Pages : 1
#1 Le 15/03/2017, à 18:16
- Mediaclic
Instal 12.04 LTS sur MSI WT72
Salut à toutes et à tous,
J'ai un problème durant l'instal de la 12.04LTS sur un MSI WT72.
Il me demande à chaque fois de lui donné un chemin pour le secteur d'amorçage.
Il me le fait sur la 16.04 également.
Besoin d'un peu d'aide svp.
Voici le boot info :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Nov2014]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 1288976 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 1,886,523,391 1,886,521,344 83 Linux
/dev/sda2 1,886,525,438 1,953,523,711 66,998,274 5 Extended
/dev/sda5 1,886,525,440 1,953,523,711 66,998,272 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 8019 MB, 8019509248 bytes
255 heads, 63 sectors/track, 974 cylinders, total 15663104 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,264 15,663,103 15,660,840 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/nvme0n1p1 9df14e1e-a56b-405f-b2b0-dd0e397a0f09 ext4
/dev/nvme0n1p5 4b2cb214-4339-4c94-b0aa-5b58eed8fa94 ext4
/dev/nvme1n1p1 d844778f-0080-4f82-9e03-44975e05e69b ext4
/dev/nvme1n1p5 2d9a2b28-179d-4216-aa43-9d223a53a1b4 swap
/dev/sda1 674acb09-a54c-4ca8-b5fd-6ff7f9b62193 ext4
/dev/sda5 07151132-d678-4826-be12-7d0270a75de6 swap
/dev/sdb1 8C37-FE60 vfat MYLINUXLIVE
/dev/zram0 0f656d4f-c9cb-45de-bbfb-2f1096aa0fd4 swap
/dev/zram1 0249720e-ea29-4f53-b897-11d4b594fccc swap
/dev/zram2 ff7287b5-0c81-4fd5-b888-bdbb6dac0d11 swap
/dev/zram3 1efe723d-52ae-43fc-8143-b3d9c3d4050e swap
/dev/zram4 2a68d74d-e5db-4467-9102-f91118d85f27 swap
/dev/zram5 85f02249-c57e-4a84-b92c-e6d426606934 swap
/dev/zram6 40e018f2-0d17-4e85-bedf-fb626a4172b7 swap
/dev/zram7 849f24ac-4e82-45ed-acef-bccb35c55e56 swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Mar 15 15:57 ata-HGST_HTS721010A9E630_JS100Y620J87YW -> ../../sda
lrwxrwxrwx 1 root root 10 Mar 15 15:57 ata-HGST_HTS721010A9E630_JS100Y620J87YW-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Mar 15 15:57 ata-HGST_HTS721010A9E630_JS100Y620J87YW-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Mar 15 15:57 ata-HGST_HTS721010A9E630_JS100Y620J87YW-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 Mar 15 15:57 ata-HL-DT-ST_BD-RE_BU20N_M65F4GB5450 -> ../../sr0
lrwxrwxrwx 1 root root 9 Mar 15 15:57 usb-USB_Flash_Disk_FBH1206122300597-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Mar 15 15:57 usb-USB_Flash_Disk_FBH1206122300597-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Mar 15 15:57 wwn-0x5000cca836c764ee -> ../../sda
lrwxrwxrwx 1 root root 10 Mar 15 15:57 wwn-0x5000cca836c764ee-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Mar 15 15:57 wwn-0x5000cca836c764ee-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Mar 15 15:57 wwn-0x5000cca836c764ee-part5 -> ../../sda5
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 674acb09-a54c-4ca8-b5fd-6ff7f9b62193
else
search --no-floppy --fs-uuid --set=root 674acb09-a54c-4ca8-b5fd-6ff7f9b62193
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-674acb09-a54c-4ca8-b5fd-6ff7f9b62193' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 674acb09-a54c-4ca8-b5fd-6ff7f9b62193
else
search --no-floppy --fs-uuid --set=root 674acb09-a54c-4ca8-b5fd-6ff7f9b62193
fi
linux /boot/vmlinuz-4.4.0-21-generic root=UUID=674acb09-a54c-4ca8-b5fd-6ff7f9b62193 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-21-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-674acb09-a54c-4ca8-b5fd-6ff7f9b62193' {
menuentry 'Ubuntu, avec Linux 4.4.0-21-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-advanced-674acb09-a54c-4ca8-b5fd-6ff7f9b62193' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 674acb09-a54c-4ca8-b5fd-6ff7f9b62193
else
search --no-floppy --fs-uuid --set=root 674acb09-a54c-4ca8-b5fd-6ff7f9b62193
fi
echo 'Chargement de Linux 4.4.0-21-generic…'
linux /boot/vmlinuz-4.4.0-21-generic root=UUID=674acb09-a54c-4ca8-b5fd-6ff7f9b62193 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-21-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-21-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-init-upstart-674acb09-a54c-4ca8-b5fd-6ff7f9b62193' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 674acb09-a54c-4ca8-b5fd-6ff7f9b62193
else
search --no-floppy --fs-uuid --set=root 674acb09-a54c-4ca8-b5fd-6ff7f9b62193
fi
echo 'Chargement de Linux 4.4.0-21-generic…'
linux /boot/vmlinuz-4.4.0-21-generic root=UUID=674acb09-a54c-4ca8-b5fd-6ff7f9b62193 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-21-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-recovery-674acb09-a54c-4ca8-b5fd-6ff7f9b62193' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 674acb09-a54c-4ca8-b5fd-6ff7f9b62193
else
search --no-floppy --fs-uuid --set=root 674acb09-a54c-4ca8-b5fd-6ff7f9b62193
fi
echo 'Chargement de Linux 4.4.0-21-generic…'
linux /boot/vmlinuz-4.4.0-21-generic root=UUID=674acb09-a54c-4ca8-b5fd-6ff7f9b62193 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-21-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 674acb09-a54c-4ca8-b5fd-6ff7f9b62193
else
search --no-floppy --fs-uuid --set=root 674acb09-a54c-4ca8-b5fd-6ff7f9b62193
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 674acb09-a54c-4ca8-b5fd-6ff7f9b62193
else
search --no-floppy --fs-uuid --set=root 674acb09-a54c-4ca8-b5fd-6ff7f9b62193
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=674acb09-a54c-4ca8-b5fd-6ff7f9b62193 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=07151132-d678-4826-be12-7d0270a75de6 none swap sw 0 0
--------------------------------------------------------------------------------
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Boot-Repair-Disk session" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 300
ui gfxboot bootlogo
--------------------------------------------------------------------------------
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
cat: write error: Broken pipe
File descriptor 9 (/proc/2125/mounts) leaked on lvs invocation. Parent PID 12941: bash
File descriptor 63 (pipe:[30785]) leaked on lvs invocation. Parent PID 12941: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2017-03-15__15h57 ===================
boot-repair version : 4ppa14
boot-sav version : 4ppa14
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa14
File descriptor 9 (/proc/2125/mounts) leaked on lvs invocation. Parent PID 4748: /bin/sh
No volume groups found
boot-repair is executed in live-session (Boot-Repair-Disk 64bit 29nov2014, trusty, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit, 64-bit
file=/cdrom/preseed/lubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- debian-installer/language=fr keyboard-configuration/layoutcode?=fr keyboard-configuration/variantcode?=oss
=================== os-prober:
/dev/nvme0n1p1:Ubuntu 12.04.5 LTS (12.04):Ubuntu:linux
/dev/nvme1n1p1:Ubuntu 16.04.2 LTS (16.04):Ubuntu1:linux
/dev/sda1:Ubuntu 16.04 LTS (16.04):Ubuntu2:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/nvme0n1p1: UUID="9df14e1e-a56b-405f-b2b0-dd0e397a0f09" TYPE="ext4"
/dev/nvme0n1p5: UUID="4b2cb214-4339-4c94-b0aa-5b58eed8fa94" TYPE="ext4"
/dev/nvme1n1p1: UUID="d844778f-0080-4f82-9e03-44975e05e69b" TYPE="ext4"
/dev/nvme1n1p5: UUID="2d9a2b28-179d-4216-aa43-9d223a53a1b4" TYPE="swap"
/dev/sda1: UUID="674acb09-a54c-4ca8-b5fd-6ff7f9b62193" TYPE="ext4"
/dev/sda5: UUID="07151132-d678-4826-be12-7d0270a75de6" TYPE="swap"
/dev/sdb1: LABEL="MYLINUXLIVE" UUID="8C37-FE60" TYPE="vfat"
/dev/zram0: UUID="0f656d4f-c9cb-45de-bbfb-2f1096aa0fd4" TYPE="swap"
/dev/zram1: UUID="0249720e-ea29-4f53-b897-11d4b594fccc" TYPE="swap"
/dev/zram2: UUID="ff7287b5-0c81-4fd5-b888-bdbb6dac0d11" TYPE="swap"
/dev/zram3: UUID="1efe723d-52ae-43fc-8143-b3d9c3d4050e" TYPE="swap"
/dev/zram4: UUID="2a68d74d-e5db-4467-9102-f91118d85f27" TYPE="swap"
/dev/zram5: UUID="85f02249-c57e-4a84-b92c-e6d426606934" TYPE="swap"
/dev/zram6: UUID="40e018f2-0d17-4e85-bedf-fb626a4172b7" TYPE="swap"
/dev/zram7: UUID="849f24ac-4e82-45ed-acef-bccb35c55e56" TYPE="swap"
3 disks with OS, 3 OS : 3 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== nvme1n1p1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 mars 15 10:21 grub.d
total 76
-rwxr-xr-x 1 root root 9791 mars 1 21:01 00_header
-rwxr-xr-x 1 root root 6258 mars 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 mars 1 21:01 10_linux
-rwxr-xr-x 1 root root 11082 mars 1 21:01 20_linux_xen
-rwxr-xr-x 1 root root 11692 mars 1 21:01 30_os-prober
-rwxr-xr-x 1 root root 1418 mars 1 21:01 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mars 1 21:01 40_custom
-rwxr-xr-x 1 root root 216 mars 1 21:01 41_custom
-rw-r--r-- 1 root root 483 mars 1 21:01 README
=================== nvme1n1p1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sda1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 avril 20 2016 grub.d
total 76
-rwxr-xr-x 1 root root 9791 avril 15 2016 00_header
-rwxr-xr-x 1 root root 6258 mars 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12261 avril 15 2016 10_linux
-rwxr-xr-x 1 root root 11082 avril 15 2016 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 avril 15 2016 30_os-prober
-rwxr-xr-x 1 root root 1418 avril 15 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 avril 15 2016 40_custom
-rwxr-xr-x 1 root root 216 avril 15 2016 41_custom
-rw-r--r-- 1 root root 483 avril 15 2016 README
=================== sda1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
EFI in dmesg.
[ 0.000000] ACPI: UEFI 00000000373b1518 000042 (v01 00000000 00000000)
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
nvme0n1p1 : nvme0n1, not-sepboot, no-grubenv nogrub, signed , no-update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, nogrubinstall, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, /mnt/boot-sav/nvme0n1p1.
nvme0n1p5 : nvme0n1, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/nvme0n1p5.
nvme1n1p1 : nvme1n1, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, /mnt/boot-sav/nvme1n1p1.
sda1 : sda, not-sepboot, grubenv-ok grub2, signed grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1.
nvme0n1 : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
nvme1n1 : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA HGST HTS721010A9 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 966GB 966GB primary ext4 boot
2 966GB 1000GB 34.3GB extended
5 966GB 1000GB 34.3GB logical linux-swap(v1)
Model: USB Flash Disk (scsi)
Disk /dev/sdb: 8020MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1159kB 8020MB 8018MB primary fat32 boot, lba
Error: /dev/zram0: unrecognised disk label
Error: /dev/zram1: unrecognised disk label
Error: /dev/zram2: unrecognised disk label
Error: /dev/zram3: unrecognised disk label
Error: /dev/zram4: unrecognised disk label
Error: /dev/zram5: unrecognised disk label
Error: /dev/zram6: unrecognised disk label
Error: /dev/zram7: unrecognised disk label
Model: Unknown (unknown)
Disk /dev/nvme0n1: 128GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 28.0GB 28.0GB primary ext4 boot
2 28.0GB 128GB 100GB extended
5 28.0GB 128GB 100GB logical ext4
Model: Unknown (unknown)
Disk /dev/nvme1n1: 128GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 93.7GB 93.7GB primary ext4 boot
2 93.7GB 128GB 34.3GB extended
5 93.7GB 128GB 34.3GB logical linux-swap(v1)
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:msdos:ATA HGST HTS721010A9;
1:1049kB:966GB:966GB:ext4::boot;
2:966GB:1000GB:34.3GB:::;
5:966GB:1000GB:34.3GB:linux-swap(v1)::;
BYT;
/dev/sdb:8020MB:scsi:512:512:msdos:USB Flash Disk;
1:1159kB:8020MB:8018MB:fat32::boot, lba;
Error: /dev/zram0: unrecognised disk label
Error: /dev/zram1: unrecognised disk label
Error: /dev/zram2: unrecognised disk label
Error: /dev/zram3: unrecognised disk label
Error: /dev/zram4: unrecognised disk label
Error: /dev/zram5: unrecognised disk label
Error: /dev/zram6: unrecognised disk label
Error: /dev/zram7: unrecognised disk label
BYT;
/dev/nvme0n1:128GB:unknown:512:512:msdos:Unknown;
1:1049kB:28.0GB:28.0GB:ext4::boot;
2:28.0GB:128GB:100GB:::;
5:28.0GB:128GB:100GB:ext4::;
BYT;
/dev/nvme1n1:128GB:unknown:512:512:msdos:Unknown;
1:1049kB:93.7GB:93.7GB:ext4::boot;
2:93.7GB:128GB:34.3GB:::;
5:93.7GB:128GB:34.3GB:linux-swap(v1)::;
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=lubuntu)
/dev/nvme0n1p1 on /mnt/boot-sav/nvme0n1p1 type ext4 (rw)
/dev/nvme0n1p5 on /mnt/boot-sav/nvme0n1p5 type ext4 (rw)
/dev/nvme1n1p1 on /mnt/boot-sav/nvme1n1p1 type ext4 (rw)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw)
=================== ls:
/sys/block/nvme0n1 (filtered): alignment_offset bdi capability dev device discard_alignment ext_range holders inflight nvme0n1p1 nvme0n1p2 nvme0n1p5 power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/nvme1n1 (filtered): alignment_offset bdi capability dev device discard_alignment ext_range holders inflight nvme1n1p1 nvme1n1p2 nvme1n1p5 power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk ecryptfs fd full fuse hidraw0 hpet input kmsg kvm log mapper mcelog mem net network_latency network_throughput null nvme0 nvme0n1 nvme0n1p1 nvme0n1p2 nvme0n1p5 nvme1 nvme1n1 nvme1n1p1 nvme1n1p2 nvme1n1p5 port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 16G 17M 16G 1% /
udev devtmpfs 16G 12K 16G 1% /dev
tmpfs tmpfs 3.2G 1.3M 3.2G 1% /run
/dev/sdb1 vfat 7.5G 614M 6.9G 9% /cdrom
/dev/loop0 squashfs 549M 549M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 16G 8.0K 16G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 16G 0 16G 0% /run/shm
none tmpfs 100M 16K 100M 1% /run/user
/dev/nvme0n1p1 ext4 26G 2.3G 22G 10% /mnt/boot-sav/nvme0n1p1
/dev/nvme0n1p5 ext4 92G 60M 87G 1% /mnt/boot-sav/nvme0n1p5
/dev/nvme1n1p1 ext4 86G 1.2G 81G 2% /mnt/boot-sav/nvme1n1p1
/dev/sda1 ext4 886G 3.4G 837G 1% /mnt/boot-sav/sda1
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xa3c56fcf
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1886523391 943260672 83 Linux
/dev/sda2 1886525438 1953523711 33499137 5 Extended
Partition 2 does not start on physical sector boundary.
/dev/sda5 1886525440 1953523711 33499136 82 Linux swap / Solaris
Disk /dev/sdb: 8019 MB, 8019509248 bytes
255 heads, 63 sectors/track, 974 cylinders, total 15663104 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xc3072e18
Device Boot Start End Blocks Id System
/dev/sdb1 * 2264 15663103 7830420 c W95 FAT32 (LBA)
User choice: Est-ce que nvme1n1 (128GB) est un disque amovible ? no
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of nvme1n1p1 into the MBRs of all disks (except USB without OS).
The boot flag would be placed on nvme0n1p1.
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque nvme1n1 (128GB) !
=================== User settings
The settings chosen by the user will not act on the boot.
Modération : merci à l'avenir d'utiliser les balises code (explications ici).
Dernière modification par cqfd93 (Le 15/03/2017, à 18:39)
Hors ligne
#2 Le 15/03/2017, à 19:58
- lucmars
Re : Instal 12.04 LTS sur MSI WT72
User choice: Est-ce que nvme1n1 (128GB) est un disque amovible ? no
Peux-tu confirmer, as-tu 2 ssd de 128 go ou un seul
=================== os-prober:
/dev/nvme0n1p1:Ubuntu 12.04.5 LTS (12.04):Ubuntu:linux
/dev/nvme1n1p1:Ubuntu 16.04.2 LTS (16.04):Ubuntu1:linux
/dev/sda1:Ubuntu 16.04 LTS (16.04):Ubuntu2:linux
Ci-dessus on voit la 1204 sur un des ssd, mais quelle idée d'installer une version qui n'a plus de support ? Sur l'autre ssd la 1604.2 et sur le HD de 1TO la 1604, pourquoi pas mais tu immobilise ton disk de stockage
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of nvme1n1p1 into the MBRs of all disks (except USB without OS).
The boot flag would be placed on nvme0n1p1.
Additional repair would be performed: unhide-bootmenu-10s
Cela me parait bien, mais arrives-tu à booter car l'installation semble ok ?
Gaulois Matter !
Hors ligne
#3 Le 16/03/2017, à 11:23
- Mediaclic
Re : Instal 12.04 LTS sur MSI WT72
Salut, sur le pc il y a bien 2 ssd de 128Go et 1 mécanique de 1To.
Besoin de la 12.04 pour 2 logiciels : Salomé Méca 2013 et Code Aster V12.
Si vous connaissez une autre version d'Ubuntu compatible, je suis preneur.
Nous avons testé la 16.04 sur le 1To également pour testé, mais sans succès, on a le fond d'écran mais que la souris et la fenêtre des processus qui clignote...
Dernière modification par Mediaclic (Le 16/03/2017, à 11:38)
Hors ligne
#4 Le 16/03/2017, à 13:17
- lucmars
Re : Instal 12.04 LTS sur MSI WT72
Et donc la 1204 fonctionne bien mais pas la 1604 (laquelle des deux 1604.x d'ailleurs ?)
Gaulois Matter !
Hors ligne
#5 Le 16/03/2017, à 13:29
- Mediaclic
Re : Instal 12.04 LTS sur MSI WT72
Non la 12.04 ne veut pas s'installer correctement, il ne veut pas m'installer le secteur d’amorçage.
Il nous faut absolument la 12.04.
On peut installer ce secteur d’amorçage après ?
Dernière modification par Mediaclic (Le 16/03/2017, à 13:30)
Hors ligne
#6 Le 16/03/2017, à 16:05
- lucmars
Re : Instal 12.04 LTS sur MSI WT72
Je sais pas.
Je suppose que t'as tenté d'installer la 1204 sur le HD et c'est pareil.
Gaulois Matter !
Hors ligne
#7 Le 16/03/2017, à 17:26
- Mediaclic
Re : Instal 12.04 LTS sur MSI WT72
J'ai essayer sur les 3 disques est j'ai le même résultat...
J'ai installé sur le HDD sur un autre pc, remis le HDD dans le pc.
Hors ligne
#8 Le 16/03/2017, à 21:39
- lucmars
Re : Instal 12.04 LTS sur MSI WT72
Et ça marche cette fois ?
Gaulois Matter !
Hors ligne
#9 Le 17/03/2017, à 16:09
- Mediaclic
Re : Instal 12.04 LTS sur MSI WT72
Oui ça fonctionne, j'ai cloné le HD 1to sur un SSD 500Go pour le remplacé.
Maintenant il me manque les pilotes Wifi et celui de la carte réseau....
Hors ligne
#10 Le 17/03/2017, à 20:28
- lucmars
Re : Instal 12.04 LTS sur MSI WT72
Oui ça fonctionne, j'ai cloné le HD 1to sur un SSD 500Go pour le remplacé.
Maintenant il me manque les pilotes Wifi et celui de la carte réseau....
En gras, t'as bien fait de prendre un disk de 500go, car parfois, si la partition racine est trop grande, grub peut s'y perdre.
Mais bon, t'as un probleme matos (en italique) et un probleme gestion de disque, je pense que tu t'en doutes.
Comment tes disques sont gérés dans le bios ?
Gaulois Matter !
Hors ligne
Pages : 1