#1 Le 04/04/2017, à 14:36
- pusse
Aide à la détermination d'un problème de figeage / fix
Bonjour à tous,
je viens vers vous car je suis face à un problème et je ne sais pas par quel bout le prendre.
Voila, j'ai un PC Fixe tournant sur Lubuntu et j'ai depuis pas mal de temps des problème de figeage. En fait, aléatoirement, tout se bloque et je ne peux rien faire d'autre que de redémarrer.
Cela arrive plusieurs fois dans une journée ou parfois après 2/3 jours, rien n'est régulier.
L'ordi n 'est pas tout neuf donc je pencherai pour un pb de matériel mais je ne sais pas par où commencer pour trouver mon problème sachant que mes connaissance ubuntu sont un peu limitées.
Est-ce que l'un d'entre vous pourrez m'aider à déterminer mon problème ?? Me donner une piste de recherche ?
Merci d'avance à tous
Dernière modification par pusse (Le 04/04/2017, à 17:44)
Hors ligne
#2 Le 04/04/2017, à 21:19
- tarkan99
Re : Aide à la détermination d'un problème de figeage / fix
Salut !
il peut y avoir un lien entre le noyau utilisé et le processeur.
pour analyse, peux-tu donner le retour (avec les balises codes)
uname -a
lscpu
Dans logiciels et mise à jour, onglet Pilotes aditionnels, vois-tu un pilote proposé "Utilisation de Processor microcode ....." ?
Si oui alors essaie le .
Dernière modification par tarkan99 (Le 04/04/2017, à 21:22)
xubuntu 22.04.1 sur machine assemblée base de Core i5 9400
Hors ligne
#3 Le 04/04/2017, à 21:28
- foustala
Re : Aide à la détermination d'un problème de figeage / fix
ainsi que les 5 dernières minutes de du kern.log et du syslog de la précédente session. ce sont des fichiers dispo dans le repertoire /var/log
Hors ligne
#4 Le 04/04/2017, à 21:37
- tarkan99
Re : Aide à la détermination d'un problème de figeage / fix
avec
tail -30 /var/log/kern.log
tail -30 /var/log/syslog
xubuntu 22.04.1 sur machine assemblée base de Core i5 9400
Hors ligne
#5 Le 05/04/2017, à 11:04
- pusse
Re : Aide à la détermination d'un problème de figeage / fix
Déjà, merci de prendre le temps de me répondre.
Voici les résultats de ta 1ère question tarkan99 :
Linux PC-Chris 4.4.0-64-generic #85-Ubuntu SMP Mon Feb 20 11:49:39 UTC 2017 i686 athlon i686 GNU/Linux
Architecture: i686
Mode(s) opératoire(s) des processeurs :32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 2
On-line CPU(s) list: 0,1
Thread(s) par cœur : 1
Cœur(s) par socket : 2
Socket(s): 1
Identifiant constructeur :AuthenticAMD
Famille de processeur :16
Modèle : 2
Model name: AMD Athlon(tm) 7850 Dual-Core Processor
Révision : 3
Vitesse du processeur en MHz :2812.813
BogoMIPS: 5625.62
Virtualisation : AMD-V
Cache L1d : 64K
Cache L1i : 64K
Cache L2 : 512K
Cache L3 : 2048K
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs hw_pstate vmmcall npt lbrv svm_lock
Ensuite non, pas de "Utilisation de Processor microcode ....." dans "pilotes additionnels".
Ensuite, concernant kren.log et syslog, j'imagine qu'il vous faut les 30 dernières minutes avant freeze ce qui, comme par hasard, n'est pas arrivé depuis 1 ou 2 jours... :/
Je vais donc bien laisser tourner ma machine en espérant que cela se reproduise et vous fourni les résultats dès que possible.
Hors ligne
#6 Le 05/04/2017, à 11:08
- tarkan99
Re : Aide à la détermination d'un problème de figeage / fix
ton noyau n'est à jour coté mise à jour.
c'est volontaire ?
xubuntu 22.04.1 sur machine assemblée base de Core i5 9400
Hors ligne
#7 Le 05/04/2017, à 11:33
- pusse
Re : Aide à la détermination d'un problème de figeage / fix
Non pas du tout voulu ... tu as une commande pour cela ? Ou via l'interface graphique
Hors ligne
#8 Le 05/04/2017, à 11:38
- lepetit
Re : Aide à la détermination d'un problème de figeage / fix
si c'est matériel:
test ta ram avec memtest
et un ptit test de ton disque dur avec smartmontools
regarde dans la doc
pour mettre a jour
sudo apt-get update && sudo apt-get dist-upgrade
également tu as quoi comme carte graphique? avec quel pilote, libre ou proprio ?
Dernière modification par lepetit (Le 05/04/2017, à 11:40)
-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10
Hors ligne
#9 Le 05/04/2017, à 11:40
- pusse
Re : Aide à la détermination d'un problème de figeage / fix
SI j'attends un nouveau crash et regarde dans les logs, cela m'indiquera si c'est matériel ou non ? (je pense que non mais je voulais en être sûr)
Hors ligne
#10 Le 05/04/2017, à 11:40
- lepetit
Re : Aide à la détermination d'un problème de figeage / fix
je ne pense pas
-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10
Hors ligne
#11 Le 05/04/2017, à 11:45
- pusse
Re : Aide à la détermination d'un problème de figeage / fix
Tu a une commande pour la carte graphique ? pour les pilotes ?
Hors ligne
#12 Le 05/04/2017, à 11:54
- lepetit
Re : Aide à la détermination d'un problème de figeage / fix
tu sais que la doc existe hein ?
lspci | grep "VGA compatible controller"
lshw -enable pci -class display
mais fais un memtest déjà, ça aiderait pas mal
-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10
Hors ligne
#13 Le 05/04/2017, à 11:59
- pusse
Re : Aide à la détermination d'un problème de figeage / fix
tu sais que la doc existe hein ?
JE fais tout les tests... et je vous tiens au courant
Hors ligne
#14 Le 05/04/2017, à 12:00
- lepetit
Re : Aide à la détermination d'un problème de figeage / fix
laisse le memtest durait un moment (4/5h) , laisse lui faire plusieurs pass
-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10
Hors ligne
#15 Le 05/04/2017, à 13:35
- pusse
Re : Aide à la détermination d'un problème de figeage / fix
J'ai pas eu le temps de quoi que ce soit que j'ai de nouveau freeze... je vous donne donc les résultats demandés plus haut
kern.log
Apr 5 13:27:30 PC-Chris NetworkManager[780]: <info> [1491391650.2336] device (wlan0): supplicant interface state: inactive -> associating
Apr 5 13:27:30 PC-Chris kernel: [ 65.330492] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Apr 5 13:27:30 PC-Chris NetworkManager[780]: <info> [1491391650.2404] device (wlan0): supplicant interface state: associating -> completed
Apr 5 13:27:30 PC-Chris NetworkManager[780]: <info> [1491391650.2404] device (wlan0): Activation: (wifi) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Freebox-581B2C'.
Apr 5 13:27:30 PC-Chris NetworkManager[780]: <info> [1491391650.2405] device (wlan0): state change: config -> ip-config (reason 'none') [50 70 0]
Apr 5 13:27:30 PC-Chris NetworkManager[780]: <info> [1491391650.2414] dhcp4 (wlan0): activation: beginning transaction (timeout in 45 seconds)
Apr 5 13:27:30 PC-Chris NetworkManager[780]: <info> [1491391650.2964] dhcp4 (wlan0): dhclient started with pid 4688
Apr 5 13:27:33 PC-Chris NetworkManager[780]: <info> [1491391653.3467] device (wlan0): supplicant interface state: completed -> disconnected
Apr 5 13:27:35 PC-Chris NetworkManager[780]: <info> [1491391655.2006] device (wlan0): supplicant interface state: disconnected -> scanning
Apr 5 13:27:45 PC-Chris NetworkManager[780]: <info> [1491391665.2262] device (wlan0): supplicant interface state: scanning -> associating
Apr 5 13:27:45 PC-Chris NetworkManager[780]: <info> [1491391665.2292] device (wlan0): supplicant interface state: associating -> completed
Apr 5 13:27:48 PC-Chris NetworkManager[780]: <info> [1491391668.3348] device (wlan0): supplicant interface state: completed -> disconnected
Apr 5 13:27:50 PC-Chris NetworkManager[780]: <info> [1491391670.1886] device (wlan0): supplicant interface state: disconnected -> scanning
Apr 5 13:28:00 PC-Chris NetworkManager[780]: <info> [1491391680.2037] device (wlan0): supplicant interface state: scanning -> associating
Apr 5 13:28:00 PC-Chris NetworkManager[780]: <info> [1491391680.2078] device (wlan0): supplicant interface state: associating -> 4-way handshake
Apr 5 13:28:00 PC-Chris NetworkManager[780]: <info> [1491391680.2117] device (wlan0): supplicant interface state: 4-way handshake -> disconnected
Apr 5 13:28:00 PC-Chris NetworkManager[780]: <info> [1491391680.2127] device (wlan0): Activation: (wifi) disconnected during association, asking for new key
Apr 5 13:28:00 PC-Chris NetworkManager[780]: <info> [1491391680.2128] device (wlan0): state change: ip-config -> need-auth (reason 'supplicant-disconnect') [70 60 8]
Apr 5 13:28:00 PC-Chris NetworkManager[780]: <info> [1491391680.2290] dhcp4 (wlan0): canceled DHCP transaction, DHCP client pid 4688
Apr 5 13:28:00 PC-Chris NetworkManager[780]: <info> [1491391680.2290] dhcp4 (wlan0): state changed unknown -> done
Apr 5 13:28:05 PC-Chris NetworkManager[780]: <info> [1491391685.5163] device (wlan0): supplicant interface state: disconnected -> associated
Apr 5 13:28:05 PC-Chris NetworkManager[780]: <warn> [1491391685.5166] sup-iface[0x963f268,wlan0]: connection disconnected (reason -3)
Apr 5 13:28:05 PC-Chris NetworkManager[780]: <info> [1491391685.5171] device (wlan0): supplicant interface state: associated -> inactive
Apr 5 13:28:05 PC-Chris NetworkManager[780]: <info> [1491391685.5194] device (wlan0): supplicant interface state: inactive -> disconnected
Apr 5 13:28:54 PC-Chris kernel: [ 149.944611] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Apr 5 13:28:54 PC-Chris NetworkManager[780]: <warn> [1491391734.8881] device (wlan0): User canceled the secrets request.
Apr 5 13:28:54 PC-Chris NetworkManager[780]: <info> [1491391734.8881] device (wlan0): state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Apr 5 13:28:54 PC-Chris NetworkManager[780]: <warn> [1491391734.8886] device (wlan0): Activation: failed for connection 'Freebox-581B2C'
Apr 5 13:28:54 PC-Chris NetworkManager[780]: <info> [1491391734.8891] device (wlan0): state change: failed -> disconnected (reason 'none') [120 30 0]
Apr 5 13:29:06 PC-Chris NetworkManager[780]: <info> [1491391746.6694] device (wlan0): supplicant interface state: disconnected -> inactive
et syslog
Apr 5 13:28:07 PC-Chris org.gtk.vfs.Daemon[3018]: ** (process:6083): WARNING **: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: Opération non prise en charge par le moteur
Apr 5 13:28:07 PC-Chris org.gtk.vfs.Daemon[3018]: ** (process:6096): WARNING **: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: Opération non prise en charge par le moteur
Apr 5 13:28:07 PC-Chris org.gtk.vfs.Daemon[3018]: ** (process:6104): WARNING **: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: Opération non prise en charge par le moteur
Apr 5 13:28:07 PC-Chris org.gtk.vfs.Daemon[3018]: ** (process:6083): WARNING **: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: Opération non prise en charge par le moteur
Apr 5 13:28:07 PC-Chris org.gtk.vfs.Daemon[3018]: Error calling org.gtk.vfs.MonitorClient.Changed(): L'interface « org.gtk.vfs.MonitorClient » n'existe pas pour l'objet à l'emplacement /org/gtk/vfs/client/filemonitor/1 (g-dbus-error-quark, 19)
Apr 5 13:28:07 PC-Chris org.gtk.vfs.Daemon[3018]: Error calling org.gtk.vfs.MonitorClient.Changed(): L'interface « org.gtk.vfs.MonitorClient » n'existe pas pour l'objet à l'emplacement /org/gtk/vfs/client/filemonitor/1 (g-dbus-error-quark, 19)
Apr 5 13:28:07 PC-Chris org.gtk.vfs.Daemon[3018]: ** (process:6083): WARNING **: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: Opération non prise en charge par le moteur
Apr 5 13:28:07 PC-Chris org.gtk.vfs.Daemon[3018]: Freed frame ../source3/libsmb/namequery.c:1910, expected ../source3/libsmb/libsmb_context.c:251.
Apr 5 13:28:07 PC-Chris org.gtk.vfs.Daemon[3018]: ** (process:6124): WARNING **: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: Opération non prise en charge par le moteur
Apr 5 13:28:08 PC-Chris org.gtk.vfs.Daemon[3018]: ** (process:6112): WARNING **: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: Opération non prise en charge par le moteur
Apr 5 13:28:08 PC-Chris org.gtk.vfs.Daemon[3018]: ** (process:6081): WARNING **: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: Opération non prise en charge par le moteur
Apr 5 13:28:08 PC-Chris org.gtk.vfs.Daemon[3018]: ** (process:6100): WARNING **: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: Opération non prise en charge par le moteur
Apr 5 13:28:08 PC-Chris org.gtk.vfs.Daemon[3018]: ** (process:6106): WARNING **: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: Opération non prise en charge par le moteur
Apr 5 13:28:08 PC-Chris org.gtk.vfs.Daemon[3018]: ** (process:6079): WARNING **: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: Opération non prise en charge par le moteur
Apr 5 13:28:08 PC-Chris org.gtk.vfs.Daemon[3018]: ** (process:6102): WARNING **: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: Opération non prise en charge par le moteur
Apr 5 13:28:09 PC-Chris org.gtk.vfs.Daemon[3018]: ** (process:6087): WARNING **: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: Opération non prise en charge par le moteur
Apr 5 13:28:09 PC-Chris org.gtk.vfs.Daemon[3018]: ** (process:6098): WARNING **: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: Opération non prise en charge par le moteur
Apr 5 13:28:11 PC-Chris systemd[1]: Starting Stop ureadahead data collection...
Apr 5 13:28:11 PC-Chris systemd[1]: Stopped Read required files in advance.
Apr 5 13:28:11 PC-Chris systemd[1]: Started Stop ureadahead data collection.
Apr 5 13:28:54 PC-Chris kernel: [ 149.944611] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Apr 5 13:28:54 PC-Chris NetworkManager[780]: <warn> [1491391734.8881] device (wlan0): User canceled the secrets request.
Apr 5 13:28:54 PC-Chris NetworkManager[780]: <info> [1491391734.8881] device (wlan0): state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Apr 5 13:28:54 PC-Chris NetworkManager[780]: <warn> [1491391734.8886] device (wlan0): Activation: failed for connection 'Freebox-581B2C'
Apr 5 13:28:54 PC-Chris NetworkManager[780]: <info> [1491391734.8891] device (wlan0): state change: failed -> disconnected (reason 'none') [120 30 0]
Apr 5 13:28:54 PC-Chris avahi-daemon[795]: Withdrawing address record for fe80::222:3fff:fee2:dc40 on wlan0.
Apr 5 13:28:54 PC-Chris avahi-daemon[795]: Leaving mDNS multicast group on interface wlan0.IPv6 with address fe80::222:3fff:fee2:dc40.
Apr 5 13:28:54 PC-Chris avahi-daemon[795]: Interface wlan0.IPv6 no longer relevant for mDNS.
Apr 5 13:29:02 PC-Chris dbus[728]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Apr 5 13:29:06 PC-Chris NetworkManager[780]: <info> [1491391746.6694] device (wlan0): supplicant interface state: disconnected -> inactive
voila, si ça peux aider
Hors ligne
#16 Le 05/04/2017, à 13:42
- tarkan99
Re : Aide à la détermination d'un problème de figeage / fix
pendant le freeze, as-tu essayé l'accès à une console via Ctrl alt F1 ?
as-tu fait les màj ?
xubuntu 22.04.1 sur machine assemblée base de Core i5 9400
Hors ligne
#17 Le 05/04/2017, à 13:46
- pusse
Re : Aide à la détermination d'un problème de figeage / fix
Ni l'un ni l'autre
L'accès à la console je doute car même un ctrl-alt-supp ne me donne rien... y'a que le reboot sauvage qui fonctionne.
Concernant la mise à jour, j'attendais peut-être le retour de memtest non ?
Hors ligne
#18 Le 05/04/2017, à 21:28
- pusse
Re : Aide à la détermination d'un problème de figeage / fix
Après 4h de memtest et 3 pass, aucunes erreurs
Hors ligne
#19 Le 05/04/2017, à 22:09
- lepetit
Re : Aide à la détermination d'un problème de figeage / fix
bon test disque dur maintenant
-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10
Hors ligne
#20 Le 06/04/2017, à 21:39
- pusse
Re : Aide à la détermination d'un problème de figeage / fix
Alors un test long sur smartmontools voici les retours, negatifs
smartctl 6.5 2016-01-24 r4214 [i686-linux-4.4.0-64-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 11948 -
# 2 Extended offline Completed without error 00% 11947 -
# 3 Extended offline Completed without error 00% 11879 -
# 4 Short offline Completed without error 00% 9296 -
Une idée pour la suite ??? j'avoue que je suis dans le brouillard le plus total sachant que pour info, j'ai eu un freeze durant un premier passage de smartmontools
Hors ligne
#21 Le 06/04/2017, à 22:12
- tarkan99
Re : Aide à la détermination d'un problème de figeage / fix
lepetit aurait du donner un peu plus de précision.
Pourrais-tu donner le retour de
sudo smartctl -a /dev/sdX
où X est ton lecteur
ainsi que les 2 commandes demandées en #12, pour connaître le modèle de ta carte video
J'ai des doutes que le disque soit en cause, sinon on aurait vu des traces dans les log
xubuntu 22.04.1 sur machine assemblée base de Core i5 9400
Hors ligne
#22 Le 06/04/2017, à 22:18
- pusse
Re : Aide à la détermination d'un problème de figeage / fix
voila pour le
sudo smartctl -a /dev/sdX
smartctl 6.5 2016-01-24 r4214 [i686-linux-4.4.0-64-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K1000.B
Device Model: Hitachi HDT721032SLA360
Serial Number: STF202ML2SURSP
LU WWN Device Id: 5 000cca 346e70425
Firmware Version: ST2OA3AA
User Capacity: 320 072 933 376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Thu Apr 6 22:14:53 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4710) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 79) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 131 131 054 Pre-fail Offline - 116
3 Spin_Up_Time 0x0007 108 108 024 Pre-fail Always - 232 (Average 228)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 2592
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 1
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 123 123 020 Pre-fail Offline - 34
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 11949
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2592
192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 2699
193 Load_Cycle_Count 0x0012 098 098 000 Old_age Always - 2699
194 Temperature_Celsius 0x0002 133 133 000 Old_age Always - 45 (Min/Max 15/51)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 4
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 4 occurred at disk power-on lifetime: 9295 hours (387 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 10 01 0a fe
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
fe a2 01 10 01 0a e0 02 00:03:36.800 [VENDOR SPECIFIC]
fe a2 01 10 01 0a fe 04 00:03:36.800 [VENDOR SPECIFIC]
fe a2 01 10 01 0a e0 02 00:03:32.500 [VENDOR SPECIFIC]
fe a2 01 10 01 0a fe 04 00:03:32.500 [VENDOR SPECIFIC]
fe a2 01 10 01 0a e0 02 00:03:28.100 [VENDOR SPECIFIC]
Error 3 occurred at disk power-on lifetime: 9295 hours (387 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 10 01 0a fe
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
fe a2 01 10 01 0a e0 02 00:03:32.500 [VENDOR SPECIFIC]
fe a2 01 10 01 0a fe 04 00:03:32.500 [VENDOR SPECIFIC]
fe a2 01 10 01 0a e0 02 00:03:28.100 [VENDOR SPECIFIC]
fe a2 01 10 01 0a fe 04 00:03:28.100 [VENDOR SPECIFIC]
fe a2 01 10 01 0a e0 02 00:03:23.700 [VENDOR SPECIFIC]
Error 2 occurred at disk power-on lifetime: 9295 hours (387 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 10 01 0a fe
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
fe a2 01 10 01 0a e0 02 00:03:28.100 [VENDOR SPECIFIC]
fe a2 01 10 01 0a fe 04 00:03:28.100 [VENDOR SPECIFIC]
fe a2 01 10 01 0a e0 02 00:03:23.700 [VENDOR SPECIFIC]
fe a1 00 00 00 00 a0 02 00:03:23.700 [VENDOR SPECIFIC]
fe a6 50 60 6c f3 00 00 00:03:23.600 [VENDOR SPECIFIC]
Error 1 occurred at disk power-on lifetime: 9295 hours (387 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 10 01 0a fe
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
fe a2 01 10 01 0a e0 02 00:03:23.700 [VENDOR SPECIFIC]
fe a1 00 00 00 00 a0 02 00:03:23.700 [VENDOR SPECIFIC]
fe a6 50 60 6c f3 00 00 00:03:23.600 [VENDOR SPECIFIC]
c1 00 00 00 00 00 00 02 00:03:23.600 [VENDOR SPECIFIC]
fe a6 50 60 6c f3 00 00 00:03:23.500 [VENDOR SPECIFIC]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 11948 -
# 2 Extended offline Completed without error 00% 11947 -
# 3 Extended offline Completed without error 00% 11879 -
# 4 Short offline Completed without error 00% 9296 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
ainsi que
sudo lspci | grep "VGA compatible controller"
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV770 [Radeon HD 4850]
et
sudo lshw -enable pci -class display
*-display
description: VGA compatible controller
produit: RV770 [Radeon HD 4850]
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 0
information bus: pci@0000:02:00.0
version: 00
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=radeon latency=0
ressources: irq:27 mémoire:c0000000-cfffffff mémoire:dfff0000-dfffffff portE/S:e800(taille=256) mémoire:dffc0000-dffdffff
Hors ligne
#23 Le 06/04/2017, à 22:35
- tarkan99
Re : Aide à la détermination d'un problème de figeage / fix
as-tu moyen de tester suffisamment longtemps une live session avec lubuntu 16.4.2 ?
j'aimerai voir si le noyau 4.8 pose le même problème sur ton PC.
il y a bien des erreurs de mémorisées dans le disque mais ce n'est pas sans doute pas la cause du pb.
xubuntu 22.04.1 sur machine assemblée base de Core i5 9400
Hors ligne
#24 Le 06/04/2017, à 22:37
- pusse
Re : Aide à la détermination d'un problème de figeage / fix
Le problème c'est que j'utilise ce pc pour bosser donc difficile
Hors ligne
#25 Le 07/04/2017, à 06:28
- tarkan99
Re : Aide à la détermination d'un problème de figeage / fix
on va voir si la charge CPU ou mémoire seraient en cause.
que donne
[code]free -h [/code]
quand tu as ouvert tes logiciels habituels ?
Peux tu laisser tourner le moniteur système (menu système) afin de voir la charge CPU lors d'un blocage ?
Note l'heure d'un blocage et donne le nom des fichiers les plus récents
sudo -i
cd /var/log
ls -rlst
(ils sont en fin de liste)
un des fichiers peut donner une piste.
Dernière modification par tarkan99 (Le 07/04/2017, à 06:46)
xubuntu 22.04.1 sur machine assemblée base de Core i5 9400
Hors ligne