Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 24/04/2017, à 23:42

renlo

[Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

bonjour,

j'ai un petit problème d'installation sur un tochiba satellite P30-157 avec 1 Go de ram.
je désir le mettre en dual boot Windows XP dans un premier temps.

je précise, que mon image iso est vérifié avec QuickHashet et que l'installation se fait à l'aide d'une clef usb que je test à chaque fois sur un autre ordi.

- première tentative : ubuntu-16.04.2-desktop-i386
après un passage dans le bios, ça se lance. l'ordi ce met en veille toutes les 10 secondes pendant le lancement d'ubuntu m'obligent à appuyer sur le bouton marche qui passe  à l'orange (bleu normalement). après que la session ce soit lansé, ubuntu continu de se mettre en veille toute les 10 secondes.

je me dit que j'étais un peu optimiste et passe à xubuntu.

-deuxième tentative : xubuntu-16.04.2-desktop-i386
cette fois si, la mise en pause ne se produit qu'une seul fois pendant le lancement du système.
j'ai l'impression que malgré se démarrage difficile ça fonctionne.
hé bé non. quand je veux l'éteindre, obligé de le faire à la boudin (5 secondes sur le bouton). sinon il se met en veille comme au lancement et quand j'appuie sur le bouton, il relance la session et me demande le mot de passe.

- troisième tentative : lubuntu-16.04-alternate-i386
installation, perte du grub, réparation avec disque boot-repair, ça se lance.
l'impression que ça fonctionne. mais… même problème d'arrêt que pour xubuntu.

après plusieurs heures et quelques nuits là dessus. j'en viens à vous demandez de l'aide.
j'ai évidemment passé pas mal de temps sur le forum. mais j'y entrave que dalle. tout est devenu confus et se mélange. je ne suis pas geek pour un sous.


j'ai branché l'ordi à la box. internet fonctionne mais impossible d'avoir une adresse URL de boot-info.
voici le résultat :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 23Nov2014]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
    the same hard drive for core.img. core.img is at this location and looks
    for (,msdos6)/boot/grub.
 => Grub2 (v2.00) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 2000/XP: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows XP
    Boot files:        /boot.ini /ntldr /NTDETECT.COM

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info:

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info:

sda6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:
    Operating System:  Ubuntu 16.04 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab
                       /boot/grub/i386-pc/core.img

sdb1: __________________________________________________________________________

    File system:       iso9660
    Boot sector type:  Unknown
    Boot sector info:
    Operating System:
    Boot files:

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 100.0 GB, 100030242816 bytes
255 heads, 63 sectors/track, 12161 cylinders, total 195371568 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *             63   128,692,484   128,692,422   7 NTFS / exFAT / HPFS
/dev/sda2         128,694,270   195,371,007    66,676,738   5 Extended
/dev/sda5         193,277,952   195,371,007     2,093,056  82 Linux swap / Solaris
/dev/sda6         128,694,272   193,277,951    64,583,680  83 Linux


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 8046 MB, 8046772224 bytes
64 heads, 32 sectors/track, 7674 cylinders, total 15716352 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *             64     1,478,655     1,478,592  17 Hidden NTFS / HPFS


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs
/dev/sda1        BC94F38894F34404                       ntfs
/dev/sda5        646824f3-4a79-4b3e-ac54-b011d68392e0   swap
/dev/sda6        2e2187b7-4136-4c98-82dc-91337f52cb0c   ext4
/dev/sdb1                                               iso9660    Lubuntu 16.04 LTS i386
/dev/sr0                                                iso9660    Boot-Repair-Disk 32bit
/dev/zram0       ffc9f6f3-23b2-45c0-a6cf-3ecafd31e612   swap

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Apr 24 21:56 ata-MATSHITADVD-RAM_UJ-831S -> ../../sr0
lrwxrwxrwx 1 root root  9 Apr 24 22:00 ata-TOSHIBA_MK1031GAS_15M36049S -> ../../sda
lrwxrwxrwx 1 root root 10 Apr 24 22:01 ata-TOSHIBA_MK1031GAS_15M36049S-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr 24 21:56 ata-TOSHIBA_MK1031GAS_15M36049S-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr 24 21:56 ata-TOSHIBA_MK1031GAS_15M36049S-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Apr 24 21:56 ata-TOSHIBA_MK1031GAS_15M36049S-part6 -> ../../sda6
lrwxrwxrwx 1 root root  9 Apr 24 22:00 usb-PNY_Transformer_AA00000000000484-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Apr 24 21:56 usb-PNY_Transformer_AA00000000000484-0:0-part1 -> ../../sdb1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sr0         /cdrom                   iso9660    (ro,noatime)


================================ sda1/boot.ini: ================================

--------------------------------------------------------------------------------
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP dition familiale" /noexecute=optin /fastdetect
--------------------------------------------------------------------------------

=========================== sda6/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  2e2187b7-4136-4c98-82dc-91337f52cb0c
else
  search --no-floppy --fs-uuid --set=root 2e2187b7-4136-4c98-82dc-91337f52cb0c
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
    set gfxpayload="${1}"
    if [ "${1}" = "keep" ]; then
        set vt_handoff=vt.handoff=7
    else
        set vt_handoff=
    fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-2e2187b7-4136-4c98-82dc-91337f52cb0c' {
    recordfail
    load_video
    gfxmode $linux_gfx_mode
    insmod gzio
    if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos6'
    if [ x$feature_platform_search_hint = xy ]; then
      search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  2e2187b7-4136-4c98-82dc-91337f52cb0c
    else
      search --no-floppy --fs-uuid --set=root 2e2187b7-4136-4c98-82dc-91337f52cb0c
    fi
        linux    /boot/vmlinuz-4.4.0-21-generic root=UUID=2e2187b7-4136-4c98-82dc-91337f52cb0c ro  quiet splash $vt_handoff
    initrd    /boot/initrd.img-4.4.0-21-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-2e2187b7-4136-4c98-82dc-91337f52cb0c' {
    menuentry 'Ubuntu, with Linux 4.4.0-21-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-advanced-2e2187b7-4136-4c98-82dc-91337f52cb0c' {
        recordfail
        load_video
        gfxmode $linux_gfx_mode
        insmod gzio
        if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
        insmod part_msdos
        insmod ext2
        set root='hd0,msdos6'
        if [ x$feature_platform_search_hint = xy ]; then
          search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  2e2187b7-4136-4c98-82dc-91337f52cb0c
        else
          search --no-floppy --fs-uuid --set=root 2e2187b7-4136-4c98-82dc-91337f52cb0c
        fi
        echo    'Loading Linux 4.4.0-21-generic ...'
            linux    /boot/vmlinuz-4.4.0-21-generic root=UUID=2e2187b7-4136-4c98-82dc-91337f52cb0c ro  quiet splash $vt_handoff
        echo    'Loading initial ramdisk ...'
        initrd    /boot/initrd.img-4.4.0-21-generic
    }
    menuentry 'Ubuntu, with Linux 4.4.0-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-recovery-2e2187b7-4136-4c98-82dc-91337f52cb0c' {
        recordfail
        load_video
        insmod gzio
        if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
        insmod part_msdos
        insmod ext2
        set root='hd0,msdos6'
        if [ x$feature_platform_search_hint = xy ]; then
          search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  2e2187b7-4136-4c98-82dc-91337f52cb0c
        else
          search --no-floppy --fs-uuid --set=root 2e2187b7-4136-4c98-82dc-91337f52cb0c
        fi
        echo    'Loading Linux 4.4.0-21-generic ...'
            linux    /boot/vmlinuz-4.4.0-21-generic root=UUID=2e2187b7-4136-4c98-82dc-91337f52cb0c ro single nomodeset
        echo    'Loading initial ramdisk ...'
        initrd    /boot/initrd.img-4.4.0-21-generic
    }
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows NT/2000/XP (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-BC94F38894F34404' {
    insmod part_msdos
    insmod ntfs
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
      search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  BC94F38894F34404
    else
      search --no-floppy --fs-uuid --set=root BC94F38894F34404
    fi
    parttool ${root} hidden-
    drivemap -s (hd0) ${root}
    chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda6/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda6 during installation
UUID=2e2187b7-4136-4c98-82dc-91337f52cb0c /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=646824f3-4a79-4b3e-ac54-b011d68392e0 none            swap    sw              0       0
--------------------------------------------------------------------------------

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sda2

00000000  4d 00 45 00 44 00 49 00  55 00 4d 00 00 00 90 90  |M.E.D.I.U.M.....|
00000010  45 00 58 00 54 00 52 00  41 00 42 00 4f 00 4c 00  |E.X.T.R.A.B.O.L.|
00000020  44 00 00 00 42 00 4f 00  4c 00 44 00 00 00 90 90  |D...B.O.L.D.....|
00000030  55 00 4c 00 54 00 52 00  41 00 4c 00 49 00 47 00  |U.L.T.R.A.L.I.G.|
00000040  48 00 54 00 00 00 90 90  48 00 45 00 41 00 56 00  |H.T.....H.E.A.V.|
00000050  59 00 00 00 44 00 45 00  4d 00 49 00 42 00 4f 00  |Y...D.E.M.I.B.O.|
00000060  4c 00 44 00 00 00 90 90  52 00 45 00 47 00 55 00  |L.D.....R.E.G.U.|
00000070  4c 00 41 00 52 00 00 00  42 00 4c 00 41 00 43 00  |L.A.R...B.L.A.C.|
00000080  4b 00 00 00 55 00 4c 00  54 00 52 00 41 00 42 00  |K...U.L.T.R.A.B.|
00000090  4f 00 4c 00 44 00 00 00  44 00 52 00 41 00 46 00  |O.L.D...D.R.A.F.|
000000a0  54 00 00 00 4e 00 4f 00  4e 00 41 00 4e 00 54 00  |T...N.O.N.A.N.T.|
000000b0  49 00 41 00 4c 00 49 00  41 00 53 00 45 00 44 00  |I.A.L.I.A.S.E.D.|
000000c0  00 00 90 90 50 00 52 00  4f 00 4f 00 46 00 00 00  |....P.R.O.O.F...|
000000d0  43 00 4c 00 45 00 41 00  52 00 54 00 59 00 50 00  |C.L.E.A.R.T.Y.P.|
000000e0  45 00 00 00 41 00 4e 00  54 00 49 00 41 00 4c 00  |E...A.N.T.I.A.L.|
000000f0  49 00 41 00 53 00 45 00  44 00 00 00 43 00 4c 00  |I.A.S.E.D...C.L.|
00000100  45 00 41 00 52 00 54 00  59 00 50 00 45 00 5f 00  |E.A.R.T.Y.P.E._.|
00000110  4e 00 41 00 54 00 55 00  52 00 41 00 4c 00 00 00  |N.A.T.U.R.A.L...|
00000120  55 8b ec 0f b7 45 10 50  ff 75 0c ff 75 08 e8 04  |U....E.P.u..u...|
00000130  00 00 00 5d c2 0c 00 55  8b ec 83 e4 f8 6a ff 68  |...]...U.....j.h|
00000140  80 84 27 10 64 a1 00 00  00 00 50 83 ec 38 53 56  |..'.d.....P..8SV|
00000150  57 a1 c0 02 2a 10 33 c4  50 8d 44 24 48 64 a3 00  |W...*.3.P.D$Hd..|
00000160  00 00 00 8b 45 08 8d 4c  24 24 ff 30 e8 6b e7 ff  |....E..L$$.0.k..|
00000170  ff 8b 7d 0c 33 db 8b cf  89 5c 24 50 e8 52 46 ee  |..}.3....\$P.RF.|
00000180  ff 6a ff 8b cf e8 6c d8  e9 ff 68 a0 37 09 10 8d  |.j....l...h.7...|
00000190  4c 24 18 89 5c 24 20 89  5c 24 24 e8 71 65 ee ff  |L$..\$ .\$$.qe..|
000001a0  8d 44 24 1c 50 8d 44 24  18 50 8d 4c 24 2c c6 44  |.D$.P.D$.P.L$,.D|
000001b0  24 58 01 e8 e5 0a 00 00  8b d8 c6 44 24 50 00 fe  |$X.........D$P..|
000001c0  ff ff 82 fe ff ff 02 78  d9 03 00 f0 1f 00 00 fe  |.......x........|
000001d0  ff ff 05 fe ff ff 01 00  00 00 01 78 d9 03 00 00  |...........x....|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

Unknown BootLoader on sdb1

00000000  01 43 44 30 30 31 01 00  20 20 20 20 20 20 20 20  |.CD001..        |
00000010  20 20 20 20 20 20 20 20  20 20 20 20 20 20 20 20  |                |
00000020  20 20 20 20 20 20 20 20  4c 75 62 75 6e 74 75 20  |        Lubuntu |
00000030  31 36 2e 30 34 20 4c 54  53 20 69 33 38 36 20 20  |16.04 LTS i386  |
00000040  20 20 20 20 20 20 20 20  00 00 00 00 00 00 00 00  |        ........|
00000050  00 a4 05 00 00 05 a4 00  00 00 00 00 00 00 00 00  |................|
00000060  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000070  00 00 00 00 00 00 00 00  01 00 00 01 01 00 00 01  |................|
00000080  00 08 08 00 0a 4a 00 00  00 00 4a 0a 8c 04 00 00  |.....J....J.....|
00000090  00 00 00 00 00 00 04 96  00 00 00 00 22 00 23 00  |............".#.|
000000a0  00 00 00 00 00 23 00 08  00 00 00 00 08 00 74 04  |.....#........t.|
000000b0  14 14 0b 0c 00 02 00 00  01 00 00 01 01 00 20 20  |..............  |
000000c0  20 20 20 20 20 20 20 20  20 20 20 20 20 20 20 20  |                |
*
000001b0  20 20 20 20 20 20 20 20  20 20 20 20 20 20 58 4f  |              XO|
000001c0  52 52 49 53 4f 2d 31 2e  31 2e 38 20 32 30 31 31  |RRISO-1.1.8 2011|
000001d0  2e 31 31 2e 32 30 2e 31  37 33 30 30 31 2c 20 4c  |.11.20.173001, L|
000001e0  49 42 49 53 4f 42 55 52  4e 2d 31 2e 31 2e 38 2c  |IBISOBURN-1.1.8,|
000001f0  20 4c 49 42 49 53 4f 46  53 2d 31 2e 31 2e 36 2c  | LIBISOFS-1.1.6,|
00000200


=============================== StdErr Messages: ===============================

cat: write error: Broken pipe
File descriptor 9 (/proc/8528/mounts) leaked on lvs invocation. Parent PID 14966: bash
File descriptor 63 (pipe:[35368]) leaked on lvs invocation. Parent PID 14966: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-repair 2017-04-24__22h00 ===================
boot-repair version : 4ppa14
boot-sav version : 4ppa14
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa14
File descriptor 9 (/proc/8528/mounts) leaked on lvs invocation. Parent PID 10046: /bin/sh
No volume groups found
boot-repair is executed in live-session (Boot-Repair-Disk 32bit 29nov2014, trusty, Ubuntu, i686)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s):        32-bit
file=/cdrom/preseed/lubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- debian-installer/language=fr keyboard-configuration/layoutcode?=fr keyboard-configuration/variantcode?=oss

=================== os-prober:
/dev/sda1:Windows NT/2000/XP:Windows:chain
/dev/sda6:Ubuntu 16.04 LTS (16.04):Ubuntu:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="BC94F38894F34404" TYPE="ntfs"
/dev/sda5: UUID="646824f3-4a79-4b3e-ac54-b011d68392e0" TYPE="swap"
/dev/sda6: UUID="2e2187b7-4136-4c98-82dc-91337f52cb0c" TYPE="ext4"
/dev/sr0: LABEL="Boot-Repair-Disk 32bit" TYPE="iso9660"
/dev/sdb1: LABEL="Lubuntu 16.04 LTS i386" TYPE="iso9660"
/dev/zram0: UUID="ffc9f6f3-23b2-45c0-a6cf-3ecafd31e612" TYPE="swap"


1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.

=================== sda6/etc/grub.d/ :
drwxr-xr-x  2 root root     4096 avril 18 20:56 grub.d
drwxr-xr-x  2 root root     4096 avril 18 19:37 grub.d.bak
total 76
-rwxr-xr-x 1 root root  9791 mars  24 06:35 00_header
-rwxr-xr-x 1 root root  6258 mars  15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 mars  24 06:35 10_linux
-rwxr-xr-x 1 root root 11082 mars  24 06:35 20_linux_xen
-rwxr-xr-x 1 root root 11692 mars  24 06:35 30_os-prober
-rwxr-xr-x 1 root root  1418 mars  24 06:35 30_uefi-firmware
-rwxr-xr-x 1 root root   214 mars  24 06:35 40_custom
-rwxr-xr-x 1 root root   216 mars  24 06:35 41_custom
-rw-r--r-- 1 root root   483 mars  24 06:35 README




=================== sda6/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



=================== UEFI/Legacy mode:
This live-session is not EFI-compatible.
SecureBoot maybe enabled.


=================== PARTITIONS & DISKS:
sda1    : sda,    not-sepboot,    no-grubenv    nogrub,    no-docgrub,    no-update-grub,    32,    no-boot,    is-os,    not--efi--part,    part-has-no-fstab,    part-has-no-fstab,    ntldr,    no-winload,    no-recov-nor-hid,    no-bmgr,    notwinboot,    nopakmgr,    nogrubinstall,    no---usr,    part-has-no-fstab,    not-sep-usr,    standard,    not-far,    /mnt/boot-sav/sda1.
sda6    : sda,    not-sepboot,    grubenv-ok    grub2,    signed grub-pc ,    update-grub,    32,    with-boot,    is-os,    not--efi--part,    fstab-without-boot,    fstab-without-efi,    no-nt,    no-winload,    no-recov-nor-hid,    no-bmgr,    notwinboot,    apt-get,    grub-install,    with--usr,    fstab-without-usr,    not-sep-usr,    standard,    not-far,    /mnt/boot-sav/sda6.

sda    : not-GPT,    BIOSboot-not-needed,    has-no-EFIpart,     not-usb,    has-os,    63 sectors * 512 bytes


=================== parted -l:

Model: ATA TOSHIBA MK1031GA (scsi)
Disk /dev/sda: 100GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type      File system     Flags
1      32.3kB  65.9GB  65.9GB  primary   ntfs            boot
2      65.9GB  100GB   34.1GB  extended
6      65.9GB  99.0GB  33.1GB  logical   ext4
5      99.0GB  100GB   1072MB  logical   linux-swap(v1)


Model: PNY Transformer (scsi)
Disk /dev/sdb: 8047MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End    Size   Type     File system  Flags
1      32.8kB  757MB  757MB  primary               boot, hidden




Warning: Unable to open /dev/sr0 read-write (Read-only file system).  /dev/sr0
has been opened read-only.


Error: /dev/sr0: unrecognised disk label



Error: /dev/zram0: unrecognised disk label

=================== parted -lm:

BYT;
/dev/sda:100GB:scsi:512:512:msdos:ATA TOSHIBA MK1031GA;
1:32.3kB:65.9GB:65.9GB:ntfs::boot;
2:65.9GB:100GB:34.1GB:::;
6:65.9GB:99.0GB:33.1GB:ext4::;
5:99.0GB:100GB:1072MB:linux-swap(v1)::;

BYT;
/dev/sdb:8047MB:scsi:512:512:msdos:PNY Transformer;
1:32.8kB:757MB:757MB:::boot, hidden;



Warning: Unable to open /dev/sr0 read-write (Read-only file system).  /dev/sr0
has been opened read-only.


Error: /dev/sr0: unrecognised disk label



Error: /dev/zram0: unrecognised disk label


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=lubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda6 on /mnt/boot-sav/sda6 type ext4 (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  agpgart autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse fw0 hpet input kmsg log mapper mcelog mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sda6 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom vga_arbiter vhci vhost-net zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 3f 00 00 00  |........?...?...|
00000020  00 00 00 00 80 00 80 00  c0 b0 ab 07 00 00 00 00  |................|
00000030  10 00 00 00 00 00 00 00  6c f5 01 00 00 00 00 00  |........l.......|
00000040  f6 00 00 00 01 00 00 00  04 44 f3 94 88 f3 94 bc  |.........D......|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb b8 c0 07  |.....3.....|....|
00000060  8e d8 e8 16 00 b8 00 0d  8e c0 33 db c6 06 0e 00  |..........3.....|
00000070  10 e8 53 00 68 00 0d 68  6a 02 cb 8a 16 24 00 b4  |..S.h..hj....$..|
00000080  08 cd 13 73 05 b9 ff ff  8a f1 66 0f b6 c6 40 66  |...s......f...@f|
00000090  0f b6 d1 80 e2 3f f7 e2  86 cd c0 ed 06 41 66 0f  |.....?.......Af.|
000000a0  b7 c9 66 f7 e1 66 a3 20  00 c3 b4 41 bb aa 55 8a  |..f..f. ...A..U.|
000000b0  16 24 00 cd 13 72 0f 81  fb 55 aa 75 09 f6 c1 01  |.$...r...U.u....|
000000c0  74 04 fe 06 14 00 c3 66  60 1e 06 66 a1 10 00 66  |t......f`..f...f|
000000d0  03 06 1c 00 66 3b 06 20  00 0f 82 3a 00 1e 66 6a  |....f;. ...:..fj|
000000e0  00 66 50 06 53 66 68 10  00 01 00 80 3e 14 00 00  |.fP.Sfh.....>...|
000000f0  0f 85 0c 00 e8 b3 ff 80  3e 14 00 00 0f 84 61 00  |........>.....a.|
00000100  b4 42 8a 16 24 00 16 1f  8b f4 cd 13 66 58 5b 07  |.B..$.......fX[.|
00000110  66 58 66 58 1f eb 2d 66  33 d2 66 0f b7 0e 18 00  |fXfX..-f3.f.....|
00000120  66 f7 f1 fe c2 8a ca 66  8b d0 66 c1 ea 10 f7 36  |f......f..f....6|
00000130  1a 00 86 d6 8a 16 24 00  8a e8 c0 e4 06 0a cc b8  |......$.........|
00000140  01 02 cd 13 0f 82 19 00  8c c0 05 20 00 8e c0 66  |........... ...f|
00000150  ff 06 10 00 ff 0e 0e 00  0f 85 6f ff 07 1f 66 61  |..........o...fa|
00000160  c3 a0 f8 01 e8 09 00 a0  fb 01 e8 03 00 fb eb fe  |................|
00000170  b4 01 8b f0 ac 3c 00 74  09 b4 0e bb 07 00 cd 10  |.....<.t........|
00000180  eb f2 c3 0d 0a 45 72 72  2e 20 6c 65 63 74 75 72  |.....Err. lectur|
00000190  65 20 64 69 73 71 75 65  00 0d 0a 4e 54 4c 44 52  |e disque...NTLDR|
000001a0  20 6d 61 6e 71 75 65 00  0d 0a 4e 54 4c 44 52 20  | manque...NTLDR |
000001b0  65 73 74 20 63 6f 6d 70  72 65 73 73 82 00 0d 0a  |est compress....|
000001c0  45 6e 74 72 65 7a 20 43  74 72 6c 2b 41 6c 74 2b  |Entrez Ctrl+Alt+|
000001d0  53 75 70 70 72 20 70 6f  75 72 20 72 65 64 82 6d  |Suppr pour red.m|
000001e0  61 72 72 65 72 0d 0a 00  0d 0a 00 00 00 00 00 00  |arrer...........|
000001f0  00 00 00 00 00 00 00 00  83 99 a8 be 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs  501M   14M  488M   3% /
udev           devtmpfs   488M   12K  488M   1% /dev
tmpfs          tmpfs      101M  992K  100M   1% /run
/dev/sr0       iso9660    599M  599M     0 100% /cdrom
/dev/loop0     squashfs   543M  543M     0 100% /rofs
none           tmpfs      4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs      501M  8.0K  501M   1% /tmp
none           tmpfs      5.0M     0  5.0M   0% /run/lock
none           tmpfs      501M     0  501M   0% /run/shm
none           tmpfs      100M   16K  100M   1% /run/user
/dev/sda1      fuseblk     62G   33G   29G  53% /mnt/boot-sav/sda1
/dev/sda6      ext4        31G  2.5G   27G   9% /mnt/boot-sav/sda6

=================== fdisk -l:

Disk /dev/sda: 100.0 GB, 100030242816 bytes
255 heads, 63 sectors/track, 12161 cylinders, total 195371568 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xe6b465d9

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *          63   128692484    64346211    7  HPFS/NTFS/exFAT
/dev/sda2       128694270   195371007    33338369    5  Extended
/dev/sda5       193277952   195371007     1046528   82  Linux swap / Solaris
/dev/sda6       128694272   193277951    32291840   83  Linux

Partition table entries are not in disk order

Disk /dev/sdb: 8046 MB, 8046772224 bytes
64 heads, 32 sectors/track, 7674 cylinders, total 15716352 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x1d9d6760

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *          64     1478655      739296   17  Hidden HPFS/NTFS




=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to) and reinstall the grub2 of sda6 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s   fix-windows-boot


=================== User settings
The settings chosen by the user will not act on the boot.

j’espère ne pas avoir été trop long.
je ne sais plus quoi faire. help. merci d'avance.

Dernière modification par renlo (Le 03/05/2017, à 12:57)

Hors ligne

#2 Le 25/04/2017, à 05:23

tarkan99

Re : [Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

Salut !

pour déblayer le terrain :

Sous XP, le PC fonctionne normalement ?

ton boot info, c'est pour quelle installation ?

avant de lancer l'installation, as-tu testé la session live ?

Pour les perf de ton PC, je te conseille lubuntu 16.04.1 en 32 bits.

Dernière modification par tarkan99 (Le 25/04/2017, à 05:25)


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#3 Le 25/04/2017, à 07:20

Caribou22

Re : [Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

Bonjour ! Tu as quoi comme processeur et carte graphique ?
Regarde le lien 1 de ma signature, tu auras d'autres pistes à explorer pour ton vieux PC smile

Hors ligne

#4 Le 25/04/2017, à 12:08

renlo

Re : [Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

bonjour,
merci pour la réactivité.

dans l'ordre :

#tarkan99
- windob fonctionne normalement (pas plus lent que d'habitude).
- je ne savais pas qu'il y avait plusieurs version de "boot-info". je l'ai téléchargé via un lien du site; "boot-repair-disk-32bit"
- j'ai "vérifier l'intégrité de son image ISO" avec "QuickHash" ainsi que pour lubuntu.
- lubuntu ne permet pas "d'essayer la session live"
- je te site "je te conseille lubuntu 16.04.1 en 32 bits". j'ai installé "lubuntu-16.04-alternate-i386". ce n'est pas la même chose ?

#Caribou22
- processeur : pentium 4 32bits
- carte graphique : ATI MOBILITY Radeon 9600/9700 serie


dans le rapport du boot-info, il me propose

=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to) and reinstall the grub2 of sda6 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s   fix-windows-boot

comme ça commence à devenir un peu compliquer pour moi. je préfère vous demander vos avis avant de faire des conneries.

Hors ligne

#5 Le 25/04/2017, à 15:18

tarkan99

Re : [Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

- lubuntu ne permet pas "d'essayer la session live"

ha ? pourtant j'ai lancé un test d'une live USB de lubuntu 16.04.2, le mode "tester sans installé" était bien dispo.

- je te site "je te conseille lubuntu 16.04.1 en 32 bits". j'ai installé "lubuntu-16.04-alternate-i386". ce n'est pas la même chose ?

connais pas la version alternate donc peut pas dire.

tu ne voudrais pas refaire une live usb de lubuntu 16.04.1 32 bits ?
et là, tu pourras tester sans installer.


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#6 Le 25/04/2017, à 17:20

lucmars

Re : [Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

Apparemment ton dual-boot est ok. Le vrai probleme est que le buntu ne sache pas s'arreter.

Alors oui, la 160402, c'est pour du matos récent, mieux vaut donc la 160401, mais cela ne garantit pas ton probleme d'arret. Tarkan n'a pas tort en post 5


Gaulois Matter !

Hors ligne

#7 Le 25/04/2017, à 17:50

tarkan99

Re : [Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

+1 avec lucmars. Mais au moins, on part sur des bases saines (et mieux connues).


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#8 Le 25/04/2017, à 18:10

renlo

Re : [Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

je viens de lire ça.
donc si j'ai bien compris :
1 - alternante ne permet pas de booter en live.
2 - il est plus conseiller pour les vieilles usine à (sans) gaz.

vous me direz si je dis des conneries.
en attendant, je télécharge "lubuntu-16.04.1-alternate-i386.iso"

merci à vous.

Hors ligne

#9 Le 25/04/2017, à 18:28

lucmars

Re : [Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

renlo a écrit :

je viens de lire ça.
donc si j'ai bien compris :
1 - alternante ne permet pas de booter en live.
2 - il est plus conseiller pour les vieilles usine à (sans) gaz.

vous me direz si je dis des conneries.
en attendant, je télécharge "lubuntu-16.04.1-alternate-i386.iso"

merci à vous.

Ben, tu te tires la une balle dans le pied non? Car il te vaut mieux pouvoir booter en mode-live !!!


Gaulois Matter !

Hors ligne

#10 Le 25/04/2017, à 19:39

renlo

Re : [Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

mouai !
c'est pas faut.

bon. je télécharge le desktop.
c'est quoi les extensions, .zsync, .list, .manifest, .metalink ?

je vous tiens au courant de l'évolution.

Hors ligne

#11 Le 25/04/2017, à 19:54

renlo

Re : [Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

ma compréhension du terme booter me semble confuse.
booter c'est démarrer à partir de live cd ou live usb.
lancer un live cd ou usb pour installer. c'est booter dessus.
donc si j'ai réussis à installer "lubuntu-16.04-alternate-i386". c'est bien que j'ai réussis à booter dessus. donc "alternante" est bootable.

peut-être que "alternante" n'a pas la possibilité faire une session live. et que j'ai tout confondue.

Hors ligne

#12 Le 26/04/2017, à 00:50

renlo

Re : [Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

dans l'ordre :
1 - téléchargement de "lubuntu-16.04.1-desktop-i386" sur le site officiel
2 - vérif avec QuickHash.
3 - création dune clef live usb avec la méthode du paragraphe 4 de ce lien : https://doc.ubuntu-fr.org/live_usb
4 - essais de la clef, sans installation, sur l'ordo. tout semble fonctionner correctement (le lancement comme l'arrêt)
5 - installation (dans les choix qu'il me demande je lui ai demander d'effacer l'ancien ubuntu)
6 - 1er démarrage, se met en pause pendant le lancement. j’appuie sur le bouton, une ligne commençant par "/dev/dev6…" sur fond noir en haut à gauche. pas le temps de lire la fin de la ligne.
7 - software updater, mise en veille au bout de 10 minutes. j'appuie sur le bouton, il passe au bleu (état normale de fonctionnement) le ventilateur souffle. ça dure 20 secondes avec un écrans noir et ça se remet en veille.
8 - arrêt de force
9 - nouvelle essais;  dual boot, ubuntu, ça se lance, se met en veille, j'appuie sur le bouton, cette fois j'ai 4 à 5 lignes en haut de l'écran, lubuntu est opérationnel
10 - au bout de 9 minutes mise en veille et impossible de relancer. arrêt de force.

voici le rapport de boot info :

Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 23Nov2014]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
    the same hard drive for core.img. core.img is at this location and looks
    for (,msdos6)/boot/grub.

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 2000/XP: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows XP
    Boot files:        /boot.ini /ntldr /NTDETECT.COM

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info:

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info:

sda6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:
    Operating System:  Ubuntu 16.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab
                       /boot/grub/i386-pc/core.img

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 100.0 GB, 100030242816 bytes
255 heads, 63 sectors/track, 12161 cylinders, total 195371568 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *             63   128,692,484   128,692,422   7 NTFS / exFAT / HPFS
/dev/sda2         128,694,270   195,371,007    66,676,738   5 Extended
/dev/sda5         193,277,952   195,371,007     2,093,056  82 Linux swap / Solaris
/dev/sda6         128,694,272   193,277,951    64,583,680  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs
/dev/sda1        BC94F38894F34404                       ntfs
/dev/sda5        646824f3-4a79-4b3e-ac54-b011d68392e0   swap
/dev/sda6        b0dea6e9-72af-4c52-beff-b70463c3ab7c   ext4
/dev/sr0                                                iso9660    Boot-Repair-Disk 32bit
/dev/zram0       e7735167-3361-42e2-a05b-d8e75a18a1cd   swap

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Apr 25 23:13 ata-MATSHITADVD-RAM_UJ-831S -> ../../sr0
lrwxrwxrwx 1 root root  9 Apr 25 23:15 ata-TOSHIBA_MK1031GAS_15M36049S -> ../../sda
lrwxrwxrwx 1 root root 10 Apr 25 23:15 ata-TOSHIBA_MK1031GAS_15M36049S-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr 25 23:13 ata-TOSHIBA_MK1031GAS_15M36049S-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr 25 23:13 ata-TOSHIBA_MK1031GAS_15M36049S-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Apr 25 23:13 ata-TOSHIBA_MK1031GAS_15M36049S-part6 -> ../../sda6

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sr0         /cdrom                   iso9660    (ro,noatime)


================================ sda1/boot.ini: ================================

--------------------------------------------------------------------------------
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP dition familiale" /noexecute=optin /fastdetect
--------------------------------------------------------------------------------

=========================== sda6/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  b0dea6e9-72af-4c52-beff-b70463c3ab7c
else
  search --no-floppy --fs-uuid --set=root b0dea6e9-72af-4c52-beff-b70463c3ab7c
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
    set gfxpayload="${1}"
    if [ "${1}" = "keep" ]; then
        set vt_handoff=vt.handoff=7
    else
        set vt_handoff=
    fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-b0dea6e9-72af-4c52-beff-b70463c3ab7c' {
    recordfail
    load_video
    gfxmode $linux_gfx_mode
    insmod gzio
    if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos6'
    if [ x$feature_platform_search_hint = xy ]; then
      search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  b0dea6e9-72af-4c52-beff-b70463c3ab7c
    else
      search --no-floppy --fs-uuid --set=root b0dea6e9-72af-4c52-beff-b70463c3ab7c
    fi
    linux    /boot/vmlinuz-4.4.0-31-generic root=UUID=b0dea6e9-72af-4c52-beff-b70463c3ab7c ro  quiet splash $vt_handoff
    initrd    /boot/initrd.img-4.4.0-31-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-b0dea6e9-72af-4c52-beff-b70463c3ab7c' {
    menuentry 'Ubuntu, with Linux 4.4.0-31-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-advanced-b0dea6e9-72af-4c52-beff-b70463c3ab7c' {
        recordfail
        load_video
        gfxmode $linux_gfx_mode
        insmod gzio
        if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
        insmod part_msdos
        insmod ext2
        set root='hd0,msdos6'
        if [ x$feature_platform_search_hint = xy ]; then
          search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  b0dea6e9-72af-4c52-beff-b70463c3ab7c
        else
          search --no-floppy --fs-uuid --set=root b0dea6e9-72af-4c52-beff-b70463c3ab7c
        fi
        echo    'Loading Linux 4.4.0-31-generic ...'
        linux    /boot/vmlinuz-4.4.0-31-generic root=UUID=b0dea6e9-72af-4c52-beff-b70463c3ab7c ro  quiet splash $vt_handoff
        echo    'Loading initial ramdisk ...'
        initrd    /boot/initrd.img-4.4.0-31-generic
    }
    menuentry 'Ubuntu, with Linux 4.4.0-31-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-recovery-b0dea6e9-72af-4c52-beff-b70463c3ab7c' {
        recordfail
        load_video
        insmod gzio
        if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
        insmod part_msdos
        insmod ext2
        set root='hd0,msdos6'
        if [ x$feature_platform_search_hint = xy ]; then
          search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  b0dea6e9-72af-4c52-beff-b70463c3ab7c
        else
          search --no-floppy --fs-uuid --set=root b0dea6e9-72af-4c52-beff-b70463c3ab7c
        fi
        echo    'Loading Linux 4.4.0-31-generic ...'
        linux    /boot/vmlinuz-4.4.0-31-generic root=UUID=b0dea6e9-72af-4c52-beff-b70463c3ab7c ro recovery nomodeset
        echo    'Loading initial ramdisk ...'
        initrd    /boot/initrd.img-4.4.0-31-generic
    }
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos6'
    if [ x$feature_platform_search_hint = xy ]; then
      search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  b0dea6e9-72af-4c52-beff-b70463c3ab7c
    else
      search --no-floppy --fs-uuid --set=root b0dea6e9-72af-4c52-beff-b70463c3ab7c
    fi
    knetbsd    /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos6'
    if [ x$feature_platform_search_hint = xy ]; then
      search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6  b0dea6e9-72af-4c52-beff-b70463c3ab7c
    else
      search --no-floppy --fs-uuid --set=root b0dea6e9-72af-4c52-beff-b70463c3ab7c
    fi
    linux16    /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows NT/2000/XP (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-BC94F38894F34404' {
    insmod part_msdos
    insmod ntfs
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
      search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  BC94F38894F34404
    else
      search --no-floppy --fs-uuid --set=root BC94F38894F34404
    fi
    parttool ${root} hidden-
    drivemap -s (hd0) ${root}
    chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda6/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda6 during installation
UUID=b0dea6e9-72af-4c52-beff-b70463c3ab7c /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=646824f3-4a79-4b3e-ac54-b011d68392e0 none            swap    sw              0       0
--------------------------------------------------------------------------------

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sda2

00000000  4d 00 45 00 44 00 49 00  55 00 4d 00 00 00 90 90  |M.E.D.I.U.M.....|
00000010  45 00 58 00 54 00 52 00  41 00 42 00 4f 00 4c 00  |E.X.T.R.A.B.O.L.|
00000020  44 00 00 00 42 00 4f 00  4c 00 44 00 00 00 90 90  |D...B.O.L.D.....|
00000030  55 00 4c 00 54 00 52 00  41 00 4c 00 49 00 47 00  |U.L.T.R.A.L.I.G.|
00000040  48 00 54 00 00 00 90 90  48 00 45 00 41 00 56 00  |H.T.....H.E.A.V.|
00000050  59 00 00 00 44 00 45 00  4d 00 49 00 42 00 4f 00  |Y...D.E.M.I.B.O.|
00000060  4c 00 44 00 00 00 90 90  52 00 45 00 47 00 55 00  |L.D.....R.E.G.U.|
00000070  4c 00 41 00 52 00 00 00  42 00 4c 00 41 00 43 00  |L.A.R...B.L.A.C.|
00000080  4b 00 00 00 55 00 4c 00  54 00 52 00 41 00 42 00  |K...U.L.T.R.A.B.|
00000090  4f 00 4c 00 44 00 00 00  44 00 52 00 41 00 46 00  |O.L.D...D.R.A.F.|
000000a0  54 00 00 00 4e 00 4f 00  4e 00 41 00 4e 00 54 00  |T...N.O.N.A.N.T.|
000000b0  49 00 41 00 4c 00 49 00  41 00 53 00 45 00 44 00  |I.A.L.I.A.S.E.D.|
000000c0  00 00 90 90 50 00 52 00  4f 00 4f 00 46 00 00 00  |....P.R.O.O.F...|
000000d0  43 00 4c 00 45 00 41 00  52 00 54 00 59 00 50 00  |C.L.E.A.R.T.Y.P.|
000000e0  45 00 00 00 41 00 4e 00  54 00 49 00 41 00 4c 00  |E...A.N.T.I.A.L.|
000000f0  49 00 41 00 53 00 45 00  44 00 00 00 43 00 4c 00  |I.A.S.E.D...C.L.|
00000100  45 00 41 00 52 00 54 00  59 00 50 00 45 00 5f 00  |E.A.R.T.Y.P.E._.|
00000110  4e 00 41 00 54 00 55 00  52 00 41 00 4c 00 00 00  |N.A.T.U.R.A.L...|
00000120  55 8b ec 0f b7 45 10 50  ff 75 0c ff 75 08 e8 04  |U....E.P.u..u...|
00000130  00 00 00 5d c2 0c 00 55  8b ec 83 e4 f8 6a ff 68  |...]...U.....j.h|
00000140  80 84 27 10 64 a1 00 00  00 00 50 83 ec 38 53 56  |..'.d.....P..8SV|
00000150  57 a1 c0 02 2a 10 33 c4  50 8d 44 24 48 64 a3 00  |W...*.3.P.D$Hd..|
00000160  00 00 00 8b 45 08 8d 4c  24 24 ff 30 e8 6b e7 ff  |....E..L$$.0.k..|
00000170  ff 8b 7d 0c 33 db 8b cf  89 5c 24 50 e8 52 46 ee  |..}.3....\$P.RF.|
00000180  ff 6a ff 8b cf e8 6c d8  e9 ff 68 a0 37 09 10 8d  |.j....l...h.7...|
00000190  4c 24 18 89 5c 24 20 89  5c 24 24 e8 71 65 ee ff  |L$..\$ .\$$.qe..|
000001a0  8d 44 24 1c 50 8d 44 24  18 50 8d 4c 24 2c c6 44  |.D$.P.D$.P.L$,.D|
000001b0  24 58 01 e8 e5 0a 00 00  8b d8 c6 44 24 50 00 fe  |$X.........D$P..|
000001c0  ff ff 82 fe ff ff 02 78  d9 03 00 f0 1f 00 00 fe  |.......x........|
000001d0  ff ff 05 fe ff ff 01 00  00 00 01 78 d9 03 00 00  |...........x....|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


=============================== StdErr Messages: ===============================

cat: write error: Broken pipe
File descriptor 9 (/proc/2919/mounts) leaked on lvs invocation. Parent PID 9345: bash
File descriptor 63 (pipe:[27752]) leaked on lvs invocation. Parent PID 9345: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-repair 2017-04-25__23h14 ===================
boot-repair version : 4ppa14
boot-sav version : 4ppa14
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa14
File descriptor 9 (/proc/2919/mounts) leaked on lvs invocation. Parent PID 4740: /bin/sh
No volume groups found
boot-repair is executed in live-session (Boot-Repair-Disk 32bit 29nov2014, trusty, Ubuntu, i686)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s):        32-bit
file=/cdrom/preseed/lubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- debian-installer/language=fr keyboard-configuration/layoutcode?=fr keyboard-configuration/variantcode?=oss

=================== os-prober:
/dev/sda1:Windows NT/2000/XP:Windows:chain
/dev/sda6:Ubuntu 16.04.1 LTS (16.04):Ubuntu:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="BC94F38894F34404" TYPE="ntfs"
/dev/sda5: UUID="646824f3-4a79-4b3e-ac54-b011d68392e0" TYPE="swap"
/dev/sda6: UUID="b0dea6e9-72af-4c52-beff-b70463c3ab7c" TYPE="ext4"
/dev/sr0: LABEL="Boot-Repair-Disk 32bit" TYPE="iso9660"
/dev/zram0: UUID="e7735167-3361-42e2-a05b-d8e75a18a1cd" TYPE="swap"


1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.

=================== sda6/etc/grub.d/ :
drwxr-xr-x  2 root root     4096 juil. 20  2016 grub.d
total 76
-rwxr-xr-x 1 root root  9791 juin  17  2016 00_header
-rwxr-xr-x 1 root root  6258 mars  15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12261 juin  17  2016 10_linux
-rwxr-xr-x 1 root root 11082 juin  17  2016 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 juin  17  2016 30_os-prober
-rwxr-xr-x 1 root root  1418 juin  17  2016 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juin  17  2016 40_custom
-rwxr-xr-x 1 root root   216 juin  17  2016 41_custom
-rw-r--r-- 1 root root   483 juin  17  2016 README




=================== sda6/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



=================== UEFI/Legacy mode:
This live-session is not EFI-compatible.
SecureBoot maybe enabled.


=================== PARTITIONS & DISKS:
sda1    : sda,    not-sepboot,    no-grubenv    nogrub,    no-docgrub,    no-update-grub,    32,    no-boot,    is-os,    not--efi--part,    part-has-no-fstab,    part-has-no-fstab,    ntldr,    no-winload,    no-recov-nor-hid,    no-bmgr,    notwinboot,    nopakmgr,    nogrubinstall,    no---usr,    part-has-no-fstab,    not-sep-usr,    standard,    not-far,    /mnt/boot-sav/sda1.
sda6    : sda,    not-sepboot,    grubenv-ok    grub2,    grub-pc ,    update-grub,    32,    with-boot,    is-os,    not--efi--part,    fstab-without-boot,    fstab-without-efi,    no-nt,    no-winload,    no-recov-nor-hid,    no-bmgr,    notwinboot,    apt-get,    grub-install,    with--usr,    fstab-without-usr,    not-sep-usr,    standard,    not-far,    /mnt/boot-sav/sda6.

sda    : not-GPT,    BIOSboot-not-needed,    has-no-EFIpart,     not-usb,    has-os,    63 sectors * 512 bytes


=================== parted -l:

Model: ATA TOSHIBA MK1031GA (scsi)
Disk /dev/sda: 100GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type      File system     Flags
1      32.3kB  65.9GB  65.9GB  primary   ntfs            boot
2      65.9GB  100GB   34.1GB  extended
6      65.9GB  99.0GB  33.1GB  logical   ext4
5      99.0GB  100GB   1072MB  logical   linux-swap(v1)




Warning: Unable to open /dev/sr0 read-write (Read-only file system).  /dev/sr0
has been opened read-only.


Error: /dev/sr0: unrecognised disk label



Error: /dev/zram0: unrecognised disk label

=================== parted -lm:

BYT;
/dev/sda:100GB:scsi:512:512:msdos:ATA TOSHIBA MK1031GA;
1:32.3kB:65.9GB:65.9GB:ntfs::boot;
2:65.9GB:100GB:34.1GB:::;
6:65.9GB:99.0GB:33.1GB:ext4::;
5:99.0GB:100GB:1072MB:linux-swap(v1)::;



Warning: Unable to open /dev/sr0 read-write (Read-only file system).  /dev/sr0
has been opened read-only.


Error: /dev/sr0: unrecognised disk label



Error: /dev/zram0: unrecognised disk label


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=lubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda6 on /mnt/boot-sav/sda6 type ext4 (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  agpgart autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse fw0 hidraw0 hpet input kmsg log mapper mcelog mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sda6 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom vga_arbiter vhci vhost-net zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 3f 00 00 00  |........?...?...|
00000020  00 00 00 00 80 00 80 00  c0 b0 ab 07 00 00 00 00  |................|
00000030  10 00 00 00 00 00 00 00  6c f5 01 00 00 00 00 00  |........l.......|
00000040  f6 00 00 00 01 00 00 00  04 44 f3 94 88 f3 94 bc  |.........D......|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb b8 c0 07  |.....3.....|....|
00000060  8e d8 e8 16 00 b8 00 0d  8e c0 33 db c6 06 0e 00  |..........3.....|
00000070  10 e8 53 00 68 00 0d 68  6a 02 cb 8a 16 24 00 b4  |..S.h..hj....$..|
00000080  08 cd 13 73 05 b9 ff ff  8a f1 66 0f b6 c6 40 66  |...s......f...@f|
00000090  0f b6 d1 80 e2 3f f7 e2  86 cd c0 ed 06 41 66 0f  |.....?.......Af.|
000000a0  b7 c9 66 f7 e1 66 a3 20  00 c3 b4 41 bb aa 55 8a  |..f..f. ...A..U.|
000000b0  16 24 00 cd 13 72 0f 81  fb 55 aa 75 09 f6 c1 01  |.$...r...U.u....|
000000c0  74 04 fe 06 14 00 c3 66  60 1e 06 66 a1 10 00 66  |t......f`..f...f|
000000d0  03 06 1c 00 66 3b 06 20  00 0f 82 3a 00 1e 66 6a  |....f;. ...:..fj|
000000e0  00 66 50 06 53 66 68 10  00 01 00 80 3e 14 00 00  |.fP.Sfh.....>...|
000000f0  0f 85 0c 00 e8 b3 ff 80  3e 14 00 00 0f 84 61 00  |........>.....a.|
00000100  b4 42 8a 16 24 00 16 1f  8b f4 cd 13 66 58 5b 07  |.B..$.......fX[.|
00000110  66 58 66 58 1f eb 2d 66  33 d2 66 0f b7 0e 18 00  |fXfX..-f3.f.....|
00000120  66 f7 f1 fe c2 8a ca 66  8b d0 66 c1 ea 10 f7 36  |f......f..f....6|
00000130  1a 00 86 d6 8a 16 24 00  8a e8 c0 e4 06 0a cc b8  |......$.........|
00000140  01 02 cd 13 0f 82 19 00  8c c0 05 20 00 8e c0 66  |........... ...f|
00000150  ff 06 10 00 ff 0e 0e 00  0f 85 6f ff 07 1f 66 61  |..........o...fa|
00000160  c3 a0 f8 01 e8 09 00 a0  fb 01 e8 03 00 fb eb fe  |................|
00000170  b4 01 8b f0 ac 3c 00 74  09 b4 0e bb 07 00 cd 10  |.....<.t........|
00000180  eb f2 c3 0d 0a 45 72 72  2e 20 6c 65 63 74 75 72  |.....Err. lectur|
00000190  65 20 64 69 73 71 75 65  00 0d 0a 4e 54 4c 44 52  |e disque...NTLDR|
000001a0  20 6d 61 6e 71 75 65 00  0d 0a 4e 54 4c 44 52 20  | manque...NTLDR |
000001b0  65 73 74 20 63 6f 6d 70  72 65 73 73 82 00 0d 0a  |est compress....|
000001c0  45 6e 74 72 65 7a 20 43  74 72 6c 2b 41 6c 74 2b  |Entrez Ctrl+Alt+|
000001d0  53 75 70 70 72 20 70 6f  75 72 20 72 65 64 82 6d  |Suppr pour red.m|
000001e0  61 72 72 65 72 0d 0a 00  0d 0a 00 00 00 00 00 00  |arrer...........|
000001f0  00 00 00 00 00 00 00 00  83 99 a8 be 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs  501M   13M  488M   3% /
udev           devtmpfs   488M   12K  488M   1% /dev
tmpfs          tmpfs      101M 1000K  100M   1% /run
/dev/sr0       iso9660    599M  599M     0 100% /cdrom
/dev/loop0     squashfs   543M  543M     0 100% /rofs
none           tmpfs      4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs      501M  8.0K  501M   1% /tmp
none           tmpfs      5.0M     0  5.0M   0% /run/lock
none           tmpfs      501M     0  501M   0% /run/shm
none           tmpfs      100M   16K  100M   1% /run/user
/dev/sda1      fuseblk     62G   33G   29G  54% /mnt/boot-sav/sda1
/dev/sda6      ext4        31G  2.6G   27G   9% /mnt/boot-sav/sda6

=================== fdisk -l:

Disk /dev/sda: 100.0 GB, 100030242816 bytes
255 heads, 63 sectors/track, 12161 cylinders, total 195371568 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xe6b465d9

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *          63   128692484    64346211    7  HPFS/NTFS/exFAT
/dev/sda2       128694270   195371007    33338369    5  Extended
/dev/sda5       193277952   195371007     1046528   82  Linux swap / Solaris
/dev/sda6       128694272   193277951    32291840   83  Linux

Partition table entries are not in disk order




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda6 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s   fix-windows-boot


=================== User settings
The settings chosen by the user will not act on the boot.

'ai laissé la session live tourné 20 minutes. pas de mise en veille.

je vais craquer !

Hors ligne

#13 Le 26/04/2017, à 05:26

tarkan99

Re : [Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

bien, on va pouvoir avancer.

J'ai déjà vu un problème analogue sur lubuntu 16.04. mais je ne dis pas que la solution
sera la même.
Si le pb n’apparaît en session live, alors c'est corrigeable pour la version installée.

essaie cela :
modifie le fichier  /etc/systemd/logind.conf
(installe gksu puis

gksu leafpad /etc/systemd/logind.conf

)

modifie les lignes
#HandleSuspendKey=suspend par HandleSuspendKey=ignore
et

#HandleSuspendKey=suspend par HandleLidSwitch= ignore

source :
https://forum.ubuntu-fr.org/viewtopic.p … #p21696670

et tu redémarres

Dernière modification par tarkan99 (Le 26/04/2017, à 05:31)


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#14 Le 26/04/2017, à 11:58

renlo

Re : [Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

j'ai effectuer la commande : gksu leafpad /etc/systemd/logind.conf
remplacé "suspend" par "ignore"
et vérifié après redémarrage si ça a était pris en compte (c'est bon).

à la remise en route; mise en veille au démarrage.
la ligne sur l'écran noir :
/dev/dev6: clean,(série de chiffres)/(série de chiffres) file,(série de chiffres)/(série de chiffres) block

ou (après la mise en veille au bout de 10 minutes):
/dev/dev6: recovering journal
/dev/dev6: clearing orphaned ??????????????????????????????????????(pas le temps de lire)
/dev/dev6: clean,(série de chiffres)/(série de chiffres) file,(série de chiffres)/(série de chiffres) block
                                       
j'avais déjà ce problème avec xubuntu (en pire).

Hors ligne

#15 Le 26/04/2017, à 12:47

tarkan99

Re : [Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

attend, tu as aussi supprimé le # devant  les 2 lignes ?
si tu as laissé les #, tes modif n''ont pas été prises en compte (commentaire)

peux-tu donner le retour de

cat /etc/systemd/logind.conf

Dernière modification par tarkan99 (Le 26/04/2017, à 17:37)


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#16 Le 26/04/2017, à 18:25

renlo

Re : [Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

il est ou ton message avec bisnext ?
j'ai pas supprimé les #.

tarkan99 a écrit :

tu es sur que c'est une mise en veille ?

je ne suis pas sur que ce soit une mise en veille. ce que je peux dire c'est que le ventilateur s'arrête, l'écran passe au noir et le bouton marche passe du bleu à l'orange. dès que j'appuis sur le bouton il passe au bleu, le ventilateur se lance, l'écran s'allume et le processus reprend là ou il était (pour le lancement). pour l'arrêt, quand j'appuis sur le bouton il passe au bleu, le ventilateur se lance mais l'écran reste au noir et tout s'arrête au bout de quelques secondes le bouton passe à l'orange et ainsi de suite. obligation de faire un arrêt de force.

tarkan99 a écrit :

et dans la gestion de l'alim, tu as quoi comme réglages ?

j'ai tout mis sur jamais.
à la fin du rapport bisnext, il c'est mis en veille.
mais. quelque chose a changer!
maintenant, quand j'appuie sur le bouton il me demande le mot de passe pour accéder à la session. là deux solutions; soit une fenêtre écris en blanc sur fond noir, avec un cadenas, "session verrouiller" (une seconde) et se met en veille. soit j'ai le temps de voir la fenêtre du rapport, une seconde et se met en veille.
alors maintenant j'arrive à l'éteindre de façon normal, à condition de le faire avant qu'il se mette en veille. il continue de se faire une veille sur le démarrage.

tarkan99 a écrit :

peux-tu faire un rapport bisnext stp ?

j'ai bien exécuter les commandes du lien. mais comme il c'est mis en veille avant que j'ai eu le temps de faire quoi que se soit.
j'ai rallumé et essayer la commande : sudo bash bisnext --pastebin. y veux pas
j'ai essayer de recommencer depuis le début. y veux pas non plus. ce qui me semble normal vu que c'est déjà installé.

ça fait 20 minutes qu'il tourne. il ne sais pas mi en veille. j'y comprend rien à cette ordi.

Hors ligne

#17 Le 26/04/2017, à 18:45

renlo

Re : [Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

tout est un peu compliquer avec cette ordi. quand je branche un cable RJ45 (impossible de mettre en wifi, code avec des signes introuvable) il me fait sauter la box. seul solution, couper le wifi sur l'autre ordi si je branche celui là.
comme il se métait en veille à tout bout de champ. j'utilisais l'autre pour communiquer et faire les recherches sur le forum.
mais il c'est enfin décider à ne pas se mettre en veille. touchon du bois!

rapport bisnext :  http://paste.debian.net/929484/

pappor #15 :

maison@toutpourri:~$ cat /etc/systemd/logind.conf
#  This file is part of systemd.
#
#  systemd is free software; you can redistribute it and/or modify it
#  under the terms of the GNU Lesser General Public License as published by
#  the Free Software Foundation; either version 2.1 of the License, or
#  (at your option) any later version.
#
# Entries in this file show the compile time defaults.
# You can change settings by editing this file.
# Defaults can be restored by simply deleting this file.
#
# See logind.conf(5) for details.

[Login]
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#InhibitDelayMaxSec=5
#HandlePowerKey=poweroff
#HandleSuspendKey=ignore
#HandleHibernateKey=hibernate
#HandleLidSwitch=ignore
#HandleLidSwitchDocked=ignore
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes
#HoldoffTimeoutSec=30s
#IdleAction=ignore
#IdleActionSec=30min
#RuntimeDirectorySize=10%
#RemoveIPC=yes
#UserTasksMax=12288

la moitier des truc écris dans les barres de menu sur sont en anglais et l'autre est en français. ???

Hors ligne

#18 Le 26/04/2017, à 19:43

tarkan99

Re : [Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

as-tu enlevé les # devant :

HandleSuspendKey=ignore
HandleLidSwitch= ignore

si la mise en veille revient, fait la modif ci dessus et redémarre.

d'autre part, via le bisnext, je vois que tu as pas mal de retard sur les mises à jour.

à faire via

sudo apt update
sudo apt upgrade

Dernière modification par tarkan99 (Le 26/04/2017, à 19:47)


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#19 Le 26/04/2017, à 21:32

renlo

Re : [Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

non je n'ai pas enlevé les #. mais après 2 ou 3 démarrage, il ne se met plus en veille après 10 minutes. peut-être qu'il lui fallait plusieurs démarrages pour le prendre en compte ?
sur le rapport de "cat /etc/systemd/logind.conf" on vois que c'est en "ignore" et il y a les # qui sont devant.
tu veux que j'enlève les # ?

il me cause en français. comme il se m'était en veille tout le temps, je n'avais pas pu faire les maj ni le téléchargement du paquet en français. c'est bizare qu'il me parlais à moitié en français et l'autre moitié en anglais.

j'ai l'impression que ça avance.
- je peut l'éteindre normalement.
- ça fais 1h30 qu'il tourne sans s'être mis en veille (le temps de la maj).
- le petit bémols c'est au démarrage. il se met toujours en veille, une fois,  pendant le lancement de lubuntu.
"après maj" 1er démarrage; 2 mise en veille; 2ème démarrage 1 mise en veille; 3ème démarrage 1 mise en veille
- pour le problème d'internet. ça viendrais plutôt de la bbox, ou de l'ordi ?

Hors ligne

#20 Le 27/04/2017, à 05:12

tarkan99

Re : [Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

si la mise en veille continue, alors oui, enlève les #.

pour ton soucis d'internet, je te conseille de démarrer un nouveau sujet, dans le bon sous forum.


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#21 Le 02/05/2017, à 13:06

renlo

Re : [Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

salut

j'ai enlevé les #.
il démarre normalement (plus de mise en veille au démarrage).

un grand merci à vous et spécialement à tarkan99.

Hors ligne

#22 Le 02/05/2017, à 20:19

tarkan99

Re : [Résolu] problème d'installation (lubuntu) sur toshiba satellite P30

de rien

pense à mettre résolu dans le sujet (à raccourcir si besoin) !


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne