#1 Le 21/04/2017, à 17:32
- Deux
connexion xubuntu impossible
Bonjour,
je suis sous xubuntu 12.04
lorsque j'allume mon pc, je choisis ma partition xubuntu comme d'habitude, ensuite l'écran affiche
speech-dispatcher disabled; e[OK] t
c/default/speech-dispatcher
saned disabled; edit /etc/default/saned
et reste bloqué là dessus.
Quelqu'un sait-il comment faire ?
Je précise que j'ai un vieux pc, c'est pour ça que je suis resté à 12.04, car au-dessus mon pc n'était pas assez puissant.Et je précise aussi que je suis loin d'être doué en informatique...
J'ai essayé de me connecter avec le recovery mode mais il ne se passe pas grand chose, le mode attend des instructions mais je ne sais pas quoi écrire.
Merci
Dernière modification par Deux (Le 21/04/2017, à 17:35)
Hors ligne
#2 Le 23/04/2017, à 16:58
- tarkan99
Re : connexion xubuntu impossible
salut,
xubuntu 12.04 n'est plus maintenu depuis bien longtemps.
avec une session live, essai de faire un boot info pour voir si ton disque système n'est pas plein (tu trouveras toutes les info dans la partie Doc du site).
Sinon, as-tu testé lubuntu 16.04.1 en 32 bits ?
Dernière modification par tarkan99 (Le 23/04/2017, à 16:59)
xubuntu 22.04.1 sur machine assemblée base de Core i5 9400
Hors ligne
#3 Le 24/04/2017, à 14:46
- Deux
Re : connexion xubuntu impossible
Merci pour l'aide.
Je n'arrive pas à faire le boot info (j'ai suivi la procédure spéciale pour 12.04 qui est indiquée sur la documentation):
xubuntu@xubuntu:~$ sudo add-apt-repository ppa:yannubuntu/boot-repair
You are about to add the following PPA to your system:
Simple tool to repair frequent boot problems.
Website: [url]https://sourceforge.net/p/boot-repair/home[/url]
More info: [url]https://launchpad.net/~yannubuntu/+archive/ubuntu/boot-repair[/url]
Press [ENTER] to continue or ctrl-c to cancel adding it
Exception in thread Thread-1:
Traceback (most recent call last):
File "/usr/lib/python2.7/threading.py", line 551, in __bootstrap_inner
self.run()
File "/usr/lib/python2.7/dist-packages/softwareproperties/ppa.py", line 99, in run
self.add_ppa_signing_key(self.ppa_path)
File "/usr/lib/python2.7/dist-packages/softwareproperties/ppa.py", line 132, in add_ppa_signing_key
tmp_keyring_dir = tempfile.mkdtemp()
File "/usr/lib/python2.7/tempfile.py", line 322, in mkdtemp
name = names.next()
File "/usr/lib/python2.7/tempfile.py", line 141, in next
letters = [choose(c) for dummy in "123456"]
File "/usr/lib/python2.7/random.py", line 274, in choice
return seq[int(self.random() * len(seq))] # raises IndexError if seq is empty
ValueError: cannot convert float NaN to integerJe vais essayer de créér une clé usb avec boot-repair disk.
Sinon j'ai réussi à récupérer mes données grâce au livecd.
Et lubuntu a l'air effectivement plus léger donc je pense essayer de migrer vers ce système quand j'aurai réussi à accéder à xubuntu (à moins que je puisse migrer directement mais j'imagine que c'est pas possible et que ça ne réglerait pas le problème ?).
Pour l'instant je vais essayer le boot repair disk...
Modération : merci à l'avenir d'utiliser les balises code (explications ici).
Dernière modification par cqfd93 (Le 24/04/2017, à 17:40)
Hors ligne
#4 Le 24/04/2017, à 15:06
- tarkan99
Re : connexion xubuntu impossible
via le liveCD, peux-tu faire une analyse smart du disque ?
Avant de lancer une installation, mieux vaut s'assurer que le disque est sain.
https://doc.ubuntu-fr.org/smartmontools … ssion_live
puis
sudo smartctl -a /dev/sdXoù X est le disque
Si le disque est sain et si tu as récupéré toutes des données, je te conseille d'installer lubuntu en partant de 0.
xubuntu 22.04.1 sur machine assemblée base de Core i5 9400
Hors ligne
#5 Le 25/04/2017, à 14:59
- Deux
Re : connexion xubuntu impossible
Ok, donc j'ai d'abord tapé la commande pour avoir les infos trouvées par SMART sur le disque
(pour info mon disque a une partition avec windows xp dessus)
xubuntu@xubuntu:~$ sudo smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-58-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Maxtor DiamondMax Plus 9
Device Model: Maxtor 6Y080L0
Serial Number: Y27QQHDE
Firmware Version: YAR41BW0
User Capacity: 80 000 000 000 bytes [80,0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Tue Apr 25 12:03:33 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 241) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 36) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 224 224 063 Pre-fail Always - 9597
4 Start_Stop_Count 0x0032 251 251 000 Old_age Always - 5679
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 0
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 251 238 187 Pre-fail Always - 64610
9 Power_On_Minutes 0x0032 094 094 000 Old_age Always - 530h+19m
10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 239 239 000 Old_age Always - 5538
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 37
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 6317
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 197 189 000 Old_age Offline - 10
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 213 000 Old_age Always - 13
202 Data_Address_Mark_Errs 0x000a 253 247 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 1
204 Soft_ECC_Correction 0x000a 253 252 000 Old_age Always - 0
205 Thermal_Asperity_Rate 0x000a 253 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0
208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0
209 Offline_Seek_Performnce 0x0024 194 190 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
SMART Error Log Version: 1
Warning: ATA error count 11 inconsistent with error log pointer 5
ATA Error Count: 11 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 11 occurred at disk power-on lifetime: 5293 hours (220 days + 13 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 41 6e 29 a8 e4 Error: ICRC, ABRT at LBA = 0x04a8296e = 78129518
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 80 2f 29 a8 e4 00 00:07:20.400 WRITE DMA
ca 00 80 af 28 a8 e4 00 00:07:20.400 WRITE DMA
ca 00 80 2f 28 a8 e4 00 00:07:20.400 WRITE DMA
ca 00 80 af 27 a8 e4 00 00:07:20.400 WRITE DMA
ca 00 80 2f 27 a8 e4 00 00:07:20.400 WRITE DMA
Error 10 occurred at disk power-on lifetime: 5293 hours (220 days + 13 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 06 29 12 a8 e4 Error: ICRC, ABRT at LBA = 0x04a81229 = 78123561
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 80 af 11 a8 e4 00 00:04:42.336 WRITE DMA
ca 00 80 2f 11 a8 e4 00 00:04:42.336 WRITE DMA
ca 00 80 af 10 a8 e4 00 00:04:42.336 WRITE DMA
ca 00 80 2f 10 a8 e4 00 00:04:42.336 WRITE DMA
ca 00 80 af 0f a8 e4 00 00:04:42.336 WRITE DMA
Error 9 occurred at disk power-on lifetime: 5293 hours (220 days + 13 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 e7 d2 40 e5 Error: ICRC, ABRT at LBA = 0x0540d2e7 = 88134375
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 80 e7 d2 40 e5 00 00:04:39.200 READ DMA
c8 00 80 67 d2 40 e5 00 00:04:38.992 READ DMA
c8 00 80 e7 d1 40 e5 00 00:04:38.992 READ DMA
c8 00 80 67 d1 40 e5 00 00:04:38.992 READ DMA
c8 00 80 e7 d0 40 e5 00 00:04:38.976 READ DMA
Error 8 occurred at disk power-on lifetime: 5293 hours (220 days + 13 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 6f 25 66 e2 Error: ICRC, ABRT at LBA = 0x0266256f = 40248687
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 78 6f 25 66 e2 00 00:08:11.392 READ DMA
c8 00 80 ef 24 66 e2 00 00:08:11.392 READ DMA
c8 00 08 e7 24 66 e2 00 00:08:11.392 READ DMA
c8 00 08 e7 24 66 e2 00 00:08:11.376 READ DMA
c8 00 08 3f 84 c7 e7 00 00:08:11.360 READ DMA
Error 7 occurred at disk power-on lifetime: 5293 hours (220 days + 13 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 6f 25 66 e2 Error: ICRC, ABRT at LBA = 0x0266256f = 40248687
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 78 6f 25 66 e2 00 00:32:26.304 READ DMA
c8 00 80 ef 24 66 e2 00 00:32:26.304 READ DMA
c8 00 08 e7 24 66 e2 00 00:32:26.304 READ DMA
ca 00 08 47 00 5e e0 00 00:32:26.288 WRITE DMA
ca 00 38 5f 98 5f e0 00 00:32:26.288 WRITE DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 51697 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Ensuite j'ai fait un test long dont voici le résultat:
xubuntu@xubuntu:~$ sudo smartctl -t long /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-58-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 36 minutes for test to complete.
Test will complete after Tue Apr 25 12:48:34 2017
Use smartctl -X to abort test.
xubuntu@xubuntu:~$ sudo smartctl -l selftest /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-58-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 10% 51697 129914729
# 2 Short offline Completed without error 00% 51697 -
# 3 Short offline Completed without error 00% 51697 -
# 4 Short offline Completed without error 00% 51697 -Et ça c'est le résultat de la commande infos sur l'état actuel d'un disque (mais ça a l'air de ressembler à la première partie de mon message)
xubuntu@xubuntu:~$ sudo smartctl -s on -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-58-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Maxtor DiamondMax Plus 9
Device Model: Maxtor 6Y080L0
Serial Number: Y27QQHDE
Firmware Version: YAR41BW0
User Capacity: 80 000 000 000 bytes [80,0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Tue Apr 25 13:02:03 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 113) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 241) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 36) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 224 224 063 Pre-fail Always - 9597
4 Start_Stop_Count 0x0032 251 251 000 Old_age Always - 5679
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 2
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 250 238 187 Pre-fail Always - 38868
9 Power_On_Minutes 0x0032 094 094 000 Old_age Always - 531h+17m
10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 239 239 000 Old_age Always - 5538
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 37
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 5118
196 Reallocated_Event_Count 0x0008 251 251 000 Old_age Offline - 2
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 2
198 Offline_Uncorrectable 0x0008 250 250 000 Old_age Offline - 3
199 UDMA_CRC_Error_Count 0x0008 197 189 000 Old_age Offline - 10
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 213 000 Old_age Always - 7
202 Data_Address_Mark_Errs 0x000a 253 247 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 2
204 Soft_ECC_Correction 0x000a 253 252 000 Old_age Always - 0
205 Thermal_Asperity_Rate 0x000a 253 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0
208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0
209 Offline_Seek_Performnce 0x0024 194 190 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
SMART Error Log Version: 1
Warning: ATA error count 11 inconsistent with error log pointer 5
ATA Error Count: 11 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 11 occurred at disk power-on lifetime: 5293 hours (220 days + 13 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 41 6e 29 a8 e4 Error: ICRC, ABRT at LBA = 0x04a8296e = 78129518
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 80 2f 29 a8 e4 00 00:07:20.400 WRITE DMA
ca 00 80 af 28 a8 e4 00 00:07:20.400 WRITE DMA
ca 00 80 2f 28 a8 e4 00 00:07:20.400 WRITE DMA
ca 00 80 af 27 a8 e4 00 00:07:20.400 WRITE DMA
ca 00 80 2f 27 a8 e4 00 00:07:20.400 WRITE DMA
Error 10 occurred at disk power-on lifetime: 5293 hours (220 days + 13 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 06 29 12 a8 e4 Error: ICRC, ABRT at LBA = 0x04a81229 = 78123561
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 80 af 11 a8 e4 00 00:04:42.336 WRITE DMA
ca 00 80 2f 11 a8 e4 00 00:04:42.336 WRITE DMA
ca 00 80 af 10 a8 e4 00 00:04:42.336 WRITE DMA
ca 00 80 2f 10 a8 e4 00 00:04:42.336 WRITE DMA
ca 00 80 af 0f a8 e4 00 00:04:42.336 WRITE DMA
Error 9 occurred at disk power-on lifetime: 5293 hours (220 days + 13 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 e7 d2 40 e5 Error: ICRC, ABRT at LBA = 0x0540d2e7 = 88134375
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 80 e7 d2 40 e5 00 00:04:39.200 READ DMA
c8 00 80 67 d2 40 e5 00 00:04:38.992 READ DMA
c8 00 80 e7 d1 40 e5 00 00:04:38.992 READ DMA
c8 00 80 67 d1 40 e5 00 00:04:38.992 READ DMA
c8 00 80 e7 d0 40 e5 00 00:04:38.976 READ DMA
Error 8 occurred at disk power-on lifetime: 5293 hours (220 days + 13 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 6f 25 66 e2 Error: ICRC, ABRT at LBA = 0x0266256f = 40248687
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 78 6f 25 66 e2 00 00:08:11.392 READ DMA
c8 00 80 ef 24 66 e2 00 00:08:11.392 READ DMA
c8 00 08 e7 24 66 e2 00 00:08:11.392 READ DMA
c8 00 08 e7 24 66 e2 00 00:08:11.376 READ DMA
c8 00 08 3f 84 c7 e7 00 00:08:11.360 READ DMA
Error 7 occurred at disk power-on lifetime: 5293 hours (220 days + 13 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 6f 25 66 e2 Error: ICRC, ABRT at LBA = 0x0266256f = 40248687
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 78 6f 25 66 e2 00 00:32:26.304 READ DMA
c8 00 80 ef 24 66 e2 00 00:32:26.304 READ DMA
c8 00 08 e7 24 66 e2 00 00:32:26.304 READ DMA
ca 00 08 47 00 5e e0 00 00:32:26.288 WRITE DMA
ca 00 38 5f 98 5f e0 00 00:32:26.288 WRITE DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 10% 51697 129914729
# 2 Short offline Completed without error 00% 51697 -
# 3 Short offline Completed without error 00% 51697 -
# 4 Short offline Completed without error 00% 51697 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Dernière modification par Deux (Le 25/04/2017, à 15:04)
Hors ligne
#6 Le 25/04/2017, à 16:14
- tarkan99
Re : connexion xubuntu impossible
on voit des erreurs, mais je laisse un expert indiquer la gravité de la situation.
xubuntu 22.04.1 sur machine assemblée base de Core i5 9400
Hors ligne