3-4c46-9ac5-6315978ca91a /home           ext4    defaults        0       2
# swap was on /dev/sda3 during installation
UUID=7d7c6a00-090f-42f0-a4bb-51d2f9c5987b none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  32.105716705 = 34.473250816   boot/grub/grub.cfg                             1
  32.186790466 = 34.560303104   boot/grub/i386-pc/core.img                     1
  29.051483154 = 31.193792512   boot/vmlinuz-4.4.0-31-generic                  2
  29.051483154 = 31.193792512   vmlinuz                                        2
  32.791011810 = 35.209080832   boot/initrd.img-4.4.0-31-generic               2
  32.791011810 = 35.209080832   initrd.img                                     2

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown MBR on /dev/sdb

00000000  45 52 08 00 00 00 90 90  00 00 00 00 00 00 00 00  |ER..............|
00000010  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000020  33 ed fa 8e d5 bc 00 7c  fb fc 66 31 db 66 31 c9  |3......|..f1.f1.|
00000030  66 53 66 51 06 57 8e dd  8e c5 52 be 00 7c bf 00  |fSfQ.W....R..|..|
00000040  06 b9 00 01 f3 a5 ea 4b  06 00 00 52 b4 41 bb aa  |.......K...R.A..|
00000050  55 31 c9 30 f6 f9 cd 13  72 16 81 fb 55 aa 75 10  |U1.0....r...U.u.|
00000060  83 e1 01 74 0b 66 c7 06  f1 06 b4 42 eb 15 eb 00  |...t.f.....B....|
00000070  5a 51 b4 08 cd 13 83 e1  3f 5b 51 0f b6 c6 40 50  |ZQ......?[Q...@P|
00000080  f7 e1 53 52 50 bb 00 7c  b9 04 00 66 a1 b0 07 e8  |..SRP..|...f....|
00000090  44 00 0f 82 80 00 66 40  80 c7 02 e2 f2 66 81 3e  |D.....f@.....f.>|
000000a0  40 7c fb c0 78 70 75 09  fa bc ec 7b ea 44 7c 00  |@|..xpu....{.D|.|
000000b0  00 e8 83 00 69 73 6f 6c  69 6e 75 78 2e 62 69 6e  |....isolinux.bin|
000000c0  20 6d 69 73 73 69 6e 67  20 6f 72 20 63 6f 72 72  | missing or corr|
000000d0  75 70 74 2e 0d 0a 66 60  66 31 d2 66 03 06 f8 7b  |upt...f`f1.f...{|
000000e0  66 13 16 fc 7b 66 52 66  50 06 53 6a 01 6a 10 89  |f...{fRfP.Sj.j..|
000000f0  e6 66 f7 36 e8 7b c0 e4  06 88 e1 88 c5 92 f6 36  |.f.6.{.........6|
00000100  ee 7b 88 c6 08 e1 41 b8  01 02 8a 16 f2 7b cd 13  |.{....A......{..|
00000110  8d 64 10 66 61 c3 e8 1e  00 4f 70 65 72 61 74 69  |.d.fa....Operati|
00000120  6e 67 20 73 79 73 74 65  6d 20 6c 6f 61 64 20 65  |ng system load e|
00000130  72 72 6f 72 2e 0d 0a 5e  ac b4 0e 8a 3e 62 04 b3  |rror...^....>b..|
00000140  07 cd 10 3c 0a 75 f1 cd  18 f4 eb fd 00 00 00 00  |...<.u..........|
00000150  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000160  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000170  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000190  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001b0  fc 85 2c 00 00 00 00 00  e7 63 a8 40 00 00 80 00  |..,......c.@....|
000001c0  01 00 00 5a e0 f6 00 00  00 00 a0 19 2d 00 00 fe  |...Z........-...|
000001d0  ff ff ef fe ff ff 70 aa  2c 00 80 12 00 00 00 00  |......p.,.......|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


/dev/sdb1: unknown GPT attributes
1000000000000001

/dev/sdb2: unknown GPT attributes
1000000000000001
Unknown BootLoader on sdb1

00000000  45 52 08 00 00 00 90 90  00 00 00 00 00 00 00 00  |ER..............|
00000010  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000020  33 ed fa 8e d5 bc 00 7c  fb fc 66 31 db 66 31 c9  |3......|..f1.f1.|
00000030  66 53 66 51 06 57 8e dd  8e c5 52 be 00 7c bf 00  |fSfQ.W....R..|..|
00000040  06 b9 00 01 f3 a5 ea 4b  06 00 00 52 b4 41 bb aa  |.......K...R.A..|
00000050  55 31 c9 30 f6 f9 cd 13  72 16 81 fb 55 aa 75 10  |U1.0....r...U.u.|
00000060  83 e1 01 74 0b 66 c7 06  f1 06 b4 42 eb 15 eb 00  |...t.f.....B....|
00000070  5a 51 b4 08 cd 13 83 e1  3f 5b 51 0f b6 c6 40 50  |ZQ......?[Q...@P|
00000080  f7 e1 53 52 50 bb 00 7c  b9 04 00 66 a1 b0 07 e8  |..SRP..|...f....|
00000090  44 00 0f 82 80 00 66 40  80 c7 02 e2 f2 66 81 3e  |D.....f@.....f.>|
000000a0  40 7c fb c0 78 70 75 09  fa bc ec 7b ea 44 7c 00  |@|..xpu....{.D|.|
000000b0  00 e8 83 00 69 73 6f 6c  69 6e 75 78 2e 62 69 6e  |....isolinux.bin|
000000c0  20 6d 69 73 73 69 6e 67  20 6f 72 20 63 6f 72 72  | missing or corr|
000000d0  75 70 74 2e 0d 0a 66 60  66 31 d2 66 03 06 f8 7b  |upt...f`f1.f...{|
000000e0  66 13 16 fc 7b 66 52 66  50 06 53 6a 01 6a 10 89  |f...{fRfP.Sj.j..|
000000f0  e6 66 f7 36 e8 7b c0 e4  06 88 e1 88 c5 92 f6 36  |.f.6.{.........6|
00000100  ee 7b 88 c6 08 e1 41 b8  01 02 8a 16 f2 7b cd 13  |.{....A......{..|
00000110  8d 64 10 66 61 c3 e8 1e  00 4f 70 65 72 61 74 69  |.d.fa....Operati|
00000120  6e 67 20 73 79 73 74 65  6d 20 6c 6f 61 64 20 65  |ng system load e|
00000130  72 72 6f 72 2e 0d 0a 5e  ac b4 0e 8a 3e 62 04 b3  |rror...^....>b..|
00000140  07 cd 10 3c 0a 75 f1 cd  18 f4 eb fd 00 00 00 00  |...<.u..........|
00000150  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001b0  fc 85 2c 00 00 00 00 00  e7 63 a8 40 00 00 80 00  |..,......c.@....|
000001c0  01 00 00 5a e0 f6 00 00  00 00 a0 19 2d 00 00 fe  |...Z........-...|
000001d0  ff ff ef fe ff ff 70 aa  2c 00 80 12 00 00 00 00  |......p.,.......|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


========= Devices which don't seem to have a corresponding hard drive: =========

sdc 

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/26519/mounts) leaked on lvs invocation. Parent PID 18023: bash
File descriptor 63 (pipe:[179445]) leaked on lvs invocation. Parent PID 18023: bash

ADDITIONAL INFORMATION :
=================== log of boot-repair 2017-02-16__17h27 ===================
boot-repair version : 4ppa40
boot-sav version : 4ppa40
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa40
grub-probe : erreur : impossible de trouver un périphérique GRUB pour /dev/sdb1. Vérifiez device.map..
Warning: The driver descriptor says the physical block size is 2048 bytes, but Linux says it is 512 bytes.
Warning: The driver descriptor says the physical block size is 2048 bytes, but Linux says it is 512 bytes.
boot-repair is executed in live-session (Ubuntu 16.04.1 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash --- maybe-ubiquity
ls: impossible d'accéder à '/home/usr/.config': Aucun fichier ou dossier de ce type
mount: wrong fs type, bad option, bad superblock on /dev/sda4,
missing codepage or helper program, or other error

In some cases useful info is found in syslog - try
dmesg | tail or so.
mount /dev/sda4 : Error code 32
mount -r /dev/sda4 /mnt/boot-sav/sda4
mount: wrong fs type, bad option, bad superblock on /dev/sda4,
missing codepage or helper program, or other error

In some cases useful info is found in syslog - try
dmesg | tail or so.
mount -r /dev/sda4 : Error code 32
mount: /dev/sdb2 is already mounted or /mnt/boot-sav/sdb2 busy
mount /dev/sdb2 : Error code 32
mount -r /dev/sdb2 /mnt/boot-sav/sdb2
mount: /dev/sdb2 is already mounted or /mnt/boot-sav/sdb2 busy
mount -r /dev/sdb2 : Error code 32

=================== os-prober:
/dev/sda2:Ubuntu 16.04.1 LTS (16.04):Ubuntu:linux

=================== blkid:
/dev/sda1: UUID="18df1a2f-37f3-4c46-9ac5-6315978ca91a" TYPE="ext4" PARTUUID="f9a5533d-01"
/dev/sda2: UUID="d0272111-0f27-46eb-b3c2-6c4a4dccbead" TYPE="ext4" PTTYPE="dos" PARTUUID="f9a5533d-02"
/dev/sda4: UUID="be5bd11b-3a69-43f9-bf4f-21bc4f169edd" TYPE="ext4" PARTUUID="f9a5533d-04"
/dev/loop0: TYPE="squashfs"
/dev/sda3: UUID="7d7c6a00-090f-42f0-a4bb-51d2f9c5987b" TYPE="swap" PARTUUID="f9a5533d-03"
/dev/sdb1: UUID="2016-07-19-21-27-51-00" LABEL="Ubuntu 16.04.1 LTS amd64" TYPE="iso9660" PTUUID="40a863e7" PTTYPE="dos" PARTUUID="40a863e7-01"
/dev/sdb2: SEC_TYPE="msdos" UUID="0F7B-9366" TYPE="vfat" PARTUUID="40a863e7-02"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

mount: wrong fs type, bad option, bad superblock on /dev/sda4,
missing codepage or helper program, or other error

In some cases useful info is found in syslog - try
dmesg | tail or so.
mount /dev/sda4 : Error code 32
mount -r /dev/sda4 /mnt/boot-sav/sda4
mount: wrong fs type, bad option, bad superblock on /dev/sda4,
missing codepage or helper program, or other error

In some cases useful info is found in syslog - try
dmesg | tail or so.
mount -r /dev/sda4 : Error code 32
mount: /dev/sdb2 is already mounted or /mnt/boot-sav/sdb2 busy
mount /dev/sdb2 : Error code 32
mount -r /dev/sdb2 /mnt/boot-sav/sdb2
mount: /dev/sdb2 is already mounted or /mnt/boot-sav/sdb2 busy
mount -r /dev/sdb2 : Error code 32
dd: invalid number: «0»
Warning: /var/log/boot-sav/log/2017-02-16__17h27boot-repair00/sdb/current_mbr.img could not be created. Veuillez indiquer ce message à boot.repair@gmail.com

=================== sda2/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 juil. 19  2016 grub.d
total 76
-rwxr-xr-x 1 root root  9791 juin  17  2016 00_header
-rwxr-xr-x 1 root root  6258 mars  15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12261 juin  17  2016 10_linux
-rwxr-xr-x 1 root root 11082 juin  17  2016 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 juin  17  2016 30_os-prober
-rwxr-xr-x 1 root root  1418 juin  17  2016 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juin  17  2016 40_custom
-rwxr-xr-x 1 root root   216 juin  17  2016 41_custom
-rw-r--r-- 1 root root   483 juin  17  2016 README




=================== sda2/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda1.
sda2	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda2.
sda4	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda4.
sdb2	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sdb2.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	has-os,	2048 sectors * 512 bytes
sdb	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	usb-disk,	no-os,	0 sectors * 512 bytes


=================== parted -l:

Model: ATA WDC WD3200AAJS-2 (scsi)
Disk /dev/sda: 320GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:

Number  Start   End     Size    Type     File system     Flags
4      1049kB  22.0GB  22.0GB  primary  ext4
3      22.0GB  30.0GB  8000MB  primary  linux-swap(v1)
2      30.0GB  100GB   70.0GB  primary  ext4            boot
1      100GB   320GB   220GB   primary  ext4


Model:   (scsi)
Disk /dev/sdb: 2107MB
Sector size (logical/physical): 512B/512B
Partition Table: unknown
Disk Flags:

=================== parted -lm:

BYT;
/dev/sda:320GB:scsi:512:512:msdos:ATA WDC WD3200AAJS-2:;
4:1049kB:22.0GB:22.0GB:ext4::;
3:22.0GB:30.0GB:8000MB:linux-swap(v1)::;
2:30.0GB:100GB:70.0GB:ext4::boot;
1:100GB:320GB:220GB:ext4::;

BYT;
/dev/sdb:2107MB:scsi:512:512:unknown: :;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
sda   disk          298,1G
sda1  part ext4       205G
sda2  part ext4      65,2G
sda3  part swap       7,5G
sda4  part ext4      20,5G
sdb   disk iso9660      2G Ubuntu 16.04.1 LTS amd64
sdb1  part iso9660    1,4G Ubuntu 16.04.1 LTS amd64
sdb2  part vfat       2,3M Ubuntu 16.04.1 LTS amd64
sr0   rom            1024M
loop0 loop squashfs   1,4G

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /mnt/boot-sav/sda1
sda2     1  0  0         /mnt/boot-sav/sda2
sda3     1  0  0         [SWAP]
sda4     1  0  0
sdb      1  0  1 running /cdrom
sdb1     1  0  1
sdb2     1  0  1
sr0      1  0  1 running
loop0    1  1  0         /rofs


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1395972k,nr_inodes=348993,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=282124k,mode=755)
/dev/sdb on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=25,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=282124k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw,relatime,data=ordered)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw,relatime,data=ordered)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda3 sda4 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 sdb2 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fb1 fd full fuse fw0 hidraw0 hidraw1 hidraw2 hpet hugepages hwrng i2c-0 i2c-1 i2c-10 i2c-11 i2c-12 i2c-13 i2c-14 i2c-15 i2c-16 i2c-17 i2c-18 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 initctl input kmsg kvm lightnvm log mapper mcelog mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sdb sdb1 sdb2 sdc sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sdb2
00000000  eb 3c 90 6d 6b 66 73 2e  66 61 74 00 02 04 01 00  |.<.mkfs.fat.....|
00000010  02 00 02 80 12 f8 04 00  20 00 40 00 00 00 00 00  |........ .@.....|
00000020  00 00 00 00 80 00 29 66  93 7b 0f 4e 4f 20 4e 41  |......)f.{.NO NA|
00000030  4d 45 20 20 20 20 46 41  54 31 32 20 20 20 0e 1f  |ME    FAT12   ..|
00000040  be 5b 7c ac 22 c0 74 0b  56 b4 0e bb 07 00 cd 10  |.[|.".t.V.......|
00000050  5e eb f0 32 e4 cd 16 cd  19 eb fe 54 68 69 73 20  |^..2.......This |
00000060  69 73 20 6e 6f 74 20 61  20 62 6f 6f 74 61 62 6c  |is not a bootabl|
00000070  65 20 64 69 73 6b 2e 20  20 50 6c 65 61 73 65 20  |e disk.  Please |
00000080  69 6e 73 65 72 74 20 61  20 62 6f 6f 74 61 62 6c  |insert a bootabl|
00000090  65 20 66 6c 6f 70 70 79  20 61 6e 64 0d 0a 70 72  |e floppy and..pr|
000000a0  65 73 73 20 61 6e 79 20  6b 65 79 20 74 6f 20 74  |ess any key to t|
000000b0  72 79 20 61 67 61 69 6e  20 2e 2e 2e 20 0d 0a 00  |ry again ... ...|
000000c0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.4G     0  1.4G   0% /dev
tmpfs          tmpfs     276M  8.3M  268M   4% /run
/dev/sdb       iso9660   1.5G  1.5G     0 100% /cdrom
/dev/loop0     squashfs  1.4G  1.4G     0 100% /rofs
/cow           overlay   1.4G  104M  1.3G   8% /
tmpfs          tmpfs     1.4G  340K  1.4G   1% /dev/shm
tmpfs          tmpfs     5.0M  8.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.4G     0  1.4G   0% /sys/fs/cgroup
tmpfs          tmpfs     1.4G  1.3M  1.4G   1% /tmp
tmpfs          tmpfs     276M   84K  276M   1% /run/user/999
/dev/sda1      ext4      202G   60M  192G   1% /mnt/boot-sav/sda1
/dev/sda2      ext4       65G  4.0G   57G   7% /mnt/boot-sav/sda2

=================== fdisk -l:
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/loop0: 1.4 GiB, 1459982336 bytes, 2851528 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 298.1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xf9a5533d

Device     Boot     Start       End   Sectors  Size Id Type
/dev/sda1       195311616 625141759 429830144  205G 83 Linux
/dev/sda2  *     58593280 195311615 136718336 65.2G 83 Linux
/dev/sda3        42969088  58593279  15624192  7.5G 82 Linux swap / Solaris
/dev/sda4            2048  42969087  42967040 20.5G 83 Linux

Partition table entries are not in disk order.




Disk /dev/sdb: 2 GiB, 2106834944 bytes, 4114912 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x40a863e7

Device     Boot   Start     End Sectors  Size Id Type
/dev/sdb1  *          0 2955679 2955680  1.4G  0 Empty
/dev/sdb2       2927216 2931951    4736  2.3M ef EFI (FAT-12/16/32)


Gtk-Message: GtkDialog mapped without a transient parent. This is discouraged.


=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to) and reinstall the grub2 of sda2 into the MBRs of all disks (except USB without OS).
Additional repair would be performed: unhide-bootmenu-10s repair-filesystems


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (320GB) !


=================== User settings
The settings chosen by the user will not act on the boot.




paste.ubuntu.com ko (), using paste.debian
paste.debian.net ko (), using paste2

Essaie de faire cette procédure pour nous fournir les données SMART de ton disque dur : https://forum.ubuntu-fr.org/viewtopic.php?id=1988280

Dernière modification par malbo (Le 16/02/2017, à 19:11)

Hors ligne

#3 Le 16/02/2017, à 19:28

fprotais

Re : Problème de démarrage après installation.

Voila le résultat :

smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-31-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Blue Serial ATA
Device Model:     WDC WD3200AAJS-22B4A0
Serial Number:    WD-WCAT13893203
LU WWN Device Id: 5 0014ee 1569a31eb
Firmware Version: 01.03A01
User Capacity:    320 072 933 376 bytes [320 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.5, 3.0 Gb/s
Local Time is:    Thu Feb 16 18:22:54 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84)	Offline data collection activity
					was suspended by an interrupting command from host.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 6180) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  75) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x303f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       199
  3 Spin_Up_Time            0x0027   167   156   021    Pre-fail  Always       -       2616
  4 Start_Stop_Count        0x0032   096   096   000    Old_age   Always       -       4238
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   195   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   077   077   000    Old_age   Always       -       16978
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   096   096   000    Old_age   Always       -       4209
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       370
193 Load_Cycle_Count        0x0032   199   199   000    Old_age   Always       -       4238
194 Temperature_Celsius     0x0022   099   082   000    Old_age   Always       -       44
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   175   175   000    Old_age   Always       -       1304
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       3
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       2
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Hors ligne

#4 Le 16/02/2017, à 20:37

malbo

Re : Problème de démarrage après installation.

Cette ligne indique que ce disque est défectueux :

197 Current_Pending_Sector  0x0032   175   175   000    Old_age   Always       -       1304

Je te recommande de le remplacer.

Hors ligne

#5 Le 16/02/2017, à 21:01

fprotais

Re : Problème de démarrage après installation.

Merci pour la réponse rapide !

Hors ligne