#1 Le 20/02/2017, à 14:05
- Machtheld
Plantage du gestionnaire de fichiers
Bonjour à tous, je viens demander votre aide pour un petit problème que je n'arrive pas à résoudre.
Voilà les symptômes: il arrive régulièrement que mon dossier uilisateur, sans raison apparente, refuse subitement de s'ouvrir. La fenêtre du gestionnaire de fichiers (Thunar) est vide, mouline à l'infini, et affiche "chargement du dossier". Les tentatives pour ouvrir ce dossier en ligne de commande et/ou avec un autre gestionnaire de fenêtres (PcmanFM) donnent le même résultat.
Seule solution, redémarrer la bécane...mais dans ce cas il est impossible de le faire proprement, je me retrouve sur un écran noir avec "nom de l'ordi login" et un curseur clignotant...qui ne répond à rien bien sûr. Seule solution, appuyer sur le bouton d'alimentation.
Comme il n'y a pas de message d'erreur, impossible d'imaginer l'origine du problème.
Par ailleurs, je suis en train de faire une sauvegarde de mon disque dur externe (plusieurs centaines de Go), et le gestionnaire de fenêtres freeze régulièrement, là encore sans le moindre message d'erreur (impossible d'ouvrir un terminal pour au moins démonter le disque proprement et redémarrer...). Quelqu'un aurait-il une piste?
Merci!
Dernière modification par Machtheld (Le 20/02/2017, à 15:32)
Hors ligne
#2 Le 20/02/2017, à 16:15
- erresse
Re : Plantage du gestionnaire de fichiers
Bonjour,
Une piste, non, pas vraiment, mais un gros doute : ton problème ressemble à un disque dur en train d'expirer...
Puisque tu en as entrepris la sauvegarde, met le paquet d'abord là-dessus pour mettre tes précieux octets à l'abri si possible !
Plus de 50 ans d'informatique, ça en fait des lignes de commandes en console, mais on n'avait pas le choix...
Excellente raison pour, aujourd'hui qu'on le peut, utiliser au maximum les INTERFACES GRAPHIQUES !
Important : Une fois résolu, pensez à clore votre sujet en ajoutant [Résolu] devant le titre du 1er message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.
Hors ligne
#3 Le 21/02/2017, à 22:18
- Machtheld
Re : Plantage du gestionnaire de fichiers
Salut Erresse,
Excuse-moi pour ma réponse tardive: j'ai vérifé mon disque externe avec fsck. Il y avait effectvement des erreurs qui ont été corrigées.
Puis j'ai voulu faire aussi un fsck sur le disque dur de l'ordi, après avoir sauvegardé les données...donc je viens d'essayer de démarrer en session live, pour découvrir qu'il y a un sérieux blocage.
J'ai essayé avec plusieurs images iso différentes (clé USB créée en ligne de commande), deux clefs, un CD, et Plop manager auquel habituellement rien ne résiste...et IMPOSSIBLE de booter sur l'image *.iso. Bien sûr, j'ai vérifié l'ordre de boot dans le BIOS.
Donc là je commence à me demander s'il n'y a pas un problème matériel quelque part (c'est un Thinkpad X200 avec une demi-douzaine de ports USB, que j'ai tous essayés). En attendant je sèche encore...
Edit: j'ai trouvé un petit quelque chose au moyen de la commande dmesg:
ata4: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozenLe retour complet de la commande:
[ 1.700018] tsc: Refined TSC clocksource calibration: 2260.999 MHz
[ 1.744015] usb 1-5: new high-speed USB device number 3 using ehci-pci
[ 1.876355] usb 1-5: New USB device found, idVendor=17ef, idProduct=1005
[ 1.876358] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.876660] hub 1-5:1.0: USB hub found
[ 1.876728] hub 1-5:1.0: 4 ports detected
[ 2.012024] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.015318] ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 2.015471] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.015852] ata4.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 2.015856] ata4.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.018464] ata4.00: ATAPI: HL-DT-ST DVDRAM GU40N, QX20, max UDMA/133
[ 2.022637] ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 2.022851] ata4.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 2.022854] ata4.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.025461] ata4.00: configured for UDMA/133
[ 2.027135] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GU40N QX20 PQ: 0 ANSI: 5
[ 2.036155] sd 2:0:0:0: [sda] 246162672 512-byte logical blocks: (126 GB/117 GiB)
[ 2.036244] sd 2:0:0:0: [sda] Write Protect is off
[ 2.036248] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.036271] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.036678] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input2
[ 2.038074] sr0: scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.038076] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.038263] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.038823] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.038874] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 2.069275] sda: sda1 sda2 < sda5 sda6 >
[ 2.069820] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.116022] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 2.146808] PM: Starting manual resume from disk
[ 2.146813] PM: Hibernation image partition 8:5 present
[ 2.146815] PM: Looking for hibernation image.
[ 2.147311] PM: Image not found (code -22)
[ 2.147314] PM: Hibernation image not present or could not be loaded.
[ 2.287706] usb 3-2: New USB device found, idVendor=0a5c, idProduct=2145
[ 2.287710] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.287712] usb 3-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
[ 2.287714] usb 3-2: Manufacturer: Lenovo Computer Corp
[ 2.442945] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.623614] random: systemd: uninitialized urandom read (16 bytes read, 58 bits of entropy available)
[ 2.624563] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 2.624706] systemd[1]: Detected architecture 'x86'.
[ 2.676708] systemd[1]: Inserted module 'autofs4'
[ 2.680550] systemd[1]: Set hostname to <debian>.
[ 2.680575] random: systemd: uninitialized urandom read (16 bytes read, 60 bits of entropy available)
[ 2.680584] systemd[1]: Initializing machine ID from random generator.
[ 2.680625] systemd[1]: Installed transient /etc/machine-id file.
[ 2.700064] Switched to clocksource tsc
[ 2.708579] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 62 bits of entropy available)
[ 2.789379] random: systemd: uninitialized urandom read (16 bytes read, 68 bits of entropy available)
[ 2.789618] random: systemd: uninitialized urandom read (16 bytes read, 68 bits of entropy available)
[ 2.789825] random: systemd: uninitialized urandom read (16 bytes read, 68 bits of entropy available)
[ 2.793430] random: systemd: uninitialized urandom read (16 bytes read, 68 bits of entropy available)
[ 2.793552] random: systemd: uninitialized urandom read (16 bytes read, 68 bits of entropy available)
[ 2.793594] random: systemd: uninitialized urandom read (16 bytes read, 68 bits of entropy available)
[ 2.824680] systemd[1]: [/lib/systemd/system/mpd.service:17] Unknown lvalue 'ControlGroup' in section 'Service'
[ 2.824694] systemd[1]: [/lib/systemd/system/mpd.service:20] Unknown lvalue 'ControlGroupAttribute' in section 'Service'
[ 2.850812] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 2.850885] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.850898] systemd[1]: Starting Remote File Systems (Pre).
[ 2.850926] systemd[1]: Reached target Remote File Systems (Pre).
[ 2.850941] systemd[1]: Starting Encrypted Volumes.
[ 2.850953] systemd[1]: Reached target Encrypted Volumes.
[ 2.850975] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 2.851058] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.851075] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 2.851109] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.851121] systemd[1]: Expecting device dev-disk-by\x2duuid-157ac7f8\x2dff77\x2d4549\x2da5fa\x2df9a3df4d851a.device...
[ 2.851134] systemd[1]: Expecting device dev-disk-by\x2duuid-209159ea\x2d446a\x2d4cbb\x2d90d0\x2dd98faa63b5c0.device...
[ 2.851145] systemd[1]: Starting Root Slice.
[ 2.851170] systemd[1]: Created slice Root Slice.
[ 2.851181] systemd[1]: Starting User and Session Slice.
[ 2.851222] systemd[1]: Created slice User and Session Slice.
[ 2.851234] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 2.851269] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.851280] systemd[1]: Starting Delayed Shutdown Socket.
[ 2.851308] systemd[1]: Listening on Delayed Shutdown Socket.
[ 2.851319] systemd[1]: Starting Journal Socket (/dev/log).
[ 2.851349] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.851364] systemd[1]: Starting udev Control Socket.
[ 2.851388] systemd[1]: Listening on udev Control Socket.
[ 2.851401] systemd[1]: Starting udev Kernel Socket.
[ 2.851423] systemd[1]: Listening on udev Kernel Socket.
[ 2.851436] systemd[1]: Starting Journal Socket.
[ 2.851468] systemd[1]: Listening on Journal Socket.
[ 2.851487] systemd[1]: Starting System Slice.
[ 2.851524] systemd[1]: Created slice System Slice.
[ 2.851542] systemd[1]: Started File System Check on Root Device.
[ 2.851551] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 2.851599] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.851612] systemd[1]: Starting system-getty.slice.
[ 2.851655] systemd[1]: Created slice system-getty.slice.
[ 2.851680] systemd[1]: Starting Increase datagram queue length...
[ 2.852111] systemd[1]: Mounting Huge Pages File System...
[ 2.854689] systemd[1]: Starting Load Kernel Modules...
[ 2.855101] systemd[1]: Starting udev Coldplug all Devices...
[ 2.858846] systemd[1]: Started Set Up Additional Binary Formats.
[ 2.858869] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.859280] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 2.859745] systemd[1]: Mounting Debug File System...
[ 2.860134] systemd[1]: Starting LSB: Set keymap...
[ 2.860605] systemd[1]: Starting Slices.
[ 2.860620] systemd[1]: Reached target Slices.
[ 2.871722] systemd[1]: Started LSB: Set keymap.
[ 2.877743] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 2.877923] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 2.879461] systemd[1]: Mounted Debug File System.
[ 2.879496] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.879703] systemd[1]: Started Increase datagram queue length.
[ 2.880204] systemd[1]: Mounted Huge Pages File System.
[ 2.880350] systemd[1]: Starting Syslog Socket.
[ 2.880393] systemd[1]: Listening on Syslog Socket.
[ 2.880413] systemd[1]: Starting Journal Service...
[ 2.880973] systemd[1]: Started Journal Service.
[ 2.900295] lp: driver loaded but no devices found
[ 2.902076] ppdev: user-space parallel port driver
[ 2.911484] fuse init (API version 7.23)
[ 2.972193] systemd-udevd[182]: starting version 215
[ 3.131835] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 3.146323] mei_me 0000:00:03.0: irq 45 for MSI/MSI-X
[ 3.147329] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 3.151113] ACPI: Lid Switch [LID]
[ 3.151209] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 3.151214] ACPI: Sleep Button [SLPB]
[ 3.151316] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 3.151319] ACPI: Power Button [PWRF]
[ 3.152068] Monitor-Mwait will be used to enter C-1 state
[ 3.152073] Monitor-Mwait will be used to enter C-2 state
[ 3.152077] Monitor-Mwait will be used to enter C-3 state
[ 3.152081] tsc: Marking TSC unstable due to TSC halts in idle
[ 3.152091] ACPI: acpi_idle registered with cpuidle
[ 3.160184] Switched to clocksource hpet
[ 3.160574] [drm] Initialized drm 1.1.0 20060810
[ 3.164842] ACPI: AC Adapter [AC] (on-line)
[ 3.173411] tpm_tis 00:05: 1.2 TPM (device-id 0x1020, rev-id 6)
[ 3.173415] tpm_tis 00:05: Intel iTPM workaround enabled
[ 3.183723] wmi: Mapper loaded
[ 3.184693] ACPI: Battery Slot [BAT0] (battery present)
[ 3.190341] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.190594] Non-volatile memory driver v1.3
[ 3.228704] [drm] Memory usable by graphics device = 2048M
[ 3.228708] [drm] Replacing VGA console driver
[ 3.229215] Console: switching to colour dummy device 80x25
[ 3.229875] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 3.229878] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 3.229880] thinkpad_acpi: ThinkPad BIOS 6DET28WW (1.05 ), EC 7XHT21WW-1.03
[ 3.229881] thinkpad_acpi: Lenovo ThinkPad X200, model 7459W2P
[ 3.250795] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[ 3.250956] thinkpad_acpi: radio switch found; radios are enabled
[ 3.251040] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 3.251042] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 3.254339] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 3.256948] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 3.257569] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 3.259076] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 3.264058] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 3.264070] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.264071] [drm] Driver supports precise vblank timestamp query.
[ 3.264148] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.288695] Bluetooth: Core ver 2.19
[ 3.288715] NET: Registered protocol family 31
[ 3.288717] Bluetooth: HCI device and connection manager initialized
[ 3.288725] Bluetooth: HCI socket layer initialized
[ 3.288729] Bluetooth: L2CAP socket layer initialized
[ 3.288739] Bluetooth: SCO socket layer initialized
[ 3.295582] cfg80211: Calling CRDA to update world regulatory domain
[ 3.307234] usbcore: registered new interface driver btusb
[ 3.318347] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 3.325984] ath5k 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.326091] ath5k 0000:03:00.0: registered as 'phy0'
[ 3.348027] tpm_tis 00:05: TPM is disabled/deactivated (0x6)
[ 3.399843] kvm: disabled by bios
[ 3.496031] random: nonblocking pool is initialized
[ 3.499904] Adding 4045820k swap on /dev/sda5. Priority:-1 extents:1 across:4045820k SSFS
[ 3.527823] cfg80211: World regulatory domain updated:
[ 3.527827] cfg80211: DFS Master region: unset
[ 3.527829] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3.527832] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.527834] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 3.527837] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.527839] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 3.527841] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 3.527844] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 3.527846] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.527848] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 3.602303] fbcon: inteldrmfb (fb0) is primary device
[ 3.610239] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 3.624080] usb 3-2: USB disconnect, device number 2
[ 3.633751] systemd-journald[169]: Received request to flush runtime journal from PID 1
[ 3.927072] ath: EEPROM regdomain: 0x67
[ 3.927073] ath: EEPROM indicates we should expect a direct regpair map
[ 3.927075] ath: Country alpha2 being used: 00
[ 3.927076] ath: Regpair used: 0x67
[ 3.933485] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 3.933797] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 4.112197] Console: switching to colour frame buffer device 160x50
[ 4.116459] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.116461] i915 0000:00:02.0: registered panic notifier
[ 4.132715] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 4.135974] acpi device:01: registered as cooling_device2
[ 4.136450] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 4.139290] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.139913] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 4.140561] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB_.PCI0.LPC_.PMIO) (20140424/utaddress-254)
[ 4.140568] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.140572] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB_.PCI0.LPC_.LPIO) (20140424/utaddress-254)
[ 4.140576] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.140578] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB_.PCI0.LPC_.LPIO) (20140424/utaddress-254)
[ 4.140581] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.140583] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.140965] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 4.153326] iTCO_vendor_support: vendor-support=0
[ 4.154091] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.154138] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
[ 4.154272] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.160314] sound hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[ 4.160738] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[ 4.160741] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.160743] sound hdaudioC0D0: hp_outs=2 (0x19/0x16/0x0/0x0/0x0)
[ 4.160745] sound hdaudioC0D0: mono: mono_out=0x0
[ 4.160748] sound hdaudioC0D0: dig-out=0x1c/0x0
[ 4.160749] sound hdaudioC0D0: inputs:
[ 4.160752] sound hdaudioC0D0: Mic=0x18
[ 4.160754] sound hdaudioC0D0: Internal Mic=0x1d
[ 4.160756] sound hdaudioC0D0: Dock Mic=0x17
[ 4.161738] sound hdaudioC0D0: Enable sync_write for stable communication
[ 4.166428] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input9
[ 4.168824] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.169572] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.169760] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.169934] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 4.207848] RPC: Registered named UNIX socket transport module.
[ 4.207852] RPC: Registered udp transport module.
[ 4.207854] RPC: Registered tcp transport module.
[ 4.207855] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.211723] FS-Cache: Loaded
[ 4.224907] FS-Cache: Netfs 'nfs' registered for caching
[ 4.304884] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 5.103586] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.103590] Bluetooth: BNEP filters: protocol multicast
[ 5.103599] Bluetooth: BNEP socket layer initialized
[ 5.919259] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.680206] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 6.784067] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 6.784190] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.060027] usb 1-5.3: new high-speed USB device number 4 using ehci-pci
[ 7.152995] usb 1-5.3: New USB device found, idVendor=13fd, idProduct=0842
[ 7.152999] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.153002] usb 1-5.3: Product: USB Mass Storage Device
[ 7.153004] usb 1-5.3: Manufacturer: TSSTcorp
[ 7.153006] usb 1-5.3: SerialNumber: SATASLIM00001006f70
[ 7.174373] usb-storage 1-5.3:1.0: USB Mass Storage device detected
[ 7.199701] scsi6 : usb-storage 1-5.3:1.0
[ 7.199856] usbcore: registered new interface driver usb-storage
[ 7.788142] wlan0: authenticate with 00:17:33:42:27:18
[ 7.792256] wlan0: send auth to 00:17:33:42:27:18 (try 1/3)
[ 7.793700] wlan0: authenticated
[ 7.796052] wlan0: associate with 00:17:33:42:27:18 (try 1/3)
[ 7.798983] wlan0: RX AssocResp from 00:17:33:42:27:18 (capab=0x411 status=0 aid=2)
[ 7.799080] wlan0: associated
[ 7.799111] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 8.204437] scsi 6:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TS00 PQ: 0 ANSI: 0
[ 8.313295] sr1: scsi3-mmc drive: 8x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 8.313693] sr 6:0:0:0: Attached scsi CD-ROM sr1
[ 8.313944] sr 6:0:0:0: Attached scsi generic sg2 type 5
[ 26.992516] Key type dns_resolver registered
[ 26.999896] NFS: Registering the id_resolver key type
[ 26.999909] Key type id_resolver registered
[ 26.999910] Key type id_legacy registered
[ 37.525807] usb 1-5.3: USB disconnect, device number 4
[ 37.527292] cdrom: issuing MRW background format suspend
[ 77.407428] ata4: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
[ 77.407439] ata4: irq_stat 0x00400040, connection status changed
[ 77.407446] ata4: SError: { PHYRdyChg DevExch }
[ 77.407457] ata4: hard resetting link
[ 77.512131] usb 1-5: USB disconnect, device number 3
[ 78.069363] Monitor-Mwait will be used to enter C-3 state
[ 78.070680] thinkpad_acpi: EC reports that Thermal Table has changed
[ 78.128041] ata4: SATA link down (SStatus 0 SControl 300)
[ 80.974012] thinkpad_acpi: EC reports that Thermal Table has changed
[ 83.128094] ata4: hard resetting link
[ 83.448049] ata4: SATA link down (SStatus 0 SControl 300)
[ 83.448060] ata4: limiting SATA link speed to 1.5 Gbps
[ 88.448042] ata4: hard resetting link
[ 88.768102] ata4: SATA link down (SStatus 0 SControl 310)
[ 88.768110] ata4.00: disabled
[ 88.768123] ata4: EH complete
[ 88.768133] sr 3:0:0:0: rejecting I/O to offline device
[ 88.768137] sr 3:0:0:0: killing request
[ 88.768153] ACPI: \_SB_.GDCK: undocking
[ 88.768161] sr 3:0:0:0: rejecting I/O to offline device
[ 88.768205] sr 3:0:0:0: rejecting I/O to offline device
[ 88.776586] ata4.00: detaching (SCSI 3:0:0:0)
[ 88.980540] ACPI: \_SB_.PCI0.SATA.PRT1: docking
[ 88.980628] ACPI: \_SB_.PCI0.SATA.PRT1: Unable to dock!
[ 679.166367] perf interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 50000Dernière modification par Machtheld (Le 21/02/2017, à 22:31)
Hors ligne
#4 Le 21/02/2017, à 22:22
- smokeh
Re : Plantage du gestionnaire de fichiers
erresse a écrit :
ton problème ressemble à un disque dur en train d'expirer...
C'est peut être ça ... vérifie avec smartctl
Hors ligne
#5 Le 21/02/2017, à 22:35
- Machtheld
Re : Plantage du gestionnaire de fichiers
Je l'avais fait, Smart est activé sur le disque, et ne signale rien de spécial.
Hors ligne
#6 Le 21/02/2017, à 22:37
- smokeh
Re : Plantage du gestionnaire de fichiers
Machtheld a écrit :
Je l'avais fait, Smart est activé sur le disque, et ne signale rien de spécial.
montre le rapport alors...
Hors ligne
#7 Le 21/02/2017, à 22:42
- Machtheld
Re : Plantage du gestionnaire de fichiers
Voilà 
(j'ai pensé que le test court suffirait dans un premier temps)
smartctl 6.4 2014-10-07 r4002 [i686-linux-3.16.0-4-686-pae] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SanDisk based SSDs
Device Model: SanDisk SDSSDP128G
Serial Number: 151851402075
LU WWN Device Id: 5 001b44 e66a17f5b
Firmware Version: 3.2.0
User Capacity: 126,035,288,064 bytes [126 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 1.8 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Feb 21 21:41:33 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 21) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0
9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 4327
12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 5257
165 Unknown_Attribute 0x0002 100 100 000 Old_age Always - 613729
171 Program_Fail_Count 0x0002 100 100 000 Old_age Always - 0
172 Erase_Fail_Count 0x0002 100 100 000 Old_age Always - 0
173 Avg_Write_Erase_Ct 0x0002 100 100 000 Old_age Always - 157
174 Unexpect_Power_Loss_Ct 0x0002 100 100 000 Old_age Always - 277
187 Reported_Uncorrect 0x0002 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 055 045 000 Old_age Always - 45 (Min/Max 7/56)
230 Perc_Write_Erase_Count 0x0002 100 100 000 Old_age Always - 523
232 Perc_Avail_Resrvd_Space 0x0003 100 100 005 Pre-fail Always - 0
234 Perc_Write_Erase_Ct_BC 0x0002 100 100 000 Old_age Always - 271
241 Total_LBAs_Written 0x0002 100 100 000 Old_age Always - 11116541988
242 Total_LBAs_Read 0x0002 100 100 000 Old_age Always - 12150662976
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4327 -
# 2 Short offline Completed without error 00% 4318 -
# 3 Extended offline Completed without error 00% 677 -
# 4 Short offline Completed without error 00% 665 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Tiens, il n'y avait pas ça hier soir:
232 Perc_Avail_Resrvd_Space 0x0003 100 100 005 Pre-fail Always - 0Dernière modification par Machtheld (Le 21/02/2017, à 22:45)
Hors ligne
#8 Le 21/02/2017, à 23:51
- Machtheld
Re : Plantage du gestionnaire de fichiers
...et le test long:
smartctl 6.4 2014-10-07 r4002 [i686-linux-3.16.0-4-686-pae] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SanDisk based SSDs
Device Model: SanDisk SDSSDP128G
Serial Number: 151851402075
LU WWN Device Id: 5 001b44 e66a17f5b
Firmware Version: 3.2.0
User Capacity: 126,035,288,064 bytes [126 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 1.8 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Feb 21 22:40:55 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 21) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0
9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 4328
12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 5257
165 Unknown_Attribute 0x0002 100 100 000 Old_age Always - 613792
171 Program_Fail_Count 0x0002 100 100 000 Old_age Always - 0
172 Erase_Fail_Count 0x0002 100 100 000 Old_age Always - 0
173 Avg_Write_Erase_Ct 0x0002 100 100 000 Old_age Always - 157
174 Unexpect_Power_Loss_Ct 0x0002 100 100 000 Old_age Always - 277
187 Reported_Uncorrect 0x0002 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 055 045 000 Old_age Always - 45 (Min/Max 7/56)
230 Perc_Write_Erase_Count 0x0002 100 100 000 Old_age Always - 523
232 Perc_Avail_Resrvd_Space 0x0003 100 100 005 Pre-fail Always - 0
234 Perc_Write_Erase_Ct_BC 0x0002 100 100 000 Old_age Always - 271
241 Total_LBAs_Written 0x0002 100 100 000 Old_age Always - 11117219348
242 Total_LBAs_Read 0x0002 100 100 000 Old_age Always - 12151005808
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 4328 -
# 2 Short offline Completed without error 00% 4327 -
# 3 Short offline Completed without error 00% 4318 -
# 4 Extended offline Completed without error 00% 677 -
# 5 Short offline Completed without error 00% 665 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Hors ligne